--- crypto/openssl/CHANGES.orig +++ crypto/openssl/CHANGES @@ -2,6 +2,67 @@ OpenSSL CHANGES _______________ + Changes between 1.0.2j and 1.0.2k [26 Jan 2017] + + *) Truncated packet could crash via OOB read + + If one side of an SSL/TLS path is running on a 32-bit host and a specific + cipher is being used, then a truncated packet can cause that host to + perform an out-of-bounds read, usually resulting in a crash. + + This issue was reported to OpenSSL by Robert Święcki of Google. + (CVE-2017-3731) + [Andy Polyakov] + + *) BN_mod_exp may produce incorrect results on x86_64 + + There is a carry propagating bug in the x86_64 Montgomery squaring + procedure. No EC algorithms are affected. Analysis suggests that attacks + against RSA and DSA as a result of this defect would be very difficult to + perform and are not believed likely. Attacks against DH are considered just + feasible (although very difficult) because most of the work necessary to + deduce information about a private key may be performed offline. The amount + of resources required for such an attack would be very significant and + likely only accessible to a limited number of attackers. An attacker would + additionally need online access to an unpatched system using the target + private key in a scenario with persistent DH parameters and a private + key that is shared between multiple clients. For example this can occur by + default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very + similar to CVE-2015-3193 but must be treated as a separate problem. + + This issue was reported to OpenSSL by the OSS-Fuzz project. + (CVE-2017-3732) + [Andy Polyakov] + + *) Montgomery multiplication may produce incorrect results + + There is a carry propagating bug in the Broadwell-specific Montgomery + multiplication procedure that handles input lengths divisible by, but + longer than 256 bits. Analysis suggests that attacks against RSA, DSA + and DH private keys are impossible. This is because the subroutine in + question is not used in operations with the private key itself and an input + of the attacker's direct choice. Otherwise the bug can manifest itself as + transient authentication and key negotiation failures or reproducible + erroneous outcome of public-key operations with specially crafted input. + Among EC algorithms only Brainpool P-512 curves are affected and one + presumably can attack ECDH key negotiation. Impact was not analyzed in + detail, because pre-requisites for attack are considered unlikely. Namely + multiple clients have to choose the curve in question and the server has to + share the private key among them, neither of which is default behaviour. + Even then only clients that chose the curve will be affected. + + This issue was publicly reported as transient failures and was not + initially recognized as a security issue. Thanks to Richard Morgan for + providing reproducible case. + (CVE-2016-7055) + [Andy Polyakov] + + *) OpenSSL now fails if it receives an unrecognised record type in TLS1.0 + or TLS1.1. Previously this only happened in SSLv3 and TLS1.2. This is to + prevent issues where no progress is being made and the peer continually + sends unrecognised record types, using up resources processing them. + [Matt Caswell] + Changes between 1.0.2i and 1.0.2j [26 Sep 2016] *) Missing CRL sanity check --- crypto/openssl/CONTRIBUTING.orig +++ crypto/openssl/CONTRIBUTING @@ -1,4 +1,4 @@ -HOW TO CONTRIBUTE TO PATCHES OpenSSL +HOW TO CONTRIBUTE PATCHES TO OpenSSL ------------------------------------ (Please visit https://www.openssl.org/community/getting-started.html for @@ -11,35 +11,13 @@ list first. Someone may be already working on the same thing or there may be a good reason as to why that feature isn't implemented. -The best way to submit a patch is to make a pull request on GitHub. -(It is not necessary to send mail to rt@openssl.org to open a ticket!) -If you think the patch could use feedback from the community, please -start a thread on openssl-dev. +To submit a patch, make a pull request on GitHub. If you think the patch +could use feedback from the community, please start a thread on openssl-dev +to discuss it. -You can also submit patches by sending it as mail to rt@openssl.org. -Please include the word "PATCH" and an explanation of what the patch -does in the subject line. If you do this, our preferred format is "git -format-patch" output. For example to provide a patch file containing the -last commit in your local git repository use the following command: +Having addressed the following items before the PR will help make the +acceptance and review process faster: - % git format-patch --stdout HEAD^ >mydiffs.patch - -Another method of creating an acceptable patch file without using git is as -follows: - - % cd openssl-work - ...make your changes... - % ./Configure dist; make clean - % cd .. - % diff -ur openssl-orig openssl-work >mydiffs.patch - -Note that pull requests are generally easier for the team, and community, to -work with. Pull requests benefit from all of the standard GitHub features, -including code review tools, simpler integration, and CI build support. - -No matter how a patch is submitted, the following items will help make -the acceptance and review process faster: - 1. Anything other than trivial contributions will require a contributor licensing agreement, giving us permission to use your code. See https://www.openssl.org/policies/cla.html for details. @@ -55,10 +33,9 @@ in the file LICENSE in the source distribution or at https://www.openssl.org/source/license.html - 3. Patches should be as current as possible. When using GitHub, please - expect to have to rebase and update often. Note that we do not accept merge - commits. You will be asked to remove them before a patch is considered - acceptable. + 3. Patches should be as current as possible; expect to have to rebase + often. We do not accept merge commits; You will be asked to remove + them before a patch is considered acceptable. 4. Patches should follow our coding style (see https://www.openssl.org/policies/codingstyle.html) and compile without @@ -65,11 +42,13 @@ warnings. Where gcc or clang is availble you should use the --strict-warnings Configure option. OpenSSL compiles on many varied platforms: try to ensure you only use portable features. + Clean builds via Travis and AppVeyor are expected, and done whenever + a PR is created or updated. - 5. When at all possible, patches should include tests. These can either be - added to an existing test, or completely new. Please see test/README - for information on the test framework. + 5. When at all possible, patches should include tests. These can + either be added to an existing test, or completely new. Please see + test/README for information on the test framework. - 6. New features or changed functionality must include documentation. Please - look at the "pod" files in doc/apps, doc/crypto and doc/ssl for examples of - our style. + 6. New features or changed functionality must include + documentation. Please look at the "pod" files in doc/apps, doc/crypto + and doc/ssl for examples of our style. --- crypto/openssl/Configure.orig +++ crypto/openssl/Configure @@ -7,6 +7,7 @@ require 5.000; use strict; +use File::Compare; # see INSTALL for instructions. @@ -57,12 +58,13 @@ # zlib-dynamic Like "zlib", but the zlib library is expected to be a shared # library and will be loaded in run-time by the OpenSSL library. # sctp include SCTP support -# 386 generate 80386 code # enable-weak-ssl-ciphers # Enable EXPORT and LOW SSLv3 ciphers that are disabled by # default. Note, weak SSLv2 ciphers are unconditionally # disabled. -# no-sse2 disables IA-32 SSE2 code, above option implies no-sse2 +# 386 generate 80386 code in assembly modules +# no-sse2 disables IA-32 SSE2 code in assembly modules, the above +# mentioned '386' option implies this one # no- build without specified algorithm (rsa, idea, rc5, ...) # - + compiler options are passed through # @@ -1792,8 +1794,16 @@ } close(IN); close(OUT); -rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile; -rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n"; +if ((compare($Makefile, "$Makefile.new")) + or file_newer('Configure', $Makefile) + or file_newer('config', $Makefile) + or file_newer('Makefile.org', $Makefile)) + { + rename($Makefile,"$Makefile.bak") || die "unable to rename $Makefile\n" if -e $Makefile; + rename("$Makefile.new",$Makefile) || die "unable to rename $Makefile.new\n"; + } +else + { unlink("$Makefile.new"); } print "CC =$cc\n"; print "CFLAG =$cflags\n"; @@ -1985,10 +1995,14 @@ print OUT "}\n"; print OUT "#endif\n"; close(OUT); -rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h"; -rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n"; +if (compare("crypto/opensslconf.h.new","crypto/opensslconf.h")) + { + rename("crypto/opensslconf.h","crypto/opensslconf.h.bak") || die "unable to rename crypto/opensslconf.h\n" if -e "crypto/opensslconf.h"; + rename("crypto/opensslconf.h.new","crypto/opensslconf.h") || die "unable to rename crypto/opensslconf.h.new\n"; + } +else + { unlink("crypto/opensslconf.h.new"); } - # Fix the date print "SIXTY_FOUR_BIT_LONG mode\n" if $b64l; @@ -2289,3 +2303,9 @@ print STDERR "No sanity errors detected!\n" if $errorcnt == 0; return $errorcnt; } + +sub file_newer + { + my ($file1, $file2) = @_; + return (stat($file1))[9] > (stat($file2))[9] + } --- crypto/openssl/INSTALL.orig +++ crypto/openssl/INSTALL @@ -74,24 +74,26 @@ no-asm Do not use assembler code. - 386 Use the 80386 instruction set only (the default x86 code is - more efficient, but requires at least a 486). Note: Use - compiler flags for any other CPU specific configuration, - e.g. "-m32" to build x86 code on an x64 system. + 386 In 32-bit x86 builds, when generating assembly modules, + use the 80386 instruction set only (the default x86 code + is more efficient, but requires at least a 486). Note: + This doesn't affect code generated by compiler, you're + likely to complement configuration command line with + suitable compiler-specific option. - no-sse2 Exclude SSE2 code pathes. Normally SSE2 extention is - detected at run-time, but the decision whether or not the - machine code will be executed is taken solely on CPU - capability vector. This means that if you happen to run OS - kernel which does not support SSE2 extension on Intel P4 - processor, then your application might be exposed to - "illegal instruction" exception. There might be a way - to enable support in kernel, e.g. FreeBSD kernel can be - compiled with CPU_ENABLE_SSE, and there is a way to - disengage SSE2 code pathes upon application start-up, - but if you aim for wider "audience" running such kernel, - consider no-sse2. Both 386 and no-asm options above imply - no-sse2. + no-sse2 Exclude SSE2 code paths from 32-bit x86 assembly modules. + Normally SSE2 extension is detected at run-time, but the + decision whether or not the machine code will be executed + is taken solely on CPU capability vector. This means that + if you happen to run OS kernel which does not support SSE2 + extension on Intel P4 processor, then your application + might be exposed to "illegal instruction" exception. + There might be a way to enable support in kernel, e.g. + FreeBSD kernel can be compiled with CPU_ENABLE_SSE, and + there is a way to disengage SSE2 code paths upon application + start-up, but if you aim for wider "audience" running + such kernel, consider no-sse2. Both the 386 and + no-asm options imply no-sse2. no- Build without the specified cipher (bf, cast, des, dh, dsa, hmac, md2, md5, mdc2, rc2, rc4, rc5, rsa, sha). @@ -101,7 +103,12 @@ -Dxxx, -lxxx, -Lxxx, -fxxx, -mXXX, -Kxxx These system specific options will be passed through to the compiler to allow you to define preprocessor symbols, specify additional libraries, - library directories or other compiler options. + library directories or other compiler options. It might be + worth noting that some compilers generate code specifically + for processor the compiler currently executes on. This is + not necessarily what you might have in mind, since it might + be unsuitable for execution on other, typically older, + processor. Consult your compiler documentation. -DHAVE_CRYPTODEV Enable the BSD cryptodev engine even if we are not using BSD. Useful if you are running ocf-linux or something @@ -159,18 +166,18 @@ OpenSSL binary ("openssl"). The libraries will be built in the top-level directory, and the binary will be in the "apps" directory. - If "make" fails, look at the output. There may be reasons for - the failure that aren't problems in OpenSSL itself (like missing - standard headers). If it is a problem with OpenSSL itself, please - report the problem to (note that your - message will be recorded in the request tracker publicly readable - at https://www.openssl.org/community/index.html#bugs and will be - forwarded to a public mailing list). Include the output of "make - report" in your message. Please check out the request tracker. Maybe - the bug was already reported or has already been fixed. + If the build fails, look at the output. There may be reasons + for the failure that aren't problems in OpenSSL itself (like + missing standard headers). If you are having problems you can + get help by sending an email to the openssl-users email list (see + https://www.openssl.org/community/mailinglists.html for details). If + it is a bug with OpenSSL itself, please open an issue on GitHub, at + https://github.com/openssl/openssl/issues. Please review the existing + ones first; maybe the bug was already reported or has already been + fixed. - [If you encounter assembler error messages, try the "no-asm" - configuration option as an immediate fix.] + (If you encounter assembler error messages, try the "no-asm" + configuration option as an immediate fix.) Compiling parts of OpenSSL with gcc and others with the system compiler will result in unresolved symbols on some systems. --- crypto/openssl/Makefile.orig +++ crypto/openssl/Makefile @@ -4,7 +4,7 @@ ## Makefile for OpenSSL ## -VERSION=1.0.2j +VERSION=1.0.2k MAJOR=1 MINOR=0.2 SHLIB_VERSION_NUMBER=1.0.0 @@ -203,7 +203,8 @@ $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \ $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \ $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \ - $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS} + $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS} \ + $${APPS+APPS} # LC_ALL=C ensures that error [and other] messages are delivered in # same language for uniform treatment. --- crypto/openssl/Makefile.org.orig +++ crypto/openssl/Makefile.org @@ -201,7 +201,8 @@ $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS} \ $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS} $${SCRIPTS+SCRIPTS} \ $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS} \ - $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS} + $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS} \ + $${APPS+APPS} # LC_ALL=C ensures that error [and other] messages are delivered in # same language for uniform treatment. --- crypto/openssl/NEWS.orig +++ crypto/openssl/NEWS @@ -5,9 +5,15 @@ This file gives a brief overview of the major changes between each OpenSSL release. For more details please read the CHANGES file. + Major changes between OpenSSL 1.0.2j and OpenSSL 1.0.2k [26 Jan 2017] + + o Truncated packet could crash via OOB read (CVE-2017-3731) + o BN_mod_exp may produce incorrect results on x86_64 (CVE-2017-3732) + o Montgomery multiplication may produce incorrect results (CVE-2016-7055) + Major changes between OpenSSL 1.0.2i and OpenSSL 1.0.2j [26 Sep 2016] - o Fix Use After Free for large message sizes (CVE-2016-6309) + o Missing CRL sanity check (CVE-2016-7052) Major changes between OpenSSL 1.0.2h and OpenSSL 1.0.2i [22 Sep 2016] --- crypto/openssl/README.orig +++ crypto/openssl/README @@ -1,5 +1,5 @@ - OpenSSL 1.0.2j 26 Sep 2016 + OpenSSL 1.0.2k 26 Jan 2017 Copyright (c) 1998-2015 The OpenSSL Project Copyright (c) 1995-1998 Eric A. Young, Tim J. Hudson @@ -66,13 +66,13 @@ If you have any problems with OpenSSL then please take the following steps first: - - Download the current snapshot from ftp://ftp.openssl.org/snapshot/ + - Download the latest version from the repository to see if the problem has already been addressed - - Remove ASM versions of libraries + - Configure with no-asm - Remove compiler optimisation flags - If you wish to report a bug then please include the following information in - any bug report: + If you wish to report a bug then please include the following information + and create an issue on GitHub: - On Unix systems: Self-test report generated by 'make report' @@ -84,27 +84,9 @@ - Problem Description (steps that will reproduce the problem, if known) - Stack Traceback (if the application dumps core) - Email the report to: - - rt@openssl.org - - In order to avoid spam, this is a moderated mailing list, and it might - take a day for the ticket to show up. (We also scan posts to make sure - that security disclosures aren't publically posted by mistake.) Mail - to this address is recorded in the public RT (request tracker) database - (see https://www.openssl.org/community/index.html#bugs for details) and - also forwarded the public openssl-dev mailing list. Confidential mail - may be sent to openssl-security@openssl.org (PGP key available from the - key servers). - - Please do NOT use this for general assistance or support queries. Just because something doesn't work the way you expect does not mean it is necessarily a bug in OpenSSL. - You can also make GitHub pull requests. If you do this, please also send - mail to rt@openssl.org with a link to the PR so that we can more easily - keep track of it. - HOW TO CONTRIBUTE TO OpenSSL ---------------------------- @@ -113,7 +95,7 @@ LEGALITIES ---------- - A number of nations, in particular the U.S., restrict the use or export - of cryptography. If you are potentially subject to such restrictions - you should seek competent professional legal advice before attempting to - develop or distribute cryptographic code. + A number of nations restrict the use or export of cryptography. If you + are potentially subject to such restrictions you should seek competent + professional legal advice before attempting to develop or distribute + cryptographic code. --- crypto/openssl/apps/apps.c.orig +++ crypto/openssl/apps/apps.c @@ -972,7 +972,10 @@ if (!e) BIO_printf(err, "no engine specified\n"); else { - pkey = ENGINE_load_private_key(e, file, ui_method, &cb_data); + if (ENGINE_init(e)) { + pkey = ENGINE_load_private_key(e, file, ui_method, &cb_data); + ENGINE_finish(e); + } if (!pkey) { BIO_printf(err, "cannot load %s from engine\n", key_descrip); ERR_print_errors(err); @@ -1532,11 +1535,13 @@ } return e; } +#endif ENGINE *setup_engine(BIO *err, const char *engine, int debug) { ENGINE *e = NULL; +#ifndef OPENSSL_NO_ENGINE if (engine) { if (strcmp(engine, "auto") == 0) { BIO_printf(err, "enabling auto ENGINE support\n"); @@ -1561,13 +1566,19 @@ } BIO_printf(err, "engine \"%s\" set.\n", ENGINE_get_id(e)); + } +#endif + return e; +} +void release_engine(ENGINE *e) +{ +#ifndef OPENSSL_NO_ENGINE + if (e != NULL) /* Free our "structural" reference. */ ENGINE_free(e); - } - return e; +#endif } -#endif int load_config(BIO *err, CONF *cnf) { --- crypto/openssl/apps/apps.h.orig +++ crypto/openssl/apps/apps.h @@ -259,9 +259,9 @@ const char *pass, ENGINE *e, const char *cert_descrip); X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath); -# ifndef OPENSSL_NO_ENGINE + ENGINE *setup_engine(BIO *err, const char *engine, int debug); -# endif +void release_engine(ENGINE *e); # ifndef OPENSSL_NO_OCSP OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req, --- crypto/openssl/apps/ca.c.orig +++ crypto/openssl/apps/ca.c @@ -319,9 +319,7 @@ #define BSIZE 256 MS_STATIC char buf[3][BSIZE]; char *randfile = NULL; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif char *tofree = NULL; DB_ATTR db_attr; @@ -595,9 +593,7 @@ if (!load_config(bio_err, conf)) goto err; -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif /* Lets get the config section we are using */ if (section == NULL) { @@ -1485,6 +1481,7 @@ X509_CRL_free(crl); NCONF_free(conf); NCONF_free(extconf); + release_engine(e); OBJ_cleanup(); apps_shutdown(); OPENSSL_EXIT(ret); @@ -2227,7 +2224,6 @@ sk = CONF_get_section(parms, "default"); if (sk_CONF_VALUE_num(sk) == 0) { BIO_printf(bio_err, "no name/value pairs found in %s\n", infile); - CONF_free(parms); goto err; } --- crypto/openssl/apps/cms.c.orig +++ crypto/openssl/apps/cms.c @@ -143,9 +143,7 @@ const EVP_MD *sign_md = NULL; int informat = FORMAT_SMIME, outformat = FORMAT_SMIME; int rctformat = FORMAT_SMIME, keyform = FORMAT_PEM; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif unsigned char *secret_key = NULL, *secret_keyid = NULL; unsigned char *pwri_pass = NULL, *pwri_tmp = NULL; size_t secret_keylen = 0, secret_keyidlen = 0; @@ -665,9 +663,7 @@ "cert.pem recipient certificate(s) for encryption\n"); goto end; } -# ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -# endif if (!app_passwd(bio_err, passargin, NULL, &passin, NULL)) { BIO_printf(bio_err, "Error getting password\n"); @@ -1170,6 +1166,7 @@ EVP_PKEY_free(key); CMS_ContentInfo_free(cms); CMS_ContentInfo_free(rcms); + release_engine(e); BIO_free(rctin); BIO_free(in); BIO_free(indata); --- crypto/openssl/apps/dgst.c.orig +++ crypto/openssl/apps/dgst.c @@ -537,6 +537,7 @@ OPENSSL_free(sigbuf); if (bmd != NULL) BIO_free(bmd); + release_engine(e); apps_shutdown(); OPENSSL_EXIT(err); } --- crypto/openssl/apps/dh.c.orig +++ crypto/openssl/apps/dh.c @@ -94,9 +94,7 @@ BIO *in = NULL, *out = NULL; int informat, outformat, check = 0, noout = 0, C = 0, ret = 1; char *infile, *outfile, *prog; -# ifndef OPENSSL_NO_ENGINE char *engine; -# endif apps_startup(); @@ -107,9 +105,7 @@ if (!load_config(bio_err, NULL)) goto end; -# ifndef OPENSSL_NO_ENGINE engine = NULL; -# endif infile = NULL; outfile = NULL; informat = FORMAT_PEM; @@ -183,9 +179,7 @@ ERR_load_crypto_strings(); -# ifndef OPENSSL_NO_ENGINE setup_engine(bio_err, engine, 0); -# endif in = BIO_new(BIO_s_file()); out = BIO_new(BIO_s_file()); --- crypto/openssl/apps/dhparam.c.orig +++ crypto/openssl/apps/dhparam.c @@ -159,9 +159,8 @@ int informat, outformat, check = 0, noout = 0, C = 0, ret = 1; char *infile, *outfile, *prog; char *inrand = NULL; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif + ENGINE *e = NULL; int num = 0, g = 0; apps_startup(); @@ -270,9 +269,7 @@ ERR_load_crypto_strings(); -# ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -# endif + e = setup_engine(bio_err, engine, 0); if (g && !num) num = DEFBITS; @@ -512,6 +509,7 @@ BIO_free_all(out); if (dh != NULL) DH_free(dh); + release_engine(e); apps_shutdown(); OPENSSL_EXIT(ret); } --- crypto/openssl/apps/dsa.c.orig +++ crypto/openssl/apps/dsa.c @@ -106,9 +106,7 @@ int informat, outformat, text = 0, noout = 0; int pubin = 0, pubout = 0; char *infile, *outfile, *prog; -# ifndef OPENSSL_NO_ENGINE char *engine; -# endif char *passargin = NULL, *passargout = NULL; char *passin = NULL, *passout = NULL; int modulus = 0; @@ -124,9 +122,7 @@ if (!load_config(bio_err, NULL)) goto end; -# ifndef OPENSSL_NO_ENGINE engine = NULL; -# endif infile = NULL; outfile = NULL; informat = FORMAT_PEM; @@ -239,9 +235,7 @@ ERR_load_crypto_strings(); -# ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -# endif if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) { BIO_printf(bio_err, "Error getting passwords\n"); @@ -358,6 +352,7 @@ BIO_free_all(out); if (dsa != NULL) DSA_free(dsa); + release_engine(e); if (passin) OPENSSL_free(passin); if (passout) --- crypto/openssl/apps/dsaparam.c.orig +++ crypto/openssl/apps/dsaparam.c @@ -121,9 +121,8 @@ char *infile, *outfile, *prog, *inrand = NULL; int numbits = -1, num, genkey = 0; int need_rand = 0; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif + ENGINE *e = NULL; # ifdef GENCB_TEST int timebomb = 0; # endif @@ -263,9 +262,7 @@ } } -# ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -# endif + e = setup_engine(bio_err, engine, 0); if (need_rand) { app_RAND_load_file(NULL, bio_err, (inrand != NULL)); @@ -433,6 +430,7 @@ BIO_free_all(out); if (dsa != NULL) DSA_free(dsa); + release_engine(e); apps_shutdown(); OPENSSL_EXIT(ret); } --- crypto/openssl/apps/ec.c.orig +++ crypto/openssl/apps/ec.c @@ -95,6 +95,7 @@ int informat, outformat, text = 0, noout = 0; int pubin = 0, pubout = 0, param_out = 0; char *infile, *outfile, *prog, *engine; + ENGINE *e = NULL; char *passargin = NULL, *passargout = NULL; char *passin = NULL, *passout = NULL; point_conversion_form_t form = POINT_CONVERSION_UNCOMPRESSED; @@ -235,9 +236,7 @@ ERR_load_crypto_strings(); -# ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -# endif + e = setup_engine(bio_err, engine, 0); if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) { BIO_printf(bio_err, "Error getting passwords\n"); @@ -349,6 +348,7 @@ BIO_free_all(out); if (eckey) EC_KEY_free(eckey); + release_engine(e); if (passin) OPENSSL_free(passin); if (passout) --- crypto/openssl/apps/ecparam.c.orig +++ crypto/openssl/apps/ecparam.c @@ -131,6 +131,7 @@ BIO *in = NULL, *out = NULL; int informat, outformat, noout = 0, C = 0, ret = 1; char *engine = NULL; + ENGINE *e = NULL; BIGNUM *ec_p = NULL, *ec_a = NULL, *ec_b = NULL, *ec_gen = NULL, *ec_order = NULL, *ec_cofactor = NULL; @@ -311,9 +312,7 @@ } } -# ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -# endif + e = setup_engine(bio_err, engine, 0); if (list_curves) { EC_builtin_curve *curves = NULL; @@ -620,12 +619,13 @@ BN_free(ec_cofactor); if (buffer) OPENSSL_free(buffer); + if (group != NULL) + EC_GROUP_free(group); + release_engine(e); if (in != NULL) BIO_free(in); if (out != NULL) BIO_free_all(out); - if (group != NULL) - EC_GROUP_free(group); apps_shutdown(); OPENSSL_EXIT(ret); } --- crypto/openssl/apps/enc.c.orig +++ crypto/openssl/apps/enc.c @@ -126,9 +126,8 @@ NULL, *wbio = NULL; #define PROG_NAME_SIZE 39 char pname[PROG_NAME_SIZE + 1]; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif + ENGINE *e = NULL; const EVP_MD *dgst = NULL; int non_fips_allow = 0; @@ -322,9 +321,7 @@ argv++; } -#ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -#endif + e = setup_engine(bio_err, engine, 0); if (cipher && EVP_CIPHER_flags(cipher) & EVP_CIPH_FLAG_AEAD_CIPHER) { BIO_printf(bio_err, @@ -674,6 +671,7 @@ if (bzl != NULL) BIO_free(bzl); #endif + release_engine(e); if (pass) OPENSSL_free(pass); apps_shutdown(); --- crypto/openssl/apps/gendh.c.orig +++ crypto/openssl/apps/gendh.c @@ -96,9 +96,7 @@ int g = 2; char *outfile = NULL; char *inrand = NULL; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif BIO *out = NULL; apps_startup(); @@ -162,9 +160,7 @@ BIO_printf(bio_err, " the random number generator\n"); goto end; } -# ifndef OPENSSL_NO_ENGINE setup_engine(bio_err, engine, 0); -# endif out = BIO_new(BIO_s_file()); if (out == NULL) { --- crypto/openssl/apps/gendsa.c.orig +++ crypto/openssl/apps/gendsa.c @@ -85,9 +85,8 @@ char *passargout = NULL, *passout = NULL; BIO *out = NULL, *in = NULL; const EVP_CIPHER *enc = NULL; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif + ENGINE *e = NULL; apps_startup(); @@ -206,9 +205,7 @@ " - a DSA parameter file as generated by the dsaparam command\n"); goto end; } -# ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -# endif + e = setup_engine(bio_err, engine, 0); if (!app_passwd(bio_err, NULL, passargout, NULL, &passout)) { BIO_printf(bio_err, "Error getting password\n"); @@ -273,6 +270,7 @@ BIO_free_all(out); if (dsa != NULL) DSA_free(dsa); + release_engine(e); if (passout) OPENSSL_free(passout); apps_shutdown(); --- crypto/openssl/apps/genpkey.c.orig +++ crypto/openssl/apps/genpkey.c @@ -275,9 +275,9 @@ if (out) BIO_free_all(out); BIO_free(in); + release_engine(e); if (pass) OPENSSL_free(pass); - return ret; } --- crypto/openssl/apps/genrsa.c.orig +++ crypto/openssl/apps/genrsa.c @@ -91,9 +91,7 @@ int MAIN(int argc, char **argv) { BN_GENCB cb; -# ifndef OPENSSL_NO_ENGINE ENGINE *e = NULL; -# endif int ret = 1; int i, num = DEFBITS; long l; @@ -101,9 +99,7 @@ unsigned long f4 = RSA_F4; char *outfile = NULL; char *passargout = NULL, *passout = NULL; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif char *inrand = NULL; BIO *out = NULL; BIGNUM *bn = BN_new(); @@ -240,9 +236,7 @@ BIO_printf(bio_err, "Error getting password\n"); goto err; } -# ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -# endif if (outfile == NULL) { BIO_set_fp(out, stdout, BIO_NOCLOSE); @@ -314,6 +308,7 @@ RSA_free(rsa); if (out) BIO_free_all(out); + release_engine(e); if (passout) OPENSSL_free(passout); if (ret != 0) --- crypto/openssl/apps/pkcs12.c.orig +++ crypto/openssl/apps/pkcs12.c @@ -129,9 +129,7 @@ char *inrand = NULL; char *macalg = NULL; char *CApath = NULL, *CAfile = NULL; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif apps_startup(); @@ -406,9 +404,7 @@ "-LMK Add local machine keyset attribute to private key\n"); goto end; } -# ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -# endif if (passarg) { if (export_cert) @@ -756,6 +752,7 @@ # ifdef CRYPTO_MDEBUG CRYPTO_remove_all_info(); # endif + release_engine(e); BIO_free(in); BIO_free_all(out); if (canames) @@ -1110,4 +1107,6 @@ return 1; } +#else +static void *dummy = &dummy; #endif --- crypto/openssl/apps/pkcs7.c.orig +++ crypto/openssl/apps/pkcs7.c @@ -90,9 +90,8 @@ char *infile, *outfile, *prog; int print_certs = 0, text = 0, noout = 0, p7_print = 0; int ret = 1; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif + ENGINE *e = NULL; apps_startup(); @@ -175,9 +174,7 @@ ERR_load_crypto_strings(); -#ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -#endif + e = setup_engine(bio_err, engine, 0); in = BIO_new(BIO_s_file()); out = BIO_new(BIO_s_file()); @@ -303,6 +300,7 @@ end: if (p7 != NULL) PKCS7_free(p7); + release_engine(e); if (in != NULL) BIO_free(in); if (out != NULL) --- crypto/openssl/apps/pkcs8.c.orig +++ crypto/openssl/apps/pkcs8.c @@ -87,9 +87,7 @@ char pass[50], *passin = NULL, *passout = NULL, *p8pass = NULL; int badarg = 0; int ret = 1; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif if (bio_err == NULL) bio_err = BIO_new_fp(stderr, BIO_NOCLOSE); @@ -223,9 +221,7 @@ #endif goto end; } -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) { BIO_printf(bio_err, "Error getting passwords\n"); @@ -391,6 +387,7 @@ X509_SIG_free(p8); PKCS8_PRIV_KEY_INFO_free(p8inf); EVP_PKEY_free(pkey); + release_engine(e); BIO_free_all(out); BIO_free(in); if (passin) --- crypto/openssl/apps/pkey.c.orig +++ crypto/openssl/apps/pkey.c @@ -79,9 +79,7 @@ EVP_PKEY *pkey = NULL; char *passin = NULL, *passout = NULL; int badarg = 0; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif int ret = 1; if (bio_err == NULL) @@ -178,9 +176,7 @@ #endif return 1; } -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) { BIO_printf(bio_err, "Error getting passwords\n"); @@ -240,6 +236,7 @@ end: EVP_PKEY_free(pkey); + release_engine(e); BIO_free_all(out); BIO_free(in); if (passin) --- crypto/openssl/apps/pkeyparam.c.orig +++ crypto/openssl/apps/pkeyparam.c @@ -74,9 +74,8 @@ int text = 0, noout = 0; EVP_PKEY *pkey = NULL; int badarg = 0; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif + ENGINE *e = NULL; int ret = 1; if (bio_err == NULL) @@ -134,9 +133,7 @@ #endif return 1; } -#ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -#endif + e = setup_engine(bio_err, engine, 0); if (infile) { if (!(in = BIO_new_file(infile, "r"))) { @@ -178,6 +175,7 @@ end: EVP_PKEY_free(pkey); + release_engine(e); BIO_free_all(out); BIO_free(in); --- crypto/openssl/apps/pkeyutl.c.orig +++ crypto/openssl/apps/pkeyutl.c @@ -357,6 +357,7 @@ end: if (ctx) EVP_PKEY_CTX_free(ctx); + release_engine(e); BIO_free(in); BIO_free_all(out); if (buf_in != NULL) --- crypto/openssl/apps/prime.c.orig +++ crypto/openssl/apps/prime.c @@ -128,16 +128,24 @@ BIO_printf(bio_out, "%s\n", s); OPENSSL_free(s); } else { + int r; + if (hex) - BN_hex2bn(&bn, argv[0]); + r = BN_hex2bn(&bn, argv[0]); else - BN_dec2bn(&bn, argv[0]); + r = BN_dec2bn(&bn, argv[0]); + if(!r) { + BIO_printf(bio_err, "Failed to process value (%s)\n", argv[0]); + goto end; + } + BN_print(bio_out, bn); BIO_printf(bio_out, " is %sprime\n", BN_is_prime_ex(bn, checks, NULL, NULL) ? "" : "not "); } + end: BN_free(bn); BIO_free_all(bio_out); --- crypto/openssl/apps/rand.c.orig +++ crypto/openssl/apps/rand.c @@ -86,9 +86,8 @@ int hex = 0; BIO *out = NULL; int num = -1; -#ifndef OPENSSL_NO_ENGINE + ENGINE *e = NULL; char *engine = NULL; -#endif apps_startup(); @@ -162,9 +161,7 @@ BIO_printf(bio_err, "-hex - hex encode output\n"); goto err; } -#ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -#endif + e = setup_engine(bio_err, engine, 0); app_RAND_load_file(NULL, bio_err, (inrand != NULL)); if (inrand != NULL) @@ -222,6 +219,7 @@ err: ERR_print_errors(bio_err); + release_engine(e); if (out) BIO_free_all(out); apps_shutdown(); --- crypto/openssl/apps/req.c.orig +++ crypto/openssl/apps/req.c @@ -179,9 +179,7 @@ int nodes = 0, kludge = 0, newhdr = 0, subject = 0, pubkey = 0; char *infile, *outfile, *prog, *keyfile = NULL, *template = NULL, *keyout = NULL; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif char *extensions = NULL; char *req_exts = NULL; const EVP_CIPHER *cipher = NULL; @@ -595,9 +593,7 @@ if ((in == NULL) || (out == NULL)) goto end; -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif if (keyfile != NULL) { pkey = load_key(bio_err, keyfile, keyform, 0, passin, e, @@ -1040,6 +1036,7 @@ X509_REQ_free(req); X509_free(x509ss); ASN1_INTEGER_free(serial); + release_engine(e); if (passargin && passin) OPENSSL_free(passin); if (passargout && passout) --- crypto/openssl/apps/rsa.c.orig +++ crypto/openssl/apps/rsa.c @@ -111,9 +111,7 @@ char *infile, *outfile, *prog; char *passargin = NULL, *passargout = NULL; char *passin = NULL, *passout = NULL; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif int modulus = 0; int pvk_encr = 2; @@ -254,9 +252,7 @@ ERR_load_crypto_strings(); -# ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -# endif if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) { BIO_printf(bio_err, "Error getting passwords\n"); @@ -419,6 +415,7 @@ } else ret = 0; end: + release_engine(e); if (out != NULL) BIO_free_all(out); if (rsa != NULL) --- crypto/openssl/apps/rsautl.c.orig +++ crypto/openssl/apps/rsautl.c @@ -88,9 +88,7 @@ ENGINE *e = NULL; BIO *in = NULL, *out = NULL; char *infile = NULL, *outfile = NULL; -# ifndef OPENSSL_NO_ENGINE char *engine = NULL; -# endif char *keyfile = NULL; char rsa_mode = RSA_VERIFY, key_type = KEY_PRIVKEY; int keyform = FORMAT_PEM; @@ -195,9 +193,7 @@ BIO_printf(bio_err, "A private key is needed for this operation\n"); goto end; } -# ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -# endif if (!app_passwd(bio_err, passargin, NULL, &passin, NULL)) { BIO_printf(bio_err, "Error getting password\n"); goto end; @@ -327,6 +323,7 @@ BIO_write(out, rsa_out, rsa_outlen); end: RSA_free(rsa); + release_engine(e); BIO_free(in); BIO_free_all(out); if (rsa_in) --- crypto/openssl/apps/s_cb.c.orig +++ crypto/openssl/apps/s_cb.c @@ -548,12 +548,12 @@ if (cmd == (BIO_CB_READ | BIO_CB_RETURN)) { BIO_printf(out, "read from %p [%p] (%lu bytes => %ld (0x%lX))\n", - (void *)bio, argp, (unsigned long)argi, ret, ret); + (void *)bio, (void *)argp, (unsigned long)argi, ret, ret); BIO_dump(out, argp, (int)ret); return (ret); } else if (cmd == (BIO_CB_WRITE | BIO_CB_RETURN)) { BIO_printf(out, "write to %p [%p] (%lu bytes => %ld (0x%lX))\n", - (void *)bio, argp, (unsigned long)argi, ret, ret); + (void *)bio, (void *)argp, (unsigned long)argi, ret, ret); BIO_dump(out, argp, (int)ret); } return (ret); --- crypto/openssl/apps/s_client.c.orig +++ crypto/openssl/apps/s_client.c @@ -694,12 +694,12 @@ char *inrand = NULL; int mbuf_len = 0; struct timeval timeout, *timeoutp; + char *engine_id = NULL; + ENGINE *e = NULL; #ifndef OPENSSL_NO_ENGINE - char *engine_id = NULL; char *ssl_client_engine_id = NULL; ENGINE *ssl_client_engine = NULL; #endif - ENGINE *e = NULL; #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5) struct timeval tv; # if defined(OPENSSL_SYS_BEOS_R5) @@ -1186,8 +1186,8 @@ next_proto.data = NULL; #endif + e = setup_engine(bio_err, engine_id, 1); #ifndef OPENSSL_NO_ENGINE - e = setup_engine(bio_err, engine_id, 1); if (ssl_client_engine_id) { ssl_client_engine = ENGINE_by_id(ssl_client_engine_id); if (!ssl_client_engine) { @@ -2123,6 +2123,7 @@ OPENSSL_cleanse(mbuf, BUFSIZZ); OPENSSL_free(mbuf); } + release_engine(e); if (bio_c_out != NULL) { BIO_free(bio_c_out); bio_c_out = NULL; --- crypto/openssl/apps/s_server.c.orig +++ crypto/openssl/apps/s_server.c @@ -328,9 +328,7 @@ static int keymatexportlen = 20; static int hack = 0; -#ifndef OPENSSL_NO_ENGINE static char *engine_id = NULL; -#endif static const char *session_id_prefix = NULL; static int enable_timeouts = 0; @@ -484,9 +482,7 @@ s_quiet = 0; s_brief = 0; hack = 0; -# ifndef OPENSSL_NO_ENGINE engine_id = NULL; -# endif } #endif @@ -1603,9 +1599,7 @@ SSL_load_error_strings(); OpenSSL_add_ssl_algorithms(); -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine_id, 1); -#endif if (!app_passwd(bio_err, passarg, dpassarg, &pass, &dpass)) { BIO_printf(bio_err, "Error getting password\n"); @@ -2129,6 +2123,7 @@ if (jpake_secret && psk_key) OPENSSL_free(psk_key); #endif + release_engine(e); if (bio_s_out != NULL) { BIO_free(bio_s_out); bio_s_out = NULL; --- crypto/openssl/apps/smime.c.orig +++ crypto/openssl/apps/smime.c @@ -114,9 +114,7 @@ const EVP_MD *sign_md = NULL; int informat = FORMAT_SMIME, outformat = FORMAT_SMIME; int keyform = FORMAT_PEM; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif X509_VERIFY_PARAM *vpm = NULL; @@ -461,9 +459,7 @@ "cert.pem recipient certificate(s) for encryption\n"); goto end; } -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif if (!app_passwd(bio_err, passargin, NULL, &passin, NULL)) { BIO_printf(bio_err, "Error getting password\n"); @@ -736,6 +732,7 @@ X509_free(signer); EVP_PKEY_free(key); PKCS7_free(p7); + release_engine(e); BIO_free(in); BIO_free(indata); BIO_free_all(out); --- crypto/openssl/apps/speed.c.orig +++ crypto/openssl/apps/speed.c @@ -372,6 +372,7 @@ int MAIN(int argc, char **argv) { + ENGINE *e = NULL; unsigned char *buf = NULL, *buf2 = NULL; int mret = 1; long count = 0, save_count = 0; @@ -669,6 +670,10 @@ ecdh_b[i] = NULL; } # endif +# ifndef OPENSSL_NO_RSA + for (i = 0; i < RSA_NUM; i++) + rsa_key[i] = NULL; +# endif if (bio_err == NULL) if ((bio_err = BIO_new(BIO_s_file())) != NULL) @@ -677,12 +682,6 @@ if (!load_config(bio_err, NULL)) goto end; -# ifndef OPENSSL_NO_RSA - memset(rsa_key, 0, sizeof(rsa_key)); - for (i = 0; i < RSA_NUM; i++) - rsa_key[i] = NULL; -# endif - if ((buf = (unsigned char *)OPENSSL_malloc((int)BUFSIZE)) == NULL) { BIO_printf(bio_err, "out of memory\n"); goto end; @@ -749,7 +748,7 @@ BIO_printf(bio_err, "no engine given\n"); goto end; } - setup_engine(bio_err, *argv, 0); + e = setup_engine(bio_err, *argv, 0); /* * j will be increased again further down. We just don't want * speed to confuse an engine with an algorithm, especially when @@ -2526,6 +2525,7 @@ } # endif + release_engine(e); apps_shutdown(); OPENSSL_EXIT(mret); } --- crypto/openssl/apps/spkac.c.orig +++ crypto/openssl/apps/spkac.c @@ -94,9 +94,7 @@ CONF *conf = NULL; NETSCAPE_SPKI *spki = NULL; EVP_PKEY *pkey = NULL; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif apps_startup(); @@ -185,9 +183,7 @@ BIO_printf(bio_err, "Error getting password\n"); goto end; } -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif if (keyfile) { pkey = load_key(bio_err, @@ -305,6 +301,7 @@ BIO_free(in); BIO_free_all(out); EVP_PKEY_free(pkey); + release_engine(e); if (passin) OPENSSL_free(passin); apps_shutdown(); --- crypto/openssl/apps/srp.c.orig +++ crypto/openssl/apps/srp.c @@ -293,9 +293,8 @@ int i; long errorline = -1; char *randfile = NULL; -# ifndef OPENSSL_NO_ENGINE + ENGINE *e = NULL; char *engine = NULL; -# endif char *tofree = NULL; DB_ATTR db_attr; @@ -411,9 +410,7 @@ ERR_load_crypto_strings(); -# ifndef OPENSSL_NO_ENGINE - setup_engine(bio_err, engine, 0); -# endif + e = setup_engine(bio_err, engine, 0); if (!app_passwd(bio_err, passargin, passargout, &passin, &passout)) { BIO_printf(bio_err, "Error getting passwords\n"); @@ -760,6 +757,7 @@ if (db) free_index(db); + release_engine(e); OBJ_cleanup(); apps_shutdown(); OPENSSL_EXIT(ret); --- crypto/openssl/apps/verify.c.orig +++ crypto/openssl/apps/verify.c @@ -89,9 +89,7 @@ X509_LOOKUP *lookup = NULL; X509_VERIFY_PARAM *vpm = NULL; int crl_download = 0; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif cert_ctx = X509_STORE_new(); if (cert_ctx == NULL) @@ -160,9 +158,7 @@ break; } -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif if (vpm) X509_STORE_set1_param(cert_ctx, vpm); @@ -255,6 +251,7 @@ sk_X509_pop_free(untrusted, X509_free); sk_X509_pop_free(trusted, X509_free); sk_X509_CRL_pop_free(crls, X509_CRL_free); + release_engine(e); apps_shutdown(); OPENSSL_EXIT(ret < 0 ? 2 : ret); } --- crypto/openssl/apps/x509.c.orig +++ crypto/openssl/apps/x509.c @@ -218,9 +218,7 @@ char *checkhost = NULL; char *checkemail = NULL; char *checkip = NULL; -#ifndef OPENSSL_NO_ENGINE char *engine = NULL; -#endif reqfile = 0; @@ -501,9 +499,7 @@ BIO_printf(bio_err, "%s", *pp); goto end; } -#ifndef OPENSSL_NO_ENGINE e = setup_engine(bio_err, engine, 0); -#endif if (need_rand) app_RAND_load_file(NULL, bio_err, 0); @@ -1040,6 +1036,7 @@ ASN1_INTEGER_free(sno); sk_ASN1_OBJECT_pop_free(trust, ASN1_OBJECT_free); sk_ASN1_OBJECT_pop_free(reject, ASN1_OBJECT_free); + release_engine(e); if (passin) OPENSSL_free(passin); apps_shutdown(); --- crypto/openssl/crypto/aes/asm/aes-s390x.pl.orig +++ crypto/openssl/crypto/aes/asm/aes-s390x.pl @@ -1568,8 +1568,8 @@ } ######################################################################## -# void AES_xts_encrypt(const char *inp,char *out,size_t len, -# const AES_KEY *key1, const AES_KEY *key2, +# void AES_xts_encrypt(const unsigned char *inp, unsigned char *out, +# size_t len, const AES_KEY *key1, const AES_KEY *key2, # const unsigned char iv[16]); # { @@ -1937,8 +1937,8 @@ br $ra .size AES_xts_encrypt,.-AES_xts_encrypt ___ -# void AES_xts_decrypt(const char *inp,char *out,size_t len, -# const AES_KEY *key1, const AES_KEY *key2, +# void AES_xts_decrypt(const unsigned char *inp, unsigned char *out, +# size_t len, const AES_KEY *key1, const AES_KEY *key2, # const unsigned char iv[16]); # $code.=<<___; --- crypto/openssl/crypto/asn1/p5_pbev2.c.orig +++ crypto/openssl/crypto/asn1/p5_pbev2.c @@ -91,12 +91,11 @@ unsigned char *salt, int saltlen, unsigned char *aiv, int prf_nid) { - X509_ALGOR *scheme = NULL, *kalg = NULL, *ret = NULL; + X509_ALGOR *scheme = NULL, *ret = NULL; int alg_nid, keylen; EVP_CIPHER_CTX ctx; unsigned char iv[EVP_MAX_IV_LENGTH]; PBE2PARAM *pbe2 = NULL; - ASN1_OBJECT *obj; alg_nid = EVP_CIPHER_type(cipher); if (alg_nid == NID_undef) { @@ -104,7 +103,6 @@ ASN1_R_CIPHER_HAS_NO_OBJECT_IDENTIFIER); goto err; } - obj = OBJ_nid2obj(alg_nid); if (!(pbe2 = PBE2PARAM_new())) goto merr; @@ -112,7 +110,7 @@ /* Setup the AlgorithmIdentifier for the encryption scheme */ scheme = pbe2->encryption; - scheme->algorithm = obj; + scheme->algorithm = OBJ_nid2obj(alg_nid); if (!(scheme->parameter = ASN1_TYPE_new())) goto merr; @@ -188,11 +186,9 @@ err: PBE2PARAM_free(pbe2); /* Note 'scheme' is freed as part of pbe2 */ - X509_ALGOR_free(kalg); X509_ALGOR_free(ret); return NULL; - } X509_ALGOR *PKCS5_pbe2_set(const EVP_CIPHER *cipher, int iter, --- crypto/openssl/crypto/asn1/x_crl.c.orig +++ crypto/openssl/crypto/asn1/x_crl.c @@ -254,6 +254,7 @@ for (idx = 0; idx < sk_X509_EXTENSION_num(exts); idx++) { int nid; + ext = sk_X509_EXTENSION_value(exts, idx); nid = OBJ_obj2nid(ext->object); if (nid == NID_freshest_crl) @@ -263,7 +264,7 @@ if ((nid == NID_issuing_distribution_point) || (nid == NID_authority_key_identifier) || (nid == NID_delta_crl)) - break;; + continue; crl->flags |= EXFLAG_CRITICAL; break; } --- crypto/openssl/crypto/bn/asm/x86_64-mont.pl.orig +++ crypto/openssl/crypto/bn/asm/x86_64-mont.pl @@ -1148,11 +1148,11 @@ mulx 2*8($aptr),%r15,%r13 # ... adox -3*8($tptr),%r11 adcx %r15,%r12 - adox $zero,%r12 + adox -2*8($tptr),%r12 adcx $zero,%r13 + adox $zero,%r13 mov $bptr,8(%rsp) # off-load &b[i] - .byte 0x67 mov $mi,%r15 imulq 24(%rsp),$mi # "t[0]"*n0 xor %ebp,%ebp # xor $zero,$zero # cf=0, of=0 @@ -1159,7 +1159,6 @@ mulx 3*8($aptr),%rax,%r14 mov $mi,%rdx - adox -2*8($tptr),%r12 adcx %rax,%r13 adox -1*8($tptr),%r13 adcx $zero,%r14 --- crypto/openssl/crypto/bn/asm/x86_64-mont5.pl.orig +++ crypto/openssl/crypto/bn/asm/x86_64-mont5.pl @@ -1925,6 +1925,7 @@ .align 32 .L8x_tail_done: + xor %rax,%rax add (%rdx),%r8 # can this overflow? adc \$0,%r9 adc \$0,%r10 @@ -1932,10 +1933,8 @@ adc \$0,%r12 adc \$0,%r13 adc \$0,%r14 - adc \$0,%r15 # can't overflow, because we - # started with "overhung" part - # of multiplication - xor %rax,%rax + adc \$0,%r15 + adc \$0,%rax neg $carry .L8x_no_tail: @@ -3375,6 +3374,7 @@ .align 32 .Lsqrx8x_tail_done: + xor %rax,%rax add 24+8(%rsp),%r8 # can this overflow? adc \$0,%r9 adc \$0,%r10 @@ -3382,10 +3382,8 @@ adc \$0,%r12 adc \$0,%r13 adc \$0,%r14 - adc \$0,%r15 # can't overflow, because we - # started with "overhung" part - # of multiplication - mov $carry,%rax # xor %rax,%rax + adc \$0,%r15 + adc \$0,%rax sub 16+8(%rsp),$carry # mov 16(%rsp),%cf .Lsqrx8x_no_tail: # %cf is 0 if jumped here @@ -3400,7 +3398,7 @@ adc 8*5($tptr),%r13 adc 8*6($tptr),%r14 adc 8*7($tptr),%r15 - adc %rax,%rax # top-most carry + adc \$0,%rax # top-most carry mov 32+8(%rsp),%rbx # n0 mov 8*8($tptr,%rcx),%rdx # modulo-scheduled "%r8" --- crypto/openssl/crypto/bn/bn_exp.c.orig +++ crypto/openssl/crypto/bn/bn_exp.c @@ -180,8 +180,9 @@ goto err; } } - if (r != rr) - BN_copy(r, rr); + if (r != rr && BN_copy(r, rr) == NULL) + goto err; + ret = 1; err: BN_CTX_end(ctx); --- crypto/openssl/crypto/bn/bn_mul.c.orig +++ crypto/openssl/crypto/bn/bn_mul.c @@ -1083,8 +1083,9 @@ end: #endif bn_correct_top(rr); - if (r != rr) - BN_copy(r, rr); + if (r != rr && BN_copy(r, rr) == NULL) + goto err; + ret = 1; err: bn_check_top(r); --- crypto/openssl/crypto/bn/bn_prime.c.orig +++ crypto/openssl/crypto/bn/bn_prime.c @@ -283,7 +283,8 @@ BIGNUM *t; if ((t = BN_CTX_get(ctx)) == NULL) goto err; - BN_copy(t, a); + if (BN_copy(t, a) == NULL) + goto err; t->neg = 0; A = t; } else --- crypto/openssl/crypto/bn/bn_sqr.c.orig +++ crypto/openssl/crypto/bn/bn_sqr.c @@ -143,8 +143,9 @@ rr->top = max - 1; else rr->top = max; - if (rr != r) - BN_copy(r, rr); + if (r != rr && BN_copy(r, rr) == NULL) + goto err; + ret = 1; err: bn_check_top(rr); --- crypto/openssl/crypto/cms/cms_kari.c.orig +++ crypto/openssl/crypto/cms/cms_kari.c @@ -401,9 +401,12 @@ * Pick a cipher based on content encryption cipher. If it is DES3 use * DES3 wrap otherwise use AES wrap similar to key size. */ +#ifndef OPENSSL_NO_DES if (EVP_CIPHER_type(cipher) == NID_des_ede3_cbc) kekcipher = EVP_des_ede3_wrap(); - else if (keylen <= 16) + else +#endif + if (keylen <= 16) kekcipher = EVP_aes_128_wrap(); else if (keylen <= 24) kekcipher = EVP_aes_192_wrap(); --- crypto/openssl/crypto/dh/dh_key.c.orig +++ crypto/openssl/crypto/dh/dh_key.c @@ -223,6 +223,8 @@ goto err; BN_CTX_start(ctx); tmp = BN_CTX_get(ctx); + if (tmp == NULL) + goto err; if (dh->priv_key == NULL) { DHerr(DH_F_COMPUTE_KEY, DH_R_NO_PRIVATE_VALUE); --- crypto/openssl/crypto/dsa/dsa_pmeth.c.orig +++ crypto/openssl/crypto/dsa/dsa_pmeth.c @@ -180,7 +180,7 @@ DSAerr(DSA_F_PKEY_DSA_CTRL, DSA_R_INVALID_DIGEST_TYPE); return 0; } - dctx->md = p2; + dctx->pmd = p2; return 1; case EVP_PKEY_CTRL_MD: --- crypto/openssl/crypto/ec/ec2_mult.c.orig +++ crypto/openssl/crypto/ec/ec2_mult.c @@ -267,7 +267,7 @@ BN_CTX *ctx) { BIGNUM *x1, *x2, *z1, *z2; - int ret = 0, i; + int ret = 0, i, group_top; BN_ULONG mask, word; if (r == point) { @@ -297,10 +297,12 @@ x2 = &r->X; z2 = &r->Y; - bn_wexpand(x1, group->field.top); - bn_wexpand(z1, group->field.top); - bn_wexpand(x2, group->field.top); - bn_wexpand(z2, group->field.top); + group_top = group->field.top; + if (bn_wexpand(x1, group_top) == NULL + || bn_wexpand(z1, group_top) == NULL + || bn_wexpand(x2, group_top) == NULL + || bn_wexpand(z2, group_top) == NULL) + goto err; if (!BN_GF2m_mod_arr(x1, &point->X, group->poly)) goto err; /* x1 = x */ @@ -329,14 +331,14 @@ for (; i >= 0; i--) { word = scalar->d[i]; while (mask) { - BN_consttime_swap(word & mask, x1, x2, group->field.top); - BN_consttime_swap(word & mask, z1, z2, group->field.top); + BN_consttime_swap(word & mask, x1, x2, group_top); + BN_consttime_swap(word & mask, z1, z2, group_top); if (!gf2m_Madd(group, &point->X, x2, z2, x1, z1, ctx)) goto err; if (!gf2m_Mdouble(group, x1, z1, ctx)) goto err; - BN_consttime_swap(word & mask, x1, x2, group->field.top); - BN_consttime_swap(word & mask, z1, z2, group->field.top); + BN_consttime_swap(word & mask, x1, x2, group_top); + BN_consttime_swap(word & mask, z1, z2, group_top); mask >>= 1; } mask = BN_TBIT; --- crypto/openssl/crypto/ecdh/ech_ossl.c.orig +++ crypto/openssl/crypto/ecdh/ech_ossl.c @@ -212,7 +212,9 @@ BN_CTX_end(ctx); if (ctx) BN_CTX_free(ctx); - if (buf) + if (buf) { + OPENSSL_cleanse(buf, buflen); OPENSSL_free(buf); + } return (ret); } --- crypto/openssl/crypto/err/err.c.orig +++ crypto/openssl/crypto/err/err.c @@ -868,6 +868,9 @@ const char *ls, *fs, *rs; unsigned long l, f, r; + if (len == 0) + return; + l = ERR_GET_LIB(e); f = ERR_GET_FUNC(e); r = ERR_GET_REASON(e); --- crypto/openssl/crypto/evp/e_aes.c.orig +++ crypto/openssl/crypto/evp/e_aes.c @@ -155,10 +155,10 @@ const unsigned char ivec[AES_BLOCK_SIZE]); # endif # ifdef AES_XTS_ASM -void AES_xts_encrypt(const char *inp, char *out, size_t len, +void AES_xts_encrypt(const unsigned char *inp, unsigned char *out, size_t len, const AES_KEY *key1, const AES_KEY *key2, const unsigned char iv[16]); -void AES_xts_decrypt(const char *inp, char *out, size_t len, +void AES_xts_decrypt(const unsigned char *inp, unsigned char *out, size_t len, const AES_KEY *key1, const AES_KEY *key2, const unsigned char iv[16]); # endif --- crypto/openssl/crypto/evp/e_rc4_hmac_md5.c.orig +++ crypto/openssl/crypto/evp/e_rc4_hmac_md5.c @@ -269,6 +269,8 @@ len = p[arg - 2] << 8 | p[arg - 1]; if (!ctx->encrypt) { + if (len < MD5_DIGEST_LENGTH) + return -1; len -= MD5_DIGEST_LENGTH; p[arg - 2] = len >> 8; p[arg - 1] = len; --- crypto/openssl/crypto/evp/evp.h.orig +++ crypto/openssl/crypto/evp/evp.h @@ -1370,6 +1370,7 @@ * The following lines are auto generated by the script mkerr.pl. Any changes * made after this point may be overwritten when the script is next run. */ + void ERR_load_EVP_strings(void); /* Error codes for the EVP functions. */ @@ -1489,6 +1490,7 @@ # define EVP_R_INPUT_NOT_INITIALIZED 111 # define EVP_R_INVALID_DIGEST 152 # define EVP_R_INVALID_FIPS_MODE 168 +# define EVP_R_INVALID_KEY 171 # define EVP_R_INVALID_KEY_LENGTH 130 # define EVP_R_INVALID_OPERATION 148 # define EVP_R_IV_TOO_LARGE 102 @@ -1528,7 +1530,7 @@ # define EVP_R_WRONG_FINAL_BLOCK_LENGTH 109 # define EVP_R_WRONG_PUBLIC_KEY_TYPE 110 -#ifdef __cplusplus +# ifdef __cplusplus } +# endif #endif -#endif --- crypto/openssl/crypto/evp/evp_err.c.orig +++ crypto/openssl/crypto/evp/evp_err.c @@ -1,6 +1,6 @@ /* crypto/evp/evp_err.c */ /* ==================================================================== - * Copyright (c) 1999-2013 The OpenSSL Project. All rights reserved. + * Copyright (c) 1999-2016 The OpenSSL Project. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -192,6 +192,7 @@ {ERR_REASON(EVP_R_INPUT_NOT_INITIALIZED), "input not initialized"}, {ERR_REASON(EVP_R_INVALID_DIGEST), "invalid digest"}, {ERR_REASON(EVP_R_INVALID_FIPS_MODE), "invalid fips mode"}, + {ERR_REASON(EVP_R_INVALID_KEY), "invalid key"}, {ERR_REASON(EVP_R_INVALID_KEY_LENGTH), "invalid key length"}, {ERR_REASON(EVP_R_INVALID_OPERATION), "invalid operation"}, {ERR_REASON(EVP_R_IV_TOO_LARGE), "iv too large"}, --- crypto/openssl/crypto/evp/pmeth_fn.c.orig +++ crypto/openssl/crypto/evp/pmeth_fn.c @@ -65,20 +65,22 @@ #include "evp_locl.h" #define M_check_autoarg(ctx, arg, arglen, err) \ - if (ctx->pmeth->flags & EVP_PKEY_FLAG_AUTOARGLEN) \ - { \ - size_t pksize = (size_t)EVP_PKEY_size(ctx->pkey); \ - if (!arg) \ - { \ - *arglen = pksize; \ - return 1; \ - } \ - else if (*arglen < pksize) \ - { \ - EVPerr(err, EVP_R_BUFFER_TOO_SMALL); /*ckerr_ignore*/\ - return 0; \ - } \ - } + if (ctx->pmeth->flags & EVP_PKEY_FLAG_AUTOARGLEN) { \ + size_t pksize = (size_t)EVP_PKEY_size(ctx->pkey); \ + \ + if (pksize == 0) { \ + EVPerr(err, EVP_R_INVALID_KEY); /*ckerr_ignore*/ \ + return 0; \ + } \ + if (!arg) { \ + *arglen = pksize; \ + return 1; \ + } \ + if (*arglen < pksize) { \ + EVPerr(err, EVP_R_BUFFER_TOO_SMALL); /*ckerr_ignore*/ \ + return 0; \ + } \ + } int EVP_PKEY_sign_init(EVP_PKEY_CTX *ctx) { --- crypto/openssl/crypto/evp/pmeth_lib.c.orig +++ crypto/openssl/crypto/evp/pmeth_lib.c @@ -199,6 +199,7 @@ EVP_PKEY_METHOD *EVP_PKEY_meth_new(int id, int flags) { EVP_PKEY_METHOD *pmeth; + pmeth = OPENSSL_malloc(sizeof(EVP_PKEY_METHOD)); if (!pmeth) return NULL; @@ -207,33 +208,6 @@ pmeth->pkey_id = id; pmeth->flags = flags | EVP_PKEY_FLAG_DYNAMIC; - - pmeth->init = 0; - pmeth->copy = 0; - pmeth->cleanup = 0; - pmeth->paramgen_init = 0; - pmeth->paramgen = 0; - pmeth->keygen_init = 0; - pmeth->keygen = 0; - pmeth->sign_init = 0; - pmeth->sign = 0; - pmeth->verify_init = 0; - pmeth->verify = 0; - pmeth->verify_recover_init = 0; - pmeth->verify_recover = 0; - pmeth->signctx_init = 0; - pmeth->signctx = 0; - pmeth->verifyctx_init = 0; - pmeth->verifyctx = 0; - pmeth->encrypt_init = 0; - pmeth->encrypt = 0; - pmeth->decrypt_init = 0; - pmeth->decrypt = 0; - pmeth->derive_init = 0; - pmeth->derive = 0; - pmeth->ctrl = 0; - pmeth->ctrl_str = 0; - return pmeth; } --- crypto/openssl/crypto/modes/ctr128.c.orig +++ crypto/openssl/crypto/modes/ctr128.c @@ -100,7 +100,7 @@ --n; d = data[n] += c; /* did addition carry? */ - c = ((d - c) ^ d) >> (sizeof(size_t) * 8 - 1); + c = ((d - c) & ~d) >> (sizeof(size_t) * 8 - 1); } while (n); } #endif --- crypto/openssl/crypto/opensslv.h.orig +++ crypto/openssl/crypto/opensslv.h @@ -30,11 +30,11 @@ * (Prior to 0.9.5a beta1, a different scheme was used: MMNNFFRBB for * major minor fix final patch/beta) */ -# define OPENSSL_VERSION_NUMBER 0x100020afL +# define OPENSSL_VERSION_NUMBER 0x100020bfL # ifdef OPENSSL_FIPS -# define OPENSSL_VERSION_TEXT "OpenSSL 1.0.2j-fips 26 Sep 2016" +# define OPENSSL_VERSION_TEXT "OpenSSL 1.0.2k-fips 26 Jan 2017" # else -# define OPENSSL_VERSION_TEXT "OpenSSL 1.0.2j-freebsd 26 Sep 2016" +# define OPENSSL_VERSION_TEXT "OpenSSL 1.0.2k-freebsd 26 Jan 2017" # endif # define OPENSSL_VERSION_PTEXT " part of " OPENSSL_VERSION_TEXT --- crypto/openssl/crypto/perlasm/x86_64-xlate.pl.orig +++ crypto/openssl/crypto/perlasm/x86_64-xlate.pl @@ -250,12 +250,19 @@ $self->{base} =~ s/^[er](.?[0-9xpi])[d]?$/r\1/; # Solaris /usr/ccs/bin/as can't handle multiplications - # in $self->{label}, new gas requires sign extension... + # in $self->{label}... use integer; $self->{label} =~ s/(?{label} =~ s/\b([0-9]+\s*[\*\/\%]\s*[0-9]+)\b/eval($1)/eg; - $self->{label} =~ s/\b([0-9]+)\b/$1<<32>>32/eg; + # Some assemblers insist on signed presentation of 32-bit + # offsets, but sign extension is a tricky business in perl... + if ((1<<31)<<1) { + $self->{label} =~ s/\b([0-9]+)\b/$1<<32>>32/eg; + } else { + $self->{label} =~ s/\b([0-9]+)\b/$1>>0/eg; + } + if (!$self->{label} && $self->{index} && $self->{scale}==1 && $self->{base} =~ /(rbp|r13)/) { $self->{base} = $self->{index}; $self->{index} = $1; --- crypto/openssl/crypto/rsa/rsa_gen.c.orig +++ crypto/openssl/crypto/rsa/rsa_gen.c @@ -142,7 +142,8 @@ if (!rsa->iqmp && ((rsa->iqmp = BN_new()) == NULL)) goto err; - BN_copy(rsa->e, e_value); + if (BN_copy(rsa->e, e_value) == NULL) + goto err; /* generate p and q */ for (;;) { --- crypto/openssl/crypto/rsa/rsa_oaep.c.orig +++ crypto/openssl/crypto/rsa/rsa_oaep.c @@ -89,17 +89,21 @@ } if (PKCS1_MGF1(dbmask, emlen - mdlen, seed, mdlen, mgf1md) < 0) - return 0; + goto err; for (i = 0; i < emlen - mdlen; i++) db[i] ^= dbmask[i]; if (PKCS1_MGF1(seedmask, mdlen, db, emlen - mdlen, mgf1md) < 0) - return 0; + goto err; for (i = 0; i < mdlen; i++) seed[i] ^= seedmask[i]; OPENSSL_free(dbmask); return 1; + + err: + OPENSSL_free(dbmask); + return 0; } int RSA_padding_check_PKCS1_OAEP(unsigned char *to, int tlen, --- crypto/openssl/crypto/rsa/rsa_pmeth.c.orig +++ crypto/openssl/crypto/rsa/rsa_pmeth.c @@ -373,6 +373,10 @@ if (rctx->pad_mode == RSA_PKCS1_PADDING) return RSA_verify(EVP_MD_type(rctx->md), tbs, tbslen, sig, siglen, rsa); + if (tbslen != (size_t)EVP_MD_size(rctx->md)) { + RSAerr(RSA_F_PKEY_RSA_VERIFY, RSA_R_INVALID_DIGEST_LENGTH); + return -1; + } if (rctx->pad_mode == RSA_X931_PADDING) { if (pkey_rsa_verifyrecover(ctx, NULL, &rslen, sig, siglen) <= 0) return 0; --- crypto/openssl/crypto/s390xcap.c.orig +++ crypto/openssl/crypto/s390xcap.c @@ -3,6 +3,7 @@ #include #include #include +#include "cryptlib.h" extern unsigned long OPENSSL_s390xcap_P[]; --- crypto/openssl/crypto/ui/ui_lib.c.orig +++ crypto/openssl/crypto/ui/ui_lib.c @@ -164,7 +164,7 @@ UI_STRING *s = general_allocate_prompt(ui, prompt, prompt_freeable, type, input_flags, result_buf); - if (s) { + if (s != NULL) { if (allocate_string_stack(ui) >= 0) { s->_.string_data.result_minsize = minsize; s->_.string_data.result_maxsize = maxsize; @@ -197,8 +197,8 @@ } else if (cancel_chars == NULL) { UIerr(UI_F_GENERAL_ALLOCATE_BOOLEAN, ERR_R_PASSED_NULL_PARAMETER); } else { - for (p = ok_chars; *p; p++) { - if (strchr(cancel_chars, *p)) { + for (p = ok_chars; *p != '\0'; p++) { + if (strchr(cancel_chars, *p) != NULL) { UIerr(UI_F_GENERAL_ALLOCATE_BOOLEAN, UI_R_COMMON_OK_AND_CANCEL_CHARACTERS); } @@ -207,7 +207,7 @@ s = general_allocate_prompt(ui, prompt, prompt_freeable, type, input_flags, result_buf); - if (s) { + if (s != NULL) { if (allocate_string_stack(ui) >= 0) { s->_.boolean_data.action_desc = action_desc; s->_.boolean_data.ok_chars = ok_chars; @@ -243,7 +243,7 @@ { char *prompt_copy = NULL; - if (prompt) { + if (prompt != NULL) { prompt_copy = BUF_strdup(prompt); if (prompt_copy == NULL) { UIerr(UI_F_UI_DUP_INPUT_STRING, ERR_R_MALLOC_FAILURE); @@ -271,7 +271,7 @@ { char *prompt_copy = NULL; - if (prompt) { + if (prompt != NULL) { prompt_copy = BUF_strdup(prompt); if (prompt_copy == NULL) { UIerr(UI_F_UI_DUP_VERIFY_STRING, ERR_R_MALLOC_FAILURE); @@ -302,7 +302,7 @@ char *ok_chars_copy = NULL; char *cancel_chars_copy = NULL; - if (prompt) { + if (prompt != NULL) { prompt_copy = BUF_strdup(prompt); if (prompt_copy == NULL) { UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE); @@ -310,7 +310,7 @@ } } - if (action_desc) { + if (action_desc != NULL) { action_desc_copy = BUF_strdup(action_desc); if (action_desc_copy == NULL) { UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE); @@ -318,7 +318,7 @@ } } - if (ok_chars) { + if (ok_chars != NULL) { ok_chars_copy = BUF_strdup(ok_chars); if (ok_chars_copy == NULL) { UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE); @@ -326,7 +326,7 @@ } } - if (cancel_chars) { + if (cancel_chars != NULL) { cancel_chars_copy = BUF_strdup(cancel_chars); if (cancel_chars_copy == NULL) { UIerr(UI_F_UI_DUP_INPUT_BOOLEAN, ERR_R_MALLOC_FAILURE); @@ -359,7 +359,7 @@ { char *text_copy = NULL; - if (text) { + if (text != NULL) { text_copy = BUF_strdup(text); if (text_copy == NULL) { UIerr(UI_F_UI_DUP_INFO_STRING, ERR_R_MALLOC_FAILURE); @@ -381,7 +381,7 @@ { char *text_copy = NULL; - if (text) { + if (text != NULL) { text_copy = BUF_strdup(text); if (text_copy == NULL) { UIerr(UI_F_UI_DUP_ERROR_STRING, ERR_R_MALLOC_FAILURE); @@ -397,7 +397,7 @@ { char *prompt = NULL; - if (ui->meth->ui_construct_prompt) + if (ui->meth->ui_construct_prompt != NULL) prompt = ui->meth->ui_construct_prompt(ui, object_desc, object_name); else { char prompt1[] = "Enter "; @@ -408,7 +408,7 @@ if (object_desc == NULL) return NULL; len = sizeof(prompt1) - 1 + strlen(object_desc); - if (object_name) + if (object_name != NULL) len += sizeof(prompt2) - 1 + strlen(object_name); len += sizeof(prompt3) - 1; @@ -417,7 +417,7 @@ return NULL; BUF_strlcpy(prompt, prompt1, len + 1); BUF_strlcat(prompt, object_desc, len + 1); - if (object_name) { + if (object_name != NULL) { BUF_strlcat(prompt, prompt2, len + 1); BUF_strlcat(prompt, object_name, len + 1); } @@ -459,7 +459,8 @@ uis.type = UIT_ERROR; uis.out_string = str; - if (ui->meth->ui_write_string && !ui->meth->ui_write_string(ui, &uis)) + if (ui->meth->ui_write_string != NULL + && ui->meth->ui_write_string(ui, &uis) <= 0) return -1; return 0; } @@ -468,8 +469,11 @@ { int i, ok = 0; - if (ui->meth->ui_open_session && !ui->meth->ui_open_session(ui)) - return -1; + if (ui->meth->ui_open_session != NULL + && ui->meth->ui_open_session(ui) <= 0) { + ok = -1; + goto err; + } if (ui->flags & UI_FLAG_PRINT_ERRORS) ERR_print_errors_cb((int (*)(const char *, size_t, void *)) @@ -476,9 +480,10 @@ print_error, (void *)ui); for (i = 0; i < sk_UI_STRING_num(ui->strings); i++) { - if (ui->meth->ui_write_string - && !ui->meth->ui_write_string(ui, - sk_UI_STRING_value(ui->strings, i))) + if (ui->meth->ui_write_string != NULL + && (ui->meth->ui_write_string(ui, + sk_UI_STRING_value(ui->strings, i)) + <= 0)) { ok = -1; goto err; @@ -485,7 +490,7 @@ } } - if (ui->meth->ui_flush) + if (ui->meth->ui_flush != NULL) switch (ui->meth->ui_flush(ui)) { case -1: /* Interrupt/Cancel/something... */ ok = -2; @@ -499,7 +504,7 @@ } for (i = 0; i < sk_UI_STRING_num(ui->strings); i++) { - if (ui->meth->ui_read_string) { + if (ui->meth->ui_read_string != NULL) { switch (ui->meth->ui_read_string(ui, sk_UI_STRING_value(ui->strings, i))) { @@ -516,7 +521,8 @@ } } err: - if (ui->meth->ui_close_session && !ui->meth->ui_close_session(ui)) + if (ui->meth->ui_close_session != NULL + && ui->meth->ui_close_session(ui) <= 0) return -1; return ok; } @@ -612,49 +618,49 @@ int UI_method_set_opener(UI_METHOD *method, int (*opener) (UI *ui)) { - if (method) { + if (method != NULL) { method->ui_open_session = opener; return 0; - } else - return -1; + } + return -1; } int UI_method_set_writer(UI_METHOD *method, int (*writer) (UI *ui, UI_STRING *uis)) { - if (method) { + if (method != NULL) { method->ui_write_string = writer; return 0; - } else - return -1; + } + return -1; } int UI_method_set_flusher(UI_METHOD *method, int (*flusher) (UI *ui)) { - if (method) { + if (method != NULL) { method->ui_flush = flusher; return 0; - } else - return -1; + } + return -1; } int UI_method_set_reader(UI_METHOD *method, int (*reader) (UI *ui, UI_STRING *uis)) { - if (method) { + if (method != NULL) { method->ui_read_string = reader; return 0; - } else - return -1; + } + return -1; } int UI_method_set_closer(UI_METHOD *method, int (*closer) (UI *ui)) { - if (method) { + if (method != NULL) { method->ui_close_session = closer; return 0; - } else - return -1; + } + return -1; } int UI_method_set_prompt_constructor(UI_METHOD *method, @@ -664,55 +670,55 @@ const char *object_name)) { - if (method) { + if (method != NULL) { method->ui_construct_prompt = prompt_constructor; return 0; - } else - return -1; + } + return -1; } -int (*UI_method_get_opener(UI_METHOD *method)) (UI *) { - if (method) +int (*UI_method_get_opener(UI_METHOD *method)) (UI *) +{ + if (method != NULL) return method->ui_open_session; - else - return NULL; + return NULL; } -int (*UI_method_get_writer(UI_METHOD *method)) (UI *, UI_STRING *) { - if (method) +int (*UI_method_get_writer(UI_METHOD *method)) (UI *, UI_STRING *) +{ + if (method != NULL) return method->ui_write_string; - else - return NULL; + return NULL; } -int (*UI_method_get_flusher(UI_METHOD *method)) (UI *) { - if (method) +int (*UI_method_get_flusher(UI_METHOD *method)) (UI *) +{ + if (method != NULL) return method->ui_flush; - else - return NULL; + return NULL; } -int (*UI_method_get_reader(UI_METHOD *method)) (UI *, UI_STRING *) { - if (method) +int (*UI_method_get_reader(UI_METHOD *method)) (UI *, UI_STRING *) +{ + if (method != NULL) return method->ui_read_string; - else - return NULL; + return NULL; } -int (*UI_method_get_closer(UI_METHOD *method)) (UI *) { - if (method) +int (*UI_method_get_closer(UI_METHOD *method)) (UI *) +{ + if (method != NULL) return method->ui_close_session; - else - return NULL; + return NULL; } char *(*UI_method_get_prompt_constructor(UI_METHOD *method)) (UI *, const char *, - const char *) { - if (method) + const char *) +{ + if (method != NULL) return method->ui_construct_prompt; - else - return NULL; + return NULL; } enum UI_string_types UI_get_string_type(UI_STRING *uis) --- crypto/openssl/crypto/ui/ui_openssl.c.orig +++ crypto/openssl/crypto/ui/ui_openssl.c @@ -440,7 +440,7 @@ # else p = fgets(result, maxsize, tty_in); # endif - if (!p) + if (p == NULL) goto error; if (feof(tty_in)) goto error; @@ -509,18 +509,31 @@ is_a_tty = 0; else # endif +# ifdef ENODEV + /* + * MacOS X returns ENODEV (Operation not supported by device), + * which seems appropriate. + */ + if (errno == ENODEV) + is_a_tty = 0; + else +# endif return 0; } #endif #ifdef OPENSSL_SYS_VMS status = sys$assign(&terminal, &channel, 0, 0); + + /* if there isn't a TT device, something is very wrong */ if (status != SS$_NORMAL) return 0; - status = - sys$qiow(0, channel, IO$_SENSEMODE, &iosb, 0, 0, tty_orig, 12, 0, 0, - 0, 0); + + status = sys$qiow(0, channel, IO$_SENSEMODE, &iosb, 0, 0, tty_orig, 12, + 0, 0, 0, 0); + + /* If IO$_SENSEMODE doesn't work, this is not a terminal device */ if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL)) - return 0; + is_a_tty = 0; #endif return 1; } @@ -537,14 +550,15 @@ return 0; #endif #ifdef OPENSSL_SYS_VMS - tty_new[0] = tty_orig[0]; - tty_new[1] = tty_orig[1] | TT$M_NOECHO; - tty_new[2] = tty_orig[2]; - status = - sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12, 0, 0, 0, - 0); - if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL)) - return 0; + if (is_a_tty) { + tty_new[0] = tty_orig[0]; + tty_new[1] = tty_orig[1] | TT$M_NOECHO; + tty_new[2] = tty_orig[2]; + status = sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12, + 0, 0, 0, 0); + if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL)) + return 0; + } #endif return 1; } @@ -561,14 +575,15 @@ return 0; #endif #ifdef OPENSSL_SYS_VMS - tty_new[0] = tty_orig[0]; - tty_new[1] = tty_orig[1] & ~TT$M_NOECHO; - tty_new[2] = tty_orig[2]; - status = - sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12, 0, 0, 0, - 0); - if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL)) - return 0; + if (is_a_tty) { + tty_new[0] = tty_orig[0]; + tty_new[1] = tty_orig[1] & ~TT$M_NOECHO; + tty_new[2] = tty_orig[2]; + status = sys$qiow(0, channel, IO$_SETMODE, &iosb, 0, 0, tty_new, 12, + 0, 0, 0, 0); + if ((status != SS$_NORMAL) || (iosb.iosb$w_value != SS$_NORMAL)) + return 0; + } #endif return 1; } @@ -581,6 +596,8 @@ fclose(tty_out); #ifdef OPENSSL_SYS_VMS status = sys$dassgn(channel); + if (status != SS$_NORMAL) + return 0; #endif CRYPTO_w_unlock(CRYPTO_LOCK_UI); --- crypto/openssl/doc/apps/ocsp.pod.orig +++ crypto/openssl/doc/apps/ocsp.pod @@ -26,6 +26,7 @@ [B<-no_nonce>] [B<-url URL>] [B<-host host:n>] +[B<-header name value>] [B<-path>] [B<-CApath dir>] [B<-CAfile file>] @@ -135,6 +136,14 @@ B on port B. B specifies the HTTP path name to use or "/" by default. +=item B<-header name value> + +If sending a request to an OCSP server, then the specified header name and +value are added to the HTTP request. Note that the B and B must +be specified as two separate parameters, not as a single quoted string, and +that the header name does not have the trailing colon. +Some OCSP responders require a Host header; use this flag to provide it. + =item B<-timeout seconds> connection timeout to the OCSP responder in seconds --- crypto/openssl/doc/crypto/EVP_DigestSignInit.pod.orig +++ crypto/openssl/doc/crypto/EVP_DigestSignInit.pod @@ -10,7 +10,7 @@ int EVP_DigestSignInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx, const EVP_MD *type, ENGINE *e, EVP_PKEY *pkey); - int EVP_DigestSignUpdate(EVP_MD_CTX *ctx, const void *d, unsigned int cnt); + int EVP_DigestSignUpdate(EVP_MD_CTX *ctx, const void *d, size_t cnt); int EVP_DigestSignFinal(EVP_MD_CTX *ctx, unsigned char *sig, size_t *siglen); =head1 DESCRIPTION --- crypto/openssl/doc/crypto/EVP_DigestVerifyInit.pod.orig +++ crypto/openssl/doc/crypto/EVP_DigestVerifyInit.pod @@ -10,7 +10,7 @@ int EVP_DigestVerifyInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx, const EVP_MD *type, ENGINE *e, EVP_PKEY *pkey); - int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *d, unsigned int cnt); + int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *d, size_t cnt); int EVP_DigestVerifyFinal(EVP_MD_CTX *ctx, const unsigned char *sig, size_t siglen); =head1 DESCRIPTION --- crypto/openssl/doc/crypto/RSA_generate_key.pod.orig +++ crypto/openssl/doc/crypto/RSA_generate_key.pod @@ -52,7 +52,7 @@ The process is then repeated for prime q with B. RSA_generate_key is deprecated (new applications should use -RSA_generate_key_ex instead). RSA_generate_key works in the same was as +RSA_generate_key_ex instead). RSA_generate_key works in the same way as RSA_generate_key_ex except it uses "old style" call backs. See L for further details. --- crypto/openssl/doc/crypto/X509_NAME_get_index_by_NID.pod.orig +++ crypto/openssl/doc/crypto/X509_NAME_get_index_by_NID.pod @@ -83,10 +83,9 @@ Process all commonName entries: - int loc; + int lastpos = -1; X509_NAME_ENTRY *e; - loc = -1; for (;;) { lastpos = X509_NAME_get_index_by_NID(nm, NID_commonName, lastpos); --- crypto/openssl/doc/crypto/X509_NAME_print_ex.pod.orig +++ crypto/openssl/doc/crypto/X509_NAME_print_ex.pod @@ -23,9 +23,11 @@ X509_NAME_print_ex_fp() is identical to X509_NAME_print_ex() except the output is written to FILE pointer B. -X509_NAME_oneline() prints an ASCII version of B to B. At most B -bytes will be written. If B is B then a buffer is dynamically allocated -and returned, otherwise B is returned. +X509_NAME_oneline() prints an ASCII version of B to B. +If B is B then a buffer is dynamically allocated and returned, and +B is ignored. +Otherwise, at most B bytes will be written, including the ending '\0', +and B is returned. X509_NAME_print() prints out B to B indenting each line by B characters. Multiple lines are used if the output (including indent) exceeds --- crypto/openssl/doc/ssl/SSL_CTX_set_session_cache_mode.pod.orig +++ crypto/openssl/doc/ssl/SSL_CTX_set_session_cache_mode.pod @@ -30,7 +30,7 @@ agrees to reuse the session or it starts a full handshake (to create a new session). -A server will lookup up the session in its internal session storage. If the +A server will look up the session in its internal session storage. If the session is not found in internal storage or lookups for the internal storage have been deactivated (SSL_SESS_CACHE_NO_INTERNAL_LOOKUP), the server will try the external storage if available. --- crypto/openssl/doc/ssl/SSL_get_error.pod.orig +++ crypto/openssl/doc/ssl/SSL_get_error.pod @@ -38,13 +38,14 @@ =item SSL_ERROR_ZERO_RETURN -The TLS/SSL connection has been closed. If the protocol version is SSL 3.0 -or TLS 1.0, this result code is returned only if a closure -alert has occurred in the protocol, i.e. if the connection has been -closed cleanly. Note that in this case B -does not necessarily indicate that the underlying transport -has been closed. +The TLS/SSL connection has been closed. +If the protocol version is SSL 3.0 or higher, this result code is returned only +if a closure alert has occurred in the protocol, i.e. if the connection has been +closed cleanly. +Note that in this case B does not necessarily +indicate that the underlying transport has been closed. + =item SSL_ERROR_WANT_READ, SSL_ERROR_WANT_WRITE The operation did not complete; the same TLS/SSL I/O function should be @@ -89,12 +90,9 @@ =item SSL_ERROR_SYSCALL -Some I/O error occurred. The OpenSSL error queue may contain more -information on the error. If the error queue is empty -(i.e. ERR_get_error() returns 0), B can be used to find out more -about the error: If B, an EOF was observed that violates -the protocol. If B, the underlying B reported an -I/O error (for socket I/O on Unix systems, consult B for details). +Some non-recoverable I/O error occurred. +The OpenSSL error queue may contain more information on the error. +For socket I/O on Unix systems, consult B for details. =item SSL_ERROR_SSL --- crypto/openssl/doc/ssl/SSL_read.pod.orig +++ crypto/openssl/doc/ssl/SSL_read.pod @@ -81,34 +81,30 @@ =over 4 -=item E0 +=item E 0 -The read operation was successful; the return value is the number of -bytes actually read from the TLS/SSL connection. +The read operation was successful. +The return value is the number of bytes actually read from the TLS/SSL +connection. -=item Z<>0 +=item Z<><= 0 -The read operation was not successful. The reason may either be a clean -shutdown due to a "close notify" alert sent by the peer (in which case -the SSL_RECEIVED_SHUTDOWN flag in the ssl shutdown state is set -(see L, -L). It is also possible, that -the peer simply shut down the underlying transport and the shutdown is -incomplete. Call SSL_get_error() with the return value B to find out, -whether an error occurred or the connection was shut down cleanly -(SSL_ERROR_ZERO_RETURN). +=item E0 + +The read operation was not successful, because either the connection was closed, +an error occurred or action must be taken by the calling process. +Call L with the return value B to find out the reason. + SSLv2 (deprecated) does not support a shutdown alert protocol, so it can only be detected, whether the underlying connection was closed. It cannot be checked, whether the closure was initiated by the peer or by something else. -=item E0 +Old documentation indicated a difference between 0 and -1, and that -1 was +retryable. +You should instead call SSL_get_error() to find out if it's retryable. -The read operation was not successful, because either an error occurred -or action must be taken by the calling process. Call SSL_get_error() with the -return value B to find out the reason. - =back =head1 SEE ALSO --- crypto/openssl/doc/ssl/SSL_write.pod.orig +++ crypto/openssl/doc/ssl/SSL_write.pod @@ -74,28 +74,25 @@ =over 4 -=item E0 +=item E 0 The write operation was successful, the return value is the number of bytes actually written to the TLS/SSL connection. -=item Z<>0 +=item Z<><= 0 -The write operation was not successful. Probably the underlying connection -was closed. Call SSL_get_error() with the return value B to find out, -whether an error occurred or the connection was shut down cleanly -(SSL_ERROR_ZERO_RETURN). +The write operation was not successful, because either the connection was +closed, an error occurred or action must be taken by the calling process. +Call SSL_get_error() with the return value B to find out the reason. SSLv2 (deprecated) does not support a shutdown alert protocol, so it can only be detected, whether the underlying connection was closed. It cannot be checked, why the closure happened. -=item E0 +Old documentation indicated a difference between 0 and -1, and that -1 was +retryable. +You should instead call SSL_get_error() to find out if it's retryable. -The write operation was not successful, because either an error occurred -or action must be taken by the calling process. Call SSL_get_error() with the -return value B to find out the reason. - =back =head1 SEE ALSO --- crypto/openssl/engines/ccgost/Makefile.orig +++ crypto/openssl/engines/ccgost/Makefile @@ -32,7 +32,7 @@ $(MAKE) -f $(TOP)/Makefile.shared -e \ LIBNAME=$(LIBNAME) \ LIBEXTRAS='$(LIBOBJ)' \ - LIBDEPS='-L$(TOP) -lcrypto' \ + LIBDEPS='-L$(TOP) -lcrypto $(EX_LIBS)' \ link_o.$(SHLIB_TARGET); \ else \ $(AR) $(LIB) $(LIBOBJ); \ --- crypto/openssl/ssl/bad_dtls_test.c.orig +++ crypto/openssl/ssl/bad_dtls_test.c @@ -756,6 +756,7 @@ BIO *rbio; BIO *wbio; BIO *err; + time_t now = 0; int testresult = 0; int ret; int i; @@ -773,8 +774,10 @@ RAND_bytes(master_secret, sizeof(master_secret)); RAND_bytes(cookie, sizeof(cookie)); RAND_bytes(server_random + 4, sizeof(server_random) - 4); - time((void *)server_random); + now = time(NULL); + memcpy(server_random, &now, sizeof(now)); + sess = client_session(); if (sess == NULL) { printf("Failed to generate SSL_SESSION\n"); --- crypto/openssl/ssl/s23_pkt.c.orig +++ crypto/openssl/ssl/s23_pkt.c @@ -63,6 +63,9 @@ #include #include +/* + * Return values are as per SSL_write() + */ int ssl23_write_bytes(SSL *s) { int i, num, tot; @@ -77,7 +80,7 @@ if (i <= 0) { s->init_off = tot; s->init_num = num; - return (i); + return i; } s->rwstate = SSL_NOTHING; if (i == num) @@ -88,7 +91,10 @@ } } -/* return regularly only when we have read (at least) 'n' bytes */ +/* return regularly only when we have read (at least) 'n' bytes + * + * Return values are as per SSL_read() + */ int ssl23_read_bytes(SSL *s, int n) { unsigned char *p; @@ -102,7 +108,7 @@ j = BIO_read(s->rbio, (char *)&(p[s->packet_length]), n - s->packet_length); if (j <= 0) - return (j); + return j; s->rwstate = SSL_NOTHING; s->packet_length += j; if (s->packet_length >= (unsigned int)n) --- crypto/openssl/ssl/s2_lib.c.orig +++ crypto/openssl/ssl/s2_lib.c @@ -254,7 +254,7 @@ SSL_3DES, SSL_MD5, SSL_SSLV2, - SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_HIGH, + SSL_NOT_DEFAULT | SSL_NOT_EXP | SSL_MEDIUM, 0, 112, 168, --- crypto/openssl/ssl/s2_pkt.c.orig +++ crypto/openssl/ssl/s2_pkt.c @@ -307,6 +307,9 @@ return ssl2_read_internal(s, buf, len, 1); } +/* + * Return values are as per SSL_read() + */ static int read_n(SSL *s, unsigned int n, unsigned int max, unsigned int extend) { @@ -374,7 +377,7 @@ # endif if (i <= 0) { s->s2->rbuf_left += newb; - return (i); + return i; } newb += i; } @@ -441,6 +444,9 @@ } } +/* + * Return values are as per SSL_write() + */ static int write_pending(SSL *s, const unsigned char *buf, unsigned int len) { int i; @@ -477,7 +483,7 @@ s->rwstate = SSL_NOTHING; return (s->s2->wpend_ret); } else if (i <= 0) - return (i); + return i; s->s2->wpend_off += i; s->s2->wpend_len -= i; } --- crypto/openssl/ssl/s3_clnt.c.orig +++ crypto/openssl/ssl/s3_clnt.c @@ -1710,12 +1710,6 @@ } p += i; - if (BN_is_zero(dh->p)) { - SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_BAD_DH_P_VALUE); - goto f_err; - } - - if (2 > n - param_len) { SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_LENGTH_TOO_SHORT); goto f_err; @@ -1736,11 +1730,6 @@ } p += i; - if (BN_is_zero(dh->g)) { - SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_BAD_DH_G_VALUE); - goto f_err; - } - if (2 > n - param_len) { SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_LENGTH_TOO_SHORT); goto f_err; @@ -1767,6 +1756,39 @@ goto f_err; } + /*- + * Check that p and g are suitable enough + * + * p is odd + * 1 < g < p - 1 + */ + { + BIGNUM *tmp = NULL; + + if (!BN_is_odd(dh->p)) { + SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_BAD_DH_P_VALUE); + goto f_err; + } + if (BN_is_negative(dh->g) || BN_is_zero(dh->g) + || BN_is_one(dh->g)) { + SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_BAD_DH_G_VALUE); + goto f_err; + } + if ((tmp = BN_new()) == NULL + || BN_copy(tmp, dh->p) == NULL + || !BN_sub_word(tmp, 1)) { + BN_free(tmp); + SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, ERR_R_BN_LIB); + goto err; + } + if (BN_cmp(dh->g, tmp) >= 0) { + BN_free(tmp); + SSLerr(SSL_F_SSL3_GET_KEY_EXCHANGE, SSL_R_BAD_DH_G_VALUE); + goto f_err; + } + BN_free(tmp); + } + # ifndef OPENSSL_NO_RSA if (alg_a & SSL_aRSA) pkey = --- crypto/openssl/ssl/s3_pkt.c.orig +++ crypto/openssl/ssl/s3_pkt.c @@ -136,6 +136,9 @@ unsigned int len, int create_empty_fragment); static int ssl3_get_record(SSL *s); +/* + * Return values are as per SSL_read() + */ int ssl3_read_n(SSL *s, int n, int max, int extend) { /* @@ -1082,7 +1085,10 @@ return -1; } -/* if s->s3->wbuf.left != 0, we need to call this */ +/* if s->s3->wbuf.left != 0, we need to call this + * + * Return values are as per SSL_write(), i.e. + */ int ssl3_write_pending(SSL *s, int type, const unsigned char *buf, unsigned int len) { @@ -1122,7 +1128,7 @@ */ wb->left = 0; } - return (i); + return i; } wb->offset += i; wb->left -= i; @@ -1593,16 +1599,13 @@ switch (rr->type) { default: -#ifndef OPENSSL_NO_TLS /* - * TLS up to v1.1 just ignores unknown message types: TLS v1.2 give - * an unexpected message alert. + * TLS 1.0 and 1.1 say you SHOULD ignore unrecognised record types, but + * TLS 1.2 says you MUST send an unexpected message alert. We use the + * TLS 1.2 behaviour for all protocol versions to prevent issues where + * no progress is being made and the peer continually sends unrecognised + * record types, using up resources processing them. */ - if (s->version >= TLS1_VERSION && s->version <= TLS1_1_VERSION) { - rr->length = 0; - goto start; - } -#endif al = SSL_AD_UNEXPECTED_MESSAGE; SSLerr(SSL_F_SSL3_READ_BYTES, SSL_R_UNEXPECTED_RECORD); goto f_err; --- crypto/openssl/ssl/s3_srvr.c.orig +++ crypto/openssl/ssl/s3_srvr.c @@ -506,7 +506,7 @@ * if SSL_VERIFY_CLIENT_ONCE is set, don't request cert * during re-negotiation: */ - ((s->session->peer != NULL) && + (s->s3->tmp.finish_md_len != 0 && (s->verify_mode & SSL_VERIFY_CLIENT_ONCE)) || /* * never request cert in anonymous ciphersuites (see @@ -1465,9 +1465,9 @@ /* Handles TLS extensions that we couldn't check earlier */ if (s->version >= SSL3_VERSION) { - if (ssl_check_clienthello_tlsext_late(s) <= 0) { + if (!ssl_check_clienthello_tlsext_late(s, &al)) { SSLerr(SSL_F_SSL3_GET_CLIENT_HELLO, SSL_R_CLIENTHELLO_TLSEXT); - goto err; + goto f_err; } } @@ -1601,6 +1601,9 @@ unsigned int u; #endif #ifndef OPENSSL_NO_DH +# ifdef OPENSSL_NO_RSA + int j; +# endif DH *dh = NULL, *dhp; #endif #ifndef OPENSSL_NO_ECDH @@ -1862,6 +1865,16 @@ n += 1 + nr[i]; else #endif +#ifndef OPENSSL_NO_DH + /* + * for interoperability with some versions of the Microsoft TLS + * stack, we need to zero pad the DHE pub key to the same length + * as the prime, so use the length of the prime here + */ + if ((i == 2) && (type & (SSL_kEDH))) + n += 2 + nr[0]; + else +#endif n += 2 + nr[i]; } @@ -1896,6 +1909,20 @@ p++; } else #endif +#ifndef OPENSSL_NO_DH + /* + * for interoperability with some versions of the Microsoft TLS + * stack, we need to zero pad the DHE pub key to the same length + * as the prime + */ + if ((i == 2) && (type & (SSL_kEDH))) { + s2n(nr[0], p); + for (j = 0; j < (nr[0] - nr[2]); ++j) { + *p = 0; + ++p; + } + } else +#endif s2n(nr[i], p); BN_bn2bin(r[i], p); p += nr[i]; --- crypto/openssl/ssl/ssl_cert.c.orig +++ crypto/openssl/ssl/ssl_cert.c @@ -315,7 +315,7 @@ OPENSSL_malloc(cert->pkeys[i].serverinfo_length); if (ret->pkeys[i].serverinfo == NULL) { SSLerr(SSL_F_SSL_CERT_DUP, ERR_R_MALLOC_FAILURE); - return NULL; + goto err; } ret->pkeys[i].serverinfo_length = cert->pkeys[i].serverinfo_length; @@ -392,9 +392,7 @@ return (ret); -#if !defined(OPENSSL_NO_DH) || !defined(OPENSSL_NO_ECDH) err: -#endif #ifndef OPENSSL_NO_RSA if (ret->rsa_tmp != NULL) RSA_free(ret->rsa_tmp); --- crypto/openssl/ssl/ssl_err.c.orig +++ crypto/openssl/ssl/ssl_err.c @@ -753,6 +753,7 @@ "tls illegal exporter label"}, {ERR_REASON(SSL_R_TLS_INVALID_ECPOINTFORMAT_LIST), "tls invalid ecpointformat list"}, + {ERR_REASON(SSL_R_TOO_MANY_WARN_ALERTS), "too many warn alerts"}, {ERR_REASON(SSL_R_TLS_PEER_DID_NOT_RESPOND_WITH_CERTIFICATE_LIST), "tls peer did not respond with certificate list"}, {ERR_REASON(SSL_R_TLS_RSA_ENCRYPTED_VALUE_LENGTH_IS_WRONG), --- crypto/openssl/ssl/ssl_lib.c.orig +++ crypto/openssl/ssl/ssl_lib.c @@ -2030,10 +2030,8 @@ ret->rbuf_freelist->len = 0; ret->rbuf_freelist->head = NULL; ret->wbuf_freelist = OPENSSL_malloc(sizeof(SSL3_BUF_FREELIST)); - if (!ret->wbuf_freelist) { - OPENSSL_free(ret->rbuf_freelist); + if (!ret->wbuf_freelist) goto err; - } ret->wbuf_freelist->chunklen = 0; ret->wbuf_freelist->len = 0; ret->wbuf_freelist->head = NULL; --- crypto/openssl/ssl/ssl_locl.h.orig +++ crypto/openssl/ssl/ssl_locl.h @@ -1384,7 +1384,7 @@ int ssl_parse_clienthello_tlsext(SSL *s, unsigned char **data, unsigned char *limit); int tls1_set_server_sigalgs(SSL *s); -int ssl_check_clienthello_tlsext_late(SSL *s); +int ssl_check_clienthello_tlsext_late(SSL *s, int *al); int ssl_parse_serverhello_tlsext(SSL *s, unsigned char **data, unsigned char *d, int n); int ssl_prepare_clienthello_tlsext(SSL *s); --- crypto/openssl/ssl/ssl_sess.c.orig +++ crypto/openssl/ssl/ssl_sess.c @@ -769,6 +769,15 @@ * obtain the same session from an external cache) */ s = NULL; + } else if (s == NULL && + lh_SSL_SESSION_retrieve(ctx->sessions, c) == NULL) { + /* s == NULL can also mean OOM error in lh_SSL_SESSION_insert ... */ + + /* + * ... so take back the extra reference and also don't add + * the session to the SSL_SESSION_list at this time + */ + s = c; } /* Put at the head of the queue unless it is already in the cache */ --- crypto/openssl/ssl/t1_lib.c.orig +++ crypto/openssl/ssl/t1_lib.c @@ -132,6 +132,9 @@ int ssl_check_serverhello_tlsext(SSL *s); #endif +#define CHECKLEN(curr, val, limit) \ + (((curr) >= (limit)) || (size_t)((limit) - (curr)) < (size_t)(val)) + SSL3_ENC_METHOD TLSv1_enc_data = { tls1_enc, tls1_mac, @@ -1263,8 +1266,7 @@ if (s->tlsext_hostname != NULL) { /* Add TLS extension servername to the Client Hello message */ - unsigned long size_str; - long lenmax; + size_t size_str; /*- * check for enough space. @@ -1274,10 +1276,8 @@ * 2 for hostname length * + hostname length */ - - if ((lenmax = limit - ret - 9) < 0 - || (size_str = - strlen(s->tlsext_hostname)) > (unsigned long)lenmax) + size_str = strlen(s->tlsext_hostname); + if (CHECKLEN(ret, 9 + size_str, limit)) return NULL; /* extension type and length */ @@ -1321,7 +1321,7 @@ if (s->srp_ctx.login != NULL) { /* Add TLS extension SRP username to the * Client Hello message */ - int login_len = strlen(s->srp_ctx.login); + size_t login_len = strlen(s->srp_ctx.login); if (login_len > 255 || login_len == 0) { SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); return NULL; @@ -1333,7 +1333,7 @@ * 1 for the srp user identity * + srp user identity length */ - if ((limit - ret - 5 - login_len) < 0) + if (CHECKLEN(ret, 5 + login_len, limit)) return NULL; /* fill in the extension */ @@ -1350,20 +1350,23 @@ /* * Add TLS extension ECPointFormats to the ClientHello message */ - long lenmax; const unsigned char *pcurves, *pformats; size_t num_curves, num_formats, curves_list_len; tls1_get_formatlist(s, &pformats, &num_formats); - if ((lenmax = limit - ret - 5) < 0) - return NULL; - if (num_formats > (size_t)lenmax) - return NULL; if (num_formats > 255) { SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); return NULL; } + /*- + * check for enough space. + * 4 bytes for the ec point formats type and extension length + * 1 byte for the length of the formats + * + formats length + */ + if (CHECKLEN(ret, 5 + num_formats, limit)) + return NULL; s2n(TLSEXT_TYPE_ec_point_formats, ret); /* The point format list has 1-byte length. */ @@ -1379,15 +1382,20 @@ if (!tls1_get_curvelist(s, 0, &pcurves, &num_curves)) return NULL; - if ((lenmax = limit - ret - 6) < 0) - return NULL; - if (num_curves > (size_t)lenmax / 2) - return NULL; if (num_curves > 65532 / 2) { SSLerr(SSL_F_SSL_ADD_CLIENTHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); return NULL; } curves_list_len = 2 * num_curves; + /*- + * check for enough space. + * 4 bytes for the ec curves type and extension length + * 2 bytes for the curve list length + * + curve list length + */ + if (CHECKLEN(ret, 6 + curves_list_len, limit)) + return NULL; + s2n(TLSEXT_TYPE_elliptic_curves, ret); s2n(curves_list_len + 2, ret); s2n(curves_list_len, ret); @@ -1397,7 +1405,7 @@ # endif /* OPENSSL_NO_EC */ if (!(SSL_get_options(s) & SSL_OP_NO_TICKET)) { - int ticklen; + size_t ticklen; if (!s->new_session && s->session && s->session->tlsext_tick) ticklen = s->session->tlsext_ticklen; else if (s->session && s->tlsext_session_ticket && @@ -1418,11 +1426,11 @@ * Check for enough room 2 for extension type, 2 for len rest for * ticket */ - if ((long)(limit - ret - 4 - ticklen) < 0) + if (CHECKLEN(ret, 4 + ticklen, limit)) return NULL; s2n(TLSEXT_TYPE_session_ticket, ret); s2n(ticklen, ret); - if (ticklen) { + if (ticklen > 0) { memcpy(ret, s->session->tlsext_tick, ticklen); ret += ticklen; } @@ -1433,7 +1441,14 @@ size_t salglen; const unsigned char *salg; salglen = tls12_get_psigalgs(s, &salg); - if ((size_t)(limit - ret) < salglen + 6) + + /*- + * check for enough space. + * 4 bytes for the sigalgs type and extension length + * 2 bytes for the sigalg list length + * + sigalg list length + */ + if (CHECKLEN(ret, salglen + 6, limit)) return NULL; s2n(TLSEXT_TYPE_signature_algorithms, ret); s2n(salglen + 2, ret); @@ -1460,30 +1475,42 @@ if (s->tlsext_status_type == TLSEXT_STATUSTYPE_ocsp) { int i; - long extlen, idlen, itmp; + size_t extlen, idlen; + int lentmp; OCSP_RESPID *id; idlen = 0; for (i = 0; i < sk_OCSP_RESPID_num(s->tlsext_ocsp_ids); i++) { id = sk_OCSP_RESPID_value(s->tlsext_ocsp_ids, i); - itmp = i2d_OCSP_RESPID(id, NULL); - if (itmp <= 0) + lentmp = i2d_OCSP_RESPID(id, NULL); + if (lentmp <= 0) return NULL; - idlen += itmp + 2; + idlen += (size_t)lentmp + 2; } if (s->tlsext_ocsp_exts) { - extlen = i2d_X509_EXTENSIONS(s->tlsext_ocsp_exts, NULL); - if (extlen < 0) + lentmp = i2d_X509_EXTENSIONS(s->tlsext_ocsp_exts, NULL); + if (lentmp < 0) return NULL; + extlen = (size_t)lentmp; } else extlen = 0; - if ((long)(limit - ret - 7 - extlen - idlen) < 0) + if (extlen + idlen > 0xFFF0) return NULL; + /* + * 2 bytes for status request type + * 2 bytes for status request len + * 1 byte for OCSP request type + * 2 bytes for length of ids + * 2 bytes for length of extensions + * + length of ids + * + length of extensions + */ + if (CHECKLEN(ret, 9 + idlen + extlen, limit)) + return NULL; + s2n(TLSEXT_TYPE_status_request, ret); - if (extlen + idlen > 0xFFF0) - return NULL; s2n(extlen + idlen + 5, ret); *(ret++) = TLSEXT_STATUSTYPE_ocsp; s2n(idlen, ret); @@ -1493,9 +1520,9 @@ id = sk_OCSP_RESPID_value(s->tlsext_ocsp_ids, i); /* skip over id len */ ret += 2; - itmp = i2d_OCSP_RESPID(id, &ret); + lentmp = i2d_OCSP_RESPID(id, &ret); /* write id len */ - s2n(itmp, q); + s2n(lentmp, q); } s2n(extlen, ret); if (extlen > 0) @@ -1503,8 +1530,15 @@ } # ifndef OPENSSL_NO_HEARTBEATS /* Add Heartbeat extension */ - if ((limit - ret - 4 - 1) < 0) + + /*- + * check for enough space. + * 4 bytes for the heartbeat ext type and extension length + * 1 byte for the mode + */ + if (CHECKLEN(ret, 5, limit)) return NULL; + s2n(TLSEXT_TYPE_heartbeat, ret); s2n(1, ret); /*- @@ -1524,7 +1558,12 @@ * The client advertises an emtpy extension to indicate its support * for Next Protocol Negotiation */ - if (limit - ret - 4 < 0) + + /*- + * check for enough space. + * 4 bytes for the NPN ext type and extension length + */ + if (CHECKLEN(ret, 4, limit)) return NULL; s2n(TLSEXT_TYPE_next_proto_neg, ret); s2n(0, ret); @@ -1532,7 +1571,13 @@ # endif if (s->alpn_client_proto_list && !s->s3->tmp.finish_md_len) { - if ((size_t)(limit - ret) < 6 + s->alpn_client_proto_list_len) + /*- + * check for enough space. + * 4 bytes for the ALPN type and extension length + * 2 bytes for the ALPN protocol list length + * + ALPN protocol list length + */ + if (CHECKLEN(ret, 6 + s->alpn_client_proto_list_len, limit)) return NULL; s2n(TLSEXT_TYPE_application_layer_protocol_negotiation, ret); s2n(2 + s->alpn_client_proto_list_len, ret); @@ -1547,7 +1592,12 @@ ssl_add_clienthello_use_srtp_ext(s, 0, &el, 0); - if ((limit - ret - 4 - el) < 0) + /*- + * check for enough space. + * 4 bytes for the SRTP type and extension length + * + SRTP profiles length + */ + if (CHECKLEN(ret, 4 + el, limit)) return NULL; s2n(TLSEXT_TYPE_use_srtp, ret); @@ -1587,6 +1637,17 @@ else hlen = 0; + /*- + * check for enough space. Strictly speaking we know we've already + * got enough space because to get here the message size is < 0x200, + * but we know that we've allocated far more than that in the buffer + * - but for consistency and robustness we're going to check anyway. + * + * 4 bytes for the padding type and extension length + * + padding length + */ + if (CHECKLEN(ret, 4 + hlen, limit)) + return NULL; s2n(TLSEXT_TYPE_padding, ret); s2n(hlen, ret); memset(ret, 0, hlen); @@ -1644,7 +1705,12 @@ return NULL; } - if ((limit - ret - 4 - el) < 0) + /*- + * check for enough space. + * 4 bytes for the reneg type and extension length + * + reneg data length + */ + if (CHECKLEN(ret, 4 + el, limit)) return NULL; s2n(TLSEXT_TYPE_renegotiate, ret); @@ -1664,19 +1730,23 @@ /* * Add TLS extension ECPointFormats to the ServerHello message */ - long lenmax; tls1_get_formatlist(s, &plist, &plistlen); - if ((lenmax = limit - ret - 5) < 0) - return NULL; - if (plistlen > (size_t)lenmax) - return NULL; if (plistlen > 255) { SSLerr(SSL_F_SSL_ADD_SERVERHELLO_TLSEXT, ERR_R_INTERNAL_ERROR); return NULL; } + /*- + * check for enough space. + * 4 bytes for the ec points format type and extension length + * 1 byte for the points format list length + * + length of points format list + */ + if (CHECKLEN(ret, 5 + plistlen, limit)) + return NULL; + s2n(TLSEXT_TYPE_ec_point_formats, ret); s2n(plistlen + 1, ret); *(ret++) = (unsigned char)plistlen; @@ -1691,7 +1761,11 @@ # endif /* OPENSSL_NO_EC */ if (s->tlsext_ticket_expected && !(SSL_get_options(s) & SSL_OP_NO_TICKET)) { - if ((long)(limit - ret - 4) < 0) + /*- + * check for enough space. + * 4 bytes for the Ticket type and extension length + */ + if (CHECKLEN(ret, 4, limit)) return NULL; s2n(TLSEXT_TYPE_session_ticket, ret); s2n(0, ret); @@ -1698,7 +1772,11 @@ } if (s->tlsext_status_expected) { - if ((long)(limit - ret - 4) < 0) + /*- + * check for enough space. + * 4 bytes for the Status request type and extension length + */ + if (CHECKLEN(ret, 4, limit)) return NULL; s2n(TLSEXT_TYPE_status_request, ret); s2n(0, ret); @@ -1726,7 +1804,12 @@ ssl_add_serverhello_use_srtp_ext(s, 0, &el, 0); - if ((limit - ret - 4 - el) < 0) + /*- + * check for enough space. + * 4 bytes for the SRTP profiles type and extension length + * + length of the SRTP profiles list + */ + if (CHECKLEN(ret, 4 + el, limit)) return NULL; s2n(TLSEXT_TYPE_use_srtp, ret); @@ -1751,16 +1834,23 @@ 0x2a, 0x85, 0x03, 0x02, 0x02, 0x16, 0x30, 0x08, 0x06, 0x06, 0x2a, 0x85, 0x03, 0x02, 0x02, 0x17 }; - if (limit - ret < 36) + + /* check for enough space. */ + if (CHECKLEN(ret, sizeof(cryptopro_ext), limit)) return NULL; - memcpy(ret, cryptopro_ext, 36); - ret += 36; + memcpy(ret, cryptopro_ext, sizeof(cryptopro_ext)); + ret += sizeof(cryptopro_ext); } # ifndef OPENSSL_NO_HEARTBEATS /* Add Heartbeat extension if we've received one */ if (s->tlsext_heartbeat & SSL_TLSEXT_HB_ENABLED) { - if ((limit - ret - 4 - 1) < 0) + /*- + * check for enough space. + * 4 bytes for the Heartbeat type and extension length + * 1 byte for the mode + */ + if (CHECKLEN(ret, 5, limit)) return NULL; s2n(TLSEXT_TYPE_heartbeat, ret); s2n(1, ret); @@ -1789,7 +1879,12 @@ s-> ctx->next_protos_advertised_cb_arg); if (r == SSL_TLSEXT_ERR_OK) { - if ((long)(limit - ret - 4 - npalen) < 0) + /*- + * check for enough space. + * 4 bytes for the NPN type and extension length + * + length of protocols list + */ + if (CHECKLEN(ret, 4 + npalen, limit)) return NULL; s2n(TLSEXT_TYPE_next_proto_neg, ret); s2n(npalen, ret); @@ -1804,9 +1899,16 @@ if (s->s3->alpn_selected) { const unsigned char *selected = s->s3->alpn_selected; - unsigned len = s->s3->alpn_selected_len; + size_t len = s->s3->alpn_selected_len; - if ((long)(limit - ret - 4 - 2 - 1 - len) < 0) + /*- + * check for enough space. + * 4 bytes for the ALPN type and extension length + * 2 bytes for ALPN data length + * 1 byte for selected protocol length + * + length of the selected protocol + */ + if (CHECKLEN(ret, 7 + len, limit)) return NULL; s2n(TLSEXT_TYPE_application_layer_protocol_negotiation, ret); s2n(3 + len, ret); @@ -1966,11 +2068,10 @@ /* * Process the ALPN extension in a ClientHello. - * ret: a pointer to the TLSEXT return value: SSL_TLSEXT_ERR_* * al: a pointer to the alert value to send in the event of a failure. - * returns 1 on success, 0 on failure: al/ret set only on failure + * returns 1 on success, 0 on failure: al set only on failure */ -static int tls1_alpn_handle_client_hello_late(SSL *s, int *ret, int *al) +static int tls1_alpn_handle_client_hello_late(SSL *s, int *al) { const unsigned char *selected = NULL; unsigned char selected_len = 0; @@ -1986,7 +2087,6 @@ s->s3->alpn_selected = OPENSSL_malloc(selected_len); if (s->s3->alpn_selected == NULL) { *al = SSL_AD_INTERNAL_ERROR; - *ret = SSL_TLSEXT_ERR_ALERT_FATAL; return 0; } memcpy(s->s3->alpn_selected, selected, selected_len); @@ -3064,10 +3164,12 @@ return 0; } -int ssl_check_clienthello_tlsext_late(SSL *s) +/* + * Upon success, returns 1. + * Upon failure, returns 0 and sets |al| to the appropriate fatal alert. + */ +int ssl_check_clienthello_tlsext_late(SSL *s, int *al) { - int ret = SSL_TLSEXT_ERR_OK; - int al; /* * If status request then ask callback what to do. Note: this must be @@ -3076,58 +3178,41 @@ * influence which certificate is sent */ if ((s->tlsext_status_type != -1) && s->ctx && s->ctx->tlsext_status_cb) { - int r; + int ret; CERT_PKEY *certpkey; certpkey = ssl_get_server_send_pkey(s); /* If no certificate can't return certificate status */ - if (certpkey == NULL) { - s->tlsext_status_expected = 0; - return 1; - } - /* - * Set current certificate to one we will use so SSL_get_certificate - * et al can pick it up. - */ - s->cert->key = certpkey; - r = s->ctx->tlsext_status_cb(s, s->ctx->tlsext_status_arg); - switch (r) { - /* We don't want to send a status request response */ - case SSL_TLSEXT_ERR_NOACK: - s->tlsext_status_expected = 0; - break; - /* status request response should be sent */ - case SSL_TLSEXT_ERR_OK: - if (s->tlsext_ocsp_resp) - s->tlsext_status_expected = 1; - else + if (certpkey != NULL) { + /* + * Set current certificate to one we will use so SSL_get_certificate + * et al can pick it up. + */ + s->cert->key = certpkey; + ret = s->ctx->tlsext_status_cb(s, s->ctx->tlsext_status_arg); + switch (ret) { + /* We don't want to send a status request response */ + case SSL_TLSEXT_ERR_NOACK: s->tlsext_status_expected = 0; - break; - /* something bad happened */ - case SSL_TLSEXT_ERR_ALERT_FATAL: - ret = SSL_TLSEXT_ERR_ALERT_FATAL; - al = SSL_AD_INTERNAL_ERROR; - goto err; + break; + /* status request response should be sent */ + case SSL_TLSEXT_ERR_OK: + if (s->tlsext_ocsp_resp) + s->tlsext_status_expected = 1; + break; + /* something bad happened */ + case SSL_TLSEXT_ERR_ALERT_FATAL: + default: + *al = SSL_AD_INTERNAL_ERROR; + return 0; + } } - } else - s->tlsext_status_expected = 0; + } - if (!tls1_alpn_handle_client_hello_late(s, &ret, &al)) { - goto err; + if (!tls1_alpn_handle_client_hello_late(s, al)) { + return 0; } - err: - switch (ret) { - case SSL_TLSEXT_ERR_ALERT_FATAL: - ssl3_send_alert(s, SSL3_AL_FATAL, al); - return -1; - - case SSL_TLSEXT_ERR_ALERT_WARNING: - ssl3_send_alert(s, SSL3_AL_WARNING, al); - return 1; - - default: - return 1; - } + return 1; } int ssl_check_serverhello_tlsext(SSL *s) --- crypto/openssl/util/domd.orig +++ crypto/openssl/util/domd @@ -11,7 +11,9 @@ fi if [ "$MAKEDEPEND" = "" ]; then MAKEDEPEND=makedepend; fi -cp Makefile Makefile.save +# Preserve Makefile timestamp by moving instead of copying (cp -p is GNU only) +mv Makefile Makefile.save +cp Makefile.save Makefile # fake the presence of Kerberos touch $TOP/krb5.h if ${MAKEDEPEND} --version 2>&1 | grep "clang" > /dev/null || @@ -32,7 +34,12 @@ ${PERL} $TOP/util/clean-depend.pl < Makefile > Makefile.new RC=$? fi -mv Makefile.new Makefile +if ! cmp -s Makefile.save Makefile.new; then + mv Makefile.new Makefile +else + mv Makefile.save Makefile + rm -f Makefile.new +fi # unfake the presence of Kerberos rm $TOP/krb5.h --- crypto/openssl/util/mklink.pl.orig +++ crypto/openssl/util/mklink.pl @@ -55,9 +55,11 @@ foreach $file (@files) { my $err = ""; if ($symlink_exists) { - unlink "$from/$file"; - symlink("$to/$file", "$from/$file") or $err = " [$!]"; - } else { + if (!-l "$from/$file") { + unlink "$from/$file"; + symlink("$to/$file", "$from/$file") or $err = " [$!]"; + } + } elsif (-d "$from" && (!-f "$from/$file" || ((stat("$file"))[9] > (stat("$from/$file"))[9]))) { unlink "$from/$file"; open (OLD, "<$file") or die "Can't open $file: $!"; open (NEW, ">$from/$file") or die "Can't open $from/$file: $!"; --- secure/lib/libcrypto/Makefile.inc.orig +++ secure/lib/libcrypto/Makefile.inc @@ -3,8 +3,8 @@ .include # OpenSSL version used for manual page generation -OPENSSL_VER= 1.0.2j -OPENSSL_DATE= 2016-09-26 +OPENSSL_VER= 1.0.2k +OPENSSL_DATE= 2017-01-26 LCRYPTO_SRC= ${.CURDIR}/../../../crypto/openssl LCRYPTO_DOC= ${LCRYPTO_SRC}/doc --- secure/lib/libcrypto/amd64/x86_64-mont.S.orig +++ secure/lib/libcrypto/amd64/x86_64-mont.S @@ -997,11 +997,11 @@ mulxq 16(%rsi),%r15,%r13 adoxq -24(%rbx),%r11 adcxq %r15,%r12 - adoxq %rbp,%r12 + adoxq -16(%rbx),%r12 adcxq %rbp,%r13 + adoxq %rbp,%r13 movq %rdi,8(%rsp) -.byte 0x67 movq %r8,%r15 imulq 24(%rsp),%r8 xorl %ebp,%ebp @@ -1008,7 +1008,6 @@ mulxq 24(%rsi),%rax,%r14 movq %r8,%rdx - adoxq -16(%rbx),%r12 adcxq %rax,%r13 adoxq -8(%rbx),%r13 adcxq %rbp,%r14 --- secure/lib/libcrypto/amd64/x86_64-mont5.S.orig +++ secure/lib/libcrypto/amd64/x86_64-mont5.S @@ -1891,6 +1891,7 @@ .align 32 .L8x_tail_done: + xorq %rax,%rax addq (%rdx),%r8 adcq $0,%r9 adcq $0,%r10 @@ -1899,10 +1900,8 @@ adcq $0,%r13 adcq $0,%r14 adcq $0,%r15 + adcq $0,%rax - - xorq %rax,%rax - negq %rsi .L8x_no_tail: adcq 0(%rdi),%r8 @@ -3346,6 +3345,7 @@ .align 32 .Lsqrx8x_tail_done: + xorq %rax,%rax addq 24+8(%rsp),%r8 adcq $0,%r9 adcq $0,%r10 @@ -3354,10 +3354,8 @@ adcq $0,%r13 adcq $0,%r14 adcq $0,%r15 + adcq $0,%rax - - movq %rsi,%rax - subq 16+8(%rsp),%rsi .Lsqrx8x_no_tail: adcq 0(%rdi),%r8 @@ -3371,7 +3369,7 @@ adcq 40(%rdi),%r13 adcq 48(%rdi),%r14 adcq 56(%rdi),%r15 - adcq %rax,%rax + adcq $0,%rax movq 32+8(%rsp),%rbx movq 64(%rdi,%rcx,1),%rdx --- secure/lib/libcrypto/man/ASN1_OBJECT_new.3.orig +++ secure/lib/libcrypto/man/ASN1_OBJECT_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ASN1_OBJECT_new 3" -.TH ASN1_OBJECT_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ASN1_OBJECT_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ASN1_STRING_length.3.orig +++ secure/lib/libcrypto/man/ASN1_STRING_length.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ASN1_STRING_length 3" -.TH ASN1_STRING_length 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ASN1_STRING_length 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ASN1_STRING_new.3.orig +++ secure/lib/libcrypto/man/ASN1_STRING_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ASN1_STRING_new 3" -.TH ASN1_STRING_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ASN1_STRING_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ASN1_STRING_print_ex.3.orig +++ secure/lib/libcrypto/man/ASN1_STRING_print_ex.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ASN1_STRING_print_ex 3" -.TH ASN1_STRING_print_ex 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ASN1_STRING_print_ex 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ASN1_TIME_set.3.orig +++ secure/lib/libcrypto/man/ASN1_TIME_set.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ASN1_TIME_set 3" -.TH ASN1_TIME_set 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ASN1_TIME_set 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ASN1_generate_nconf.3.orig +++ secure/lib/libcrypto/man/ASN1_generate_nconf.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ASN1_generate_nconf 3" -.TH ASN1_generate_nconf 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ASN1_generate_nconf 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_ctrl.3.orig +++ secure/lib/libcrypto/man/BIO_ctrl.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_ctrl 3" -.TH BIO_ctrl 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_ctrl 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_f_base64.3.orig +++ secure/lib/libcrypto/man/BIO_f_base64.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_f_base64 3" -.TH BIO_f_base64 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_f_base64 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_f_buffer.3.orig +++ secure/lib/libcrypto/man/BIO_f_buffer.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_f_buffer 3" -.TH BIO_f_buffer 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_f_buffer 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_f_cipher.3.orig +++ secure/lib/libcrypto/man/BIO_f_cipher.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_f_cipher 3" -.TH BIO_f_cipher 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_f_cipher 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_f_md.3.orig +++ secure/lib/libcrypto/man/BIO_f_md.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_f_md 3" -.TH BIO_f_md 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_f_md 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_f_null.3.orig +++ secure/lib/libcrypto/man/BIO_f_null.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_f_null 3" -.TH BIO_f_null 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_f_null 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_f_ssl.3.orig +++ secure/lib/libcrypto/man/BIO_f_ssl.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_f_ssl 3" -.TH BIO_f_ssl 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_f_ssl 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_find_type.3.orig +++ secure/lib/libcrypto/man/BIO_find_type.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_find_type 3" -.TH BIO_find_type 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_find_type 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_new.3.orig +++ secure/lib/libcrypto/man/BIO_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_new 3" -.TH BIO_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_new_CMS.3.orig +++ secure/lib/libcrypto/man/BIO_new_CMS.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_new_CMS 3" -.TH BIO_new_CMS 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_new_CMS 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_push.3.orig +++ secure/lib/libcrypto/man/BIO_push.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_push 3" -.TH BIO_push 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_push 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_read.3.orig +++ secure/lib/libcrypto/man/BIO_read.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_read 3" -.TH BIO_read 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_read 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_accept.3.orig +++ secure/lib/libcrypto/man/BIO_s_accept.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_accept 3" -.TH BIO_s_accept 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_accept 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_bio.3.orig +++ secure/lib/libcrypto/man/BIO_s_bio.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_bio 3" -.TH BIO_s_bio 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_bio 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_connect.3.orig +++ secure/lib/libcrypto/man/BIO_s_connect.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_connect 3" -.TH BIO_s_connect 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_connect 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_fd.3.orig +++ secure/lib/libcrypto/man/BIO_s_fd.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_fd 3" -.TH BIO_s_fd 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_fd 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_file.3.orig +++ secure/lib/libcrypto/man/BIO_s_file.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_file 3" -.TH BIO_s_file 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_file 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_mem.3.orig +++ secure/lib/libcrypto/man/BIO_s_mem.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_mem 3" -.TH BIO_s_mem 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_mem 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_null.3.orig +++ secure/lib/libcrypto/man/BIO_s_null.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_null 3" -.TH BIO_s_null 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_null 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_s_socket.3.orig +++ secure/lib/libcrypto/man/BIO_s_socket.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_s_socket 3" -.TH BIO_s_socket 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_s_socket 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_set_callback.3.orig +++ secure/lib/libcrypto/man/BIO_set_callback.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_set_callback 3" -.TH BIO_set_callback 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_set_callback 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BIO_should_retry.3.orig +++ secure/lib/libcrypto/man/BIO_should_retry.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BIO_should_retry 3" -.TH BIO_should_retry 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BIO_should_retry 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_BLINDING_new.3.orig +++ secure/lib/libcrypto/man/BN_BLINDING_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_BLINDING_new 3" -.TH BN_BLINDING_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_BLINDING_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_CTX_new.3.orig +++ secure/lib/libcrypto/man/BN_CTX_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_CTX_new 3" -.TH BN_CTX_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_CTX_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_CTX_start.3.orig +++ secure/lib/libcrypto/man/BN_CTX_start.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_CTX_start 3" -.TH BN_CTX_start 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_CTX_start 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_add.3.orig +++ secure/lib/libcrypto/man/BN_add.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_add 3" -.TH BN_add 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_add 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_add_word.3.orig +++ secure/lib/libcrypto/man/BN_add_word.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_add_word 3" -.TH BN_add_word 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_add_word 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_bn2bin.3.orig +++ secure/lib/libcrypto/man/BN_bn2bin.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_bn2bin 3" -.TH BN_bn2bin 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_bn2bin 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_cmp.3.orig +++ secure/lib/libcrypto/man/BN_cmp.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_cmp 3" -.TH BN_cmp 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_cmp 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_copy.3.orig +++ secure/lib/libcrypto/man/BN_copy.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_copy 3" -.TH BN_copy 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_copy 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_generate_prime.3.orig +++ secure/lib/libcrypto/man/BN_generate_prime.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_generate_prime 3" -.TH BN_generate_prime 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_generate_prime 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_mod_inverse.3.orig +++ secure/lib/libcrypto/man/BN_mod_inverse.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_mod_inverse 3" -.TH BN_mod_inverse 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_mod_inverse 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_mod_mul_montgomery.3.orig +++ secure/lib/libcrypto/man/BN_mod_mul_montgomery.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_mod_mul_montgomery 3" -.TH BN_mod_mul_montgomery 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_mod_mul_montgomery 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_mod_mul_reciprocal.3.orig +++ secure/lib/libcrypto/man/BN_mod_mul_reciprocal.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_mod_mul_reciprocal 3" -.TH BN_mod_mul_reciprocal 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_mod_mul_reciprocal 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_new.3.orig +++ secure/lib/libcrypto/man/BN_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_new 3" -.TH BN_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_num_bytes.3.orig +++ secure/lib/libcrypto/man/BN_num_bytes.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_num_bytes 3" -.TH BN_num_bytes 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_num_bytes 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_rand.3.orig +++ secure/lib/libcrypto/man/BN_rand.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_rand 3" -.TH BN_rand 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_rand 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_set_bit.3.orig +++ secure/lib/libcrypto/man/BN_set_bit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_set_bit 3" -.TH BN_set_bit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_set_bit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_swap.3.orig +++ secure/lib/libcrypto/man/BN_swap.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_swap 3" -.TH BN_swap 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_swap 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/BN_zero.3.orig +++ secure/lib/libcrypto/man/BN_zero.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "BN_zero 3" -.TH BN_zero 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH BN_zero 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_add0_cert.3.orig +++ secure/lib/libcrypto/man/CMS_add0_cert.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_add0_cert 3" -.TH CMS_add0_cert 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_add0_cert 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_add1_recipient_cert.3.orig +++ secure/lib/libcrypto/man/CMS_add1_recipient_cert.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_add1_recipient_cert 3" -.TH CMS_add1_recipient_cert 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_add1_recipient_cert 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_add1_signer.3.orig +++ secure/lib/libcrypto/man/CMS_add1_signer.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_add1_signer 3" -.TH CMS_add1_signer 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_add1_signer 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_compress.3.orig +++ secure/lib/libcrypto/man/CMS_compress.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_compress 3" -.TH CMS_compress 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_compress 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_decrypt.3.orig +++ secure/lib/libcrypto/man/CMS_decrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_decrypt 3" -.TH CMS_decrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_decrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_encrypt.3.orig +++ secure/lib/libcrypto/man/CMS_encrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_encrypt 3" -.TH CMS_encrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_encrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_final.3.orig +++ secure/lib/libcrypto/man/CMS_final.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_final 3" -.TH CMS_final 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_final 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_get0_RecipientInfos.3.orig +++ secure/lib/libcrypto/man/CMS_get0_RecipientInfos.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_get0_RecipientInfos 3" -.TH CMS_get0_RecipientInfos 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_get0_RecipientInfos 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_get0_SignerInfos.3.orig +++ secure/lib/libcrypto/man/CMS_get0_SignerInfos.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_get0_SignerInfos 3" -.TH CMS_get0_SignerInfos 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_get0_SignerInfos 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_get0_type.3.orig +++ secure/lib/libcrypto/man/CMS_get0_type.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_get0_type 3" -.TH CMS_get0_type 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_get0_type 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_get1_ReceiptRequest.3.orig +++ secure/lib/libcrypto/man/CMS_get1_ReceiptRequest.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_get1_ReceiptRequest 3" -.TH CMS_get1_ReceiptRequest 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_get1_ReceiptRequest 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_sign.3.orig +++ secure/lib/libcrypto/man/CMS_sign.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_sign 3" -.TH CMS_sign 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_sign 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_sign_receipt.3.orig +++ secure/lib/libcrypto/man/CMS_sign_receipt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_sign_receipt 3" -.TH CMS_sign_receipt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_sign_receipt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_uncompress.3.orig +++ secure/lib/libcrypto/man/CMS_uncompress.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_uncompress 3" -.TH CMS_uncompress 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_uncompress 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_verify.3.orig +++ secure/lib/libcrypto/man/CMS_verify.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_verify 3" -.TH CMS_verify 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_verify 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CMS_verify_receipt.3.orig +++ secure/lib/libcrypto/man/CMS_verify_receipt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS_verify_receipt 3" -.TH CMS_verify_receipt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS_verify_receipt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CONF_modules_free.3.orig +++ secure/lib/libcrypto/man/CONF_modules_free.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CONF_modules_free 3" -.TH CONF_modules_free 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CONF_modules_free 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CONF_modules_load_file.3.orig +++ secure/lib/libcrypto/man/CONF_modules_load_file.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CONF_modules_load_file 3" -.TH CONF_modules_load_file 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CONF_modules_load_file 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/CRYPTO_set_ex_data.3.orig +++ secure/lib/libcrypto/man/CRYPTO_set_ex_data.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CRYPTO_set_ex_data 3" -.TH CRYPTO_set_ex_data 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CRYPTO_set_ex_data 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DH_generate_key.3.orig +++ secure/lib/libcrypto/man/DH_generate_key.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DH_generate_key 3" -.TH DH_generate_key 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DH_generate_key 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DH_generate_parameters.3.orig +++ secure/lib/libcrypto/man/DH_generate_parameters.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DH_generate_parameters 3" -.TH DH_generate_parameters 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DH_generate_parameters 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DH_get_ex_new_index.3.orig +++ secure/lib/libcrypto/man/DH_get_ex_new_index.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DH_get_ex_new_index 3" -.TH DH_get_ex_new_index 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DH_get_ex_new_index 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DH_new.3.orig +++ secure/lib/libcrypto/man/DH_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DH_new 3" -.TH DH_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DH_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DH_set_method.3.orig +++ secure/lib/libcrypto/man/DH_set_method.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DH_set_method 3" -.TH DH_set_method 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DH_set_method 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DH_size.3.orig +++ secure/lib/libcrypto/man/DH_size.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DH_size 3" -.TH DH_size 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DH_size 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_SIG_new.3.orig +++ secure/lib/libcrypto/man/DSA_SIG_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_SIG_new 3" -.TH DSA_SIG_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_SIG_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_do_sign.3.orig +++ secure/lib/libcrypto/man/DSA_do_sign.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_do_sign 3" -.TH DSA_do_sign 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_do_sign 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_dup_DH.3.orig +++ secure/lib/libcrypto/man/DSA_dup_DH.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_dup_DH 3" -.TH DSA_dup_DH 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_dup_DH 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_generate_key.3.orig +++ secure/lib/libcrypto/man/DSA_generate_key.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_generate_key 3" -.TH DSA_generate_key 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_generate_key 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_generate_parameters.3.orig +++ secure/lib/libcrypto/man/DSA_generate_parameters.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_generate_parameters 3" -.TH DSA_generate_parameters 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_generate_parameters 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_get_ex_new_index.3.orig +++ secure/lib/libcrypto/man/DSA_get_ex_new_index.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_get_ex_new_index 3" -.TH DSA_get_ex_new_index 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_get_ex_new_index 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_new.3.orig +++ secure/lib/libcrypto/man/DSA_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_new 3" -.TH DSA_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_set_method.3.orig +++ secure/lib/libcrypto/man/DSA_set_method.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_set_method 3" -.TH DSA_set_method 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_set_method 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_sign.3.orig +++ secure/lib/libcrypto/man/DSA_sign.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_sign 3" -.TH DSA_sign 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_sign 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/DSA_size.3.orig +++ secure/lib/libcrypto/man/DSA_size.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA_size 3" -.TH DSA_size 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA_size 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EC_GFp_simple_method.3.orig +++ secure/lib/libcrypto/man/EC_GFp_simple_method.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EC_GFp_simple_method 3" -.TH EC_GFp_simple_method 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EC_GFp_simple_method 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EC_GROUP_copy.3.orig +++ secure/lib/libcrypto/man/EC_GROUP_copy.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EC_GROUP_copy 3" -.TH EC_GROUP_copy 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EC_GROUP_copy 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EC_GROUP_new.3.orig +++ secure/lib/libcrypto/man/EC_GROUP_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EC_GROUP_new 3" -.TH EC_GROUP_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EC_GROUP_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EC_KEY_new.3.orig +++ secure/lib/libcrypto/man/EC_KEY_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EC_KEY_new 3" -.TH EC_KEY_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EC_KEY_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EC_POINT_add.3.orig +++ secure/lib/libcrypto/man/EC_POINT_add.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EC_POINT_add 3" -.TH EC_POINT_add 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EC_POINT_add 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EC_POINT_new.3.orig +++ secure/lib/libcrypto/man/EC_POINT_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EC_POINT_new 3" -.TH EC_POINT_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EC_POINT_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_GET_LIB.3.orig +++ secure/lib/libcrypto/man/ERR_GET_LIB.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_GET_LIB 3" -.TH ERR_GET_LIB 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_GET_LIB 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_clear_error.3.orig +++ secure/lib/libcrypto/man/ERR_clear_error.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_clear_error 3" -.TH ERR_clear_error 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_clear_error 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_error_string.3.orig +++ secure/lib/libcrypto/man/ERR_error_string.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_error_string 3" -.TH ERR_error_string 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_error_string 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_get_error.3.orig +++ secure/lib/libcrypto/man/ERR_get_error.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_get_error 3" -.TH ERR_get_error 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_get_error 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_load_crypto_strings.3.orig +++ secure/lib/libcrypto/man/ERR_load_crypto_strings.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_load_crypto_strings 3" -.TH ERR_load_crypto_strings 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_load_crypto_strings 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_load_strings.3.orig +++ secure/lib/libcrypto/man/ERR_load_strings.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_load_strings 3" -.TH ERR_load_strings 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_load_strings 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_print_errors.3.orig +++ secure/lib/libcrypto/man/ERR_print_errors.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_print_errors 3" -.TH ERR_print_errors 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_print_errors 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_put_error.3.orig +++ secure/lib/libcrypto/man/ERR_put_error.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_put_error 3" -.TH ERR_put_error 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_put_error 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_remove_state.3.orig +++ secure/lib/libcrypto/man/ERR_remove_state.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_remove_state 3" -.TH ERR_remove_state 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_remove_state 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ERR_set_mark.3.orig +++ secure/lib/libcrypto/man/ERR_set_mark.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERR_set_mark 3" -.TH ERR_set_mark 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERR_set_mark 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_BytesToKey.3.orig +++ secure/lib/libcrypto/man/EVP_BytesToKey.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_BytesToKey 3" -.TH EVP_BytesToKey 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_BytesToKey 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_DigestInit.3.orig +++ secure/lib/libcrypto/man/EVP_DigestInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_DigestInit 3" -.TH EVP_DigestInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_DigestInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_DigestSignInit.3.orig +++ secure/lib/libcrypto/man/EVP_DigestSignInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_DigestSignInit 3" -.TH EVP_DigestSignInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_DigestSignInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -147,7 +143,7 @@ \& \& int EVP_DigestSignInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx, \& const EVP_MD *type, ENGINE *e, EVP_PKEY *pkey); -\& int EVP_DigestSignUpdate(EVP_MD_CTX *ctx, const void *d, unsigned int cnt); +\& int EVP_DigestSignUpdate(EVP_MD_CTX *ctx, const void *d, size_t cnt); \& int EVP_DigestSignFinal(EVP_MD_CTX *ctx, unsigned char *sig, size_t *siglen); .Ve .SH "DESCRIPTION" --- secure/lib/libcrypto/man/EVP_DigestVerifyInit.3.orig +++ secure/lib/libcrypto/man/EVP_DigestVerifyInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_DigestVerifyInit 3" -.TH EVP_DigestVerifyInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_DigestVerifyInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -147,7 +143,7 @@ \& \& int EVP_DigestVerifyInit(EVP_MD_CTX *ctx, EVP_PKEY_CTX **pctx, \& const EVP_MD *type, ENGINE *e, EVP_PKEY *pkey); -\& int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *d, unsigned int cnt); +\& int EVP_DigestVerifyUpdate(EVP_MD_CTX *ctx, const void *d, size_t cnt); \& int EVP_DigestVerifyFinal(EVP_MD_CTX *ctx, const unsigned char *sig, size_t siglen); .Ve .SH "DESCRIPTION" --- secure/lib/libcrypto/man/EVP_EncodeInit.3.orig +++ secure/lib/libcrypto/man/EVP_EncodeInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_EncodeInit 3" -.TH EVP_EncodeInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_EncodeInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_EncryptInit.3.orig +++ secure/lib/libcrypto/man/EVP_EncryptInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_EncryptInit 3" -.TH EVP_EncryptInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_EncryptInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_OpenInit.3.orig +++ secure/lib/libcrypto/man/EVP_OpenInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_OpenInit 3" -.TH EVP_OpenInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_OpenInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_CTX_ctrl.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_CTX_ctrl.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_CTX_ctrl 3" -.TH EVP_PKEY_CTX_ctrl 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_CTX_ctrl 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_CTX_new.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_CTX_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_CTX_new 3" -.TH EVP_PKEY_CTX_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_CTX_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_cmp.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_cmp.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_cmp 3" -.TH EVP_PKEY_cmp 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_cmp 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_decrypt.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_decrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_decrypt 3" -.TH EVP_PKEY_decrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_decrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_derive.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_derive.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_derive 3" -.TH EVP_PKEY_derive 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_derive 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_encrypt.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_encrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_encrypt 3" -.TH EVP_PKEY_encrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_encrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_get_default_digest.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_get_default_digest.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_get_default_digest 3" -.TH EVP_PKEY_get_default_digest 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_get_default_digest 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_keygen.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_keygen.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_keygen 3" -.TH EVP_PKEY_keygen 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_keygen 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_new.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_new 3" -.TH EVP_PKEY_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_print_private.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_print_private.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_print_private 3" -.TH EVP_PKEY_print_private 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_print_private 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_set1_RSA.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_set1_RSA.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_set1_RSA 3" -.TH EVP_PKEY_set1_RSA 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_set1_RSA 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_sign.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_sign.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_sign 3" -.TH EVP_PKEY_sign 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_sign 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_verify.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_verify.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_verify 3" -.TH EVP_PKEY_verify 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_verify 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_PKEY_verify_recover.3.orig +++ secure/lib/libcrypto/man/EVP_PKEY_verify_recover.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_PKEY_verify_recover 3" -.TH EVP_PKEY_verify_recover 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_PKEY_verify_recover 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_SealInit.3.orig +++ secure/lib/libcrypto/man/EVP_SealInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_SealInit 3" -.TH EVP_SealInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_SealInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_SignInit.3.orig +++ secure/lib/libcrypto/man/EVP_SignInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_SignInit 3" -.TH EVP_SignInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_SignInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/EVP_VerifyInit.3.orig +++ secure/lib/libcrypto/man/EVP_VerifyInit.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EVP_VerifyInit 3" -.TH EVP_VerifyInit 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EVP_VerifyInit 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OBJ_nid2obj.3.orig +++ secure/lib/libcrypto/man/OBJ_nid2obj.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OBJ_nid2obj 3" -.TH OBJ_nid2obj 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OBJ_nid2obj 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OPENSSL_Applink.3.orig +++ secure/lib/libcrypto/man/OPENSSL_Applink.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OPENSSL_Applink 3" -.TH OPENSSL_Applink 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OPENSSL_Applink 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OPENSSL_VERSION_NUMBER.3.orig +++ secure/lib/libcrypto/man/OPENSSL_VERSION_NUMBER.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OPENSSL_VERSION_NUMBER 3" -.TH OPENSSL_VERSION_NUMBER 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OPENSSL_VERSION_NUMBER 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OPENSSL_config.3.orig +++ secure/lib/libcrypto/man/OPENSSL_config.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OPENSSL_config 3" -.TH OPENSSL_config 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OPENSSL_config 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OPENSSL_ia32cap.3.orig +++ secure/lib/libcrypto/man/OPENSSL_ia32cap.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OPENSSL_ia32cap 3" -.TH OPENSSL_ia32cap 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OPENSSL_ia32cap 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OPENSSL_instrument_bus.3.orig +++ secure/lib/libcrypto/man/OPENSSL_instrument_bus.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OPENSSL_instrument_bus 3" -.TH OPENSSL_instrument_bus 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OPENSSL_instrument_bus 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OPENSSL_load_builtin_modules.3.orig +++ secure/lib/libcrypto/man/OPENSSL_load_builtin_modules.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OPENSSL_load_builtin_modules 3" -.TH OPENSSL_load_builtin_modules 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OPENSSL_load_builtin_modules 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/OpenSSL_add_all_algorithms.3.orig +++ secure/lib/libcrypto/man/OpenSSL_add_all_algorithms.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OpenSSL_add_all_algorithms 3" -.TH OpenSSL_add_all_algorithms 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OpenSSL_add_all_algorithms 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PEM_write_bio_CMS_stream.3.orig +++ secure/lib/libcrypto/man/PEM_write_bio_CMS_stream.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PEM_write_bio_CMS_stream 3" -.TH PEM_write_bio_CMS_stream 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PEM_write_bio_CMS_stream 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PEM_write_bio_PKCS7_stream.3.orig +++ secure/lib/libcrypto/man/PEM_write_bio_PKCS7_stream.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PEM_write_bio_PKCS7_stream 3" -.TH PEM_write_bio_PKCS7_stream 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PEM_write_bio_PKCS7_stream 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PKCS12_create.3.orig +++ secure/lib/libcrypto/man/PKCS12_create.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS12_create 3" -.TH PKCS12_create 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS12_create 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PKCS12_parse.3.orig +++ secure/lib/libcrypto/man/PKCS12_parse.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS12_parse 3" -.TH PKCS12_parse 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS12_parse 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PKCS7_decrypt.3.orig +++ secure/lib/libcrypto/man/PKCS7_decrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS7_decrypt 3" -.TH PKCS7_decrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS7_decrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PKCS7_encrypt.3.orig +++ secure/lib/libcrypto/man/PKCS7_encrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS7_encrypt 3" -.TH PKCS7_encrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS7_encrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PKCS7_sign.3.orig +++ secure/lib/libcrypto/man/PKCS7_sign.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS7_sign 3" -.TH PKCS7_sign 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS7_sign 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PKCS7_sign_add_signer.3.orig +++ secure/lib/libcrypto/man/PKCS7_sign_add_signer.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS7_sign_add_signer 3" -.TH PKCS7_sign_add_signer 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS7_sign_add_signer 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/PKCS7_verify.3.orig +++ secure/lib/libcrypto/man/PKCS7_verify.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS7_verify 3" -.TH PKCS7_verify 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS7_verify 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RAND_add.3.orig +++ secure/lib/libcrypto/man/RAND_add.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RAND_add 3" -.TH RAND_add 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RAND_add 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RAND_bytes.3.orig +++ secure/lib/libcrypto/man/RAND_bytes.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RAND_bytes 3" -.TH RAND_bytes 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RAND_bytes 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RAND_cleanup.3.orig +++ secure/lib/libcrypto/man/RAND_cleanup.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RAND_cleanup 3" -.TH RAND_cleanup 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RAND_cleanup 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RAND_egd.3.orig +++ secure/lib/libcrypto/man/RAND_egd.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RAND_egd 3" -.TH RAND_egd 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RAND_egd 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RAND_load_file.3.orig +++ secure/lib/libcrypto/man/RAND_load_file.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RAND_load_file 3" -.TH RAND_load_file 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RAND_load_file 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RAND_set_rand_method.3.orig +++ secure/lib/libcrypto/man/RAND_set_rand_method.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RAND_set_rand_method 3" -.TH RAND_set_rand_method 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RAND_set_rand_method 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_blinding_on.3.orig +++ secure/lib/libcrypto/man/RSA_blinding_on.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_blinding_on 3" -.TH RSA_blinding_on 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_blinding_on 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_check_key.3.orig +++ secure/lib/libcrypto/man/RSA_check_key.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_check_key 3" -.TH RSA_check_key 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_check_key 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_generate_key.3.orig +++ secure/lib/libcrypto/man/RSA_generate_key.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_generate_key 3" -.TH RSA_generate_key 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_generate_key 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -181,7 +177,7 @@ The process is then repeated for prime q with \fBBN_GENCB_call(cb, 3, 1)\fR. .PP RSA_generate_key is deprecated (new applications should use -RSA_generate_key_ex instead). RSA_generate_key works in the same was as +RSA_generate_key_ex instead). RSA_generate_key works in the same way as RSA_generate_key_ex except it uses \*(L"old style\*(R" call backs. See \&\fIBN_generate_prime\fR\|(3) for further details. .SH "RETURN VALUE" --- secure/lib/libcrypto/man/RSA_get_ex_new_index.3.orig +++ secure/lib/libcrypto/man/RSA_get_ex_new_index.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_get_ex_new_index 3" -.TH RSA_get_ex_new_index 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_get_ex_new_index 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_new.3.orig +++ secure/lib/libcrypto/man/RSA_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_new 3" -.TH RSA_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_padding_add_PKCS1_type_1.3.orig +++ secure/lib/libcrypto/man/RSA_padding_add_PKCS1_type_1.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_padding_add_PKCS1_type_1 3" -.TH RSA_padding_add_PKCS1_type_1 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_padding_add_PKCS1_type_1 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_print.3.orig +++ secure/lib/libcrypto/man/RSA_print.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_print 3" -.TH RSA_print 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_print 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_private_encrypt.3.orig +++ secure/lib/libcrypto/man/RSA_private_encrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_private_encrypt 3" -.TH RSA_private_encrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_private_encrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_public_encrypt.3.orig +++ secure/lib/libcrypto/man/RSA_public_encrypt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_public_encrypt 3" -.TH RSA_public_encrypt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_public_encrypt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_set_method.3.orig +++ secure/lib/libcrypto/man/RSA_set_method.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_set_method 3" -.TH RSA_set_method 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_set_method 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_sign.3.orig +++ secure/lib/libcrypto/man/RSA_sign.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_sign 3" -.TH RSA_sign 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_sign 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_sign_ASN1_OCTET_STRING.3.orig +++ secure/lib/libcrypto/man/RSA_sign_ASN1_OCTET_STRING.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_sign_ASN1_OCTET_STRING 3" -.TH RSA_sign_ASN1_OCTET_STRING 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_sign_ASN1_OCTET_STRING 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/RSA_size.3.orig +++ secure/lib/libcrypto/man/RSA_size.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA_size 3" -.TH RSA_size 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA_size 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/SMIME_read_CMS.3.orig +++ secure/lib/libcrypto/man/SMIME_read_CMS.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SMIME_read_CMS 3" -.TH SMIME_read_CMS 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SMIME_read_CMS 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/SMIME_read_PKCS7.3.orig +++ secure/lib/libcrypto/man/SMIME_read_PKCS7.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SMIME_read_PKCS7 3" -.TH SMIME_read_PKCS7 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SMIME_read_PKCS7 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/SMIME_write_CMS.3.orig +++ secure/lib/libcrypto/man/SMIME_write_CMS.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SMIME_write_CMS 3" -.TH SMIME_write_CMS 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SMIME_write_CMS 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/SMIME_write_PKCS7.3.orig +++ secure/lib/libcrypto/man/SMIME_write_PKCS7.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SMIME_write_PKCS7 3" -.TH SMIME_write_PKCS7 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SMIME_write_PKCS7 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_NAME_ENTRY_get_object.3.orig +++ secure/lib/libcrypto/man/X509_NAME_ENTRY_get_object.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_NAME_ENTRY_get_object 3" -.TH X509_NAME_ENTRY_get_object 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_NAME_ENTRY_get_object 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_NAME_add_entry_by_txt.3.orig +++ secure/lib/libcrypto/man/X509_NAME_add_entry_by_txt.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_NAME_add_entry_by_txt 3" -.TH X509_NAME_add_entry_by_txt 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_NAME_add_entry_by_txt 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_NAME_get_index_by_NID.3.orig +++ secure/lib/libcrypto/man/X509_NAME_get_index_by_NID.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_NAME_get_index_by_NID 3" -.TH X509_NAME_get_index_by_NID 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_NAME_get_index_by_NID 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -221,10 +217,9 @@ Process all commonName entries: .PP .Vb 2 -\& int loc; +\& int lastpos = \-1; \& X509_NAME_ENTRY *e; \& -\& loc = \-1; \& for (;;) \& { \& lastpos = X509_NAME_get_index_by_NID(nm, NID_commonName, lastpos); --- secure/lib/libcrypto/man/X509_NAME_print_ex.3.orig +++ secure/lib/libcrypto/man/X509_NAME_print_ex.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_NAME_print_ex 3" -.TH X509_NAME_print_ex 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_NAME_print_ex 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -160,9 +156,11 @@ \&\fIX509_NAME_print_ex_fp()\fR is identical to \fIX509_NAME_print_ex()\fR except the output is written to \s-1FILE\s0 pointer \fBfp\fR. .PP -\&\fIX509_NAME_oneline()\fR prints an \s-1ASCII\s0 version of \fBa\fR to \fBbuf\fR. At most \fBsize\fR -bytes will be written. If \fBbuf\fR is \fB\s-1NULL\s0\fR then a buffer is dynamically allocated -and returned, otherwise \fBbuf\fR is returned. +\&\fIX509_NAME_oneline()\fR prints an \s-1ASCII\s0 version of \fBa\fR to \fBbuf\fR. +If \fBbuf\fR is \fB\s-1NULL\s0\fR then a buffer is dynamically allocated and returned, and +\&\fBsize\fR is ignored. +Otherwise, at most \fBsize\fR bytes will be written, including the ending '\e0', +and \fBbuf\fR is returned. .PP \&\fIX509_NAME_print()\fR prints out \fBname\fR to \fBbp\fR indenting each line by \fBobase\fR characters. Multiple lines are used if the output (including indent) exceeds --- secure/lib/libcrypto/man/X509_STORE_CTX_get_error.3.orig +++ secure/lib/libcrypto/man/X509_STORE_CTX_get_error.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_STORE_CTX_get_error 3" -.TH X509_STORE_CTX_get_error 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_STORE_CTX_get_error 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_STORE_CTX_get_ex_new_index.3.orig +++ secure/lib/libcrypto/man/X509_STORE_CTX_get_ex_new_index.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_STORE_CTX_get_ex_new_index 3" -.TH X509_STORE_CTX_get_ex_new_index 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_STORE_CTX_get_ex_new_index 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_STORE_CTX_new.3.orig +++ secure/lib/libcrypto/man/X509_STORE_CTX_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_STORE_CTX_new 3" -.TH X509_STORE_CTX_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_STORE_CTX_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_STORE_CTX_set_verify_cb.3.orig +++ secure/lib/libcrypto/man/X509_STORE_CTX_set_verify_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_STORE_CTX_set_verify_cb 3" -.TH X509_STORE_CTX_set_verify_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_STORE_CTX_set_verify_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_STORE_set_verify_cb_func.3.orig +++ secure/lib/libcrypto/man/X509_STORE_set_verify_cb_func.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_STORE_set_verify_cb_func 3" -.TH X509_STORE_set_verify_cb_func 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_STORE_set_verify_cb_func 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_VERIFY_PARAM_set_flags.3.orig +++ secure/lib/libcrypto/man/X509_VERIFY_PARAM_set_flags.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_VERIFY_PARAM_set_flags 3" -.TH X509_VERIFY_PARAM_set_flags 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_VERIFY_PARAM_set_flags 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_check_host.3.orig +++ secure/lib/libcrypto/man/X509_check_host.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_check_host 3" -.TH X509_check_host 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_check_host 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_new.3.orig +++ secure/lib/libcrypto/man/X509_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_new 3" -.TH X509_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/X509_verify_cert.3.orig +++ secure/lib/libcrypto/man/X509_verify_cert.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509_verify_cert 3" -.TH X509_verify_cert 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509_verify_cert 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/bio.3.orig +++ secure/lib/libcrypto/man/bio.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "bio 3" -.TH bio 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH bio 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/blowfish.3.orig +++ secure/lib/libcrypto/man/blowfish.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "blowfish 3" -.TH blowfish 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH blowfish 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/bn.3.orig +++ secure/lib/libcrypto/man/bn.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "bn 3" -.TH bn 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH bn 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/bn_internal.3.orig +++ secure/lib/libcrypto/man/bn_internal.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "bn_internal 3" -.TH bn_internal 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH bn_internal 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/buffer.3.orig +++ secure/lib/libcrypto/man/buffer.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "buffer 3" -.TH buffer 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH buffer 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/crypto.3.orig +++ secure/lib/libcrypto/man/crypto.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "crypto 3" -.TH crypto 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH crypto 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_ASN1_OBJECT.3.orig +++ secure/lib/libcrypto/man/d2i_ASN1_OBJECT.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_ASN1_OBJECT 3" -.TH d2i_ASN1_OBJECT 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_ASN1_OBJECT 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_CMS_ContentInfo.3.orig +++ secure/lib/libcrypto/man/d2i_CMS_ContentInfo.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_CMS_ContentInfo 3" -.TH d2i_CMS_ContentInfo 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_CMS_ContentInfo 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_DHparams.3.orig +++ secure/lib/libcrypto/man/d2i_DHparams.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_DHparams 3" -.TH d2i_DHparams 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_DHparams 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_DSAPublicKey.3.orig +++ secure/lib/libcrypto/man/d2i_DSAPublicKey.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_DSAPublicKey 3" -.TH d2i_DSAPublicKey 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_DSAPublicKey 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_ECPKParameters.3.orig +++ secure/lib/libcrypto/man/d2i_ECPKParameters.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_ECPKParameters 3" -.TH d2i_ECPKParameters 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_ECPKParameters 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_ECPrivateKey.3.orig +++ secure/lib/libcrypto/man/d2i_ECPrivateKey.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_ECPrivateKey 3" -.TH d2i_ECPrivateKey 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_ECPrivateKey 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_PKCS8PrivateKey.3.orig +++ secure/lib/libcrypto/man/d2i_PKCS8PrivateKey.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_PKCS8PrivateKey 3" -.TH d2i_PKCS8PrivateKey 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_PKCS8PrivateKey 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_PrivateKey.3.orig +++ secure/lib/libcrypto/man/d2i_PrivateKey.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_PrivateKey 3" -.TH d2i_PrivateKey 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_PrivateKey 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_RSAPublicKey.3.orig +++ secure/lib/libcrypto/man/d2i_RSAPublicKey.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_RSAPublicKey 3" -.TH d2i_RSAPublicKey 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_RSAPublicKey 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_X509.3.orig +++ secure/lib/libcrypto/man/d2i_X509.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_X509 3" -.TH d2i_X509 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_X509 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_X509_ALGOR.3.orig +++ secure/lib/libcrypto/man/d2i_X509_ALGOR.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_X509_ALGOR 3" -.TH d2i_X509_ALGOR 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_X509_ALGOR 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_X509_CRL.3.orig +++ secure/lib/libcrypto/man/d2i_X509_CRL.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_X509_CRL 3" -.TH d2i_X509_CRL 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_X509_CRL 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_X509_NAME.3.orig +++ secure/lib/libcrypto/man/d2i_X509_NAME.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_X509_NAME 3" -.TH d2i_X509_NAME 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_X509_NAME 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_X509_REQ.3.orig +++ secure/lib/libcrypto/man/d2i_X509_REQ.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_X509_REQ 3" -.TH d2i_X509_REQ 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_X509_REQ 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/d2i_X509_SIG.3.orig +++ secure/lib/libcrypto/man/d2i_X509_SIG.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_X509_SIG 3" -.TH d2i_X509_SIG 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_X509_SIG 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/des.3.orig +++ secure/lib/libcrypto/man/des.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "des 3" -.TH des 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH des 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/dh.3.orig +++ secure/lib/libcrypto/man/dh.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "dh 3" -.TH dh 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH dh 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/dsa.3.orig +++ secure/lib/libcrypto/man/dsa.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "dsa 3" -.TH dsa 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH dsa 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ec.3.orig +++ secure/lib/libcrypto/man/ec.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ec 3" -.TH ec 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ec 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ecdsa.3.orig +++ secure/lib/libcrypto/man/ecdsa.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ecdsa 3" -.TH ecdsa 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ecdsa 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/engine.3.orig +++ secure/lib/libcrypto/man/engine.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "engine 3" -.TH engine 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH engine 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/err.3.orig +++ secure/lib/libcrypto/man/err.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "err 3" -.TH err 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH err 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/evp.3.orig +++ secure/lib/libcrypto/man/evp.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "evp 3" -.TH evp 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH evp 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/hmac.3.orig +++ secure/lib/libcrypto/man/hmac.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "hmac 3" -.TH hmac 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH hmac 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/i2d_CMS_bio_stream.3.orig +++ secure/lib/libcrypto/man/i2d_CMS_bio_stream.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "i2d_CMS_bio_stream 3" -.TH i2d_CMS_bio_stream 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH i2d_CMS_bio_stream 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/i2d_PKCS7_bio_stream.3.orig +++ secure/lib/libcrypto/man/i2d_PKCS7_bio_stream.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "i2d_PKCS7_bio_stream 3" -.TH i2d_PKCS7_bio_stream 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH i2d_PKCS7_bio_stream 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/lh_stats.3.orig +++ secure/lib/libcrypto/man/lh_stats.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "lh_stats 3" -.TH lh_stats 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH lh_stats 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/lhash.3.orig +++ secure/lib/libcrypto/man/lhash.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "lhash 3" -.TH lhash 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH lhash 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/md5.3.orig +++ secure/lib/libcrypto/man/md5.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "md5 3" -.TH md5 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH md5 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/mdc2.3.orig +++ secure/lib/libcrypto/man/mdc2.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "mdc2 3" -.TH mdc2 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH mdc2 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/pem.3.orig +++ secure/lib/libcrypto/man/pem.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "pem 3" -.TH pem 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH pem 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/rand.3.orig +++ secure/lib/libcrypto/man/rand.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "rand 3" -.TH rand 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH rand 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/rc4.3.orig +++ secure/lib/libcrypto/man/rc4.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "rc4 3" -.TH rc4 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH rc4 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ripemd.3.orig +++ secure/lib/libcrypto/man/ripemd.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ripemd 3" -.TH ripemd 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ripemd 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/rsa.3.orig +++ secure/lib/libcrypto/man/rsa.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "rsa 3" -.TH rsa 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH rsa 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/sha.3.orig +++ secure/lib/libcrypto/man/sha.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "sha 3" -.TH sha 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH sha 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/threads.3.orig +++ secure/lib/libcrypto/man/threads.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "threads 3" -.TH threads 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH threads 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ui.3.orig +++ secure/lib/libcrypto/man/ui.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ui 3" -.TH ui 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ui 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/ui_compat.3.orig +++ secure/lib/libcrypto/man/ui_compat.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ui_compat 3" -.TH ui_compat 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ui_compat 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libcrypto/man/x509.3.orig +++ secure/lib/libcrypto/man/x509.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "x509 3" -.TH x509 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH x509 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CIPHER_get_name.3.orig +++ secure/lib/libssl/man/SSL_CIPHER_get_name.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CIPHER_get_name 3" -.TH SSL_CIPHER_get_name 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CIPHER_get_name 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_COMP_add_compression_method.3.orig +++ secure/lib/libssl/man/SSL_COMP_add_compression_method.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_COMP_add_compression_method 3" -.TH SSL_COMP_add_compression_method 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_COMP_add_compression_method 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CONF_CTX_new.3.orig +++ secure/lib/libssl/man/SSL_CONF_CTX_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CONF_CTX_new 3" -.TH SSL_CONF_CTX_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CONF_CTX_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CONF_CTX_set1_prefix.3.orig +++ secure/lib/libssl/man/SSL_CONF_CTX_set1_prefix.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CONF_CTX_set1_prefix 3" -.TH SSL_CONF_CTX_set1_prefix 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CONF_CTX_set1_prefix 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CONF_CTX_set_flags.3.orig +++ secure/lib/libssl/man/SSL_CONF_CTX_set_flags.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CONF_CTX_set_flags 3" -.TH SSL_CONF_CTX_set_flags 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CONF_CTX_set_flags 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CONF_CTX_set_ssl_ctx.3.orig +++ secure/lib/libssl/man/SSL_CONF_CTX_set_ssl_ctx.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CONF_CTX_set_ssl_ctx 3" -.TH SSL_CONF_CTX_set_ssl_ctx 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CONF_CTX_set_ssl_ctx 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CONF_cmd.3.orig +++ secure/lib/libssl/man/SSL_CONF_cmd.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CONF_cmd 3" -.TH SSL_CONF_cmd 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CONF_cmd 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CONF_cmd_argv.3.orig +++ secure/lib/libssl/man/SSL_CONF_cmd_argv.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CONF_cmd_argv 3" -.TH SSL_CONF_cmd_argv 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CONF_cmd_argv 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_add1_chain_cert.3.orig +++ secure/lib/libssl/man/SSL_CTX_add1_chain_cert.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_add1_chain_cert 3" -.TH SSL_CTX_add1_chain_cert 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_add1_chain_cert 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_add_extra_chain_cert.3.orig +++ secure/lib/libssl/man/SSL_CTX_add_extra_chain_cert.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_add_extra_chain_cert 3" -.TH SSL_CTX_add_extra_chain_cert 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_add_extra_chain_cert 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_add_session.3.orig +++ secure/lib/libssl/man/SSL_CTX_add_session.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_add_session 3" -.TH SSL_CTX_add_session 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_add_session 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_ctrl.3.orig +++ secure/lib/libssl/man/SSL_CTX_ctrl.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_ctrl 3" -.TH SSL_CTX_ctrl 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_ctrl 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_flush_sessions.3.orig +++ secure/lib/libssl/man/SSL_CTX_flush_sessions.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_flush_sessions 3" -.TH SSL_CTX_flush_sessions 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_flush_sessions 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_free.3.orig +++ secure/lib/libssl/man/SSL_CTX_free.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_free 3" -.TH SSL_CTX_free 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_free 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_get0_param.3.orig +++ secure/lib/libssl/man/SSL_CTX_get0_param.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_get0_param 3" -.TH SSL_CTX_get0_param 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_get0_param 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_get_ex_new_index.3.orig +++ secure/lib/libssl/man/SSL_CTX_get_ex_new_index.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_get_ex_new_index 3" -.TH SSL_CTX_get_ex_new_index 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_get_ex_new_index 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_get_verify_mode.3.orig +++ secure/lib/libssl/man/SSL_CTX_get_verify_mode.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_get_verify_mode 3" -.TH SSL_CTX_get_verify_mode 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_get_verify_mode 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_load_verify_locations.3.orig +++ secure/lib/libssl/man/SSL_CTX_load_verify_locations.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_load_verify_locations 3" -.TH SSL_CTX_load_verify_locations 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_load_verify_locations 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_new.3.orig +++ secure/lib/libssl/man/SSL_CTX_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_new 3" -.TH SSL_CTX_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_sess_number.3.orig +++ secure/lib/libssl/man/SSL_CTX_sess_number.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_sess_number 3" -.TH SSL_CTX_sess_number 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_sess_number 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_sess_set_cache_size.3.orig +++ secure/lib/libssl/man/SSL_CTX_sess_set_cache_size.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_sess_set_cache_size 3" -.TH SSL_CTX_sess_set_cache_size 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_sess_set_cache_size 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_sess_set_get_cb.3.orig +++ secure/lib/libssl/man/SSL_CTX_sess_set_get_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_sess_set_get_cb 3" -.TH SSL_CTX_sess_set_get_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_sess_set_get_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_sessions.3.orig +++ secure/lib/libssl/man/SSL_CTX_sessions.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_sessions 3" -.TH SSL_CTX_sessions 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_sessions 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set1_curves.3.orig +++ secure/lib/libssl/man/SSL_CTX_set1_curves.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set1_curves 3" -.TH SSL_CTX_set1_curves 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set1_curves 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set1_verify_cert_store.3.orig +++ secure/lib/libssl/man/SSL_CTX_set1_verify_cert_store.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set1_verify_cert_store 3" -.TH SSL_CTX_set1_verify_cert_store 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set1_verify_cert_store 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_alpn_select_cb.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_alpn_select_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_alpn_select_cb 3" -.TH SSL_CTX_set_alpn_select_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_alpn_select_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_cert_cb.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_cert_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_cert_cb 3" -.TH SSL_CTX_set_cert_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_cert_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_cert_store.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_cert_store.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_cert_store 3" -.TH SSL_CTX_set_cert_store 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_cert_store 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_cert_verify_callback.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_cert_verify_callback.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_cert_verify_callback 3" -.TH SSL_CTX_set_cert_verify_callback 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_cert_verify_callback 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_cipher_list.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_cipher_list.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_cipher_list 3" -.TH SSL_CTX_set_cipher_list 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_cipher_list 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_client_CA_list.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_client_CA_list.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_client_CA_list 3" -.TH SSL_CTX_set_client_CA_list 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_client_CA_list 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_client_cert_cb.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_client_cert_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_client_cert_cb 3" -.TH SSL_CTX_set_client_cert_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_client_cert_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_custom_cli_ext.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_custom_cli_ext.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_custom_cli_ext 3" -.TH SSL_CTX_set_custom_cli_ext 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_custom_cli_ext 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_default_passwd_cb.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_default_passwd_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_default_passwd_cb 3" -.TH SSL_CTX_set_default_passwd_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_default_passwd_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_generate_session_id.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_generate_session_id.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_generate_session_id 3" -.TH SSL_CTX_set_generate_session_id 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_generate_session_id 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_info_callback.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_info_callback.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_info_callback 3" -.TH SSL_CTX_set_info_callback 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_info_callback 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_max_cert_list.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_max_cert_list.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_max_cert_list 3" -.TH SSL_CTX_set_max_cert_list 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_max_cert_list 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_mode.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_mode.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_mode 3" -.TH SSL_CTX_set_mode 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_mode 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_msg_callback.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_msg_callback.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_msg_callback 3" -.TH SSL_CTX_set_msg_callback 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_msg_callback 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_options.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_options.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_options 3" -.TH SSL_CTX_set_options 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_options 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_psk_client_callback.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_psk_client_callback.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_psk_client_callback 3" -.TH SSL_CTX_set_psk_client_callback 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_psk_client_callback 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_quiet_shutdown.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_quiet_shutdown.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_quiet_shutdown 3" -.TH SSL_CTX_set_quiet_shutdown 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_quiet_shutdown 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_read_ahead.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_read_ahead.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_read_ahead 3" -.TH SSL_CTX_set_read_ahead 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_read_ahead 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_session_cache_mode.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_session_cache_mode.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_session_cache_mode 3" -.TH SSL_CTX_set_session_cache_mode 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_session_cache_mode 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -166,7 +162,7 @@ agrees to reuse the session or it starts a full handshake (to create a new session). .PP -A server will lookup up the session in its internal session storage. If the +A server will look up the session in its internal session storage. If the session is not found in internal storage or lookups for the internal storage have been deactivated (\s-1SSL_SESS_CACHE_NO_INTERNAL_LOOKUP\s0), the server will try the external storage if available. --- secure/lib/libssl/man/SSL_CTX_set_session_id_context.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_session_id_context.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_session_id_context 3" -.TH SSL_CTX_set_session_id_context 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_session_id_context 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_ssl_version.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_ssl_version.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_ssl_version 3" -.TH SSL_CTX_set_ssl_version 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_ssl_version 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_timeout.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_timeout.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_timeout 3" -.TH SSL_CTX_set_timeout 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_timeout 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_tlsext_status_cb.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_tlsext_status_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_tlsext_status_cb 3" -.TH SSL_CTX_set_tlsext_status_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_tlsext_status_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_tlsext_ticket_key_cb.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_tlsext_ticket_key_cb.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_tlsext_ticket_key_cb 3" -.TH SSL_CTX_set_tlsext_ticket_key_cb 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_tlsext_ticket_key_cb 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_tmp_dh_callback.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_tmp_dh_callback.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_tmp_dh_callback 3" -.TH SSL_CTX_set_tmp_dh_callback 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_tmp_dh_callback 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_tmp_rsa_callback.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_tmp_rsa_callback.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_tmp_rsa_callback 3" -.TH SSL_CTX_set_tmp_rsa_callback 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_tmp_rsa_callback 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_set_verify.3.orig +++ secure/lib/libssl/man/SSL_CTX_set_verify.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_set_verify 3" -.TH SSL_CTX_set_verify 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_set_verify 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_use_certificate.3.orig +++ secure/lib/libssl/man/SSL_CTX_use_certificate.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_use_certificate 3" -.TH SSL_CTX_use_certificate 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_use_certificate 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_use_psk_identity_hint.3.orig +++ secure/lib/libssl/man/SSL_CTX_use_psk_identity_hint.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_use_psk_identity_hint 3" -.TH SSL_CTX_use_psk_identity_hint 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_use_psk_identity_hint 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_CTX_use_serverinfo.3.orig +++ secure/lib/libssl/man/SSL_CTX_use_serverinfo.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_CTX_use_serverinfo 3" -.TH SSL_CTX_use_serverinfo 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_CTX_use_serverinfo 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_SESSION_free.3.orig +++ secure/lib/libssl/man/SSL_SESSION_free.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_SESSION_free 3" -.TH SSL_SESSION_free 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_SESSION_free 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_SESSION_get_ex_new_index.3.orig +++ secure/lib/libssl/man/SSL_SESSION_get_ex_new_index.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_SESSION_get_ex_new_index 3" -.TH SSL_SESSION_get_ex_new_index 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_SESSION_get_ex_new_index 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_SESSION_get_time.3.orig +++ secure/lib/libssl/man/SSL_SESSION_get_time.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_SESSION_get_time 3" -.TH SSL_SESSION_get_time 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_SESSION_get_time 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_accept.3.orig +++ secure/lib/libssl/man/SSL_accept.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_accept 3" -.TH SSL_accept 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_accept 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_alert_type_string.3.orig +++ secure/lib/libssl/man/SSL_alert_type_string.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_alert_type_string 3" -.TH SSL_alert_type_string 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_alert_type_string 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_check_chain.3.orig +++ secure/lib/libssl/man/SSL_check_chain.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_check_chain 3" -.TH SSL_check_chain 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_check_chain 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_clear.3.orig +++ secure/lib/libssl/man/SSL_clear.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_clear 3" -.TH SSL_clear 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_clear 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_connect.3.orig +++ secure/lib/libssl/man/SSL_connect.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_connect 3" -.TH SSL_connect 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_connect 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_do_handshake.3.orig +++ secure/lib/libssl/man/SSL_do_handshake.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_do_handshake 3" -.TH SSL_do_handshake 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_do_handshake 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_free.3.orig +++ secure/lib/libssl/man/SSL_free.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_free 3" -.TH SSL_free 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_free 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_SSL_CTX.3.orig +++ secure/lib/libssl/man/SSL_get_SSL_CTX.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_SSL_CTX 3" -.TH SSL_get_SSL_CTX 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_SSL_CTX 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_ciphers.3.orig +++ secure/lib/libssl/man/SSL_get_ciphers.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_ciphers 3" -.TH SSL_get_ciphers 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_ciphers 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_client_CA_list.3.orig +++ secure/lib/libssl/man/SSL_get_client_CA_list.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_client_CA_list 3" -.TH SSL_get_client_CA_list 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_client_CA_list 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_current_cipher.3.orig +++ secure/lib/libssl/man/SSL_get_current_cipher.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_current_cipher 3" -.TH SSL_get_current_cipher 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_current_cipher 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_default_timeout.3.orig +++ secure/lib/libssl/man/SSL_get_default_timeout.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_default_timeout 3" -.TH SSL_get_default_timeout 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_default_timeout 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_error.3.orig +++ secure/lib/libssl/man/SSL_get_error.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_error 3" -.TH SSL_get_error 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_error 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -170,12 +166,12 @@ if and only if \fBret > 0\fR. .IP "\s-1SSL_ERROR_ZERO_RETURN\s0" 4 .IX Item "SSL_ERROR_ZERO_RETURN" -The \s-1TLS/SSL\s0 connection has been closed. If the protocol version is \s-1SSL 3.0\s0 -or \s-1TLS 1.0,\s0 this result code is returned only if a closure -alert has occurred in the protocol, i.e. if the connection has been -closed cleanly. Note that in this case \fB\s-1SSL_ERROR_ZERO_RETURN\s0\fR -does not necessarily indicate that the underlying transport -has been closed. +The \s-1TLS/SSL\s0 connection has been closed. +If the protocol version is \s-1SSL 3.0\s0 or higher, this result code is returned only +if a closure alert has occurred in the protocol, i.e. if the connection has been +closed cleanly. +Note that in this case \fB\s-1SSL_ERROR_ZERO_RETURN\s0\fR does not necessarily +indicate that the underlying transport has been closed. .IP "\s-1SSL_ERROR_WANT_READ, SSL_ERROR_WANT_WRITE\s0" 4 .IX Item "SSL_ERROR_WANT_READ, SSL_ERROR_WANT_WRITE" The operation did not complete; the same \s-1TLS/SSL I/O\s0 function should be @@ -217,12 +213,9 @@ Details depend on the application. .IP "\s-1SSL_ERROR_SYSCALL\s0" 4 .IX Item "SSL_ERROR_SYSCALL" -Some I/O error occurred. The OpenSSL error queue may contain more -information on the error. If the error queue is empty -(i.e. \fIERR_get_error()\fR returns 0), \fBret\fR can be used to find out more -about the error: If \fBret == 0\fR, an \s-1EOF\s0 was observed that violates -the protocol. If \fBret == \-1\fR, the underlying \fB\s-1BIO\s0\fR reported an -I/O error (for socket I/O on Unix systems, consult \fBerrno\fR for details). +Some non-recoverable I/O error occurred. +The OpenSSL error queue may contain more information on the error. +For socket I/O on Unix systems, consult \fBerrno\fR for details. .IP "\s-1SSL_ERROR_SSL\s0" 4 .IX Item "SSL_ERROR_SSL" A failure in the \s-1SSL\s0 library occurred, usually a protocol error. The --- secure/lib/libssl/man/SSL_get_ex_data_X509_STORE_CTX_idx.3.orig +++ secure/lib/libssl/man/SSL_get_ex_data_X509_STORE_CTX_idx.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_ex_data_X509_STORE_CTX_idx 3" -.TH SSL_get_ex_data_X509_STORE_CTX_idx 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_ex_data_X509_STORE_CTX_idx 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_ex_new_index.3.orig +++ secure/lib/libssl/man/SSL_get_ex_new_index.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_ex_new_index 3" -.TH SSL_get_ex_new_index 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_ex_new_index 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_fd.3.orig +++ secure/lib/libssl/man/SSL_get_fd.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_fd 3" -.TH SSL_get_fd 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_fd 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_peer_cert_chain.3.orig +++ secure/lib/libssl/man/SSL_get_peer_cert_chain.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_peer_cert_chain 3" -.TH SSL_get_peer_cert_chain 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_peer_cert_chain 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_peer_certificate.3.orig +++ secure/lib/libssl/man/SSL_get_peer_certificate.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_peer_certificate 3" -.TH SSL_get_peer_certificate 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_peer_certificate 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_psk_identity.3.orig +++ secure/lib/libssl/man/SSL_get_psk_identity.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_psk_identity 3" -.TH SSL_get_psk_identity 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_psk_identity 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_rbio.3.orig +++ secure/lib/libssl/man/SSL_get_rbio.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_rbio 3" -.TH SSL_get_rbio 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_rbio 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_session.3.orig +++ secure/lib/libssl/man/SSL_get_session.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_session 3" -.TH SSL_get_session 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_session 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_verify_result.3.orig +++ secure/lib/libssl/man/SSL_get_verify_result.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_verify_result 3" -.TH SSL_get_verify_result 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_verify_result 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_get_version.3.orig +++ secure/lib/libssl/man/SSL_get_version.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_get_version 3" -.TH SSL_get_version 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_get_version 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_library_init.3.orig +++ secure/lib/libssl/man/SSL_library_init.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_library_init 3" -.TH SSL_library_init 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_library_init 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_load_client_CA_file.3.orig +++ secure/lib/libssl/man/SSL_load_client_CA_file.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_load_client_CA_file 3" -.TH SSL_load_client_CA_file 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_load_client_CA_file 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_new.3.orig +++ secure/lib/libssl/man/SSL_new.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_new 3" -.TH SSL_new 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_new 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_pending.3.orig +++ secure/lib/libssl/man/SSL_pending.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_pending 3" -.TH SSL_pending 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_pending 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_read.3.orig +++ secure/lib/libssl/man/SSL_read.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_read 3" -.TH SSL_read 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_read 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -212,30 +208,29 @@ .SH "RETURN VALUES" .IX Header "RETURN VALUES" The following return values can occur: -.IP ">0" 4 -.IX Item ">0" -The read operation was successful; the return value is the number of -bytes actually read from the \s-1TLS/SSL\s0 connection. -.IP "0" 4 -The read operation was not successful. The reason may either be a clean -shutdown due to a \*(L"close notify\*(R" alert sent by the peer (in which case -the \s-1SSL_RECEIVED_SHUTDOWN\s0 flag in the ssl shutdown state is set -(see \fISSL_shutdown\fR\|(3), -\&\fISSL_set_shutdown\fR\|(3)). It is also possible, that -the peer simply shut down the underlying transport and the shutdown is -incomplete. Call \fISSL_get_error()\fR with the return value \fBret\fR to find out, -whether an error occurred or the connection was shut down cleanly -(\s-1SSL_ERROR_ZERO_RETURN\s0). +.IP "> 0" 4 +.IX Item "> 0" +The read operation was successful. +The return value is the number of bytes actually read from the \s-1TLS/SSL\s0 +connection. +.IP "<= 0" 4 +.IX Item "<= 0" +.PD 0 +.IP "<0" 4 +.IX Item "<0" +.PD +The read operation was not successful, because either the connection was closed, +an error occurred or action must be taken by the calling process. +Call \fISSL_get_error\fR\|(3) with the return value \fBret\fR to find out the reason. .Sp SSLv2 (deprecated) does not support a shutdown alert protocol, so it can only be detected, whether the underlying connection was closed. It cannot be checked, whether the closure was initiated by the peer or by something else. -.IP "<0" 4 -.IX Item "<0" -The read operation was not successful, because either an error occurred -or action must be taken by the calling process. Call \fISSL_get_error()\fR with the -return value \fBret\fR to find out the reason. +.Sp +Old documentation indicated a difference between 0 and \-1, and that \-1 was +retryable. +You should instead call \fISSL_get_error()\fR to find out if it's retryable. .SH "SEE ALSO" .IX Header "SEE ALSO" \&\fISSL_get_error\fR\|(3), \fISSL_write\fR\|(3), --- secure/lib/libssl/man/SSL_rstate_string.3.orig +++ secure/lib/libssl/man/SSL_rstate_string.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_rstate_string 3" -.TH SSL_rstate_string 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_rstate_string 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_session_reused.3.orig +++ secure/lib/libssl/man/SSL_session_reused.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_session_reused 3" -.TH SSL_session_reused 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_session_reused 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_set_bio.3.orig +++ secure/lib/libssl/man/SSL_set_bio.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_set_bio 3" -.TH SSL_set_bio 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_set_bio 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_set_connect_state.3.orig +++ secure/lib/libssl/man/SSL_set_connect_state.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_set_connect_state 3" -.TH SSL_set_connect_state 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_set_connect_state 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_set_fd.3.orig +++ secure/lib/libssl/man/SSL_set_fd.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_set_fd 3" -.TH SSL_set_fd 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_set_fd 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_set_session.3.orig +++ secure/lib/libssl/man/SSL_set_session.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_set_session 3" -.TH SSL_set_session 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_set_session 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_set_shutdown.3.orig +++ secure/lib/libssl/man/SSL_set_shutdown.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_set_shutdown 3" -.TH SSL_set_shutdown 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_set_shutdown 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_set_verify_result.3.orig +++ secure/lib/libssl/man/SSL_set_verify_result.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_set_verify_result 3" -.TH SSL_set_verify_result 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_set_verify_result 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_shutdown.3.orig +++ secure/lib/libssl/man/SSL_shutdown.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_shutdown 3" -.TH SSL_shutdown 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_shutdown 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_state_string.3.orig +++ secure/lib/libssl/man/SSL_state_string.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_state_string 3" -.TH SSL_state_string 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_state_string 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_want.3.orig +++ secure/lib/libssl/man/SSL_want.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_want 3" -.TH SSL_want 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_want 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/SSL_write.3.orig +++ secure/lib/libssl/man/SSL_write.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SSL_write 3" -.TH SSL_write 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SSL_write 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -205,24 +201,23 @@ .SH "RETURN VALUES" .IX Header "RETURN VALUES" The following return values can occur: -.IP ">0" 4 -.IX Item ">0" +.IP "> 0" 4 +.IX Item "> 0" The write operation was successful, the return value is the number of bytes actually written to the \s-1TLS/SSL\s0 connection. -.IP "0" 4 -The write operation was not successful. Probably the underlying connection -was closed. Call \fISSL_get_error()\fR with the return value \fBret\fR to find out, -whether an error occurred or the connection was shut down cleanly -(\s-1SSL_ERROR_ZERO_RETURN\s0). +.IP "<= 0" 4 +.IX Item "<= 0" +The write operation was not successful, because either the connection was +closed, an error occurred or action must be taken by the calling process. +Call \fISSL_get_error()\fR with the return value \fBret\fR to find out the reason. .Sp SSLv2 (deprecated) does not support a shutdown alert protocol, so it can only be detected, whether the underlying connection was closed. It cannot be checked, why the closure happened. -.IP "<0" 4 -.IX Item "<0" -The write operation was not successful, because either an error occurred -or action must be taken by the calling process. Call \fISSL_get_error()\fR with the -return value \fBret\fR to find out the reason. +.Sp +Old documentation indicated a difference between 0 and \-1, and that \-1 was +retryable. +You should instead call \fISSL_get_error()\fR to find out if it's retryable. .SH "SEE ALSO" .IX Header "SEE ALSO" \&\fISSL_get_error\fR\|(3), \fISSL_read\fR\|(3), --- secure/lib/libssl/man/d2i_SSL_SESSION.3.orig +++ secure/lib/libssl/man/d2i_SSL_SESSION.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "d2i_SSL_SESSION 3" -.TH d2i_SSL_SESSION 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH d2i_SSL_SESSION 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/lib/libssl/man/ssl.3.orig +++ secure/lib/libssl/man/ssl.3 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ssl 3" -.TH ssl 3 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ssl 3 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/CA.pl.1.orig +++ secure/usr.bin/openssl/man/CA.pl.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CA.PL 1" -.TH CA.PL 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CA.PL 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/asn1parse.1.orig +++ secure/usr.bin/openssl/man/asn1parse.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ASN1PARSE 1" -.TH ASN1PARSE 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ASN1PARSE 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/c_rehash.1.orig +++ secure/usr.bin/openssl/man/c_rehash.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "C_REHASH 1" -.TH C_REHASH 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH C_REHASH 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/ca.1.orig +++ secure/usr.bin/openssl/man/ca.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CA 1" -.TH CA 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CA 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/ciphers.1.orig +++ secure/usr.bin/openssl/man/ciphers.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CIPHERS 1" -.TH CIPHERS 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CIPHERS 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/cms.1.orig +++ secure/usr.bin/openssl/man/cms.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CMS 1" -.TH CMS 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CMS 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/crl.1.orig +++ secure/usr.bin/openssl/man/crl.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CRL 1" -.TH CRL 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CRL 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/crl2pkcs7.1.orig +++ secure/usr.bin/openssl/man/crl2pkcs7.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "CRL2PKCS7 1" -.TH CRL2PKCS7 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH CRL2PKCS7 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/dgst.1.orig +++ secure/usr.bin/openssl/man/dgst.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DGST 1" -.TH DGST 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DGST 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/dhparam.1.orig +++ secure/usr.bin/openssl/man/dhparam.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DHPARAM 1" -.TH DHPARAM 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DHPARAM 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/dsa.1.orig +++ secure/usr.bin/openssl/man/dsa.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSA 1" -.TH DSA 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSA 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/dsaparam.1.orig +++ secure/usr.bin/openssl/man/dsaparam.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "DSAPARAM 1" -.TH DSAPARAM 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH DSAPARAM 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/ec.1.orig +++ secure/usr.bin/openssl/man/ec.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "EC 1" -.TH EC 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH EC 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/ecparam.1.orig +++ secure/usr.bin/openssl/man/ecparam.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ECPARAM 1" -.TH ECPARAM 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ECPARAM 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/enc.1.orig +++ secure/usr.bin/openssl/man/enc.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ENC 1" -.TH ENC 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ENC 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/errstr.1.orig +++ secure/usr.bin/openssl/man/errstr.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "ERRSTR 1" -.TH ERRSTR 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH ERRSTR 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/gendsa.1.orig +++ secure/usr.bin/openssl/man/gendsa.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "GENDSA 1" -.TH GENDSA 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH GENDSA 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/genpkey.1.orig +++ secure/usr.bin/openssl/man/genpkey.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "GENPKEY 1" -.TH GENPKEY 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH GENPKEY 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/genrsa.1.orig +++ secure/usr.bin/openssl/man/genrsa.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "GENRSA 1" -.TH GENRSA 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH GENRSA 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/nseq.1.orig +++ secure/usr.bin/openssl/man/nseq.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "NSEQ 1" -.TH NSEQ 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH NSEQ 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/ocsp.1.orig +++ secure/usr.bin/openssl/man/ocsp.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OCSP 1" -.TH OCSP 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OCSP 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l @@ -162,6 +158,7 @@ [\fB\-no_nonce\fR] [\fB\-url \s-1URL\s0\fR] [\fB\-host host:n\fR] +[\fB\-header name value\fR] [\fB\-path\fR] [\fB\-CApath dir\fR] [\fB\-CAfile file\fR] @@ -255,6 +252,13 @@ if the \fBhost\fR option is present then the \s-1OCSP\s0 request is sent to the host \&\fBhostname\fR on port \fBport\fR. \fBpath\fR specifies the \s-1HTTP\s0 path name to use or \*(L"/\*(R" by default. +.IP "\fB\-header name value\fR" 4 +.IX Item "-header name value" +If sending a request to an \s-1OCSP\s0 server, then the specified header name and +value are added to the \s-1HTTP\s0 request. Note that the \fBname\fR and \fBvalue\fR must +be specified as two separate parameters, not as a single quoted string, and +that the header name does not have the trailing colon. +Some \s-1OCSP\s0 responders require a Host header; use this flag to provide it. .IP "\fB\-timeout seconds\fR" 4 .IX Item "-timeout seconds" connection timeout to the \s-1OCSP\s0 responder in seconds --- secure/usr.bin/openssl/man/openssl.1.orig +++ secure/usr.bin/openssl/man/openssl.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "OPENSSL 1" -.TH OPENSSL 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH OPENSSL 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/passwd.1.orig +++ secure/usr.bin/openssl/man/passwd.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PASSWD 1" -.TH PASSWD 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PASSWD 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/pkcs12.1.orig +++ secure/usr.bin/openssl/man/pkcs12.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS12 1" -.TH PKCS12 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS12 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/pkcs7.1.orig +++ secure/usr.bin/openssl/man/pkcs7.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS7 1" -.TH PKCS7 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS7 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/pkcs8.1.orig +++ secure/usr.bin/openssl/man/pkcs8.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKCS8 1" -.TH PKCS8 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKCS8 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/pkey.1.orig +++ secure/usr.bin/openssl/man/pkey.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKEY 1" -.TH PKEY 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKEY 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/pkeyparam.1.orig +++ secure/usr.bin/openssl/man/pkeyparam.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKEYPARAM 1" -.TH PKEYPARAM 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKEYPARAM 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/pkeyutl.1.orig +++ secure/usr.bin/openssl/man/pkeyutl.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "PKEYUTL 1" -.TH PKEYUTL 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH PKEYUTL 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/rand.1.orig +++ secure/usr.bin/openssl/man/rand.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RAND 1" -.TH RAND 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RAND 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/req.1.orig +++ secure/usr.bin/openssl/man/req.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "REQ 1" -.TH REQ 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH REQ 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/rsa.1.orig +++ secure/usr.bin/openssl/man/rsa.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSA 1" -.TH RSA 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSA 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/rsautl.1.orig +++ secure/usr.bin/openssl/man/rsautl.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "RSAUTL 1" -.TH RSAUTL 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH RSAUTL 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/s_client.1.orig +++ secure/usr.bin/openssl/man/s_client.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "S_CLIENT 1" -.TH S_CLIENT 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH S_CLIENT 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/s_server.1.orig +++ secure/usr.bin/openssl/man/s_server.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "S_SERVER 1" -.TH S_SERVER 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH S_SERVER 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/s_time.1.orig +++ secure/usr.bin/openssl/man/s_time.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "S_TIME 1" -.TH S_TIME 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH S_TIME 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/sess_id.1.orig +++ secure/usr.bin/openssl/man/sess_id.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SESS_ID 1" -.TH SESS_ID 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SESS_ID 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/smime.1.orig +++ secure/usr.bin/openssl/man/smime.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SMIME 1" -.TH SMIME 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SMIME 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/speed.1.orig +++ secure/usr.bin/openssl/man/speed.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SPEED 1" -.TH SPEED 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SPEED 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/spkac.1.orig +++ secure/usr.bin/openssl/man/spkac.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "SPKAC 1" -.TH SPKAC 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH SPKAC 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/ts.1.orig +++ secure/usr.bin/openssl/man/ts.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "TS 1" -.TH TS 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH TS 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/tsget.1.orig +++ secure/usr.bin/openssl/man/tsget.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "TSGET 1" -.TH TSGET 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH TSGET 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/verify.1.orig +++ secure/usr.bin/openssl/man/verify.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "VERIFY 1" -.TH VERIFY 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH VERIFY 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/version.1.orig +++ secure/usr.bin/openssl/man/version.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "VERSION 1" -.TH VERSION 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH VERSION 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/x509.1.orig +++ secure/usr.bin/openssl/man/x509.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509 1" -.TH X509 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l --- secure/usr.bin/openssl/man/x509v3_config.1.orig +++ secure/usr.bin/openssl/man/x509v3_config.1 @@ -1,4 +1,4 @@ -.\" Automatically generated by Pod::Man 2.28 (Pod::Simple 3.28) +.\" Automatically generated by Pod::Man 4.07 (Pod::Simple 3.35) .\" .\" Standard preamble: .\" ======================================================================== @@ -46,7 +46,7 @@ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" -.\" If the F register is turned on, we'll generate index entries on stderr for +.\" If the F register is >0, we'll generate index entries on stderr for .\" titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index .\" entries marked with X<> in POD. Of course, you'll have to process the .\" output yourself in some meaningful fashion. @@ -54,20 +54,16 @@ .\" Avoid warning from groff about undefined register 'F'. .de IX .. -.nr rF 0 -.if \n(.g .if rF .nr rF 1 -.if (\n(rF:(\n(.g==0)) \{ -. if \nF \{ -. de IX -. tm Index:\\$1\t\\n%\t"\\$2" +.if !\nF .nr F 0 +.if \nF>0 \{\ +. de IX +. tm Index:\\$1\t\\n%\t"\\$2" .. -. if !\nF==2 \{ -. nr % 0 -. nr F 2 -. \} +. if !\nF==2 \{\ +. nr % 0 +. nr F 2 . \} .\} -.rr rF .\" .\" Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2). .\" Fear. Run. Save yourself. No user-serviceable parts. @@ -133,7 +129,7 @@ .\" ======================================================================== .\" .IX Title "X509V3_CONFIG 1" -.TH X509V3_CONFIG 1 "2016-09-26" "1.0.2j" "OpenSSL" +.TH X509V3_CONFIG 1 "2017-01-26" "1.0.2k" "OpenSSL" .\" For nroff, turn off justification. Always turn off hyphenation; it makes .\" way too many mistakes in technical documents. .if n .ad l