--- contrib/sqlite3/Makefile.am.orig +++ contrib/sqlite3/Makefile.am @@ -1,6 +1,5 @@ -AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ @SESSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE - +AM_CFLAGS = @BUILD_CFLAGS@ lib_LTLIBRARIES = libsqlite3.la libsqlite3_la_SOURCES = sqlite3.c libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8 @@ -10,11 +9,11 @@ EXTRA_sqlite3_SOURCES = sqlite3.c sqlite3_LDADD = @EXTRA_SHELL_OBJ@ @READLINE_LIBS@ sqlite3_DEPENDENCIES = @EXTRA_SHELL_OBJ@ -sqlite3_CFLAGS = $(AM_CFLAGS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS +sqlite3_CFLAGS = $(AM_CFLAGS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_ENABLE_STMTVTAB -DSQLITE_ENABLE_DBSTAT_VTAB $(SHELL_CFLAGS) include_HEADERS = sqlite3.h sqlite3ext.h -EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs +EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs Makefile.fallback pkgconfigdir = ${libdir}/pkgconfig pkgconfig_DATA = sqlite3.pc --- contrib/sqlite3/Makefile.fallback.orig +++ contrib/sqlite3/Makefile.fallback @@ -0,0 +1,19 @@ +#!/usr/bin/make +# +# If the configure script does not work, then this Makefile is available +# as a backup. Manually configure the variables below. +# +# Note: This makefile works out-of-the-box on MacOS 10.2 (Jaguar) +# +CC = gcc +CFLAGS = -O0 -I. +LIBS = -lz +COPTS += -D_BSD_SOURCE +COPTS += -DSQLITE_ENABLE_LOCKING_STYLE=0 +COPTS += -DSQLITE_THREADSAFE=0 +COPTS += -DSQLITE_OMIT_LOAD_EXTENSION +COPTS += -DSQLITE_WITHOUT_ZONEMALLOC +COPTS += -DSQLITE_ENABLE_RTREE + +sqlite3: shell.c sqlite3.c + $(CC) $(CFLAGS) $(COPTS) -o sqlite3 shell.c sqlite3.c $(LIBS) --- contrib/sqlite3/Makefile.in.orig +++ contrib/sqlite3/Makefile.in @@ -260,7 +260,6 @@ DLLTOOL = @DLLTOOL@ DSYMUTIL = @DSYMUTIL@ DUMPBIN = @DUMPBIN@ -DYNAMIC_EXTENSION_FLAGS = @DYNAMIC_EXTENSION_FLAGS@ ECHO_C = @ECHO_C@ ECHO_N = @ECHO_N@ ECHO_T = @ECHO_T@ @@ -268,7 +267,6 @@ EXEEXT = @EXEEXT@ EXTRA_SHELL_OBJ = @EXTRA_SHELL_OBJ@ FGREP = @FGREP@ -FTS5_FLAGS = @FTS5_FLAGS@ GREP = @GREP@ INSTALL = @INSTALL@ INSTALL_DATA = @INSTALL_DATA@ @@ -275,7 +273,6 @@ INSTALL_PROGRAM = @INSTALL_PROGRAM@ INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -JSON1_FLAGS = @JSON1_FLAGS@ LD = @LD@ LDFLAGS = @LDFLAGS@ LIBOBJS = @LIBOBJS@ @@ -305,11 +302,10 @@ RANLIB = @RANLIB@ READLINE_LIBS = @READLINE_LIBS@ SED = @SED@ -SESSION_FLAGS = @SESSION_FLAGS@ SET_MAKE = @SET_MAKE@ SHELL = @SHELL@ +SHELL_CFLAGS = @SHELL_CFLAGS@ STRIP = @STRIP@ -THREADSAFE_FLAGS = @THREADSAFE_FLAGS@ VERSION = @VERSION@ abs_builddir = @abs_builddir@ abs_srcdir = @abs_srcdir@ @@ -363,7 +359,7 @@ top_build_prefix = @top_build_prefix@ top_builddir = @top_builddir@ top_srcdir = @top_srcdir@ -AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ @FTS5_FLAGS@ @JSON1_FLAGS@ @SESSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE +AM_CFLAGS = @BUILD_CFLAGS@ lib_LTLIBRARIES = libsqlite3.la libsqlite3_la_SOURCES = sqlite3.c libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8 @@ -371,9 +367,9 @@ EXTRA_sqlite3_SOURCES = sqlite3.c sqlite3_LDADD = @EXTRA_SHELL_OBJ@ @READLINE_LIBS@ sqlite3_DEPENDENCIES = @EXTRA_SHELL_OBJ@ -sqlite3_CFLAGS = $(AM_CFLAGS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS +sqlite3_CFLAGS = $(AM_CFLAGS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_DBPAGE_VTAB -DSQLITE_ENABLE_STMTVTAB -DSQLITE_ENABLE_DBSTAT_VTAB $(SHELL_CFLAGS) include_HEADERS = sqlite3.h sqlite3ext.h -EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs +EXTRA_DIST = sqlite3.1 tea Makefile.msc sqlite3.rc README.txt Replace.cs Makefile.fallback pkgconfigdir = ${libdir}/pkgconfig pkgconfig_DATA = sqlite3.pc man_MANS = sqlite3.1 --- contrib/sqlite3/Makefile.msc.orig +++ contrib/sqlite3/Makefile.msc @@ -277,6 +277,12 @@ !IF $(MINIMAL_AMALGAMATION)==0 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_FTS3=1 OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_RTREE=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_GEOPOLY=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_JSON1=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_STMTVTAB=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBPAGE_VTAB=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_DBSTAT_VTAB=1 +OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_INTROSPECTION_PRAGMAS=1 !ENDIF OPT_FEATURE_FLAGS = $(OPT_FEATURE_FLAGS) -DSQLITE_ENABLE_COLUMN_METADATA=1 !ENDIF @@ -561,6 +567,7 @@ !ENDIF !ENDIF + # This is the core library that the shell executable should link with. # !IFNDEF SHELL_CORE_LIB @@ -808,7 +815,7 @@ # If requested, link to the RPCRT4 library. # !IF $(USE_RPCRT4_LIB)!=0 -LTLINK = $(LTLINK) rpcrt4.lib +LTLIBS = $(LTLIBS) rpcrt4.lib !ENDIF # If a platform was set, force the linker to target that. @@ -927,7 +934,9 @@ # when the shell is not being dynamically linked. # !IF $(DYNAMIC_SHELL)==0 && $(FOR_WIN10)==0 -SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_SHELL_JSON1 -DSQLITE_ENABLE_FTS4 -DSQLITE_ENABLE_EXPLAIN_COMMENTS -DSQLITE_ENABLE_STMTVTAB +SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_FTS4=1 +SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_EXPLAIN_COMMENTS=1 +SHELL_COMPILE_OPTS = $(SHELL_COMPILE_OPTS) -DSQLITE_ENABLE_OFFSET_SQL_FUNC=1 !ENDIF @@ -934,8 +943,16 @@ # This is the default Makefile target. The objects listed here # are what get build when you type just "make" with no arguments. # -all: dll shell +core: dll shell +# Targets that require the Tcl library. +# +tcl: $(ALL_TCL_TARGETS) + +# This Makefile target builds all of the standard binaries. +# +all: core tcl + # Dynamic link library section. # dll: $(SQLITE3DLL) @@ -954,11 +971,11 @@ sqlite3.def: Replace.exe $(LIBOBJ) echo EXPORTS > sqlite3.def dumpbin /all $(LIBOBJ) \ - | .\Replace.exe "^\s+/EXPORT:_?(sqlite3(?:session|changeset|changegroup)?_[^@,]*)(?:@\d+|,DATA)?$$" $$1 true \ + | .\Replace.exe "^\s+/EXPORT:_?(sqlite3(?:session|changeset|changegroup|rebaser)?_[^@,]*)(?:@\d+|,DATA)?$$" $$1 true \ | sort >> sqlite3.def -$(SQLITE3EXE): $(TOP)\shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H) - $(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) $(TOP)\shell.c $(SHELL_CORE_SRC) \ +$(SQLITE3EXE): shell.c $(SHELL_CORE_DEP) $(LIBRESOBJS) $(SHELL_CORE_SRC) $(SQLITE3H) + $(LTLINK) $(SHELL_COMPILE_OPTS) $(READLINE_FLAGS) shell.c $(SHELL_CORE_SRC) \ /link $(SQLITE3EXEPDB) $(LDFLAGS) $(LTLINKOPTS) $(SHELL_LINK_OPTS) $(LTLIBPATHS) $(LIBRESOBJS) $(LIBREADLINE) $(LTLIBS) $(TLIBS) @@ -973,7 +990,7 @@ !IF $(USE_RC)!=0 _HASHCHAR=^# !IF ![echo !IFNDEF VERSION > rcver.vc] && \ - ![for /F "delims=" %V in ('type "$(SQLITE3H)" ^| find "$(_HASHCHAR)define SQLITE_VERSION "') do (echo VERSION = ^^%V >> rcver.vc)] && \ + ![for /F "delims=" %V in ('type "$(SQLITE3H)" ^| "%SystemRoot%\System32\find.exe" "$(_HASHCHAR)define SQLITE_VERSION "') do (echo VERSION = ^^%V >> rcver.vc)] && \ ![echo !ENDIF >> rcver.vc] !INCLUDE rcver.vc !ENDIF --- contrib/sqlite3/configure.orig +++ contrib/sqlite3/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for sqlite 3.20.0. +# Generated by GNU Autoconf 2.69 for sqlite 3.26.0. # # Report bugs to . # @@ -590,8 +590,8 @@ # Identity of this package. PACKAGE_NAME='sqlite' PACKAGE_TARNAME='sqlite' -PACKAGE_VERSION='3.20.0' -PACKAGE_STRING='sqlite 3.20.0' +PACKAGE_VERSION='3.26.0' +PACKAGE_STRING='sqlite 3.26.0' PACKAGE_BUGREPORT='http://www.sqlite.org' PACKAGE_URL='' @@ -636,12 +636,8 @@ am__EXEEXT_TRUE LTLIBOBJS LIBOBJS +SHELL_CFLAGS EXTRA_SHELL_OBJ -SESSION_FLAGS -JSON1_FLAGS -FTS5_FLAGS -DYNAMIC_EXTENSION_FLAGS -THREADSAFE_FLAGS READLINE_LIBS BUILD_CFLAGS CPP @@ -775,9 +771,13 @@ enable_readline enable_threadsafe enable_dynamic_extensions +enable_fts4 +enable_fts3 enable_fts5 enable_json1 +enable_rtree enable_session +enable_debug enable_static_shell ' ac_precious_vars='build_alias @@ -1330,7 +1330,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures sqlite 3.20.0 to adapt to many kinds of systems. +\`configure' configures sqlite 3.26.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1400,7 +1400,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of sqlite 3.20.0:";; + short | recursive ) echo "Configuration of sqlite 3.26.0:";; esac cat <<\_ACEOF @@ -1425,9 +1425,13 @@ --enable-threadsafe build a thread-safe library [default=yes] --enable-dynamic-extensions support loadable extensions [default=yes] - --enable-fts5 include fts5 support [default=no] - --enable-json1 include json1 support [default=no] + --enable-fts4 include fts4 support [default=yes] + --enable-fts3 include fts3 support [default=no] + --enable-fts5 include fts5 support [default=yes] + --enable-json1 include json1 support [default=yes] + --enable-rtree include rtree support [default=yes] --enable-session enable the session extension [default=no] + --enable-debug build with debugging features enabled [default=no] --enable-static-shell statically link libsqlite3 into shell tool [default=yes] @@ -1521,7 +1525,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -sqlite configure 3.20.0 +sqlite configure 3.26.0 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1936,7 +1940,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by sqlite $as_me 3.20.0, which was +It was created by sqlite $as_me 3.26.0, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -2285,12 +2289,8 @@ - -# Use automake. -am__api_version='1.15' - ac_aux_dir= -for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do +for ac_dir in . "$srcdir"/.; do if test -f "$ac_dir/install-sh"; then ac_aux_dir=$ac_dir ac_install_sh="$ac_aux_dir/install-sh -c" @@ -2306,7 +2306,7 @@ fi done if test -z "$ac_aux_dir"; then - as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5 + as_fn_error $? "cannot find install-sh, install.sh, or shtool in . \"$srcdir\"/." "$LINENO" 5 fi # These three variables are undocumented and unsupported, @@ -2318,6 +2318,10 @@ ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + +# Use automake. +am__api_version='1.15' + # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -2802,7 +2806,7 @@ # Define the identity of the package. PACKAGE='sqlite' - VERSION='3.20.0' + VERSION='3.26.0' cat >>confdefs.h <<_ACEOF @@ -13038,6 +13042,7 @@ ac_config_files="$ac_config_files Makefile sqlite3.pc" +BUILD_CFLAGS= #------------------------------------------------------------------------- @@ -13302,9 +13307,8 @@ enable_threadsafe=yes fi -THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0 if test x"$enable_threadsafe" != "xno"; then - THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1" + BUILD_CFLAGS="$BUILD_CFLAGS -D_REENTRANT=1 -DSQLITE_THREADSAFE=1" { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing pthread_create" >&5 $as_echo_n "checking for library containing pthread_create... " >&6; } if ${ac_cv_search_pthread_create+:} false; then : @@ -13418,7 +13422,6 @@ fi fi - #----------------------------------------------------------------------- #----------------------------------------------------------------------- @@ -13489,16 +13492,43 @@ fi else - DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1 + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_OMIT_LOAD_EXTENSION=1" fi { $as_echo "$as_me:${as_lineno-$LINENO}: checking for whether to support dynamic extensions" >&5 $as_echo_n "checking for whether to support dynamic extensions... " >&6; } { $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_dynamic_extensions" >&5 $as_echo "$enable_dynamic_extensions" >&6; } +#----------------------------------------------------------------------- #----------------------------------------------------------------------- +# --enable-fts4 +# +# Check whether --enable-fts4 was given. +if test "${enable_fts4+set}" = set; then : + enableval=$enable_fts4; +else + enable_fts4=yes +fi +if test x"$enable_fts4" = "xyes"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS4" +fi #----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# --enable-fts3 +# +# Check whether --enable-fts3 was given. +if test "${enable_fts3+set}" = set; then : + enableval=$enable_fts3; +fi + +if test x"$enable_fts3" = "xyes" -a x"$enable_fts4" = "xno"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS3" +fi +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- # --enable-fts5 # # Check whether --enable-fts5 was given. @@ -13505,7 +13535,7 @@ if test "${enable_fts5+set}" = set; then : enableval=$enable_fts5; else - enable_fts5=no + enable_fts5=yes fi if test x"$enable_fts5" = "xyes"; then @@ -13565,9 +13595,8 @@ fi - FTS5_FLAGS=-DSQLITE_ENABLE_FTS5 + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS5" fi - #----------------------------------------------------------------------- #----------------------------------------------------------------------- @@ -13577,32 +13606,57 @@ if test "${enable_json1+set}" = set; then : enableval=$enable_json1; else - enable_json1=no + enable_json1=yes fi if test x"$enable_json1" = "xyes"; then - JSON1_FLAGS=-DSQLITE_ENABLE_JSON1 + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_JSON1" fi +#----------------------------------------------------------------------- #----------------------------------------------------------------------- +# --enable-rtree +# +# Check whether --enable-rtree was given. +if test "${enable_rtree+set}" = set; then : + enableval=$enable_rtree; +else + enable_rtree=yes +fi +if test x"$enable_rtree" = "xyes"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_RTREE" +fi #----------------------------------------------------------------------- + +#----------------------------------------------------------------------- # --enable-session # # Check whether --enable-session was given. if test "${enable_session+set}" = set; then : enableval=$enable_session; -else - enable_session=no fi if test x"$enable_session" = "xyes"; then - SESSION_FLAGS="-DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK" + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK" fi +#----------------------------------------------------------------------- #----------------------------------------------------------------------- +# --enable-debug +# +# Check whether --enable-debug was given. +if test "${enable_debug+set}" = set; then : + enableval=$enable_debug; +fi +if test x"$enable_debug" = "xyes"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_DEBUG -DSQLITE_ENABLE_SELECTTRACE -DSQLITE_ENABLE_WHERETRACE" + CFLAGS="-g -O0" +fi #----------------------------------------------------------------------- + +#----------------------------------------------------------------------- # --enable-static-shell # # Check whether --enable-static-shell was given. @@ -13631,7 +13685,136 @@ fi done +for ac_header in zlib.h +do : + ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default" +if test "x$ac_cv_header_zlib_h" = xyes; then : + cat >>confdefs.h <<_ACEOF +#define HAVE_ZLIB_H 1 +_ACEOF + { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing deflate" >&5 +$as_echo_n "checking for library containing deflate... " >&6; } +if ${ac_cv_search_deflate+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char deflate (); +int +main () +{ +return deflate (); + ; + return 0; +} +_ACEOF +for ac_lib in '' z; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_deflate=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_deflate+:} false; then : + break +fi +done +if ${ac_cv_search_deflate+:} false; then : + +else + ac_cv_search_deflate=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_deflate" >&5 +$as_echo "$ac_cv_search_deflate" >&6; } +ac_res=$ac_cv_search_deflate +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_HAVE_ZLIB" +fi + + +fi + +done + + +{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing system" >&5 +$as_echo_n "checking for library containing system... " >&6; } +if ${ac_cv_search_system+:} false; then : + $as_echo_n "(cached) " >&6 +else + ac_func_search_save_LIBS=$LIBS +cat confdefs.h - <<_ACEOF >conftest.$ac_ext +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char system (); +int +main () +{ +return system (); + ; + return 0; +} +_ACEOF +for ac_lib in '' ; do + if test -z "$ac_lib"; then + ac_res="none required" + else + ac_res=-l$ac_lib + LIBS="-l$ac_lib $ac_func_search_save_LIBS" + fi + if ac_fn_c_try_link "$LINENO"; then : + ac_cv_search_system=$ac_res +fi +rm -f core conftest.err conftest.$ac_objext \ + conftest$ac_exeext + if ${ac_cv_search_system+:} false; then : + break +fi +done +if ${ac_cv_search_system+:} false; then : + +else + ac_cv_search_system=no +fi +rm conftest.$ac_ext +LIBS=$ac_func_search_save_LIBS +fi +{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_system" >&5 +$as_echo "$ac_cv_search_system" >&6; } +ac_res=$ac_cv_search_system +if test "$ac_res" != no; then : + test "$ac_res" = "none required" || LIBS="$ac_res $LIBS" + +else + SHELL_CFLAGS="-DSQLITE_NOHAVE_SYSTEM" +fi + + + #----------------------------------------------------------------------- # UPDATE: Maybe it's better if users just set CFLAGS before invoking # configure. This option doesn't really add much... @@ -14227,7 +14410,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by sqlite $as_me 3.20.0, which was +This file was extended by sqlite $as_me 3.26.0, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -14284,7 +14467,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -sqlite config.status 3.20.0 +sqlite config.status 3.26.0 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" --- contrib/sqlite3/configure.ac.orig +++ contrib/sqlite3/configure.ac @@ -10,8 +10,9 @@ # AC_PREREQ(2.61) -AC_INIT(sqlite, 3.20.0, http://www.sqlite.org) +AC_INIT(sqlite, 3.26.0, http://www.sqlite.org) AC_CONFIG_SRCDIR([sqlite3.c]) +AC_CONFIG_AUX_DIR([.]) # Use automake. AM_INIT_AUTOMAKE([foreign]) @@ -28,6 +29,7 @@ AC_FUNC_STRERROR_R AC_CONFIG_FILES([Makefile sqlite3.pc]) +BUILD_CFLAGS= AC_SUBST(BUILD_CFLAGS) #------------------------------------------------------------------------- @@ -85,13 +87,11 @@ AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING( [--enable-threadsafe], [build a thread-safe library [default=yes]])], [], [enable_threadsafe=yes]) -THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0 if test x"$enable_threadsafe" != "xno"; then - THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1" + BUILD_CFLAGS="$BUILD_CFLAGS -D_REENTRANT=1 -DSQLITE_THREADSAFE=1" AC_SEARCH_LIBS(pthread_create, pthread) AC_SEARCH_LIBS(pthread_mutexattr_init, pthread) fi -AC_SUBST(THREADSAFE_FLAGS) #----------------------------------------------------------------------- #----------------------------------------------------------------------- @@ -103,24 +103,44 @@ if test x"$enable_dynamic_extensions" != "xno"; then AC_SEARCH_LIBS(dlopen, dl) else - DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1 + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_OMIT_LOAD_EXTENSION=1" fi AC_MSG_CHECKING([for whether to support dynamic extensions]) AC_MSG_RESULT($enable_dynamic_extensions) -AC_SUBST(DYNAMIC_EXTENSION_FLAGS) #----------------------------------------------------------------------- #----------------------------------------------------------------------- +# --enable-fts4 +# +AC_ARG_ENABLE(fts4, [AS_HELP_STRING( + [--enable-fts4], [include fts4 support [default=yes]])], + [], [enable_fts4=yes]) +if test x"$enable_fts4" = "xyes"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS4" +fi +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- +# --enable-fts3 +# +AC_ARG_ENABLE(fts3, [AS_HELP_STRING( + [--enable-fts3], [include fts3 support [default=no]])], + [], []) +if test x"$enable_fts3" = "xyes" -a x"$enable_fts4" = "xno"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS3" +fi +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- # --enable-fts5 # AC_ARG_ENABLE(fts5, [AS_HELP_STRING( - [--enable-fts5], [include fts5 support [default=no]])], - [], [enable_fts5=no]) + [--enable-fts5], [include fts5 support [default=yes]])], + [], [enable_fts5=yes]) if test x"$enable_fts5" = "xyes"; then AC_SEARCH_LIBS(log, m) - FTS5_FLAGS=-DSQLITE_ENABLE_FTS5 + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_FTS5" fi -AC_SUBST(FTS5_FLAGS) #----------------------------------------------------------------------- #----------------------------------------------------------------------- @@ -127,27 +147,48 @@ # --enable-json1 # AC_ARG_ENABLE(json1, [AS_HELP_STRING( - [--enable-json1], [include json1 support [default=no]])], - [], [enable_json1=no]) + [--enable-json1], [include json1 support [default=yes]])], + [],[enable_json1=yes]) if test x"$enable_json1" = "xyes"; then - JSON1_FLAGS=-DSQLITE_ENABLE_JSON1 + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_JSON1" fi -AC_SUBST(JSON1_FLAGS) #----------------------------------------------------------------------- #----------------------------------------------------------------------- +# --enable-rtree +# +AC_ARG_ENABLE(rtree, [AS_HELP_STRING( + [--enable-rtree], [include rtree support [default=yes]])], + [], [enable_rtree=yes]) +if test x"$enable_rtree" = "xyes"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_RTREE" +fi +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- # --enable-session # AC_ARG_ENABLE(session, [AS_HELP_STRING( [--enable-session], [enable the session extension [default=no]])], - [], [enable_session=no]) + [], []) if test x"$enable_session" = "xyes"; then - SESSION_FLAGS="-DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK" + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_ENABLE_SESSION -DSQLITE_ENABLE_PREUPDATE_HOOK" fi -AC_SUBST(SESSION_FLAGS) #----------------------------------------------------------------------- #----------------------------------------------------------------------- +# --enable-debug +# +AC_ARG_ENABLE(debug, [AS_HELP_STRING( + [--enable-debug], [build with debugging features enabled [default=no]])], + [], []) +if test x"$enable_debug" = "xyes"; then + BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_DEBUG -DSQLITE_ENABLE_SELECTTRACE -DSQLITE_ENABLE_WHERETRACE" + CFLAGS="-g -O0" +fi +#----------------------------------------------------------------------- + +#----------------------------------------------------------------------- # --enable-static-shell # AC_ARG_ENABLE(static-shell, [AS_HELP_STRING( @@ -163,7 +204,13 @@ #----------------------------------------------------------------------- AC_CHECK_FUNCS(posix_fallocate) +AC_CHECK_HEADERS(zlib.h,[ + AC_SEARCH_LIBS(deflate,z,[BUILD_CFLAGS="$BUILD_CFLAGS -DSQLITE_HAVE_ZLIB"]) +]) +AC_SEARCH_LIBS(system,,,[SHELL_CFLAGS="-DSQLITE_NOHAVE_SYSTEM"]) +AC_SUBST(SHELL_CFLAGS) + #----------------------------------------------------------------------- # UPDATE: Maybe it's better if users just set CFLAGS before invoking # configure. This option doesn't really add much... --- contrib/sqlite3/shell.c.orig +++ contrib/sqlite3/shell.c @@ -79,6 +79,9 @@ #include #include #include "sqlite3.h" +typedef sqlite3_int64 i64; +typedef sqlite3_uint64 u64; +typedef unsigned char u8; #if SQLITE_USER_AUTHENTICATION # include "sqlite3userauth.h" #endif @@ -90,9 +93,22 @@ # if !defined(__RTP__) && !defined(_WRS_KERNEL) # include # endif +#endif +#if (!defined(_WIN32) && !defined(WIN32)) || defined(__MINGW32__) # include -# include +# include +# define GETPID getpid +# if defined(__MINGW32__) +# define DIRENT dirent +# ifndef S_ISLNK +# define S_ISLNK(mode) (0) +# endif +# endif +#else +# define GETPID (int)GetCurrentProcessId #endif +#include +#include #if HAVE_READLINE # include @@ -137,6 +153,9 @@ # ifndef access # define access(f,m) _access((f),(m)) # endif +# ifndef unlink +# define unlink _unlink +# endif # undef popen # define popen _popen # undef pclose @@ -358,6 +377,11 @@ #define UNUSED_PARAMETER(x) (void)(x) /* +** Number of elements in an array +*/ +#define ArraySize(X) (int)(sizeof(X)/sizeof(X[0])) + +/* ** If the following flag is set, then command execution stops ** at an error if we are not interactive. */ @@ -433,6 +457,12 @@ # define raw_printf fprintf #endif +/* Indicate out-of-memory and exit. */ +static void shell_out_of_memory(void){ + raw_printf(stderr,"Error: out of memory\n"); + exit(1); +} + /* ** Write I/O traces to the following stream. */ @@ -556,7 +586,7 @@ if( n+100>nLine ){ nLine = nLine*2 + 100; zLine = realloc(zLine, nLine); - if( zLine==0 ) return 0; + if( zLine==0 ) shell_out_of_memory(); } if( fgets(&zLine[n], nLine - n, in)==0 ){ if( n==0 ){ @@ -583,10 +613,7 @@ int nTrans = strlen30(zTrans)+1; if( nTrans>nLine ){ zLine = realloc(zLine, nTrans); - if( zLine==0 ){ - sqlite3_free(zTrans); - return 0; - } + if( zLine==0 ) shell_out_of_memory(); } memcpy(zLine, zTrans, nTrans); sqlite3_free(zTrans); @@ -629,7 +656,66 @@ } return zResult; } + + /* +** Return the value of a hexadecimal digit. Return -1 if the input +** is not a hex digit. +*/ +static int hexDigitValue(char c){ + if( c>='0' && c<='9' ) return c - '0'; + if( c>='a' && c<='f' ) return c - 'a' + 10; + if( c>='A' && c<='F' ) return c - 'A' + 10; + return -1; +} + +/* +** Interpret zArg as an integer value, possibly with suffixes. +*/ +static sqlite3_int64 integerValue(const char *zArg){ + sqlite3_int64 v = 0; + static const struct { char *zSuffix; int iMult; } aMult[] = { + { "KiB", 1024 }, + { "MiB", 1024*1024 }, + { "GiB", 1024*1024*1024 }, + { "KB", 1000 }, + { "MB", 1000000 }, + { "GB", 1000000000 }, + { "K", 1000 }, + { "M", 1000000 }, + { "G", 1000000000 }, + }; + int i; + int isNeg = 0; + if( zArg[0]=='-' ){ + isNeg = 1; + zArg++; + }else if( zArg[0]=='+' ){ + zArg++; + } + if( zArg[0]=='0' && zArg[1]=='x' ){ + int x; + zArg += 2; + while( (x = hexDigitValue(zArg[0]))>=0 ){ + v = (v<<4) + x; + zArg++; + } + }else{ + while( IsDigit(zArg[0]) ){ + v = v*10 + zArg[0] - '0'; + zArg++; + } + } + for(i=0; in+len>=p->nAlloc ){ p->nAlloc = p->nAlloc*2 + len + 20; p->z = realloc(p->z, p->nAlloc); - if( p->z==0 ){ - memset(p, 0, sizeof(*p)); - return; - } + if( p->z==0 ) shell_out_of_memory(); } if( quote ){ @@ -706,48 +789,82 @@ ** Return '"' if quoting is required. Return 0 if no quoting is required. */ static char quoteChar(const char *zName){ - /* All SQLite keywords, in alphabetical order */ - static const char *azKeywords[] = { - "ABORT", "ACTION", "ADD", "AFTER", "ALL", "ALTER", "ANALYZE", "AND", "AS", - "ASC", "ATTACH", "AUTOINCREMENT", "BEFORE", "BEGIN", "BETWEEN", "BY", - "CASCADE", "CASE", "CAST", "CHECK", "COLLATE", "COLUMN", "COMMIT", - "CONFLICT", "CONSTRAINT", "CREATE", "CROSS", "CURRENT_DATE", - "CURRENT_TIME", "CURRENT_TIMESTAMP", "DATABASE", "DEFAULT", "DEFERRABLE", - "DEFERRED", "DELETE", "DESC", "DETACH", "DISTINCT", "DROP", "EACH", - "ELSE", "END", "ESCAPE", "EXCEPT", "EXCLUSIVE", "EXISTS", "EXPLAIN", - "FAIL", "FOR", "FOREIGN", "FROM", "FULL", "GLOB", "GROUP", "HAVING", "IF", - "IGNORE", "IMMEDIATE", "IN", "INDEX", "INDEXED", "INITIALLY", "INNER", - "INSERT", "INSTEAD", "INTERSECT", "INTO", "IS", "ISNULL", "JOIN", "KEY", - "LEFT", "LIKE", "LIMIT", "MATCH", "NATURAL", "NO", "NOT", "NOTNULL", - "NULL", "OF", "OFFSET", "ON", "OR", "ORDER", "OUTER", "PLAN", "PRAGMA", - "PRIMARY", "QUERY", "RAISE", "RECURSIVE", "REFERENCES", "REGEXP", - "REINDEX", "RELEASE", "RENAME", "REPLACE", "RESTRICT", "RIGHT", - "ROLLBACK", "ROW", "SAVEPOINT", "SELECT", "SET", "TABLE", "TEMP", - "TEMPORARY", "THEN", "TO", "TRANSACTION", "TRIGGER", "UNION", "UNIQUE", - "UPDATE", "USING", "VACUUM", "VALUES", "VIEW", "VIRTUAL", "WHEN", "WHERE", - "WITH", "WITHOUT", - }; - int i, lwr, upr, mid, c; + int i; if( !isalpha((unsigned char)zName[0]) && zName[0]!='_' ) return '"'; for(i=0; zName[i]; i++){ if( !isalnum((unsigned char)zName[i]) && zName[i]!='_' ) return '"'; } - lwr = 0; - upr = sizeof(azKeywords)/sizeof(azKeywords[0]) - 1; - while( lwr<=upr ){ - mid = (lwr+upr)/2; - c = sqlite3_stricmp(azKeywords[mid], zName); - if( c==0 ) return '"'; - if( c<0 ){ - lwr = mid+1; - }else{ - upr = mid-1; - } + return sqlite3_keyword_check(zName, i) ? '"' : 0; +} + +/* +** Construct a fake object name and column list to describe the structure +** of the view, virtual table, or table valued function zSchema.zName. +*/ +static char *shellFakeSchema( + sqlite3 *db, /* The database connection containing the vtab */ + const char *zSchema, /* Schema of the database holding the vtab */ + const char *zName /* The name of the virtual table */ +){ + sqlite3_stmt *pStmt = 0; + char *zSql; + ShellText s; + char cQuote; + char *zDiv = "("; + int nRow = 0; + + zSql = sqlite3_mprintf("PRAGMA \"%w\".table_info=%Q;", + zSchema ? zSchema : "main", zName); + sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); + initText(&s); + if( zSchema ){ + cQuote = quoteChar(zSchema); + if( cQuote && sqlite3_stricmp(zSchema,"temp")==0 ) cQuote = 0; + appendText(&s, zSchema, cQuote); + appendText(&s, ".", 0); } - return 0; + cQuote = quoteChar(zName); + appendText(&s, zName, cQuote); + while( sqlite3_step(pStmt)==SQLITE_ROW ){ + const char *zCol = (const char*)sqlite3_column_text(pStmt, 1); + nRow++; + appendText(&s, zDiv, 0); + zDiv = ","; + cQuote = quoteChar(zCol); + appendText(&s, zCol, cQuote); + } + appendText(&s, ")", 0); + sqlite3_finalize(pStmt); + if( nRow==0 ){ + freeText(&s); + s.z = 0; + } + return s.z; } /* +** SQL function: shell_module_schema(X) +** +** Return a fake schema for the table-valued function or eponymous virtual +** table X. +*/ +static void shellModuleSchema( + sqlite3_context *pCtx, + int nVal, + sqlite3_value **apVal +){ + const char *zName = (const char*)sqlite3_value_text(apVal[0]); + char *zFake = shellFakeSchema(sqlite3_context_db_handle(pCtx), 0, zName); + UNUSED_PARAMETER(nVal); + if( zFake ){ + sqlite3_result_text(pCtx, sqlite3_mprintf("/* %s */", zFake), + -1, sqlite3_free); + free(zFake); + } +} + +/* ** SQL function: shell_add_schema(S,X) ** ** Add the schema name X to the CREATE statement in S and return the result. @@ -782,20 +899,38 @@ int i = 0; const char *zIn = (const char*)sqlite3_value_text(apVal[0]); const char *zSchema = (const char*)sqlite3_value_text(apVal[1]); - assert( nVal==2 ); + const char *zName = (const char*)sqlite3_value_text(apVal[2]); + sqlite3 *db = sqlite3_context_db_handle(pCtx); + UNUSED_PARAMETER(nVal); if( zIn!=0 && strncmp(zIn, "CREATE ", 7)==0 ){ for(i=0; i<(int)(sizeof(aPrefix)/sizeof(aPrefix[0])); i++){ int n = strlen30(aPrefix[i]); if( strncmp(zIn+7, aPrefix[i], n)==0 && zIn[n+7]==' ' ){ - char cQuote = quoteChar(zSchema); - char *z; - if( cQuote ){ - z = sqlite3_mprintf("%.*s \"%w\".%s", n+7, zIn, zSchema, zIn+n+8); - }else{ - z = sqlite3_mprintf("%.*s %s.%s", n+7, zIn, zSchema, zIn+n+8); + char *z = 0; + char *zFake = 0; + if( zSchema ){ + char cQuote = quoteChar(zSchema); + if( cQuote && sqlite3_stricmp(zSchema,"temp")!=0 ){ + z = sqlite3_mprintf("%.*s \"%w\".%s", n+7, zIn, zSchema, zIn+n+8); + }else{ + z = sqlite3_mprintf("%.*s %s.%s", n+7, zIn, zSchema, zIn+n+8); + } } - sqlite3_result_text(pCtx, z, -1, sqlite3_free); - return; + if( zName + && aPrefix[i][0]=='V' + && (zFake = shellFakeSchema(db, zSchema, zName))!=0 + ){ + if( z==0 ){ + z = sqlite3_mprintf("%s\n/* %s */", zIn, zFake); + }else{ + z = sqlite3_mprintf("%z\n/* %s */", z, zFake); + } + free(zFake); + } + if( z ){ + sqlite3_result_text(pCtx, z, -1, sqlite3_free); + return; + } } } } @@ -811,6 +946,364 @@ #define SQLITE_EXTENSION_INIT1 #define SQLITE_EXTENSION_INIT2(X) (void)(X) +#if defined(_WIN32) && defined(_MSC_VER) +/************************* Begin test_windirent.h ******************/ +/* +** 2015 November 30 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains declarations for most of the opendir() family of +** POSIX functions on Win32 using the MSVCRT. +*/ + +#if defined(_WIN32) && defined(_MSC_VER) && !defined(SQLITE_WINDIRENT_H) +#define SQLITE_WINDIRENT_H + +/* +** We need several data types from the Windows SDK header. +*/ + +#ifndef WIN32_LEAN_AND_MEAN +#define WIN32_LEAN_AND_MEAN +#endif + +#include "windows.h" + +/* +** We need several support functions from the SQLite core. +*/ + + +/* +** We need several things from the ANSI and MSVCRT headers. +*/ + +#include +#include +#include +#include +#include +#include +#include + +/* +** We may need several defines that should have been in "sys/stat.h". +*/ + +#ifndef S_ISREG +#define S_ISREG(mode) (((mode) & S_IFMT) == S_IFREG) +#endif + +#ifndef S_ISDIR +#define S_ISDIR(mode) (((mode) & S_IFMT) == S_IFDIR) +#endif + +#ifndef S_ISLNK +#define S_ISLNK(mode) (0) +#endif + +/* +** We may need to provide the "mode_t" type. +*/ + +#ifndef MODE_T_DEFINED + #define MODE_T_DEFINED + typedef unsigned short mode_t; +#endif + +/* +** We may need to provide the "ino_t" type. +*/ + +#ifndef INO_T_DEFINED + #define INO_T_DEFINED + typedef unsigned short ino_t; +#endif + +/* +** We need to define "NAME_MAX" if it was not present in "limits.h". +*/ + +#ifndef NAME_MAX +# ifdef FILENAME_MAX +# define NAME_MAX (FILENAME_MAX) +# else +# define NAME_MAX (260) +# endif +#endif + +/* +** We need to define "NULL_INTPTR_T" and "BAD_INTPTR_T". +*/ + +#ifndef NULL_INTPTR_T +# define NULL_INTPTR_T ((intptr_t)(0)) +#endif + +#ifndef BAD_INTPTR_T +# define BAD_INTPTR_T ((intptr_t)(-1)) +#endif + +/* +** We need to provide the necessary structures and related types. +*/ + +#ifndef DIRENT_DEFINED +#define DIRENT_DEFINED +typedef struct DIRENT DIRENT; +typedef DIRENT *LPDIRENT; +struct DIRENT { + ino_t d_ino; /* Sequence number, do not use. */ + unsigned d_attributes; /* Win32 file attributes. */ + char d_name[NAME_MAX + 1]; /* Name within the directory. */ +}; +#endif + +#ifndef DIR_DEFINED +#define DIR_DEFINED +typedef struct DIR DIR; +typedef DIR *LPDIR; +struct DIR { + intptr_t d_handle; /* Value returned by "_findfirst". */ + DIRENT d_first; /* DIRENT constructed based on "_findfirst". */ + DIRENT d_next; /* DIRENT constructed based on "_findnext". */ +}; +#endif + +/* +** Provide a macro, for use by the implementation, to determine if a +** particular directory entry should be skipped over when searching for +** the next directory entry that should be returned by the readdir() or +** readdir_r() functions. +*/ + +#ifndef is_filtered +# define is_filtered(a) ((((a).attrib)&_A_HIDDEN) || (((a).attrib)&_A_SYSTEM)) +#endif + +/* +** Provide the function prototype for the POSIX compatiable getenv() +** function. This function is not thread-safe. +*/ + +extern const char *windirent_getenv(const char *name); + +/* +** Finally, we can provide the function prototypes for the opendir(), +** readdir(), readdir_r(), and closedir() POSIX functions. +*/ + +extern LPDIR opendir(const char *dirname); +extern LPDIRENT readdir(LPDIR dirp); +extern INT readdir_r(LPDIR dirp, LPDIRENT entry, LPDIRENT *result); +extern INT closedir(LPDIR dirp); + +#endif /* defined(WIN32) && defined(_MSC_VER) */ + +/************************* End test_windirent.h ********************/ +/************************* Begin test_windirent.c ******************/ +/* +** 2015 November 30 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code to implement most of the opendir() family of +** POSIX functions on Win32 using the MSVCRT. +*/ + +#if defined(_WIN32) && defined(_MSC_VER) +/* #include "test_windirent.h" */ + +/* +** Implementation of the POSIX getenv() function using the Win32 API. +** This function is not thread-safe. +*/ +const char *windirent_getenv( + const char *name +){ + static char value[32768]; /* Maximum length, per MSDN */ + DWORD dwSize = sizeof(value) / sizeof(char); /* Size in chars */ + DWORD dwRet; /* Value returned by GetEnvironmentVariableA() */ + + memset(value, 0, sizeof(value)); + dwRet = GetEnvironmentVariableA(name, value, dwSize); + if( dwRet==0 || dwRet>dwSize ){ + /* + ** The function call to GetEnvironmentVariableA() failed -OR- + ** the buffer is not large enough. Either way, return NULL. + */ + return 0; + }else{ + /* + ** The function call to GetEnvironmentVariableA() succeeded + ** -AND- the buffer contains the entire value. + */ + return value; + } +} + +/* +** Implementation of the POSIX opendir() function using the MSVCRT. +*/ +LPDIR opendir( + const char *dirname +){ + struct _finddata_t data; + LPDIR dirp = (LPDIR)sqlite3_malloc(sizeof(DIR)); + SIZE_T namesize = sizeof(data.name) / sizeof(data.name[0]); + + if( dirp==NULL ) return NULL; + memset(dirp, 0, sizeof(DIR)); + + /* TODO: Remove this if Unix-style root paths are not used. */ + if( sqlite3_stricmp(dirname, "/")==0 ){ + dirname = windirent_getenv("SystemDrive"); + } + + memset(&data, 0, sizeof(struct _finddata_t)); + _snprintf(data.name, namesize, "%s\\*", dirname); + dirp->d_handle = _findfirst(data.name, &data); + + if( dirp->d_handle==BAD_INTPTR_T ){ + closedir(dirp); + return NULL; + } + + /* TODO: Remove this block to allow hidden and/or system files. */ + if( is_filtered(data) ){ +next: + + memset(&data, 0, sizeof(struct _finddata_t)); + if( _findnext(dirp->d_handle, &data)==-1 ){ + closedir(dirp); + return NULL; + } + + /* TODO: Remove this block to allow hidden and/or system files. */ + if( is_filtered(data) ) goto next; + } + + dirp->d_first.d_attributes = data.attrib; + strncpy(dirp->d_first.d_name, data.name, NAME_MAX); + dirp->d_first.d_name[NAME_MAX] = '\0'; + + return dirp; +} + +/* +** Implementation of the POSIX readdir() function using the MSVCRT. +*/ +LPDIRENT readdir( + LPDIR dirp +){ + struct _finddata_t data; + + if( dirp==NULL ) return NULL; + + if( dirp->d_first.d_ino==0 ){ + dirp->d_first.d_ino++; + dirp->d_next.d_ino++; + + return &dirp->d_first; + } + +next: + + memset(&data, 0, sizeof(struct _finddata_t)); + if( _findnext(dirp->d_handle, &data)==-1 ) return NULL; + + /* TODO: Remove this block to allow hidden and/or system files. */ + if( is_filtered(data) ) goto next; + + dirp->d_next.d_ino++; + dirp->d_next.d_attributes = data.attrib; + strncpy(dirp->d_next.d_name, data.name, NAME_MAX); + dirp->d_next.d_name[NAME_MAX] = '\0'; + + return &dirp->d_next; +} + +/* +** Implementation of the POSIX readdir_r() function using the MSVCRT. +*/ +INT readdir_r( + LPDIR dirp, + LPDIRENT entry, + LPDIRENT *result +){ + struct _finddata_t data; + + if( dirp==NULL ) return EBADF; + + if( dirp->d_first.d_ino==0 ){ + dirp->d_first.d_ino++; + dirp->d_next.d_ino++; + + entry->d_ino = dirp->d_first.d_ino; + entry->d_attributes = dirp->d_first.d_attributes; + strncpy(entry->d_name, dirp->d_first.d_name, NAME_MAX); + entry->d_name[NAME_MAX] = '\0'; + + *result = entry; + return 0; + } + +next: + + memset(&data, 0, sizeof(struct _finddata_t)); + if( _findnext(dirp->d_handle, &data)==-1 ){ + *result = NULL; + return ENOENT; + } + + /* TODO: Remove this block to allow hidden and/or system files. */ + if( is_filtered(data) ) goto next; + + entry->d_ino = (ino_t)-1; /* not available */ + entry->d_attributes = data.attrib; + strncpy(entry->d_name, data.name, NAME_MAX); + entry->d_name[NAME_MAX] = '\0'; + + *result = entry; + return 0; +} + +/* +** Implementation of the POSIX closedir() function using the MSVCRT. +*/ +INT closedir( + LPDIR dirp +){ + INT result = 0; + + if( dirp==NULL ) return EINVAL; + + if( dirp->d_handle!=NULL_INTPTR_T && dirp->d_handle!=BAD_INTPTR_T ){ + result = _findclose(dirp->d_handle); + } + + sqlite3_free(dirp); + return result; +} + +#endif /* defined(WIN32) && defined(_MSC_VER) */ + +/************************* End test_windirent.c ********************/ +#define dirent DIRENT +#endif /************************* Begin ../ext/misc/shathree.c ******************/ /* ** 2017-03-08 @@ -824,7 +1317,7 @@ ** ****************************************************************************** ** -** This SQLite extension implements a functions that compute SHA1 hashes. +** This SQLite extension implements functions that compute SHA3 hashes. ** Two SQL functions are implemented: ** ** sha3(X,SIZE) @@ -844,7 +1337,7 @@ #include #include #include -typedef sqlite3_uint64 u64; +/* typedef sqlite3_uint64 u64; */ /****************************************************************************** ** The Hash Engine @@ -891,9 +1384,9 @@ */ static void KeccakF1600Step(SHA3Context *p){ int i; - u64 B0, B1, B2, B3, B4; - u64 C0, C1, C2, C3, C4; - u64 D0, D1, D2, D3, D4; + u64 b0, b1, b2, b3, b4; + u64 c0, c1, c2, c3, c4; + u64 d0, d1, d2, d3, d4; static const u64 RC[] = { 0x0000000000000001ULL, 0x0000000000008082ULL, 0x800000000000808aULL, 0x8000000080008000ULL, @@ -908,301 +1401,301 @@ 0x8000000080008081ULL, 0x8000000000008080ULL, 0x0000000080000001ULL, 0x8000000080008008ULL }; -# define A00 (p->u.s[0]) -# define A01 (p->u.s[1]) -# define A02 (p->u.s[2]) -# define A03 (p->u.s[3]) -# define A04 (p->u.s[4]) -# define A10 (p->u.s[5]) -# define A11 (p->u.s[6]) -# define A12 (p->u.s[7]) -# define A13 (p->u.s[8]) -# define A14 (p->u.s[9]) -# define A20 (p->u.s[10]) -# define A21 (p->u.s[11]) -# define A22 (p->u.s[12]) -# define A23 (p->u.s[13]) -# define A24 (p->u.s[14]) -# define A30 (p->u.s[15]) -# define A31 (p->u.s[16]) -# define A32 (p->u.s[17]) -# define A33 (p->u.s[18]) -# define A34 (p->u.s[19]) -# define A40 (p->u.s[20]) -# define A41 (p->u.s[21]) -# define A42 (p->u.s[22]) -# define A43 (p->u.s[23]) -# define A44 (p->u.s[24]) +# define a00 (p->u.s[0]) +# define a01 (p->u.s[1]) +# define a02 (p->u.s[2]) +# define a03 (p->u.s[3]) +# define a04 (p->u.s[4]) +# define a10 (p->u.s[5]) +# define a11 (p->u.s[6]) +# define a12 (p->u.s[7]) +# define a13 (p->u.s[8]) +# define a14 (p->u.s[9]) +# define a20 (p->u.s[10]) +# define a21 (p->u.s[11]) +# define a22 (p->u.s[12]) +# define a23 (p->u.s[13]) +# define a24 (p->u.s[14]) +# define a30 (p->u.s[15]) +# define a31 (p->u.s[16]) +# define a32 (p->u.s[17]) +# define a33 (p->u.s[18]) +# define a34 (p->u.s[19]) +# define a40 (p->u.s[20]) +# define a41 (p->u.s[21]) +# define a42 (p->u.s[22]) +# define a43 (p->u.s[23]) +# define a44 (p->u.s[24]) # define ROL64(a,x) ((a<>(64-x))) for(i=0; i<24; i+=4){ - C0 = A00^A10^A20^A30^A40; - C1 = A01^A11^A21^A31^A41; - C2 = A02^A12^A22^A32^A42; - C3 = A03^A13^A23^A33^A43; - C4 = A04^A14^A24^A34^A44; - D0 = C4^ROL64(C1, 1); - D1 = C0^ROL64(C2, 1); - D2 = C1^ROL64(C3, 1); - D3 = C2^ROL64(C4, 1); - D4 = C3^ROL64(C0, 1); + c0 = a00^a10^a20^a30^a40; + c1 = a01^a11^a21^a31^a41; + c2 = a02^a12^a22^a32^a42; + c3 = a03^a13^a23^a33^a43; + c4 = a04^a14^a24^a34^a44; + d0 = c4^ROL64(c1, 1); + d1 = c0^ROL64(c2, 1); + d2 = c1^ROL64(c3, 1); + d3 = c2^ROL64(c4, 1); + d4 = c3^ROL64(c0, 1); - B0 = (A00^D0); - B1 = ROL64((A11^D1), 44); - B2 = ROL64((A22^D2), 43); - B3 = ROL64((A33^D3), 21); - B4 = ROL64((A44^D4), 14); - A00 = B0 ^((~B1)& B2 ); - A00 ^= RC[i]; - A11 = B1 ^((~B2)& B3 ); - A22 = B2 ^((~B3)& B4 ); - A33 = B3 ^((~B4)& B0 ); - A44 = B4 ^((~B0)& B1 ); + b0 = (a00^d0); + b1 = ROL64((a11^d1), 44); + b2 = ROL64((a22^d2), 43); + b3 = ROL64((a33^d3), 21); + b4 = ROL64((a44^d4), 14); + a00 = b0 ^((~b1)& b2 ); + a00 ^= RC[i]; + a11 = b1 ^((~b2)& b3 ); + a22 = b2 ^((~b3)& b4 ); + a33 = b3 ^((~b4)& b0 ); + a44 = b4 ^((~b0)& b1 ); - B2 = ROL64((A20^D0), 3); - B3 = ROL64((A31^D1), 45); - B4 = ROL64((A42^D2), 61); - B0 = ROL64((A03^D3), 28); - B1 = ROL64((A14^D4), 20); - A20 = B0 ^((~B1)& B2 ); - A31 = B1 ^((~B2)& B3 ); - A42 = B2 ^((~B3)& B4 ); - A03 = B3 ^((~B4)& B0 ); - A14 = B4 ^((~B0)& B1 ); + b2 = ROL64((a20^d0), 3); + b3 = ROL64((a31^d1), 45); + b4 = ROL64((a42^d2), 61); + b0 = ROL64((a03^d3), 28); + b1 = ROL64((a14^d4), 20); + a20 = b0 ^((~b1)& b2 ); + a31 = b1 ^((~b2)& b3 ); + a42 = b2 ^((~b3)& b4 ); + a03 = b3 ^((~b4)& b0 ); + a14 = b4 ^((~b0)& b1 ); - B4 = ROL64((A40^D0), 18); - B0 = ROL64((A01^D1), 1); - B1 = ROL64((A12^D2), 6); - B2 = ROL64((A23^D3), 25); - B3 = ROL64((A34^D4), 8); - A40 = B0 ^((~B1)& B2 ); - A01 = B1 ^((~B2)& B3 ); - A12 = B2 ^((~B3)& B4 ); - A23 = B3 ^((~B4)& B0 ); - A34 = B4 ^((~B0)& B1 ); + b4 = ROL64((a40^d0), 18); + b0 = ROL64((a01^d1), 1); + b1 = ROL64((a12^d2), 6); + b2 = ROL64((a23^d3), 25); + b3 = ROL64((a34^d4), 8); + a40 = b0 ^((~b1)& b2 ); + a01 = b1 ^((~b2)& b3 ); + a12 = b2 ^((~b3)& b4 ); + a23 = b3 ^((~b4)& b0 ); + a34 = b4 ^((~b0)& b1 ); - B1 = ROL64((A10^D0), 36); - B2 = ROL64((A21^D1), 10); - B3 = ROL64((A32^D2), 15); - B4 = ROL64((A43^D3), 56); - B0 = ROL64((A04^D4), 27); - A10 = B0 ^((~B1)& B2 ); - A21 = B1 ^((~B2)& B3 ); - A32 = B2 ^((~B3)& B4 ); - A43 = B3 ^((~B4)& B0 ); - A04 = B4 ^((~B0)& B1 ); + b1 = ROL64((a10^d0), 36); + b2 = ROL64((a21^d1), 10); + b3 = ROL64((a32^d2), 15); + b4 = ROL64((a43^d3), 56); + b0 = ROL64((a04^d4), 27); + a10 = b0 ^((~b1)& b2 ); + a21 = b1 ^((~b2)& b3 ); + a32 = b2 ^((~b3)& b4 ); + a43 = b3 ^((~b4)& b0 ); + a04 = b4 ^((~b0)& b1 ); - B3 = ROL64((A30^D0), 41); - B4 = ROL64((A41^D1), 2); - B0 = ROL64((A02^D2), 62); - B1 = ROL64((A13^D3), 55); - B2 = ROL64((A24^D4), 39); - A30 = B0 ^((~B1)& B2 ); - A41 = B1 ^((~B2)& B3 ); - A02 = B2 ^((~B3)& B4 ); - A13 = B3 ^((~B4)& B0 ); - A24 = B4 ^((~B0)& B1 ); + b3 = ROL64((a30^d0), 41); + b4 = ROL64((a41^d1), 2); + b0 = ROL64((a02^d2), 62); + b1 = ROL64((a13^d3), 55); + b2 = ROL64((a24^d4), 39); + a30 = b0 ^((~b1)& b2 ); + a41 = b1 ^((~b2)& b3 ); + a02 = b2 ^((~b3)& b4 ); + a13 = b3 ^((~b4)& b0 ); + a24 = b4 ^((~b0)& b1 ); - C0 = A00^A20^A40^A10^A30; - C1 = A11^A31^A01^A21^A41; - C2 = A22^A42^A12^A32^A02; - C3 = A33^A03^A23^A43^A13; - C4 = A44^A14^A34^A04^A24; - D0 = C4^ROL64(C1, 1); - D1 = C0^ROL64(C2, 1); - D2 = C1^ROL64(C3, 1); - D3 = C2^ROL64(C4, 1); - D4 = C3^ROL64(C0, 1); + c0 = a00^a20^a40^a10^a30; + c1 = a11^a31^a01^a21^a41; + c2 = a22^a42^a12^a32^a02; + c3 = a33^a03^a23^a43^a13; + c4 = a44^a14^a34^a04^a24; + d0 = c4^ROL64(c1, 1); + d1 = c0^ROL64(c2, 1); + d2 = c1^ROL64(c3, 1); + d3 = c2^ROL64(c4, 1); + d4 = c3^ROL64(c0, 1); - B0 = (A00^D0); - B1 = ROL64((A31^D1), 44); - B2 = ROL64((A12^D2), 43); - B3 = ROL64((A43^D3), 21); - B4 = ROL64((A24^D4), 14); - A00 = B0 ^((~B1)& B2 ); - A00 ^= RC[i+1]; - A31 = B1 ^((~B2)& B3 ); - A12 = B2 ^((~B3)& B4 ); - A43 = B3 ^((~B4)& B0 ); - A24 = B4 ^((~B0)& B1 ); + b0 = (a00^d0); + b1 = ROL64((a31^d1), 44); + b2 = ROL64((a12^d2), 43); + b3 = ROL64((a43^d3), 21); + b4 = ROL64((a24^d4), 14); + a00 = b0 ^((~b1)& b2 ); + a00 ^= RC[i+1]; + a31 = b1 ^((~b2)& b3 ); + a12 = b2 ^((~b3)& b4 ); + a43 = b3 ^((~b4)& b0 ); + a24 = b4 ^((~b0)& b1 ); - B2 = ROL64((A40^D0), 3); - B3 = ROL64((A21^D1), 45); - B4 = ROL64((A02^D2), 61); - B0 = ROL64((A33^D3), 28); - B1 = ROL64((A14^D4), 20); - A40 = B0 ^((~B1)& B2 ); - A21 = B1 ^((~B2)& B3 ); - A02 = B2 ^((~B3)& B4 ); - A33 = B3 ^((~B4)& B0 ); - A14 = B4 ^((~B0)& B1 ); + b2 = ROL64((a40^d0), 3); + b3 = ROL64((a21^d1), 45); + b4 = ROL64((a02^d2), 61); + b0 = ROL64((a33^d3), 28); + b1 = ROL64((a14^d4), 20); + a40 = b0 ^((~b1)& b2 ); + a21 = b1 ^((~b2)& b3 ); + a02 = b2 ^((~b3)& b4 ); + a33 = b3 ^((~b4)& b0 ); + a14 = b4 ^((~b0)& b1 ); - B4 = ROL64((A30^D0), 18); - B0 = ROL64((A11^D1), 1); - B1 = ROL64((A42^D2), 6); - B2 = ROL64((A23^D3), 25); - B3 = ROL64((A04^D4), 8); - A30 = B0 ^((~B1)& B2 ); - A11 = B1 ^((~B2)& B3 ); - A42 = B2 ^((~B3)& B4 ); - A23 = B3 ^((~B4)& B0 ); - A04 = B4 ^((~B0)& B1 ); + b4 = ROL64((a30^d0), 18); + b0 = ROL64((a11^d1), 1); + b1 = ROL64((a42^d2), 6); + b2 = ROL64((a23^d3), 25); + b3 = ROL64((a04^d4), 8); + a30 = b0 ^((~b1)& b2 ); + a11 = b1 ^((~b2)& b3 ); + a42 = b2 ^((~b3)& b4 ); + a23 = b3 ^((~b4)& b0 ); + a04 = b4 ^((~b0)& b1 ); - B1 = ROL64((A20^D0), 36); - B2 = ROL64((A01^D1), 10); - B3 = ROL64((A32^D2), 15); - B4 = ROL64((A13^D3), 56); - B0 = ROL64((A44^D4), 27); - A20 = B0 ^((~B1)& B2 ); - A01 = B1 ^((~B2)& B3 ); - A32 = B2 ^((~B3)& B4 ); - A13 = B3 ^((~B4)& B0 ); - A44 = B4 ^((~B0)& B1 ); + b1 = ROL64((a20^d0), 36); + b2 = ROL64((a01^d1), 10); + b3 = ROL64((a32^d2), 15); + b4 = ROL64((a13^d3), 56); + b0 = ROL64((a44^d4), 27); + a20 = b0 ^((~b1)& b2 ); + a01 = b1 ^((~b2)& b3 ); + a32 = b2 ^((~b3)& b4 ); + a13 = b3 ^((~b4)& b0 ); + a44 = b4 ^((~b0)& b1 ); - B3 = ROL64((A10^D0), 41); - B4 = ROL64((A41^D1), 2); - B0 = ROL64((A22^D2), 62); - B1 = ROL64((A03^D3), 55); - B2 = ROL64((A34^D4), 39); - A10 = B0 ^((~B1)& B2 ); - A41 = B1 ^((~B2)& B3 ); - A22 = B2 ^((~B3)& B4 ); - A03 = B3 ^((~B4)& B0 ); - A34 = B4 ^((~B0)& B1 ); + b3 = ROL64((a10^d0), 41); + b4 = ROL64((a41^d1), 2); + b0 = ROL64((a22^d2), 62); + b1 = ROL64((a03^d3), 55); + b2 = ROL64((a34^d4), 39); + a10 = b0 ^((~b1)& b2 ); + a41 = b1 ^((~b2)& b3 ); + a22 = b2 ^((~b3)& b4 ); + a03 = b3 ^((~b4)& b0 ); + a34 = b4 ^((~b0)& b1 ); - C0 = A00^A40^A30^A20^A10; - C1 = A31^A21^A11^A01^A41; - C2 = A12^A02^A42^A32^A22; - C3 = A43^A33^A23^A13^A03; - C4 = A24^A14^A04^A44^A34; - D0 = C4^ROL64(C1, 1); - D1 = C0^ROL64(C2, 1); - D2 = C1^ROL64(C3, 1); - D3 = C2^ROL64(C4, 1); - D4 = C3^ROL64(C0, 1); + c0 = a00^a40^a30^a20^a10; + c1 = a31^a21^a11^a01^a41; + c2 = a12^a02^a42^a32^a22; + c3 = a43^a33^a23^a13^a03; + c4 = a24^a14^a04^a44^a34; + d0 = c4^ROL64(c1, 1); + d1 = c0^ROL64(c2, 1); + d2 = c1^ROL64(c3, 1); + d3 = c2^ROL64(c4, 1); + d4 = c3^ROL64(c0, 1); - B0 = (A00^D0); - B1 = ROL64((A21^D1), 44); - B2 = ROL64((A42^D2), 43); - B3 = ROL64((A13^D3), 21); - B4 = ROL64((A34^D4), 14); - A00 = B0 ^((~B1)& B2 ); - A00 ^= RC[i+2]; - A21 = B1 ^((~B2)& B3 ); - A42 = B2 ^((~B3)& B4 ); - A13 = B3 ^((~B4)& B0 ); - A34 = B4 ^((~B0)& B1 ); + b0 = (a00^d0); + b1 = ROL64((a21^d1), 44); + b2 = ROL64((a42^d2), 43); + b3 = ROL64((a13^d3), 21); + b4 = ROL64((a34^d4), 14); + a00 = b0 ^((~b1)& b2 ); + a00 ^= RC[i+2]; + a21 = b1 ^((~b2)& b3 ); + a42 = b2 ^((~b3)& b4 ); + a13 = b3 ^((~b4)& b0 ); + a34 = b4 ^((~b0)& b1 ); - B2 = ROL64((A30^D0), 3); - B3 = ROL64((A01^D1), 45); - B4 = ROL64((A22^D2), 61); - B0 = ROL64((A43^D3), 28); - B1 = ROL64((A14^D4), 20); - A30 = B0 ^((~B1)& B2 ); - A01 = B1 ^((~B2)& B3 ); - A22 = B2 ^((~B3)& B4 ); - A43 = B3 ^((~B4)& B0 ); - A14 = B4 ^((~B0)& B1 ); + b2 = ROL64((a30^d0), 3); + b3 = ROL64((a01^d1), 45); + b4 = ROL64((a22^d2), 61); + b0 = ROL64((a43^d3), 28); + b1 = ROL64((a14^d4), 20); + a30 = b0 ^((~b1)& b2 ); + a01 = b1 ^((~b2)& b3 ); + a22 = b2 ^((~b3)& b4 ); + a43 = b3 ^((~b4)& b0 ); + a14 = b4 ^((~b0)& b1 ); - B4 = ROL64((A10^D0), 18); - B0 = ROL64((A31^D1), 1); - B1 = ROL64((A02^D2), 6); - B2 = ROL64((A23^D3), 25); - B3 = ROL64((A44^D4), 8); - A10 = B0 ^((~B1)& B2 ); - A31 = B1 ^((~B2)& B3 ); - A02 = B2 ^((~B3)& B4 ); - A23 = B3 ^((~B4)& B0 ); - A44 = B4 ^((~B0)& B1 ); + b4 = ROL64((a10^d0), 18); + b0 = ROL64((a31^d1), 1); + b1 = ROL64((a02^d2), 6); + b2 = ROL64((a23^d3), 25); + b3 = ROL64((a44^d4), 8); + a10 = b0 ^((~b1)& b2 ); + a31 = b1 ^((~b2)& b3 ); + a02 = b2 ^((~b3)& b4 ); + a23 = b3 ^((~b4)& b0 ); + a44 = b4 ^((~b0)& b1 ); - B1 = ROL64((A40^D0), 36); - B2 = ROL64((A11^D1), 10); - B3 = ROL64((A32^D2), 15); - B4 = ROL64((A03^D3), 56); - B0 = ROL64((A24^D4), 27); - A40 = B0 ^((~B1)& B2 ); - A11 = B1 ^((~B2)& B3 ); - A32 = B2 ^((~B3)& B4 ); - A03 = B3 ^((~B4)& B0 ); - A24 = B4 ^((~B0)& B1 ); + b1 = ROL64((a40^d0), 36); + b2 = ROL64((a11^d1), 10); + b3 = ROL64((a32^d2), 15); + b4 = ROL64((a03^d3), 56); + b0 = ROL64((a24^d4), 27); + a40 = b0 ^((~b1)& b2 ); + a11 = b1 ^((~b2)& b3 ); + a32 = b2 ^((~b3)& b4 ); + a03 = b3 ^((~b4)& b0 ); + a24 = b4 ^((~b0)& b1 ); - B3 = ROL64((A20^D0), 41); - B4 = ROL64((A41^D1), 2); - B0 = ROL64((A12^D2), 62); - B1 = ROL64((A33^D3), 55); - B2 = ROL64((A04^D4), 39); - A20 = B0 ^((~B1)& B2 ); - A41 = B1 ^((~B2)& B3 ); - A12 = B2 ^((~B3)& B4 ); - A33 = B3 ^((~B4)& B0 ); - A04 = B4 ^((~B0)& B1 ); + b3 = ROL64((a20^d0), 41); + b4 = ROL64((a41^d1), 2); + b0 = ROL64((a12^d2), 62); + b1 = ROL64((a33^d3), 55); + b2 = ROL64((a04^d4), 39); + a20 = b0 ^((~b1)& b2 ); + a41 = b1 ^((~b2)& b3 ); + a12 = b2 ^((~b3)& b4 ); + a33 = b3 ^((~b4)& b0 ); + a04 = b4 ^((~b0)& b1 ); - C0 = A00^A30^A10^A40^A20; - C1 = A21^A01^A31^A11^A41; - C2 = A42^A22^A02^A32^A12; - C3 = A13^A43^A23^A03^A33; - C4 = A34^A14^A44^A24^A04; - D0 = C4^ROL64(C1, 1); - D1 = C0^ROL64(C2, 1); - D2 = C1^ROL64(C3, 1); - D3 = C2^ROL64(C4, 1); - D4 = C3^ROL64(C0, 1); + c0 = a00^a30^a10^a40^a20; + c1 = a21^a01^a31^a11^a41; + c2 = a42^a22^a02^a32^a12; + c3 = a13^a43^a23^a03^a33; + c4 = a34^a14^a44^a24^a04; + d0 = c4^ROL64(c1, 1); + d1 = c0^ROL64(c2, 1); + d2 = c1^ROL64(c3, 1); + d3 = c2^ROL64(c4, 1); + d4 = c3^ROL64(c0, 1); - B0 = (A00^D0); - B1 = ROL64((A01^D1), 44); - B2 = ROL64((A02^D2), 43); - B3 = ROL64((A03^D3), 21); - B4 = ROL64((A04^D4), 14); - A00 = B0 ^((~B1)& B2 ); - A00 ^= RC[i+3]; - A01 = B1 ^((~B2)& B3 ); - A02 = B2 ^((~B3)& B4 ); - A03 = B3 ^((~B4)& B0 ); - A04 = B4 ^((~B0)& B1 ); + b0 = (a00^d0); + b1 = ROL64((a01^d1), 44); + b2 = ROL64((a02^d2), 43); + b3 = ROL64((a03^d3), 21); + b4 = ROL64((a04^d4), 14); + a00 = b0 ^((~b1)& b2 ); + a00 ^= RC[i+3]; + a01 = b1 ^((~b2)& b3 ); + a02 = b2 ^((~b3)& b4 ); + a03 = b3 ^((~b4)& b0 ); + a04 = b4 ^((~b0)& b1 ); - B2 = ROL64((A10^D0), 3); - B3 = ROL64((A11^D1), 45); - B4 = ROL64((A12^D2), 61); - B0 = ROL64((A13^D3), 28); - B1 = ROL64((A14^D4), 20); - A10 = B0 ^((~B1)& B2 ); - A11 = B1 ^((~B2)& B3 ); - A12 = B2 ^((~B3)& B4 ); - A13 = B3 ^((~B4)& B0 ); - A14 = B4 ^((~B0)& B1 ); + b2 = ROL64((a10^d0), 3); + b3 = ROL64((a11^d1), 45); + b4 = ROL64((a12^d2), 61); + b0 = ROL64((a13^d3), 28); + b1 = ROL64((a14^d4), 20); + a10 = b0 ^((~b1)& b2 ); + a11 = b1 ^((~b2)& b3 ); + a12 = b2 ^((~b3)& b4 ); + a13 = b3 ^((~b4)& b0 ); + a14 = b4 ^((~b0)& b1 ); - B4 = ROL64((A20^D0), 18); - B0 = ROL64((A21^D1), 1); - B1 = ROL64((A22^D2), 6); - B2 = ROL64((A23^D3), 25); - B3 = ROL64((A24^D4), 8); - A20 = B0 ^((~B1)& B2 ); - A21 = B1 ^((~B2)& B3 ); - A22 = B2 ^((~B3)& B4 ); - A23 = B3 ^((~B4)& B0 ); - A24 = B4 ^((~B0)& B1 ); + b4 = ROL64((a20^d0), 18); + b0 = ROL64((a21^d1), 1); + b1 = ROL64((a22^d2), 6); + b2 = ROL64((a23^d3), 25); + b3 = ROL64((a24^d4), 8); + a20 = b0 ^((~b1)& b2 ); + a21 = b1 ^((~b2)& b3 ); + a22 = b2 ^((~b3)& b4 ); + a23 = b3 ^((~b4)& b0 ); + a24 = b4 ^((~b0)& b1 ); - B1 = ROL64((A30^D0), 36); - B2 = ROL64((A31^D1), 10); - B3 = ROL64((A32^D2), 15); - B4 = ROL64((A33^D3), 56); - B0 = ROL64((A34^D4), 27); - A30 = B0 ^((~B1)& B2 ); - A31 = B1 ^((~B2)& B3 ); - A32 = B2 ^((~B3)& B4 ); - A33 = B3 ^((~B4)& B0 ); - A34 = B4 ^((~B0)& B1 ); + b1 = ROL64((a30^d0), 36); + b2 = ROL64((a31^d1), 10); + b3 = ROL64((a32^d2), 15); + b4 = ROL64((a33^d3), 56); + b0 = ROL64((a34^d4), 27); + a30 = b0 ^((~b1)& b2 ); + a31 = b1 ^((~b2)& b3 ); + a32 = b2 ^((~b3)& b4 ); + a33 = b3 ^((~b4)& b0 ); + a34 = b4 ^((~b0)& b1 ); - B3 = ROL64((A40^D0), 41); - B4 = ROL64((A41^D1), 2); - B0 = ROL64((A42^D2), 62); - B1 = ROL64((A43^D3), 55); - B2 = ROL64((A44^D4), 39); - A40 = B0 ^((~B1)& B2 ); - A41 = B1 ^((~B2)& B3 ); - A42 = B2 ^((~B3)& B4 ); - A43 = B3 ^((~B4)& B0 ); - A44 = B4 ^((~B0)& B1 ); + b3 = ROL64((a40^d0), 41); + b4 = ROL64((a41^d1), 2); + b0 = ROL64((a42^d2), 62); + b1 = ROL64((a43^d3), 55); + b2 = ROL64((a44^d4), 39); + a40 = b0 ^((~b1)& b2 ); + a41 = b1 ^((~b2)& b3 ); + a42 = b2 ^((~b3)& b4 ); + a43 = b3 ^((~b4)& b0 ); + a44 = b4 ^((~b0)& b1 ); } } @@ -1499,7 +1992,7 @@ #ifdef _WIN32 -__declspec(dllexport) + #endif int sqlite3_shathree_init( sqlite3 *db, @@ -1541,29 +2034,122 @@ ****************************************************************************** ** ** This SQLite extension implements SQL functions readfile() and -** writefile(). +** writefile(), and eponymous virtual type "fsdir". +** +** WRITEFILE(FILE, DATA [, MODE [, MTIME]]): +** +** If neither of the optional arguments is present, then this UDF +** function writes blob DATA to file FILE. If successful, the number +** of bytes written is returned. If an error occurs, NULL is returned. +** +** If the first option argument - MODE - is present, then it must +** be passed an integer value that corresponds to a POSIX mode +** value (file type + permissions, as returned in the stat.st_mode +** field by the stat() system call). Three types of files may +** be written/created: +** +** regular files: (mode & 0170000)==0100000 +** symbolic links: (mode & 0170000)==0120000 +** directories: (mode & 0170000)==0040000 +** +** For a directory, the DATA is ignored. For a symbolic link, it is +** interpreted as text and used as the target of the link. For a +** regular file, it is interpreted as a blob and written into the +** named file. Regardless of the type of file, its permissions are +** set to (mode & 0777) before returning. +** +** If the optional MTIME argument is present, then it is interpreted +** as an integer - the number of seconds since the unix epoch. The +** modification-time of the target file is set to this value before +** returning. +** +** If three or more arguments are passed to this function and an +** error is encountered, an exception is raised. +** +** READFILE(FILE): +** +** Read and return the contents of file FILE (type blob) from disk. +** +** FSDIR: +** +** Used as follows: +** +** SELECT * FROM fsdir($path [, $dir]); +** +** Parameter $path is an absolute or relative pathname. If the file that it +** refers to does not exist, it is an error. If the path refers to a regular +** file or symbolic link, it returns a single row. Or, if the path refers +** to a directory, it returns one row for the directory, and one row for each +** file within the hierarchy rooted at $path. +** +** Each row has the following columns: +** +** name: Path to file or directory (text value). +** mode: Value of stat.st_mode for directory entry (an integer). +** mtime: Value of stat.st_mtime for directory entry (an integer). +** data: For a regular file, a blob containing the file data. For a +** symlink, a text value containing the text of the link. For a +** directory, NULL. +** +** If a non-NULL value is specified for the optional $dir parameter and +** $path is a relative path, then $path is interpreted relative to $dir. +** And the paths returned in the "name" column of the table are also +** relative to directory $dir. */ SQLITE_EXTENSION_INIT1 #include +#include +#include +#include +#include +#include +#if !defined(_WIN32) && !defined(WIN32) +# include +# include +# include +# include +#else +# include "windows.h" +# include +# include +/* # include "test_windirent.h" */ +# define dirent DIRENT +# ifndef chmod +# define chmod _chmod +# endif +# ifndef stat +# define stat _stat +# endif +# define mkdir(path,mode) _mkdir(path) +# define lstat(path,buf) stat(path,buf) +#endif +#include +#include + + /* -** Implementation of the "readfile(X)" SQL function. The entire content -** of the file named X is read and returned as a BLOB. NULL is returned -** if the file does not exist or is unreadable. +** Structure of the fsdir() table-valued function */ -static void readfileFunc( - sqlite3_context *context, - int argc, - sqlite3_value **argv -){ - const char *zName; + /* 0 1 2 3 4 5 */ +#define FSDIR_SCHEMA "(name,mode,mtime,data,path HIDDEN,dir HIDDEN)" +#define FSDIR_COLUMN_NAME 0 /* Name of the file */ +#define FSDIR_COLUMN_MODE 1 /* Access mode */ +#define FSDIR_COLUMN_MTIME 2 /* Last modification time */ +#define FSDIR_COLUMN_DATA 3 /* File content */ +#define FSDIR_COLUMN_PATH 4 /* Path to top of search */ +#define FSDIR_COLUMN_DIR 5 /* Path is relative to this directory */ + + +/* +** Set the result stored by context ctx to a blob containing the +** contents of file zName. +*/ +static void readFileContents(sqlite3_context *ctx, const char *zName){ FILE *in; long nIn; void *pBuf; - (void)(argc); /* Unused parameter */ - zName = (const char*)sqlite3_value_text(argv[0]); - if( zName==0 ) return; in = fopen(zName, "rb"); if( in==0 ) return; fseek(in, 0, SEEK_END); @@ -1571,7 +2157,7 @@ rewind(in); pBuf = sqlite3_malloc( nIn ); if( pBuf && 1==fread(pBuf, nIn, 1, in) ){ - sqlite3_result_blob(context, pBuf, nIn, sqlite3_free); + sqlite3_result_blob(ctx, pBuf, nIn, sqlite3_free); }else{ sqlite3_free(pBuf); } @@ -1579,39 +2165,807 @@ } /* -** Implementation of the "writefile(X,Y)" SQL function. The argument Y -** is written into file X. The number of bytes written is returned. Or -** NULL is returned if something goes wrong, such as being unable to open -** file X for writing. +** Implementation of the "readfile(X)" SQL function. The entire content +** of the file named X is read and returned as a BLOB. NULL is returned +** if the file does not exist or is unreadable. */ +static void readfileFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + const char *zName; + (void)(argc); /* Unused parameter */ + zName = (const char*)sqlite3_value_text(argv[0]); + if( zName==0 ) return; + readFileContents(context, zName); +} + +/* +** Set the error message contained in context ctx to the results of +** vprintf(zFmt, ...). +*/ +static void ctxErrorMsg(sqlite3_context *ctx, const char *zFmt, ...){ + char *zMsg = 0; + va_list ap; + va_start(ap, zFmt); + zMsg = sqlite3_vmprintf(zFmt, ap); + sqlite3_result_error(ctx, zMsg, -1); + sqlite3_free(zMsg); + va_end(ap); +} + +#if defined(_WIN32) +/* +** This function is designed to convert a Win32 FILETIME structure into the +** number of seconds since the Unix Epoch (1970-01-01 00:00:00 UTC). +*/ +static sqlite3_uint64 fileTimeToUnixTime( + LPFILETIME pFileTime +){ + SYSTEMTIME epochSystemTime; + ULARGE_INTEGER epochIntervals; + FILETIME epochFileTime; + ULARGE_INTEGER fileIntervals; + + memset(&epochSystemTime, 0, sizeof(SYSTEMTIME)); + epochSystemTime.wYear = 1970; + epochSystemTime.wMonth = 1; + epochSystemTime.wDay = 1; + SystemTimeToFileTime(&epochSystemTime, &epochFileTime); + epochIntervals.LowPart = epochFileTime.dwLowDateTime; + epochIntervals.HighPart = epochFileTime.dwHighDateTime; + + fileIntervals.LowPart = pFileTime->dwLowDateTime; + fileIntervals.HighPart = pFileTime->dwHighDateTime; + + return (fileIntervals.QuadPart - epochIntervals.QuadPart) / 10000000; +} + +/* +** This function attempts to normalize the time values found in the stat() +** buffer to UTC. This is necessary on Win32, where the runtime library +** appears to return these values as local times. +*/ +static void statTimesToUtc( + const char *zPath, + struct stat *pStatBuf +){ + HANDLE hFindFile; + WIN32_FIND_DATAW fd; + LPWSTR zUnicodeName; + extern LPWSTR sqlite3_win32_utf8_to_unicode(const char*); + zUnicodeName = sqlite3_win32_utf8_to_unicode(zPath); + if( zUnicodeName ){ + memset(&fd, 0, sizeof(WIN32_FIND_DATAW)); + hFindFile = FindFirstFileW(zUnicodeName, &fd); + if( hFindFile!=NULL ){ + pStatBuf->st_ctime = (time_t)fileTimeToUnixTime(&fd.ftCreationTime); + pStatBuf->st_atime = (time_t)fileTimeToUnixTime(&fd.ftLastAccessTime); + pStatBuf->st_mtime = (time_t)fileTimeToUnixTime(&fd.ftLastWriteTime); + FindClose(hFindFile); + } + sqlite3_free(zUnicodeName); + } +} +#endif + +/* +** This function is used in place of stat(). On Windows, special handling +** is required in order for the included time to be returned as UTC. On all +** other systems, this function simply calls stat(). +*/ +static int fileStat( + const char *zPath, + struct stat *pStatBuf +){ +#if defined(_WIN32) + int rc = stat(zPath, pStatBuf); + if( rc==0 ) statTimesToUtc(zPath, pStatBuf); + return rc; +#else + return stat(zPath, pStatBuf); +#endif +} + +/* +** This function is used in place of lstat(). On Windows, special handling +** is required in order for the included time to be returned as UTC. On all +** other systems, this function simply calls lstat(). +*/ +static int fileLinkStat( + const char *zPath, + struct stat *pStatBuf +){ +#if defined(_WIN32) + int rc = lstat(zPath, pStatBuf); + if( rc==0 ) statTimesToUtc(zPath, pStatBuf); + return rc; +#else + return lstat(zPath, pStatBuf); +#endif +} + +/* +** Argument zFile is the name of a file that will be created and/or written +** by SQL function writefile(). This function ensures that the directory +** zFile will be written to exists, creating it if required. The permissions +** for any path components created by this function are set to (mode&0777). +** +** If an OOM condition is encountered, SQLITE_NOMEM is returned. Otherwise, +** SQLITE_OK is returned if the directory is successfully created, or +** SQLITE_ERROR otherwise. +*/ +static int makeDirectory( + const char *zFile, + mode_t mode +){ + char *zCopy = sqlite3_mprintf("%s", zFile); + int rc = SQLITE_OK; + + if( zCopy==0 ){ + rc = SQLITE_NOMEM; + }else{ + int nCopy = (int)strlen(zCopy); + int i = 1; + + while( rc==SQLITE_OK ){ + struct stat sStat; + int rc2; + + for(; zCopy[i]!='/' && i=0 ){ +#if defined(_WIN32) + /* Windows */ + FILETIME lastAccess; + FILETIME lastWrite; + SYSTEMTIME currentTime; + LONGLONG intervals; + HANDLE hFile; + LPWSTR zUnicodeName; + extern LPWSTR sqlite3_win32_utf8_to_unicode(const char*); + + GetSystemTime(¤tTime); + SystemTimeToFileTime(¤tTime, &lastAccess); + intervals = Int32x32To64(mtime, 10000000) + 116444736000000000; + lastWrite.dwLowDateTime = (DWORD)intervals; + lastWrite.dwHighDateTime = intervals >> 32; + zUnicodeName = sqlite3_win32_utf8_to_unicode(zFile); + if( zUnicodeName==0 ){ + return 1; + } + hFile = CreateFileW( + zUnicodeName, FILE_WRITE_ATTRIBUTES, 0, NULL, OPEN_EXISTING, + FILE_FLAG_BACKUP_SEMANTICS, NULL + ); + sqlite3_free(zUnicodeName); + if( hFile!=INVALID_HANDLE_VALUE ){ + BOOL bResult = SetFileTime(hFile, NULL, &lastAccess, &lastWrite); + CloseHandle(hFile); + return !bResult; + }else{ + return 1; + } +#elif defined(AT_FDCWD) && 0 /* utimensat() is not universally available */ + /* Recent unix */ + struct timespec times[2]; + times[0].tv_nsec = times[1].tv_nsec = 0; + times[0].tv_sec = time(0); + times[1].tv_sec = mtime; + if( utimensat(AT_FDCWD, zFile, times, AT_SYMLINK_NOFOLLOW) ){ + return 1; + } +#else + /* Legacy unix */ + struct timeval times[2]; + times[0].tv_usec = times[1].tv_usec = 0; + times[0].tv_sec = time(0); + times[1].tv_sec = mtime; + if( utimes(zFile, times) ){ + return 1; + } +#endif + } + + return 0; +} + +/* +** Implementation of the "writefile(W,X[,Y[,Z]]])" SQL function. +** Refer to header comments at the top of this file for details. +*/ static void writefileFunc( sqlite3_context *context, int argc, sqlite3_value **argv ){ - FILE *out; - const char *z; - sqlite3_int64 rc; const char *zFile; + mode_t mode = 0; + int res; + sqlite3_int64 mtime = -1; - (void)(argc); /* Unused parameter */ + if( argc<2 || argc>4 ){ + sqlite3_result_error(context, + "wrong number of arguments to function writefile()", -1 + ); + return; + } + zFile = (const char*)sqlite3_value_text(argv[0]); if( zFile==0 ) return; - out = fopen(zFile, "wb"); - if( out==0 ) return; - z = (const char*)sqlite3_value_blob(argv[1]); - if( z==0 ){ - rc = 0; + if( argc>=3 ){ + mode = (mode_t)sqlite3_value_int(argv[2]); + } + if( argc==4 ){ + mtime = sqlite3_value_int64(argv[3]); + } + + res = writeFile(context, zFile, argv[1], mode, mtime); + if( res==1 && errno==ENOENT ){ + if( makeDirectory(zFile, mode)==SQLITE_OK ){ + res = writeFile(context, zFile, argv[1], mode, mtime); + } + } + + if( argc>2 && res!=0 ){ + if( S_ISLNK(mode) ){ + ctxErrorMsg(context, "failed to create symlink: %s", zFile); + }else if( S_ISDIR(mode) ){ + ctxErrorMsg(context, "failed to create directory: %s", zFile); + }else{ + ctxErrorMsg(context, "failed to write file: %s", zFile); + } + } +} + +/* +** SQL function: lsmode(MODE) +** +** Given a numberic st_mode from stat(), convert it into a human-readable +** text string in the style of "ls -l". +*/ +static void lsModeFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + int i; + int iMode = sqlite3_value_int(argv[0]); + char z[16]; + (void)argc; + if( S_ISLNK(iMode) ){ + z[0] = 'l'; + }else if( S_ISREG(iMode) ){ + z[0] = '-'; + }else if( S_ISDIR(iMode) ){ + z[0] = 'd'; }else{ - rc = fwrite(z, 1, sqlite3_value_bytes(argv[1]), out); + z[0] = '?'; } - fclose(out); - sqlite3_result_int64(context, rc); + for(i=0; i<3; i++){ + int m = (iMode >> ((2-i)*3)); + char *a = &z[1 + i*3]; + a[0] = (m & 0x4) ? 'r' : '-'; + a[1] = (m & 0x2) ? 'w' : '-'; + a[2] = (m & 0x1) ? 'x' : '-'; + } + z[10] = '\0'; + sqlite3_result_text(context, z, -1, SQLITE_TRANSIENT); } +#ifndef SQLITE_OMIT_VIRTUALTABLE +/* +** Cursor type for recursively iterating through a directory structure. +*/ +typedef struct fsdir_cursor fsdir_cursor; +typedef struct FsdirLevel FsdirLevel; + +struct FsdirLevel { + DIR *pDir; /* From opendir() */ + char *zDir; /* Name of directory (nul-terminated) */ +}; + +struct fsdir_cursor { + sqlite3_vtab_cursor base; /* Base class - must be first */ + + int nLvl; /* Number of entries in aLvl[] array */ + int iLvl; /* Index of current entry */ + FsdirLevel *aLvl; /* Hierarchy of directories being traversed */ + + const char *zBase; + int nBase; + + struct stat sStat; /* Current lstat() results */ + char *zPath; /* Path to current entry */ + sqlite3_int64 iRowid; /* Current rowid */ +}; + +typedef struct fsdir_tab fsdir_tab; +struct fsdir_tab { + sqlite3_vtab base; /* Base class - must be first */ +}; + +/* +** Construct a new fsdir virtual table object. +*/ +static int fsdirConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + fsdir_tab *pNew = 0; + int rc; + (void)pAux; + (void)argc; + (void)argv; + (void)pzErr; + rc = sqlite3_declare_vtab(db, "CREATE TABLE x" FSDIR_SCHEMA); + if( rc==SQLITE_OK ){ + pNew = (fsdir_tab*)sqlite3_malloc( sizeof(*pNew) ); + if( pNew==0 ) return SQLITE_NOMEM; + memset(pNew, 0, sizeof(*pNew)); + } + *ppVtab = (sqlite3_vtab*)pNew; + return rc; +} + +/* +** This method is the destructor for fsdir vtab objects. +*/ +static int fsdirDisconnect(sqlite3_vtab *pVtab){ + sqlite3_free(pVtab); + return SQLITE_OK; +} + +/* +** Constructor for a new fsdir_cursor object. +*/ +static int fsdirOpen(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCursor){ + fsdir_cursor *pCur; + (void)p; + pCur = sqlite3_malloc( sizeof(*pCur) ); + if( pCur==0 ) return SQLITE_NOMEM; + memset(pCur, 0, sizeof(*pCur)); + pCur->iLvl = -1; + *ppCursor = &pCur->base; + return SQLITE_OK; +} + +/* +** Reset a cursor back to the state it was in when first returned +** by fsdirOpen(). +*/ +static void fsdirResetCursor(fsdir_cursor *pCur){ + int i; + for(i=0; i<=pCur->iLvl; i++){ + FsdirLevel *pLvl = &pCur->aLvl[i]; + if( pLvl->pDir ) closedir(pLvl->pDir); + sqlite3_free(pLvl->zDir); + } + sqlite3_free(pCur->zPath); + sqlite3_free(pCur->aLvl); + pCur->aLvl = 0; + pCur->zPath = 0; + pCur->zBase = 0; + pCur->nBase = 0; + pCur->nLvl = 0; + pCur->iLvl = -1; + pCur->iRowid = 1; +} + +/* +** Destructor for an fsdir_cursor. +*/ +static int fsdirClose(sqlite3_vtab_cursor *cur){ + fsdir_cursor *pCur = (fsdir_cursor*)cur; + + fsdirResetCursor(pCur); + sqlite3_free(pCur); + return SQLITE_OK; +} + +/* +** Set the error message for the virtual table associated with cursor +** pCur to the results of vprintf(zFmt, ...). +*/ +static void fsdirSetErrmsg(fsdir_cursor *pCur, const char *zFmt, ...){ + va_list ap; + va_start(ap, zFmt); + pCur->base.pVtab->zErrMsg = sqlite3_vmprintf(zFmt, ap); + va_end(ap); +} + + +/* +** Advance an fsdir_cursor to its next row of output. +*/ +static int fsdirNext(sqlite3_vtab_cursor *cur){ + fsdir_cursor *pCur = (fsdir_cursor*)cur; + mode_t m = pCur->sStat.st_mode; + + pCur->iRowid++; + if( S_ISDIR(m) ){ + /* Descend into this directory */ + int iNew = pCur->iLvl + 1; + FsdirLevel *pLvl; + if( iNew>=pCur->nLvl ){ + int nNew = iNew+1; + int nByte = nNew*sizeof(FsdirLevel); + FsdirLevel *aNew = (FsdirLevel*)sqlite3_realloc(pCur->aLvl, nByte); + if( aNew==0 ) return SQLITE_NOMEM; + memset(&aNew[pCur->nLvl], 0, sizeof(FsdirLevel)*(nNew-pCur->nLvl)); + pCur->aLvl = aNew; + pCur->nLvl = nNew; + } + pCur->iLvl = iNew; + pLvl = &pCur->aLvl[iNew]; + + pLvl->zDir = pCur->zPath; + pCur->zPath = 0; + pLvl->pDir = opendir(pLvl->zDir); + if( pLvl->pDir==0 ){ + fsdirSetErrmsg(pCur, "cannot read directory: %s", pCur->zPath); + return SQLITE_ERROR; + } + } + + while( pCur->iLvl>=0 ){ + FsdirLevel *pLvl = &pCur->aLvl[pCur->iLvl]; + struct dirent *pEntry = readdir(pLvl->pDir); + if( pEntry ){ + if( pEntry->d_name[0]=='.' ){ + if( pEntry->d_name[1]=='.' && pEntry->d_name[2]=='\0' ) continue; + if( pEntry->d_name[1]=='\0' ) continue; + } + sqlite3_free(pCur->zPath); + pCur->zPath = sqlite3_mprintf("%s/%s", pLvl->zDir, pEntry->d_name); + if( pCur->zPath==0 ) return SQLITE_NOMEM; + if( fileLinkStat(pCur->zPath, &pCur->sStat) ){ + fsdirSetErrmsg(pCur, "cannot stat file: %s", pCur->zPath); + return SQLITE_ERROR; + } + return SQLITE_OK; + } + closedir(pLvl->pDir); + sqlite3_free(pLvl->zDir); + pLvl->pDir = 0; + pLvl->zDir = 0; + pCur->iLvl--; + } + + /* EOF */ + sqlite3_free(pCur->zPath); + pCur->zPath = 0; + return SQLITE_OK; +} + +/* +** Return values of columns for the row at which the series_cursor +** is currently pointing. +*/ +static int fsdirColumn( + sqlite3_vtab_cursor *cur, /* The cursor */ + sqlite3_context *ctx, /* First argument to sqlite3_result_...() */ + int i /* Which column to return */ +){ + fsdir_cursor *pCur = (fsdir_cursor*)cur; + switch( i ){ + case FSDIR_COLUMN_NAME: { + sqlite3_result_text(ctx, &pCur->zPath[pCur->nBase], -1, SQLITE_TRANSIENT); + break; + } + + case FSDIR_COLUMN_MODE: + sqlite3_result_int64(ctx, pCur->sStat.st_mode); + break; + + case FSDIR_COLUMN_MTIME: + sqlite3_result_int64(ctx, pCur->sStat.st_mtime); + break; + + case FSDIR_COLUMN_DATA: { + mode_t m = pCur->sStat.st_mode; + if( S_ISDIR(m) ){ + sqlite3_result_null(ctx); +#if !defined(_WIN32) && !defined(WIN32) + }else if( S_ISLNK(m) ){ + char aStatic[64]; + char *aBuf = aStatic; + int nBuf = 64; + int n; + + while( 1 ){ + n = readlink(pCur->zPath, aBuf, nBuf); + if( nzPath); + } + } + case FSDIR_COLUMN_PATH: + default: { + /* The FSDIR_COLUMN_PATH and FSDIR_COLUMN_DIR are input parameters. + ** always return their values as NULL */ + break; + } + } + return SQLITE_OK; +} + +/* +** Return the rowid for the current row. In this implementation, the +** first row returned is assigned rowid value 1, and each subsequent +** row a value 1 more than that of the previous. +*/ +static int fsdirRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ + fsdir_cursor *pCur = (fsdir_cursor*)cur; + *pRowid = pCur->iRowid; + return SQLITE_OK; +} + +/* +** Return TRUE if the cursor has been moved off of the last +** row of output. +*/ +static int fsdirEof(sqlite3_vtab_cursor *cur){ + fsdir_cursor *pCur = (fsdir_cursor*)cur; + return (pCur->zPath==0); +} + +/* +** xFilter callback. +** +** idxNum==1 PATH parameter only +** idxNum==2 Both PATH and DIR supplied +*/ +static int fsdirFilter( + sqlite3_vtab_cursor *cur, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + const char *zDir = 0; + fsdir_cursor *pCur = (fsdir_cursor*)cur; + (void)idxStr; + fsdirResetCursor(pCur); + + if( idxNum==0 ){ + fsdirSetErrmsg(pCur, "table function fsdir requires an argument"); + return SQLITE_ERROR; + } + + assert( argc==idxNum && (argc==1 || argc==2) ); + zDir = (const char*)sqlite3_value_text(argv[0]); + if( zDir==0 ){ + fsdirSetErrmsg(pCur, "table function fsdir requires a non-NULL argument"); + return SQLITE_ERROR; + } + if( argc==2 ){ + pCur->zBase = (const char*)sqlite3_value_text(argv[1]); + } + if( pCur->zBase ){ + pCur->nBase = (int)strlen(pCur->zBase)+1; + pCur->zPath = sqlite3_mprintf("%s/%s", pCur->zBase, zDir); + }else{ + pCur->zPath = sqlite3_mprintf("%s", zDir); + } + + if( pCur->zPath==0 ){ + return SQLITE_NOMEM; + } + if( fileLinkStat(pCur->zPath, &pCur->sStat) ){ + fsdirSetErrmsg(pCur, "cannot stat file: %s", pCur->zPath); + return SQLITE_ERROR; + } + + return SQLITE_OK; +} + +/* +** SQLite will invoke this method one or more times while planning a query +** that uses the generate_series virtual table. This routine needs to create +** a query plan for each invocation and compute an estimated cost for that +** plan. +** +** In this implementation idxNum is used to represent the +** query plan. idxStr is unused. +** +** The query plan is represented by values of idxNum: +** +** (1) The path value is supplied by argv[0] +** (2) Path is in argv[0] and dir is in argv[1] +*/ +static int fsdirBestIndex( + sqlite3_vtab *tab, + sqlite3_index_info *pIdxInfo +){ + int i; /* Loop over constraints */ + int idxPath = -1; /* Index in pIdxInfo->aConstraint of PATH= */ + int idxDir = -1; /* Index in pIdxInfo->aConstraint of DIR= */ + int seenPath = 0; /* True if an unusable PATH= constraint is seen */ + int seenDir = 0; /* True if an unusable DIR= constraint is seen */ + const struct sqlite3_index_constraint *pConstraint; + + (void)tab; + pConstraint = pIdxInfo->aConstraint; + for(i=0; inConstraint; i++, pConstraint++){ + if( pConstraint->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue; + switch( pConstraint->iColumn ){ + case FSDIR_COLUMN_PATH: { + if( pConstraint->usable ){ + idxPath = i; + seenPath = 0; + }else if( idxPath<0 ){ + seenPath = 1; + } + break; + } + case FSDIR_COLUMN_DIR: { + if( pConstraint->usable ){ + idxDir = i; + seenDir = 0; + }else if( idxDir<0 ){ + seenDir = 1; + } + break; + } + } + } + if( seenPath || seenDir ){ + /* If input parameters are unusable, disallow this plan */ + return SQLITE_CONSTRAINT; + } + + if( idxPath<0 ){ + pIdxInfo->idxNum = 0; + /* The pIdxInfo->estimatedCost should have been initialized to a huge + ** number. Leave it unchanged. */ + pIdxInfo->estimatedRows = 0x7fffffff; + }else{ + pIdxInfo->aConstraintUsage[idxPath].omit = 1; + pIdxInfo->aConstraintUsage[idxPath].argvIndex = 1; + if( idxDir>=0 ){ + pIdxInfo->aConstraintUsage[idxDir].omit = 1; + pIdxInfo->aConstraintUsage[idxDir].argvIndex = 2; + pIdxInfo->idxNum = 2; + pIdxInfo->estimatedCost = 10.0; + }else{ + pIdxInfo->idxNum = 1; + pIdxInfo->estimatedCost = 100.0; + } + } + + return SQLITE_OK; +} + +/* +** Register the "fsdir" virtual table. +*/ +static int fsdirRegister(sqlite3 *db){ + static sqlite3_module fsdirModule = { + 0, /* iVersion */ + 0, /* xCreate */ + fsdirConnect, /* xConnect */ + fsdirBestIndex, /* xBestIndex */ + fsdirDisconnect, /* xDisconnect */ + 0, /* xDestroy */ + fsdirOpen, /* xOpen - open a cursor */ + fsdirClose, /* xClose - close a cursor */ + fsdirFilter, /* xFilter - configure scan constraints */ + fsdirNext, /* xNext - advance a cursor */ + fsdirEof, /* xEof - check for end of scan */ + fsdirColumn, /* xColumn - read data */ + fsdirRowid, /* xRowid - read data */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ + 0, /* xShadowName */ + }; + + int rc = sqlite3_create_module(db, "fsdir", &fsdirModule, 0); + return rc; +} +#else /* SQLITE_OMIT_VIRTUALTABLE */ +# define fsdirRegister(x) SQLITE_OK +#endif + #ifdef _WIN32 -__declspec(dllexport) + #endif int sqlite3_fileio_init( sqlite3 *db, @@ -1624,9 +2978,16 @@ rc = sqlite3_create_function(db, "readfile", 1, SQLITE_UTF8, 0, readfileFunc, 0, 0); if( rc==SQLITE_OK ){ - rc = sqlite3_create_function(db, "writefile", 2, SQLITE_UTF8, 0, + rc = sqlite3_create_function(db, "writefile", -1, SQLITE_UTF8, 0, writefileFunc, 0, 0); } + if( rc==SQLITE_OK ){ + rc = sqlite3_create_function(db, "lsmode", 1, SQLITE_UTF8, 0, + lsModeFunc, 0, 0); + } + if( rc==SQLITE_OK ){ + rc = fsdirRegister(db); + } return rc; } @@ -1695,6 +3056,7 @@ char *zPrefix; /* The prefix for the word we want to complete */ char *zLine; /* The whole that we want to complete */ const char *zCurrentRow; /* Current output row */ + int szRow; /* Length of the zCurrentRow string */ sqlite3_stmt *pStmt; /* Current statement */ sqlite3_int64 iRowid; /* The rowid */ int ePhase; /* Current phase */ @@ -1711,7 +3073,7 @@ #define COMPLETION_INDEXES 5 #define COMPLETION_TRIGGERS 6 #define COMPLETION_DATABASES 7 -#define COMPLETION_TABLES 8 +#define COMPLETION_TABLES 8 /* Also VIEWs and TRIGGERs */ #define COMPLETION_COLUMNS 9 #define COMPLETION_MODULES 10 #define COMPLETION_EOF 11 @@ -1808,32 +3170,6 @@ } /* -** All SQL keywords understood by SQLite -*/ -static const char *completionKwrds[] = { - "ABORT", "ACTION", "ADD", "AFTER", "ALL", "ALTER", "ANALYZE", "AND", "AS", - "ASC", "ATTACH", "AUTOINCREMENT", "BEFORE", "BEGIN", "BETWEEN", "BY", - "CASCADE", "CASE", "CAST", "CHECK", "COLLATE", "COLUMN", "COMMIT", - "CONFLICT", "CONSTRAINT", "CREATE", "CROSS", "CURRENT_DATE", - "CURRENT_TIME", "CURRENT_TIMESTAMP", "DATABASE", "DEFAULT", "DEFERRABLE", - "DEFERRED", "DELETE", "DESC", "DETACH", "DISTINCT", "DROP", "EACH", - "ELSE", "END", "ESCAPE", "EXCEPT", "EXCLUSIVE", "EXISTS", "EXPLAIN", - "FAIL", "FOR", "FOREIGN", "FROM", "FULL", "GLOB", "GROUP", "HAVING", "IF", - "IGNORE", "IMMEDIATE", "IN", "INDEX", "INDEXED", "INITIALLY", "INNER", - "INSERT", "INSTEAD", "INTERSECT", "INTO", "IS", "ISNULL", "JOIN", "KEY", - "LEFT", "LIKE", "LIMIT", "MATCH", "NATURAL", "NO", "NOT", "NOTNULL", - "NULL", "OF", "OFFSET", "ON", "OR", "ORDER", "OUTER", "PLAN", "PRAGMA", - "PRIMARY", "QUERY", "RAISE", "RECURSIVE", "REFERENCES", "REGEXP", - "REINDEX", "RELEASE", "RENAME", "REPLACE", "RESTRICT", "RIGHT", - "ROLLBACK", "ROW", "SAVEPOINT", "SELECT", "SET", "TABLE", "TEMP", - "TEMPORARY", "THEN", "TO", "TRANSACTION", "TRIGGER", "UNION", "UNIQUE", - "UPDATE", "USING", "VACUUM", "VALUES", "VIEW", "VIRTUAL", "WHEN", "WHERE", - "WITH", "WITHOUT", -}; -#define completionKwCount \ - (int)(sizeof(completionKwrds)/sizeof(completionKwrds[0])) - -/* ** Advance a completion_cursor to its next row of output. ** ** The ->ePhase, ->j, and ->pStmt fields of the completion_cursor object @@ -1855,11 +3191,11 @@ while( pCur->ePhase!=COMPLETION_EOF ){ switch( pCur->ePhase ){ case COMPLETION_KEYWORDS: { - if( pCur->j >= completionKwCount ){ + if( pCur->j >= sqlite3_keyword_count() ){ pCur->zCurrentRow = 0; pCur->ePhase = COMPLETION_DATABASES; }else{ - pCur->zCurrentRow = completionKwrds[pCur->j++]; + sqlite3_keyword_name(pCur->j++, &pCur->zCurrentRow, &pCur->szRow); } iCol = -1; break; @@ -1883,8 +3219,7 @@ const char *zDb = (const char*)sqlite3_column_text(pS2, 1); zSql = sqlite3_mprintf( "%z%s" - "SELECT name FROM \"%w\".sqlite_master" - " WHERE type='table'", + "SELECT name FROM \"%w\".sqlite_master", zSql, zSep, zDb ); if( zSql==0 ) return SQLITE_NOMEM; @@ -1932,6 +3267,7 @@ if( sqlite3_step(pCur->pStmt)==SQLITE_ROW ){ /* Extract the next row of content */ pCur->zCurrentRow = (const char*)sqlite3_column_text(pCur->pStmt, iCol); + pCur->szRow = sqlite3_column_bytes(pCur->pStmt, iCol); }else{ /* When all rows are finished, advance to the next phase */ sqlite3_finalize(pCur->pStmt); @@ -1941,7 +3277,9 @@ } } if( pCur->nPrefix==0 ) break; - if( sqlite3_strnicmp(pCur->zPrefix, pCur->zCurrentRow, pCur->nPrefix)==0 ){ + if( pCur->nPrefix<=pCur->szRow + && sqlite3_strnicmp(pCur->zPrefix, pCur->zCurrentRow, pCur->nPrefix)==0 + ){ break; } } @@ -1961,7 +3299,7 @@ completion_cursor *pCur = (completion_cursor*)cur; switch( i ){ case COMPLETION_COLUMN_CANDIDATE: { - sqlite3_result_text(ctx, pCur->zCurrentRow, -1, SQLITE_TRANSIENT); + sqlite3_result_text(ctx, pCur->zCurrentRow, pCur->szRow,SQLITE_TRANSIENT); break; } case COMPLETION_COLUMN_PREFIX: { @@ -2021,7 +3359,7 @@ pCur->zPrefix = sqlite3_mprintf("%s", sqlite3_value_text(argv[iArg])); if( pCur->zPrefix==0 ) return SQLITE_NOMEM; } - iArg++; + iArg = 1; } if( idxNum & 2 ){ pCur->nLine = sqlite3_value_bytes(argv[iArg]); @@ -2029,7 +3367,6 @@ pCur->zLine = sqlite3_mprintf("%s", sqlite3_value_text(argv[iArg])); if( pCur->zLine==0 ) return SQLITE_NOMEM; } - iArg++; } if( pCur->zLine!=0 && pCur->zPrefix==0 ){ int i = pCur->nLine; @@ -2125,7 +3462,8 @@ 0, /* xRename */ 0, /* xSavepoint */ 0, /* xRelease */ - 0 /* xRollbackTo */ + 0, /* xRollbackTo */ + 0 /* xShadowName */ }; #endif /* SQLITE_OMIT_VIRTUALTABLE */ @@ -2139,7 +3477,7 @@ } #ifdef _WIN32 -__declspec(dllexport) + #endif int sqlite3_completion_init( sqlite3 *db, @@ -2156,7 +3494,5004 @@ } /************************* End ../ext/misc/completion.c ********************/ +/************************* Begin ../ext/misc/appendvfs.c ******************/ +/* +** 2017-10-20 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file implements a VFS shim that allows an SQLite database to be +** appended onto the end of some other file, such as an executable. +** +** A special record must appear at the end of the file that identifies the +** file as an appended database and provides an offset to page 1. For +** best performance page 1 should be located at a disk page boundary, though +** that is not required. +** +** When opening a database using this VFS, the connection might treat +** the file as an ordinary SQLite database, or it might treat is as a +** database appended onto some other file. Here are the rules: +** +** (1) When opening a new empty file, that file is treated as an ordinary +** database. +** +** (2) When opening a file that begins with the standard SQLite prefix +** string "SQLite format 3", that file is treated as an ordinary +** database. +** +** (3) When opening a file that ends with the appendvfs trailer string +** "Start-Of-SQLite3-NNNNNNNN" that file is treated as an appended +** database. +** +** (4) If none of the above apply and the SQLITE_OPEN_CREATE flag is +** set, then a new database is appended to the already existing file. +** +** (5) Otherwise, SQLITE_CANTOPEN is returned. +** +** To avoid unnecessary complications with the PENDING_BYTE, the size of +** the file containing the database is limited to 1GB. This VFS will refuse +** to read or write past the 1GB mark. This restriction might be lifted in +** future versions. For now, if you need a large database, then keep the +** database in a separate file. +** +** If the file being opened is not an appended database, then this shim is +** a pass-through into the default underlying VFS. +**/ +SQLITE_EXTENSION_INIT1 +#include +#include +/* The append mark at the end of the database is: +** +** Start-Of-SQLite3-NNNNNNNN +** 123456789 123456789 12345 +** +** The NNNNNNNN represents a 64-bit big-endian unsigned integer which is +** the offset to page 1. +*/ +#define APND_MARK_PREFIX "Start-Of-SQLite3-" +#define APND_MARK_PREFIX_SZ 17 +#define APND_MARK_SIZE 25 + +/* +** Maximum size of the combined prefix + database + append-mark. This +** must be less than 0x40000000 to avoid locking issues on Windows. +*/ +#define APND_MAX_SIZE (65536*15259) + +/* +** Forward declaration of objects used by this utility +*/ +typedef struct sqlite3_vfs ApndVfs; +typedef struct ApndFile ApndFile; + +/* Access to a lower-level VFS that (might) implement dynamic loading, +** access to randomness, etc. +*/ +#define ORIGVFS(p) ((sqlite3_vfs*)((p)->pAppData)) +#define ORIGFILE(p) ((sqlite3_file*)(((ApndFile*)(p))+1)) + +/* An open file */ +struct ApndFile { + sqlite3_file base; /* IO methods */ + sqlite3_int64 iPgOne; /* File offset to page 1 */ + sqlite3_int64 iMark; /* Start of the append-mark */ +}; + +/* +** Methods for ApndFile +*/ +static int apndClose(sqlite3_file*); +static int apndRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); +static int apndWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst); +static int apndTruncate(sqlite3_file*, sqlite3_int64 size); +static int apndSync(sqlite3_file*, int flags); +static int apndFileSize(sqlite3_file*, sqlite3_int64 *pSize); +static int apndLock(sqlite3_file*, int); +static int apndUnlock(sqlite3_file*, int); +static int apndCheckReservedLock(sqlite3_file*, int *pResOut); +static int apndFileControl(sqlite3_file*, int op, void *pArg); +static int apndSectorSize(sqlite3_file*); +static int apndDeviceCharacteristics(sqlite3_file*); +static int apndShmMap(sqlite3_file*, int iPg, int pgsz, int, void volatile**); +static int apndShmLock(sqlite3_file*, int offset, int n, int flags); +static void apndShmBarrier(sqlite3_file*); +static int apndShmUnmap(sqlite3_file*, int deleteFlag); +static int apndFetch(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp); +static int apndUnfetch(sqlite3_file*, sqlite3_int64 iOfst, void *p); + +/* +** Methods for ApndVfs +*/ +static int apndOpen(sqlite3_vfs*, const char *, sqlite3_file*, int , int *); +static int apndDelete(sqlite3_vfs*, const char *zName, int syncDir); +static int apndAccess(sqlite3_vfs*, const char *zName, int flags, int *); +static int apndFullPathname(sqlite3_vfs*, const char *zName, int, char *zOut); +static void *apndDlOpen(sqlite3_vfs*, const char *zFilename); +static void apndDlError(sqlite3_vfs*, int nByte, char *zErrMsg); +static void (*apndDlSym(sqlite3_vfs *pVfs, void *p, const char*zSym))(void); +static void apndDlClose(sqlite3_vfs*, void*); +static int apndRandomness(sqlite3_vfs*, int nByte, char *zOut); +static int apndSleep(sqlite3_vfs*, int microseconds); +static int apndCurrentTime(sqlite3_vfs*, double*); +static int apndGetLastError(sqlite3_vfs*, int, char *); +static int apndCurrentTimeInt64(sqlite3_vfs*, sqlite3_int64*); +static int apndSetSystemCall(sqlite3_vfs*, const char*,sqlite3_syscall_ptr); +static sqlite3_syscall_ptr apndGetSystemCall(sqlite3_vfs*, const char *z); +static const char *apndNextSystemCall(sqlite3_vfs*, const char *zName); + +static sqlite3_vfs apnd_vfs = { + 3, /* iVersion (set when registered) */ + 0, /* szOsFile (set when registered) */ + 1024, /* mxPathname */ + 0, /* pNext */ + "apndvfs", /* zName */ + 0, /* pAppData (set when registered) */ + apndOpen, /* xOpen */ + apndDelete, /* xDelete */ + apndAccess, /* xAccess */ + apndFullPathname, /* xFullPathname */ + apndDlOpen, /* xDlOpen */ + apndDlError, /* xDlError */ + apndDlSym, /* xDlSym */ + apndDlClose, /* xDlClose */ + apndRandomness, /* xRandomness */ + apndSleep, /* xSleep */ + apndCurrentTime, /* xCurrentTime */ + apndGetLastError, /* xGetLastError */ + apndCurrentTimeInt64, /* xCurrentTimeInt64 */ + apndSetSystemCall, /* xSetSystemCall */ + apndGetSystemCall, /* xGetSystemCall */ + apndNextSystemCall /* xNextSystemCall */ +}; + +static const sqlite3_io_methods apnd_io_methods = { + 3, /* iVersion */ + apndClose, /* xClose */ + apndRead, /* xRead */ + apndWrite, /* xWrite */ + apndTruncate, /* xTruncate */ + apndSync, /* xSync */ + apndFileSize, /* xFileSize */ + apndLock, /* xLock */ + apndUnlock, /* xUnlock */ + apndCheckReservedLock, /* xCheckReservedLock */ + apndFileControl, /* xFileControl */ + apndSectorSize, /* xSectorSize */ + apndDeviceCharacteristics, /* xDeviceCharacteristics */ + apndShmMap, /* xShmMap */ + apndShmLock, /* xShmLock */ + apndShmBarrier, /* xShmBarrier */ + apndShmUnmap, /* xShmUnmap */ + apndFetch, /* xFetch */ + apndUnfetch /* xUnfetch */ +}; + + + +/* +** Close an apnd-file. +*/ +static int apndClose(sqlite3_file *pFile){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xClose(pFile); +} + +/* +** Read data from an apnd-file. +*/ +static int apndRead( + sqlite3_file *pFile, + void *zBuf, + int iAmt, + sqlite_int64 iOfst +){ + ApndFile *p = (ApndFile *)pFile; + pFile = ORIGFILE(pFile); + return pFile->pMethods->xRead(pFile, zBuf, iAmt, iOfst+p->iPgOne); +} + +/* +** Add the append-mark onto the end of the file. +*/ +static int apndWriteMark(ApndFile *p, sqlite3_file *pFile){ + int i; + unsigned char a[APND_MARK_SIZE]; + memcpy(a, APND_MARK_PREFIX, APND_MARK_PREFIX_SZ); + for(i=0; i<8; i++){ + a[APND_MARK_PREFIX_SZ+i] = (p->iPgOne >> (56 - i*8)) & 0xff; + } + return pFile->pMethods->xWrite(pFile, a, APND_MARK_SIZE, p->iMark); +} + +/* +** Write data to an apnd-file. +*/ +static int apndWrite( + sqlite3_file *pFile, + const void *zBuf, + int iAmt, + sqlite_int64 iOfst +){ + int rc; + ApndFile *p = (ApndFile *)pFile; + pFile = ORIGFILE(pFile); + if( iOfst+iAmt>=APND_MAX_SIZE ) return SQLITE_FULL; + rc = pFile->pMethods->xWrite(pFile, zBuf, iAmt, iOfst+p->iPgOne); + if( rc==SQLITE_OK && iOfst + iAmt + p->iPgOne > p->iMark ){ + sqlite3_int64 sz = 0; + rc = pFile->pMethods->xFileSize(pFile, &sz); + if( rc==SQLITE_OK ){ + p->iMark = sz - APND_MARK_SIZE; + if( iOfst + iAmt + p->iPgOne > p->iMark ){ + p->iMark = p->iPgOne + iOfst + iAmt; + rc = apndWriteMark(p, pFile); + } + } + } + return rc; +} + +/* +** Truncate an apnd-file. +*/ +static int apndTruncate(sqlite3_file *pFile, sqlite_int64 size){ + int rc; + ApndFile *p = (ApndFile *)pFile; + pFile = ORIGFILE(pFile); + rc = pFile->pMethods->xTruncate(pFile, size+p->iPgOne+APND_MARK_SIZE); + if( rc==SQLITE_OK ){ + p->iMark = p->iPgOne+size; + rc = apndWriteMark(p, pFile); + } + return rc; +} + +/* +** Sync an apnd-file. +*/ +static int apndSync(sqlite3_file *pFile, int flags){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xSync(pFile, flags); +} + +/* +** Return the current file-size of an apnd-file. +*/ +static int apndFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){ + ApndFile *p = (ApndFile *)pFile; + int rc; + pFile = ORIGFILE(p); + rc = pFile->pMethods->xFileSize(pFile, pSize); + if( rc==SQLITE_OK && p->iPgOne ){ + *pSize -= p->iPgOne + APND_MARK_SIZE; + } + return rc; +} + +/* +** Lock an apnd-file. +*/ +static int apndLock(sqlite3_file *pFile, int eLock){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xLock(pFile, eLock); +} + +/* +** Unlock an apnd-file. +*/ +static int apndUnlock(sqlite3_file *pFile, int eLock){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xUnlock(pFile, eLock); +} + +/* +** Check if another file-handle holds a RESERVED lock on an apnd-file. +*/ +static int apndCheckReservedLock(sqlite3_file *pFile, int *pResOut){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xCheckReservedLock(pFile, pResOut); +} + +/* +** File control method. For custom operations on an apnd-file. +*/ +static int apndFileControl(sqlite3_file *pFile, int op, void *pArg){ + ApndFile *p = (ApndFile *)pFile; + int rc; + pFile = ORIGFILE(pFile); + rc = pFile->pMethods->xFileControl(pFile, op, pArg); + if( rc==SQLITE_OK && op==SQLITE_FCNTL_VFSNAME ){ + *(char**)pArg = sqlite3_mprintf("apnd(%lld)/%z", p->iPgOne, *(char**)pArg); + } + return rc; +} + +/* +** Return the sector-size in bytes for an apnd-file. +*/ +static int apndSectorSize(sqlite3_file *pFile){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xSectorSize(pFile); +} + +/* +** Return the device characteristic flags supported by an apnd-file. +*/ +static int apndDeviceCharacteristics(sqlite3_file *pFile){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xDeviceCharacteristics(pFile); +} + +/* Create a shared memory file mapping */ +static int apndShmMap( + sqlite3_file *pFile, + int iPg, + int pgsz, + int bExtend, + void volatile **pp +){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xShmMap(pFile,iPg,pgsz,bExtend,pp); +} + +/* Perform locking on a shared-memory segment */ +static int apndShmLock(sqlite3_file *pFile, int offset, int n, int flags){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xShmLock(pFile,offset,n,flags); +} + +/* Memory barrier operation on shared memory */ +static void apndShmBarrier(sqlite3_file *pFile){ + pFile = ORIGFILE(pFile); + pFile->pMethods->xShmBarrier(pFile); +} + +/* Unmap a shared memory segment */ +static int apndShmUnmap(sqlite3_file *pFile, int deleteFlag){ + pFile = ORIGFILE(pFile); + return pFile->pMethods->xShmUnmap(pFile,deleteFlag); +} + +/* Fetch a page of a memory-mapped file */ +static int apndFetch( + sqlite3_file *pFile, + sqlite3_int64 iOfst, + int iAmt, + void **pp +){ + ApndFile *p = (ApndFile *)pFile; + pFile = ORIGFILE(pFile); + return pFile->pMethods->xFetch(pFile, iOfst+p->iPgOne, iAmt, pp); +} + +/* Release a memory-mapped page */ +static int apndUnfetch(sqlite3_file *pFile, sqlite3_int64 iOfst, void *pPage){ + ApndFile *p = (ApndFile *)pFile; + pFile = ORIGFILE(pFile); + return pFile->pMethods->xUnfetch(pFile, iOfst+p->iPgOne, pPage); +} + +/* +** Check to see if the file is an ordinary SQLite database file. +*/ +static int apndIsOrdinaryDatabaseFile(sqlite3_int64 sz, sqlite3_file *pFile){ + int rc; + char zHdr[16]; + static const char aSqliteHdr[] = "SQLite format 3"; + if( sz<512 ) return 0; + rc = pFile->pMethods->xRead(pFile, zHdr, sizeof(zHdr), 0); + if( rc ) return 0; + return memcmp(zHdr, aSqliteHdr, sizeof(zHdr))==0; +} + +/* +** Try to read the append-mark off the end of a file. Return the +** start of the appended database if the append-mark is present. If +** there is no append-mark, return -1; +*/ +static sqlite3_int64 apndReadMark(sqlite3_int64 sz, sqlite3_file *pFile){ + int rc, i; + sqlite3_int64 iMark; + unsigned char a[APND_MARK_SIZE]; + + if( sz<=APND_MARK_SIZE ) return -1; + rc = pFile->pMethods->xRead(pFile, a, APND_MARK_SIZE, sz-APND_MARK_SIZE); + if( rc ) return -1; + if( memcmp(a, APND_MARK_PREFIX, APND_MARK_PREFIX_SZ)!=0 ) return -1; + iMark = ((sqlite3_int64)(a[APND_MARK_PREFIX_SZ]&0x7f))<<56; + for(i=1; i<8; i++){ + iMark += (sqlite3_int64)a[APND_MARK_PREFIX_SZ+i]<<(56-8*i); + } + return iMark; +} + +/* +** Open an apnd file handle. +*/ +static int apndOpen( + sqlite3_vfs *pVfs, + const char *zName, + sqlite3_file *pFile, + int flags, + int *pOutFlags +){ + ApndFile *p; + sqlite3_file *pSubFile; + sqlite3_vfs *pSubVfs; + int rc; + sqlite3_int64 sz; + pSubVfs = ORIGVFS(pVfs); + if( (flags & SQLITE_OPEN_MAIN_DB)==0 ){ + return pSubVfs->xOpen(pSubVfs, zName, pFile, flags, pOutFlags); + } + p = (ApndFile*)pFile; + memset(p, 0, sizeof(*p)); + pSubFile = ORIGFILE(pFile); + p->base.pMethods = &apnd_io_methods; + rc = pSubVfs->xOpen(pSubVfs, zName, pSubFile, flags, pOutFlags); + if( rc ) goto apnd_open_done; + rc = pSubFile->pMethods->xFileSize(pSubFile, &sz); + if( rc ){ + pSubFile->pMethods->xClose(pSubFile); + goto apnd_open_done; + } + if( apndIsOrdinaryDatabaseFile(sz, pSubFile) ){ + memmove(pFile, pSubFile, pSubVfs->szOsFile); + return SQLITE_OK; + } + p->iMark = 0; + p->iPgOne = apndReadMark(sz, pFile); + if( p->iPgOne>0 ){ + return SQLITE_OK; + } + if( (flags & SQLITE_OPEN_CREATE)==0 ){ + pSubFile->pMethods->xClose(pSubFile); + rc = SQLITE_CANTOPEN; + } + p->iPgOne = (sz+0xfff) & ~(sqlite3_int64)0xfff; +apnd_open_done: + if( rc ) pFile->pMethods = 0; + return rc; +} + +/* +** All other VFS methods are pass-thrus. +*/ +static int apndDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){ + return ORIGVFS(pVfs)->xDelete(ORIGVFS(pVfs), zPath, dirSync); +} +static int apndAccess( + sqlite3_vfs *pVfs, + const char *zPath, + int flags, + int *pResOut +){ + return ORIGVFS(pVfs)->xAccess(ORIGVFS(pVfs), zPath, flags, pResOut); +} +static int apndFullPathname( + sqlite3_vfs *pVfs, + const char *zPath, + int nOut, + char *zOut +){ + return ORIGVFS(pVfs)->xFullPathname(ORIGVFS(pVfs),zPath,nOut,zOut); +} +static void *apndDlOpen(sqlite3_vfs *pVfs, const char *zPath){ + return ORIGVFS(pVfs)->xDlOpen(ORIGVFS(pVfs), zPath); +} +static void apndDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){ + ORIGVFS(pVfs)->xDlError(ORIGVFS(pVfs), nByte, zErrMsg); +} +static void (*apndDlSym(sqlite3_vfs *pVfs, void *p, const char *zSym))(void){ + return ORIGVFS(pVfs)->xDlSym(ORIGVFS(pVfs), p, zSym); +} +static void apndDlClose(sqlite3_vfs *pVfs, void *pHandle){ + ORIGVFS(pVfs)->xDlClose(ORIGVFS(pVfs), pHandle); +} +static int apndRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){ + return ORIGVFS(pVfs)->xRandomness(ORIGVFS(pVfs), nByte, zBufOut); +} +static int apndSleep(sqlite3_vfs *pVfs, int nMicro){ + return ORIGVFS(pVfs)->xSleep(ORIGVFS(pVfs), nMicro); +} +static int apndCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){ + return ORIGVFS(pVfs)->xCurrentTime(ORIGVFS(pVfs), pTimeOut); +} +static int apndGetLastError(sqlite3_vfs *pVfs, int a, char *b){ + return ORIGVFS(pVfs)->xGetLastError(ORIGVFS(pVfs), a, b); +} +static int apndCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *p){ + return ORIGVFS(pVfs)->xCurrentTimeInt64(ORIGVFS(pVfs), p); +} +static int apndSetSystemCall( + sqlite3_vfs *pVfs, + const char *zName, + sqlite3_syscall_ptr pCall +){ + return ORIGVFS(pVfs)->xSetSystemCall(ORIGVFS(pVfs),zName,pCall); +} +static sqlite3_syscall_ptr apndGetSystemCall( + sqlite3_vfs *pVfs, + const char *zName +){ + return ORIGVFS(pVfs)->xGetSystemCall(ORIGVFS(pVfs),zName); +} +static const char *apndNextSystemCall(sqlite3_vfs *pVfs, const char *zName){ + return ORIGVFS(pVfs)->xNextSystemCall(ORIGVFS(pVfs), zName); +} + + +#ifdef _WIN32 + +#endif +/* +** This routine is called when the extension is loaded. +** Register the new VFS. +*/ +int sqlite3_appendvfs_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + int rc = SQLITE_OK; + sqlite3_vfs *pOrig; + SQLITE_EXTENSION_INIT2(pApi); + (void)pzErrMsg; + (void)db; + pOrig = sqlite3_vfs_find(0); + apnd_vfs.iVersion = pOrig->iVersion; + apnd_vfs.pAppData = pOrig; + apnd_vfs.szOsFile = pOrig->szOsFile + sizeof(ApndFile); + rc = sqlite3_vfs_register(&apnd_vfs, 0); +#ifdef APPENDVFS_TEST + if( rc==SQLITE_OK ){ + rc = sqlite3_auto_extension((void(*)(void))apndvfsRegister); + } +#endif + if( rc==SQLITE_OK ) rc = SQLITE_OK_LOAD_PERMANENTLY; + return rc; +} + +/************************* End ../ext/misc/appendvfs.c ********************/ +#ifdef SQLITE_HAVE_ZLIB +/************************* Begin ../ext/misc/zipfile.c ******************/ +/* +** 2017-12-26 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file implements a virtual table for reading and writing ZIP archive +** files. +** +** Usage example: +** +** SELECT name, sz, datetime(mtime,'unixepoch') FROM zipfile($filename); +** +** Current limitations: +** +** * No support for encryption +** * No support for ZIP archives spanning multiple files +** * No support for zip64 extensions +** * Only the "inflate/deflate" (zlib) compression method is supported +*/ +SQLITE_EXTENSION_INIT1 +#include +#include +#include + +#include + +#ifndef SQLITE_OMIT_VIRTUALTABLE + +#ifndef SQLITE_AMALGAMATION + +/* typedef sqlite3_int64 i64; */ +/* typedef unsigned char u8; */ +typedef unsigned short u16; +typedef unsigned long u32; +#define MIN(a,b) ((a)<(b) ? (a) : (b)) + +#if defined(SQLITE_COVERAGE_TEST) || defined(SQLITE_MUTATION_TEST) +# define ALWAYS(X) (1) +# define NEVER(X) (0) +#elif !defined(NDEBUG) +# define ALWAYS(X) ((X)?1:(assert(0),0)) +# define NEVER(X) ((X)?(assert(0),1):0) +#else +# define ALWAYS(X) (X) +# define NEVER(X) (X) +#endif + +#endif /* SQLITE_AMALGAMATION */ + +/* +** Definitions for mode bitmasks S_IFDIR, S_IFREG and S_IFLNK. +** +** In some ways it would be better to obtain these values from system +** header files. But, the dependency is undesirable and (a) these +** have been stable for decades, (b) the values are part of POSIX and +** are also made explicit in [man stat], and (c) are part of the +** file format for zip archives. +*/ +#ifndef S_IFDIR +# define S_IFDIR 0040000 +#endif +#ifndef S_IFREG +# define S_IFREG 0100000 +#endif +#ifndef S_IFLNK +# define S_IFLNK 0120000 +#endif + +static const char ZIPFILE_SCHEMA[] = + "CREATE TABLE y(" + "name PRIMARY KEY," /* 0: Name of file in zip archive */ + "mode," /* 1: POSIX mode for file */ + "mtime," /* 2: Last modification time (secs since 1970)*/ + "sz," /* 3: Size of object */ + "rawdata," /* 4: Raw data */ + "data," /* 5: Uncompressed data */ + "method," /* 6: Compression method (integer) */ + "z HIDDEN" /* 7: Name of zip file */ + ") WITHOUT ROWID;"; + +#define ZIPFILE_F_COLUMN_IDX 7 /* Index of column "file" in the above */ +#define ZIPFILE_BUFFER_SIZE (64*1024) + + +/* +** Magic numbers used to read and write zip files. +** +** ZIPFILE_NEWENTRY_MADEBY: +** Use this value for the "version-made-by" field in new zip file +** entries. The upper byte indicates "unix", and the lower byte +** indicates that the zip file matches pkzip specification 3.0. +** This is what info-zip seems to do. +** +** ZIPFILE_NEWENTRY_REQUIRED: +** Value for "version-required-to-extract" field of new entries. +** Version 2.0 is required to support folders and deflate compression. +** +** ZIPFILE_NEWENTRY_FLAGS: +** Value for "general-purpose-bit-flags" field of new entries. Bit +** 11 means "utf-8 filename and comment". +** +** ZIPFILE_SIGNATURE_CDS: +** First 4 bytes of a valid CDS record. +** +** ZIPFILE_SIGNATURE_LFH: +** First 4 bytes of a valid LFH record. +** +** ZIPFILE_SIGNATURE_EOCD +** First 4 bytes of a valid EOCD record. +*/ +#define ZIPFILE_EXTRA_TIMESTAMP 0x5455 +#define ZIPFILE_NEWENTRY_MADEBY ((3<<8) + 30) +#define ZIPFILE_NEWENTRY_REQUIRED 20 +#define ZIPFILE_NEWENTRY_FLAGS 0x800 +#define ZIPFILE_SIGNATURE_CDS 0x02014b50 +#define ZIPFILE_SIGNATURE_LFH 0x04034b50 +#define ZIPFILE_SIGNATURE_EOCD 0x06054b50 + +/* +** The sizes of the fixed-size part of each of the three main data +** structures in a zip archive. +*/ +#define ZIPFILE_LFH_FIXED_SZ 30 +#define ZIPFILE_EOCD_FIXED_SZ 22 +#define ZIPFILE_CDS_FIXED_SZ 46 + +/* +*** 4.3.16 End of central directory record: +*** +*** end of central dir signature 4 bytes (0x06054b50) +*** number of this disk 2 bytes +*** number of the disk with the +*** start of the central directory 2 bytes +*** total number of entries in the +*** central directory on this disk 2 bytes +*** total number of entries in +*** the central directory 2 bytes +*** size of the central directory 4 bytes +*** offset of start of central +*** directory with respect to +*** the starting disk number 4 bytes +*** .ZIP file comment length 2 bytes +*** .ZIP file comment (variable size) +*/ +typedef struct ZipfileEOCD ZipfileEOCD; +struct ZipfileEOCD { + u16 iDisk; + u16 iFirstDisk; + u16 nEntry; + u16 nEntryTotal; + u32 nSize; + u32 iOffset; +}; + +/* +*** 4.3.12 Central directory structure: +*** +*** ... +*** +*** central file header signature 4 bytes (0x02014b50) +*** version made by 2 bytes +*** version needed to extract 2 bytes +*** general purpose bit flag 2 bytes +*** compression method 2 bytes +*** last mod file time 2 bytes +*** last mod file date 2 bytes +*** crc-32 4 bytes +*** compressed size 4 bytes +*** uncompressed size 4 bytes +*** file name length 2 bytes +*** extra field length 2 bytes +*** file comment length 2 bytes +*** disk number start 2 bytes +*** internal file attributes 2 bytes +*** external file attributes 4 bytes +*** relative offset of local header 4 bytes +*/ +typedef struct ZipfileCDS ZipfileCDS; +struct ZipfileCDS { + u16 iVersionMadeBy; + u16 iVersionExtract; + u16 flags; + u16 iCompression; + u16 mTime; + u16 mDate; + u32 crc32; + u32 szCompressed; + u32 szUncompressed; + u16 nFile; + u16 nExtra; + u16 nComment; + u16 iDiskStart; + u16 iInternalAttr; + u32 iExternalAttr; + u32 iOffset; + char *zFile; /* Filename (sqlite3_malloc()) */ +}; + +/* +*** 4.3.7 Local file header: +*** +*** local file header signature 4 bytes (0x04034b50) +*** version needed to extract 2 bytes +*** general purpose bit flag 2 bytes +*** compression method 2 bytes +*** last mod file time 2 bytes +*** last mod file date 2 bytes +*** crc-32 4 bytes +*** compressed size 4 bytes +*** uncompressed size 4 bytes +*** file name length 2 bytes +*** extra field length 2 bytes +*** +*/ +typedef struct ZipfileLFH ZipfileLFH; +struct ZipfileLFH { + u16 iVersionExtract; + u16 flags; + u16 iCompression; + u16 mTime; + u16 mDate; + u32 crc32; + u32 szCompressed; + u32 szUncompressed; + u16 nFile; + u16 nExtra; +}; + +typedef struct ZipfileEntry ZipfileEntry; +struct ZipfileEntry { + ZipfileCDS cds; /* Parsed CDS record */ + u32 mUnixTime; /* Modification time, in UNIX format */ + u8 *aExtra; /* cds.nExtra+cds.nComment bytes of extra data */ + i64 iDataOff; /* Offset to data in file (if aData==0) */ + u8 *aData; /* cds.szCompressed bytes of compressed data */ + ZipfileEntry *pNext; /* Next element in in-memory CDS */ +}; + +/* +** Cursor type for zipfile tables. +*/ +typedef struct ZipfileCsr ZipfileCsr; +struct ZipfileCsr { + sqlite3_vtab_cursor base; /* Base class - must be first */ + i64 iId; /* Cursor ID */ + u8 bEof; /* True when at EOF */ + u8 bNoop; /* If next xNext() call is no-op */ + + /* Used outside of write transactions */ + FILE *pFile; /* Zip file */ + i64 iNextOff; /* Offset of next record in central directory */ + ZipfileEOCD eocd; /* Parse of central directory record */ + + ZipfileEntry *pFreeEntry; /* Free this list when cursor is closed or reset */ + ZipfileEntry *pCurrent; /* Current entry */ + ZipfileCsr *pCsrNext; /* Next cursor on same virtual table */ +}; + +typedef struct ZipfileTab ZipfileTab; +struct ZipfileTab { + sqlite3_vtab base; /* Base class - must be first */ + char *zFile; /* Zip file this table accesses (may be NULL) */ + sqlite3 *db; /* Host database connection */ + u8 *aBuffer; /* Temporary buffer used for various tasks */ + + ZipfileCsr *pCsrList; /* List of cursors */ + i64 iNextCsrid; + + /* The following are used by write transactions only */ + ZipfileEntry *pFirstEntry; /* Linked list of all files (if pWriteFd!=0) */ + ZipfileEntry *pLastEntry; /* Last element in pFirstEntry list */ + FILE *pWriteFd; /* File handle open on zip archive */ + i64 szCurrent; /* Current size of zip archive */ + i64 szOrig; /* Size of archive at start of transaction */ +}; + +/* +** Set the error message contained in context ctx to the results of +** vprintf(zFmt, ...). +*/ +static void zipfileCtxErrorMsg(sqlite3_context *ctx, const char *zFmt, ...){ + char *zMsg = 0; + va_list ap; + va_start(ap, zFmt); + zMsg = sqlite3_vmprintf(zFmt, ap); + sqlite3_result_error(ctx, zMsg, -1); + sqlite3_free(zMsg); + va_end(ap); +} + +/* +** If string zIn is quoted, dequote it in place. Otherwise, if the string +** is not quoted, do nothing. +*/ +static void zipfileDequote(char *zIn){ + char q = zIn[0]; + if( q=='"' || q=='\'' || q=='`' || q=='[' ){ + int iIn = 1; + int iOut = 0; + if( q=='[' ) q = ']'; + while( ALWAYS(zIn[iIn]) ){ + char c = zIn[iIn++]; + if( c==q && zIn[iIn++]!=q ) break; + zIn[iOut++] = c; + } + zIn[iOut] = '\0'; + } +} + +/* +** Construct a new ZipfileTab virtual table object. +** +** argv[0] -> module name ("zipfile") +** argv[1] -> database name +** argv[2] -> table name +** argv[...] -> "column name" and other module argument fields. +*/ +static int zipfileConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + int nByte = sizeof(ZipfileTab) + ZIPFILE_BUFFER_SIZE; + int nFile = 0; + const char *zFile = 0; + ZipfileTab *pNew = 0; + int rc; + + /* If the table name is not "zipfile", require that the argument be + ** specified. This stops zipfile tables from being created as: + ** + ** CREATE VIRTUAL TABLE zzz USING zipfile(); + ** + ** It does not prevent: + ** + ** CREATE VIRTUAL TABLE zipfile USING zipfile(); + */ + assert( 0==sqlite3_stricmp(argv[0], "zipfile") ); + if( (0!=sqlite3_stricmp(argv[2], "zipfile") && argc<4) || argc>4 ){ + *pzErr = sqlite3_mprintf("zipfile constructor requires one argument"); + return SQLITE_ERROR; + } + + if( argc>3 ){ + zFile = argv[3]; + nFile = (int)strlen(zFile)+1; + } + + rc = sqlite3_declare_vtab(db, ZIPFILE_SCHEMA); + if( rc==SQLITE_OK ){ + pNew = (ZipfileTab*)sqlite3_malloc(nByte+nFile); + if( pNew==0 ) return SQLITE_NOMEM; + memset(pNew, 0, nByte+nFile); + pNew->db = db; + pNew->aBuffer = (u8*)&pNew[1]; + if( zFile ){ + pNew->zFile = (char*)&pNew->aBuffer[ZIPFILE_BUFFER_SIZE]; + memcpy(pNew->zFile, zFile, nFile); + zipfileDequote(pNew->zFile); + } + } + *ppVtab = (sqlite3_vtab*)pNew; + return rc; +} + +/* +** Free the ZipfileEntry structure indicated by the only argument. +*/ +static void zipfileEntryFree(ZipfileEntry *p){ + if( p ){ + sqlite3_free(p->cds.zFile); + sqlite3_free(p); + } +} + +/* +** Release resources that should be freed at the end of a write +** transaction. +*/ +static void zipfileCleanupTransaction(ZipfileTab *pTab){ + ZipfileEntry *pEntry; + ZipfileEntry *pNext; + + if( pTab->pWriteFd ){ + fclose(pTab->pWriteFd); + pTab->pWriteFd = 0; + } + for(pEntry=pTab->pFirstEntry; pEntry; pEntry=pNext){ + pNext = pEntry->pNext; + zipfileEntryFree(pEntry); + } + pTab->pFirstEntry = 0; + pTab->pLastEntry = 0; + pTab->szCurrent = 0; + pTab->szOrig = 0; +} + +/* +** This method is the destructor for zipfile vtab objects. +*/ +static int zipfileDisconnect(sqlite3_vtab *pVtab){ + zipfileCleanupTransaction((ZipfileTab*)pVtab); + sqlite3_free(pVtab); + return SQLITE_OK; +} + +/* +** Constructor for a new ZipfileCsr object. +*/ +static int zipfileOpen(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCsr){ + ZipfileTab *pTab = (ZipfileTab*)p; + ZipfileCsr *pCsr; + pCsr = sqlite3_malloc(sizeof(*pCsr)); + *ppCsr = (sqlite3_vtab_cursor*)pCsr; + if( pCsr==0 ){ + return SQLITE_NOMEM; + } + memset(pCsr, 0, sizeof(*pCsr)); + pCsr->iId = ++pTab->iNextCsrid; + pCsr->pCsrNext = pTab->pCsrList; + pTab->pCsrList = pCsr; + return SQLITE_OK; +} + +/* +** Reset a cursor back to the state it was in when first returned +** by zipfileOpen(). +*/ +static void zipfileResetCursor(ZipfileCsr *pCsr){ + ZipfileEntry *p; + ZipfileEntry *pNext; + + pCsr->bEof = 0; + if( pCsr->pFile ){ + fclose(pCsr->pFile); + pCsr->pFile = 0; + zipfileEntryFree(pCsr->pCurrent); + pCsr->pCurrent = 0; + } + + for(p=pCsr->pFreeEntry; p; p=pNext){ + pNext = p->pNext; + zipfileEntryFree(p); + } +} + +/* +** Destructor for an ZipfileCsr. +*/ +static int zipfileClose(sqlite3_vtab_cursor *cur){ + ZipfileCsr *pCsr = (ZipfileCsr*)cur; + ZipfileTab *pTab = (ZipfileTab*)(pCsr->base.pVtab); + ZipfileCsr **pp; + zipfileResetCursor(pCsr); + + /* Remove this cursor from the ZipfileTab.pCsrList list. */ + for(pp=&pTab->pCsrList; *pp!=pCsr; pp=&((*pp)->pCsrNext)); + *pp = pCsr->pCsrNext; + + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** Set the error message for the virtual table associated with cursor +** pCsr to the results of vprintf(zFmt, ...). +*/ +static void zipfileTableErr(ZipfileTab *pTab, const char *zFmt, ...){ + va_list ap; + va_start(ap, zFmt); + sqlite3_free(pTab->base.zErrMsg); + pTab->base.zErrMsg = sqlite3_vmprintf(zFmt, ap); + va_end(ap); +} +static void zipfileCursorErr(ZipfileCsr *pCsr, const char *zFmt, ...){ + va_list ap; + va_start(ap, zFmt); + sqlite3_free(pCsr->base.pVtab->zErrMsg); + pCsr->base.pVtab->zErrMsg = sqlite3_vmprintf(zFmt, ap); + va_end(ap); +} + +/* +** Read nRead bytes of data from offset iOff of file pFile into buffer +** aRead[]. Return SQLITE_OK if successful, or an SQLite error code +** otherwise. +** +** If an error does occur, output variable (*pzErrmsg) may be set to point +** to an English language error message. It is the responsibility of the +** caller to eventually free this buffer using +** sqlite3_free(). +*/ +static int zipfileReadData( + FILE *pFile, /* Read from this file */ + u8 *aRead, /* Read into this buffer */ + int nRead, /* Number of bytes to read */ + i64 iOff, /* Offset to read from */ + char **pzErrmsg /* OUT: Error message (from sqlite3_malloc) */ +){ + size_t n; + fseek(pFile, (long)iOff, SEEK_SET); + n = fread(aRead, 1, nRead, pFile); + if( (int)n!=nRead ){ + *pzErrmsg = sqlite3_mprintf("error in fread()"); + return SQLITE_ERROR; + } + return SQLITE_OK; +} + +static int zipfileAppendData( + ZipfileTab *pTab, + const u8 *aWrite, + int nWrite +){ + size_t n; + fseek(pTab->pWriteFd, (long)pTab->szCurrent, SEEK_SET); + n = fwrite(aWrite, 1, nWrite, pTab->pWriteFd); + if( (int)n!=nWrite ){ + pTab->base.zErrMsg = sqlite3_mprintf("error in fwrite()"); + return SQLITE_ERROR; + } + pTab->szCurrent += nWrite; + return SQLITE_OK; +} + +/* +** Read and return a 16-bit little-endian unsigned integer from buffer aBuf. +*/ +static u16 zipfileGetU16(const u8 *aBuf){ + return (aBuf[1] << 8) + aBuf[0]; +} + +/* +** Read and return a 32-bit little-endian unsigned integer from buffer aBuf. +*/ +static u32 zipfileGetU32(const u8 *aBuf){ + return ((u32)(aBuf[3]) << 24) + + ((u32)(aBuf[2]) << 16) + + ((u32)(aBuf[1]) << 8) + + ((u32)(aBuf[0]) << 0); +} + +/* +** Write a 16-bit little endiate integer into buffer aBuf. +*/ +static void zipfilePutU16(u8 *aBuf, u16 val){ + aBuf[0] = val & 0xFF; + aBuf[1] = (val>>8) & 0xFF; +} + +/* +** Write a 32-bit little endiate integer into buffer aBuf. +*/ +static void zipfilePutU32(u8 *aBuf, u32 val){ + aBuf[0] = val & 0xFF; + aBuf[1] = (val>>8) & 0xFF; + aBuf[2] = (val>>16) & 0xFF; + aBuf[3] = (val>>24) & 0xFF; +} + +#define zipfileRead32(aBuf) ( aBuf+=4, zipfileGetU32(aBuf-4) ) +#define zipfileRead16(aBuf) ( aBuf+=2, zipfileGetU16(aBuf-2) ) + +#define zipfileWrite32(aBuf,val) { zipfilePutU32(aBuf,val); aBuf+=4; } +#define zipfileWrite16(aBuf,val) { zipfilePutU16(aBuf,val); aBuf+=2; } + +/* +** Magic numbers used to read CDS records. +*/ +#define ZIPFILE_CDS_NFILE_OFF 28 +#define ZIPFILE_CDS_SZCOMPRESSED_OFF 20 + +/* +** Decode the CDS record in buffer aBuf into (*pCDS). Return SQLITE_ERROR +** if the record is not well-formed, or SQLITE_OK otherwise. +*/ +static int zipfileReadCDS(u8 *aBuf, ZipfileCDS *pCDS){ + u8 *aRead = aBuf; + u32 sig = zipfileRead32(aRead); + int rc = SQLITE_OK; + if( sig!=ZIPFILE_SIGNATURE_CDS ){ + rc = SQLITE_ERROR; + }else{ + pCDS->iVersionMadeBy = zipfileRead16(aRead); + pCDS->iVersionExtract = zipfileRead16(aRead); + pCDS->flags = zipfileRead16(aRead); + pCDS->iCompression = zipfileRead16(aRead); + pCDS->mTime = zipfileRead16(aRead); + pCDS->mDate = zipfileRead16(aRead); + pCDS->crc32 = zipfileRead32(aRead); + pCDS->szCompressed = zipfileRead32(aRead); + pCDS->szUncompressed = zipfileRead32(aRead); + assert( aRead==&aBuf[ZIPFILE_CDS_NFILE_OFF] ); + pCDS->nFile = zipfileRead16(aRead); + pCDS->nExtra = zipfileRead16(aRead); + pCDS->nComment = zipfileRead16(aRead); + pCDS->iDiskStart = zipfileRead16(aRead); + pCDS->iInternalAttr = zipfileRead16(aRead); + pCDS->iExternalAttr = zipfileRead32(aRead); + pCDS->iOffset = zipfileRead32(aRead); + assert( aRead==&aBuf[ZIPFILE_CDS_FIXED_SZ] ); + } + + return rc; +} + +/* +** Decode the LFH record in buffer aBuf into (*pLFH). Return SQLITE_ERROR +** if the record is not well-formed, or SQLITE_OK otherwise. +*/ +static int zipfileReadLFH( + u8 *aBuffer, + ZipfileLFH *pLFH +){ + u8 *aRead = aBuffer; + int rc = SQLITE_OK; + + u32 sig = zipfileRead32(aRead); + if( sig!=ZIPFILE_SIGNATURE_LFH ){ + rc = SQLITE_ERROR; + }else{ + pLFH->iVersionExtract = zipfileRead16(aRead); + pLFH->flags = zipfileRead16(aRead); + pLFH->iCompression = zipfileRead16(aRead); + pLFH->mTime = zipfileRead16(aRead); + pLFH->mDate = zipfileRead16(aRead); + pLFH->crc32 = zipfileRead32(aRead); + pLFH->szCompressed = zipfileRead32(aRead); + pLFH->szUncompressed = zipfileRead32(aRead); + pLFH->nFile = zipfileRead16(aRead); + pLFH->nExtra = zipfileRead16(aRead); + } + return rc; +} + + +/* +** Buffer aExtra (size nExtra bytes) contains zip archive "extra" fields. +** Scan through this buffer to find an "extra-timestamp" field. If one +** exists, extract the 32-bit modification-timestamp from it and store +** the value in output parameter *pmTime. +** +** Zero is returned if no extra-timestamp record could be found (and so +** *pmTime is left unchanged), or non-zero otherwise. +** +** The general format of an extra field is: +** +** Header ID 2 bytes +** Data Size 2 bytes +** Data N bytes +*/ +static int zipfileScanExtra(u8 *aExtra, int nExtra, u32 *pmTime){ + int ret = 0; + u8 *p = aExtra; + u8 *pEnd = &aExtra[nExtra]; + + while( p modtime is present */ + *pmTime = zipfileGetU32(&p[1]); + ret = 1; + } + break; + } + } + + p += nByte; + } + return ret; +} + +/* +** Convert the standard MS-DOS timestamp stored in the mTime and mDate +** fields of the CDS structure passed as the only argument to a 32-bit +** UNIX seconds-since-the-epoch timestamp. Return the result. +** +** "Standard" MS-DOS time format: +** +** File modification time: +** Bits 00-04: seconds divided by 2 +** Bits 05-10: minute +** Bits 11-15: hour +** File modification date: +** Bits 00-04: day +** Bits 05-08: month (1-12) +** Bits 09-15: years from 1980 +** +** https://msdn.microsoft.com/en-us/library/9kkf9tah.aspx +*/ +static u32 zipfileMtime(ZipfileCDS *pCDS){ + int Y = (1980 + ((pCDS->mDate >> 9) & 0x7F)); + int M = ((pCDS->mDate >> 5) & 0x0F); + int D = (pCDS->mDate & 0x1F); + int B = -13; + + int sec = (pCDS->mTime & 0x1F)*2; + int min = (pCDS->mTime >> 5) & 0x3F; + int hr = (pCDS->mTime >> 11) & 0x1F; + i64 JD; + + /* JD = INT(365.25 * (Y+4716)) + INT(30.6001 * (M+1)) + D + B - 1524.5 */ + + /* Calculate the JD in seconds for noon on the day in question */ + if( M<3 ){ + Y = Y-1; + M = M+12; + } + JD = (i64)(24*60*60) * ( + (int)(365.25 * (Y + 4716)) + + (int)(30.6001 * (M + 1)) + + D + B - 1524 + ); + + /* Correct the JD for the time within the day */ + JD += (hr-12) * 3600 + min * 60 + sec; + + /* Convert JD to unix timestamp (the JD epoch is 2440587.5) */ + return (u32)(JD - (i64)(24405875) * 24*60*6); +} + +/* +** The opposite of zipfileMtime(). This function populates the mTime and +** mDate fields of the CDS structure passed as the first argument according +** to the UNIX timestamp value passed as the second. +*/ +static void zipfileMtimeToDos(ZipfileCDS *pCds, u32 mUnixTime){ + /* Convert unix timestamp to JD (2440588 is noon on 1/1/1970) */ + i64 JD = (i64)2440588 + mUnixTime / (24*60*60); + + int A, B, C, D, E; + int yr, mon, day; + int hr, min, sec; + + A = (int)((JD - 1867216.25)/36524.25); + A = (int)(JD + 1 + A - (A/4)); + B = A + 1524; + C = (int)((B - 122.1)/365.25); + D = (36525*(C&32767))/100; + E = (int)((B-D)/30.6001); + + day = B - D - (int)(30.6001*E); + mon = (E<14 ? E-1 : E-13); + yr = mon>2 ? C-4716 : C-4715; + + hr = (mUnixTime % (24*60*60)) / (60*60); + min = (mUnixTime % (60*60)) / 60; + sec = (mUnixTime % 60); + + if( yr>=1980 ){ + pCds->mDate = (u16)(day + (mon << 5) + ((yr-1980) << 9)); + pCds->mTime = (u16)(sec/2 + (min<<5) + (hr<<11)); + }else{ + pCds->mDate = pCds->mTime = 0; + } + + assert( mUnixTime<315507600 + || mUnixTime==zipfileMtime(pCds) + || ((mUnixTime % 2) && mUnixTime-1==zipfileMtime(pCds)) + /* || (mUnixTime % 2) */ + ); +} + +/* +** If aBlob is not NULL, then it is a pointer to a buffer (nBlob bytes in +** size) containing an entire zip archive image. Or, if aBlob is NULL, +** then pFile is a file-handle open on a zip file. In either case, this +** function creates a ZipfileEntry object based on the zip archive entry +** for which the CDS record is at offset iOff. +** +** If successful, SQLITE_OK is returned and (*ppEntry) set to point to +** the new object. Otherwise, an SQLite error code is returned and the +** final value of (*ppEntry) undefined. +*/ +static int zipfileGetEntry( + ZipfileTab *pTab, /* Store any error message here */ + const u8 *aBlob, /* Pointer to in-memory file image */ + int nBlob, /* Size of aBlob[] in bytes */ + FILE *pFile, /* If aBlob==0, read from this file */ + i64 iOff, /* Offset of CDS record */ + ZipfileEntry **ppEntry /* OUT: Pointer to new object */ +){ + u8 *aRead; + char **pzErr = &pTab->base.zErrMsg; + int rc = SQLITE_OK; + + if( aBlob==0 ){ + aRead = pTab->aBuffer; + rc = zipfileReadData(pFile, aRead, ZIPFILE_CDS_FIXED_SZ, iOff, pzErr); + }else{ + aRead = (u8*)&aBlob[iOff]; + } + + if( rc==SQLITE_OK ){ + int nAlloc; + ZipfileEntry *pNew; + + int nFile = zipfileGetU16(&aRead[ZIPFILE_CDS_NFILE_OFF]); + int nExtra = zipfileGetU16(&aRead[ZIPFILE_CDS_NFILE_OFF+2]); + nExtra += zipfileGetU16(&aRead[ZIPFILE_CDS_NFILE_OFF+4]); + + nAlloc = sizeof(ZipfileEntry) + nExtra; + if( aBlob ){ + nAlloc += zipfileGetU32(&aRead[ZIPFILE_CDS_SZCOMPRESSED_OFF]); + } + + pNew = (ZipfileEntry*)sqlite3_malloc(nAlloc); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(pNew, 0, sizeof(ZipfileEntry)); + rc = zipfileReadCDS(aRead, &pNew->cds); + if( rc!=SQLITE_OK ){ + *pzErr = sqlite3_mprintf("failed to read CDS at offset %lld", iOff); + }else if( aBlob==0 ){ + rc = zipfileReadData( + pFile, aRead, nExtra+nFile, iOff+ZIPFILE_CDS_FIXED_SZ, pzErr + ); + }else{ + aRead = (u8*)&aBlob[iOff + ZIPFILE_CDS_FIXED_SZ]; + } + } + + if( rc==SQLITE_OK ){ + u32 *pt = &pNew->mUnixTime; + pNew->cds.zFile = sqlite3_mprintf("%.*s", nFile, aRead); + pNew->aExtra = (u8*)&pNew[1]; + memcpy(pNew->aExtra, &aRead[nFile], nExtra); + if( pNew->cds.zFile==0 ){ + rc = SQLITE_NOMEM; + }else if( 0==zipfileScanExtra(&aRead[nFile], pNew->cds.nExtra, pt) ){ + pNew->mUnixTime = zipfileMtime(&pNew->cds); + } + } + + if( rc==SQLITE_OK ){ + static const int szFix = ZIPFILE_LFH_FIXED_SZ; + ZipfileLFH lfh; + if( pFile ){ + rc = zipfileReadData(pFile, aRead, szFix, pNew->cds.iOffset, pzErr); + }else{ + aRead = (u8*)&aBlob[pNew->cds.iOffset]; + } + + rc = zipfileReadLFH(aRead, &lfh); + if( rc==SQLITE_OK ){ + pNew->iDataOff = pNew->cds.iOffset + ZIPFILE_LFH_FIXED_SZ; + pNew->iDataOff += lfh.nFile + lfh.nExtra; + if( aBlob && pNew->cds.szCompressed ){ + pNew->aData = &pNew->aExtra[nExtra]; + memcpy(pNew->aData, &aBlob[pNew->iDataOff], pNew->cds.szCompressed); + } + }else{ + *pzErr = sqlite3_mprintf("failed to read LFH at offset %d", + (int)pNew->cds.iOffset + ); + } + } + + if( rc!=SQLITE_OK ){ + zipfileEntryFree(pNew); + }else{ + *ppEntry = pNew; + } + } + + return rc; +} + +/* +** Advance an ZipfileCsr to its next row of output. +*/ +static int zipfileNext(sqlite3_vtab_cursor *cur){ + ZipfileCsr *pCsr = (ZipfileCsr*)cur; + int rc = SQLITE_OK; + + if( pCsr->pFile ){ + i64 iEof = pCsr->eocd.iOffset + pCsr->eocd.nSize; + zipfileEntryFree(pCsr->pCurrent); + pCsr->pCurrent = 0; + if( pCsr->iNextOff>=iEof ){ + pCsr->bEof = 1; + }else{ + ZipfileEntry *p = 0; + ZipfileTab *pTab = (ZipfileTab*)(cur->pVtab); + rc = zipfileGetEntry(pTab, 0, 0, pCsr->pFile, pCsr->iNextOff, &p); + if( rc==SQLITE_OK ){ + pCsr->iNextOff += ZIPFILE_CDS_FIXED_SZ; + pCsr->iNextOff += (int)p->cds.nExtra + p->cds.nFile + p->cds.nComment; + } + pCsr->pCurrent = p; + } + }else{ + if( !pCsr->bNoop ){ + pCsr->pCurrent = pCsr->pCurrent->pNext; + } + if( pCsr->pCurrent==0 ){ + pCsr->bEof = 1; + } + } + + pCsr->bNoop = 0; + return rc; +} + +static void zipfileFree(void *p) { + sqlite3_free(p); +} + +/* +** Buffer aIn (size nIn bytes) contains compressed data. Uncompressed, the +** size is nOut bytes. This function uncompresses the data and sets the +** return value in context pCtx to the result (a blob). +** +** If an error occurs, an error code is left in pCtx instead. +*/ +static void zipfileInflate( + sqlite3_context *pCtx, /* Store result here */ + const u8 *aIn, /* Compressed data */ + int nIn, /* Size of buffer aIn[] in bytes */ + int nOut /* Expected output size */ +){ + u8 *aRes = sqlite3_malloc(nOut); + if( aRes==0 ){ + sqlite3_result_error_nomem(pCtx); + }else{ + int err; + z_stream str; + memset(&str, 0, sizeof(str)); + + str.next_in = (Byte*)aIn; + str.avail_in = nIn; + str.next_out = (Byte*)aRes; + str.avail_out = nOut; + + err = inflateInit2(&str, -15); + if( err!=Z_OK ){ + zipfileCtxErrorMsg(pCtx, "inflateInit2() failed (%d)", err); + }else{ + err = inflate(&str, Z_NO_FLUSH); + if( err!=Z_STREAM_END ){ + zipfileCtxErrorMsg(pCtx, "inflate() failed (%d)", err); + }else{ + sqlite3_result_blob(pCtx, aRes, nOut, zipfileFree); + aRes = 0; + } + } + sqlite3_free(aRes); + inflateEnd(&str); + } +} + +/* +** Buffer aIn (size nIn bytes) contains uncompressed data. This function +** compresses it and sets (*ppOut) to point to a buffer containing the +** compressed data. The caller is responsible for eventually calling +** sqlite3_free() to release buffer (*ppOut). Before returning, (*pnOut) +** is set to the size of buffer (*ppOut) in bytes. +** +** If no error occurs, SQLITE_OK is returned. Otherwise, an SQLite error +** code is returned and an error message left in virtual-table handle +** pTab. The values of (*ppOut) and (*pnOut) are left unchanged in this +** case. +*/ +static int zipfileDeflate( + const u8 *aIn, int nIn, /* Input */ + u8 **ppOut, int *pnOut, /* Output */ + char **pzErr /* OUT: Error message */ +){ + int nAlloc = (int)compressBound(nIn); + u8 *aOut; + int rc = SQLITE_OK; + + aOut = (u8*)sqlite3_malloc(nAlloc); + if( aOut==0 ){ + rc = SQLITE_NOMEM; + }else{ + int res; + z_stream str; + memset(&str, 0, sizeof(str)); + str.next_in = (Bytef*)aIn; + str.avail_in = nIn; + str.next_out = aOut; + str.avail_out = nAlloc; + + deflateInit2(&str, 9, Z_DEFLATED, -15, 8, Z_DEFAULT_STRATEGY); + res = deflate(&str, Z_FINISH); + + if( res==Z_STREAM_END ){ + *ppOut = aOut; + *pnOut = (int)str.total_out; + }else{ + sqlite3_free(aOut); + *pzErr = sqlite3_mprintf("zipfile: deflate() error"); + rc = SQLITE_ERROR; + } + deflateEnd(&str); + } + + return rc; +} + + +/* +** Return values of columns for the row at which the series_cursor +** is currently pointing. +*/ +static int zipfileColumn( + sqlite3_vtab_cursor *cur, /* The cursor */ + sqlite3_context *ctx, /* First argument to sqlite3_result_...() */ + int i /* Which column to return */ +){ + ZipfileCsr *pCsr = (ZipfileCsr*)cur; + ZipfileCDS *pCDS = &pCsr->pCurrent->cds; + int rc = SQLITE_OK; + switch( i ){ + case 0: /* name */ + sqlite3_result_text(ctx, pCDS->zFile, -1, SQLITE_TRANSIENT); + break; + case 1: /* mode */ + /* TODO: Whether or not the following is correct surely depends on + ** the platform on which the archive was created. */ + sqlite3_result_int(ctx, pCDS->iExternalAttr >> 16); + break; + case 2: { /* mtime */ + sqlite3_result_int64(ctx, pCsr->pCurrent->mUnixTime); + break; + } + case 3: { /* sz */ + if( sqlite3_vtab_nochange(ctx)==0 ){ + sqlite3_result_int64(ctx, pCDS->szUncompressed); + } + break; + } + case 4: /* rawdata */ + if( sqlite3_vtab_nochange(ctx) ) break; + case 5: { /* data */ + if( i==4 || pCDS->iCompression==0 || pCDS->iCompression==8 ){ + int sz = pCDS->szCompressed; + int szFinal = pCDS->szUncompressed; + if( szFinal>0 ){ + u8 *aBuf; + u8 *aFree = 0; + if( pCsr->pCurrent->aData ){ + aBuf = pCsr->pCurrent->aData; + }else{ + aBuf = aFree = sqlite3_malloc(sz); + if( aBuf==0 ){ + rc = SQLITE_NOMEM; + }else{ + FILE *pFile = pCsr->pFile; + if( pFile==0 ){ + pFile = ((ZipfileTab*)(pCsr->base.pVtab))->pWriteFd; + } + rc = zipfileReadData(pFile, aBuf, sz, pCsr->pCurrent->iDataOff, + &pCsr->base.pVtab->zErrMsg + ); + } + } + if( rc==SQLITE_OK ){ + if( i==5 && pCDS->iCompression ){ + zipfileInflate(ctx, aBuf, sz, szFinal); + }else{ + sqlite3_result_blob(ctx, aBuf, sz, SQLITE_TRANSIENT); + } + } + sqlite3_free(aFree); + }else{ + /* Figure out if this is a directory or a zero-sized file. Consider + ** it to be a directory either if the mode suggests so, or if + ** the final character in the name is '/'. */ + u32 mode = pCDS->iExternalAttr >> 16; + if( !(mode & S_IFDIR) && pCDS->zFile[pCDS->nFile-1]!='/' ){ + sqlite3_result_blob(ctx, "", 0, SQLITE_STATIC); + } + } + } + break; + } + case 6: /* method */ + sqlite3_result_int(ctx, pCDS->iCompression); + break; + default: /* z */ + assert( i==7 ); + sqlite3_result_int64(ctx, pCsr->iId); + break; + } + + return rc; +} + +/* +** Return TRUE if the cursor is at EOF. +*/ +static int zipfileEof(sqlite3_vtab_cursor *cur){ + ZipfileCsr *pCsr = (ZipfileCsr*)cur; + return pCsr->bEof; +} + +/* +** If aBlob is not NULL, then it points to a buffer nBlob bytes in size +** containing an entire zip archive image. Or, if aBlob is NULL, then pFile +** is guaranteed to be a file-handle open on a zip file. +** +** This function attempts to locate the EOCD record within the zip archive +** and populate *pEOCD with the results of decoding it. SQLITE_OK is +** returned if successful. Otherwise, an SQLite error code is returned and +** an English language error message may be left in virtual-table pTab. +*/ +static int zipfileReadEOCD( + ZipfileTab *pTab, /* Return errors here */ + const u8 *aBlob, /* Pointer to in-memory file image */ + int nBlob, /* Size of aBlob[] in bytes */ + FILE *pFile, /* Read from this file if aBlob==0 */ + ZipfileEOCD *pEOCD /* Object to populate */ +){ + u8 *aRead = pTab->aBuffer; /* Temporary buffer */ + int nRead; /* Bytes to read from file */ + int rc = SQLITE_OK; + + if( aBlob==0 ){ + i64 iOff; /* Offset to read from */ + i64 szFile; /* Total size of file in bytes */ + fseek(pFile, 0, SEEK_END); + szFile = (i64)ftell(pFile); + if( szFile==0 ){ + memset(pEOCD, 0, sizeof(ZipfileEOCD)); + return SQLITE_OK; + } + nRead = (int)(MIN(szFile, ZIPFILE_BUFFER_SIZE)); + iOff = szFile - nRead; + rc = zipfileReadData(pFile, aRead, nRead, iOff, &pTab->base.zErrMsg); + }else{ + nRead = (int)(MIN(nBlob, ZIPFILE_BUFFER_SIZE)); + aRead = (u8*)&aBlob[nBlob-nRead]; + } + + if( rc==SQLITE_OK ){ + int i; + + /* Scan backwards looking for the signature bytes */ + for(i=nRead-20; i>=0; i--){ + if( aRead[i]==0x50 && aRead[i+1]==0x4b + && aRead[i+2]==0x05 && aRead[i+3]==0x06 + ){ + break; + } + } + if( i<0 ){ + pTab->base.zErrMsg = sqlite3_mprintf( + "cannot find end of central directory record" + ); + return SQLITE_ERROR; + } + + aRead += i+4; + pEOCD->iDisk = zipfileRead16(aRead); + pEOCD->iFirstDisk = zipfileRead16(aRead); + pEOCD->nEntry = zipfileRead16(aRead); + pEOCD->nEntryTotal = zipfileRead16(aRead); + pEOCD->nSize = zipfileRead32(aRead); + pEOCD->iOffset = zipfileRead32(aRead); + } + + return rc; +} + +/* +** Add object pNew to the linked list that begins at ZipfileTab.pFirstEntry +** and ends with pLastEntry. If argument pBefore is NULL, then pNew is added +** to the end of the list. Otherwise, it is added to the list immediately +** before pBefore (which is guaranteed to be a part of said list). +*/ +static void zipfileAddEntry( + ZipfileTab *pTab, + ZipfileEntry *pBefore, + ZipfileEntry *pNew +){ + assert( (pTab->pFirstEntry==0)==(pTab->pLastEntry==0) ); + assert( pNew->pNext==0 ); + if( pBefore==0 ){ + if( pTab->pFirstEntry==0 ){ + pTab->pFirstEntry = pTab->pLastEntry = pNew; + }else{ + assert( pTab->pLastEntry->pNext==0 ); + pTab->pLastEntry->pNext = pNew; + pTab->pLastEntry = pNew; + } + }else{ + ZipfileEntry **pp; + for(pp=&pTab->pFirstEntry; *pp!=pBefore; pp=&((*pp)->pNext)); + pNew->pNext = pBefore; + *pp = pNew; + } +} + +static int zipfileLoadDirectory(ZipfileTab *pTab, const u8 *aBlob, int nBlob){ + ZipfileEOCD eocd; + int rc; + int i; + i64 iOff; + + rc = zipfileReadEOCD(pTab, aBlob, nBlob, pTab->pWriteFd, &eocd); + iOff = eocd.iOffset; + for(i=0; rc==SQLITE_OK && ipWriteFd, iOff, &pNew); + + if( rc==SQLITE_OK ){ + zipfileAddEntry(pTab, 0, pNew); + iOff += ZIPFILE_CDS_FIXED_SZ; + iOff += (int)pNew->cds.nExtra + pNew->cds.nFile + pNew->cds.nComment; + } + } + return rc; +} + +/* +** xFilter callback. +*/ +static int zipfileFilter( + sqlite3_vtab_cursor *cur, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + ZipfileTab *pTab = (ZipfileTab*)cur->pVtab; + ZipfileCsr *pCsr = (ZipfileCsr*)cur; + const char *zFile = 0; /* Zip file to scan */ + int rc = SQLITE_OK; /* Return Code */ + int bInMemory = 0; /* True for an in-memory zipfile */ + + zipfileResetCursor(pCsr); + + if( pTab->zFile ){ + zFile = pTab->zFile; + }else if( idxNum==0 ){ + zipfileCursorErr(pCsr, "zipfile() function requires an argument"); + return SQLITE_ERROR; + }else if( sqlite3_value_type(argv[0])==SQLITE_BLOB ){ + const u8 *aBlob = (const u8*)sqlite3_value_blob(argv[0]); + int nBlob = sqlite3_value_bytes(argv[0]); + assert( pTab->pFirstEntry==0 ); + rc = zipfileLoadDirectory(pTab, aBlob, nBlob); + pCsr->pFreeEntry = pTab->pFirstEntry; + pTab->pFirstEntry = pTab->pLastEntry = 0; + if( rc!=SQLITE_OK ) return rc; + bInMemory = 1; + }else{ + zFile = (const char*)sqlite3_value_text(argv[0]); + } + + if( 0==pTab->pWriteFd && 0==bInMemory ){ + pCsr->pFile = fopen(zFile, "rb"); + if( pCsr->pFile==0 ){ + zipfileCursorErr(pCsr, "cannot open file: %s", zFile); + rc = SQLITE_ERROR; + }else{ + rc = zipfileReadEOCD(pTab, 0, 0, pCsr->pFile, &pCsr->eocd); + if( rc==SQLITE_OK ){ + if( pCsr->eocd.nEntry==0 ){ + pCsr->bEof = 1; + }else{ + pCsr->iNextOff = pCsr->eocd.iOffset; + rc = zipfileNext(cur); + } + } + } + }else{ + pCsr->bNoop = 1; + pCsr->pCurrent = pCsr->pFreeEntry ? pCsr->pFreeEntry : pTab->pFirstEntry; + rc = zipfileNext(cur); + } + + return rc; +} + +/* +** xBestIndex callback. +*/ +static int zipfileBestIndex( + sqlite3_vtab *tab, + sqlite3_index_info *pIdxInfo +){ + int i; + int idx = -1; + int unusable = 0; + + for(i=0; inConstraint; i++){ + const struct sqlite3_index_constraint *pCons = &pIdxInfo->aConstraint[i]; + if( pCons->iColumn!=ZIPFILE_F_COLUMN_IDX ) continue; + if( pCons->usable==0 ){ + unusable = 1; + }else if( pCons->op==SQLITE_INDEX_CONSTRAINT_EQ ){ + idx = i; + } + } + if( idx>=0 ){ + pIdxInfo->aConstraintUsage[idx].argvIndex = 1; + pIdxInfo->aConstraintUsage[idx].omit = 1; + pIdxInfo->estimatedCost = 1000.0; + pIdxInfo->idxNum = 1; + }else if( unusable ){ + return SQLITE_CONSTRAINT; + } + return SQLITE_OK; +} + +static ZipfileEntry *zipfileNewEntry(const char *zPath){ + ZipfileEntry *pNew; + pNew = sqlite3_malloc(sizeof(ZipfileEntry)); + if( pNew ){ + memset(pNew, 0, sizeof(ZipfileEntry)); + pNew->cds.zFile = sqlite3_mprintf("%s", zPath); + if( pNew->cds.zFile==0 ){ + sqlite3_free(pNew); + pNew = 0; + } + } + return pNew; +} + +static int zipfileSerializeLFH(ZipfileEntry *pEntry, u8 *aBuf){ + ZipfileCDS *pCds = &pEntry->cds; + u8 *a = aBuf; + + pCds->nExtra = 9; + + /* Write the LFH itself */ + zipfileWrite32(a, ZIPFILE_SIGNATURE_LFH); + zipfileWrite16(a, pCds->iVersionExtract); + zipfileWrite16(a, pCds->flags); + zipfileWrite16(a, pCds->iCompression); + zipfileWrite16(a, pCds->mTime); + zipfileWrite16(a, pCds->mDate); + zipfileWrite32(a, pCds->crc32); + zipfileWrite32(a, pCds->szCompressed); + zipfileWrite32(a, pCds->szUncompressed); + zipfileWrite16(a, (u16)pCds->nFile); + zipfileWrite16(a, pCds->nExtra); + assert( a==&aBuf[ZIPFILE_LFH_FIXED_SZ] ); + + /* Add the file name */ + memcpy(a, pCds->zFile, (int)pCds->nFile); + a += (int)pCds->nFile; + + /* The "extra" data */ + zipfileWrite16(a, ZIPFILE_EXTRA_TIMESTAMP); + zipfileWrite16(a, 5); + *a++ = 0x01; + zipfileWrite32(a, pEntry->mUnixTime); + + return a-aBuf; +} + +static int zipfileAppendEntry( + ZipfileTab *pTab, + ZipfileEntry *pEntry, + const u8 *pData, + int nData +){ + u8 *aBuf = pTab->aBuffer; + int nBuf; + int rc; + + nBuf = zipfileSerializeLFH(pEntry, aBuf); + rc = zipfileAppendData(pTab, aBuf, nBuf); + if( rc==SQLITE_OK ){ + pEntry->iDataOff = pTab->szCurrent; + rc = zipfileAppendData(pTab, pData, nData); + } + + return rc; +} + +static int zipfileGetMode( + sqlite3_value *pVal, + int bIsDir, /* If true, default to directory */ + u32 *pMode, /* OUT: Mode value */ + char **pzErr /* OUT: Error message */ +){ + const char *z = (const char*)sqlite3_value_text(pVal); + u32 mode = 0; + if( z==0 ){ + mode = (bIsDir ? (S_IFDIR + 0755) : (S_IFREG + 0644)); + }else if( z[0]>='0' && z[0]<='9' ){ + mode = (unsigned int)sqlite3_value_int(pVal); + }else{ + const char zTemplate[11] = "-rwxrwxrwx"; + int i; + if( strlen(z)!=10 ) goto parse_error; + switch( z[0] ){ + case '-': mode |= S_IFREG; break; + case 'd': mode |= S_IFDIR; break; + case 'l': mode |= S_IFLNK; break; + default: goto parse_error; + } + for(i=1; i<10; i++){ + if( z[i]==zTemplate[i] ) mode |= 1 << (9-i); + else if( z[i]!='-' ) goto parse_error; + } + } + if( ((mode & S_IFDIR)==0)==bIsDir ){ + /* The "mode" attribute is a directory, but data has been specified. + ** Or vice-versa - no data but "mode" is a file or symlink. */ + *pzErr = sqlite3_mprintf("zipfile: mode does not match data"); + return SQLITE_CONSTRAINT; + } + *pMode = mode; + return SQLITE_OK; + + parse_error: + *pzErr = sqlite3_mprintf("zipfile: parse error in mode: %s", z); + return SQLITE_ERROR; +} + +/* +** Both (const char*) arguments point to nul-terminated strings. Argument +** nB is the value of strlen(zB). This function returns 0 if the strings are +** identical, ignoring any trailing '/' character in either path. */ +static int zipfileComparePath(const char *zA, const char *zB, int nB){ + int nA = (int)strlen(zA); + if( zA[nA-1]=='/' ) nA--; + if( zB[nB-1]=='/' ) nB--; + if( nA==nB && memcmp(zA, zB, nA)==0 ) return 0; + return 1; +} + +static int zipfileBegin(sqlite3_vtab *pVtab){ + ZipfileTab *pTab = (ZipfileTab*)pVtab; + int rc = SQLITE_OK; + + assert( pTab->pWriteFd==0 ); + + /* Open a write fd on the file. Also load the entire central directory + ** structure into memory. During the transaction any new file data is + ** appended to the archive file, but the central directory is accumulated + ** in main-memory until the transaction is committed. */ + pTab->pWriteFd = fopen(pTab->zFile, "ab+"); + if( pTab->pWriteFd==0 ){ + pTab->base.zErrMsg = sqlite3_mprintf( + "zipfile: failed to open file %s for writing", pTab->zFile + ); + rc = SQLITE_ERROR; + }else{ + fseek(pTab->pWriteFd, 0, SEEK_END); + pTab->szCurrent = pTab->szOrig = (i64)ftell(pTab->pWriteFd); + rc = zipfileLoadDirectory(pTab, 0, 0); + } + + if( rc!=SQLITE_OK ){ + zipfileCleanupTransaction(pTab); + } + + return rc; +} + +/* +** Return the current time as a 32-bit timestamp in UNIX epoch format (like +** time(2)). +*/ +static u32 zipfileTime(void){ + sqlite3_vfs *pVfs = sqlite3_vfs_find(0); + u32 ret; + if( pVfs->iVersion>=2 && pVfs->xCurrentTimeInt64 ){ + i64 ms; + pVfs->xCurrentTimeInt64(pVfs, &ms); + ret = (u32)((ms/1000) - ((i64)24405875 * 8640)); + }else{ + double day; + pVfs->xCurrentTime(pVfs, &day); + ret = (u32)((day - 2440587.5) * 86400); + } + return ret; +} + +/* +** Return a 32-bit timestamp in UNIX epoch format. +** +** If the value passed as the only argument is either NULL or an SQL NULL, +** return the current time. Otherwise, return the value stored in (*pVal) +** cast to a 32-bit unsigned integer. +*/ +static u32 zipfileGetTime(sqlite3_value *pVal){ + if( pVal==0 || sqlite3_value_type(pVal)==SQLITE_NULL ){ + return zipfileTime(); + } + return (u32)sqlite3_value_int64(pVal); +} + +/* +** Unless it is NULL, entry pOld is currently part of the pTab->pFirstEntry +** linked list. Remove it from the list and free the object. +*/ +static void zipfileRemoveEntryFromList(ZipfileTab *pTab, ZipfileEntry *pOld){ + if( pOld ){ + ZipfileEntry **pp; + for(pp=&pTab->pFirstEntry; (*pp)!=pOld; pp=&((*pp)->pNext)); + *pp = (*pp)->pNext; + zipfileEntryFree(pOld); + } +} + +/* +** xUpdate method. +*/ +static int zipfileUpdate( + sqlite3_vtab *pVtab, + int nVal, + sqlite3_value **apVal, + sqlite_int64 *pRowid +){ + ZipfileTab *pTab = (ZipfileTab*)pVtab; + int rc = SQLITE_OK; /* Return Code */ + ZipfileEntry *pNew = 0; /* New in-memory CDS entry */ + + u32 mode = 0; /* Mode for new entry */ + u32 mTime = 0; /* Modification time for new entry */ + i64 sz = 0; /* Uncompressed size */ + const char *zPath = 0; /* Path for new entry */ + int nPath = 0; /* strlen(zPath) */ + const u8 *pData = 0; /* Pointer to buffer containing content */ + int nData = 0; /* Size of pData buffer in bytes */ + int iMethod = 0; /* Compression method for new entry */ + u8 *pFree = 0; /* Free this */ + char *zFree = 0; /* Also free this */ + ZipfileEntry *pOld = 0; + ZipfileEntry *pOld2 = 0; + int bUpdate = 0; /* True for an update that modifies "name" */ + int bIsDir = 0; + u32 iCrc32 = 0; + + if( pTab->pWriteFd==0 ){ + rc = zipfileBegin(pVtab); + if( rc!=SQLITE_OK ) return rc; + } + + /* If this is a DELETE or UPDATE, find the archive entry to delete. */ + if( sqlite3_value_type(apVal[0])!=SQLITE_NULL ){ + const char *zDelete = (const char*)sqlite3_value_text(apVal[0]); + int nDelete = (int)strlen(zDelete); + if( nVal>1 ){ + const char *zUpdate = (const char*)sqlite3_value_text(apVal[1]); + if( zUpdate && zipfileComparePath(zUpdate, zDelete, nDelete)!=0 ){ + bUpdate = 1; + } + } + for(pOld=pTab->pFirstEntry; 1; pOld=pOld->pNext){ + if( zipfileComparePath(pOld->cds.zFile, zDelete, nDelete)==0 ){ + break; + } + assert( pOld->pNext ); + } + } + + if( nVal>1 ){ + /* Check that "sz" and "rawdata" are both NULL: */ + if( sqlite3_value_type(apVal[5])!=SQLITE_NULL ){ + zipfileTableErr(pTab, "sz must be NULL"); + rc = SQLITE_CONSTRAINT; + } + if( sqlite3_value_type(apVal[6])!=SQLITE_NULL ){ + zipfileTableErr(pTab, "rawdata must be NULL"); + rc = SQLITE_CONSTRAINT; + } + + if( rc==SQLITE_OK ){ + if( sqlite3_value_type(apVal[7])==SQLITE_NULL ){ + /* data=NULL. A directory */ + bIsDir = 1; + }else{ + /* Value specified for "data", and possibly "method". This must be + ** a regular file or a symlink. */ + const u8 *aIn = sqlite3_value_blob(apVal[7]); + int nIn = sqlite3_value_bytes(apVal[7]); + int bAuto = sqlite3_value_type(apVal[8])==SQLITE_NULL; + + iMethod = sqlite3_value_int(apVal[8]); + sz = nIn; + pData = aIn; + nData = nIn; + if( iMethod!=0 && iMethod!=8 ){ + zipfileTableErr(pTab, "unknown compression method: %d", iMethod); + rc = SQLITE_CONSTRAINT; + }else{ + if( bAuto || iMethod ){ + int nCmp; + rc = zipfileDeflate(aIn, nIn, &pFree, &nCmp, &pTab->base.zErrMsg); + if( rc==SQLITE_OK ){ + if( iMethod || nCmpbase.zErrMsg); + } + + if( rc==SQLITE_OK ){ + zPath = (const char*)sqlite3_value_text(apVal[2]); + nPath = (int)strlen(zPath); + mTime = zipfileGetTime(apVal[4]); + } + + if( rc==SQLITE_OK && bIsDir ){ + /* For a directory, check that the last character in the path is a + ** '/'. This appears to be required for compatibility with info-zip + ** (the unzip command on unix). It does not create directories + ** otherwise. */ + if( zPath[nPath-1]!='/' ){ + zFree = sqlite3_mprintf("%s/", zPath); + if( zFree==0 ){ rc = SQLITE_NOMEM; } + zPath = (const char*)zFree; + nPath++; + } + } + + /* Check that we're not inserting a duplicate entry -OR- updating an + ** entry with a path, thereby making it into a duplicate. */ + if( (pOld==0 || bUpdate) && rc==SQLITE_OK ){ + ZipfileEntry *p; + for(p=pTab->pFirstEntry; p; p=p->pNext){ + if( zipfileComparePath(p->cds.zFile, zPath, nPath)==0 ){ + switch( sqlite3_vtab_on_conflict(pTab->db) ){ + case SQLITE_IGNORE: { + goto zipfile_update_done; + } + case SQLITE_REPLACE: { + pOld2 = p; + break; + } + default: { + zipfileTableErr(pTab, "duplicate name: \"%s\"", zPath); + rc = SQLITE_CONSTRAINT; + break; + } + } + break; + } + } + } + + if( rc==SQLITE_OK ){ + /* Create the new CDS record. */ + pNew = zipfileNewEntry(zPath); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + pNew->cds.iVersionMadeBy = ZIPFILE_NEWENTRY_MADEBY; + pNew->cds.iVersionExtract = ZIPFILE_NEWENTRY_REQUIRED; + pNew->cds.flags = ZIPFILE_NEWENTRY_FLAGS; + pNew->cds.iCompression = (u16)iMethod; + zipfileMtimeToDos(&pNew->cds, mTime); + pNew->cds.crc32 = iCrc32; + pNew->cds.szCompressed = nData; + pNew->cds.szUncompressed = (u32)sz; + pNew->cds.iExternalAttr = (mode<<16); + pNew->cds.iOffset = (u32)pTab->szCurrent; + pNew->cds.nFile = (u16)nPath; + pNew->mUnixTime = (u32)mTime; + rc = zipfileAppendEntry(pTab, pNew, pData, nData); + zipfileAddEntry(pTab, pOld, pNew); + } + } + } + + if( rc==SQLITE_OK && (pOld || pOld2) ){ + ZipfileCsr *pCsr; + for(pCsr=pTab->pCsrList; pCsr; pCsr=pCsr->pCsrNext){ + if( pCsr->pCurrent && (pCsr->pCurrent==pOld || pCsr->pCurrent==pOld2) ){ + pCsr->pCurrent = pCsr->pCurrent->pNext; + pCsr->bNoop = 1; + } + } + + zipfileRemoveEntryFromList(pTab, pOld); + zipfileRemoveEntryFromList(pTab, pOld2); + } + +zipfile_update_done: + sqlite3_free(pFree); + sqlite3_free(zFree); + return rc; +} + +static int zipfileSerializeEOCD(ZipfileEOCD *p, u8 *aBuf){ + u8 *a = aBuf; + zipfileWrite32(a, ZIPFILE_SIGNATURE_EOCD); + zipfileWrite16(a, p->iDisk); + zipfileWrite16(a, p->iFirstDisk); + zipfileWrite16(a, p->nEntry); + zipfileWrite16(a, p->nEntryTotal); + zipfileWrite32(a, p->nSize); + zipfileWrite32(a, p->iOffset); + zipfileWrite16(a, 0); /* Size of trailing comment in bytes*/ + + return a-aBuf; +} + +static int zipfileAppendEOCD(ZipfileTab *pTab, ZipfileEOCD *p){ + int nBuf = zipfileSerializeEOCD(p, pTab->aBuffer); + assert( nBuf==ZIPFILE_EOCD_FIXED_SZ ); + return zipfileAppendData(pTab, pTab->aBuffer, nBuf); +} + +/* +** Serialize the CDS structure into buffer aBuf[]. Return the number +** of bytes written. +*/ +static int zipfileSerializeCDS(ZipfileEntry *pEntry, u8 *aBuf){ + u8 *a = aBuf; + ZipfileCDS *pCDS = &pEntry->cds; + + if( pEntry->aExtra==0 ){ + pCDS->nExtra = 9; + } + + zipfileWrite32(a, ZIPFILE_SIGNATURE_CDS); + zipfileWrite16(a, pCDS->iVersionMadeBy); + zipfileWrite16(a, pCDS->iVersionExtract); + zipfileWrite16(a, pCDS->flags); + zipfileWrite16(a, pCDS->iCompression); + zipfileWrite16(a, pCDS->mTime); + zipfileWrite16(a, pCDS->mDate); + zipfileWrite32(a, pCDS->crc32); + zipfileWrite32(a, pCDS->szCompressed); + zipfileWrite32(a, pCDS->szUncompressed); + assert( a==&aBuf[ZIPFILE_CDS_NFILE_OFF] ); + zipfileWrite16(a, pCDS->nFile); + zipfileWrite16(a, pCDS->nExtra); + zipfileWrite16(a, pCDS->nComment); + zipfileWrite16(a, pCDS->iDiskStart); + zipfileWrite16(a, pCDS->iInternalAttr); + zipfileWrite32(a, pCDS->iExternalAttr); + zipfileWrite32(a, pCDS->iOffset); + + memcpy(a, pCDS->zFile, pCDS->nFile); + a += pCDS->nFile; + + if( pEntry->aExtra ){ + int n = (int)pCDS->nExtra + (int)pCDS->nComment; + memcpy(a, pEntry->aExtra, n); + a += n; + }else{ + assert( pCDS->nExtra==9 ); + zipfileWrite16(a, ZIPFILE_EXTRA_TIMESTAMP); + zipfileWrite16(a, 5); + *a++ = 0x01; + zipfileWrite32(a, pEntry->mUnixTime); + } + + return a-aBuf; +} + +static int zipfileCommit(sqlite3_vtab *pVtab){ + ZipfileTab *pTab = (ZipfileTab*)pVtab; + int rc = SQLITE_OK; + if( pTab->pWriteFd ){ + i64 iOffset = pTab->szCurrent; + ZipfileEntry *p; + ZipfileEOCD eocd; + int nEntry = 0; + + /* Write out all entries */ + for(p=pTab->pFirstEntry; rc==SQLITE_OK && p; p=p->pNext){ + int n = zipfileSerializeCDS(p, pTab->aBuffer); + rc = zipfileAppendData(pTab, pTab->aBuffer, n); + nEntry++; + } + + /* Write out the EOCD record */ + eocd.iDisk = 0; + eocd.iFirstDisk = 0; + eocd.nEntry = (u16)nEntry; + eocd.nEntryTotal = (u16)nEntry; + eocd.nSize = (u32)(pTab->szCurrent - iOffset); + eocd.iOffset = (u32)iOffset; + rc = zipfileAppendEOCD(pTab, &eocd); + + zipfileCleanupTransaction(pTab); + } + return rc; +} + +static int zipfileRollback(sqlite3_vtab *pVtab){ + return zipfileCommit(pVtab); +} + +static ZipfileCsr *zipfileFindCursor(ZipfileTab *pTab, i64 iId){ + ZipfileCsr *pCsr; + for(pCsr=pTab->pCsrList; pCsr; pCsr=pCsr->pCsrNext){ + if( iId==pCsr->iId ) break; + } + return pCsr; +} + +static void zipfileFunctionCds( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + ZipfileCsr *pCsr; + ZipfileTab *pTab = (ZipfileTab*)sqlite3_user_data(context); + assert( argc>0 ); + + pCsr = zipfileFindCursor(pTab, sqlite3_value_int64(argv[0])); + if( pCsr ){ + ZipfileCDS *p = &pCsr->pCurrent->cds; + char *zRes = sqlite3_mprintf("{" + "\"version-made-by\" : %u, " + "\"version-to-extract\" : %u, " + "\"flags\" : %u, " + "\"compression\" : %u, " + "\"time\" : %u, " + "\"date\" : %u, " + "\"crc32\" : %u, " + "\"compressed-size\" : %u, " + "\"uncompressed-size\" : %u, " + "\"file-name-length\" : %u, " + "\"extra-field-length\" : %u, " + "\"file-comment-length\" : %u, " + "\"disk-number-start\" : %u, " + "\"internal-attr\" : %u, " + "\"external-attr\" : %u, " + "\"offset\" : %u }", + (u32)p->iVersionMadeBy, (u32)p->iVersionExtract, + (u32)p->flags, (u32)p->iCompression, + (u32)p->mTime, (u32)p->mDate, + (u32)p->crc32, (u32)p->szCompressed, + (u32)p->szUncompressed, (u32)p->nFile, + (u32)p->nExtra, (u32)p->nComment, + (u32)p->iDiskStart, (u32)p->iInternalAttr, + (u32)p->iExternalAttr, (u32)p->iOffset + ); + + if( zRes==0 ){ + sqlite3_result_error_nomem(context); + }else{ + sqlite3_result_text(context, zRes, -1, SQLITE_TRANSIENT); + sqlite3_free(zRes); + } + } +} + +/* +** xFindFunction method. +*/ +static int zipfileFindFunction( + sqlite3_vtab *pVtab, /* Virtual table handle */ + int nArg, /* Number of SQL function arguments */ + const char *zName, /* Name of SQL function */ + void (**pxFunc)(sqlite3_context*,int,sqlite3_value**), /* OUT: Result */ + void **ppArg /* OUT: User data for *pxFunc */ +){ + if( sqlite3_stricmp("zipfile_cds", zName)==0 ){ + *pxFunc = zipfileFunctionCds; + *ppArg = (void*)pVtab; + return 1; + } + return 0; +} + +typedef struct ZipfileBuffer ZipfileBuffer; +struct ZipfileBuffer { + u8 *a; /* Pointer to buffer */ + int n; /* Size of buffer in bytes */ + int nAlloc; /* Byte allocated at a[] */ +}; + +typedef struct ZipfileCtx ZipfileCtx; +struct ZipfileCtx { + int nEntry; + ZipfileBuffer body; + ZipfileBuffer cds; +}; + +static int zipfileBufferGrow(ZipfileBuffer *pBuf, int nByte){ + if( pBuf->n+nByte>pBuf->nAlloc ){ + u8 *aNew; + int nNew = pBuf->n ? pBuf->n*2 : 512; + int nReq = pBuf->n + nByte; + + while( nNewa, nNew); + if( aNew==0 ) return SQLITE_NOMEM; + pBuf->a = aNew; + pBuf->nAlloc = nNew; + } + return SQLITE_OK; +} + +/* +** xStep() callback for the zipfile() aggregate. This can be called in +** any of the following ways: +** +** SELECT zipfile(name,data) ... +** SELECT zipfile(name,mode,mtime,data) ... +** SELECT zipfile(name,mode,mtime,data,method) ... +*/ +void zipfileStep(sqlite3_context *pCtx, int nVal, sqlite3_value **apVal){ + ZipfileCtx *p; /* Aggregate function context */ + ZipfileEntry e; /* New entry to add to zip archive */ + + sqlite3_value *pName = 0; + sqlite3_value *pMode = 0; + sqlite3_value *pMtime = 0; + sqlite3_value *pData = 0; + sqlite3_value *pMethod = 0; + + int bIsDir = 0; + u32 mode; + int rc = SQLITE_OK; + char *zErr = 0; + + int iMethod = -1; /* Compression method to use (0 or 8) */ + + const u8 *aData = 0; /* Possibly compressed data for new entry */ + int nData = 0; /* Size of aData[] in bytes */ + int szUncompressed = 0; /* Size of data before compression */ + u8 *aFree = 0; /* Free this before returning */ + u32 iCrc32 = 0; /* crc32 of uncompressed data */ + + char *zName = 0; /* Path (name) of new entry */ + int nName = 0; /* Size of zName in bytes */ + char *zFree = 0; /* Free this before returning */ + int nByte; + + memset(&e, 0, sizeof(e)); + p = (ZipfileCtx*)sqlite3_aggregate_context(pCtx, sizeof(ZipfileCtx)); + if( p==0 ) return; + + /* Martial the arguments into stack variables */ + if( nVal!=2 && nVal!=4 && nVal!=5 ){ + zErr = sqlite3_mprintf("wrong number of arguments to function zipfile()"); + rc = SQLITE_ERROR; + goto zipfile_step_out; + } + pName = apVal[0]; + if( nVal==2 ){ + pData = apVal[1]; + }else{ + pMode = apVal[1]; + pMtime = apVal[2]; + pData = apVal[3]; + if( nVal==5 ){ + pMethod = apVal[4]; + } + } + + /* Check that the 'name' parameter looks ok. */ + zName = (char*)sqlite3_value_text(pName); + nName = sqlite3_value_bytes(pName); + if( zName==0 ){ + zErr = sqlite3_mprintf("first argument to zipfile() must be non-NULL"); + rc = SQLITE_ERROR; + goto zipfile_step_out; + } + + /* Inspect the 'method' parameter. This must be either 0 (store), 8 (use + ** deflate compression) or NULL (choose automatically). */ + if( pMethod && SQLITE_NULL!=sqlite3_value_type(pMethod) ){ + iMethod = (int)sqlite3_value_int64(pMethod); + if( iMethod!=0 && iMethod!=8 ){ + zErr = sqlite3_mprintf("illegal method value: %d", iMethod); + rc = SQLITE_ERROR; + goto zipfile_step_out; + } + } + + /* Now inspect the data. If this is NULL, then the new entry must be a + ** directory. Otherwise, figure out whether or not the data should + ** be deflated or simply stored in the zip archive. */ + if( sqlite3_value_type(pData)==SQLITE_NULL ){ + bIsDir = 1; + iMethod = 0; + }else{ + aData = sqlite3_value_blob(pData); + szUncompressed = nData = sqlite3_value_bytes(pData); + iCrc32 = crc32(0, aData, nData); + if( iMethod<0 || iMethod==8 ){ + int nOut = 0; + rc = zipfileDeflate(aData, nData, &aFree, &nOut, &zErr); + if( rc!=SQLITE_OK ){ + goto zipfile_step_out; + } + if( iMethod==8 || nOut1 && zName[nName-2]=='/' ) nName--; + } + } + + /* Assemble the ZipfileEntry object for the new zip archive entry */ + e.cds.iVersionMadeBy = ZIPFILE_NEWENTRY_MADEBY; + e.cds.iVersionExtract = ZIPFILE_NEWENTRY_REQUIRED; + e.cds.flags = ZIPFILE_NEWENTRY_FLAGS; + e.cds.iCompression = (u16)iMethod; + zipfileMtimeToDos(&e.cds, (u32)e.mUnixTime); + e.cds.crc32 = iCrc32; + e.cds.szCompressed = nData; + e.cds.szUncompressed = szUncompressed; + e.cds.iExternalAttr = (mode<<16); + e.cds.iOffset = p->body.n; + e.cds.nFile = (u16)nName; + e.cds.zFile = zName; + + /* Append the LFH to the body of the new archive */ + nByte = ZIPFILE_LFH_FIXED_SZ + e.cds.nFile + 9; + if( (rc = zipfileBufferGrow(&p->body, nByte)) ) goto zipfile_step_out; + p->body.n += zipfileSerializeLFH(&e, &p->body.a[p->body.n]); + + /* Append the data to the body of the new archive */ + if( nData>0 ){ + if( (rc = zipfileBufferGrow(&p->body, nData)) ) goto zipfile_step_out; + memcpy(&p->body.a[p->body.n], aData, nData); + p->body.n += nData; + } + + /* Append the CDS record to the directory of the new archive */ + nByte = ZIPFILE_CDS_FIXED_SZ + e.cds.nFile + 9; + if( (rc = zipfileBufferGrow(&p->cds, nByte)) ) goto zipfile_step_out; + p->cds.n += zipfileSerializeCDS(&e, &p->cds.a[p->cds.n]); + + /* Increment the count of entries in the archive */ + p->nEntry++; + + zipfile_step_out: + sqlite3_free(aFree); + sqlite3_free(zFree); + if( rc ){ + if( zErr ){ + sqlite3_result_error(pCtx, zErr, -1); + }else{ + sqlite3_result_error_code(pCtx, rc); + } + } + sqlite3_free(zErr); +} + +/* +** xFinalize() callback for zipfile aggregate function. +*/ +void zipfileFinal(sqlite3_context *pCtx){ + ZipfileCtx *p; + ZipfileEOCD eocd; + int nZip; + u8 *aZip; + + p = (ZipfileCtx*)sqlite3_aggregate_context(pCtx, sizeof(ZipfileCtx)); + if( p==0 ) return; + if( p->nEntry>0 ){ + memset(&eocd, 0, sizeof(eocd)); + eocd.nEntry = (u16)p->nEntry; + eocd.nEntryTotal = (u16)p->nEntry; + eocd.nSize = p->cds.n; + eocd.iOffset = p->body.n; + + nZip = p->body.n + p->cds.n + ZIPFILE_EOCD_FIXED_SZ; + aZip = (u8*)sqlite3_malloc(nZip); + if( aZip==0 ){ + sqlite3_result_error_nomem(pCtx); + }else{ + memcpy(aZip, p->body.a, p->body.n); + memcpy(&aZip[p->body.n], p->cds.a, p->cds.n); + zipfileSerializeEOCD(&eocd, &aZip[p->body.n + p->cds.n]); + sqlite3_result_blob(pCtx, aZip, nZip, zipfileFree); + } + } + + sqlite3_free(p->body.a); + sqlite3_free(p->cds.a); +} + + +/* +** Register the "zipfile" virtual table. +*/ +static int zipfileRegister(sqlite3 *db){ + static sqlite3_module zipfileModule = { + 1, /* iVersion */ + zipfileConnect, /* xCreate */ + zipfileConnect, /* xConnect */ + zipfileBestIndex, /* xBestIndex */ + zipfileDisconnect, /* xDisconnect */ + zipfileDisconnect, /* xDestroy */ + zipfileOpen, /* xOpen - open a cursor */ + zipfileClose, /* xClose - close a cursor */ + zipfileFilter, /* xFilter - configure scan constraints */ + zipfileNext, /* xNext - advance a cursor */ + zipfileEof, /* xEof - check for end of scan */ + zipfileColumn, /* xColumn - read data */ + 0, /* xRowid - read data */ + zipfileUpdate, /* xUpdate */ + zipfileBegin, /* xBegin */ + 0, /* xSync */ + zipfileCommit, /* xCommit */ + zipfileRollback, /* xRollback */ + zipfileFindFunction, /* xFindMethod */ + 0, /* xRename */ + }; + + int rc = sqlite3_create_module(db, "zipfile" , &zipfileModule, 0); + if( rc==SQLITE_OK ) rc = sqlite3_overload_function(db, "zipfile_cds", -1); + if( rc==SQLITE_OK ){ + rc = sqlite3_create_function(db, "zipfile", -1, SQLITE_UTF8, 0, 0, + zipfileStep, zipfileFinal + ); + } + return rc; +} +#else /* SQLITE_OMIT_VIRTUALTABLE */ +# define zipfileRegister(x) SQLITE_OK +#endif + +#ifdef _WIN32 + +#endif +int sqlite3_zipfile_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + SQLITE_EXTENSION_INIT2(pApi); + (void)pzErrMsg; /* Unused parameter */ + return zipfileRegister(db); +} + +/************************* End ../ext/misc/zipfile.c ********************/ +/************************* Begin ../ext/misc/sqlar.c ******************/ +/* +** 2017-12-17 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** Utility functions sqlar_compress() and sqlar_uncompress(). Useful +** for working with sqlar archives and used by the shell tool's built-in +** sqlar support. +*/ +SQLITE_EXTENSION_INIT1 +#include + +/* +** Implementation of the "sqlar_compress(X)" SQL function. +** +** If the type of X is SQLITE_BLOB, and compressing that blob using +** zlib utility function compress() yields a smaller blob, return the +** compressed blob. Otherwise, return a copy of X. +** +** SQLar uses the "zlib format" for compressed content. The zlib format +** contains a two-byte identification header and a four-byte checksum at +** the end. This is different from ZIP which uses the raw deflate format. +** +** Future enhancements to SQLar might add support for new compression formats. +** If so, those new formats will be identified by alternative headers in the +** compressed data. +*/ +static void sqlarCompressFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + assert( argc==1 ); + if( sqlite3_value_type(argv[0])==SQLITE_BLOB ){ + const Bytef *pData = sqlite3_value_blob(argv[0]); + uLong nData = sqlite3_value_bytes(argv[0]); + uLongf nOut = compressBound(nData); + Bytef *pOut; + + pOut = (Bytef*)sqlite3_malloc(nOut); + if( pOut==0 ){ + sqlite3_result_error_nomem(context); + return; + }else{ + if( Z_OK!=compress(pOut, &nOut, pData, nData) ){ + sqlite3_result_error(context, "error in compress()", -1); + }else if( nOut +#include +#include + +#ifndef SQLITE_OMIT_VIRTUALTABLE + +/* typedef sqlite3_int64 i64; */ +/* typedef sqlite3_uint64 u64; */ + +typedef struct IdxColumn IdxColumn; +typedef struct IdxConstraint IdxConstraint; +typedef struct IdxScan IdxScan; +typedef struct IdxStatement IdxStatement; +typedef struct IdxTable IdxTable; +typedef struct IdxWrite IdxWrite; + +#define STRLEN (int)strlen + +/* +** A temp table name that we assume no user database will actually use. +** If this assumption proves incorrect triggers on the table with the +** conflicting name will be ignored. +*/ +#define UNIQUE_TABLE_NAME "t592690916721053953805701627921227776" + +/* +** A single constraint. Equivalent to either "col = ?" or "col < ?" (or +** any other type of single-ended range constraint on a column). +** +** pLink: +** Used to temporarily link IdxConstraint objects into lists while +** creating candidate indexes. +*/ +struct IdxConstraint { + char *zColl; /* Collation sequence */ + int bRange; /* True for range, false for eq */ + int iCol; /* Constrained table column */ + int bFlag; /* Used by idxFindCompatible() */ + int bDesc; /* True if ORDER BY DESC */ + IdxConstraint *pNext; /* Next constraint in pEq or pRange list */ + IdxConstraint *pLink; /* See above */ +}; + +/* +** A single scan of a single table. +*/ +struct IdxScan { + IdxTable *pTab; /* Associated table object */ + int iDb; /* Database containing table zTable */ + i64 covering; /* Mask of columns required for cov. index */ + IdxConstraint *pOrder; /* ORDER BY columns */ + IdxConstraint *pEq; /* List of == constraints */ + IdxConstraint *pRange; /* List of < constraints */ + IdxScan *pNextScan; /* Next IdxScan object for same analysis */ +}; + +/* +** Information regarding a single database table. Extracted from +** "PRAGMA table_info" by function idxGetTableInfo(). +*/ +struct IdxColumn { + char *zName; + char *zColl; + int iPk; +}; +struct IdxTable { + int nCol; + char *zName; /* Table name */ + IdxColumn *aCol; + IdxTable *pNext; /* Next table in linked list of all tables */ +}; + +/* +** An object of the following type is created for each unique table/write-op +** seen. The objects are stored in a singly-linked list beginning at +** sqlite3expert.pWrite. +*/ +struct IdxWrite { + IdxTable *pTab; + int eOp; /* SQLITE_UPDATE, DELETE or INSERT */ + IdxWrite *pNext; +}; + +/* +** Each statement being analyzed is represented by an instance of this +** structure. +*/ +struct IdxStatement { + int iId; /* Statement number */ + char *zSql; /* SQL statement */ + char *zIdx; /* Indexes */ + char *zEQP; /* Plan */ + IdxStatement *pNext; +}; + + +/* +** A hash table for storing strings. With space for a payload string +** with each entry. Methods are: +** +** idxHashInit() +** idxHashClear() +** idxHashAdd() +** idxHashSearch() +*/ +#define IDX_HASH_SIZE 1023 +typedef struct IdxHashEntry IdxHashEntry; +typedef struct IdxHash IdxHash; +struct IdxHashEntry { + char *zKey; /* nul-terminated key */ + char *zVal; /* nul-terminated value string */ + char *zVal2; /* nul-terminated value string 2 */ + IdxHashEntry *pHashNext; /* Next entry in same hash bucket */ + IdxHashEntry *pNext; /* Next entry in hash */ +}; +struct IdxHash { + IdxHashEntry *pFirst; + IdxHashEntry *aHash[IDX_HASH_SIZE]; +}; + +/* +** sqlite3expert object. +*/ +struct sqlite3expert { + int iSample; /* Percentage of tables to sample for stat1 */ + sqlite3 *db; /* User database */ + sqlite3 *dbm; /* In-memory db for this analysis */ + sqlite3 *dbv; /* Vtab schema for this analysis */ + IdxTable *pTable; /* List of all IdxTable objects */ + IdxScan *pScan; /* List of scan objects */ + IdxWrite *pWrite; /* List of write objects */ + IdxStatement *pStatement; /* List of IdxStatement objects */ + int bRun; /* True once analysis has run */ + char **pzErrmsg; + int rc; /* Error code from whereinfo hook */ + IdxHash hIdx; /* Hash containing all candidate indexes */ + char *zCandidates; /* For EXPERT_REPORT_CANDIDATES */ +}; + + +/* +** Allocate and return nByte bytes of zeroed memory using sqlite3_malloc(). +** If the allocation fails, set *pRc to SQLITE_NOMEM and return NULL. +*/ +static void *idxMalloc(int *pRc, int nByte){ + void *pRet; + assert( *pRc==SQLITE_OK ); + assert( nByte>0 ); + pRet = sqlite3_malloc(nByte); + if( pRet ){ + memset(pRet, 0, nByte); + }else{ + *pRc = SQLITE_NOMEM; + } + return pRet; +} + +/* +** Initialize an IdxHash hash table. +*/ +static void idxHashInit(IdxHash *pHash){ + memset(pHash, 0, sizeof(IdxHash)); +} + +/* +** Reset an IdxHash hash table. +*/ +static void idxHashClear(IdxHash *pHash){ + int i; + for(i=0; iaHash[i]; pEntry; pEntry=pNext){ + pNext = pEntry->pHashNext; + sqlite3_free(pEntry->zVal2); + sqlite3_free(pEntry); + } + } + memset(pHash, 0, sizeof(IdxHash)); +} + +/* +** Return the index of the hash bucket that the string specified by the +** arguments to this function belongs. +*/ +static int idxHashString(const char *z, int n){ + unsigned int ret = 0; + int i; + for(i=0; i=0 ); + for(pEntry=pHash->aHash[iHash]; pEntry; pEntry=pEntry->pHashNext){ + if( STRLEN(pEntry->zKey)==nKey && 0==memcmp(pEntry->zKey, zKey, nKey) ){ + return 1; + } + } + pEntry = idxMalloc(pRc, sizeof(IdxHashEntry) + nKey+1 + nVal+1); + if( pEntry ){ + pEntry->zKey = (char*)&pEntry[1]; + memcpy(pEntry->zKey, zKey, nKey); + if( zVal ){ + pEntry->zVal = &pEntry->zKey[nKey+1]; + memcpy(pEntry->zVal, zVal, nVal); + } + pEntry->pHashNext = pHash->aHash[iHash]; + pHash->aHash[iHash] = pEntry; + + pEntry->pNext = pHash->pFirst; + pHash->pFirst = pEntry; + } + return 0; +} + +/* +** If zKey/nKey is present in the hash table, return a pointer to the +** hash-entry object. +*/ +static IdxHashEntry *idxHashFind(IdxHash *pHash, const char *zKey, int nKey){ + int iHash; + IdxHashEntry *pEntry; + if( nKey<0 ) nKey = STRLEN(zKey); + iHash = idxHashString(zKey, nKey); + assert( iHash>=0 ); + for(pEntry=pHash->aHash[iHash]; pEntry; pEntry=pEntry->pHashNext){ + if( STRLEN(pEntry->zKey)==nKey && 0==memcmp(pEntry->zKey, zKey, nKey) ){ + return pEntry; + } + } + return 0; +} + +/* +** If the hash table contains an entry with a key equal to the string +** passed as the final two arguments to this function, return a pointer +** to the payload string. Otherwise, if zKey/nKey is not present in the +** hash table, return NULL. +*/ +static const char *idxHashSearch(IdxHash *pHash, const char *zKey, int nKey){ + IdxHashEntry *pEntry = idxHashFind(pHash, zKey, nKey); + if( pEntry ) return pEntry->zVal; + return 0; +} + +/* +** Allocate and return a new IdxConstraint object. Set the IdxConstraint.zColl +** variable to point to a copy of nul-terminated string zColl. +*/ +static IdxConstraint *idxNewConstraint(int *pRc, const char *zColl){ + IdxConstraint *pNew; + int nColl = STRLEN(zColl); + + assert( *pRc==SQLITE_OK ); + pNew = (IdxConstraint*)idxMalloc(pRc, sizeof(IdxConstraint) * nColl + 1); + if( pNew ){ + pNew->zColl = (char*)&pNew[1]; + memcpy(pNew->zColl, zColl, nColl+1); + } + return pNew; +} + +/* +** An error associated with database handle db has just occurred. Pass +** the error message to callback function xOut. +*/ +static void idxDatabaseError( + sqlite3 *db, /* Database handle */ + char **pzErrmsg /* Write error here */ +){ + *pzErrmsg = sqlite3_mprintf("%s", sqlite3_errmsg(db)); +} + +/* +** Prepare an SQL statement. +*/ +static int idxPrepareStmt( + sqlite3 *db, /* Database handle to compile against */ + sqlite3_stmt **ppStmt, /* OUT: Compiled SQL statement */ + char **pzErrmsg, /* OUT: sqlite3_malloc()ed error message */ + const char *zSql /* SQL statement to compile */ +){ + int rc = sqlite3_prepare_v2(db, zSql, -1, ppStmt, 0); + if( rc!=SQLITE_OK ){ + *ppStmt = 0; + idxDatabaseError(db, pzErrmsg); + } + return rc; +} + +/* +** Prepare an SQL statement using the results of a printf() formatting. +*/ +static int idxPrintfPrepareStmt( + sqlite3 *db, /* Database handle to compile against */ + sqlite3_stmt **ppStmt, /* OUT: Compiled SQL statement */ + char **pzErrmsg, /* OUT: sqlite3_malloc()ed error message */ + const char *zFmt, /* printf() format of SQL statement */ + ... /* Trailing printf() arguments */ +){ + va_list ap; + int rc; + char *zSql; + va_start(ap, zFmt); + zSql = sqlite3_vmprintf(zFmt, ap); + if( zSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = idxPrepareStmt(db, ppStmt, pzErrmsg, zSql); + sqlite3_free(zSql); + } + va_end(ap); + return rc; +} + + +/************************************************************************* +** Beginning of virtual table implementation. +*/ +typedef struct ExpertVtab ExpertVtab; +struct ExpertVtab { + sqlite3_vtab base; + IdxTable *pTab; + sqlite3expert *pExpert; +}; + +typedef struct ExpertCsr ExpertCsr; +struct ExpertCsr { + sqlite3_vtab_cursor base; + sqlite3_stmt *pData; +}; + +static char *expertDequote(const char *zIn){ + int n = STRLEN(zIn); + char *zRet = sqlite3_malloc(n); + + assert( zIn[0]=='\'' ); + assert( zIn[n-1]=='\'' ); + + if( zRet ){ + int iOut = 0; + int iIn = 0; + for(iIn=1; iIn<(n-1); iIn++){ + if( zIn[iIn]=='\'' ){ + assert( zIn[iIn+1]=='\'' ); + iIn++; + } + zRet[iOut++] = zIn[iIn]; + } + zRet[iOut] = '\0'; + } + + return zRet; +} + +/* +** This function is the implementation of both the xConnect and xCreate +** methods of the r-tree virtual table. +** +** argv[0] -> module name +** argv[1] -> database name +** argv[2] -> table name +** argv[...] -> column names... +*/ +static int expertConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + sqlite3expert *pExpert = (sqlite3expert*)pAux; + ExpertVtab *p = 0; + int rc; + + if( argc!=4 ){ + *pzErr = sqlite3_mprintf("internal error!"); + rc = SQLITE_ERROR; + }else{ + char *zCreateTable = expertDequote(argv[3]); + if( zCreateTable ){ + rc = sqlite3_declare_vtab(db, zCreateTable); + if( rc==SQLITE_OK ){ + p = idxMalloc(&rc, sizeof(ExpertVtab)); + } + if( rc==SQLITE_OK ){ + p->pExpert = pExpert; + p->pTab = pExpert->pTable; + assert( sqlite3_stricmp(p->pTab->zName, argv[2])==0 ); + } + sqlite3_free(zCreateTable); + }else{ + rc = SQLITE_NOMEM; + } + } + + *ppVtab = (sqlite3_vtab*)p; + return rc; +} + +static int expertDisconnect(sqlite3_vtab *pVtab){ + ExpertVtab *p = (ExpertVtab*)pVtab; + sqlite3_free(p); + return SQLITE_OK; +} + +static int expertBestIndex(sqlite3_vtab *pVtab, sqlite3_index_info *pIdxInfo){ + ExpertVtab *p = (ExpertVtab*)pVtab; + int rc = SQLITE_OK; + int n = 0; + IdxScan *pScan; + const int opmask = + SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_GT | + SQLITE_INDEX_CONSTRAINT_LT | SQLITE_INDEX_CONSTRAINT_GE | + SQLITE_INDEX_CONSTRAINT_LE; + + pScan = idxMalloc(&rc, sizeof(IdxScan)); + if( pScan ){ + int i; + + /* Link the new scan object into the list */ + pScan->pTab = p->pTab; + pScan->pNextScan = p->pExpert->pScan; + p->pExpert->pScan = pScan; + + /* Add the constraints to the IdxScan object */ + for(i=0; inConstraint; i++){ + struct sqlite3_index_constraint *pCons = &pIdxInfo->aConstraint[i]; + if( pCons->usable + && pCons->iColumn>=0 + && p->pTab->aCol[pCons->iColumn].iPk==0 + && (pCons->op & opmask) + ){ + IdxConstraint *pNew; + const char *zColl = sqlite3_vtab_collation(pIdxInfo, i); + pNew = idxNewConstraint(&rc, zColl); + if( pNew ){ + pNew->iCol = pCons->iColumn; + if( pCons->op==SQLITE_INDEX_CONSTRAINT_EQ ){ + pNew->pNext = pScan->pEq; + pScan->pEq = pNew; + }else{ + pNew->bRange = 1; + pNew->pNext = pScan->pRange; + pScan->pRange = pNew; + } + } + n++; + pIdxInfo->aConstraintUsage[i].argvIndex = n; + } + } + + /* Add the ORDER BY to the IdxScan object */ + for(i=pIdxInfo->nOrderBy-1; i>=0; i--){ + int iCol = pIdxInfo->aOrderBy[i].iColumn; + if( iCol>=0 ){ + IdxConstraint *pNew = idxNewConstraint(&rc, p->pTab->aCol[iCol].zColl); + if( pNew ){ + pNew->iCol = iCol; + pNew->bDesc = pIdxInfo->aOrderBy[i].desc; + pNew->pNext = pScan->pOrder; + pNew->pLink = pScan->pOrder; + pScan->pOrder = pNew; + n++; + } + } + } + } + + pIdxInfo->estimatedCost = 1000000.0 / (n+1); + return rc; +} + +static int expertUpdate( + sqlite3_vtab *pVtab, + int nData, + sqlite3_value **azData, + sqlite_int64 *pRowid +){ + (void)pVtab; + (void)nData; + (void)azData; + (void)pRowid; + return SQLITE_OK; +} + +/* +** Virtual table module xOpen method. +*/ +static int expertOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){ + int rc = SQLITE_OK; + ExpertCsr *pCsr; + (void)pVTab; + pCsr = idxMalloc(&rc, sizeof(ExpertCsr)); + *ppCursor = (sqlite3_vtab_cursor*)pCsr; + return rc; +} + +/* +** Virtual table module xClose method. +*/ +static int expertClose(sqlite3_vtab_cursor *cur){ + ExpertCsr *pCsr = (ExpertCsr*)cur; + sqlite3_finalize(pCsr->pData); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** Virtual table module xEof method. +** +** Return non-zero if the cursor does not currently point to a valid +** record (i.e if the scan has finished), or zero otherwise. +*/ +static int expertEof(sqlite3_vtab_cursor *cur){ + ExpertCsr *pCsr = (ExpertCsr*)cur; + return pCsr->pData==0; +} + +/* +** Virtual table module xNext method. +*/ +static int expertNext(sqlite3_vtab_cursor *cur){ + ExpertCsr *pCsr = (ExpertCsr*)cur; + int rc = SQLITE_OK; + + assert( pCsr->pData ); + rc = sqlite3_step(pCsr->pData); + if( rc!=SQLITE_ROW ){ + rc = sqlite3_finalize(pCsr->pData); + pCsr->pData = 0; + }else{ + rc = SQLITE_OK; + } + + return rc; +} + +/* +** Virtual table module xRowid method. +*/ +static int expertRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ + (void)cur; + *pRowid = 0; + return SQLITE_OK; +} + +/* +** Virtual table module xColumn method. +*/ +static int expertColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ + ExpertCsr *pCsr = (ExpertCsr*)cur; + sqlite3_value *pVal; + pVal = sqlite3_column_value(pCsr->pData, i); + if( pVal ){ + sqlite3_result_value(ctx, pVal); + } + return SQLITE_OK; +} + +/* +** Virtual table module xFilter method. +*/ +static int expertFilter( + sqlite3_vtab_cursor *cur, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + ExpertCsr *pCsr = (ExpertCsr*)cur; + ExpertVtab *pVtab = (ExpertVtab*)(cur->pVtab); + sqlite3expert *pExpert = pVtab->pExpert; + int rc; + + (void)idxNum; + (void)idxStr; + (void)argc; + (void)argv; + rc = sqlite3_finalize(pCsr->pData); + pCsr->pData = 0; + if( rc==SQLITE_OK ){ + rc = idxPrintfPrepareStmt(pExpert->db, &pCsr->pData, &pVtab->base.zErrMsg, + "SELECT * FROM main.%Q WHERE sample()", pVtab->pTab->zName + ); + } + + if( rc==SQLITE_OK ){ + rc = expertNext(cur); + } + return rc; +} + +static int idxRegisterVtab(sqlite3expert *p){ + static sqlite3_module expertModule = { + 2, /* iVersion */ + expertConnect, /* xCreate - create a table */ + expertConnect, /* xConnect - connect to an existing table */ + expertBestIndex, /* xBestIndex - Determine search strategy */ + expertDisconnect, /* xDisconnect - Disconnect from a table */ + expertDisconnect, /* xDestroy - Drop a table */ + expertOpen, /* xOpen - open a cursor */ + expertClose, /* xClose - close a cursor */ + expertFilter, /* xFilter - configure scan constraints */ + expertNext, /* xNext - advance a cursor */ + expertEof, /* xEof */ + expertColumn, /* xColumn - read data */ + expertRowid, /* xRowid - read data */ + expertUpdate, /* xUpdate - write data */ + 0, /* xBegin - begin transaction */ + 0, /* xSync - sync transaction */ + 0, /* xCommit - commit transaction */ + 0, /* xRollback - rollback transaction */ + 0, /* xFindFunction - function overloading */ + 0, /* xRename - rename the table */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ + 0, /* xShadowName */ + }; + + return sqlite3_create_module(p->dbv, "expert", &expertModule, (void*)p); +} +/* +** End of virtual table implementation. +*************************************************************************/ +/* +** Finalize SQL statement pStmt. If (*pRc) is SQLITE_OK when this function +** is called, set it to the return value of sqlite3_finalize() before +** returning. Otherwise, discard the sqlite3_finalize() return value. +*/ +static void idxFinalize(int *pRc, sqlite3_stmt *pStmt){ + int rc = sqlite3_finalize(pStmt); + if( *pRc==SQLITE_OK ) *pRc = rc; +} + +/* +** Attempt to allocate an IdxTable structure corresponding to table zTab +** in the main database of connection db. If successful, set (*ppOut) to +** point to the new object and return SQLITE_OK. Otherwise, return an +** SQLite error code and set (*ppOut) to NULL. In this case *pzErrmsg may be +** set to point to an error string. +** +** It is the responsibility of the caller to eventually free either the +** IdxTable object or error message using sqlite3_free(). +*/ +static int idxGetTableInfo( + sqlite3 *db, /* Database connection to read details from */ + const char *zTab, /* Table name */ + IdxTable **ppOut, /* OUT: New object (if successful) */ + char **pzErrmsg /* OUT: Error message (if not) */ +){ + sqlite3_stmt *p1 = 0; + int nCol = 0; + int nTab = STRLEN(zTab); + int nByte = sizeof(IdxTable) + nTab + 1; + IdxTable *pNew = 0; + int rc, rc2; + char *pCsr = 0; + + rc = idxPrintfPrepareStmt(db, &p1, pzErrmsg, "PRAGMA table_info=%Q", zTab); + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(p1) ){ + const char *zCol = (const char*)sqlite3_column_text(p1, 1); + nByte += 1 + STRLEN(zCol); + rc = sqlite3_table_column_metadata( + db, "main", zTab, zCol, 0, &zCol, 0, 0, 0 + ); + nByte += 1 + STRLEN(zCol); + nCol++; + } + rc2 = sqlite3_reset(p1); + if( rc==SQLITE_OK ) rc = rc2; + + nByte += sizeof(IdxColumn) * nCol; + if( rc==SQLITE_OK ){ + pNew = idxMalloc(&rc, nByte); + } + if( rc==SQLITE_OK ){ + pNew->aCol = (IdxColumn*)&pNew[1]; + pNew->nCol = nCol; + pCsr = (char*)&pNew->aCol[nCol]; + } + + nCol = 0; + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(p1) ){ + const char *zCol = (const char*)sqlite3_column_text(p1, 1); + int nCopy = STRLEN(zCol) + 1; + pNew->aCol[nCol].zName = pCsr; + pNew->aCol[nCol].iPk = sqlite3_column_int(p1, 5); + memcpy(pCsr, zCol, nCopy); + pCsr += nCopy; + + rc = sqlite3_table_column_metadata( + db, "main", zTab, zCol, 0, &zCol, 0, 0, 0 + ); + if( rc==SQLITE_OK ){ + nCopy = STRLEN(zCol) + 1; + pNew->aCol[nCol].zColl = pCsr; + memcpy(pCsr, zCol, nCopy); + pCsr += nCopy; + } + + nCol++; + } + idxFinalize(&rc, p1); + + if( rc!=SQLITE_OK ){ + sqlite3_free(pNew); + pNew = 0; + }else{ + pNew->zName = pCsr; + memcpy(pNew->zName, zTab, nTab+1); + } + + *ppOut = pNew; + return rc; +} + +/* +** This function is a no-op if *pRc is set to anything other than +** SQLITE_OK when it is called. +** +** If *pRc is initially set to SQLITE_OK, then the text specified by +** the printf() style arguments is appended to zIn and the result returned +** in a buffer allocated by sqlite3_malloc(). sqlite3_free() is called on +** zIn before returning. +*/ +static char *idxAppendText(int *pRc, char *zIn, const char *zFmt, ...){ + va_list ap; + char *zAppend = 0; + char *zRet = 0; + int nIn = zIn ? STRLEN(zIn) : 0; + int nAppend = 0; + va_start(ap, zFmt); + if( *pRc==SQLITE_OK ){ + zAppend = sqlite3_vmprintf(zFmt, ap); + if( zAppend ){ + nAppend = STRLEN(zAppend); + zRet = (char*)sqlite3_malloc(nIn + nAppend + 1); + } + if( zAppend && zRet ){ + if( nIn ) memcpy(zRet, zIn, nIn); + memcpy(&zRet[nIn], zAppend, nAppend+1); + }else{ + sqlite3_free(zRet); + zRet = 0; + *pRc = SQLITE_NOMEM; + } + sqlite3_free(zAppend); + sqlite3_free(zIn); + } + va_end(ap); + return zRet; +} + +/* +** Return true if zId must be quoted in order to use it as an SQL +** identifier, or false otherwise. +*/ +static int idxIdentifierRequiresQuotes(const char *zId){ + int i; + for(i=0; zId[i]; i++){ + if( !(zId[i]=='_') + && !(zId[i]>='0' && zId[i]<='9') + && !(zId[i]>='a' && zId[i]<='z') + && !(zId[i]>='A' && zId[i]<='Z') + ){ + return 1; + } + } + return 0; +} + +/* +** This function appends an index column definition suitable for constraint +** pCons to the string passed as zIn and returns the result. +*/ +static char *idxAppendColDefn( + int *pRc, /* IN/OUT: Error code */ + char *zIn, /* Column defn accumulated so far */ + IdxTable *pTab, /* Table index will be created on */ + IdxConstraint *pCons +){ + char *zRet = zIn; + IdxColumn *p = &pTab->aCol[pCons->iCol]; + if( zRet ) zRet = idxAppendText(pRc, zRet, ", "); + + if( idxIdentifierRequiresQuotes(p->zName) ){ + zRet = idxAppendText(pRc, zRet, "%Q", p->zName); + }else{ + zRet = idxAppendText(pRc, zRet, "%s", p->zName); + } + + if( sqlite3_stricmp(p->zColl, pCons->zColl) ){ + if( idxIdentifierRequiresQuotes(pCons->zColl) ){ + zRet = idxAppendText(pRc, zRet, " COLLATE %Q", pCons->zColl); + }else{ + zRet = idxAppendText(pRc, zRet, " COLLATE %s", pCons->zColl); + } + } + + if( pCons->bDesc ){ + zRet = idxAppendText(pRc, zRet, " DESC"); + } + return zRet; +} + +/* +** Search database dbm for an index compatible with the one idxCreateFromCons() +** would create from arguments pScan, pEq and pTail. If no error occurs and +** such an index is found, return non-zero. Or, if no such index is found, +** return zero. +** +** If an error occurs, set *pRc to an SQLite error code and return zero. +*/ +static int idxFindCompatible( + int *pRc, /* OUT: Error code */ + sqlite3* dbm, /* Database to search */ + IdxScan *pScan, /* Scan for table to search for index on */ + IdxConstraint *pEq, /* List of == constraints */ + IdxConstraint *pTail /* List of range constraints */ +){ + const char *zTbl = pScan->pTab->zName; + sqlite3_stmt *pIdxList = 0; + IdxConstraint *pIter; + int nEq = 0; /* Number of elements in pEq */ + int rc; + + /* Count the elements in list pEq */ + for(pIter=pEq; pIter; pIter=pIter->pLink) nEq++; + + rc = idxPrintfPrepareStmt(dbm, &pIdxList, 0, "PRAGMA index_list=%Q", zTbl); + while( rc==SQLITE_OK && sqlite3_step(pIdxList)==SQLITE_ROW ){ + int bMatch = 1; + IdxConstraint *pT = pTail; + sqlite3_stmt *pInfo = 0; + const char *zIdx = (const char*)sqlite3_column_text(pIdxList, 1); + + /* Zero the IdxConstraint.bFlag values in the pEq list */ + for(pIter=pEq; pIter; pIter=pIter->pLink) pIter->bFlag = 0; + + rc = idxPrintfPrepareStmt(dbm, &pInfo, 0, "PRAGMA index_xInfo=%Q", zIdx); + while( rc==SQLITE_OK && sqlite3_step(pInfo)==SQLITE_ROW ){ + int iIdx = sqlite3_column_int(pInfo, 0); + int iCol = sqlite3_column_int(pInfo, 1); + const char *zColl = (const char*)sqlite3_column_text(pInfo, 4); + + if( iIdxpLink){ + if( pIter->bFlag ) continue; + if( pIter->iCol!=iCol ) continue; + if( sqlite3_stricmp(pIter->zColl, zColl) ) continue; + pIter->bFlag = 1; + break; + } + if( pIter==0 ){ + bMatch = 0; + break; + } + }else{ + if( pT ){ + if( pT->iCol!=iCol || sqlite3_stricmp(pT->zColl, zColl) ){ + bMatch = 0; + break; + } + pT = pT->pLink; + } + } + } + idxFinalize(&rc, pInfo); + + if( rc==SQLITE_OK && bMatch ){ + sqlite3_finalize(pIdxList); + return 1; + } + } + idxFinalize(&rc, pIdxList); + + *pRc = rc; + return 0; +} + +static int idxCreateFromCons( + sqlite3expert *p, + IdxScan *pScan, + IdxConstraint *pEq, + IdxConstraint *pTail +){ + sqlite3 *dbm = p->dbm; + int rc = SQLITE_OK; + if( (pEq || pTail) && 0==idxFindCompatible(&rc, dbm, pScan, pEq, pTail) ){ + IdxTable *pTab = pScan->pTab; + char *zCols = 0; + char *zIdx = 0; + IdxConstraint *pCons; + unsigned int h = 0; + const char *zFmt; + + for(pCons=pEq; pCons; pCons=pCons->pLink){ + zCols = idxAppendColDefn(&rc, zCols, pTab, pCons); + } + for(pCons=pTail; pCons; pCons=pCons->pLink){ + zCols = idxAppendColDefn(&rc, zCols, pTab, pCons); + } + + if( rc==SQLITE_OK ){ + /* Hash the list of columns to come up with a name for the index */ + const char *zTable = pScan->pTab->zName; + char *zName; /* Index name */ + int i; + for(i=0; zCols[i]; i++){ + h += ((h<<3) + zCols[i]); + } + zName = sqlite3_mprintf("%s_idx_%08x", zTable, h); + if( zName==0 ){ + rc = SQLITE_NOMEM; + }else{ + if( idxIdentifierRequiresQuotes(zTable) ){ + zFmt = "CREATE INDEX '%q' ON %Q(%s)"; + }else{ + zFmt = "CREATE INDEX %s ON %s(%s)"; + } + zIdx = sqlite3_mprintf(zFmt, zName, zTable, zCols); + if( !zIdx ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_exec(dbm, zIdx, 0, 0, p->pzErrmsg); + idxHashAdd(&rc, &p->hIdx, zName, zIdx); + } + sqlite3_free(zName); + sqlite3_free(zIdx); + } + } + + sqlite3_free(zCols); + } + return rc; +} + +/* +** Return true if list pList (linked by IdxConstraint.pLink) contains +** a constraint compatible with *p. Otherwise return false. +*/ +static int idxFindConstraint(IdxConstraint *pList, IdxConstraint *p){ + IdxConstraint *pCmp; + for(pCmp=pList; pCmp; pCmp=pCmp->pLink){ + if( p->iCol==pCmp->iCol ) return 1; + } + return 0; +} + +static int idxCreateFromWhere( + sqlite3expert *p, + IdxScan *pScan, /* Create indexes for this scan */ + IdxConstraint *pTail /* range/ORDER BY constraints for inclusion */ +){ + IdxConstraint *p1 = 0; + IdxConstraint *pCon; + int rc; + + /* Gather up all the == constraints. */ + for(pCon=pScan->pEq; pCon; pCon=pCon->pNext){ + if( !idxFindConstraint(p1, pCon) && !idxFindConstraint(pTail, pCon) ){ + pCon->pLink = p1; + p1 = pCon; + } + } + + /* Create an index using the == constraints collected above. And the + ** range constraint/ORDER BY terms passed in by the caller, if any. */ + rc = idxCreateFromCons(p, pScan, p1, pTail); + + /* If no range/ORDER BY passed by the caller, create a version of the + ** index for each range constraint. */ + if( pTail==0 ){ + for(pCon=pScan->pRange; rc==SQLITE_OK && pCon; pCon=pCon->pNext){ + assert( pCon->pLink==0 ); + if( !idxFindConstraint(p1, pCon) && !idxFindConstraint(pTail, pCon) ){ + rc = idxCreateFromCons(p, pScan, p1, pCon); + } + } + } + + return rc; +} + +/* +** Create candidate indexes in database [dbm] based on the data in +** linked-list pScan. +*/ +static int idxCreateCandidates(sqlite3expert *p){ + int rc = SQLITE_OK; + IdxScan *pIter; + + for(pIter=p->pScan; pIter && rc==SQLITE_OK; pIter=pIter->pNextScan){ + rc = idxCreateFromWhere(p, pIter, 0); + if( rc==SQLITE_OK && pIter->pOrder ){ + rc = idxCreateFromWhere(p, pIter, pIter->pOrder); + } + } + + return rc; +} + +/* +** Free all elements of the linked list starting at pConstraint. +*/ +static void idxConstraintFree(IdxConstraint *pConstraint){ + IdxConstraint *pNext; + IdxConstraint *p; + + for(p=pConstraint; p; p=pNext){ + pNext = p->pNext; + sqlite3_free(p); + } +} + +/* +** Free all elements of the linked list starting from pScan up until pLast +** (pLast is not freed). +*/ +static void idxScanFree(IdxScan *pScan, IdxScan *pLast){ + IdxScan *p; + IdxScan *pNext; + for(p=pScan; p!=pLast; p=pNext){ + pNext = p->pNextScan; + idxConstraintFree(p->pOrder); + idxConstraintFree(p->pEq); + idxConstraintFree(p->pRange); + sqlite3_free(p); + } +} + +/* +** Free all elements of the linked list starting from pStatement up +** until pLast (pLast is not freed). +*/ +static void idxStatementFree(IdxStatement *pStatement, IdxStatement *pLast){ + IdxStatement *p; + IdxStatement *pNext; + for(p=pStatement; p!=pLast; p=pNext){ + pNext = p->pNext; + sqlite3_free(p->zEQP); + sqlite3_free(p->zIdx); + sqlite3_free(p); + } +} + +/* +** Free the linked list of IdxTable objects starting at pTab. +*/ +static void idxTableFree(IdxTable *pTab){ + IdxTable *pIter; + IdxTable *pNext; + for(pIter=pTab; pIter; pIter=pNext){ + pNext = pIter->pNext; + sqlite3_free(pIter); + } +} + +/* +** Free the linked list of IdxWrite objects starting at pTab. +*/ +static void idxWriteFree(IdxWrite *pTab){ + IdxWrite *pIter; + IdxWrite *pNext; + for(pIter=pTab; pIter; pIter=pNext){ + pNext = pIter->pNext; + sqlite3_free(pIter); + } +} + + + +/* +** This function is called after candidate indexes have been created. It +** runs all the queries to see which indexes they prefer, and populates +** IdxStatement.zIdx and IdxStatement.zEQP with the results. +*/ +int idxFindIndexes( + sqlite3expert *p, + char **pzErr /* OUT: Error message (sqlite3_malloc) */ +){ + IdxStatement *pStmt; + sqlite3 *dbm = p->dbm; + int rc = SQLITE_OK; + + IdxHash hIdx; + idxHashInit(&hIdx); + + for(pStmt=p->pStatement; rc==SQLITE_OK && pStmt; pStmt=pStmt->pNext){ + IdxHashEntry *pEntry; + sqlite3_stmt *pExplain = 0; + idxHashClear(&hIdx); + rc = idxPrintfPrepareStmt(dbm, &pExplain, pzErr, + "EXPLAIN QUERY PLAN %s", pStmt->zSql + ); + while( rc==SQLITE_OK && sqlite3_step(pExplain)==SQLITE_ROW ){ + /* int iId = sqlite3_column_int(pExplain, 0); */ + /* int iParent = sqlite3_column_int(pExplain, 1); */ + /* int iNotUsed = sqlite3_column_int(pExplain, 2); */ + const char *zDetail = (const char*)sqlite3_column_text(pExplain, 3); + int nDetail = STRLEN(zDetail); + int i; + + for(i=0; ihIdx, zIdx, nIdx); + if( zSql ){ + idxHashAdd(&rc, &hIdx, zSql, 0); + if( rc ) goto find_indexes_out; + } + break; + } + } + + if( zDetail[0]!='-' ){ + pStmt->zEQP = idxAppendText(&rc, pStmt->zEQP, "%s\n", zDetail); + } + } + + for(pEntry=hIdx.pFirst; pEntry; pEntry=pEntry->pNext){ + pStmt->zIdx = idxAppendText(&rc, pStmt->zIdx, "%s;\n", pEntry->zKey); + } + + idxFinalize(&rc, pExplain); + } + + find_indexes_out: + idxHashClear(&hIdx); + return rc; +} + +static int idxAuthCallback( + void *pCtx, + int eOp, + const char *z3, + const char *z4, + const char *zDb, + const char *zTrigger +){ + int rc = SQLITE_OK; + (void)z4; + (void)zTrigger; + if( eOp==SQLITE_INSERT || eOp==SQLITE_UPDATE || eOp==SQLITE_DELETE ){ + if( sqlite3_stricmp(zDb, "main")==0 ){ + sqlite3expert *p = (sqlite3expert*)pCtx; + IdxTable *pTab; + for(pTab=p->pTable; pTab; pTab=pTab->pNext){ + if( 0==sqlite3_stricmp(z3, pTab->zName) ) break; + } + if( pTab ){ + IdxWrite *pWrite; + for(pWrite=p->pWrite; pWrite; pWrite=pWrite->pNext){ + if( pWrite->pTab==pTab && pWrite->eOp==eOp ) break; + } + if( pWrite==0 ){ + pWrite = idxMalloc(&rc, sizeof(IdxWrite)); + if( rc==SQLITE_OK ){ + pWrite->pTab = pTab; + pWrite->eOp = eOp; + pWrite->pNext = p->pWrite; + p->pWrite = pWrite; + } + } + } + } + } + return rc; +} + +static int idxProcessOneTrigger( + sqlite3expert *p, + IdxWrite *pWrite, + char **pzErr +){ + static const char *zInt = UNIQUE_TABLE_NAME; + static const char *zDrop = "DROP TABLE " UNIQUE_TABLE_NAME; + IdxTable *pTab = pWrite->pTab; + const char *zTab = pTab->zName; + const char *zSql = + "SELECT 'CREATE TEMP' || substr(sql, 7) FROM sqlite_master " + "WHERE tbl_name = %Q AND type IN ('table', 'trigger') " + "ORDER BY type;"; + sqlite3_stmt *pSelect = 0; + int rc = SQLITE_OK; + char *zWrite = 0; + + /* Create the table and its triggers in the temp schema */ + rc = idxPrintfPrepareStmt(p->db, &pSelect, pzErr, zSql, zTab, zTab); + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pSelect) ){ + const char *zCreate = (const char*)sqlite3_column_text(pSelect, 0); + rc = sqlite3_exec(p->dbv, zCreate, 0, 0, pzErr); + } + idxFinalize(&rc, pSelect); + + /* Rename the table in the temp schema to zInt */ + if( rc==SQLITE_OK ){ + char *z = sqlite3_mprintf("ALTER TABLE temp.%Q RENAME TO %Q", zTab, zInt); + if( z==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_exec(p->dbv, z, 0, 0, pzErr); + sqlite3_free(z); + } + } + + switch( pWrite->eOp ){ + case SQLITE_INSERT: { + int i; + zWrite = idxAppendText(&rc, zWrite, "INSERT INTO %Q VALUES(", zInt); + for(i=0; inCol; i++){ + zWrite = idxAppendText(&rc, zWrite, "%s?", i==0 ? "" : ", "); + } + zWrite = idxAppendText(&rc, zWrite, ")"); + break; + } + case SQLITE_UPDATE: { + int i; + zWrite = idxAppendText(&rc, zWrite, "UPDATE %Q SET ", zInt); + for(i=0; inCol; i++){ + zWrite = idxAppendText(&rc, zWrite, "%s%Q=?", i==0 ? "" : ", ", + pTab->aCol[i].zName + ); + } + break; + } + default: { + assert( pWrite->eOp==SQLITE_DELETE ); + if( rc==SQLITE_OK ){ + zWrite = sqlite3_mprintf("DELETE FROM %Q", zInt); + if( zWrite==0 ) rc = SQLITE_NOMEM; + } + } + } + + if( rc==SQLITE_OK ){ + sqlite3_stmt *pX = 0; + rc = sqlite3_prepare_v2(p->dbv, zWrite, -1, &pX, 0); + idxFinalize(&rc, pX); + if( rc!=SQLITE_OK ){ + idxDatabaseError(p->dbv, pzErr); + } + } + sqlite3_free(zWrite); + + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(p->dbv, zDrop, 0, 0, pzErr); + } + + return rc; +} + +static int idxProcessTriggers(sqlite3expert *p, char **pzErr){ + int rc = SQLITE_OK; + IdxWrite *pEnd = 0; + IdxWrite *pFirst = p->pWrite; + + while( rc==SQLITE_OK && pFirst!=pEnd ){ + IdxWrite *pIter; + for(pIter=pFirst; rc==SQLITE_OK && pIter!=pEnd; pIter=pIter->pNext){ + rc = idxProcessOneTrigger(p, pIter, pzErr); + } + pEnd = pFirst; + pFirst = p->pWrite; + } + + return rc; +} + + +static int idxCreateVtabSchema(sqlite3expert *p, char **pzErrmsg){ + int rc = idxRegisterVtab(p); + sqlite3_stmt *pSchema = 0; + + /* For each table in the main db schema: + ** + ** 1) Add an entry to the p->pTable list, and + ** 2) Create the equivalent virtual table in dbv. + */ + rc = idxPrepareStmt(p->db, &pSchema, pzErrmsg, + "SELECT type, name, sql, 1 FROM sqlite_master " + "WHERE type IN ('table','view') AND name NOT LIKE 'sqlite_%%' " + " UNION ALL " + "SELECT type, name, sql, 2 FROM sqlite_master " + "WHERE type = 'trigger'" + " AND tbl_name IN(SELECT name FROM sqlite_master WHERE type = 'view') " + "ORDER BY 4, 1" + ); + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pSchema) ){ + const char *zType = (const char*)sqlite3_column_text(pSchema, 0); + const char *zName = (const char*)sqlite3_column_text(pSchema, 1); + const char *zSql = (const char*)sqlite3_column_text(pSchema, 2); + + if( zType[0]=='v' || zType[1]=='r' ){ + rc = sqlite3_exec(p->dbv, zSql, 0, 0, pzErrmsg); + }else{ + IdxTable *pTab; + rc = idxGetTableInfo(p->db, zName, &pTab, pzErrmsg); + if( rc==SQLITE_OK ){ + int i; + char *zInner = 0; + char *zOuter = 0; + pTab->pNext = p->pTable; + p->pTable = pTab; + + /* The statement the vtab will pass to sqlite3_declare_vtab() */ + zInner = idxAppendText(&rc, 0, "CREATE TABLE x("); + for(i=0; inCol; i++){ + zInner = idxAppendText(&rc, zInner, "%s%Q COLLATE %s", + (i==0 ? "" : ", "), pTab->aCol[i].zName, pTab->aCol[i].zColl + ); + } + zInner = idxAppendText(&rc, zInner, ")"); + + /* The CVT statement to create the vtab */ + zOuter = idxAppendText(&rc, 0, + "CREATE VIRTUAL TABLE %Q USING expert(%Q)", zName, zInner + ); + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(p->dbv, zOuter, 0, 0, pzErrmsg); + } + sqlite3_free(zInner); + sqlite3_free(zOuter); + } + } + } + idxFinalize(&rc, pSchema); + return rc; +} + +struct IdxSampleCtx { + int iTarget; + double target; /* Target nRet/nRow value */ + double nRow; /* Number of rows seen */ + double nRet; /* Number of rows returned */ +}; + +static void idxSampleFunc( + sqlite3_context *pCtx, + int argc, + sqlite3_value **argv +){ + struct IdxSampleCtx *p = (struct IdxSampleCtx*)sqlite3_user_data(pCtx); + int bRet; + + (void)argv; + assert( argc==0 ); + if( p->nRow==0.0 ){ + bRet = 1; + }else{ + bRet = (p->nRet / p->nRow) <= p->target; + if( bRet==0 ){ + unsigned short rnd; + sqlite3_randomness(2, (void*)&rnd); + bRet = ((int)rnd % 100) <= p->iTarget; + } + } + + sqlite3_result_int(pCtx, bRet); + p->nRow += 1.0; + p->nRet += (double)bRet; +} + +struct IdxRemCtx { + int nSlot; + struct IdxRemSlot { + int eType; /* SQLITE_NULL, INTEGER, REAL, TEXT, BLOB */ + i64 iVal; /* SQLITE_INTEGER value */ + double rVal; /* SQLITE_FLOAT value */ + int nByte; /* Bytes of space allocated at z */ + int n; /* Size of buffer z */ + char *z; /* SQLITE_TEXT/BLOB value */ + } aSlot[1]; +}; + +/* +** Implementation of scalar function rem(). +*/ +static void idxRemFunc( + sqlite3_context *pCtx, + int argc, + sqlite3_value **argv +){ + struct IdxRemCtx *p = (struct IdxRemCtx*)sqlite3_user_data(pCtx); + struct IdxRemSlot *pSlot; + int iSlot; + assert( argc==2 ); + + iSlot = sqlite3_value_int(argv[0]); + assert( iSlot<=p->nSlot ); + pSlot = &p->aSlot[iSlot]; + + switch( pSlot->eType ){ + case SQLITE_NULL: + /* no-op */ + break; + + case SQLITE_INTEGER: + sqlite3_result_int64(pCtx, pSlot->iVal); + break; + + case SQLITE_FLOAT: + sqlite3_result_double(pCtx, pSlot->rVal); + break; + + case SQLITE_BLOB: + sqlite3_result_blob(pCtx, pSlot->z, pSlot->n, SQLITE_TRANSIENT); + break; + + case SQLITE_TEXT: + sqlite3_result_text(pCtx, pSlot->z, pSlot->n, SQLITE_TRANSIENT); + break; + } + + pSlot->eType = sqlite3_value_type(argv[1]); + switch( pSlot->eType ){ + case SQLITE_NULL: + /* no-op */ + break; + + case SQLITE_INTEGER: + pSlot->iVal = sqlite3_value_int64(argv[1]); + break; + + case SQLITE_FLOAT: + pSlot->rVal = sqlite3_value_double(argv[1]); + break; + + case SQLITE_BLOB: + case SQLITE_TEXT: { + int nByte = sqlite3_value_bytes(argv[1]); + if( nByte>pSlot->nByte ){ + char *zNew = (char*)sqlite3_realloc(pSlot->z, nByte*2); + if( zNew==0 ){ + sqlite3_result_error_nomem(pCtx); + return; + } + pSlot->nByte = nByte*2; + pSlot->z = zNew; + } + pSlot->n = nByte; + if( pSlot->eType==SQLITE_BLOB ){ + memcpy(pSlot->z, sqlite3_value_blob(argv[1]), nByte); + }else{ + memcpy(pSlot->z, sqlite3_value_text(argv[1]), nByte); + } + break; + } + } +} + +static int idxLargestIndex(sqlite3 *db, int *pnMax, char **pzErr){ + int rc = SQLITE_OK; + const char *zMax = + "SELECT max(i.seqno) FROM " + " sqlite_master AS s, " + " pragma_index_list(s.name) AS l, " + " pragma_index_info(l.name) AS i " + "WHERE s.type = 'table'"; + sqlite3_stmt *pMax = 0; + + *pnMax = 0; + rc = idxPrepareStmt(db, &pMax, pzErr, zMax); + if( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pMax) ){ + *pnMax = sqlite3_column_int(pMax, 0) + 1; + } + idxFinalize(&rc, pMax); + + return rc; +} + +static int idxPopulateOneStat1( + sqlite3expert *p, + sqlite3_stmt *pIndexXInfo, + sqlite3_stmt *pWriteStat, + const char *zTab, + const char *zIdx, + char **pzErr +){ + char *zCols = 0; + char *zOrder = 0; + char *zQuery = 0; + int nCol = 0; + int i; + sqlite3_stmt *pQuery = 0; + int *aStat = 0; + int rc = SQLITE_OK; + + assert( p->iSample>0 ); + + /* Formulate the query text */ + sqlite3_bind_text(pIndexXInfo, 1, zIdx, -1, SQLITE_STATIC); + while( SQLITE_OK==rc && SQLITE_ROW==sqlite3_step(pIndexXInfo) ){ + const char *zComma = zCols==0 ? "" : ", "; + const char *zName = (const char*)sqlite3_column_text(pIndexXInfo, 0); + const char *zColl = (const char*)sqlite3_column_text(pIndexXInfo, 1); + zCols = idxAppendText(&rc, zCols, + "%sx.%Q IS rem(%d, x.%Q) COLLATE %s", zComma, zName, nCol, zName, zColl + ); + zOrder = idxAppendText(&rc, zOrder, "%s%d", zComma, ++nCol); + } + sqlite3_reset(pIndexXInfo); + if( rc==SQLITE_OK ){ + if( p->iSample==100 ){ + zQuery = sqlite3_mprintf( + "SELECT %s FROM %Q x ORDER BY %s", zCols, zTab, zOrder + ); + }else{ + zQuery = sqlite3_mprintf( + "SELECT %s FROM temp."UNIQUE_TABLE_NAME" x ORDER BY %s", zCols, zOrder + ); + } + } + sqlite3_free(zCols); + sqlite3_free(zOrder); + + /* Formulate the query text */ + if( rc==SQLITE_OK ){ + sqlite3 *dbrem = (p->iSample==100 ? p->db : p->dbv); + rc = idxPrepareStmt(dbrem, &pQuery, pzErr, zQuery); + } + sqlite3_free(zQuery); + + if( rc==SQLITE_OK ){ + aStat = (int*)idxMalloc(&rc, sizeof(int)*(nCol+1)); + } + if( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pQuery) ){ + IdxHashEntry *pEntry; + char *zStat = 0; + for(i=0; i<=nCol; i++) aStat[i] = 1; + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pQuery) ){ + aStat[0]++; + for(i=0; ihIdx, zIdx, STRLEN(zIdx)); + if( pEntry ){ + assert( pEntry->zVal2==0 ); + pEntry->zVal2 = zStat; + }else{ + sqlite3_free(zStat); + } + } + sqlite3_free(aStat); + idxFinalize(&rc, pQuery); + + return rc; +} + +static int idxBuildSampleTable(sqlite3expert *p, const char *zTab){ + int rc; + char *zSql; + + rc = sqlite3_exec(p->dbv,"DROP TABLE IF EXISTS temp."UNIQUE_TABLE_NAME,0,0,0); + if( rc!=SQLITE_OK ) return rc; + + zSql = sqlite3_mprintf( + "CREATE TABLE temp." UNIQUE_TABLE_NAME " AS SELECT * FROM %Q", zTab + ); + if( zSql==0 ) return SQLITE_NOMEM; + rc = sqlite3_exec(p->dbv, zSql, 0, 0, 0); + sqlite3_free(zSql); + + return rc; +} + +/* +** This function is called as part of sqlite3_expert_analyze(). Candidate +** indexes have already been created in database sqlite3expert.dbm, this +** function populates sqlite_stat1 table in the same database. +** +** The stat1 data is generated by querying the +*/ +static int idxPopulateStat1(sqlite3expert *p, char **pzErr){ + int rc = SQLITE_OK; + int nMax =0; + struct IdxRemCtx *pCtx = 0; + struct IdxSampleCtx samplectx; + int i; + i64 iPrev = -100000; + sqlite3_stmt *pAllIndex = 0; + sqlite3_stmt *pIndexXInfo = 0; + sqlite3_stmt *pWrite = 0; + + const char *zAllIndex = + "SELECT s.rowid, s.name, l.name FROM " + " sqlite_master AS s, " + " pragma_index_list(s.name) AS l " + "WHERE s.type = 'table'"; + const char *zIndexXInfo = + "SELECT name, coll FROM pragma_index_xinfo(?) WHERE key"; + const char *zWrite = "INSERT INTO sqlite_stat1 VALUES(?, ?, ?)"; + + /* If iSample==0, no sqlite_stat1 data is required. */ + if( p->iSample==0 ) return SQLITE_OK; + + rc = idxLargestIndex(p->dbm, &nMax, pzErr); + if( nMax<=0 || rc!=SQLITE_OK ) return rc; + + rc = sqlite3_exec(p->dbm, "ANALYZE; PRAGMA writable_schema=1", 0, 0, 0); + + if( rc==SQLITE_OK ){ + int nByte = sizeof(struct IdxRemCtx) + (sizeof(struct IdxRemSlot) * nMax); + pCtx = (struct IdxRemCtx*)idxMalloc(&rc, nByte); + } + + if( rc==SQLITE_OK ){ + sqlite3 *dbrem = (p->iSample==100 ? p->db : p->dbv); + rc = sqlite3_create_function( + dbrem, "rem", 2, SQLITE_UTF8, (void*)pCtx, idxRemFunc, 0, 0 + ); + } + if( rc==SQLITE_OK ){ + rc = sqlite3_create_function( + p->db, "sample", 0, SQLITE_UTF8, (void*)&samplectx, idxSampleFunc, 0, 0 + ); + } + + if( rc==SQLITE_OK ){ + pCtx->nSlot = nMax+1; + rc = idxPrepareStmt(p->dbm, &pAllIndex, pzErr, zAllIndex); + } + if( rc==SQLITE_OK ){ + rc = idxPrepareStmt(p->dbm, &pIndexXInfo, pzErr, zIndexXInfo); + } + if( rc==SQLITE_OK ){ + rc = idxPrepareStmt(p->dbm, &pWrite, pzErr, zWrite); + } + + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pAllIndex) ){ + i64 iRowid = sqlite3_column_int64(pAllIndex, 0); + const char *zTab = (const char*)sqlite3_column_text(pAllIndex, 1); + const char *zIdx = (const char*)sqlite3_column_text(pAllIndex, 2); + if( p->iSample<100 && iPrev!=iRowid ){ + samplectx.target = (double)p->iSample / 100.0; + samplectx.iTarget = p->iSample; + samplectx.nRow = 0.0; + samplectx.nRet = 0.0; + rc = idxBuildSampleTable(p, zTab); + if( rc!=SQLITE_OK ) break; + } + rc = idxPopulateOneStat1(p, pIndexXInfo, pWrite, zTab, zIdx, pzErr); + iPrev = iRowid; + } + if( rc==SQLITE_OK && p->iSample<100 ){ + rc = sqlite3_exec(p->dbv, + "DROP TABLE IF EXISTS temp." UNIQUE_TABLE_NAME, 0,0,0 + ); + } + + idxFinalize(&rc, pAllIndex); + idxFinalize(&rc, pIndexXInfo); + idxFinalize(&rc, pWrite); + + for(i=0; inSlot; i++){ + sqlite3_free(pCtx->aSlot[i].z); + } + sqlite3_free(pCtx); + + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(p->dbm, "ANALYZE sqlite_master", 0, 0, 0); + } + + sqlite3_exec(p->db, "DROP TABLE IF EXISTS temp."UNIQUE_TABLE_NAME,0,0,0); + return rc; +} + +/* +** Allocate a new sqlite3expert object. +*/ +sqlite3expert *sqlite3_expert_new(sqlite3 *db, char **pzErrmsg){ + int rc = SQLITE_OK; + sqlite3expert *pNew; + + pNew = (sqlite3expert*)idxMalloc(&rc, sizeof(sqlite3expert)); + + /* Open two in-memory databases to work with. The "vtab database" (dbv) + ** will contain a virtual table corresponding to each real table in + ** the user database schema, and a copy of each view. It is used to + ** collect information regarding the WHERE, ORDER BY and other clauses + ** of the user's query. + */ + if( rc==SQLITE_OK ){ + pNew->db = db; + pNew->iSample = 100; + rc = sqlite3_open(":memory:", &pNew->dbv); + } + if( rc==SQLITE_OK ){ + rc = sqlite3_open(":memory:", &pNew->dbm); + if( rc==SQLITE_OK ){ + sqlite3_db_config(pNew->dbm, SQLITE_DBCONFIG_TRIGGER_EQP, 1, (int*)0); + } + } + + + /* Copy the entire schema of database [db] into [dbm]. */ + if( rc==SQLITE_OK ){ + sqlite3_stmt *pSql; + rc = idxPrintfPrepareStmt(pNew->db, &pSql, pzErrmsg, + "SELECT sql FROM sqlite_master WHERE name NOT LIKE 'sqlite_%%'" + " AND sql NOT LIKE 'CREATE VIRTUAL %%'" + ); + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pSql) ){ + const char *zSql = (const char*)sqlite3_column_text(pSql, 0); + rc = sqlite3_exec(pNew->dbm, zSql, 0, 0, pzErrmsg); + } + idxFinalize(&rc, pSql); + } + + /* Create the vtab schema */ + if( rc==SQLITE_OK ){ + rc = idxCreateVtabSchema(pNew, pzErrmsg); + } + + /* Register the auth callback with dbv */ + if( rc==SQLITE_OK ){ + sqlite3_set_authorizer(pNew->dbv, idxAuthCallback, (void*)pNew); + } + + /* If an error has occurred, free the new object and reutrn NULL. Otherwise, + ** return the new sqlite3expert handle. */ + if( rc!=SQLITE_OK ){ + sqlite3_expert_destroy(pNew); + pNew = 0; + } + return pNew; +} + +/* +** Configure an sqlite3expert object. +*/ +int sqlite3_expert_config(sqlite3expert *p, int op, ...){ + int rc = SQLITE_OK; + va_list ap; + va_start(ap, op); + switch( op ){ + case EXPERT_CONFIG_SAMPLE: { + int iVal = va_arg(ap, int); + if( iVal<0 ) iVal = 0; + if( iVal>100 ) iVal = 100; + p->iSample = iVal; + break; + } + default: + rc = SQLITE_NOTFOUND; + break; + } + + va_end(ap); + return rc; +} + +/* +** Add an SQL statement to the analysis. +*/ +int sqlite3_expert_sql( + sqlite3expert *p, /* From sqlite3_expert_new() */ + const char *zSql, /* SQL statement to add */ + char **pzErr /* OUT: Error message (if any) */ +){ + IdxScan *pScanOrig = p->pScan; + IdxStatement *pStmtOrig = p->pStatement; + int rc = SQLITE_OK; + const char *zStmt = zSql; + + if( p->bRun ) return SQLITE_MISUSE; + + while( rc==SQLITE_OK && zStmt && zStmt[0] ){ + sqlite3_stmt *pStmt = 0; + rc = sqlite3_prepare_v2(p->dbv, zStmt, -1, &pStmt, &zStmt); + if( rc==SQLITE_OK ){ + if( pStmt ){ + IdxStatement *pNew; + const char *z = sqlite3_sql(pStmt); + int n = STRLEN(z); + pNew = (IdxStatement*)idxMalloc(&rc, sizeof(IdxStatement) + n+1); + if( rc==SQLITE_OK ){ + pNew->zSql = (char*)&pNew[1]; + memcpy(pNew->zSql, z, n+1); + pNew->pNext = p->pStatement; + if( p->pStatement ) pNew->iId = p->pStatement->iId+1; + p->pStatement = pNew; + } + sqlite3_finalize(pStmt); + } + }else{ + idxDatabaseError(p->dbv, pzErr); + } + } + + if( rc!=SQLITE_OK ){ + idxScanFree(p->pScan, pScanOrig); + idxStatementFree(p->pStatement, pStmtOrig); + p->pScan = pScanOrig; + p->pStatement = pStmtOrig; + } + + return rc; +} + +int sqlite3_expert_analyze(sqlite3expert *p, char **pzErr){ + int rc; + IdxHashEntry *pEntry; + + /* Do trigger processing to collect any extra IdxScan structures */ + rc = idxProcessTriggers(p, pzErr); + + /* Create candidate indexes within the in-memory database file */ + if( rc==SQLITE_OK ){ + rc = idxCreateCandidates(p); + } + + /* Generate the stat1 data */ + if( rc==SQLITE_OK ){ + rc = idxPopulateStat1(p, pzErr); + } + + /* Formulate the EXPERT_REPORT_CANDIDATES text */ + for(pEntry=p->hIdx.pFirst; pEntry; pEntry=pEntry->pNext){ + p->zCandidates = idxAppendText(&rc, p->zCandidates, + "%s;%s%s\n", pEntry->zVal, + pEntry->zVal2 ? " -- stat1: " : "", pEntry->zVal2 + ); + } + + /* Figure out which of the candidate indexes are preferred by the query + ** planner and report the results to the user. */ + if( rc==SQLITE_OK ){ + rc = idxFindIndexes(p, pzErr); + } + + if( rc==SQLITE_OK ){ + p->bRun = 1; + } + return rc; +} + +/* +** Return the total number of statements that have been added to this +** sqlite3expert using sqlite3_expert_sql(). +*/ +int sqlite3_expert_count(sqlite3expert *p){ + int nRet = 0; + if( p->pStatement ) nRet = p->pStatement->iId+1; + return nRet; +} + +/* +** Return a component of the report. +*/ +const char *sqlite3_expert_report(sqlite3expert *p, int iStmt, int eReport){ + const char *zRet = 0; + IdxStatement *pStmt; + + if( p->bRun==0 ) return 0; + for(pStmt=p->pStatement; pStmt && pStmt->iId!=iStmt; pStmt=pStmt->pNext); + switch( eReport ){ + case EXPERT_REPORT_SQL: + if( pStmt ) zRet = pStmt->zSql; + break; + case EXPERT_REPORT_INDEXES: + if( pStmt ) zRet = pStmt->zIdx; + break; + case EXPERT_REPORT_PLAN: + if( pStmt ) zRet = pStmt->zEQP; + break; + case EXPERT_REPORT_CANDIDATES: + zRet = p->zCandidates; + break; + } + return zRet; +} + +/* +** Free an sqlite3expert object. +*/ +void sqlite3_expert_destroy(sqlite3expert *p){ + if( p ){ + sqlite3_close(p->dbm); + sqlite3_close(p->dbv); + idxScanFree(p->pScan, 0); + idxStatementFree(p->pStatement, 0); + idxTableFree(p->pTable); + idxWriteFree(p->pWrite); + idxHashClear(&p->hIdx); + sqlite3_free(p->zCandidates); + sqlite3_free(p); + } +} + +#endif /* ifndef SQLITE_OMIT_VIRTUAL_TABLE */ + +/************************* End ../ext/expert/sqlite3expert.c ********************/ + #if defined(SQLITE_ENABLE_SESSION) /* ** State information for a single open session @@ -2182,6 +8517,29 @@ int colWidth[100]; /* Column widths prior to ".explain on" */ }; +typedef struct ExpertInfo ExpertInfo; +struct ExpertInfo { + sqlite3expert *pExpert; + int bVerbose; +}; + +/* A single line in the EQP output */ +typedef struct EQPGraphRow EQPGraphRow; +struct EQPGraphRow { + int iEqpId; /* ID for this row */ + int iParentId; /* ID of the parent row */ + EQPGraphRow *pNext; /* Next row in sequence */ + char zText[1]; /* Text to display for this row */ +}; + +/* All EQP output is collected into an instance of the following */ +typedef struct EQPGraph EQPGraph; +struct EQPGraph { + EQPGraphRow *pRow; /* Linked list of all rows of the EQP output */ + EQPGraphRow *pLast; /* Last element of the pRow list */ + char zPrefix[100]; /* Graph prefix */ +}; + /* ** State information about the database connection is contained in an ** instance of the following structure. @@ -2189,10 +8547,15 @@ typedef struct ShellState ShellState; struct ShellState { sqlite3 *db; /* The database */ - int autoExplain; /* Automatically turn on .explain mode */ - int autoEQP; /* Run EXPLAIN QUERY PLAN prior to seach SQL stmt */ - int statsOn; /* True to display memory stats before each finalize */ - int scanstatsOn; /* True to display scan stats before each finalize */ + u8 autoExplain; /* Automatically turn on .explain mode */ + u8 autoEQP; /* Run EXPLAIN QUERY PLAN prior to seach SQL stmt */ + u8 autoEQPtest; /* autoEQP is in test mode */ + u8 statsOn; /* True to display memory stats before each finalize */ + u8 scanstatsOn; /* True to display scan stats before each finalize */ + u8 openMode; /* SHELL_OPEN_NORMAL, _APPENDVFS, or _ZIPFILE */ + u8 doXdgOpen; /* Invoke start/open/xdg-open in output_reset() */ + u8 nEqpLevel; /* Depth of the EQP output graph */ + unsigned mEqpLines; /* Mask of veritical lines in the EQP output graph */ int outCount; /* Revert to stdout when reaching zero */ int cnt; /* Number of records displayed so far */ FILE *out; /* Write results here */ @@ -2199,6 +8562,7 @@ FILE *traceOut; /* Output for sqlite3_trace() */ int nErr; /* Number of errors seen */ int mode; /* An output mode setting */ + int modePrior; /* Saved mode */ int cMode; /* temporary output mode for the current query */ int normalMode; /* Output mode before ".explain on" */ int writableSchema; /* True if PRAGMA writable_schema=ON */ @@ -2206,9 +8570,12 @@ int nCheck; /* Number of ".check" commands run */ unsigned shellFlgs; /* Various flags */ char *zDestTable; /* Name of destination table when MODE_Insert */ + char *zTempFile; /* Temporary file that might need deleting */ char zTestcase[30]; /* Name of current test case */ char colSeparator[20]; /* Column separator character for several modes */ char rowSeparator[20]; /* Row separator character for MODE_Ascii */ + char colSepPrior[20]; /* Saved column separator */ + char rowSepPrior[20]; /* Saved row separator */ int colWidth[100]; /* Requested width of each column when in column mode*/ int actualWidth[100]; /* Actual width of each column */ char nullValue[20]; /* The text to print when a NULL comes back from @@ -2222,23 +8589,41 @@ int *aiIndent; /* Array of indents used in MODE_Explain */ int nIndent; /* Size of array aiIndent[] */ int iIndent; /* Index of current op in aiIndent[] */ + EQPGraph sGraph; /* Information for the graphical EXPLAIN QUERY PLAN */ #if defined(SQLITE_ENABLE_SESSION) int nSession; /* Number of active sessions */ OpenSession aSession[4]; /* Array of sessions. [0] is in focus. */ #endif + ExpertInfo expert; /* Valid if previous command was ".expert OPT..." */ }; + +/* Allowed values for ShellState.autoEQP +*/ +#define AUTOEQP_off 0 /* Automatic EXPLAIN QUERY PLAN is off */ +#define AUTOEQP_on 1 /* Automatic EQP is on */ +#define AUTOEQP_trigger 2 /* On and also show plans for triggers */ +#define AUTOEQP_full 3 /* Show full EXPLAIN */ + +/* Allowed values for ShellState.openMode +*/ +#define SHELL_OPEN_UNSPEC 0 /* No open-mode specified */ +#define SHELL_OPEN_NORMAL 1 /* Normal database file */ +#define SHELL_OPEN_APPENDVFS 2 /* Use appendvfs */ +#define SHELL_OPEN_ZIPFILE 3 /* Use the zipfile virtual table */ +#define SHELL_OPEN_READONLY 4 /* Open a normal database read-only */ +#define SHELL_OPEN_DESERIALIZE 5 /* Open using sqlite3_deserialize() */ + /* ** These are the allowed shellFlgs values */ -#define SHFLG_Scratch 0x00000001 /* The --scratch option is used */ -#define SHFLG_Pagecache 0x00000002 /* The --pagecache option is used */ -#define SHFLG_Lookaside 0x00000004 /* Lookaside memory is used */ -#define SHFLG_Backslash 0x00000008 /* The --backslash option is used */ -#define SHFLG_PreserveRowid 0x00000010 /* .dump preserves rowid values */ -#define SHFLG_Newlines 0x00000020 /* .dump --newline flag */ -#define SHFLG_CountChanges 0x00000040 /* .changes setting */ -#define SHFLG_Echo 0x00000080 /* .echo or --echo setting */ +#define SHFLG_Pagecache 0x00000001 /* The --pagecache option is used */ +#define SHFLG_Lookaside 0x00000002 /* Lookaside memory is used */ +#define SHFLG_Backslash 0x00000004 /* The --backslash option is used */ +#define SHFLG_PreserveRowid 0x00000008 /* .dump preserves rowid values */ +#define SHFLG_Newlines 0x00000010 /* .dump --newline flag */ +#define SHFLG_CountChanges 0x00000020 /* .changes setting */ +#define SHFLG_Echo 0x00000040 /* .echo or --echo setting */ /* ** Macros for testing and setting shellFlgs @@ -2262,6 +8647,7 @@ #define MODE_Explain 9 /* Like MODE_Column, but do not truncate data */ #define MODE_Ascii 10 /* Use ASCII unit and record separators (0x1F/0x1E) */ #define MODE_Pretty 11 /* Pretty-print schemas */ +#define MODE_EQP 12 /* Converts EXPLAIN QUERY PLAN output into a graph */ static const char *modeDescr[] = { "line", @@ -2276,6 +8662,7 @@ "explain", "ascii", "prettyprint", + "eqp" }; /* @@ -2292,11 +8679,6 @@ #define SEP_Record "\x1E" /* -** Number of elements in an array -*/ -#define ArraySize(X) (int)(sizeof(X)/sizeof(X[0])) - -/* ** A callback for the sqlite3_log() interface. */ static void shellLog(void *pArg, int iErrCode, const char *zMsg){ @@ -2307,6 +8689,181 @@ } /* +** SQL function: shell_putsnl(X) +** +** Write the text X to the screen (or whatever output is being directed) +** adding a newline at the end, and then return X. +*/ +static void shellPutsFunc( + sqlite3_context *pCtx, + int nVal, + sqlite3_value **apVal +){ + ShellState *p = (ShellState*)sqlite3_user_data(pCtx); + (void)nVal; + utf8_printf(p->out, "%s\n", sqlite3_value_text(apVal[0])); + sqlite3_result_value(pCtx, apVal[0]); +} + +/* +** SQL function: edit(VALUE) +** edit(VALUE,EDITOR) +** +** These steps: +** +** (1) Write VALUE into a temporary file. +** (2) Run program EDITOR on that temporary file. +** (3) Read the temporary file back and return its content as the result. +** (4) Delete the temporary file +** +** If the EDITOR argument is omitted, use the value in the VISUAL +** environment variable. If still there is no EDITOR, through an error. +** +** Also throw an error if the EDITOR program returns a non-zero exit code. +*/ +#ifndef SQLITE_NOHAVE_SYSTEM +static void editFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + const char *zEditor; + char *zTempFile = 0; + sqlite3 *db; + char *zCmd = 0; + int bBin; + int rc; + int hasCRNL = 0; + FILE *f = 0; + sqlite3_int64 sz; + sqlite3_int64 x; + unsigned char *p = 0; + + if( argc==2 ){ + zEditor = (const char*)sqlite3_value_text(argv[1]); + }else{ + zEditor = getenv("VISUAL"); + } + if( zEditor==0 ){ + sqlite3_result_error(context, "no editor for edit()", -1); + return; + } + if( sqlite3_value_type(argv[0])==SQLITE_NULL ){ + sqlite3_result_error(context, "NULL input to edit()", -1); + return; + } + db = sqlite3_context_db_handle(context); + zTempFile = 0; + sqlite3_file_control(db, 0, SQLITE_FCNTL_TEMPFILENAME, &zTempFile); + if( zTempFile==0 ){ + sqlite3_uint64 r = 0; + sqlite3_randomness(sizeof(r), &r); + zTempFile = sqlite3_mprintf("temp%llx", r); + if( zTempFile==0 ){ + sqlite3_result_error_nomem(context); + return; + } + } + bBin = sqlite3_value_type(argv[0])==SQLITE_BLOB; + /* When writing the file to be edited, do \n to \r\n conversions on systems + ** that want \r\n line endings */ + f = fopen(zTempFile, bBin ? "wb" : "w"); + if( f==0 ){ + sqlite3_result_error(context, "edit() cannot open temp file", -1); + goto edit_func_end; + } + sz = sqlite3_value_bytes(argv[0]); + if( bBin ){ + x = fwrite(sqlite3_value_blob(argv[0]), 1, sz, f); + }else{ + const char *z = (const char*)sqlite3_value_text(argv[0]); + /* Remember whether or not the value originally contained \r\n */ + if( z && strstr(z,"\r\n")!=0 ) hasCRNL = 1; + x = fwrite(sqlite3_value_text(argv[0]), 1, sz, f); + } + fclose(f); + f = 0; + if( x!=sz ){ + sqlite3_result_error(context, "edit() could not write the whole file", -1); + goto edit_func_end; + } + zCmd = sqlite3_mprintf("%s \"%s\"", zEditor, zTempFile); + if( zCmd==0 ){ + sqlite3_result_error_nomem(context); + goto edit_func_end; + } + rc = system(zCmd); + sqlite3_free(zCmd); + if( rc ){ + sqlite3_result_error(context, "EDITOR returned non-zero", -1); + goto edit_func_end; + } + f = fopen(zTempFile, "rb"); + if( f==0 ){ + sqlite3_result_error(context, + "edit() cannot reopen temp file after edit", -1); + goto edit_func_end; + } + fseek(f, 0, SEEK_END); + sz = ftell(f); + rewind(f); + p = sqlite3_malloc64( sz+(bBin==0) ); + if( p==0 ){ + sqlite3_result_error_nomem(context); + goto edit_func_end; + } + x = fread(p, 1, sz, f); + fclose(f); + f = 0; + if( x!=sz ){ + sqlite3_result_error(context, "could not read back the whole file", -1); + goto edit_func_end; + } + if( bBin ){ + sqlite3_result_blob64(context, p, sz, sqlite3_free); + }else{ + sqlite3_int64 i, j; + if( hasCRNL ){ + /* If the original contains \r\n then do no conversions back to \n */ + j = sz; + }else{ + /* If the file did not originally contain \r\n then convert any new + ** \r\n back into \n */ + for(i=j=0; imodePrior = p->mode; + memcpy(p->colSepPrior, p->colSeparator, sizeof(p->colSeparator)); + memcpy(p->rowSepPrior, p->rowSeparator, sizeof(p->rowSeparator)); +} +static void outputModePop(ShellState *p){ + p->mode = p->modePrior; + memcpy(p->colSeparator, p->colSepPrior, sizeof(p->colSeparator)); + memcpy(p->rowSeparator, p->rowSepPrior, sizeof(p->rowSeparator)); +} + +/* ** Output the given string as a hex-encoded blob (eg. X'1234' ) */ static void output_hex_blob(FILE *out, const void *pBlob, int nBlob){ @@ -2551,12 +9108,9 @@ } } if( i==0 ){ - putc('"', out); - for(i=0; z[i]; i++){ - if( z[i]=='"' ) putc('"', out); - putc(z[i], out); - } - putc('"', out); + char *zQuoted = sqlite3_mprintf("\"%w\"", z); + utf8_printf(out, "%s", zQuoted); + sqlite3_free(zQuoted); }else{ utf8_printf(out, "%s", z); } @@ -2566,7 +9120,6 @@ } } -#ifdef SIGINT /* ** This routine runs when the user presses Ctrl-C */ @@ -2576,6 +9129,20 @@ if( seenInterrupt>2 ) exit(1); if( globalDb ) sqlite3_interrupt(globalDb); } + +#if (defined(_WIN32) || defined(WIN32)) && !defined(_WIN32_WCE) +/* +** This routine runs for console events (e.g. Ctrl-C) on Win32 +*/ +static BOOL WINAPI ConsoleCtrlHandler( + DWORD dwCtrlType /* One of the CTRL_*_EVENT constants */ +){ + if( dwCtrlType==CTRL_C_EVENT ){ + interrupt_handler(0); + return TRUE; + } + return FALSE; +} #endif #ifndef SQLITE_OMIT_AUTHORIZATION @@ -2646,6 +9213,108 @@ } /* +** Return true if string z[] has nothing but whitespace and comments to the +** end of the first line. +*/ +static int wsToEol(const char *z){ + int i; + for(i=0; z[i]; i++){ + if( z[i]=='\n' ) return 1; + if( IsSpace(z[i]) ) continue; + if( z[i]=='-' && z[i+1]=='-' ) return 1; + return 0; + } + return 1; +} + +/* +** Add a new entry to the EXPLAIN QUERY PLAN data +*/ +static void eqp_append(ShellState *p, int iEqpId, int p2, const char *zText){ + EQPGraphRow *pNew; + int nText = strlen30(zText); + if( p->autoEQPtest ){ + utf8_printf(p->out, "%d,%d,%s\n", iEqpId, p2, zText); + } + pNew = sqlite3_malloc64( sizeof(*pNew) + nText ); + if( pNew==0 ) shell_out_of_memory(); + pNew->iEqpId = iEqpId; + pNew->iParentId = p2; + memcpy(pNew->zText, zText, nText+1); + pNew->pNext = 0; + if( p->sGraph.pLast ){ + p->sGraph.pLast->pNext = pNew; + }else{ + p->sGraph.pRow = pNew; + } + p->sGraph.pLast = pNew; +} + +/* +** Free and reset the EXPLAIN QUERY PLAN data that has been collected +** in p->sGraph. +*/ +static void eqp_reset(ShellState *p){ + EQPGraphRow *pRow, *pNext; + for(pRow = p->sGraph.pRow; pRow; pRow = pNext){ + pNext = pRow->pNext; + sqlite3_free(pRow); + } + memset(&p->sGraph, 0, sizeof(p->sGraph)); +} + +/* Return the next EXPLAIN QUERY PLAN line with iEqpId that occurs after +** pOld, or return the first such line if pOld is NULL +*/ +static EQPGraphRow *eqp_next_row(ShellState *p, int iEqpId, EQPGraphRow *pOld){ + EQPGraphRow *pRow = pOld ? pOld->pNext : p->sGraph.pRow; + while( pRow && pRow->iParentId!=iEqpId ) pRow = pRow->pNext; + return pRow; +} + +/* Render a single level of the graph that has iEqpId as its parent. Called +** recursively to render sublevels. +*/ +static void eqp_render_level(ShellState *p, int iEqpId){ + EQPGraphRow *pRow, *pNext; + int n = strlen30(p->sGraph.zPrefix); + char *z; + for(pRow = eqp_next_row(p, iEqpId, 0); pRow; pRow = pNext){ + pNext = eqp_next_row(p, iEqpId, pRow); + z = pRow->zText; + utf8_printf(p->out, "%s%s%s\n", p->sGraph.zPrefix, pNext ? "|--" : "`--", z); + if( n<(int)sizeof(p->sGraph.zPrefix)-7 ){ + memcpy(&p->sGraph.zPrefix[n], pNext ? "| " : " ", 4); + eqp_render_level(p, pRow->iEqpId); + p->sGraph.zPrefix[n] = 0; + } + } +} + +/* +** Display and reset the EXPLAIN QUERY PLAN data +*/ +static void eqp_render(ShellState *p){ + EQPGraphRow *pRow = p->sGraph.pRow; + if( pRow ){ + if( pRow->zText[0]=='-' ){ + if( pRow->pNext==0 ){ + eqp_reset(p); + return; + } + utf8_printf(p->out, "%s\n", pRow->zText+3); + p->sGraph.pRow = pRow->pNext; + sqlite3_free(pRow); + }else{ + utf8_printf(p->out, "QUERY PLAN\n"); + } + p->sGraph.zPrefix[0] = 0; + eqp_render_level(p, 0); + eqp_reset(p); + } +} + +/* ** This is the callback routine that the shell ** invokes for each row of a query result. */ @@ -2659,6 +9328,7 @@ int i; ShellState *p = (ShellState*)pArg; + if( azArg==0 ) return 0; switch( p->cMode ){ case MODE_Line: { int w = 5; @@ -2773,6 +9443,7 @@ for(i=0; IsSpace(z[i]); i++){} for(; (c = z[i])!=0; i++){ if( IsSpace(c) ){ + if( z[j-1]=='\r' ) z[j-1] = '\n'; if( IsSpace(z[j-1]) || z[j-1]=='(' ) continue; }else if( (c=='(' || c==')') && j>0 && IsSpace(z[j-1]) ){ j--; @@ -2782,7 +9453,7 @@ while( j>0 && IsSpace(z[j-1]) ){ j--; } z[j] = 0; if( strlen30(z)>=79 ){ - for(i=j=0; (c = z[i])!=0; i++){ + for(i=j=0; (c = z[i])!=0; i++){ /* Copy changes from z[i] back to z[j] */ if( c==cEnd ){ cEnd = 0; }else if( c=='"' || c=='\'' || c=='`' ){ @@ -2789,6 +9460,8 @@ cEnd = c; }else if( c=='[' ){ cEnd = ']'; + }else if( c=='-' && z[i+1]=='-' ){ + cEnd = '\n'; }else if( c=='(' ){ nParen++; }else if( c==')' ){ @@ -2799,7 +9472,9 @@ } } z[j++] = c; - if( nParen==1 && (c=='(' || c==',' || c=='\n') ){ + if( nParen==1 && cEnd==0 + && (c=='(' || c=='\n' || (c==',' && !wsToEol(z+i+1))) + ){ if( c=='\n' ) j--; printSchemaLineN(p->out, z, j, "\n "); j = 0; @@ -2919,8 +9594,16 @@ }else if( aiType && aiType[i]==SQLITE_FLOAT ){ char z[50]; double r = sqlite3_column_double(p->pStmt, i); - sqlite3_snprintf(50,z,"%!.20g", r); - raw_printf(p->out, "%s", z); + sqlite3_uint64 ur; + memcpy(&ur,&r,sizeof(r)); + if( ur==0x7ff0000000000000LL ){ + raw_printf(p->out, "1e999"); + }else if( ur==0xfff0000000000000LL ){ + raw_printf(p->out, "-1e999"); + }else{ + sqlite3_snprintf(50,z,"%!.20g", r); + raw_printf(p->out, "%s", z); + } }else if( aiType && aiType[i]==SQLITE_BLOB && p->pStmt ){ const void *pBlob = sqlite3_column_blob(p->pStmt, i); int nBlob = sqlite3_column_bytes(p->pStmt, i); @@ -2988,6 +9671,10 @@ utf8_printf(p->out, "%s", p->rowSeparator); break; } + case MODE_EQP: { + eqp_append(p, atoi(azArg[0]), atoi(azArg[1]), azArg[3]); + break; + } } return 0; } @@ -3009,6 +9696,7 @@ ShellText *p = (ShellText*)pArg; int i; UNUSED_PARAMETER(az); + if( azArg==0 ) return 0; if( p->n ) appendText(p, "|", 0); for(i=0; izDestTable ){ @@ -3085,10 +9773,7 @@ n = strlen30(zName); if( cQuote ) n += n+2; z = p->zDestTable = malloc( n+1 ); - if( z==0 ){ - raw_printf(stderr,"Error: out of memory\n"); - exit(1); - } + if( z==0 ) shell_out_of_memory(); n = 0; if( cQuote ) z[n++] = cQuote; for(i=0; zName[i]; i++){ @@ -3196,7 +9881,7 @@ }; int i; for(i=0; iout==0 ) return 0; + out = pArg->out; - if( pArg && pArg->out ){ - displayStatLine(pArg, "Memory Used:", - "%lld (max %lld) bytes", SQLITE_STATUS_MEMORY_USED, bReset); - displayStatLine(pArg, "Number of Outstanding Allocations:", - "%lld (max %lld)", SQLITE_STATUS_MALLOC_COUNT, bReset); - if( pArg->shellFlgs & SHFLG_Pagecache ){ - displayStatLine(pArg, "Number of Pcache Pages Used:", - "%lld (max %lld) pages", SQLITE_STATUS_PAGECACHE_USED, bReset); + if( pArg->pStmt && (pArg->statsOn & 2) ){ + int nCol, i, x; + sqlite3_stmt *pStmt = pArg->pStmt; + char z[100]; + nCol = sqlite3_column_count(pStmt); + raw_printf(out, "%-36s %d\n", "Number of output columns:", nCol); + for(i=0; ishellFlgs & SHFLG_Scratch ){ - displayStatLine(pArg, "Number of Scratch Allocations Used:", - "%lld (max %lld)", SQLITE_STATUS_SCRATCH_USED, bReset); - } - displayStatLine(pArg, "Number of Scratch Overflow Bytes:", - "%lld (max %lld) bytes", SQLITE_STATUS_SCRATCH_OVERFLOW, bReset); - displayStatLine(pArg, "Largest Allocation:", - "%lld bytes", SQLITE_STATUS_MALLOC_SIZE, bReset); - displayStatLine(pArg, "Largest Pcache Allocation:", - "%lld bytes", SQLITE_STATUS_PAGECACHE_SIZE, bReset); - displayStatLine(pArg, "Largest Scratch Allocation:", - "%lld bytes", SQLITE_STATUS_SCRATCH_SIZE, bReset); + } + + displayStatLine(pArg, "Memory Used:", + "%lld (max %lld) bytes", SQLITE_STATUS_MEMORY_USED, bReset); + displayStatLine(pArg, "Number of Outstanding Allocations:", + "%lld (max %lld)", SQLITE_STATUS_MALLOC_COUNT, bReset); + if( pArg->shellFlgs & SHFLG_Pagecache ){ + displayStatLine(pArg, "Number of Pcache Pages Used:", + "%lld (max %lld) pages", SQLITE_STATUS_PAGECACHE_USED, bReset); + } + displayStatLine(pArg, "Number of Pcache Overflow Bytes:", + "%lld (max %lld) bytes", SQLITE_STATUS_PAGECACHE_OVERFLOW, bReset); + displayStatLine(pArg, "Largest Allocation:", + "%lld bytes", SQLITE_STATUS_MALLOC_SIZE, bReset); + displayStatLine(pArg, "Largest Pcache Allocation:", + "%lld bytes", SQLITE_STATUS_PAGECACHE_SIZE, bReset); #ifdef YYTRACKMAXSTACKDEPTH - displayStatLine(pArg, "Deepest Parser Stack:", - "%lld (max %lld)", SQLITE_STATUS_PARSER_STACK, bReset); + displayStatLine(pArg, "Deepest Parser Stack:", + "%lld (max %lld)", SQLITE_STATUS_PARSER_STACK, bReset); #endif - } - if( pArg && pArg->out && db ){ + if( db ){ if( pArg->shellFlgs & SHFLG_Lookaside ){ iHiwtr = iCur = -1; sqlite3_db_status(db, SQLITE_DBSTATUS_LOOKASIDE_USED, @@ -3308,6 +10010,9 @@ sqlite3_db_status(db, SQLITE_DBSTATUS_CACHE_WRITE, &iCur, &iHiwtr, 1); raw_printf(pArg->out, "Page cache writes: %d\n", iCur); iHiwtr = iCur = -1; + sqlite3_db_status(db, SQLITE_DBSTATUS_CACHE_SPILL, &iCur, &iHiwtr, 1); + raw_printf(pArg->out, "Page cache spills: %d\n", iCur); + iHiwtr = iCur = -1; sqlite3_db_status(db, SQLITE_DBSTATUS_SCHEMA_USED, &iCur, &iHiwtr, bReset); raw_printf(pArg->out, "Schema Heap Usage: %d bytes\n", iCur); @@ -3317,7 +10022,7 @@ iCur); } - if( pArg && pArg->out && db && pArg->pStmt ){ + if( pArg->pStmt ){ iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_FULLSCAN_STEP, bReset); raw_printf(pArg->out, "Fullscan Steps: %d\n", iCur); @@ -3327,6 +10032,12 @@ raw_printf(pArg->out, "Autoindex Inserts: %d\n", iCur); iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_VM_STEP, bReset); raw_printf(pArg->out, "Virtual Machine Steps: %d\n", iCur); + iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_REPREPARE, bReset); + raw_printf(pArg->out, "Reprepare operations: %d\n", iCur); + iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_RUN, bReset); + raw_printf(pArg->out, "Number of times run: %d\n", iCur); + iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_MEMUSED, bReset); + raw_printf(pArg->out, "Memory used by prepared stmt: %d\n", iCur); } #ifdef __linux__ @@ -3425,8 +10136,7 @@ int nAlloc = 0; /* Allocated size of p->aiIndent[], abYield */ int iOp; /* Index of operation in p->aiIndent[] */ - const char *azNext[] = { "Next", "Prev", "VPrev", "VNext", "SorterNext", - "NextIfOpen", "PrevIfOpen", 0 }; + const char *azNext[] = { "Next", "Prev", "VPrev", "VNext", "SorterNext", 0 }; const char *azYield[] = { "Yield", "SeekLT", "SeekGT", "RowSetRead", "Rewind", 0 }; const char *azGoto[] = { "Goto", 0 }; @@ -3476,7 +10186,9 @@ } nAlloc += 100; p->aiIndent = (int*)sqlite3_realloc64(p->aiIndent, nAlloc*sizeof(int)); + if( p->aiIndent==0 ) shell_out_of_memory(); abYield = (int*)sqlite3_realloc64(abYield, nAlloc*sizeof(int)); + if( abYield==0 ) shell_out_of_memory(); } abYield[iOp] = str_in_array(zOp, azYield); p->aiIndent[iOp] = 0; @@ -3542,8 +10254,7 @@ */ static void exec_prepared_stmt( ShellState *pArg, /* Pointer to ShellState */ - sqlite3_stmt *pStmt, /* Statment to run */ - int (*xCallback)(void*,int,char**,char**,int*) /* Callback function */ + sqlite3_stmt *pStmt /* Statment to run */ ){ int rc; @@ -3553,57 +10264,181 @@ rc = sqlite3_step(pStmt); /* if we have a result set... */ if( SQLITE_ROW == rc ){ - /* if we have a callback... */ - if( xCallback ){ - /* allocate space for col name ptr, value ptr, and type */ - int nCol = sqlite3_column_count(pStmt); - void *pData = sqlite3_malloc64(3*nCol*sizeof(const char*) + 1); - if( !pData ){ - rc = SQLITE_NOMEM; - }else{ - char **azCols = (char **)pData; /* Names of result columns */ - char **azVals = &azCols[nCol]; /* Results */ - int *aiTypes = (int *)&azVals[nCol]; /* Result types */ - int i, x; - assert(sizeof(int) <= sizeof(char *)); - /* save off ptrs to column names */ + /* allocate space for col name ptr, value ptr, and type */ + int nCol = sqlite3_column_count(pStmt); + void *pData = sqlite3_malloc64(3*nCol*sizeof(const char*) + 1); + if( !pData ){ + rc = SQLITE_NOMEM; + }else{ + char **azCols = (char **)pData; /* Names of result columns */ + char **azVals = &azCols[nCol]; /* Results */ + int *aiTypes = (int *)&azVals[nCol]; /* Result types */ + int i, x; + assert(sizeof(int) <= sizeof(char *)); + /* save off ptrs to column names */ + for(i=0; icMode==MODE_Insert ){ + azVals[i] = ""; + }else{ + azVals[i] = (char*)sqlite3_column_text(pStmt, i); + } + if( !azVals[i] && (aiTypes[i]!=SQLITE_NULL) ){ + rc = SQLITE_NOMEM; + break; /* from for */ + } + } /* end for */ + + /* if data and types extracted successfully... */ + if( SQLITE_ROW == rc ){ + /* call the supplied callback with the result row data */ + if( shell_callback(pArg, nCol, azVals, azCols, aiTypes) ){ + rc = SQLITE_ABORT; + }else{ + rc = sqlite3_step(pStmt); + } } - do{ - /* extract the data and data types */ - for(i=0; icMode==MODE_Insert ){ - azVals[i] = ""; - }else{ - azVals[i] = (char*)sqlite3_column_text(pStmt, i); - } - if( !azVals[i] && (aiTypes[i]!=SQLITE_NULL) ){ - rc = SQLITE_NOMEM; - break; /* from for */ - } - } /* end for */ + } while( SQLITE_ROW == rc ); + sqlite3_free(pData); + } + } +} - /* if data and types extracted successfully... */ - if( SQLITE_ROW == rc ){ - /* call the supplied callback with the result row data */ - if( xCallback(pArg, nCol, azVals, azCols, aiTypes) ){ - rc = SQLITE_ABORT; - }else{ - rc = sqlite3_step(pStmt); - } - } - } while( SQLITE_ROW == rc ); - sqlite3_free(pData); +#ifndef SQLITE_OMIT_VIRTUALTABLE +/* +** This function is called to process SQL if the previous shell command +** was ".expert". It passes the SQL in the second argument directly to +** the sqlite3expert object. +** +** If successful, SQLITE_OK is returned. Otherwise, an SQLite error +** code. In this case, (*pzErr) may be set to point to a buffer containing +** an English language error message. It is the responsibility of the +** caller to eventually free this buffer using sqlite3_free(). +*/ +static int expertHandleSQL( + ShellState *pState, + const char *zSql, + char **pzErr +){ + assert( pState->expert.pExpert ); + assert( pzErr==0 || *pzErr==0 ); + return sqlite3_expert_sql(pState->expert.pExpert, zSql, pzErr); +} + +/* +** This function is called either to silently clean up the object +** created by the ".expert" command (if bCancel==1), or to generate a +** report from it and then clean it up (if bCancel==0). +** +** If successful, SQLITE_OK is returned. Otherwise, an SQLite error +** code. In this case, (*pzErr) may be set to point to a buffer containing +** an English language error message. It is the responsibility of the +** caller to eventually free this buffer using sqlite3_free(). +*/ +static int expertFinish( + ShellState *pState, + int bCancel, + char **pzErr +){ + int rc = SQLITE_OK; + sqlite3expert *p = pState->expert.pExpert; + assert( p ); + assert( bCancel || pzErr==0 || *pzErr==0 ); + if( bCancel==0 ){ + FILE *out = pState->out; + int bVerbose = pState->expert.bVerbose; + + rc = sqlite3_expert_analyze(p, pzErr); + if( rc==SQLITE_OK ){ + int nQuery = sqlite3_expert_count(p); + int i; + + if( bVerbose ){ + const char *zCand = sqlite3_expert_report(p,0,EXPERT_REPORT_CANDIDATES); + raw_printf(out, "-- Candidates -----------------------------\n"); + raw_printf(out, "%s\n", zCand); } + for(i=0; iexpert.pExpert = 0; + return rc; +} + +/* +** Implementation of ".expert" dot command. +*/ +static int expertDotCommand( + ShellState *pState, /* Current shell tool state */ + char **azArg, /* Array of arguments passed to dot command */ + int nArg /* Number of entries in azArg[] */ +){ + int rc = SQLITE_OK; + char *zErr = 0; + int i; + int iSample = 0; + + assert( pState->expert.pExpert==0 ); + memset(&pState->expert, 0, sizeof(ExpertInfo)); + + for(i=1; rc==SQLITE_OK && i=2 && 0==strncmp(z, "-verbose", n) ){ + pState->expert.bVerbose = 1; + } + else if( n>=2 && 0==strncmp(z, "-sample", n) ){ + if( i==(nArg-1) ){ + raw_printf(stderr, "option requires an argument: %s\n", z); + rc = SQLITE_ERROR; + }else{ + iSample = (int)integerValue(azArg[++i]); + if( iSample<0 || iSample>100 ){ + raw_printf(stderr, "value out of range: %s\n", azArg[i]); + rc = SQLITE_ERROR; + } + } + } + else{ + raw_printf(stderr, "unknown option: %s\n", z); + rc = SQLITE_ERROR; + } + } + + if( rc==SQLITE_OK ){ + pState->expert.pExpert = sqlite3_expert_new(pState->db, &zErr); + if( pState->expert.pExpert==0 ){ + raw_printf(stderr, "sqlite3_expert_new: %s\n", zErr); + rc = SQLITE_ERROR; }else{ - do{ - rc = sqlite3_step(pStmt); - } while( rc == SQLITE_ROW ); + sqlite3_expert_config( + pState->expert.pExpert, EXPERT_CONFIG_SAMPLE, iSample + ); } } + + return rc; } +#endif /* ifndef SQLITE_OMIT_VIRTUALTABLE */ /* ** Execute a statement or set of statements. Print @@ -3615,11 +10450,8 @@ ** and callback data argument. */ static int shell_exec( - sqlite3 *db, /* An open database */ + ShellState *pArg, /* Pointer to ShellState */ const char *zSql, /* SQL to be evaluated */ - int (*xCallback)(void*,int,char**,char**,int*), /* Callback function */ - /* (not the same as sqlite3_exec) */ - ShellState *pArg, /* Pointer to ShellState */ char **pzErrMsg /* Error msg written here */ ){ sqlite3_stmt *pStmt = NULL; /* Statement to execute. */ @@ -3626,11 +10458,19 @@ int rc = SQLITE_OK; /* Return Code */ int rc2; const char *zLeftover; /* Tail of unprocessed SQL */ + sqlite3 *db = pArg->db; if( pzErrMsg ){ *pzErrMsg = NULL; } +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( pArg->expert.pExpert ){ + rc = expertHandleSQL(pArg, zSql, pzErrMsg); + return expertFinish(pArg, (rc!=SQLITE_OK), pzErrMsg); + } +#endif + while( zSql[0] && (SQLITE_OK == rc) ){ static const char *zStmtSql; rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, &zLeftover); @@ -3664,20 +10504,27 @@ if( pArg && pArg->autoEQP && sqlite3_strlike("EXPLAIN%",zStmtSql,0)!=0 ){ sqlite3_stmt *pExplain; char *zEQP; + int triggerEQP = 0; disable_debug_trace_modes(); + sqlite3_db_config(db, SQLITE_DBCONFIG_TRIGGER_EQP, -1, &triggerEQP); + if( pArg->autoEQP>=AUTOEQP_trigger ){ + sqlite3_db_config(db, SQLITE_DBCONFIG_TRIGGER_EQP, 1, 0); + } zEQP = sqlite3_mprintf("EXPLAIN QUERY PLAN %s", zStmtSql); rc = sqlite3_prepare_v2(db, zEQP, -1, &pExplain, 0); if( rc==SQLITE_OK ){ while( sqlite3_step(pExplain)==SQLITE_ROW ){ - raw_printf(pArg->out,"--EQP-- %d,",sqlite3_column_int(pExplain, 0)); - raw_printf(pArg->out,"%d,", sqlite3_column_int(pExplain, 1)); - raw_printf(pArg->out,"%d,", sqlite3_column_int(pExplain, 2)); - utf8_printf(pArg->out,"%s\n", sqlite3_column_text(pExplain, 3)); + const char *zEQPLine = (const char*)sqlite3_column_text(pExplain,3); + int iEqpId = sqlite3_column_int(pExplain, 0); + int iParentId = sqlite3_column_int(pExplain, 1); + if( zEQPLine[0]=='-' ) eqp_render(pArg); + eqp_append(pArg, iEqpId, iParentId, zEQPLine); } + eqp_render(pArg); } sqlite3_finalize(pExplain); sqlite3_free(zEQP); - if( pArg->autoEQP>=2 ){ + if( pArg->autoEQP>=AUTOEQP_full ){ /* Also do an EXPLAIN for ".eqp full" mode */ zEQP = sqlite3_mprintf("EXPLAIN %s", zStmtSql); rc = sqlite3_prepare_v2(db, zEQP, -1, &pExplain, 0); @@ -3684,22 +10531,34 @@ if( rc==SQLITE_OK ){ pArg->cMode = MODE_Explain; explain_data_prepare(pArg, pExplain); - exec_prepared_stmt(pArg, pExplain, xCallback); + exec_prepared_stmt(pArg, pExplain); explain_data_delete(pArg); } sqlite3_finalize(pExplain); sqlite3_free(zEQP); } + if( pArg->autoEQP>=AUTOEQP_trigger && triggerEQP==0 ){ + sqlite3_db_config(db, SQLITE_DBCONFIG_TRIGGER_EQP, 0, 0); + /* Reprepare pStmt before reactiving trace modes */ + sqlite3_finalize(pStmt); + sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + if( pArg ) pArg->pStmt = pStmt; + } restore_debug_trace_modes(); } if( pArg ){ pArg->cMode = pArg->mode; - if( pArg->autoExplain - && sqlite3_column_count(pStmt)==8 - && sqlite3_strlike("EXPLAIN%", zStmtSql,0)==0 - ){ - pArg->cMode = MODE_Explain; + if( pArg->autoExplain ){ + if( sqlite3_column_count(pStmt)==8 + && sqlite3_strlike("EXPLAIN%", zStmtSql,0)==0 + ){ + pArg->cMode = MODE_Explain; + } + if( sqlite3_column_count(pStmt)==4 + && sqlite3_strlike("EXPLAIN QUERY PLAN%", zStmtSql,0)==0 ){ + pArg->cMode = MODE_EQP; + } } /* If the shell is currently in ".explain" mode, gather the extra @@ -3709,8 +10568,9 @@ } } - exec_prepared_stmt(pArg, pStmt, xCallback); + exec_prepared_stmt(pArg, pStmt); explain_data_delete(pArg); + eqp_render(pArg); /* print usage stats if stats on */ if( pArg && pArg->statsOn ){ @@ -3788,10 +10648,7 @@ if( nCol>=nAlloc-2 ){ nAlloc = nAlloc*2 + nCol + 10; azCol = sqlite3_realloc(azCol, nAlloc*sizeof(azCol[0])); - if( azCol==0 ){ - raw_printf(stderr, "Error: out of memory\n"); - exit(1); - } + if( azCol==0 ) shell_out_of_memory(); } azCol[++nCol] = sqlite3_mprintf("%s", sqlite3_column_text(pStmt, 1)); if( sqlite3_column_int(pStmt, 5) ){ @@ -3807,6 +10664,7 @@ } } sqlite3_finalize(pStmt); + if( azCol==0 ) return 0; azCol[0] = 0; azCol[nCol+1] = 0; @@ -3890,7 +10748,7 @@ ShellState *p = (ShellState *)pArg; UNUSED_PARAMETER(azNotUsed); - if( nArg!=3 ) return 1; + if( nArg!=3 || azArg==0 ) return 0; zTable = azArg[0]; zType = azArg[1]; zSql = azArg[2]; @@ -3971,11 +10829,11 @@ savedMode = p->mode; p->zDestTable = sTable.z; p->mode = p->cMode = MODE_Insert; - rc = shell_exec(p->db, sSelect.z, shell_callback, p, 0); + rc = shell_exec(p, sSelect.z, 0); if( (rc&0xff)==SQLITE_CORRUPT ){ raw_printf(p->out, "/****** CORRUPTION ERROR *******/\n"); toggleSelectOrder(p->db); - shell_exec(p->db, sSelect.z, shell_callback, p, 0); + shell_exec(p, sSelect.z, 0); toggleSelectOrder(p->db); } p->zDestTable = savedDestTable; @@ -4026,124 +10884,239 @@ } /* -** Text of a help message +** Text of help messages. +** +** The help text for each individual command begins with a line that starts +** with ".". Subsequent lines are supplimental information. +** +** There must be two or more spaces between the end of the command and the +** start of the description of what that command does. */ -static char zHelp[] = +static const char *(azHelp[]) = { +#if defined(SQLITE_HAVE_ZLIB) && !defined(SQLITE_OMIT_VIRTUALTABLE) + ".archive ... Manage SQL archives", + " Each command must have exactly one of the following options:", + " -c, --create Create a new archive", + " -u, --update Update or add files to an existing archive", + " -t, --list List contents of archive", + " -x, --extract Extract files from archive", + " Optional arguments:", + " -v, --verbose Print each filename as it is processed", + " -f FILE, --file FILE Operate on archive FILE (default is current db)", + " -a FILE, --append FILE Operate on FILE opened using the apndvfs VFS", + " -C DIR, --directory DIR Change to directory DIR to read/extract files", + " -n, --dryrun Show the SQL that would have occurred", + " Examples:", + " .ar -cf archive.sar foo bar # Create archive.sar from files foo and bar", + " .ar -tf archive.sar # List members of archive.sar", + " .ar -xvf archive.sar # Verbosely extract files from archive.sar", + " See also:", + " http://sqlite.org/cli.html#sqlar_archive_support", +#endif #ifndef SQLITE_OMIT_AUTHORIZATION - ".auth ON|OFF Show authorizer callbacks\n" + ".auth ON|OFF Show authorizer callbacks", #endif - ".backup ?DB? FILE Backup DB (default \"main\") to FILE\n" - ".bail on|off Stop after hitting an error. Default OFF\n" - ".binary on|off Turn binary output on or off. Default OFF\n" - ".cd DIRECTORY Change the working directory to DIRECTORY\n" - ".changes on|off Show number of rows changed by SQL\n" - ".check GLOB Fail if output since .testcase does not match\n" - ".clone NEWDB Clone data into NEWDB from the existing database\n" - ".databases List names and files of attached databases\n" - ".dbinfo ?DB? Show status information about the database\n" - ".dump ?TABLE? ... Dump the database in an SQL text format\n" - " If TABLE specified, only dump tables matching\n" - " LIKE pattern TABLE.\n" - ".echo on|off Turn command echo on or off\n" - ".eqp on|off|full Enable or disable automatic EXPLAIN QUERY PLAN\n" - ".exit Exit this program\n" + ".backup ?DB? FILE Backup DB (default \"main\") to FILE", + " --append Use the appendvfs", + ".bail on|off Stop after hitting an error. Default OFF", + ".binary on|off Turn binary output on or off. Default OFF", + ".cd DIRECTORY Change the working directory to DIRECTORY", + ".changes on|off Show number of rows changed by SQL", + ".check GLOB Fail if output since .testcase does not match", + ".clone NEWDB Clone data into NEWDB from the existing database", + ".databases List names and files of attached databases", + ".dbconfig ?op? ?val? List or change sqlite3_db_config() options", + ".dbinfo ?DB? Show status information about the database", + ".dump ?TABLE? ... Render all database content as SQL", + " Options:", + " --preserve-rowids Include ROWID values in the output", + " --newlines Allow unescaped newline characters in output", + " TABLE is LIKE pattern for the tables to dump", + ".echo on|off Turn command echo on or off", + ".eqp on|off|full Enable or disable automatic EXPLAIN QUERY PLAN", + ".excel Display the output of next command in a spreadsheet", + ".exit ?CODE? Exit this program with return-code CODE", + ".expert EXPERIMENTAL. Suggest indexes for specified queries", /* Because explain mode comes on automatically now, the ".explain" mode ** is removed from the help screen. It is still supported for legacy, however */ -/*".explain ?on|off|auto? Turn EXPLAIN output mode on or off or to automatic\n"*/ - ".fullschema ?--indent? Show schema and the content of sqlite_stat tables\n" - ".headers on|off Turn display of headers on or off\n" - ".help Show this message\n" - ".import FILE TABLE Import data from FILE into TABLE\n" +/*".explain ?on|off|auto? Turn EXPLAIN output mode on or off or to automatic",*/ + ".fullschema ?--indent? Show schema and the content of sqlite_stat tables", + ".headers on|off Turn display of headers on or off", + ".help ?-all? ?PATTERN? Show help text for PATTERN", + ".import FILE TABLE Import data from FILE into TABLE", #ifndef SQLITE_OMIT_TEST_CONTROL - ".imposter INDEX TABLE Create imposter table TABLE on index INDEX\n" + ".imposter INDEX TABLE Create imposter table TABLE on index INDEX", #endif - ".indexes ?TABLE? Show names of all indexes\n" - " If TABLE specified, only show indexes for tables\n" - " matching LIKE pattern TABLE.\n" + ".indexes ?TABLE? Show names of indexes", + " If TABLE is specified, only show indexes for", + " tables matching TABLE using the LIKE operator.", #ifdef SQLITE_ENABLE_IOTRACE - ".iotrace FILE Enable I/O diagnostic logging to FILE\n" + ".iotrace FILE Enable I/O diagnostic logging to FILE", #endif - ".limit ?LIMIT? ?VAL? Display or change the value of an SQLITE_LIMIT\n" - ".lint OPTIONS Report potential schema issues. Options:\n" - " fkey-indexes Find missing foreign key indexes\n" + ".limit ?LIMIT? ?VAL? Display or change the value of an SQLITE_LIMIT", + ".lint OPTIONS Report potential schema issues.", + " Options:", + " fkey-indexes Find missing foreign key indexes", #ifndef SQLITE_OMIT_LOAD_EXTENSION - ".load FILE ?ENTRY? Load an extension library\n" + ".load FILE ?ENTRY? Load an extension library", #endif - ".log FILE|off Turn logging on or off. FILE can be stderr/stdout\n" - ".mode MODE ?TABLE? Set output mode where MODE is one of:\n" - " ascii Columns/rows delimited by 0x1F and 0x1E\n" - " csv Comma-separated values\n" - " column Left-aligned columns. (See .width)\n" - " html HTML code\n" - " insert SQL insert statements for TABLE\n" - " line One value per line\n" - " list Values delimited by \"|\"\n" - " quote Escape answers as for SQL\n" - " tabs Tab-separated values\n" - " tcl TCL list elements\n" - ".nullvalue STRING Use STRING in place of NULL values\n" - ".once FILENAME Output for the next SQL command only to FILENAME\n" - ".open ?OPTIONS? ?FILE? Close existing database and reopen FILE\n" - " The --new option starts with an empty file\n" - ".output ?FILENAME? Send output to FILENAME or stdout\n" - ".print STRING... Print literal STRING\n" - ".prompt MAIN CONTINUE Replace the standard prompts\n" - ".quit Exit this program\n" - ".read FILENAME Execute SQL in FILENAME\n" - ".restore ?DB? FILE Restore content of DB (default \"main\") from FILE\n" - ".save FILE Write in-memory database into FILE\n" - ".scanstats on|off Turn sqlite3_stmt_scanstatus() metrics on or off\n" - ".schema ?PATTERN? Show the CREATE statements matching PATTERN\n" - " Add --indent for pretty-printing\n" - ".selftest ?--init? Run tests defined in the SELFTEST table\n" - ".separator COL ?ROW? Change the column separator and optionally the row\n" - " separator for both the output mode and .import\n" + ".log FILE|off Turn logging on or off. FILE can be stderr/stdout", + ".mode MODE ?TABLE? Set output mode", + " MODE is one of:", + " ascii Columns/rows delimited by 0x1F and 0x1E", + " csv Comma-separated values", + " column Left-aligned columns. (See .width)", + " html HTML
code", + " insert SQL insert statements for TABLE", + " line One value per line", + " list Values delimited by \"|\"", + " quote Escape answers as for SQL", + " tabs Tab-separated values", + " tcl TCL list elements", + ".nullvalue STRING Use STRING in place of NULL values", + ".once (-e|-x|FILE) Output for the next SQL command only to FILE", + " If FILE begins with '|' then open as a pipe", + " Other options:", + " -e Invoke system text editor", + " -x Open in a spreadsheet", + ".open ?OPTIONS? ?FILE? Close existing database and reopen FILE", + " Options:", + " --append Use appendvfs to append database to the end of FILE", +#ifdef SQLITE_ENABLE_DESERIALIZE + " --deserialize Load into memory useing sqlite3_deserialize()", +#endif + " --new Initialize FILE to an empty database", + " --readonly Open FILE readonly", + " --zip FILE is a ZIP archive", + ".output ?FILE? Send output to FILE or stdout if FILE is omitted", + " If FILE begins with '|' then open it as a pipe.", + ".print STRING... Print literal STRING", + ".prompt MAIN CONTINUE Replace the standard prompts", + ".quit Exit this program", + ".read FILE Read input from FILE", + ".restore ?DB? FILE Restore content of DB (default \"main\") from FILE", + ".save FILE Write in-memory database into FILE", + ".scanstats on|off Turn sqlite3_stmt_scanstatus() metrics on or off", + ".schema ?PATTERN? Show the CREATE statements matching PATTERN", + " Options:", + " --indent Try to pretty-print the schema", + ".selftest ?OPTIONS? Run tests defined in the SELFTEST table", + " Options:", + " --init Create a new SELFTEST table", + " -v Verbose output", + ".separator COL ?ROW? Change the column and row separators", #if defined(SQLITE_ENABLE_SESSION) - ".session CMD ... Create or control sessions\n" + ".session ?NAME? CMD ... Create or control sessions", + " Subcommands:", + " attach TABLE Attach TABLE", + " changeset FILE Write a changeset into FILE", + " close Close one session", + " enable ?BOOLEAN? Set or query the enable bit", + " filter GLOB... Reject tables matching GLOBs", + " indirect ?BOOLEAN? Mark or query the indirect status", + " isempty Query whether the session is empty", + " list List currently open session names", + " open DB NAME Open a new session on DB", + " patchset FILE Write a patchset into FILE", + " If ?NAME? is omitted, the first defined session is used.", #endif - ".sha3sum ?OPTIONS...? Compute a SHA3 hash of database content\n" - ".shell CMD ARGS... Run CMD ARGS... in a system shell\n" - ".show Show the current values for various settings\n" - ".stats ?on|off? Show stats or turn stats on or off\n" - ".system CMD ARGS... Run CMD ARGS... in a system shell\n" - ".tables ?TABLE? List names of tables\n" - " If TABLE specified, only list tables matching\n" - " LIKE pattern TABLE.\n" - ".testcase NAME Begin redirecting output to 'testcase-out.txt'\n" - ".timeout MS Try opening locked tables for MS milliseconds\n" - ".timer on|off Turn SQL timer on or off\n" - ".trace FILE|off Output each SQL statement as it is run\n" - ".vfsinfo ?AUX? Information about the top-level VFS\n" - ".vfslist List all available VFSes\n" - ".vfsname ?AUX? Print the name of the VFS stack\n" - ".width NUM1 NUM2 ... Set column widths for \"column\" mode\n" - " Negative values right-justify\n" -; + ".sha3sum ... Compute a SHA3 hash of database content", + " Options:", + " --schema Also hash the sqlite_master table", + " --sha3-224 Use the sha3-224 algorithm", + " --sha3-256 Use the sha3-256 algorithm. This is the default.", + " --sha3-384 Use the sha3-384 algorithm", + " --sha3-512 Use the sha3-512 algorithm", + " Any other argument is a LIKE pattern for tables to hash", +#ifndef SQLITE_NOHAVE_SYSTEM + ".shell CMD ARGS... Run CMD ARGS... in a system shell", +#endif + ".show Show the current values for various settings", + ".stats ?on|off? Show stats or turn stats on or off", +#ifndef SQLITE_NOHAVE_SYSTEM + ".system CMD ARGS... Run CMD ARGS... in a system shell", +#endif + ".tables ?TABLE? List names of tables matching LIKE pattern TABLE", + ".testcase NAME Begin redirecting output to 'testcase-out.txt'", + ".timeout MS Try opening locked tables for MS milliseconds", + ".timer on|off Turn SQL timer on or off", + ".trace FILE|off Output each SQL statement as it is run", + ".vfsinfo ?AUX? Information about the top-level VFS", + ".vfslist List all available VFSes", + ".vfsname ?AUX? Print the name of the VFS stack", + ".width NUM1 NUM2 ... Set column widths for \"column\" mode", + " Negative values right-justify", +}; -#if defined(SQLITE_ENABLE_SESSION) /* -** Print help information for the ".sessions" command +** Output help text. +** +** zPattern describes the set of commands for which help text is provided. +** If zPattern is NULL, then show all commands, but only give a one-line +** description of each. +** +** Return the number of matches. */ -void session_help(ShellState *p){ - raw_printf(p->out, - ".session ?NAME? SUBCOMMAND ?ARGS...?\n" - "If ?NAME? is omitted, the first defined session is used.\n" - "Subcommands:\n" - " attach TABLE Attach TABLE\n" - " changeset FILE Write a changeset into FILE\n" - " close Close one session\n" - " enable ?BOOLEAN? Set or query the enable bit\n" - " filter GLOB... Reject tables matching GLOBs\n" - " indirect ?BOOLEAN? Mark or query the indirect status\n" - " isempty Query whether the session is empty\n" - " list List currently open session names\n" - " open DB NAME Open a new session on DB\n" - " patchset FILE Write a patchset into FILE\n" - ); +static int showHelp(FILE *out, const char *zPattern){ + int i = 0; + int j = 0; + int n = 0; + char *zPat; + if( zPattern==0 + || zPattern[0]=='0' + || strcmp(zPattern,"-a")==0 + || strcmp(zPattern,"-all")==0 + ){ + /* Show all commands, but only one line per command */ + if( zPattern==0 ) zPattern = ""; + for(i=0; idb==0 ){ - sqlite3_initialize(); - sqlite3_open(p->zDbFilename, &p->db); + if( p->openMode==SHELL_OPEN_UNSPEC ){ + if( p->zDbFilename==0 || p->zDbFilename[0]==0 ){ + p->openMode = SHELL_OPEN_NORMAL; + }else{ + p->openMode = (u8)deduceDatabaseType(p->zDbFilename, + (openFlags & OPEN_DB_ZIPFILE)!=0); + } + } + switch( p->openMode ){ + case SHELL_OPEN_APPENDVFS: { + sqlite3_open_v2(p->zDbFilename, &p->db, + SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE, "apndvfs"); + break; + } + case SHELL_OPEN_DESERIALIZE: { + sqlite3_open(0, &p->db); + break; + } + case SHELL_OPEN_ZIPFILE: { + sqlite3_open(":memory:", &p->db); + break; + } + case SHELL_OPEN_READONLY: { + sqlite3_open_v2(p->zDbFilename, &p->db, SQLITE_OPEN_READONLY, 0); + break; + } + case SHELL_OPEN_UNSPEC: + case SHELL_OPEN_NORMAL: { + sqlite3_open(p->zDbFilename, &p->db); + break; + } + } globalDb = p->db; if( p->db==0 || SQLITE_OK!=sqlite3_errcode(p->db) ){ utf8_printf(stderr,"Error: unable to open database \"%s\": %s\n", p->zDbFilename, sqlite3_errmsg(p->db)); - if( keepAlive ) return; + if( openFlags & OPEN_DB_KEEPALIVE ) return; exit(1); } #ifndef SQLITE_OMIT_LOAD_EXTENSION @@ -4252,11 +11312,54 @@ sqlite3_fileio_init(p->db, 0, 0); sqlite3_shathree_init(p->db, 0, 0); sqlite3_completion_init(p->db, 0, 0); - sqlite3_create_function(p->db, "shell_add_schema", 2, SQLITE_UTF8, 0, +#ifdef SQLITE_HAVE_ZLIB + sqlite3_zipfile_init(p->db, 0, 0); + sqlite3_sqlar_init(p->db, 0, 0); +#endif + sqlite3_create_function(p->db, "shell_add_schema", 3, SQLITE_UTF8, 0, shellAddSchemaName, 0, 0); + sqlite3_create_function(p->db, "shell_module_schema", 1, SQLITE_UTF8, 0, + shellModuleSchema, 0, 0); + sqlite3_create_function(p->db, "shell_putsnl", 1, SQLITE_UTF8, p, + shellPutsFunc, 0, 0); +#ifndef SQLITE_NOHAVE_SYSTEM + sqlite3_create_function(p->db, "edit", 1, SQLITE_UTF8, 0, + editFunc, 0, 0); + sqlite3_create_function(p->db, "edit", 2, SQLITE_UTF8, 0, + editFunc, 0, 0); +#endif + if( p->openMode==SHELL_OPEN_ZIPFILE ){ + char *zSql = sqlite3_mprintf( + "CREATE VIRTUAL TABLE zip USING zipfile(%Q);", p->zDbFilename); + sqlite3_exec(p->db, zSql, 0, 0, 0); + sqlite3_free(zSql); + } +#ifdef SQLITE_ENABLE_DESERIALIZE + else if( p->openMode==SHELL_OPEN_DESERIALIZE ){ + int nData = 0; + unsigned char *aData = (unsigned char*)readFile(p->zDbFilename, &nData); + int rc = sqlite3_deserialize(p->db, "main", aData, nData, nData, + SQLITE_DESERIALIZE_RESIZEABLE | + SQLITE_DESERIALIZE_FREEONCLOSE); + if( rc ){ + utf8_printf(stderr, "Error: sqlite3_deserialize() returns %d\n", rc); + } + } +#endif } } +/* +** Attempt to close the databaes connection. Report errors. +*/ +void close_db(sqlite3 *db){ + int rc = sqlite3_close(db); + if( rc ){ + utf8_printf(stderr, "Error: sqlite3_close() returns %d: %s\n", + rc, sqlite3_errmsg(db)); + } +} + #if HAVE_READLINE || HAVE_EDITLINE /* ** Readline completion callbacks @@ -4291,7 +11394,7 @@ ** Linenoise completion callback */ static void linenoise_completion(const char *zLine, linenoiseCompletions *lc){ - int nLine = (int)strlen(zLine); + int nLine = strlen30(zLine); int i, iStart; sqlite3_stmt *pStmt = 0; char *zSql; @@ -4298,7 +11401,7 @@ char zBuf[1000]; if( nLine>sizeof(zBuf)-30 ) return; - if( zLine[0]=='.' ) return; + if( zLine[0]=='.' || zLine[0]=='#') return; for(i=nLine-1; i>=0 && (isalnum(zLine[i]) || zLine[i]=='_'); i--){} if( i==nLine-1 ) return; iStart = i+1; @@ -4382,63 +11485,6 @@ } /* -** Return the value of a hexadecimal digit. Return -1 if the input -** is not a hex digit. -*/ -static int hexDigitValue(char c){ - if( c>='0' && c<='9' ) return c - '0'; - if( c>='a' && c<='f' ) return c - 'a' + 10; - if( c>='A' && c<='F' ) return c - 'A' + 10; - return -1; -} - -/* -** Interpret zArg as an integer value, possibly with suffixes. -*/ -static sqlite3_int64 integerValue(const char *zArg){ - sqlite3_int64 v = 0; - static const struct { char *zSuffix; int iMult; } aMult[] = { - { "KiB", 1024 }, - { "MiB", 1024*1024 }, - { "GiB", 1024*1024*1024 }, - { "KB", 1000 }, - { "MB", 1000000 }, - { "GB", 1000000000 }, - { "K", 1000 }, - { "M", 1000000 }, - { "G", 1000000000 }, - }; - int i; - int isNeg = 0; - if( zArg[0]=='-' ){ - isNeg = 1; - zArg++; - }else if( zArg[0]=='+' ){ - zArg++; - } - if( zArg[0]=='0' && zArg[1]=='x' ){ - int x; - zArg += 2; - while( (x = hexDigitValue(zArg[0]))>=0 ){ - v = (v<<4) + x; - zArg++; - } - }else{ - while( IsDigit(zArg[0]) ){ - v = v*10 + zArg[0] - '0'; - zArg++; - } - } - for(i=0; i0 && z[i-1]==';' ){ i--; } utf8_printf(f, "%.*s;\n", i, z); } @@ -4524,7 +11569,6 @@ return 0; } #endif -#endif /* ** A no-op routine that runs with the ".breakpoint" doc-command. This is @@ -4557,10 +11601,7 @@ if( p->n+1>=p->nAlloc ){ p->nAlloc += p->nAlloc + 100; p->z = sqlite3_realloc64(p->z, p->nAlloc); - if( p->z==0 ){ - raw_printf(stderr, "out of memory\n"); - exit(1); - } + if( p->z==0 ) shell_out_of_memory(); } p->z[p->n++] = (char)c; } @@ -4706,7 +11747,7 @@ char *zInsert = 0; int rc; int i, j, n; - int nTable = (int)strlen(zTable); + int nTable = strlen30(zTable); int k = 0; int cnt = 0; const int spinRate = 10000; @@ -4721,13 +11762,10 @@ } n = sqlite3_column_count(pQuery); zInsert = sqlite3_malloc64(200 + nTable + n*3); - if( zInsert==0 ){ - raw_printf(stderr, "out of memory\n"); - goto end_data_xfer; - } + if( zInsert==0 ) shell_out_of_memory(); sqlite3_snprintf(200+nTable,zInsert, "INSERT OR IGNORE INTO \"%s\" VALUES(?", zTable); - i = (int)strlen(zInsert); + i = strlen30(zInsert); for(j=1; jdb, "PRAGMA writable_schema=OFF;", 0, 0, 0); } - sqlite3_close(newDb); + close_db(newDb); } /* -** Change the output file back to stdout +** Change the output file back to stdout. +** +** If the p->doXdgOpen flag is set, that means the output was being +** redirected to a temporary file named by p->zTempFile. In that case, +** launch start/open/xdg-open on that temporary file. */ static void output_reset(ShellState *p){ if( p->outfile[0]=='|' ){ @@ -4915,6 +11957,26 @@ #endif }else{ output_file_close(p->out); +#ifndef SQLITE_NOHAVE_SYSTEM + if( p->doXdgOpen ){ + const char *zXdgOpenCmd = +#if defined(_WIN32) + "start"; +#elif defined(__APPLE__) + "open"; +#else + "xdg-open"; +#endif + char *zCmd; + zCmd = sqlite3_mprintf("%s %s", zXdgOpenCmd, p->zTempFile); + if( system(zCmd) ){ + utf8_printf(stderr, "Failed: [%s]\n", zCmd); + } + sqlite3_free(zCmd); + outputModePop(p); + p->doXdgOpen = 0; + } +#endif /* !defined(SQLITE_NOHAVE_SYSTEM) */ } p->outfile[0] = 0; p->out = stdout; @@ -4976,20 +12038,25 @@ { "schema size:", "SELECT total(length(sql)) FROM %s" }, }; - sqlite3_file *pFile = 0; int i; + unsigned iDataVersion; char *zSchemaTab; char *zDb = nArg>=2 ? azArg[1] : "main"; + sqlite3_stmt *pStmt = 0; unsigned char aHdr[100]; open_db(p, 0); if( p->db==0 ) return 1; - sqlite3_file_control(p->db, zDb, SQLITE_FCNTL_FILE_POINTER, &pFile); - if( pFile==0 || pFile->pMethods==0 || pFile->pMethods->xRead==0 ){ - return 1; - } - i = pFile->pMethods->xRead(pFile, aHdr, 100, 0); - if( i!=SQLITE_OK ){ + sqlite3_prepare_v2(p->db,"SELECT data FROM sqlite_dbpage(?1) WHERE pgno=1", + -1, &pStmt, 0); + sqlite3_bind_text(pStmt, 1, zDb, -1, SQLITE_STATIC); + if( sqlite3_step(pStmt)==SQLITE_ROW + && sqlite3_column_bytes(pStmt,0)>100 + ){ + memcpy(aHdr, sqlite3_column_blob(pStmt,0), 100); + sqlite3_finalize(pStmt); + }else{ raw_printf(stderr, "unable to read database header\n"); + sqlite3_finalize(pStmt); return 1; } i = get2byteInt(aHdr+16); @@ -5025,6 +12092,8 @@ utf8_printf(p->out, "%-20s %d\n", aQuery[i].zName, val); } sqlite3_free(zSchemaTab); + sqlite3_file_control(p->db, zDb, SQLITE_FCNTL_DATA_VERSION, &iDataVersion); + utf8_printf(p->out, "%-20s %u\n", "data version", iDataVersion); return 0; } @@ -5038,14 +12107,6 @@ } /* -** Print an out-of-memory message to stderr and return 1. -*/ -static int shellNomemError(void){ - raw_printf(stderr, "Error: out of memory\n"); - return 1; -} - -/* ** Compare the pattern in zGlob[] against the text in z[]. Return TRUE ** if they match and FALSE (0) if they do not match. ** @@ -5169,8 +12230,43 @@ return rc; } +/* +** Try to delete the temporary file (if there is one) and free the +** memory used to hold the name of the temp file. +*/ +static void clearTempFile(ShellState *p){ + if( p->zTempFile==0 ) return; + if( p->doXdgOpen ) return; + if( shellDeleteFile(p->zTempFile) ) return; + sqlite3_free(p->zTempFile); + p->zTempFile = 0; +} /* +** Create a new temp file name with the given suffix. +*/ +static void newTempFile(ShellState *p, const char *zSuffix){ + clearTempFile(p); + sqlite3_free(p->zTempFile); + p->zTempFile = 0; + if( p->db ){ + sqlite3_file_control(p->db, 0, SQLITE_FCNTL_TEMPFILENAME, &p->zTempFile); + } + if( p->zTempFile==0 ){ + sqlite3_uint64 r; + sqlite3_randomness(sizeof(r), &r); + p->zTempFile = sqlite3_mprintf("temp%llx.%s", r, zSuffix); + }else{ + p->zTempFile = sqlite3_mprintf("%z.%s", p->zTempFile, zSuffix); + } + if( p->zTempFile==0 ){ + raw_printf(stderr, "out of memory\n"); + exit(1); + } +} + + +/* ** The implementation of SQL scalar function fkey_collate_clause(), used ** by the ".lint fkey-indexes" command. This scalar function is always ** called with four arguments - the parent table name, the parent column name, @@ -5246,10 +12342,10 @@ ** ** 0. The text of an SQL statement similar to: ** - ** "EXPLAIN QUERY PLAN SELECT rowid FROM child_table WHERE child_key=?" + ** "EXPLAIN QUERY PLAN SELECT 1 FROM child_table WHERE child_key=?" ** - ** This is the same SELECT that the foreign keys implementation needs - ** to run internally on child tables. If there is an index that can + ** This SELECT is similar to the one that the foreign keys implementation + ** needs to run internally on child tables. If there is an index that can ** be used to optimize this query, then it can also be used by the FK ** implementation to optimize DELETE or UPDATE statements on the parent ** table. @@ -5277,7 +12373,7 @@ */ const char *zSql = "SELECT " - " 'EXPLAIN QUERY PLAN SELECT rowid FROM ' || quote(s.name) || ' WHERE '" + " 'EXPLAIN QUERY PLAN SELECT 1 FROM ' || quote(s.name) || ' WHERE '" " || group_concat(quote(s.name) || '.' || quote(f.[from]) || '=?' " " || fkey_collate_clause(" " f.[table], COALESCE(f.[to], p.[name]), s.name, f.[from]),' AND ')" @@ -5305,7 +12401,7 @@ const char *zGlobIPK = "SEARCH TABLE * USING INTEGER PRIMARY KEY (rowid=?)"; for(i=2; i1 && sqlite3_strnicmp("-verbose", azArg[i], n)==0 ){ bVerbose = 1; } @@ -5408,7 +12504,7 @@ int nArg /* Number of entries in azArg[] */ ){ int n; - n = (nArg>=2 ? (int)strlen(azArg[1]) : 0); + n = (nArg>=2 ? strlen30(azArg[1]) : 0); if( n<1 || sqlite3_strnicmp(azArg[1], "fkey-indexes", n) ) goto usage; return lintFkeyIndexes(pState, azArg, nArg); @@ -5419,8 +12515,741 @@ return SQLITE_ERROR; } +#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB) +/********************************************************************************* +** The ".archive" or ".ar" command. +*/ +static void shellPrepare( + sqlite3 *db, + int *pRc, + const char *zSql, + sqlite3_stmt **ppStmt +){ + *ppStmt = 0; + if( *pRc==SQLITE_OK ){ + int rc = sqlite3_prepare_v2(db, zSql, -1, ppStmt, 0); + if( rc!=SQLITE_OK ){ + raw_printf(stderr, "sql error: %s (%d)\n", + sqlite3_errmsg(db), sqlite3_errcode(db) + ); + *pRc = rc; + } + } +} +static void shellPreparePrintf( + sqlite3 *db, + int *pRc, + sqlite3_stmt **ppStmt, + const char *zFmt, + ... +){ + *ppStmt = 0; + if( *pRc==SQLITE_OK ){ + va_list ap; + char *z; + va_start(ap, zFmt); + z = sqlite3_vmprintf(zFmt, ap); + va_end(ap); + if( z==0 ){ + *pRc = SQLITE_NOMEM; + }else{ + shellPrepare(db, pRc, z, ppStmt); + sqlite3_free(z); + } + } +} + +static void shellFinalize( + int *pRc, + sqlite3_stmt *pStmt +){ + if( pStmt ){ + sqlite3 *db = sqlite3_db_handle(pStmt); + int rc = sqlite3_finalize(pStmt); + if( *pRc==SQLITE_OK ){ + if( rc!=SQLITE_OK ){ + raw_printf(stderr, "SQL error: %s\n", sqlite3_errmsg(db)); + } + *pRc = rc; + } + } +} + +static void shellReset( + int *pRc, + sqlite3_stmt *pStmt +){ + int rc = sqlite3_reset(pStmt); + if( *pRc==SQLITE_OK ){ + if( rc!=SQLITE_OK ){ + sqlite3 *db = sqlite3_db_handle(pStmt); + raw_printf(stderr, "SQL error: %s\n", sqlite3_errmsg(db)); + } + *pRc = rc; + } +} /* +** Structure representing a single ".ar" command. +*/ +typedef struct ArCommand ArCommand; +struct ArCommand { + u8 eCmd; /* An AR_CMD_* value */ + u8 bVerbose; /* True if --verbose */ + u8 bZip; /* True if the archive is a ZIP */ + u8 bDryRun; /* True if --dry-run */ + u8 bAppend; /* True if --append */ + u8 fromCmdLine; /* Run from -A instead of .archive */ + int nArg; /* Number of command arguments */ + char *zSrcTable; /* "sqlar", "zipfile($file)" or "zip" */ + const char *zFile; /* --file argument, or NULL */ + const char *zDir; /* --directory argument, or NULL */ + char **azArg; /* Array of command arguments */ + ShellState *p; /* Shell state */ + sqlite3 *db; /* Database containing the archive */ +}; + +/* +** Print a usage message for the .ar command to stderr and return SQLITE_ERROR. +*/ +static int arUsage(FILE *f){ + showHelp(f,"archive"); + return SQLITE_ERROR; +} + +/* +** Print an error message for the .ar command to stderr and return +** SQLITE_ERROR. +*/ +static int arErrorMsg(ArCommand *pAr, const char *zFmt, ...){ + va_list ap; + char *z; + va_start(ap, zFmt); + z = sqlite3_vmprintf(zFmt, ap); + va_end(ap); + utf8_printf(stderr, "Error: %s\n", z); + if( pAr->fromCmdLine ){ + utf8_printf(stderr, "Use \"-A\" for more help\n"); + }else{ + utf8_printf(stderr, "Use \".archive --help\" for more help\n"); + } + sqlite3_free(z); + return SQLITE_ERROR; +} + +/* +** Values for ArCommand.eCmd. +*/ +#define AR_CMD_CREATE 1 +#define AR_CMD_EXTRACT 2 +#define AR_CMD_LIST 3 +#define AR_CMD_UPDATE 4 +#define AR_CMD_HELP 5 + +/* +** Other (non-command) switches. +*/ +#define AR_SWITCH_VERBOSE 6 +#define AR_SWITCH_FILE 7 +#define AR_SWITCH_DIRECTORY 8 +#define AR_SWITCH_APPEND 9 +#define AR_SWITCH_DRYRUN 10 + +static int arProcessSwitch(ArCommand *pAr, int eSwitch, const char *zArg){ + switch( eSwitch ){ + case AR_CMD_CREATE: + case AR_CMD_EXTRACT: + case AR_CMD_LIST: + case AR_CMD_UPDATE: + case AR_CMD_HELP: + if( pAr->eCmd ){ + return arErrorMsg(pAr, "multiple command options"); + } + pAr->eCmd = eSwitch; + break; + + case AR_SWITCH_DRYRUN: + pAr->bDryRun = 1; + break; + case AR_SWITCH_VERBOSE: + pAr->bVerbose = 1; + break; + case AR_SWITCH_APPEND: + pAr->bAppend = 1; + /* Fall thru into --file */ + case AR_SWITCH_FILE: + pAr->zFile = zArg; + break; + case AR_SWITCH_DIRECTORY: + pAr->zDir = zArg; + break; + } + + return SQLITE_OK; +} + +/* +** Parse the command line for an ".ar" command. The results are written into +** structure (*pAr). SQLITE_OK is returned if the command line is parsed +** successfully, otherwise an error message is written to stderr and +** SQLITE_ERROR returned. +*/ +static int arParseCommand( + char **azArg, /* Array of arguments passed to dot command */ + int nArg, /* Number of entries in azArg[] */ + ArCommand *pAr /* Populate this object */ +){ + struct ArSwitch { + const char *zLong; + char cShort; + u8 eSwitch; + u8 bArg; + } aSwitch[] = { + { "create", 'c', AR_CMD_CREATE, 0 }, + { "extract", 'x', AR_CMD_EXTRACT, 0 }, + { "list", 't', AR_CMD_LIST, 0 }, + { "update", 'u', AR_CMD_UPDATE, 0 }, + { "help", 'h', AR_CMD_HELP, 0 }, + { "verbose", 'v', AR_SWITCH_VERBOSE, 0 }, + { "file", 'f', AR_SWITCH_FILE, 1 }, + { "append", 'a', AR_SWITCH_APPEND, 1 }, + { "directory", 'C', AR_SWITCH_DIRECTORY, 1 }, + { "dryrun", 'n', AR_SWITCH_DRYRUN, 0 }, + }; + int nSwitch = sizeof(aSwitch) / sizeof(struct ArSwitch); + struct ArSwitch *pEnd = &aSwitch[nSwitch]; + + if( nArg<=1 ){ + utf8_printf(stderr, "Wrong number of arguments. Usage:\n"); + return arUsage(stderr); + }else{ + char *z = azArg[1]; + if( z[0]!='-' ){ + /* Traditional style [tar] invocation */ + int i; + int iArg = 2; + for(i=0; z[i]; i++){ + const char *zArg = 0; + struct ArSwitch *pOpt; + for(pOpt=&aSwitch[0]; pOptcShort ) break; + } + if( pOpt==pEnd ){ + return arErrorMsg(pAr, "unrecognized option: %c", z[i]); + } + if( pOpt->bArg ){ + if( iArg>=nArg ){ + return arErrorMsg(pAr, "option requires an argument: %c",z[i]); + } + zArg = azArg[iArg++]; + } + if( arProcessSwitch(pAr, pOpt->eSwitch, zArg) ) return SQLITE_ERROR; + } + pAr->nArg = nArg-iArg; + if( pAr->nArg>0 ){ + pAr->azArg = &azArg[iArg]; + } + }else{ + /* Non-traditional invocation */ + int iArg; + for(iArg=1; iArgazArg = &azArg[iArg]; + pAr->nArg = nArg-iArg; + break; + } + n = strlen30(z); + + if( z[1]!='-' ){ + int i; + /* One or more short options */ + for(i=1; icShort ) break; + } + if( pOpt==pEnd ){ + return arErrorMsg(pAr, "unrecognized option: %c", z[i]); + } + if( pOpt->bArg ){ + if( i<(n-1) ){ + zArg = &z[i+1]; + i = n; + }else{ + if( iArg>=(nArg-1) ){ + return arErrorMsg(pAr, "option requires an argument: %c",z[i]); + } + zArg = azArg[++iArg]; + } + } + if( arProcessSwitch(pAr, pOpt->eSwitch, zArg) ) return SQLITE_ERROR; + } + }else if( z[2]=='\0' ){ + /* A -- option, indicating that all remaining command line words + ** are command arguments. */ + pAr->azArg = &azArg[iArg+1]; + pAr->nArg = nArg-iArg-1; + break; + }else{ + /* A long option */ + const char *zArg = 0; /* Argument for option, if any */ + struct ArSwitch *pMatch = 0; /* Matching option */ + struct ArSwitch *pOpt; /* Iterator */ + for(pOpt=&aSwitch[0]; pOptzLong; + if( (n-2)<=strlen30(zLong) && 0==memcmp(&z[2], zLong, n-2) ){ + if( pMatch ){ + return arErrorMsg(pAr, "ambiguous option: %s",z); + }else{ + pMatch = pOpt; + } + } + } + + if( pMatch==0 ){ + return arErrorMsg(pAr, "unrecognized option: %s", z); + } + if( pMatch->bArg ){ + if( iArg>=(nArg-1) ){ + return arErrorMsg(pAr, "option requires an argument: %s", z); + } + zArg = azArg[++iArg]; + } + if( arProcessSwitch(pAr, pMatch->eSwitch, zArg) ) return SQLITE_ERROR; + } + } + } + } + + return SQLITE_OK; +} + +/* +** This function assumes that all arguments within the ArCommand.azArg[] +** array refer to archive members, as for the --extract or --list commands. +** It checks that each of them are present. If any specified file is not +** present in the archive, an error is printed to stderr and an error +** code returned. Otherwise, if all specified arguments are present in +** the archive, SQLITE_OK is returned. +** +** This function strips any trailing '/' characters from each argument. +** This is consistent with the way the [tar] command seems to work on +** Linux. +*/ +static int arCheckEntries(ArCommand *pAr){ + int rc = SQLITE_OK; + if( pAr->nArg ){ + int i, j; + sqlite3_stmt *pTest = 0; + + shellPreparePrintf(pAr->db, &rc, &pTest, + "SELECT name FROM %s WHERE name=$name", + pAr->zSrcTable + ); + j = sqlite3_bind_parameter_index(pTest, "$name"); + for(i=0; inArg && rc==SQLITE_OK; i++){ + char *z = pAr->azArg[i]; + int n = strlen30(z); + int bOk = 0; + while( n>0 && z[n-1]=='/' ) n--; + z[n] = '\0'; + sqlite3_bind_text(pTest, j, z, -1, SQLITE_STATIC); + if( SQLITE_ROW==sqlite3_step(pTest) ){ + bOk = 1; + } + shellReset(&rc, pTest); + if( rc==SQLITE_OK && bOk==0 ){ + utf8_printf(stderr, "not found in archive: %s\n", z); + rc = SQLITE_ERROR; + } + } + shellFinalize(&rc, pTest); + } + return rc; +} + +/* +** Format a WHERE clause that can be used against the "sqlar" table to +** identify all archive members that match the command arguments held +** in (*pAr). Leave this WHERE clause in (*pzWhere) before returning. +** The caller is responsible for eventually calling sqlite3_free() on +** any non-NULL (*pzWhere) value. +*/ +static void arWhereClause( + int *pRc, + ArCommand *pAr, + char **pzWhere /* OUT: New WHERE clause */ +){ + char *zWhere = 0; + if( *pRc==SQLITE_OK ){ + if( pAr->nArg==0 ){ + zWhere = sqlite3_mprintf("1"); + }else{ + int i; + const char *zSep = ""; + for(i=0; inArg; i++){ + const char *z = pAr->azArg[i]; + zWhere = sqlite3_mprintf( + "%z%s name = '%q' OR substr(name,1,%d) = '%q/'", + zWhere, zSep, z, strlen30(z)+1, z + ); + if( zWhere==0 ){ + *pRc = SQLITE_NOMEM; + break; + } + zSep = " OR "; + } + } + } + *pzWhere = zWhere; +} + +/* +** Implementation of .ar "lisT" command. +*/ +static int arListCommand(ArCommand *pAr){ + const char *zSql = "SELECT %s FROM %s WHERE %s"; + const char *azCols[] = { + "name", + "lsmode(mode), sz, datetime(mtime, 'unixepoch'), name" + }; + + char *zWhere = 0; + sqlite3_stmt *pSql = 0; + int rc; + + rc = arCheckEntries(pAr); + arWhereClause(&rc, pAr, &zWhere); + + shellPreparePrintf(pAr->db, &rc, &pSql, zSql, azCols[pAr->bVerbose], + pAr->zSrcTable, zWhere); + if( pAr->bDryRun ){ + utf8_printf(pAr->p->out, "%s\n", sqlite3_sql(pSql)); + }else{ + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pSql) ){ + if( pAr->bVerbose ){ + utf8_printf(pAr->p->out, "%s % 10d %s %s\n", + sqlite3_column_text(pSql, 0), + sqlite3_column_int(pSql, 1), + sqlite3_column_text(pSql, 2), + sqlite3_column_text(pSql, 3) + ); + }else{ + utf8_printf(pAr->p->out, "%s\n", sqlite3_column_text(pSql, 0)); + } + } + } + shellFinalize(&rc, pSql); + sqlite3_free(zWhere); + return rc; +} + + +/* +** Implementation of .ar "eXtract" command. +*/ +static int arExtractCommand(ArCommand *pAr){ + const char *zSql1 = + "SELECT " + " ($dir || name)," + " writefile(($dir || name), %s, mode, mtime) " + "FROM %s WHERE (%s) AND (data IS NULL OR $dirOnly = 0)" + " AND name NOT GLOB '*..[/\\]*'"; + + const char *azExtraArg[] = { + "sqlar_uncompress(data, sz)", + "data" + }; + + sqlite3_stmt *pSql = 0; + int rc = SQLITE_OK; + char *zDir = 0; + char *zWhere = 0; + int i, j; + + /* If arguments are specified, check that they actually exist within + ** the archive before proceeding. And formulate a WHERE clause to + ** match them. */ + rc = arCheckEntries(pAr); + arWhereClause(&rc, pAr, &zWhere); + + if( rc==SQLITE_OK ){ + if( pAr->zDir ){ + zDir = sqlite3_mprintf("%s/", pAr->zDir); + }else{ + zDir = sqlite3_mprintf(""); + } + if( zDir==0 ) rc = SQLITE_NOMEM; + } + + shellPreparePrintf(pAr->db, &rc, &pSql, zSql1, + azExtraArg[pAr->bZip], pAr->zSrcTable, zWhere + ); + + if( rc==SQLITE_OK ){ + j = sqlite3_bind_parameter_index(pSql, "$dir"); + sqlite3_bind_text(pSql, j, zDir, -1, SQLITE_STATIC); + + /* Run the SELECT statement twice. The first time, writefile() is called + ** for all archive members that should be extracted. The second time, + ** only for the directories. This is because the timestamps for + ** extracted directories must be reset after they are populated (as + ** populating them changes the timestamp). */ + for(i=0; i<2; i++){ + j = sqlite3_bind_parameter_index(pSql, "$dirOnly"); + sqlite3_bind_int(pSql, j, i); + if( pAr->bDryRun ){ + utf8_printf(pAr->p->out, "%s\n", sqlite3_sql(pSql)); + }else{ + while( rc==SQLITE_OK && SQLITE_ROW==sqlite3_step(pSql) ){ + if( i==0 && pAr->bVerbose ){ + utf8_printf(pAr->p->out, "%s\n", sqlite3_column_text(pSql, 0)); + } + } + } + shellReset(&rc, pSql); + } + shellFinalize(&rc, pSql); + } + + sqlite3_free(zDir); + sqlite3_free(zWhere); + return rc; +} + +/* +** Run the SQL statement in zSql. Or if doing a --dryrun, merely print it out. +*/ +static int arExecSql(ArCommand *pAr, const char *zSql){ + int rc; + if( pAr->bDryRun ){ + utf8_printf(pAr->p->out, "%s\n", zSql); + rc = SQLITE_OK; + }else{ + char *zErr = 0; + rc = sqlite3_exec(pAr->db, zSql, 0, 0, &zErr); + if( zErr ){ + utf8_printf(stdout, "ERROR: %s\n", zErr); + sqlite3_free(zErr); + } + } + return rc; +} + + +/* +** Implementation of .ar "create" and "update" commands. +** +** Create the "sqlar" table in the database if it does not already exist. +** Then add each file in the azFile[] array to the archive. Directories +** are added recursively. If argument bVerbose is non-zero, a message is +** printed on stdout for each file archived. +** +** The create command is the same as update, except that it drops +** any existing "sqlar" table before beginning. +*/ +static int arCreateOrUpdateCommand( + ArCommand *pAr, /* Command arguments and options */ + int bUpdate /* true for a --create. false for --update */ +){ + const char *zCreate = + "CREATE TABLE IF NOT EXISTS sqlar(\n" + " name TEXT PRIMARY KEY, -- name of the file\n" + " mode INT, -- access permissions\n" + " mtime INT, -- last modification time\n" + " sz INT, -- original file size\n" + " data BLOB -- compressed content\n" + ")"; + const char *zDrop = "DROP TABLE IF EXISTS sqlar"; + const char *zInsertFmt[2] = { + "REPLACE INTO %s(name,mode,mtime,sz,data)\n" + " SELECT\n" + " %s,\n" + " mode,\n" + " mtime,\n" + " CASE substr(lsmode(mode),1,1)\n" + " WHEN '-' THEN length(data)\n" + " WHEN 'd' THEN 0\n" + " ELSE -1 END,\n" + " sqlar_compress(data)\n" + " FROM fsdir(%Q,%Q)\n" + " WHERE lsmode(mode) NOT LIKE '?%%';", + "REPLACE INTO %s(name,mode,mtime,data)\n" + " SELECT\n" + " %s,\n" + " mode,\n" + " mtime,\n" + " data\n" + " FROM fsdir(%Q,%Q)\n" + " WHERE lsmode(mode) NOT LIKE '?%%';" + }; + int i; /* For iterating through azFile[] */ + int rc; /* Return code */ + const char *zTab = 0; /* SQL table into which to insert */ + char *zSql; + char zTemp[50]; + + arExecSql(pAr, "PRAGMA page_size=512"); + rc = arExecSql(pAr, "SAVEPOINT ar;"); + if( rc!=SQLITE_OK ) return rc; + zTemp[0] = 0; + if( pAr->bZip ){ + /* Initialize the zipfile virtual table, if necessary */ + if( pAr->zFile ){ + sqlite3_uint64 r; + sqlite3_randomness(sizeof(r),&r); + sqlite3_snprintf(sizeof(zTemp),zTemp,"zip%016llx",r); + zTab = zTemp; + zSql = sqlite3_mprintf( + "CREATE VIRTUAL TABLE temp.%s USING zipfile(%Q)", + zTab, pAr->zFile + ); + rc = arExecSql(pAr, zSql); + sqlite3_free(zSql); + }else{ + zTab = "zip"; + } + }else{ + /* Initialize the table for an SQLAR */ + zTab = "sqlar"; + if( bUpdate==0 ){ + rc = arExecSql(pAr, zDrop); + if( rc!=SQLITE_OK ) goto end_ar_transaction; + } + rc = arExecSql(pAr, zCreate); + } + for(i=0; inArg && rc==SQLITE_OK; i++){ + char *zSql2 = sqlite3_mprintf(zInsertFmt[pAr->bZip], zTab, + pAr->bVerbose ? "shell_putsnl(name)" : "name", + pAr->azArg[i], pAr->zDir); + rc = arExecSql(pAr, zSql2); + sqlite3_free(zSql2); + } +end_ar_transaction: + if( rc!=SQLITE_OK ){ + arExecSql(pAr, "ROLLBACK TO ar; RELEASE ar;"); + }else{ + rc = arExecSql(pAr, "RELEASE ar;"); + if( pAr->bZip && pAr->zFile ){ + zSql = sqlite3_mprintf("DROP TABLE %s", zTemp); + arExecSql(pAr, zSql); + sqlite3_free(zSql); + } + } + return rc; +} + +/* +** Implementation of ".ar" dot command. +*/ +static int arDotCommand( + ShellState *pState, /* Current shell tool state */ + int fromCmdLine, /* True if -A command-line option, not .ar cmd */ + char **azArg, /* Array of arguments passed to dot command */ + int nArg /* Number of entries in azArg[] */ +){ + ArCommand cmd; + int rc; + memset(&cmd, 0, sizeof(cmd)); + cmd.fromCmdLine = fromCmdLine; + rc = arParseCommand(azArg, nArg, &cmd); + if( rc==SQLITE_OK ){ + int eDbType = SHELL_OPEN_UNSPEC; + cmd.p = pState; + cmd.db = pState->db; + if( cmd.zFile ){ + eDbType = deduceDatabaseType(cmd.zFile, 1); + }else{ + eDbType = pState->openMode; + } + if( eDbType==SHELL_OPEN_ZIPFILE ){ + if( cmd.eCmd==AR_CMD_EXTRACT || cmd.eCmd==AR_CMD_LIST ){ + if( cmd.zFile==0 ){ + cmd.zSrcTable = sqlite3_mprintf("zip"); + }else{ + cmd.zSrcTable = sqlite3_mprintf("zipfile(%Q)", cmd.zFile); + } + } + cmd.bZip = 1; + }else if( cmd.zFile ){ + int flags; + if( cmd.bAppend ) eDbType = SHELL_OPEN_APPENDVFS; + if( cmd.eCmd==AR_CMD_CREATE || cmd.eCmd==AR_CMD_UPDATE ){ + flags = SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE; + }else{ + flags = SQLITE_OPEN_READONLY; + } + cmd.db = 0; + if( cmd.bDryRun ){ + utf8_printf(pState->out, "-- open database '%s'%s\n", cmd.zFile, + eDbType==SHELL_OPEN_APPENDVFS ? " using 'apndvfs'" : ""); + } + rc = sqlite3_open_v2(cmd.zFile, &cmd.db, flags, + eDbType==SHELL_OPEN_APPENDVFS ? "apndvfs" : 0); + if( rc!=SQLITE_OK ){ + utf8_printf(stderr, "cannot open file: %s (%s)\n", + cmd.zFile, sqlite3_errmsg(cmd.db) + ); + goto end_ar_command; + } + sqlite3_fileio_init(cmd.db, 0, 0); + sqlite3_sqlar_init(cmd.db, 0, 0); + sqlite3_create_function(cmd.db, "shell_putsnl", 1, SQLITE_UTF8, cmd.p, + shellPutsFunc, 0, 0); + + } + if( cmd.zSrcTable==0 && cmd.bZip==0 && cmd.eCmd!=AR_CMD_HELP ){ + if( cmd.eCmd!=AR_CMD_CREATE + && sqlite3_table_column_metadata(cmd.db,0,"sqlar","name",0,0,0,0,0) + ){ + utf8_printf(stderr, "database does not contain an 'sqlar' table\n"); + rc = SQLITE_ERROR; + goto end_ar_command; + } + cmd.zSrcTable = sqlite3_mprintf("sqlar"); + } + + switch( cmd.eCmd ){ + case AR_CMD_CREATE: + rc = arCreateOrUpdateCommand(&cmd, 0); + break; + + case AR_CMD_EXTRACT: + rc = arExtractCommand(&cmd); + break; + + case AR_CMD_LIST: + rc = arListCommand(&cmd); + break; + + case AR_CMD_HELP: + arUsage(pState->out); + break; + + default: + assert( cmd.eCmd==AR_CMD_UPDATE ); + rc = arCreateOrUpdateCommand(&cmd, 1); + break; + } + } +end_ar_command: + if( cmd.db!=pState->db ){ + close_db(cmd.db); + } + sqlite3_free(cmd.zSrcTable); + + return rc; +} +/* End of the ".archive" or ".ar" command logic +**********************************************************************************/ +#endif /* !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB) */ + + +/* ** If an input line begins with "." then invoke this routine to ** process that line. ** @@ -5433,6 +13262,12 @@ int rc = 0; char *azArg[50]; +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( p->expert.pExpert ){ + expertFinish(p, 1, 0); + } +#endif + /* Parse the input line into tokens. */ while( zLine[h] && nArg=3 && strncmp(azArg[0], "backup", n)==0) || (c=='s' && n>=3 && strncmp(azArg[0], "save", n)==0) ){ @@ -5487,11 +13330,14 @@ sqlite3 *pDest; sqlite3_backup *pBackup; int j; + const char *zVfs = 0; for(j=1; jdb, zDb); if( pBackup==0 ){ utf8_printf(stderr, "Error: %s\n", sqlite3_errmsg(pDest)); - sqlite3_close(pDest); + close_db(pDest); return 1; } while( (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK ){} @@ -5532,7 +13379,7 @@ utf8_printf(stderr, "Error: %s\n", sqlite3_errmsg(pDest)); rc = 1; } - sqlite3_close(pDest); + close_db(pDest); }else if( c=='b' && n>=3 && strncmp(azArg[0], "bail", n)==0 ){ @@ -5609,7 +13456,7 @@ utf8_printf(stderr, "testcase-%s FAILED\n Expected: [%s]\n Got: [%s]\n", p->zTestcase, azArg[1], zRes); - rc = 2; + rc = 1; }else{ utf8_printf(stdout, "testcase-%s ok\n", p->zTestcase); p->nCheck++; @@ -5644,7 +13491,39 @@ } }else - if( c=='d' && strncmp(azArg[0], "dbinfo", n)==0 ){ + if( c=='d' && n>=3 && strncmp(azArg[0], "dbconfig", n)==0 ){ + static const struct DbConfigChoices { + const char *zName; + int op; + } aDbConfig[] = { + { "enable_fkey", SQLITE_DBCONFIG_ENABLE_FKEY }, + { "enable_trigger", SQLITE_DBCONFIG_ENABLE_TRIGGER }, + { "fts3_tokenizer", SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER }, + { "load_extension", SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION }, + { "no_ckpt_on_close", SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE }, + { "enable_qpsg", SQLITE_DBCONFIG_ENABLE_QPSG }, + { "trigger_eqp", SQLITE_DBCONFIG_TRIGGER_EQP }, + { "reset_database", SQLITE_DBCONFIG_RESET_DATABASE }, + { "defensive", SQLITE_DBCONFIG_DEFENSIVE }, + }; + int ii, v; + open_db(p, 0); + for(ii=0; ii1 && strcmp(azArg[1], aDbConfig[ii].zName)!=0 ) continue; + if( nArg>=3 ){ + sqlite3_db_config(p->db, aDbConfig[ii].op, booleanValue(azArg[2]), 0); + } + sqlite3_db_config(p->db, aDbConfig[ii].op, -1, &v); + utf8_printf(p->out, "%18s %s\n", aDbConfig[ii].zName, v ? "on" : "off"); + if( nArg>1 ) break; + } + if( nArg>1 && ii==ArraySize(aDbConfig) ){ + utf8_printf(stderr, "Error: unknown dbconfig \"%s\"\n", azArg[1]); + utf8_printf(stderr, "Enter \".dbconfig\" with no arguments for a list\n"); + } + }else + + if( c=='d' && n>=3 && strncmp(azArg[0], "dbinfo", n)==0 ){ rc = shell_dbinfo_command(p, nArg, azArg); }else @@ -5652,7 +13531,8 @@ const char *zLike = 0; int i; int savedShowHeader = p->showHeader; - ShellClearFlag(p, SHFLG_PreserveRowid|SHFLG_Newlines); + int savedShellFlags = p->shellFlgs; + ShellClearFlag(p, SHFLG_PreserveRowid|SHFLG_Newlines|SHFLG_Echo); for(i=1; idb, "RELEASE dump;", 0, 0, 0); raw_printf(p->out, p->nErr ? "ROLLBACK; -- due to errors\n" : "COMMIT;\n"); p->showHeader = savedShowHeader; + p->shellFlgs = savedShellFlags; }else if( c=='e' && strncmp(azArg[0], "echo", n)==0 ){ @@ -5747,13 +13628,19 @@ if( c=='e' && strncmp(azArg[0], "eqp", n)==0 ){ if( nArg==2 ){ + p->autoEQPtest = 0; if( strcmp(azArg[1],"full")==0 ){ - p->autoEQP = 2; + p->autoEQP = AUTOEQP_full; + }else if( strcmp(azArg[1],"trigger")==0 ){ + p->autoEQP = AUTOEQP_trigger; + }else if( strcmp(azArg[1],"test")==0 ){ + p->autoEQP = AUTOEQP_on; + p->autoEQPtest = 1; }else{ - p->autoEQP = booleanValue(azArg[1]); + p->autoEQP = (u8)booleanValue(azArg[1]); } }else{ - raw_printf(stderr, "Usage: .eqp on|off|full\n"); + raw_printf(stderr, "Usage: .eqp off|on|trigger|full\n"); rc = 1; } }else @@ -5787,6 +13674,13 @@ } }else +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( c=='e' && strncmp(azArg[0], "expert", n)==0 ){ + open_db(p, 0); + expertDotCommand(p, azArg, nArg); + }else +#endif + if( c=='f' && strncmp(azArg[0], "fullschema", n)==0 ){ ShellState data; char *zErrMsg = 0; @@ -5830,14 +13724,11 @@ callback, &data, &zErrMsg); data.cMode = data.mode = MODE_Insert; data.zDestTable = "sqlite_stat1"; - shell_exec(p->db, "SELECT * FROM sqlite_stat1", - shell_callback, &data,&zErrMsg); + shell_exec(&data, "SELECT * FROM sqlite_stat1", &zErrMsg); data.zDestTable = "sqlite_stat3"; - shell_exec(p->db, "SELECT * FROM sqlite_stat3", - shell_callback, &data,&zErrMsg); + shell_exec(&data, "SELECT * FROM sqlite_stat3", &zErrMsg); data.zDestTable = "sqlite_stat4"; - shell_exec(p->db, "SELECT * FROM sqlite_stat4", - shell_callback, &data, &zErrMsg); + shell_exec(&data, "SELECT * FROM sqlite_stat4", &zErrMsg); raw_printf(p->out, "ANALYZE sqlite_master;\n"); } }else @@ -5852,7 +13743,14 @@ }else if( c=='h' && strncmp(azArg[0], "help", n)==0 ){ - utf8_printf(p->out, "%s", zHelp); + if( nArg>=2 ){ + n = showHelp(p->out, azArg[1]); + if( n==0 ){ + utf8_printf(p->out, "Nothing matches '%s'\n", azArg[1]); + } + }else{ + showHelp(p->out, 0); + } }else if( c=='i' && strncmp(azArg[0], "import", n)==0 ){ @@ -5935,9 +13833,8 @@ sCtx.cRowSep = p->rowSeparator[0]; zSql = sqlite3_mprintf("SELECT * FROM %s", zTable); if( zSql==0 ){ - raw_printf(stderr, "Error: out of memory\n"); xCloser(sCtx.in); - return 1; + shell_out_of_memory(); } nByte = strlen30(zSql); rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); @@ -5982,9 +13879,8 @@ if( nCol==0 ) return 0; /* no columns, no error */ zSql = sqlite3_malloc64( nByte*2 + 20 + nCol*2 ); if( zSql==0 ){ - raw_printf(stderr, "Error: out of memory\n"); xCloser(sCtx.in); - return 1; + shell_out_of_memory(); } sqlite3_snprintf(nByte+20, zSql, "INSERT INTO \"%w\" VALUES(?", zTable); j = strlen30(zSql); @@ -6060,12 +13956,17 @@ sqlite3_stmt *pStmt; int tnum = 0; int i; - if( nArg!=3 ){ - utf8_printf(stderr, "Usage: .imposter INDEX IMPOSTER\n"); + if( !(nArg==3 || (nArg==2 && sqlite3_stricmp(azArg[1],"off")==0)) ){ + utf8_printf(stderr, "Usage: .imposter INDEX IMPOSTER\n" + " .imposter off\n"); rc = 1; goto meta_command_exit; } open_db(p, 0); + if( nArg==2 ){ + sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, p->db, "main", 0, 1); + goto meta_command_exit; + } zSql = sqlite3_mprintf("SELECT rootpage FROM sqlite_master" " WHERE name='%q' AND type='index'", azArg[1]); sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); @@ -6241,13 +14142,13 @@ }else{ const char *zFile = azArg[1]; output_file_close(p->pLog); - p->pLog = output_file_open(zFile); + p->pLog = output_file_open(zFile, 0); } }else if( c=='m' && strncmp(azArg[0], "mode", n)==0 ){ const char *zMode = nArg>=2 ? azArg[1] : ""; - int n2 = (int)strlen(zMode); + int n2 = strlen30(zMode); int c2 = zMode[0]; if( c2=='l' && n2>2 && strncmp(azArg[1],"lines",n2)==0 ){ p->mode = MODE_Line; @@ -6307,16 +14208,29 @@ int newFlag = 0; /* True to delete file before opening */ /* Close the existing database */ session_close_all(p); - sqlite3_close(p->db); + close_db(p->db); p->db = 0; p->zDbFilename = 0; sqlite3_free(p->zFreeOnClose); p->zFreeOnClose = 0; + p->openMode = SHELL_OPEN_UNSPEC; /* Check for command-line arguments */ for(iName=1; iNameopenMode = SHELL_OPEN_ZIPFILE; +#endif + }else if( optionMatch(z, "append") ){ + p->openMode = SHELL_OPEN_APPENDVFS; + }else if( optionMatch(z, "readonly") ){ + p->openMode = SHELL_OPEN_READONLY; +#ifdef SQLITE_ENABLE_DESERIALIZE + }else if( optionMatch(z, "deserialize") ){ + p->openMode = SHELL_OPEN_DESERIALIZE; +#endif }else if( z[0]=='-' ){ utf8_printf(stderr, "unknown option: %s\n", z); rc = 1; @@ -6328,7 +14242,7 @@ if( zNewFilename ){ if( newFlag ) shellDeleteFile(zNewFilename); p->zDbFilename = zNewFilename; - open_db(p, 1); + open_db(p, OPEN_DB_KEEPALIVE); if( p->db==0 ){ utf8_printf(stderr, "Error: cannot open '%s'\n", zNewFilename); sqlite3_free(zNewFilename); @@ -6343,18 +14257,27 @@ } }else - if( c=='o' - && (strncmp(azArg[0], "output", n)==0 || strncmp(azArg[0], "once", n)==0) + if( (c=='o' + && (strncmp(azArg[0], "output", n)==0||strncmp(azArg[0], "once", n)==0)) + || (c=='e' && n==5 && strcmp(azArg[0],"excel")==0) ){ const char *zFile = nArg>=2 ? azArg[1] : "stdout"; + int bTxtMode = 0; + if( azArg[0][0]=='e' ){ + /* Transform the ".excel" command into ".once -x" */ + nArg = 2; + azArg[0] = "once"; + zFile = azArg[1] = "-x"; + n = 4; + } if( nArg>2 ){ - utf8_printf(stderr, "Usage: .%s FILE\n", azArg[0]); + utf8_printf(stderr, "Usage: .%s [-e|-x|FILE]\n", azArg[0]); rc = 1; goto meta_command_exit; } if( n>1 && strncmp(azArg[0], "once", n)==0 ){ if( nArg<2 ){ - raw_printf(stderr, "Usage: .once FILE\n"); + raw_printf(stderr, "Usage: .once (-e|-x|FILE)\n"); rc = 1; goto meta_command_exit; } @@ -6363,6 +14286,23 @@ p->outCount = 0; } output_reset(p); + if( zFile[0]=='-' && zFile[1]=='-' ) zFile++; +#ifndef SQLITE_NOHAVE_SYSTEM + if( strcmp(zFile, "-e")==0 || strcmp(zFile, "-x")==0 ){ + p->doXdgOpen = 1; + outputModePush(p); + if( zFile[1]=='x' ){ + newTempFile(p, "csv"); + p->mode = MODE_Csv; + sqlite3_snprintf(sizeof(p->colSeparator), p->colSeparator, SEP_Comma); + sqlite3_snprintf(sizeof(p->rowSeparator), p->rowSeparator, SEP_CrLf); + }else{ + newTempFile(p, "txt"); + bTxtMode = 1; + } + zFile = p->zTempFile; + } +#endif /* SQLITE_NOHAVE_SYSTEM */ if( zFile[0]=='|' ){ #ifdef SQLITE_OMIT_POPEN raw_printf(stderr, "Error: pipes are not supported in this OS\n"); @@ -6379,7 +14319,7 @@ } #endif }else{ - p->out = output_file_open(zFile); + p->out = output_file_open(zFile, bTxtMode); if( p->out==0 ){ if( strcmp(zFile,"off")!=0 ){ utf8_printf(stderr,"Error: cannot write to \"%s\"\n", zFile); @@ -6452,7 +14392,7 @@ rc = sqlite3_open(zSrcFile, &pSrc); if( rc!=SQLITE_OK ){ utf8_printf(stderr, "Error: cannot open \"%s\"\n", zSrcFile); - sqlite3_close(pSrc); + close_db(pSrc); return 1; } open_db(p, 0); @@ -6459,7 +14399,7 @@ pBackup = sqlite3_backup_init(p->db, zDb, pSrc, "main"); if( pBackup==0 ){ utf8_printf(stderr, "Error: %s\n", sqlite3_errmsg(p->db)); - sqlite3_close(pSrc); + close_db(pSrc); return 1; } while( (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK @@ -6479,13 +14419,12 @@ utf8_printf(stderr, "Error: %s\n", sqlite3_errmsg(p->db)); rc = 1; } - sqlite3_close(pSrc); + close_db(pSrc); }else - if( c=='s' && strncmp(azArg[0], "scanstats", n)==0 ){ if( nArg==2 ){ - p->scanstatsOn = booleanValue(azArg[1]); + p->scanstatsOn = (u8)booleanValue(azArg[1]); #ifndef SQLITE_ENABLE_STMT_SCANSTATUS raw_printf(stderr, "Warning: .scanstats not available in this build.\n"); #endif @@ -6499,8 +14438,11 @@ ShellText sSelect; ShellState data; char *zErrMsg = 0; - const char *zDiv = 0; + const char *zDiv = "("; + const char *zName = 0; int iSchema = 0; + int bDebug = 0; + int ii; open_db(p, 0); memcpy(&data, p, sizeof(data)); @@ -6507,51 +14449,37 @@ data.showHeader = 0; data.cMode = data.mode = MODE_Semi; initText(&sSelect); - if( nArg>=2 && optionMatch(azArg[1], "indent") ){ - data.cMode = data.mode = MODE_Pretty; - nArg--; - if( nArg==2 ) azArg[1] = azArg[2]; + for(ii=1; ii1 ){ - char *zQarg = sqlite3_mprintf("%Q", azArg[1]); - if( strchr(azArg[1], '.') ){ + if( zName ){ + char *zQarg = sqlite3_mprintf("%Q", zName); + int bGlob = strchr(zName, '*') != 0 || strchr(zName, '?') != 0 || + strchr(zName, '[') != 0; + if( strchr(zName, '.') ){ appendText(&sSelect, "lower(printf('%s.%s',sname,tbl_name))", 0); }else{ appendText(&sSelect, "lower(tbl_name)", 0); } - appendText(&sSelect, strchr(azArg[1], '*') ? " GLOB " : " LIKE ", 0); + appendText(&sSelect, bGlob ? " GLOB " : " LIKE ", 0); appendText(&sSelect, zQarg, 0); + if( !bGlob ){ + appendText(&sSelect, " ESCAPE '\\' ", 0); + } appendText(&sSelect, " AND ", 0); sqlite3_free(zQarg); } appendText(&sSelect, "type!='meta' AND sql IS NOT NULL" " ORDER BY snum, rowid", 0); - rc = sqlite3_exec(p->db, sSelect.z, callback, &data, &zErrMsg); + if( bDebug ){ + utf8_printf(p->out, "SQL: %s;\n", sSelect.z); + }else{ + rc = sqlite3_exec(p->db, sSelect.z, callback, &data, &zErrMsg); + } freeText(&sSelect); } if( zErrMsg ){ @@ -6816,7 +14758,7 @@ }else /* If no command name matches, show a syntax error */ session_syntax_error: - session_help(p); + showHelp(p->out, "session"); }else #endif @@ -6997,7 +14939,7 @@ utf8_printf(stderr, "Unknown option \"%s\" on \"%s\"\n", azArg[i], azArg[0]); raw_printf(stderr, "Should be one of: --schema" - " --sha3-224 --sha3-255 --sha3-384 --sha3-512\n"); + " --sha3-224 --sha3-256 --sha3-384 --sha3-512\n"); rc = 1; goto meta_command_exit; } @@ -7008,7 +14950,7 @@ }else{ zLike = z; bSeparate = 1; - if( sqlite3_strlike("sqlite_%", zLike, 0)==0 ) bSchema = 1; + if( sqlite3_strlike("sqlite\\_%", zLike, '\\')==0 ) bSchema = 1; } } if( bSchema ){ @@ -7075,11 +15017,12 @@ if( bDebug ){ utf8_printf(p->out, "%s\n", zSql); }else{ - shell_exec(p->db, zSql, shell_callback, p, 0); + shell_exec(p, zSql, 0); } sqlite3_free(zSql); }else +#ifndef SQLITE_NOHAVE_SYSTEM if( c=='s' && (strncmp(azArg[0], "shell", n)==0 || strncmp(azArg[0],"system",n)==0) ){ @@ -7099,9 +15042,10 @@ sqlite3_free(zCmd); if( x ) raw_printf(stderr, "System command returns %d\n", x); }else +#endif /* !defined(SQLITE_NOHAVE_SYSTEM) */ if( c=='s' && strncmp(azArg[0], "show", n)==0 ){ - static const char *azBool[] = { "off", "on", "full", "unk" }; + static const char *azBool[] = { "off", "on", "trigger", "full"}; int i; if( nArg!=1 ){ raw_printf(stderr, "Usage: .show\n"); @@ -7138,7 +15082,7 @@ if( c=='s' && strncmp(azArg[0], "stats", n)==0 ){ if( nArg==2 ){ - p->statsOn = booleanValue(azArg[1]); + p->statsOn = (u8)booleanValue(azArg[1]); }else if( nArg==1 ){ display_stats(p->db, p, 0); }else{ @@ -7159,7 +15103,10 @@ initText(&s); open_db(p, 0); rc = sqlite3_prepare_v2(p->db, "PRAGMA database_list", -1, &pStmt, 0); - if( rc ) return shellDatabaseError(p->db); + if( rc ){ + sqlite3_finalize(pStmt); + return shellDatabaseError(p->db); + } if( nArg>2 && c=='i' ){ /* It is an historical accident that the .indexes command shows an error @@ -7167,6 +15114,7 @@ ** command does not. */ raw_printf(stderr, "Usage: .indexes ?LIKE-PATTERN?\n"); rc = 1; + sqlite3_finalize(pStmt); goto meta_command_exit; } for(ii=0; sqlite3_step(pStmt)==SQLITE_ROW; ii++){ @@ -7211,18 +15159,12 @@ char **azNew; int n2 = nAlloc*2 + 10; azNew = sqlite3_realloc64(azResult, sizeof(azResult[0])*n2); - if( azNew==0 ){ - rc = shellNomemError(); - break; - } + if( azNew==0 ) shell_out_of_memory(); nAlloc = n2; azResult = azNew; } azResult[nRow] = sqlite3_mprintf("%s", sqlite3_column_text(pStmt, 0)); - if( 0==azResult[nRow] ){ - rc = shellNomemError(); - break; - } + if( 0==azResult[nRow] ) shell_out_of_memory(); nRow++; } if( sqlite3_finalize(pStmt)!=SQLITE_OK ){ @@ -7258,7 +15200,7 @@ /* Begin redirecting output to the file "testcase-out.txt" */ if( c=='t' && strcmp(azArg[0],"testcase")==0 ){ output_reset(p); - p->out = output_file_open("testcase-out.txt"); + p->out = output_file_open("testcase-out.txt", 0); if( p->out==0 ){ raw_printf(stderr, "Error: cannot open 'testcase-out.txt'\n"); } @@ -7270,50 +15212,78 @@ }else #ifndef SQLITE_UNTESTABLE - if( c=='t' && n>=8 && strncmp(azArg[0], "testctrl", n)==0 && nArg>=2 ){ + if( c=='t' && n>=8 && strncmp(azArg[0], "testctrl", n)==0 ){ static const struct { const char *zCtrlName; /* Name of a test-control option */ int ctrlCode; /* Integer code for that option */ + const char *zUsage; /* Usage notes */ } aCtrl[] = { - { "prng_save", SQLITE_TESTCTRL_PRNG_SAVE }, - { "prng_restore", SQLITE_TESTCTRL_PRNG_RESTORE }, - { "prng_reset", SQLITE_TESTCTRL_PRNG_RESET }, - { "bitvec_test", SQLITE_TESTCTRL_BITVEC_TEST }, - { "fault_install", SQLITE_TESTCTRL_FAULT_INSTALL }, - { "benign_malloc_hooks", SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS }, - { "pending_byte", SQLITE_TESTCTRL_PENDING_BYTE }, - { "assert", SQLITE_TESTCTRL_ASSERT }, - { "always", SQLITE_TESTCTRL_ALWAYS }, - { "reserve", SQLITE_TESTCTRL_RESERVE }, - { "optimizations", SQLITE_TESTCTRL_OPTIMIZATIONS }, - { "iskeyword", SQLITE_TESTCTRL_ISKEYWORD }, - { "scratchmalloc", SQLITE_TESTCTRL_SCRATCHMALLOC }, - { "byteorder", SQLITE_TESTCTRL_BYTEORDER }, - { "never_corrupt", SQLITE_TESTCTRL_NEVER_CORRUPT }, - { "imposter", SQLITE_TESTCTRL_IMPOSTER }, + { "always", SQLITE_TESTCTRL_ALWAYS, "BOOLEAN" }, + { "assert", SQLITE_TESTCTRL_ASSERT, "BOOLEAN" }, + /*{ "benign_malloc_hooks",SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS, "" },*/ + /*{ "bitvec_test", SQLITE_TESTCTRL_BITVEC_TEST, "" },*/ + { "byteorder", SQLITE_TESTCTRL_BYTEORDER, "" }, + /*{ "fault_install", SQLITE_TESTCTRL_FAULT_INSTALL, "" }, */ + { "imposter", SQLITE_TESTCTRL_IMPOSTER, "SCHEMA ON/OFF ROOTPAGE"}, + { "internal_functions", SQLITE_TESTCTRL_INTERNAL_FUNCTIONS, "BOOLEAN" }, + { "localtime_fault", SQLITE_TESTCTRL_LOCALTIME_FAULT,"BOOLEAN" }, + { "never_corrupt", SQLITE_TESTCTRL_NEVER_CORRUPT, "BOOLEAN" }, + { "optimizations", SQLITE_TESTCTRL_OPTIMIZATIONS, "DISABLE-MASK" }, +#ifdef YYCOVERAGE + { "parser_coverage", SQLITE_TESTCTRL_PARSER_COVERAGE, "" }, +#endif + { "pending_byte", SQLITE_TESTCTRL_PENDING_BYTE, "OFFSET " }, + { "prng_reset", SQLITE_TESTCTRL_PRNG_RESET, "" }, + { "prng_restore", SQLITE_TESTCTRL_PRNG_RESTORE, "" }, + { "prng_save", SQLITE_TESTCTRL_PRNG_SAVE, "" }, + { "reserve", SQLITE_TESTCTRL_RESERVE, "BYTES-OF-RESERVE" }, }; int testctrl = -1; - int rc2 = 0; + int iCtrl = -1; + int rc2 = 0; /* 0: usage. 1: %d 2: %x 3: no-output */ + int isOk = 0; int i, n2; + const char *zCmd = 0; + open_db(p, 0); + zCmd = nArg>=2 ? azArg[1] : "help"; + /* The argument can optionally begin with "-" or "--" */ + if( zCmd[0]=='-' && zCmd[1] ){ + zCmd++; + if( zCmd[0]=='-' && zCmd[1] ) zCmd++; + } + + /* --help lists all test-controls */ + if( strcmp(zCmd,"help")==0 ){ + utf8_printf(p->out, "Available test-controls:\n"); + for(i=0; iout, " .testctrl %s %s\n", + aCtrl[i].zCtrlName, aCtrl[i].zUsage); + } + rc = 1; + goto meta_command_exit; + } + /* convert testctrl text option to value. allow any unique prefix ** of the option name, or a numerical value. */ - n2 = strlen30(azArg[1]); + n2 = strlen30(zCmd); for(i=0; iSQLITE_TESTCTRL_LAST) ){ - utf8_printf(stderr,"Error: invalid testctrl option: %s\n", azArg[1]); + if( testctrl<0 ){ + utf8_printf(stderr,"Error: unknown test-control: %s\n" + "Use \".testctrl --help\" for help\n", zCmd); }else{ switch(testctrl){ @@ -7323,10 +15293,7 @@ if( nArg==3 ){ int opt = (int)strtol(azArg[2], 0, 0); rc2 = sqlite3_test_control(testctrl, p->db, opt); - raw_printf(p->out, "%d (0x%08x)\n", rc2, rc2); - } else { - utf8_printf(stderr,"Error: testctrl %s takes a single int option\n", - azArg[1]); + isOk = 3; } break; @@ -7337,10 +15304,7 @@ case SQLITE_TESTCTRL_BYTEORDER: if( nArg==2 ){ rc2 = sqlite3_test_control(testctrl); - raw_printf(p->out, "%d (0x%08x)\n", rc2, rc2); - } else { - utf8_printf(stderr,"Error: testctrl %s takes no options\n", - azArg[1]); + isOk = testctrl==SQLITE_TESTCTRL_BYTEORDER ? 1 : 3; } break; @@ -7349,10 +15313,7 @@ if( nArg==3 ){ unsigned int opt = (unsigned int)integerValue(azArg[2]); rc2 = sqlite3_test_control(testctrl, opt); - raw_printf(p->out, "%d (0x%08x)\n", rc2, rc2); - } else { - utf8_printf(stderr,"Error: testctrl %s takes a single unsigned" - " int option\n", azArg[1]); + isOk = 3; } break; @@ -7359,31 +15320,23 @@ /* sqlite3_test_control(int, int) */ case SQLITE_TESTCTRL_ASSERT: case SQLITE_TESTCTRL_ALWAYS: - case SQLITE_TESTCTRL_NEVER_CORRUPT: + case SQLITE_TESTCTRL_INTERNAL_FUNCTIONS: if( nArg==3 ){ int opt = booleanValue(azArg[2]); rc2 = sqlite3_test_control(testctrl, opt); - raw_printf(p->out, "%d (0x%08x)\n", rc2, rc2); - } else { - utf8_printf(stderr,"Error: testctrl %s takes a single int option\n", - azArg[1]); + isOk = 1; } break; - /* sqlite3_test_control(int, char *) */ -#ifdef SQLITE_N_KEYWORD - case SQLITE_TESTCTRL_ISKEYWORD: + /* sqlite3_test_control(int, int) */ + case SQLITE_TESTCTRL_LOCALTIME_FAULT: + case SQLITE_TESTCTRL_NEVER_CORRUPT: if( nArg==3 ){ - const char *opt = azArg[2]; + int opt = booleanValue(azArg[2]); rc2 = sqlite3_test_control(testctrl, opt); - raw_printf(p->out, "%d (0x%08x)\n", rc2, rc2); - } else { - utf8_printf(stderr, - "Error: testctrl %s takes a single char * option\n", - azArg[1]); + isOk = 3; } break; -#endif case SQLITE_TESTCTRL_IMPOSTER: if( nArg==5 ){ @@ -7391,23 +15344,27 @@ azArg[2], integerValue(azArg[3]), integerValue(azArg[4])); - raw_printf(p->out, "%d (0x%08x)\n", rc2, rc2); - }else{ - raw_printf(stderr,"Usage: .testctrl imposter dbName onoff tnum\n"); + isOk = 3; } break; - case SQLITE_TESTCTRL_BITVEC_TEST: - case SQLITE_TESTCTRL_FAULT_INSTALL: - case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: - case SQLITE_TESTCTRL_SCRATCHMALLOC: - default: - utf8_printf(stderr, - "Error: CLI support for testctrl %s not implemented\n", - azArg[1]); - break; +#ifdef YYCOVERAGE + case SQLITE_TESTCTRL_PARSER_COVERAGE: + if( nArg==2 ){ + sqlite3_test_control(testctrl, p->out); + isOk = 3; + } +#endif } } + if( isOk==0 && iCtrl>=0 ){ + utf8_printf(p->out, "Usage: .testctrl %s %s\n", zCmd, aCtrl[iCtrl].zUsage); + rc = 1; + }else if( isOk==1 ){ + raw_printf(p->out, "%d\n", rc2); + }else if( isOk==2 ){ + raw_printf(p->out, "0x%08x\n", rc2); + } }else #endif /* !defined(SQLITE_UNTESTABLE) */ @@ -7437,7 +15394,7 @@ goto meta_command_exit; } output_file_close(p->traceOut); - p->traceOut = output_file_open(azArg[1]); + p->traceOut = output_file_open(azArg[1], 0); #if !defined(SQLITE_OMIT_TRACE) && !defined(SQLITE_OMIT_FLOATING_POINT) if( p->traceOut==0 ){ sqlite3_trace_v2(p->db, 0, 0, 0); @@ -7461,8 +15418,7 @@ rc = 1; goto meta_command_exit; } - rc = sqlite3_user_authenticate(p->db, azArg[2], azArg[3], - (int)strlen(azArg[3])); + rc = sqlite3_user_authenticate(p->db, azArg[2], azArg[3], strlen30(azArg[3])); if( rc ){ utf8_printf(stderr, "Authentication failed for user %s\n", azArg[2]); rc = 1; @@ -7473,8 +15429,7 @@ rc = 1; goto meta_command_exit; } - rc = sqlite3_user_add(p->db, azArg[2], - azArg[3], (int)strlen(azArg[3]), + rc = sqlite3_user_add(p->db, azArg[2], azArg[3], strlen30(azArg[3]), booleanValue(azArg[4])); if( rc ){ raw_printf(stderr, "User-Add failed: %d\n", rc); @@ -7486,8 +15441,7 @@ rc = 1; goto meta_command_exit; } - rc = sqlite3_user_change(p->db, azArg[2], - azArg[3], (int)strlen(azArg[3]), + rc = sqlite3_user_change(p->db, azArg[2], azArg[3], strlen30(azArg[3]), booleanValue(azArg[4])); if( rc ){ raw_printf(stderr, "User-Edit failed: %d\n", rc); @@ -7515,6 +15469,20 @@ if( c=='v' && strncmp(azArg[0], "version", n)==0 ){ utf8_printf(p->out, "SQLite %s %s\n" /*extra-version-info*/, sqlite3_libversion(), sqlite3_sourceid()); +#if SQLITE_HAVE_ZLIB + utf8_printf(p->out, "zlib version %s\n", zlibVersion()); +#endif +#define CTIMEOPT_VAL_(opt) #opt +#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt) +#if defined(__clang__) && defined(__clang_major__) + utf8_printf(p->out, "clang-" CTIMEOPT_VAL(__clang_major__) "." + CTIMEOPT_VAL(__clang_minor__) "." + CTIMEOPT_VAL(__clang_patchlevel__) "\n"); +#elif defined(_MSC_VER) + utf8_printf(p->out, "msvc-" CTIMEOPT_VAL(_MSC_VER) "\n"); +#elif defined(__GNUC__) && defined(__VERSION__) + utf8_printf(p->out, "gcc-" __VERSION__ "\n"); +#endif }else if( c=='v' && strncmp(azArg[0], "vfsinfo", n)==0 ){ @@ -7641,6 +15609,16 @@ } /* +** We need a default sqlite3_complete() implementation to use in case +** the shell is compiled with SQLITE_OMIT_COMPLETE. The default assumes +** any arbitrary text is a complete SQL statement. This is not very +** user-friendly, but it does seem to work. +*/ +#ifdef SQLITE_OMIT_COMPLETE +#define sqlite3_complete(x) 1 +#endif + +/* ** Return true if zSql is a complete SQL statement. Return false if it ** ends in the middle of a string literal or C-style comment. */ @@ -7655,7 +15633,7 @@ } /* -** Run a single line of SQL +** Run a single line of SQL. Return the number of errors. */ static int runOneSqlLine(ShellState *p, char *zSql, FILE *in, int startline){ int rc; @@ -7664,7 +15642,7 @@ open_db(p, 0); if( ShellHasFlag(p,SHFLG_Backslash) ) resolve_backslashes(zSql); BEGIN_TIMER; - rc = shell_exec(p->db, zSql, shell_callback, p, &zErrMsg); + rc = shell_exec(p, zSql, &zErrMsg); END_TIMER; if( rc || zErrMsg ){ char zPrefix[100]; @@ -7728,13 +15706,15 @@ if( ShellHasFlag(p, SHFLG_Echo) ) printf("%s\n", zLine); continue; } - if( zLine && zLine[0]=='.' && nSql==0 ){ + if( zLine && (zLine[0]=='.' || zLine[0]=='#') && nSql==0 ){ if( ShellHasFlag(p, SHFLG_Echo) ) printf("%s\n", zLine); - rc = do_meta_command(zLine, p); - if( rc==2 ){ /* exit requested */ - break; - }else if( rc ){ - errCnt++; + if( zLine[0]=='.' ){ + rc = do_meta_command(zLine, p); + if( rc==2 ){ /* exit requested */ + break; + }else if( rc ){ + errCnt++; + } } continue; } @@ -7745,10 +15725,7 @@ if( nSql+nLine+2>=nAlloc ){ nAlloc = nSql+nLine+100; zSql = realloc(zSql, nAlloc); - if( zSql==0 ){ - raw_printf(stderr, "Error: out of memory\n"); - exit(1); - } + if( zSql==0 ) shell_out_of_memory(); } nSqlPrior = nSql; if( nSql==0 ){ @@ -7770,6 +15747,8 @@ if( p->outCount ){ output_reset(p); p->outCount = 0; + }else{ + clearTempFile(p); } }else if( nSql && _all_whitespace(zSql) ){ if( ShellHasFlag(p, SHFLG_Echo) ) printf("%s\n", zSql); @@ -7777,7 +15756,7 @@ } } if( nSql && !_all_whitespace(zSql) ){ - runOneSqlLine(p, zSql, in, startline); + errCnt += runOneSqlLine(p, zSql, in, startline); } free(zSql); free(zLine); @@ -7875,7 +15854,6 @@ " cannot read ~/.sqliterc\n"); return; } - sqlite3_initialize(); zBuf = sqlite3_mprintf("%s/.sqliterc",home_dir); sqliterc = zBuf; } @@ -7894,6 +15872,10 @@ ** Show available command line options */ static const char zOptions[] = +#if defined(SQLITE_HAVE_ZLIB) && !defined(SQLITE_OMIT_VIRTUALTABLE) + " -A ARGS... run \".archive ARGS\" and exit\n" +#endif + " -append append the database to the end of the file\n" " -ascii set output mode to 'ascii'\n" " -bail stop after hitting an error\n" " -batch force batch I/O\n" @@ -7920,8 +15902,11 @@ " -nullvalue TEXT set text string for NULL values. Default ''\n" " -pagecache SIZE N use N slots of SZ bytes each for page cache memory\n" " -quote set output mode to 'quote'\n" - " -scratch SIZE N use N slots of SZ bytes each for scratch memory\n" + " -readonly open the database read-only\n" " -separator SEP set output column separator. Default: '|'\n" +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + " -sorterref SIZE sorter references threshold size\n" +#endif " -stats print memory stats before each finalize\n" " -version show SQLite version\n" " -vfs NAME use NAME as the default VFS\n" @@ -7928,6 +15913,9 @@ #ifdef SQLITE_ENABLE_VFSTRACE " -vfstrace enable tracing of all VFS calls\n" #endif +#ifdef SQLITE_HAVE_ZLIB + " -zip open the file as a ZIP Archive\n" +#endif ; static void usage(int showDetail){ utf8_printf(stderr, @@ -7943,6 +15931,17 @@ } /* +** Internal check: Verify that the SQLite is uninitialized. Print a +** error message if it is initialized. +*/ +static void verify_uninitialized(void){ + if( sqlite3_config(-1)==SQLITE_MISUSE ){ + utf8_printf(stdout, "WARNING: attempt to configure SQLite after" + " initialization.\n"); + } +} + +/* ** Initialize the state information in data */ static void main_init(ShellState *data) { @@ -7953,6 +15952,7 @@ memcpy(data->rowSeparator,SEP_Row, 2); data->showHeader = 0; data->shellFlgs = SHFLG_Lookaside; + verify_uninitialized(); sqlite3_config(SQLITE_CONFIG_URI, 1); sqlite3_config(SQLITE_CONFIG_LOG, shellLog, data); sqlite3_config(SQLITE_CONFIG_MULTITHREAD); @@ -8016,6 +16016,11 @@ int readStdin = 1; int nCmd = 0; char **azCmd = 0; + const char *zVfs = 0; /* Value of -vfs command-line option */ +#if !SQLITE_SHELL_IS_UTF8 + char **argvToFree = 0; + int argcToFree = 0; +#endif setBinaryMode(stdin, 0); setvbuf(stderr, 0, _IONBF, 0); /* Make sure stderr is unbuffered */ @@ -8022,8 +16027,25 @@ stdin_is_interactive = isatty(0); stdout_is_console = isatty(1); +#if !defined(_WIN32_WCE) + if( getenv("SQLITE_DEBUG_BREAK") ){ + if( isatty(0) && isatty(2) ){ + fprintf(stderr, + "attach debugger to process %d and press any key to continue.\n", + GETPID()); + fgetc(stdin); + }else{ +#if defined(_WIN32) || defined(WIN32) + DebugBreak(); +#elif defined(SIGTRAP) + raise(SIGTRAP); +#endif + } + } +#endif + #if USE_SYSTEM_SQLITE+0!=1 - if( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)!=0 ){ + if( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,60)!=0 ){ utf8_printf(stderr, "SQLite header and source version mismatch\n%s\n%s\n", sqlite3_sourceid(), SQLITE_SOURCE_ID); exit(1); @@ -8030,21 +16052,33 @@ } #endif main_init(&data); + + /* On Windows, we must translate command-line arguments into UTF-8. + ** The SQLite memory allocator subsystem has to be enabled in order to + ** do this. But we want to run an sqlite3_shutdown() afterwards so that + ** subsequent sqlite3_config() calls will work. So copy all results into + ** memory that does not come from the SQLite memory allocator. + */ #if !SQLITE_SHELL_IS_UTF8 sqlite3_initialize(); - argv = sqlite3_malloc64(sizeof(argv[0])*argc); - if( argv==0 ){ - raw_printf(stderr, "out of memory\n"); - exit(1); - } + argvToFree = malloc(sizeof(argv[0])*argc*2); + argcToFree = argc; + argv = argvToFree + argc; + if( argv==0 ) shell_out_of_memory(); for(i=0; i=1 && argv && argv[0] ); Argv0 = argv[0]; @@ -8053,6 +16087,8 @@ */ #ifdef SIGINT signal(SIGINT, interrupt_handler); +#elif (defined(_WIN32) || defined(WIN32)) && !defined(_WIN32_WCE) + SetConsoleCtrlHandler(ConsoleCtrlHandler, TRUE); #endif #ifdef SQLITE_SHELL_DBNAME_PROC @@ -8072,6 +16108,7 @@ ** the size of the alternative malloc heap, ** and the first command to execute. */ + verify_uninitialized(); for(i=1; i400000 ) sz = 400000; - if( sz<2500 ) sz = 2500; - n = (int)integerValue(cmdline_option_value(argc,argv,++i)); - if( n>10 ) n = 10; - if( n<1 ) n = 1; - sqlite3_config(SQLITE_CONFIG_SCRATCH, malloc(n*sz+1), sz, n); - data.shellFlgs |= SHFLG_Scratch; }else if( strcmp(z,"-pagecache")==0 ){ int n, sz; sz = (int)integerValue(cmdline_option_value(argc,argv,++i)); @@ -8164,16 +16188,61 @@ }else if( strcmp(z,"-mmap")==0 ){ sqlite3_int64 sz = integerValue(cmdline_option_value(argc,argv,++i)); sqlite3_config(SQLITE_CONFIG_MMAP_SIZE, sz, sz); +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + }else if( strcmp(z,"-sorterref")==0 ){ + sqlite3_int64 sz = integerValue(cmdline_option_value(argc,argv,++i)); + sqlite3_config(SQLITE_CONFIG_SORTERREF_SIZE, (int)sz); +#endif }else if( strcmp(z,"-vfs")==0 ){ - sqlite3_vfs *pVfs = sqlite3_vfs_find(cmdline_option_value(argc,argv,++i)); - if( pVfs ){ - sqlite3_vfs_register(pVfs, 1); - }else{ - utf8_printf(stderr, "no such VFS: \"%s\"\n", argv[i]); - exit(1); - } + zVfs = cmdline_option_value(argc, argv, ++i); +#ifdef SQLITE_HAVE_ZLIB + }else if( strcmp(z,"-zip")==0 ){ + data.openMode = SHELL_OPEN_ZIPFILE; +#endif + }else if( strcmp(z,"-append")==0 ){ + data.openMode = SHELL_OPEN_APPENDVFS; +#ifdef SQLITE_ENABLE_DESERIALIZE + }else if( strcmp(z,"-deserialize")==0 ){ + data.openMode = SHELL_OPEN_DESERIALIZE; +#endif + }else if( strcmp(z,"-readonly")==0 ){ + data.openMode = SHELL_OPEN_READONLY; +#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB) + }else if( strncmp(z, "-A",2)==0 ){ + /* All remaining command-line arguments are passed to the ".archive" + ** command, so ignore them */ + break; +#endif } } + verify_uninitialized(); + + +#ifdef SQLITE_SHELL_INIT_PROC + { + /* If the SQLITE_SHELL_INIT_PROC macro is defined, then it is the name + ** of a C-function that will perform initialization actions on SQLite that + ** occur just before or after sqlite3_initialize(). Use this compile-time + ** option to embed this shell program in larger applications. */ + extern void SQLITE_SHELL_INIT_PROC(void); + SQLITE_SHELL_INIT_PROC(); + } +#else + /* All the sqlite3_config() calls have now been made. So it is safe + ** to call sqlite3_initialize() and process any command line -vfs option. */ + sqlite3_initialize(); +#endif + + if( zVfs ){ + sqlite3_vfs *pVfs = sqlite3_vfs_find(zVfs); + if( pVfs ){ + sqlite3_vfs_register(pVfs, 1); + }else{ + utf8_printf(stderr, "no such VFS: \"%s\"\n", argv[i]); + exit(1); + } + } + if( data.zDbFilename==0 ){ #ifndef SQLITE_OMIT_MEMORYDB data.zDbFilename = ":memory:"; @@ -8184,6 +16253,7 @@ #endif } data.out = stdout; + sqlite3_appendvfs_init(0,0,0); /* Go ahead and open the database file if it already exists. If the ** file does not exist, delay opening it. This prevents empty database @@ -8224,6 +16294,18 @@ }else if( strcmp(z,"-csv")==0 ){ data.mode = MODE_Csv; memcpy(data.colSeparator,",",2); +#ifdef SQLITE_HAVE_ZLIB + }else if( strcmp(z,"-zip")==0 ){ + data.openMode = SHELL_OPEN_ZIPFILE; +#endif + }else if( strcmp(z,"-append")==0 ){ + data.openMode = SHELL_OPEN_APPENDVFS; +#ifdef SQLITE_ENABLE_DESERIALIZE + }else if( strcmp(z,"-deserialize")==0 ){ + data.openMode = SHELL_OPEN_DESERIALIZE; +#endif + }else if( strcmp(z,"-readonly")==0 ){ + data.openMode = SHELL_OPEN_READONLY; }else if( strcmp(z,"-ascii")==0 ){ data.mode = MODE_Ascii; sqlite3_snprintf(sizeof(data.colSeparator), data.colSeparator, @@ -8246,9 +16328,9 @@ }else if( strcmp(z,"-echo")==0 ){ ShellSetFlag(&data, SHFLG_Echo); }else if( strcmp(z,"-eqp")==0 ){ - data.autoEQP = 1; + data.autoEQP = AUTOEQP_on; }else if( strcmp(z,"-eqpfull")==0 ){ - data.autoEQP = 2; + data.autoEQP = AUTOEQP_full; }else if( strcmp(z,"-stats")==0 ){ data.statsOn = 1; }else if( strcmp(z,"-scanstats")==0 ){ @@ -8271,8 +16353,6 @@ stdin_is_interactive = 0; }else if( strcmp(z,"-heap")==0 ){ i++; - }else if( strcmp(z,"-scratch")==0 ){ - i+=2; }else if( strcmp(z,"-pagecache")==0 ){ i+=2; }else if( strcmp(z,"-lookaside")==0 ){ @@ -8279,6 +16359,10 @@ i+=2; }else if( strcmp(z,"-mmap")==0 ){ i++; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + }else if( strcmp(z,"-sorterref")==0 ){ + i++; +#endif }else if( strcmp(z,"-vfs")==0 ){ i++; #ifdef SQLITE_ENABLE_VFSTRACE @@ -8303,7 +16387,7 @@ if( rc && bail_on_error ) return rc==2 ? 0 : rc; }else{ open_db(&data, 0); - rc = shell_exec(data.db, z, shell_callback, &data, &zErrMsg); + rc = shell_exec(&data, z, &zErrMsg); if( zErrMsg!=0 ){ utf8_printf(stderr,"Error: %s\n", zErrMsg); if( bail_on_error ) return rc!=0 ? rc : 1; @@ -8312,6 +16396,23 @@ if( bail_on_error ) return rc; } } +#if !defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_HAVE_ZLIB) + }else if( strncmp(z, "-A", 2)==0 ){ + if( nCmd>0 ){ + utf8_printf(stderr, "Error: cannot mix regular SQL or dot-commands" + " with \"%s\"\n", z); + return 1; + } + open_db(&data, OPEN_DB_ZIPFILE); + if( z[2] ){ + argv[i] = &z[2]; + arDotCommand(&data, 1, argv+(i-1), argc-(i-1)); + }else{ + arDotCommand(&data, 1, argv+i, argc-i); + } + readStdin = 0; + break; +#endif }else{ utf8_printf(stderr,"%s: Error: unknown option: %s\n", Argv0, z); raw_printf(stderr,"Use -help for a list of options.\n"); @@ -8331,7 +16432,7 @@ if( rc ) return rc==2 ? 0 : rc; }else{ open_db(&data, 0); - rc = shell_exec(data.db, azCmd[i], shell_callback, &data, &zErrMsg); + rc = shell_exec(&data, azCmd[i], &zErrMsg); if( zErrMsg!=0 ){ utf8_printf(stderr,"Error: %s\n", zErrMsg); return rc!=0 ? rc : 1; @@ -8347,7 +16448,7 @@ */ if( stdin_is_interactive ){ char *zHome; - char *zHistory = 0; + char *zHistory; int nHistory; printf( "SQLite version %s %.19s\n" /*extra-version-info*/ @@ -8360,8 +16461,10 @@ printf(".\nUse \".open FILENAME\" to reopen on a " "persistent database.\n"); } - zHome = find_home_dir(0); - if( zHome ){ + zHistory = getenv("SQLITE_HISTORY"); + if( zHistory ){ + zHistory = strdup(zHistory); + }else if( (zHome = find_home_dir(0))!=0 ){ nHistory = strlen30(zHome) + 20; if( (zHistory = malloc(nHistory))!=0 ){ sqlite3_snprintf(nHistory, zHistory,"%s/.sqlite_history", zHome); @@ -8386,13 +16489,19 @@ set_table_name(&data, 0); if( data.db ){ session_close_all(&data); - sqlite3_close(data.db); + close_db(data.db); } sqlite3_free(data.zFreeOnClose); find_home_dir(1); + output_reset(&data); + data.doXdgOpen = 0; + clearTempFile(&data); #if !SQLITE_SHELL_IS_UTF8 - for(i=0; i=1400 -# define _CRT_RAND_S -#endif - -/* ** Include the header file used to customize the compiler options for MSVC. ** This should be done first so that it can successfully prevent spurious ** compiler warnings due to subsequent content in this file and other files @@ -1144,15 +1154,17 @@ ** a string which identifies a particular check-in of SQLite ** within its configuration management system. ^The SQLITE_SOURCE_ID ** string contains the date and time of the check-in (UTC) and a SHA1 -** or SHA3-256 hash of the entire source tree. +** or SHA3-256 hash of the entire source tree. If the source code has +** been edited in any way since it was last checked in, then the last +** four hexadecimal digits of the hash may be modified. ** ** See also: [sqlite3_libversion()], ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.20.0" -#define SQLITE_VERSION_NUMBER 3020000 -#define SQLITE_SOURCE_ID "2017-08-01 13:24:15 9501e22dfeebdcefa783575e47c60b514d7c2e0cad73b2a496c0bc4b680900a8" +#define SQLITE_VERSION "3.26.0" +#define SQLITE_VERSION_NUMBER 3026000 +#define SQLITE_SOURCE_ID "2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238b4f9" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -1168,7 +1180,7 @@ ** ** 
 ** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
-** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
+** assert( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,80)==0 );
 ** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
 **
)^ ** @@ -1178,9 +1190,11 @@ ** function is provided for use in DLLs since DLL users usually do not have ** direct access to string constants within the DLL. ^The ** sqlite3_libversion_number() function returns an integer equal to -** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns +** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns ** a pointer to a string constant whose value is the same as the -** [SQLITE_SOURCE_ID] C preprocessor macro. +** [SQLITE_SOURCE_ID] C preprocessor macro. Except if SQLite is built +** using an edited copy of [the amalgamation], then the last four characters +** of the hash might be different from [SQLITE_SOURCE_ID].)^ ** ** See also: [sqlite_version()] and [sqlite_source_id()]. */ @@ -1461,7 +1475,7 @@ #define SQLITE_FULL 13 /* Insertion failed because database is full */ #define SQLITE_CANTOPEN 14 /* Unable to open the database file */ #define SQLITE_PROTOCOL 15 /* Database lock protocol error */ -#define SQLITE_EMPTY 16 /* Not used */ +#define SQLITE_EMPTY 16 /* Internal use only */ #define SQLITE_SCHEMA 17 /* The database schema changed */ #define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */ #define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */ @@ -1495,6 +1509,9 @@ ** the most recent error can be obtained using ** [sqlite3_extended_errcode()]. */ +#define SQLITE_ERROR_MISSING_COLLSEQ (SQLITE_ERROR | (1<<8)) +#define SQLITE_ERROR_RETRY (SQLITE_ERROR | (2<<8)) +#define SQLITE_ERROR_SNAPSHOT (SQLITE_ERROR | (3<<8)) #define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) #define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) #define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8)) @@ -1523,7 +1540,11 @@ #define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8)) #define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8)) #define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8)) +#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8)) +#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8)) +#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8)) #define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8)) +#define SQLITE_LOCKED_VTAB (SQLITE_LOCKED | (2<<8)) #define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8)) #define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8)) #define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8)) @@ -1530,11 +1551,15 @@ #define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8)) #define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8)) #define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8)) +#define SQLITE_CANTOPEN_DIRTYWAL (SQLITE_CANTOPEN | (5<<8)) /* Not Used */ #define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8)) +#define SQLITE_CORRUPT_SEQUENCE (SQLITE_CORRUPT | (2<<8)) #define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8)) #define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8)) #define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8)) #define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8)) +#define SQLITE_READONLY_CANTINIT (SQLITE_READONLY | (5<<8)) +#define SQLITE_READONLY_DIRECTORY (SQLITE_READONLY | (6<<8)) #define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8)) #define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8)) #define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8)) @@ -1609,6 +1634,11 @@ ** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on ** read-only media and cannot be changed even by processes with ** elevated privileges. +** +** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying +** filesystem supports doing multiple write operations atomically when those +** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and +** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. */ #define SQLITE_IOCAP_ATOMIC 0x00000001 #define SQLITE_IOCAP_ATOMIC512 0x00000002 @@ -1624,6 +1654,7 @@ #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800 #define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000 #define SQLITE_IOCAP_IMMUTABLE 0x00002000 +#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000 /* ** CAPI3REF: File Locking Levels @@ -1758,6 +1789,7 @@ **
  • [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN] **
  • [SQLITE_IOCAP_POWERSAFE_OVERWRITE] **
  • [SQLITE_IOCAP_IMMUTABLE] +**
  • [SQLITE_IOCAP_BATCH_ATOMIC] ** ** ** The SQLITE_IOCAP_ATOMIC property means that all writes of @@ -1895,7 +1927,8 @@ **
  • [[SQLITE_FCNTL_PERSIST_WAL]] ** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the ** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary -** write ahead log and shared memory files used for transaction control +** write ahead log ([WAL file]) and shared memory +** files used for transaction control ** are automatically deleted when the latest connection to the database ** closes. Setting persistent WAL mode causes those files to persist after ** close. Persisting the files is useful when other processes that do not @@ -2041,6 +2074,66 @@ ** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by ** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for ** this opcode. +** +**
  • [[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]] +** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then +** the file descriptor is placed in "batch write mode", which +** means all subsequent write operations will be deferred and done +** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems +** that do not support batch atomic writes will return SQLITE_NOTFOUND. +** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to +** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or +** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make +** no VFS interface calls on the same [sqlite3_file] file descriptor +** except for calls to the xWrite method and the xFileControl method +** with [SQLITE_FCNTL_SIZE_HINT]. +** +**
  • [[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]] +** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write +** operations since the previous successful call to +** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically. +** This file control returns [SQLITE_OK] if and only if the writes were +** all performed successfully and have been committed to persistent storage. +** ^Regardless of whether or not it is successful, this file control takes +** the file descriptor out of batch write mode so that all subsequent +** write operations are independent. +** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without +** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. +** +**
  • [[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]] +** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write +** operations since the previous successful call to +** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back. +** ^This file control takes the file descriptor out of batch write mode +** so that all subsequent write operations are independent. +** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without +** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. +** +**
  • [[SQLITE_FCNTL_LOCK_TIMEOUT]] +** The [SQLITE_FCNTL_LOCK_TIMEOUT] opcode causes attempts to obtain +** a file lock using the xLock or xShmLock methods of the VFS to wait +** for up to M milliseconds before failing, where M is the single +** unsigned integer parameter. +** +**
  • [[SQLITE_FCNTL_DATA_VERSION]] +** The [SQLITE_FCNTL_DATA_VERSION] opcode is used to detect changes to +** a database file. The argument is a pointer to a 32-bit unsigned integer. +** The "data version" for the pager is written into the pointer. The +** "data version" changes whenever any change occurs to the corresponding +** database file, either through SQL statements on the same database +** connection or through transactions committed by separate database +** connections possibly in other processes. The [sqlite3_total_changes()] +** interface can be used to find if any database on the connection has changed, +** but that interface responds to changes on TEMP as well as MAIN and does +** not provide a mechanism to detect changes to MAIN only. Also, the +** [sqlite3_total_changes()] interface responds to internal changes only and +** omits changes made by other database connections. The +** [PRAGMA data_version] command provide a mechanism to detect changes to +** a single attached database that occur due to other database connections, +** but omits changes implemented by the database connection on which it is +** called. This file control is the only mechanism to detect changes that +** happen either internally or externally and that are associated with +** a particular attached database. ** */ #define SQLITE_FCNTL_LOCKSTATE 1 @@ -2072,6 +2165,11 @@ #define SQLITE_FCNTL_JOURNAL_POINTER 28 #define SQLITE_FCNTL_WIN32_GET_HANDLE 29 #define SQLITE_FCNTL_PDB 30 +#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31 +#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32 +#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33 +#define SQLITE_FCNTL_LOCK_TIMEOUT 34 +#define SQLITE_FCNTL_DATA_VERSION 35 /* deprecated names */ #define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE @@ -2109,12 +2207,18 @@ ** in the name of the object stands for "virtual file system". See ** the [VFS | VFS documentation] for further information. ** -** The value of the iVersion field is initially 1 but may be larger in -** future versions of SQLite. Additional fields may be appended to this -** object when the iVersion value is increased. Note that the structure -** of the sqlite3_vfs object changes in the transaction between -** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not -** modified. +** The VFS interface is sometimes extended by adding new methods onto +** the end. Each time such an extension occurs, the iVersion field +** is incremented. The iVersion value started out as 1 in +** SQLite [version 3.5.0] on [dateof:3.5.0], then increased to 2 +** with SQLite [version 3.7.0] on [dateof:3.7.0], and then increased +** to 3 with SQLite [version 3.7.6] on [dateof:3.7.6]. Additional fields +** may be appended to the sqlite3_vfs object and the iVersion value +** may increase again in future versions of SQLite. +** Note that the structure +** of the sqlite3_vfs object changes in the transition from +** SQLite [version 3.5.9] to [version 3.6.0] on [dateof:3.6.0] +** and yet the iVersion field was not modified. ** ** The szOsFile field is the size of the subclassed [sqlite3_file] ** structure used by this VFS. mxPathname is the maximum length of @@ -2642,6 +2746,16 @@ ** routines with a wrapper that simulations memory allocation failure or ** tracks memory usage, for example. ** +** [[SQLITE_CONFIG_SMALL_MALLOC]]
    SQLITE_CONFIG_SMALL_MALLOC
    +**
    ^The SQLITE_CONFIG_SMALL_MALLOC option takes single argument of +** type int, interpreted as a boolean, which if true provides a hint to +** SQLite that it should avoid large memory allocations if possible. +** SQLite will run faster if it is free to make large memory allocations, +** but some application might prefer to run slower in exchange for +** guarantees about memory fragmentation that are possible if large +** allocations are avoided. This hint is normally off. +**
    +** ** [[SQLITE_CONFIG_MEMSTATUS]]
    SQLITE_CONFIG_MEMSTATUS
    **
    ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int, ** interpreted as a boolean, which enables or disables the collection of @@ -2659,25 +2773,7 @@ **
    ** ** [[SQLITE_CONFIG_SCRATCH]]
    SQLITE_CONFIG_SCRATCH
    -**
    ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer -** that SQLite can use for scratch memory. ^(There are three arguments -** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte -** aligned memory buffer from which the scratch allocations will be -** drawn, the size of each scratch allocation (sz), -** and the maximum number of scratch allocations (N).)^ -** The first argument must be a pointer to an 8-byte aligned buffer -** of at least sz*N bytes of memory. -** ^SQLite will not use more than one scratch buffers per thread. -** ^SQLite will never request a scratch buffer that is more than 6 -** times the database page size. -** ^If SQLite needs needs additional -** scratch memory beyond what is provided by this configuration option, then -** [sqlite3_malloc()] will be used to obtain the memory needed.

    -** ^When the application provides any amount of scratch memory using -** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large -** [sqlite3_malloc|heap allocations]. -** This can help [Robson proof|prevent memory allocation failures] due to heap -** fragmentation in low-memory embedded systems. +**

    The SQLITE_CONFIG_SCRATCH option is no longer used. **
    ** ** [[SQLITE_CONFIG_PAGECACHE]]
    SQLITE_CONFIG_PAGECACHE
    @@ -2713,8 +2809,7 @@ ** [[SQLITE_CONFIG_HEAP]]
    SQLITE_CONFIG_HEAP
    **
    ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer ** that SQLite will use for all of its dynamic memory allocation needs -** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and -** [SQLITE_CONFIG_PAGECACHE]. +** beyond those provided for by [SQLITE_CONFIG_PAGECACHE]. ** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled ** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns ** [SQLITE_ERROR] if invoked otherwise. @@ -2900,6 +2995,22 @@ ** I/O required to support statement rollback. ** The default value for this setting is controlled by the ** [SQLITE_STMTJRNL_SPILL] compile-time option. +** +** [[SQLITE_CONFIG_SORTERREF_SIZE]] +**
    SQLITE_CONFIG_SORTERREF_SIZE +**
    The SQLITE_CONFIG_SORTERREF_SIZE option accepts a single parameter +** of type (int) - the new value of the sorter-reference size threshold. +** Usually, when SQLite uses an external sort to order records according +** to an ORDER BY clause, all fields required by the caller are present in the +** sorted records. However, if SQLite determines based on the declared type +** of a table column that its values are likely to be very large - larger +** than the configured sorter-reference size threshold - then a reference +** is stored in each sorted record and the required column values loaded +** from the database as records are returned in sorted order. The default +** value for this option is to never use this optimization. Specifying a +** negative value for this option restores the default behaviour. +** This option is only available if SQLite is compiled with the +** [SQLITE_ENABLE_SORTER_REFERENCES] compile-time option. ** */ #define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ @@ -2907,7 +3018,7 @@ #define SQLITE_CONFIG_SERIALIZED 3 /* nil */ #define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */ #define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */ +#define SQLITE_CONFIG_SCRATCH 6 /* No longer used */ #define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */ #define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */ #define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */ @@ -2928,6 +3039,8 @@ #define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */ #define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */ #define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */ +#define SQLITE_CONFIG_SMALL_MALLOC 27 /* boolean */ +#define SQLITE_CONFIG_SORTERREF_SIZE 28 /* int nByte */ /* ** CAPI3REF: Database Connection Configuration Options @@ -2943,6 +3056,7 @@ ** is invoked. ** **
    +** [[SQLITE_DBCONFIG_LOOKASIDE]] **
    SQLITE_DBCONFIG_LOOKASIDE
    **
    ^This option takes three additional arguments that determine the ** [lookaside memory allocator] configuration for the [database connection]. @@ -2965,6 +3079,7 @@ ** memory is in use leaves the configuration unchanged and returns ** [SQLITE_BUSY].)^
    ** +** [[SQLITE_DBCONFIG_ENABLE_FKEY]] **
    SQLITE_DBCONFIG_ENABLE_FKEY
    **
    ^This option is used to enable or disable the enforcement of ** [foreign key constraints]. There should be two additional arguments. @@ -2975,6 +3090,7 @@ ** following this call. The second parameter may be a NULL pointer, in ** which case the FK enforcement setting is not reported back.
    ** +** [[SQLITE_DBCONFIG_ENABLE_TRIGGER]] **
    SQLITE_DBCONFIG_ENABLE_TRIGGER
    **
    ^This option is used to enable or disable [CREATE TRIGGER | triggers]. ** There should be two additional arguments. @@ -2985,6 +3101,7 @@ ** following this call. The second parameter may be a NULL pointer, in ** which case the trigger setting is not reported back.
    ** +** [[SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER]] **
    SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER
    **
    ^This option is used to enable or disable the two-argument ** version of the [fts3_tokenizer()] function which is part of the @@ -2998,6 +3115,7 @@ ** following this call. The second parameter may be a NULL pointer, in ** which case the new setting is not reported back.
    ** +** [[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION]] **
    SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION
    **
    ^This option is used to enable or disable the [sqlite3_load_extension()] ** interface independently of the [load_extension()] SQL function. @@ -3015,7 +3133,7 @@ ** be a NULL pointer, in which case the new setting is not reported back. **
    ** -**
    SQLITE_DBCONFIG_MAINDBNAME
    +** [[SQLITE_DBCONFIG_MAINDBNAME]]
    SQLITE_DBCONFIG_MAINDBNAME
    **
    ^This option is used to change the name of the "main" database ** schema. ^The sole argument is a pointer to a constant UTF8 string ** which will become the new schema name in place of "main". ^SQLite @@ -3024,6 +3142,7 @@ ** until after the database connection closes. **
    ** +** [[SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE]] **
    SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE
    **
    Usually, when a database in wal mode is closed or detached from a ** database handle, SQLite checks if this will mean that there are now no @@ -3030,13 +3149,14 @@ ** connections at all to the database. If so, it performs a checkpoint ** operation before closing the connection. This option may be used to ** override this behaviour. The first parameter passed to this operation -** is an integer - non-zero to disable checkpoints-on-close, or zero (the -** default) to enable them. The second parameter is a pointer to an integer +** is an integer - positive to disable checkpoints-on-close, or zero (the +** default) to enable them, and negative to leave the setting unchanged. +** The second parameter is a pointer to an integer ** into which is written 0 or 1 to indicate whether checkpoints-on-close ** have been disabled - 0 if they are not disabled, 1 if they are. **
    ** -**
    SQLITE_DBCONFIG_ENABLE_QPSG
    +** [[SQLITE_DBCONFIG_ENABLE_QPSG]]
    SQLITE_DBCONFIG_ENABLE_QPSG
    **
    ^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates ** the [query planner stability guarantee] (QPSG). When the QPSG is active, ** a single SQL query statement will always use the same algorithm regardless @@ -3045,8 +3165,57 @@ ** slower. But the QPSG has the advantage of more predictable behavior. With ** the QPSG active, SQLite will always use the same query plan in the field as ** was used during testing in the lab. +** The first argument to this setting is an integer which is 0 to disable +** the QPSG, positive to enable QPSG, or negative to leave the setting +** unchanged. The second parameter is a pointer to an integer into which +** is written 0 or 1 to indicate whether the QPSG is disabled or enabled +** following this call. **
    ** +** [[SQLITE_DBCONFIG_TRIGGER_EQP]]
    SQLITE_DBCONFIG_TRIGGER_EQP
    +**
    By default, the output of EXPLAIN QUERY PLAN commands does not +** include output for any operations performed by trigger programs. This +** option is used to set or clear (the default) a flag that governs this +** behavior. The first parameter passed to this operation is an integer - +** positive to enable output for trigger programs, or zero to disable it, +** or negative to leave the setting unchanged. +** The second parameter is a pointer to an integer into which is written +** 0 or 1 to indicate whether output-for-triggers has been disabled - 0 if +** it is not disabled, 1 if it is. +**
    +** +** [[SQLITE_DBCONFIG_RESET_DATABASE]]
    SQLITE_DBCONFIG_RESET_DATABASE
    +**
    Set the SQLITE_DBCONFIG_RESET_DATABASE flag and then run +** [VACUUM] in order to reset a database back to an empty database +** with no schema and no content. The following process works even for +** a badly corrupted database file: +**
      +**
    1. If the database connection is newly opened, make sure it has read the +** database schema by preparing then discarding some query against the +** database, or calling sqlite3_table_column_metadata(), ignoring any +** errors. This step is only necessary if the application desires to keep +** the database in WAL mode after the reset if it was in WAL mode before +** the reset. +**
    2. sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 1, 0); +**
    3. [sqlite3_exec](db, "[VACUUM]", 0, 0, 0); +**
    4. sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0); +**
    +** Because resetting a database is destructive and irreversible, the +** process requires the use of this obscure API and multiple steps to help +** ensure that it does not happen by accident. +** +** [[SQLITE_DBCONFIG_DEFENSIVE]]
    SQLITE_DBCONFIG_DEFENSIVE
    +**
    The SQLITE_DBCONFIG_DEFENSIVE option activates or deactivates the +** "defensive" flag for a database connection. When the defensive +** flag is enabled, language features that allow ordinary SQL to +** deliberately corrupt the database file are disabled. The disabled +** features include but are not limited to the following: +**
      +**
    • The [PRAGMA writable_schema=ON] statement. +**
    • Writes to the [sqlite_dbpage] virtual table. +**
    • Direct writes to [shadow tables]. +**
    +**
    **
    */ #define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */ @@ -3057,8 +3226,11 @@ #define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */ #define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE 1006 /* int int* */ #define SQLITE_DBCONFIG_ENABLE_QPSG 1007 /* int int* */ +#define SQLITE_DBCONFIG_TRIGGER_EQP 1008 /* int int* */ +#define SQLITE_DBCONFIG_RESET_DATABASE 1009 /* int int* */ +#define SQLITE_DBCONFIG_DEFENSIVE 1010 /* int int* */ +#define SQLITE_DBCONFIG_MAX 1010 /* Largest DBCONFIG */ - /* ** CAPI3REF: Enable Or Disable Extended Result Codes ** METHOD: sqlite3 @@ -3185,12 +3357,17 @@ ** program, the value returned reflects the number of rows modified by the ** previous INSERT, UPDATE or DELETE statement within the same trigger. ** -** See also the [sqlite3_total_changes()] interface, the -** [count_changes pragma], and the [changes() SQL function]. -** ** If a separate thread makes changes on the same database connection ** while [sqlite3_changes()] is running then the value returned ** is unpredictable and not meaningful. +** +** See also: +**
      +**
    • the [sqlite3_total_changes()] interface +**
    • the [count_changes pragma] +**
    • the [changes() SQL function] +**
    • the [data_version pragma] +**
    */ SQLITE_API int sqlite3_changes(sqlite3*); @@ -3208,13 +3385,26 @@ ** count, but those made as part of REPLACE constraint resolution are ** not. ^Changes to a view that are intercepted by INSTEAD OF triggers ** are not counted. +** +** This the [sqlite3_total_changes(D)] interface only reports the number +** of rows that changed due to SQL statement run against database +** connection D. Any changes by other database connections are ignored. +** To detect changes against a database file from other database +** connections use the [PRAGMA data_version] command or the +** [SQLITE_FCNTL_DATA_VERSION] [file control]. ** -** See also the [sqlite3_changes()] interface, the -** [count_changes pragma], and the [total_changes() SQL function]. -** ** If a separate thread makes changes on the same database connection ** while [sqlite3_total_changes()] is running then the value ** returned is unpredictable and not meaningful. +** +** See also: +**
      +**
    • the [sqlite3_changes()] interface +**
    • the [count_changes pragma] +**
    • the [changes() SQL function] +**
    • the [data_version pragma] +**
    • the [SQLITE_FCNTL_DATA_VERSION] [file control] +**
    */ SQLITE_API int sqlite3_total_changes(sqlite3*); @@ -3463,16 +3653,16 @@ ** ** These routines are work-alikes of the "printf()" family of functions ** from the standard C library. -** These routines understand most of the common K&R formatting options, -** plus some additional non-standard formats, detailed below. -** Note that some of the more obscure formatting options from recent -** C-library standards are omitted from this implementation. +** These routines understand most of the common formatting options from +** the standard library printf() +** plus some additional non-standard formats ([%q], [%Q], [%w], and [%z]). +** See the [built-in printf()] documentation for details. ** ** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their -** results into memory obtained from [sqlite3_malloc()]. +** results into memory obtained from [sqlite3_malloc64()]. ** The strings returned by these two routines should be ** released by [sqlite3_free()]. ^Both routines return a -** NULL pointer if [sqlite3_malloc()] is unable to allocate enough +** NULL pointer if [sqlite3_malloc64()] is unable to allocate enough ** memory to hold the resulting string. ** ** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from @@ -3496,71 +3686,7 @@ ** ** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf(). ** -** These routines all implement some additional formatting -** options that are useful for constructing SQL statements. -** All of the usual printf() formatting options apply. In addition, there -** is are "%q", "%Q", "%w" and "%z" options. -** -** ^(The %q option works like %s in that it substitutes a nul-terminated -** string from the argument list. But %q also doubles every '\'' character. -** %q is designed for use inside a string literal.)^ By doubling each '\'' -** character it escapes that character and allows it to be inserted into -** the string. -** -** For example, assume the string variable zText contains text as follows: -** -** 
    -**  char *zText = "It's a happy day!";
-**
    -** -** One can use this text in an SQL statement as follows: -** -** 
    -**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
    -** -** Because the %q format string is used, the '\'' character in zText -** is escaped and the SQL generated is as follows: -** -** 
    -**  INSERT INTO table1 VALUES('It''s a happy day!')
-**
    -** -** This is correct. Had we used %s instead of %q, the generated SQL -** would have looked like this: -** -** 
    -**  INSERT INTO table1 VALUES('It's a happy day!');
-**
    -** -** This second example is an SQL syntax error. As a general rule you should -** always use %q instead of %s when inserting text into a string literal. -** -** ^(The %Q option works like %q except it also adds single quotes around -** the outside of the total string. Additionally, if the parameter in the -** argument list is a NULL pointer, %Q substitutes the text "NULL" (without -** single quotes).)^ So, for example, one could say: -** -** 
    -**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
    -** -** The code above will render a correct SQL statement in the zSQL -** variable even if the zText variable is a NULL pointer. -** -** ^(The "%w" formatting option is like "%q" except that it expects to -** be contained within double-quotes instead of single quotes, and it -** escapes the double-quote character instead of the single-quote -** character.)^ The "%w" formatting option is intended for safely inserting -** table and column names into a constructed SQL statement. -** -** ^(The "%z" formatting option works like "%s" but with the -** addition that after the string has been read and copied into -** the result, [sqlite3_free()] is called on the input string.)^ +** See also: [built-in printf()], [printf() SQL function] */ SQLITE_API char *sqlite3_mprintf(const char*,...); SQLITE_API char *sqlite3_vmprintf(const char*, va_list); @@ -3918,8 +4044,8 @@ ** KEYWORDS: SQLITE_TRACE ** ** These constants identify classes of events that can be monitored -** using the [sqlite3_trace_v2()] tracing logic. The third argument -** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of +** using the [sqlite3_trace_v2()] tracing logic. The M argument +** to [sqlite3_trace_v2(D,M,X,P)] is an OR-ed combination of one or more of ** the following constants. ^The first argument to the trace callback ** is one of the following constants. ** @@ -4128,10 +4254,10 @@ ** ^If [URI filename] interpretation is enabled, and the filename argument ** begins with "file:", then the filename is interpreted as a URI. ^URI ** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is -** set in the fourth argument to sqlite3_open_v2(), or if it has +** set in the third argument to sqlite3_open_v2(), or if it has ** been enabled globally using the [SQLITE_CONFIG_URI] option with the ** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option. -** As of SQLite version 3.7.7, URI filename interpretation is turned off +** URI filename interpretation is turned off ** by default, but future releases of SQLite might enable URI filename ** interpretation by default. See "[URI filenames]" for additional ** information. @@ -4334,13 +4460,24 @@ ** [database connection] D failed, then the sqlite3_errcode(D) interface ** returns the numeric [result code] or [extended result code] for that ** API call. -** If the most recent API call was successful, -** then the return value from sqlite3_errcode() is undefined. ** ^The sqlite3_extended_errcode() ** interface is the same except that it always returns the ** [extended result code] even when extended result codes are ** disabled. ** +** The values returned by sqlite3_errcode() and/or +** sqlite3_extended_errcode() might change with each API call. +** Except, there are some interfaces that are guaranteed to never +** change the value of the error code. The error-code preserving +** interfaces are: +** +**
      +**
    • sqlite3_errcode() +**
    • sqlite3_extended_errcode() +**
    • sqlite3_errmsg() +**
    • sqlite3_errmsg16() +**
    +** ** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language ** text that describes the error, as either UTF-8 or UTF-16 respectively. ** ^(Memory to hold the error message string is managed internally. @@ -4530,9 +4667,19 @@ ** on this hint by avoiding the use of [lookaside memory] so as not to ** deplete the limited store of lookaside memory. Future versions of ** SQLite may act on this hint differently. +** +** [[SQLITE_PREPARE_NORMALIZE]] ^(
    SQLITE_PREPARE_NORMALIZE
    +**
    The SQLITE_PREPARE_NORMALIZE flag indicates that a normalized +** representation of the SQL statement should be calculated and then +** associated with the prepared statement, which can be obtained via +** the [sqlite3_normalized_sql()] interface.)^ The semantics used to +** normalize a SQL statement are unspecified and subject to change. +** At a minimum, literal values will be replaced with suitable +** placeholders. ** */ #define SQLITE_PREPARE_PERSISTENT 0x01 +#define SQLITE_PREPARE_NORMALIZE 0x02 /* ** CAPI3REF: Compiling An SQL Statement @@ -4626,6 +4773,7 @@ ** or [GLOB] operator or if the parameter is compared to an indexed column ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. **
    • +** ** **

    ^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having ** the extra prepFlags parameter, which is a bit array consisting of zero or @@ -4632,7 +4780,6 @@ ** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags. ^The ** sqlite3_prepare_v2() interface works exactly the same as ** sqlite3_prepare_v3() with a zero prepFlags parameter. -** */ SQLITE_API int sqlite3_prepare( sqlite3 *db, /* Database handle */ @@ -4690,6 +4837,11 @@ ** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8 ** string containing the SQL text of prepared statement P with ** [bound parameters] expanded. +** ^The sqlite3_normalized_sql(P) interface returns a pointer to a UTF-8 +** string containing the normalized SQL text of prepared statement P. The +** semantics used to normalize a SQL statement are unspecified and subject +** to change. At a minimum, literal values will be replaced with suitable +** placeholders. ** ** ^(For example, if a prepared statement is created using the SQL ** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345 @@ -4705,8 +4857,9 @@ ** bound parameter expansions. ^The [SQLITE_OMIT_TRACE] compile-time ** option causes sqlite3_expanded_sql() to always return NULL. ** -** ^The string returned by sqlite3_sql(P) is managed by SQLite and is -** automatically freed when the prepared statement is finalized. +** ^The strings returned by sqlite3_sql(P) and sqlite3_normalized_sql(P) +** are managed by SQLite and are automatically freed when the prepared +** statement is finalized. ** ^The string returned by sqlite3_expanded_sql(P), on the other hand, ** is obtained from [sqlite3_malloc()] and must be free by the application ** by passing it to [sqlite3_free()]. @@ -4713,6 +4866,7 @@ */ SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt); SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt); +SQLITE_API const char *sqlite3_normalized_sql(sqlite3_stmt *pStmt); /* ** CAPI3REF: Determine If An SQL Statement Writes The Database @@ -4805,8 +4959,9 @@ ** implementation of [application-defined SQL functions] are protected. ** ^The sqlite3_value object returned by ** [sqlite3_column_value()] is unprotected. -** Unprotected sqlite3_value objects may only be used with -** [sqlite3_result_value()] and [sqlite3_bind_value()]. +** Unprotected sqlite3_value objects may only be used as arguments +** to [sqlite3_result_value()], [sqlite3_bind_value()], and +** [sqlite3_value_dup()]. ** The [sqlite3_value_blob | sqlite3_value_type()] family of ** interfaces require protected sqlite3_value objects. */ @@ -5228,7 +5383,7 @@ ** other than [SQLITE_ROW] before any subsequent invocation of ** sqlite3_step(). Failure to reset the prepared statement using ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from -** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1]), +** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1], ** sqlite3_step() began ** calling [sqlite3_reset()] automatically in this circumstance rather ** than returning [SQLITE_MISUSE]. This is not considered a compatibility @@ -5493,11 +5648,25 @@ ** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into ** [sqlite3_free()]. ** -** ^(If a memory allocation error occurs during the evaluation of any -** of these routines, a default value is returned. The default value -** is either the integer 0, the floating point number 0.0, or a NULL -** pointer. Subsequent calls to [sqlite3_errcode()] will return -** [SQLITE_NOMEM].)^ +** As long as the input parameters are correct, these routines will only +** fail if an out-of-memory error occurs during a format conversion. +** Only the following subset of interfaces are subject to out-of-memory +** errors: +** +**

      +**
    • sqlite3_column_blob() +**
    • sqlite3_column_text() +**
    • sqlite3_column_text16() +**
    • sqlite3_column_bytes() +**
    • sqlite3_column_bytes16() +**
    +** +** If an out-of-memory error occurs, then the return value from these +** routines is the same as if the column had contained an SQL NULL value. +** Valid SQL NULL returns can be distinguished from out-of-memory errors +** by invoking the [sqlite3_errcode()] immediately after the suspect +** return value is obtained and before any +** other SQLite interface is called on the same [database connection]. */ SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol); SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol); @@ -5574,11 +5743,13 @@ ** ** ^These functions (collectively known as "function creation routines") ** are used to add SQL functions or aggregates or to redefine the behavior -** of existing SQL functions or aggregates. The only differences between -** these routines are the text encoding expected for -** the second parameter (the name of the function being created) -** and the presence or absence of a destructor callback for -** the application data pointer. +** of existing SQL functions or aggregates. The only differences between +** the three "sqlite3_create_function*" routines are the text encoding +** expected for the second parameter (the name of the function being +** created) and the presence or absence of a destructor callback for +** the application data pointer. Function sqlite3_create_window_function() +** is similar, but allows the user to supply the extra callback functions +** needed by [aggregate window functions]. ** ** ^The first parameter is the [database connection] to which the SQL ** function is to be added. ^If an application uses more than one database @@ -5624,7 +5795,8 @@ ** ^(The fifth parameter is an arbitrary pointer. The implementation of the ** function can gain access to this pointer using [sqlite3_user_data()].)^ ** -** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are +** ^The sixth, seventh and eighth parameters passed to the three +** "sqlite3_create_function*" functions, xFunc, xStep and xFinal, are ** pointers to C-language functions that implement the SQL function or ** aggregate. ^A scalar SQL function requires an implementation of the xFunc ** callback only; NULL pointers must be passed as the xStep and xFinal @@ -5633,16 +5805,25 @@ ** SQL function or aggregate, pass NULL pointers for all three function ** callbacks. ** -** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL, -** then it is destructor for the application data pointer. -** The destructor is invoked when the function is deleted, either by being -** overloaded or when the database connection closes.)^ -** ^The destructor is also invoked if the call to -** sqlite3_create_function_v2() fails. -** ^When the destructor callback of the tenth parameter is invoked, it -** is passed a single argument which is a copy of the application data -** pointer which was the fifth parameter to sqlite3_create_function_v2(). +** ^The sixth, seventh, eighth and ninth parameters (xStep, xFinal, xValue +** and xInverse) passed to sqlite3_create_window_function are pointers to +** C-language callbacks that implement the new function. xStep and xFinal +** must both be non-NULL. xValue and xInverse may either both be NULL, in +** which case a regular aggregate function is created, or must both be +** non-NULL, in which case the new function may be used as either an aggregate +** or aggregate window function. More details regarding the implementation +** of aggregate window functions are +** [user-defined window functions|available here]. ** +** ^(If the final parameter to sqlite3_create_function_v2() or +** sqlite3_create_window_function() is not NULL, then it is destructor for +** the application data pointer. The destructor is invoked when the function +** is deleted, either by being overloaded or when the database connection +** closes.)^ ^The destructor is also invoked if the call to +** sqlite3_create_function_v2() fails. ^When the destructor callback is +** invoked, it is passed a single argument which is a copy of the application +** data pointer which was the fifth parameter to sqlite3_create_function_v2(). +** ** ^It is permitted to register multiple implementations of the same ** functions with the same name but with either differing numbers of ** arguments or differing preferred text encodings. ^SQLite will use @@ -5694,6 +5875,18 @@ void (*xFinal)(sqlite3_context*), void(*xDestroy)(void*) ); +SQLITE_API int sqlite3_create_window_function( + sqlite3 *db, + const char *zFunctionName, + int nArg, + int eTextRep, + void *pApp, + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value**), + void(*xDestroy)(void*) +); /* ** CAPI3REF: Text Encodings @@ -5764,6 +5957,9 @@ ** datatype of the value **
    sqlite3_value_numeric_type   ** →  Best numeric datatype of the value +**
    sqlite3_value_nochange   +** →  True if the column is unchanged in an UPDATE +** against a virtual table. **
    ** ** Details: @@ -5812,6 +6008,19 @@ ** then the conversion is performed. Otherwise no conversion occurs. ** The [SQLITE_INTEGER | datatype] after conversion is returned.)^ ** +** ^Within the [xUpdate] method of a [virtual table], the +** sqlite3_value_nochange(X) interface returns true if and only if +** the column corresponding to X is unchanged by the UPDATE operation +** that the xUpdate method call was invoked to implement and if +** and the prior [xColumn] method call that was invoked to extracted +** the value for that column returned without setting a result (probably +** because it queried [sqlite3_vtab_nochange()] and found that the column +** was unchanging). ^Within an [xUpdate] method, any value for which +** sqlite3_value_nochange(X) is true will in all other respects appear +** to be a NULL value. If sqlite3_value_nochange(X) is invoked anywhere other +** than within an [xUpdate] method call for an UPDATE statement, then +** the return value is arbitrary and meaningless. +** ** Please pay particular attention to the fact that the pointer returned ** from [sqlite3_value_blob()], [sqlite3_value_text()], or ** [sqlite3_value_text16()] can be invalidated by a subsequent call to @@ -5820,6 +6029,28 @@ ** ** These routines must be called from the same thread as ** the SQL function that supplied the [sqlite3_value*] parameters. +** +** As long as the input parameter is correct, these routines can only +** fail if an out-of-memory error occurs during a format conversion. +** Only the following subset of interfaces are subject to out-of-memory +** errors: +** +**
      +**
    • sqlite3_value_blob() +**
    • sqlite3_value_text() +**
    • sqlite3_value_text16() +**
    • sqlite3_value_text16le() +**
    • sqlite3_value_text16be() +**
    • sqlite3_value_bytes() +**
    • sqlite3_value_bytes16() +**
    +** +** If an out-of-memory error occurs, then the return value from these +** routines is the same as if the column had contained an SQL NULL value. +** Valid SQL NULL returns can be distinguished from out-of-memory errors +** by invoking the [sqlite3_errcode()] immediately after the suspect +** return value is obtained and before any +** other SQLite interface is called on the same [database connection]. */ SQLITE_API const void *sqlite3_value_blob(sqlite3_value*); SQLITE_API double sqlite3_value_double(sqlite3_value*); @@ -5834,6 +6065,7 @@ SQLITE_API int sqlite3_value_bytes16(sqlite3_value*); SQLITE_API int sqlite3_value_type(sqlite3_value*); SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); +SQLITE_API int sqlite3_value_nochange(sqlite3_value*); /* ** CAPI3REF: Finding The Subtype Of SQL Values @@ -6490,6 +6722,41 @@ SQLITE_API char *sqlite3_data_directory; /* +** CAPI3REF: Win32 Specific Interface +** +** These interfaces are available only on Windows. The +** [sqlite3_win32_set_directory] interface is used to set the value associated +** with the [sqlite3_temp_directory] or [sqlite3_data_directory] variable, to +** zValue, depending on the value of the type parameter. The zValue parameter +** should be NULL to cause the previous value to be freed via [sqlite3_free]; +** a non-NULL value will be copied into memory obtained from [sqlite3_malloc] +** prior to being used. The [sqlite3_win32_set_directory] interface returns +** [SQLITE_OK] to indicate success, [SQLITE_ERROR] if the type is unsupported, +** or [SQLITE_NOMEM] if memory could not be allocated. The value of the +** [sqlite3_data_directory] variable is intended to act as a replacement for +** the current directory on the sub-platforms of Win32 where that concept is +** not present, e.g. WinRT and UWP. The [sqlite3_win32_set_directory8] and +** [sqlite3_win32_set_directory16] interfaces behave exactly the same as the +** sqlite3_win32_set_directory interface except the string parameter must be +** UTF-8 or UTF-16, respectively. +*/ +SQLITE_API int sqlite3_win32_set_directory( + unsigned long type, /* Identifier for directory being set or reset */ + void *zValue /* New value for directory being set or reset */ +); +SQLITE_API int sqlite3_win32_set_directory8(unsigned long type, const char *zValue); +SQLITE_API int sqlite3_win32_set_directory16(unsigned long type, const void *zValue); + +/* +** CAPI3REF: Win32 Directory Types +** +** These macros are only available on Windows. They define the allowed values +** for the type argument to the [sqlite3_win32_set_directory] interface. +*/ +#define SQLITE_WIN32_DATA_DIRECTORY_TYPE 1 +#define SQLITE_WIN32_TEMP_DIRECTORY_TYPE 2 + +/* ** CAPI3REF: Test For Auto-Commit Mode ** KEYWORDS: {autocommit mode} ** METHOD: sqlite3 @@ -7089,6 +7356,9 @@ int (*xSavepoint)(sqlite3_vtab *pVTab, int); int (*xRelease)(sqlite3_vtab *pVTab, int); int (*xRollbackTo)(sqlite3_vtab *pVTab, int); + /* The methods above are in versions 1 and 2 of the sqlite_module object. + ** Those below are for version 3 and greater. */ + int (*xShadowName)(const char*); }; /* @@ -7221,6 +7491,10 @@ /* ** CAPI3REF: Virtual Table Scan Flags +** +** Virtual table implementations are allowed to set the +** [sqlite3_index_info].idxFlags field to some combination of +** these bits. */ #define SQLITE_INDEX_SCAN_UNIQUE 1 /* Scan visits at most 1 row */ @@ -7232,15 +7506,21 @@ ** an operator that is part of a constraint term in the wHERE clause of ** a query that uses a [virtual table]. */ -#define SQLITE_INDEX_CONSTRAINT_EQ 2 -#define SQLITE_INDEX_CONSTRAINT_GT 4 -#define SQLITE_INDEX_CONSTRAINT_LE 8 -#define SQLITE_INDEX_CONSTRAINT_LT 16 -#define SQLITE_INDEX_CONSTRAINT_GE 32 -#define SQLITE_INDEX_CONSTRAINT_MATCH 64 -#define SQLITE_INDEX_CONSTRAINT_LIKE 65 -#define SQLITE_INDEX_CONSTRAINT_GLOB 66 -#define SQLITE_INDEX_CONSTRAINT_REGEXP 67 +#define SQLITE_INDEX_CONSTRAINT_EQ 2 +#define SQLITE_INDEX_CONSTRAINT_GT 4 +#define SQLITE_INDEX_CONSTRAINT_LE 8 +#define SQLITE_INDEX_CONSTRAINT_LT 16 +#define SQLITE_INDEX_CONSTRAINT_GE 32 +#define SQLITE_INDEX_CONSTRAINT_MATCH 64 +#define SQLITE_INDEX_CONSTRAINT_LIKE 65 +#define SQLITE_INDEX_CONSTRAINT_GLOB 66 +#define SQLITE_INDEX_CONSTRAINT_REGEXP 67 +#define SQLITE_INDEX_CONSTRAINT_NE 68 +#define SQLITE_INDEX_CONSTRAINT_ISNOT 69 +#define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70 +#define SQLITE_INDEX_CONSTRAINT_ISNULL 71 +#define SQLITE_INDEX_CONSTRAINT_IS 72 +#define SQLITE_INDEX_CONSTRAINT_FUNCTION 150 /* ** CAPI3REF: Register A Virtual Table Implementation @@ -7917,6 +8197,7 @@ /* ** CAPI3REF: Low-Level Control Of Database Files ** METHOD: sqlite3 +** KEYWORDS: {file control} ** ** ^The [sqlite3_file_control()] interface makes a direct call to the ** xFileControl method for the [sqlite3_io_methods] object associated @@ -7931,11 +8212,18 @@ ** the xFileControl method. ^The return value of the xFileControl ** method becomes the return value of this routine. ** -** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes +** A few opcodes for [sqlite3_file_control()] are handled directly +** by the SQLite core and never invoke the +** sqlite3_io_methods.xFileControl method. +** ^The [SQLITE_FCNTL_FILE_POINTER] value for the op parameter causes ** a pointer to the underlying [sqlite3_file] object to be written into -** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER -** case is a short-circuit path which does not actually invoke the -** underlying sqlite3_io_methods.xFileControl method. +** the space pointed to by the 4th parameter. The +** [SQLITE_FCNTL_JOURNAL_POINTER] works similarly except that it returns +** the [sqlite3_file] object associated with the journal file instead of +** the main database. The [SQLITE_FCNTL_VFS_POINTER] opcode returns +** a pointer to the underlying [sqlite3_vfs] object for the file. +** The [SQLITE_FCNTL_DATA_VERSION] returns the data version counter +** from the pager. ** ** ^If the second parameter (zDbName) does not match the name of any ** open database file, then SQLITE_ERROR is returned. ^This error @@ -7945,7 +8233,7 @@ ** an incorrect zDbName and an SQLITE_ERROR return from the underlying ** xFileControl method. ** -** See also: [SQLITE_FCNTL_LOCKSTATE] +** See also: [file control opcodes] */ SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*); @@ -7991,8 +8279,9 @@ #define SQLITE_TESTCTRL_ALWAYS 13 #define SQLITE_TESTCTRL_RESERVE 14 #define SQLITE_TESTCTRL_OPTIMIZATIONS 15 -#define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 +#define SQLITE_TESTCTRL_ISKEYWORD 16 /* NOT USED */ +#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 /* NOT USED */ +#define SQLITE_TESTCTRL_INTERNAL_FUNCTIONS 17 #define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 #define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */ #define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD 19 @@ -8002,9 +8291,193 @@ #define SQLITE_TESTCTRL_ISINIT 23 #define SQLITE_TESTCTRL_SORTER_MMAP 24 #define SQLITE_TESTCTRL_IMPOSTER 25 -#define SQLITE_TESTCTRL_LAST 25 +#define SQLITE_TESTCTRL_PARSER_COVERAGE 26 +#define SQLITE_TESTCTRL_LAST 26 /* Largest TESTCTRL */ /* +** CAPI3REF: SQL Keyword Checking +** +** These routines provide access to the set of SQL language keywords +** recognized by SQLite. Applications can uses these routines to determine +** whether or not a specific identifier needs to be escaped (for example, +** by enclosing in double-quotes) so as not to confuse the parser. +** +** The sqlite3_keyword_count() interface returns the number of distinct +** keywords understood by SQLite. +** +** The sqlite3_keyword_name(N,Z,L) interface finds the N-th keyword and +** makes *Z point to that keyword expressed as UTF8 and writes the number +** of bytes in the keyword into *L. The string that *Z points to is not +** zero-terminated. The sqlite3_keyword_name(N,Z,L) routine returns +** SQLITE_OK if N is within bounds and SQLITE_ERROR if not. If either Z +** or L are NULL or invalid pointers then calls to +** sqlite3_keyword_name(N,Z,L) result in undefined behavior. +** +** The sqlite3_keyword_check(Z,L) interface checks to see whether or not +** the L-byte UTF8 identifier that Z points to is a keyword, returning non-zero +** if it is and zero if not. +** +** The parser used by SQLite is forgiving. It is often possible to use +** a keyword as an identifier as long as such use does not result in a +** parsing ambiguity. For example, the statement +** "CREATE TABLE BEGIN(REPLACE,PRAGMA,END);" is accepted by SQLite, and +** creates a new table named "BEGIN" with three columns named +** "REPLACE", "PRAGMA", and "END". Nevertheless, best practice is to avoid +** using keywords as identifiers. Common techniques used to avoid keyword +** name collisions include: +**
      +**
    • Put all identifier names inside double-quotes. This is the official +** SQL way to escape identifier names. +**
    • Put identifier names inside [...]. This is not standard SQL, +** but it is what SQL Server does and so lots of programmers use this +** technique. +**
    • Begin every identifier with the letter "Z" as no SQL keywords start +** with "Z". +**
    • Include a digit somewhere in every identifier name. +**
    +** +** Note that the number of keywords understood by SQLite can depend on +** compile-time options. For example, "VACUUM" is not a keyword if +** SQLite is compiled with the [-DSQLITE_OMIT_VACUUM] option. Also, +** new keywords may be added to future releases of SQLite. +*/ +SQLITE_API int sqlite3_keyword_count(void); +SQLITE_API int sqlite3_keyword_name(int,const char**,int*); +SQLITE_API int sqlite3_keyword_check(const char*,int); + +/* +** CAPI3REF: Dynamic String Object +** KEYWORDS: {dynamic string} +** +** An instance of the sqlite3_str object contains a dynamically-sized +** string under construction. +** +** The lifecycle of an sqlite3_str object is as follows: +**
      +**
    1. ^The sqlite3_str object is created using [sqlite3_str_new()]. +**
    2. ^Text is appended to the sqlite3_str object using various +** methods, such as [sqlite3_str_appendf()]. +**
    3. ^The sqlite3_str object is destroyed and the string it created +** is returned using the [sqlite3_str_finish()] interface. +**
    +*/ +typedef struct sqlite3_str sqlite3_str; + +/* +** CAPI3REF: Create A New Dynamic String Object +** CONSTRUCTOR: sqlite3_str +** +** ^The [sqlite3_str_new(D)] interface allocates and initializes +** a new [sqlite3_str] object. To avoid memory leaks, the object returned by +** [sqlite3_str_new()] must be freed by a subsequent call to +** [sqlite3_str_finish(X)]. +** +** ^The [sqlite3_str_new(D)] interface always returns a pointer to a +** valid [sqlite3_str] object, though in the event of an out-of-memory +** error the returned object might be a special singleton that will +** silently reject new text, always return SQLITE_NOMEM from +** [sqlite3_str_errcode()], always return 0 for +** [sqlite3_str_length()], and always return NULL from +** [sqlite3_str_finish(X)]. It is always safe to use the value +** returned by [sqlite3_str_new(D)] as the sqlite3_str parameter +** to any of the other [sqlite3_str] methods. +** +** The D parameter to [sqlite3_str_new(D)] may be NULL. If the +** D parameter in [sqlite3_str_new(D)] is not NULL, then the maximum +** length of the string contained in the [sqlite3_str] object will be +** the value set for [sqlite3_limit](D,[SQLITE_LIMIT_LENGTH]) instead +** of [SQLITE_MAX_LENGTH]. +*/ +SQLITE_API sqlite3_str *sqlite3_str_new(sqlite3*); + +/* +** CAPI3REF: Finalize A Dynamic String +** DESTRUCTOR: sqlite3_str +** +** ^The [sqlite3_str_finish(X)] interface destroys the sqlite3_str object X +** and returns a pointer to a memory buffer obtained from [sqlite3_malloc64()] +** that contains the constructed string. The calling application should +** pass the returned value to [sqlite3_free()] to avoid a memory leak. +** ^The [sqlite3_str_finish(X)] interface may return a NULL pointer if any +** errors were encountered during construction of the string. ^The +** [sqlite3_str_finish(X)] interface will also return a NULL pointer if the +** string in [sqlite3_str] object X is zero bytes long. +*/ +SQLITE_API char *sqlite3_str_finish(sqlite3_str*); + +/* +** CAPI3REF: Add Content To A Dynamic String +** METHOD: sqlite3_str +** +** These interfaces add content to an sqlite3_str object previously obtained +** from [sqlite3_str_new()]. +** +** ^The [sqlite3_str_appendf(X,F,...)] and +** [sqlite3_str_vappendf(X,F,V)] interfaces uses the [built-in printf] +** functionality of SQLite to append formatted text onto the end of +** [sqlite3_str] object X. +** +** ^The [sqlite3_str_append(X,S,N)] method appends exactly N bytes from string S +** onto the end of the [sqlite3_str] object X. N must be non-negative. +** S must contain at least N non-zero bytes of content. To append a +** zero-terminated string in its entirety, use the [sqlite3_str_appendall()] +** method instead. +** +** ^The [sqlite3_str_appendall(X,S)] method appends the complete content of +** zero-terminated string S onto the end of [sqlite3_str] object X. +** +** ^The [sqlite3_str_appendchar(X,N,C)] method appends N copies of the +** single-byte character C onto the end of [sqlite3_str] object X. +** ^This method can be used, for example, to add whitespace indentation. +** +** ^The [sqlite3_str_reset(X)] method resets the string under construction +** inside [sqlite3_str] object X back to zero bytes in length. +** +** These methods do not return a result code. ^If an error occurs, that fact +** is recorded in the [sqlite3_str] object and can be recovered by a +** subsequent call to [sqlite3_str_errcode(X)]. +*/ +SQLITE_API void sqlite3_str_appendf(sqlite3_str*, const char *zFormat, ...); +SQLITE_API void sqlite3_str_vappendf(sqlite3_str*, const char *zFormat, va_list); +SQLITE_API void sqlite3_str_append(sqlite3_str*, const char *zIn, int N); +SQLITE_API void sqlite3_str_appendall(sqlite3_str*, const char *zIn); +SQLITE_API void sqlite3_str_appendchar(sqlite3_str*, int N, char C); +SQLITE_API void sqlite3_str_reset(sqlite3_str*); + +/* +** CAPI3REF: Status Of A Dynamic String +** METHOD: sqlite3_str +** +** These interfaces return the current status of an [sqlite3_str] object. +** +** ^If any prior errors have occurred while constructing the dynamic string +** in sqlite3_str X, then the [sqlite3_str_errcode(X)] method will return +** an appropriate error code. ^The [sqlite3_str_errcode(X)] method returns +** [SQLITE_NOMEM] following any out-of-memory error, or +** [SQLITE_TOOBIG] if the size of the dynamic string exceeds +** [SQLITE_MAX_LENGTH], or [SQLITE_OK] if there have been no errors. +** +** ^The [sqlite3_str_length(X)] method returns the current length, in bytes, +** of the dynamic string under construction in [sqlite3_str] object X. +** ^The length returned by [sqlite3_str_length(X)] does not include the +** zero-termination byte. +** +** ^The [sqlite3_str_value(X)] method returns a pointer to the current +** content of the dynamic string under construction in X. The value +** returned by [sqlite3_str_value(X)] is managed by the sqlite3_str object X +** and might be freed or altered by any subsequent method on the same +** [sqlite3_str] object. Applications must not used the pointer returned +** [sqlite3_str_value(X)] after any subsequent method call on the same +** object. ^Applications may change the content of the string returned +** by [sqlite3_str_value(X)] as long as they do not write into any bytes +** outside the range of 0 to [sqlite3_str_length(X)] and do not read or +** write any byte after any subsequent sqlite3_str method call. +*/ +SQLITE_API int sqlite3_str_errcode(sqlite3_str*); +SQLITE_API int sqlite3_str_length(sqlite3_str*); +SQLITE_API char *sqlite3_str_value(sqlite3_str*); + +/* ** CAPI3REF: SQLite Runtime Status ** ** ^These interfaces are used to retrieve runtime status information @@ -8051,8 +8524,7 @@ **
    This parameter is the current amount of memory checked out ** using [sqlite3_malloc()], either directly or indirectly. The ** figure includes calls made to [sqlite3_malloc()] by the application -** and internal memory usage by the SQLite library. Scratch memory -** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache +** and internal memory usage by the SQLite library. Auxiliary page-cache ** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in ** this parameter. The amount returned is the sum of the allocation ** sizes as reported by the xSize method in [sqlite3_mem_methods].
    )^ @@ -8090,29 +8562,14 @@ ** *pHighwater parameter to [sqlite3_status()] is of interest. ** The value written into the *pCurrent parameter is undefined.)^ ** -** [[SQLITE_STATUS_SCRATCH_USED]] ^(
    SQLITE_STATUS_SCRATCH_USED
    -**
    This parameter returns the number of allocations used out of the -** [scratch memory allocator] configured using -** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not -** in bytes. Since a single thread may only have one scratch allocation -** outstanding at time, this parameter also reports the number of threads -** using scratch memory at the same time.
    )^ +** [[SQLITE_STATUS_SCRATCH_USED]]
    SQLITE_STATUS_SCRATCH_USED
    +**
    No longer used.
    ** ** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(
    SQLITE_STATUS_SCRATCH_OVERFLOW
    -**
    This parameter returns the number of bytes of scratch memory -** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH] -** buffer and where forced to overflow to [sqlite3_malloc()]. The values -** returned include overflows because the requested allocation was too -** larger (that is, because the requested allocation was larger than the -** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer -** slots were available. -**
    )^ +**
    No longer used.
    ** -** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(
    SQLITE_STATUS_SCRATCH_SIZE
    -**
    This parameter records the largest memory allocation request -** handed to [scratch memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
    )^ +** [[SQLITE_STATUS_SCRATCH_SIZE]]
    SQLITE_STATUS_SCRATCH_SIZE
    +**
    No longer used.
    ** ** [[SQLITE_STATUS_PARSER_STACK]] ^(
    SQLITE_STATUS_PARSER_STACK
    **
    The *pHighwater parameter records the deepest parser stack. @@ -8125,12 +8582,12 @@ #define SQLITE_STATUS_MEMORY_USED 0 #define SQLITE_STATUS_PAGECACHE_USED 1 #define SQLITE_STATUS_PAGECACHE_OVERFLOW 2 -#define SQLITE_STATUS_SCRATCH_USED 3 -#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 +#define SQLITE_STATUS_SCRATCH_USED 3 /* NOT USED */ +#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 /* NOT USED */ #define SQLITE_STATUS_MALLOC_SIZE 5 #define SQLITE_STATUS_PARSER_STACK 6 #define SQLITE_STATUS_PAGECACHE_SIZE 7 -#define SQLITE_STATUS_SCRATCH_SIZE 8 +#define SQLITE_STATUS_SCRATCH_SIZE 8 /* NOT USED */ #define SQLITE_STATUS_MALLOC_COUNT 9 /* @@ -8253,6 +8710,15 @@ ** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0. **
    ** +** [[SQLITE_DBSTATUS_CACHE_SPILL]] ^(
    SQLITE_DBSTATUS_CACHE_SPILL
    +**
    This parameter returns the number of dirty cache entries that have +** been written to disk in the middle of a transaction due to the page +** cache overflowing. Transactions are more efficient if they are written +** to disk all at once. When pages spill mid-transaction, that introduces +** additional overhead. This parameter can be used help identify +** inefficiencies that can be resolve by increasing the cache size. +**
    +** ** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(
    SQLITE_DBSTATUS_DEFERRED_FKS
    **
    This parameter returns zero for the current value if and only if ** all foreign key constraints (deferred or immediate) have been @@ -8272,7 +8738,8 @@ #define SQLITE_DBSTATUS_CACHE_WRITE 9 #define SQLITE_DBSTATUS_DEFERRED_FKS 10 #define SQLITE_DBSTATUS_CACHE_USED_SHARED 11 -#define SQLITE_DBSTATUS_MAX 11 /* Largest defined DBSTATUS */ +#define SQLITE_DBSTATUS_CACHE_SPILL 12 +#define SQLITE_DBSTATUS_MAX 12 /* Largest defined DBSTATUS */ /* @@ -9227,6 +9694,7 @@ ** can use to customize and optimize their behavior. ** **
    +** [[SQLITE_VTAB_CONSTRAINT_SUPPORT]] **
    SQLITE_VTAB_CONSTRAINT_SUPPORT **
    Calls of the form ** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported, @@ -9273,6 +9741,40 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); /* +** CAPI3REF: Determine If Virtual Table Column Access Is For UPDATE +** +** If the sqlite3_vtab_nochange(X) routine is called within the [xColumn] +** method of a [virtual table], then it returns true if and only if the +** column is being fetched as part of an UPDATE operation during which the +** column value will not change. Applications might use this to substitute +** a return value that is less expensive to compute and that the corresponding +** [xUpdate] method understands as a "no-change" value. +** +** If the [xColumn] method calls sqlite3_vtab_nochange() and finds that +** the column is not changed by the UPDATE statement, then the xColumn +** method can optionally return without setting a result, without calling +** any of the [sqlite3_result_int|sqlite3_result_xxxxx() interfaces]. +** In that case, [sqlite3_value_nochange(X)] will return true for the +** same column in the [xUpdate] method. +*/ +SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*); + +/* +** CAPI3REF: Determine The Collation For a Virtual Table Constraint +** +** This function may only be called from within a call to the [xBestIndex] +** method of a [virtual table]. +** +** The first argument must be the sqlite3_index_info object that is the +** first parameter to the xBestIndex() method. The second argument must be +** an index into the aConstraint[] array belonging to the sqlite3_index_info +** structure passed to xBestIndex. This function returns a pointer to a buffer +** containing the name of the collation sequence for the corresponding +** constraint. +*/ +SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int); + +/* ** CAPI3REF: Conflict resolution modes ** KEYWORDS: {conflict resolution mode} ** @@ -9542,7 +10044,6 @@ /* ** CAPI3REF: Database Snapshot ** KEYWORDS: {snapshot} {sqlite3_snapshot} -** EXPERIMENTAL ** ** An instance of the snapshot object records the state of a [WAL mode] ** database for some specific point in history. @@ -9559,11 +10060,6 @@ ** version of the database file so that it is possible to later open a new read ** transaction that sees that historical version of the database rather than ** the most recent version. -** -** The constructor for this object is [sqlite3_snapshot_get()]. The -** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer -** to an historical snapshot (if possible). The destructor for -** sqlite3_snapshot objects is [sqlite3_snapshot_free()]. */ typedef struct sqlite3_snapshot { unsigned char hidden[48]; @@ -9571,7 +10067,7 @@ /* ** CAPI3REF: Record A Database Snapshot -** EXPERIMENTAL +** CONSTRUCTOR: sqlite3_snapshot ** ** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a ** new [sqlite3_snapshot] object that records the current state of @@ -9587,7 +10083,7 @@ ** in this case. ** **
      -**
    • The database handle must be in [autocommit mode]. +**
    • The database handle must not be in [autocommit mode]. ** **
    • Schema S of [database connection] D must be a [WAL mode] database. ** @@ -9610,7 +10106,7 @@ ** to avoid a memory leak. ** ** The [sqlite3_snapshot_get()] interface is only available when the -** SQLITE_ENABLE_SNAPSHOT compile-time option is used. +** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get( sqlite3 *db, @@ -9620,24 +10116,35 @@ /* ** CAPI3REF: Start a read transaction on an historical snapshot -** EXPERIMENTAL +** METHOD: sqlite3_snapshot ** -** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a -** read transaction for schema S of -** [database connection] D such that the read transaction -** refers to historical [snapshot] P, rather than the most -** recent change to the database. -** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success -** or an appropriate [error code] if it fails. +** ^The [sqlite3_snapshot_open(D,S,P)] interface either starts a new read +** transaction or upgrades an existing one for schema S of +** [database connection] D such that the read transaction refers to +** historical [snapshot] P, rather than the most recent change to the +** database. ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK +** on success or an appropriate [error code] if it fails. ** -** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be -** the first operation following the [BEGIN] that takes the schema S -** out of [autocommit mode]. -** ^In other words, schema S must not currently be in -** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the -** database connection D must be out of [autocommit mode]. -** ^A [snapshot] will fail to open if it has been overwritten by a -** [checkpoint]. +** ^In order to succeed, the database connection must not be in +** [autocommit mode] when [sqlite3_snapshot_open(D,S,P)] is called. If there +** is already a read transaction open on schema S, then the database handle +** must have no active statements (SELECT statements that have been passed +** to sqlite3_step() but not sqlite3_reset() or sqlite3_finalize()). +** SQLITE_ERROR is returned if either of these conditions is violated, or +** if schema S does not exist, or if the snapshot object is invalid. +** +** ^A call to sqlite3_snapshot_open() will fail to open if the specified +** snapshot has been overwritten by a [checkpoint]. In this case +** SQLITE_ERROR_SNAPSHOT is returned. +** +** If there is already a read transaction open when this function is +** invoked, then the same read transaction remains open (on the same +** database snapshot) if SQLITE_ERROR, SQLITE_BUSY or SQLITE_ERROR_SNAPSHOT +** is returned. If another error code - for example SQLITE_PROTOCOL or an +** SQLITE_IOERR error code - is returned, then the final state of the +** read transaction is undefined. If SQLITE_OK is returned, then the +** read transaction is now open on database snapshot P. +** ** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the ** database connection D does not know that the database file for ** schema S is in [WAL mode]. A database connection might not know @@ -9648,7 +10155,7 @@ ** database connection in order to make it ready to use snapshots.) ** ** The [sqlite3_snapshot_open()] interface is only available when the -** SQLITE_ENABLE_SNAPSHOT compile-time option is used. +** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open( sqlite3 *db, @@ -9658,7 +10165,7 @@ /* ** CAPI3REF: Destroy a snapshot -** EXPERIMENTAL +** DESTRUCTOR: sqlite3_snapshot ** ** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P. ** The application must eventually free every [sqlite3_snapshot] object @@ -9665,13 +10172,13 @@ ** using this routine to avoid a memory leak. ** ** The [sqlite3_snapshot_free()] interface is only available when the -** SQLITE_ENABLE_SNAPSHOT compile-time option is used. +** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. */ SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*); /* ** CAPI3REF: Compare the ages of two snapshot handles. -** EXPERIMENTAL +** METHOD: sqlite3_snapshot ** ** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages ** of two valid snapshot handles. @@ -9690,6 +10197,9 @@ ** Otherwise, this API returns a negative value if P1 refers to an older ** snapshot than P2, zero if the two handles refer to the same database ** snapshot, and a positive value if P1 is a newer snapshot than P2. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_SNAPSHOT] option. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp( sqlite3_snapshot *p1, @@ -9698,27 +10208,152 @@ /* ** CAPI3REF: Recover snapshots from a wal file -** EXPERIMENTAL +** METHOD: sqlite3_snapshot ** -** If all connections disconnect from a database file but do not perform -** a checkpoint, the existing wal file is opened along with the database -** file the next time the database is opened. At this point it is only -** possible to successfully call sqlite3_snapshot_open() to open the most -** recent snapshot of the database (the one at the head of the wal file), -** even though the wal file may contain other valid snapshots for which -** clients have sqlite3_snapshot handles. +** If a [WAL file] remains on disk after all database connections close +** (either through the use of the [SQLITE_FCNTL_PERSIST_WAL] [file control] +** or because the last process to have the database opened exited without +** calling [sqlite3_close()]) and a new connection is subsequently opened +** on that database and [WAL file], the [sqlite3_snapshot_open()] interface +** will only be able to open the last transaction added to the WAL file +** even though the WAL file contains other valid transactions. ** -** This function attempts to scan the wal file associated with database zDb +** This function attempts to scan the WAL file associated with database zDb ** of database handle db and make all valid snapshots available to ** sqlite3_snapshot_open(). It is an error if there is already a read -** transaction open on the database, or if the database is not a wal mode +** transaction open on the database, or if the database is not a WAL mode ** database. ** ** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_SNAPSHOT] option. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb); /* +** CAPI3REF: Serialize a database +** +** The sqlite3_serialize(D,S,P,F) interface returns a pointer to memory +** that is a serialization of the S database on [database connection] D. +** If P is not a NULL pointer, then the size of the database in bytes +** is written into *P. +** +** For an ordinary on-disk database file, the serialization is just a +** copy of the disk file. For an in-memory database or a "TEMP" database, +** the serialization is the same sequence of bytes which would be written +** to disk if that database where backed up to disk. +** +** The usual case is that sqlite3_serialize() copies the serialization of +** the database into memory obtained from [sqlite3_malloc64()] and returns +** a pointer to that memory. The caller is responsible for freeing the +** returned value to avoid a memory leak. However, if the F argument +** contains the SQLITE_SERIALIZE_NOCOPY bit, then no memory allocations +** are made, and the sqlite3_serialize() function will return a pointer +** to the contiguous memory representation of the database that SQLite +** is currently using for that database, or NULL if the no such contiguous +** memory representation of the database exists. A contiguous memory +** representation of the database will usually only exist if there has +** been a prior call to [sqlite3_deserialize(D,S,...)] with the same +** values of D and S. +** The size of the database is written into *P even if the +** SQLITE_SERIALIZE_NOCOPY bit is set but no contiguous copy +** of the database exists. +** +** A call to sqlite3_serialize(D,S,P,F) might return NULL even if the +** SQLITE_SERIALIZE_NOCOPY bit is omitted from argument F if a memory +** allocation error occurs. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_DESERIALIZE] option. +*/ +SQLITE_API unsigned char *sqlite3_serialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to serialize. ex: "main", "temp", ... */ + sqlite3_int64 *piSize, /* Write size of the DB here, if not NULL */ + unsigned int mFlags /* Zero or more SQLITE_SERIALIZE_* flags */ +); + +/* +** CAPI3REF: Flags for sqlite3_serialize +** +** Zero or more of the following constants can be OR-ed together for +** the F argument to [sqlite3_serialize(D,S,P,F)]. +** +** SQLITE_SERIALIZE_NOCOPY means that [sqlite3_serialize()] will return +** a pointer to contiguous in-memory database that it is currently using, +** without making a copy of the database. If SQLite is not currently using +** a contiguous in-memory database, then this option causes +** [sqlite3_serialize()] to return a NULL pointer. SQLite will only be +** using a contiguous in-memory database if it has been initialized by a +** prior call to [sqlite3_deserialize()]. +*/ +#define SQLITE_SERIALIZE_NOCOPY 0x001 /* Do no memory allocations */ + +/* +** CAPI3REF: Deserialize a database +** +** The sqlite3_deserialize(D,S,P,N,M,F) interface causes the +** [database connection] D to disconnect from database S and then +** reopen S as an in-memory database based on the serialization contained +** in P. The serialized database P is N bytes in size. M is the size of +** the buffer P, which might be larger than N. If M is larger than N, and +** the SQLITE_DESERIALIZE_READONLY bit is not set in F, then SQLite is +** permitted to add content to the in-memory database as long as the total +** size does not exceed M bytes. +** +** If the SQLITE_DESERIALIZE_FREEONCLOSE bit is set in F, then SQLite will +** invoke sqlite3_free() on the serialization buffer when the database +** connection closes. If the SQLITE_DESERIALIZE_RESIZEABLE bit is set, then +** SQLite will try to increase the buffer size using sqlite3_realloc64() +** if writes on the database cause it to grow larger than M bytes. +** +** The sqlite3_deserialize() interface will fail with SQLITE_BUSY if the +** database is currently in a read transaction or is involved in a backup +** operation. +** +** If sqlite3_deserialize(D,S,P,N,M,F) fails for any reason and if the +** SQLITE_DESERIALIZE_FREEONCLOSE bit is set in argument F, then +** [sqlite3_free()] is invoked on argument P prior to returning. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_DESERIALIZE] option. +*/ +SQLITE_API int sqlite3_deserialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to reopen with the deserialization */ + unsigned char *pData, /* The serialized database content */ + sqlite3_int64 szDb, /* Number bytes in the deserialization */ + sqlite3_int64 szBuf, /* Total size of buffer pData[] */ + unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */ +); + +/* +** CAPI3REF: Flags for sqlite3_deserialize() +** +** The following are allowed values for 6th argument (the F argument) to +** the [sqlite3_deserialize(D,S,P,N,M,F)] interface. +** +** The SQLITE_DESERIALIZE_FREEONCLOSE means that the database serialization +** in the P argument is held in memory obtained from [sqlite3_malloc64()] +** and that SQLite should take ownership of this memory and automatically +** free it when it has finished using it. Without this flag, the caller +** is responsible for freeing any dynamically allocated memory. +** +** The SQLITE_DESERIALIZE_RESIZEABLE flag means that SQLite is allowed to +** grow the size of the database using calls to [sqlite3_realloc64()]. This +** flag should only be used if SQLITE_DESERIALIZE_FREEONCLOSE is also used. +** Without this flag, the deserialized database cannot increase in size beyond +** the number of bytes specified by the M parameter. +** +** The SQLITE_DESERIALIZE_READONLY flag means that the deserialized database +** should be treated as read-only. +*/ +#define SQLITE_DESERIALIZE_FREEONCLOSE 1 /* Call sqlite3_free() on close */ +#define SQLITE_DESERIALIZE_RESIZEABLE 2 /* Resize using sqlite3_realloc64() */ +#define SQLITE_DESERIALIZE_READONLY 4 /* Database is read-only */ + +/* ** Undo the hack that converts floating point types to integer for ** builds on processors without floating point support. */ @@ -9829,7 +10464,7 @@ sqlite3_int64 iRowid; /* Rowid for current entry */ sqlite3_rtree_dbl rParentScore; /* Score of parent node */ int eParentWithin; /* Visibility of parent node */ - int eWithin; /* OUT: Visiblity */ + int eWithin; /* OUT: Visibility */ sqlite3_rtree_dbl rScore; /* OUT: Write the score here */ /* The following fields are only available in 3.8.11 and later */ sqlite3_value **apSqlParam; /* Original SQL values of parameters */ @@ -9865,16 +10500,23 @@ /* ** CAPI3REF: Session Object Handle +** +** An instance of this object is a [session] that can be used to +** record changes to a database. */ typedef struct sqlite3_session sqlite3_session; /* ** CAPI3REF: Changeset Iterator Handle +** +** An instance of this object acts as a cursor for iterating +** over the elements of a [changeset] or [patchset]. */ typedef struct sqlite3_changeset_iter sqlite3_changeset_iter; /* ** CAPI3REF: Create A New Session Object +** CONSTRUCTOR: sqlite3_session ** ** Create a new session object attached to database handle db. If successful, ** a pointer to the new object is written to *ppSession and SQLITE_OK is @@ -9911,6 +10553,7 @@ /* ** CAPI3REF: Delete A Session Object +** DESTRUCTOR: sqlite3_session ** ** Delete a session object previously allocated using ** [sqlite3session_create()]. Once a session object has been deleted, the @@ -9926,6 +10569,7 @@ /* ** CAPI3REF: Enable Or Disable A Session Object +** METHOD: sqlite3_session ** ** Enable or disable the recording of changes by a session object. When ** enabled, a session object records changes made to the database. When @@ -9945,6 +10589,7 @@ /* ** CAPI3REF: Set Or Clear the Indirect Change Flag +** METHOD: sqlite3_session ** ** Each change recorded by a session object is marked as either direct or ** indirect. A change is marked as indirect if either: @@ -9974,6 +10619,7 @@ /* ** CAPI3REF: Attach A Table To A Session Object +** METHOD: sqlite3_session ** ** If argument zTab is not NULL, then it is the name of a table to attach ** to the session object passed as the first argument. All subsequent changes @@ -9999,6 +10645,35 @@ ** ** SQLITE_OK is returned if the call completes without error. Or, if an error ** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned. +** +**

      Special sqlite_stat1 Handling

      +** +** As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to +** some of the rules above. In SQLite, the schema of sqlite_stat1 is: +** 
      +**        CREATE TABLE sqlite_stat1(tbl,idx,stat)  
+**
      +** +** Even though sqlite_stat1 does not have a PRIMARY KEY, changes are +** recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes +** are recorded for rows for which (idx IS NULL) is true. However, for such +** rows a zero-length blob (SQL value X'') is stored in the changeset or +** patchset instead of a NULL value. This allows such changesets to be +** manipulated by legacy implementations of sqlite3changeset_invert(), +** concat() and similar. +** +** The sqlite3changeset_apply() function automatically converts the +** zero-length blob back to a NULL value when updating the sqlite_stat1 +** table. However, if the application calls sqlite3changeset_new(), +** sqlite3changeset_old() or sqlite3changeset_conflict on a changeset +** iterator directly (including on a changeset iterator passed to a +** conflict-handler callback) then the X'' value is returned. The application +** must translate X'' to NULL itself if required. +** +** Legacy (older than 3.22.0) versions of the sessions module cannot capture +** changes made to the sqlite_stat1 table. Legacy versions of the +** sqlite3changeset_apply() function silently ignore any modifications to the +** sqlite_stat1 table that are part of a changeset or patchset. */ SQLITE_API int sqlite3session_attach( sqlite3_session *pSession, /* Session object */ @@ -10007,6 +10682,7 @@ /* ** CAPI3REF: Set a table filter on a Session Object. +** METHOD: sqlite3_session ** ** The second argument (xFilter) is the "filter callback". For changes to rows ** in tables that are not attached to the Session object, the filter is called @@ -10025,6 +10701,7 @@ /* ** CAPI3REF: Generate A Changeset From A Session Object +** METHOD: sqlite3_session ** ** Obtain a changeset containing changes to the tables attached to the ** session object passed as the first argument. If successful, @@ -10134,7 +10811,8 @@ ); /* -** CAPI3REF: Load The Difference Between Tables Into A Session +** CAPI3REF: Load The Difference Between Tables Into A Session +** METHOD: sqlite3_session ** ** If it is not already attached to the session object passed as the first ** argument, this function attaches table zTbl in the same manner as the @@ -10199,6 +10877,7 @@ /* ** CAPI3REF: Generate A Patchset From A Session Object +** METHOD: sqlite3_session ** ** The differences between a patchset and a changeset are that: ** @@ -10227,8 +10906,8 @@ */ SQLITE_API int sqlite3session_patchset( sqlite3_session *pSession, /* Session object */ - int *pnPatchset, /* OUT: Size of buffer at *ppChangeset */ - void **ppPatchset /* OUT: Buffer containing changeset */ + int *pnPatchset, /* OUT: Size of buffer at *ppPatchset */ + void **ppPatchset /* OUT: Buffer containing patchset */ ); /* @@ -10250,6 +10929,7 @@ /* ** CAPI3REF: Create An Iterator To Traverse A Changeset +** CONSTRUCTOR: sqlite3_changeset_iter ** ** Create an iterator used to iterate through the contents of a changeset. ** If successful, *pp is set to point to the iterator handle and SQLITE_OK @@ -10280,6 +10960,13 @@ ** consecutively. There is no chance that the iterator will visit a change ** the applies to table X, then one for table Y, and then later on visit ** another change for table X. +** +** The behavior of sqlite3changeset_start_v2() and its streaming equivalent +** may be modified by passing a combination of +** [SQLITE_CHANGESETSTART_INVERT | supported flags] as the 4th parameter. +** +** Note that the sqlite3changeset_start_v2() API is still experimental +** and therefore subject to change. */ SQLITE_API int sqlite3changeset_start( sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */ @@ -10286,10 +10973,30 @@ int nChangeset, /* Size of changeset blob in bytes */ void *pChangeset /* Pointer to blob containing changeset */ ); +SQLITE_API int sqlite3changeset_start_v2( + sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */ + int nChangeset, /* Size of changeset blob in bytes */ + void *pChangeset, /* Pointer to blob containing changeset */ + int flags /* SESSION_CHANGESETSTART_* flags */ +); +/* +** CAPI3REF: Flags for sqlite3changeset_start_v2 +** +** The following flags may passed via the 4th parameter to +** [sqlite3changeset_start_v2] and [sqlite3changeset_start_v2_strm]: +** +**
      SQLITE_CHANGESETAPPLY_INVERT
      +** Invert the changeset while iterating through it. This is equivalent to +** inverting a changeset using sqlite3changeset_invert() before applying it. +** It is an error to specify this flag with a patchset. +*/ +#define SQLITE_CHANGESETSTART_INVERT 0x0002 + /* ** CAPI3REF: Advance A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function may only be used with iterators created by function ** [sqlite3changeset_start()]. If it is called on an iterator passed to @@ -10314,6 +11021,7 @@ /* ** CAPI3REF: Obtain The Current Operation From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -10348,6 +11056,7 @@ /* ** CAPI3REF: Obtain The Primary Key Definition Of A Table +** METHOD: sqlite3_changeset_iter ** ** For each modified table, a changeset includes the following: ** @@ -10379,6 +11088,7 @@ /* ** CAPI3REF: Obtain old.* Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -10409,6 +11119,7 @@ /* ** CAPI3REF: Obtain new.* Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -10442,6 +11153,7 @@ /* ** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function should only be used with iterator objects passed to a ** conflict-handler callback by [sqlite3changeset_apply()] with either @@ -10469,6 +11181,7 @@ /* ** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations +** METHOD: sqlite3_changeset_iter ** ** This function may only be called with an iterator passed to an ** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case @@ -10485,6 +11198,7 @@ /* ** CAPI3REF: Finalize A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function is used to finalize an iterator allocated with ** [sqlite3changeset_start()]. @@ -10501,6 +11215,7 @@ ** to that error is returned by this function. Otherwise, SQLITE_OK is ** returned. This is to allow the following pattern (pseudo-code): ** +** 
       **   sqlite3changeset_start();
 **   while( SQLITE_ROW==sqlite3changeset_next() ){
 **     // Do something with change.
@@ -10509,6 +11224,7 @@
 **   if( rc!=SQLITE_OK ){
 **     // An error has occurred 
 **   }
+**
      */ SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter); @@ -10556,6 +11272,7 @@ ** sqlite3_changegroup object. Calling it produces similar results as the ** following code fragment: ** +** 
       **   sqlite3_changegroup *pGrp;
 **   rc = sqlite3_changegroup_new(&pGrp);
 **   if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
@@ -10566,6 +11283,7 @@
 **     *ppOut = 0;
 **     *pnOut = 0;
 **   }
+**
      ** ** Refer to the sqlite3_changegroup documentation below for details. */ @@ -10581,11 +11299,15 @@ /* ** CAPI3REF: Changegroup Handle +** +** A changegroup is an object used to combine two or more +** [changesets] or [patchsets] */ typedef struct sqlite3_changegroup sqlite3_changegroup; /* ** CAPI3REF: Create A New Changegroup Object +** CONSTRUCTOR: sqlite3_changegroup ** ** An sqlite3_changegroup object is used to combine two or more changesets ** (or patchsets) into a single changeset (or patchset). A single changegroup @@ -10623,6 +11345,7 @@ /* ** CAPI3REF: Add A Changeset To A Changegroup +** METHOD: sqlite3_changegroup ** ** Add all changes within the changeset (or patchset) in buffer pData (size ** nData bytes) to the changegroup. @@ -10700,6 +11423,7 @@ /* ** CAPI3REF: Obtain A Composite Changeset From A Changegroup +** METHOD: sqlite3_changegroup ** ** Obtain a buffer containing a changeset (or patchset) representing the ** current contents of the changegroup. If the inputs to the changegroup @@ -10730,6 +11454,7 @@ /* ** CAPI3REF: Delete A Changegroup Object +** DESTRUCTOR: sqlite3_changegroup */ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*); @@ -10736,19 +11461,18 @@ /* ** CAPI3REF: Apply A Changeset To A Database ** -** Apply a changeset to a database. This function attempts to update the -** "main" database attached to handle db with the changes found in the -** changeset passed via the second and third arguments. +** Apply a changeset or patchset to a database. These functions attempt to +** update the "main" database attached to handle db with the changes found in +** the changeset passed via the second and third arguments. ** -** The fourth argument (xFilter) passed to this function is the "filter +** The fourth argument (xFilter) passed to these functions is the "filter ** callback". If it is not NULL, then for each table affected by at least one ** change in the changeset, the filter callback is invoked with ** the table name as the second argument, and a copy of the context pointer -** passed as the sixth argument to this function as the first. If the "filter -** callback" returns zero, then no attempt is made to apply any changes to -** the table. Otherwise, if the return value is non-zero or the xFilter -** argument to this function is NULL, all changes related to the table are -** attempted. +** passed as the sixth argument as the first. If the "filter callback" +** returns zero, then no attempt is made to apply any changes to the table. +** Otherwise, if the return value is non-zero or the xFilter argument to +** is NULL, all changes related to the table are attempted. ** ** For each table that is not excluded by the filter callback, this function ** tests that the target database contains a compatible table. A table is @@ -10793,7 +11517,7 @@ ** **
      **
      DELETE Changes
      -** For each DELETE change, this function checks if the target database +** For each DELETE change, the function checks if the target database ** contains a row with the same primary key value (or values) as the ** original row values stored in the changeset. If it does, and the values ** stored in all non-primary key columns also match the values stored in @@ -10838,7 +11562,7 @@ ** [SQLITE_CHANGESET_REPLACE]. ** **
      UPDATE Changes
      -** For each UPDATE change, this function checks if the target database +** For each UPDATE change, the function checks if the target database ** contains a row with the same primary key value (or values) as the ** original row values stored in the changeset. If it does, and the values ** stored in all modified non-primary key columns also match the values @@ -10869,11 +11593,28 @@ ** This can be used to further customize the applications conflict ** resolution strategy. ** -** All changes made by this function are enclosed in a savepoint transaction. +** All changes made by these functions are enclosed in a savepoint transaction. ** If any other error (aside from a constraint failure when attempting to ** write to the target database) occurs, then the savepoint transaction is ** rolled back, restoring the target database to its original state, and an ** SQLite error code returned. +** +** If the output parameters (ppRebase) and (pnRebase) are non-NULL and +** the input is a changeset (not a patchset), then sqlite3changeset_apply_v2() +** may set (*ppRebase) to point to a "rebase" that may be used with the +** sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase) +** is set to the size of the buffer in bytes. It is the responsibility of the +** caller to eventually free any such buffer using sqlite3_free(). The buffer +** is only allocated and populated if one or more conflicts were encountered +** while applying the patchset. See comments surrounding the sqlite3_rebaser +** APIs for further details. +** +** The behavior of sqlite3changeset_apply_v2() and its streaming equivalent +** may be modified by passing a combination of +** [SQLITE_CHANGESETAPPLY_NOSAVEPOINT | supported flags] as the 9th parameter. +** +** Note that the sqlite3changeset_apply_v2() API is still experimental +** and therefore subject to change. */ SQLITE_API int sqlite3changeset_apply( sqlite3 *db, /* Apply change to "main" db of this handle */ @@ -10890,7 +11631,48 @@ ), void *pCtx /* First argument passed to xConflict */ ); +SQLITE_API int sqlite3changeset_apply_v2( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int nChangeset, /* Size of changeset in bytes */ + void *pChangeset, /* Changeset blob */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, /* OUT: Rebase data */ + int flags /* SESSION_CHANGESETAPPLY_* flags */ +); +/* +** CAPI3REF: Flags for sqlite3changeset_apply_v2 +** +** The following flags may passed via the 9th parameter to +** [sqlite3changeset_apply_v2] and [sqlite3changeset_apply_v2_strm]: +** +**
      +**
      SQLITE_CHANGESETAPPLY_NOSAVEPOINT
      +** Usually, the sessions module encloses all operations performed by +** a single call to apply_v2() or apply_v2_strm() in a [SAVEPOINT]. The +** SAVEPOINT is committed if the changeset or patchset is successfully +** applied, or rolled back if an error occurs. Specifying this flag +** causes the sessions module to omit this savepoint. In this case, if the +** caller has an open transaction or savepoint when apply_v2() is called, +** it may revert the partially applied changeset by rolling it back. +** +**
      SQLITE_CHANGESETAPPLY_INVERT
      +** Invert the changeset before applying it. This is equivalent to inverting +** a changeset using sqlite3changeset_invert() before applying it. It is +** an error to specify this flag with a patchset. +*/ +#define SQLITE_CHANGESETAPPLY_NOSAVEPOINT 0x0001 +#define SQLITE_CHANGESETAPPLY_INVERT 0x0002 + /* ** CAPI3REF: Constants Passed To The Conflict Handler ** @@ -10987,7 +11769,162 @@ #define SQLITE_CHANGESET_REPLACE 1 #define SQLITE_CHANGESET_ABORT 2 +/* +** CAPI3REF: Rebasing changesets +** EXPERIMENTAL +** +** Suppose there is a site hosting a database in state S0. And that +** modifications are made that move that database to state S1 and a +** changeset recorded (the "local" changeset). Then, a changeset based +** on S0 is received from another site (the "remote" changeset) and +** applied to the database. The database is then in state +** (S1+"remote"), where the exact state depends on any conflict +** resolution decisions (OMIT or REPLACE) made while applying "remote". +** Rebasing a changeset is to update it to take those conflict +** resolution decisions into account, so that the same conflicts +** do not have to be resolved elsewhere in the network. +** +** For example, if both the local and remote changesets contain an +** INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)": +** +** local: INSERT INTO t1 VALUES(1, 'v1'); +** remote: INSERT INTO t1 VALUES(1, 'v2'); +** +** and the conflict resolution is REPLACE, then the INSERT change is +** removed from the local changeset (it was overridden). Or, if the +** conflict resolution was "OMIT", then the local changeset is modified +** to instead contain: +** +** UPDATE t1 SET b = 'v2' WHERE a=1; +** +** Changes within the local changeset are rebased as follows: +** +**
      +**
      Local INSERT
      +** This may only conflict with a remote INSERT. If the conflict +** resolution was OMIT, then add an UPDATE change to the rebased +** changeset. Or, if the conflict resolution was REPLACE, add +** nothing to the rebased changeset. +** +**
      Local DELETE
      +** This may conflict with a remote UPDATE or DELETE. In both cases the +** only possible resolution is OMIT. If the remote operation was a +** DELETE, then add no change to the rebased changeset. If the remote +** operation was an UPDATE, then the old.* fields of change are updated +** to reflect the new.* values in the UPDATE. +** +**
      Local UPDATE
      +** This may conflict with a remote UPDATE or DELETE. If it conflicts +** with a DELETE, and the conflict resolution was OMIT, then the update +** is changed into an INSERT. Any undefined values in the new.* record +** from the update change are filled in using the old.* values from +** the conflicting DELETE. Or, if the conflict resolution was REPLACE, +** the UPDATE change is simply omitted from the rebased changeset. +** +** If conflict is with a remote UPDATE and the resolution is OMIT, then +** the old.* values are rebased using the new.* values in the remote +** change. Or, if the resolution is REPLACE, then the change is copied +** into the rebased changeset with updates to columns also updated by +** the conflicting remote UPDATE removed. If this means no columns would +** be updated, the change is omitted. +**
      +** +** A local change may be rebased against multiple remote changes +** simultaneously. If a single key is modified by multiple remote +** changesets, they are combined as follows before the local changeset +** is rebased: +** +**
        +**
      • If there has been one or more REPLACE resolutions on a +** key, it is rebased according to a REPLACE. +** +**
      • If there have been no REPLACE resolutions on a key, then +** the local changeset is rebased according to the most recent +** of the OMIT resolutions. +**
      +** +** Note that conflict resolutions from multiple remote changesets are +** combined on a per-field basis, not per-row. This means that in the +** case of multiple remote UPDATE operations, some fields of a single +** local change may be rebased for REPLACE while others are rebased for +** OMIT. +** +** In order to rebase a local changeset, the remote changeset must first +** be applied to the local database using sqlite3changeset_apply_v2() and +** the buffer of rebase information captured. Then: +** +**
        +**
      1. An sqlite3_rebaser object is created by calling +** sqlite3rebaser_create(). +**
      2. The new object is configured with the rebase buffer obtained from +** sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure(). +** If the local changeset is to be rebased against multiple remote +** changesets, then sqlite3rebaser_configure() should be called +** multiple times, in the same order that the multiple +** sqlite3changeset_apply_v2() calls were made. +**
      3. Each local changeset is rebased by calling sqlite3rebaser_rebase(). +**
      4. The sqlite3_rebaser object is deleted by calling +** sqlite3rebaser_delete(). +**
      +*/ +typedef struct sqlite3_rebaser sqlite3_rebaser; + /* +** CAPI3REF: Create a changeset rebaser object. +** EXPERIMENTAL +** +** Allocate a new changeset rebaser object. If successful, set (*ppNew) to +** point to the new object and return SQLITE_OK. Otherwise, if an error +** occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew) +** to NULL. +*/ +SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew); + +/* +** CAPI3REF: Configure a changeset rebaser object. +** EXPERIMENTAL +** +** Configure the changeset rebaser object to rebase changesets according +** to the conflict resolutions described by buffer pRebase (size nRebase +** bytes), which must have been obtained from a previous call to +** sqlite3changeset_apply_v2(). +*/ +SQLITE_API int sqlite3rebaser_configure( + sqlite3_rebaser*, + int nRebase, const void *pRebase +); + +/* +** CAPI3REF: Rebase a changeset +** EXPERIMENTAL +** +** Argument pIn must point to a buffer containing a changeset nIn bytes +** in size. This function allocates and populates a buffer with a copy +** of the changeset rebased rebased according to the configuration of the +** rebaser object passed as the first argument. If successful, (*ppOut) +** is set to point to the new buffer containing the rebased changset and +** (*pnOut) to its size in bytes and SQLITE_OK returned. It is the +** responsibility of the caller to eventually free the new buffer using +** sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut) +** are set to zero and an SQLite error code returned. +*/ +SQLITE_API int sqlite3rebaser_rebase( + sqlite3_rebaser*, + int nIn, const void *pIn, + int *pnOut, void **ppOut +); + +/* +** CAPI3REF: Delete a changeset rebaser object. +** EXPERIMENTAL +** +** Delete the changeset rebaser object and all associated resources. There +** should be one call to this function for each successful invocation +** of sqlite3rebaser_create(). +*/ +SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p); + +/* ** CAPI3REF: Streaming Versions of API functions. ** ** The six streaming API xxx_strm() functions serve similar purposes to the @@ -10995,12 +11932,13 @@ ** ** ** -**
      Streaming functionNon-streaming equivalent
      sqlite3changeset_apply_str[sqlite3changeset_apply] -**
      sqlite3changeset_concat_str[sqlite3changeset_concat] -**
      sqlite3changeset_invert_str[sqlite3changeset_invert] -**
      sqlite3changeset_start_str[sqlite3changeset_start] -**
      sqlite3session_changeset_str[sqlite3session_changeset] -**
      sqlite3session_patchset_str[sqlite3session_patchset] +**
      sqlite3changeset_apply_strm[sqlite3changeset_apply] +**
      sqlite3changeset_apply_strm_v2[sqlite3changeset_apply_v2] +**
      sqlite3changeset_concat_strm[sqlite3changeset_concat] +**
      sqlite3changeset_invert_strm[sqlite3changeset_invert] +**
      sqlite3changeset_start_strm[sqlite3changeset_start] +**
      sqlite3session_changeset_strm[sqlite3session_changeset] +**
      sqlite3session_patchset_strm[sqlite3session_patchset] **
      ** ** Non-streaming functions that accept changesets (or patchsets) as input @@ -11091,6 +12029,23 @@ ), void *pCtx /* First argument passed to xConflict */ ); +SQLITE_API int sqlite3changeset_apply_v2_strm( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */ + void *pIn, /* First arg for xInput */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, + int flags +); SQLITE_API int sqlite3changeset_concat_strm( int (*xInputA)(void *pIn, void *pData, int *pnData), void *pInA, @@ -11110,6 +12065,12 @@ int (*xInput)(void *pIn, void *pData, int *pnData), void *pIn ); +SQLITE_API int sqlite3changeset_start_v2_strm( + sqlite3_changeset_iter **pp, + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int flags +); SQLITE_API int sqlite3session_changeset_strm( sqlite3_session *pSession, int (*xOutput)(void *pOut, const void *pData, int nData), @@ -11128,9 +12089,55 @@ int (*xOutput)(void *pOut, const void *pData, int nData), void *pOut ); +SQLITE_API int sqlite3rebaser_rebase_strm( + sqlite3_rebaser *pRebaser, + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int (*xOutput)(void *pOut, const void *pData, int nData), + void *pOut +); +/* +** CAPI3REF: Configure global parameters +** +** The sqlite3session_config() interface is used to make global configuration +** changes to the sessions module in order to tune it to the specific needs +** of the application. +** +** The sqlite3session_config() interface is not threadsafe. If it is invoked +** while any other thread is inside any other sessions method then the +** results are undefined. Furthermore, if it is invoked after any sessions +** related objects have been created, the results are also undefined. +** +** The first argument to the sqlite3session_config() function must be one +** of the SQLITE_SESSION_CONFIG_XXX constants defined below. The +** interpretation of the (void*) value passed as the second parameter and +** the effect of calling this function depends on the value of the first +** parameter. +** +**
      +**
      SQLITE_SESSION_CONFIG_STRMSIZE
      +** By default, the sessions module streaming interfaces attempt to input +** and output data in approximately 1 KiB chunks. This operand may be used +** to set and query the value of this configuration setting. The pointer +** passed as the second argument must point to a value of type (int). +** If this value is greater than 0, it is used as the new streaming data +** chunk size for both input and output. Before returning, the (int) value +** pointed to by pArg is set to the final value of the streaming interface +** chunk size. +**
      +** +** This function returns SQLITE_OK if successful, or an SQLite error code +** otherwise. +*/ +SQLITE_API int sqlite3session_config(int op, void *pArg); /* +** CAPI3REF: Values for sqlite3session_config(). +*/ +#define SQLITE_SESSION_CONFIG_STRMSIZE 1 + +/* ** Make sure we can call this stuff from C++. */ #if 0 @@ -11586,7 +12593,7 @@ ** This way, even if the tokenizer does not provide synonyms ** when tokenizing query text (it should not - to do would be ** inefficient), it doesn't matter if the user queries for -** 'first + place' or '1st + place', as there are entires in the +** 'first + place' or '1st + place', as there are entries in the ** FTS index corresponding to both forms of the first token. ** ** @@ -11614,7 +12621,7 @@ ** extra data to the FTS index or require FTS5 to query for multiple terms, ** so it is efficient in terms of disk space and query speed. However, it ** does not support prefix queries very well. If, as suggested above, the -** token "first" is subsituted for "1st" by the tokenizer, then the query: +** token "first" is substituted for "1st" by the tokenizer, then the query: ** ** ** ... MATCH '1s*' @@ -12221,6 +13228,21 @@ #endif /* +** Some conditionals are optimizations only. In other words, if the +** conditionals are replaced with a constant 1 (true) or 0 (false) then +** the correct answer is still obtained, though perhaps not as quickly. +** +** The following macros mark these optimizations conditionals. +*/ +#if defined(SQLITE_MUTATION_TEST) +# define OK_IF_ALWAYS_TRUE(X) (1) +# define OK_IF_ALWAYS_FALSE(X) (0) +#else +# define OK_IF_ALWAYS_TRUE(X) (X) +# define OK_IF_ALWAYS_FALSE(X) (X) +#endif + +/* ** Some malloc failures are only possible if SQLITE_TEST_REALLOC_STRESS is ** defined. We need to defend against those failures when testing with ** SQLITE_TEST_REALLOC_STRESS, but we don't want the unreachable branches @@ -12414,144 +13436,153 @@ #define TK_AS 24 #define TK_WITHOUT 25 #define TK_COMMA 26 -#define TK_ID 27 -#define TK_ABORT 28 -#define TK_ACTION 29 -#define TK_AFTER 30 -#define TK_ANALYZE 31 -#define TK_ASC 32 -#define TK_ATTACH 33 -#define TK_BEFORE 34 -#define TK_BY 35 -#define TK_CASCADE 36 -#define TK_CAST 37 -#define TK_COLUMNKW 38 -#define TK_CONFLICT 39 -#define TK_DATABASE 40 -#define TK_DESC 41 -#define TK_DETACH 42 -#define TK_EACH 43 -#define TK_FAIL 44 -#define TK_FOR 45 -#define TK_IGNORE 46 -#define TK_INITIALLY 47 -#define TK_INSTEAD 48 -#define TK_LIKE_KW 49 -#define TK_MATCH 50 -#define TK_NO 51 -#define TK_KEY 52 -#define TK_OF 53 -#define TK_OFFSET 54 -#define TK_PRAGMA 55 -#define TK_RAISE 56 -#define TK_RECURSIVE 57 -#define TK_REPLACE 58 -#define TK_RESTRICT 59 -#define TK_ROW 60 -#define TK_TRIGGER 61 -#define TK_VACUUM 62 -#define TK_VIEW 63 -#define TK_VIRTUAL 64 -#define TK_WITH 65 -#define TK_REINDEX 66 -#define TK_RENAME 67 -#define TK_CTIME_KW 68 -#define TK_ANY 69 -#define TK_OR 70 -#define TK_AND 71 -#define TK_IS 72 -#define TK_BETWEEN 73 -#define TK_IN 74 -#define TK_ISNULL 75 -#define TK_NOTNULL 76 -#define TK_NE 77 -#define TK_EQ 78 -#define TK_GT 79 -#define TK_LE 80 -#define TK_LT 81 -#define TK_GE 82 -#define TK_ESCAPE 83 -#define TK_BITAND 84 -#define TK_BITOR 85 -#define TK_LSHIFT 86 -#define TK_RSHIFT 87 -#define TK_PLUS 88 -#define TK_MINUS 89 -#define TK_STAR 90 -#define TK_SLASH 91 -#define TK_REM 92 -#define TK_CONCAT 93 -#define TK_COLLATE 94 -#define TK_BITNOT 95 -#define TK_INDEXED 96 -#define TK_STRING 97 -#define TK_JOIN_KW 98 -#define TK_CONSTRAINT 99 -#define TK_DEFAULT 100 -#define TK_NULL 101 -#define TK_PRIMARY 102 -#define TK_UNIQUE 103 -#define TK_CHECK 104 -#define TK_REFERENCES 105 -#define TK_AUTOINCR 106 -#define TK_ON 107 -#define TK_INSERT 108 -#define TK_DELETE 109 -#define TK_UPDATE 110 -#define TK_SET 111 -#define TK_DEFERRABLE 112 -#define TK_FOREIGN 113 -#define TK_DROP 114 -#define TK_UNION 115 -#define TK_ALL 116 -#define TK_EXCEPT 117 -#define TK_INTERSECT 118 -#define TK_SELECT 119 -#define TK_VALUES 120 -#define TK_DISTINCT 121 -#define TK_DOT 122 -#define TK_FROM 123 -#define TK_JOIN 124 -#define TK_USING 125 -#define TK_ORDER 126 -#define TK_GROUP 127 -#define TK_HAVING 128 -#define TK_LIMIT 129 -#define TK_WHERE 130 -#define TK_INTO 131 -#define TK_FLOAT 132 -#define TK_BLOB 133 -#define TK_INTEGER 134 -#define TK_VARIABLE 135 -#define TK_CASE 136 -#define TK_WHEN 137 -#define TK_THEN 138 -#define TK_ELSE 139 -#define TK_INDEX 140 -#define TK_ALTER 141 -#define TK_ADD 142 -#define TK_TO_TEXT 143 -#define TK_TO_BLOB 144 -#define TK_TO_NUMERIC 145 -#define TK_TO_INT 146 -#define TK_TO_REAL 147 -#define TK_ISNOT 148 -#define TK_END_OF_FILE 149 -#define TK_UNCLOSED_STRING 150 -#define TK_FUNCTION 151 -#define TK_COLUMN 152 -#define TK_AGG_FUNCTION 153 -#define TK_AGG_COLUMN 154 -#define TK_UMINUS 155 -#define TK_UPLUS 156 -#define TK_REGISTER 157 -#define TK_VECTOR 158 -#define TK_SELECT_COLUMN 159 -#define TK_IF_NULL_ROW 160 -#define TK_ASTERISK 161 -#define TK_SPAN 162 -#define TK_SPACE 163 -#define TK_ILLEGAL 164 +#define TK_ABORT 27 +#define TK_ACTION 28 +#define TK_AFTER 29 +#define TK_ANALYZE 30 +#define TK_ASC 31 +#define TK_ATTACH 32 +#define TK_BEFORE 33 +#define TK_BY 34 +#define TK_CASCADE 35 +#define TK_CAST 36 +#define TK_CONFLICT 37 +#define TK_DATABASE 38 +#define TK_DESC 39 +#define TK_DETACH 40 +#define TK_EACH 41 +#define TK_FAIL 42 +#define TK_OR 43 +#define TK_AND 44 +#define TK_IS 45 +#define TK_MATCH 46 +#define TK_LIKE_KW 47 +#define TK_BETWEEN 48 +#define TK_IN 49 +#define TK_ISNULL 50 +#define TK_NOTNULL 51 +#define TK_NE 52 +#define TK_EQ 53 +#define TK_GT 54 +#define TK_LE 55 +#define TK_LT 56 +#define TK_GE 57 +#define TK_ESCAPE 58 +#define TK_ID 59 +#define TK_COLUMNKW 60 +#define TK_DO 61 +#define TK_FOR 62 +#define TK_IGNORE 63 +#define TK_INITIALLY 64 +#define TK_INSTEAD 65 +#define TK_NO 66 +#define TK_KEY 67 +#define TK_OF 68 +#define TK_OFFSET 69 +#define TK_PRAGMA 70 +#define TK_RAISE 71 +#define TK_RECURSIVE 72 +#define TK_REPLACE 73 +#define TK_RESTRICT 74 +#define TK_ROW 75 +#define TK_ROWS 76 +#define TK_TRIGGER 77 +#define TK_VACUUM 78 +#define TK_VIEW 79 +#define TK_VIRTUAL 80 +#define TK_WITH 81 +#define TK_CURRENT 82 +#define TK_FOLLOWING 83 +#define TK_PARTITION 84 +#define TK_PRECEDING 85 +#define TK_RANGE 86 +#define TK_UNBOUNDED 87 +#define TK_REINDEX 88 +#define TK_RENAME 89 +#define TK_CTIME_KW 90 +#define TK_ANY 91 +#define TK_BITAND 92 +#define TK_BITOR 93 +#define TK_LSHIFT 94 +#define TK_RSHIFT 95 +#define TK_PLUS 96 +#define TK_MINUS 97 +#define TK_STAR 98 +#define TK_SLASH 99 +#define TK_REM 100 +#define TK_CONCAT 101 +#define TK_COLLATE 102 +#define TK_BITNOT 103 +#define TK_ON 104 +#define TK_INDEXED 105 +#define TK_STRING 106 +#define TK_JOIN_KW 107 +#define TK_CONSTRAINT 108 +#define TK_DEFAULT 109 +#define TK_NULL 110 +#define TK_PRIMARY 111 +#define TK_UNIQUE 112 +#define TK_CHECK 113 +#define TK_REFERENCES 114 +#define TK_AUTOINCR 115 +#define TK_INSERT 116 +#define TK_DELETE 117 +#define TK_UPDATE 118 +#define TK_SET 119 +#define TK_DEFERRABLE 120 +#define TK_FOREIGN 121 +#define TK_DROP 122 +#define TK_UNION 123 +#define TK_ALL 124 +#define TK_EXCEPT 125 +#define TK_INTERSECT 126 +#define TK_SELECT 127 +#define TK_VALUES 128 +#define TK_DISTINCT 129 +#define TK_DOT 130 +#define TK_FROM 131 +#define TK_JOIN 132 +#define TK_USING 133 +#define TK_ORDER 134 +#define TK_GROUP 135 +#define TK_HAVING 136 +#define TK_LIMIT 137 +#define TK_WHERE 138 +#define TK_INTO 139 +#define TK_NOTHING 140 +#define TK_FLOAT 141 +#define TK_BLOB 142 +#define TK_INTEGER 143 +#define TK_VARIABLE 144 +#define TK_CASE 145 +#define TK_WHEN 146 +#define TK_THEN 147 +#define TK_ELSE 148 +#define TK_INDEX 149 +#define TK_ALTER 150 +#define TK_ADD 151 +#define TK_WINDOW 152 +#define TK_OVER 153 +#define TK_FILTER 154 +#define TK_TRUEFALSE 155 +#define TK_ISNOT 156 +#define TK_FUNCTION 157 +#define TK_COLUMN 158 +#define TK_AGG_FUNCTION 159 +#define TK_AGG_COLUMN 160 +#define TK_UMINUS 161 +#define TK_UPLUS 162 +#define TK_TRUTH 163 +#define TK_REGISTER 164 +#define TK_VECTOR 165 +#define TK_SELECT_COLUMN 166 +#define TK_IF_NULL_ROW 167 +#define TK_ASTERISK 168 +#define TK_SPAN 169 +#define TK_END_OF_FILE 170 +#define TK_UNCLOSED_STRING 171 +#define TK_SPACE 172 +#define TK_ILLEGAL 173 /* The token codes above must all fit in 8 bits */ #define TKFLG_MASK 0xff @@ -12672,6 +13703,22 @@ #endif /* +** Default value for the SQLITE_CONFIG_SORTERREF_SIZE option. +*/ +#ifndef SQLITE_DEFAULT_SORTERREF_SIZE +# define SQLITE_DEFAULT_SORTERREF_SIZE 0x7fffffff +#endif + +/* +** The compile-time options SQLITE_MMAP_READWRITE and +** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another. +** You must choose one or the other (or neither) but not both. +*/ +#if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) +#error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE +#endif + +/* ** GCC does not define the offsetof() macro so we'll have to do it ** ourselves. */ @@ -12809,7 +13856,8 @@ # if defined(__SIZEOF_POINTER__) # define SQLITE_PTRSIZE __SIZEOF_POINTER__ # elif defined(i386) || defined(__i386__) || defined(_M_IX86) || \ - defined(_M_ARM) || defined(__arm__) || defined(__x86) + defined(_M_ARM) || defined(__arm__) || defined(__x86) || \ + (defined(__TOS_AIX__) && !defined(__64BIT__)) # define SQLITE_PTRSIZE 4 # else # define SQLITE_PTRSIZE 8 @@ -12850,7 +13898,7 @@ # if defined(i386) || defined(__i386__) || defined(_M_IX86) || \ defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \ defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \ - defined(__arm__) + defined(__arm__) || defined(_M_ARM64) # define SQLITE_BYTEORDER 1234 # elif defined(sparc) || defined(__ppc__) # define SQLITE_BYTEORDER 4321 @@ -12969,7 +14017,7 @@ ** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not ** the Select query generator tracing logic is turned on. */ -#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_SELECTTRACE) +#if defined(SQLITE_ENABLE_SELECTTRACE) # define SELECTTRACE_ENABLED 1 #else # define SELECTTRACE_ENABLED 0 @@ -12986,9 +14034,10 @@ */ typedef struct BusyHandler BusyHandler; struct BusyHandler { - int (*xFunc)(void *,int); /* The busy callback */ - void *pArg; /* First arg to busy callback */ - int nBusy; /* Incremented with each busy call */ + int (*xBusyHandler)(void *,int); /* The busy callback */ + void *pBusyArg; /* First arg to busy callback */ + int nBusy; /* Incremented with each busy call */ + u8 bExtraFileArg; /* Include sqlite3_file as callback arg */ }; /* @@ -13088,7 +14137,6 @@ typedef struct Schema Schema; typedef struct Expr Expr; typedef struct ExprList ExprList; -typedef struct ExprSpan ExprSpan; typedef struct FKey FKey; typedef struct FuncDestructor FuncDestructor; typedef struct FuncDef FuncDef; @@ -13105,6 +14153,7 @@ typedef struct Parse Parse; typedef struct PreUpdate PreUpdate; typedef struct PrintfArguments PrintfArguments; +typedef struct RenameToken RenameToken; typedef struct RowSet RowSet; typedef struct Savepoint Savepoint; typedef struct Select Select; @@ -13111,7 +14160,7 @@ typedef struct SQLiteThread SQLiteThread; typedef struct SelectDest SelectDest; typedef struct SrcList SrcList; -typedef struct StrAccum StrAccum; +typedef struct sqlite3_str StrAccum; /* Internal alias for sqlite3_str */ typedef struct Table Table; typedef struct TableLock TableLock; typedef struct Token Token; @@ -13120,12 +14169,40 @@ typedef struct TriggerPrg TriggerPrg; typedef struct TriggerStep TriggerStep; typedef struct UnpackedRecord UnpackedRecord; +typedef struct Upsert Upsert; typedef struct VTable VTable; typedef struct VtabCtx VtabCtx; typedef struct Walker Walker; typedef struct WhereInfo WhereInfo; +typedef struct Window Window; typedef struct With With; + +/* +** The bitmask datatype defined below is used for various optimizations. +** +** Changing this from a 64-bit to a 32-bit type limits the number of +** tables in a join to 32 instead of 64. But it also reduces the size +** of the library by 738 bytes on ix86. +*/ +#ifdef SQLITE_BITMASK_TYPE + typedef SQLITE_BITMASK_TYPE Bitmask; +#else + typedef u64 Bitmask; +#endif + +/* +** The number of bits in a Bitmask. "BMS" means "BitMask Size". +*/ +#define BMS ((int)(sizeof(Bitmask)*8)) + +/* +** A bit in a Bitmask +*/ +#define MASKBIT(n) (((Bitmask)1)<<(n)) +#define MASKBIT32(n) (((unsigned int)1)<<(n)) +#define ALLBITS ((Bitmask)-1) + /* A VList object records a mapping between parameters/variables/wildcards ** in the SQL statement (such as $abc, @pqr, or :xyz) and the integer ** variable number associated with that parameter. See the format description @@ -13221,7 +14298,7 @@ SQLITE_PRIVATE int sqlite3BtreeGetReserveNoMutex(Btree *p); SQLITE_PRIVATE int sqlite3BtreeSetAutoVacuum(Btree *, int); SQLITE_PRIVATE int sqlite3BtreeGetAutoVacuum(Btree *); -SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree*,int); +SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree*,int,int*); SQLITE_PRIVATE int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster); SQLITE_PRIVATE int sqlite3BtreeCommitPhaseTwo(Btree*, int); SQLITE_PRIVATE int sqlite3BtreeCommit(Btree*); @@ -13373,6 +14450,7 @@ struct KeyInfo*, /* First argument to compare function */ BtCursor *pCursor /* Space to write cursor structure */ ); +SQLITE_PRIVATE BtCursor *sqlite3BtreeFakeValidCursor(void); SQLITE_PRIVATE int sqlite3BtreeCursorSize(void); SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor*); SQLITE_PRIVATE void sqlite3BtreeCursorHintFlags(BtCursor*, unsigned); @@ -13401,14 +14479,29 @@ ** entry in either an index or table btree. ** ** Index btrees (used for indexes and also WITHOUT ROWID tables) contain -** an arbitrary key and no data. These btrees have pKey,nKey set to their -** key and pData,nData,nZero set to zero. +** an arbitrary key and no data. These btrees have pKey,nKey set to the +** key and the pData,nData,nZero fields are uninitialized. The aMem,nMem +** fields give an array of Mem objects that are a decomposition of the key. +** The nMem field might be zero, indicating that no decomposition is available. ** ** Table btrees (used for rowid tables) contain an integer rowid used as ** the key and passed in the nKey field. The pKey field is zero. ** pData,nData hold the content of the new entry. nZero extra zero bytes ** are appended to the end of the content when constructing the entry. +** The aMem,nMem fields are uninitialized for table btrees. ** +** Field usage summary: +** +** Table BTrees Index Btrees +** +** pKey always NULL encoded key +** nKey the ROWID length of pKey +** pData data not used +** aMem not used decomposed key value +** nMem not used entries in aMem +** nData length of pData not used +** nZero extra zeros after pData not used +** ** This object is used to pass information into sqlite3BtreeInsert(). The ** same information used to be passed as five separate parameters. But placing ** the information into this object helps to keep the interface more @@ -13418,7 +14511,7 @@ struct BtreePayload { const void *pKey; /* Key content for indexes. NULL for tables */ sqlite3_int64 nKey; /* Size of pKey for indexes. PRIMARY KEY for tabs */ - const void *pData; /* Data for tables. NULL for indexes */ + const void *pData; /* Data for tables. */ sqlite3_value *aMem; /* First of nMem value in the unpacked pKey */ u16 nMem; /* Number of aMem[] value. Might be zero */ int nData; /* Size of pData. 0 if none. */ @@ -13428,11 +14521,17 @@ SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const BtreePayload *pPayload, int flags, int seekResult); SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes); +#ifndef SQLITE_OMIT_WINDOWFUNC +SQLITE_PRIVATE void sqlite3BtreeSkipNext(BtCursor*); +#endif SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes); SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int flags); SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*); SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int flags); SQLITE_PRIVATE i64 sqlite3BtreeIntegerKey(BtCursor*); +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC +SQLITE_PRIVATE i64 sqlite3BtreeOffset(BtCursor*); +#endif SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor*, u32 offset, u32 amt, void*); SQLITE_PRIVATE const void *sqlite3BtreePayloadFetch(BtCursor*, u32 *pAmt); SQLITE_PRIVATE u32 sqlite3BtreePayloadSize(BtCursor*); @@ -13592,7 +14691,8 @@ u64 cycles; /* Total time spent executing this instruction */ #endif #ifdef SQLITE_VDBE_COVERAGE - int iSrcLine; /* Source-code line that generated this opcode */ + u32 iSrcLine; /* Source-code line that generated this opcode + ** with flags in the upper 8 bits */ #endif }; typedef struct VdbeOp VdbeOp; @@ -13646,6 +14746,7 @@ #define P4_INT64 (-14) /* P4 is a 64-bit signed integer */ #define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */ #define P4_FUNCCTX (-16) /* P4 is a pointer to an sqlite3_context object */ +#define P4_DYNBLOB (-17) /* Pointer to memory from sqliteMalloc() */ /* Error message codes for OP_Halt */ #define P5_ConstraintNotNull 1 @@ -13691,171 +14792,177 @@ #define OP_Savepoint 0 #define OP_AutoCommit 1 #define OP_Transaction 2 -#define OP_SorterNext 3 -#define OP_PrevIfOpen 4 -#define OP_NextIfOpen 5 -#define OP_Prev 6 -#define OP_Next 7 -#define OP_Checkpoint 8 -#define OP_JournalMode 9 -#define OP_Vacuum 10 -#define OP_VFilter 11 /* synopsis: iplan=r[P3] zplan='P4' */ -#define OP_VUpdate 12 /* synopsis: data=r[P3@P2] */ -#define OP_Goto 13 -#define OP_Gosub 14 -#define OP_InitCoroutine 15 -#define OP_Yield 16 -#define OP_MustBeInt 17 -#define OP_Jump 18 +#define OP_SorterNext 3 /* jump */ +#define OP_Prev 4 /* jump */ +#define OP_Next 5 /* jump */ +#define OP_Checkpoint 6 +#define OP_JournalMode 7 +#define OP_Vacuum 8 +#define OP_VFilter 9 /* jump, synopsis: iplan=r[P3] zplan='P4' */ +#define OP_VUpdate 10 /* synopsis: data=r[P3@P2] */ +#define OP_Goto 11 /* jump */ +#define OP_Gosub 12 /* jump */ +#define OP_InitCoroutine 13 /* jump */ +#define OP_Yield 14 /* jump */ +#define OP_MustBeInt 15 /* jump */ +#define OP_Jump 16 /* jump */ +#define OP_Once 17 /* jump */ +#define OP_If 18 /* jump */ #define OP_Not 19 /* same as TK_NOT, synopsis: r[P2]= !r[P1] */ -#define OP_Once 20 -#define OP_If 21 -#define OP_IfNot 22 -#define OP_IfNullRow 23 /* synopsis: if P1.nullRow then r[P3]=NULL, goto P2 */ -#define OP_SeekLT 24 /* synopsis: key=r[P3@P4] */ -#define OP_SeekLE 25 /* synopsis: key=r[P3@P4] */ -#define OP_SeekGE 26 /* synopsis: key=r[P3@P4] */ -#define OP_SeekGT 27 /* synopsis: key=r[P3@P4] */ -#define OP_NoConflict 28 /* synopsis: key=r[P3@P4] */ -#define OP_NotFound 29 /* synopsis: key=r[P3@P4] */ -#define OP_Found 30 /* synopsis: key=r[P3@P4] */ -#define OP_SeekRowid 31 /* synopsis: intkey=r[P3] */ -#define OP_NotExists 32 /* synopsis: intkey=r[P3] */ -#define OP_Last 33 -#define OP_IfSmaller 34 -#define OP_SorterSort 35 -#define OP_Sort 36 -#define OP_Rewind 37 -#define OP_IdxLE 38 /* synopsis: key=r[P3@P4] */ -#define OP_IdxGT 39 /* synopsis: key=r[P3@P4] */ -#define OP_IdxLT 40 /* synopsis: key=r[P3@P4] */ -#define OP_IdxGE 41 /* synopsis: key=r[P3@P4] */ -#define OP_RowSetRead 42 /* synopsis: r[P3]=rowset(P1) */ -#define OP_RowSetTest 43 /* synopsis: if r[P3] in rowset(P1) goto P2 */ -#define OP_Program 44 -#define OP_FkIfZero 45 /* synopsis: if fkctr[P1]==0 goto P2 */ -#define OP_IfPos 46 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */ -#define OP_IfNotZero 47 /* synopsis: if r[P1]!=0 then r[P1]--, goto P2 */ -#define OP_DecrJumpZero 48 /* synopsis: if (--r[P1])==0 goto P2 */ -#define OP_IncrVacuum 49 -#define OP_VNext 50 -#define OP_Init 51 /* synopsis: Start at P2 */ -#define OP_Return 52 -#define OP_EndCoroutine 53 -#define OP_HaltIfNull 54 /* synopsis: if r[P3]=null halt */ -#define OP_Halt 55 -#define OP_Integer 56 /* synopsis: r[P2]=P1 */ -#define OP_Int64 57 /* synopsis: r[P2]=P4 */ -#define OP_String 58 /* synopsis: r[P2]='P4' (len=P1) */ -#define OP_Null 59 /* synopsis: r[P2..P3]=NULL */ -#define OP_SoftNull 60 /* synopsis: r[P1]=NULL */ -#define OP_Blob 61 /* synopsis: r[P2]=P4 (len=P1) */ -#define OP_Variable 62 /* synopsis: r[P2]=parameter(P1,P4) */ -#define OP_Move 63 /* synopsis: r[P2@P3]=r[P1@P3] */ -#define OP_Copy 64 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */ -#define OP_SCopy 65 /* synopsis: r[P2]=r[P1] */ -#define OP_IntCopy 66 /* synopsis: r[P2]=r[P1] */ -#define OP_ResultRow 67 /* synopsis: output=r[P1@P2] */ -#define OP_CollSeq 68 -#define OP_AddImm 69 /* synopsis: r[P1]=r[P1]+P2 */ -#define OP_Or 70 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */ -#define OP_And 71 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */ -#define OP_RealAffinity 72 -#define OP_Cast 73 /* synopsis: affinity(r[P1]) */ -#define OP_Permutation 74 -#define OP_IsNull 75 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */ -#define OP_NotNull 76 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */ -#define OP_Ne 77 /* same as TK_NE, synopsis: IF r[P3]!=r[P1] */ -#define OP_Eq 78 /* same as TK_EQ, synopsis: IF r[P3]==r[P1] */ -#define OP_Gt 79 /* same as TK_GT, synopsis: IF r[P3]>r[P1] */ -#define OP_Le 80 /* same as TK_LE, synopsis: IF r[P3]<=r[P1] */ -#define OP_Lt 81 /* same as TK_LT, synopsis: IF r[P3]=r[P1] */ -#define OP_ElseNotEq 83 /* same as TK_ESCAPE */ -#define OP_BitAnd 84 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */ -#define OP_BitOr 85 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */ -#define OP_ShiftLeft 86 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<>r[P1] */ -#define OP_Add 88 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */ -#define OP_Subtract 89 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */ -#define OP_Multiply 90 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */ -#define OP_Divide 91 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */ -#define OP_Remainder 92 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */ -#define OP_Concat 93 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */ -#define OP_Compare 94 /* synopsis: r[P1@P3] <-> r[P2@P3] */ -#define OP_BitNot 95 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */ -#define OP_Column 96 /* synopsis: r[P3]=PX */ -#define OP_String8 97 /* same as TK_STRING, synopsis: r[P2]='P4' */ -#define OP_Affinity 98 /* synopsis: affinity(r[P1@P2]) */ -#define OP_MakeRecord 99 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ -#define OP_Count 100 /* synopsis: r[P2]=count() */ -#define OP_ReadCookie 101 -#define OP_SetCookie 102 -#define OP_ReopenIdx 103 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenRead 104 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenWrite 105 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenDup 106 -#define OP_OpenAutoindex 107 /* synopsis: nColumn=P2 */ -#define OP_OpenEphemeral 108 /* synopsis: nColumn=P2 */ -#define OP_SorterOpen 109 -#define OP_SequenceTest 110 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */ -#define OP_OpenPseudo 111 /* synopsis: P3 columns in r[P2] */ -#define OP_Close 112 -#define OP_ColumnsUsed 113 -#define OP_Sequence 114 /* synopsis: r[P2]=cursor[P1].ctr++ */ -#define OP_NewRowid 115 /* synopsis: r[P2]=rowid */ -#define OP_Insert 116 /* synopsis: intkey=r[P3] data=r[P2] */ -#define OP_InsertInt 117 /* synopsis: intkey=P3 data=r[P2] */ -#define OP_Delete 118 -#define OP_ResetCount 119 -#define OP_SorterCompare 120 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */ -#define OP_SorterData 121 /* synopsis: r[P2]=data */ -#define OP_RowData 122 /* synopsis: r[P2]=data */ -#define OP_Rowid 123 /* synopsis: r[P2]=rowid */ -#define OP_NullRow 124 -#define OP_SorterInsert 125 /* synopsis: key=r[P2] */ -#define OP_IdxInsert 126 /* synopsis: key=r[P2] */ -#define OP_IdxDelete 127 /* synopsis: key=r[P2@P3] */ -#define OP_DeferredSeek 128 /* synopsis: Move P3 to P1.rowid if needed */ -#define OP_IdxRowid 129 /* synopsis: r[P2]=rowid */ -#define OP_Destroy 130 -#define OP_Clear 131 -#define OP_Real 132 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ -#define OP_ResetSorter 133 -#define OP_CreateIndex 134 /* synopsis: r[P2]=root iDb=P1 */ -#define OP_CreateTable 135 /* synopsis: r[P2]=root iDb=P1 */ -#define OP_SqlExec 136 -#define OP_ParseSchema 137 -#define OP_LoadAnalysis 138 -#define OP_DropTable 139 -#define OP_DropIndex 140 -#define OP_DropTrigger 141 -#define OP_IntegrityCk 142 -#define OP_RowSetAdd 143 /* synopsis: rowset(P1)=r[P2] */ -#define OP_Param 144 -#define OP_FkCounter 145 /* synopsis: fkctr[P1]+=P2 */ -#define OP_MemMax 146 /* synopsis: r[P1]=max(r[P1],r[P2]) */ -#define OP_OffsetLimit 147 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */ -#define OP_AggStep0 148 /* synopsis: accum=r[P3] step(r[P2@P5]) */ -#define OP_AggStep 149 /* synopsis: accum=r[P3] step(r[P2@P5]) */ -#define OP_AggFinal 150 /* synopsis: accum=r[P1] N=P2 */ -#define OP_Expire 151 -#define OP_TableLock 152 /* synopsis: iDb=P1 root=P2 write=P3 */ -#define OP_VBegin 153 -#define OP_VCreate 154 -#define OP_VDestroy 155 -#define OP_VOpen 156 -#define OP_VColumn 157 /* synopsis: r[P3]=vcolumn(P2) */ -#define OP_VRename 158 -#define OP_Pagecount 159 -#define OP_MaxPgcnt 160 -#define OP_PureFunc0 161 -#define OP_Function0 162 /* synopsis: r[P3]=func(r[P2@P5]) */ -#define OP_PureFunc 163 -#define OP_Function 164 /* synopsis: r[P3]=func(r[P2@P5]) */ -#define OP_CursorHint 165 -#define OP_Noop 166 -#define OP_Explain 167 +#define OP_IfNot 20 /* jump */ +#define OP_IfNullRow 21 /* jump, synopsis: if P1.nullRow then r[P3]=NULL, goto P2 */ +#define OP_SeekLT 22 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekLE 23 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekGE 24 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekGT 25 /* jump, synopsis: key=r[P3@P4] */ +#define OP_IfNoHope 26 /* jump, synopsis: key=r[P3@P4] */ +#define OP_NoConflict 27 /* jump, synopsis: key=r[P3@P4] */ +#define OP_NotFound 28 /* jump, synopsis: key=r[P3@P4] */ +#define OP_Found 29 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekRowid 30 /* jump, synopsis: intkey=r[P3] */ +#define OP_NotExists 31 /* jump, synopsis: intkey=r[P3] */ +#define OP_Last 32 /* jump */ +#define OP_IfSmaller 33 /* jump */ +#define OP_SorterSort 34 /* jump */ +#define OP_Sort 35 /* jump */ +#define OP_Rewind 36 /* jump */ +#define OP_IdxLE 37 /* jump, synopsis: key=r[P3@P4] */ +#define OP_IdxGT 38 /* jump, synopsis: key=r[P3@P4] */ +#define OP_IdxLT 39 /* jump, synopsis: key=r[P3@P4] */ +#define OP_IdxGE 40 /* jump, synopsis: key=r[P3@P4] */ +#define OP_RowSetRead 41 /* jump, synopsis: r[P3]=rowset(P1) */ +#define OP_RowSetTest 42 /* jump, synopsis: if r[P3] in rowset(P1) goto P2 */ +#define OP_Or 43 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */ +#define OP_And 44 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */ +#define OP_Program 45 /* jump */ +#define OP_FkIfZero 46 /* jump, synopsis: if fkctr[P1]==0 goto P2 */ +#define OP_IfPos 47 /* jump, synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */ +#define OP_IfNotZero 48 /* jump, synopsis: if r[P1]!=0 then r[P1]--, goto P2 */ +#define OP_DecrJumpZero 49 /* jump, synopsis: if (--r[P1])==0 goto P2 */ +#define OP_IsNull 50 /* jump, same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */ +#define OP_NotNull 51 /* jump, same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */ +#define OP_Ne 52 /* jump, same as TK_NE, synopsis: IF r[P3]!=r[P1] */ +#define OP_Eq 53 /* jump, same as TK_EQ, synopsis: IF r[P3]==r[P1] */ +#define OP_Gt 54 /* jump, same as TK_GT, synopsis: IF r[P3]>r[P1] */ +#define OP_Le 55 /* jump, same as TK_LE, synopsis: IF r[P3]<=r[P1] */ +#define OP_Lt 56 /* jump, same as TK_LT, synopsis: IF r[P3]=r[P1] */ +#define OP_ElseNotEq 58 /* jump, same as TK_ESCAPE */ +#define OP_IncrVacuum 59 /* jump */ +#define OP_VNext 60 /* jump */ +#define OP_Init 61 /* jump, synopsis: Start at P2 */ +#define OP_PureFunc0 62 +#define OP_Function0 63 /* synopsis: r[P3]=func(r[P2@P5]) */ +#define OP_PureFunc 64 +#define OP_Function 65 /* synopsis: r[P3]=func(r[P2@P5]) */ +#define OP_Return 66 +#define OP_EndCoroutine 67 +#define OP_HaltIfNull 68 /* synopsis: if r[P3]=null halt */ +#define OP_Halt 69 +#define OP_Integer 70 /* synopsis: r[P2]=P1 */ +#define OP_Int64 71 /* synopsis: r[P2]=P4 */ +#define OP_String 72 /* synopsis: r[P2]='P4' (len=P1) */ +#define OP_Null 73 /* synopsis: r[P2..P3]=NULL */ +#define OP_SoftNull 74 /* synopsis: r[P1]=NULL */ +#define OP_Blob 75 /* synopsis: r[P2]=P4 (len=P1) */ +#define OP_Variable 76 /* synopsis: r[P2]=parameter(P1,P4) */ +#define OP_Move 77 /* synopsis: r[P2@P3]=r[P1@P3] */ +#define OP_Copy 78 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */ +#define OP_SCopy 79 /* synopsis: r[P2]=r[P1] */ +#define OP_IntCopy 80 /* synopsis: r[P2]=r[P1] */ +#define OP_ResultRow 81 /* synopsis: output=r[P1@P2] */ +#define OP_CollSeq 82 +#define OP_AddImm 83 /* synopsis: r[P1]=r[P1]+P2 */ +#define OP_RealAffinity 84 +#define OP_Cast 85 /* synopsis: affinity(r[P1]) */ +#define OP_Permutation 86 +#define OP_Compare 87 /* synopsis: r[P1@P3] <-> r[P2@P3] */ +#define OP_IsTrue 88 /* synopsis: r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4 */ +#define OP_Offset 89 /* synopsis: r[P3] = sqlite_offset(P1) */ +#define OP_Column 90 /* synopsis: r[P3]=PX */ +#define OP_Affinity 91 /* synopsis: affinity(r[P1@P2]) */ +#define OP_BitAnd 92 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */ +#define OP_BitOr 93 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */ +#define OP_ShiftLeft 94 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<>r[P1] */ +#define OP_Add 96 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */ +#define OP_Subtract 97 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */ +#define OP_Multiply 98 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */ +#define OP_Divide 99 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */ +#define OP_Remainder 100 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */ +#define OP_Concat 101 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */ +#define OP_MakeRecord 102 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ +#define OP_BitNot 103 /* same as TK_BITNOT, synopsis: r[P2]= ~r[P1] */ +#define OP_Count 104 /* synopsis: r[P2]=count() */ +#define OP_ReadCookie 105 +#define OP_String8 106 /* same as TK_STRING, synopsis: r[P2]='P4' */ +#define OP_SetCookie 107 +#define OP_ReopenIdx 108 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenRead 109 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenWrite 110 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenDup 111 +#define OP_OpenAutoindex 112 /* synopsis: nColumn=P2 */ +#define OP_OpenEphemeral 113 /* synopsis: nColumn=P2 */ +#define OP_SorterOpen 114 +#define OP_SequenceTest 115 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */ +#define OP_OpenPseudo 116 /* synopsis: P3 columns in r[P2] */ +#define OP_Close 117 +#define OP_ColumnsUsed 118 +#define OP_SeekHit 119 /* synopsis: seekHit=P2 */ +#define OP_Sequence 120 /* synopsis: r[P2]=cursor[P1].ctr++ */ +#define OP_NewRowid 121 /* synopsis: r[P2]=rowid */ +#define OP_Insert 122 /* synopsis: intkey=r[P3] data=r[P2] */ +#define OP_InsertInt 123 /* synopsis: intkey=P3 data=r[P2] */ +#define OP_Delete 124 +#define OP_ResetCount 125 +#define OP_SorterCompare 126 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */ +#define OP_SorterData 127 /* synopsis: r[P2]=data */ +#define OP_RowData 128 /* synopsis: r[P2]=data */ +#define OP_Rowid 129 /* synopsis: r[P2]=rowid */ +#define OP_NullRow 130 +#define OP_SeekEnd 131 +#define OP_SorterInsert 132 /* synopsis: key=r[P2] */ +#define OP_IdxInsert 133 /* synopsis: key=r[P2] */ +#define OP_IdxDelete 134 /* synopsis: key=r[P2@P3] */ +#define OP_DeferredSeek 135 /* synopsis: Move P3 to P1.rowid if needed */ +#define OP_IdxRowid 136 /* synopsis: r[P2]=rowid */ +#define OP_Destroy 137 +#define OP_Clear 138 +#define OP_ResetSorter 139 +#define OP_CreateBtree 140 /* synopsis: r[P2]=root iDb=P1 flags=P3 */ +#define OP_Real 141 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ +#define OP_SqlExec 142 +#define OP_ParseSchema 143 +#define OP_LoadAnalysis 144 +#define OP_DropTable 145 +#define OP_DropIndex 146 +#define OP_DropTrigger 147 +#define OP_IntegrityCk 148 +#define OP_RowSetAdd 149 /* synopsis: rowset(P1)=r[P2] */ +#define OP_Param 150 +#define OP_FkCounter 151 /* synopsis: fkctr[P1]+=P2 */ +#define OP_MemMax 152 /* synopsis: r[P1]=max(r[P1],r[P2]) */ +#define OP_OffsetLimit 153 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */ +#define OP_AggInverse 154 /* synopsis: accum=r[P3] inverse(r[P2@P5]) */ +#define OP_AggStep 155 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_AggStep1 156 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_AggValue 157 /* synopsis: r[P3]=value N=P2 */ +#define OP_AggFinal 158 /* synopsis: accum=r[P1] N=P2 */ +#define OP_Expire 159 +#define OP_TableLock 160 /* synopsis: iDb=P1 root=P2 write=P3 */ +#define OP_VBegin 161 +#define OP_VCreate 162 +#define OP_VDestroy 163 +#define OP_VOpen 164 +#define OP_VColumn 165 /* synopsis: r[P3]=vcolumn(P2) */ +#define OP_VRename 166 +#define OP_Pagecount 167 +#define OP_MaxPgcnt 168 +#define OP_Trace 169 +#define OP_CursorHint 170 +#define OP_Noop 171 +#define OP_Explain 172 +#define OP_Abortable 173 /* Properties such as "out2" or "jump" that are specified in ** comments following the "case" for each opcode in the vdbe.c @@ -13868,28 +14975,28 @@ #define OPFLG_OUT2 0x10 /* out2: P2 is an output */ #define OPFLG_OUT3 0x20 /* out3: P3 is an output */ #define OPFLG_INITIALIZER {\ -/* 0 */ 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01,\ -/* 8 */ 0x00, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, 0x01,\ -/* 16 */ 0x03, 0x03, 0x01, 0x12, 0x01, 0x03, 0x03, 0x01,\ +/* 0 */ 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x10,\ +/* 8 */ 0x00, 0x01, 0x00, 0x01, 0x01, 0x01, 0x03, 0x03,\ +/* 16 */ 0x01, 0x01, 0x03, 0x12, 0x03, 0x01, 0x09, 0x09,\ /* 24 */ 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,\ -/* 32 */ 0x09, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,\ -/* 40 */ 0x01, 0x01, 0x23, 0x0b, 0x01, 0x01, 0x03, 0x03,\ -/* 48 */ 0x03, 0x01, 0x01, 0x01, 0x02, 0x02, 0x08, 0x00,\ -/* 56 */ 0x10, 0x10, 0x10, 0x10, 0x00, 0x10, 0x10, 0x00,\ -/* 64 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x02, 0x26, 0x26,\ -/* 72 */ 0x02, 0x02, 0x00, 0x03, 0x03, 0x0b, 0x0b, 0x0b,\ -/* 80 */ 0x0b, 0x0b, 0x0b, 0x01, 0x26, 0x26, 0x26, 0x26,\ -/* 88 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x00, 0x12,\ -/* 96 */ 0x00, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\ -/* 104 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 112 */ 0x00, 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00,\ -/* 120 */ 0x00, 0x00, 0x00, 0x10, 0x00, 0x04, 0x04, 0x00,\ -/* 128 */ 0x00, 0x10, 0x10, 0x00, 0x10, 0x00, 0x10, 0x10,\ -/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,\ -/* 144 */ 0x10, 0x00, 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00,\ -/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,\ -/* 160 */ 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ -} +/* 32 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,\ +/* 40 */ 0x01, 0x23, 0x0b, 0x26, 0x26, 0x01, 0x01, 0x03,\ +/* 48 */ 0x03, 0x03, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\ +/* 56 */ 0x0b, 0x0b, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00,\ +/* 64 */ 0x00, 0x00, 0x02, 0x02, 0x08, 0x00, 0x10, 0x10,\ +/* 72 */ 0x10, 0x10, 0x00, 0x10, 0x10, 0x00, 0x00, 0x10,\ +/* 80 */ 0x10, 0x00, 0x00, 0x02, 0x02, 0x02, 0x00, 0x00,\ +/* 88 */ 0x12, 0x20, 0x00, 0x00, 0x26, 0x26, 0x26, 0x26,\ +/* 96 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x00, 0x12,\ +/* 104 */ 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 112 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 120 */ 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 128 */ 0x00, 0x10, 0x00, 0x00, 0x04, 0x04, 0x00, 0x00,\ +/* 136 */ 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\ +/* 144 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10, 0x00,\ +/* 152 */ 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 160 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,\ +/* 168 */ 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,} /* The sqlite3P2Values() routine is able to run faster if it knows ** the value of the largest JUMP opcode. The smaller the maximum @@ -13897,7 +15004,7 @@ ** generated this include file strives to group all JUMP opcodes ** together near the beginning of the list. */ -#define SQLITE_MX_JUMP_OPCODE 83 /* Maximum JUMP opcode */ +#define SQLITE_MX_JUMP_OPCODE 61 /* Maximum JUMP opcode */ /************** End of opcodes.h *********************************************/ /************** Continuing where we left off in vdbe.h ***********************/ @@ -13931,7 +15038,24 @@ # define sqlite3VdbeVerifyNoMallocRequired(A,B) # define sqlite3VdbeVerifyNoResultRow(A) #endif -SQLITE_PRIVATE VdbeOp *sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp, int iLineno); +#if defined(SQLITE_DEBUG) +SQLITE_PRIVATE void sqlite3VdbeVerifyAbortable(Vdbe *p, int); +#else +# define sqlite3VdbeVerifyAbortable(A,B) +#endif +SQLITE_PRIVATE VdbeOp *sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp,int iLineno); +#ifndef SQLITE_OMIT_EXPLAIN +SQLITE_PRIVATE void sqlite3VdbeExplain(Parse*,u8,const char*,...); +SQLITE_PRIVATE void sqlite3VdbeExplainPop(Parse*); +SQLITE_PRIVATE int sqlite3VdbeExplainParent(Parse*); +# define ExplainQueryPlan(P) sqlite3VdbeExplain P +# define ExplainQueryPlanPop(P) sqlite3VdbeExplainPop(P) +# define ExplainQueryPlanParent(P) sqlite3VdbeExplainParent(P) +#else +# define ExplainQueryPlan(P) +# define ExplainQueryPlanPop(P) +# define ExplainQueryPlanParent(P) 0 +#endif SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*,int,char*); SQLITE_PRIVATE void sqlite3VdbeChangeOpcode(Vdbe*, u32 addr, u8); SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, u32 addr, int P1); @@ -13975,6 +15099,7 @@ SQLITE_PRIVATE char *sqlite3VdbeExpandSql(Vdbe*, const char*); #endif SQLITE_PRIVATE int sqlite3MemCompare(const Mem*, const Mem*, const CollSeq*); +SQLITE_PRIVATE int sqlite3BlobCompare(const Mem*, const Mem*); SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*); SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*); @@ -14030,17 +15155,43 @@ ** ** VdbeCoverageNeverTaken(v) // Previous branch is never taken ** +** VdbeCoverageNeverNull(v) // Previous three-way branch is only +** // taken on the first two ways. The +** // NULL option is not possible +** +** VdbeCoverageEqNe(v) // Previous OP_Jump is only interested +** // in distingishing equal and not-equal. +** ** Every VDBE branch operation must be tagged with one of the macros above. ** If not, then when "make test" is run with -DSQLITE_VDBE_COVERAGE and ** -DSQLITE_DEBUG then an ALWAYS() will fail in the vdbeTakeBranch() ** routine in vdbe.c, alerting the developer to the missed tag. +** +** During testing, the test application will invoke +** sqlite3_test_control(SQLITE_TESTCTRL_VDBE_COVERAGE,...) to set a callback +** routine that is invoked as each bytecode branch is taken. The callback +** contains the sqlite3.c source line number ov the VdbeCoverage macro and +** flags to indicate whether or not the branch was taken. The test application +** is responsible for keeping track of this and reporting byte-code branches +** that are never taken. +** +** See the VdbeBranchTaken() macro and vdbeTakeBranch() function in the +** vdbe.c source file for additional information. */ #ifdef SQLITE_VDBE_COVERAGE SQLITE_PRIVATE void sqlite3VdbeSetLineNumber(Vdbe*,int); # define VdbeCoverage(v) sqlite3VdbeSetLineNumber(v,__LINE__) # define VdbeCoverageIf(v,x) if(x)sqlite3VdbeSetLineNumber(v,__LINE__) -# define VdbeCoverageAlwaysTaken(v) sqlite3VdbeSetLineNumber(v,2); -# define VdbeCoverageNeverTaken(v) sqlite3VdbeSetLineNumber(v,1); +# define VdbeCoverageAlwaysTaken(v) \ + sqlite3VdbeSetLineNumber(v,__LINE__|0x5000000); +# define VdbeCoverageNeverTaken(v) \ + sqlite3VdbeSetLineNumber(v,__LINE__|0x6000000); +# define VdbeCoverageNeverNull(v) \ + sqlite3VdbeSetLineNumber(v,__LINE__|0x4000000); +# define VdbeCoverageNeverNullIf(v,x) \ + if(x)sqlite3VdbeSetLineNumber(v,__LINE__|0x4000000); +# define VdbeCoverageEqNe(v) \ + sqlite3VdbeSetLineNumber(v,__LINE__|0x8000000); # define VDBE_OFFSET_LINENO(x) (__LINE__+x) #else # define VdbeCoverage(v) @@ -14047,6 +15198,9 @@ # define VdbeCoverageIf(v,x) # define VdbeCoverageAlwaysTaken(v) # define VdbeCoverageNeverTaken(v) +# define VdbeCoverageNeverNull(v) +# define VdbeCoverageNeverNullIf(v,x) +# define VdbeCoverageEqNe(v) # define VDBE_OFFSET_LINENO(x) 0 #endif @@ -14056,6 +15210,10 @@ # define sqlite3VdbeScanStatus(a,b,c,d,e) #endif +#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) +SQLITE_PRIVATE void sqlite3VdbePrintOp(FILE*, int, VdbeOp*); +#endif + #endif /* SQLITE_VDBE_H */ /************** End of vdbe.h ************************************************/ @@ -14190,7 +15348,7 @@ SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*); /* Functions used to configure a Pager object. */ -SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(Pager*, int(*)(void *), void *); +SQLITE_PRIVATE void sqlite3PagerSetBusyHandler(Pager*, int(*)(void *), void *); SQLITE_PRIVATE int sqlite3PagerSetPagesize(Pager*, u32*, int); #ifdef SQLITE_HAS_CODEC SQLITE_PRIVATE void sqlite3PagerAlignReserve(Pager*,Pager*); @@ -14215,6 +15373,7 @@ SQLITE_PRIVATE void sqlite3PagerRef(DbPage*); SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*); SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage*); +SQLITE_PRIVATE void sqlite3PagerUnrefPageOne(DbPage*); /* Operations on page references. */ SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*); @@ -14242,18 +15401,19 @@ SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager); SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen); SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager, sqlite3*); -# ifdef SQLITE_DIRECT_OVERFLOW_READ -SQLITE_PRIVATE int sqlite3PagerUseWal(Pager *pPager, Pgno); -# endif # ifdef SQLITE_ENABLE_SNAPSHOT SQLITE_PRIVATE int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot); SQLITE_PRIVATE int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot); SQLITE_PRIVATE int sqlite3PagerSnapshotRecover(Pager *pPager); +SQLITE_PRIVATE int sqlite3PagerSnapshotCheck(Pager *pPager, sqlite3_snapshot *pSnapshot); +SQLITE_PRIVATE void sqlite3PagerSnapshotUnlock(Pager *pPager); # endif -#else -# define sqlite3PagerUseWal(x,y) 0 #endif +#ifdef SQLITE_DIRECT_OVERFLOW_READ +SQLITE_PRIVATE int sqlite3PagerDirectReadOk(Pager *pPager, Pgno pgno); +#endif + #ifdef SQLITE_ENABLE_ZIPVFS SQLITE_PRIVATE int sqlite3PagerWalFramesize(Pager *pPager); #endif @@ -14275,6 +15435,11 @@ SQLITE_PRIVATE void sqlite3PagerCacheStat(Pager *, int, int, int *); SQLITE_PRIVATE void sqlite3PagerClearCache(Pager*); SQLITE_PRIVATE int sqlite3SectorSize(sqlite3_file *); +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT +SQLITE_PRIVATE void sqlite3PagerResetLockTimeout(Pager *pPager); +#else +# define sqlite3PagerResetLockTimeout(X) +#endif /* Functions used to truncate the database file. */ SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno); @@ -14351,6 +15516,8 @@ i16 nRef; /* Number of users of this page */ PgHdr *pDirtyNext; /* Next element in list of dirty pages */ PgHdr *pDirtyPrev; /* Previous element in list of dirty pages */ + /* NB: pDirtyNext and pDirtyPrev are undefined if the + ** PgHdr object is not dirty */ }; /* Bit values for PgHdr.flags */ @@ -14489,6 +15656,10 @@ /* Number of dirty pages as a percentage of the configured cache size */ SQLITE_PRIVATE int sqlite3PCachePercentDirty(PCache*); +#ifdef SQLITE_DIRECT_OVERFLOW_READ +SQLITE_PRIVATE int sqlite3PCacheIsDirty(PCache *pCache); +#endif + #endif /* _PCACHE_H_ */ /************** End of pcache.h **********************************************/ @@ -14732,10 +15903,12 @@ #define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0 SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id); SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id); +#ifndef SQLITE_OMIT_WAL SQLITE_PRIVATE int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **); SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int, int, int); SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id); SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int); +#endif /* SQLITE_OMIT_WAL */ SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64, int, void **); SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *, i64, void *); @@ -14944,6 +16117,7 @@ #define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ #define DB_UnresetViews 0x0002 /* Some views have defined column names */ #define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */ +#define DB_ResetWanted 0x0008 /* Reset the schema when nSchemaLock==0 */ /* ** The number of different kinds of things that can be limited @@ -14975,9 +16149,9 @@ u32 bDisable; /* Only operate the lookaside when zero */ u16 sz; /* Size of each buffer in bytes */ u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */ - int nOut; /* Number of buffers currently checked out */ - int mxOut; /* Highwater mark for nOut */ - int anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ + u32 nSlot; /* Number of lookaside slots allocated */ + u32 anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ + LookasideSlot *pInit; /* List of buffers not previously used */ LookasideSlot *pFree; /* List of available buffers */ void *pStart; /* First byte of available memory space */ void *pEnd; /* First byte past end of available space */ @@ -14991,12 +16165,14 @@ ** functions use a regular table table from hash.h.) ** ** Hash each FuncDef structure into one of the FuncDefHash.a[] slots. -** Collisions are on the FuncDef.u.pHash chain. +** Collisions are on the FuncDef.u.pHash chain. Use the SQLITE_FUNC_HASH() +** macro to compute a hash on the function name. */ #define SQLITE_FUNC_HASH_SZ 23 struct FuncDefHash { FuncDef *a[SQLITE_FUNC_HASH_SZ]; /* Hash table for functions */ }; +#define SQLITE_FUNC_HASH(C,L) (((C)+(L))%SQLITE_FUNC_HASH_SZ) #ifdef SQLITE_USER_AUTHENTICATION /* @@ -15056,9 +16232,11 @@ sqlite3_mutex *mutex; /* Connection mutex */ Db *aDb; /* All backends */ int nDb; /* Number of backends currently in use */ - int flags; /* Miscellaneous flags. See below */ + u32 mDbFlags; /* flags recording internal state */ + u64 flags; /* flags settable by pragmas. See below */ i64 lastRowid; /* ROWID of most recent insert (see above) */ i64 szMmap; /* Default mmap_size setting */ + u32 nSchemaLock; /* Do not reset the schema when non-zero */ unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */ int errCode; /* Most recent error code (SQLITE_*) */ int errMask; /* & result codes with this before returning */ @@ -15075,7 +16253,7 @@ u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */ u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */ u8 mTrace; /* zero or more SQLITE_TRACE flags */ - u8 skipBtreeMutex; /* True if no shared-cache backends */ + u8 noSharedCache; /* True if no shared-cache backends */ u8 nSqlExec; /* Number of pending OP_SqlExec opcodes */ int nextPagesize; /* Pagesize after VACUUM if >0 */ u32 magic; /* Magic number for detect library misuse */ @@ -15087,8 +16265,9 @@ int newTnum; /* Rootpage of table being initialized */ u8 iDb; /* Which db file is being initialized */ u8 busy; /* TRUE if currently initializing */ - u8 orphanTrigger; /* Last statement is orphaned TEMP trigger */ - u8 imposterTable; /* Building an imposter table */ + unsigned orphanTrigger : 1; /* Last statement is orphaned TEMP trigger */ + unsigned imposterTable : 1; /* Building an imposter table */ + unsigned reopenMemdb : 1; /* ATTACH is really a reopen using MemDB */ } init; int nVdbeActive; /* Number of VDBEs currently running */ int nVdbeRead; /* Number of active VDBEs that read or write */ @@ -15141,7 +16320,7 @@ Hash aModule; /* populated by sqlite3_create_module() */ VtabCtx *pVtabCtx; /* Context for active vtab connect/create */ VTable **aVTrans; /* Virtual tables with open transactions */ - VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ + VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ #endif Hash aFunc; /* Hash table of connection functions */ Hash aCollSeq; /* All collating sequences */ @@ -15210,27 +16389,36 @@ #define SQLITE_ForeignKeys 0x00004000 /* Enforce foreign key constraints */ #define SQLITE_AutoIndex 0x00008000 /* Enable automatic indexes */ #define SQLITE_LoadExtension 0x00010000 /* Enable load_extension */ -#define SQLITE_EnableTrigger 0x00020000 /* True to enable triggers */ -#define SQLITE_DeferFKs 0x00040000 /* Defer all FK constraints */ -#define SQLITE_QueryOnly 0x00080000 /* Disable database changes */ -#define SQLITE_CellSizeCk 0x00100000 /* Check btree cell sizes on load */ -#define SQLITE_Fts3Tokenizer 0x00200000 /* Enable fts3_tokenizer(2) */ -#define SQLITE_EnableQPSG 0x00400000 /* Query Planner Stability Guarantee */ -/* The next four values are not used by PRAGMAs or by sqlite3_dbconfig() and -** could be factored out into a separate bit vector of the sqlite3 object. */ -#define SQLITE_InternChanges 0x00800000 /* Uncommitted Hash table changes */ -#define SQLITE_LoadExtFunc 0x01000000 /* Enable load_extension() SQL func */ -#define SQLITE_PreferBuiltin 0x02000000 /* Preference to built-in funcs */ -#define SQLITE_Vacuum 0x04000000 /* Currently in a VACUUM */ +#define SQLITE_LoadExtFunc 0x00020000 /* Enable load_extension() SQL func */ +#define SQLITE_EnableTrigger 0x00040000 /* True to enable triggers */ +#define SQLITE_DeferFKs 0x00080000 /* Defer all FK constraints */ +#define SQLITE_QueryOnly 0x00100000 /* Disable database changes */ +#define SQLITE_CellSizeCk 0x00200000 /* Check btree cell sizes on load */ +#define SQLITE_Fts3Tokenizer 0x00400000 /* Enable fts3_tokenizer(2) */ +#define SQLITE_EnableQPSG 0x00800000 /* Query Planner Stability Guarantee*/ +#define SQLITE_TriggerEQP 0x01000000 /* Show trigger EXPLAIN QUERY PLAN */ +#define SQLITE_ResetDatabase 0x02000000 /* Reset the database */ +#define SQLITE_LegacyAlter 0x04000000 /* Legacy ALTER TABLE behaviour */ +#define SQLITE_NoSchemaError 0x08000000 /* Do not report schema parse errors*/ +#define SQLITE_Defensive 0x10000000 /* Input SQL is likely hostile */ + /* Flags used only if debugging */ +#define HI(X) ((u64)(X)<<32) #ifdef SQLITE_DEBUG -#define SQLITE_SqlTrace 0x08000000 /* Debug print SQL as it executes */ -#define SQLITE_VdbeListing 0x10000000 /* Debug listings of VDBE programs */ -#define SQLITE_VdbeTrace 0x20000000 /* True to trace VDBE execution */ -#define SQLITE_VdbeAddopTrace 0x40000000 /* Trace sqlite3VdbeAddOp() calls */ -#define SQLITE_VdbeEQP 0x80000000 /* Debug EXPLAIN QUERY PLAN */ +#define SQLITE_SqlTrace HI(0x0001) /* Debug print SQL as it executes */ +#define SQLITE_VdbeListing HI(0x0002) /* Debug listings of VDBE progs */ +#define SQLITE_VdbeTrace HI(0x0004) /* True to trace VDBE execution */ +#define SQLITE_VdbeAddopTrace HI(0x0008) /* Trace sqlite3VdbeAddOp() calls */ +#define SQLITE_VdbeEQP HI(0x0010) /* Debug EXPLAIN QUERY PLAN */ #endif +/* +** Allowed values for sqlite3.mDbFlags +*/ +#define DBFLAG_SchemaChange 0x0001 /* Uncommitted Hash table changes */ +#define DBFLAG_PreferBuiltin 0x0002 /* Preference to built-in funcs */ +#define DBFLAG_Vacuum 0x0004 /* Currently in a VACUUM */ +#define DBFLAG_SchemaKnownOk 0x0008 /* Schema is known to be valid */ /* ** Bits of the sqlite3.dbOptFlags field that are used by the @@ -15238,19 +16426,22 @@ ** selectively disable various optimizations. */ #define SQLITE_QueryFlattener 0x0001 /* Query flattening */ -#define SQLITE_ColumnCache 0x0002 /* Column cache */ + /* 0x0002 available for reuse */ #define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */ #define SQLITE_FactorOutConst 0x0008 /* Constant factoring */ -/* not used 0x0010 // Was: SQLITE_IdxRealAsInt */ -#define SQLITE_DistinctOpt 0x0020 /* DISTINCT using indexes */ -#define SQLITE_CoverIdxScan 0x0040 /* Covering index scans */ -#define SQLITE_OrderByIdxJoin 0x0080 /* ORDER BY of joins via index */ -#define SQLITE_SubqCoroutine 0x0100 /* Evaluate subqueries as coroutines */ -#define SQLITE_Transitive 0x0200 /* Transitive constraints */ -#define SQLITE_OmitNoopJoin 0x0400 /* Omit unused tables in joins */ +#define SQLITE_DistinctOpt 0x0010 /* DISTINCT using indexes */ +#define SQLITE_CoverIdxScan 0x0020 /* Covering index scans */ +#define SQLITE_OrderByIdxJoin 0x0040 /* ORDER BY of joins via index */ +#define SQLITE_Transitive 0x0080 /* Transitive constraints */ +#define SQLITE_OmitNoopJoin 0x0100 /* Omit unused tables in joins */ +#define SQLITE_CountOfView 0x0200 /* The count-of-view optimization */ +#define SQLITE_CursorHints 0x0400 /* Add OP_CursorHint opcodes */ #define SQLITE_Stat34 0x0800 /* Use STAT3 or STAT4 data */ -#define SQLITE_CountOfView 0x1000 /* The count-of-view optimization */ -#define SQLITE_CursorHints 0x2000 /* Add OP_CursorHint opcodes */ + /* TH3 expects the Stat34 ^^^^^^ value to be 0x0800. Don't change it */ +#define SQLITE_PushDown 0x1000 /* The push-down optimization */ +#define SQLITE_SimplifyJoin 0x2000 /* Convert LEFT JOIN to JOIN */ +#define SQLITE_SkipScan 0x4000 /* Skip-scans */ +#define SQLITE_PropagateConst 0x8000 /* The constant propagation opt */ #define SQLITE_AllOpts 0xffff /* All optimizations */ /* @@ -15289,11 +16480,13 @@ */ struct FuncDef { i8 nArg; /* Number of arguments. -1 means unlimited */ - u16 funcFlags; /* Some combination of SQLITE_FUNC_* */ + u32 funcFlags; /* Some combination of SQLITE_FUNC_* */ void *pUserData; /* User data parameter */ FuncDef *pNext; /* Next function with same name */ void (*xSFunc)(sqlite3_context*,int,sqlite3_value**); /* func or agg-step */ void (*xFinalize)(sqlite3_context*); /* Agg finalizer */ + void (*xValue)(sqlite3_context*); /* Current agg value */ + void (*xInverse)(sqlite3_context*,int,sqlite3_value**); /* inverse agg-step */ const char *zName; /* SQL name of the function. */ union { FuncDef *pHash; /* Next with a different name but the same hash */ @@ -15349,6 +16542,10 @@ #define SQLITE_FUNC_SLOCHNG 0x2000 /* "Slow Change". Value constant during a ** single query - might change over time */ #define SQLITE_FUNC_AFFINITY 0x4000 /* Built-in affinity() function */ +#define SQLITE_FUNC_OFFSET 0x8000 /* Built-in sqlite_offset() function */ +#define SQLITE_FUNC_WINDOW 0x00010000 /* Built-in window-only function */ +#define SQLITE_FUNC_WINDOW_SIZE 0x20000 /* Requires partition size as arg. */ +#define SQLITE_FUNC_INTERNAL 0x00040000 /* For use by NestedParse() only */ /* ** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are @@ -15383,6 +16580,12 @@ ** are interpreted in the same way as the first 4 parameters to ** FUNCTION(). ** +** WFUNCTION(zName, nArg, iArg, xStep, xFinal, xValue, xInverse) +** Used to create an aggregate function definition implemented by +** the C functions xStep and xFinal. The first four parameters +** are interpreted in the same way as the first 4 parameters to +** FUNCTION(). +** ** LIKEFUNC(zName, nArg, pArg, flags) ** Used to create a scalar function definition of a function zName ** that accepts nArg arguments and is implemented by a call to C @@ -15393,32 +16596,39 @@ */ #define FUNCTION(zName, nArg, iArg, bNC, xFunc) \ {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ - SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, 0, #zName, {0} } #define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \ {nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ - SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, 0, #zName, {0} } #define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \ {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8, \ - 0, 0, xFunc, 0, #zName, {0} } + 0, 0, xFunc, 0, 0, 0, #zName, {0} } #define PURE_DATE(zName, nArg, iArg, bNC, xFunc) \ {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \ - (void*)&sqlite3Config, 0, xFunc, 0, #zName, {0} } + (void*)&sqlite3Config, 0, xFunc, 0, 0, 0, #zName, {0} } #define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \ {nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\ - SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } + SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, 0, 0, #zName, {0} } #define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \ {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ - pArg, 0, xFunc, 0, #zName, } + pArg, 0, xFunc, 0, 0, 0, #zName, } #define LIKEFUNC(zName, nArg, arg, flags) \ {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \ - (void *)arg, 0, likeFunc, 0, #zName, {0} } -#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \ + (void *)arg, 0, likeFunc, 0, 0, 0, #zName, {0} } +#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal, xValue) \ {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \ - SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}} + SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,xValue,0,#zName, {0}} #define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \ {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \ - SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}} + SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,xFinal,0,#zName, {0}} +#define WAGGREGATE(zName, nArg, arg, nc, xStep, xFinal, xValue, xInverse, f) \ + {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|f, \ + SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,xValue,xInverse,#zName, {0}} +#define INTERNAL_FUNCTION(zName, nArg, xFunc) \ + {nArg, SQLITE_FUNC_INTERNAL|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \ + 0, 0, xFunc, 0, 0, 0, #zName, {0} } + /* ** All current savepoints are stored in a linked list starting at ** sqlite3.pSavepoint. The first element in the list is the most recently @@ -15473,6 +16683,8 @@ #define COLFLAG_PRIMKEY 0x0001 /* Column is part of the primary key */ #define COLFLAG_HIDDEN 0x0002 /* A hidden column in a virtual table */ #define COLFLAG_HASTYPE 0x0004 /* Type name follows column name */ +#define COLFLAG_UNIQUE 0x0008 /* Column def contains "UNIQUE" or "PK" */ +#define COLFLAG_SORTERREF 0x0010 /* Use sorter-refs with this column */ /* ** A "Collating Sequence" is defined by an instance of the following @@ -15600,6 +16812,9 @@ struct Table { char *zName; /* Name of the table or view */ Column *aCol; /* Information about each column */ +#ifdef SQLITE_ENABLE_NORMALIZE + Hash *pColHash; /* All columns indexed by name */ +#endif Index *pIndex; /* List of SQL indexes on this table. */ Select *pSelect; /* NULL for tables. Points to definition if a view. */ FKey *pFKey; /* Linked list of all foreign keys in this table */ @@ -15650,6 +16865,7 @@ #define TF_StatsUsed 0x0100 /* Query planner decisions affected by ** Index.aiRowLogEst[] values */ #define TF_HasNotNull 0x0200 /* Contains NOT NULL constraints */ +#define TF_Shadow 0x0400 /* True for a shadow table */ /* ** Test to see whether or not a table is a virtual table. This is @@ -15760,15 +16976,14 @@ #define OE_Fail 3 /* Stop the operation but leave all prior changes */ #define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */ #define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */ +#define OE_Update 6 /* Process as a DO UPDATE in an upsert */ +#define OE_Restrict 7 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ +#define OE_SetNull 8 /* Set the foreign key value to NULL */ +#define OE_SetDflt 9 /* Set the foreign key value to its default */ +#define OE_Cascade 10 /* Cascade the changes */ +#define OE_Default 11 /* Do whatever the default action is */ -#define OE_Restrict 6 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ -#define OE_SetNull 7 /* Set the foreign key value to NULL */ -#define OE_SetDflt 8 /* Set the foreign key value to its default */ -#define OE_Cascade 9 /* Cascade the changes */ -#define OE_Default 10 /* Do whatever the default action is */ - - /* ** An instance of the following structure is passed as the first ** argument to sqlite3VdbeKeyCompare and is used to control the @@ -15781,8 +16996,8 @@ struct KeyInfo { u32 nRef; /* Number of references to this KeyInfo object */ u8 enc; /* Text encoding - one of the SQLITE_UTF* values */ - u16 nField; /* Number of key columns in the index */ - u16 nXField; /* Number of columns beyond the key columns */ + u16 nKeyField; /* Number of key columns in the index */ + u16 nAllField; /* Total columns, including key plus others */ sqlite3 *db; /* The database connection */ u8 *aSortOrder; /* Sort order for each column. */ CollSeq *aColl[1]; /* Collating sequence for each term of the key */ @@ -15829,8 +17044,8 @@ u16 nField; /* Number of entries in apMem[] */ i8 default_rc; /* Comparison result if keys are equal */ u8 errCode; /* Error detected by xRecordCompare (CORRUPT or NOMEM) */ - i8 r1; /* Value to return if (lhs > rhs) */ - i8 r2; /* Value to return if (rhs < lhs) */ + i8 r1; /* Value to return if (lhs < rhs) */ + i8 r2; /* Value to return if (lhs > rhs) */ u8 eqSeen; /* True if an equality comparison has been seen */ }; @@ -15893,6 +17108,7 @@ unsigned isCovering:1; /* True if this is a covering index */ unsigned noSkipScan:1; /* Do not try to use skip-scan if true */ unsigned hasStat1:1; /* aiRowLogEst values come from sqlite_stat1 */ + unsigned bNoQuery:1; /* Do not use this index to optimize queries */ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 int nSample; /* Number of elements in aSample[] */ int nSampleCol; /* Size of IndexSample.anEq[] and so on */ @@ -15901,6 +17117,7 @@ tRowcnt *aiRowEst; /* Non-logarithmic stat1 data for this index */ tRowcnt nRowEst0; /* Non-logarithmic number of rows in the index */ #endif + Bitmask colNotIdxed; /* 0 for unindexed columns in pTab */ }; /* @@ -15936,12 +17153,20 @@ }; /* +** Possible values to use within the flags argument to sqlite3GetToken(). +*/ +#define SQLITE_TOKEN_QUOTED 0x1 /* Token is a quoted identifier. */ +#define SQLITE_TOKEN_KEYWORD 0x2 /* Token is a keyword. */ + +/* ** Each token coming out of the lexer is an instance of ** this structure. Tokens are also used as part of an expression. ** -** Note if Token.z==0 then Token.dyn and Token.n are undefined and -** may contain random values. Do not make any assumptions about Token.dyn -** and Token.n when Token.z==0. +** The memory that "z" points to is owned by other objects. Take care +** that the owner of the "z" string does not deallocate the string before +** the Token goes out of scope! Very often, the "z" points to some place +** in the middle of the Parse.zSql text. But it might also point to a +** static string. */ struct Token { const char *z; /* Text of the token. Not NULL-terminated! */ @@ -16114,7 +17339,11 @@ ** TK_COLUMN: the value of p5 for OP_Column ** TK_AGG_FUNCTION: nesting depth */ AggInfo *pAggInfo; /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */ - Table *pTab; /* Table for TK_COLUMN expressions. */ + union { + Table *pTab; /* TK_COLUMN: Table containing column. Can be NULL + ** for a column of an index on an expression */ + Window *pWin; /* TK_FUNCTION: Window definition for the func */ + } y; }; /* @@ -16122,8 +17351,8 @@ */ #define EP_FromJoin 0x000001 /* Originates in ON/USING clause of outer join */ #define EP_Agg 0x000002 /* Contains one or more aggregate functions */ - /* 0x000004 // available for use */ - /* 0x000008 // available for use */ +#define EP_HasFunc 0x000004 /* Contains one or more functions of any kind */ +#define EP_FixedCol 0x000008 /* TK_Column with a known fixed value */ #define EP_Distinct 0x000010 /* Aggregate function with DISTINCT keyword */ #define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */ #define EP_DblQuoted 0x000040 /* token.z was originally in "..." */ @@ -16144,11 +17373,13 @@ #define EP_Subquery 0x200000 /* Tree contains a TK_SELECT operator */ #define EP_Alias 0x400000 /* Is an alias for a result set column */ #define EP_Leaf 0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */ +#define EP_WinFunc 0x1000000 /* TK_FUNCTION with Expr.y.pWin set */ /* -** Combinations of two or more EP_* flags +** The EP_Propagate mask is a set of properties that automatically propagate +** upwards into parent nodes. */ -#define EP_Propagate (EP_Collate|EP_Subquery) /* Propagate these bits up tree */ +#define EP_Propagate (EP_Collate|EP_Subquery|EP_HasFunc) /* ** These macros can be used to test, set, or clear bits in the @@ -16202,7 +17433,6 @@ */ struct ExprList { int nExpr; /* Number of expressions on the list */ - int nAlloc; /* Number of a[] slots allocated */ struct ExprList_item { /* For each expression in the list */ Expr *pExpr; /* The parse tree for this expression */ char *zName; /* Token associated with this expression */ @@ -16211,6 +17441,7 @@ unsigned done :1; /* A flag to indicate when processing is finished */ unsigned bSpanIsTab :1; /* zSpan holds DB.TABLE.COLUMN */ unsigned reusable :1; /* Constant expression is reusable */ + unsigned bSorterRef :1; /* Defer evaluation until after sorting */ union { struct { u16 iOrderByCol; /* For ORDER BY, column number in result set */ @@ -16222,17 +17453,6 @@ }; /* -** An instance of this structure is used by the parser to record both -** the parse tree for an expression and the span of input text for an -** expression. -*/ -struct ExprSpan { - Expr *pExpr; /* The expression parse tree */ - const char *zStart; /* First character of input text */ - const char *zEnd; /* One character past the end of input text */ -}; - -/* ** An instance of this structure can hold a simple list of identifiers, ** such as the list "a,b,c" in the following statements: ** @@ -16256,31 +17476,6 @@ }; /* -** The bitmask datatype defined below is used for various optimizations. -** -** Changing this from a 64-bit to a 32-bit type limits the number of -** tables in a join to 32 instead of 64. But it also reduces the size -** of the library by 738 bytes on ix86. -*/ -#ifdef SQLITE_BITMASK_TYPE - typedef SQLITE_BITMASK_TYPE Bitmask; -#else - typedef u64 Bitmask; -#endif - -/* -** The number of bits in a Bitmask. "BMS" means "BitMask Size". -*/ -#define BMS ((int)(sizeof(Bitmask)*8)) - -/* -** A bit in a Bitmask -*/ -#define MASKBIT(n) (((Bitmask)1)<<(n)) -#define MASKBIT32(n) (((unsigned int)1)<<(n)) -#define ALLBITS ((Bitmask)-1) - -/* ** The following structure describes the FROM clause of a SELECT statement. ** Each table or subquery in the FROM clause is a separate element of ** the SrcList.a[] array. @@ -16321,9 +17516,6 @@ unsigned viaCoroutine :1; /* Implemented as a co-routine */ unsigned isRecursive :1; /* True for recursive reference in WITH */ } fg; -#ifndef SQLITE_OMIT_EXPLAIN - u8 iSelectId; /* If pSelect!=0, the id of the sub-select in EQP */ -#endif int iCursor; /* The VDBE cursor number used to access this table */ Expr *pOn; /* The ON clause of a join */ IdList *pUsing; /* The USING clause of a join */ @@ -16405,12 +17597,16 @@ struct NameContext { Parse *pParse; /* The parser */ SrcList *pSrcList; /* One or more tables used to resolve names */ - ExprList *pEList; /* Optional list of result-set columns */ - AggInfo *pAggInfo; /* Information about aggregates at this level */ + union { + ExprList *pEList; /* Optional list of result-set columns */ + AggInfo *pAggInfo; /* Information about aggregates at this level */ + Upsert *pUpsert; /* ON CONFLICT clause information from an upsert */ + } uNC; NameContext *pNext; /* Next outer name context. NULL for outermost */ int nRef; /* Number of names resolved by this context */ int nErr; /* Number of errors encountered while resolving names */ u16 ncFlags; /* Zero or more NC_* flags defined below */ + Select *pWinSelect; /* SELECT statement for any window functions */ }; /* @@ -16428,17 +17624,49 @@ #define NC_HasAgg 0x0010 /* One or more aggregate functions seen */ #define NC_IdxExpr 0x0020 /* True if resolving columns of CREATE INDEX */ #define NC_VarSelect 0x0040 /* A correlated subquery has been seen */ +#define NC_UEList 0x0080 /* True if uNC.pEList is used */ +#define NC_UAggInfo 0x0100 /* True if uNC.pAggInfo is used */ +#define NC_UUpsert 0x0200 /* True if uNC.pUpsert is used */ #define NC_MinMaxAgg 0x1000 /* min/max aggregates seen. See note above */ +#define NC_Complex 0x2000 /* True if a function or subquery seen */ +#define NC_AllowWin 0x4000 /* Window functions are allowed here */ /* +** An instance of the following object describes a single ON CONFLICT +** clause in an upsert. +** +** The pUpsertTarget field is only set if the ON CONFLICT clause includes +** conflict-target clause. (In "ON CONFLICT(a,b)" the "(a,b)" is the +** conflict-target clause.) The pUpsertTargetWhere is the optional +** WHERE clause used to identify partial unique indexes. +** +** pUpsertSet is the list of column=expr terms of the UPDATE statement. +** The pUpsertSet field is NULL for a ON CONFLICT DO NOTHING. The +** pUpsertWhere is the WHERE clause for the UPDATE and is NULL if the +** WHERE clause is omitted. +*/ +struct Upsert { + ExprList *pUpsertTarget; /* Optional description of conflicting index */ + Expr *pUpsertTargetWhere; /* WHERE clause for partial index targets */ + ExprList *pUpsertSet; /* The SET clause from an ON CONFLICT UPDATE */ + Expr *pUpsertWhere; /* WHERE clause for the ON CONFLICT UPDATE */ + /* The fields above comprise the parse tree for the upsert clause. + ** The fields below are used to transfer information from the INSERT + ** processing down into the UPDATE processing while generating code. + ** Upsert owns the memory allocated above, but not the memory below. */ + Index *pUpsertIdx; /* Constraint that pUpsertTarget identifies */ + SrcList *pUpsertSrc; /* Table to be updated */ + int regData; /* First register holding array of VALUES */ + int iDataCur; /* Index of the data cursor */ + int iIdxCur; /* Index of the first index cursor */ +}; + +/* ** An instance of the following structure contains all information ** needed to generate code for a single SELECT statement. ** -** nLimit is set to -1 if there is no LIMIT clause. nOffset is set to 0. -** If there is a LIMIT clause, the parser sets nLimit to the value of the -** limit and nOffset to the value of the offset (or 0 if there is not -** offset). But later on, nLimit and nOffset become the memory locations -** in the VDBE that record the limit and offset counters. +** See the header comment on the computeLimitRegisters() routine for a +** detailed description of the meaning of the iLimit and iOffset fields. ** ** addrOpenEphm[] entries contain the address of OP_OpenEphemeral opcodes. ** These addresses must be stored so that we can go back and fill in @@ -16456,9 +17684,7 @@ LogEst nSelectRow; /* Estimated number of result rows */ u32 selFlags; /* Various SF_* values */ int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */ -#if SELECTTRACE_ENABLED - char zSelName[12]; /* Symbolic name of this SELECT use for debugging */ -#endif + u32 selId; /* Unique identifier number for this SELECT */ int addrOpenEphm[2]; /* OP_OpenEphem opcodes related to this select */ SrcList *pSrc; /* The FROM clause */ Expr *pWhere; /* The WHERE clause */ @@ -16468,8 +17694,11 @@ Select *pPrior; /* Prior select in a compound select statement */ Select *pNext; /* Next select to the left in a compound */ Expr *pLimit; /* LIMIT expression. NULL means not used. */ - Expr *pOffset; /* OFFSET expression. NULL means not used. */ With *pWith; /* WITH clause attached to this select. Or NULL. */ +#ifndef SQLITE_OMIT_WINDOWFUNC + Window *pWin; /* List of window functions */ + Window *pWinDefn; /* List of named window definitions */ +#endif }; /* @@ -16499,8 +17728,8 @@ #define SF_MaybeConvert 0x08000 /* Need convertCompoundSelectToSubquery() */ #define SF_Converted 0x10000 /* By convertCompoundSelectToSubquery() */ #define SF_IncludeHidden 0x20000 /* Include hidden columns in output */ +#define SF_ComplexResult 0x40000 /* Result contains subquery or function */ - /* ** The results of a SELECT can be distributed in several ways, as defined ** by one of the following macros. The "SRT" prefix means "SELECT Result @@ -16614,13 +17843,6 @@ }; /* -** Size of the column cache -*/ -#ifndef SQLITE_N_COLCACHE -# define SQLITE_N_COLCACHE 10 -#endif - -/* ** At least one instance of the following structure is created for each ** trigger that may be fired while parsing an INSERT, UPDATE or DELETE ** statement. All such objects are stored in the linked list headed at @@ -16695,7 +17917,6 @@ u8 hasCompound; /* Need to invoke convertCompoundSelectToSubquery() */ u8 okConstFactor; /* OK to factor out constants */ u8 disableLookaside; /* Number of times lookaside has been disabled */ - u8 nColCache; /* Number of entries in aColCache[] */ int nRangeReg; /* Size of the temporary register block */ int iRangeReg; /* First register in temporary register block */ int nErr; /* Number of errors seen */ @@ -16703,10 +17924,8 @@ int nMem; /* Number of memory cells used so far */ int nOpAlloc; /* Number of slots allocated for Vdbe.aOp[] */ int szOpAlloc; /* Bytes of memory space allocated for Vdbe.aOp[] */ - int iSelfTab; /* Table for associated with an index on expr, or negative + int iSelfTab; /* Table associated with an index on expr, or negative ** of the base register during check-constraint eval */ - int iCacheLevel; /* ColCache valid when aColCache[].iLevel<=iCacheLevel */ - int iCacheCnt; /* Counter used to generate aColCache[].lru values */ int nLabel; /* Number of labels used */ int *aLabel; /* Space to hold the labels */ ExprList *pConstExpr;/* Constant expressions */ @@ -16716,10 +17935,7 @@ int regRowid; /* Register holding rowid of CREATE TABLE entry */ int regRoot; /* Register holding root page number for new objects */ int nMaxArg; /* Max args passed to user function by sub-program */ -#if SELECTTRACE_ENABLED - int nSelect; /* Number of SELECT statements seen */ - int nSelectIndent; /* How far to indent SELECTTRACE() output */ -#endif + int nSelect; /* Number of SELECT stmts. Counter for Select.selId */ #ifndef SQLITE_OMIT_SHARED_CACHE int nTableLock; /* Number of locks in aTableLock */ TableLock *aTableLock; /* Required table locks for shared-cache mode */ @@ -16727,7 +17943,7 @@ AutoincInfo *pAinc; /* Information about AUTOINCREMENT counters */ Parse *pToplevel; /* Parse structure for main program (or NULL) */ Table *pTriggerTab; /* Table triggers are being coded for */ - int addrCrTab; /* Address of OP_CreateTable opcode on CREATE TABLE */ + int addrCrTab; /* Address of OP_CreateBtree opcode on CREATE TABLE */ u32 nQueryLoop; /* Est number of iterations of a query (10*log2(N)) */ u32 oldmask; /* Mask of old.* columns referenced */ u32 newmask; /* Mask of new.* columns referenced */ @@ -16739,17 +17955,9 @@ ** Fields above must be initialized to zero. The fields that follow, ** down to the beginning of the recursive section, do not need to be ** initialized as they will be set before being used. The boundary is - ** determined by offsetof(Parse,aColCache). + ** determined by offsetof(Parse,aTempReg). **************************************************************************/ - struct yColCache { - int iTable; /* Table cursor number */ - i16 iColumn; /* Table column number */ - u8 tempReg; /* iReg is a temp register that needs to be freed */ - int iLevel; /* Nesting level */ - int iReg; /* Reg with value of this column. 0 means none. */ - int lru; /* Least recently used entry has the smallest value */ - } aColCache[SQLITE_N_COLCACHE]; /* One for each column cache entry */ int aTempReg[8]; /* Holding area for temporary registers */ Token sNameToken; /* Token with unqualified schema object name */ @@ -16764,19 +17972,21 @@ ynVar nVar; /* Number of '?' variables seen in the SQL so far */ u8 iPkSortOrder; /* ASC or DESC for INTEGER PRIMARY KEY */ u8 explain; /* True if the EXPLAIN flag is found on the query */ +#if !(defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_OMIT_ALTERTABLE)) + u8 eParseMode; /* PARSE_MODE_XXX constant */ +#endif #ifndef SQLITE_OMIT_VIRTUALTABLE - u8 declareVtab; /* True if inside sqlite3_declare_vtab() */ int nVtabLock; /* Number of virtual tables to lock */ #endif int nHeight; /* Expression tree height of current sub-select */ #ifndef SQLITE_OMIT_EXPLAIN - int iSelectId; /* ID of current select for EXPLAIN output */ - int iNextSelectId; /* Next available select ID for EXPLAIN output */ + int addrExplain; /* Address of current OP_Explain opcode */ #endif VList *pVList; /* Mapping between variable names and numbers */ Vdbe *pReprepare; /* VM being reprepared (sqlite3Reprepare()) */ const char *zTail; /* All SQL text past the last semicolon parsed */ Table *pNewTable; /* A table being constructed by CREATE TABLE */ + Index *pNewIndex; /* An index being constructed by CREATE INDEX */ Trigger *pNewTrigger; /* Trigger under construct by a CREATE TRIGGER */ const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */ #ifndef SQLITE_OMIT_VIRTUALTABLE @@ -16787,12 +17997,20 @@ TriggerPrg *pTriggerPrg; /* Linked list of coded triggers */ With *pWith; /* Current WITH clause, or NULL */ With *pWithToFree; /* Free this WITH object at the end of the parse */ +#ifndef SQLITE_OMIT_ALTERTABLE + RenameToken *pRename; /* Tokens subject to renaming by ALTER TABLE */ +#endif }; +#define PARSE_MODE_NORMAL 0 +#define PARSE_MODE_DECLARE_VTAB 1 +#define PARSE_MODE_RENAME_COLUMN 2 +#define PARSE_MODE_RENAME_TABLE 3 + /* ** Sizes and pointers of various parts of the Parse object. */ -#define PARSE_HDR_SZ offsetof(Parse,aColCache) /* Recursive part w/o aColCache*/ +#define PARSE_HDR_SZ offsetof(Parse,aTempReg) /* Recursive part w/o aColCache*/ #define PARSE_RECURSE_SZ offsetof(Parse,sLastToken) /* Recursive part */ #define PARSE_TAIL_SZ (sizeof(Parse)-PARSE_RECURSE_SZ) /* Non-recursive part */ #define PARSE_TAIL(X) (((char*)(X))+PARSE_RECURSE_SZ) /* Pointer to tail */ @@ -16803,9 +18021,21 @@ #ifdef SQLITE_OMIT_VIRTUALTABLE #define IN_DECLARE_VTAB 0 #else - #define IN_DECLARE_VTAB (pParse->declareVtab) + #define IN_DECLARE_VTAB (pParse->eParseMode==PARSE_MODE_DECLARE_VTAB) #endif +#if defined(SQLITE_OMIT_ALTERTABLE) + #define IN_RENAME_OBJECT 0 +#else + #define IN_RENAME_OBJECT (pParse->eParseMode>=PARSE_MODE_RENAME_COLUMN) +#endif + +#if defined(SQLITE_OMIT_VIRTUALTABLE) && defined(SQLITE_OMIT_ALTERTABLE) + #define IN_SPECIAL_PARSE 0 +#else + #define IN_SPECIAL_PARSE (pParse->eParseMode!=PARSE_MODE_NORMAL) +#endif + /* ** An instance of the following structure can be declared on a stack and used ** to save the Parse.zAuthContext value so that it can be restored later. @@ -16829,6 +18059,7 @@ */ #define OPFLAG_NCHANGE 0x01 /* OP_Insert: Set to update db->nChange */ /* Also used in P2 (not P5) of OP_Delete */ +#define OPFLAG_NOCHNG 0x01 /* OP_VColumn nochange for UPDATE */ #define OPFLAG_EPHEM 0x01 /* OP_Column: Ephemeral output is ok */ #define OPFLAG_LASTROWID 0x20 /* Set to update db->lastRowid */ #define OPFLAG_ISUPDATE 0x04 /* This OP_Insert is an sql UPDATE */ @@ -16844,6 +18075,7 @@ #define OPFLAG_PERMUTE 0x01 /* OP_Compare: use the permutation */ #define OPFLAG_SAVEPOSITION 0x02 /* OP_Delete/Insert: save cursor pos */ #define OPFLAG_AUXDELETE 0x04 /* OP_Delete: index in a DELETE op */ +#define OPFLAG_NOCHNG_MAGIC 0x6d /* OP_MakeRecord: serialtype 10 is ok */ /* * Each trigger present in the database schema is stored as an instance of @@ -16929,8 +18161,10 @@ Select *pSelect; /* SELECT statement or RHS of INSERT INTO SELECT ... */ char *zTarget; /* Target table for DELETE, UPDATE, INSERT */ Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */ - ExprList *pExprList; /* SET clause for UPDATE. */ + ExprList *pExprList; /* SET clause for UPDATE */ IdList *pIdList; /* Column names for INSERT */ + Upsert *pUpsert; /* Upsert clauses on an INSERT */ + char *zSpan; /* Original SQL text of this command */ TriggerStep *pNext; /* Next in the link-list */ TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */ }; @@ -16954,18 +18188,15 @@ ** An objected used to accumulate the text of a string where we ** do not necessarily know how big the string will be in the end. */ -struct StrAccum { +struct sqlite3_str { sqlite3 *db; /* Optional database for lookaside. Can be NULL */ - char *zBase; /* A base allocation. Not from malloc. */ char *zText; /* The string collected so far */ - u32 nChar; /* Length of the string so far */ u32 nAlloc; /* Amount of space allocated in zText */ u32 mxAlloc; /* Maximum allowed allocation. 0 for no malloc usage */ - u8 accError; /* STRACCUM_NOMEM or STRACCUM_TOOBIG */ + u32 nChar; /* Length of the string so far */ + u8 accError; /* SQLITE_NOMEM or SQLITE_TOOBIG */ u8 printfFlags; /* SQLITE_PRINTF flags below */ }; -#define STRACCUM_NOMEM 1 -#define STRACCUM_TOOBIG 2 #define SQLITE_PRINTF_INTERNAL 0x01 /* Internal-use-only converters allowed */ #define SQLITE_PRINTF_SQLFUNC 0x02 /* SQL function arguments to VXPrintf */ #define SQLITE_PRINTF_MALLOCED 0x04 /* True if xText is allocated space */ @@ -16982,9 +18213,15 @@ char **pzErrMsg; /* Error message stored here */ int iDb; /* 0 for main database. 1 for TEMP, 2.. for ATTACHed */ int rc; /* Result code stored here */ + u32 mInitFlags; /* Flags controlling error messages */ } InitData; /* +** Allowed values for mInitFlags +*/ +#define INITFLAG_AlterTable 0x0001 /* This is a reparse after ALTER TABLE */ + +/* ** Structure containing global configuration data for the SQLite library. ** ** This structure also contains some state information. @@ -16995,6 +18232,7 @@ int bFullMutex; /* True to enable full mutexing */ int bOpenUri; /* True to interpret filenames as URIs */ int bUseCis; /* Use covering indices for full-scans */ + int bSmallMalloc; /* Avoid large memory allocations if true */ int mxStrlen; /* Maximum string length */ int neverCorrupt; /* Database is always well-formed */ int szLookaside; /* Default lookaside buffer size */ @@ -17008,9 +18246,6 @@ int mnReq, mxReq; /* Min and max heap requests sizes */ sqlite3_int64 szMmap; /* mmap() space per open file */ sqlite3_int64 mxMmap; /* Maximum value for szMmap */ - void *pScratch; /* Scratch memory */ - int szScratch; /* Size of each scratch buffer */ - int nScratch; /* Number of scratch buffers */ void *pPage; /* Page cache memory */ int szPage; /* Size of each page in pPage[] */ int nPage; /* Number of pages in pPage[] */ @@ -17036,7 +18271,7 @@ /* The following callback (if not NULL) is invoked on every VDBE branch ** operation. Set the callback using SQLITE_TESTCTRL_VDBE_COVERAGE. */ - void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx); /* Callback */ + void (*xVdbeBranch)(void*,unsigned iSrcLine,u8 eThis,u8 eMx); /* Callback */ void *pVdbeBranchArg; /* 1st argument */ #endif #ifndef SQLITE_UNTESTABLE @@ -17043,7 +18278,9 @@ int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */ #endif int bLocaltimeFault; /* True to fail localtime() calls */ + int bInternalFunctions; /* Internal SQL functions are visible */ int iOnceResetThreshold; /* When to reset OP_Once counters */ + u32 szSorterRef; /* Min size in bytes to use sorter-refs */ }; /* @@ -17083,9 +18320,12 @@ struct CCurHint *pCCurHint; /* Used by codeCursorHint() */ int *aiCol; /* array of column indexes */ struct IdxCover *pIdxCover; /* Check for index coverage */ - struct IdxExprTrans *pIdxTrans; /* Convert indexed expr to column */ + struct IdxExprTrans *pIdxTrans; /* Convert idxed expr to column */ ExprList *pGroupBy; /* GROUP BY clause */ - struct HavingToWhereCtx *pHavingCtx; /* HAVING to WHERE clause ctx */ + Select *pSelect; /* HAVING to WHERE clause ctx */ + struct WindowRewrite *pRewrite; /* Window rewrite context */ + struct WhereConst *pConst; /* WHERE clause constants */ + struct RenameCtx *pRename; /* RENAME COLUMN context */ } u; }; @@ -17097,6 +18337,7 @@ SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker*, Select*); SQLITE_PRIVATE int sqlite3ExprWalkNoop(Walker*, Expr*); SQLITE_PRIVATE int sqlite3SelectWalkNoop(Walker*, Select*); +SQLITE_PRIVATE int sqlite3SelectWalkFail(Walker*, Select*); #ifdef SQLITE_DEBUG SQLITE_PRIVATE void sqlite3SelectWalkAssert2(Walker*, Select*); #endif @@ -17136,6 +18377,68 @@ #endif /* SQLITE_DEBUG */ /* +** This object is used in varioius ways, all related to window functions +** +** (1) A single instance of this structure is attached to the +** the Expr.pWin field for each window function in an expression tree. +** This object holds the information contained in the OVER clause, +** plus additional fields used during code generation. +** +** (2) All window functions in a single SELECT form a linked-list +** attached to Select.pWin. The Window.pFunc and Window.pExpr +** fields point back to the expression that is the window function. +** +** (3) The terms of the WINDOW clause of a SELECT are instances of this +** object on a linked list attached to Select.pWinDefn. +** +** The uses (1) and (2) are really the same Window object that just happens +** to be accessible in two different ways. Use (3) is are separate objects. +*/ +struct Window { + char *zName; /* Name of window (may be NULL) */ + ExprList *pPartition; /* PARTITION BY clause */ + ExprList *pOrderBy; /* ORDER BY clause */ + u8 eType; /* TK_RANGE or TK_ROWS */ + u8 eStart; /* UNBOUNDED, CURRENT, PRECEDING or FOLLOWING */ + u8 eEnd; /* UNBOUNDED, CURRENT, PRECEDING or FOLLOWING */ + Expr *pStart; /* Expression for " PRECEDING" */ + Expr *pEnd; /* Expression for " FOLLOWING" */ + Window *pNextWin; /* Next window function belonging to this SELECT */ + Expr *pFilter; /* The FILTER expression */ + FuncDef *pFunc; /* The function */ + int iEphCsr; /* Partition buffer or Peer buffer */ + int regAccum; + int regResult; + int csrApp; /* Function cursor (used by min/max) */ + int regApp; /* Function register (also used by min/max) */ + int regPart; /* First in a set of registers holding PARTITION BY + ** and ORDER BY values for the window */ + Expr *pOwner; /* Expression object this window is attached to */ + int nBufferCol; /* Number of columns in buffer table */ + int iArgCol; /* Offset of first argument for this function */ +}; + +#ifndef SQLITE_OMIT_WINDOWFUNC +SQLITE_PRIVATE void sqlite3WindowDelete(sqlite3*, Window*); +SQLITE_PRIVATE void sqlite3WindowListDelete(sqlite3 *db, Window *p); +SQLITE_PRIVATE Window *sqlite3WindowAlloc(Parse*, int, int, Expr*, int , Expr*); +SQLITE_PRIVATE void sqlite3WindowAttach(Parse*, Expr*, Window*); +SQLITE_PRIVATE int sqlite3WindowCompare(Parse*, Window*, Window*); +SQLITE_PRIVATE void sqlite3WindowCodeInit(Parse*, Window*); +SQLITE_PRIVATE void sqlite3WindowCodeStep(Parse*, Select*, WhereInfo*, int, int); +SQLITE_PRIVATE int sqlite3WindowRewrite(Parse*, Select*); +SQLITE_PRIVATE int sqlite3ExpandSubquery(Parse*, struct SrcList_item*); +SQLITE_PRIVATE void sqlite3WindowUpdate(Parse*, Window*, Window*, FuncDef*); +SQLITE_PRIVATE Window *sqlite3WindowDup(sqlite3 *db, Expr *pOwner, Window *p); +SQLITE_PRIVATE Window *sqlite3WindowListDup(sqlite3 *db, Window *p); +SQLITE_PRIVATE void sqlite3WindowFunctions(void); +#else +# define sqlite3WindowDelete(a,b) +# define sqlite3WindowFunctions() +# define sqlite3WindowAttach(a,b,c) +#endif + +/* ** Assuming zIn points to the first byte of a UTF-8 character, ** advance zIn to point to the first byte of the next UTF-8 character. */ @@ -17152,6 +18455,7 @@ ** using sqlite3_log(). The routines also provide a convenient place ** to set a debugger breakpoint. */ +SQLITE_PRIVATE int sqlite3ReportError(int iErr, int lineno, const char *zType); SQLITE_PRIVATE int sqlite3CorruptError(int); SQLITE_PRIVATE int sqlite3MisuseError(int); SQLITE_PRIVATE int sqlite3CantopenError(int); @@ -17221,9 +18525,7 @@ # define sqlite3Tolower(x) tolower((unsigned char)(x)) # define sqlite3Isquote(x) ((x)=='"'||(x)=='\''||(x)=='['||(x)=='`') #endif -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS SQLITE_PRIVATE int sqlite3IsIdChar(u8); -#endif /* ** Internal function prototypes @@ -17230,6 +18532,7 @@ */ SQLITE_PRIVATE int sqlite3StrICmp(const char*,const char*); SQLITE_PRIVATE int sqlite3Strlen30(const char*); +#define sqlite3Strlen30NN(C) (strlen(C)&0x3fffffff) SQLITE_PRIVATE char *sqlite3ColumnType(Column*,char*); #define sqlite3StrNICmp sqlite3_strnicmp @@ -17242,6 +18545,7 @@ SQLITE_PRIVATE void *sqlite3DbMallocRawNN(sqlite3*, u64); SQLITE_PRIVATE char *sqlite3DbStrDup(sqlite3*,const char*); SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3*,const char*, u64); +SQLITE_PRIVATE char *sqlite3DbSpanDup(sqlite3*,const char*,const char*); SQLITE_PRIVATE void *sqlite3Realloc(void*, u64); SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64); SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *, void *, u64); @@ -17249,8 +18553,6 @@ SQLITE_PRIVATE void sqlite3DbFreeNN(sqlite3*, void*); SQLITE_PRIVATE int sqlite3MallocSize(void*); SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3*, void*); -SQLITE_PRIVATE void *sqlite3ScratchMalloc(int); -SQLITE_PRIVATE void sqlite3ScratchFree(void*); SQLITE_PRIVATE void *sqlite3PageMalloc(int); SQLITE_PRIVATE void sqlite3PageFree(void*); SQLITE_PRIVATE void sqlite3MemSetDefault(void); @@ -17306,11 +18608,18 @@ SQLITE_PRIVATE void sqlite3StatusUp(int, int); SQLITE_PRIVATE void sqlite3StatusDown(int, int); SQLITE_PRIVATE void sqlite3StatusHighwater(int, int); +SQLITE_PRIVATE int sqlite3LookasideUsed(sqlite3*,int*); /* Access to mutexes used by sqlite3_status() */ SQLITE_PRIVATE sqlite3_mutex *sqlite3Pcache1Mutex(void); SQLITE_PRIVATE sqlite3_mutex *sqlite3MallocMutex(void); +#if defined(SQLITE_ENABLE_MULTITHREADED_CHECKS) && !defined(SQLITE_MUTEX_OMIT) +SQLITE_PRIVATE void sqlite3MutexWarnOnContention(sqlite3_mutex*); +#else +# define sqlite3MutexWarnOnContention(x) +#endif + #ifndef SQLITE_OMIT_FLOATING_POINT SQLITE_PRIVATE int sqlite3IsNaN(double); #else @@ -17327,8 +18636,6 @@ sqlite3_value **apArg; /* The argument values */ }; -SQLITE_PRIVATE void sqlite3VXPrintf(StrAccum*, const char*, va_list); -SQLITE_PRIVATE void sqlite3XPrintf(StrAccum*, const char*, ...); SQLITE_PRIVATE char *sqlite3MPrintf(sqlite3*,const char*, ...); SQLITE_PRIVATE char *sqlite3VMPrintf(sqlite3*,const char*, va_list); #if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE) @@ -17342,9 +18649,14 @@ SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView*, const Expr*, u8); SQLITE_PRIVATE void sqlite3TreeViewBareExprList(TreeView*, const ExprList*, const char*); SQLITE_PRIVATE void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*); +SQLITE_PRIVATE void sqlite3TreeViewSrcList(TreeView*, const SrcList*); SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView*, const Select*, u8); SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView*, const With*, u8); +#ifndef SQLITE_OMIT_WINDOWFUNC +SQLITE_PRIVATE void sqlite3TreeViewWindow(TreeView*, const Window*, u8); +SQLITE_PRIVATE void sqlite3TreeViewWinFunc(TreeView*, const Window*, u8); #endif +#endif SQLITE_PRIVATE void sqlite3SetString(char **, sqlite3*, const char*); @@ -17368,7 +18680,7 @@ SQLITE_PRIVATE Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*); SQLITE_PRIVATE void sqlite3PExprAddSelect(Parse*, Expr*, Select*); SQLITE_PRIVATE Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*); -SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*); +SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*, int); SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*, u32); SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3*, Expr*); SQLITE_PRIVATE ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*); @@ -17375,11 +18687,12 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector(Parse*,ExprList*,IdList*,Expr*); SQLITE_PRIVATE void sqlite3ExprListSetSortOrder(ExprList*,int); SQLITE_PRIVATE void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int); -SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*); +SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,const char*,const char*); SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3*, ExprList*); SQLITE_PRIVATE u32 sqlite3ExprListFlags(const ExprList*); SQLITE_PRIVATE int sqlite3Init(sqlite3*, char**); SQLITE_PRIVATE int sqlite3InitCallback(void*, int, char**, char**); +SQLITE_PRIVATE int sqlite3InitOne(sqlite3*, int, char**, u32); SQLITE_PRIVATE void sqlite3Pragma(Parse*,Token*,Token*,Token*,int); #ifndef SQLITE_OMIT_VIRTUALTABLE SQLITE_PRIVATE Module *sqlite3PragmaVtabRegister(sqlite3*,const char *zName); @@ -17405,7 +18718,7 @@ SQLITE_PRIVATE void sqlite3AddNotNull(Parse*, int); SQLITE_PRIVATE void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int); SQLITE_PRIVATE void sqlite3AddCheckConstraint(Parse*, Expr*); -SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,ExprSpan*); +SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,Expr*,const char*,const char*); SQLITE_PRIVATE void sqlite3AddCollateType(Parse*, Token*); SQLITE_PRIVATE void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*); SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*, @@ -17429,8 +18742,9 @@ SQLITE_PRIVATE int sqlite3BitvecBuiltinTest(int,int*); #endif -SQLITE_PRIVATE RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int); -SQLITE_PRIVATE void sqlite3RowSetClear(RowSet*); +SQLITE_PRIVATE RowSet *sqlite3RowSetInit(sqlite3*); +SQLITE_PRIVATE void sqlite3RowSetDelete(void*); +SQLITE_PRIVATE void sqlite3RowSetClear(void*); SQLITE_PRIVATE void sqlite3RowSetInsert(RowSet*, i64); SQLITE_PRIVATE int sqlite3RowSetTest(RowSet*, int iBatch, i64); SQLITE_PRIVATE int sqlite3RowSetNext(RowSet*, i64*); @@ -17449,6 +18763,7 @@ SQLITE_PRIVATE void sqlite3DropTable(Parse*, SrcList*, int, int); SQLITE_PRIVATE void sqlite3CodeDropTable(Parse*, Table*, int, int); SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3*, Table*); +SQLITE_PRIVATE void sqlite3FreeIndex(sqlite3*, Index*); #ifndef SQLITE_OMIT_AUTOINCREMENT SQLITE_PRIVATE void sqlite3AutoincrementBegin(Parse *pParse); SQLITE_PRIVATE void sqlite3AutoincrementEnd(Parse *pParse); @@ -17456,9 +18771,9 @@ # define sqlite3AutoincrementBegin(X) # define sqlite3AutoincrementEnd(X) #endif -SQLITE_PRIVATE void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int); +SQLITE_PRIVATE void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int, Upsert*); SQLITE_PRIVATE void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*); -SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*); +SQLITE_PRIVATE IdList *sqlite3IdListAppend(Parse*, IdList*, Token*); SQLITE_PRIVATE int sqlite3IdListIndex(IdList*,const char*); SQLITE_PRIVATE SrcList *sqlite3SrcListEnlarge(sqlite3*, SrcList*, int, int); SQLITE_PRIVATE SrcList *sqlite3SrcListAppend(sqlite3*, SrcList*, Token*, Token*); @@ -17477,22 +18792,23 @@ SQLITE_PRIVATE void sqlite3DropIndex(Parse*, SrcList*, int); SQLITE_PRIVATE int sqlite3Select(Parse*, Select*, SelectDest*); SQLITE_PRIVATE Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*, - Expr*,ExprList*,u32,Expr*,Expr*); + Expr*,ExprList*,u32,Expr*); SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3*, Select*); SQLITE_PRIVATE Table *sqlite3SrcListLookup(Parse*, SrcList*); SQLITE_PRIVATE int sqlite3IsReadOnly(Parse*, Table*, int); SQLITE_PRIVATE void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int); #if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) -SQLITE_PRIVATE Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,Expr*,char*); +SQLITE_PRIVATE Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,char*); #endif -SQLITE_PRIVATE void sqlite3DeleteFrom(Parse*, SrcList*, Expr*); -SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int); +SQLITE_PRIVATE void sqlite3DeleteFrom(Parse*, SrcList*, Expr*, ExprList*, Expr*); +SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*,Expr*,int,ExprList*,Expr*, + Upsert*); SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int); SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo*); SQLITE_PRIVATE LogEst sqlite3WhereOutputRowCount(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo*); -SQLITE_PRIVATE int sqlite3WhereOrderedInnerLoop(WhereInfo*); +SQLITE_PRIVATE int sqlite3WhereOrderByLimitOptLabel(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo*); SQLITE_PRIVATE int sqlite3WhereBreakLabel(WhereInfo*); @@ -17502,15 +18818,8 @@ #define ONEPASS_MULTI 2 /* ONEPASS is valid for multiple rows */ SQLITE_PRIVATE void sqlite3ExprCodeLoadIndexColumn(Parse*, Index*, int, int, int); SQLITE_PRIVATE int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int, u8); -SQLITE_PRIVATE void sqlite3ExprCodeGetColumnToReg(Parse*, Table*, int, int, int); SQLITE_PRIVATE void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int); SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse*, int, int, int); -SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse*, int, int, int); -SQLITE_PRIVATE void sqlite3ExprCachePush(Parse*); -SQLITE_PRIVATE void sqlite3ExprCachePop(Parse*); -SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse*, int, int); -SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse*); -SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse*, int, int); SQLITE_PRIVATE void sqlite3ExprCode(Parse*, Expr*, int); SQLITE_PRIVATE void sqlite3ExprCodeCopy(Parse*, Expr*, int); SQLITE_PRIVATE void sqlite3ExprCodeFactorable(Parse*, Expr*, int); @@ -17541,6 +18850,7 @@ SQLITE_PRIVATE int sqlite3ExprCompareSkip(Expr*, Expr*, int); SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList*, ExprList*, int); SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Parse*,Expr*, Expr*, int); +SQLITE_PRIVATE int sqlite3ExprImpliesNonNullRow(Expr*,int); SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*); SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*); SQLITE_PRIVATE int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx); @@ -17558,6 +18868,8 @@ SQLITE_PRIVATE void sqlite3Savepoint(Parse*, int, Token*); SQLITE_PRIVATE void sqlite3CloseSavepoints(sqlite3 *); SQLITE_PRIVATE void sqlite3LeaveMutexAndCloseZombie(sqlite3*); +SQLITE_PRIVATE int sqlite3ExprIdToTrueFalse(Expr*); +SQLITE_PRIVATE int sqlite3ExprTruthValue(const Expr*); SQLITE_PRIVATE int sqlite3ExprIsConstant(Expr*); SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr*); SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr*, u8); @@ -17570,13 +18882,17 @@ SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr*); SQLITE_PRIVATE int sqlite3ExprNeedsNoAffinityChange(const Expr*, char); SQLITE_PRIVATE int sqlite3IsRowid(const char*); +#ifdef SQLITE_ENABLE_NORMALIZE +SQLITE_PRIVATE int sqlite3IsRowidN(const char*, int); +#endif SQLITE_PRIVATE void sqlite3GenerateRowDelete( Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8,int); SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*, int); SQLITE_PRIVATE int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int); SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse*,int); +SQLITE_PRIVATE int sqlite3ExprReferencesUpdatedColumn(Expr*,int*,int); SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int, - u8,u8,int,int*,int*); + u8,u8,int,int*,int*,Upsert*); #ifdef SQLITE_ENABLE_NULL_TRIM SQLITE_PRIVATE void sqlite3SetMakeRecordP5(Vdbe*,Table*); #else @@ -17595,10 +18911,8 @@ SQLITE_PRIVATE SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int); SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3*,IdList*); SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3*,Select*,int); -#if SELECTTRACE_ENABLED -SQLITE_PRIVATE void sqlite3SelectSetName(Select*,const char*); -#else -# define sqlite3SelectSetName(A,B) +#ifdef SQLITE_ENABLE_NORMALIZE +SQLITE_PRIVATE FuncDef *sqlite3FunctionSearchN(int,const char*,int); #endif SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs(FuncDef*,int); SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,u8,u8); @@ -17610,7 +18924,7 @@ SQLITE_PRIVATE void sqlite3ChangeCookie(Parse*, int); #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) -SQLITE_PRIVATE void sqlite3MaterializeView(Parse*, Table*, Expr*, int); +SQLITE_PRIVATE void sqlite3MaterializeView(Parse*, Table*, Expr*, ExprList*,Expr*,int); #endif #ifndef SQLITE_OMIT_TRIGGER @@ -17626,11 +18940,15 @@ SQLITE_PRIVATE void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int); void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*); SQLITE_PRIVATE void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*); -SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*); -SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*, - Select*,u8); -SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8); -SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*); +SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*, + const char*,const char*); +SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep(Parse*,Token*, IdList*, + Select*,u8,Upsert*, + const char*,const char*); +SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep(Parse*,Token*,ExprList*, Expr*, u8, + const char*,const char*); +SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(Parse*,Token*, Expr*, + const char*,const char*); SQLITE_PRIVATE void sqlite3DeleteTrigger(sqlite3*, Trigger*); SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*); SQLITE_PRIVATE u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int); @@ -17737,15 +19055,23 @@ SQLITE_PRIVATE const char *sqlite3ErrName(int); #endif +#ifdef SQLITE_ENABLE_DESERIALIZE +SQLITE_PRIVATE int sqlite3MemdbInit(void); +#endif + SQLITE_PRIVATE const char *sqlite3ErrStr(int); SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse); SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int); +SQLITE_PRIVATE int sqlite3IsBinary(const CollSeq*); SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName); SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr); +SQLITE_PRIVATE CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr); +SQLITE_PRIVATE int sqlite3ExprCollSeqMatch(Parse*,Expr*,Expr*); SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int); SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*); SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr*); SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *, CollSeq *); +SQLITE_PRIVATE int sqlite3WritableSchema(sqlite3*); SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *, const char *); SQLITE_PRIVATE void sqlite3VdbeSetChanges(sqlite3 *, int); SQLITE_PRIVATE int sqlite3AddInt64(i64*,i64); @@ -17783,13 +19109,20 @@ SQLITE_PRIVATE int sqlite3PendingByte; #endif #endif +#ifdef VDBE_PROFILE +SQLITE_PRIVATE sqlite3_uint64 sqlite3NProfileCnt; +#endif SQLITE_PRIVATE void sqlite3RootPageMoved(sqlite3*, int, int, int); SQLITE_PRIVATE void sqlite3Reindex(Parse*, Token*, Token*); SQLITE_PRIVATE void sqlite3AlterFunctions(void); SQLITE_PRIVATE void sqlite3AlterRenameTable(Parse*, SrcList*, Token*); +SQLITE_PRIVATE void sqlite3AlterRenameColumn(Parse*, SrcList*, Token*, Token*); SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *, int *); +#ifdef SQLITE_ENABLE_NORMALIZE +SQLITE_PRIVATE int sqlite3GetTokenNormalized(const unsigned char *, int *, int *); +#endif SQLITE_PRIVATE void sqlite3NestedParse(Parse*, const char*, ...); -SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3*); +SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3*, int); SQLITE_PRIVATE int sqlite3CodeSubselect(Parse*, Expr *, int, int); SQLITE_PRIVATE void sqlite3SelectPrep(Parse*, Select*, NameContext*); SQLITE_PRIVATE void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p); @@ -17802,10 +19135,14 @@ SQLITE_PRIVATE void sqlite3ColumnDefault(Vdbe *, Table *, int, int); SQLITE_PRIVATE void sqlite3AlterFinishAddColumn(Parse *, Token *); SQLITE_PRIVATE void sqlite3AlterBeginAddColumn(Parse *, SrcList *); +SQLITE_PRIVATE void *sqlite3RenameTokenMap(Parse*, void*, Token*); +SQLITE_PRIVATE void sqlite3RenameTokenRemap(Parse*, void *pTo, void *pFrom); +SQLITE_PRIVATE void sqlite3RenameExprUnmap(Parse*, Expr*); +SQLITE_PRIVATE void sqlite3RenameExprlistUnmap(Parse*, ExprList*); SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq(Parse*, u8, CollSeq *, const char*); -SQLITE_PRIVATE char sqlite3AffinityType(const char*, u8*); +SQLITE_PRIVATE char sqlite3AffinityType(const char*, Column*); SQLITE_PRIVATE void sqlite3Analyze(Parse*, Token*, Token*); -SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler*); +SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler*, sqlite3_file*); SQLITE_PRIVATE int sqlite3FindDb(sqlite3*, Token*); SQLITE_PRIVATE int sqlite3FindDbName(sqlite3 *, const char *); SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3*,int iDB); @@ -17820,14 +19157,20 @@ SQLITE_PRIVATE void sqlite3KeyInfoUnref(KeyInfo*); SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoRef(KeyInfo*); SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoOfIndex(Parse*, Index*); +SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoFromExprList(Parse*, ExprList*, int, int); + #ifdef SQLITE_DEBUG SQLITE_PRIVATE int sqlite3KeyInfoIsWriteable(KeyInfo*); #endif SQLITE_PRIVATE int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *, void (*)(sqlite3_context*,int,sqlite3_value **), - void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*), + void (*)(sqlite3_context*,int,sqlite3_value **), + void (*)(sqlite3_context*), + void (*)(sqlite3_context*), + void (*)(sqlite3_context*,int,sqlite3_value **), FuncDestructor *pDestructor ); +SQLITE_PRIVATE void sqlite3NoopDestructor(void*); SQLITE_PRIVATE void sqlite3OomFault(sqlite3*); SQLITE_PRIVATE void sqlite3OomClear(sqlite3*); SQLITE_PRIVATE int sqlite3ApiExit(sqlite3 *db, int); @@ -17834,11 +19177,7 @@ SQLITE_PRIVATE int sqlite3OpenTempDatabase(Parse *); SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum*, sqlite3*, char*, int, int); -SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum*,const char*,int); -SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum*,const char*); -SQLITE_PRIVATE void sqlite3AppendChar(StrAccum*,int,char); SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum*); -SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum*); SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest*,int,int); SQLITE_PRIVATE Expr *sqlite3CreateColumnExpr(sqlite3 *, SrcList *, int, int); @@ -17865,10 +19204,11 @@ ** The interface to the LEMON-generated parser */ #ifndef SQLITE_AMALGAMATION -SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64)); +SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64), Parse*); SQLITE_PRIVATE void sqlite3ParserFree(void*, void(*)(void*)); #endif -SQLITE_PRIVATE void sqlite3Parser(void*, int, Token, Parse*); +SQLITE_PRIVATE void sqlite3Parser(void*, int, Token); +SQLITE_PRIVATE int sqlite3ParserFallback(int); #ifdef YYTRACKMAXSTACKDEPTH SQLITE_PRIVATE int sqlite3ParserStackPeak(void*); #endif @@ -17934,11 +19274,13 @@ SQLITE_PRIVATE int sqlite3VtabCallDestroy(sqlite3*, int, const char *); SQLITE_PRIVATE int sqlite3VtabBegin(sqlite3 *, VTable *); SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*); -SQLITE_PRIVATE void sqlite3InvalidFunction(sqlite3_context*,int,sqlite3_value**); SQLITE_PRIVATE sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*); SQLITE_PRIVATE int sqlite3VdbeParameterIndex(Vdbe*, const char*, int); SQLITE_PRIVATE int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *); SQLITE_PRIVATE void sqlite3ParserReset(Parse*); +#ifdef SQLITE_ENABLE_NORMALIZE +SQLITE_PRIVATE void sqlite3Normalize(Vdbe*, const char*, int, u8); +#endif SQLITE_PRIVATE int sqlite3Reprepare(Vdbe*); SQLITE_PRIVATE void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*); SQLITE_PRIVATE CollSeq *sqlite3BinaryCompareCollSeq(Parse *, Expr *, Expr *); @@ -17956,7 +19298,19 @@ #define sqlite3WithPush(x,y,z) #define sqlite3WithDelete(x,y) #endif +#ifndef SQLITE_OMIT_UPSERT +SQLITE_PRIVATE Upsert *sqlite3UpsertNew(sqlite3*,ExprList*,Expr*,ExprList*,Expr*); +SQLITE_PRIVATE void sqlite3UpsertDelete(sqlite3*,Upsert*); +SQLITE_PRIVATE Upsert *sqlite3UpsertDup(sqlite3*,Upsert*); +SQLITE_PRIVATE int sqlite3UpsertAnalyzeTarget(Parse*,SrcList*,Upsert*); +SQLITE_PRIVATE void sqlite3UpsertDoUpdate(Parse*,Upsert*,Table*,Index*,int); +#else +#define sqlite3UpsertNew(v,w,x,y,z) ((Upsert*)0) +#define sqlite3UpsertDelete(x,y) +#define sqlite3UpsertDup(x,y) ((Upsert*)0) +#endif + /* Declarations for functions in fkey.c. All of these are replaced by ** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign ** key functionality is available. If OMIT_TRIGGER is defined but @@ -18025,7 +19379,8 @@ SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int); SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *); -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *); #endif @@ -18057,6 +19412,9 @@ #ifdef SQLITE_DEBUG SQLITE_PRIVATE void sqlite3ParserTrace(FILE*, char *); #endif +#if defined(YYCOVERAGE) +SQLITE_PRIVATE int sqlite3ParserCoverage(FILE*); +#endif /* ** If the SQLITE_ENABLE IOTRACE exists then the global variable @@ -18111,8 +19469,7 @@ #endif #define MEMTYPE_HEAP 0x01 /* General heap allocations */ #define MEMTYPE_LOOKASIDE 0x02 /* Heap that might have been lookaside */ -#define MEMTYPE_SCRATCH 0x04 /* Scratch allocations */ -#define MEMTYPE_PCACHE 0x08 /* Page cache allocations */ +#define MEMTYPE_PCACHE 0x04 /* Page cache allocations */ /* ** Threading interface @@ -18122,6 +19479,9 @@ SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread*, void**); #endif +#if defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST) +SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3*); +#endif #if defined(SQLITE_ENABLE_DBSTAT_VTAB) || defined(SQLITE_TEST) SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3*); #endif @@ -18341,6 +19701,7 @@ SQLITE_THREADSAFE==1, /* bFullMutex */ SQLITE_USE_URI, /* bOpenUri */ SQLITE_ALLOW_COVERING_INDEX_SCAN, /* bUseCis */ + 0, /* bSmallMalloc */ 0x7ffffffe, /* mxStrlen */ 0, /* neverCorrupt */ SQLITE_DEFAULT_LOOKASIDE, /* szLookaside, nLookaside */ @@ -18353,9 +19714,6 @@ 0, 0, /* mnHeap, mxHeap */ SQLITE_DEFAULT_MMAP_SIZE, /* szMmap */ SQLITE_MAX_MMAP_SIZE, /* mxMmap */ - (void*)0, /* pScratch */ - 0, /* szScratch */ - 0, /* nScratch */ (void*)0, /* pPage */ 0, /* szPage */ SQLITE_DEFAULT_PCACHE_INITSZ, /* nPage */ @@ -18384,7 +19742,9 @@ 0, /* xTestCallback */ #endif 0, /* bLocaltimeFault */ - 0x7ffffffe /* iOnceResetThreshold */ + 0, /* bInternalFunctions */ + 0x7ffffffe, /* iOnceResetThreshold */ + SQLITE_DEFAULT_SORTERREF_SIZE /* szSorterRef */ }; /* @@ -18402,6 +19762,13 @@ { "1", 1 } }; +#ifdef VDBE_PROFILE +/* +** The following performance counter can be used in place of +** sqlite3Hwtime() for profiling. This is a no-op on standard builds. +*/ +SQLITE_PRIVATE sqlite3_uint64 sqlite3NProfileCnt = 0; +#endif /* ** The value of the "pending" byte must be 0x40000000 (1 byte past the @@ -18546,6 +19913,7 @@ Bool isEphemeral:1; /* True for an ephemeral table */ Bool useRandomRowid:1; /* Generate new record numbers semi-randomly */ Bool isOrdered:1; /* True if the table is not BTREE_UNORDERED */ + Bool seekHit:1; /* See the OP_SeekHit and OP_IfNoHope opcodes */ Btree *pBtx; /* Separate file holding temporary table */ i64 seqCount; /* Sequence counter */ int *aAltMap; /* Mapping from table to index column numbers */ @@ -18557,8 +19925,9 @@ u32 cacheStatus; /* Cache is valid if this matches Vdbe.cacheCtr */ int seekResult; /* Result of previous sqlite3BtreeMoveto() or 0 ** if there have been no prior seeks on the cursor. */ - /* NB: seekResult does not distinguish between "no seeks have ever occurred - ** on this cursor" and "the most recent seek was an exact match". */ + /* seekResult does not distinguish between "no seeks have ever occurred + ** on this cursor" and "the most recent seek was an exact match". + ** For CURTYPE_PSEUDO, seekResult is the register holding the record */ /* When a new VdbeCursor is allocated, only the fields above are zeroed. ** The fields that follow are uninitialized, and must be individually @@ -18565,10 +19934,9 @@ ** initialized prior to first use. */ VdbeCursor *pAltCursor; /* Associated index cursor from which to read */ union { - BtCursor *pCursor; /* CURTYPE_BTREE. Btree cursor */ - sqlite3_vtab_cursor *pVCur; /* CURTYPE_VTAB. Vtab cursor */ - int pseudoTableReg; /* CURTYPE_PSEUDO. Reg holding content. */ - VdbeSorter *pSorter; /* CURTYPE_SORTER. Sorter object */ + BtCursor *pCursor; /* CURTYPE_BTREE or _PSEUDO. Btree cursor */ + sqlite3_vtab_cursor *pVCur; /* CURTYPE_VTAB. Vtab cursor */ + VdbeSorter *pSorter; /* CURTYPE_SORTER. Sorter object */ } uc; KeyInfo *pKeyInfo; /* Info about index keys needed by index cursors */ u32 iHdrOffset; /* Offset to next unparsed byte of the header */ @@ -18629,6 +19997,9 @@ void *token; /* Copy of SubProgram.token */ i64 lastRowid; /* Last insert rowid (sqlite3.lastRowid) */ AuxData *pAuxData; /* Linked list of auxdata allocations */ +#if SQLITE_DEBUG + u32 iFrameMagic; /* magic number for sanity checking */ +#endif int nCursor; /* Number of entries in apCsr */ int pc; /* Program Counter in parent (calling) frame */ int nOp; /* Size of aOp array */ @@ -18639,6 +20010,13 @@ int nDbChange; /* Value of db->nChange */ }; +/* Magic number for sanity checking on VdbeFrame objects */ +#define SQLITE_FRAME_MAGIC 0x879fb71e + +/* +** Return a pointer to the array of registers allocated for use +** by a VdbeFrame. +*/ #define VdbeFrameMem(p) ((Mem *)&((u8 *)p)[ROUND8(sizeof(VdbeFrame))]) /* @@ -18653,8 +20031,6 @@ int nZero; /* Extra zero bytes when MEM_Zero and MEM_Blob set */ const char *zPType; /* Pointer type when MEM_Term|MEM_Subtype|MEM_Null */ FuncDef *pDef; /* Used only when flags==MEM_Agg */ - RowSet *pRowSet; /* Used only when flags==MEM_RowSet */ - VdbeFrame *pFrame; /* Used when flags==MEM_Frame */ } u; u16 flags; /* Some combination of MEM_Null, MEM_Str, MEM_Dyn, etc. */ u8 enc; /* SQLITE_UTF8, SQLITE_UTF16BE, SQLITE_UTF16LE */ @@ -18669,7 +20045,7 @@ void (*xDel)(void*);/* Destructor for Mem.z - only valid if MEM_Dyn */ #ifdef SQLITE_DEBUG Mem *pScopyFrom; /* This Mem is a shallow copy of pScopyFrom */ - void *pFiller; /* So that sizeof(Mem) is a multiple of 8 */ + u16 mScopyFlags; /* flags value immediately after the shallow copy */ #endif }; @@ -18698,8 +20074,8 @@ #define MEM_Real 0x0008 /* Value is a real number */ #define MEM_Blob 0x0010 /* Value is a BLOB */ #define MEM_AffMask 0x001f /* Mask of affinity bits */ -#define MEM_RowSet 0x0020 /* Value is a RowSet object */ -#define MEM_Frame 0x0040 /* Value is a VdbeFrame object */ +/* Available 0x0020 */ +/* Available 0x0040 */ #define MEM_Undefined 0x0080 /* Value is undefined */ #define MEM_Cleared 0x0100 /* NULL set by OP_Null, not from data */ #define MEM_TypeMask 0xc1ff /* Mask of type bits */ @@ -18726,7 +20102,7 @@ ** that needs to be deallocated to avoid a leak. */ #define VdbeMemDynamic(X) \ - (((X)->flags&(MEM_Agg|MEM_Dyn|MEM_RowSet|MEM_Frame))!=0) + (((X)->flags&(MEM_Agg|MEM_Dyn))!=0) /* ** Clear any existing type flags from a Mem and replace them with f @@ -18778,7 +20154,6 @@ int iOp; /* Instruction number of OP_Function */ int isError; /* Error code returned by the function. */ u8 skipFlag; /* Skip accumulator loading if true */ - u8 fErrorOrAux; /* isError!=0 or pVdbe->pAuxData modified */ u8 argc; /* Number of arguments */ sqlite3_value *argv[1]; /* Argument set */ }; @@ -18841,14 +20216,15 @@ int nOp; /* Number of instructions in the program */ #ifdef SQLITE_DEBUG int rcApp; /* errcode set by sqlite3_result_error_code() */ + u32 nWrite; /* Number of write operations that have occurred */ #endif u16 nResColumn; /* Number of columns in one row of the result set */ u8 errorAction; /* Recovery action to do in case of an error */ u8 minWriteFileFormat; /* Minimum file format for writable database files */ u8 prepFlags; /* SQLITE_PREPARE_* flags */ - bft expired:1; /* True if the VM needs to be recompiled */ + bft expired:2; /* 1: recompile VM immediately 2: when convenient */ + bft explain:2; /* True if EXPLAIN present on SQL command */ bft doingRerun:1; /* True if rerunning after an auto-reprepare */ - bft explain:2; /* True if EXPLAIN present on SQL command */ bft changeCntOn:1; /* True to update the change-counter */ bft runOnlyOnce:1; /* Automatically expire on reset */ bft usesStmtJournal:1; /* True if uses a statement journal */ @@ -18858,6 +20234,9 @@ yDbMask lockMask; /* Subset of btreeMask that requires a lock */ u32 aCounter[7]; /* Counters used by sqlite3_stmt_status() */ char *zSql; /* Text of the SQL statement that generated this */ +#ifdef SQLITE_ENABLE_NORMALIZE + char *zNormSql; /* Normalization of the associated SQL statement */ +#endif void *pFree; /* Free this when deleting the vdbe */ VdbeFrame *pFrame; /* Parent frame */ VdbeFrame *pDelFrame; /* List of frame objects to free on VM reset */ @@ -18909,9 +20288,6 @@ void sqliteVdbePopStack(Vdbe*,int); SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor**, int*); SQLITE_PRIVATE int sqlite3VdbeCursorRestore(VdbeCursor*); -#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) -SQLITE_PRIVATE void sqlite3VdbePrintOp(FILE*, int, Op*); -#endif SQLITE_PRIVATE u32 sqlite3VdbeSerialTypeLen(u32); SQLITE_PRIVATE u8 sqlite3VdbeOneByteSerialTypeLen(u8); SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem*, int, u32*); @@ -18923,7 +20299,9 @@ SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(sqlite3*,VdbeCursor*,UnpackedRecord*,int*); SQLITE_PRIVATE int sqlite3VdbeIdxRowid(sqlite3*, BtCursor*, i64*); SQLITE_PRIVATE int sqlite3VdbeExec(Vdbe*); +#ifndef SQLITE_OMIT_EXPLAIN SQLITE_PRIVATE int sqlite3VdbeList(Vdbe*); +#endif SQLITE_PRIVATE int sqlite3VdbeHalt(Vdbe*); SQLITE_PRIVATE int sqlite3VdbeChangeEncoding(Mem *, int); SQLITE_PRIVATE int sqlite3VdbeMemTooBig(Mem*); @@ -18942,12 +20320,16 @@ SQLITE_PRIVATE void sqlite3VdbeMemInit(Mem*,sqlite3*,u16); SQLITE_PRIVATE void sqlite3VdbeMemSetNull(Mem*); SQLITE_PRIVATE void sqlite3VdbeMemSetZeroBlob(Mem*,int); -SQLITE_PRIVATE void sqlite3VdbeMemSetRowSet(Mem*); +#ifdef SQLITE_DEBUG +SQLITE_PRIVATE int sqlite3VdbeMemIsRowSet(const Mem*); +#endif +SQLITE_PRIVATE int sqlite3VdbeMemSetRowSet(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem*, u8, u8); SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemIntegerify(Mem*); SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem*); +SQLITE_PRIVATE int sqlite3VdbeBooleanValue(Mem*, int ifNull); SQLITE_PRIVATE void sqlite3VdbeIntegerAffinity(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem*); @@ -18955,11 +20337,20 @@ SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,Mem*); SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p); SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem*, FuncDef*); +#ifndef SQLITE_OMIT_WINDOWFUNC +SQLITE_PRIVATE int sqlite3VdbeMemAggValue(Mem*, Mem*, FuncDef*); +#endif +#ifndef SQLITE_OMIT_EXPLAIN SQLITE_PRIVATE const char *sqlite3OpcodeName(int); +#endif SQLITE_PRIVATE int sqlite3VdbeMemGrow(Mem *pMem, int n, int preserve); SQLITE_PRIVATE int sqlite3VdbeMemClearAndResize(Mem *pMem, int n); SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *, int); -SQLITE_PRIVATE void sqlite3VdbeFrameDelete(VdbeFrame*); +#ifdef SQLITE_DEBUG +SQLITE_PRIVATE int sqlite3VdbeFrameIsValid(VdbeFrame*); +#endif +SQLITE_PRIVATE void sqlite3VdbeFrameMemDel(void*); /* Destructor on Mem */ +SQLITE_PRIVATE void sqlite3VdbeFrameDelete(VdbeFrame*); /* Actually deletes the Frame */ SQLITE_PRIVATE int sqlite3VdbeFrameRestore(VdbeFrame *); #ifdef SQLITE_ENABLE_PREUPDATE_HOOK SQLITE_PRIVATE void sqlite3VdbePreUpdateHook(Vdbe*,VdbeCursor*,int,const char*,Table*,i64,int); @@ -18975,6 +20366,14 @@ SQLITE_PRIVATE int sqlite3VdbeSorterWrite(const VdbeCursor *, Mem *); SQLITE_PRIVATE int sqlite3VdbeSorterCompare(const VdbeCursor *, Mem *, int, int *); +#ifdef SQLITE_DEBUG +SQLITE_PRIVATE void sqlite3VdbeIncrWriteCounter(Vdbe*, VdbeCursor*); +SQLITE_PRIVATE void sqlite3VdbeAssertAbortable(Vdbe*); +#else +# define sqlite3VdbeIncrWriteCounter(V,C) +# define sqlite3VdbeAssertAbortable(V) +#endif + #if !defined(SQLITE_OMIT_SHARED_CACHE) SQLITE_PRIVATE void sqlite3VdbeEnter(Vdbe*); #else @@ -19126,7 +20525,6 @@ : sqlite3MallocMutex()) ); assert( op==SQLITE_STATUS_MALLOC_SIZE || op==SQLITE_STATUS_PAGECACHE_SIZE - || op==SQLITE_STATUS_SCRATCH_SIZE || op==SQLITE_STATUS_PARSER_STACK ); if( newValue>wsdStat.mxValue[op] ){ wsdStat.mxValue[op] = newValue; @@ -19176,6 +20574,28 @@ } /* +** Return the number of LookasideSlot elements on the linked list +*/ +static u32 countLookasideSlots(LookasideSlot *p){ + u32 cnt = 0; + while( p ){ + p = p->pNext; + cnt++; + } + return cnt; +} + +/* +** Count the number of slots of lookaside memory that are outstanding +*/ +SQLITE_PRIVATE int sqlite3LookasideUsed(sqlite3 *db, int *pHighwater){ + u32 nInit = countLookasideSlots(db->lookaside.pInit); + u32 nFree = countLookasideSlots(db->lookaside.pFree); + if( pHighwater ) *pHighwater = db->lookaside.nSlot - nInit; + return db->lookaside.nSlot - (nInit+nFree); +} + +/* ** Query status information for a single database connection */ SQLITE_API int sqlite3_db_status( @@ -19194,10 +20614,15 @@ sqlite3_mutex_enter(db->mutex); switch( op ){ case SQLITE_DBSTATUS_LOOKASIDE_USED: { - *pCurrent = db->lookaside.nOut; - *pHighwater = db->lookaside.mxOut; + *pCurrent = sqlite3LookasideUsed(db, pHighwater); if( resetFlag ){ - db->lookaside.mxOut = db->lookaside.nOut; + LookasideSlot *p = db->lookaside.pFree; + if( p ){ + while( p->pNext ) p = p->pNext; + p->pNext = db->lookaside.pInit; + db->lookaside.pInit = db->lookaside.pFree; + db->lookaside.pFree = 0; + } } break; } @@ -19315,6 +20740,9 @@ ** pagers the database handle is connected to. *pHighwater is always set ** to zero. */ + case SQLITE_DBSTATUS_CACHE_SPILL: + op = SQLITE_DBSTATUS_CACHE_WRITE+1; + /* Fall through into the next case */ case SQLITE_DBSTATUS_CACHE_HIT: case SQLITE_DBSTATUS_CACHE_MISS: case SQLITE_DBSTATUS_CACHE_WRITE:{ @@ -19397,7 +20825,7 @@ ** ** Jean Meeus ** Astronomical Algorithms, 2nd Edition, 1998 -** ISBM 0-943396-61-1 +** ISBN 0-943396-61-1 ** Willmann-Bell, Inc ** Richmond, Virginia (USA) */ @@ -20708,7 +22136,7 @@ } SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file *id, int flags){ DO_OS_MALLOC_TEST(id); - return id->pMethods->xSync(id, flags); + return flags ? id->pMethods->xSync(id, flags) : SQLITE_OK; } SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file *id, i64 *pSize){ DO_OS_MALLOC_TEST(id); @@ -20735,8 +22163,11 @@ ** routine has no return value since the return value would be meaningless. */ SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file *id, int op, void *pArg){ + if( id->pMethods==0 ) return SQLITE_NOTFOUND; #ifdef SQLITE_TEST - if( op!=SQLITE_FCNTL_COMMIT_PHASETWO ){ + if( op!=SQLITE_FCNTL_COMMIT_PHASETWO + && op!=SQLITE_FCNTL_LOCK_TIMEOUT + ){ /* Faults are not injected into COMMIT_PHASETWO because, assuming SQLite ** is using a regular VFS, it is called after the corresponding ** transaction has been committed. Injecting a fault at this point @@ -20753,7 +22184,7 @@ return id->pMethods->xFileControl(id, op, pArg); } SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file *id, int op, void *pArg){ - (void)id->pMethods->xFileControl(id, op, pArg); + if( id->pMethods ) (void)id->pMethods->xFileControl(id, op, pArg); } SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id){ @@ -20763,6 +22194,7 @@ SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id){ return id->pMethods->xDeviceCharacteristics(id); } +#ifndef SQLITE_OMIT_WAL SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int offset, int n, int flags){ return id->pMethods->xShmLock(id, offset, n, flags); } @@ -20782,6 +22214,7 @@ DO_OS_MALLOC_TEST(id); return id->pMethods->xShmMap(id, iPage, pgsz, bExtend, pp); } +#endif /* SQLITE_OMIT_WAL */ #if SQLITE_MAX_MMAP_SIZE>0 /* The real implementation of xFetch and xUnfetch */ @@ -21015,9 +22448,12 @@ ** Unregister a VFS so that it is no longer accessible. */ SQLITE_API int sqlite3_vfs_unregister(sqlite3_vfs *pVfs){ -#if SQLITE_THREADSAFE - sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); + MUTEX_LOGIC(sqlite3_mutex *mutex;) +#ifndef SQLITE_OMIT_AUTOINIT + int rc = sqlite3_initialize(); + if( rc ) return rc; #endif + MUTEX_LOGIC( mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); ) sqlite3_mutex_enter(mutex); vfsUnlink(pVfs); sqlite3_mutex_leave(mutex); @@ -23300,7 +24736,194 @@ #ifndef SQLITE_MUTEX_OMIT + +#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS /* +** This block (enclosed by SQLITE_ENABLE_MULTITHREADED_CHECKS) contains +** the implementation of a wrapper around the system default mutex +** implementation (sqlite3DefaultMutex()). +** +** Most calls are passed directly through to the underlying default +** mutex implementation. Except, if a mutex is configured by calling +** sqlite3MutexWarnOnContention() on it, then if contention is ever +** encountered within xMutexEnter() a warning is emitted via sqlite3_log(). +** +** This type of mutex is used as the database handle mutex when testing +** apps that usually use SQLITE_CONFIG_MULTITHREAD mode. +*/ + +/* +** Type for all mutexes used when SQLITE_ENABLE_MULTITHREADED_CHECKS +** is defined. Variable CheckMutex.mutex is a pointer to the real mutex +** allocated by the system mutex implementation. Variable iType is usually set +** to the type of mutex requested - SQLITE_MUTEX_RECURSIVE, SQLITE_MUTEX_FAST +** or one of the static mutex identifiers. Or, if this is a recursive mutex +** that has been configured using sqlite3MutexWarnOnContention(), it is +** set to SQLITE_MUTEX_WARNONCONTENTION. +*/ +typedef struct CheckMutex CheckMutex; +struct CheckMutex { + int iType; + sqlite3_mutex *mutex; +}; + +#define SQLITE_MUTEX_WARNONCONTENTION (-1) + +/* +** Pointer to real mutex methods object used by the CheckMutex +** implementation. Set by checkMutexInit(). +*/ +static SQLITE_WSD const sqlite3_mutex_methods *pGlobalMutexMethods; + +#ifdef SQLITE_DEBUG +static int checkMutexHeld(sqlite3_mutex *p){ + return pGlobalMutexMethods->xMutexHeld(((CheckMutex*)p)->mutex); +} +static int checkMutexNotheld(sqlite3_mutex *p){ + return pGlobalMutexMethods->xMutexNotheld(((CheckMutex*)p)->mutex); +} +#endif + +/* +** Initialize and deinitialize the mutex subsystem. +*/ +static int checkMutexInit(void){ + pGlobalMutexMethods = sqlite3DefaultMutex(); + return SQLITE_OK; +} +static int checkMutexEnd(void){ + pGlobalMutexMethods = 0; + return SQLITE_OK; +} + +/* +** Allocate a mutex. +*/ +static sqlite3_mutex *checkMutexAlloc(int iType){ + static CheckMutex staticMutexes[] = { + {2, 0}, {3, 0}, {4, 0}, {5, 0}, + {6, 0}, {7, 0}, {8, 0}, {9, 0}, + {10, 0}, {11, 0}, {12, 0}, {13, 0} + }; + CheckMutex *p = 0; + + assert( SQLITE_MUTEX_RECURSIVE==1 && SQLITE_MUTEX_FAST==0 ); + if( iType<2 ){ + p = sqlite3MallocZero(sizeof(CheckMutex)); + if( p==0 ) return 0; + p->iType = iType; + }else{ +#ifdef SQLITE_ENABLE_API_ARMOR + if( iType-2>=ArraySize(staticMutexes) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + p = &staticMutexes[iType-2]; + } + + if( p->mutex==0 ){ + p->mutex = pGlobalMutexMethods->xMutexAlloc(iType); + if( p->mutex==0 ){ + if( iType<2 ){ + sqlite3_free(p); + } + p = 0; + } + } + + return (sqlite3_mutex*)p; +} + +/* +** Free a mutex. +*/ +static void checkMutexFree(sqlite3_mutex *p){ + assert( SQLITE_MUTEX_RECURSIVE<2 ); + assert( SQLITE_MUTEX_FAST<2 ); + assert( SQLITE_MUTEX_WARNONCONTENTION<2 ); + +#if SQLITE_ENABLE_API_ARMOR + if( ((CheckMutex*)p)->iType<2 ) +#endif + { + CheckMutex *pCheck = (CheckMutex*)p; + pGlobalMutexMethods->xMutexFree(pCheck->mutex); + sqlite3_free(pCheck); + } +#ifdef SQLITE_ENABLE_API_ARMOR + else{ + (void)SQLITE_MISUSE_BKPT; + } +#endif +} + +/* +** Enter the mutex. +*/ +static void checkMutexEnter(sqlite3_mutex *p){ + CheckMutex *pCheck = (CheckMutex*)p; + if( pCheck->iType==SQLITE_MUTEX_WARNONCONTENTION ){ + if( SQLITE_OK==pGlobalMutexMethods->xMutexTry(pCheck->mutex) ){ + return; + } + sqlite3_log(SQLITE_MISUSE, + "illegal multi-threaded access to database connection" + ); + } + pGlobalMutexMethods->xMutexEnter(pCheck->mutex); +} + +/* +** Enter the mutex (do not block). +*/ +static int checkMutexTry(sqlite3_mutex *p){ + CheckMutex *pCheck = (CheckMutex*)p; + return pGlobalMutexMethods->xMutexTry(pCheck->mutex); +} + +/* +** Leave the mutex. +*/ +static void checkMutexLeave(sqlite3_mutex *p){ + CheckMutex *pCheck = (CheckMutex*)p; + pGlobalMutexMethods->xMutexLeave(pCheck->mutex); +} + +sqlite3_mutex_methods const *multiThreadedCheckMutex(void){ + static const sqlite3_mutex_methods sMutex = { + checkMutexInit, + checkMutexEnd, + checkMutexAlloc, + checkMutexFree, + checkMutexEnter, + checkMutexTry, + checkMutexLeave, +#ifdef SQLITE_DEBUG + checkMutexHeld, + checkMutexNotheld +#else + 0, + 0 +#endif + }; + return &sMutex; +} + +/* +** Mark the SQLITE_MUTEX_RECURSIVE mutex passed as the only argument as +** one on which there should be no contention. +*/ +SQLITE_PRIVATE void sqlite3MutexWarnOnContention(sqlite3_mutex *p){ + if( sqlite3GlobalConfig.mutex.xMutexAlloc==checkMutexAlloc ){ + CheckMutex *pCheck = (CheckMutex*)p; + assert( pCheck->iType==SQLITE_MUTEX_RECURSIVE ); + pCheck->iType = SQLITE_MUTEX_WARNONCONTENTION; + } +} +#endif /* ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS */ + +/* ** Initialize the mutex system. */ SQLITE_PRIVATE int sqlite3MutexInit(void){ @@ -23315,7 +24938,11 @@ sqlite3_mutex_methods *pTo = &sqlite3GlobalConfig.mutex; if( sqlite3GlobalConfig.bCoreMutex ){ +#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS + pFrom = multiThreadedCheckMutex(); +#else pFrom = sqlite3DefaultMutex(); +#endif }else{ pFrom = sqlite3NoopMutex(); } @@ -23714,11 +25341,12 @@ #endif }; #if SQLITE_MUTEX_NREF -#define SQLITE3_MUTEX_INITIALIZER {PTHREAD_MUTEX_INITIALIZER,0,0,(pthread_t)0,0} +# define SQLITE3_MUTEX_INITIALIZER(id) \ + {PTHREAD_MUTEX_INITIALIZER,id,0,(pthread_t)0,0} #elif defined(SQLITE_ENABLE_API_ARMOR) -#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER, 0 } +# define SQLITE3_MUTEX_INITIALIZER(id) { PTHREAD_MUTEX_INITIALIZER, id } #else -#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER } +#define SQLITE3_MUTEX_INITIALIZER(id) { PTHREAD_MUTEX_INITIALIZER } #endif /* @@ -23815,18 +25443,18 @@ */ static sqlite3_mutex *pthreadMutexAlloc(int iType){ static sqlite3_mutex staticMutexes[] = { - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER + SQLITE3_MUTEX_INITIALIZER(2), + SQLITE3_MUTEX_INITIALIZER(3), + SQLITE3_MUTEX_INITIALIZER(4), + SQLITE3_MUTEX_INITIALIZER(5), + SQLITE3_MUTEX_INITIALIZER(6), + SQLITE3_MUTEX_INITIALIZER(7), + SQLITE3_MUTEX_INITIALIZER(8), + SQLITE3_MUTEX_INITIALIZER(9), + SQLITE3_MUTEX_INITIALIZER(10), + SQLITE3_MUTEX_INITIALIZER(11), + SQLITE3_MUTEX_INITIALIZER(12), + SQLITE3_MUTEX_INITIALIZER(13) }; sqlite3_mutex *p; switch( iType ){ @@ -23845,6 +25473,9 @@ pthread_mutex_init(&p->mutex, &recursiveAttr); pthread_mutexattr_destroy(&recursiveAttr); #endif +#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR) + p->id = SQLITE_MUTEX_RECURSIVE; +#endif } break; } @@ -23852,6 +25483,9 @@ p = sqlite3MallocZero( sizeof(*p) ); if( p ){ pthread_mutex_init(&p->mutex, 0); +#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR) + p->id = SQLITE_MUTEX_FAST; +#endif } break; } @@ -23867,7 +25501,7 @@ } } #if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR) - if( p ) p->id = iType; + assert( p==0 || p->id==iType ); #endif return p; } @@ -24384,7 +26018,7 @@ #ifdef SQLITE_DEBUG volatile int nRef; /* Number of enterances */ volatile DWORD owner; /* Thread holding this mutex */ - volatile int trace; /* True to trace changes */ + volatile LONG trace; /* True to trace changes */ #endif }; @@ -24396,10 +26030,10 @@ #define SQLITE_W32_MUTEX_INITIALIZER { 0 } #ifdef SQLITE_DEBUG -#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, \ +#define SQLITE3_MUTEX_INITIALIZER(id) { SQLITE_W32_MUTEX_INITIALIZER, id, \ 0L, (DWORD)0, 0 } #else -#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 } +#define SQLITE3_MUTEX_INITIALIZER(id) { SQLITE_W32_MUTEX_INITIALIZER, id } #endif #ifdef SQLITE_DEBUG @@ -24442,18 +26076,18 @@ ** Initialize and deinitialize the mutex subsystem. */ static sqlite3_mutex winMutex_staticMutexes[] = { - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER + SQLITE3_MUTEX_INITIALIZER(2), + SQLITE3_MUTEX_INITIALIZER(3), + SQLITE3_MUTEX_INITIALIZER(4), + SQLITE3_MUTEX_INITIALIZER(5), + SQLITE3_MUTEX_INITIALIZER(6), + SQLITE3_MUTEX_INITIALIZER(7), + SQLITE3_MUTEX_INITIALIZER(8), + SQLITE3_MUTEX_INITIALIZER(9), + SQLITE3_MUTEX_INITIALIZER(10), + SQLITE3_MUTEX_INITIALIZER(11), + SQLITE3_MUTEX_INITIALIZER(12), + SQLITE3_MUTEX_INITIALIZER(13) }; static int winMutex_isInit = 0; @@ -24583,15 +26217,15 @@ } #endif p = &winMutex_staticMutexes[iType-2]; - p->id = iType; #ifdef SQLITE_DEBUG #ifdef SQLITE_WIN32_MUTEX_TRACE_STATIC - p->trace = 1; + InterlockedCompareExchange(&p->trace, 1, 0); #endif #endif break; } } + assert( p==0 || p->id==iType ); return p; } @@ -24779,14 +26413,6 @@ } /* -** An instance of the following object records the location of -** each unused scratch buffer. -*/ -typedef struct ScratchFreeslot { - struct ScratchFreeslot *pNext; /* Next unused scratch buffer */ -} ScratchFreeslot; - -/* ** State information local to the memory allocation subsystem. */ static SQLITE_WSD struct Mem0Global { @@ -24794,21 +26420,11 @@ sqlite3_int64 alarmThreshold; /* The soft heap limit */ /* - ** Pointers to the end of sqlite3GlobalConfig.pScratch memory - ** (so that a range test can be used to determine if an allocation - ** being freed came from pScratch) and a pointer to the list of - ** unused scratch allocations. - */ - void *pScratchEnd; - ScratchFreeslot *pScratchFree; - u32 nScratchFree; - - /* ** True if heap is nearly "full" where "full" is defined by the ** sqlite3_soft_heap_limit() setting. */ int nearlyFull; -} mem0 = { 0, 0, 0, 0, 0, 0 }; +} mem0 = { 0, 0, 0 }; #define mem0 GLOBAL(struct Mem0Global, mem0) @@ -24878,28 +26494,6 @@ } memset(&mem0, 0, sizeof(mem0)); mem0.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM); - if( sqlite3GlobalConfig.pScratch && sqlite3GlobalConfig.szScratch>=100 - && sqlite3GlobalConfig.nScratch>0 ){ - int i, n, sz; - ScratchFreeslot *pSlot; - sz = ROUNDDOWN8(sqlite3GlobalConfig.szScratch); - sqlite3GlobalConfig.szScratch = sz; - pSlot = (ScratchFreeslot*)sqlite3GlobalConfig.pScratch; - n = sqlite3GlobalConfig.nScratch; - mem0.pScratchFree = pSlot; - mem0.nScratchFree = n; - for(i=0; ipNext = (ScratchFreeslot*)(sz+(char*)pSlot); - pSlot = pSlot->pNext; - } - pSlot->pNext = 0; - mem0.pScratchEnd = (void*)&pSlot[1]; - }else{ - mem0.pScratchEnd = 0; - sqlite3GlobalConfig.pScratch = 0; - sqlite3GlobalConfig.szScratch = 0; - sqlite3GlobalConfig.nScratch = 0; - } if( sqlite3GlobalConfig.pPage==0 || sqlite3GlobalConfig.szPage<512 || sqlite3GlobalConfig.nPage<=0 ){ sqlite3GlobalConfig.pPage = 0; @@ -25051,105 +26645,6 @@ } /* -** Each thread may only have a single outstanding allocation from -** xScratchMalloc(). We verify this constraint in the single-threaded -** case by setting scratchAllocOut to 1 when an allocation -** is outstanding clearing it when the allocation is freed. -*/ -#if SQLITE_THREADSAFE==0 && !defined(NDEBUG) -static int scratchAllocOut = 0; -#endif - - -/* -** Allocate memory that is to be used and released right away. -** This routine is similar to alloca() in that it is not intended -** for situations where the memory might be held long-term. This -** routine is intended to get memory to old large transient data -** structures that would not normally fit on the stack of an -** embedded processor. -*/ -SQLITE_PRIVATE void *sqlite3ScratchMalloc(int n){ - void *p; - assert( n>0 ); - - sqlite3_mutex_enter(mem0.mutex); - sqlite3StatusHighwater(SQLITE_STATUS_SCRATCH_SIZE, n); - if( mem0.nScratchFree && sqlite3GlobalConfig.szScratch>=n ){ - p = mem0.pScratchFree; - mem0.pScratchFree = mem0.pScratchFree->pNext; - mem0.nScratchFree--; - sqlite3StatusUp(SQLITE_STATUS_SCRATCH_USED, 1); - sqlite3_mutex_leave(mem0.mutex); - }else{ - sqlite3_mutex_leave(mem0.mutex); - p = sqlite3Malloc(n); - if( sqlite3GlobalConfig.bMemstat && p ){ - sqlite3_mutex_enter(mem0.mutex); - sqlite3StatusUp(SQLITE_STATUS_SCRATCH_OVERFLOW, sqlite3MallocSize(p)); - sqlite3_mutex_leave(mem0.mutex); - } - sqlite3MemdebugSetType(p, MEMTYPE_SCRATCH); - } - assert( sqlite3_mutex_notheld(mem0.mutex) ); - - -#if SQLITE_THREADSAFE==0 && !defined(NDEBUG) - /* EVIDENCE-OF: R-12970-05880 SQLite will not use more than one scratch - ** buffers per thread. - ** - ** This can only be checked in single-threaded mode. - */ - assert( scratchAllocOut==0 ); - if( p ) scratchAllocOut++; -#endif - - return p; -} -SQLITE_PRIVATE void sqlite3ScratchFree(void *p){ - if( p ){ - -#if SQLITE_THREADSAFE==0 && !defined(NDEBUG) - /* Verify that no more than two scratch allocation per thread - ** is outstanding at one time. (This is only checked in the - ** single-threaded case since checking in the multi-threaded case - ** would be much more complicated.) */ - assert( scratchAllocOut>=1 && scratchAllocOut<=2 ); - scratchAllocOut--; -#endif - - if( SQLITE_WITHIN(p, sqlite3GlobalConfig.pScratch, mem0.pScratchEnd) ){ - /* Release memory from the SQLITE_CONFIG_SCRATCH allocation */ - ScratchFreeslot *pSlot; - pSlot = (ScratchFreeslot*)p; - sqlite3_mutex_enter(mem0.mutex); - pSlot->pNext = mem0.pScratchFree; - mem0.pScratchFree = pSlot; - mem0.nScratchFree++; - assert( mem0.nScratchFree <= (u32)sqlite3GlobalConfig.nScratch ); - sqlite3StatusDown(SQLITE_STATUS_SCRATCH_USED, 1); - sqlite3_mutex_leave(mem0.mutex); - }else{ - /* Release memory back to the heap */ - assert( sqlite3MemdebugHasType(p, MEMTYPE_SCRATCH) ); - assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_SCRATCH) ); - sqlite3MemdebugSetType(p, MEMTYPE_HEAP); - if( sqlite3GlobalConfig.bMemstat ){ - int iSize = sqlite3MallocSize(p); - sqlite3_mutex_enter(mem0.mutex); - sqlite3StatusDown(SQLITE_STATUS_SCRATCH_OVERFLOW, iSize); - sqlite3StatusDown(SQLITE_STATUS_MEMORY_USED, iSize); - sqlite3StatusDown(SQLITE_STATUS_MALLOC_COUNT, 1); - sqlite3GlobalConfig.m.xFree(p); - sqlite3_mutex_leave(mem0.mutex); - }else{ - sqlite3GlobalConfig.m.xFree(p); - } - } - } -} - -/* ** TRUE if p is a lookaside memory allocation from db */ #ifndef SQLITE_OMIT_LOOKASIDE @@ -25239,7 +26734,6 @@ #endif pBuf->pNext = db->lookaside.pFree; db->lookaside.pFree = pBuf; - db->lookaside.nOut--; return; } } @@ -25400,16 +26894,16 @@ assert( db->mallocFailed==0 ); if( n>db->lookaside.sz ){ db->lookaside.anStat[1]++; - }else if( (pBuf = db->lookaside.pFree)==0 ){ - db->lookaside.anStat[2]++; - }else{ + }else if( (pBuf = db->lookaside.pFree)!=0 ){ db->lookaside.pFree = pBuf->pNext; - db->lookaside.nOut++; db->lookaside.anStat[0]++; - if( db->lookaside.nOut>db->lookaside.mxOut ){ - db->lookaside.mxOut = db->lookaside.nOut; - } return (void*)pBuf; + }else if( (pBuf = db->lookaside.pInit)!=0 ){ + db->lookaside.pInit = pBuf->pNext; + db->lookaside.anStat[0]++; + return (void*)pBuf; + }else{ + db->lookaside.anStat[2]++; } }else if( db->mallocFailed ){ return 0; @@ -25514,6 +27008,19 @@ } /* +** The text between zStart and zEnd represents a phrase within a larger +** SQL statement. Make a copy of this phrase in space obtained form +** sqlite3DbMalloc(). Omit leading and trailing whitespace. +*/ +SQLITE_PRIVATE char *sqlite3DbSpanDup(sqlite3 *db, const char *zStart, const char *zEnd){ + int n; + while( sqlite3Isspace(zStart[0]) ) zStart++; + n = (int)(zEnd - zStart); + while( ALWAYS(n>0) && sqlite3Isspace(zStart[n-1]) ) n--; + return sqlite3DbStrNDup(db, zStart, n); +} + +/* ** Free any prior content in *pz and replace it with a copy of zNew. */ SQLITE_PRIVATE void sqlite3SetString(char **pz, sqlite3 *db, const char *zNew){ @@ -25725,7 +27232,7 @@ ** Set the StrAccum object to an error mode. */ static void setStrAccumError(StrAccum *p, u8 eError){ - assert( eError==STRACCUM_NOMEM || eError==STRACCUM_TOOBIG ); + assert( eError==SQLITE_NOMEM || eError==SQLITE_TOOBIG ); p->accError = eError; p->nAlloc = 0; } @@ -25759,8 +27266,8 @@ /* ** Render a string given by "fmt" into the StrAccum object. */ -SQLITE_PRIVATE void sqlite3VXPrintf( - StrAccum *pAccum, /* Accumulate results here */ +SQLITE_API void sqlite3_str_vappendf( + sqlite3_str *pAccum, /* Accumulate results here */ const char *fmt, /* Format string */ va_list ap /* arguments */ ){ @@ -25797,6 +27304,11 @@ PrintfArguments *pArgList = 0; /* Arguments for SQLITE_PRINTF_SQLFUNC */ char buf[etBUFSIZE]; /* Conversion buffer */ + /* pAccum never starts out with an empty buffer that was obtained from + ** malloc(). This precondition is required by the mprintf("%z...") + ** optimization. */ + assert( pAccum->nChar>0 || (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 ); + bufpt = 0; if( (pAccum->printfFlags & SQLITE_PRINTF_SQLFUNC)!=0 ){ pArgList = va_arg(ap, PrintfArguments*); @@ -25812,11 +27324,11 @@ #else do{ fmt++; }while( *fmt && *fmt != '%' ); #endif - sqlite3StrAccumAppend(pAccum, bufpt, (int)(fmt - bufpt)); + sqlite3_str_append(pAccum, bufpt, (int)(fmt - bufpt)); if( *fmt==0 ) break; } if( (c=(*++fmt))==0 ){ - sqlite3StrAccumAppend(pAccum, "%", 1); + sqlite3_str_append(pAccum, "%", 1); break; } /* Find out what flags are present */ @@ -25994,7 +27506,7 @@ u64 n = (u64)precision + 10 + precision/3; zOut = zExtra = sqlite3Malloc( n ); if( zOut==0 ){ - setStrAccumError(pAccum, STRACCUM_NOMEM); + setStrAccumError(pAccum, SQLITE_NOMEM); return; } nOut = (int)n; @@ -26119,7 +27631,7 @@ bufpt = zExtra = sqlite3Malloc( MAX(e2,0)+(i64)precision+(i64)width+15 ); if( bufpt==0 ){ - setStrAccumError(pAccum, STRACCUM_NOMEM); + setStrAccumError(pAccum, SQLITE_NOMEM); return; } } @@ -26215,22 +27727,52 @@ case etCHARX: if( bArgList ){ bufpt = getTextArg(pArgList); - c = bufpt ? bufpt[0] : 0; + length = 1; + if( bufpt ){ + buf[0] = c = *(bufpt++); + if( (c&0xc0)==0xc0 ){ + while( length<4 && (bufpt[0]&0xc0)==0x80 ){ + buf[length++] = *(bufpt++); + } + } + }else{ + buf[0] = 0; + } }else{ - c = va_arg(ap,int); + unsigned int ch = va_arg(ap,unsigned int); + if( ch<0x00080 ){ + buf[0] = ch & 0xff; + length = 1; + }else if( ch<0x00800 ){ + buf[0] = 0xc0 + (u8)((ch>>6)&0x1f); + buf[1] = 0x80 + (u8)(ch & 0x3f); + length = 2; + }else if( ch<0x10000 ){ + buf[0] = 0xe0 + (u8)((ch>>12)&0x0f); + buf[1] = 0x80 + (u8)((ch>>6) & 0x3f); + buf[2] = 0x80 + (u8)(ch & 0x3f); + length = 3; + }else{ + buf[0] = 0xf0 + (u8)((ch>>18) & 0x07); + buf[1] = 0x80 + (u8)((ch>>12) & 0x3f); + buf[2] = 0x80 + (u8)((ch>>6) & 0x3f); + buf[3] = 0x80 + (u8)(ch & 0x3f); + length = 4; + } } if( precision>1 ){ width -= precision-1; if( width>1 && !flag_leftjustify ){ - sqlite3AppendChar(pAccum, width-1, ' '); + sqlite3_str_appendchar(pAccum, width-1, ' '); width = 0; } - sqlite3AppendChar(pAccum, precision-1, c); + while( precision-- > 1 ){ + sqlite3_str_append(pAccum, buf, length); + } } - length = 1; - buf[0] = c; bufpt = buf; - break; + flag_altform2 = 1; + goto adjust_width_for_utf8; case etSTRING: case etDYNSTRING: if( bArgList ){ @@ -26242,17 +27784,50 @@ if( bufpt==0 ){ bufpt = ""; }else if( xtype==etDYNSTRING ){ + if( pAccum->nChar==0 + && pAccum->mxAlloc + && width==0 + && precision<0 + && pAccum->accError==0 + ){ + /* Special optimization for sqlite3_mprintf("%z..."): + ** Extend an existing memory allocation rather than creating + ** a new one. */ + assert( (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 ); + pAccum->zText = bufpt; + pAccum->nAlloc = sqlite3DbMallocSize(pAccum->db, bufpt); + pAccum->nChar = 0x7fffffff & (int)strlen(bufpt); + pAccum->printfFlags |= SQLITE_PRINTF_MALLOCED; + length = 0; + break; + } zExtra = bufpt; } if( precision>=0 ){ - for(length=0; length 0 && z[0] ){ + SQLITE_SKIP_UTF8(z); + } + length = (int)(z - (unsigned char*)bufpt); + }else{ + for(length=0; length0 ){ + /* Adjust width to account for extra bytes in UTF-8 characters */ + int ii = length - 1; + while( ii>=0 ) if( (bufpt[ii--] & 0xc0)==0x80 ) width++; + } break; - case etSQLESCAPE: /* Escape ' characters */ - case etSQLESCAPE2: /* Escape ' and enclose in '...' */ - case etSQLESCAPE3: { /* Escape " characters */ + case etSQLESCAPE: /* %q: Escape ' characters */ + case etSQLESCAPE2: /* %Q: Escape ' and enclose in '...' */ + case etSQLESCAPE3: { /* %w: Escape " characters */ int i, j, k, n, isnull; int needQuote; char ch; @@ -26266,9 +27841,17 @@ } isnull = escarg==0; if( isnull ) escarg = (xtype==etSQLESCAPE2 ? "NULL" : "(NULL)"); + /* For %q, %Q, and %w, the precision is the number of byte (or + ** characters if the ! flags is present) to use from the input. + ** Because of the extra quoting characters inserted, the number + ** of output characters may be larger than the precision. + */ k = precision; for(i=n=0; k!=0 && (ch=escarg[i])!=0; i++, k--){ if( ch==q ) n++; + if( flag_altform2 && (ch&0xc0)==0xc0 ){ + while( (escarg[i+1]&0xc0)==0x80 ){ i++; } + } } needQuote = !isnull && xtype==etSQLESCAPE2; n += i + 3; @@ -26275,7 +27858,7 @@ if( n>etBUFSIZE ){ bufpt = zExtra = sqlite3Malloc( n ); if( bufpt==0 ){ - setStrAccumError(pAccum, STRACCUM_NOMEM); + setStrAccumError(pAccum, SQLITE_NOMEM); return; } }else{ @@ -26291,10 +27874,7 @@ if( needQuote ) bufpt[j++] = q; bufpt[j] = 0; length = j; - /* The precision in %q and %Q means how many input characters to - ** consume, not the length of the output... - ** if( precision>=0 && precisionn ){ - sqlite3StrAccumAppend(pAccum, (const char*)pToken->z, pToken->n); + sqlite3_str_append(pAccum, (const char*)pToken->z, pToken->n); } length = width = 0; break; @@ -26318,10 +27898,10 @@ assert( bArgList==0 ); assert( k>=0 && knSrc ); if( pItem->zDatabase ){ - sqlite3StrAccumAppendAll(pAccum, pItem->zDatabase); - sqlite3StrAccumAppend(pAccum, ".", 1); + sqlite3_str_appendall(pAccum, pItem->zDatabase); + sqlite3_str_append(pAccum, ".", 1); } - sqlite3StrAccumAppendAll(pAccum, pItem->zName); + sqlite3_str_appendall(pAccum, pItem->zName); length = width = 0; break; } @@ -26333,15 +27913,18 @@ /* ** The text of the conversion is pointed to by "bufpt" and is ** "length" characters long. The field width is "width". Do - ** the output. + ** the output. Both length and width are in bytes, not characters, + ** at this point. If the "!" flag was present on string conversions + ** indicating that width and precision should be expressed in characters, + ** then the values have been translated prior to reaching this point. */ width -= length; if( width>0 ){ - if( !flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' '); - sqlite3StrAccumAppend(pAccum, bufpt, length); - if( flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' '); + if( !flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' '); + sqlite3_str_append(pAccum, bufpt, length); + if( flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' '); }else{ - sqlite3StrAccumAppend(pAccum, bufpt, length); + sqlite3_str_append(pAccum, bufpt, length); } if( zExtra ){ @@ -26362,18 +27945,17 @@ char *zNew; assert( p->nChar+(i64)N >= p->nAlloc ); /* Only called if really needed */ if( p->accError ){ - testcase(p->accError==STRACCUM_TOOBIG); - testcase(p->accError==STRACCUM_NOMEM); + testcase(p->accError==SQLITE_TOOBIG); + testcase(p->accError==SQLITE_NOMEM); return 0; } if( p->mxAlloc==0 ){ N = p->nAlloc - p->nChar - 1; - setStrAccumError(p, STRACCUM_TOOBIG); + setStrAccumError(p, SQLITE_TOOBIG); return N; }else{ char *zOld = isMalloced(p) ? p->zText : 0; i64 szNew = p->nChar; - assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) ); szNew += N + 1; if( szNew+p->nChar<=p->mxAlloc ){ /* Force exponential buffer size growth as long as it does not overflow, @@ -26381,8 +27963,8 @@ szNew += p->nChar; } if( szNew > p->mxAlloc ){ - sqlite3StrAccumReset(p); - setStrAccumError(p, STRACCUM_TOOBIG); + sqlite3_str_reset(p); + setStrAccumError(p, SQLITE_TOOBIG); return 0; }else{ p->nAlloc = (int)szNew; @@ -26399,8 +27981,8 @@ p->nAlloc = sqlite3DbMallocSize(p->db, zNew); p->printfFlags |= SQLITE_PRINTF_MALLOCED; }else{ - sqlite3StrAccumReset(p); - setStrAccumError(p, STRACCUM_NOMEM); + sqlite3_str_reset(p); + setStrAccumError(p, SQLITE_NOMEM); return 0; } } @@ -26410,12 +27992,11 @@ /* ** Append N copies of character c to the given string buffer. */ -SQLITE_PRIVATE void sqlite3AppendChar(StrAccum *p, int N, char c){ +SQLITE_API void sqlite3_str_appendchar(sqlite3_str *p, int N, char c){ testcase( p->nChar + (i64)N > 0x7fffffff ); if( p->nChar+(i64)N >= p->nAlloc && (N = sqlite3StrAccumEnlarge(p, N))<=0 ){ return; } - assert( (p->zText==p->zBase)==!isMalloced(p) ); while( (N--)>0 ) p->zText[p->nChar++] = c; } @@ -26423,9 +28004,9 @@ ** The StrAccum "p" is not large enough to accept N new bytes of z[]. ** So enlarge if first, then do the append. ** -** This is a helper routine to sqlite3StrAccumAppend() that does special-case +** This is a helper routine to sqlite3_str_append() that does special-case ** work (enlarging the buffer) using tail recursion, so that the -** sqlite3StrAccumAppend() routine can use fast calling semantics. +** sqlite3_str_append() routine can use fast calling semantics. */ static void SQLITE_NOINLINE enlargeAndAppend(StrAccum *p, const char *z, int N){ N = sqlite3StrAccumEnlarge(p, N); @@ -26433,7 +28014,6 @@ memcpy(&p->zText[p->nChar], z, N); p->nChar += N; } - assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) ); } /* @@ -26440,7 +28020,7 @@ ** Append N bytes of text from z to the StrAccum object. Increase the ** size of the memory allocation for StrAccum if necessary. */ -SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){ +SQLITE_API void sqlite3_str_append(sqlite3_str *p, const char *z, int N){ assert( z!=0 || N==0 ); assert( p->zText!=0 || p->nChar==0 || p->accError ); assert( N>=0 ); @@ -26457,8 +28037,8 @@ /* ** Append the complete text of zero-terminated string z[] to the p string. */ -SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum *p, const char *z){ - sqlite3StrAccumAppend(p, z, sqlite3Strlen30(z)); +SQLITE_API void sqlite3_str_appendall(sqlite3_str *p, const char *z){ + sqlite3_str_append(p, z, sqlite3Strlen30(z)); } @@ -26468,19 +28048,20 @@ ** pointer if any kind of error was encountered. */ static SQLITE_NOINLINE char *strAccumFinishRealloc(StrAccum *p){ + char *zText; assert( p->mxAlloc>0 && !isMalloced(p) ); - p->zText = sqlite3DbMallocRaw(p->db, p->nChar+1 ); - if( p->zText ){ - memcpy(p->zText, p->zBase, p->nChar+1); + zText = sqlite3DbMallocRaw(p->db, p->nChar+1 ); + if( zText ){ + memcpy(zText, p->zText, p->nChar+1); p->printfFlags |= SQLITE_PRINTF_MALLOCED; }else{ - setStrAccumError(p, STRACCUM_NOMEM); + setStrAccumError(p, SQLITE_NOMEM); } - return p->zText; + p->zText = zText; + return zText; } SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum *p){ if( p->zText ){ - assert( (p->zText==p->zBase)==!isMalloced(p) ); p->zText[p->nChar] = 0; if( p->mxAlloc>0 && !isMalloced(p) ){ return strAccumFinishRealloc(p); @@ -26490,14 +28071,55 @@ } /* +** This singleton is an sqlite3_str object that is returned if +** sqlite3_malloc() fails to provide space for a real one. This +** sqlite3_str object accepts no new text and always returns +** an SQLITE_NOMEM error. +*/ +static sqlite3_str sqlite3OomStr = { + 0, 0, 0, 0, 0, SQLITE_NOMEM, 0 +}; + +/* Finalize a string created using sqlite3_str_new(). +*/ +SQLITE_API char *sqlite3_str_finish(sqlite3_str *p){ + char *z; + if( p!=0 && p!=&sqlite3OomStr ){ + z = sqlite3StrAccumFinish(p); + sqlite3_free(p); + }else{ + z = 0; + } + return z; +} + +/* Return any error code associated with p */ +SQLITE_API int sqlite3_str_errcode(sqlite3_str *p){ + return p ? p->accError : SQLITE_NOMEM; +} + +/* Return the current length of p in bytes */ +SQLITE_API int sqlite3_str_length(sqlite3_str *p){ + return p ? p->nChar : 0; +} + +/* Return the current value for p */ +SQLITE_API char *sqlite3_str_value(sqlite3_str *p){ + if( p==0 || p->nChar==0 ) return 0; + p->zText[p->nChar] = 0; + return p->zText; +} + +/* ** Reset an StrAccum string. Reclaim all malloced memory. */ -SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum *p){ - assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) ); +SQLITE_API void sqlite3_str_reset(StrAccum *p){ if( isMalloced(p) ){ sqlite3DbFree(p->db, p->zText); p->printfFlags &= ~SQLITE_PRINTF_MALLOCED; } + p->nAlloc = 0; + p->nChar = 0; p->zText = 0; } @@ -26516,15 +28138,27 @@ ** allocations will ever occur. */ SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum *p, sqlite3 *db, char *zBase, int n, int mx){ - p->zText = p->zBase = zBase; + p->zText = zBase; p->db = db; - p->nChar = 0; p->nAlloc = n; p->mxAlloc = mx; + p->nChar = 0; p->accError = 0; p->printfFlags = 0; } +/* Allocate and initialize a new dynamic string object */ +SQLITE_API sqlite3_str *sqlite3_str_new(sqlite3 *db){ + sqlite3_str *p = sqlite3_malloc64(sizeof(*p)); + if( p ){ + sqlite3StrAccumInit(p, 0, 0, 0, + db ? db->aLimit[SQLITE_LIMIT_LENGTH] : SQLITE_MAX_LENGTH); + }else{ + p = &sqlite3OomStr; + } + return p; +} + /* ** Print into memory obtained from sqliteMalloc(). Use the internal ** %-conversion extensions. @@ -26537,9 +28171,9 @@ sqlite3StrAccumInit(&acc, db, zBase, sizeof(zBase), db->aLimit[SQLITE_LIMIT_LENGTH]); acc.printfFlags = SQLITE_PRINTF_INTERNAL; - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); z = sqlite3StrAccumFinish(&acc); - if( acc.accError==STRACCUM_NOMEM ){ + if( acc.accError==SQLITE_NOMEM ){ sqlite3OomFault(db); } return z; @@ -26577,7 +28211,7 @@ if( sqlite3_initialize() ) return 0; #endif sqlite3StrAccumInit(&acc, 0, zBase, sizeof(zBase), SQLITE_MAX_LENGTH); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); z = sqlite3StrAccumFinish(&acc); return z; } @@ -26622,7 +28256,7 @@ } #endif sqlite3StrAccumInit(&acc, 0, zBuf, n, 0); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); zBuf[acc.nChar] = 0; return zBuf; } @@ -26644,7 +28278,7 @@ ** allocate memory because it might be called while the memory allocator ** mutex is held. ** -** sqlite3VXPrintf() might ask for *temporary* memory allocations for +** sqlite3_str_vappendf() might ask for *temporary* memory allocations for ** certain format characters (%q) or for very large precisions or widths. ** Care must be taken that any sqlite3_log() calls that occur while the ** memory mutex is held do not use these mechanisms. @@ -26654,7 +28288,7 @@ char zMsg[SQLITE_PRINT_BUF_SIZE*3]; /* Complete log message */ sqlite3StrAccumInit(&acc, 0, zMsg, sizeof(zMsg), 0); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); sqlite3GlobalConfig.xLog(sqlite3GlobalConfig.pLogArg, iErrCode, sqlite3StrAccumFinish(&acc)); } @@ -26683,23 +28317,30 @@ char zBuf[500]; sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); va_start(ap,zFormat); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); va_end(ap); sqlite3StrAccumFinish(&acc); +#ifdef SQLITE_OS_TRACE_PROC + { + extern void SQLITE_OS_TRACE_PROC(const char *zBuf, int nBuf); + SQLITE_OS_TRACE_PROC(zBuf, sizeof(zBuf)); + } +#else fprintf(stdout,"%s", zBuf); fflush(stdout); +#endif } #endif /* -** variable-argument wrapper around sqlite3VXPrintf(). The bFlags argument +** variable-argument wrapper around sqlite3_str_vappendf(). The bFlags argument ** can contain the bit SQLITE_PRINTF_INTERNAL enable internal formats. */ -SQLITE_PRIVATE void sqlite3XPrintf(StrAccum *p, const char *zFormat, ...){ +SQLITE_API void sqlite3_str_appendf(StrAccum *p, const char *zFormat, ...){ va_list ap; va_start(ap,zFormat); - sqlite3VXPrintf(p, zFormat, ap); + sqlite3_str_vappendf(p, zFormat, ap); va_end(ap); } @@ -26765,15 +28406,17 @@ sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); if( p ){ for(i=0; iiLevel && ibLine)-1; i++){ - sqlite3StrAccumAppend(&acc, p->bLine[i] ? "| " : " ", 4); + sqlite3_str_append(&acc, p->bLine[i] ? "| " : " ", 4); } - sqlite3StrAccumAppend(&acc, p->bLine[i] ? "|-- " : "'-- ", 4); + sqlite3_str_append(&acc, p->bLine[i] ? "|-- " : "'-- ", 4); } - va_start(ap, zFormat); - sqlite3VXPrintf(&acc, zFormat, ap); - va_end(ap); - assert( acc.nChar>0 ); - if( zBuf[acc.nChar-1]!='\n' ) sqlite3StrAccumAppend(&acc, "\n", 1); + if( zFormat!=0 ){ + va_start(ap, zFormat); + sqlite3_str_vappendf(&acc, zFormat, ap); + va_end(ap); + assert( acc.nChar>0 ); + sqlite3_str_append(&acc, "\n", 1); + } sqlite3StrAccumFinish(&acc); fprintf(stdout,"%s", zBuf); fflush(stdout); @@ -26806,17 +28449,17 @@ char zLine[1000]; const struct Cte *pCte = &pWith->a[i]; sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0); - sqlite3XPrintf(&x, "%s", pCte->zName); + sqlite3_str_appendf(&x, "%s", pCte->zName); if( pCte->pCols && pCte->pCols->nExpr>0 ){ char cSep = '('; int j; for(j=0; jpCols->nExpr; j++){ - sqlite3XPrintf(&x, "%c%s", cSep, pCte->pCols->a[j].zName); + sqlite3_str_appendf(&x, "%c%s", cSep, pCte->pCols->a[j].zName); cSep = ','; } - sqlite3XPrintf(&x, ")"); + sqlite3_str_appendf(&x, ")"); } - sqlite3XPrintf(&x, " AS"); + sqlite3_str_appendf(&x, " AS"); sqlite3StrAccumFinish(&x); sqlite3TreeViewItem(pView, zLine, inCte-1); sqlite3TreeViewSelect(pView, pCte->pSelect, 0); @@ -26826,6 +28469,42 @@ } } +/* +** Generate a human-readable description of a SrcList object. +*/ +SQLITE_PRIVATE void sqlite3TreeViewSrcList(TreeView *pView, const SrcList *pSrc){ + int i; + for(i=0; inSrc; i++){ + const struct SrcList_item *pItem = &pSrc->a[i]; + StrAccum x; + char zLine[100]; + sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0); + sqlite3_str_appendf(&x, "{%d,*}", pItem->iCursor); + if( pItem->zDatabase ){ + sqlite3_str_appendf(&x, " %s.%s", pItem->zDatabase, pItem->zName); + }else if( pItem->zName ){ + sqlite3_str_appendf(&x, " %s", pItem->zName); + } + if( pItem->pTab ){ + sqlite3_str_appendf(&x, " tabname=%Q", pItem->pTab->zName); + } + if( pItem->zAlias ){ + sqlite3_str_appendf(&x, " (AS %s)", pItem->zAlias); + } + if( pItem->fg.jointype & JT_LEFT ){ + sqlite3_str_appendf(&x, " LEFT-JOIN"); + } + sqlite3StrAccumFinish(&x); + sqlite3TreeViewItem(pView, zLine, inSrc-1); + if( pItem->pSelect ){ + sqlite3TreeViewSelect(pView, pItem->pSelect, 0); + } + if( pItem->fg.isTabFunc ){ + sqlite3TreeViewExprList(pView, pItem->u1.pFuncArg, 0, "func-args:"); + } + sqlite3TreeViewPop(pView); + } +} /* ** Generate a human-readable description of a Select object. @@ -26844,9 +28523,11 @@ sqlite3TreeViewPush(pView, 1); } do{ - sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x nSelectRow=%d", + sqlite3TreeViewLine(pView, + "SELECT%s%s (%u/%p) selFlags=0x%x nSelectRow=%d", ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""), - ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), p, p->selFlags, + ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), + p->selId, p, p->selFlags, (int)p->nSelectRow ); if( cnt++ ) sqlite3TreeViewPop(pView); @@ -26860,43 +28541,27 @@ if( p->pHaving ) n++; if( p->pOrderBy ) n++; if( p->pLimit ) n++; - if( p->pOffset ) n++; +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWin ) n++; + if( p->pWinDefn ) n++; +#endif } sqlite3TreeViewExprList(pView, p->pEList, (n--)>0, "result-set"); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWin ){ + Window *pX; + pView = sqlite3TreeViewPush(pView, (n--)>0); + sqlite3TreeViewLine(pView, "window-functions"); + for(pX=p->pWin; pX; pX=pX->pNextWin){ + sqlite3TreeViewWinFunc(pView, pX, pX->pNextWin!=0); + } + sqlite3TreeViewPop(pView); + } +#endif if( p->pSrc && p->pSrc->nSrc ){ - int i; pView = sqlite3TreeViewPush(pView, (n--)>0); sqlite3TreeViewLine(pView, "FROM"); - for(i=0; ipSrc->nSrc; i++){ - struct SrcList_item *pItem = &p->pSrc->a[i]; - StrAccum x; - char zLine[100]; - sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0); - sqlite3XPrintf(&x, "{%d,*}", pItem->iCursor); - if( pItem->zDatabase ){ - sqlite3XPrintf(&x, " %s.%s", pItem->zDatabase, pItem->zName); - }else if( pItem->zName ){ - sqlite3XPrintf(&x, " %s", pItem->zName); - } - if( pItem->pTab ){ - sqlite3XPrintf(&x, " tabname=%Q", pItem->pTab->zName); - } - if( pItem->zAlias ){ - sqlite3XPrintf(&x, " (AS %s)", pItem->zAlias); - } - if( pItem->fg.jointype & JT_LEFT ){ - sqlite3XPrintf(&x, " LEFT-JOIN"); - } - sqlite3StrAccumFinish(&x); - sqlite3TreeViewItem(pView, zLine, ipSrc->nSrc-1); - if( pItem->pSelect ){ - sqlite3TreeViewSelect(pView, pItem->pSelect, 0); - } - if( pItem->fg.isTabFunc ){ - sqlite3TreeViewExprList(pView, pItem->u1.pFuncArg, 0, "func-args:"); - } - sqlite3TreeViewPop(pView); - } + sqlite3TreeViewSrcList(pView, p->pSrc); sqlite3TreeViewPop(pView); } if( p->pWhere ){ @@ -26912,19 +28577,29 @@ sqlite3TreeViewExpr(pView, p->pHaving, 0); sqlite3TreeViewPop(pView); } +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWinDefn ){ + Window *pX; + sqlite3TreeViewItem(pView, "WINDOW", (n--)>0); + for(pX=p->pWinDefn; pX; pX=pX->pNextWin){ + sqlite3TreeViewWindow(pView, pX, pX->pNextWin!=0); + } + sqlite3TreeViewPop(pView); + } +#endif if( p->pOrderBy ){ sqlite3TreeViewExprList(pView, p->pOrderBy, (n--)>0, "ORDERBY"); } if( p->pLimit ){ sqlite3TreeViewItem(pView, "LIMIT", (n--)>0); - sqlite3TreeViewExpr(pView, p->pLimit, 0); + sqlite3TreeViewExpr(pView, p->pLimit->pLeft, p->pLimit->pRight!=0); + if( p->pLimit->pRight ){ + sqlite3TreeViewItem(pView, "OFFSET", (n--)>0); + sqlite3TreeViewExpr(pView, p->pLimit->pRight, 0); + sqlite3TreeViewPop(pView); + } sqlite3TreeViewPop(pView); } - if( p->pOffset ){ - sqlite3TreeViewItem(pView, "OFFSET", (n--)>0); - sqlite3TreeViewExpr(pView, p->pOffset, 0); - sqlite3TreeViewPop(pView); - } if( p->pPrior ){ const char *zOp = "UNION"; switch( p->op ){ @@ -26939,7 +28614,84 @@ sqlite3TreeViewPop(pView); } +#ifndef SQLITE_OMIT_WINDOWFUNC /* +** Generate a description of starting or stopping bounds +*/ +SQLITE_PRIVATE void sqlite3TreeViewBound( + TreeView *pView, /* View context */ + u8 eBound, /* UNBOUNDED, CURRENT, PRECEDING, FOLLOWING */ + Expr *pExpr, /* Value for PRECEDING or FOLLOWING */ + u8 moreToFollow /* True if more to follow */ +){ + switch( eBound ){ + case TK_UNBOUNDED: { + sqlite3TreeViewItem(pView, "UNBOUNDED", moreToFollow); + sqlite3TreeViewPop(pView); + break; + } + case TK_CURRENT: { + sqlite3TreeViewItem(pView, "CURRENT", moreToFollow); + sqlite3TreeViewPop(pView); + break; + } + case TK_PRECEDING: { + sqlite3TreeViewItem(pView, "PRECEDING", moreToFollow); + sqlite3TreeViewExpr(pView, pExpr, 0); + sqlite3TreeViewPop(pView); + break; + } + case TK_FOLLOWING: { + sqlite3TreeViewItem(pView, "FOLLOWING", moreToFollow); + sqlite3TreeViewExpr(pView, pExpr, 0); + sqlite3TreeViewPop(pView); + break; + } + } +} +#endif /* SQLITE_OMIT_WINDOWFUNC */ + +#ifndef SQLITE_OMIT_WINDOWFUNC +/* +** Generate a human-readable explanation for a Window object +*/ +SQLITE_PRIVATE void sqlite3TreeViewWindow(TreeView *pView, const Window *pWin, u8 more){ + pView = sqlite3TreeViewPush(pView, more); + if( pWin->zName ){ + sqlite3TreeViewLine(pView, "OVER %s", pWin->zName); + }else{ + sqlite3TreeViewLine(pView, "OVER"); + } + if( pWin->pPartition ){ + sqlite3TreeViewExprList(pView, pWin->pPartition, 1, "PARTITION-BY"); + } + if( pWin->pOrderBy ){ + sqlite3TreeViewExprList(pView, pWin->pOrderBy, 1, "ORDER-BY"); + } + if( pWin->eType ){ + sqlite3TreeViewItem(pView, pWin->eType==TK_RANGE ? "RANGE" : "ROWS", 0); + sqlite3TreeViewBound(pView, pWin->eStart, pWin->pStart, 1); + sqlite3TreeViewBound(pView, pWin->eEnd, pWin->pEnd, 0); + sqlite3TreeViewPop(pView); + } + sqlite3TreeViewPop(pView); +} +#endif /* SQLITE_OMIT_WINDOWFUNC */ + +#ifndef SQLITE_OMIT_WINDOWFUNC +/* +** Generate a human-readable explanation for a Window Function object +*/ +SQLITE_PRIVATE void sqlite3TreeViewWinFunc(TreeView *pView, const Window *pWin, u8 more){ + pView = sqlite3TreeViewPush(pView, more); + sqlite3TreeViewLine(pView, "WINFUNC %s(%d)", + pWin->pFunc->zName, pWin->pFunc->nArg); + sqlite3TreeViewWindow(pView, pWin, 0); + sqlite3TreeViewPop(pView); +} +#endif /* SQLITE_OMIT_WINDOWFUNC */ + +/* ** Generate a human-readable explanation of an expression tree. */ SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 moreToFollow){ @@ -26976,6 +28728,9 @@ sqlite3TreeViewLine(pView, "{%d:%d}%s", pExpr->iTable, pExpr->iColumn, zFlgs); } + if( ExprHasProperty(pExpr, EP_FixedCol) ){ + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); + } break; } case TK_INTEGER: { @@ -27000,6 +28755,11 @@ sqlite3TreeViewLine(pView,"NULL"); break; } + case TK_TRUEFALSE: { + sqlite3TreeViewLine(pView, + sqlite3ExprTruthValue(pExpr) ? "TRUE" : "FALSE"); + break; + } #ifndef SQLITE_OMIT_BLOB_LITERAL case TK_BLOB: { sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken); @@ -27056,6 +28816,19 @@ case TK_ISNULL: zUniOp = "ISNULL"; break; case TK_NOTNULL: zUniOp = "NOTNULL"; break; + case TK_TRUTH: { + int x; + const char *azOp[] = { + "IS-FALSE", "IS-TRUE", "IS-NOT-FALSE", "IS-NOT-TRUE" + }; + assert( pExpr->op2==TK_IS || pExpr->op2==TK_ISNOT ); + assert( pExpr->pRight ); + assert( pExpr->pRight->op==TK_TRUEFALSE ); + x = (pExpr->op2==TK_ISNOT)*2 + sqlite3ExprTruthValue(pExpr->pRight); + zUniOp = azOp[x]; + break; + } + case TK_SPAN: { sqlite3TreeViewLine(pView, "SPAN %Q", pExpr->u.zToken); sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); @@ -27071,10 +28844,17 @@ case TK_AGG_FUNCTION: case TK_FUNCTION: { ExprList *pFarg; /* List of function arguments */ + Window *pWin; if( ExprHasProperty(pExpr, EP_TokenOnly) ){ pFarg = 0; + pWin = 0; }else{ pFarg = pExpr->x.pList; +#ifndef SQLITE_OMIT_WINDOWFUNC + pWin = pExpr->y.pWin; +#else + pWin = 0; +#endif } if( pExpr->op==TK_AGG_FUNCTION ){ sqlite3TreeViewLine(pView, "AGG_FUNCTION%d %Q", @@ -27083,8 +28863,13 @@ sqlite3TreeViewLine(pView, "FUNCTION %Q", pExpr->u.zToken); } if( pFarg ){ - sqlite3TreeViewExprList(pView, pFarg, 0, 0); + sqlite3TreeViewExprList(pView, pFarg, pWin!=0, 0); } +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pWin ){ + sqlite3TreeViewWindow(pView, pWin, 0); + } +#endif break; } #ifndef SQLITE_OMIT_SUBQUERY @@ -27215,12 +29000,25 @@ sqlite3TreeViewLine(pView, "%s", zLabel); for(i=0; inExpr; i++){ int j = pList->a[i].u.x.iOrderByCol; - if( j ){ - sqlite3TreeViewPush(pView, 0); - sqlite3TreeViewLine(pView, "iOrderByCol=%d", j); + char *zName = pList->a[i].zName; + int moreToFollow = inExpr - 1; + if( j || zName ){ + sqlite3TreeViewPush(pView, moreToFollow); + moreToFollow = 0; + sqlite3TreeViewLine(pView, 0); + if( zName ){ + fprintf(stdout, "AS %s ", zName); + } + if( j ){ + fprintf(stdout, "iOrderByCol=%d", j); + } + fprintf(stdout, "\n"); + fflush(stdout); } - sqlite3TreeViewExpr(pView, pList->a[i].pExpr, inExpr-1); - if( j ) sqlite3TreeViewPop(pView); + sqlite3TreeViewExpr(pView, pList->a[i].pExpr, moreToFollow); + if( j || zName ){ + sqlite3TreeViewPop(pView); + } } } } @@ -28511,6 +30309,45 @@ } /* +** Compute 10 to the E-th power. Examples: E==1 results in 10. +** E==2 results in 100. E==50 results in 1.0e50. +** +** This routine only works for values of E between 1 and 341. +*/ +static LONGDOUBLE_TYPE sqlite3Pow10(int E){ +#if defined(_MSC_VER) + static const LONGDOUBLE_TYPE x[] = { + 1.0e+001, + 1.0e+002, + 1.0e+004, + 1.0e+008, + 1.0e+016, + 1.0e+032, + 1.0e+064, + 1.0e+128, + 1.0e+256 + }; + LONGDOUBLE_TYPE r = 1.0; + int i; + assert( E>=0 && E<=307 ); + for(i=0; E!=0; i++, E >>=1){ + if( E & 1 ) r *= x[i]; + } + return r; +#else + LONGDOUBLE_TYPE x = 10.0; + LONGDOUBLE_TYPE r = 1.0; + while(1){ + if( E & 1 ) r *= x; + E >>= 1; + if( E==0 ) break; + x *= x; + } + return r; +#endif +} + +/* ** The string z[] is an text representation of a real number. ** Convert this string to a double and write it into *pResult. ** @@ -28577,12 +30414,12 @@ /* copy max significant digits to significand */ while( z=zEnd ) goto do_atof_calc; /* if decimal point is present */ @@ -28595,7 +30432,7 @@ s = s*10 + (*z - '0'); d--; } - z+=incr, nDigits++; + z+=incr; nDigits++; } } if( z>=zEnd ) goto do_atof_calc; @@ -28665,11 +30502,10 @@ if( e==0 ){ /*OPTIMIZATION-IF-TRUE*/ result = (double)s; }else{ - LONGDOUBLE_TYPE scale = 1.0; /* attempt to handle extremely small/large numbers better */ if( e>307 ){ /*OPTIMIZATION-IF-TRUE*/ if( e<342 ){ /*OPTIMIZATION-IF-TRUE*/ - while( e%308 ) { scale *= 1.0e+1; e -= 1; } + LONGDOUBLE_TYPE scale = sqlite3Pow10(e-308); if( esign<0 ){ result = s / scale; result /= 1.0e+308; @@ -28681,14 +30517,15 @@ if( esign<0 ){ result = 0.0*s; }else{ +#ifdef INFINITY + result = INFINITY*s; +#else result = 1e308*1e308*s; /* Infinity */ +#endif } } }else{ - /* 1.0e+22 is the largest power of 10 than can be - ** represented exactly. */ - while( e%22 ) { scale *= 1.0e+1; e -= 1; } - while( e>0 ) { scale *= 1.0e+22; e -= 22; } + LONGDOUBLE_TYPE scale = sqlite3Pow10(e); if( esign<0 ){ result = s / scale; }else{ @@ -28743,17 +30580,13 @@ ** Convert zNum to a 64-bit signed integer. zNum must be decimal. This ** routine does *not* accept hexadecimal notation. ** -** If the zNum value is representable as a 64-bit twos-complement -** integer, then write that value into *pNum and return 0. +** Returns: ** -** If zNum is exactly 9223372036854775808, return 2. This special -** case is broken out because while 9223372036854775808 cannot be a -** signed 64-bit integer, its negative -9223372036854775808 can be. +** 0 Successful transformation. Fits in a 64-bit signed integer. +** 1 Excess non-space text after the integer value +** 2 Integer too large for a 64-bit signed integer or is malformed +** 3 Special case of 9223372036854775808 ** -** If zNum is too big for a 64-bit integer and is not -** 9223372036854775808 or if zNum contains any non-numeric text, -** then return 1. -** ** length is the number of bytes in the string (bytes, not characters). ** The string is not necessarily zero-terminated. The encoding is ** given by enc. @@ -28765,6 +30598,7 @@ int i; int c = 0; int nonNum = 0; /* True if input contains UTF16 with high byte non-zero */ + int rc; /* Baseline return code */ const char *zStart; const char *zEnd = zNum + length; assert( enc==SQLITE_UTF8 || enc==SQLITE_UTF16LE || enc==SQLITE_UTF16BE ); @@ -28792,7 +30626,14 @@ for(i=0; &zNum[i]='0' && c<='9'; i+=incr){ u = u*10 + c - '0'; } + testcase( i==18*incr ); + testcase( i==19*incr ); + testcase( i==20*incr ); if( u>LARGEST_INT64 ){ + /* This test and assignment is needed only to suppress UB warnings + ** from clang and -fsanitize=undefined. This test and assignment make + ** the code a little larger and slower, and no harm comes from omitting + ** them, but we must appaise the undefined-behavior pharisees. */ *pNum = neg ? SMALLEST_INT64 : LARGEST_INT64; }else if( neg ){ *pNum = -(i64)u; @@ -28799,36 +30640,43 @@ }else{ *pNum = (i64)u; } - testcase( i==18 ); - testcase( i==19 ); - testcase( i==20 ); - if( &zNum[i]19*incr /* Too many digits */ + rc = 0; + if( (i==0 && zStart==zNum) /* No digits */ || nonNum /* UTF16 with high-order bytes non-zero */ ){ - /* zNum is empty or contains non-numeric text or is longer - ** than 19 digits (thus guaranteeing that it is too large) */ - return 1; - }else if( i<19*incr ){ + rc = 1; + }else if( &zNum[i]19*incr ? 1 : compare2pow63(zNum, incr); if( c<0 ){ /* zNum is less than 9223372036854775808 so it fits */ assert( u<=LARGEST_INT64 ); - return 0; - }else if( c>0 ){ - /* zNum is greater than 9223372036854775808 so it overflows */ - return 1; + return rc; }else{ - /* zNum is exactly 9223372036854775808. Fits if negative. The - ** special case 2 overflow if positive */ - assert( u-1==LARGEST_INT64 ); - return neg ? 0 : 2; + *pNum = neg ? SMALLEST_INT64 : LARGEST_INT64; + if( c>0 ){ + /* zNum is greater than 9223372036854775808 so it overflows */ + return 2; + }else{ + /* zNum is exactly 9223372036854775808. Fits if negative. The + ** special case 2 overflow if positive */ + assert( u-1==LARGEST_INT64 ); + return neg ? rc : 3; + } } } } @@ -28841,8 +30689,9 @@ ** Returns: ** ** 0 Successful transformation. Fits in a 64-bit signed integer. -** 1 Integer too large for a 64-bit signed integer or is malformed -** 2 Special case of 9223372036854775808 +** 1 Excess text after the integer value +** 2 Integer too large for a 64-bit signed integer or is malformed +** 3 Special case of 9223372036854775808 */ SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char *z, i64 *pOut){ #ifndef SQLITE_OMIT_HEX_INTEGER @@ -28856,7 +30705,7 @@ u = u*16 + sqlite3HexToInt(z[k]); } memcpy(pOut, &u, 8); - return (z[k]==0 && k-i<=16) ? 0 : 1; + return (z[k]==0 && k-i<=16) ? 0 : 2; }else #endif /* SQLITE_OMIT_HEX_INTEGER */ { @@ -29466,7 +31315,7 @@ ** overflow, leave *pA unchanged and return 1. */ SQLITE_PRIVATE int sqlite3AddInt64(i64 *pA, i64 iB){ -#if GCC_VERSION>=5004000 +#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER) return __builtin_add_overflow(*pA, iB, pA); #else i64 iA = *pA; @@ -29486,7 +31335,7 @@ #endif } SQLITE_PRIVATE int sqlite3SubInt64(i64 *pA, i64 iB){ -#if GCC_VERSION>=5004000 +#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER) return __builtin_sub_overflow(*pA, iB, pA); #else testcase( iB==SMALLEST_INT64+1 ); @@ -29501,7 +31350,7 @@ #endif } SQLITE_PRIVATE int sqlite3MulInt64(i64 *pA, i64 iB){ -#if GCC_VERSION>=5004000 +#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER) return __builtin_mul_overflow(*pA, iB, pA); #else i64 iA = *pA; @@ -29603,8 +31452,14 @@ if( x<2 ) return 0; while( x<8 ){ y -= 10; x <<= 1; } }else{ +#if GCC_VERSION>=5004000 + int i = 60 - __builtin_clzll(x); + y += i*10; + x >>= i; +#else while( x>255 ){ y += 40; x >>= 4; } /*OPTIMIZATION-IF-TRUE*/ while( x>15 ){ y += 10; x >>= 1; } +#endif } return a[x&7] + y - 10; } @@ -29824,6 +31679,20 @@ } return h; } +#ifdef SQLITE_ENABLE_NORMALIZE +static unsigned int strHashN(const char *z, int n){ + unsigned int h = 0; + int i; + for(i=0; iht ){ /*OPTIMIZATION-IF-TRUE*/ + struct _ht *pEntry; + h = strHashN(pKey, nKey) % pH->htsize; + pEntry = &pH->ht[h]; + elem = pEntry->chain; + count = pEntry->count; + }else{ + h = 0; + elem = pH->first; + count = pH->count; + } + if( pHash ) *pHash = h; + while( count-- ){ + assert( elem!=0 ); + if( sqlite3StrNICmp(elem->pKey,pKey,nKey)==0 ){ + return elem; + } + elem = elem->next; + } + return &nullElement; +} +#endif /* SQLITE_ENABLE_NORMALIZE */ + /* Remove a single entry from the hash table given a pointer to that ** element and a hash on the element's key. */ @@ -29979,6 +31882,14 @@ assert( pKey!=0 ); return findElementWithHash(pH, pKey, 0)->data; } +#ifdef SQLITE_ENABLE_NORMALIZE +SQLITE_PRIVATE void *sqlite3HashFindN(const Hash *pH, const char *pKey, int nKey){ + assert( pH!=0 ); + assert( pKey!=0 ); + assert( nKey>=0 ); + return findElementWithHashN(pH, pKey, nKey, 0)->data; +} +#endif /* SQLITE_ENABLE_NORMALIZE */ /* Insert an element into the hash table pH. The key is pKey ** and the data is "data". @@ -30046,170 +31957,176 @@ /* 1 */ "AutoCommit" OpHelp(""), /* 2 */ "Transaction" OpHelp(""), /* 3 */ "SorterNext" OpHelp(""), - /* 4 */ "PrevIfOpen" OpHelp(""), - /* 5 */ "NextIfOpen" OpHelp(""), - /* 6 */ "Prev" OpHelp(""), - /* 7 */ "Next" OpHelp(""), - /* 8 */ "Checkpoint" OpHelp(""), - /* 9 */ "JournalMode" OpHelp(""), - /* 10 */ "Vacuum" OpHelp(""), - /* 11 */ "VFilter" OpHelp("iplan=r[P3] zplan='P4'"), - /* 12 */ "VUpdate" OpHelp("data=r[P3@P2]"), - /* 13 */ "Goto" OpHelp(""), - /* 14 */ "Gosub" OpHelp(""), - /* 15 */ "InitCoroutine" OpHelp(""), - /* 16 */ "Yield" OpHelp(""), - /* 17 */ "MustBeInt" OpHelp(""), - /* 18 */ "Jump" OpHelp(""), + /* 4 */ "Prev" OpHelp(""), + /* 5 */ "Next" OpHelp(""), + /* 6 */ "Checkpoint" OpHelp(""), + /* 7 */ "JournalMode" OpHelp(""), + /* 8 */ "Vacuum" OpHelp(""), + /* 9 */ "VFilter" OpHelp("iplan=r[P3] zplan='P4'"), + /* 10 */ "VUpdate" OpHelp("data=r[P3@P2]"), + /* 11 */ "Goto" OpHelp(""), + /* 12 */ "Gosub" OpHelp(""), + /* 13 */ "InitCoroutine" OpHelp(""), + /* 14 */ "Yield" OpHelp(""), + /* 15 */ "MustBeInt" OpHelp(""), + /* 16 */ "Jump" OpHelp(""), + /* 17 */ "Once" OpHelp(""), + /* 18 */ "If" OpHelp(""), /* 19 */ "Not" OpHelp("r[P2]= !r[P1]"), - /* 20 */ "Once" OpHelp(""), - /* 21 */ "If" OpHelp(""), - /* 22 */ "IfNot" OpHelp(""), - /* 23 */ "IfNullRow" OpHelp("if P1.nullRow then r[P3]=NULL, goto P2"), - /* 24 */ "SeekLT" OpHelp("key=r[P3@P4]"), - /* 25 */ "SeekLE" OpHelp("key=r[P3@P4]"), - /* 26 */ "SeekGE" OpHelp("key=r[P3@P4]"), - /* 27 */ "SeekGT" OpHelp("key=r[P3@P4]"), - /* 28 */ "NoConflict" OpHelp("key=r[P3@P4]"), - /* 29 */ "NotFound" OpHelp("key=r[P3@P4]"), - /* 30 */ "Found" OpHelp("key=r[P3@P4]"), - /* 31 */ "SeekRowid" OpHelp("intkey=r[P3]"), - /* 32 */ "NotExists" OpHelp("intkey=r[P3]"), - /* 33 */ "Last" OpHelp(""), - /* 34 */ "IfSmaller" OpHelp(""), - /* 35 */ "SorterSort" OpHelp(""), - /* 36 */ "Sort" OpHelp(""), - /* 37 */ "Rewind" OpHelp(""), - /* 38 */ "IdxLE" OpHelp("key=r[P3@P4]"), - /* 39 */ "IdxGT" OpHelp("key=r[P3@P4]"), - /* 40 */ "IdxLT" OpHelp("key=r[P3@P4]"), - /* 41 */ "IdxGE" OpHelp("key=r[P3@P4]"), - /* 42 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"), - /* 43 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"), - /* 44 */ "Program" OpHelp(""), - /* 45 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"), - /* 46 */ "IfPos" OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"), - /* 47 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]--, goto P2"), - /* 48 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"), - /* 49 */ "IncrVacuum" OpHelp(""), - /* 50 */ "VNext" OpHelp(""), - /* 51 */ "Init" OpHelp("Start at P2"), - /* 52 */ "Return" OpHelp(""), - /* 53 */ "EndCoroutine" OpHelp(""), - /* 54 */ "HaltIfNull" OpHelp("if r[P3]=null halt"), - /* 55 */ "Halt" OpHelp(""), - /* 56 */ "Integer" OpHelp("r[P2]=P1"), - /* 57 */ "Int64" OpHelp("r[P2]=P4"), - /* 58 */ "String" OpHelp("r[P2]='P4' (len=P1)"), - /* 59 */ "Null" OpHelp("r[P2..P3]=NULL"), - /* 60 */ "SoftNull" OpHelp("r[P1]=NULL"), - /* 61 */ "Blob" OpHelp("r[P2]=P4 (len=P1)"), - /* 62 */ "Variable" OpHelp("r[P2]=parameter(P1,P4)"), - /* 63 */ "Move" OpHelp("r[P2@P3]=r[P1@P3]"), - /* 64 */ "Copy" OpHelp("r[P2@P3+1]=r[P1@P3+1]"), - /* 65 */ "SCopy" OpHelp("r[P2]=r[P1]"), - /* 66 */ "IntCopy" OpHelp("r[P2]=r[P1]"), - /* 67 */ "ResultRow" OpHelp("output=r[P1@P2]"), - /* 68 */ "CollSeq" OpHelp(""), - /* 69 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"), - /* 70 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"), - /* 71 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"), - /* 72 */ "RealAffinity" OpHelp(""), - /* 73 */ "Cast" OpHelp("affinity(r[P1])"), - /* 74 */ "Permutation" OpHelp(""), - /* 75 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"), - /* 76 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"), - /* 77 */ "Ne" OpHelp("IF r[P3]!=r[P1]"), - /* 78 */ "Eq" OpHelp("IF r[P3]==r[P1]"), - /* 79 */ "Gt" OpHelp("IF r[P3]>r[P1]"), - /* 80 */ "Le" OpHelp("IF r[P3]<=r[P1]"), - /* 81 */ "Lt" OpHelp("IF r[P3]=r[P1]"), - /* 83 */ "ElseNotEq" OpHelp(""), - /* 84 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"), - /* 85 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"), - /* 86 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<>r[P1]"), - /* 88 */ "Add" OpHelp("r[P3]=r[P1]+r[P2]"), - /* 89 */ "Subtract" OpHelp("r[P3]=r[P2]-r[P1]"), - /* 90 */ "Multiply" OpHelp("r[P3]=r[P1]*r[P2]"), - /* 91 */ "Divide" OpHelp("r[P3]=r[P2]/r[P1]"), - /* 92 */ "Remainder" OpHelp("r[P3]=r[P2]%r[P1]"), - /* 93 */ "Concat" OpHelp("r[P3]=r[P2]+r[P1]"), - /* 94 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"), - /* 95 */ "BitNot" OpHelp("r[P1]= ~r[P1]"), - /* 96 */ "Column" OpHelp("r[P3]=PX"), - /* 97 */ "String8" OpHelp("r[P2]='P4'"), - /* 98 */ "Affinity" OpHelp("affinity(r[P1@P2])"), - /* 99 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"), - /* 100 */ "Count" OpHelp("r[P2]=count()"), - /* 101 */ "ReadCookie" OpHelp(""), - /* 102 */ "SetCookie" OpHelp(""), - /* 103 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"), - /* 104 */ "OpenRead" OpHelp("root=P2 iDb=P3"), - /* 105 */ "OpenWrite" OpHelp("root=P2 iDb=P3"), - /* 106 */ "OpenDup" OpHelp(""), - /* 107 */ "OpenAutoindex" OpHelp("nColumn=P2"), - /* 108 */ "OpenEphemeral" OpHelp("nColumn=P2"), - /* 109 */ "SorterOpen" OpHelp(""), - /* 110 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"), - /* 111 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"), - /* 112 */ "Close" OpHelp(""), - /* 113 */ "ColumnsUsed" OpHelp(""), - /* 114 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"), - /* 115 */ "NewRowid" OpHelp("r[P2]=rowid"), - /* 116 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"), - /* 117 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"), - /* 118 */ "Delete" OpHelp(""), - /* 119 */ "ResetCount" OpHelp(""), - /* 120 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"), - /* 121 */ "SorterData" OpHelp("r[P2]=data"), - /* 122 */ "RowData" OpHelp("r[P2]=data"), - /* 123 */ "Rowid" OpHelp("r[P2]=rowid"), - /* 124 */ "NullRow" OpHelp(""), - /* 125 */ "SorterInsert" OpHelp("key=r[P2]"), - /* 126 */ "IdxInsert" OpHelp("key=r[P2]"), - /* 127 */ "IdxDelete" OpHelp("key=r[P2@P3]"), - /* 128 */ "DeferredSeek" OpHelp("Move P3 to P1.rowid if needed"), - /* 129 */ "IdxRowid" OpHelp("r[P2]=rowid"), - /* 130 */ "Destroy" OpHelp(""), - /* 131 */ "Clear" OpHelp(""), - /* 132 */ "Real" OpHelp("r[P2]=P4"), - /* 133 */ "ResetSorter" OpHelp(""), - /* 134 */ "CreateIndex" OpHelp("r[P2]=root iDb=P1"), - /* 135 */ "CreateTable" OpHelp("r[P2]=root iDb=P1"), - /* 136 */ "SqlExec" OpHelp(""), - /* 137 */ "ParseSchema" OpHelp(""), - /* 138 */ "LoadAnalysis" OpHelp(""), - /* 139 */ "DropTable" OpHelp(""), - /* 140 */ "DropIndex" OpHelp(""), - /* 141 */ "DropTrigger" OpHelp(""), - /* 142 */ "IntegrityCk" OpHelp(""), - /* 143 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"), - /* 144 */ "Param" OpHelp(""), - /* 145 */ "FkCounter" OpHelp("fkctr[P1]+=P2"), - /* 146 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"), - /* 147 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"), - /* 148 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"), - /* 149 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"), - /* 150 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), - /* 151 */ "Expire" OpHelp(""), - /* 152 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), - /* 153 */ "VBegin" OpHelp(""), - /* 154 */ "VCreate" OpHelp(""), - /* 155 */ "VDestroy" OpHelp(""), - /* 156 */ "VOpen" OpHelp(""), - /* 157 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), - /* 158 */ "VRename" OpHelp(""), - /* 159 */ "Pagecount" OpHelp(""), - /* 160 */ "MaxPgcnt" OpHelp(""), - /* 161 */ "PureFunc0" OpHelp(""), - /* 162 */ "Function0" OpHelp("r[P3]=func(r[P2@P5])"), - /* 163 */ "PureFunc" OpHelp(""), - /* 164 */ "Function" OpHelp("r[P3]=func(r[P2@P5])"), - /* 165 */ "CursorHint" OpHelp(""), - /* 166 */ "Noop" OpHelp(""), - /* 167 */ "Explain" OpHelp(""), + /* 20 */ "IfNot" OpHelp(""), + /* 21 */ "IfNullRow" OpHelp("if P1.nullRow then r[P3]=NULL, goto P2"), + /* 22 */ "SeekLT" OpHelp("key=r[P3@P4]"), + /* 23 */ "SeekLE" OpHelp("key=r[P3@P4]"), + /* 24 */ "SeekGE" OpHelp("key=r[P3@P4]"), + /* 25 */ "SeekGT" OpHelp("key=r[P3@P4]"), + /* 26 */ "IfNoHope" OpHelp("key=r[P3@P4]"), + /* 27 */ "NoConflict" OpHelp("key=r[P3@P4]"), + /* 28 */ "NotFound" OpHelp("key=r[P3@P4]"), + /* 29 */ "Found" OpHelp("key=r[P3@P4]"), + /* 30 */ "SeekRowid" OpHelp("intkey=r[P3]"), + /* 31 */ "NotExists" OpHelp("intkey=r[P3]"), + /* 32 */ "Last" OpHelp(""), + /* 33 */ "IfSmaller" OpHelp(""), + /* 34 */ "SorterSort" OpHelp(""), + /* 35 */ "Sort" OpHelp(""), + /* 36 */ "Rewind" OpHelp(""), + /* 37 */ "IdxLE" OpHelp("key=r[P3@P4]"), + /* 38 */ "IdxGT" OpHelp("key=r[P3@P4]"), + /* 39 */ "IdxLT" OpHelp("key=r[P3@P4]"), + /* 40 */ "IdxGE" OpHelp("key=r[P3@P4]"), + /* 41 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"), + /* 42 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"), + /* 43 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"), + /* 44 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"), + /* 45 */ "Program" OpHelp(""), + /* 46 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"), + /* 47 */ "IfPos" OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"), + /* 48 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]--, goto P2"), + /* 49 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"), + /* 50 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"), + /* 51 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"), + /* 52 */ "Ne" OpHelp("IF r[P3]!=r[P1]"), + /* 53 */ "Eq" OpHelp("IF r[P3]==r[P1]"), + /* 54 */ "Gt" OpHelp("IF r[P3]>r[P1]"), + /* 55 */ "Le" OpHelp("IF r[P3]<=r[P1]"), + /* 56 */ "Lt" OpHelp("IF r[P3]=r[P1]"), + /* 58 */ "ElseNotEq" OpHelp(""), + /* 59 */ "IncrVacuum" OpHelp(""), + /* 60 */ "VNext" OpHelp(""), + /* 61 */ "Init" OpHelp("Start at P2"), + /* 62 */ "PureFunc0" OpHelp(""), + /* 63 */ "Function0" OpHelp("r[P3]=func(r[P2@P5])"), + /* 64 */ "PureFunc" OpHelp(""), + /* 65 */ "Function" OpHelp("r[P3]=func(r[P2@P5])"), + /* 66 */ "Return" OpHelp(""), + /* 67 */ "EndCoroutine" OpHelp(""), + /* 68 */ "HaltIfNull" OpHelp("if r[P3]=null halt"), + /* 69 */ "Halt" OpHelp(""), + /* 70 */ "Integer" OpHelp("r[P2]=P1"), + /* 71 */ "Int64" OpHelp("r[P2]=P4"), + /* 72 */ "String" OpHelp("r[P2]='P4' (len=P1)"), + /* 73 */ "Null" OpHelp("r[P2..P3]=NULL"), + /* 74 */ "SoftNull" OpHelp("r[P1]=NULL"), + /* 75 */ "Blob" OpHelp("r[P2]=P4 (len=P1)"), + /* 76 */ "Variable" OpHelp("r[P2]=parameter(P1,P4)"), + /* 77 */ "Move" OpHelp("r[P2@P3]=r[P1@P3]"), + /* 78 */ "Copy" OpHelp("r[P2@P3+1]=r[P1@P3+1]"), + /* 79 */ "SCopy" OpHelp("r[P2]=r[P1]"), + /* 80 */ "IntCopy" OpHelp("r[P2]=r[P1]"), + /* 81 */ "ResultRow" OpHelp("output=r[P1@P2]"), + /* 82 */ "CollSeq" OpHelp(""), + /* 83 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"), + /* 84 */ "RealAffinity" OpHelp(""), + /* 85 */ "Cast" OpHelp("affinity(r[P1])"), + /* 86 */ "Permutation" OpHelp(""), + /* 87 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"), + /* 88 */ "IsTrue" OpHelp("r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4"), + /* 89 */ "Offset" OpHelp("r[P3] = sqlite_offset(P1)"), + /* 90 */ "Column" OpHelp("r[P3]=PX"), + /* 91 */ "Affinity" OpHelp("affinity(r[P1@P2])"), + /* 92 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"), + /* 93 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"), + /* 94 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<>r[P1]"), + /* 96 */ "Add" OpHelp("r[P3]=r[P1]+r[P2]"), + /* 97 */ "Subtract" OpHelp("r[P3]=r[P2]-r[P1]"), + /* 98 */ "Multiply" OpHelp("r[P3]=r[P1]*r[P2]"), + /* 99 */ "Divide" OpHelp("r[P3]=r[P2]/r[P1]"), + /* 100 */ "Remainder" OpHelp("r[P3]=r[P2]%r[P1]"), + /* 101 */ "Concat" OpHelp("r[P3]=r[P2]+r[P1]"), + /* 102 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"), + /* 103 */ "BitNot" OpHelp("r[P2]= ~r[P1]"), + /* 104 */ "Count" OpHelp("r[P2]=count()"), + /* 105 */ "ReadCookie" OpHelp(""), + /* 106 */ "String8" OpHelp("r[P2]='P4'"), + /* 107 */ "SetCookie" OpHelp(""), + /* 108 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"), + /* 109 */ "OpenRead" OpHelp("root=P2 iDb=P3"), + /* 110 */ "OpenWrite" OpHelp("root=P2 iDb=P3"), + /* 111 */ "OpenDup" OpHelp(""), + /* 112 */ "OpenAutoindex" OpHelp("nColumn=P2"), + /* 113 */ "OpenEphemeral" OpHelp("nColumn=P2"), + /* 114 */ "SorterOpen" OpHelp(""), + /* 115 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"), + /* 116 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"), + /* 117 */ "Close" OpHelp(""), + /* 118 */ "ColumnsUsed" OpHelp(""), + /* 119 */ "SeekHit" OpHelp("seekHit=P2"), + /* 120 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"), + /* 121 */ "NewRowid" OpHelp("r[P2]=rowid"), + /* 122 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"), + /* 123 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"), + /* 124 */ "Delete" OpHelp(""), + /* 125 */ "ResetCount" OpHelp(""), + /* 126 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"), + /* 127 */ "SorterData" OpHelp("r[P2]=data"), + /* 128 */ "RowData" OpHelp("r[P2]=data"), + /* 129 */ "Rowid" OpHelp("r[P2]=rowid"), + /* 130 */ "NullRow" OpHelp(""), + /* 131 */ "SeekEnd" OpHelp(""), + /* 132 */ "SorterInsert" OpHelp("key=r[P2]"), + /* 133 */ "IdxInsert" OpHelp("key=r[P2]"), + /* 134 */ "IdxDelete" OpHelp("key=r[P2@P3]"), + /* 135 */ "DeferredSeek" OpHelp("Move P3 to P1.rowid if needed"), + /* 136 */ "IdxRowid" OpHelp("r[P2]=rowid"), + /* 137 */ "Destroy" OpHelp(""), + /* 138 */ "Clear" OpHelp(""), + /* 139 */ "ResetSorter" OpHelp(""), + /* 140 */ "CreateBtree" OpHelp("r[P2]=root iDb=P1 flags=P3"), + /* 141 */ "Real" OpHelp("r[P2]=P4"), + /* 142 */ "SqlExec" OpHelp(""), + /* 143 */ "ParseSchema" OpHelp(""), + /* 144 */ "LoadAnalysis" OpHelp(""), + /* 145 */ "DropTable" OpHelp(""), + /* 146 */ "DropIndex" OpHelp(""), + /* 147 */ "DropTrigger" OpHelp(""), + /* 148 */ "IntegrityCk" OpHelp(""), + /* 149 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"), + /* 150 */ "Param" OpHelp(""), + /* 151 */ "FkCounter" OpHelp("fkctr[P1]+=P2"), + /* 152 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"), + /* 153 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"), + /* 154 */ "AggInverse" OpHelp("accum=r[P3] inverse(r[P2@P5])"), + /* 155 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"), + /* 156 */ "AggStep1" OpHelp("accum=r[P3] step(r[P2@P5])"), + /* 157 */ "AggValue" OpHelp("r[P3]=value N=P2"), + /* 158 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), + /* 159 */ "Expire" OpHelp(""), + /* 160 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), + /* 161 */ "VBegin" OpHelp(""), + /* 162 */ "VCreate" OpHelp(""), + /* 163 */ "VDestroy" OpHelp(""), + /* 164 */ "VOpen" OpHelp(""), + /* 165 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), + /* 166 */ "VRename" OpHelp(""), + /* 167 */ "Pagecount" OpHelp(""), + /* 168 */ "MaxPgcnt" OpHelp(""), + /* 169 */ "Trace" OpHelp(""), + /* 170 */ "CursorHint" OpHelp(""), + /* 171 */ "Noop" OpHelp(""), + /* 172 */ "Explain" OpHelp(""), + /* 173 */ "Abortable" OpHelp(""), }; return azName[i]; } @@ -30309,6 +32226,7 @@ #include #include #include +#include #include /* #include */ #include @@ -30318,7 +32236,7 @@ #endif #if SQLITE_ENABLE_LOCKING_STYLE -# include +/* # include */ # include # include #endif /* SQLITE_ENABLE_LOCKING_STYLE */ @@ -30354,12 +32272,10 @@ #define SQLITE_FSFLAGS_IS_MSDOS 0x1 /* -** If we are to be thread-safe, include the pthreads header and define -** the SQLITE_UNIX_THREADS macro. +** If we are to be thread-safe, include the pthreads header. */ #if SQLITE_THREADSAFE /* # include */ -# define SQLITE_UNIX_THREADS 1 #endif /* @@ -30428,7 +32344,7 @@ unsigned short int ctrlFlags; /* Behavioral bits. UNIXFILE_* flags */ int lastErrno; /* The unix errno from last I/O error */ void *lockingContext; /* Locking style specific state */ - UnixUnusedFd *pUnused; /* Pre-allocated UnixUnusedFd */ + UnixUnusedFd *pPreallocatedUnused; /* Pre-allocated UnixUnusedFd */ const char *zPath; /* Name of the file */ unixShm *pShm; /* Shared memory segment information */ int szChunk; /* Configured by FCNTL_CHUNK_SIZE */ @@ -30439,10 +32355,8 @@ sqlite3_int64 mmapSizeMax; /* Configured FCNTL_MMAP_SIZE value */ void *pMapRegion; /* Memory mapped region */ #endif -#ifdef __QNXNTO__ int sectorSize; /* Device sector size */ int deviceCharacteristics; /* Precomputed device characteristics */ -#endif #if SQLITE_ENABLE_LOCKING_STYLE int openFlags; /* The flags specified at open() */ #endif @@ -30449,6 +32363,9 @@ #if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__) unsigned fsFlags; /* cached details from statfs() */ #endif +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT + unsigned iBusyTimeout; /* Wait this many millisec on locks */ +#endif #if OS_VXWORKS struct vxworksFileId *pId; /* Unique file ID */ #endif @@ -30745,7 +32662,21 @@ # define lseek lseek64 #endif +#ifdef __linux__ /* +** Linux-specific IOCTL magic numbers used for controlling F2FS +*/ +#define F2FS_IOCTL_MAGIC 0xf5 +#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1) +#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2) +#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3) +#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5) +#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, u32) +#define F2FS_FEATURE_ATOMIC_WRITE 0x0004 +#endif /* __linux__ */ + + +/* ** Different Unix systems declare open() in different ways. Same use ** open(const char*,int,mode_t). Others use open(const char*,int,...). ** The difference is important when using a pointer to the function. @@ -30872,7 +32803,11 @@ #endif #define osFchown ((int(*)(int,uid_t,gid_t))aSyscall[20].pCurrent) +#if defined(HAVE_FCHOWN) { "geteuid", (sqlite3_syscall_ptr)geteuid, 0 }, +#else + { "geteuid", (sqlite3_syscall_ptr)0, 0 }, +#endif #define osGeteuid ((uid_t(*)(void))aSyscall[21].pCurrent) #if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 @@ -30887,7 +32822,7 @@ #else { "munmap", (sqlite3_syscall_ptr)0, 0 }, #endif -#define osMunmap ((void*(*)(void*,size_t))aSyscall[23].pCurrent) +#define osMunmap ((int(*)(void*,size_t))aSyscall[23].pCurrent) #if HAVE_MREMAP && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) { "mremap", (sqlite3_syscall_ptr)mremap, 0 }, @@ -30917,6 +32852,17 @@ #endif #define osLstat ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent) +#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) +# ifdef __ANDROID__ + { "ioctl", (sqlite3_syscall_ptr)(int(*)(int, int, ...))ioctl, 0 }, +# else + { "ioctl", (sqlite3_syscall_ptr)ioctl, 0 }, +# endif +#else + { "ioctl", (sqlite3_syscall_ptr)0, 0 }, +#endif +#define osIoctl ((int(*)(int,int,...))aSyscall[28].pCurrent) + }; /* End of the overrideable system calls */ @@ -31092,16 +33038,30 @@ ** unixEnterMutex() ** assert( unixMutexHeld() ); ** unixEnterLeave() +** +** To prevent deadlock, the global unixBigLock must must be acquired +** before the unixInodeInfo.pLockMutex mutex, if both are held. It is +** OK to get the pLockMutex without holding unixBigLock first, but if +** that happens, the unixBigLock mutex must not be acquired until after +** pLockMutex is released. +** +** OK: enter(unixBigLock), enter(pLockInfo) +** OK: enter(unixBigLock) +** OK: enter(pLockInfo) +** ERROR: enter(pLockInfo), enter(unixBigLock) */ +static sqlite3_mutex *unixBigLock = 0; static void unixEnterMutex(void){ - sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + assert( sqlite3_mutex_notheld(unixBigLock) ); /* Not a recursive mutex */ + sqlite3_mutex_enter(unixBigLock); } static void unixLeaveMutex(void){ - sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + assert( sqlite3_mutex_held(unixBigLock) ); + sqlite3_mutex_leave(unixBigLock); } #ifdef SQLITE_DEBUG static int unixMutexHeld(void) { - return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + return sqlite3_mutex_held(unixBigLock); } #endif @@ -31491,22 +33451,39 @@ /* ** An instance of the following structure is allocated for each open -** inode. Or, on LinuxThreads, there is one of these structures for -** each inode opened by each thread. +** inode. ** ** A single inode can have multiple file descriptors, so each unixFile ** structure contains a pointer to an instance of this object and this ** object keeps a count of the number of unixFile pointing to it. +** +** Mutex rules: +** +** (1) Only the pLockMutex mutex must be held in order to read or write +** any of the locking fields: +** nShared, nLock, eFileLock, bProcessLock, pUnused +** +** (2) When nRef>0, then the following fields are unchanging and can +** be read (but not written) without holding any mutex: +** fileId, pLockMutex +** +** (3) With the exceptions above, all the fields may only be read +** or written while holding the global unixBigLock mutex. +** +** Deadlock prevention: The global unixBigLock mutex may not +** be acquired while holding the pLockMutex mutex. If both unixBigLock +** and pLockMutex are needed, then unixBigLock must be acquired first. */ struct unixInodeInfo { struct unixFileId fileId; /* The lookup key */ - int nShared; /* Number of SHARED locks held */ - unsigned char eFileLock; /* One of SHARED_LOCK, RESERVED_LOCK etc. */ - unsigned char bProcessLock; /* An exclusive process lock is held */ + sqlite3_mutex *pLockMutex; /* Hold this mutex for... */ + int nShared; /* Number of SHARED locks held */ + int nLock; /* Number of outstanding file locks */ + unsigned char eFileLock; /* One of SHARED_LOCK, RESERVED_LOCK etc. */ + unsigned char bProcessLock; /* An exclusive process lock is held */ + UnixUnusedFd *pUnused; /* Unused file descriptors to close */ int nRef; /* Number of pointers to this structure */ unixShmNode *pShmNode; /* Shared memory associated with this inode */ - int nLock; /* Number of outstanding file locks */ - UnixUnusedFd *pUnused; /* Unused file descriptors to close */ unixInodeInfo *pNext; /* List of all unixInodeInfo objects */ unixInodeInfo *pPrev; /* .... doubly linked */ #if SQLITE_ENABLE_LOCKING_STYLE @@ -31520,10 +33497,28 @@ /* ** A lists of all unixInodeInfo objects. +** +** Must hold unixBigLock in order to read or write this variable. */ -static unixInodeInfo *inodeList = 0; +static unixInodeInfo *inodeList = 0; /* All unixInodeInfo objects */ +#ifdef SQLITE_DEBUG /* +** True if the inode mutex (on the unixFile.pFileMutex field) is held, or not. +** This routine is used only within assert() to help verify correct mutex +** usage. +*/ +int unixFileMutexHeld(unixFile *pFile){ + assert( pFile->pInode ); + return sqlite3_mutex_held(pFile->pInode->pLockMutex); +} +int unixFileMutexNotheld(unixFile *pFile){ + assert( pFile->pInode ); + return sqlite3_mutex_notheld(pFile->pInode->pLockMutex); +} +#endif + +/* ** ** This function - unixLogErrorAtLine(), is only ever called via the macro ** unixLogError(). @@ -31627,6 +33622,7 @@ unixInodeInfo *pInode = pFile->pInode; UnixUnusedFd *p; UnixUnusedFd *pNext; + assert( unixFileMutexHeld(pFile) ); for(p=pInode->pUnused; p; p=pNext){ pNext = p->pNext; robust_close(pFile, p->fd, __LINE__); @@ -31638,17 +33634,20 @@ /* ** Release a unixInodeInfo structure previously allocated by findInodeInfo(). ** -** The mutex entered using the unixEnterMutex() function must be held -** when this function is called. +** The global mutex must be held when this routine is called, but the mutex +** on the inode being deleted must NOT be held. */ static void releaseInodeInfo(unixFile *pFile){ unixInodeInfo *pInode = pFile->pInode; assert( unixMutexHeld() ); + assert( unixFileMutexNotheld(pFile) ); if( ALWAYS(pInode) ){ pInode->nRef--; if( pInode->nRef==0 ){ assert( pInode->pShmNode==0 ); + sqlite3_mutex_enter(pInode->pLockMutex); closePendingFds(pFile); + sqlite3_mutex_leave(pInode->pLockMutex); if( pInode->pPrev ){ assert( pInode->pPrev->pNext==pInode ); pInode->pPrev->pNext = pInode->pNext; @@ -31660,6 +33659,7 @@ assert( pInode->pNext->pPrev==pInode ); pInode->pNext->pPrev = pInode->pPrev; } + sqlite3_mutex_free(pInode->pLockMutex); sqlite3_free(pInode); } } @@ -31670,8 +33670,7 @@ ** describes that file descriptor. Create a new one if necessary. The ** return value might be uninitialized if an error occurs. ** -** The mutex entered using the unixEnterMutex() function must be held -** when this function is called. +** The global mutex must held when calling this routine. ** ** Return an appropriate error code. */ @@ -31732,6 +33731,7 @@ #else fileId.ino = (u64)statbuf.st_ino; #endif + assert( unixMutexHeld() ); pInode = inodeList; while( pInode && memcmp(&fileId, &pInode->fileId, sizeof(fileId)) ){ pInode = pInode->pNext; @@ -31743,7 +33743,15 @@ } memset(pInode, 0, sizeof(*pInode)); memcpy(&pInode->fileId, &fileId, sizeof(fileId)); + if( sqlite3GlobalConfig.bCoreMutex ){ + pInode->pLockMutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST); + if( pInode->pLockMutex==0 ){ + sqlite3_free(pInode); + return SQLITE_NOMEM_BKPT; + } + } pInode->nRef = 1; + assert( unixMutexHeld() ); pInode->pNext = inodeList; pInode->pPrev = 0; if( inodeList ) inodeList->pPrev = pInode; @@ -31821,7 +33829,7 @@ assert( pFile ); assert( pFile->eFileLock<=SHARED_LOCK ); - unixEnterMutex(); /* Because pFile->pInode is shared across threads */ + sqlite3_mutex_enter(pFile->pInode->pLockMutex); /* Check if a thread in this process holds such a lock */ if( pFile->pInode->eFileLock>SHARED_LOCK ){ @@ -31846,7 +33854,7 @@ } #endif - unixLeaveMutex(); + sqlite3_mutex_leave(pFile->pInode->pLockMutex); OSTRACE(("TEST WR-LOCK %d %d %d (unix)\n", pFile->h, rc, reserved)); *pResOut = reserved; @@ -31854,6 +33862,43 @@ } /* +** Set a posix-advisory-lock. +** +** There are two versions of this routine. If compiled with +** SQLITE_ENABLE_SETLK_TIMEOUT then the routine has an extra parameter +** which is a pointer to a unixFile. If the unixFile->iBusyTimeout +** value is set, then it is the number of milliseconds to wait before +** failing the lock. The iBusyTimeout value is always reset back to +** zero on each call. +** +** If SQLITE_ENABLE_SETLK_TIMEOUT is not defined, then do a non-blocking +** attempt to set the lock. +*/ +#ifndef SQLITE_ENABLE_SETLK_TIMEOUT +# define osSetPosixAdvisoryLock(h,x,t) osFcntl(h,F_SETLK,x) +#else +static int osSetPosixAdvisoryLock( + int h, /* The file descriptor on which to take the lock */ + struct flock *pLock, /* The description of the lock */ + unixFile *pFile /* Structure holding timeout value */ +){ + int rc = osFcntl(h,F_SETLK,pLock); + while( rc<0 && pFile->iBusyTimeout>0 ){ + /* On systems that support some kind of blocking file lock with a timeout, + ** make appropriate changes here to invoke that blocking file lock. On + ** generic posix, however, there is no such API. So we simply try the + ** lock once every millisecond until either the timeout expires, or until + ** the lock is obtained. */ + usleep(1000); + rc = osFcntl(h,F_SETLK,pLock); + pFile->iBusyTimeout--; + } + return rc; +} +#endif /* SQLITE_ENABLE_SETLK_TIMEOUT */ + + +/* ** Attempt to set a system-lock on the file pFile. The lock is ** described by pLock. ** @@ -31875,8 +33920,8 @@ static int unixFileLock(unixFile *pFile, struct flock *pLock){ int rc; unixInodeInfo *pInode = pFile->pInode; - assert( unixMutexHeld() ); assert( pInode!=0 ); + assert( sqlite3_mutex_held(pInode->pLockMutex) ); if( (pFile->ctrlFlags & (UNIXFILE_EXCL|UNIXFILE_RDONLY))==UNIXFILE_EXCL ){ if( pInode->bProcessLock==0 ){ struct flock lock; @@ -31885,7 +33930,7 @@ lock.l_start = SHARED_FIRST; lock.l_len = SHARED_SIZE; lock.l_type = F_WRLCK; - rc = osFcntl(pFile->h, F_SETLK, &lock); + rc = osSetPosixAdvisoryLock(pFile->h, &lock, pFile); if( rc<0 ) return rc; pInode->bProcessLock = 1; pInode->nLock++; @@ -31893,7 +33938,7 @@ rc = 0; } }else{ - rc = osFcntl(pFile->h, F_SETLK, pLock); + rc = osSetPosixAdvisoryLock(pFile->h, pLock, pFile); } return rc; } @@ -31995,8 +34040,8 @@ /* This mutex is needed because pFile->pInode is shared across threads */ - unixEnterMutex(); pInode = pFile->pInode; + sqlite3_mutex_enter(pInode->pLockMutex); /* If some thread using this PID has a lock via a different unixFile* ** handle that precludes the requested lock, return BUSY. @@ -32139,7 +34184,7 @@ } end_lock: - unixLeaveMutex(); + sqlite3_mutex_leave(pInode->pLockMutex); OSTRACE(("LOCK %d %s %s (unix)\n", pFile->h, azFileLock(eFileLock), rc==SQLITE_OK ? "ok" : "failed")); return rc; @@ -32151,11 +34196,12 @@ */ static void setPendingFd(unixFile *pFile){ unixInodeInfo *pInode = pFile->pInode; - UnixUnusedFd *p = pFile->pUnused; + UnixUnusedFd *p = pFile->pPreallocatedUnused; + assert( unixFileMutexHeld(pFile) ); p->pNext = pInode->pUnused; pInode->pUnused = p; pFile->h = -1; - pFile->pUnused = 0; + pFile->pPreallocatedUnused = 0; } /* @@ -32186,8 +34232,8 @@ if( pFile->eFileLock<=eFileLock ){ return SQLITE_OK; } - unixEnterMutex(); pInode = pFile->pInode; + sqlite3_mutex_enter(pInode->pLockMutex); assert( pInode->nShared!=0 ); if( pFile->eFileLock>SHARED_LOCK ){ assert( pInode->eFileLock==pFile->eFileLock ); @@ -32313,14 +34359,14 @@ */ pInode->nLock--; assert( pInode->nLock>=0 ); - if( pInode->nLock==0 ){ - closePendingFds(pFile); - } + if( pInode->nLock==0 ) closePendingFds(pFile); } end_unlock: - unixLeaveMutex(); - if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock; + sqlite3_mutex_leave(pInode->pLockMutex); + if( rc==SQLITE_OK ){ + pFile->eFileLock = eFileLock; + } return rc; } @@ -32380,7 +34426,7 @@ #endif OSTRACE(("CLOSE %-3d\n", pFile->h)); OpenCounter(-1); - sqlite3_free(pFile->pUnused); + sqlite3_free(pFile->pPreallocatedUnused); memset(pFile, 0, sizeof(unixFile)); return SQLITE_OK; } @@ -32391,8 +34437,12 @@ static int unixClose(sqlite3_file *id){ int rc = SQLITE_OK; unixFile *pFile = (unixFile *)id; + unixInodeInfo *pInode = pFile->pInode; + + assert( pInode!=0 ); verifyDbFile(pFile); unixUnlock(id, NO_LOCK); + assert( unixFileMutexNotheld(pFile) ); unixEnterMutex(); /* unixFile.pInode is always valid here. Otherwise, a different close @@ -32399,7 +34449,8 @@ ** routine (e.g. nolockClose()) would be called instead. */ assert( pFile->pInode->nLock>0 || pFile->pInode->bProcessLock==0 ); - if( ALWAYS(pFile->pInode) && pFile->pInode->nLock ){ + sqlite3_mutex_enter(pInode->pLockMutex); + if( pInode->nLock ){ /* If there are outstanding locks, do not actually close the file just ** yet because that would clear those locks. Instead, add the file ** descriptor to pInode->pUnused list. It will be automatically closed @@ -32407,6 +34458,7 @@ */ setPendingFd(pFile); } + sqlite3_mutex_leave(pInode->pLockMutex); releaseInodeInfo(pFile); rc = closeUnixFile(id); unixLeaveMutex(); @@ -32717,7 +34769,7 @@ OSTRACE(("TEST WR-LOCK %d %d %d (flock)\n", pFile->h, rc, reserved)); #ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS - if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){ + if( (rc & 0xff) == SQLITE_IOERR ){ rc = SQLITE_OK; reserved=1; } @@ -32784,7 +34836,7 @@ OSTRACE(("LOCK %d %s %s (flock)\n", pFile->h, azFileLock(eFileLock), rc==SQLITE_OK ? "ok" : "failed")); #ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS - if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){ + if( (rc & 0xff) == SQLITE_IOERR ){ rc = SQLITE_BUSY; } #endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */ @@ -33004,6 +35056,7 @@ unixFile *pFile = (unixFile*)id; semXUnlock(id, NO_LOCK); assert( pFile ); + assert( unixFileMutexNotheld(pFile) ); unixEnterMutex(); releaseInodeInfo(pFile); unixLeaveMutex(); @@ -33118,8 +35171,7 @@ *pResOut = 1; return SQLITE_OK; } - unixEnterMutex(); /* Because pFile->pInode is shared across threads */ - + sqlite3_mutex_enter(pFile->pInode->pLockMutex); /* Check if a thread in this process holds such a lock */ if( pFile->pInode->eFileLock>SHARED_LOCK ){ reserved = 1; @@ -33143,7 +35195,7 @@ } } - unixLeaveMutex(); + sqlite3_mutex_leave(pFile->pInode->pLockMutex); OSTRACE(("TEST WR-LOCK %d %d %d (afp)\n", pFile->h, rc, reserved)); *pResOut = reserved; @@ -33206,8 +35258,8 @@ /* This mutex is needed because pFile->pInode is shared across threads */ - unixEnterMutex(); pInode = pFile->pInode; + sqlite3_mutex_enter(pInode->pLockMutex); /* If some thread using this PID has a lock via a different unixFile* ** handle that precludes the requested lock, return BUSY. @@ -33321,7 +35373,7 @@ /* Can't reestablish the shared lock. Sqlite can't deal, this is ** a critical I/O error */ - rc = ((failed & SQLITE_IOERR) == SQLITE_IOERR) ? failed2 : + rc = ((failed & 0xff) == SQLITE_IOERR) ? failed2 : SQLITE_IOERR_LOCK; goto afp_end_lock; } @@ -33343,7 +35395,7 @@ } afp_end_lock: - unixLeaveMutex(); + sqlite3_mutex_leave(pInode->pLockMutex); OSTRACE(("LOCK %d %s %s (afp)\n", pFile->h, azFileLock(eFileLock), rc==SQLITE_OK ? "ok" : "failed")); return rc; @@ -33375,8 +35427,8 @@ if( pFile->eFileLock<=eFileLock ){ return SQLITE_OK; } - unixEnterMutex(); pInode = pFile->pInode; + sqlite3_mutex_enter(pInode->pLockMutex); assert( pInode->nShared!=0 ); if( pFile->eFileLock>SHARED_LOCK ){ assert( pInode->eFileLock==pFile->eFileLock ); @@ -33445,14 +35497,14 @@ if( rc==SQLITE_OK ){ pInode->nLock--; assert( pInode->nLock>=0 ); - if( pInode->nLock==0 ){ - closePendingFds(pFile); - } + if( pInode->nLock==0 ) closePendingFds(pFile); } } - unixLeaveMutex(); - if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock; + sqlite3_mutex_leave(pInode->pLockMutex); + if( rc==SQLITE_OK ){ + pFile->eFileLock = eFileLock; + } return rc; } @@ -33464,14 +35516,20 @@ unixFile *pFile = (unixFile*)id; assert( id!=0 ); afpUnlock(id, NO_LOCK); + assert( unixFileMutexNotheld(pFile) ); unixEnterMutex(); - if( pFile->pInode && pFile->pInode->nLock ){ - /* If there are outstanding locks, do not actually close the file just - ** yet because that would clear those locks. Instead, add the file - ** descriptor to pInode->aPending. It will be automatically closed when - ** the last lock is cleared. - */ - setPendingFd(pFile); + if( pFile->pInode ){ + unixInodeInfo *pInode = pFile->pInode; + sqlite3_mutex_enter(pInode->pLockMutex); + if( pInode->nLock ){ + /* If there are outstanding locks, do not actually close the file just + ** yet because that would clear those locks. Instead, add the file + ** descriptor to pInode->aPending. It will be automatically closed when + ** the last lock is cleared. + */ + setPendingFd(pFile); + } + sqlite3_mutex_leave(pInode->pLockMutex); } releaseInodeInfo(pFile); sqlite3_free(pFile->lockingContext); @@ -33601,7 +35659,7 @@ /* If this is a database file (not a journal, master-journal or temp ** file), the bytes in the locking range should never be read or written. */ #if 0 - assert( pFile->pUnused==0 + assert( pFile->pPreallocatedUnused==0 || offset>=PENDING_BYTE+512 || offset+amt<=PENDING_BYTE ); @@ -33714,7 +35772,7 @@ /* If this is a database file (not a journal, master-journal or temp ** file), the bytes in the locking range should never be read or written. */ #if 0 - assert( pFile->pUnused==0 + assert( pFile->pPreallocatedUnused==0 || offset>=PENDING_BYTE+512 || offset+amt<=PENDING_BYTE ); @@ -34126,7 +36184,7 @@ do{ err = osFallocate(pFile->h, buf.st_size, nSize-buf.st_size); }while( err==EINTR ); - if( err ) return SQLITE_IOERR_WRITE; + if( err && err!=EINVAL ) return SQLITE_IOERR_WRITE; #else /* If the OS does not have posix_fallocate(), fake it. Write a ** single byte to the last byte in each block that falls entirely @@ -34194,6 +36252,21 @@ static int unixFileControl(sqlite3_file *id, int op, void *pArg){ unixFile *pFile = (unixFile*)id; switch( op ){ +#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + case SQLITE_FCNTL_BEGIN_ATOMIC_WRITE: { + int rc = osIoctl(pFile->h, F2FS_IOC_START_ATOMIC_WRITE); + return rc ? SQLITE_IOERR_BEGIN_ATOMIC : SQLITE_OK; + } + case SQLITE_FCNTL_COMMIT_ATOMIC_WRITE: { + int rc = osIoctl(pFile->h, F2FS_IOC_COMMIT_ATOMIC_WRITE); + return rc ? SQLITE_IOERR_COMMIT_ATOMIC : SQLITE_OK; + } + case SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE: { + int rc = osIoctl(pFile->h, F2FS_IOC_ABORT_VOLATILE_WRITE); + return rc ? SQLITE_IOERR_ROLLBACK_ATOMIC : SQLITE_OK; + } +#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */ + case SQLITE_FCNTL_LOCKSTATE: { *(int*)pArg = pFile->eFileLock; return SQLITE_OK; @@ -34237,6 +36310,12 @@ *(int*)pArg = fileHasMoved(pFile); return SQLITE_OK; } +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT + case SQLITE_FCNTL_LOCK_TIMEOUT: { + pFile->iBusyTimeout = *(int*)pArg; + return SQLITE_OK; + } +#endif #if SQLITE_MAX_MMAP_SIZE>0 case SQLITE_FCNTL_MMAP_SIZE: { i64 newLimit = *(i64*)pArg; @@ -34244,6 +36323,14 @@ if( newLimit>sqlite3GlobalConfig.mxMmap ){ newLimit = sqlite3GlobalConfig.mxMmap; } + + /* The value of newLimit may be eventually cast to (size_t) and passed + ** to mmap(). Restrict its value to 2GB if (size_t) is not at least a + ** 64-bit type. */ + if( newLimit>0 && sizeof(size_t)<8 ){ + newLimit = (newLimit & 0x7FFFFFFF); + } + *(i64*)pArg = pFile->mmapSizeMax; if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){ pFile->mmapSizeMax = newLimit; @@ -34277,30 +36364,41 @@ } /* -** Return the sector size in bytes of the underlying block device for -** the specified file. This is almost always 512 bytes, but may be -** larger for some devices. +** If pFd->sectorSize is non-zero when this function is called, it is a +** no-op. Otherwise, the values of pFd->sectorSize and +** pFd->deviceCharacteristics are set according to the file-system +** characteristics. ** -** SQLite code assumes this function cannot fail. It also assumes that -** if two files are created in the same file-system directory (i.e. -** a database and its journal file) that the sector size will be the -** same for both. +** There are two versions of this function. One for QNX and one for all +** other systems. */ -#ifndef __QNXNTO__ -static int unixSectorSize(sqlite3_file *NotUsed){ - UNUSED_PARAMETER(NotUsed); - return SQLITE_DEFAULT_SECTOR_SIZE; +#ifndef __QNXNTO__ +static void setDeviceCharacteristics(unixFile *pFd){ + assert( pFd->deviceCharacteristics==0 || pFd->sectorSize!=0 ); + if( pFd->sectorSize==0 ){ +#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + int res; + u32 f = 0; + + /* Check for support for F2FS atomic batch writes. */ + res = osIoctl(pFd->h, F2FS_IOC_GET_FEATURES, &f); + if( res==0 && (f & F2FS_FEATURE_ATOMIC_WRITE) ){ + pFd->deviceCharacteristics = SQLITE_IOCAP_BATCH_ATOMIC; + } +#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */ + + /* Set the POWERSAFE_OVERWRITE flag if requested. */ + if( pFd->ctrlFlags & UNIXFILE_PSOW ){ + pFd->deviceCharacteristics |= SQLITE_IOCAP_POWERSAFE_OVERWRITE; + } + + pFd->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE; + } } -#endif - -/* -** The following version of unixSectorSize() is optimized for QNX. -*/ -#ifdef __QNXNTO__ +#else #include #include -static int unixSectorSize(sqlite3_file *id){ - unixFile *pFile = (unixFile*)id; +static void setDeviceCharacteristics(unixFile *pFile){ if( pFile->sectorSize == 0 ){ struct statvfs fsInfo; @@ -34308,7 +36406,7 @@ pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE; pFile->deviceCharacteristics = 0; if( fstatvfs(pFile->h, &fsInfo) == -1 ) { - return pFile->sectorSize; + return; } if( !strcmp(fsInfo.f_basetype, "tmp") ) { @@ -34369,11 +36467,26 @@ pFile->deviceCharacteristics = 0; pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE; } - return pFile->sectorSize; } -#endif /* __QNXNTO__ */ +#endif /* +** Return the sector size in bytes of the underlying block device for +** the specified file. This is almost always 512 bytes, but may be +** larger for some devices. +** +** SQLite code assumes this function cannot fail. It also assumes that +** if two files are created in the same file-system directory (i.e. +** a database and its journal file) that the sector size will be the +** same for both. +*/ +static int unixSectorSize(sqlite3_file *id){ + unixFile *pFd = (unixFile*)id; + setDeviceCharacteristics(pFd); + return pFd->sectorSize; +} + +/* ** Return the device characteristics for the file. ** ** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default. @@ -34387,16 +36500,9 @@ ** available to turn it off and URI query parameter available to turn it off. */ static int unixDeviceCharacteristics(sqlite3_file *id){ - unixFile *p = (unixFile*)id; - int rc = 0; -#ifdef __QNXNTO__ - if( p->sectorSize==0 ) unixSectorSize(id); - rc = p->deviceCharacteristics; -#endif - if( p->ctrlFlags & UNIXFILE_PSOW ){ - rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE; - } - return rc; + unixFile *pFd = (unixFile*)id; + setDeviceCharacteristics(pFd); + return pFd->deviceCharacteristics; } #if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 @@ -34443,21 +36549,22 @@ ** ** The following fields are read-only after the object is created: ** -** fid +** hShm ** zFilename ** -** Either unixShmNode.mutex must be held or unixShmNode.nRef==0 and +** Either unixShmNode.pShmMutex must be held or unixShmNode.nRef==0 and ** unixMutexHeld() is true when reading or writing any other field ** in this structure. */ struct unixShmNode { unixInodeInfo *pInode; /* unixInodeInfo that owns this SHM node */ - sqlite3_mutex *mutex; /* Mutex to access this object */ + sqlite3_mutex *pShmMutex; /* Mutex to access this object */ char *zFilename; /* Name of the mmapped file */ - int h; /* Open file descriptor */ + int hShm; /* Open file descriptor */ int szRegion; /* Size of shared-memory regions */ u16 nRegion; /* Size of array apRegion */ u8 isReadonly; /* True if read-only */ + u8 isUnlocked; /* True if no DMS lock held */ char **apRegion; /* Array of mapped shared-memory regions */ int nRef; /* Number of unixShm objects pointing to this */ unixShm *pFirst; /* All unixShm objects pointing to this */ @@ -34475,16 +36582,16 @@ ** The following fields are initialized when this object is created and ** are read-only thereafter: ** -** unixShm.pFile +** unixShm.pShmNode ** unixShm.id ** -** All other fields are read/write. The unixShm.pFile->mutex must be held -** while accessing any read/write fields. +** All other fields are read/write. The unixShm.pShmNode->pShmMutex must +** be held while accessing any read/write fields. */ struct unixShm { unixShmNode *pShmNode; /* The underlying unixShmNode object */ unixShm *pNext; /* Next unixShm with the same unixShmNode */ - u8 hasMutex; /* True if holding the unixShmNode mutex */ + u8 hasMutex; /* True if holding the unixShmNode->pShmMutex */ u8 id; /* Id of this connection within its unixShmNode */ u16 sharedMask; /* Mask of shared locks held */ u16 exclMask; /* Mask of exclusive locks held */ @@ -34514,7 +36621,8 @@ /* Access to the unixShmNode object is serialized by the caller */ pShmNode = pFile->pInode->pShmNode; - assert( sqlite3_mutex_held(pShmNode->mutex) || pShmNode->nRef==0 ); + assert( pShmNode->nRef==0 || sqlite3_mutex_held(pShmNode->pShmMutex) ); + assert( pShmNode->nRef>0 || unixMutexHeld() ); /* Shared locks never span more than one byte */ assert( n==1 || lockType!=F_RDLCK ); @@ -34522,15 +36630,13 @@ /* Locks are within range */ assert( n>=1 && n<=SQLITE_SHM_NLOCK ); - if( pShmNode->h>=0 ){ + if( pShmNode->hShm>=0 ){ /* Initialize the locking parameters */ - memset(&f, 0, sizeof(f)); f.l_type = lockType; f.l_whence = SEEK_SET; f.l_start = ofst; f.l_len = n; - - rc = osFcntl(pShmNode->h, F_SETLK, &f); + rc = osSetPosixAdvisoryLock(pShmNode->hShm, &f, pFile); rc = (rc!=(-1)) ? SQLITE_OK : SQLITE_BUSY; } @@ -34602,9 +36708,9 @@ int nShmPerMap = unixShmRegionPerMap(); int i; assert( p->pInode==pFd->pInode ); - sqlite3_mutex_free(p->mutex); + sqlite3_mutex_free(p->pShmMutex); for(i=0; inRegion; i+=nShmPerMap){ - if( p->h>=0 ){ + if( p->hShm>=0 ){ osMunmap(p->apRegion[i], p->szRegion); }else{ sqlite3_free(p->apRegion[i]); @@ -34611,9 +36717,9 @@ } } sqlite3_free(p->apRegion); - if( p->h>=0 ){ - robust_close(pFd, p->h, __LINE__); - p->h = -1; + if( p->hShm>=0 ){ + robust_close(pFd, p->hShm, __LINE__); + p->hShm = -1; } p->pInode->pShmNode = 0; sqlite3_free(p); @@ -34621,6 +36727,69 @@ } /* +** The DMS lock has not yet been taken on shm file pShmNode. Attempt to +** take it now. Return SQLITE_OK if successful, or an SQLite error +** code otherwise. +** +** If the DMS cannot be locked because this is a readonly_shm=1 +** connection and no other process already holds a lock, return +** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1. +*/ +static int unixLockSharedMemory(unixFile *pDbFd, unixShmNode *pShmNode){ + struct flock lock; + int rc = SQLITE_OK; + + /* Use F_GETLK to determine the locks other processes are holding + ** on the DMS byte. If it indicates that another process is holding + ** a SHARED lock, then this process may also take a SHARED lock + ** and proceed with opening the *-shm file. + ** + ** Or, if no other process is holding any lock, then this process + ** is the first to open it. In this case take an EXCLUSIVE lock on the + ** DMS byte and truncate the *-shm file to zero bytes in size. Then + ** downgrade to a SHARED lock on the DMS byte. + ** + ** If another process is holding an EXCLUSIVE lock on the DMS byte, + ** return SQLITE_BUSY to the caller (it will try again). An earlier + ** version of this code attempted the SHARED lock at this point. But + ** this introduced a subtle race condition: if the process holding + ** EXCLUSIVE failed just before truncating the *-shm file, then this + ** process might open and use the *-shm file without truncating it. + ** And if the *-shm file has been corrupted by a power failure or + ** system crash, the database itself may also become corrupt. */ + lock.l_whence = SEEK_SET; + lock.l_start = UNIX_SHM_DMS; + lock.l_len = 1; + lock.l_type = F_WRLCK; + if( osFcntl(pShmNode->hShm, F_GETLK, &lock)!=0 ) { + rc = SQLITE_IOERR_LOCK; + }else if( lock.l_type==F_UNLCK ){ + if( pShmNode->isReadonly ){ + pShmNode->isUnlocked = 1; + rc = SQLITE_READONLY_CANTINIT; + }else{ + rc = unixShmSystemLock(pDbFd, F_WRLCK, UNIX_SHM_DMS, 1); + /* The first connection to attach must truncate the -shm file. We + ** truncate to 3 bytes (an arbitrary small number, less than the + ** -shm header size) rather than 0 as a system debugging aid, to + ** help detect if a -shm file truncation is legitimate or is the work + ** or a rogue process. */ + if( rc==SQLITE_OK && robust_ftruncate(pShmNode->hShm, 3) ){ + rc = unixLogError(SQLITE_IOERR_SHMOPEN,"ftruncate",pShmNode->zFilename); + } + } + }else if( lock.l_type==F_WRLCK ){ + rc = SQLITE_BUSY; + } + + if( rc==SQLITE_OK ){ + assert( lock.l_type==F_UNLCK || lock.l_type==F_RDLCK ); + rc = unixShmSystemLock(pDbFd, F_RDLCK, UNIX_SHM_DMS, 1); + } + return rc; +} + +/* ** Open a shared-memory area associated with open database file pDbFd. ** This particular implementation uses mmapped files. ** @@ -34658,9 +36827,9 @@ static int unixOpenSharedMemory(unixFile *pDbFd){ struct unixShm *p = 0; /* The connection to be opened */ struct unixShmNode *pShmNode; /* The underlying mmapped file */ - int rc; /* Result code */ + int rc = SQLITE_OK; /* Result code */ unixInodeInfo *pInode; /* The inode of fd */ - char *zShmFilename; /* Name of the file used for SHM */ + char *zShm; /* Name of the file used for SHM */ int nShmFilename; /* Size of the SHM filename in bytes */ /* Allocate space for the new unixShm object. */ @@ -34672,6 +36841,7 @@ /* Check to see if a unixShmNode object already exists. Reuse an existing ** one if present. Create a new one if necessary. */ + assert( unixFileMutexNotheld(pDbFd) ); unixEnterMutex(); pInode = pDbFd->pInode; pShmNode = pInode->pShmNode; @@ -34701,21 +36871,21 @@ goto shm_open_err; } memset(pShmNode, 0, sizeof(*pShmNode)+nShmFilename); - zShmFilename = pShmNode->zFilename = (char*)&pShmNode[1]; + zShm = pShmNode->zFilename = (char*)&pShmNode[1]; #ifdef SQLITE_SHM_DIRECTORY - sqlite3_snprintf(nShmFilename, zShmFilename, + sqlite3_snprintf(nShmFilename, zShm, SQLITE_SHM_DIRECTORY "/sqlite-shm-%x-%x", (u32)sStat.st_ino, (u32)sStat.st_dev); #else - sqlite3_snprintf(nShmFilename, zShmFilename, "%s-shm", zBasePath); - sqlite3FileSuffix3(pDbFd->zPath, zShmFilename); + sqlite3_snprintf(nShmFilename, zShm, "%s-shm", zBasePath); + sqlite3FileSuffix3(pDbFd->zPath, zShm); #endif - pShmNode->h = -1; + pShmNode->hShm = -1; pDbFd->pInode->pShmNode = pShmNode; pShmNode->pInode = pDbFd->pInode; if( sqlite3GlobalConfig.bCoreMutex ){ - pShmNode->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST); - if( pShmNode->mutex==0 ){ + pShmNode->pShmMutex = sqlite3_mutex_alloc(SQLITE_MUTEX_FAST); + if( pShmNode->pShmMutex==0 ){ rc = SQLITE_NOMEM_BKPT; goto shm_open_err; } @@ -34722,36 +36892,26 @@ } if( pInode->bProcessLock==0 ){ - int openFlags = O_RDWR | O_CREAT; - if( sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){ - openFlags = O_RDONLY; + if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){ + pShmNode->hShm = robust_open(zShm, O_RDWR|O_CREAT,(sStat.st_mode&0777)); + } + if( pShmNode->hShm<0 ){ + pShmNode->hShm = robust_open(zShm, O_RDONLY, (sStat.st_mode&0777)); + if( pShmNode->hShm<0 ){ + rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShm); + goto shm_open_err; + } pShmNode->isReadonly = 1; } - pShmNode->h = robust_open(zShmFilename, openFlags, (sStat.st_mode&0777)); - if( pShmNode->h<0 ){ - rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShmFilename); - goto shm_open_err; - } /* If this process is running as root, make sure that the SHM file ** is owned by the same user that owns the original database. Otherwise, ** the original owner will not be able to connect. */ - robustFchown(pShmNode->h, sStat.st_uid, sStat.st_gid); - - /* Check to see if another process is holding the dead-man switch. - ** If not, truncate the file to zero length. - */ - rc = SQLITE_OK; - if( unixShmSystemLock(pDbFd, F_WRLCK, UNIX_SHM_DMS, 1)==SQLITE_OK ){ - if( robust_ftruncate(pShmNode->h, 0) ){ - rc = unixLogError(SQLITE_IOERR_SHMOPEN, "ftruncate", zShmFilename); - } - } - if( rc==SQLITE_OK ){ - rc = unixShmSystemLock(pDbFd, F_RDLCK, UNIX_SHM_DMS, 1); - } - if( rc ) goto shm_open_err; + robustFchown(pShmNode->hShm, sStat.st_uid, sStat.st_gid); + + rc = unixLockSharedMemory(pDbFd, pShmNode); + if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err; } } @@ -34768,14 +36928,14 @@ ** the cover of the unixEnterMutex() mutex and the pointer from the ** new (struct unixShm) object to the pShmNode has been set. All that is ** left to do is to link the new object into the linked list starting - ** at pShmNode->pFirst. This must be done while holding the pShmNode->mutex - ** mutex. + ** at pShmNode->pFirst. This must be done while holding the + ** pShmNode->pShmMutex. */ - sqlite3_mutex_enter(pShmNode->mutex); + sqlite3_mutex_enter(pShmNode->pShmMutex); p->pNext = pShmNode->pFirst; pShmNode->pFirst = p; - sqlite3_mutex_leave(pShmNode->mutex); - return SQLITE_OK; + sqlite3_mutex_leave(pShmNode->pShmMutex); + return rc; /* Jump here on any error */ shm_open_err: @@ -34826,11 +36986,16 @@ p = pDbFd->pShm; pShmNode = p->pShmNode; - sqlite3_mutex_enter(pShmNode->mutex); + sqlite3_mutex_enter(pShmNode->pShmMutex); + if( pShmNode->isUnlocked ){ + rc = unixLockSharedMemory(pDbFd, pShmNode); + if( rc!=SQLITE_OK ) goto shmpage_out; + pShmNode->isUnlocked = 0; + } assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 ); assert( pShmNode->pInode==pDbFd->pInode ); - assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 ); - assert( pShmNode->h<0 || pDbFd->pInode->bProcessLock==0 ); + assert( pShmNode->hShm>=0 || pDbFd->pInode->bProcessLock==1 ); + assert( pShmNode->hShm<0 || pDbFd->pInode->bProcessLock==0 ); /* Minimum number of regions required to be mapped. */ nReqRegion = ((iRegion+nShmPerMap) / nShmPerMap) * nShmPerMap; @@ -34842,12 +37007,12 @@ pShmNode->szRegion = szRegion; - if( pShmNode->h>=0 ){ + if( pShmNode->hShm>=0 ){ /* The requested region is not mapped into this processes address space. ** Check to see if it has been allocated (i.e. if the wal-index file is ** large enough to contain the requested region). */ - if( osFstat(pShmNode->h, &sStat) ){ + if( osFstat(pShmNode->hShm, &sStat) ){ rc = SQLITE_IOERR_SHMSIZE; goto shmpage_out; } @@ -34875,7 +37040,7 @@ assert( (nByte % pgsz)==0 ); for(iPg=(sStat.st_size/pgsz); iPg<(nByte/pgsz); iPg++){ int x = 0; - if( seekAndWriteFd(pShmNode->h, iPg*pgsz + pgsz-1, "", 1, &x)!=1 ){ + if( seekAndWriteFd(pShmNode->hShm, iPg*pgsz + pgsz-1,"",1,&x)!=1 ){ const char *zFile = pShmNode->zFilename; rc = unixLogError(SQLITE_IOERR_SHMSIZE, "write", zFile); goto shmpage_out; @@ -34898,10 +37063,10 @@ int nMap = szRegion*nShmPerMap; int i; void *pMem; - if( pShmNode->h>=0 ){ + if( pShmNode->hShm>=0 ){ pMem = osMmap(0, nMap, pShmNode->isReadonly ? PROT_READ : PROT_READ|PROT_WRITE, - MAP_SHARED, pShmNode->h, szRegion*(i64)pShmNode->nRegion + MAP_SHARED, pShmNode->hShm, szRegion*(i64)pShmNode->nRegion ); if( pMem==MAP_FAILED ){ rc = unixLogError(SQLITE_IOERR_SHMMAP, "mmap", pShmNode->zFilename); @@ -34908,12 +37073,12 @@ goto shmpage_out; } }else{ - pMem = sqlite3_malloc64(szRegion); + pMem = sqlite3_malloc64(nMap); if( pMem==0 ){ rc = SQLITE_NOMEM_BKPT; goto shmpage_out; } - memset(pMem, 0, szRegion); + memset(pMem, 0, nMap); } for(i=0; iisReadonly && rc==SQLITE_OK ) rc = SQLITE_READONLY; - sqlite3_mutex_leave(pShmNode->mutex); + sqlite3_mutex_leave(pShmNode->pShmMutex); return rc; } @@ -34964,12 +37129,12 @@ || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED) || flags==(SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE) ); assert( n==1 || (flags & SQLITE_SHM_EXCLUSIVE)!=0 ); - assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 ); - assert( pShmNode->h<0 || pDbFd->pInode->bProcessLock==0 ); + assert( pShmNode->hShm>=0 || pDbFd->pInode->bProcessLock==1 ); + assert( pShmNode->hShm<0 || pDbFd->pInode->bProcessLock==0 ); mask = (1<<(ofst+n)) - (1<1 || mask==(1<mutex); + sqlite3_mutex_enter(pShmNode->pShmMutex); if( flags & SQLITE_SHM_UNLOCK ){ u16 allMask = 0; /* Mask of locks held by siblings */ @@ -35042,7 +37207,7 @@ } } } - sqlite3_mutex_leave(pShmNode->mutex); + sqlite3_mutex_leave(pShmNode->pShmMutex); OSTRACE(("SHM-LOCK shmid-%d, pid-%d got %03x,%03x\n", p->id, osGetpid(0), p->sharedMask, p->exclMask)); return rc; @@ -35059,6 +37224,9 @@ ){ UNUSED_PARAMETER(fd); sqlite3MemoryBarrier(); /* compiler-defined memory barrier */ + assert( fd->pMethods->xLock==nolockLock + || unixFileMutexNotheld((unixFile*)fd) + ); unixEnterMutex(); /* Also mutex, for redundancy */ unixLeaveMutex(); } @@ -35089,7 +37257,7 @@ /* Remove connection p from the set of connections associated ** with pShmNode */ - sqlite3_mutex_enter(pShmNode->mutex); + sqlite3_mutex_enter(pShmNode->pShmMutex); for(pp=&pShmNode->pFirst; (*pp)!=p; pp = &(*pp)->pNext){} *pp = p->pNext; @@ -35096,15 +37264,16 @@ /* Free the connection p */ sqlite3_free(p); pDbFd->pShm = 0; - sqlite3_mutex_leave(pShmNode->mutex); + sqlite3_mutex_leave(pShmNode->pShmMutex); /* If pShmNode->nRef has reached 0, then close the underlying ** shared-memory file, too */ + assert( unixFileMutexNotheld(pDbFd) ); unixEnterMutex(); assert( pShmNode->nRef>0 ); pShmNode->nRef--; if( pShmNode->nRef==0 ){ - if( deleteFlag && pShmNode->h>=0 ){ + if( deleteFlag && pShmNode->hShm>=0 ){ osUnlink(pShmNode->zFilename); } unixShmPurge(pDbFd); @@ -35426,7 +37595,7 @@ IOMETHODS( nolockIoFinder, /* Finder function name */ nolockIoMethods, /* sqlite3_io_methods object name */ - 3, /* shared memory is disabled */ + 3, /* shared memory and mmap are enabled */ nolockClose, /* xClose method */ nolockLock, /* xLock method */ nolockUnlock, /* xUnlock method */ @@ -35654,17 +37823,6 @@ assert( pNew->pInode==NULL ); - /* Usually the path zFilename should not be a relative pathname. The - ** exception is when opening the proxy "conch" file in builds that - ** include the special Apple locking styles. - */ -#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE - assert( zFilename==0 || zFilename[0]=='/' - || pVfs->pAppData==(void*)&autolockIoFinder ); -#else - assert( zFilename==0 || zFilename[0]=='/' ); -#endif - /* No locking occurs in temporary files */ assert( zFilename!=0 || (ctrlFlags & UNIXFILE_NOLOCK)!=0 ); @@ -35923,6 +38081,8 @@ #if !OS_VXWORKS struct stat sStat; /* Results of stat() call */ + unixEnterMutex(); + /* A stat() call may fail for various reasons. If this happens, it is ** almost certain that an open() call on the same path will also fail. ** For this reason, if an error occurs in the stat() call here, it is @@ -35931,10 +38091,9 @@ ** ** Even if a subsequent open() call does succeed, the consequences of ** not searching for a reusable file descriptor are not dire. */ - if( 0==osStat(zPath, &sStat) ){ + if( inodeList!=0 && 0==osStat(zPath, &sStat) ){ unixInodeInfo *pInode; - unixEnterMutex(); pInode = inodeList; while( pInode && (pInode->fileId.dev!=sStat.st_dev || pInode->fileId.ino!=(u64)sStat.st_ino) ){ @@ -35942,14 +38101,17 @@ } if( pInode ){ UnixUnusedFd **pp; + assert( sqlite3_mutex_notheld(pInode->pLockMutex) ); + sqlite3_mutex_enter(pInode->pLockMutex); for(pp=&pInode->pUnused; *pp && (*pp)->flags!=flags; pp=&((*pp)->pNext)); pUnused = *pp; if( pUnused ){ *pp = pUnused->pNext; } + sqlite3_mutex_leave(pInode->pLockMutex); } - unixLeaveMutex(); } + unixLeaveMutex(); #endif /* if !OS_VXWORKS */ return pUnused; } @@ -36025,16 +38187,11 @@ */ nDb = sqlite3Strlen30(zPath) - 1; while( zPath[nDb]!='-' ){ -#ifndef SQLITE_ENABLE_8_3_NAMES - /* In the normal case (8+3 filenames disabled) the journal filename - ** is guaranteed to contain a '-' character. */ - assert( nDb>0 ); - assert( sqlite3Isalnum(zPath[nDb]) ); -#else - /* If 8+3 names are possible, then the journal file might not contain - ** a '-' character. So check for that case and return early. */ + /* In normal operation, the journal file name will always contain + ** a '-' character. However in 8+3 filename mode, or if a corrupt + ** rollback journal specifies a master journal with a goofy name, then + ** the '-' might be missing. */ if( nDb==0 || zPath[nDb]=='.' ) return SQLITE_OK; -#endif nDb--; } memcpy(zDb, zPath, nDb); @@ -36109,7 +38266,7 @@ ** a file-descriptor on the directory too. The first time unixSync() ** is called the directory file descriptor will be fsync()ed and close()d. */ - int syncDir = (isCreate && ( + int isNewJrnl = (isCreate && ( eType==SQLITE_OPEN_MASTER_JOURNAL || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_WAL @@ -36156,7 +38313,6 @@ randomnessPid = osGetpid(0); sqlite3_randomness(0,0); } - memset(p, 0, sizeof(unixFile)); if( eType==SQLITE_OPEN_MAIN_DB ){ @@ -36170,7 +38326,7 @@ return SQLITE_NOMEM_BKPT; } } - p->pUnused = pUnused; + p->pPreallocatedUnused = pUnused; /* Database filenames are double-zero terminated if they are not ** URIs with parameters. Hence, they can always be passed into @@ -36179,7 +38335,7 @@ }else if( !zName ){ /* If zName is NULL, the upper layer is requesting a temp file. */ - assert(isDelete && !syncDir); + assert(isDelete && !isNewJrnl); rc = unixGetTempname(pVfs->mxPathname, zTmpname); if( rc!=SQLITE_OK ){ return rc; @@ -36207,7 +38363,7 @@ gid_t gid; /* Groupid for the file */ rc = findCreateFileMode(zName, flags, &openMode, &uid, &gid); if( rc!=SQLITE_OK ){ - assert( !p->pUnused ); + assert( !p->pPreallocatedUnused ); assert( eType==SQLITE_OPEN_WAL || eType==SQLITE_OPEN_MAIN_JOURNAL ); return rc; } @@ -36214,17 +38370,24 @@ fd = robust_open(zName, openFlags, openMode); OSTRACE(("OPENX %-3d %s 0%o\n", fd, zName, openFlags)); assert( !isExclusive || (openFlags & O_CREAT)!=0 ); - if( fd<0 && errno!=EISDIR && isReadWrite ){ - /* Failed to open the file for read/write access. Try read-only. */ - flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE); - openFlags &= ~(O_RDWR|O_CREAT); - flags |= SQLITE_OPEN_READONLY; - openFlags |= O_RDONLY; - isReadonly = 1; - fd = robust_open(zName, openFlags, openMode); + if( fd<0 ){ + if( isNewJrnl && errno==EACCES && osAccess(zName, F_OK) ){ + /* If unable to create a journal because the directory is not + ** writable, change the error code to indicate that. */ + rc = SQLITE_READONLY_DIRECTORY; + }else if( errno!=EISDIR && isReadWrite ){ + /* Failed to open the file for read/write access. Try read-only. */ + flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE); + openFlags &= ~(O_RDWR|O_CREAT); + flags |= SQLITE_OPEN_READONLY; + openFlags |= O_RDONLY; + isReadonly = 1; + fd = robust_open(zName, openFlags, openMode); + } } if( fd<0 ){ - rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName); + int rc2 = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName); + if( rc==SQLITE_OK ) rc = rc2; goto open_finished; } @@ -36241,9 +38404,9 @@ *pOutFlags = flags; } - if( p->pUnused ){ - p->pUnused->fd = fd; - p->pUnused->flags = flags; + if( p->pPreallocatedUnused ){ + p->pPreallocatedUnused->fd = fd; + p->pPreallocatedUnused->flags = flags; } if( isDelete ){ @@ -36284,7 +38447,7 @@ if( isReadonly ) ctrlFlags |= UNIXFILE_RDONLY; noLock = eType!=SQLITE_OPEN_MAIN_DB; if( noLock ) ctrlFlags |= UNIXFILE_NOLOCK; - if( syncDir ) ctrlFlags |= UNIXFILE_DIRSYNC; + if( isNewJrnl ) ctrlFlags |= UNIXFILE_DIRSYNC; if( flags & SQLITE_OPEN_URI ) ctrlFlags |= UNIXFILE_URI; #if SQLITE_ENABLE_LOCKING_STYLE @@ -36320,11 +38483,14 @@ } #endif + assert( zPath==0 || zPath[0]=='/' + || eType==SQLITE_OPEN_MASTER_JOURNAL || eType==SQLITE_OPEN_MAIN_JOURNAL + ); rc = fillInUnixFile(pVfs, fd, pFile, zPath, ctrlFlags); open_finished: if( rc!=SQLITE_OK ){ - sqlite3_free(p->pUnused); + sqlite3_free(p->pPreallocatedUnused); } return rc; } @@ -37065,7 +39231,7 @@ dummyVfs.zName = "dummy"; pUnused->fd = fd; pUnused->flags = openFlags; - pNew->pUnused = pUnused; + pNew->pPreallocatedUnused = pUnused; rc = fillInUnixFile(&dummyVfs, fd, (sqlite3_file*)pNew, path, 0); if( rc==SQLITE_OK ){ @@ -38015,12 +40181,13 @@ /* Double-check that the aSyscall[] array has been constructed ** correctly. See ticket [bb3a86e890c8e96ab] */ - assert( ArraySize(aSyscall)==28 ); + assert( ArraySize(aSyscall)==29 ); /* Register all VFSes defined in the aVfs[] array */ for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){ sqlite3_vfs_register(&aVfs[i], i==0); } + unixBigLock = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1); return SQLITE_OK; } @@ -38032,6 +40199,7 @@ ** This routine is a no-op for unix. */ SQLITE_API int sqlite3_os_end(void){ + unixBigLock = 0; return SQLITE_OK; } @@ -38523,8 +40691,7 @@ int nFetchOut; /* Number of outstanding xFetch references */ HANDLE hMap; /* Handle for accessing memory mapping */ void *pMapRegion; /* Area memory mapped */ - sqlite3_int64 mmapSize; /* Usable size of mapped region */ - sqlite3_int64 mmapSizeActual; /* Actual size of mapped region */ + sqlite3_int64 mmapSize; /* Size of mapped region */ sqlite3_int64 mmapSizeMax; /* Configured FCNTL_MMAP_SIZE value */ #endif }; @@ -38555,22 +40722,6 @@ #endif /* - * The value used with sqlite3_win32_set_directory() to specify that - * the data directory should be changed. - */ -#ifndef SQLITE_WIN32_DATA_DIRECTORY_TYPE -# define SQLITE_WIN32_DATA_DIRECTORY_TYPE (1) -#endif - -/* - * The value used with sqlite3_win32_set_directory() to specify that - * the temporary directory should be changed. - */ -#ifndef SQLITE_WIN32_TEMP_DIRECTORY_TYPE -# define SQLITE_WIN32_TEMP_DIRECTORY_TYPE (2) -#endif - -/* * If compiled with SQLITE_WIN32_MALLOC on Windows, we will use the * various Win32 API heap functions instead of our own. */ @@ -40166,13 +42317,13 @@ } /* -** This function sets the data directory or the temporary directory based on -** the provided arguments. The type argument must be 1 in order to set the -** data directory or 2 in order to set the temporary directory. The zValue -** argument is the name of the directory to use. The return value will be -** SQLITE_OK if successful. +** This function is the same as sqlite3_win32_set_directory (below); however, +** it accepts a UTF-8 string. */ -SQLITE_API int sqlite3_win32_set_directory(DWORD type, LPCWSTR zValue){ +SQLITE_API int sqlite3_win32_set_directory8( + unsigned long type, /* Identifier for directory being set or reset */ + const char *zValue /* New value for directory being set or reset */ +){ char **ppDirectory = 0; #ifndef SQLITE_OMIT_AUTOINIT int rc = sqlite3_initialize(); @@ -40188,15 +42339,15 @@ ); assert( !ppDirectory || sqlite3MemdebugHasType(*ppDirectory, MEMTYPE_HEAP) ); if( ppDirectory ){ - char *zValueUtf8 = 0; + char *zCopy = 0; if( zValue && zValue[0] ){ - zValueUtf8 = winUnicodeToUtf8(zValue); - if ( zValueUtf8==0 ){ + zCopy = sqlite3_mprintf("%s", zValue); + if ( zCopy==0 ){ return SQLITE_NOMEM_BKPT; } } sqlite3_free(*ppDirectory); - *ppDirectory = zValueUtf8; + *ppDirectory = zCopy; return SQLITE_OK; } return SQLITE_ERROR; @@ -40203,6 +42354,39 @@ } /* +** This function is the same as sqlite3_win32_set_directory (below); however, +** it accepts a UTF-16 string. +*/ +SQLITE_API int sqlite3_win32_set_directory16( + unsigned long type, /* Identifier for directory being set or reset */ + const void *zValue /* New value for directory being set or reset */ +){ + int rc; + char *zUtf8 = 0; + if( zValue ){ + zUtf8 = sqlite3_win32_unicode_to_utf8(zValue); + if( zUtf8==0 ) return SQLITE_NOMEM_BKPT; + } + rc = sqlite3_win32_set_directory8(type, zUtf8); + if( zUtf8 ) sqlite3_free(zUtf8); + return rc; +} + +/* +** This function sets the data directory or the temporary directory based on +** the provided arguments. The type argument must be 1 in order to set the +** data directory or 2 in order to set the temporary directory. The zValue +** argument is the name of the directory to use. The return value will be +** SQLITE_OK if successful. +*/ +SQLITE_API int sqlite3_win32_set_directory( + unsigned long type, /* Identifier for directory being set or reset */ + void *zValue /* New value for directory being set or reset */ +){ + return sqlite3_win32_set_directory16(type, zValue); +} + +/* ** The return value of winGetLastErrorMsg ** is zero if the error message fits in the buffer, or non-zero ** otherwise (if the message was truncated). @@ -41126,6 +43310,29 @@ winFile *pFile = (winFile*)id; /* File handle object */ int rc = SQLITE_OK; /* Return code for this function */ DWORD lastErrno; +#if SQLITE_MAX_MMAP_SIZE>0 + sqlite3_int64 oldMmapSize; + if( pFile->nFetchOut>0 ){ + /* File truncation is a no-op if there are outstanding memory mapped + ** pages. This is because truncating the file means temporarily unmapping + ** the file, and that might delete memory out from under existing cursors. + ** + ** This can result in incremental vacuum not truncating the file, + ** if there is an active read cursor when the incremental vacuum occurs. + ** No real harm comes of this - the database file is not corrupted, + ** though some folks might complain that the file is bigger than it + ** needs to be. + ** + ** The only feasible work-around is to defer the truncation until after + ** all references to memory-mapped content are closed. That is doable, + ** but involves adding a few branches in the common write code path which + ** could slow down normal operations slightly. Hence, we have decided for + ** now to simply make trancations a no-op if there are pending reads. We + ** can maybe revisit this decision in the future. + */ + return SQLITE_OK; + } +#endif assert( pFile ); SimulateIOError(return SQLITE_IOERR_TRUNCATE); @@ -41141,6 +43348,15 @@ nByte = ((nByte + pFile->szChunk - 1)/pFile->szChunk) * pFile->szChunk; } +#if SQLITE_MAX_MMAP_SIZE>0 + if( pFile->pMapRegion ){ + oldMmapSize = pFile->mmapSize; + }else{ + oldMmapSize = 0; + } + winUnmapfile(pFile); +#endif + /* SetEndOfFile() returns non-zero when successful, or zero when it fails. */ if( winSeekFile(pFile, nByte) ){ rc = winLogError(SQLITE_IOERR_TRUNCATE, pFile->lastErrno, @@ -41153,12 +43369,12 @@ } #if SQLITE_MAX_MMAP_SIZE>0 - /* If the file was truncated to a size smaller than the currently - ** mapped region, reduce the effective mapping size as well. SQLite will - ** use read() and write() to access data beyond this point from now on. - */ - if( pFile->pMapRegion && nBytemmapSize ){ - pFile->mmapSize = nByte; + if( rc==SQLITE_OK && oldMmapSize>0 ){ + if( oldMmapSize>nByte ){ + winMapfile(pFile, -1); + }else{ + winMapfile(pFile, oldMmapSize); + } } #endif @@ -41798,6 +44014,14 @@ if( newLimit>sqlite3GlobalConfig.mxMmap ){ newLimit = sqlite3GlobalConfig.mxMmap; } + + /* The value of newLimit may be eventually cast to (SIZE_T) and passed + ** to MapViewOfFile(). Restrict its value to 2GB if (SIZE_T) is not at + ** least a 64-bit type. */ + if( newLimit>0 && sizeof(SIZE_T)<8 ){ + newLimit = (newLimit & 0x7FFFFFFF); + } + *(i64*)pArg = pFile->mmapSizeMax; if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){ pFile->mmapSizeMax = newLimit; @@ -41862,15 +44086,16 @@ ** assert( winShmMutexHeld() ); ** winShmLeaveMutex() */ +static sqlite3_mutex *winBigLock = 0; static void winShmEnterMutex(void){ - sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + sqlite3_mutex_enter(winBigLock); } static void winShmLeaveMutex(void){ - sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + sqlite3_mutex_leave(winBigLock); } #ifndef NDEBUG static int winShmMutexHeld(void) { - return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + return sqlite3_mutex_held(winBigLock); } #endif @@ -41904,6 +44129,9 @@ int szRegion; /* Size of shared-memory regions */ int nRegion; /* Size of array apRegion */ + u8 isReadonly; /* True if read-only */ + u8 isUnlocked; /* True if no DMS lock held */ + struct ShmRegion { HANDLE hMap; /* File handle from CreateFileMapping */ void *pMap; @@ -41970,7 +44198,7 @@ int rc = 0; /* Result code form Lock/UnlockFileEx() */ /* Access to the winShmNode object is serialized by the caller */ - assert( sqlite3_mutex_held(pFile->mutex) || pFile->nRef==0 ); + assert( pFile->nRef==0 || sqlite3_mutex_held(pFile->mutex) ); OSTRACE(("SHM-LOCK file=%p, lock=%d, offset=%d, size=%d\n", pFile->hFile.h, lockType, ofst, nByte)); @@ -42052,6 +44280,37 @@ } /* +** The DMS lock has not yet been taken on shm file pShmNode. Attempt to +** take it now. Return SQLITE_OK if successful, or an SQLite error +** code otherwise. +** +** If the DMS cannot be locked because this is a readonly_shm=1 +** connection and no other process already holds a lock, return +** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1. +*/ +static int winLockSharedMemory(winShmNode *pShmNode){ + int rc = winShmSystemLock(pShmNode, WINSHM_WRLCK, WIN_SHM_DMS, 1); + + if( rc==SQLITE_OK ){ + if( pShmNode->isReadonly ){ + pShmNode->isUnlocked = 1; + winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); + return SQLITE_READONLY_CANTINIT; + }else if( winTruncate((sqlite3_file*)&pShmNode->hFile, 0) ){ + winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); + return winLogError(SQLITE_IOERR_SHMOPEN, osGetLastError(), + "winLockSharedMemory", pShmNode->zFilename); + } + } + + if( rc==SQLITE_OK ){ + winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); + } + + return winShmSystemLock(pShmNode, WINSHM_RDLCK, WIN_SHM_DMS, 1); +} + +/* ** Open the shared-memory area associated with database file pDbFd. ** ** When opening a new shared-memory file, if no other instances of that @@ -42060,9 +44319,9 @@ */ static int winOpenSharedMemory(winFile *pDbFd){ struct winShm *p; /* The connection to be opened */ - struct winShmNode *pShmNode = 0; /* The underlying mmapped file */ - int rc; /* Result code */ - struct winShmNode *pNew; /* Newly allocated winShmNode */ + winShmNode *pShmNode = 0; /* The underlying mmapped file */ + int rc = SQLITE_OK; /* Result code */ + winShmNode *pNew; /* Newly allocated winShmNode */ int nName; /* Size of zName in bytes */ assert( pDbFd->pShm==0 ); /* Not previously opened */ @@ -42095,6 +44354,9 @@ if( pShmNode ){ sqlite3_free(pNew); }else{ + int inFlags = SQLITE_OPEN_WAL; + int outFlags = 0; + pShmNode = pNew; pNew = 0; ((winFile*)(&pShmNode->hFile))->h = INVALID_HANDLE_VALUE; @@ -42109,30 +44371,23 @@ } } - rc = winOpen(pDbFd->pVfs, - pShmNode->zFilename, /* Name of the file (UTF-8) */ - (sqlite3_file*)&pShmNode->hFile, /* File handle here */ - SQLITE_OPEN_WAL | SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, - 0); - if( SQLITE_OK!=rc ){ + if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){ + inFlags |= SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE; + }else{ + inFlags |= SQLITE_OPEN_READONLY; + } + rc = winOpen(pDbFd->pVfs, pShmNode->zFilename, + (sqlite3_file*)&pShmNode->hFile, + inFlags, &outFlags); + if( rc!=SQLITE_OK ){ + rc = winLogError(rc, osGetLastError(), "winOpenShm", + pShmNode->zFilename); goto shm_open_err; } + if( outFlags==SQLITE_OPEN_READONLY ) pShmNode->isReadonly = 1; - /* Check to see if another process is holding the dead-man switch. - ** If not, truncate the file to zero length. - */ - if( winShmSystemLock(pShmNode, WINSHM_WRLCK, WIN_SHM_DMS, 1)==SQLITE_OK ){ - rc = winTruncate((sqlite3_file *)&pShmNode->hFile, 0); - if( rc!=SQLITE_OK ){ - rc = winLogError(SQLITE_IOERR_SHMOPEN, osGetLastError(), - "winOpenShm", pDbFd->zPath); - } - } - if( rc==SQLITE_OK ){ - winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); - rc = winShmSystemLock(pShmNode, WINSHM_RDLCK, WIN_SHM_DMS, 1); - } - if( rc ) goto shm_open_err; + rc = winLockSharedMemory(pShmNode); + if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err; } /* Make the new connection a child of the winShmNode */ @@ -42155,7 +44410,7 @@ p->pNext = pShmNode->pFirst; pShmNode->pFirst = p; sqlite3_mutex_leave(pShmNode->mutex); - return SQLITE_OK; + return rc; /* Jump here on any error */ shm_open_err: @@ -42359,6 +44614,8 @@ winFile *pDbFd = (winFile*)fd; winShm *pShm = pDbFd->pShm; winShmNode *pShmNode; + DWORD protect = PAGE_READWRITE; + DWORD flags = FILE_MAP_WRITE | FILE_MAP_READ; int rc = SQLITE_OK; if( !pShm ){ @@ -42369,6 +44626,11 @@ pShmNode = pShm->pShmNode; sqlite3_mutex_enter(pShmNode->mutex); + if( pShmNode->isUnlocked ){ + rc = winLockSharedMemory(pShmNode); + if( rc!=SQLITE_OK ) goto shmpage_out; + pShmNode->isUnlocked = 0; + } assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 ); if( pShmNode->nRegion<=iRegion ){ @@ -42415,6 +44677,11 @@ } pShmNode->aRegion = apNew; + if( pShmNode->isReadonly ){ + protect = PAGE_READONLY; + flags = FILE_MAP_READ; + } + while( pShmNode->nRegion<=iRegion ){ HANDLE hMap = NULL; /* file-mapping handle */ void *pMap = 0; /* Mapped memory region */ @@ -42421,15 +44688,15 @@ #if SQLITE_OS_WINRT hMap = osCreateFileMappingFromApp(pShmNode->hFile.h, - NULL, PAGE_READWRITE, nByte, NULL + NULL, protect, nByte, NULL ); #elif defined(SQLITE_WIN32_HAS_WIDE) hMap = osCreateFileMappingW(pShmNode->hFile.h, - NULL, PAGE_READWRITE, 0, nByte, NULL + NULL, protect, 0, nByte, NULL ); #elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA hMap = osCreateFileMappingA(pShmNode->hFile.h, - NULL, PAGE_READWRITE, 0, nByte, NULL + NULL, protect, 0, nByte, NULL ); #endif OSTRACE(("SHM-MAP-CREATE pid=%lu, region=%d, size=%d, rc=%s\n", @@ -42439,11 +44706,11 @@ int iOffset = pShmNode->nRegion*szRegion; int iOffsetShift = iOffset % winSysInfo.dwAllocationGranularity; #if SQLITE_OS_WINRT - pMap = osMapViewOfFileFromApp(hMap, FILE_MAP_WRITE | FILE_MAP_READ, + pMap = osMapViewOfFileFromApp(hMap, flags, iOffset - iOffsetShift, szRegion + iOffsetShift ); #else - pMap = osMapViewOfFile(hMap, FILE_MAP_WRITE | FILE_MAP_READ, + pMap = osMapViewOfFile(hMap, flags, 0, iOffset - iOffsetShift, szRegion + iOffsetShift ); #endif @@ -42474,6 +44741,7 @@ }else{ *pp = 0; } + if( pShmNode->isReadonly && rc==SQLITE_OK ) rc = SQLITE_READONLY; sqlite3_mutex_leave(pShmNode->mutex); return rc; } @@ -42492,9 +44760,9 @@ static int winUnmapfile(winFile *pFile){ assert( pFile!=0 ); OSTRACE(("UNMAP-FILE pid=%lu, pFile=%p, hMap=%p, pMapRegion=%p, " - "mmapSize=%lld, mmapSizeActual=%lld, mmapSizeMax=%lld\n", + "mmapSize=%lld, mmapSizeMax=%lld\n", osGetCurrentProcessId(), pFile, pFile->hMap, pFile->pMapRegion, - pFile->mmapSize, pFile->mmapSizeActual, pFile->mmapSizeMax)); + pFile->mmapSize, pFile->mmapSizeMax)); if( pFile->pMapRegion ){ if( !osUnmapViewOfFile(pFile->pMapRegion) ){ pFile->lastErrno = osGetLastError(); @@ -42506,7 +44774,6 @@ } pFile->pMapRegion = 0; pFile->mmapSize = 0; - pFile->mmapSizeActual = 0; } if( pFile->hMap!=NULL ){ if( !osCloseHandle(pFile->hMap) ){ @@ -42617,7 +44884,6 @@ } pFd->pMapRegion = pNew; pFd->mmapSize = nMap; - pFd->mmapSizeActual = nMap; } OSTRACE(("MAP-FILE pid=%lu, pFile=%p, rc=SQLITE_OK\n", @@ -43110,6 +45376,14 @@ return (attr!=INVALID_FILE_ATTRIBUTES) && (attr&FILE_ATTRIBUTE_DIRECTORY); } +/* forward reference */ +static int winAccess( + sqlite3_vfs *pVfs, /* Not used on win32 */ + const char *zFilename, /* Name of file to check */ + int flags, /* Type of test to make on this file */ + int *pResOut /* OUT: Result */ +); + /* ** Open a file. */ @@ -43286,37 +45560,58 @@ extendedParameters.dwSecurityQosFlags = SECURITY_ANONYMOUS; extendedParameters.lpSecurityAttributes = NULL; extendedParameters.hTemplateFile = NULL; - while( (h = osCreateFile2((LPCWSTR)zConverted, - dwDesiredAccess, - dwShareMode, - dwCreationDisposition, - &extendedParameters))==INVALID_HANDLE_VALUE && - winRetryIoerr(&cnt, &lastErrno) ){ - /* Noop */ - } + do{ + h = osCreateFile2((LPCWSTR)zConverted, + dwDesiredAccess, + dwShareMode, + dwCreationDisposition, + &extendedParameters); + if( h!=INVALID_HANDLE_VALUE ) break; + if( isReadWrite ){ + int rc2, isRO = 0; + sqlite3BeginBenignMalloc(); + rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO); + sqlite3EndBenignMalloc(); + if( rc2==SQLITE_OK && isRO ) break; + } + }while( winRetryIoerr(&cnt, &lastErrno) ); #else - while( (h = osCreateFileW((LPCWSTR)zConverted, - dwDesiredAccess, - dwShareMode, NULL, - dwCreationDisposition, - dwFlagsAndAttributes, - NULL))==INVALID_HANDLE_VALUE && - winRetryIoerr(&cnt, &lastErrno) ){ - /* Noop */ - } + do{ + h = osCreateFileW((LPCWSTR)zConverted, + dwDesiredAccess, + dwShareMode, NULL, + dwCreationDisposition, + dwFlagsAndAttributes, + NULL); + if( h!=INVALID_HANDLE_VALUE ) break; + if( isReadWrite ){ + int rc2, isRO = 0; + sqlite3BeginBenignMalloc(); + rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO); + sqlite3EndBenignMalloc(); + if( rc2==SQLITE_OK && isRO ) break; + } + }while( winRetryIoerr(&cnt, &lastErrno) ); #endif } #ifdef SQLITE_WIN32_HAS_ANSI else{ - while( (h = osCreateFileA((LPCSTR)zConverted, - dwDesiredAccess, - dwShareMode, NULL, - dwCreationDisposition, - dwFlagsAndAttributes, - NULL))==INVALID_HANDLE_VALUE && - winRetryIoerr(&cnt, &lastErrno) ){ - /* Noop */ - } + do{ + h = osCreateFileA((LPCSTR)zConverted, + dwDesiredAccess, + dwShareMode, NULL, + dwCreationDisposition, + dwFlagsAndAttributes, + NULL); + if( h!=INVALID_HANDLE_VALUE ) break; + if( isReadWrite ){ + int rc2, isRO = 0; + sqlite3BeginBenignMalloc(); + rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO); + sqlite3EndBenignMalloc(); + if( rc2==SQLITE_OK && isRO ) break; + } + }while( winRetryIoerr(&cnt, &lastErrno) ); } #endif winLogIoerr(cnt, __LINE__); @@ -43325,8 +45620,6 @@ dwDesiredAccess, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok")); if( h==INVALID_HANDLE_VALUE ){ - pFile->lastErrno = lastErrno; - winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name); sqlite3_free(zConverted); sqlite3_free(zTmpname); if( isReadWrite && !isExclusive ){ @@ -43335,6 +45628,8 @@ ~(SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE)), pOutFlags); }else{ + pFile->lastErrno = lastErrno; + winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name); return SQLITE_CANTOPEN_BKPT; } } @@ -43390,7 +45685,6 @@ pFile->hMap = NULL; pFile->pMapRegion = 0; pFile->mmapSize = 0; - pFile->mmapSizeActual = 0; pFile->mmapSizeMax = sqlite3GlobalConfig.szMmap; #endif @@ -43927,9 +46221,6 @@ EntropyGatherer e; UNUSED_PARAMETER(pVfs); memset(zBuf, 0, nBuf); -#if defined(_MSC_VER) && _MSC_VER>=1400 && !SQLITE_OS_WINCE - rand_s((unsigned int*)zBuf); /* rand_s() is not available with MinGW */ -#endif /* defined(_MSC_VER) && _MSC_VER>=1400 */ e.a = (unsigned char*)zBuf; e.na = nBuf; e.nXor = 0; @@ -44224,6 +46515,10 @@ sqlite3_vfs_register(&winLongPathNolockVfs, 0); #endif +#ifndef SQLITE_OMIT_WAL + winBigLock = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1); +#endif + return SQLITE_OK; } @@ -44234,6 +46529,11 @@ sleepObj = NULL; } #endif + +#ifndef SQLITE_OMIT_WAL + winBigLock = 0; +#endif + return SQLITE_OK; } @@ -44240,6 +46540,598 @@ #endif /* SQLITE_OS_WIN */ /************** End of os_win.c **********************************************/ +/************** Begin file memdb.c *******************************************/ +/* +** 2016-09-07 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file implements an in-memory VFS. A database is held as a contiguous +** block of memory. +** +** This file also implements interface sqlite3_serialize() and +** sqlite3_deserialize(). +*/ +/* #include "sqliteInt.h" */ +#ifdef SQLITE_ENABLE_DESERIALIZE + +/* +** Forward declaration of objects used by this utility +*/ +typedef struct sqlite3_vfs MemVfs; +typedef struct MemFile MemFile; + +/* Access to a lower-level VFS that (might) implement dynamic loading, +** access to randomness, etc. +*/ +#define ORIGVFS(p) ((sqlite3_vfs*)((p)->pAppData)) + +/* An open file */ +struct MemFile { + sqlite3_file base; /* IO methods */ + sqlite3_int64 sz; /* Size of the file */ + sqlite3_int64 szMax; /* Space allocated to aData */ + unsigned char *aData; /* content of the file */ + int nMmap; /* Number of memory mapped pages */ + unsigned mFlags; /* Flags */ + int eLock; /* Most recent lock against this file */ +}; + +/* +** Methods for MemFile +*/ +static int memdbClose(sqlite3_file*); +static int memdbRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); +static int memdbWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst); +static int memdbTruncate(sqlite3_file*, sqlite3_int64 size); +static int memdbSync(sqlite3_file*, int flags); +static int memdbFileSize(sqlite3_file*, sqlite3_int64 *pSize); +static int memdbLock(sqlite3_file*, int); +/* static int memdbCheckReservedLock(sqlite3_file*, int *pResOut);// not used */ +static int memdbFileControl(sqlite3_file*, int op, void *pArg); +/* static int memdbSectorSize(sqlite3_file*); // not used */ +static int memdbDeviceCharacteristics(sqlite3_file*); +static int memdbFetch(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp); +static int memdbUnfetch(sqlite3_file*, sqlite3_int64 iOfst, void *p); + +/* +** Methods for MemVfs +*/ +static int memdbOpen(sqlite3_vfs*, const char *, sqlite3_file*, int , int *); +/* static int memdbDelete(sqlite3_vfs*, const char *zName, int syncDir); */ +static int memdbAccess(sqlite3_vfs*, const char *zName, int flags, int *); +static int memdbFullPathname(sqlite3_vfs*, const char *zName, int, char *zOut); +static void *memdbDlOpen(sqlite3_vfs*, const char *zFilename); +static void memdbDlError(sqlite3_vfs*, int nByte, char *zErrMsg); +static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char*zSym))(void); +static void memdbDlClose(sqlite3_vfs*, void*); +static int memdbRandomness(sqlite3_vfs*, int nByte, char *zOut); +static int memdbSleep(sqlite3_vfs*, int microseconds); +/* static int memdbCurrentTime(sqlite3_vfs*, double*); */ +static int memdbGetLastError(sqlite3_vfs*, int, char *); +static int memdbCurrentTimeInt64(sqlite3_vfs*, sqlite3_int64*); + +static sqlite3_vfs memdb_vfs = { + 2, /* iVersion */ + 0, /* szOsFile (set when registered) */ + 1024, /* mxPathname */ + 0, /* pNext */ + "memdb", /* zName */ + 0, /* pAppData (set when registered) */ + memdbOpen, /* xOpen */ + 0, /* memdbDelete, */ /* xDelete */ + memdbAccess, /* xAccess */ + memdbFullPathname, /* xFullPathname */ + memdbDlOpen, /* xDlOpen */ + memdbDlError, /* xDlError */ + memdbDlSym, /* xDlSym */ + memdbDlClose, /* xDlClose */ + memdbRandomness, /* xRandomness */ + memdbSleep, /* xSleep */ + 0, /* memdbCurrentTime, */ /* xCurrentTime */ + memdbGetLastError, /* xGetLastError */ + memdbCurrentTimeInt64 /* xCurrentTimeInt64 */ +}; + +static const sqlite3_io_methods memdb_io_methods = { + 3, /* iVersion */ + memdbClose, /* xClose */ + memdbRead, /* xRead */ + memdbWrite, /* xWrite */ + memdbTruncate, /* xTruncate */ + memdbSync, /* xSync */ + memdbFileSize, /* xFileSize */ + memdbLock, /* xLock */ + memdbLock, /* xUnlock - same as xLock in this case */ + 0, /* memdbCheckReservedLock, */ /* xCheckReservedLock */ + memdbFileControl, /* xFileControl */ + 0, /* memdbSectorSize,*/ /* xSectorSize */ + memdbDeviceCharacteristics, /* xDeviceCharacteristics */ + 0, /* xShmMap */ + 0, /* xShmLock */ + 0, /* xShmBarrier */ + 0, /* xShmUnmap */ + memdbFetch, /* xFetch */ + memdbUnfetch /* xUnfetch */ +}; + + + +/* +** Close an memdb-file. +** +** The pData pointer is owned by the application, so there is nothing +** to free. +*/ +static int memdbClose(sqlite3_file *pFile){ + MemFile *p = (MemFile *)pFile; + if( p->mFlags & SQLITE_DESERIALIZE_FREEONCLOSE ) sqlite3_free(p->aData); + return SQLITE_OK; +} + +/* +** Read data from an memdb-file. +*/ +static int memdbRead( + sqlite3_file *pFile, + void *zBuf, + int iAmt, + sqlite_int64 iOfst +){ + MemFile *p = (MemFile *)pFile; + if( iOfst+iAmt>p->sz ){ + memset(zBuf, 0, iAmt); + if( iOfstsz ) memcpy(zBuf, p->aData+iOfst, p->sz - iOfst); + return SQLITE_IOERR_SHORT_READ; + } + memcpy(zBuf, p->aData+iOfst, iAmt); + return SQLITE_OK; +} + +/* +** Try to enlarge the memory allocation to hold at least sz bytes +*/ +static int memdbEnlarge(MemFile *p, sqlite3_int64 newSz){ + unsigned char *pNew; + if( (p->mFlags & SQLITE_DESERIALIZE_RESIZEABLE)==0 || p->nMmap>0 ){ + return SQLITE_FULL; + } + pNew = sqlite3_realloc64(p->aData, newSz); + if( pNew==0 ) return SQLITE_NOMEM; + p->aData = pNew; + p->szMax = newSz; + return SQLITE_OK; +} + +/* +** Write data to an memdb-file. +*/ +static int memdbWrite( + sqlite3_file *pFile, + const void *z, + int iAmt, + sqlite_int64 iOfst +){ + MemFile *p = (MemFile *)pFile; + if( iOfst+iAmt>p->sz ){ + int rc; + if( iOfst+iAmt>p->szMax + && (rc = memdbEnlarge(p, (iOfst+iAmt)*2))!=SQLITE_OK + ){ + return rc; + } + if( iOfst>p->sz ) memset(p->aData+p->sz, 0, iOfst-p->sz); + p->sz = iOfst+iAmt; + } + memcpy(p->aData+iOfst, z, iAmt); + return SQLITE_OK; +} + +/* +** Truncate an memdb-file. +** +** In rollback mode (which is always the case for memdb, as it does not +** support WAL mode) the truncate() method is only used to reduce +** the size of a file, never to increase the size. +*/ +static int memdbTruncate(sqlite3_file *pFile, sqlite_int64 size){ + MemFile *p = (MemFile *)pFile; + if( NEVER(size>p->sz) ) return SQLITE_FULL; + p->sz = size; + return SQLITE_OK; +} + +/* +** Sync an memdb-file. +*/ +static int memdbSync(sqlite3_file *pFile, int flags){ + return SQLITE_OK; +} + +/* +** Return the current file-size of an memdb-file. +*/ +static int memdbFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){ + MemFile *p = (MemFile *)pFile; + *pSize = p->sz; + return SQLITE_OK; +} + +/* +** Lock an memdb-file. +*/ +static int memdbLock(sqlite3_file *pFile, int eLock){ + MemFile *p = (MemFile *)pFile; + p->eLock = eLock; + return SQLITE_OK; +} + +#if 0 /* Never used because memdbAccess() always returns false */ +/* +** Check if another file-handle holds a RESERVED lock on an memdb-file. +*/ +static int memdbCheckReservedLock(sqlite3_file *pFile, int *pResOut){ + *pResOut = 0; + return SQLITE_OK; +} +#endif + +/* +** File control method. For custom operations on an memdb-file. +*/ +static int memdbFileControl(sqlite3_file *pFile, int op, void *pArg){ + MemFile *p = (MemFile *)pFile; + int rc = SQLITE_NOTFOUND; + if( op==SQLITE_FCNTL_VFSNAME ){ + *(char**)pArg = sqlite3_mprintf("memdb(%p,%lld)", p->aData, p->sz); + rc = SQLITE_OK; + } + return rc; +} + +#if 0 /* Not used because of SQLITE_IOCAP_POWERSAFE_OVERWRITE */ +/* +** Return the sector-size in bytes for an memdb-file. +*/ +static int memdbSectorSize(sqlite3_file *pFile){ + return 1024; +} +#endif + +/* +** Return the device characteristic flags supported by an memdb-file. +*/ +static int memdbDeviceCharacteristics(sqlite3_file *pFile){ + return SQLITE_IOCAP_ATOMIC | + SQLITE_IOCAP_POWERSAFE_OVERWRITE | + SQLITE_IOCAP_SAFE_APPEND | + SQLITE_IOCAP_SEQUENTIAL; +} + +/* Fetch a page of a memory-mapped file */ +static int memdbFetch( + sqlite3_file *pFile, + sqlite3_int64 iOfst, + int iAmt, + void **pp +){ + MemFile *p = (MemFile *)pFile; + p->nMmap++; + *pp = (void*)(p->aData + iOfst); + return SQLITE_OK; +} + +/* Release a memory-mapped page */ +static int memdbUnfetch(sqlite3_file *pFile, sqlite3_int64 iOfst, void *pPage){ + MemFile *p = (MemFile *)pFile; + p->nMmap--; + return SQLITE_OK; +} + +/* +** Open an mem file handle. +*/ +static int memdbOpen( + sqlite3_vfs *pVfs, + const char *zName, + sqlite3_file *pFile, + int flags, + int *pOutFlags +){ + MemFile *p = (MemFile*)pFile; + if( (flags & SQLITE_OPEN_MAIN_DB)==0 ){ + return ORIGVFS(pVfs)->xOpen(ORIGVFS(pVfs), zName, pFile, flags, pOutFlags); + } + memset(p, 0, sizeof(*p)); + p->mFlags = SQLITE_DESERIALIZE_RESIZEABLE | SQLITE_DESERIALIZE_FREEONCLOSE; + assert( pOutFlags!=0 ); /* True because flags==SQLITE_OPEN_MAIN_DB */ + *pOutFlags = flags | SQLITE_OPEN_MEMORY; + p->base.pMethods = &memdb_io_methods; + return SQLITE_OK; +} + +#if 0 /* Only used to delete rollback journals, master journals, and WAL + ** files, none of which exist in memdb. So this routine is never used */ +/* +** Delete the file located at zPath. If the dirSync argument is true, +** ensure the file-system modifications are synced to disk before +** returning. +*/ +static int memdbDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){ + return SQLITE_IOERR_DELETE; +} +#endif + +/* +** Test for access permissions. Return true if the requested permission +** is available, or false otherwise. +** +** With memdb, no files ever exist on disk. So always return false. +*/ +static int memdbAccess( + sqlite3_vfs *pVfs, + const char *zPath, + int flags, + int *pResOut +){ + *pResOut = 0; + return SQLITE_OK; +} + +/* +** Populate buffer zOut with the full canonical pathname corresponding +** to the pathname in zPath. zOut is guaranteed to point to a buffer +** of at least (INST_MAX_PATHNAME+1) bytes. +*/ +static int memdbFullPathname( + sqlite3_vfs *pVfs, + const char *zPath, + int nOut, + char *zOut +){ + sqlite3_snprintf(nOut, zOut, "%s", zPath); + return SQLITE_OK; +} + +/* +** Open the dynamic library located at zPath and return a handle. +*/ +static void *memdbDlOpen(sqlite3_vfs *pVfs, const char *zPath){ + return ORIGVFS(pVfs)->xDlOpen(ORIGVFS(pVfs), zPath); +} + +/* +** Populate the buffer zErrMsg (size nByte bytes) with a human readable +** utf-8 string describing the most recent error encountered associated +** with dynamic libraries. +*/ +static void memdbDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){ + ORIGVFS(pVfs)->xDlError(ORIGVFS(pVfs), nByte, zErrMsg); +} + +/* +** Return a pointer to the symbol zSymbol in the dynamic library pHandle. +*/ +static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char *zSym))(void){ + return ORIGVFS(pVfs)->xDlSym(ORIGVFS(pVfs), p, zSym); +} + +/* +** Close the dynamic library handle pHandle. +*/ +static void memdbDlClose(sqlite3_vfs *pVfs, void *pHandle){ + ORIGVFS(pVfs)->xDlClose(ORIGVFS(pVfs), pHandle); +} + +/* +** Populate the buffer pointed to by zBufOut with nByte bytes of +** random data. +*/ +static int memdbRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){ + return ORIGVFS(pVfs)->xRandomness(ORIGVFS(pVfs), nByte, zBufOut); +} + +/* +** Sleep for nMicro microseconds. Return the number of microseconds +** actually slept. +*/ +static int memdbSleep(sqlite3_vfs *pVfs, int nMicro){ + return ORIGVFS(pVfs)->xSleep(ORIGVFS(pVfs), nMicro); +} + +#if 0 /* Never used. Modern cores only call xCurrentTimeInt64() */ +/* +** Return the current time as a Julian Day number in *pTimeOut. +*/ +static int memdbCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){ + return ORIGVFS(pVfs)->xCurrentTime(ORIGVFS(pVfs), pTimeOut); +} +#endif + +static int memdbGetLastError(sqlite3_vfs *pVfs, int a, char *b){ + return ORIGVFS(pVfs)->xGetLastError(ORIGVFS(pVfs), a, b); +} +static int memdbCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *p){ + return ORIGVFS(pVfs)->xCurrentTimeInt64(ORIGVFS(pVfs), p); +} + +/* +** Translate a database connection pointer and schema name into a +** MemFile pointer. +*/ +static MemFile *memdbFromDbSchema(sqlite3 *db, const char *zSchema){ + MemFile *p = 0; + int rc = sqlite3_file_control(db, zSchema, SQLITE_FCNTL_FILE_POINTER, &p); + if( rc ) return 0; + if( p->base.pMethods!=&memdb_io_methods ) return 0; + return p; +} + +/* +** Return the serialization of a database +*/ +SQLITE_API unsigned char *sqlite3_serialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which database within the connection */ + sqlite3_int64 *piSize, /* Write size here, if not NULL */ + unsigned int mFlags /* Maybe SQLITE_SERIALIZE_NOCOPY */ +){ + MemFile *p; + int iDb; + Btree *pBt; + sqlite3_int64 sz; + int szPage = 0; + sqlite3_stmt *pStmt = 0; + unsigned char *pOut; + char *zSql; + int rc; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + + if( zSchema==0 ) zSchema = db->aDb[0].zDbSName; + p = memdbFromDbSchema(db, zSchema); + iDb = sqlite3FindDbName(db, zSchema); + if( piSize ) *piSize = -1; + if( iDb<0 ) return 0; + if( p ){ + if( piSize ) *piSize = p->sz; + if( mFlags & SQLITE_SERIALIZE_NOCOPY ){ + pOut = p->aData; + }else{ + pOut = sqlite3_malloc64( p->sz ); + if( pOut ) memcpy(pOut, p->aData, p->sz); + } + return pOut; + } + pBt = db->aDb[iDb].pBt; + if( pBt==0 ) return 0; + szPage = sqlite3BtreeGetPageSize(pBt); + zSql = sqlite3_mprintf("PRAGMA \"%w\".page_count", zSchema); + rc = zSql ? sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0) : SQLITE_NOMEM; + sqlite3_free(zSql); + if( rc ) return 0; + rc = sqlite3_step(pStmt); + if( rc!=SQLITE_ROW ){ + pOut = 0; + }else{ + sz = sqlite3_column_int64(pStmt, 0)*szPage; + if( piSize ) *piSize = sz; + if( mFlags & SQLITE_SERIALIZE_NOCOPY ){ + pOut = 0; + }else{ + pOut = sqlite3_malloc64( sz ); + if( pOut ){ + int nPage = sqlite3_column_int(pStmt, 0); + Pager *pPager = sqlite3BtreePager(pBt); + int pgno; + for(pgno=1; pgno<=nPage; pgno++){ + DbPage *pPage = 0; + unsigned char *pTo = pOut + szPage*(sqlite3_int64)(pgno-1); + rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pPage, 0); + if( rc==SQLITE_OK ){ + memcpy(pTo, sqlite3PagerGetData(pPage), szPage); + }else{ + memset(pTo, 0, szPage); + } + sqlite3PagerUnref(pPage); + } + } + } + } + sqlite3_finalize(pStmt); + return pOut; +} + +/* Convert zSchema to a MemDB and initialize its content. +*/ +SQLITE_API int sqlite3_deserialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to reopen with the deserialization */ + unsigned char *pData, /* The serialized database content */ + sqlite3_int64 szDb, /* Number bytes in the deserialization */ + sqlite3_int64 szBuf, /* Total size of buffer pData[] */ + unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */ +){ + MemFile *p; + char *zSql; + sqlite3_stmt *pStmt = 0; + int rc; + int iDb; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + if( szDb<0 ) return SQLITE_MISUSE_BKPT; + if( szBuf<0 ) return SQLITE_MISUSE_BKPT; +#endif + + sqlite3_mutex_enter(db->mutex); + if( zSchema==0 ) zSchema = db->aDb[0].zDbSName; + iDb = sqlite3FindDbName(db, zSchema); + if( iDb<0 ){ + rc = SQLITE_ERROR; + goto end_deserialize; + } + zSql = sqlite3_mprintf("ATTACH x AS %Q", zSchema); + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); + if( rc ) goto end_deserialize; + db->init.iDb = (u8)iDb; + db->init.reopenMemdb = 1; + rc = sqlite3_step(pStmt); + db->init.reopenMemdb = 0; + if( rc!=SQLITE_DONE ){ + rc = SQLITE_ERROR; + goto end_deserialize; + } + p = memdbFromDbSchema(db, zSchema); + if( p==0 ){ + rc = SQLITE_ERROR; + }else{ + p->aData = pData; + p->sz = szDb; + p->szMax = szBuf; + p->mFlags = mFlags; + rc = SQLITE_OK; + } + +end_deserialize: + sqlite3_finalize(pStmt); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +/* +** This routine is called when the extension is loaded. +** Register the new VFS. +*/ +SQLITE_PRIVATE int sqlite3MemdbInit(void){ + sqlite3_vfs *pLower = sqlite3_vfs_find(0); + int sz = pLower->szOsFile; + memdb_vfs.pAppData = pLower; + /* In all known configurations of SQLite, the size of a default + ** sqlite3_file is greater than the size of a memdb sqlite3_file. + ** Should that ever change, remove the following NEVER() */ + if( NEVER(szeCreate = 2; } } - pPage->pDirtyNext = 0; - pPage->pDirtyPrev = 0; } if( addRemove & PCACHE_DIRTYLIST_ADD ){ - assert( pPage->pDirtyNext==0 && pPage->pDirtyPrev==0 && p->pDirty!=pPage ); - + pPage->pDirtyPrev = 0; pPage->pDirtyNext = p->pDirty; if( pPage->pDirtyNext ){ assert( pPage->pDirtyNext->pDirtyPrev==0 ); @@ -45091,7 +47980,7 @@ sqlite3_log(SQLITE_FULL, "spill page %d making room for %d - cache used: %d/%d", pPg->pgno, pgno, - sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache), + sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache), numberOfCachePages(pCache)); #endif pcacheTrace(("%p.SPILL %d\n",pCache,pPg->pgno)); @@ -45170,11 +48059,7 @@ if( (--p->nRef)==0 ){ if( p->flags&PGHDR_CLEAN ){ pcacheUnpin(p); - }else if( p->pDirtyPrev!=0 ){ /*OPTIMIZATION-IF-FALSE*/ - /* Move the page to the head of the dirty list. If p->pDirtyPrev==0, - ** then page p is already at the head of the dirty list and the - ** following call would be a no-op. Hence the OPTIMIZATION-IF-FALSE - ** tag above. */ + }else{ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); } } @@ -45230,16 +48115,15 @@ */ SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr *p){ assert( sqlite3PcachePageSanity(p) ); - if( ALWAYS((p->flags & PGHDR_DIRTY)!=0) ){ - assert( (p->flags & PGHDR_CLEAN)==0 ); - pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); - p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC|PGHDR_WRITEABLE); - p->flags |= PGHDR_CLEAN; - pcacheTrace(("%p.CLEAN %d\n",p->pCache,p->pgno)); - assert( sqlite3PcachePageSanity(p) ); - if( p->nRef==0 ){ - pcacheUnpin(p); - } + assert( (p->flags & PGHDR_DIRTY)!=0 ); + assert( (p->flags & PGHDR_CLEAN)==0 ); + pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); + p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC|PGHDR_WRITEABLE); + p->flags |= PGHDR_CLEAN; + pcacheTrace(("%p.CLEAN %d\n",p->pCache,p->pgno)); + assert( sqlite3PcachePageSanity(p) ); + if( p->nRef==0 ){ + pcacheUnpin(p); } } @@ -45521,6 +48405,15 @@ return nCache ? (int)(((i64)nDirty * 100) / nCache) : 0; } +#ifdef SQLITE_DIRECT_OVERFLOW_READ +/* +** Return true if there are one or more dirty pages in the cache. Else false. +*/ +SQLITE_PRIVATE int sqlite3PCacheIsDirty(PCache *pCache){ + return (pCache->pDirty!=0); +} +#endif + #if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG) /* ** For all dirty pages currently in the cache, invoke the specified @@ -45635,7 +48528,6 @@ struct PgHdr1 { sqlite3_pcache_page page; /* Base class. Must be first. pBuf & pExtra */ unsigned int iKey; /* Key value (page number) */ - u8 isPinned; /* Page in use, not on the LRU list */ u8 isBulkLocal; /* This page from bulk local storage */ u8 isAnchor; /* This is the PGroup.lru element */ PgHdr1 *pNext; /* Next in hash table chain */ @@ -45644,6 +48536,13 @@ PgHdr1 *pLruPrev; /* Previous in LRU list of unpinned pages */ }; +/* +** A page is pinned if it is not on the LRU list. To be "pinned" means +** that the page is in active use and must not be deallocated. +*/ +#define PAGE_IS_PINNED(p) ((p)->pLruNext==0) +#define PAGE_IS_UNPINNED(p) ((p)->pLruNext!=0) + /* Each page cache (or PCache) belongs to a PGroup. A PGroup is a set ** of one or more PCaches that are able to recycle each other's unpinned ** pages when they are under memory pressure. A PGroup is an instance of @@ -45671,7 +48570,7 @@ unsigned int nMaxPage; /* Sum of nMax for purgeable caches */ unsigned int nMinPage; /* Sum of nMin for purgeable caches */ unsigned int mxPinned; /* nMaxpage + 10 - nMinPage */ - unsigned int nCurrentPage; /* Number of purgeable pages allocated */ + unsigned int nPurgeable; /* Number of purgeable pages allocated */ PgHdr1 lru; /* The beginning and end of the LRU list */ }; @@ -45685,11 +48584,13 @@ */ struct PCache1 { /* Cache configuration parameters. Page size (szPage) and the purgeable - ** flag (bPurgeable) are set when the cache is created. nMax may be + ** flag (bPurgeable) and the pnPurgeable pointer are all set when the + ** cache is created and are never changed thereafter. nMax may be ** modified at any time by a call to the pcache1Cachesize() method. ** The PGroup mutex must be held when accessing nMax. */ PGroup *pGroup; /* PGroup this cache belongs to */ + unsigned int *pnPurgeable; /* Pointer to pGroup->nPurgeable */ int szPage; /* Size of database content section */ int szExtra; /* sizeof(MemPage)+sizeof(PgHdr) */ int szAlloc; /* Total size of one pcache line */ @@ -45784,6 +48685,7 @@ if( pcache1.isInit ){ PgFreeslot *p; if( pBuf==0 ) sz = n = 0; + if( n==0 ) sz = 0; sz = ROUNDDOWN8(sz); pcache1.szSlot = sz; pcache1.nSlot = pcache1.nFreeSlot = n; @@ -45976,9 +48878,7 @@ p->isBulkLocal = 0; p->isAnchor = 0; } - if( pCache->bPurgeable ){ - pCache->pGroup->nCurrentPage++; - } + (*pCache->pnPurgeable)++; return p; } @@ -45999,9 +48899,7 @@ sqlite3_free(p); #endif } - if( pCache->bPurgeable ){ - pCache->pGroup->nCurrentPage--; - } + (*pCache->pnPurgeable)--; } /* @@ -46096,22 +48994,18 @@ ** The PGroup mutex must be held when this function is called. */ static PgHdr1 *pcache1PinPage(PgHdr1 *pPage){ - PCache1 *pCache; - assert( pPage!=0 ); - assert( pPage->isPinned==0 ); - pCache = pPage->pCache; + assert( PAGE_IS_UNPINNED(pPage) ); assert( pPage->pLruNext ); assert( pPage->pLruPrev ); - assert( sqlite3_mutex_held(pCache->pGroup->mutex) ); + assert( sqlite3_mutex_held(pPage->pCache->pGroup->mutex) ); pPage->pLruPrev->pLruNext = pPage->pLruNext; pPage->pLruNext->pLruPrev = pPage->pLruPrev; pPage->pLruNext = 0; pPage->pLruPrev = 0; - pPage->isPinned = 1; assert( pPage->isAnchor==0 ); - assert( pCache->pGroup->lru.isAnchor==1 ); - pCache->nRecyclable--; + assert( pPage->pCache->pGroup->lru.isAnchor==1 ); + pPage->pCache->nRecyclable--; return pPage; } @@ -46145,11 +49039,11 @@ PGroup *pGroup = pCache->pGroup; PgHdr1 *p; assert( sqlite3_mutex_held(pGroup->mutex) ); - while( pGroup->nCurrentPage>pGroup->nMaxPage + while( pGroup->nPurgeable>pGroup->nMaxPage && (p=pGroup->lru.pLruPrev)->isAnchor==0 ){ assert( p->pCache->pGroup==pGroup ); - assert( p->isPinned==0 ); + assert( PAGE_IS_UNPINNED(p) ); pcache1PinPage(p); pcache1RemoveFromHash(p, 1); } @@ -46198,7 +49092,7 @@ if( pPage->iKey>=iLimit ){ pCache->nPage--; *pp = pPage->pNext; - if( !pPage->isPinned ) pcache1PinPage(pPage); + if( PAGE_IS_UNPINNED(pPage) ) pcache1PinPage(pPage); pcache1FreePage(pPage); }else{ pp = &pPage->pNext; @@ -46316,6 +49210,10 @@ pCache->nMin = 10; pGroup->nMinPage += pCache->nMin; pGroup->mxPinned = pGroup->nMaxPage + 10 - pGroup->nMinPage; + pCache->pnPurgeable = &pGroup->nPurgeable; + }else{ + static unsigned int dummyCurrentPage; + pCache->pnPurgeable = &dummyCurrentPage; } pcache1LeaveMutex(pGroup); if( pCache->nHash==0 ){ @@ -46417,7 +49315,7 @@ ){ PCache1 *pOther; pPage = pGroup->lru.pLruPrev; - assert( pPage->isPinned==0 ); + assert( PAGE_IS_UNPINNED(pPage) ); pcache1RemoveFromHash(pPage, 0); pcache1PinPage(pPage); pOther = pPage->pCache; @@ -46425,7 +49323,7 @@ pcache1FreePage(pPage); pPage = 0; }else{ - pGroup->nCurrentPage -= (pOther->bPurgeable - pCache->bPurgeable); + pGroup->nPurgeable -= (pOther->bPurgeable - pCache->bPurgeable); } } @@ -46444,7 +49342,6 @@ pPage->pCache = pCache; pPage->pLruPrev = 0; pPage->pLruNext = 0; - pPage->isPinned = 1; *(void **)pPage->page.pExtra = 0; pCache->apHash[h] = pPage; if( iKey>pCache->iMaxKey ){ @@ -46530,7 +49427,7 @@ ** Otherwise (page not in hash and createFlag!=0) continue with ** subsequent steps to try to create the page. */ if( pPage ){ - if( !pPage->isPinned ){ + if( PAGE_IS_UNPINNED(pPage) ){ return pcache1PinPage(pPage); }else{ return pPage; @@ -46605,9 +49502,9 @@ ** part of the PGroup LRU list. */ assert( pPage->pLruPrev==0 && pPage->pLruNext==0 ); - assert( pPage->isPinned==1 ); + assert( PAGE_IS_PINNED(pPage) ); - if( reuseUnlikely || pGroup->nCurrentPage>pGroup->nMaxPage ){ + if( reuseUnlikely || pGroup->nPurgeable>pGroup->nMaxPage ){ pcache1RemoveFromHash(pPage, 1); }else{ /* Add the page to the PGroup LRU list. */ @@ -46616,7 +49513,6 @@ (pPage->pLruNext = *ppFirst)->pLruPrev = pPage; *ppFirst = pPage; pCache->nRecyclable++; - pPage->isPinned = 0; } pcache1LeaveMutex(pCache->pGroup); @@ -46760,7 +49656,7 @@ #ifdef SQLITE_PCACHE_SEPARATE_HEADER nFree += sqlite3MemSize(p); #endif - assert( p->isPinned==0 ); + assert( PAGE_IS_UNPINNED(p) ); pcache1PinPage(p); pcache1RemoveFromHash(p, 1); } @@ -46784,10 +49680,10 @@ PgHdr1 *p; int nRecyclable = 0; for(p=pcache1.grp.lru.pLruNext; p && !p->isAnchor; p=p->pLruNext){ - assert( p->isPinned==0 ); + assert( PAGE_IS_UNPINNED(p) ); nRecyclable++; } - *pnCurrent = pcache1.grp.nCurrentPage; + *pnCurrent = pcache1.grp.nPurgeable; *pnMax = (int)pcache1.grp.nMaxPage; *pnMin = (int)pcache1.grp.nMinPage; *pnRecyclable = nRecyclable; @@ -46922,30 +49818,23 @@ #define ROWSET_NEXT 0x02 /* True if sqlite3RowSetNext() has been called */ /* -** Turn bulk memory into a RowSet object. N bytes of memory -** are available at pSpace. The db pointer is used as a memory context -** for any subsequent allocations that need to occur. -** Return a pointer to the new RowSet object. -** -** It must be the case that N is sufficient to make a Rowset. If not -** an assertion fault occurs. -** -** If N is larger than the minimum, use the surplus as an initial -** allocation of entries available to be filled. +** Allocate a RowSet object. Return NULL if a memory allocation +** error occurs. */ -SQLITE_PRIVATE RowSet *sqlite3RowSetInit(sqlite3 *db, void *pSpace, unsigned int N){ - RowSet *p; - assert( N >= ROUND8(sizeof(*p)) ); - p = pSpace; - p->pChunk = 0; - p->db = db; - p->pEntry = 0; - p->pLast = 0; - p->pForest = 0; - p->pFresh = (struct RowSetEntry*)(ROUND8(sizeof(*p)) + (char*)p); - p->nFresh = (u16)((N - ROUND8(sizeof(*p)))/sizeof(struct RowSetEntry)); - p->rsFlags = ROWSET_SORTED; - p->iBatch = 0; +SQLITE_PRIVATE RowSet *sqlite3RowSetInit(sqlite3 *db){ + RowSet *p = sqlite3DbMallocRawNN(db, sizeof(*p)); + if( p ){ + int N = sqlite3DbMallocSize(db, p); + p->pChunk = 0; + p->db = db; + p->pEntry = 0; + p->pLast = 0; + p->pForest = 0; + p->pFresh = (struct RowSetEntry*)(ROUND8(sizeof(*p)) + (char*)p); + p->nFresh = (u16)((N - ROUND8(sizeof(*p)))/sizeof(struct RowSetEntry)); + p->rsFlags = ROWSET_SORTED; + p->iBatch = 0; + } return p; } @@ -46954,7 +49843,8 @@ ** the RowSet has allocated over its lifetime. This routine is ** the destructor for the RowSet. */ -SQLITE_PRIVATE void sqlite3RowSetClear(RowSet *p){ +SQLITE_PRIVATE void sqlite3RowSetClear(void *pArg){ + RowSet *p = (RowSet*)pArg; struct RowSetChunk *pChunk, *pNextChunk; for(pChunk=p->pChunk; pChunk; pChunk = pNextChunk){ pNextChunk = pChunk->pNextChunk; @@ -46969,6 +49859,16 @@ } /* +** Deallocate all chunks from a RowSet. This frees all memory that +** the RowSet has allocated over its lifetime. This routine is +** the destructor for the RowSet. +*/ +SQLITE_PRIVATE void sqlite3RowSetDelete(void *pArg){ + sqlite3RowSetClear(pArg); + sqlite3DbFree(((RowSet*)pArg)->db, pArg); +} + +/* ** Allocate a new RowSetEntry object that is associated with the ** given RowSet. Return a pointer to the new and completely uninitialized ** objected. @@ -47342,11 +50242,11 @@ /* #include "sqliteInt.h" */ -/* Additional values that can be added to the sync_flags argument of -** sqlite3WalFrames(): +/* Macros for extracting appropriate sync flags for either transaction +** commits (WAL_SYNC_FLAGS(X)) or for checkpoint ops (CKPT_SYNC_FLAGS(X)): */ -#define WAL_SYNC_TRANSACTIONS 0x20 /* Sync at the end of each transaction */ -#define SQLITE_SYNC_MASK 0x13 /* Mask off the SQLITE_SYNC_* values */ +#define WAL_SYNC_FLAGS(X) ((X)&0x03) +#define CKPT_SYNC_FLAGS(X) (((X)>>2)&0x03) #ifdef SQLITE_OMIT_WAL # define sqlite3WalOpen(x,y,z) 0 @@ -47455,6 +50355,8 @@ SQLITE_PRIVATE int sqlite3WalSnapshotGet(Wal *pWal, sqlite3_snapshot **ppSnapshot); SQLITE_PRIVATE void sqlite3WalSnapshotOpen(Wal *pWal, sqlite3_snapshot *pSnapshot); SQLITE_PRIVATE int sqlite3WalSnapshotRecover(Wal *pWal); +SQLITE_PRIVATE int sqlite3WalSnapshotCheck(Wal *pWal, sqlite3_snapshot *pSnapshot); +SQLITE_PRIVATE void sqlite3WalSnapshotUnlock(Wal *pWal); #endif #ifdef SQLITE_ENABLE_ZIPVFS @@ -47579,8 +50481,8 @@ ** associated file-descriptor is returned. FILEHANDLEID() takes an sqlite3_file ** struct as its argument. */ -#define PAGERID(p) ((int)(p->fd)) -#define FILEHANDLEID(fd) ((int)fd) +#define PAGERID(p) (SQLITE_PTR_TO_INT(p->fd)) +#define FILEHANDLEID(fd) (SQLITE_PTR_TO_INT(fd)) /* ** The Pager.eState variable stores the current 'state' of a pager. A @@ -48067,6 +50969,18 @@ ** is set to zero in all other states. In PAGER_ERROR state, Pager.errCode ** is always set to SQLITE_FULL, SQLITE_IOERR or one of the SQLITE_IOERR_XXX ** sub-codes. +** +** syncFlags, walSyncFlags +** +** syncFlags is either SQLITE_SYNC_NORMAL (0x02) or SQLITE_SYNC_FULL (0x03). +** syncFlags is used for rollback mode. walSyncFlags is used for WAL mode +** and contains the flags used to sync the checkpoint operations in the +** lower two bits, and sync flags used for transaction commits in the WAL +** file in bits 0x04 and 0x08. In other words, to get the correct sync flags +** for checkpoint operations, use (walSyncFlags&0x03) and to get the correct +** sync flags for transaction commit, use ((walSyncFlags>>2)&0x03). Note +** that with synchronous=NORMAL in WAL mode, transaction commit is not synced +** meaning that the 0x04 and 0x08 bits are both zero. */ struct Pager { sqlite3_vfs *pVfs; /* OS functions to use for IO */ @@ -48076,9 +50990,8 @@ u8 noSync; /* Do not sync the journal if true */ u8 fullSync; /* Do extra syncs of the journal for robustness */ u8 extraSync; /* sync directory after journal delete */ - u8 ckptSyncFlags; /* SYNC_NORMAL or SYNC_FULL for checkpoint */ - u8 walSyncFlags; /* SYNC_NORMAL or SYNC_FULL for wal writes */ u8 syncFlags; /* SYNC_NORMAL or SYNC_FULL otherwise */ + u8 walSyncFlags; /* See description above */ u8 tempFile; /* zFilename is a temporary or immutable file */ u8 noLock; /* Do not lock (except in WAL mode) */ u8 readOnly; /* True for a read-only database */ @@ -48139,7 +51052,7 @@ char *zJournal; /* Name of the journal file */ int (*xBusyHandler)(void*); /* Function to call when busy */ void *pBusyHandlerArg; /* Context argument for xBusyHandler */ - int aStat[3]; /* Total cache hits, misses and writes */ + int aStat[4]; /* Total cache hits, misses, writes, spills */ #ifdef SQLITE_TEST int nRead; /* Database pages read */ #endif @@ -48167,6 +51080,7 @@ #define PAGER_STAT_HIT 0 #define PAGER_STAT_MISS 1 #define PAGER_STAT_WRITE 2 +#define PAGER_STAT_SPILL 3 /* ** The following global variables hold counters used for @@ -48264,19 +51178,30 @@ */ #define isOpen(pFd) ((pFd)->pMethods!=0) +#ifdef SQLITE_DIRECT_OVERFLOW_READ /* -** Return true if this pager uses a write-ahead log to read page pgno. -** Return false if the pager reads pgno directly from the database. +** Return true if page pgno can be read directly from the database file +** by the b-tree layer. This is the case if: +** +** * the database file is open, +** * there are no dirty pages in the cache, and +** * the desired page is not currently in the wal file. */ -#if !defined(SQLITE_OMIT_WAL) && defined(SQLITE_DIRECT_OVERFLOW_READ) -SQLITE_PRIVATE int sqlite3PagerUseWal(Pager *pPager, Pgno pgno){ - u32 iRead = 0; - int rc; - if( pPager->pWal==0 ) return 0; - rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iRead); - return rc || iRead; +SQLITE_PRIVATE int sqlite3PagerDirectReadOk(Pager *pPager, Pgno pgno){ + if( pPager->fd->pMethods==0 ) return 0; + if( sqlite3PCacheIsDirty(pPager->pPCache) ) return 0; +#ifndef SQLITE_OMIT_WAL + if( pPager->pWal ){ + u32 iRead = 0; + int rc; + rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iRead); + return (rc==SQLITE_OK && iRead==0); + } +#endif + return 1; } #endif + #ifndef SQLITE_OMIT_WAL # define pagerUseWal(x) ((x)->pWal!=0) #else @@ -48398,6 +51323,7 @@ assert( isOpen(p->jfd) || p->journalMode==PAGER_JOURNALMODE_OFF || p->journalMode==PAGER_JOURNALMODE_WAL + || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC) ); assert( pPager->dbOrigSize<=pPager->dbHintSize ); break; @@ -48409,6 +51335,7 @@ assert( isOpen(p->jfd) || p->journalMode==PAGER_JOURNALMODE_OFF || p->journalMode==PAGER_JOURNALMODE_WAL + || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC) ); break; @@ -48434,8 +51361,12 @@ ** to "print *pPager" in gdb: ** ** (gdb) printf "%s", print_pager_state(pPager) +** +** This routine has external linkage in order to suppress compiler warnings +** about an unused function. It is enclosed within SQLITE_DEBUG and so does +** not appear in normal builds. */ -static char *print_pager_state(Pager *p){ +char *print_pager_state(Pager *p){ static char zRet[1024]; sqlite3_snprintf(1024, zRet, @@ -48619,8 +51550,9 @@ } /* -** This function determines whether or not the atomic-write optimization -** can be used with this pager. The optimization can be used if: +** This function determines whether or not the atomic-write or +** atomic-batch-write optimizations can be used with this pager. The +** atomic-write optimization can be used if: ** ** (a) the value returned by OsDeviceCharacteristics() indicates that ** a database page may be written atomically, and @@ -48627,27 +51559,39 @@ ** (b) the value returned by OsSectorSize() is less than or equal ** to the page size. ** -** The optimization is also always enabled for temporary files. It is -** an error to call this function if pPager is opened on an in-memory -** database. +** If it can be used, then the value returned is the size of the journal +** file when it contains rollback data for exactly one page. ** -** If the optimization cannot be used, 0 is returned. If it can be used, -** then the value returned is the size of the journal file when it -** contains rollback data for exactly one page. +** The atomic-batch-write optimization can be used if OsDeviceCharacteristics() +** returns a value with the SQLITE_IOCAP_BATCH_ATOMIC bit set. -1 is +** returned in this case. +** +** If neither optimization can be used, 0 is returned. */ -#ifdef SQLITE_ENABLE_ATOMIC_WRITE static int jrnlBufferSize(Pager *pPager){ assert( !MEMDB ); - if( !pPager->tempFile ){ - int dc; /* Device characteristics */ - int nSector; /* Sector size */ - int szPage; /* Page size */ - assert( isOpen(pPager->fd) ); - dc = sqlite3OsDeviceCharacteristics(pPager->fd); - nSector = pPager->sectorSize; - szPage = pPager->pageSize; +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + int dc; /* Device characteristics */ + assert( isOpen(pPager->fd) ); + dc = sqlite3OsDeviceCharacteristics(pPager->fd); +#else + UNUSED_PARAMETER(pPager); +#endif + +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + if( pPager->dbSize>0 && (dc&SQLITE_IOCAP_BATCH_ATOMIC) ){ + return -1; + } +#endif + +#ifdef SQLITE_ENABLE_ATOMIC_WRITE + { + int nSector = pPager->sectorSize; + int szPage = pPager->pageSize; + assert(SQLITE_IOCAP_ATOMIC512==(512>>8)); assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8)); if( 0==(dc&(SQLITE_IOCAP_ATOMIC|(szPage>>8)) || nSector>szPage) ){ @@ -48656,11 +51600,11 @@ } return JOURNAL_HDR_SZ(pPager) + JOURNAL_PG_SZ(pPager); -} -#else -# define jrnlBufferSize(x) 0 #endif + return 0; +} + /* ** If SQLITE_CHECK_PAGES is defined then we do some sanity checking ** on the cache using a hash function. This is used for testing @@ -48742,6 +51686,7 @@ || szJ<16 || SQLITE_OK!=(rc = read32bits(pJrnl, szJ-16, &len)) || len>=nMaster + || len>szJ-16 || len==0 || SQLITE_OK!=(rc = read32bits(pJrnl, szJ-12, &cksum)) || SQLITE_OK!=(rc = sqlite3OsRead(pJrnl, aMagic, 8, szJ-8)) @@ -49187,7 +52132,6 @@ ** Return the pPager->iDataVersion value */ SQLITE_PRIVATE u32 sqlite3PagerDataVersion(Pager *pPager){ - assert( pPager->eState>PAGER_OPEN ); return pPager->iDataVersion; } @@ -49463,7 +52407,9 @@ } releaseAllSavepoints(pPager); - assert( isOpen(pPager->jfd) || pPager->pInJournal==0 ); + assert( isOpen(pPager->jfd) || pPager->pInJournal==0 + || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_BATCH_ATOMIC) + ); if( isOpen(pPager->jfd) ){ assert( !pagerUseWal(pPager) ); @@ -49551,7 +52497,7 @@ rc = pager_truncate(pPager, pPager->dbSize); } - if( rc==SQLITE_OK && bCommit && isOpen(pPager->fd) ){ + if( rc==SQLITE_OK && bCommit ){ rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_COMMIT_PHASETWO, 0); if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; } @@ -50231,6 +53177,7 @@ char *zMaster = 0; /* Name of master journal file if any */ int needPagerReset; /* True to reset page prior to first page rollback */ int nPlayback = 0; /* Total number of pages restored from journal */ + u32 savedPageSize = pPager->pageSize; /* Figure out how many records are in the journal. Abort early if ** the journal is empty. @@ -50360,6 +53307,9 @@ assert( 0 ); end_playback: + if( rc==SQLITE_OK ){ + rc = sqlite3PagerSetPagesize(pPager, &savedPageSize, -1); + } /* Following a rollback, the database file should be back in its original ** state prior to the start of the transaction, so invoke the ** SQLITE_FCNTL_DB_UNCHANGED file-control method to disable the @@ -50366,9 +53316,7 @@ ** assertion that the transaction counter was modified. */ #ifdef SQLITE_DEBUG - if( pPager->fd->pMethods ){ - sqlite3OsFileControlHint(pPager->fd,SQLITE_FCNTL_DB_UNCHANGED,0); - } + sqlite3OsFileControlHint(pPager->fd,SQLITE_FCNTL_DB_UNCHANGED,0); #endif /* If this playback is happening automatically as a result of an IO or @@ -50418,7 +53366,8 @@ /* -** Read the content for page pPg out of the database file and into +** Read the content for page pPg out of the database file (or out of +** the WAL if that is where the most recent copy if found) into ** pPg->pData. A shared lock or greater must be held on the database ** file before this function is called. ** @@ -50428,30 +53377,33 @@ ** If an IO error occurs, then the IO error is returned to the caller. ** Otherwise, SQLITE_OK is returned. */ -static int readDbPage(PgHdr *pPg, u32 iFrame){ +static int readDbPage(PgHdr *pPg){ Pager *pPager = pPg->pPager; /* Pager object associated with page pPg */ - Pgno pgno = pPg->pgno; /* Page number to read */ int rc = SQLITE_OK; /* Return code */ - int pgsz = pPager->pageSize; /* Number of bytes to read */ +#ifndef SQLITE_OMIT_WAL + u32 iFrame = 0; /* Frame of WAL containing pgno */ + assert( pPager->eState>=PAGER_READER && !MEMDB ); assert( isOpen(pPager->fd) ); -#ifndef SQLITE_OMIT_WAL + if( pagerUseWal(pPager) ){ + rc = sqlite3WalFindFrame(pPager->pWal, pPg->pgno, &iFrame); + if( rc ) return rc; + } if( iFrame ){ - /* Try to pull the page from the write-ahead log. */ - rc = sqlite3WalReadFrame(pPager->pWal, iFrame, pgsz, pPg->pData); + rc = sqlite3WalReadFrame(pPager->pWal, iFrame,pPager->pageSize,pPg->pData); }else #endif { - i64 iOffset = (pgno-1)*(i64)pPager->pageSize; - rc = sqlite3OsRead(pPager->fd, pPg->pData, pgsz, iOffset); + i64 iOffset = (pPg->pgno-1)*(i64)pPager->pageSize; + rc = sqlite3OsRead(pPager->fd, pPg->pData, pPager->pageSize, iOffset); if( rc==SQLITE_IOERR_SHORT_READ ){ rc = SQLITE_OK; } } - if( pgno==1 ){ + if( pPg->pgno==1 ){ if( rc ){ /* If the read is unsuccessful, set the dbFileVers[] to something ** that will never be a valid file version. dbFileVers[] is a copy @@ -50471,13 +53423,13 @@ memcpy(&pPager->dbFileVers, dbFileVers, sizeof(pPager->dbFileVers)); } } - CODEC1(pPager, pPg->pData, pgno, 3, rc = SQLITE_NOMEM_BKPT); + CODEC1(pPager, pPg->pData, pPg->pgno, 3, rc = SQLITE_NOMEM_BKPT); PAGER_INCR(sqlite3_pager_readdb_count); PAGER_INCR(pPager->nRead); - IOTRACE(("PGIN %p %d\n", pPager, pgno)); + IOTRACE(("PGIN %p %d\n", pPager, pPg->pgno)); PAGERTRACE(("FETCH %d page %d hash(%08x)\n", - PAGERID(pPager), pgno, pager_pagehash(pPg))); + PAGERID(pPager), pPg->pgno, pager_pagehash(pPg))); return rc; } @@ -50528,12 +53480,8 @@ if( sqlite3PcachePageRefcount(pPg)==1 ){ sqlite3PcacheDrop(pPg); }else{ - u32 iFrame = 0; - rc = sqlite3WalFindFrame(pPager->pWal, pPg->pgno, &iFrame); + rc = readDbPage(pPg); if( rc==SQLITE_OK ){ - rc = readDbPage(pPg, iFrame); - } - if( rc==SQLITE_OK ){ pPager->xReiniter(pPg); } sqlite3PagerUnrefNotNull(pPg); @@ -51038,21 +53986,18 @@ } if( pPager->noSync ){ pPager->syncFlags = 0; - pPager->ckptSyncFlags = 0; }else if( pgFlags & PAGER_FULLFSYNC ){ pPager->syncFlags = SQLITE_SYNC_FULL; - pPager->ckptSyncFlags = SQLITE_SYNC_FULL; - }else if( pgFlags & PAGER_CKPT_FULLFSYNC ){ - pPager->syncFlags = SQLITE_SYNC_NORMAL; - pPager->ckptSyncFlags = SQLITE_SYNC_FULL; }else{ pPager->syncFlags = SQLITE_SYNC_NORMAL; - pPager->ckptSyncFlags = SQLITE_SYNC_NORMAL; } - pPager->walSyncFlags = pPager->syncFlags; + pPager->walSyncFlags = (pPager->syncFlags<<2); if( pPager->fullSync ){ - pPager->walSyncFlags |= WAL_SYNC_TRANSACTIONS; + pPager->walSyncFlags |= pPager->syncFlags; } + if( (pgFlags & PAGER_CKPT_FULLFSYNC) && !pPager->noSync ){ + pPager->walSyncFlags |= (SQLITE_SYNC_FULL<<2); + } if( pgFlags & PAGER_CACHESPILL ){ pPager->doNotSpill &= ~SPILLFLAG_OFF; }else{ @@ -51124,20 +54069,18 @@ ** retried. If it returns zero, then the SQLITE_BUSY error is ** returned to the caller of the pager API function. */ -SQLITE_PRIVATE void sqlite3PagerSetBusyhandler( +SQLITE_PRIVATE void sqlite3PagerSetBusyHandler( Pager *pPager, /* Pager object */ int (*xBusyHandler)(void *), /* Pointer to busy-handler function */ void *pBusyHandlerArg /* Argument to pass to xBusyHandler */ ){ + void **ap; pPager->xBusyHandler = xBusyHandler; pPager->pBusyHandlerArg = pBusyHandlerArg; - - if( isOpen(pPager->fd) ){ - void **ap = (void **)&pPager->xBusyHandler; - assert( ((int(*)(void *))(ap[0]))==xBusyHandler ); - assert( ap[1]==pBusyHandlerArg ); - sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap); - } + ap = (void **)&pPager->xBusyHandler; + assert( ((int(*)(void *))(ap[0]))==xBusyHandler ); + assert( ap[1]==pBusyHandlerArg ); + sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap); } /* @@ -51523,7 +54466,31 @@ } } +/* Verify that the database file has not be deleted or renamed out from +** under the pager. Return SQLITE_OK if the database is still where it ought +** to be on disk. Return non-zero (SQLITE_READONLY_DBMOVED or some other error +** code from sqlite3OsAccess()) if the database has gone missing. +*/ +static int databaseIsUnmoved(Pager *pPager){ + int bHasMoved = 0; + int rc; + if( pPager->tempFile ) return SQLITE_OK; + if( pPager->dbSize==0 ) return SQLITE_OK; + assert( pPager->zFilename && pPager->zFilename[0] ); + rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_HAS_MOVED, &bHasMoved); + if( rc==SQLITE_NOTFOUND ){ + /* If the HAS_MOVED file-control is unimplemented, assume that the file + ** has not been moved. That is the historical behavior of SQLite: prior to + ** version 3.8.3, it never checked */ + rc = SQLITE_OK; + }else if( rc==SQLITE_OK && bHasMoved ){ + rc = SQLITE_READONLY_DBMOVED; + } + return rc; +} + + /* ** Shutdown the page cache. Free all memory and close all files. ** @@ -51539,8 +54506,7 @@ ** to the caller. */ SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3 *db){ - u8 *pTmp = (u8 *)pPager->pTmpSpace; - + u8 *pTmp = (u8*)pPager->pTmpSpace; assert( db || pagerUseWal(pPager)==0 ); assert( assert_pager_state(pPager) ); disable_simulated_io_errors(); @@ -51549,11 +54515,17 @@ /* pPager->errCode = 0; */ pPager->exclusiveMode = 0; #ifndef SQLITE_OMIT_WAL - assert( db || pPager->pWal==0 ); - sqlite3WalClose(pPager->pWal, db, pPager->ckptSyncFlags, pPager->pageSize, - (db && (db->flags & SQLITE_NoCkptOnClose) ? 0 : pTmp) - ); - pPager->pWal = 0; + { + u8 *a = 0; + assert( db || pPager->pWal==0 ); + if( db && 0==(db->flags & SQLITE_NoCkptOnClose) + && SQLITE_OK==databaseIsUnmoved(pPager) + ){ + a = pTmp; + } + sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags, pPager->pageSize,a); + pPager->pWal = 0; + } #endif pager_reset(pPager); if( MEMDB ){ @@ -52010,6 +54982,7 @@ return SQLITE_OK; } + pPager->aStat[PAGER_STAT_SPILL]++; pPg->pDirty = 0; if( pagerUseWal(pPager) ){ /* Write a single frame for this page to the log. */ @@ -52018,6 +54991,13 @@ rc = pagerWalFrames(pPager, pPg, 0, 0); } }else{ + +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + if( pPager->tempFile==0 ){ + rc = sqlite3JournalCreate(pPager->jfd); + if( rc!=SQLITE_OK ) return pager_error(pPager, rc); + } +#endif /* Sync the journal file if required. */ if( pPg->flags&PGHDR_NEED_SYNC @@ -52108,6 +55088,11 @@ int rc = SQLITE_OK; /* Return code */ int tempFile = 0; /* True for temp files (incl. in-memory files) */ int memDb = 0; /* True if this is an in-memory file */ +#ifdef SQLITE_ENABLE_DESERIALIZE + int memJM = 0; /* Memory journal mode */ +#else +# define memJM 0 +#endif int readOnly = 0; /* True if this is a read-only file */ int journalFileSize; /* Bytes to allocate for each journal fd */ char *zPathname = 0; /* Full path to database file */ @@ -52235,7 +55220,10 @@ int fout = 0; /* VFS flags returned by xOpen() */ rc = sqlite3OsOpen(pVfs, pPager->zFilename, pPager->fd, vfsFlags, &fout); assert( !memDb ); - readOnly = (fout&SQLITE_OPEN_READONLY); +#ifdef SQLITE_ENABLE_DESERIALIZE + memJM = (fout&SQLITE_OPEN_MEMORY)!=0; +#endif + readOnly = (fout&SQLITE_OPEN_READONLY)!=0; /* If the file was successfully opened for read/write access, ** choose a default page size in case we have to create the @@ -52351,13 +55339,11 @@ assert( pPager->extraSync==0 ); assert( pPager->syncFlags==0 ); assert( pPager->walSyncFlags==0 ); - assert( pPager->ckptSyncFlags==0 ); }else{ pPager->fullSync = 1; pPager->extraSync = 0; pPager->syncFlags = SQLITE_SYNC_NORMAL; - pPager->walSyncFlags = SQLITE_SYNC_NORMAL | WAL_SYNC_TRANSACTIONS; - pPager->ckptSyncFlags = SQLITE_SYNC_NORMAL; + pPager->walSyncFlags = SQLITE_SYNC_NORMAL | (SQLITE_SYNC_NORMAL<<2); } /* pPager->pFirst = 0; */ /* pPager->pFirstSynced = 0; */ @@ -52368,7 +55354,7 @@ setSectorSize(pPager); if( !useJournal ){ pPager->journalMode = PAGER_JOURNALMODE_OFF; - }else if( memDb ){ + }else if( memDb || memJM ){ pPager->journalMode = PAGER_JOURNALMODE_MEMORY; } /* pPager->xBusyHandler = 0; */ @@ -52383,31 +55369,7 @@ } -/* Verify that the database file has not be deleted or renamed out from -** under the pager. Return SQLITE_OK if the database is still were it ought -** to be on disk. Return non-zero (SQLITE_READONLY_DBMOVED or some other error -** code from sqlite3OsAccess()) if the database has gone missing. -*/ -static int databaseIsUnmoved(Pager *pPager){ - int bHasMoved = 0; - int rc; - if( pPager->tempFile ) return SQLITE_OK; - if( pPager->dbSize==0 ) return SQLITE_OK; - assert( pPager->zFilename && pPager->zFilename[0] ); - rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_HAS_MOVED, &bHasMoved); - if( rc==SQLITE_NOTFOUND ){ - /* If the HAS_MOVED file-control is unimplemented, assume that the file - ** has not been moved. That is the historical behavior of SQLite: prior to - ** version 3.8.3, it never checked */ - rc = SQLITE_OK; - }else if( rc==SQLITE_OK && bHasMoved ){ - rc = SQLITE_READONLY_DBMOVED; - } - return rc; -} - - /* ** This function is called after transitioning from PAGER_UNLOCK to ** PAGER_SHARED state. It tests if there is a hot journal present in @@ -52777,7 +55739,8 @@ ** nothing to rollback, so this routine is a no-op. */ static void pagerUnlockIfUnused(Pager *pPager){ - if( pPager->nMmapOut==0 && (sqlite3PcacheRefCount(pPager->pPCache)==0) ){ + if( sqlite3PcacheRefCount(pPager->pPCache)==0 ){ + assert( pPager->nMmapOut==0 ); /* because page1 is never memory mapped */ pagerUnlockAndRollback(pPager); } } @@ -52918,14 +55881,9 @@ memset(pPg->pData, 0, pPager->pageSize); IOTRACE(("ZERO %p %d\n", pPager, pgno)); }else{ - u32 iFrame = 0; /* Frame to read from WAL file */ - if( pagerUseWal(pPager) ){ - rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame); - if( rc!=SQLITE_OK ) goto pager_acquire_err; - } assert( pPg->pPager==pPager ); pPager->aStat[PAGER_STAT_MISS]++; - rc = readDbPage(pPg, iFrame); + rc = readDbPage(pPg); if( rc!=SQLITE_OK ){ goto pager_acquire_err; } @@ -52999,7 +55957,7 @@ } if( pPg==0 ){ rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg); - }else{ + }else{ sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1)*pPager->pageSize, pData); } if( pPg ){ @@ -53068,25 +56026,40 @@ /* ** Release a page reference. ** -** If the number of references to the page drop to zero, then the -** page is added to the LRU list. When all references to all pages -** are released, a rollback occurs and the lock on the database is -** removed. +** The sqlite3PagerUnref() and sqlite3PagerUnrefNotNull() may only be +** used if we know that the page being released is not the last page. +** The btree layer always holds page1 open until the end, so these first +** to routines can be used to release any page other than BtShared.pPage1. +** +** Use sqlite3PagerUnrefPageOne() to release page1. This latter routine +** checks the total number of outstanding pages and if the number of +** pages reaches zero it drops the database lock. */ SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage *pPg){ - Pager *pPager; + TESTONLY( Pager *pPager = pPg->pPager; ) assert( pPg!=0 ); - pPager = pPg->pPager; if( pPg->flags & PGHDR_MMAP ){ + assert( pPg->pgno!=1 ); /* Page1 is never memory mapped */ pagerReleaseMapPage(pPg); }else{ sqlite3PcacheRelease(pPg); } - pagerUnlockIfUnused(pPager); + /* Do not use this routine to release the last reference to page1 */ + assert( sqlite3PcacheRefCount(pPager->pPCache)>0 ); } SQLITE_PRIVATE void sqlite3PagerUnref(DbPage *pPg){ if( pPg ) sqlite3PagerUnrefNotNull(pPg); } +SQLITE_PRIVATE void sqlite3PagerUnrefPageOne(DbPage *pPg){ + Pager *pPager; + assert( pPg!=0 ); + assert( pPg->pgno==1 ); + assert( (pPg->flags & PGHDR_MMAP)==0 ); /* Page1 is never memory mapped */ + pPager = pPg->pPager; + sqlite3PagerResetLockTimeout(pPager); + sqlite3PcacheRelease(pPg); + pagerUnlockIfUnused(pPager); +} /* ** This function is called at the start of every write transaction. @@ -53679,12 +56652,9 @@ */ SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager, const char *zMaster){ int rc = SQLITE_OK; - - if( isOpen(pPager->fd) ){ - void *pArg = (void*)zMaster; - rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_SYNC, pArg); - if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; - } + void *pArg = (void*)zMaster; + rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_SYNC, pArg); + if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; if( rc==SQLITE_OK && !pPager->noSync ){ assert( !MEMDB ); rc = sqlite3OsSync(pPager->fd, pPager->syncFlags); @@ -53779,9 +56749,10 @@ ** backup in progress needs to be restarted. */ sqlite3BackupRestart(pPager->pBackup); }else{ + PgHdr *pList; if( pagerUseWal(pPager) ){ - PgHdr *pList = sqlite3PcacheDirtyList(pPager->pPCache); PgHdr *pPageOne = 0; + pList = sqlite3PcacheDirtyList(pPager->pPCache); if( pList==0 ){ /* Must have at least one page for the WAL commit flag. ** Ticket [2d1a5c67dfc2363e44f29d9bbd57f] 2011-05-18 */ @@ -53798,6 +56769,21 @@ sqlite3PcacheCleanAll(pPager->pPCache); } }else{ + /* The bBatch boolean is true if the batch-atomic-write commit method + ** should be used. No rollback journal is created if batch-atomic-write + ** is enabled. + */ +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + sqlite3_file *fd = pPager->fd; + int bBatch = zMaster==0 /* An SQLITE_IOCAP_BATCH_ATOMIC commit */ + && (sqlite3OsDeviceCharacteristics(fd) & SQLITE_IOCAP_BATCH_ATOMIC) + && !pPager->noSync + && sqlite3JournalIsInMemory(pPager->jfd); +#else +# define bBatch 0 +#endif + +#ifdef SQLITE_ENABLE_ATOMIC_WRITE /* The following block updates the change-counter. Exactly how it ** does this depends on whether or not the atomic-update optimization ** was enabled at compile time, and if this transaction meets the @@ -53821,33 +56807,41 @@ ** in 'direct' mode. In this case the journal file will never be ** created for this transaction. */ - #ifdef SQLITE_ENABLE_ATOMIC_WRITE - PgHdr *pPg; - assert( isOpen(pPager->jfd) - || pPager->journalMode==PAGER_JOURNALMODE_OFF - || pPager->journalMode==PAGER_JOURNALMODE_WAL - ); - if( !zMaster && isOpen(pPager->jfd) - && pPager->journalOff==jrnlBufferSize(pPager) - && pPager->dbSize>=pPager->dbOrigSize - && (0==(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty) - ){ - /* Update the db file change counter via the direct-write method. The - ** following call will modify the in-memory representation of page 1 - ** to include the updated change counter and then write page 1 - ** directly to the database file. Because of the atomic-write - ** property of the host file-system, this is safe. - */ - rc = pager_incr_changecounter(pPager, 1); - }else{ - rc = sqlite3JournalCreate(pPager->jfd); - if( rc==SQLITE_OK ){ - rc = pager_incr_changecounter(pPager, 0); + if( bBatch==0 ){ + PgHdr *pPg; + assert( isOpen(pPager->jfd) + || pPager->journalMode==PAGER_JOURNALMODE_OFF + || pPager->journalMode==PAGER_JOURNALMODE_WAL + ); + if( !zMaster && isOpen(pPager->jfd) + && pPager->journalOff==jrnlBufferSize(pPager) + && pPager->dbSize>=pPager->dbOrigSize + && (!(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty) + ){ + /* Update the db file change counter via the direct-write method. The + ** following call will modify the in-memory representation of page 1 + ** to include the updated change counter and then write page 1 + ** directly to the database file. Because of the atomic-write + ** property of the host file-system, this is safe. + */ + rc = pager_incr_changecounter(pPager, 1); + }else{ + rc = sqlite3JournalCreate(pPager->jfd); + if( rc==SQLITE_OK ){ + rc = pager_incr_changecounter(pPager, 0); + } } } - #else +#else /* SQLITE_ENABLE_ATOMIC_WRITE */ +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + if( zMaster ){ + rc = sqlite3JournalCreate(pPager->jfd); + if( rc!=SQLITE_OK ) goto commit_phase_one_exit; + assert( bBatch==0 ); + } +#endif rc = pager_incr_changecounter(pPager, 0); - #endif +#endif /* !SQLITE_ENABLE_ATOMIC_WRITE */ if( rc!=SQLITE_OK ) goto commit_phase_one_exit; /* Write the master journal name into the journal file. If a master @@ -53870,8 +56864,37 @@ */ rc = syncJournal(pPager, 0); if( rc!=SQLITE_OK ) goto commit_phase_one_exit; - - rc = pager_write_pagelist(pPager,sqlite3PcacheDirtyList(pPager->pPCache)); + + pList = sqlite3PcacheDirtyList(pPager->pPCache); +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + if( bBatch ){ + rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_BEGIN_ATOMIC_WRITE, 0); + if( rc==SQLITE_OK ){ + rc = pager_write_pagelist(pPager, pList); + if( rc==SQLITE_OK ){ + rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_COMMIT_ATOMIC_WRITE, 0); + } + if( rc!=SQLITE_OK ){ + sqlite3OsFileControlHint(fd, SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE, 0); + } + } + + if( (rc&0xFF)==SQLITE_IOERR && rc!=SQLITE_IOERR_NOMEM ){ + rc = sqlite3JournalCreate(pPager->jfd); + if( rc!=SQLITE_OK ){ + sqlite3OsClose(pPager->jfd); + goto commit_phase_one_exit; + } + bBatch = 0; + }else{ + sqlite3OsClose(pPager->jfd); + } + } +#endif /* SQLITE_ENABLE_BATCH_ATOMIC_WRITE */ + + if( bBatch==0 ){ + rc = pager_write_pagelist(pPager, pList); + } if( rc!=SQLITE_OK ){ assert( rc!=SQLITE_IOERR_BLOCKED ); goto commit_phase_one_exit; @@ -54092,8 +57115,12 @@ #endif /* -** Parameter eStat must be either SQLITE_DBSTATUS_CACHE_HIT or -** SQLITE_DBSTATUS_CACHE_MISS. Before returning, *pnVal is incremented by the +** Parameter eStat must be one of SQLITE_DBSTATUS_CACHE_HIT, _MISS, _WRITE, +** or _WRITE+1. The SQLITE_DBSTATUS_CACHE_WRITE+1 case is a translation +** of SQLITE_DBSTATUS_CACHE_SPILL. The _SPILL case is not contiguous because +** it was added later. +** +** Before returning, *pnVal is incremented by the ** current cache hit or miss count, according to the value of eStat. If the ** reset parameter is non-zero, the cache hit or miss count is zeroed before ** returning. @@ -54103,15 +57130,18 @@ assert( eStat==SQLITE_DBSTATUS_CACHE_HIT || eStat==SQLITE_DBSTATUS_CACHE_MISS || eStat==SQLITE_DBSTATUS_CACHE_WRITE + || eStat==SQLITE_DBSTATUS_CACHE_WRITE+1 ); assert( SQLITE_DBSTATUS_CACHE_HIT+1==SQLITE_DBSTATUS_CACHE_MISS ); assert( SQLITE_DBSTATUS_CACHE_HIT+2==SQLITE_DBSTATUS_CACHE_WRITE ); - assert( PAGER_STAT_HIT==0 && PAGER_STAT_MISS==1 && PAGER_STAT_WRITE==2 ); + assert( PAGER_STAT_HIT==0 && PAGER_STAT_MISS==1 + && PAGER_STAT_WRITE==2 && PAGER_STAT_SPILL==3 ); - *pnVal += pPager->aStat[eStat - SQLITE_DBSTATUS_CACHE_HIT]; + eStat -= SQLITE_DBSTATUS_CACHE_HIT; + *pnVal += pPager->aStat[eStat]; if( reset ){ - pPager->aStat[eStat - SQLITE_DBSTATUS_CACHE_HIT] = 0; + pPager->aStat[eStat] = 0; } } @@ -54315,7 +57345,17 @@ return pPager->fd; } +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT /* +** Reset the lock timeout for pager. +*/ +SQLITE_PRIVATE void sqlite3PagerResetLockTimeout(Pager *pPager){ + int x = 0; + sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_LOCK_TIMEOUT, &x); +} +#endif + +/* ** Return the file handle for the journal file (if it exists). ** This will be either the rollback journal or the WAL file. */ @@ -54345,7 +57385,11 @@ void (*xCodecFree)(void*), void *pCodec ){ - if( pPager->xCodecFree ) pPager->xCodecFree(pPager->pCodec); + if( pPager->xCodecFree ){ + pPager->xCodecFree(pPager->pCodec); + }else{ + pager_reset(pPager); + } pPager->xCodec = pPager->memDb ? 0 : xCodec; pPager->xCodecSizeChng = xCodecSizeChng; pPager->xCodecFree = xCodecFree; @@ -54606,13 +57650,6 @@ SQLITE_PRIVATE int sqlite3PagerSetJournalMode(Pager *pPager, int eMode){ u8 eOld = pPager->journalMode; /* Prior journalmode */ -#ifdef SQLITE_DEBUG - /* The print_pager_state() routine is intended to be used by the debugger - ** only. We invoke it once here to suppress a compiler warning. */ - print_pager_state(pPager); -#endif - - /* The eMode parameter is always valid */ assert( eMode==PAGER_JOURNALMODE_DELETE || eMode==PAGER_JOURNALMODE_TRUNCATE @@ -54772,9 +57809,10 @@ rc = sqlite3WalCheckpoint(pPager->pWal, db, eMode, (eMode==SQLITE_CHECKPOINT_PASSIVE ? 0 : pPager->xBusyHandler), pPager->pBusyHandlerArg, - pPager->ckptSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace, + pPager->walSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace, pnLog, pnCkpt ); + sqlite3PagerResetLockTimeout(pPager); } return rc; } @@ -54929,7 +57967,7 @@ if( rc==SQLITE_OK && pPager->pWal ){ rc = pagerExclusiveLock(pPager); if( rc==SQLITE_OK ){ - rc = sqlite3WalClose(pPager->pWal, db, pPager->ckptSyncFlags, + rc = sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags, pPager->pageSize, (u8*)pPager->pTmpSpace); pPager->pWal = 0; pagerFixMaplimit(pPager); @@ -54980,6 +58018,38 @@ } return rc; } + +/* +** The caller currently has a read transaction open on the database. +** If this is not a WAL database, SQLITE_ERROR is returned. Otherwise, +** this function takes a SHARED lock on the CHECKPOINTER slot and then +** checks if the snapshot passed as the second argument is still +** available. If so, SQLITE_OK is returned. +** +** If the snapshot is not available, SQLITE_ERROR is returned. Or, if +** the CHECKPOINTER lock cannot be obtained, SQLITE_BUSY. If any error +** occurs (any value other than SQLITE_OK is returned), the CHECKPOINTER +** lock is released before returning. +*/ +SQLITE_PRIVATE int sqlite3PagerSnapshotCheck(Pager *pPager, sqlite3_snapshot *pSnapshot){ + int rc; + if( pPager->pWal ){ + rc = sqlite3WalSnapshotCheck(pPager->pWal, pSnapshot); + }else{ + rc = SQLITE_ERROR; + } + return rc; +} + +/* +** Release a lock obtained by an earlier successful call to +** sqlite3PagerSnapshotCheck(). +*/ +SQLITE_PRIVATE void sqlite3PagerSnapshotUnlock(Pager *pPager){ + assert( pPager->pWal ); + return sqlite3WalSnapshotUnlock(pPager->pWal); +} + #endif /* SQLITE_ENABLE_SNAPSHOT */ #endif /* !SQLITE_OMIT_WAL */ @@ -55135,6 +58205,10 @@ ** on a network filesystem. All users of the database must be able to ** share memory. ** +** In the default unix and windows implementation, the wal-index is a mmapped +** file whose name is the database name with a "-shm" suffix added. For that +** reason, the wal-index is sometimes called the "shm" file. +** ** The wal-index is transient. After a crash, the wal-index can (and should ** be) reconstructed from the original WAL file. In fact, the VFS is required ** to either truncate or zero the header of the wal-index when the last @@ -55258,6 +58332,18 @@ #endif /* +** WAL mode depends on atomic aligned 32-bit loads and stores in a few +** places. The following macros try to make this explicit. +*/ +#if GCC_VESRION>=5004000 +# define AtomicLoad(PTR) __atomic_load_n((PTR),__ATOMIC_RELAXED) +# define AtomicStore(PTR,VAL) __atomic_store_n((PTR),(VAL),__ATOMIC_RELAXED) +#else +# define AtomicLoad(PTR) (*(PTR)) +# define AtomicStore(PTR,VAL) (*(PTR) = (VAL)) +#endif + +/* ** The maximum (and only) versions of the wal and wal-index formats ** that may be interpreted by this version of SQLite. ** @@ -55274,9 +58360,18 @@ #define WALINDEX_MAX_VERSION 3007000 /* -** Indices of various locking bytes. WAL_NREADER is the number +** Index numbers for various locking bytes. WAL_NREADER is the number ** of available reader locks and should be at least 3. The default ** is SQLITE_SHM_NLOCK==8 and WAL_NREADER==5. +** +** Technically, the various VFSes are free to implement these locks however +** they see fit. However, compatibility is encouraged so that VFSes can +** interoperate. The standard implemention used on both unix and windows +** is for the index number to indicate a byte offset into the +** WalCkptInfo.aLock[] array in the wal-index header. In other words, all +** locks are on the shm file. The WALINDEX_LOCK_OFFSET constant (which +** should be 120) is the location in the shm file for the first locking +** byte. */ #define WAL_WRITE_LOCK 0 #define WAL_ALL_BUT_WRITE 1 @@ -55400,7 +58495,6 @@ #define WAL_FRAME_HDRSIZE 24 /* Size of write ahead log header, including checksum. */ -/* #define WAL_HDRSIZE 24 */ #define WAL_HDRSIZE 32 /* WAL magic value. Either this value, or the same value with the least @@ -55446,6 +58540,7 @@ u8 truncateOnCommit; /* True to truncate WAL file on commit */ u8 syncHeader; /* Fsync the WAL header if true */ u8 padToSectorBoundary; /* Pad transactions out to the next sector */ + u8 bShmUnreliable; /* SHM content is read-only and unreliable */ WalIndexHdr hdr; /* Wal-index header for current transaction */ u32 minFrame; /* Ignore wal frames before this one */ u32 iReCksum; /* On commit, recalculate checksums from here */ @@ -55535,11 +58630,20 @@ ** is broken into pages of WALINDEX_PGSZ bytes. Wal-index pages are ** numbered from zero. ** +** If the wal-index is currently smaller the iPage pages then the size +** of the wal-index might be increased, but only if it is safe to do +** so. It is safe to enlarge the wal-index if pWal->writeLock is true +** or pWal->exclusiveMode==WAL_HEAPMEMORY_MODE. +** ** If this call is successful, *ppPage is set to point to the wal-index ** page and SQLITE_OK is returned. If an error (an OOM or VFS error) occurs, ** then an SQLite error code is returned and *ppPage is set to 0. */ -static int walIndexPage(Wal *pWal, int iPage, volatile u32 **ppPage){ +static SQLITE_NOINLINE int walIndexPageRealloc( + Wal *pWal, /* The WAL context */ + int iPage, /* The page we seek */ + volatile u32 **ppPage /* Write the page pointer here */ +){ int rc = SQLITE_OK; /* Enlarge the pWal->apWiData[] array if required */ @@ -55558,16 +58662,19 @@ } /* Request a pointer to the required page from the VFS */ - if( pWal->apWiData[iPage]==0 ){ - if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){ - pWal->apWiData[iPage] = (u32 volatile *)sqlite3MallocZero(WALINDEX_PGSZ); - if( !pWal->apWiData[iPage] ) rc = SQLITE_NOMEM_BKPT; - }else{ - rc = sqlite3OsShmMap(pWal->pDbFd, iPage, WALINDEX_PGSZ, - pWal->writeLock, (void volatile **)&pWal->apWiData[iPage] - ); + assert( pWal->apWiData[iPage]==0 ); + if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){ + pWal->apWiData[iPage] = (u32 volatile *)sqlite3MallocZero(WALINDEX_PGSZ); + if( !pWal->apWiData[iPage] ) rc = SQLITE_NOMEM_BKPT; + }else{ + rc = sqlite3OsShmMap(pWal->pDbFd, iPage, WALINDEX_PGSZ, + pWal->writeLock, (void volatile **)&pWal->apWiData[iPage] + ); + assert( pWal->apWiData[iPage]!=0 || rc!=SQLITE_OK || pWal->writeLock==0 ); + testcase( pWal->apWiData[iPage]==0 && rc==SQLITE_OK ); + if( (rc&0xff)==SQLITE_READONLY ){ + pWal->readOnly |= WAL_SHM_RDONLY; if( rc==SQLITE_READONLY ){ - pWal->readOnly |= WAL_SHM_RDONLY; rc = SQLITE_OK; } } @@ -55577,6 +58684,16 @@ assert( iPage==0 || *ppPage || rc!=SQLITE_OK ); return rc; } +static int walIndexPage( + Wal *pWal, /* The WAL context */ + int iPage, /* The page we seek */ + volatile u32 **ppPage /* Write the page pointer here */ +){ + if( pWal->nWiData<=iPage || (*ppPage = pWal->apWiData[iPage])==0 ){ + return walIndexPageRealloc(pWal, iPage, ppPage); + } + return SQLITE_OK; +} /* ** Return a pointer to the WalCkptInfo structure in the wal-index. @@ -55848,48 +58965,51 @@ return (iPriorHash+1)&(HASHTABLE_NSLOT-1); } +/* +** An instance of the WalHashLoc object is used to describe the location +** of a page hash table in the wal-index. This becomes the return value +** from walHashGet(). +*/ +typedef struct WalHashLoc WalHashLoc; +struct WalHashLoc { + volatile ht_slot *aHash; /* Start of the wal-index hash table */ + volatile u32 *aPgno; /* aPgno[1] is the page of first frame indexed */ + u32 iZero; /* One less than the frame number of first indexed*/ +}; + /* ** Return pointers to the hash table and page number array stored on ** page iHash of the wal-index. The wal-index is broken into 32KB pages ** numbered starting from 0. ** -** Set output variable *paHash to point to the start of the hash table -** in the wal-index file. Set *piZero to one less than the frame +** Set output variable pLoc->aHash to point to the start of the hash table +** in the wal-index file. Set pLoc->iZero to one less than the frame ** number of the first frame indexed by this hash table. If a ** slot in the hash table is set to N, it refers to frame number -** (*piZero+N) in the log. +** (pLoc->iZero+N) in the log. ** -** Finally, set *paPgno so that *paPgno[1] is the page number of the -** first frame indexed by the hash table, frame (*piZero+1). +** Finally, set pLoc->aPgno so that pLoc->aPgno[1] is the page number of the +** first frame indexed by the hash table, frame (pLoc->iZero+1). */ static int walHashGet( Wal *pWal, /* WAL handle */ int iHash, /* Find the iHash'th table */ - volatile ht_slot **paHash, /* OUT: Pointer to hash index */ - volatile u32 **paPgno, /* OUT: Pointer to page number array */ - u32 *piZero /* OUT: Frame associated with *paPgno[0] */ + WalHashLoc *pLoc /* OUT: Hash table location */ ){ int rc; /* Return code */ - volatile u32 *aPgno; - rc = walIndexPage(pWal, iHash, &aPgno); + rc = walIndexPage(pWal, iHash, &pLoc->aPgno); assert( rc==SQLITE_OK || iHash>0 ); if( rc==SQLITE_OK ){ - u32 iZero; - volatile ht_slot *aHash; - - aHash = (volatile ht_slot *)&aPgno[HASHTABLE_NPAGE]; + pLoc->aHash = (volatile ht_slot *)&pLoc->aPgno[HASHTABLE_NPAGE]; if( iHash==0 ){ - aPgno = &aPgno[WALINDEX_HDR_SIZE/sizeof(u32)]; - iZero = 0; + pLoc->aPgno = &pLoc->aPgno[WALINDEX_HDR_SIZE/sizeof(u32)]; + pLoc->iZero = 0; }else{ - iZero = HASHTABLE_NPAGE_ONE + (iHash-1)*HASHTABLE_NPAGE; + pLoc->iZero = HASHTABLE_NPAGE_ONE + (iHash-1)*HASHTABLE_NPAGE; } - - *paPgno = &aPgno[-1]; - *paHash = aHash; - *piZero = iZero; + pLoc->aPgno = &pLoc->aPgno[-1]; } return rc; } @@ -55935,9 +59055,7 @@ ** actually needed. */ static void walCleanupHash(Wal *pWal){ - volatile ht_slot *aHash = 0; /* Pointer to hash table to clear */ - volatile u32 *aPgno = 0; /* Page number array for hash table */ - u32 iZero = 0; /* frame == (aHash[x]+iZero) */ + WalHashLoc sLoc; /* Hash table location */ int iLimit = 0; /* Zero values greater than this */ int nByte; /* Number of bytes to zero in aPgno[] */ int i; /* Used to iterate through aHash[] */ @@ -55955,16 +59073,16 @@ */ assert( pWal->nWiData>walFramePage(pWal->hdr.mxFrame) ); assert( pWal->apWiData[walFramePage(pWal->hdr.mxFrame)] ); - walHashGet(pWal, walFramePage(pWal->hdr.mxFrame), &aHash, &aPgno, &iZero); + walHashGet(pWal, walFramePage(pWal->hdr.mxFrame), &sLoc); /* Zero all hash-table entries that correspond to frame numbers greater ** than pWal->hdr.mxFrame. */ - iLimit = pWal->hdr.mxFrame - iZero; + iLimit = pWal->hdr.mxFrame - sLoc.iZero; assert( iLimit>0 ); for(i=0; iiLimit ){ - aHash[i] = 0; + if( sLoc.aHash[i]>iLimit ){ + sLoc.aHash[i] = 0; } } @@ -55971,8 +59089,8 @@ /* Zero the entries in the aPgno array that correspond to frames with ** frame numbers greater than pWal->hdr.mxFrame. */ - nByte = (int)((char *)aHash - (char *)&aPgno[iLimit+1]); - memset((void *)&aPgno[iLimit+1], 0, nByte); + nByte = (int)((char *)sLoc.aHash - (char *)&sLoc.aPgno[iLimit+1]); + memset((void *)&sLoc.aPgno[iLimit+1], 0, nByte); #ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT /* Verify that the every entry in the mapping region is still reachable @@ -55982,10 +59100,10 @@ int j; /* Loop counter */ int iKey; /* Hash key */ for(j=1; j<=iLimit; j++){ - for(iKey=walHash(aPgno[j]); aHash[iKey]; iKey=walNextHash(iKey)){ - if( aHash[iKey]==j ) break; + for(iKey=walHash(sLoc.aPgno[j]);sLoc.aHash[iKey];iKey=walNextHash(iKey)){ + if( sLoc.aHash[iKey]==j ) break; } - assert( aHash[iKey]==j ); + assert( sLoc.aHash[iKey]==j ); } } #endif /* SQLITE_ENABLE_EXPENSIVE_ASSERT */ @@ -55998,11 +59116,9 @@ */ static int walIndexAppend(Wal *pWal, u32 iFrame, u32 iPage){ int rc; /* Return code */ - u32 iZero = 0; /* One less than frame number of aPgno[1] */ - volatile u32 *aPgno = 0; /* Page number array */ - volatile ht_slot *aHash = 0; /* Hash table */ + WalHashLoc sLoc; /* Wal-index hash table location */ - rc = walHashGet(pWal, walFramePage(iFrame), &aHash, &aPgno, &iZero); + rc = walHashGet(pWal, walFramePage(iFrame), &sLoc); /* Assuming the wal-index file was successfully mapped, populate the ** page number array and hash table entry. @@ -56012,7 +59128,7 @@ int idx; /* Value to write to hash-table slot */ int nCollide; /* Number of hash collisions */ - idx = iFrame - iZero; + idx = iFrame - sLoc.iZero; assert( idx <= HASHTABLE_NSLOT/2 + 1 ); /* If this is the first entry to be added to this hash-table, zero the @@ -56019,8 +59135,9 @@ ** entire hash table and aPgno[] array before proceeding. */ if( idx==1 ){ - int nByte = (int)((u8 *)&aHash[HASHTABLE_NSLOT] - (u8 *)&aPgno[1]); - memset((void*)&aPgno[1], 0, nByte); + int nByte = (int)((u8 *)&sLoc.aHash[HASHTABLE_NSLOT] + - (u8 *)&sLoc.aPgno[1]); + memset((void*)&sLoc.aPgno[1], 0, nByte); } /* If the entry in aPgno[] is already set, then the previous writer @@ -56029,18 +59146,18 @@ ** Remove the remnants of that writers uncommitted transaction from ** the hash-table before writing any new entries. */ - if( aPgno[idx] ){ + if( sLoc.aPgno[idx] ){ walCleanupHash(pWal); - assert( !aPgno[idx] ); + assert( !sLoc.aPgno[idx] ); } /* Write the aPgno[] array entry and the hash-table slot. */ nCollide = idx; - for(iKey=walHash(iPage); aHash[iKey]; iKey=walNextHash(iKey)){ + for(iKey=walHash(iPage); sLoc.aHash[iKey]; iKey=walNextHash(iKey)){ if( (nCollide--)==0 ) return SQLITE_CORRUPT_BKPT; } - aPgno[idx] = iPage; - aHash[iKey] = (ht_slot)idx; + sLoc.aPgno[idx] = iPage; + sLoc.aHash[iKey] = (ht_slot)idx; #ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT /* Verify that the number of entries in the hash table exactly equals @@ -56049,7 +59166,7 @@ { int i; /* Loop counter */ int nEntry = 0; /* Number of entries in the hash table */ - for(i=0; iwriteLock ); iLock = WAL_ALL_BUT_WRITE + pWal->ckptLock; - nLock = SQLITE_SHM_NLOCK - iLock; - rc = walLockExclusive(pWal, iLock, nLock); + rc = walLockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock); + if( rc==SQLITE_OK ){ + rc = walLockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1); + if( rc!=SQLITE_OK ){ + walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock); + } + } if( rc ){ return rc; } + WALTRACE(("WAL%p: recovery begin...\n", pWal)); memset(&pWal->hdr, 0, sizeof(WalIndexHdr)); @@ -56245,7 +59369,8 @@ recovery_error: WALTRACE(("WAL%p: recovery %s\n", pWal, rc ? "failed" : "ok")); - walUnlockExclusive(pWal, iLock, nLock); + walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock); + walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1); return rc; } @@ -56253,13 +59378,14 @@ ** Close an open wal-index. */ static void walIndexClose(Wal *pWal, int isDelete){ - if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){ + if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE || pWal->bShmUnreliable ){ int i; for(i=0; inWiData; i++){ sqlite3_free((void *)pWal->apWiData[i]); pWal->apWiData[i] = 0; } - }else{ + } + if( pWal->exclusiveMode!=WAL_HEAPMEMORY_MODE ){ sqlite3OsShmUnmap(pWal->pDbFd, isDelete); } } @@ -56546,8 +59672,9 @@ /* ** Construct a WalInterator object that can be used to loop over all -** pages in the WAL in ascending order. The caller must hold the checkpoint -** lock. +** pages in the WAL following frame nBackfill in ascending order. Frames +** nBackfill or earlier may be included - excluding them is an optimization +** only. The caller must hold the checkpoint lock. ** ** On success, make *pp point to the newly allocated WalInterator object ** return SQLITE_OK. Otherwise, return an error code. If this routine @@ -56556,7 +59683,7 @@ ** The calling routine should invoke walIteratorFree() to destroy the ** WalIterator object when it has finished with it. */ -static int walIteratorInit(Wal *pWal, WalIterator **pp){ +static int walIteratorInit(Wal *pWal, u32 nBackfill, WalIterator **pp){ WalIterator *p; /* Return value */ int nSegment; /* Number of segments to merge */ u32 iLast; /* Last frame in log */ @@ -56593,34 +59720,32 @@ rc = SQLITE_NOMEM_BKPT; } - for(i=0; rc==SQLITE_OK && iaSegment[p->nSegment])[iZero]; - iZero++; + aIndex = &((ht_slot *)&p->aSegment[p->nSegment])[sLoc.iZero]; + sLoc.iZero++; for(j=0; jaSegment[i].iZero = iZero; + walMergesort((u32 *)sLoc.aPgno, aTmp, aIndex, &nEntry); + p->aSegment[i].iZero = sLoc.iZero; p->aSegment[i].nEntry = nEntry; p->aSegment[i].aIndex = aIndex; - p->aSegment[i].aPgno = (u32 *)aPgno; + p->aSegment[i].aPgno = (u32 *)sLoc.aPgno; } } sqlite3_free(aTmp); @@ -56627,6 +59752,7 @@ if( rc!=SQLITE_OK ){ walIteratorFree(p); + p = 0; } *pp = p; return rc; @@ -56749,13 +59875,6 @@ pInfo = walCkptInfo(pWal); if( pInfo->nBackfillhdr.mxFrame ){ - /* Allocate the iterator */ - rc = walIteratorInit(pWal, &pIter); - if( rc!=SQLITE_OK ){ - return rc; - } - assert( pIter ); - /* EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked ** in the SQLITE_CHECKPOINT_PASSIVE mode. */ assert( eMode!=SQLITE_CHECKPOINT_PASSIVE || xBusy==0 ); @@ -56792,18 +59911,21 @@ } } - if( pInfo->nBackfillnBackfillnBackfill, &pIter); + assert( rc==SQLITE_OK || pIter==0 ); + } + + if( pIter && (rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(0),1))==SQLITE_OK ){ - i64 nSize; /* Current size of database file */ u32 nBackfill = pInfo->nBackfill; pInfo->nBackfillAttempted = mxSafeFrame; /* Sync the WAL to disk */ - if( sync_flags ){ - rc = sqlite3OsSync(pWal->pWalFd, sync_flags); - } + rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags)); /* If the database may grow as a result of this checkpoint, hint ** about the eventual size of the db file to the VFS layer. @@ -56810,6 +59932,7 @@ */ if( rc==SQLITE_OK ){ i64 nReq = ((i64)mxPage * szPage); + i64 nSize; /* Current size of database file */ rc = sqlite3OsFileSize(pWal->pDbFd, &nSize); if( rc==SQLITE_OK && nSizepDbFd, SQLITE_FCNTL_SIZE_HINT, &nReq); @@ -56844,8 +59967,8 @@ i64 szDb = pWal->hdr.nPage*(i64)szPage; testcase( IS_BIG_INT(szDb) ); rc = sqlite3OsTruncate(pWal->pDbFd, szDb); - if( rc==SQLITE_OK && sync_flags ){ - rc = sqlite3OsSync(pWal->pDbFd, sync_flags); + if( rc==SQLITE_OK ){ + rc = sqlite3OsSync(pWal->pDbFd, CKPT_SYNC_FLAGS(sync_flags)); } } if( rc==SQLITE_OK ){ @@ -57055,6 +60178,12 @@ } /* +** This is the value that walTryBeginRead returns when it needs to +** be retried. +*/ +#define WAL_RETRY (-1) + +/* ** Read the wal-index header from the wal-index and into pWal->hdr. ** If the wal-header appears to be corrupt, try to reconstruct the ** wal-index from the WAL before returning. @@ -57077,9 +60206,29 @@ assert( pChanged ); rc = walIndexPage(pWal, 0, &page0); if( rc!=SQLITE_OK ){ - return rc; - }; - assert( page0 || pWal->writeLock==0 ); + assert( rc!=SQLITE_READONLY ); /* READONLY changed to OK in walIndexPage */ + if( rc==SQLITE_READONLY_CANTINIT ){ + /* The SQLITE_READONLY_CANTINIT return means that the shared-memory + ** was openable but is not writable, and this thread is unable to + ** confirm that another write-capable connection has the shared-memory + ** open, and hence the content of the shared-memory is unreliable, + ** since the shared-memory might be inconsistent with the WAL file + ** and there is no writer on hand to fix it. */ + assert( page0==0 ); + assert( pWal->writeLock==0 ); + assert( pWal->readOnly & WAL_SHM_RDONLY ); + pWal->bShmUnreliable = 1; + pWal->exclusiveMode = WAL_HEAPMEMORY_MODE; + *pChanged = 1; + }else{ + return rc; /* Any other non-OK return is just an error */ + } + }else{ + /* page0 can be NULL if the SHM is zero bytes in size and pWal->writeLock + ** is zero, which prevents the SHM from growing */ + testcase( page0!=0 ); + } + assert( page0!=0 || pWal->writeLock==0 ); /* If the first page of the wal-index has been mapped, try to read the ** wal-index header immediately, without holding any lock. This usually @@ -57093,7 +60242,7 @@ */ assert( badHdr==0 || pWal->writeLock==0 ); if( badHdr ){ - if( pWal->readOnly & WAL_SHM_RDONLY ){ + if( pWal->bShmUnreliable==0 && (pWal->readOnly & WAL_SHM_RDONLY) ){ if( SQLITE_OK==(rc = walLockShared(pWal, WAL_WRITE_LOCK)) ){ walUnlockShared(pWal, WAL_WRITE_LOCK); rc = SQLITE_READONLY_RECOVERY; @@ -57123,16 +60272,194 @@ if( badHdr==0 && pWal->hdr.iVersion!=WALINDEX_MAX_VERSION ){ rc = SQLITE_CANTOPEN_BKPT; } + if( pWal->bShmUnreliable ){ + if( rc!=SQLITE_OK ){ + walIndexClose(pWal, 0); + pWal->bShmUnreliable = 0; + assert( pWal->nWiData>0 && pWal->apWiData[0]==0 ); + /* walIndexRecover() might have returned SHORT_READ if a concurrent + ** writer truncated the WAL out from under it. If that happens, it + ** indicates that a writer has fixed the SHM file for us, so retry */ + if( rc==SQLITE_IOERR_SHORT_READ ) rc = WAL_RETRY; + } + pWal->exclusiveMode = WAL_NORMAL_MODE; + } return rc; } /* -** This is the value that walTryBeginRead returns when it needs to -** be retried. +** Open a transaction in a connection where the shared-memory is read-only +** and where we cannot verify that there is a separate write-capable connection +** on hand to keep the shared-memory up-to-date with the WAL file. +** +** This can happen, for example, when the shared-memory is implemented by +** memory-mapping a *-shm file, where a prior writer has shut down and +** left the *-shm file on disk, and now the present connection is trying +** to use that database but lacks write permission on the *-shm file. +** Other scenarios are also possible, depending on the VFS implementation. +** +** Precondition: +** +** The *-wal file has been read and an appropriate wal-index has been +** constructed in pWal->apWiData[] using heap memory instead of shared +** memory. +** +** If this function returns SQLITE_OK, then the read transaction has +** been successfully opened. In this case output variable (*pChanged) +** is set to true before returning if the caller should discard the +** contents of the page cache before proceeding. Or, if it returns +** WAL_RETRY, then the heap memory wal-index has been discarded and +** the caller should retry opening the read transaction from the +** beginning (including attempting to map the *-shm file). +** +** If an error occurs, an SQLite error code is returned. */ -#define WAL_RETRY (-1) +static int walBeginShmUnreliable(Wal *pWal, int *pChanged){ + i64 szWal; /* Size of wal file on disk in bytes */ + i64 iOffset; /* Current offset when reading wal file */ + u8 aBuf[WAL_HDRSIZE]; /* Buffer to load WAL header into */ + u8 *aFrame = 0; /* Malloc'd buffer to load entire frame */ + int szFrame; /* Number of bytes in buffer aFrame[] */ + u8 *aData; /* Pointer to data part of aFrame buffer */ + volatile void *pDummy; /* Dummy argument for xShmMap */ + int rc; /* Return code */ + u32 aSaveCksum[2]; /* Saved copy of pWal->hdr.aFrameCksum */ + assert( pWal->bShmUnreliable ); + assert( pWal->readOnly & WAL_SHM_RDONLY ); + assert( pWal->nWiData>0 && pWal->apWiData[0] ); + + /* Take WAL_READ_LOCK(0). This has the effect of preventing any + ** writers from running a checkpoint, but does not stop them + ** from running recovery. */ + rc = walLockShared(pWal, WAL_READ_LOCK(0)); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_BUSY ) rc = WAL_RETRY; + goto begin_unreliable_shm_out; + } + pWal->readLock = 0; + + /* Check to see if a separate writer has attached to the shared-memory area, + ** thus making the shared-memory "reliable" again. Do this by invoking + ** the xShmMap() routine of the VFS and looking to see if the return + ** is SQLITE_READONLY instead of SQLITE_READONLY_CANTINIT. + ** + ** If the shared-memory is now "reliable" return WAL_RETRY, which will + ** cause the heap-memory WAL-index to be discarded and the actual + ** shared memory to be used in its place. + ** + ** This step is important because, even though this connection is holding + ** the WAL_READ_LOCK(0) which prevents a checkpoint, a writer might + ** have already checkpointed the WAL file and, while the current + ** is active, wrap the WAL and start overwriting frames that this + ** process wants to use. + ** + ** Once sqlite3OsShmMap() has been called for an sqlite3_file and has + ** returned any SQLITE_READONLY value, it must return only SQLITE_READONLY + ** or SQLITE_READONLY_CANTINIT or some error for all subsequent invocations, + ** even if some external agent does a "chmod" to make the shared-memory + ** writable by us, until sqlite3OsShmUnmap() has been called. + ** This is a requirement on the VFS implementation. + */ + rc = sqlite3OsShmMap(pWal->pDbFd, 0, WALINDEX_PGSZ, 0, &pDummy); + assert( rc!=SQLITE_OK ); /* SQLITE_OK not possible for read-only connection */ + if( rc!=SQLITE_READONLY_CANTINIT ){ + rc = (rc==SQLITE_READONLY ? WAL_RETRY : rc); + goto begin_unreliable_shm_out; + } + + /* We reach this point only if the real shared-memory is still unreliable. + ** Assume the in-memory WAL-index substitute is correct and load it + ** into pWal->hdr. + */ + memcpy(&pWal->hdr, (void*)walIndexHdr(pWal), sizeof(WalIndexHdr)); + + /* Make sure some writer hasn't come in and changed the WAL file out + ** from under us, then disconnected, while we were not looking. + */ + rc = sqlite3OsFileSize(pWal->pWalFd, &szWal); + if( rc!=SQLITE_OK ){ + goto begin_unreliable_shm_out; + } + if( szWalhdr.mxFrame==0 ? SQLITE_OK : WAL_RETRY); + goto begin_unreliable_shm_out; + } + + /* Check the salt keys at the start of the wal file still match. */ + rc = sqlite3OsRead(pWal->pWalFd, aBuf, WAL_HDRSIZE, 0); + if( rc!=SQLITE_OK ){ + goto begin_unreliable_shm_out; + } + if( memcmp(&pWal->hdr.aSalt, &aBuf[16], 8) ){ + /* Some writer has wrapped the WAL file while we were not looking. + ** Return WAL_RETRY which will cause the in-memory WAL-index to be + ** rebuilt. */ + rc = WAL_RETRY; + goto begin_unreliable_shm_out; + } + + /* Allocate a buffer to read frames into */ + szFrame = pWal->hdr.szPage + WAL_FRAME_HDRSIZE; + aFrame = (u8 *)sqlite3_malloc64(szFrame); + if( aFrame==0 ){ + rc = SQLITE_NOMEM_BKPT; + goto begin_unreliable_shm_out; + } + aData = &aFrame[WAL_FRAME_HDRSIZE]; + + /* Check to see if a complete transaction has been appended to the + ** wal file since the heap-memory wal-index was created. If so, the + ** heap-memory wal-index is discarded and WAL_RETRY returned to + ** the caller. */ + aSaveCksum[0] = pWal->hdr.aFrameCksum[0]; + aSaveCksum[1] = pWal->hdr.aFrameCksum[1]; + for(iOffset=walFrameOffset(pWal->hdr.mxFrame+1, pWal->hdr.szPage); + iOffset+szFrame<=szWal; + iOffset+=szFrame + ){ + u32 pgno; /* Database page number for frame */ + u32 nTruncate; /* dbsize field from frame header */ + + /* Read and decode the next log frame. */ + rc = sqlite3OsRead(pWal->pWalFd, aFrame, szFrame, iOffset); + if( rc!=SQLITE_OK ) break; + if( !walDecodeFrame(pWal, &pgno, &nTruncate, aData, aFrame) ) break; + + /* If nTruncate is non-zero, then a complete transaction has been + ** appended to this wal file. Set rc to WAL_RETRY and break out of + ** the loop. */ + if( nTruncate ){ + rc = WAL_RETRY; + break; + } + } + pWal->hdr.aFrameCksum[0] = aSaveCksum[0]; + pWal->hdr.aFrameCksum[1] = aSaveCksum[1]; + + begin_unreliable_shm_out: + sqlite3_free(aFrame); + if( rc!=SQLITE_OK ){ + int i; + for(i=0; inWiData; i++){ + sqlite3_free((void*)pWal->apWiData[i]); + pWal->apWiData[i] = 0; + } + pWal->bShmUnreliable = 0; + sqlite3WalEndReadTransaction(pWal); + *pChanged = 1; + } + return rc; +} + /* ** Attempt to start a read transaction. This might fail due to a race or ** other transient condition. When that happens, it returns WAL_RETRY to @@ -57147,7 +60474,7 @@ ** checkpointed. If useWal==0 then this routine calls walIndexReadHdr() ** to make a copy of the wal-index header into pWal->hdr. If the ** wal-index header has changed, *pChanged is set to 1 (as an indication -** to the caller that the local paget cache is obsolete and needs to be +** to the caller that the local page cache is obsolete and needs to be ** flushed.) When useWal==1, the wal-index header is assumed to already ** be loaded and the pChanged parameter is unused. ** @@ -57193,6 +60520,9 @@ assert( pWal->readLock<0 ); /* Not currently locked */ + /* useWal may only be set for read/write connections */ + assert( (pWal->readOnly & WAL_SHM_RDONLY)==0 || useWal==0 ); + /* Take steps to avoid spinning forever if there is a protocol error. ** ** Circumstances that cause a RETRY should only last for the briefest @@ -57221,7 +60551,10 @@ } if( !useWal ){ - rc = walIndexReadHdr(pWal, pChanged); + assert( rc==SQLITE_OK ); + if( pWal->bShmUnreliable==0 ){ + rc = walIndexReadHdr(pWal, pChanged); + } if( rc==SQLITE_BUSY ){ /* If there is not a recovery running in another thread or process ** then convert BUSY errors to WAL_RETRY. If recovery is known to @@ -57250,13 +60583,17 @@ if( rc!=SQLITE_OK ){ return rc; } + else if( pWal->bShmUnreliable ){ + return walBeginShmUnreliable(pWal, pChanged); + } } + assert( pWal->nWiData>0 ); + assert( pWal->apWiData[0]!=0 ); pInfo = walCkptInfo(pWal); - if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame + if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame #ifdef SQLITE_ENABLE_SNAPSHOT - && (pWal->pSnapshot==0 || pWal->hdr.mxFrame==0 - || 0==memcmp(&pWal->hdr, pWal->pSnapshot, sizeof(WalIndexHdr))) + && (pWal->pSnapshot==0 || pWal->hdr.mxFrame==0) #endif ){ /* The WAL has been completely backfilled (or it is empty). @@ -57303,7 +60640,7 @@ } #endif for(i=1; iaReadMark[i]; + u32 thisMark = AtomicLoad(pInfo->aReadMark+i); if( mxReadMark<=thisMark && thisMark<=mxFrame ){ assert( thisMark!=READMARK_NOT_USED ); mxReadMark = thisMark; @@ -57316,7 +60653,7 @@ for(i=1; iaReadMark[i] = mxFrame; + mxReadMark = AtomicStore(pInfo->aReadMark+i,mxFrame); mxI = i; walUnlockExclusive(pWal, WAL_READ_LOCK(i), 1); break; @@ -57327,7 +60664,7 @@ } if( mxI==0 ){ assert( rc==SQLITE_BUSY || (pWal->readOnly & WAL_SHM_RDONLY)!=0 ); - return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTLOCK; + return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTINIT; } rc = walLockShared(pWal, WAL_READ_LOCK(mxI)); @@ -57368,9 +60705,9 @@ ** we can guarantee that the checkpointer that set nBackfill could not ** see any pages past pWal->hdr.mxFrame, this problem does not come up. */ - pWal->minFrame = pInfo->nBackfill+1; + pWal->minFrame = AtomicLoad(&pInfo->nBackfill)+1; walShmBarrier(pWal); - if( pInfo->aReadMark[mxI]!=mxReadMark + if( AtomicLoad(pInfo->aReadMark+mxI)!=mxReadMark || memcmp((void *)walIndexHdr(pWal), &pWal->hdr, sizeof(WalIndexHdr)) ){ walUnlockShared(pWal, WAL_READ_LOCK(mxI)); @@ -57421,16 +60758,14 @@ }else{ u32 i = pInfo->nBackfillAttempted; for(i=pInfo->nBackfillAttempted; i>pInfo->nBackfill; i--){ - volatile ht_slot *dummy; - volatile u32 *aPgno; /* Array of page numbers */ - u32 iZero; /* Frame corresponding to aPgno[0] */ + WalHashLoc sLoc; /* Hash table location */ u32 pgno; /* Page number in db file */ i64 iDbOff; /* Offset of db file entry */ i64 iWalOff; /* Offset of wal file entry */ - rc = walHashGet(pWal, walFramePage(i), &dummy, &aPgno, &iZero); + rc = walHashGet(pWal, walFramePage(i), &sLoc); if( rc!=SQLITE_OK ) break; - pgno = aPgno[i-iZero]; + pgno = sLoc.aPgno[i-sLoc.iZero]; iDbOff = (i64)(pgno-1) * szPage; if( iDbOff+szPage<=szDb ){ @@ -57471,7 +60806,7 @@ ** ** If the database contents have changes since the previous read ** transaction, then *pChanged is set to 1 before returning. The -** Pager layer will use this to know that is cache is stale and +** Pager layer will use this to know that its cache is stale and ** needs to be flushed. */ SQLITE_PRIVATE int sqlite3WalBeginReadTransaction(Wal *pWal, int *pChanged){ @@ -57533,7 +60868,7 @@ /* Check that the wal file has not been wrapped. Assuming that it has ** not, also check that no checkpointer has attempted to checkpoint any ** frames beyond pSnapshot->mxFrame. If either of these conditions are - ** true, return SQLITE_BUSY_SNAPSHOT. Otherwise, overwrite pWal->hdr + ** true, return SQLITE_ERROR_SNAPSHOT. Otherwise, overwrite pWal->hdr ** with *pSnapshot and set *pChanged as appropriate for opening the ** snapshot. */ if( !memcmp(pSnapshot->aSalt, pWal->hdr.aSalt, sizeof(pWal->hdr.aSalt)) @@ -57543,11 +60878,12 @@ memcpy(&pWal->hdr, pSnapshot, sizeof(WalIndexHdr)); *pChanged = bChanged; }else{ - rc = SQLITE_BUSY_SNAPSHOT; + rc = SQLITE_ERROR_SNAPSHOT; } /* Release the shared CKPT lock obtained above. */ walUnlockShared(pWal, WAL_CKPT_LOCK); + pWal->minFrame = 1; } @@ -57599,7 +60935,7 @@ ** then the WAL is ignored by the reader so return early, as if the ** WAL were empty. */ - if( iLast==0 || pWal->readLock==0 ){ + if( iLast==0 || (pWal->readLock==0 && pWal->bShmUnreliable==0) ){ *piRead = 0; return SQLITE_OK; } @@ -57630,22 +60966,21 @@ ** table after the current read-transaction had started. */ iMinHash = walFramePage(pWal->minFrame); - for(iHash=walFramePage(iLast); iHash>=iMinHash && iRead==0; iHash--){ - volatile ht_slot *aHash; /* Pointer to hash table */ - volatile u32 *aPgno; /* Pointer to array of page numbers */ - u32 iZero; /* Frame number corresponding to aPgno[0] */ + for(iHash=walFramePage(iLast); iHash>=iMinHash; iHash--){ + WalHashLoc sLoc; /* Hash table location */ int iKey; /* Hash slot index */ int nCollide; /* Number of hash collisions remaining */ int rc; /* Error code */ - rc = walHashGet(pWal, iHash, &aHash, &aPgno, &iZero); + rc = walHashGet(pWal, iHash, &sLoc); if( rc!=SQLITE_OK ){ return rc; } nCollide = HASHTABLE_NSLOT; - for(iKey=walHash(pgno); aHash[iKey]; iKey=walNextHash(iKey)){ - u32 iFrame = aHash[iKey] + iZero; - if( iFrame<=iLast && iFrame>=pWal->minFrame && aPgno[aHash[iKey]]==pgno ){ + for(iKey=walHash(pgno); sLoc.aHash[iKey]; iKey=walNextHash(iKey)){ + u32 iFrame = sLoc.aHash[iKey] + sLoc.iZero; + if( iFrame<=iLast && iFrame>=pWal->minFrame + && sLoc.aPgno[sLoc.aHash[iKey]]==pgno ){ assert( iFrame>iRead || CORRUPT_DB ); iRead = iFrame; } @@ -57653,6 +60988,7 @@ return SQLITE_CORRUPT_BKPT; } } + if( iRead ) break; } #ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT @@ -57662,8 +60998,8 @@ { u32 iRead2 = 0; u32 iTest; - assert( pWal->minFrame>0 ); - for(iTest=iLast; iTest>=pWal->minFrame; iTest--){ + assert( pWal->bShmUnreliable || pWal->minFrame>0 ); + for(iTest=iLast; iTest>=pWal->minFrame && iTest>0; iTest--){ if( walFramePgno(pWal, iTest)==pgno ){ iRead2 = iTest; break; @@ -57951,8 +61287,8 @@ iOffset += iFirstAmt; iAmt -= iFirstAmt; pContent = (void*)(iFirstAmt + (char*)pContent); - assert( p->syncFlags & (SQLITE_SYNC_NORMAL|SQLITE_SYNC_FULL) ); - rc = sqlite3OsSync(p->pFd, p->syncFlags & SQLITE_SYNC_MASK); + assert( WAL_SYNC_FLAGS(p->syncFlags)!=0 ); + rc = sqlite3OsSync(p->pFd, WAL_SYNC_FLAGS(p->syncFlags)); if( iAmt==0 || rc ) return rc; } rc = sqlite3OsWrite(p->pFd, pContent, iAmt, iOffset); @@ -58122,10 +61458,10 @@ ** an out-of-order write following a WAL restart could result in ** database corruption. See the ticket: ** - ** http://localhost:591/sqlite/info/ff5be73dee + ** https://sqlite.org/src/info/ff5be73dee */ - if( pWal->syncHeader && sync_flags ){ - rc = sqlite3OsSync(pWal->pWalFd, sync_flags & SQLITE_SYNC_MASK); + if( pWal->syncHeader ){ + rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags)); if( rc ) return rc; } } @@ -58200,7 +61536,7 @@ ** sector boundary is synced; the part of the last frame that extends ** past the sector boundary is written after the sync. */ - if( isCommit && (sync_flags & WAL_SYNC_TRANSACTIONS)!=0 ){ + if( isCommit && WAL_SYNC_FLAGS(sync_flags)!=0 ){ int bSync = 1; if( pWal->padToSectorBoundary ){ int sectorSize = sqlite3SectorSize(pWal->pWalFd); @@ -58216,7 +61552,7 @@ } if( bSync ){ assert( rc==SQLITE_OK ); - rc = sqlite3OsSync(w.pFd, sync_flags & SQLITE_SYNC_MASK); + rc = sqlite3OsSync(w.pFd, WAL_SYNC_FLAGS(sync_flags)); } } @@ -58439,24 +61775,24 @@ assert( pWal->readLock>=0 || (op<=0 && pWal->exclusiveMode==0) ); if( op==0 ){ - if( pWal->exclusiveMode ){ - pWal->exclusiveMode = 0; + if( pWal->exclusiveMode!=WAL_NORMAL_MODE ){ + pWal->exclusiveMode = WAL_NORMAL_MODE; if( walLockShared(pWal, WAL_READ_LOCK(pWal->readLock))!=SQLITE_OK ){ - pWal->exclusiveMode = 1; + pWal->exclusiveMode = WAL_EXCLUSIVE_MODE; } - rc = pWal->exclusiveMode==0; + rc = pWal->exclusiveMode==WAL_NORMAL_MODE; }else{ /* Already in locking_mode=NORMAL */ rc = 0; } }else if( op>0 ){ - assert( pWal->exclusiveMode==0 ); + assert( pWal->exclusiveMode==WAL_NORMAL_MODE ); assert( pWal->readLock>=0 ); walUnlockShared(pWal, WAL_READ_LOCK(pWal->readLock)); - pWal->exclusiveMode = 1; + pWal->exclusiveMode = WAL_EXCLUSIVE_MODE; rc = 1; }else{ - rc = pWal->exclusiveMode==0; + rc = pWal->exclusiveMode==WAL_NORMAL_MODE; } return rc; } @@ -58519,6 +61855,43 @@ if( pHdr1->mxFrame>pHdr2->mxFrame ) return +1; return 0; } + +/* +** The caller currently has a read transaction open on the database. +** This function takes a SHARED lock on the CHECKPOINTER slot and then +** checks if the snapshot passed as the second argument is still +** available. If so, SQLITE_OK is returned. +** +** If the snapshot is not available, SQLITE_ERROR is returned. Or, if +** the CHECKPOINTER lock cannot be obtained, SQLITE_BUSY. If any error +** occurs (any value other than SQLITE_OK is returned), the CHECKPOINTER +** lock is released before returning. +*/ +SQLITE_PRIVATE int sqlite3WalSnapshotCheck(Wal *pWal, sqlite3_snapshot *pSnapshot){ + int rc; + rc = walLockShared(pWal, WAL_CKPT_LOCK); + if( rc==SQLITE_OK ){ + WalIndexHdr *pNew = (WalIndexHdr*)pSnapshot; + if( memcmp(pNew->aSalt, pWal->hdr.aSalt, sizeof(pWal->hdr.aSalt)) + || pNew->mxFramenBackfillAttempted + ){ + rc = SQLITE_ERROR_SNAPSHOT; + walUnlockShared(pWal, WAL_CKPT_LOCK); + } + } + return rc; +} + +/* +** Release a lock obtained by an earlier successful call to +** sqlite3WalSnapshotCheck(). +*/ +SQLITE_PRIVATE void sqlite3WalSnapshotUnlock(Wal *pWal){ + assert( pWal ); + walUnlockShared(pWal, WAL_CKPT_LOCK); +} + + #endif /* SQLITE_ENABLE_SNAPSHOT */ #ifdef SQLITE_ENABLE_ZIPVFS @@ -59063,30 +62436,31 @@ ** eState==FAULT: Cursor fault with skipNext as error code. */ struct BtCursor { + u8 eState; /* One of the CURSOR_XXX constants (see below) */ + u8 curFlags; /* zero or more BTCF_* flags defined below */ + u8 curPagerFlags; /* Flags to send to sqlite3PagerGet() */ + u8 hints; /* As configured by CursorSetHints() */ + int skipNext; /* Prev() is noop if negative. Next() is noop if positive. + ** Error code if eState==CURSOR_FAULT */ Btree *pBtree; /* The Btree to which this cursor belongs */ + Pgno *aOverflow; /* Cache of overflow page locations */ + void *pKey; /* Saved key that was cursor last known position */ + /* All fields above are zeroed when the cursor is allocated. See + ** sqlite3BtreeCursorZero(). Fields that follow must be manually + ** initialized. */ +#define BTCURSOR_FIRST_UNINIT pBt /* Name of first uninitialized field */ BtShared *pBt; /* The BtShared this cursor points to */ BtCursor *pNext; /* Forms a linked list of all cursors */ - Pgno *aOverflow; /* Cache of overflow page locations */ CellInfo info; /* A parse of the cell we are pointing at */ i64 nKey; /* Size of pKey, or last integer key */ - void *pKey; /* Saved key that was cursor last known position */ Pgno pgnoRoot; /* The root page of this tree */ - int nOvflAlloc; /* Allocated size of aOverflow[] array */ - int skipNext; /* Prev() is noop if negative. Next() is noop if positive. - ** Error code if eState==CURSOR_FAULT */ - u8 curFlags; /* zero or more BTCF_* flags defined below */ - u8 curPagerFlags; /* Flags to send to sqlite3PagerGet() */ - u8 eState; /* One of the CURSOR_XXX constants (see below) */ - u8 hints; /* As configured by CursorSetHints() */ - /* All fields above are zeroed when the cursor is allocated. See - ** sqlite3BtreeCursorZero(). Fields that follow must be manually - ** initialized. */ i8 iPage; /* Index of current page in apPage */ u8 curIntKey; /* Value of apPage[0]->intKey */ u16 ix; /* Current index for apPage[iPage] */ u16 aiIdx[BTCURSOR_MAX_DEPTH-1]; /* Current index in apPage[i] */ struct KeyInfo *pKeyInfo; /* Arg passed to comparison function */ - MemPage *apPage[BTCURSOR_MAX_DEPTH]; /* Pages from root to current page */ + MemPage *pPage; /* Current page */ + MemPage *apPage[BTCURSOR_MAX_DEPTH-1]; /* Stack of parents of current page */ }; /* @@ -59129,8 +62503,8 @@ ** Do nothing else with this cursor. Any attempt to use the cursor ** should return the error code stored in BtCursor.skipNext */ -#define CURSOR_INVALID 0 -#define CURSOR_VALID 1 +#define CURSOR_VALID 0 +#define CURSOR_INVALID 1 #define CURSOR_SKIPNEXT 2 #define CURSOR_REQUIRESEEK 3 #define CURSOR_FAULT 4 @@ -59447,10 +62821,10 @@ skipOk = 0; } } - db->skipBtreeMutex = skipOk; + db->noSharedCache = skipOk; } SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3 *db){ - if( db->skipBtreeMutex==0 ) btreeEnterAll(db); + if( db->noSharedCache==0 ) btreeEnterAll(db); } static void SQLITE_NOINLINE btreeLeaveAll(sqlite3 *db){ int i; @@ -59462,7 +62836,7 @@ } } SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3 *db){ - if( db->skipBtreeMutex==0 ) btreeLeaveAll(db); + if( db->noSharedCache==0 ) btreeLeaveAll(db); } #ifndef NDEBUG @@ -59675,6 +63049,34 @@ #define hasReadConflicts(a, b) 0 #endif +/* +** Implementation of the SQLITE_CORRUPT_PAGE() macro. Takes a single +** (MemPage*) as an argument. The (MemPage*) must not be NULL. +** +** If SQLITE_DEBUG is not defined, then this macro is equivalent to +** SQLITE_CORRUPT_BKPT. Or, if SQLITE_DEBUG is set, then the log message +** normally produced as a side-effect of SQLITE_CORRUPT_BKPT is augmented +** with the page number and filename associated with the (MemPage*). +*/ +#ifdef SQLITE_DEBUG +int corruptPageError(int lineno, MemPage *p){ + char *zMsg; + sqlite3BeginBenignMalloc(); + zMsg = sqlite3_mprintf("database corruption page %d of %s", + (int)p->pgno, sqlite3PagerFilename(p->pBt->pPager, 0) + ); + sqlite3EndBenignMalloc(); + if( zMsg ){ + sqlite3ReportError(SQLITE_CORRUPT, lineno, zMsg); + } + sqlite3_free(zMsg); + return SQLITE_CORRUPT_BKPT; +} +# define SQLITE_CORRUPT_PAGE(pMemPage) corruptPageError(__LINE__, pMemPage) +#else +# define SQLITE_CORRUPT_PAGE(pMemPage) SQLITE_CORRUPT_PGNO(pMemPage->pgno) +#endif + #ifndef SQLITE_OMIT_SHARED_CACHE #ifdef SQLITE_DEBUG @@ -60002,7 +63404,9 @@ #endif /* SQLITE_OMIT_SHARED_CACHE */ -static void releasePage(MemPage *pPage); /* Forward reference */ +static void releasePage(MemPage *pPage); /* Forward reference */ +static void releasePageOne(MemPage *pPage); /* Forward reference */ +static void releasePageNotNull(MemPage *pPage); /* Forward reference */ /* ***** This routine is used inside of assert() only **** @@ -60161,11 +63565,13 @@ */ static void btreeReleaseAllCursorPages(BtCursor *pCur){ int i; - for(i=0; i<=pCur->iPage; i++){ - releasePage(pCur->apPage[i]); - pCur->apPage[i] = 0; + if( pCur->iPage>=0 ){ + for(i=0; iiPage; i++){ + releasePageNotNull(pCur->apPage[i]); + } + releasePageNotNull(pCur->pPage); + pCur->iPage = -1; } - pCur->iPage = -1; } /* @@ -60294,7 +63700,7 @@ return rc; } }else{ - testcase( p->iPage>0 ); + testcase( p->iPage>=0 ); btreeReleaseAllCursorPages(p); } } @@ -60334,7 +63740,7 @@ if( pIdxKey==0 ) return SQLITE_NOMEM_BKPT; sqlite3VdbeRecordUnpack(pCur->pKeyInfo, (int)nKey, pKey, pIdxKey); if( pIdxKey->nField==0 ){ - rc = SQLITE_CORRUPT_PGNO(pCur->apPage[pCur->iPage]->pgno); + rc = SQLITE_CORRUPT_BKPT; goto moveto_done; } }else{ @@ -60395,10 +63801,25 @@ ** back to where it ought to be if this routine returns true. */ SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor *pCur){ - return pCur->eState!=CURSOR_VALID; + assert( EIGHT_BYTE_ALIGNMENT(pCur) + || pCur==sqlite3BtreeFakeValidCursor() ); + assert( offsetof(BtCursor, eState)==0 ); + assert( sizeof(pCur->eState)==1 ); + return CURSOR_VALID != *(u8*)pCur; } /* +** Return a pointer to a fake BtCursor object that will always answer +** false to the sqlite3BtreeCursorHasMoved() routine above. The fake +** cursor returned must not be used with any other Btree interface. +*/ +SQLITE_PRIVATE BtCursor *sqlite3BtreeFakeValidCursor(void){ + static u8 fakeCursor = CURSOR_VALID; + assert( offsetof(BtCursor, eState)==0 ); + return (BtCursor*)&fakeCursor; +} + +/* ** This routine restores a cursor back to its original position after it ** has been moved by some outside activity (such as a btree rebalance or ** a row having been deleted out from under the cursor). @@ -60947,8 +64368,11 @@ int sz2 = 0; int sz = get2byte(&data[iFree+2]); int top = get2byte(&data[hdr+5]); + if( top>=iFree ){ + return SQLITE_CORRUPT_PAGE(pPage); + } if( iFree2 ){ - if( iFree+sz>iFree2 ) return SQLITE_CORRUPT_PGNO(pPage->pgno); + assert( iFree+sz<=iFree2 ); /* Verified by pageFindSlot() */ sz2 = get2byte(&data[iFree2+2]); assert( iFree+sz+sz2+iFree2-(iFree+sz) <= usableSize ); memmove(&data[iFree+sz+sz2], &data[iFree+sz], iFree2-(iFree+sz)); @@ -60979,13 +64403,13 @@ ** if PRAGMA cell_size_check=ON. */ if( pciCellLast ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } assert( pc>=iCellFirst && pc<=iCellLast ); size = pPage->xCellSize(pPage, &src[pc]); cbrk -= size; if( cbrkusableSize ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } assert( cbrk+size<=usableSize && cbrk>=iCellFirst ); testcase( cbrk+size==usableSize ); @@ -61005,7 +64429,7 @@ defragment_out: if( data[hdr+7]+cbrk-iCellFirst!=pPage->nFree ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } assert( cbrk>=iCellFirst ); put2byte(&data[hdr+5], cbrk); @@ -61037,16 +64461,10 @@ int pc = get2byte(&aData[iAddr]); int x; int usableSize = pPg->pBt->usableSize; + int size; /* Size of the free slot */ assert( pc>0 ); - do{ - int size; /* Size of the free slot */ - /* EVIDENCE-OF: R-06866-39125 Freeblocks are always connected in order of - ** increasing offset. */ - if( pc>usableSize-4 || pcpgno); - return 0; - } + while( pc<=usableSize-4 ){ /* EVIDENCE-OF: R-22710-53328 The third and fourth bytes of each ** freeblock form a big-endian integer which is the size of the freeblock ** in bytes, including the 4-byte header. */ @@ -61054,8 +64472,8 @@ if( (x = size - nByte)>=0 ){ testcase( x==4 ); testcase( x==3 ); - if( pc < pPg->cellOffset+2*pPg->nCell || size+pc > usableSize ){ - *pRc = SQLITE_CORRUPT_PGNO(pPg->pgno); + if( size+pc > usableSize ){ + *pRc = SQLITE_CORRUPT_PAGE(pPg); return 0; }else if( x<4 ){ /* EVIDENCE-OF: R-11498-58022 In a well-formed b-tree page, the total @@ -61075,7 +64493,11 @@ } iAddr = pc; pc = get2byte(&aData[pc]); - }while( pc ); + if( pcpBt->usableSize==65536 ){ top = 65536; }else{ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } } @@ -61189,7 +64611,7 @@ u8 hdr; /* Page header size. 0 or 100 */ u8 nFrag = 0; /* Reduction in fragmentation */ u16 iOrigSize = iSize; /* Original value of iSize */ - u32 iLast = pPage->pBt->usableSize-4; /* Largest possible freeblock offset */ + u16 x; /* Offset to cell content area */ u32 iEnd = iStart + iSize; /* First byte past the iStart buffer */ unsigned char *data = pPage->aData; /* Page content */ @@ -61199,14 +64621,8 @@ assert( CORRUPT_DB || iEnd <= pPage->pBt->usableSize ); assert( sqlite3_mutex_held(pPage->pBt->mutex) ); assert( iSize>=4 ); /* Minimum cell size is 4 */ - assert( iStart<=iLast ); + assert( iStart<=pPage->pBt->usableSize-4 ); - /* Overwrite deleted information with zeros when the secure_delete - ** option is enabled */ - if( pPage->pBt->btsFlags & BTS_FAST_SECURE ){ - memset(&data[iStart], 0, iSize); - } - /* The list of freeblocks must be in ascending order. Find the ** spot on the list where iStart should be inserted. */ @@ -61218,11 +64634,13 @@ while( (iFreeBlk = get2byte(&data[iPtr]))pgno); + return SQLITE_CORRUPT_PAGE(pPage); } iPtr = iFreeBlk; } - if( iFreeBlk>iLast ) return SQLITE_CORRUPT_PGNO(pPage->pgno); + if( iFreeBlk>pPage->pBt->usableSize-4 ){ + return SQLITE_CORRUPT_PAGE(pPage); + } assert( iFreeBlk>iPtr || iFreeBlk==0 ); /* At this point: @@ -61233,10 +64651,10 @@ */ if( iFreeBlk && iEnd+3>=iFreeBlk ){ nFrag = iFreeBlk - iEnd; - if( iEnd>iFreeBlk ) return SQLITE_CORRUPT_PGNO(pPage->pgno); + if( iEnd>iFreeBlk ) return SQLITE_CORRUPT_PAGE(pPage); iEnd = iFreeBlk + get2byte(&data[iFreeBlk+2]); if( iEnd > pPage->pBt->usableSize ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } iSize = iEnd - iStart; iFreeBlk = get2byte(&data[iFreeBlk]); @@ -61249,28 +64667,34 @@ if( iPtr>hdr+1 ){ int iPtrEnd = iPtr + get2byte(&data[iPtr+2]); if( iPtrEnd+3>=iStart ){ - if( iPtrEnd>iStart ) return SQLITE_CORRUPT_PGNO(pPage->pgno); + if( iPtrEnd>iStart ) return SQLITE_CORRUPT_PAGE(pPage); nFrag += iStart - iPtrEnd; iSize = iEnd - iPtr; iStart = iPtr; } } - if( nFrag>data[hdr+7] ) return SQLITE_CORRUPT_PGNO(pPage->pgno); + if( nFrag>data[hdr+7] ) return SQLITE_CORRUPT_PAGE(pPage); data[hdr+7] -= nFrag; } - if( iStart==get2byte(&data[hdr+5]) ){ + x = get2byte(&data[hdr+5]); + if( iStart<=x ){ /* The new freeblock is at the beginning of the cell content area, ** so just extend the cell content area rather than create another ** freelist entry */ - if( iPtr!=hdr+1 ) return SQLITE_CORRUPT_PGNO(pPage->pgno); + if( iStartpBt->btsFlags & BTS_FAST_SECURE ){ + /* Overwrite deleted information with zeros when the secure_delete + ** option is enabled */ + memset(&data[iStart], 0, iSize); + } + put2byte(&data[iStart], iFreeBlk); + put2byte(&data[iStart+2], iSize); pPage->nFree += iOrigSize; return SQLITE_OK; } @@ -61330,7 +64754,7 @@ }else{ /* EVIDENCE-OF: R-47608-56469 Any other value for the b-tree page type is ** an error. */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } pPage->max1bytePayload = pBt->max1bytePayload; return SQLITE_OK; @@ -61371,7 +64795,7 @@ /* EVIDENCE-OF: R-28594-02890 The one-byte flag at offset 0 indicating ** the b-tree page type. */ if( decodeFlags(pPage, data[hdr]) ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } assert( pBt->pageSize>=512 && pBt->pageSize<=65536 ); pPage->maskPage = (u16)(pBt->pageSize - 1); @@ -61390,7 +64814,7 @@ pPage->nCell = get2byte(&data[hdr+3]); if( pPage->nCell>MX_CELL(pBt) ){ /* To many cells for a single page. The page must be corrupt */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } testcase( pPage->nCell==MX_CELL(pBt) ); /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only @@ -61418,12 +64842,12 @@ testcase( pc==iCellFirst ); testcase( pc==iCellLast ); if( pciCellLast ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } sz = pPage->xCellSize(pPage, &data[pc]); testcase( pc+sz==usableSize ); if( pc+sz>usableSize ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } } if( !pPage->leaf ) iCellLast++; @@ -61441,12 +64865,12 @@ /* EVIDENCE-OF: R-55530-52930 In a well-formed b-tree page, there will ** always be at least one cell before the first freeblock. */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } while( 1 ){ if( pc>iCellLast ){ /* Freeblock off the end of the page */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } next = get2byte(&data[pc]); size = get2byte(&data[pc+2]); @@ -61456,11 +64880,11 @@ } if( next>0 ){ /* Freeblock not in ascending order */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } if( pc+size>(unsigned int)usableSize ){ /* Last freeblock extends past page end */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } } @@ -61472,7 +64896,7 @@ ** area, according to the page header, lies within the page. */ if( nFree>usableSize ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } pPage->nFree = (u16)(nFree - iCellFirst); pPage->isInit = 1; @@ -61585,7 +65009,7 @@ } SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree *p){ assert( sqlite3BtreeHoldsMutex(p) ); - assert( ((p->pBt->nPage)&0x8000000)==0 ); + assert( ((p->pBt->nPage)&0x80000000)==0 ); return btreePagecount(p->pBt); } @@ -61612,7 +65036,7 @@ int rc; DbPage *pDbPage; assert( sqlite3_mutex_held(pBt->mutex) ); - assert( pCur==0 || ppPage==&pCur->apPage[pCur->iPage] ); + assert( pCur==0 || ppPage==&pCur->pPage ); assert( pCur==0 || bReadOnly==pCur->curPagerFlags ); assert( pCur==0 || pCur->iPage>0 ); @@ -61646,7 +65070,10 @@ return SQLITE_OK; getAndInitPage_error: - if( pCur ) pCur->iPage--; + if( pCur ){ + pCur->iPage--; + pCur->pPage = pCur->apPage[pCur->iPage]; + } testcase( pgno==0 ); assert( pgno!=0 || rc==SQLITE_CORRUPT ); return rc; @@ -61655,6 +65082,8 @@ /* ** Release a MemPage. This should be called once for each prior ** call to btreeGetPage. +** +** Page1 is a special case and must be released using releasePageOne(). */ static void releasePageNotNull(MemPage *pPage){ assert( pPage->aData ); @@ -61668,6 +65097,16 @@ static void releasePage(MemPage *pPage){ if( pPage ) releasePageNotNull(pPage); } +static void releasePageOne(MemPage *pPage){ + assert( pPage!=0 ); + assert( pPage->aData ); + assert( pPage->pBt ); + assert( pPage->pDbPage!=0 ); + assert( sqlite3PagerGetExtra(pPage->pDbPage) == (void*)pPage ); + assert( sqlite3PagerGetData(pPage->pDbPage)==pPage->aData ); + assert( sqlite3_mutex_held(pPage->pBt->mutex) ); + sqlite3PagerUnrefPageOne(pPage->pDbPage); +} /* ** Get an unused page. @@ -61733,7 +65172,8 @@ BtShared *pBt = (BtShared*)pArg; assert( pBt->db ); assert( sqlite3_mutex_held(pBt->db->mutex) ); - return sqlite3InvokeBusyHandler(&pBt->db->busyHandler); + return sqlite3InvokeBusyHandler(&pBt->db->busyHandler, + sqlite3PagerFile(pBt->pPager)); } /* @@ -61911,7 +65351,7 @@ } pBt->openFlags = (u8)flags; pBt->db = db; - sqlite3PagerSetBusyhandler(pBt->pPager, btreeInvokeBusyHandler, pBt); + sqlite3PagerSetBusyHandler(pBt->pPager, btreeInvokeBusyHandler, pBt); p->pBt = pBt; pBt->pCursor = 0; @@ -62452,7 +65892,8 @@ ** set to the value passed to this function as the second parameter, ** set it so. */ -#if SQLITE_DEFAULT_SYNCHRONOUS!=SQLITE_DEFAULT_WAL_SYNCHRONOUS +#if SQLITE_DEFAULT_SYNCHRONOUS!=SQLITE_DEFAULT_WAL_SYNCHRONOUS \ + && !defined(SQLITE_OMIT_WAL) static void setDefaultSyncFlag(BtShared *pBt, u8 safety_level){ sqlite3 *db; Db *pDb; @@ -62472,6 +65913,10 @@ # define setDefaultSyncFlag(pBt,safety_level) #endif +/* Forward declaration */ +static int newDatabase(BtShared*); + + /* ** Get a reference to pPage1 of the database file. This will ** also acquire a readlock on that file. @@ -62503,6 +65948,9 @@ if( nPage==0 || memcmp(24+(u8*)pPage1->aData, 92+(u8*)pPage1->aData,4)!=0 ){ nPage = nPageFile; } + if( (pBt->db->flags & SQLITE_ResetDatabase)!=0 ){ + nPage = 0; + } if( nPage>0 ){ u32 pageSize; u32 usableSize; @@ -62546,7 +65994,7 @@ }else{ setDefaultSyncFlag(pBt, SQLITE_DEFAULT_WAL_SYNCHRONOUS+1); if( isOpen==0 ){ - releasePage(pPage1); + releasePageOne(pPage1); return SQLITE_OK; } } @@ -62593,7 +66041,7 @@ ** zero and return SQLITE_OK. The caller will call this function ** again with the correct page-size. */ - releasePage(pPage1); + releasePageOne(pPage1); pBt->usableSize = usableSize; pBt->pageSize = pageSize; freeTempSpace(pBt); @@ -62601,7 +66049,7 @@ pageSize-usableSize); return rc; } - if( (pBt->db->flags & SQLITE_WriteSchema)==0 && nPage>nPageFile ){ + if( sqlite3WritableSchema(pBt->db)==0 && nPage>nPageFile ){ rc = SQLITE_CORRUPT_BKPT; goto page1_init_failed; } @@ -62647,7 +66095,7 @@ return SQLITE_OK; page1_init_failed: - releasePage(pPage1); + releasePageOne(pPage1); pBt->pPage1 = 0; return rc; } @@ -62692,7 +66140,7 @@ assert( pPage1->aData ); assert( sqlite3PagerRefcount(pBt->pPager)==1 ); pBt->pPage1 = 0; - releasePageNotNull(pPage1); + releasePageOne(pPage1); } } @@ -62789,7 +66237,7 @@ ** when A already has a read lock, we encourage A to give up and let B ** proceed. */ -SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree *p, int wrflag){ +SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree *p, int wrflag, int *pSchemaVersion){ BtShared *pBt = p->pBt; int rc = SQLITE_OK; @@ -62805,6 +66253,12 @@ } assert( pBt->inTransaction==TRANS_WRITE || IfNotOmitAV(pBt->bDoTruncate)==0 ); + if( (p->db->flags & SQLITE_ResetDatabase) + && sqlite3PagerIsreadonly(pBt->pPager)==0 + ){ + pBt->btsFlags &= ~BTS_READ_ONLY; + } + /* Write transactions are not possible on a read-only database */ if( (pBt->btsFlags & BTS_READ_ONLY)!=0 && wrflag ){ rc = SQLITE_READONLY; @@ -62864,6 +66318,11 @@ rc = sqlite3PagerBegin(pBt->pPager,wrflag>1,sqlite3TempInMemory(p->db)); if( rc==SQLITE_OK ){ rc = newDatabase(pBt); + }else if( rc==SQLITE_BUSY_SNAPSHOT && pBt->inTransaction==TRANS_NONE ){ + /* if there was no transaction opened when this function was + ** called and SQLITE_BUSY_SNAPSHOT is returned, change the error + ** code to SQLITE_BUSY. */ + rc = SQLITE_BUSY; } } } @@ -62873,6 +66332,7 @@ } }while( (rc&0xFF)==SQLITE_BUSY && pBt->inTransaction==TRANS_NONE && btreeInvokeBusyHandler(pBt) ); + sqlite3PagerResetLockTimeout(pBt->pPager); if( rc==SQLITE_OK ){ if( p->inTrans==TRANS_NONE ){ @@ -62914,14 +66374,18 @@ } } - trans_begun: - if( rc==SQLITE_OK && wrflag ){ - /* This call makes sure that the pager has the correct number of - ** open savepoints. If the second parameter is greater than 0 and - ** the sub-journal is not already open, then it will be opened here. - */ - rc = sqlite3PagerOpenSavepoint(pBt->pPager, p->db->nSavepoint); + if( rc==SQLITE_OK ){ + if( pSchemaVersion ){ + *pSchemaVersion = get4byte(&pBt->pPage1->aData[40]); + } + if( wrflag ){ + /* This call makes sure that the pager has the correct number of + ** open savepoints. If the second parameter is greater than 0 and + ** the sub-journal is not already open, then it will be opened here. + */ + rc = sqlite3PagerOpenSavepoint(pBt->pPager, p->db->nSavepoint); + } } btreeIntegrity(p); @@ -62987,7 +66451,7 @@ if( eType==PTRMAP_OVERFLOW2 ){ /* The pointer is always the first 4 bytes of the page in this case. */ if( get4byte(pPage->aData)!=iFrom ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } put4byte(pPage->aData, iTo); }else{ @@ -63006,7 +66470,7 @@ pPage->xParseCell(pPage, pCell, &info); if( info.nLocal pPage->aData+pPage->pBt->usableSize ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } if( iFrom==get4byte(pCell+info.nSize-4) ){ put4byte(pCell+info.nSize-4, iTo); @@ -63024,7 +66488,7 @@ if( i==nCell ){ if( eType!=PTRMAP_BTREE || get4byte(&pPage->aData[pPage->hdrOffset+8])!=iFrom ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } put4byte(&pPage->aData[pPage->hdrOffset+8], iTo); } @@ -63059,6 +66523,7 @@ eType==PTRMAP_BTREE || eType==PTRMAP_ROOTPAGE ); assert( sqlite3_mutex_held(pBt->mutex) ); assert( pDbPage->pBt==pBt ); + if( iDbPage<3 ) return SQLITE_CORRUPT_BKPT; /* Move page iDbPage from its current location to page number iFreePage */ TRACE(("AUTOVACUUM: Moving %d to free page %d (ptr page %d type %d)\n", @@ -63544,7 +67009,6 @@ if( pBtree ){ sqlite3BtreeEnter(pBtree); for(p=pBtree->pBt->pCursor; p; p=p->pNext){ - int i; if( writeOnly && (p->curFlags & BTCF_WriteFlag)==0 ){ if( p->eState==CURSOR_VALID || p->eState==CURSOR_SKIPNEXT ){ rc = saveCursorPosition(p); @@ -63558,10 +67022,7 @@ p->eState = CURSOR_FAULT; p->skipNext = errCode; } - for(i=0; i<=p->iPage; i++){ - releasePage(p->apPage[i]); - p->apPage[i] = 0; - } + btreeReleaseAllCursorPages(p); } sqlite3BtreeLeave(pBtree); } @@ -63618,7 +67079,7 @@ if( nPage==0 ) sqlite3PagerPagecount(pBt->pPager, &nPage); testcase( pBt->nPage!=nPage ); pBt->nPage = nPage; - releasePage(pPage1); + releasePageOne(pPage1); } assert( countValidCursors(pBt, 1)==0 ); pBt->inTransaction = TRANS_READ; @@ -63850,7 +67311,7 @@ ** of run-time by skipping the initialization of those elements. */ SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor *p){ - memset(p, 0, offsetof(BtCursor, iPage)); + memset(p, 0, offsetof(BtCursor, BTCURSOR_FIRST_UNINIT)); } /* @@ -63860,10 +67321,8 @@ SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){ Btree *pBtree = pCur->pBtree; if( pBtree ){ - int i; BtShared *pBt = pCur->pBt; sqlite3BtreeEnter(pBtree); - sqlite3BtreeClearCursor(pCur); assert( pBt->pCursor!=0 ); if( pBt->pCursor==pCur ){ pBt->pCursor = pCur->pNext; @@ -63877,12 +67336,10 @@ pPrev = pPrev->pNext; }while( ALWAYS(pPrev) ); } - for(i=0; i<=pCur->iPage; i++){ - releasePage(pCur->apPage[i]); - } + btreeReleaseAllCursorPages(pCur); unlockBtreeIfUnused(pBt); sqlite3_free(pCur->aOverflow); - /* sqlite3_free(pCur); */ + sqlite3_free(pCur->pKey); sqlite3BtreeLeave(pBtree); } return SQLITE_OK; @@ -63897,12 +67354,19 @@ ** Using this cache reduces the number of calls to btreeParseCell(). */ #ifndef NDEBUG + static int cellInfoEqual(CellInfo *a, CellInfo *b){ + if( a->nKey!=b->nKey ) return 0; + if( a->pPayload!=b->pPayload ) return 0; + if( a->nPayload!=b->nPayload ) return 0; + if( a->nLocal!=b->nLocal ) return 0; + if( a->nSize!=b->nSize ) return 0; + return 1; + } static void assertCellInfo(BtCursor *pCur){ CellInfo info; - int iPage = pCur->iPage; memset(&info, 0, sizeof(info)); - btreeParseCell(pCur->apPage[iPage], pCur->ix, &info); - assert( CORRUPT_DB || memcmp(&info, &pCur->info, sizeof(info))==0 ); + btreeParseCell(pCur->pPage, pCur->ix, &info); + assert( CORRUPT_DB || cellInfoEqual(&info, &pCur->info) ); } #else #define assertCellInfo(x) @@ -63909,9 +67373,8 @@ #endif static SQLITE_NOINLINE void getCellInfo(BtCursor *pCur){ if( pCur->info.nSize==0 ){ - int iPage = pCur->iPage; pCur->curFlags |= BTCF_ValidNKey; - btreeParseCell(pCur->apPage[iPage],pCur->ix,&pCur->info); + btreeParseCell(pCur->pPage,pCur->ix,&pCur->info); }else{ assertCellInfo(pCur); } @@ -63946,7 +67409,21 @@ return pCur->info.nKey; } +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC /* +** Return the offset into the database file for the start of the +** payload to which the cursor is pointing. +*/ +SQLITE_PRIVATE i64 sqlite3BtreeOffset(BtCursor *pCur){ + assert( cursorHoldsMutex(pCur) ); + assert( pCur->eState==CURSOR_VALID ); + getCellInfo(pCur); + return (i64)pCur->pBt->pageSize*((i64)pCur->pPage->pgno - 1) + + (i64)(pCur->info.pPayload - pCur->pPage->aData); +} +#endif /* SQLITE_ENABLE_OFFSET_SQL_FUNC */ + +/* ** Return the number of bytes of payload for the entry that pCur is ** currently pointing to. For table btrees, this will be the amount ** of data. For index btrees, this will be the size of the key. @@ -64109,7 +67586,7 @@ unsigned char *aPayload; int rc = SQLITE_OK; int iIdx = 0; - MemPage *pPage = pCur->apPage[pCur->iPage]; /* Btree page of current entry */ + MemPage *pPage = pCur->pPage; /* Btree page of current entry */ BtShared *pBt = pCur->pBt; /* Btree this cursor belongs to */ #ifdef SQLITE_DIRECT_OVERFLOW_READ unsigned char * const pBufStart = pBuf; /* Start of original out buffer */ @@ -64132,7 +67609,7 @@ ** &aPayload[pCur->info.nLocal] > &pPage->aData[pBt->usableSize] ** but is recast into its current form to avoid integer overflow problems */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } /* Check if data must be read/written to/from the btree page itself. */ @@ -64165,7 +67642,9 @@ */ if( (pCur->curFlags & BTCF_ValidOvfl)==0 ){ int nOvfl = (pCur->info.nPayload-pCur->info.nLocal+ovflSize-1)/ovflSize; - if( nOvfl>pCur->nOvflAlloc ){ + if( pCur->aOverflow==0 + || nOvfl*(int)sizeof(Pgno) > sqlite3MallocSize(pCur->aOverflow) + ){ Pgno *aNew = (Pgno*)sqlite3Realloc( pCur->aOverflow, nOvfl*2*sizeof(Pgno) ); @@ -64172,7 +67651,6 @@ if( aNew==0 ){ return SQLITE_NOMEM_BKPT; }else{ - pCur->nOvflAlloc = nOvfl*2; pCur->aOverflow = aNew; } } @@ -64217,9 +67695,6 @@ /* Need to read this page properly. It contains some of the ** range of data that is being read (eOp==0) or written (eOp!=0). */ -#ifdef SQLITE_DIRECT_OVERFLOW_READ - sqlite3_file *fd; /* File from which to do direct overflow read */ -#endif int a = amt; if( a + offset > ovflSize ){ a = ovflSize - offset; @@ -64230,7 +67705,7 @@ ** ** 1) this is a read operation, and ** 2) data is required from the start of this overflow page, and - ** 3) there is no open write-transaction, and + ** 3) there are no dirty pages in the page-cache ** 4) the database is file-backed, and ** 5) the page is not in the WAL file ** 6) at least 4 bytes have already been read into the output buffer @@ -64241,11 +67716,10 @@ */ if( eOp==0 /* (1) */ && offset==0 /* (2) */ - && pBt->inTransaction==TRANS_READ /* (3) */ - && (fd = sqlite3PagerFile(pBt->pPager))->pMethods /* (4) */ - && 0==sqlite3PagerUseWal(pBt->pPager, nextPage) /* (5) */ + && sqlite3PagerDirectReadOk(pBt->pPager, nextPage) /* (3,4,5) */ && &pBuf[-4]>=pBufStart /* (6) */ ){ + sqlite3_file *fd = sqlite3PagerFile(pBt->pPager); u8 aSave[4]; u8 *aWrite = &pBuf[-4]; assert( aWrite>=pBufStart ); /* due to (6) */ @@ -64280,7 +67754,7 @@ if( rc==SQLITE_OK && amt>0 ){ /* Overflow chain ends prematurely */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } return rc; } @@ -64305,8 +67779,8 @@ SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){ assert( cursorHoldsMutex(pCur) ); assert( pCur->eState==CURSOR_VALID ); - assert( pCur->iPage>=0 && pCur->apPage[pCur->iPage] ); - assert( pCur->ixapPage[pCur->iPage]->nCell ); + assert( pCur->iPage>=0 && pCur->pPage ); + assert( pCur->ixpPage->nCell ); return accessPayload(pCur, offset, amt, (unsigned char*)pBuf, 0); } @@ -64363,18 +67837,23 @@ BtCursor *pCur, /* Cursor pointing to entry to read from */ u32 *pAmt /* Write the number of available bytes here */ ){ - u32 amt; - assert( pCur!=0 && pCur->iPage>=0 && pCur->apPage[pCur->iPage]); + int amt; + assert( pCur!=0 && pCur->iPage>=0 && pCur->pPage); assert( pCur->eState==CURSOR_VALID ); assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); assert( cursorOwnsBtShared(pCur) ); - assert( pCur->ixapPage[pCur->iPage]->nCell ); + assert( pCur->ixpPage->nCell ); assert( pCur->info.nSize>0 ); - assert( pCur->info.pPayload>pCur->apPage[pCur->iPage]->aData || CORRUPT_DB ); - assert( pCur->info.pPayloadapPage[pCur->iPage]->aDataEnd ||CORRUPT_DB); - amt = (int)(pCur->apPage[pCur->iPage]->aDataEnd - pCur->info.pPayload); - if( pCur->info.nLocalinfo.nLocal; - *pAmt = amt; + assert( pCur->info.pPayload>pCur->pPage->aData || CORRUPT_DB ); + assert( pCur->info.pPayloadpPage->aDataEnd ||CORRUPT_DB); + amt = pCur->info.nLocal; + if( amt>(int)(pCur->pPage->aDataEnd - pCur->info.pPayload) ){ + /* There is too little space on the page for the expected amount + ** of local content. Database must be corrupt. */ + assert( CORRUPT_DB ); + amt = MAX(0, (int)(pCur->pPage->aDataEnd - pCur->info.pPayload)); + } + *pAmt = (u32)amt; return (void*)pCur->info.pPayload; } @@ -64419,10 +67898,11 @@ } pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); - pCur->aiIdx[pCur->iPage++] = pCur->ix; + pCur->aiIdx[pCur->iPage] = pCur->ix; + pCur->apPage[pCur->iPage] = pCur->pPage; pCur->ix = 0; - return getAndInitPage(pBt, newPgno, &pCur->apPage[pCur->iPage], - pCur, pCur->curPagerFlags); + pCur->iPage++; + return getAndInitPage(pBt, newPgno, &pCur->pPage, pCur, pCur->curPagerFlags); } #ifdef SQLITE_DEBUG @@ -64456,20 +67936,23 @@ ** the largest cell index. */ static void moveToParent(BtCursor *pCur){ + MemPage *pLeaf; assert( cursorOwnsBtShared(pCur) ); assert( pCur->eState==CURSOR_VALID ); assert( pCur->iPage>0 ); - assert( pCur->apPage[pCur->iPage] ); + assert( pCur->pPage ); assertParentIndex( pCur->apPage[pCur->iPage-1], pCur->aiIdx[pCur->iPage-1], - pCur->apPage[pCur->iPage]->pgno + pCur->pPage->pgno ); testcase( pCur->aiIdx[pCur->iPage-1] > pCur->apPage[pCur->iPage-1]->nCell ); pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); pCur->ix = pCur->aiIdx[pCur->iPage-1]; - releasePageNotNull(pCur->apPage[pCur->iPage--]); + pLeaf = pCur->pPage; + pCur->pPage = pCur->apPage[--pCur->iPage]; + releasePageNotNull(pLeaf); } /* @@ -64481,9 +67964,9 @@ ** single child page. This can only happen with the table rooted at page 1. ** ** If the b-tree structure is empty, the cursor state is set to -** CURSOR_INVALID. Otherwise, the cursor is set to point to the first -** cell located on the root (or virtual root) page and the cursor state -** is set to CURSOR_VALID. +** CURSOR_INVALID and this routine returns SQLITE_EMPTY. Otherwise, +** the cursor is set to point to the first cell located on the root +** (or virtual root) page and the cursor state is set to CURSOR_VALID. ** ** If this function returns successfully, it may be assumed that the ** page-header flags indicate that the [virtual] root-page is the expected @@ -64501,37 +67984,40 @@ assert( CURSOR_INVALID < CURSOR_REQUIRESEEK ); assert( CURSOR_VALID < CURSOR_REQUIRESEEK ); assert( CURSOR_FAULT > CURSOR_REQUIRESEEK ); - if( pCur->eState>=CURSOR_REQUIRESEEK ){ - if( pCur->eState==CURSOR_FAULT ){ - assert( pCur->skipNext!=SQLITE_OK ); - return pCur->skipNext; - } - sqlite3BtreeClearCursor(pCur); - } + assert( pCur->eState < CURSOR_REQUIRESEEK || pCur->iPage<0 ); + assert( pCur->pgnoRoot>0 || pCur->iPage<0 ); if( pCur->iPage>=0 ){ if( pCur->iPage ){ - do{ - assert( pCur->apPage[pCur->iPage]!=0 ); - releasePageNotNull(pCur->apPage[pCur->iPage--]); - }while( pCur->iPage); + releasePageNotNull(pCur->pPage); + while( --pCur->iPage ){ + releasePageNotNull(pCur->apPage[pCur->iPage]); + } + pCur->pPage = pCur->apPage[0]; goto skip_init; } }else if( pCur->pgnoRoot==0 ){ pCur->eState = CURSOR_INVALID; - return SQLITE_OK; + return SQLITE_EMPTY; }else{ assert( pCur->iPage==(-1) ); - rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->apPage[0], + if( pCur->eState>=CURSOR_REQUIRESEEK ){ + if( pCur->eState==CURSOR_FAULT ){ + assert( pCur->skipNext!=SQLITE_OK ); + return pCur->skipNext; + } + sqlite3BtreeClearCursor(pCur); + } + rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->pPage, 0, pCur->curPagerFlags); if( rc!=SQLITE_OK ){ pCur->eState = CURSOR_INVALID; - return rc; + return rc; } pCur->iPage = 0; - pCur->curIntKey = pCur->apPage[0]->intKey; + pCur->curIntKey = pCur->pPage->intKey; } - pRoot = pCur->apPage[0]; + pRoot = pCur->pPage; assert( pRoot->pgno==pCur->pgnoRoot ); /* If pCur->pKeyInfo is not NULL, then the caller that opened this cursor @@ -64546,7 +68032,7 @@ ** (or the freelist). */ assert( pRoot->intKey==1 || pRoot->intKey==0 ); if( pRoot->isInit==0 || (pCur->pKeyInfo==0)!=pRoot->intKey ){ - return SQLITE_CORRUPT_PGNO(pCur->apPage[pCur->iPage]->pgno); + return SQLITE_CORRUPT_PAGE(pCur->pPage); } skip_init: @@ -64554,7 +68040,7 @@ pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidNKey|BTCF_ValidOvfl); - pRoot = pCur->apPage[0]; + pRoot = pCur->pPage; if( pRoot->nCell>0 ){ pCur->eState = CURSOR_VALID; }else if( !pRoot->leaf ){ @@ -64565,6 +68051,7 @@ rc = moveToChild(pCur, subpage); }else{ pCur->eState = CURSOR_INVALID; + rc = SQLITE_EMPTY; } return rc; } @@ -64583,7 +68070,7 @@ assert( cursorOwnsBtShared(pCur) ); assert( pCur->eState==CURSOR_VALID ); - while( rc==SQLITE_OK && !(pPage = pCur->apPage[pCur->iPage])->leaf ){ + while( rc==SQLITE_OK && !(pPage = pCur->pPage)->leaf ){ assert( pCur->ixnCell ); pgno = get4byte(findCell(pPage, pCur->ix)); rc = moveToChild(pCur, pgno); @@ -64608,7 +68095,7 @@ assert( cursorOwnsBtShared(pCur) ); assert( pCur->eState==CURSOR_VALID ); - while( !(pPage = pCur->apPage[pCur->iPage])->leaf ){ + while( !(pPage = pCur->pPage)->leaf ){ pgno = get4byte(&pPage->aData[pPage->hdrOffset+8]); pCur->ix = pPage->nCell; rc = moveToChild(pCur, pgno); @@ -64631,18 +68118,34 @@ assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); rc = moveToRoot(pCur); if( rc==SQLITE_OK ){ - if( pCur->eState==CURSOR_INVALID ){ - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 ); - *pRes = 1; - }else{ - assert( pCur->apPage[pCur->iPage]->nCell>0 ); - *pRes = 0; - rc = moveToLeftmost(pCur); - } + assert( pCur->pPage->nCell>0 ); + *pRes = 0; + rc = moveToLeftmost(pCur); + }else if( rc==SQLITE_EMPTY ){ + assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 ); + *pRes = 1; + rc = SQLITE_OK; } return rc; } +/* +** This function is a no-op if cursor pCur does not point to a valid row. +** Otherwise, if pCur is valid, configure it so that the next call to +** sqlite3BtreeNext() is a no-op. +*/ +#ifndef SQLITE_OMIT_WINDOWFUNC +SQLITE_PRIVATE void sqlite3BtreeSkipNext(BtCursor *pCur){ + /* We believe that the cursor must always be in the valid state when + ** this routine is called, but the proof is difficult, so we add an + ** ALWaYS() test just in case we are wrong. */ + if( ALWAYS(pCur->eState==CURSOR_VALID) ){ + pCur->eState = CURSOR_SKIPNEXT; + pCur->skipNext = 1; + } +} +#endif /* SQLITE_OMIT_WINDOWFUNC */ + /* Move the cursor to the last entry in the table. Return SQLITE_OK ** on success. Set *pRes to 0 if the cursor actually points to something ** or set *pRes to 1 if the table is empty. @@ -64662,8 +68165,8 @@ for(ii=0; iiiPage; ii++){ assert( pCur->aiIdx[ii]==pCur->apPage[ii]->nCell ); } - assert( pCur->ix==pCur->apPage[pCur->iPage]->nCell-1 ); - assert( pCur->apPage[pCur->iPage]->leaf ); + assert( pCur->ix==pCur->pPage->nCell-1 ); + assert( pCur->pPage->leaf ); #endif return SQLITE_OK; } @@ -64670,20 +68173,18 @@ rc = moveToRoot(pCur); if( rc==SQLITE_OK ){ - if( CURSOR_INVALID==pCur->eState ){ - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 ); - *pRes = 1; + assert( pCur->eState==CURSOR_VALID ); + *pRes = 0; + rc = moveToRightmost(pCur); + if( rc==SQLITE_OK ){ + pCur->curFlags |= BTCF_AtLast; }else{ - assert( pCur->eState==CURSOR_VALID ); - *pRes = 0; - rc = moveToRightmost(pCur); - if( rc==SQLITE_OK ){ - pCur->curFlags |= BTCF_AtLast; - }else{ - pCur->curFlags &= ~BTCF_AtLast; - } - + pCur->curFlags &= ~BTCF_AtLast; } + }else if( rc==SQLITE_EMPTY ){ + assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 ); + *pRes = 1; + rc = SQLITE_OK; } return rc; } @@ -64782,22 +68283,23 @@ rc = moveToRoot(pCur); if( rc ){ + if( rc==SQLITE_EMPTY ){ + assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 ); + *pRes = -1; + return SQLITE_OK; + } return rc; } - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage] ); - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->isInit ); - assert( pCur->eState==CURSOR_INVALID || pCur->apPage[pCur->iPage]->nCell>0 ); - if( pCur->eState==CURSOR_INVALID ){ - *pRes = -1; - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 ); - return SQLITE_OK; - } - assert( pCur->apPage[0]->intKey==pCur->curIntKey ); + assert( pCur->pPage ); + assert( pCur->pPage->isInit ); + assert( pCur->eState==CURSOR_VALID ); + assert( pCur->pPage->nCell > 0 ); + assert( pCur->iPage==0 || pCur->apPage[0]->intKey==pCur->curIntKey ); assert( pCur->curIntKey || pIdxKey ); for(;;){ int lwr, upr, idx, c; Pgno chldPg; - MemPage *pPage = pCur->apPage[pCur->iPage]; + MemPage *pPage = pCur->pPage; u8 *pCell; /* Pointer to current cell in pPage */ /* pPage->nCell must be greater than zero. If this is the root-page @@ -64820,7 +68322,7 @@ if( pPage->intKeyLeaf ){ while( 0x80 <= *(pCell++) ){ if( pCell>=pPage->aDataEnd ){ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } } } @@ -64894,7 +68396,7 @@ testcase( nCell==1 ); /* Invalid key size: 0x80 0x80 0x01 */ testcase( nCell==2 ); /* Minimum legal index key size */ if( nCell<2 ){ - rc = SQLITE_CORRUPT_PGNO(pPage->pgno); + rc = SQLITE_CORRUPT_PAGE(pPage); goto moveto_finish; } pCellKey = sqlite3Malloc( nCell+18 ); @@ -64925,7 +68427,7 @@ *pRes = 0; rc = SQLITE_OK; pCur->ix = (u16)idx; - if( pIdxKey->errCode ) rc = SQLITE_CORRUPT; + if( pIdxKey->errCode ) rc = SQLITE_CORRUPT_BKPT; goto moveto_finish; } if( lwr>upr ) break; @@ -64936,7 +68438,7 @@ assert( lwr==upr+1 || (pPage->intKey && !pPage->leaf) ); assert( pPage->isInit ); if( pPage->leaf ){ - assert( pCur->ixapPage[pCur->iPage]->nCell ); + assert( pCur->ixpPage->nCell ); pCur->ix = (u16)idx; *pRes = c; rc = SQLITE_OK; @@ -64990,9 +68492,10 @@ ** opcode, and it that case the cursor will always be valid and ** will always point to a leaf node. */ if( NEVER(pCur->eState!=CURSOR_VALID) ) return -1; - if( NEVER(pCur->apPage[pCur->iPage]->leaf==0) ) return -1; + if( NEVER(pCur->pPage->leaf==0) ) return -1; - for(n=1, i=0; i<=pCur->iPage; i++){ + n = pCur->pPage->nCell; + for(i=0; iiPage; i++){ n *= pCur->apPage[i]->nCell; } return n; @@ -65045,9 +68548,18 @@ } } - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; idx = ++pCur->ix; - assert( pPage->isInit ); + if( !pPage->isInit ){ + /* The only known way for this to happen is for there to be a + ** recursive SQL function that does a DELETE operation as part of a + ** SELECT which deletes content out from under an active cursor + ** in a corrupt database file where the table being DELETE-ed from + ** has pages in common with the table being queried. See TH3 + ** module cov1/btree78.test testcase 220 (2018-06-08) for an + ** example. */ + return SQLITE_CORRUPT_BKPT; + } /* If the database file is corrupt, it is possible for the value of idx ** to be invalid here. This can only occur if a second cursor modifies @@ -65068,7 +68580,7 @@ return SQLITE_DONE; } moveToParent(pCur); - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; }while( pCur->ix>=pPage->nCell ); if( pPage->intKey ){ return sqlite3BtreeNext(pCur, 0); @@ -65091,7 +68603,7 @@ pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); if( pCur->eState!=CURSOR_VALID ) return btreeNext(pCur); - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; if( (++pCur->ix)>=pPage->nCell ){ pCur->ix--; return btreeNext(pCur); @@ -65150,7 +68662,7 @@ } } - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; assert( pPage->isInit ); if( !pPage->leaf ){ int idx = pCur->ix; @@ -65169,7 +68681,7 @@ assert( (pCur->curFlags & (BTCF_ValidOvfl))==0 ); pCur->ix--; - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; if( pPage->intKey && !pPage->leaf ){ rc = sqlite3BtreePrevious(pCur, 0); }else{ @@ -65187,7 +68699,7 @@ pCur->info.nSize = 0; if( pCur->eState!=CURSOR_VALID || pCur->ix==0 - || pCur->apPage[pCur->iPage]->leaf==0 + || pCur->pPage->leaf==0 ){ return btreePrevious(pCur); } @@ -65674,9 +69186,8 @@ } /* -** Free any overflow pages associated with the given Cell. Write the -** local Cell size (the number of bytes on the original page, omitting -** overflow) into *pnSize. +** Free any overflow pages associated with the given Cell. Store +** size information about the cell in pInfo. */ static int clearCell( MemPage *pPage, /* The page that contains the Cell */ @@ -65683,7 +69194,7 @@ unsigned char *pCell, /* First byte of the Cell */ CellInfo *pInfo /* Size information about the cell */ ){ - BtShared *pBt = pPage->pBt; + BtShared *pBt; Pgno ovflPgno; int rc; int nOvfl; @@ -65694,11 +69205,14 @@ if( pInfo->nLocal==pInfo->nPayload ){ return SQLITE_OK; /* No overflow pages. Return without doing anything */ } - if( pCell+pInfo->nSize-1 > pPage->aData+pPage->maskPage ){ + testcase( pCell + pInfo->nSize == pPage->aDataEnd ); + testcase( pCell + (pInfo->nSize-1) == pPage->aDataEnd ); + if( pCell + pInfo->nSize > pPage->aDataEnd ){ /* Cell extends past end of page */ - return SQLITE_CORRUPT_PGNO(pPage->pgno); + return SQLITE_CORRUPT_PAGE(pPage); } ovflPgno = get4byte(pCell + pInfo->nSize - 4); + pBt = pPage->pBt; assert( pBt->usableSize > 4 ); ovflPageSize = pBt->usableSize - 4; nOvfl = (pInfo->nPayload - pInfo->nLocal + ovflPageSize - 1)/ovflPageSize; @@ -65766,14 +69280,13 @@ ){ int nPayload; const u8 *pSrc; - int nSrc, n, rc; + int nSrc, n, rc, mn; int spaceLeft; - MemPage *pOvfl = 0; - MemPage *pToRelease = 0; + MemPage *pToRelease; unsigned char *pPrior; unsigned char *pPayload; - BtShared *pBt = pPage->pBt; - Pgno pgnoOvfl = 0; + BtShared *pBt; + Pgno pgnoOvfl; int nHeader; assert( sqlite3_mutex_held(pPage->pBt->mutex) ); @@ -65780,7 +69293,7 @@ /* pPage is not necessarily writeable since pCell might be auxiliary ** buffer space that is separate from the pPage buffer area */ - assert( pCellaData || pCell>=&pPage->aData[pBt->pageSize] + assert( pCellaData || pCell>=&pPage->aData[pPage->pBt->pageSize] || sqlite3PagerIswriteable(pPage->pDbPage) ); /* Fill in the header. */ @@ -65800,26 +69313,37 @@ } /* Fill in the payload */ + pPayload = &pCell[nHeader]; if( nPayload<=pPage->maxLocal ){ + /* This is the common case where everything fits on the btree page + ** and no overflow pages are required. */ n = nHeader + nPayload; testcase( n==3 ); testcase( n==4 ); if( n<4 ) n = 4; *pnSize = n; - spaceLeft = nPayload; - pPrior = pCell; - }else{ - int mn = pPage->minLocal; - n = mn + (nPayload - mn) % (pPage->pBt->usableSize - 4); - testcase( n==pPage->maxLocal ); - testcase( n==pPage->maxLocal+1 ); - if( n > pPage->maxLocal ) n = mn; - spaceLeft = n; - *pnSize = n + nHeader + 4; - pPrior = &pCell[nHeader+n]; + assert( nSrc<=nPayload ); + testcase( nSrcminLocal; + n = mn + (nPayload - mn) % (pPage->pBt->usableSize - 4); + testcase( n==pPage->maxLocal ); + testcase( n==pPage->maxLocal+1 ); + if( n > pPage->maxLocal ) n = mn; + spaceLeft = n; + *pnSize = n + nHeader + 4; + pPrior = &pCell[nHeader+n]; + pToRelease = 0; + pgnoOvfl = 0; + pBt = pPage->pBt; + /* At this point variables should be set as follows: ** ** nPayload Total payload size in bytes @@ -65844,8 +69368,35 @@ #endif /* Write the payload into the local Cell and any extra into overflow pages */ - while( nPayload>0 ){ + while( 1 ){ + n = nPayload; + if( n>spaceLeft ) n = spaceLeft; + + /* If pToRelease is not zero than pPayload points into the data area + ** of pToRelease. Make sure pToRelease is still writeable. */ + assert( pToRelease==0 || sqlite3PagerIswriteable(pToRelease->pDbPage) ); + + /* If pPayload is part of the data area of pPage, then make sure pPage + ** is still writeable */ + assert( pPayloadaData || pPayload>=&pPage->aData[pBt->pageSize] + || sqlite3PagerIswriteable(pPage->pDbPage) ); + + if( nSrc>=n ){ + memcpy(pPayload, pSrc, n); + }else if( nSrc>0 ){ + n = nSrc; + memcpy(pPayload, pSrc, n); + }else{ + memset(pPayload, 0, n); + } + nPayload -= n; + if( nPayload<=0 ) break; + pPayload += n; + pSrc += n; + nSrc -= n; + spaceLeft -= n; if( spaceLeft==0 ){ + MemPage *pOvfl = 0; #ifndef SQLITE_OMIT_AUTOVACUUM Pgno pgnoPtrmap = pgnoOvfl; /* Overflow page pointer-map entry page */ if( pBt->autoVacuum ){ @@ -65898,30 +69449,6 @@ pPayload = &pOvfl->aData[4]; spaceLeft = pBt->usableSize - 4; } - n = nPayload; - if( n>spaceLeft ) n = spaceLeft; - - /* If pToRelease is not zero than pPayload points into the data area - ** of pToRelease. Make sure pToRelease is still writeable. */ - assert( pToRelease==0 || sqlite3PagerIswriteable(pToRelease->pDbPage) ); - - /* If pPayload is part of the data area of pPage, then make sure pPage - ** is still writeable */ - assert( pPayloadaData || pPayload>=&pPage->aData[pBt->pageSize] - || sqlite3PagerIswriteable(pPage->pDbPage) ); - - if( nSrc>0 ){ - if( n>nSrc ) n = nSrc; - assert( pSrc ); - memcpy(pPayload, pSrc, n); - }else{ - memset(pPayload, 0, n); - } - nPayload -= n; - pPayload += n; - pSrc += n; - nSrc -= n; - spaceLeft -= n; } releasePage(pToRelease); return SQLITE_OK; @@ -65953,7 +69480,7 @@ hdr = pPage->hdrOffset; testcase( pc==get2byte(&data[hdr+5]) ); testcase( pc+sz==pPage->pBt->usableSize ); - if( pc < (u32)get2byte(&data[hdr+5]) || pc+sz > pPage->pBt->usableSize ){ + if( pc+sz > pPage->pBt->usableSize ){ *pRC = SQLITE_CORRUPT_BKPT; return; } @@ -66820,10 +70347,8 @@ + nMaxCells*sizeof(u16) /* b.szCell */ + pBt->pageSize; /* aSpace1 */ - /* EVIDENCE-OF: R-28375-38319 SQLite will never request a scratch buffer - ** that is more than 6 times the database page size. */ assert( szScratch<=6*(int)pBt->pageSize ); - b.apCell = sqlite3ScratchMalloc( szScratch ); + b.apCell = sqlite3StackAllocRaw(0, szScratch ); if( b.apCell==0 ){ rc = SQLITE_NOMEM_BKPT; goto balance_cleanup; @@ -66868,7 +70393,7 @@ } /* Load b.apCell[] with pointers to all cells in pOld. If pOld - ** constains overflow cells, include them in the b.apCell[] array + ** contains overflow cells, include them in the b.apCell[] array ** in the correct spot. ** ** Note that when there are multiple overflow cells, it is always the @@ -67401,7 +70926,7 @@ ** Cleanup before returning. */ balance_cleanup: - sqlite3ScratchFree(b.apCell); + sqlite3StackFree(0, b.apCell); for(i=0; iiPage; - MemPage *pPage = pCur->apPage[iPage]; + MemPage *pPage = pCur->pPage; if( iPage==0 ){ if( pPage->nOverflow ){ @@ -67516,7 +71041,9 @@ pCur->iPage = 1; pCur->ix = 0; pCur->aiIdx[0] = 0; - assert( pCur->apPage[1]->nOverflow ); + pCur->apPage[0] = pPage; + pCur->pPage = pCur->apPage[1]; + assert( pCur->pPage->nOverflow ); } }else{ break; @@ -67596,6 +71123,7 @@ releasePage(pPage); pCur->iPage--; assert( pCur->iPage>=0 ); + pCur->pPage = pCur->apPage[pCur->iPage]; } }while( rc==SQLITE_OK ); @@ -67605,8 +71133,96 @@ return rc; } +/* Overwrite content from pX into pDest. Only do the write if the +** content is different from what is already there. +*/ +static int btreeOverwriteContent( + MemPage *pPage, /* MemPage on which writing will occur */ + u8 *pDest, /* Pointer to the place to start writing */ + const BtreePayload *pX, /* Source of data to write */ + int iOffset, /* Offset of first byte to write */ + int iAmt /* Number of bytes to be written */ +){ + int nData = pX->nData - iOffset; + if( nData<=0 ){ + /* Overwritting with zeros */ + int i; + for(i=0; ipDbPage); + if( rc ) return rc; + memset(pDest + i, 0, iAmt - i); + } + }else{ + if( nDatapData) + iOffset, iAmt)!=0 ){ + int rc = sqlite3PagerWrite(pPage->pDbPage); + if( rc ) return rc; + memcpy(pDest, ((u8*)pX->pData) + iOffset, iAmt); + } + } + return SQLITE_OK; +} /* +** Overwrite the cell that cursor pCur is pointing to with fresh content +** contained in pX. +*/ +static int btreeOverwriteCell(BtCursor *pCur, const BtreePayload *pX){ + int iOffset; /* Next byte of pX->pData to write */ + int nTotal = pX->nData + pX->nZero; /* Total bytes of to write */ + int rc; /* Return code */ + MemPage *pPage = pCur->pPage; /* Page being written */ + BtShared *pBt; /* Btree */ + Pgno ovflPgno; /* Next overflow page to write */ + u32 ovflPageSize; /* Size to write on overflow page */ + + if( pCur->info.pPayload + pCur->info.nLocal > pPage->aDataEnd ){ + return SQLITE_CORRUPT_BKPT; + } + /* Overwrite the local portion first */ + rc = btreeOverwriteContent(pPage, pCur->info.pPayload, pX, + 0, pCur->info.nLocal); + if( rc ) return rc; + if( pCur->info.nLocal==nTotal ) return SQLITE_OK; + + /* Now overwrite the overflow pages */ + iOffset = pCur->info.nLocal; + assert( nTotal>=0 ); + assert( iOffset>=0 ); + ovflPgno = get4byte(pCur->info.pPayload + iOffset); + pBt = pPage->pBt; + ovflPageSize = pBt->usableSize - 4; + do{ + rc = btreeGetPage(pBt, ovflPgno, &pPage, 0); + if( rc ) return rc; + if( sqlite3PagerPageRefcount(pPage->pDbPage)!=1 ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + if( iOffset+ovflPageSize<(u32)nTotal ){ + ovflPgno = get4byte(pPage->aData); + }else{ + ovflPageSize = nTotal - iOffset; + } + rc = btreeOverwriteContent(pPage, pPage->aData+4, pX, + iOffset, ovflPageSize); + } + sqlite3PagerUnref(pPage->pDbPage); + if( rc ) return rc; + iOffset += ovflPageSize; + }while( iOffsetpgnoRoot, pX->nKey, 0); /* If BTREE_SAVEPOSITION is set, the cursor must already be pointing - ** to a row with the same key as the new entry being inserted. */ - assert( (flags & BTREE_SAVEPOSITION)==0 || - ((pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey==pCur->info.nKey) ); + ** to a row with the same key as the new entry being inserted. + */ +#ifdef SQLITE_DEBUG + if( flags & BTREE_SAVEPOSITION ){ + assert( pCur->curFlags & BTCF_ValidNKey ); + assert( pX->nKey==pCur->info.nKey ); + assert( pCur->info.nSize!=0 ); + assert( loc==0 ); + } +#endif - /* If the cursor is currently on the last row and we are appending a - ** new row onto the end, set the "loc" to avoid an unnecessary - ** btreeMoveto() call */ + /* On the other hand, BTREE_SAVEPOSITION==0 does not imply + ** that the cursor is not pointing to a row to be overwritten. + ** So do a complete check. + */ if( (pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey==pCur->info.nKey ){ - loc = 0; + /* The cursor is pointing to the entry that is to be + ** overwritten */ + assert( pX->nData>=0 && pX->nZero>=0 ); + if( pCur->info.nSize!=0 + && pCur->info.nPayload==(u32)pX->nData+pX->nZero + ){ + /* New entry is the same size as the old. Do an overwrite */ + return btreeOverwriteCell(pCur, pX); + } + assert( loc==0 ); }else if( loc==0 ){ + /* The cursor is *not* pointing to the cell to be overwritten, nor + ** to an adjacent cell. Move the cursor so that it is pointing either + ** to the cell to be overwritten or an adjacent cell. + */ rc = sqlite3BtreeMovetoUnpacked(pCur, 0, pX->nKey, flags!=0, &loc); if( rc ) return rc; } - }else if( loc==0 && (flags & BTREE_SAVEPOSITION)==0 ){ - if( pX->nMem ){ - UnpackedRecord r; - r.pKeyInfo = pCur->pKeyInfo; - r.aMem = pX->aMem; - r.nField = pX->nMem; - r.default_rc = 0; - r.errCode = 0; - r.r1 = 0; - r.r2 = 0; - r.eqSeen = 0; - rc = sqlite3BtreeMovetoUnpacked(pCur, &r, 0, flags!=0, &loc); - }else{ - rc = btreeMoveto(pCur, pX->pKey, pX->nKey, flags!=0, &loc); + }else{ + /* This is an index or a WITHOUT ROWID table */ + + /* If BTREE_SAVEPOSITION is set, the cursor must already be pointing + ** to a row with the same key as the new entry being inserted. + */ + assert( (flags & BTREE_SAVEPOSITION)==0 || loc==0 ); + + /* If the cursor is not already pointing either to the cell to be + ** overwritten, or if a new cell is being inserted, if the cursor is + ** not pointing to an immediately adjacent cell, then move the cursor + ** so that it does. + */ + if( loc==0 && (flags & BTREE_SAVEPOSITION)==0 ){ + if( pX->nMem ){ + UnpackedRecord r; + r.pKeyInfo = pCur->pKeyInfo; + r.aMem = pX->aMem; + r.nField = pX->nMem; + r.default_rc = 0; + r.errCode = 0; + r.r1 = 0; + r.r2 = 0; + r.eqSeen = 0; + rc = sqlite3BtreeMovetoUnpacked(pCur, &r, 0, flags!=0, &loc); + }else{ + rc = btreeMoveto(pCur, pX->pKey, pX->nKey, flags!=0, &loc); + } + if( rc ) return rc; } - if( rc ) return rc; + + /* If the cursor is currently pointing to an entry to be overwritten + ** and the new content is the same as as the old, then use the + ** overwrite optimization. + */ + if( loc==0 ){ + getCellInfo(pCur); + if( pCur->info.nKey==pX->nKey ){ + BtreePayload x2; + x2.pData = pX->pKey; + x2.nData = pX->nKey; + x2.nZero = 0; + return btreeOverwriteCell(pCur, &x2); + } + } + } assert( pCur->eState==CURSOR_VALID || (pCur->eState==CURSOR_INVALID && loc) ); - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; assert( pPage->intKey || pX->nKey>=0 ); assert( pPage->leaf || !pPage->intKey ); @@ -67814,10 +71481,10 @@ ** fails. Internal data structure corruption will result otherwise. ** Also, set the cursor state to invalid. This stops saveCursorPosition() ** from trying to save the current position of the cursor. */ - pCur->apPage[pCur->iPage]->nOverflow = 0; + pCur->pPage->nOverflow = 0; pCur->eState = CURSOR_INVALID; if( (flags & BTREE_SAVEPOSITION) && rc==SQLITE_OK ){ - rc = moveToRoot(pCur); + btreeReleaseAllCursorPages(pCur); if( pCur->pKeyInfo ){ assert( pCur->pKey==0 ); pCur->pKey = sqlite3Malloc( pX->nKey ); @@ -67831,7 +71498,7 @@ pCur->nKey = pX->nKey; } } - assert( pCur->apPage[pCur->iPage]->nOverflow==0 ); + assert( pCur->iPage<0 || pCur->pPage->nOverflow==0 ); end_insert: return rc; @@ -67872,13 +71539,13 @@ assert( pCur->curFlags & BTCF_WriteFlag ); assert( hasSharedCacheTableLock(p, pCur->pgnoRoot, pCur->pKeyInfo!=0, 2) ); assert( !hasReadConflicts(p, pCur->pgnoRoot) ); - assert( pCur->ixapPage[pCur->iPage]->nCell ); + assert( pCur->ixpPage->nCell ); assert( pCur->eState==CURSOR_VALID ); assert( (flags & ~(BTREE_SAVEPOSITION | BTREE_AUXDELETE))==0 ); iCellDepth = pCur->iPage; iCellIdx = pCur->ix; - pPage = pCur->apPage[iCellDepth]; + pPage = pCur->pPage; pCell = findCell(pPage, iCellIdx); /* If the bPreserve flag is set to true, then the cursor position must @@ -67944,11 +71611,16 @@ ** node. The cell from the leaf node needs to be moved to the internal ** node to replace the deleted cell. */ if( !pPage->leaf ){ - MemPage *pLeaf = pCur->apPage[pCur->iPage]; + MemPage *pLeaf = pCur->pPage; int nCell; - Pgno n = pCur->apPage[iCellDepth+1]->pgno; + Pgno n; unsigned char *pTmp; + if( iCellDepthiPage-1 ){ + n = pCur->apPage[iCellDepth+1]->pgno; + }else{ + n = pCur->pPage->pgno; + } pCell = findCell(pLeaf, pLeaf->nCell-1); if( pCell<&pLeaf->aData[4] ) return SQLITE_CORRUPT_BKPT; nCell = pLeaf->xCellSize(pLeaf, pCell); @@ -67980,9 +71652,12 @@ ** well. */ rc = balance(pCur); if( rc==SQLITE_OK && pCur->iPage>iCellDepth ){ + releasePageNotNull(pCur->pPage); + pCur->iPage--; while( pCur->iPage>iCellDepth ){ releasePage(pCur->apPage[pCur->iPage--]); } + pCur->pPage = pCur->apPage[pCur->iPage]; rc = balance(pCur); } @@ -67989,7 +71664,7 @@ if( rc==SQLITE_OK ){ if( bSkipnext ){ assert( bPreserve && (pCur->iPage==iCellDepth || CORRUPT_DB) ); - assert( pPage==pCur->apPage[pCur->iPage] || CORRUPT_DB ); + assert( pPage==pCur->pPage || CORRUPT_DB ); assert( (pPage->nCell>0 || CORRUPT_DB) && iCellIdx<=pPage->nCell ); pCur->eState = CURSOR_SKIPNEXT; if( iCellIdx>=pPage->nCell ){ @@ -68001,8 +71676,10 @@ }else{ rc = moveToRoot(pCur); if( bPreserve ){ + btreeReleaseAllCursorPages(pCur); pCur->eState = CURSOR_REQUIRESEEK; } + if( rc==SQLITE_EMPTY ) rc = SQLITE_OK; } } return rc; @@ -68467,11 +72144,11 @@ i64 nEntry = 0; /* Value to return in *pnEntry */ int rc; /* Return code */ - if( pCur->pgnoRoot==0 ){ + rc = moveToRoot(pCur); + if( rc==SQLITE_EMPTY ){ *pnEntry = 0; return SQLITE_OK; } - rc = moveToRoot(pCur); /* Unless an error occurs, the following loop runs one iteration for each ** page in the B-Tree structure (not including overflow pages). @@ -68484,7 +72161,7 @@ ** this page contains countable entries. Increment the entry counter ** accordingly. */ - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; if( pPage->leaf || !pPage->intKey ){ nEntry += pPage->nCell; } @@ -68507,10 +72184,10 @@ return moveToRoot(pCur); } moveToParent(pCur); - }while ( pCur->ix>=pCur->apPage[pCur->iPage]->nCell ); + }while ( pCur->ix>=pCur->pPage->nCell ); pCur->ix++; - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; } /* Descend to the child node of the cell that the cursor currently @@ -68552,14 +72229,14 @@ pCheck->nErr++; va_start(ap, zFormat); if( pCheck->errMsg.nChar ){ - sqlite3StrAccumAppend(&pCheck->errMsg, "\n", 1); + sqlite3_str_append(&pCheck->errMsg, "\n", 1); } if( pCheck->zPfx ){ - sqlite3XPrintf(&pCheck->errMsg, pCheck->zPfx, pCheck->v1, pCheck->v2); + sqlite3_str_appendf(&pCheck->errMsg, pCheck->zPfx, pCheck->v1, pCheck->v2); } - sqlite3VXPrintf(&pCheck->errMsg, zFormat, ap); + sqlite3_str_vappendf(&pCheck->errMsg, zFormat, ap); va_end(ap); - if( pCheck->errMsg.accError==STRACCUM_NOMEM ){ + if( pCheck->errMsg.accError==SQLITE_NOMEM ){ pCheck->mallocFailed = 1; } } @@ -68594,8 +72271,7 @@ ** Also check that the page number is in bounds. */ static int checkRef(IntegrityCk *pCheck, Pgno iPage){ - if( iPage==0 ) return 1; - if( iPage>pCheck->nPage ){ + if( iPage>pCheck->nPage || iPage==0 ){ checkAppendMsg(pCheck, "invalid page number %d", iPage); return 1; } @@ -68650,17 +72326,12 @@ ){ int i; int expected = N; - int iFirst = iPage; - while( N-- > 0 && pCheck->mxErr ){ + int nErrAtStart = pCheck->nErr; + while( iPage!=0 && pCheck->mxErr ){ DbPage *pOvflPage; unsigned char *pOvflData; - if( iPage<1 ){ - checkAppendMsg(pCheck, - "%d of %d pages missing from overflow list starting at %d", - N+1, expected, iFirst); - break; - } if( checkRef(pCheck, iPage) ) break; + N--; if( sqlite3PagerGet(pCheck->pPager, (Pgno)iPage, &pOvflPage, 0) ){ checkAppendMsg(pCheck, "failed to get page %d", iPage); break; @@ -68704,11 +72375,13 @@ #endif iPage = get4byte(pOvflData); sqlite3PagerUnref(pOvflPage); - - if( isFreeList && N<(iPage!=0) ){ - checkAppendMsg(pCheck, "free-page count in header is too small"); - } } + if( N && nErrAtStart==pCheck->nErr ){ + checkAppendMsg(pCheck, + "%s is %d but should be %d", + isFreeList ? "size" : "overflow list length", + expected-N, expected); + } } #endif /* SQLITE_OMIT_INTEGRITY_CHECK */ @@ -69101,6 +72774,24 @@ /* Check all the tables. */ +#ifndef SQLITE_OMIT_AUTOVACUUM + if( pBt->autoVacuum ){ + int mx = 0; + int mxInHdr; + for(i=0; (int)ipPage1->aData[52]); + if( mx!=mxInHdr ){ + checkAppendMsg(&sCheck, + "max rootpage (%d) disagrees with header (%d)", + mx, mxInHdr + ); + } + }else if( get4byte(&pBt->pPage1->aData[64])!=0 ){ + checkAppendMsg(&sCheck, + "incremental_vacuum enabled with a max rootpage of zero" + ); + } +#endif testcase( pBt->db->flags & SQLITE_CellSizeCk ); pBt->db->flags &= ~SQLITE_CellSizeCk; for(i=0; (int)ipPager) ); sqlite3BtreeLeave(p); @@ -69351,7 +73042,7 @@ && pCsr->pBt->inTransaction==TRANS_WRITE ); assert( hasSharedCacheTableLock(pCsr->pBtree, pCsr->pgnoRoot, 0, 2) ); assert( !hasReadConflicts(pCsr->pBtree, pCsr->pgnoRoot) ); - assert( pCsr->apPage[pCsr->iPage]->intKey ); + assert( pCsr->pPage->intKey ); return accessPayload(pCsr, offset, amt, (unsigned char *)z, 1); } @@ -69382,11 +73073,11 @@ pBt->btsFlags &= ~BTS_NO_WAL; if( iVersion==1 ) pBt->btsFlags |= BTS_NO_WAL; - rc = sqlite3BtreeBeginTrans(pBtree, 0); + rc = sqlite3BtreeBeginTrans(pBtree, 0, 0); if( rc==SQLITE_OK ){ u8 *aData = pBt->pPage1->aData; if( aData[18]!=(u8)iVersion || aData[19]!=(u8)iVersion ){ - rc = sqlite3BtreeBeginTrans(pBtree, 2); + rc = sqlite3BtreeBeginTrans(pBtree, 2, 0); if( rc==SQLITE_OK ){ rc = sqlite3PagerWrite(pBt->pPage1->pDbPage); if( rc==SQLITE_OK ){ @@ -69826,7 +73517,7 @@ ** before this function exits. */ if( rc==SQLITE_OK && 0==sqlite3BtreeIsInReadTrans(p->pSrc) ){ - rc = sqlite3BtreeBeginTrans(p->pSrc, 0); + rc = sqlite3BtreeBeginTrans(p->pSrc, 0, 0); bCloseTrans = 1; } @@ -69842,10 +73533,10 @@ /* Lock the destination database, if it is not locked already. */ if( SQLITE_OK==rc && p->bDestLocked==0 - && SQLITE_OK==(rc = sqlite3BtreeBeginTrans(p->pDest, 2)) + && SQLITE_OK==(rc = sqlite3BtreeBeginTrans(p->pDest, 2, + (int*)&p->iDestSchema)) ){ p->bDestLocked = 1; - sqlite3BtreeGetMeta(p->pDest, BTREE_SCHEMA_VERSION, &p->iDestSchema); } /* Do not allow backup if the destination database is in WAL mode @@ -70289,8 +73980,7 @@ if( p->flags & MEM_Null ){ /* Cannot be both MEM_Null and some other type */ - assert( (p->flags & (MEM_Int|MEM_Real|MEM_Str|MEM_Blob - |MEM_RowSet|MEM_Frame|MEM_Agg|MEM_Zero))==0 ); + assert( (p->flags & (MEM_Int|MEM_Real|MEM_Str|MEM_Blob|MEM_Agg))==0 ); /* If MEM_Null is set, then either the value is a pure NULL (the usual ** case) or it is a pointer set using sqlite3_bind_pointer() or @@ -70340,6 +74030,51 @@ } #endif +#ifdef SQLITE_DEBUG +/* +** Check that string value of pMem agrees with its integer or real value. +** +** A single int or real value always converts to the same strings. But +** many different strings can be converted into the same int or real. +** If a table contains a numeric value and an index is based on the +** corresponding string value, then it is important that the string be +** derived from the numeric value, not the other way around, to ensure +** that the index and table are consistent. See ticket +** https://www.sqlite.org/src/info/343634942dd54ab (2018-01-31) for +** an example. +** +** This routine looks at pMem to verify that if it has both a numeric +** representation and a string representation then the string rep has +** been derived from the numeric and not the other way around. It returns +** true if everything is ok and false if there is a problem. +** +** This routine is for use inside of assert() statements only. +*/ +SQLITE_PRIVATE int sqlite3VdbeMemConsistentDualRep(Mem *p){ + char zBuf[100]; + char *z; + int i, j, incr; + if( (p->flags & MEM_Str)==0 ) return 1; + if( (p->flags & (MEM_Int|MEM_Real))==0 ) return 1; + if( p->flags & MEM_Int ){ + sqlite3_snprintf(sizeof(zBuf),zBuf,"%lld",p->u.i); + }else{ + sqlite3_snprintf(sizeof(zBuf),zBuf,"%!.15g",p->u.r); + } + z = p->z; + i = j = 0; + incr = 1; + if( p->enc!=SQLITE_UTF8 ){ + incr = 2; + if( p->enc==SQLITE_UTF16BE ) z++; + } + while( zBuf[j] ){ + if( zBuf[j++]!=z[i] ) return 0; + i += incr; + } + return 1; +} +#endif /* SQLITE_DEBUG */ /* ** If pMem is an object with a valid string representation, this routine @@ -70358,7 +74093,7 @@ #ifndef SQLITE_OMIT_UTF16 int rc; #endif - assert( (pMem->flags&MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); assert( desiredEnc==SQLITE_UTF8 || desiredEnc==SQLITE_UTF16LE || desiredEnc==SQLITE_UTF16BE ); if( !(pMem->flags&MEM_Str) || pMem->enc==desiredEnc ){ @@ -70391,7 +74126,7 @@ */ SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemGrow(Mem *pMem, int n, int bPreserve){ assert( sqlite3VdbeCheckMemInvariants(pMem) ); - assert( (pMem->flags&MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); testcase( pMem->db==0 ); /* If the bPreserve flag is set to true, then the memory cell must already @@ -70402,7 +74137,7 @@ assert( pMem->szMalloc==0 || pMem->szMalloc==sqlite3DbMallocSize(pMem->db, pMem->zMalloc) ); if( n<32 ) n = 32; - if( bPreserve && pMem->szMalloc>0 && pMem->z==pMem->zMalloc ){ + if( pMem->szMalloc>0 && bPreserve && pMem->z==pMem->zMalloc ){ pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n); bPreserve = 0; }else{ @@ -70418,7 +74153,8 @@ pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->zMalloc); } - if( bPreserve && pMem->z && ALWAYS(pMem->z!=pMem->zMalloc) ){ + if( bPreserve && pMem->z ){ + assert( pMem->z!=pMem->zMalloc ); memcpy(pMem->zMalloc, pMem->z, pMem->n); } if( (pMem->flags&MEM_Dyn)!=0 ){ @@ -70457,6 +74193,20 @@ } /* +** It is already known that pMem contains an unterminated string. +** Add the zero terminator. +*/ +static SQLITE_NOINLINE int vdbeMemAddTerminator(Mem *pMem){ + if( sqlite3VdbeMemGrow(pMem, pMem->n+2, 1) ){ + return SQLITE_NOMEM_BKPT; + } + pMem->z[pMem->n] = 0; + pMem->z[pMem->n+1] = 0; + pMem->flags |= MEM_Term; + return SQLITE_OK; +} + +/* ** Change pMem so that its MEM_Str or MEM_Blob value is stored in ** MEM.zMalloc, where it can be safely written. ** @@ -70464,16 +74214,12 @@ */ SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem *pMem){ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - assert( (pMem->flags&MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); if( (pMem->flags & (MEM_Str|MEM_Blob))!=0 ){ if( ExpandBlob(pMem) ) return SQLITE_NOMEM; if( pMem->szMalloc==0 || pMem->z!=pMem->zMalloc ){ - if( sqlite3VdbeMemGrow(pMem, pMem->n + 2, 1) ){ - return SQLITE_NOMEM_BKPT; - } - pMem->z[pMem->n] = 0; - pMem->z[pMem->n+1] = 0; - pMem->flags |= MEM_Term; + int rc = vdbeMemAddTerminator(pMem); + if( rc ) return rc; } } pMem->flags &= ~MEM_Ephem; @@ -70493,7 +74239,7 @@ int nByte; assert( pMem->flags & MEM_Zero ); assert( pMem->flags&MEM_Blob ); - assert( (pMem->flags&MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); /* Set nByte to the number of bytes required to store the expanded blob. */ @@ -70513,20 +74259,6 @@ #endif /* -** It is already known that pMem contains an unterminated string. -** Add the zero terminator. -*/ -static SQLITE_NOINLINE int vdbeMemAddTerminator(Mem *pMem){ - if( sqlite3VdbeMemGrow(pMem, pMem->n+2, 1) ){ - return SQLITE_NOMEM_BKPT; - } - pMem->z[pMem->n] = 0; - pMem->z[pMem->n+1] = 0; - pMem->flags |= MEM_Term; - return SQLITE_OK; -} - -/* ** Make sure the given Mem is \u0000 terminated. */ SQLITE_PRIVATE int sqlite3VdbeMemNulTerminate(Mem *pMem){ @@ -70562,7 +74294,7 @@ assert( !(fg&MEM_Zero) ); assert( !(fg&(MEM_Str|MEM_Blob)) ); assert( fg&(MEM_Int|MEM_Real) ); - assert( (pMem->flags&MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); assert( EIGHT_BYTE_ALIGNMENT(pMem) ); @@ -70583,7 +74315,8 @@ assert( fg & MEM_Real ); sqlite3_snprintf(nByte, pMem->z, "%!.15g", pMem->u.r); } - pMem->n = sqlite3Strlen30(pMem->z); + assert( pMem->z!=0 ); + pMem->n = sqlite3Strlen30NN(pMem->z); pMem->enc = SQLITE_UTF8; pMem->flags |= MEM_Str|MEM_Term; if( bForce ) pMem->flags &= ~(MEM_Int|MEM_Real); @@ -70600,29 +74333,56 @@ ** otherwise. */ SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem *pMem, FuncDef *pFunc){ - int rc = SQLITE_OK; - if( ALWAYS(pFunc && pFunc->xFinalize) ){ - sqlite3_context ctx; - Mem t; - assert( (pMem->flags & MEM_Null)!=0 || pFunc==pMem->u.pDef ); - assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - memset(&ctx, 0, sizeof(ctx)); - memset(&t, 0, sizeof(t)); - t.flags = MEM_Null; - t.db = pMem->db; - ctx.pOut = &t; - ctx.pMem = pMem; - ctx.pFunc = pFunc; - pFunc->xFinalize(&ctx); /* IMP: R-24505-23230 */ - assert( (pMem->flags & MEM_Dyn)==0 ); - if( pMem->szMalloc>0 ) sqlite3DbFreeNN(pMem->db, pMem->zMalloc); - memcpy(pMem, &t, sizeof(t)); - rc = ctx.isError; - } - return rc; + sqlite3_context ctx; + Mem t; + assert( pFunc!=0 ); + assert( pFunc->xFinalize!=0 ); + assert( (pMem->flags & MEM_Null)!=0 || pFunc==pMem->u.pDef ); + assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); + memset(&ctx, 0, sizeof(ctx)); + memset(&t, 0, sizeof(t)); + t.flags = MEM_Null; + t.db = pMem->db; + ctx.pOut = &t; + ctx.pMem = pMem; + ctx.pFunc = pFunc; + pFunc->xFinalize(&ctx); /* IMP: R-24505-23230 */ + assert( (pMem->flags & MEM_Dyn)==0 ); + if( pMem->szMalloc>0 ) sqlite3DbFreeNN(pMem->db, pMem->zMalloc); + memcpy(pMem, &t, sizeof(t)); + return ctx.isError; } /* +** Memory cell pAccum contains the context of an aggregate function. +** This routine calls the xValue method for that function and stores +** the results in memory cell pMem. +** +** SQLITE_ERROR is returned if xValue() reports an error. SQLITE_OK +** otherwise. +*/ +#ifndef SQLITE_OMIT_WINDOWFUNC +SQLITE_PRIVATE int sqlite3VdbeMemAggValue(Mem *pAccum, Mem *pOut, FuncDef *pFunc){ + sqlite3_context ctx; + Mem t; + assert( pFunc!=0 ); + assert( pFunc->xValue!=0 ); + assert( (pAccum->flags & MEM_Null)!=0 || pFunc==pAccum->u.pDef ); + assert( pAccum->db==0 || sqlite3_mutex_held(pAccum->db->mutex) ); + memset(&ctx, 0, sizeof(ctx)); + memset(&t, 0, sizeof(t)); + t.flags = MEM_Null; + t.db = pAccum->db; + sqlite3VdbeMemSetNull(pOut); + ctx.pOut = pOut; + ctx.pMem = pAccum; + ctx.pFunc = pFunc; + pFunc->xValue(&ctx); + return ctx.isError; +} +#endif /* SQLITE_OMIT_WINDOWFUNC */ + +/* ** If the memory cell contains a value that must be freed by ** invoking the external callback in Mem.xDel, then this routine ** will free that value. It also sets Mem.flags to MEM_Null. @@ -70640,15 +74400,8 @@ testcase( p->flags & MEM_Dyn ); } if( p->flags&MEM_Dyn ){ - assert( (p->flags&MEM_RowSet)==0 ); assert( p->xDel!=SQLITE_DYNAMIC && p->xDel!=0 ); p->xDel((void *)p->z); - }else if( p->flags&MEM_RowSet ){ - sqlite3RowSetClear(p->u.pRowSet); - }else if( p->flags&MEM_Frame ){ - VdbeFrame *pFrame = p->u.pFrame; - pFrame->pParent = pFrame->v->pDelFrame; - pFrame->v->pDelFrame = pFrame; } p->flags = MEM_Null; } @@ -70780,6 +74533,16 @@ } /* +** Return 1 if pMem represents true, and return 0 if pMem represents false. +** Return the value ifNull if pMem is NULL. +*/ +SQLITE_PRIVATE int sqlite3VdbeBooleanValue(Mem *pMem, int ifNull){ + if( pMem->flags & MEM_Int ) return pMem->u.i!=0; + if( pMem->flags & MEM_Null ) return ifNull; + return sqlite3VdbeRealValue(pMem)!=0.0; +} + +/* ** The MEM structure is already a MEM_Real. Try to also make it a ** MEM_Int if we can. */ @@ -70786,7 +74549,7 @@ SQLITE_PRIVATE void sqlite3VdbeIntegerAffinity(Mem *pMem){ i64 ix; assert( pMem->flags & MEM_Real ); - assert( (pMem->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); assert( EIGHT_BYTE_ALIGNMENT(pMem) ); @@ -70813,7 +74576,7 @@ */ SQLITE_PRIVATE int sqlite3VdbeMemIntegerify(Mem *pMem){ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - assert( (pMem->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); assert( EIGHT_BYTE_ALIGNMENT(pMem) ); pMem->u.i = sqlite3VdbeIntValue(pMem); @@ -70834,6 +74597,18 @@ return SQLITE_OK; } +/* Compare a floating point value to an integer. Return true if the two +** values are the same within the precision of the floating point value. +** +** For some versions of GCC on 32-bit machines, if you do the more obvious +** comparison of "r1==(double)i" you sometimes get an answer of false even +** though the r1 and (double)i values are bit-for-bit the same. +*/ +static int sqlite3RealSameAsInt(double r1, sqlite3_int64 i){ + double r2 = (double)i; + return memcmp(&r1, &r2, sizeof(r1))==0; +} + /* ** Convert pMem so that it has types MEM_Real or MEM_Int or both. ** Invalidate any prior representations. @@ -70844,14 +74619,21 @@ */ SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem *pMem){ if( (pMem->flags & (MEM_Int|MEM_Real|MEM_Null))==0 ){ + int rc; assert( (pMem->flags & (MEM_Blob|MEM_Str))!=0 ); assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - if( 0==sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc) ){ + rc = sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc); + if( rc==0 ){ MemSetTypeFlag(pMem, MEM_Int); }else{ - pMem->u.r = sqlite3VdbeRealValue(pMem); - MemSetTypeFlag(pMem, MEM_Real); - sqlite3VdbeIntegerAffinity(pMem); + i64 i = pMem->u.i; + sqlite3AtoF(pMem->z, &pMem->u.r, pMem->n, pMem->enc); + if( rc==1 && sqlite3RealSameAsInt(pMem->u.r, i) ){ + pMem->u.i = i; + MemSetTypeFlag(pMem, MEM_Int); + }else{ + MemSetTypeFlag(pMem, MEM_Real); + } } } assert( (pMem->flags & (MEM_Int|MEM_Real|MEM_Null))!=0 ); @@ -70978,7 +74760,7 @@ } /* A no-op destructor */ -static void sqlite3NoopDestructor(void *p){ UNUSED_PARAMETER(p); } +SQLITE_PRIVATE void sqlite3NoopDestructor(void *p){ UNUSED_PARAMETER(p); } /* ** Set the value stored in *pMem should already be a NULL. @@ -71012,26 +74794,36 @@ } #endif +#ifdef SQLITE_DEBUG /* +** Return true if the Mem holds a RowSet object. This routine is intended +** for use inside of assert() statements. +*/ +SQLITE_PRIVATE int sqlite3VdbeMemIsRowSet(const Mem *pMem){ + return (pMem->flags&(MEM_Blob|MEM_Dyn))==(MEM_Blob|MEM_Dyn) + && pMem->xDel==sqlite3RowSetDelete; +} +#endif + +/* ** Delete any previous value and set the value of pMem to be an ** empty boolean index. +** +** Return SQLITE_OK on success and SQLITE_NOMEM if a memory allocation +** error occurs. */ -SQLITE_PRIVATE void sqlite3VdbeMemSetRowSet(Mem *pMem){ +SQLITE_PRIVATE int sqlite3VdbeMemSetRowSet(Mem *pMem){ sqlite3 *db = pMem->db; + RowSet *p; assert( db!=0 ); - assert( (pMem->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); sqlite3VdbeMemRelease(pMem); - pMem->zMalloc = sqlite3DbMallocRawNN(db, 64); - if( db->mallocFailed ){ - pMem->flags = MEM_Null; - pMem->szMalloc = 0; - }else{ - assert( pMem->zMalloc ); - pMem->szMalloc = sqlite3DbMallocSize(db, pMem->zMalloc); - pMem->u.pRowSet = sqlite3RowSetInit(db, pMem->zMalloc, pMem->szMalloc); - assert( pMem->u.pRowSet!=0 ); - pMem->flags = MEM_RowSet; - } + p = sqlite3RowSetInit(db); + if( p==0 ) return SQLITE_NOMEM; + pMem->z = (char*)p; + pMem->flags = MEM_Blob|MEM_Dyn; + pMem->xDel = sqlite3RowSetDelete; + return SQLITE_OK; } /* @@ -71064,7 +74856,21 @@ Mem *pX; for(i=0, pX=pVdbe->aMem; inMem; i++, pX++){ if( pX->pScopyFrom==pMem ){ - pX->flags |= MEM_Undefined; + /* If pX is marked as a shallow copy of pMem, then verify that + ** no significant changes have been made to pX since the OP_SCopy. + ** A significant change would indicated a missed call to this + ** function for pX. Minor changes, such as adding or removing a + ** dual type, are allowed, as long as the underlying value is the + ** same. */ + u16 mFlags = pMem->flags & pX->flags & pX->mScopyFlags; + assert( (mFlags&MEM_Int)==0 || pMem->u.i==pX->u.i ); + assert( (mFlags&MEM_Real)==0 || pMem->u.r==pX->u.r ); + assert( (mFlags&MEM_Str)==0 || (pMem->n==pX->n && pMem->z==pX->z) ); + assert( (mFlags&MEM_Blob)==0 || sqlite3BlobCompare(pMem,pX)==0 ); + + /* pMem is the register that is changing. But also mark pX as + ** undefined so that we can quickly detect the shallow-copy error */ + pX->flags = MEM_Undefined; pX->pScopyFrom = 0; } } @@ -71085,7 +74891,7 @@ sqlite3VdbeMemShallowCopy(pTo, pFrom, eType); } SQLITE_PRIVATE void sqlite3VdbeMemShallowCopy(Mem *pTo, const Mem *pFrom, int srcType){ - assert( (pFrom->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pFrom) ); assert( pTo->db==pFrom->db ); if( VdbeMemDynamic(pTo) ){ vdbeClrCopy(pTo,pFrom,srcType); return; } memcpy(pTo, pFrom, MEMCELLSIZE); @@ -71103,7 +74909,7 @@ SQLITE_PRIVATE int sqlite3VdbeMemCopy(Mem *pTo, const Mem *pFrom){ int rc = SQLITE_OK; - assert( (pFrom->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pFrom) ); if( VdbeMemDynamic(pTo) ) vdbeMemClearExternAndSetNull(pTo); memcpy(pTo, pFrom, MEMCELLSIZE); pTo->flags &= ~MEM_Dyn; @@ -71161,7 +74967,7 @@ u16 flags = 0; /* New value for pMem->flags */ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - assert( (pMem->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); /* If z is a NULL pointer, set pMem to contain an SQL NULL. */ if( !z ){ @@ -71178,7 +74984,7 @@ if( nByte<0 ){ assert( enc!=0 ); if( enc==SQLITE_UTF8 ){ - nByte = sqlite3Strlen30(z); + nByte = 0x7fffffff & (int)strlen(z); if( nByte>iLimit ) nByte = iLimit+1; }else{ for(nByte=0; nByte<=iLimit && (z[nByte] | z[nByte+1]); nByte+=2){} @@ -71256,12 +75062,11 @@ ){ int rc; pMem->flags = MEM_Null; - if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+2)) ){ + if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+1)) ){ rc = sqlite3BtreePayload(pCur, offset, amt, pMem->z); if( rc==SQLITE_OK ){ - pMem->z[amt] = 0; - pMem->z[amt+1] = 0; - pMem->flags = MEM_Blob|MEM_Term; + pMem->z[amt] = 0; /* Overrun area used when reading malformed records */ + pMem->flags = MEM_Blob; pMem->n = (int)amt; }else{ sqlite3VdbeMemRelease(pMem); @@ -71284,7 +75089,7 @@ /* Note: the calls to BtreeKeyFetch() and DataFetch() below assert() ** that both the BtShared and database handle mutexes are held. */ - assert( (pMem->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem) ); zData = (char *)sqlite3BtreePayloadFetch(pCur, &available); assert( zData!=0 ); @@ -71308,7 +75113,7 @@ assert( pVal!=0 ); assert( pVal->db==0 || sqlite3_mutex_held(pVal->db->mutex) ); assert( (enc&3)==(enc&~SQLITE_UTF16_ALIGNED) ); - assert( (pVal->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pVal) ); assert( (pVal->flags & (MEM_Null))==0 ); if( pVal->flags & (MEM_Blob|MEM_Str) ){ if( ExpandBlob(pVal) ) return 0; @@ -71330,6 +75135,7 @@ assert(pVal->enc==(enc & ~SQLITE_UTF16_ALIGNED) || pVal->db==0 || pVal->db->mallocFailed ); if( pVal->enc==(enc & ~SQLITE_UTF16_ALIGNED) ){ + assert( sqlite3VdbeMemConsistentDualRep(pVal) ); return pVal->z; }else{ return 0; @@ -71350,8 +75156,9 @@ if( !pVal ) return 0; assert( pVal->db==0 || sqlite3_mutex_held(pVal->db->mutex) ); assert( (enc&3)==(enc&~SQLITE_UTF16_ALIGNED) ); - assert( (pVal->flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pVal) ); if( (pVal->flags&(MEM_Str|MEM_Term))==(MEM_Str|MEM_Term) && pVal->enc==enc ){ + assert( sqlite3VdbeMemConsistentDualRep(pVal) ); return pVal->z; } if( pVal->flags&MEM_Null ){ @@ -71410,7 +75217,7 @@ if( pRec ){ pRec->pKeyInfo = sqlite3KeyInfoOfIndex(p->pParse, pIdx); if( pRec->pKeyInfo ){ - assert( pRec->pKeyInfo->nField+pRec->pKeyInfo->nXField==nCol ); + assert( pRec->pKeyInfo->nAllField==nCol ); assert( pRec->pKeyInfo->enc==ENC(db) ); pRec->aMem = (Mem *)((u8*)pRec + ROUND8(sizeof(UnpackedRecord))); for(i=0; iop)==TK_UPLUS || op==TK_SPAN ) pExpr = pExpr->pLeft; +#if defined(SQLITE_ENABLE_STAT3_OR_STAT4) + if( op==TK_REGISTER ) op = pExpr->op2; +#else if( NEVER(op==TK_REGISTER) ) op = pExpr->op2; +#endif /* Compressed expressions only appear when parsing the DEFAULT clause ** on a table column definition, and hence only when pCtx==0. This @@ -71651,18 +75462,25 @@ 0, SQLITE_DYNAMIC); } #endif - #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 else if( op==TK_FUNCTION && pCtx!=0 ){ rc = valueFromFunction(db, pExpr, enc, affinity, &pVal, pCtx); } #endif + else if( op==TK_TRUEFALSE ){ + pVal = valueNew(db, pCtx); + pVal->flags = MEM_Int; + pVal->u.i = pExpr->u.zToken[4]==0; + } *ppVal = pVal; return rc; no_mem: - sqlite3OomFault(db); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( pCtx==0 || pCtx->pParse->nErr==0 ) +#endif + sqlite3OomFault(db); sqlite3DbFree(db, zVal); assert( *ppVal==0 ); #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 @@ -71905,11 +75723,11 @@ int iCol, /* Column to extract */ sqlite3_value **ppVal /* OUT: Extracted value */ ){ - u32 t; /* a column type code */ + u32 t = 0; /* a column type code */ int nHdr; /* Size of the header in the record */ int iHdr; /* Next unread header byte */ int iField; /* Next unread data byte */ - int szField; /* Size of the current data field */ + int szField = 0; /* Size of the current data field */ int i; /* Column index */ u8 *a = (u8*)pRec; /* Typecast byte array */ Mem *pMem = *ppVal; /* Write result into this Mem object */ @@ -71946,7 +75764,7 @@ SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord *pRec){ if( pRec ){ int i; - int nCol = pRec->pKeyInfo->nField+pRec->pKeyInfo->nXField; + int nCol = pRec->pKeyInfo->nAllField; Mem *aMem = pRec->aMem; sqlite3 *db = aMem[0].db; for(i=0; ipVdbe = p; p->magic = VDBE_MAGIC_INIT; p->pParse = pParse; + pParse->pVdbe = p; assert( pParse->aLabel==0 ); assert( pParse->nLabel==0 ); assert( pParse->nOpAlloc==0 ); assert( pParse->szOpAlloc==0 ); + sqlite3VdbeAddOp2(p, OP_Init, 0, 1); return p; } @@ -72071,6 +75891,13 @@ } assert( p->zSql==0 ); p->zSql = sqlite3DbStrNDup(p->db, z, n); +#ifdef SQLITE_ENABLE_NORMALIZE + assert( p->zNormSql==0 ); + if( p->zSql && (prepFlags & SQLITE_PREPARE_NORMALIZE)!=0 ){ + sqlite3Normalize(p, p->zSql, n, prepFlags); + assert( p->zNormSql!=0 || p->db->mallocFailed ); + } +#endif } /* @@ -72092,6 +75919,11 @@ zTmp = pA->zSql; pA->zSql = pB->zSql; pB->zSql = zTmp; +#ifdef SQLITE_ENABLE_NORMALIZE + zTmp = pA->zNormSql; + pA->zNormSql = pB->zNormSql; + pB->zNormSql = zTmp; +#endif pB->expmask = pA->expmask; pB->prepFlags = pA->prepFlags; memcpy(pB->aCounter, pA->aCounter, sizeof(pB->aCounter)); @@ -72200,14 +76032,6 @@ #endif #ifdef SQLITE_DEBUG if( p->db->flags & SQLITE_VdbeAddopTrace ){ - int jj, kk; - Parse *pParse = p->pParse; - for(jj=kk=0; jjnColCache; jj++){ - struct yColCache *x = pParse->aColCache + jj; - printf(" r[%d]={%d:%d}", x->iReg, x->iTable, x->iColumn); - kk++; - } - if( kk ) printf("\n"); sqlite3VdbePrintOp(0, i, &p->aOp[i]); test_addop_breakpoint(); } @@ -72310,7 +76134,50 @@ return sqlite3VdbeAddOp4(p, op, p1, p2, p3, p4copy, p4type); } +#ifndef SQLITE_OMIT_EXPLAIN /* +** Return the address of the current EXPLAIN QUERY PLAN baseline. +** 0 means "none". +*/ +SQLITE_PRIVATE int sqlite3VdbeExplainParent(Parse *pParse){ + VdbeOp *pOp; + if( pParse->addrExplain==0 ) return 0; + pOp = sqlite3VdbeGetOp(pParse->pVdbe, pParse->addrExplain); + return pOp->p2; +} + +/* +** Add a new OP_Explain opcode. +** +** If the bPush flag is true, then make this opcode the parent for +** subsequent Explains until sqlite3VdbeExplainPop() is called. +*/ +SQLITE_PRIVATE void sqlite3VdbeExplain(Parse *pParse, u8 bPush, const char *zFmt, ...){ + if( pParse->explain==2 ){ + char *zMsg; + Vdbe *v; + va_list ap; + int iThis; + va_start(ap, zFmt); + zMsg = sqlite3VMPrintf(pParse->db, zFmt, ap); + va_end(ap); + v = pParse->pVdbe; + iThis = v->nOp; + sqlite3VdbeAddOp4(v, OP_Explain, iThis, pParse->addrExplain, 0, + zMsg, P4_DYNAMIC); + if( bPush) pParse->addrExplain = iThis; + } +} + +/* +** Pop the EXPLAIN QUERY PLAN stack one level. +*/ +SQLITE_PRIVATE void sqlite3VdbeExplainPop(Parse *pParse){ + pParse->addrExplain = sqlite3VdbeExplainParent(pParse); +} +#endif /* SQLITE_OMIT_EXPLAIN */ + +/* ** Add an OP_ParseSchema opcode. This routine is broken out from ** sqlite3VdbeAddOp4() since it needs to also needs to mark all btrees ** as having been used. @@ -72399,6 +76266,12 @@ assert( jnLabel ); assert( j>=0 ); if( p->aLabel ){ +#ifdef SQLITE_DEBUG + if( p->db->flags & SQLITE_VdbeAddopTrace ){ + printf("RESOLVE LABEL %d to %d\n", x, v->nOp); + } +#endif + assert( p->aLabel[j]==(-1) ); /* Labels may only be resolved once */ p->aLabel[j] = v->nOp; } } @@ -72499,7 +76372,8 @@ ** * OP_VUpdate ** * OP_VRename ** * OP_FkCounter with P2==0 (immediate foreign key constraint) -** * OP_CreateTable and OP_InitCoroutine (for CREATE TABLE AS SELECT ...) +** * OP_CreateBtree/BTREE_INTKEY and OP_InitCoroutine +** (for CREATE TABLE AS SELECT ...) ** ** Then check that the value of Parse.mayAbort is true if an ** ABORT may be thrown, or false otherwise. Return true if it does @@ -72527,7 +76401,7 @@ hasAbort = 1; break; } - if( opcode==OP_CreateTable ) hasCreateTable = 1; + if( opcode==OP_CreateBtree && pOp->p3==BTREE_INTKEY ) hasCreateTable = 1; if( opcode==OP_InitCoroutine ) hasInitCoroutine = 1; #ifndef SQLITE_OMIT_FOREIGN_KEY if( opcode==OP_FkCounter && pOp->p1==0 && pOp->p2==1 ){ @@ -72547,7 +76421,33 @@ } #endif /* SQLITE_DEBUG - the sqlite3AssertMayAbort() function */ +#ifdef SQLITE_DEBUG /* +** Increment the nWrite counter in the VDBE if the cursor is not an +** ephemeral cursor, or if the cursor argument is NULL. +*/ +SQLITE_PRIVATE void sqlite3VdbeIncrWriteCounter(Vdbe *p, VdbeCursor *pC){ + if( pC==0 + || (pC->eCurType!=CURTYPE_SORTER + && pC->eCurType!=CURTYPE_PSEUDO + && !pC->isEphemeral) + ){ + p->nWrite++; + } +} +#endif + +#ifdef SQLITE_DEBUG +/* +** Assert if an Abort at this point in time might result in a corrupt +** database. +*/ +SQLITE_PRIVATE void sqlite3VdbeAssertAbortable(Vdbe *p){ + assert( p->nWrite==0 || p->usesStmtJournal ); +} +#endif + +/* ** This routine is called after all opcodes have been inserted. It loops ** through all the opcodes and fixes up some details. ** @@ -72606,6 +76506,25 @@ p->bIsReader = 1; break; } + case OP_Next: + case OP_SorterNext: { + pOp->p4.xAdvance = sqlite3BtreeNext; + pOp->p4type = P4_ADVANCE; + /* The code generator never codes any of these opcodes as a jump + ** to a label. They are always coded as a jump backwards to a + ** known address */ + assert( pOp->p2>=0 ); + break; + } + case OP_Prev: { + pOp->p4.xAdvance = sqlite3BtreePrevious; + pOp->p4type = P4_ADVANCE; + /* The code generator never codes any of these opcodes as a jump + ** to a label. They are always coded as a jump backwards to a + ** known address */ + assert( pOp->p2>=0 ); + break; + } #ifndef SQLITE_OMIT_VIRTUALTABLE case OP_VUpdate: { if( pOp->p2>nMaxArgs ) nMaxArgs = pOp->p2; @@ -72617,27 +76536,25 @@ assert( pOp[-1].opcode==OP_Integer ); n = pOp[-1].p1; if( n>nMaxArgs ) nMaxArgs = n; - break; + /* Fall through into the default case */ } #endif - case OP_Next: - case OP_NextIfOpen: - case OP_SorterNext: { - pOp->p4.xAdvance = sqlite3BtreeNext; - pOp->p4type = P4_ADVANCE; + default: { + if( pOp->p2<0 ){ + /* The mkopcodeh.tcl script has so arranged things that the only + ** non-jump opcodes less than SQLITE_MX_JUMP_CODE are guaranteed to + ** have non-negative values for P2. */ + assert( (sqlite3OpcodeProperty[pOp->opcode] & OPFLG_JUMP)!=0 ); + assert( ADDR(pOp->p2)nLabel ); + pOp->p2 = aLabel[ADDR(pOp->p2)]; + } break; } - case OP_Prev: - case OP_PrevIfOpen: { - pOp->p4.xAdvance = sqlite3BtreePrevious; - pOp->p4type = P4_ADVANCE; - break; - } } - if( (sqlite3OpcodeProperty[pOp->opcode] & OPFLG_JUMP)!=0 && pOp->p2<0 ){ - assert( ADDR(pOp->p2)nLabel ); - pOp->p2 = aLabel[ADDR(pOp->p2)]; - } + /* The mkopcodeh.tcl script has so arranged things that the only + ** non-jump opcodes less than SQLITE_MX_JUMP_CODE are guaranteed to + ** have non-negative values for P2. */ + assert( (sqlite3OpcodeProperty[pOp->opcode]&OPFLG_JUMP)==0 || pOp->p2>=0); } if( pOp==p->aOp ) break; pOp--; @@ -72688,6 +76605,17 @@ #endif /* +** Generate code (a single OP_Abortable opcode) that will +** verify that the VDBE program can safely call Abort in the current +** context. +*/ +#if defined(SQLITE_DEBUG) +SQLITE_PRIVATE void sqlite3VdbeVerifyAbortable(Vdbe *p, int onError){ + if( onError==OE_Abort ) sqlite3VdbeAddOp0(p, OP_Abortable); +} +#endif + +/* ** This function returns a pointer to the array of opcodes associated with ** the Vdbe passed as the first argument. It is the callers responsibility ** to arrange for the returned array to be eventually freed using the @@ -72853,6 +76781,7 @@ case P4_REAL: case P4_INT64: case P4_DYNAMIC: + case P4_DYNBLOB: case P4_INTARRAY: { sqlite3DbFree(db, p4); break; @@ -73230,23 +77159,23 @@ const char *zOp = 0; switch( pExpr->op ){ case TK_STRING: - sqlite3XPrintf(p, "%Q", pExpr->u.zToken); + sqlite3_str_appendf(p, "%Q", pExpr->u.zToken); break; case TK_INTEGER: - sqlite3XPrintf(p, "%d", pExpr->u.iValue); + sqlite3_str_appendf(p, "%d", pExpr->u.iValue); break; case TK_NULL: - sqlite3XPrintf(p, "NULL"); + sqlite3_str_appendf(p, "NULL"); break; case TK_REGISTER: { - sqlite3XPrintf(p, "r[%d]", pExpr->iTable); + sqlite3_str_appendf(p, "r[%d]", pExpr->iTable); break; } case TK_COLUMN: { if( pExpr->iColumn<0 ){ - sqlite3XPrintf(p, "rowid"); + sqlite3_str_appendf(p, "rowid"); }else{ - sqlite3XPrintf(p, "c%d", (int)pExpr->iColumn); + sqlite3_str_appendf(p, "c%d", (int)pExpr->iColumn); } break; } @@ -73278,18 +77207,18 @@ case TK_NOTNULL: zOp = "NOTNULL"; break; default: - sqlite3XPrintf(p, "%s", "expr"); + sqlite3_str_appendf(p, "%s", "expr"); break; } if( zOp ){ - sqlite3XPrintf(p, "%s(", zOp); + sqlite3_str_appendf(p, "%s(", zOp); displayP4Expr(p, pExpr->pLeft); if( pExpr->pRight ){ - sqlite3StrAccumAppend(p, ",", 1); + sqlite3_str_append(p, ",", 1); displayP4Expr(p, pExpr->pRight); } - sqlite3StrAccumAppend(p, ")", 1); + sqlite3_str_append(p, ")", 1); } } #endif /* VDBE_DISPLAY_P4 && defined(SQLITE_ENABLE_CURSOR_HINTS) */ @@ -73310,14 +77239,15 @@ int j; KeyInfo *pKeyInfo = pOp->p4.pKeyInfo; assert( pKeyInfo->aSortOrder!=0 ); - sqlite3XPrintf(&x, "k(%d", pKeyInfo->nField); - for(j=0; jnField; j++){ + sqlite3_str_appendf(&x, "k(%d", pKeyInfo->nKeyField); + for(j=0; jnKeyField; j++){ CollSeq *pColl = pKeyInfo->aColl[j]; const char *zColl = pColl ? pColl->zName : ""; if( strcmp(zColl, "BINARY")==0 ) zColl = "B"; - sqlite3XPrintf(&x, ",%s%s", pKeyInfo->aSortOrder[j] ? "-" : "", zColl); + sqlite3_str_appendf(&x, ",%s%s", + pKeyInfo->aSortOrder[j] ? "-" : "", zColl); } - sqlite3StrAccumAppend(&x, ")", 1); + sqlite3_str_append(&x, ")", 1); break; } #ifdef SQLITE_ENABLE_CURSOR_HINTS @@ -73328,31 +77258,31 @@ #endif case P4_COLLSEQ: { CollSeq *pColl = pOp->p4.pColl; - sqlite3XPrintf(&x, "(%.20s)", pColl->zName); + sqlite3_str_appendf(&x, "(%.20s)", pColl->zName); break; } case P4_FUNCDEF: { FuncDef *pDef = pOp->p4.pFunc; - sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg); + sqlite3_str_appendf(&x, "%s(%d)", pDef->zName, pDef->nArg); break; } #if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) case P4_FUNCCTX: { FuncDef *pDef = pOp->p4.pCtx->pFunc; - sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg); + sqlite3_str_appendf(&x, "%s(%d)", pDef->zName, pDef->nArg); break; } #endif case P4_INT64: { - sqlite3XPrintf(&x, "%lld", *pOp->p4.pI64); + sqlite3_str_appendf(&x, "%lld", *pOp->p4.pI64); break; } case P4_INT32: { - sqlite3XPrintf(&x, "%d", pOp->p4.i); + sqlite3_str_appendf(&x, "%d", pOp->p4.i); break; } case P4_REAL: { - sqlite3XPrintf(&x, "%.16g", *pOp->p4.pReal); + sqlite3_str_appendf(&x, "%.16g", *pOp->p4.pReal); break; } case P4_MEM: { @@ -73360,9 +77290,9 @@ if( pMem->flags & MEM_Str ){ zP4 = pMem->z; }else if( pMem->flags & MEM_Int ){ - sqlite3XPrintf(&x, "%lld", pMem->u.i); + sqlite3_str_appendf(&x, "%lld", pMem->u.i); }else if( pMem->flags & MEM_Real ){ - sqlite3XPrintf(&x, "%.16g", pMem->u.r); + sqlite3_str_appendf(&x, "%.16g", pMem->u.r); }else if( pMem->flags & MEM_Null ){ zP4 = "NULL"; }else{ @@ -73374,7 +77304,7 @@ #ifndef SQLITE_OMIT_VIRTUALTABLE case P4_VTAB: { sqlite3_vtab *pVtab = pOp->p4.pVtab->pVtab; - sqlite3XPrintf(&x, "vtab:%p", pVtab); + sqlite3_str_appendf(&x, "vtab:%p", pVtab); break; } #endif @@ -73383,23 +77313,24 @@ int *ai = pOp->p4.ai; int n = ai[0]; /* The first element of an INTARRAY is always the ** count of the number of elements to follow */ - for(i=1; ip4.pTab->zName); + sqlite3_str_appendf(&x, "%s", pOp->p4.pTab->zName); break; } default: { @@ -73500,7 +77431,7 @@ /* ** Print a single opcode. This routine is used for debugging only. */ -SQLITE_PRIVATE void sqlite3VdbePrintOp(FILE *pOut, int pc, Op *pOp){ +SQLITE_PRIVATE void sqlite3VdbePrintOp(FILE *pOut, int pc, VdbeOp *pOp){ char *zP4; char zPtr[50]; char zCom[100]; @@ -73569,9 +77500,8 @@ */ testcase( p->flags & MEM_Agg ); testcase( p->flags & MEM_Dyn ); - testcase( p->flags & MEM_Frame ); - testcase( p->flags & MEM_RowSet ); - if( p->flags&(MEM_Agg|MEM_Dyn|MEM_Frame|MEM_RowSet) ){ + testcase( p->xDel==sqlite3VdbeFrameMemDel ); + if( p->flags&(MEM_Agg|MEM_Dyn) ){ sqlite3VdbeMemRelease(p); }else if( p->szMalloc ){ sqlite3DbFreeNN(db, p->zMalloc); @@ -73583,7 +77513,36 @@ } } +#ifdef SQLITE_DEBUG /* +** Verify that pFrame is a valid VdbeFrame pointer. Return true if it is +** and false if something is wrong. +** +** This routine is intended for use inside of assert() statements only. +*/ +SQLITE_PRIVATE int sqlite3VdbeFrameIsValid(VdbeFrame *pFrame){ + if( pFrame->iFrameMagic!=SQLITE_FRAME_MAGIC ) return 0; + return 1; +} +#endif + + +/* +** This is a destructor on a Mem object (which is really an sqlite3_value) +** that deletes the Frame object that is attached to it as a blob. +** +** This routine does not delete the Frame right away. It merely adds the +** frame to a list of frames to be deleted when the Vdbe halts. +*/ +SQLITE_PRIVATE void sqlite3VdbeFrameMemDel(void *pArg){ + VdbeFrame *pFrame = (VdbeFrame*)pArg; + assert( sqlite3VdbeFrameIsValid(pFrame) ); + pFrame->pParent = pFrame->v->pDelFrame; + pFrame->v->pDelFrame = pFrame; +} + + +/* ** Delete a VdbeFrame object and its contents. VdbeFrame objects are ** allocated by the OP_Program opcode in sqlite3VdbeExec(). */ @@ -73591,6 +77550,7 @@ int i; Mem *aMem = VdbeFrameMem(p); VdbeCursor **apCsr = (VdbeCursor **)&aMem[p->nChildMem]; + assert( sqlite3VdbeFrameIsValid(p) ); for(i=0; inChildCsr; i++){ sqlite3VdbeFreeCursor(p->v, apCsr[i]); } @@ -73611,6 +77571,9 @@ ** p->explain==2, only OP_Explain instructions are listed and these ** are shown in a different format. p->explain==2 is used to implement ** EXPLAIN QUERY PLAN. +** 2018-04-24: In p->explain==2 mode, the OP_Init opcodes of triggers +** are also shown, so that the boundaries between the main program and +** each trigger are clear. ** ** When p->explain==1, first the main program is listed, then each of ** the trigger subprograms are listed one by one. @@ -73626,6 +77589,8 @@ int i; /* Loop counter */ int rc = SQLITE_OK; /* Return code */ Mem *pMem = &p->aMem[1]; /* First Mem of result set */ + int bListSubprogs = (p->explain==1 || (db->flags & SQLITE_TriggerEQP)!=0); + Op *pOp = 0; assert( p->explain ); assert( p->magic==VDBE_MAGIC_RUN ); @@ -73638,7 +77603,7 @@ releaseMemArray(pMem, 8); p->pResultSet = 0; - if( p->rc==SQLITE_NOMEM_BKPT ){ + if( p->rc==SQLITE_NOMEM ){ /* This happens if a malloc() inside a call to sqlite3_column_text() or ** sqlite3_column_text16() failed. */ sqlite3OomFault(db); @@ -73653,7 +77618,7 @@ ** encountered, but p->pc will eventually catch up to nRow. */ nRow = p->nOp; - if( p->explain==1 ){ + if( bListSubprogs ){ /* The first 8 memory cells are used for the result set. So we will ** commandeer the 9th cell to use as storage for an array of pointers ** to trigger subprograms. The VDBE is guaranteed to have at least 9 @@ -73671,19 +77636,13 @@ } } - do{ + while(1){ /* Loop exits via break */ i = p->pc++; - }while( iexplain==2 && p->aOp[i].opcode!=OP_Explain ); - if( i>=nRow ){ - p->rc = SQLITE_OK; - rc = SQLITE_DONE; - }else if( db->u1.isInterrupted ){ - p->rc = SQLITE_INTERRUPT; - rc = SQLITE_ERROR; - sqlite3VdbeError(p, sqlite3ErrStr(p->rc)); - }else{ - char *zP4; - Op *pOp; + if( i>=nRow ){ + p->rc = SQLITE_OK; + rc = SQLITE_DONE; + break; + } if( inOp ){ /* The output line number is small enough that we are still in the ** main program. */ @@ -73698,94 +77657,113 @@ } pOp = &apSub[j]->aOp[i]; } - if( p->explain==1 ){ - pMem->flags = MEM_Int; - pMem->u.i = i; /* Program counter */ - pMem++; - - pMem->flags = MEM_Static|MEM_Str|MEM_Term; - pMem->z = (char*)sqlite3OpcodeName(pOp->opcode); /* Opcode */ - assert( pMem->z!=0 ); - pMem->n = sqlite3Strlen30(pMem->z); - pMem->enc = SQLITE_UTF8; - pMem++; - /* When an OP_Program opcode is encounter (the only opcode that has - ** a P4_SUBPROGRAM argument), expand the size of the array of subprograms - ** kept in p->aMem[9].z to hold the new program - assuming this subprogram - ** has not already been seen. - */ - if( pOp->p4type==P4_SUBPROGRAM ){ - int nByte = (nSub+1)*sizeof(SubProgram*); - int j; - for(j=0; jp4.pProgram ) break; + /* When an OP_Program opcode is encounter (the only opcode that has + ** a P4_SUBPROGRAM argument), expand the size of the array of subprograms + ** kept in p->aMem[9].z to hold the new program - assuming this subprogram + ** has not already been seen. + */ + if( bListSubprogs && pOp->p4type==P4_SUBPROGRAM ){ + int nByte = (nSub+1)*sizeof(SubProgram*); + int j; + for(j=0; jp4.pProgram ) break; + } + if( j==nSub ){ + p->rc = sqlite3VdbeMemGrow(pSub, nByte, nSub!=0); + if( p->rc!=SQLITE_OK ){ + rc = SQLITE_ERROR; + break; } - if( j==nSub && SQLITE_OK==sqlite3VdbeMemGrow(pSub, nByte, nSub!=0) ){ - apSub = (SubProgram **)pSub->z; - apSub[nSub++] = pOp->p4.pProgram; - pSub->flags |= MEM_Blob; - pSub->n = nSub*sizeof(SubProgram*); - } + apSub = (SubProgram **)pSub->z; + apSub[nSub++] = pOp->p4.pProgram; + pSub->flags |= MEM_Blob; + pSub->n = nSub*sizeof(SubProgram*); + nRow += pOp->p4.pProgram->nOp; } } + if( p->explain<2 ) break; + if( pOp->opcode==OP_Explain ) break; + if( pOp->opcode==OP_Init && p->pc>1 ) break; + } - pMem->flags = MEM_Int; - pMem->u.i = pOp->p1; /* P1 */ - pMem++; + if( rc==SQLITE_OK ){ + if( db->u1.isInterrupted ){ + p->rc = SQLITE_INTERRUPT; + rc = SQLITE_ERROR; + sqlite3VdbeError(p, sqlite3ErrStr(p->rc)); + }else{ + char *zP4; + if( p->explain==1 ){ + pMem->flags = MEM_Int; + pMem->u.i = i; /* Program counter */ + pMem++; + + pMem->flags = MEM_Static|MEM_Str|MEM_Term; + pMem->z = (char*)sqlite3OpcodeName(pOp->opcode); /* Opcode */ + assert( pMem->z!=0 ); + pMem->n = sqlite3Strlen30(pMem->z); + pMem->enc = SQLITE_UTF8; + pMem++; + } - pMem->flags = MEM_Int; - pMem->u.i = pOp->p2; /* P2 */ - pMem++; + pMem->flags = MEM_Int; + pMem->u.i = pOp->p1; /* P1 */ + pMem++; - pMem->flags = MEM_Int; - pMem->u.i = pOp->p3; /* P3 */ - pMem++; + pMem->flags = MEM_Int; + pMem->u.i = pOp->p2; /* P2 */ + pMem++; - if( sqlite3VdbeMemClearAndResize(pMem, 100) ){ /* P4 */ - assert( p->db->mallocFailed ); - return SQLITE_ERROR; - } - pMem->flags = MEM_Str|MEM_Term; - zP4 = displayP4(pOp, pMem->z, pMem->szMalloc); - if( zP4!=pMem->z ){ - pMem->n = 0; - sqlite3VdbeMemSetStr(pMem, zP4, -1, SQLITE_UTF8, 0); - }else{ - assert( pMem->z!=0 ); - pMem->n = sqlite3Strlen30(pMem->z); - pMem->enc = SQLITE_UTF8; - } - pMem++; + pMem->flags = MEM_Int; + pMem->u.i = pOp->p3; /* P3 */ + pMem++; - if( p->explain==1 ){ - if( sqlite3VdbeMemClearAndResize(pMem, 4) ){ + if( sqlite3VdbeMemClearAndResize(pMem, 100) ){ /* P4 */ assert( p->db->mallocFailed ); return SQLITE_ERROR; } pMem->flags = MEM_Str|MEM_Term; - pMem->n = 2; - sqlite3_snprintf(3, pMem->z, "%.2x", pOp->p5); /* P5 */ - pMem->enc = SQLITE_UTF8; + zP4 = displayP4(pOp, pMem->z, pMem->szMalloc); + if( zP4!=pMem->z ){ + pMem->n = 0; + sqlite3VdbeMemSetStr(pMem, zP4, -1, SQLITE_UTF8, 0); + }else{ + assert( pMem->z!=0 ); + pMem->n = sqlite3Strlen30(pMem->z); + pMem->enc = SQLITE_UTF8; + } pMem++; - + + if( p->explain==1 ){ + if( sqlite3VdbeMemClearAndResize(pMem, 4) ){ + assert( p->db->mallocFailed ); + return SQLITE_ERROR; + } + pMem->flags = MEM_Str|MEM_Term; + pMem->n = 2; + sqlite3_snprintf(3, pMem->z, "%.2x", pOp->p5); /* P5 */ + pMem->enc = SQLITE_UTF8; + pMem++; + #ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS - if( sqlite3VdbeMemClearAndResize(pMem, 500) ){ - assert( p->db->mallocFailed ); - return SQLITE_ERROR; - } - pMem->flags = MEM_Str|MEM_Term; - pMem->n = displayComment(pOp, zP4, pMem->z, 500); - pMem->enc = SQLITE_UTF8; + if( sqlite3VdbeMemClearAndResize(pMem, 500) ){ + assert( p->db->mallocFailed ); + return SQLITE_ERROR; + } + pMem->flags = MEM_Str|MEM_Term; + pMem->n = displayComment(pOp, zP4, pMem->z, 500); + pMem->enc = SQLITE_UTF8; #else - pMem->flags = MEM_Null; /* Comment */ + pMem->flags = MEM_Null; /* Comment */ #endif + } + + p->nResColumn = 8 - 4*(p->explain-1); + p->pResultSet = &p->aMem[1]; + p->rc = SQLITE_OK; + rc = SQLITE_ROW; } - - p->nResColumn = 8 - 4*(p->explain-1); - p->pResultSet = &p->aMem[1]; - p->rc = SQLITE_OK; - rc = SQLITE_ROW; } return rc; } @@ -74148,27 +78126,6 @@ } /* -** Clean up the VM after a single run. -*/ -static void Cleanup(Vdbe *p){ - sqlite3 *db = p->db; - -#ifdef SQLITE_DEBUG - /* Execute assert() statements to ensure that the Vdbe.apCsr[] and - ** Vdbe.aMem[] arrays have already been cleaned up. */ - int i; - if( p->apCsr ) for(i=0; inCursor; i++) assert( p->apCsr[i]==0 ); - if( p->aMem ){ - for(i=0; inMem; i++) assert( p->aMem[i].flags==MEM_Undefined ); - } -#endif - - sqlite3DbFree(db, p->zErrMsg); - p->zErrMsg = 0; - p->pResultSet = 0; -} - -/* ** Set the number of result columns that will be returned by this SQL ** statement. This is now set at compile time, rather than during ** execution of the vdbe program so that sqlite3_column_count() can @@ -74276,6 +78233,7 @@ pPager = sqlite3BtreePager(pBt); if( db->aDb[i].safety_level!=PAGER_SYNCHRONOUS_OFF && aMJNeeded[sqlite3PagerGetJournalMode(pPager)] + && sqlite3PagerIsMemdb(pPager)==0 ){ assert( i!=1 ); nTrans++; @@ -74876,6 +78834,10 @@ ** VDBE_MAGIC_INIT. */ SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe *p){ +#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) + int i; +#endif + sqlite3 *db; db = p->db; @@ -74885,7 +78847,7 @@ */ sqlite3VdbeHalt(p); - /* If the VDBE has be run even partially, then transfer the error code + /* If the VDBE has been run even partially, then transfer the error code ** and error message from the VDBE into the main database structure. But ** if the VDBE has just been set to run but has not actually executed any ** instructions yet, leave the main database error information unchanged. @@ -74893,8 +78855,6 @@ if( p->pc>=0 ){ vdbeInvokeSqllog(p); sqlite3VdbeTransferError(p); - sqlite3DbFree(db, p->zErrMsg); - p->zErrMsg = 0; if( p->runOnlyOnce ) p->expired = 1; }else if( p->rc && p->expired ){ /* The expired flag was set on the VDBE before the first call @@ -74902,13 +78862,24 @@ ** called), set the database error in this case as well. */ sqlite3ErrorWithMsg(db, p->rc, p->zErrMsg ? "%s" : 0, p->zErrMsg); - sqlite3DbFree(db, p->zErrMsg); - p->zErrMsg = 0; } - /* Reclaim all memory used by the VDBE + /* Reset register contents and reclaim error message memory. */ - Cleanup(p); +#ifdef SQLITE_DEBUG + /* Execute assert() statements to ensure that the Vdbe.apCsr[] and + ** Vdbe.aMem[] arrays have already been cleaned up. */ + if( p->apCsr ) for(i=0; inCursor; i++) assert( p->apCsr[i]==0 ); + if( p->aMem ){ + for(i=0; inMem; i++) assert( p->aMem[i].flags==MEM_Undefined ); + } +#endif + sqlite3DbFree(db, p->zErrMsg); + p->zErrMsg = 0; + p->pResultSet = 0; +#ifdef SQLITE_DEBUG + p->nWrite = 0; +#endif /* Save profiling information from this VDBE run. */ @@ -74916,7 +78887,6 @@ { FILE *out = fopen("vdbe_profile.out", "a"); if( out ){ - int i; fprintf(out, "---- "); for(i=0; inOp; i++){ fprintf(out, "%02x", p->aOp[i].opcode); @@ -75025,6 +78995,9 @@ vdbeFreeOpArray(db, p->aOp, p->nOp); sqlite3DbFree(db, p->aColName); sqlite3DbFree(db, p->zSql); +#ifdef SQLITE_ENABLE_NORMALIZE + sqlite3DbFree(db, p->zNormSql); +#endif #ifdef SQLITE_ENABLE_STMT_SCANSTATUS { int i; @@ -75042,7 +79015,7 @@ SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe *p){ sqlite3 *db; - if( NEVER(p==0) ) return; + assert( p!=0 ); db = p->db; assert( sqlite3_mutex_held(db->mutex) ); sqlite3VdbeClearObject(db, p); @@ -75129,20 +79102,19 @@ */ SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor **pp, int *piCol){ VdbeCursor *p = *pp; - if( p->eCurType==CURTYPE_BTREE ){ - if( p->deferredMoveto ){ - int iMap; - if( p->aAltMap && (iMap = p->aAltMap[1+*piCol])>0 ){ - *pp = p->pAltCursor; - *piCol = iMap - 1; - return SQLITE_OK; - } - return handleDeferredMoveto(p); + assert( p->eCurType==CURTYPE_BTREE || p->eCurType==CURTYPE_PSEUDO ); + if( p->deferredMoveto ){ + int iMap; + if( p->aAltMap && (iMap = p->aAltMap[1+*piCol])>0 ){ + *pp = p->pAltCursor; + *piCol = iMap - 1; + return SQLITE_OK; } - if( sqlite3BtreeCursorHasMoved(p->uc.pCursor) ){ - return handleMovedCursor(p); - } + return handleDeferredMoveto(p); } + if( sqlite3BtreeCursorHasMoved(p->uc.pCursor) ){ + return handleMovedCursor(p); + } return SQLITE_OK; } @@ -75439,7 +79411,13 @@ Mem *pMem /* Memory cell to write value into */ ){ switch( serial_type ){ - case 10: /* Reserved for future use */ + case 10: { /* Internal use only: NULL with virtual table + ** UPDATE no-change flag set */ + pMem->flags = MEM_Null|MEM_Zero; + pMem->n = 0; + pMem->u.nZero = 0; + break; + } case 11: /* Reserved for future use */ case 0: { /* Null */ /* EVIDENCE-OF: R-24078-09375 Value is a NULL. */ @@ -75537,13 +79515,13 @@ ){ UnpackedRecord *p; /* Unpacked record to return */ int nByte; /* Number of bytes required for *p */ - nByte = ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*(pKeyInfo->nField+1); + nByte = ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*(pKeyInfo->nKeyField+1); p = (UnpackedRecord *)sqlite3DbMallocRaw(pKeyInfo->db, nByte); if( !p ) return 0; p->aMem = (Mem*)&((char*)p)[ROUND8(sizeof(UnpackedRecord))]; assert( pKeyInfo->aSortOrder!=0 ); p->pKeyInfo = pKeyInfo; - p->nField = pKeyInfo->nField + 1; + p->nField = pKeyInfo->nKeyField + 1; return p; } @@ -75583,7 +79561,7 @@ pMem++; if( (++u)>=p->nField ) break; } - assert( u<=pKeyInfo->nField + 1 ); + assert( u<=pKeyInfo->nKeyField + 1 ); p->nField = u; } @@ -75632,9 +79610,9 @@ idx1 = getVarint32(aKey1, szHdr1); if( szHdr1>98307 ) return SQLITE_CORRUPT; d1 = szHdr1; - assert( pKeyInfo->nField+pKeyInfo->nXField>=pPKey2->nField || CORRUPT_DB ); + assert( pKeyInfo->nAllField>=pPKey2->nField || CORRUPT_DB ); assert( pKeyInfo->aSortOrder!=0 ); - assert( pKeyInfo->nField>0 ); + assert( pKeyInfo->nKeyField>0 ); assert( idx1<=szHdr1 || CORRUPT_DB ); do{ u32 serial_type1; @@ -75696,12 +79674,12 @@ /* ** Count the number of fields (a.k.a. columns) in the record given by ** pKey,nKey. The verify that this count is less than or equal to the -** limit given by pKeyInfo->nField + pKeyInfo->nXField. +** limit given by pKeyInfo->nAllField. ** ** If this constraint is not satisfied, it means that the high-speed ** vdbeRecordCompareInt() and vdbeRecordCompareString() routines will ** not work correctly. If this assert() ever fires, it probably means -** that the KeyInfo.nField or KeyInfo.nXField values were computed +** that the KeyInfo.nKeyField or KeyInfo.nAllField values were computed ** incorrectly. */ static void vdbeAssertFieldCountWithinLimits( @@ -75722,7 +79700,7 @@ idx += getVarint32(aKey+idx, notUsed); nField++; } - assert( nField <= pKeyInfo->nField+pKeyInfo->nXField ); + assert( nField <= pKeyInfo->nAllField ); } #else # define vdbeAssertFieldCountWithinLimits(A,B,C) @@ -75784,7 +79762,7 @@ ** is less than, equal to, or greater than the second, respectively. ** If one blob is a prefix of the other, then the shorter is the lessor. */ -static SQLITE_NOINLINE int sqlite3BlobCompare(const Mem *pB1, const Mem *pB2){ +SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3BlobCompare(const Mem *pB1, const Mem *pB2){ int c; int n1 = pB1->n; int n2 = pB2->n; @@ -75827,13 +79805,10 @@ i64 y; double s; if( r<-9223372036854775808.0 ) return +1; - if( r>9223372036854775807.0 ) return -1; + if( r>=9223372036854775808.0 ) return -1; y = (i64)r; if( iy ){ - if( y==SMALLEST_INT64 && r>0.0 ) return -1; - return +1; - } + if( i>y ) return +1; s = (double)i; if( sr ) return +1; @@ -75857,7 +79832,7 @@ f1 = pMem1->flags; f2 = pMem2->flags; combined_flags = f1|f2; - assert( (combined_flags & MEM_RowSet)==0 ); + assert( !sqlite3VdbeMemIsRowSet(pMem1) && !sqlite3VdbeMemIsRowSet(pMem2) ); /* If one value is NULL, it is less than the other. If both values ** are NULL, return 0. @@ -76002,7 +79977,7 @@ u32 idx1; /* Offset of first type in header */ int rc = 0; /* Return value */ Mem *pRhs = pPKey2->aMem; /* Next field of pPKey2 to compare */ - KeyInfo *pKeyInfo = pPKey2->pKeyInfo; + KeyInfo *pKeyInfo; const unsigned char *aKey1 = (const unsigned char *)pKey1; Mem mem1; @@ -76027,10 +80002,10 @@ } VVA_ONLY( mem1.szMalloc = 0; ) /* Only needed by assert() statements */ - assert( pPKey2->pKeyInfo->nField+pPKey2->pKeyInfo->nXField>=pPKey2->nField + assert( pPKey2->pKeyInfo->nAllField>=pPKey2->nField || CORRUPT_DB ); assert( pPKey2->pKeyInfo->aSortOrder!=0 ); - assert( pPKey2->pKeyInfo->nField>0 ); + assert( pPKey2->pKeyInfo->nKeyField>0 ); assert( idx1<=szHdr1 || CORRUPT_DB ); do{ u32 serial_type; @@ -76097,7 +80072,7 @@ if( (d1+mem1.n) > (unsigned)nKey1 ){ pPKey2->errCode = (u8)SQLITE_CORRUPT_BKPT; return 0; /* Corruption */ - }else if( pKeyInfo->aColl[i] ){ + }else if( (pKeyInfo = pPKey2->pKeyInfo)->aColl[i] ){ mem1.enc = pKeyInfo->enc; mem1.db = pKeyInfo->db; mem1.flags = MEM_Str; @@ -76148,7 +80123,7 @@ } if( rc!=0 ){ - if( pKeyInfo->aSortOrder[i] ){ + if( pPKey2->pKeyInfo->aSortOrder[i] ){ rc = -rc; } assert( vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, rc) ); @@ -76157,10 +80132,11 @@ } i++; + if( i==pPKey2->nField ) break; pRhs++; d1 += sqlite3VdbeSerialTypeLen(serial_type); idx1 += sqlite3VarintLen(serial_type); - }while( idx1<(unsigned)szHdr1 && inField && d1<=(unsigned)nKey1 ); + }while( idx1<(unsigned)szHdr1 && d1<=(unsigned)nKey1 ); /* No memory allocation is ever used on mem1. Prove this using ** the following assert(). If the assert() fails, it indicates a @@ -76172,7 +80148,7 @@ ** value. */ assert( CORRUPT_DB || vdbeRecordCompareDebug(nKey1, pKey1, pPKey2, pPKey2->default_rc) - || pKeyInfo->db->mallocFailed + || pPKey2->pKeyInfo->db->mallocFailed ); pPKey2->eqSeen = 1; return pPKey2->default_rc; @@ -76363,7 +80339,7 @@ ** The easiest way to enforce this limit is to consider only records with ** 13 fields or less. If the first field is an integer, the maximum legal ** header size is (12*5 + 1 + 1) bytes. */ - if( (p->pKeyInfo->nField + p->pKeyInfo->nXField)<=13 ){ + if( p->pKeyInfo->nAllField<=13 ){ int flags = p->aMem[0].flags; if( p->pKeyInfo->aSortOrder[0] ){ p->r1 = 1; @@ -76423,7 +80399,9 @@ (void)getVarint32((u8*)m.z, szHdr); testcase( szHdr==3 ); testcase( szHdr==m.n ); - if( unlikely(szHdr<3 || (int)szHdr>m.n) ){ + testcase( szHdr>0x7fffffff ); + assert( m.n>=0 ); + if( unlikely(szHdr<3 || szHdr>(unsigned)m.n) ){ goto idx_rowid_corruption; } @@ -76498,7 +80476,7 @@ if( rc ){ return rc; } - *res = sqlite3VdbeRecordCompare(m.n, m.z, pUnpacked); + *res = sqlite3VdbeRecordCompareWithSkip(m.n, m.z, pUnpacked, 0); sqlite3VdbeMemRelease(&m); return SQLITE_OK; } @@ -76530,11 +80508,19 @@ ** programs obsolete. Removing user-defined functions or collating ** sequences, or changing an authorization function are the types of ** things that make prepared statements obsolete. +** +** If iCode is 1, then expiration is advisory. The statement should +** be reprepared before being restarted, but if it is already running +** it is allowed to run to completion. +** +** Internally, this function just sets the Vdbe.expired flag on all +** prepared statements. The flag is set to 1 for an immediate expiration +** and set to 2 for an advisory expiration. */ -SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3 *db){ +SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3 *db, int iCode){ Vdbe *p; for(p = db->pVdbe; p; p=p->pNext){ - p->expired = 1; + p->expired = iCode+1; } } @@ -76698,7 +80684,7 @@ preupdate.iNewReg = iReg; preupdate.keyinfo.db = db; preupdate.keyinfo.enc = ENC(db); - preupdate.keyinfo.nField = pTab->nCol; + preupdate.keyinfo.nKeyField = pTab->nCol; preupdate.keyinfo.aSortOrder = (u8*)&fakeSortOrder; preupdate.iKey1 = iKey1; preupdate.iKey2 = iKey2; @@ -76708,8 +80694,8 @@ db->xPreUpdateCallback(db->pPreUpdateArg, db, op, zDb, zTbl, iKey1, iKey2); db->pPreUpdate = 0; sqlite3DbFree(db, preupdate.aRecord); - vdbeFreeUnpacked(db, preupdate.keyinfo.nField+1, preupdate.pUnpacked); - vdbeFreeUnpacked(db, preupdate.keyinfo.nField+1, preupdate.pNewUnpacked); + vdbeFreeUnpacked(db, preupdate.keyinfo.nKeyField+1, preupdate.pUnpacked); + vdbeFreeUnpacked(db, preupdate.keyinfo.nKeyField+1, preupdate.pNewUnpacked); if( preupdate.aNew ){ int i; for(i=0; inField; i++){ @@ -76992,6 +80978,11 @@ return aType[pVal->flags&MEM_AffMask]; } +/* Return true if a parameter to xUpdate represents an unchanged column */ +SQLITE_API int sqlite3_value_nochange(sqlite3_value *pVal){ + return (pVal->flags&(MEM_Null|MEM_Zero))==(MEM_Null|MEM_Zero); +} + /* Make a copy of an sqlite3_value object */ SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value *pOrig){ @@ -77091,7 +81082,6 @@ SQLITE_API void sqlite3_result_error(sqlite3_context *pCtx, const char *z, int n){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_ERROR; - pCtx->fErrorOrAux = 1; sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF8, SQLITE_TRANSIENT); } #ifndef SQLITE_OMIT_UTF16 @@ -77098,7 +81088,6 @@ SQLITE_API void sqlite3_result_error16(sqlite3_context *pCtx, const void *z, int n){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_ERROR; - pCtx->fErrorOrAux = 1; sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF16NATIVE, SQLITE_TRANSIENT); } #endif @@ -77122,7 +81111,8 @@ ){ Mem *pOut = pCtx->pOut; assert( sqlite3_mutex_held(pOut->db->mutex) ); - sqlite3VdbeMemSetNull(pOut); + sqlite3VdbeMemRelease(pOut); + pOut->flags = MEM_Null; sqlite3VdbeMemSetPointer(pOut, pPtr, zPType, xDestructor); } SQLITE_API void sqlite3_result_subtype(sqlite3_context *pCtx, unsigned int eSubtype){ @@ -77203,8 +81193,7 @@ return SQLITE_OK; } SQLITE_API void sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){ - pCtx->isError = errCode; - pCtx->fErrorOrAux = 1; + pCtx->isError = errCode ? errCode : -1; #ifdef SQLITE_DEBUG if( pCtx->pVdbe ) pCtx->pVdbe->rcApp = errCode; #endif @@ -77218,7 +81207,6 @@ SQLITE_API void sqlite3_result_error_toobig(sqlite3_context *pCtx){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_TOOBIG; - pCtx->fErrorOrAux = 1; sqlite3VdbeMemSetStr(pCtx->pOut, "string or blob too big", -1, SQLITE_UTF8, SQLITE_STATIC); } @@ -77228,7 +81216,6 @@ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); sqlite3VdbeMemSetNull(pCtx->pOut); pCtx->isError = SQLITE_NOMEM_BKPT; - pCtx->fErrorOrAux = 1; sqlite3OomFault(pCtx->pOut->db); } @@ -77247,7 +81234,7 @@ sqlite3BtreeEnter(pBt); nEntry = sqlite3PagerWalCallback(sqlite3BtreePager(pBt)); sqlite3BtreeLeave(pBt); - if( db->xWalCallback && nEntry>0 && rc==SQLITE_OK ){ + if( nEntry>0 && db->xWalCallback && rc==SQLITE_OK ){ rc = db->xWalCallback(db->pWalArg, db, db->aDb[i].zDbSName, nEntry); } } @@ -77357,7 +81344,7 @@ if( rc!=SQLITE_ROW ) checkProfileCallback(db, p); #endif - if( rc==SQLITE_DONE ){ + if( rc==SQLITE_DONE && db->autoCommit ){ assert( p->rc==SQLITE_OK ); p->rc = doWalCallbacks(db); if( p->rc!=SQLITE_OK ){ @@ -77401,7 +81388,6 @@ */ SQLITE_API int sqlite3_step(sqlite3_stmt *pStmt){ int rc = SQLITE_OK; /* Result from sqlite3Step() */ - int rc2 = SQLITE_OK; /* Result from sqlite3Reprepare() */ Vdbe *v = (Vdbe*)pStmt; /* the prepared statement */ int cnt = 0; /* Counter to prevent infinite loop of reprepares */ sqlite3 *db; /* The database connection */ @@ -77415,32 +81401,31 @@ while( (rc = sqlite3Step(v))==SQLITE_SCHEMA && cnt++ < SQLITE_MAX_SCHEMA_RETRY ){ int savedPc = v->pc; - rc2 = rc = sqlite3Reprepare(v); - if( rc!=SQLITE_OK) break; + rc = sqlite3Reprepare(v); + if( rc!=SQLITE_OK ){ + /* This case occurs after failing to recompile an sql statement. + ** The error message from the SQL compiler has already been loaded + ** into the database handle. This block copies the error message + ** from the database handle into the statement and sets the statement + ** program counter to 0 to ensure that when the statement is + ** finalized or reset the parser error message is available via + ** sqlite3_errmsg() and sqlite3_errcode(). + */ + const char *zErr = (const char *)sqlite3_value_text(db->pErr); + sqlite3DbFree(db, v->zErrMsg); + if( !db->mallocFailed ){ + v->zErrMsg = sqlite3DbStrDup(db, zErr); + v->rc = rc = sqlite3ApiExit(db, rc); + } else { + v->zErrMsg = 0; + v->rc = rc = SQLITE_NOMEM_BKPT; + } + break; + } sqlite3_reset(pStmt); if( savedPc>=0 ) v->doingRerun = 1; assert( v->expired==0 ); } - if( rc2!=SQLITE_OK ){ - /* This case occurs after failing to recompile an sql statement. - ** The error message from the SQL compiler has already been loaded - ** into the database handle. This block copies the error message - ** from the database handle into the statement and sets the statement - ** program counter to 0 to ensure that when the statement is - ** finalized or reset the parser error message is available via - ** sqlite3_errmsg() and sqlite3_errcode(). - */ - const char *zErr = (const char *)sqlite3_value_text(db->pErr); - sqlite3DbFree(db, v->zErrMsg); - if( !db->mallocFailed ){ - v->zErrMsg = sqlite3DbStrDup(db, zErr); - v->rc = rc2; - } else { - v->zErrMsg = 0; - v->rc = rc = SQLITE_NOMEM_BKPT; - } - } - rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); return rc; } @@ -77471,6 +81456,25 @@ } /* +** If this routine is invoked from within an xColumn method of a virtual +** table, then it returns true if and only if the the call is during an +** UPDATE operation and the value of the column will not be modified +** by the UPDATE. +** +** If this routine is called from any context other than within the +** xColumn method of a virtual table, then the return value is meaningless +** and arbitrary. +** +** Virtual table implements might use this routine to optimize their +** performance by substituting a NULL result, or some other light-weight +** value, as a signal to the xUpdate routine that the column is unchanged. +*/ +SQLITE_API int sqlite3_vtab_nochange(sqlite3_context *p){ + assert( p ); + return sqlite3_value_nochange(p->pOut); +} + +/* ** Return the current time for a statement. If the current time ** is requested more than once within the same run of a single prepared ** statement, the exact same time is returned for each invocation regardless @@ -77494,28 +81498,6 @@ } /* -** The following is the implementation of an SQL function that always -** fails with an error message stating that the function is used in the -** wrong context. The sqlite3_overload_function() API might construct -** SQL function that use this routine so that the functions will exist -** for name resolution but are actually overloaded by the xFindFunction -** method of virtual tables. -*/ -SQLITE_PRIVATE void sqlite3InvalidFunction( - sqlite3_context *context, /* The function calling context */ - int NotUsed, /* Number of arguments to the function */ - sqlite3_value **NotUsed2 /* Value of each argument */ -){ - const char *zName = context->pFunc->zName; - char *zErr; - UNUSED_PARAMETER2(NotUsed, NotUsed2); - zErr = sqlite3_mprintf( - "unable to use function %s in the requested context", zName); - sqlite3_result_error(context, zErr, -1); - sqlite3_free(zErr); -} - -/* ** Create a new aggregate context for p and return a pointer to ** its pMem->z element. */ @@ -77618,10 +81600,7 @@ pAuxData->iAuxArg = iArg; pAuxData->pNextAux = pVdbe->pAuxData; pVdbe->pAuxData = pAuxData; - if( pCtx->fErrorOrAux==0 ){ - pCtx->isError = 0; - pCtx->fErrorOrAux = 1; - } + if( pCtx->isError==0 ) pCtx->isError = -1; }else if( pAuxData->xDeleteAux ){ pAuxData->xDeleteAux(pAuxData->pAux); } @@ -77701,7 +81680,7 @@ /* .xDel = */ (void(*)(void*))0, #ifdef SQLITE_DEBUG /* .pScopyFrom = */ (Mem*)0, - /* .pFiller = */ (void*)0, + /* .mScopyFlags= */ 0, #endif }; return &nullMem; @@ -78377,7 +82356,9 @@ Vdbe *pVdbe = (Vdbe*)pStmt; u32 v; #ifdef SQLITE_ENABLE_API_ARMOR - if( !pStmt ){ + if( !pStmt + || (op!=SQLITE_STMTSTATUS_MEMUSED && (op<0||op>=ArraySize(pVdbe->aCounter))) + ){ (void)SQLITE_MISUSE_BKPT; return 0; } @@ -78431,6 +82412,16 @@ #endif } +#ifdef SQLITE_ENABLE_NORMALIZE +/* +** Return the normalized SQL associated with a prepared statement. +*/ +SQLITE_API const char *sqlite3_normalized_sql(sqlite3_stmt *pStmt){ + Vdbe *p = (Vdbe *)pStmt; + return p ? p->zNormSql : 0; +} +#endif /* SQLITE_ENABLE_NORMALIZE */ + #ifdef SQLITE_ENABLE_PREUPDATE_HOOK /* ** Allocate and populate an UnpackedRecord structure based on the serialized @@ -78446,7 +82437,7 @@ pRet = sqlite3VdbeAllocUnpackedRecord(pKeyInfo); if( pRet ){ - memset(pRet->aMem, 0, sizeof(Mem)*(pKeyInfo->nField+1)); + memset(pRet->aMem, 0, sizeof(Mem)*(pKeyInfo->nKeyField+1)); sqlite3VdbeRecordUnpack(pKeyInfo, nKey, pKey, pRet); } return pRet; @@ -78519,7 +82510,7 @@ */ SQLITE_API int sqlite3_preupdate_count(sqlite3 *db){ PreUpdate *p = db->pPreUpdate; - return (p ? p->keyinfo.nField : 0); + return (p ? p->keyinfo.nKeyField : 0); } #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ @@ -78772,7 +82763,7 @@ Mem *pVar; /* Value of a host parameter */ StrAccum out; /* Accumulate the output here */ #ifndef SQLITE_OMIT_UTF16 - Mem utf8; /* Used to convert UTF16 parameters into UTF8 for display */ + Mem utf8; /* Used to convert UTF16 into UTF8 for display */ #endif char zBase[100]; /* Initial working space */ @@ -78783,17 +82774,17 @@ while( *zRawSql ){ const char *zStart = zRawSql; while( *(zRawSql++)!='\n' && *zRawSql ); - sqlite3StrAccumAppend(&out, "-- ", 3); + sqlite3_str_append(&out, "-- ", 3); assert( (zRawSql - zStart) > 0 ); - sqlite3StrAccumAppend(&out, zStart, (int)(zRawSql-zStart)); + sqlite3_str_append(&out, zStart, (int)(zRawSql-zStart)); } }else if( p->nVar==0 ){ - sqlite3StrAccumAppend(&out, zRawSql, sqlite3Strlen30(zRawSql)); + sqlite3_str_append(&out, zRawSql, sqlite3Strlen30(zRawSql)); }else{ while( zRawSql[0] ){ n = findNextHostParameter(zRawSql, &nToken); assert( n>0 ); - sqlite3StrAccumAppend(&out, zRawSql, n); + sqlite3_str_append(&out, zRawSql, n); zRawSql += n; assert( zRawSql[0] || nToken==0 ); if( nToken==0 ) break; @@ -78819,11 +82810,11 @@ assert( idx>0 && idx<=p->nVar ); pVar = &p->aVar[idx-1]; if( pVar->flags & MEM_Null ){ - sqlite3StrAccumAppend(&out, "NULL", 4); + sqlite3_str_append(&out, "NULL", 4); }else if( pVar->flags & MEM_Int ){ - sqlite3XPrintf(&out, "%lld", pVar->u.i); + sqlite3_str_appendf(&out, "%lld", pVar->u.i); }else if( pVar->flags & MEM_Real ){ - sqlite3XPrintf(&out, "%!.15g", pVar->u.r); + sqlite3_str_appendf(&out, "%!.15g", pVar->u.r); }else if( pVar->flags & MEM_Str ){ int nOut; /* Number of bytes of the string text to include in output */ #ifndef SQLITE_OMIT_UTF16 @@ -78833,7 +82824,7 @@ utf8.db = db; sqlite3VdbeMemSetStr(&utf8, pVar->z, pVar->n, enc, SQLITE_STATIC); if( SQLITE_NOMEM==sqlite3VdbeChangeEncoding(&utf8, SQLITE_UTF8) ){ - out.accError = STRACCUM_NOMEM; + out.accError = SQLITE_NOMEM; out.nAlloc = 0; } pVar = &utf8; @@ -78846,10 +82837,10 @@ while( nOutn && (pVar->z[nOut]&0xc0)==0x80 ){ nOut++; } } #endif - sqlite3XPrintf(&out, "'%.*q'", nOut, pVar->z); + sqlite3_str_appendf(&out, "'%.*q'", nOut, pVar->z); #ifdef SQLITE_TRACE_SIZE_LIMIT if( nOutn ){ - sqlite3XPrintf(&out, "/*+%d bytes*/", pVar->n-nOut); + sqlite3_str_appendf(&out, "/*+%d bytes*/", pVar->n-nOut); } #endif #ifndef SQLITE_OMIT_UTF16 @@ -78856,28 +82847,28 @@ if( enc!=SQLITE_UTF8 ) sqlite3VdbeMemRelease(&utf8); #endif }else if( pVar->flags & MEM_Zero ){ - sqlite3XPrintf(&out, "zeroblob(%d)", pVar->u.nZero); + sqlite3_str_appendf(&out, "zeroblob(%d)", pVar->u.nZero); }else{ int nOut; /* Number of bytes of the blob to include in output */ assert( pVar->flags & MEM_Blob ); - sqlite3StrAccumAppend(&out, "x'", 2); + sqlite3_str_append(&out, "x'", 2); nOut = pVar->n; #ifdef SQLITE_TRACE_SIZE_LIMIT if( nOut>SQLITE_TRACE_SIZE_LIMIT ) nOut = SQLITE_TRACE_SIZE_LIMIT; #endif for(i=0; iz[i]&0xff); + sqlite3_str_appendf(&out, "%02x", pVar->z[i]&0xff); } - sqlite3StrAccumAppend(&out, "'", 1); + sqlite3_str_append(&out, "'", 1); #ifdef SQLITE_TRACE_SIZE_LIMIT if( nOutn ){ - sqlite3XPrintf(&out, "/*+%d bytes*/", pVar->n-nOut); + sqlite3_str_appendf(&out, "/*+%d bytes*/", pVar->n-nOut); } #endif } } } - if( out.accError ) sqlite3StrAccumReset(&out); + if( out.accError ) sqlite3_str_reset(&out); return sqlite3StrAccumFinish(&out); } @@ -79009,32 +83000,56 @@ ** feature is used for test suite validation only and does not appear an ** production builds. ** -** M is an integer, 2 or 3, that indices how many different ways the -** branch can go. It is usually 2. "I" is the direction the branch -** goes. 0 means falls through. 1 means branch is taken. 2 means the -** second alternative branch is taken. +** M is an integer between 2 and 4. 2 indicates a ordinary two-way +** branch (I=0 means fall through and I=1 means taken). 3 indicates +** a 3-way branch where the third way is when one of the operands is +** NULL. 4 indicates the OP_Jump instruction which has three destinations +** depending on whether the first operand is less than, equal to, or greater +** than the second. ** ** iSrcLine is the source code line (from the __LINE__ macro) that -** generated the VDBE instruction. This instrumentation assumes that all -** source code is in a single file (the amalgamation). Special values 1 -** and 2 for the iSrcLine parameter mean that this particular branch is -** always taken or never taken, respectively. +** generated the VDBE instruction combined with flag bits. The source +** code line number is in the lower 24 bits of iSrcLine and the upper +** 8 bytes are flags. The lower three bits of the flags indicate +** values for I that should never occur. For example, if the branch is +** always taken, the flags should be 0x05 since the fall-through and +** alternate branch are never taken. If a branch is never taken then +** flags should be 0x06 since only the fall-through approach is allowed. +** +** Bit 0x04 of the flags indicates an OP_Jump opcode that is only +** interested in equal or not-equal. In other words, I==0 and I==2 +** should be treated the same. +** +** Since only a line number is retained, not the filename, this macro +** only works for amalgamation builds. But that is ok, since these macros +** should be no-ops except for special builds used to measure test coverage. */ #if !defined(SQLITE_VDBE_COVERAGE) # define VdbeBranchTaken(I,M) #else # define VdbeBranchTaken(I,M) vdbeTakeBranch(pOp->iSrcLine,I,M) - static void vdbeTakeBranch(int iSrcLine, u8 I, u8 M){ - if( iSrcLine<=2 && ALWAYS(iSrcLine>0) ){ - M = iSrcLine; - /* Assert the truth of VdbeCoverageAlwaysTaken() and - ** VdbeCoverageNeverTaken() */ - assert( (M & I)==I ); - }else{ - if( sqlite3GlobalConfig.xVdbeBranch==0 ) return; /*NO_TEST*/ - sqlite3GlobalConfig.xVdbeBranch(sqlite3GlobalConfig.pVdbeBranchArg, - iSrcLine,I,M); + static void vdbeTakeBranch(u32 iSrcLine, u8 I, u8 M){ + u8 mNever; + assert( I<=2 ); /* 0: fall through, 1: taken, 2: alternate taken */ + assert( M<=4 ); /* 2: two-way branch, 3: three-way branch, 4: OP_Jump */ + assert( I> 24; + assert( (I & mNever)==0 ); + if( sqlite3GlobalConfig.xVdbeBranch==0 ) return; /*NO_TEST*/ + I |= mNever; + if( M==2 ) I |= 0x04; + if( M==4 ){ + I |= 0x08; + if( (mNever&0x08)!=0 && (I&0x05)!=0) I |= 0x05; /*NO_TEST*/ } + sqlite3GlobalConfig.xVdbeBranch(sqlite3GlobalConfig.pVdbeBranchArg, + iSrcLine&0xffffff, I, M); } #endif @@ -79151,6 +83166,11 @@ pRec->flags |= MEM_Real; if( bTryForInt ) sqlite3VdbeIntegerAffinity(pRec); } + /* TEXT->NUMERIC is many->one. Hence, it is important to invalidate the + ** string representation after computing a numeric equivalent, because the + ** string representation might not be the canonical representation for the + ** numeric value. Ticket [343634942dd54ab57b7024] 2018-01-31. */ + pRec->flags &= ~MEM_Str; } /* @@ -79241,7 +83261,7 @@ if( sqlite3AtoF(pMem->z, &pMem->u.r, pMem->n, pMem->enc)==0 ){ return 0; } - if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==SQLITE_OK ){ + if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==0 ){ return MEM_Int; } return MEM_Real; @@ -79351,7 +83371,7 @@ if( p->flags & MEM_Undefined ){ printf(" undefined"); }else if( p->flags & MEM_Null ){ - printf(" NULL"); + printf(p->flags & MEM_Zero ? " NULL-nochng" : " NULL"); }else if( (p->flags & (MEM_Int|MEM_Str))==(MEM_Int|MEM_Str) ){ printf(" si:%lld", p->u.i); }else if( p->flags & MEM_Int ){ @@ -79360,7 +83380,7 @@ }else if( p->flags & MEM_Real ){ printf(" r:%g", p->u.r); #endif - }else if( p->flags & MEM_RowSet ){ + }else if( sqlite3VdbeMemIsRowSet(p) ){ printf(" (rowset)"); }else{ char zBuf[200]; @@ -79619,7 +83639,7 @@ assert( pOp>=aOp && pOp<&aOp[p->nOp]); #ifdef VDBE_PROFILE - start = sqlite3Hwtime(); + start = sqlite3NProfileCnt ? sqlite3NProfileCnt : sqlite3Hwtime(); #endif nVmStep++; #ifdef SQLITE_ENABLE_STMT_SCANSTATUS @@ -79886,6 +83906,9 @@ */ case OP_HaltIfNull: { /* in3 */ pIn3 = &aMem[pOp->p3]; +#ifdef SQLITE_DEBUG + if( pOp->p2==OE_Abort ){ sqlite3VdbeAssertAbortable(p); } +#endif if( (pIn3->flags & MEM_Null)==0 ) break; /* Fall through into OP_Halt */ } @@ -79925,6 +83948,9 @@ int pcx; pcx = (int)(pOp - aOp); +#ifdef SQLITE_DEBUG + if( pOp->p2==OE_Abort ){ sqlite3VdbeAssertAbortable(p); } +#endif if( pOp->p1==SQLITE_OK && p->pFrame ){ /* Halt the sub-program. Return control to the parent frame. */ pFrame = p->pFrame; @@ -80108,6 +84134,9 @@ assert( pOp->p3<=(p->nMem+1 - p->nCursor) ); pOut->flags = nullFlag = pOp->p1 ? (MEM_Null|MEM_Cleared) : MEM_Null; pOut->n = 0; +#ifdef SQLITE_DEBUG + pOut->uTemp = 0; +#endif while( cnt>0 ){ pOut++; memAboutToChange(p, pOut); @@ -80229,6 +84258,7 @@ pOut = &aMem[pOp->p2]; assert( pOut!=pIn1 ); while( 1 ){ + memAboutToChange(p, pOut); sqlite3VdbeMemShallowCopy(pOut, pIn1, MEM_Ephem); Deephemeralize(pOut); #ifdef SQLITE_DEBUG @@ -80261,7 +84291,8 @@ assert( pOut!=pIn1 ); sqlite3VdbeMemShallowCopy(pOut, pIn1, MEM_Ephem); #ifdef SQLITE_DEBUG - if( pOut->pScopyFrom==0 ) pOut->pScopyFrom = pIn1; + pOut->pScopyFrom = pIn1; + pOut->mScopyFlags = pIn1->flags; #endif break; } @@ -80895,7 +84926,12 @@ if( (flags1 | flags3)&MEM_Str ){ if( (flags1 & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){ applyNumericAffinity(pIn1,0); - testcase( flags3!=pIn3->flags ); /* Possible if pIn1==pIn3 */ + assert( flags3==pIn3->flags ); + /* testcase( flags3!=pIn3->flags ); + ** this used to be possible with pIn1==pIn3, but not since + ** the column cache was removed. The following assignment + ** is essentially a no-op. But, it provides defense-in-depth + ** in case our analysis is incorrect, so it is left in. */ flags3 = pIn3->flags; } if( (flags3 & (MEM_Int|MEM_Real|MEM_Str))==MEM_Str ){ @@ -80931,13 +84967,23 @@ res = sqlite3MemCompare(pIn3, pIn1, pOp->p4.pColl); } compare_op: - switch( pOp->opcode ){ - case OP_Eq: res2 = res==0; break; - case OP_Ne: res2 = res; break; - case OP_Lt: res2 = res<0; break; - case OP_Le: res2 = res<=0; break; - case OP_Gt: res2 = res>0; break; - default: res2 = res>=0; break; + /* At this point, res is negative, zero, or positive if reg[P1] is + ** less than, equal to, or greater than reg[P3], respectively. Compute + ** the answer to this operator in res2, depending on what the comparison + ** operator actually is. The next block of code depends on the fact + ** that the 6 comparison operators are consecutive integers in this + ** order: NE, EQ, GT, LE, LT, GE */ + assert( OP_Eq==OP_Ne+1 ); assert( OP_Gt==OP_Ne+2 ); assert( OP_Le==OP_Ne+3 ); + assert( OP_Lt==OP_Ne+4 ); assert( OP_Ge==OP_Ne+5 ); + if( res<0 ){ /* ne, eq, gt, le, lt, ge */ + static const unsigned char aLTb[] = { 1, 0, 0, 1, 1, 0 }; + res2 = aLTb[pOp->opcode - OP_Ne]; + }else if( res==0 ){ + static const unsigned char aEQb[] = { 0, 1, 0, 1, 0, 1 }; + res2 = aEQb[pOp->opcode - OP_Ne]; + }else{ + static const unsigned char aGTb[] = { 1, 0, 1, 0, 0, 1 }; + res2 = aGTb[pOp->opcode - OP_Ne]; } /* Undo any changes made by applyAffinity() to the input registers. */ @@ -80949,7 +84995,6 @@ if( pOp->p5 & SQLITE_STOREP2 ){ pOut = &aMem[pOp->p2]; iCompare = res; - res2 = res2!=0; /* For this path res2 must be exactly 0 or 1 */ if( (pOp->p5 & SQLITE_KEEPNULL)!=0 ){ /* The KEEPNULL flag prevents OP_Eq from overwriting a NULL with 1 ** and prevents OP_Ne from overwriting NULL with 0. This flag @@ -81080,7 +85125,7 @@ assert( memIsValid(&aMem[p2+idx]) ); REGISTER_TRACE(p1+idx, &aMem[p1+idx]); REGISTER_TRACE(p2+idx, &aMem[p2+idx]); - assert( inField ); + assert( inKeyField ); pColl = pKeyInfo->aColl[i]; bRev = pKeyInfo->aSortOrder[i]; iCompare = sqlite3MemCompare(&aMem[p1+idx], &aMem[p2+idx], pColl); @@ -81100,11 +85145,11 @@ */ case OP_Jump: { /* jump */ if( iCompare<0 ){ - VdbeBranchTaken(0,3); pOp = &aOp[pOp->p1 - 1]; + VdbeBranchTaken(0,4); pOp = &aOp[pOp->p1 - 1]; }else if( iCompare==0 ){ - VdbeBranchTaken(1,3); pOp = &aOp[pOp->p2 - 1]; + VdbeBranchTaken(1,4); pOp = &aOp[pOp->p2 - 1]; }else{ - VdbeBranchTaken(2,3); pOp = &aOp[pOp->p3 - 1]; + VdbeBranchTaken(2,4); pOp = &aOp[pOp->p3 - 1]; } break; } @@ -81134,18 +85179,8 @@ int v1; /* Left operand: 0==FALSE, 1==TRUE, 2==UNKNOWN or NULL */ int v2; /* Right operand: 0==FALSE, 1==TRUE, 2==UNKNOWN or NULL */ - pIn1 = &aMem[pOp->p1]; - if( pIn1->flags & MEM_Null ){ - v1 = 2; - }else{ - v1 = sqlite3VdbeIntValue(pIn1)!=0; - } - pIn2 = &aMem[pOp->p2]; - if( pIn2->flags & MEM_Null ){ - v2 = 2; - }else{ - v2 = sqlite3VdbeIntValue(pIn2)!=0; - } + v1 = sqlite3VdbeBooleanValue(&aMem[pOp->p1], 2); + v2 = sqlite3VdbeBooleanValue(&aMem[pOp->p2], 2); if( pOp->opcode==OP_And ){ static const unsigned char and_logic[] = { 0, 0, 0, 0, 1, 2, 0, 2, 2 }; v1 = and_logic[v1*3+v2]; @@ -81163,6 +85198,35 @@ break; } +/* Opcode: IsTrue P1 P2 P3 P4 * +** Synopsis: r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4 +** +** This opcode implements the IS TRUE, IS FALSE, IS NOT TRUE, and +** IS NOT FALSE operators. +** +** Interpret the value in register P1 as a boolean value. Store that +** boolean (a 0 or 1) in register P2. Or if the value in register P1 is +** NULL, then the P3 is stored in register P2. Invert the answer if P4 +** is 1. +** +** The logic is summarized like this: +** +**
        +**
      • If P3==0 and P4==0 then r[P2] := r[P1] IS TRUE +**
      • If P3==1 and P4==1 then r[P2] := r[P1] IS FALSE +**
      • If P3==0 and P4==1 then r[P2] := r[P1] IS NOT TRUE +**
      • If P3==1 and P4==0 then r[P2] := r[P1] IS NOT FALSE +**
      +*/ +case OP_IsTrue: { /* in1, out2 */ + assert( pOp->p4type==P4_INT32 ); + assert( pOp->p4.i==0 || pOp->p4.i==1 ); + assert( pOp->p3==0 || pOp->p3==1 ); + sqlite3VdbeMemSetInt64(&aMem[pOp->p2], + sqlite3VdbeBooleanValue(&aMem[pOp->p1], pOp->p3) ^ pOp->p4.i); + break; +} + /* Opcode: Not P1 P2 * * * ** Synopsis: r[P2]= !r[P1] ** @@ -81173,16 +85237,16 @@ case OP_Not: { /* same as TK_NOT, in1, out2 */ pIn1 = &aMem[pOp->p1]; pOut = &aMem[pOp->p2]; - sqlite3VdbeMemSetNull(pOut); if( (pIn1->flags & MEM_Null)==0 ){ - pOut->flags = MEM_Int; - pOut->u.i = !sqlite3VdbeIntValue(pIn1); + sqlite3VdbeMemSetInt64(pOut, !sqlite3VdbeBooleanValue(pIn1,0)); + }else{ + sqlite3VdbeMemSetNull(pOut); } break; } /* Opcode: BitNot P1 P2 * * * -** Synopsis: r[P1]= ~r[P1] +** Synopsis: r[P2]= ~r[P1] ** ** Interpret the content of register P1 as an integer. Store the ** ones-complement of the P1 value into register P2. If P1 holds @@ -81243,6 +85307,14 @@ ** is considered true if it is numeric and non-zero. If the value ** in P1 is NULL then take the jump if and only if P3 is non-zero. */ +case OP_If: { /* jump, in1 */ + int c; + c = sqlite3VdbeBooleanValue(&aMem[pOp->p1], pOp->p3); + VdbeBranchTaken(c!=0, 2); + if( c ) goto jump_to_p2; + break; +} + /* Opcode: IfNot P1 P2 P3 * * ** ** Jump to P2 if the value in register P1 is False. The value @@ -81249,24 +85321,11 @@ ** is considered false if it has a numeric value of zero. If the value ** in P1 is NULL then take the jump if and only if P3 is non-zero. */ -case OP_If: /* jump, in1 */ case OP_IfNot: { /* jump, in1 */ int c; - pIn1 = &aMem[pOp->p1]; - if( pIn1->flags & MEM_Null ){ - c = pOp->p3; - }else{ -#ifdef SQLITE_OMIT_FLOATING_POINT - c = sqlite3VdbeIntValue(pIn1)!=0; -#else - c = sqlite3VdbeRealValue(pIn1)!=0.0; -#endif - if( pOp->opcode==OP_IfNot ) c = !c; - } + c = !sqlite3VdbeBooleanValue(&aMem[pOp->p1], !pOp->p3); VdbeBranchTaken(c!=0, 2); - if( c ){ - goto jump_to_p2; - } + if( c ) goto jump_to_p2; break; } @@ -81316,6 +85375,36 @@ break; } +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC +/* Opcode: Offset P1 P2 P3 * * +** Synopsis: r[P3] = sqlite_offset(P1) +** +** Store in register r[P3] the byte offset into the database file that is the +** start of the payload for the record at which that cursor P1 is currently +** pointing. +** +** P2 is the column number for the argument to the sqlite_offset() function. +** This opcode does not use P2 itself, but the P2 value is used by the +** code generator. The P1, P2, and P3 operands to this opcode are the +** same as for OP_Column. +** +** This opcode is only available if SQLite is compiled with the +** -DSQLITE_ENABLE_OFFSET_SQL_FUNC option. +*/ +case OP_Offset: { /* out3 */ + VdbeCursor *pC; /* The VDBE cursor */ + assert( pOp->p1>=0 && pOp->p1nCursor ); + pC = p->apCsr[pOp->p1]; + pOut = &p->aMem[pOp->p3]; + if( NEVER(pC==0) || pC->eCurType!=CURTYPE_BTREE ){ + sqlite3VdbeMemSetNull(pOut); + }else{ + sqlite3VdbeMemSetInt64(pOut, sqlite3BtreeOffset(pC->uc.pCursor)); + } + break; +} +#endif /* SQLITE_ENABLE_OFFSET_SQL_FUNC */ + /* Opcode: Column P1 P2 P3 P4 P5 ** Synopsis: r[P3]=PX ** @@ -81353,9 +85442,7 @@ const u8 *zData; /* Part of the record being decoded */ const u8 *zHdr; /* Next unparsed byte of the header */ const u8 *zEndHdr; /* Pointer to first byte after the header */ - u32 offset; /* Offset into the data */ u64 offset64; /* 64-bit offset */ - u32 avail; /* Number of bytes of available data */ u32 t; /* A type code from the record header */ Mem *pReg; /* PseudoTable input register */ @@ -81382,11 +85469,13 @@ if( pC->cacheStatus!=p->cacheCtr ){ /*OPTIMIZATION-IF-FALSE*/ if( pC->nullRow ){ if( pC->eCurType==CURTYPE_PSEUDO ){ - assert( pC->uc.pseudoTableReg>0 ); - pReg = &aMem[pC->uc.pseudoTableReg]; + /* For the special case of as pseudo-cursor, the seekResult field + ** identifies the register that holds the record */ + assert( pC->seekResult>0 ); + pReg = &aMem[pC->seekResult]; assert( pReg->flags & MEM_Blob ); assert( memIsValid(pReg) ); - pC->payloadSize = pC->szRow = avail = pReg->n; + pC->payloadSize = pC->szRow = pReg->n; pC->aRow = (u8*)pReg->z; }else{ sqlite3VdbeMemSetNull(pDest); @@ -81398,23 +85487,19 @@ assert( pCrsr ); assert( sqlite3BtreeCursorIsValid(pCrsr) ); pC->payloadSize = sqlite3BtreePayloadSize(pCrsr); - pC->aRow = sqlite3BtreePayloadFetch(pCrsr, &avail); - assert( avail<=65536 ); /* Maximum page size is 64KiB */ - if( pC->payloadSize <= (u32)avail ){ - pC->szRow = pC->payloadSize; - }else if( pC->payloadSize > (u32)db->aLimit[SQLITE_LIMIT_LENGTH] ){ + pC->aRow = sqlite3BtreePayloadFetch(pCrsr, &pC->szRow); + assert( pC->szRow<=pC->payloadSize ); + assert( pC->szRow<=65536 ); /* Maximum page size is 64KiB */ + if( pC->payloadSize > (u32)db->aLimit[SQLITE_LIMIT_LENGTH] ){ goto too_big; - }else{ - pC->szRow = avail; } } pC->cacheStatus = p->cacheCtr; - pC->iHdrOffset = getVarint32(pC->aRow, offset); + pC->iHdrOffset = getVarint32(pC->aRow, aOffset[0]); pC->nHdrParsed = 0; - aOffset[0] = offset; - if( availszRowaRow does not have to hold the entire row, but it does at least ** need to cover the header of the record. If pC->aRow does not contain ** the complete header, then set it to zero, forcing the header to be @@ -81431,17 +85516,26 @@ ** 3-byte type for each of the maximum of 32768 columns plus three ** extra bytes for the header length itself. 32768*3 + 3 = 98307. */ - if( offset > 98307 || offset > pC->payloadSize ){ - rc = SQLITE_CORRUPT_BKPT; - goto abort_due_to_error; + if( aOffset[0] > 98307 || aOffset[0] > pC->payloadSize ){ + goto op_column_corrupt; } - }else if( offset>0 ){ /*OPTIMIZATION-IF-TRUE*/ - /* The following goto is an optimization. It can be omitted and - ** everything will still work. But OP_Column is measurably faster - ** by skipping the subsequent conditional, which is always true. + }else{ + /* This is an optimization. By skipping over the first few tests + ** (ex: pC->nHdrParsed<=p2) in the next section, we achieve a + ** measurable performance gain. + ** + ** This branch is taken even if aOffset[0]==0. Such a record is never + ** generated by SQLite, and could be considered corruption, but we + ** accept it for historical reasons. When aOffset[0]==0, the code this + ** branch jumps to reads past the end of the record, but never more + ** than a few bytes. Even if the record occurs at the end of the page + ** content area, the "page header" comes after the page content and so + ** this overread is harmless. Similar overreads can occur for a corrupt + ** database file. */ zData = pC->aRow; assert( pC->nHdrParsed<=p2 ); /* Conditional skipped */ + testcase( aOffset[0]==0 ); goto op_column_read_header; } } @@ -81470,6 +85564,7 @@ offset64 = aOffset[i]; zHdr = zData + pC->iHdrOffset; zEndHdr = zData + aOffset[0]; + testcase( zHdr>=zEndHdr ); do{ if( (t = zHdr[0])<0x80 ){ zHdr++; @@ -81490,9 +85585,13 @@ if( (zHdr>=zEndHdr && (zHdr>zEndHdr || offset64!=pC->payloadSize)) || (offset64 > pC->payloadSize) ){ - if( pC->aRow==0 ) sqlite3VdbeMemRelease(&sMem); - rc = SQLITE_CORRUPT_BKPT; - goto abort_due_to_error; + if( aOffset[0]==0 ){ + i = 0; + zHdr = zEndHdr; + }else{ + if( pC->aRow==0 ) sqlite3VdbeMemRelease(&sMem); + goto op_column_corrupt; + } } pC->nHdrParsed = i; @@ -81586,6 +85685,15 @@ UPDATE_MAX_BLOBSIZE(pDest); REGISTER_TRACE(pOp->p3, pDest); break; + +op_column_corrupt: + if( aOp[0].p3>0 ){ + pOp = &aOp[aOp[0].p3-1]; + break; + }else{ + rc = SQLITE_CORRUPT_BKPT; + goto abort_due_to_error; + } } /* Opcode: Affinity P1 P2 * P4 * @@ -81710,9 +85818,18 @@ pRec = pLast; do{ assert( memIsValid(pRec) ); - pRec->uTemp = serial_type = sqlite3VdbeSerialType(pRec, file_format, &len); + serial_type = sqlite3VdbeSerialType(pRec, file_format, &len); if( pRec->flags & MEM_Zero ){ - if( nData ){ + if( serial_type==0 ){ + /* Values with MEM_Null and MEM_Zero are created by xColumn virtual + ** table methods that never invoke sqlite3_result_xxxxx() while + ** computing an unchanging column value in an UPDATE statement. + ** Give such values a special internal-use-only serial-type of 10 + ** so that they can be passed through to xUpdate and have + ** a true sqlite3_value_nochange(). */ + assert( pOp->p5==OPFLAG_NOCHNG_MAGIC || CORRUPT_DB ); + serial_type = 10; + }else if( nData ){ if( sqlite3VdbeMemExpandBlob(pRec) ) goto no_mem; }else{ nZero += pRec->u.nZero; @@ -81723,6 +85840,7 @@ testcase( serial_type==127 ); testcase( serial_type==128 ); nHdr += serial_type<=127 ? 1 : sqlite3VarintLen(serial_type); + pRec->uTemp = serial_type; if( pRec==pData0 ) break; pRec--; }while(1); @@ -81743,9 +85861,6 @@ if( nVarintdb->aLimit[SQLITE_LIMIT_LENGTH] ){ - goto too_big; - } /* Make sure the output register has a buffer large enough to store ** the new record. The output register (pOp->p3) is not allowed to @@ -81752,8 +85867,19 @@ ** be one of the input registers (because the following call to ** sqlite3VdbeMemClearAndResize() could clobber the value before it is used). */ - if( sqlite3VdbeMemClearAndResize(pOut, (int)nByte) ){ - goto no_mem; + if( nByte+nZero<=pOut->szMalloc ){ + /* The output register is already large enough to hold the record. + ** No error checks or buffer enlargement is required */ + pOut->z = pOut->zMalloc; + }else{ + /* Need to make sure that the output is not too big and then enlarge + ** the output register to hold the full result */ + if( nByte+nZero>db->aLimit[SQLITE_LIMIT_LENGTH] ){ + goto too_big; + } + if( sqlite3VdbeMemClearAndResize(pOut, (int)nByte) ){ + goto no_mem; + } } zNewRecord = (u8 *)pOut->z; @@ -81926,7 +86052,7 @@ int isSchemaChange; iSavepoint = db->nSavepoint - iSavepoint - 1; if( p1==SAVEPOINT_ROLLBACK ){ - isSchemaChange = (db->flags & SQLITE_InternChanges)!=0; + isSchemaChange = (db->mDbFlags & DBFLAG_SchemaChange)!=0; for(ii=0; iinDb; ii++){ rc = sqlite3BtreeTripAllCursors(db->aDb[ii].pBt, SQLITE_ABORT_ROLLBACK, @@ -81943,9 +86069,9 @@ } } if( isSchemaChange ){ - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, 0); sqlite3ResetAllSchemasOfConnection(db); - db->flags = (db->flags | SQLITE_InternChanges); + db->mDbFlags |= DBFLAG_SchemaChange; } } @@ -82085,8 +86211,7 @@ */ case OP_Transaction: { Btree *pBt; - int iMeta; - int iGen; + int iMeta = 0; assert( p->bIsReader ); assert( p->readOnly==0 || pOp->p2==0 ); @@ -82099,7 +86224,7 @@ pBt = db->aDb[pOp->p1].pBt; if( pBt ){ - rc = sqlite3BtreeBeginTrans(pBt, pOp->p2); + rc = sqlite3BtreeBeginTrans(pBt, pOp->p2, &iMeta); testcase( rc==SQLITE_BUSY_SNAPSHOT ); testcase( rc==SQLITE_BUSY_RECOVERY ); if( rc!=SQLITE_OK ){ @@ -82132,19 +86257,17 @@ p->nStmtDefCons = db->nDeferredCons; p->nStmtDefImmCons = db->nDeferredImmCons; } - - /* Gather the schema version number for checking: + } + assert( pOp->p5==0 || pOp->p4type==P4_INT32 ); + if( pOp->p5 + && (iMeta!=pOp->p3 + || db->aDb[pOp->p1].pSchema->iGeneration!=pOp->p4.i) + ){ + /* ** IMPLEMENTATION-OF: R-03189-51135 As each SQL statement runs, the schema ** version is checked to ensure that the schema has not changed since the ** SQL statement was prepared. */ - sqlite3BtreeGetMeta(pBt, BTREE_SCHEMA_VERSION, (u32 *)&iMeta); - iGen = db->aDb[pOp->p1].pSchema->iGeneration; - }else{ - iGen = iMeta = 0; - } - assert( pOp->p5==0 || pOp->p4type==P4_INT32 ); - if( pOp->p5 && (iMeta!=pOp->p3 || iGen!=pOp->p4.i) ){ sqlite3DbFree(db, p->zErrMsg); p->zErrMsg = sqlite3DbStrDup(db, "database schema has changed"); /* If the schema-cookie from the database file matches the cookie @@ -82213,6 +86336,8 @@ */ case OP_SetCookie: { Db *pDb; + + sqlite3VdbeIncrWriteCounter(p, 0); assert( pOp->p2p1>=0 && pOp->p1nDb ); assert( DbMaskTest(p->btreeMask, pOp->p1) ); @@ -82225,7 +86350,7 @@ if( pOp->p2==BTREE_SCHEMA_VERSION ){ /* When the schema cookie changes, record the new cookie internally */ pDb->pSchema->schema_cookie = pOp->p3; - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; }else if( pOp->p2==BTREE_FILE_FORMAT ){ /* Record changes in the file format */ pDb->pSchema->file_format = pOp->p3; @@ -82233,7 +86358,7 @@ if( pOp->p1==1 ){ /* Invalidate all prepared statements whenever the TEMP database ** schema is changed. Ticket #1644 */ - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, 0); p->expired = 0; } if( rc ) goto abort_due_to_error; @@ -82251,23 +86376,20 @@ ** values need not be contiguous but all P1 values should be small integers. ** It is an error for P1 to be negative. ** -** If P5!=0 then use the content of register P2 as the root page, not -** the value of P2 itself. +** Allowed P5 bits: +**
        +**
      • 0x02 OPFLAG_SEEKEQ: This cursor will only be used for +** equality lookups (implemented as a pair of opcodes OP_SeekGE/OP_IdxGT +** of OP_SeekLE/OP_IdxGT) +**
      ** -** There will be a read lock on the database whenever there is an -** open cursor. If the database was unlocked prior to this instruction -** then a read lock is acquired as part of this instruction. A read -** lock allows other processes to read the database but prohibits -** any other process from modifying the database. The read lock is -** released when all cursors are closed. If this instruction attempts -** to get a read lock but fails, the script terminates with an -** SQLITE_BUSY error code. -** ** The P4 value may be either an integer (P4_INT32) or a pointer to ** a KeyInfo structure (P4_KEYINFO). If it is a pointer to a KeyInfo -** structure, then said structure defines the content and collating -** sequence of the index being opened. Otherwise, if P4 is an integer -** value, it is set to the number of columns in the table. +** object, then table being opened must be an [index b-tree] where the +** KeyInfo object defines the content and collating +** sequence of that index b-tree. Otherwise, if P4 is an integer +** value, then the table being opened must be a [table b-tree] with a +** number of columns no less than the value of P4. ** ** See also: OpenWrite, ReopenIdx */ @@ -82274,36 +86396,58 @@ /* Opcode: ReopenIdx P1 P2 P3 P4 P5 ** Synopsis: root=P2 iDb=P3 ** -** The ReopenIdx opcode works exactly like ReadOpen except that it first -** checks to see if the cursor on P1 is already open with a root page -** number of P2 and if it is this opcode becomes a no-op. In other words, +** The ReopenIdx opcode works like OP_OpenRead except that it first +** checks to see if the cursor on P1 is already open on the same +** b-tree and if it is this opcode becomes a no-op. In other words, ** if the cursor is already open, do not reopen it. ** -** The ReopenIdx opcode may only be used with P5==0 and with P4 being -** a P4_KEYINFO object. Furthermore, the P3 value must be the same as -** every other ReopenIdx or OpenRead for the same cursor number. +** The ReopenIdx opcode may only be used with P5==0 or P5==OPFLAG_SEEKEQ +** and with P4 being a P4_KEYINFO object. Furthermore, the P3 value must +** be the same as every other ReopenIdx or OpenRead for the same cursor +** number. ** -** See the OpenRead opcode documentation for additional information. +** Allowed P5 bits: +**
        +**
      • 0x02 OPFLAG_SEEKEQ: This cursor will only be used for +** equality lookups (implemented as a pair of opcodes OP_SeekGE/OP_IdxGT +** of OP_SeekLE/OP_IdxGT) +**
      +** +** See also: OP_OpenRead, OP_OpenWrite */ /* Opcode: OpenWrite P1 P2 P3 P4 P5 ** Synopsis: root=P2 iDb=P3 ** ** Open a read/write cursor named P1 on the table or index whose root -** page is P2. Or if P5!=0 use the content of register P2 to find the -** root page. +** page is P2 (or whose root page is held in register P2 if the +** OPFLAG_P2ISREG bit is set in P5 - see below). ** ** The P4 value may be either an integer (P4_INT32) or a pointer to ** a KeyInfo structure (P4_KEYINFO). If it is a pointer to a KeyInfo -** structure, then said structure defines the content and collating -** sequence of the index being opened. Otherwise, if P4 is an integer -** value, it is set to the number of columns in the table, or to the -** largest index of any column of the table that is actually used. +** object, then table being opened must be an [index b-tree] where the +** KeyInfo object defines the content and collating +** sequence of that index b-tree. Otherwise, if P4 is an integer +** value, then the table being opened must be a [table b-tree] with a +** number of columns no less than the value of P4. ** -** This instruction works just like OpenRead except that it opens the cursor -** in read/write mode. For a given table, there can be one or more read-only -** cursors or a single read/write cursor but not both. +** Allowed P5 bits: +**
        +**
      • 0x02 OPFLAG_SEEKEQ: This cursor will only be used for +** equality lookups (implemented as a pair of opcodes OP_SeekGE/OP_IdxGT +** of OP_SeekLE/OP_IdxGT) +**
      • 0x08 OPFLAG_FORDELETE: This cursor is used only to seek +** and subsequently delete entries in an index btree. This is a +** hint to the storage engine that the storage engine is allowed to +** ignore. The hint is not used by the official SQLite b*tree storage +** engine, but is used by COMDB2. +**
      • 0x10 OPFLAG_P2ISREG: Use the content of register P2 +** as the root page, not the value of P2 itself. +**
      ** -** See also OpenRead. +** This instruction works like OpenRead except that it opens the cursor +** in read/write mode. +** +** See also: OP_OpenRead, OP_ReopenIdx */ case OP_ReopenIdx: { int nField; @@ -82332,7 +86476,7 @@ assert( pOp->opcode==OP_OpenRead || pOp->opcode==OP_ReopenIdx || p->readOnly==0 ); - if( p->expired ){ + if( p->expired==1 ){ rc = SQLITE_ABORT_ROLLBACK; goto abort_due_to_error; } @@ -82359,12 +86503,13 @@ if( pOp->p5 & OPFLAG_P2ISREG ){ assert( p2>0 ); assert( p2<=(p->nMem+1 - p->nCursor) ); + assert( pOp->opcode==OP_OpenWrite ); pIn2 = &aMem[p2]; assert( memIsValid(pIn2) ); assert( (pIn2->flags & MEM_Int)!=0 ); sqlite3VdbeMemIntegerify(pIn2); p2 = (int)pIn2->u.i; - /* The p2 value always comes from a prior OP_CreateTable opcode and + /* The p2 value always comes from a prior OP_CreateBtree opcode and ** that opcode will always set the p2 value to 2 or more or else fail. ** If there were a failure, the prepared statement would have halted ** before reaching this instruction. */ @@ -82374,7 +86519,7 @@ pKeyInfo = pOp->p4.pKeyInfo; assert( pKeyInfo->enc==ENC(db) ); assert( pKeyInfo->db==db ); - nField = pKeyInfo->nField+pKeyInfo->nXField; + nField = pKeyInfo->nAllField; }else if( pOp->p4type==P4_INT32 ){ nField = pOp->p4.i; } @@ -82487,7 +86632,7 @@ rc = sqlite3BtreeOpen(db->pVfs, 0, db, &pCx->pBtx, BTREE_OMIT_JOURNAL | BTREE_SINGLE | pOp->p5, vfsFlags); if( rc==SQLITE_OK ){ - rc = sqlite3BtreeBeginTrans(pCx->pBtx, 1); + rc = sqlite3BtreeBeginTrans(pCx->pBtx, 1, 0); } if( rc==SQLITE_OK ){ /* If a transient index is required, create it by calling @@ -82585,8 +86730,13 @@ pCx = allocateCursor(p, pOp->p1, pOp->p3, -1, CURTYPE_PSEUDO); if( pCx==0 ) goto no_mem; pCx->nullRow = 1; - pCx->uc.pseudoTableReg = pOp->p2; + pCx->seekResult = pOp->p2; pCx->isTable = 1; + /* Give this pseudo-cursor a fake BtCursor pointer so that pCx + ** can be safely passed to sqlite3VdbeCursorMoveto(). This avoids a test + ** for pCx->eCurType==CURTYPE_BTREE inside of sqlite3VdbeCursorMoveto() + ** which is a performance optimization */ + pCx->uc.pCursor = sqlite3BtreeFakeValidCursor(); assert( pOp->p5==0 ); break; } @@ -82709,10 +86859,10 @@ ** ** See also: Found, NotFound, SeekGt, SeekGe, SeekLt */ -case OP_SeekLT: /* jump, in3 */ -case OP_SeekLE: /* jump, in3 */ -case OP_SeekGE: /* jump, in3 */ -case OP_SeekGT: { /* jump, in3 */ +case OP_SeekLT: /* jump, in3, group */ +case OP_SeekLE: /* jump, in3, group */ +case OP_SeekGE: /* jump, in3, group */ +case OP_SeekGT: { /* jump, in3, group */ int res; /* Comparison result */ int oc; /* Opcode */ VdbeCursor *pC; /* The cursor to seek */ @@ -82890,6 +87040,25 @@ break; } +/* Opcode: SeekHit P1 P2 * * * +** Synopsis: seekHit=P2 +** +** Set the seekHit flag on cursor P1 to the value in P2. +** The seekHit flag is used by the IfNoHope opcode. +** +** P1 must be a valid b-tree cursor. P2 must be a boolean value, +** either 0 or 1. +*/ +case OP_SeekHit: { + VdbeCursor *pC; + assert( pOp->p1>=0 && pOp->p1nCursor ); + pC = p->apCsr[pOp->p1]; + assert( pC!=0 ); + assert( pOp->p2==0 || pOp->p2==1 ); + pC->seekHit = pOp->p2 & 1; + break; +} + /* Opcode: Found P1 P2 P3 P4 * ** Synopsis: key=r[P3@P4] ** @@ -82924,8 +87093,35 @@ ** advanced in either direction. In other words, the Next and Prev ** opcodes do not work after this operation. ** -** See also: Found, NotExists, NoConflict +** See also: Found, NotExists, NoConflict, IfNoHope */ +/* Opcode: IfNoHope P1 P2 P3 P4 * +** Synopsis: key=r[P3@P4] +** +** Register P3 is the first of P4 registers that form an unpacked +** record. +** +** Cursor P1 is on an index btree. If the seekHit flag is set on P1, then +** this opcode is a no-op. But if the seekHit flag of P1 is clear, then +** check to see if there is any entry in P1 that matches the +** prefix identified by P3 and P4. If no entry matches the prefix, +** jump to P2. Otherwise fall through. +** +** This opcode behaves like OP_NotFound if the seekHit +** flag is clear and it behaves like OP_Noop if the seekHit flag is set. +** +** This opcode is used in IN clause processing for a multi-column key. +** If an IN clause is attached to an element of the key other than the +** left-most element, and if there are no matches on the most recent +** seek over the whole key, then it might be that one of the key element +** to the left is prohibiting a match, and hence there is "no hope" of +** any match regardless of how many IN clause elements are checked. +** In such a case, we abandon the IN clause search early, using this +** opcode. The opcode name comes from the fact that the +** jump is taken if there is "no hope" of achieving a match. +** +** See also: NotFound, SeekHit +*/ /* Opcode: NoConflict P1 P2 P3 P4 * ** Synopsis: key=r[P3@P4] ** @@ -82949,6 +87145,14 @@ ** ** See also: NotFound, Found, NotExists */ +case OP_IfNoHope: { /* jump, in3 */ + VdbeCursor *pC; + assert( pOp->p1>=0 && pOp->p1nCursor ); + pC = p->apCsr[pOp->p1]; + assert( pC!=0 ); + if( pC->seekHit ) break; + /* Fall through into OP_NotFound */ +} case OP_NoConflict: /* jump, in3 */ case OP_NotFound: /* jump, in3 */ case OP_Found: { /* jump, in3 */ @@ -83086,18 +87290,26 @@ pIn3 = &aMem[pOp->p3]; if( (pIn3->flags & MEM_Int)==0 ){ + /* Make sure pIn3->u.i contains a valid integer representation of + ** the key value, but do not change the datatype of the register, as + ** other parts of the perpared statement might be depending on the + ** current datatype. */ + u16 origFlags = pIn3->flags; + int isNotInt; applyAffinity(pIn3, SQLITE_AFF_NUMERIC, encoding); - if( (pIn3->flags & MEM_Int)==0 ) goto jump_to_p2; + isNotInt = (pIn3->flags & MEM_Int)==0; + pIn3->flags = origFlags; + if( isNotInt ) goto jump_to_p2; } /* Fall through into OP_NotExists */ case OP_NotExists: /* jump, in3 */ pIn3 = &aMem[pOp->p3]; - assert( pIn3->flags & MEM_Int ); + assert( (pIn3->flags & MEM_Int)!=0 || pOp->opcode==OP_SeekRowid ); assert( pOp->p1>=0 && pOp->p1nCursor ); pC = p->apCsr[pOp->p1]; assert( pC!=0 ); #ifdef SQLITE_DEBUG - pC->seekOp = 0; + pC->seekOp = OP_SeekRowid; #endif assert( pC->isTable ); assert( pC->eCurType==CURTYPE_BTREE ); @@ -83172,6 +87384,7 @@ assert( pOp->p1>=0 && pOp->p1nCursor ); pC = p->apCsr[pOp->p1]; assert( pC!=0 ); + assert( pC->isTable ); assert( pC->eCurType==CURTYPE_BTREE ); assert( pC->uc.pCursor!=0 ); { @@ -83328,10 +87541,8 @@ int seekResult; /* Result of prior seek or 0 if no USESEEKRESULT flag */ const char *zDb; /* database name - used by the update hook */ Table *pTab; /* Table structure - used by update and pre-update hooks */ - int op; /* Opcode for update hook: SQLITE_UPDATE or SQLITE_INSERT */ BtreePayload x; /* Payload to be inserted */ - op = 0; pData = &aMem[pOp->p2]; assert( pOp->p1>=0 && pOp->p1nCursor ); assert( memIsValid(pData) ); @@ -83342,6 +87553,7 @@ assert( (pOp->p5 & OPFLAG_ISNOOP) || pC->isTable ); assert( pOp->p4type==P4_TABLE || pOp->p4type>=P4_STATIC ); REGISTER_TRACE(pOp->p2, pData); + sqlite3VdbeIncrWriteCounter(p, pC); if( pOp->opcode==OP_Insert ){ pKey = &aMem[pOp->p3]; @@ -83359,19 +87571,21 @@ zDb = db->aDb[pC->iDb].zDbSName; pTab = pOp->p4.pTab; assert( (pOp->p5 & OPFLAG_ISNOOP) || HasRowid(pTab) ); - op = ((pOp->p5 & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_INSERT); }else{ - pTab = 0; /* Not needed. Silence a compiler warning. */ + pTab = 0; zDb = 0; /* Not needed. Silence a compiler warning. */ } #ifdef SQLITE_ENABLE_PREUPDATE_HOOK /* Invoke the pre-update hook, if any */ - if( db->xPreUpdateCallback - && pOp->p4type==P4_TABLE - && !(pOp->p5 & OPFLAG_ISUPDATE) - ){ - sqlite3VdbePreUpdateHook(p, pC, SQLITE_INSERT, zDb, pTab, x.nKey, pOp->p2); + if( pTab ){ + if( db->xPreUpdateCallback && !(pOp->p5 & OPFLAG_ISUPDATE) ){ + sqlite3VdbePreUpdateHook(p, pC, SQLITE_INSERT, zDb, pTab, x.nKey,pOp->p2); + } + if( db->xUpdateCallback==0 || pTab->aCol==0 ){ + /* Prevent post-update hook from running in cases when it should not */ + pTab = 0; + } } if( pOp->p5 & OPFLAG_ISNOOP ) break; #endif @@ -83378,14 +87592,9 @@ if( pOp->p5 & OPFLAG_NCHANGE ) p->nChange++; if( pOp->p5 & OPFLAG_LASTROWID ) db->lastRowid = x.nKey; - if( pData->flags & MEM_Null ){ - x.pData = 0; - x.nData = 0; - }else{ - assert( pData->flags & (MEM_Blob|MEM_Str) ); - x.pData = pData->z; - x.nData = pData->n; - } + assert( pData->flags & (MEM_Blob|MEM_Str) ); + x.pData = pData->z; + x.nData = pData->n; seekResult = ((pOp->p5 & OPFLAG_USESEEKRESULT) ? pC->seekResult : 0); if( pData->flags & MEM_Zero ){ x.nZero = pData->u.nZero; @@ -83401,8 +87610,12 @@ /* Invoke the update-hook if required. */ if( rc ) goto abort_due_to_error; - if( db->xUpdateCallback && op ){ - db->xUpdateCallback(db->pUpdateArg, op, zDb, pTab->zName, x.nKey); + if( pTab ){ + assert( db->xUpdateCallback!=0 ); + assert( pTab->aCol!=0 ); + db->xUpdateCallback(db->pUpdateArg, + (pOp->p5 & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_INSERT, + zDb, pTab->zName, x.nKey); } break; } @@ -83455,6 +87668,7 @@ assert( pC->eCurType==CURTYPE_BTREE ); assert( pC->uc.pCursor!=0 ); assert( pC->deferredMoveto==0 ); + sqlite3VdbeIncrWriteCounter(p, pC); #ifdef SQLITE_DEBUG if( pOp->p4type==P4_TABLE && HasRowid(pOp->p4.pTab) && pOp->p5==0 ){ @@ -83623,10 +87837,10 @@ ** If the P1 cursor must be pointing to a valid row (not a NULL row) ** of a real table, not a pseudo-table. ** -** If P3!=0 then this opcode is allowed to make an ephermeral pointer +** If P3!=0 then this opcode is allowed to make an ephemeral pointer ** into the database page. That means that the content of the output ** register will be invalidated as soon as the cursor moves - including -** moves caused by other cursors that "save" the the current cursors +** moves caused by other cursors that "save" the current cursors ** position in order that they can write to the same table. If P3==0 ** then a copy of the data is made into memory. P3!=0 is faster, but ** P3==0 is safer. @@ -83749,11 +87963,24 @@ assert( pC->uc.pCursor!=0 ); sqlite3BtreeClearCursor(pC->uc.pCursor); } +#ifdef SQLITE_DEBUG + if( pC->seekOp==0 ) pC->seekOp = OP_NullRow; +#endif break; } -/* Opcode: Last P1 P2 P3 * * +/* Opcode: SeekEnd P1 * * * * ** +** Position cursor P1 at the end of the btree for the purpose of +** appending a new entry onto the btree. +** +** It is assumed that the cursor is used only for appending and so +** if the cursor is valid, then the cursor must already be pointing +** at the end of the btree and so no changes are made to +** the cursor. +*/ +/* Opcode: Last P1 P2 * * * +** ** The next use of the Rowid or Column or Prev instruction for P1 ** will refer to the last entry in the database table or index. ** If the table or index is empty and P2>0, then jump immediately to P2. @@ -83763,14 +87990,8 @@ ** This opcode leaves the cursor configured to move in reverse order, ** from the end toward the beginning. In other words, the cursor is ** configured to use Prev, not Next. -** -** If P3 is -1, then the cursor is positioned at the end of the btree -** for the purpose of appending a new entry onto the btree. In that -** case P2 must be 0. It is assumed that the cursor is used only for -** appending and so if the cursor is valid, then the cursor must already -** be pointing at the end of the btree and so no changes are made to -** the cursor. */ +case OP_SeekEnd: case OP_Last: { /* jump */ VdbeCursor *pC; BtCursor *pCrsr; @@ -83783,23 +88004,25 @@ pCrsr = pC->uc.pCursor; res = 0; assert( pCrsr!=0 ); - pC->seekResult = pOp->p3; #ifdef SQLITE_DEBUG - pC->seekOp = OP_Last; + pC->seekOp = pOp->opcode; #endif - if( pOp->p3==0 || !sqlite3BtreeCursorIsValidNN(pCrsr) ){ - rc = sqlite3BtreeLast(pCrsr, &res); - pC->nullRow = (u8)res; - pC->deferredMoveto = 0; - pC->cacheStatus = CACHE_STALE; - if( rc ) goto abort_due_to_error; - if( pOp->p2>0 ){ - VdbeBranchTaken(res!=0,2); - if( res ) goto jump_to_p2; + if( pOp->opcode==OP_SeekEnd ){ + assert( pOp->p2==0 ); + pC->seekResult = -1; + if( sqlite3BtreeCursorIsValidNN(pCrsr) ){ + break; } - }else{ - assert( pOp->p2==0 ); } + rc = sqlite3BtreeLast(pCrsr, &res); + pC->nullRow = (u8)res; + pC->deferredMoveto = 0; + pC->cacheStatus = CACHE_STALE; + if( rc ) goto abort_due_to_error; + if( pOp->p2>0 ){ + VdbeBranchTaken(res!=0,2); + if( res ) goto jump_to_p2; + } break; } @@ -83861,7 +88084,7 @@ p->aCounter[SQLITE_STMTSTATUS_SORT]++; /* Fall through into OP_Rewind */ } -/* Opcode: Rewind P1 P2 * * * +/* Opcode: Rewind P1 P2 * * P5 ** ** The next use of the Rowid or Column or Next instruction for P1 ** will refer to the first entry in the database table or index. @@ -83869,6 +88092,10 @@ ** If the table or index is not empty, fall through to the following ** instruction. ** +** If P5 is non-zero and the table is not empty, then the "skip-next" +** flag is set on the cursor so that the next OP_Next instruction +** executed on it is a no-op. +** ** This opcode leaves the cursor configured to move in forward order, ** from the beginning toward the end. In other words, the cursor is ** configured to use Next, not Prev. @@ -83893,6 +88120,9 @@ pCrsr = pC->uc.pCursor; assert( pCrsr ); rc = sqlite3BtreeFirst(pCrsr, &res); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pOp->p5 ) sqlite3BtreeSkipNext(pCrsr); +#endif pC->deferredMoveto = 0; pC->cacheStatus = CACHE_STALE; } @@ -83929,13 +88159,8 @@ ** If P5 is positive and the jump is taken, then event counter ** number P5-1 in the prepared statement is incremented. ** -** See also: Prev, NextIfOpen +** See also: Prev */ -/* Opcode: NextIfOpen P1 P2 P3 P4 P5 -** -** This opcode works just like Next except that if cursor P1 is not -** open it behaves a no-op. -*/ /* Opcode: Prev P1 P2 P3 P4 P5 ** ** Back up cursor P1 so that it points to the previous key/data pair in its @@ -83962,11 +88187,6 @@ ** If P5 is positive and the jump is taken, then event counter ** number P5-1 in the prepared statement is incremented. */ -/* Opcode: PrevIfOpen P1 P2 P3 P4 P5 -** -** This opcode works just like Prev except that if cursor P1 is not -** open it behaves a no-op. -*/ /* Opcode: SorterNext P1 P2 * * P5 ** ** This opcode works just like OP_Next except that P1 must be a @@ -83981,10 +88201,6 @@ assert( isSorter(pC) ); rc = sqlite3VdbeSorterNext(db, pC); goto next_tail; -case OP_PrevIfOpen: /* jump */ -case OP_NextIfOpen: /* jump */ - if( p->apCsr[pOp->p1]==0 ) break; - /* Fall through */ case OP_Prev: /* jump */ case OP_Next: /* jump */ assert( pOp->p1>=0 && pOp->p1nCursor ); @@ -83995,17 +88211,17 @@ assert( pC->eCurType==CURTYPE_BTREE ); assert( pOp->opcode!=OP_Next || pOp->p4.xAdvance==sqlite3BtreeNext ); assert( pOp->opcode!=OP_Prev || pOp->p4.xAdvance==sqlite3BtreePrevious ); - assert( pOp->opcode!=OP_NextIfOpen || pOp->p4.xAdvance==sqlite3BtreeNext ); - assert( pOp->opcode!=OP_PrevIfOpen || pOp->p4.xAdvance==sqlite3BtreePrevious); - /* The Next opcode is only used after SeekGT, SeekGE, and Rewind. + /* The Next opcode is only used after SeekGT, SeekGE, Rewind, and Found. ** The Prev opcode is only used after SeekLT, SeekLE, and Last. */ - assert( pOp->opcode!=OP_Next || pOp->opcode!=OP_NextIfOpen + assert( pOp->opcode!=OP_Next || pC->seekOp==OP_SeekGT || pC->seekOp==OP_SeekGE - || pC->seekOp==OP_Rewind || pC->seekOp==OP_Found); - assert( pOp->opcode!=OP_Prev || pOp->opcode!=OP_PrevIfOpen + || pC->seekOp==OP_Rewind || pC->seekOp==OP_Found + || pC->seekOp==OP_NullRow); + assert( pOp->opcode!=OP_Prev || pC->seekOp==OP_SeekLT || pC->seekOp==OP_SeekLE - || pC->seekOp==OP_Last ); + || pC->seekOp==OP_Last + || pC->seekOp==OP_NullRow); rc = pOp->p4.xAdvance(pC->uc.pCursor, pOp->p3); next_tail: @@ -84067,6 +88283,7 @@ assert( pOp->p1>=0 && pOp->p1nCursor ); pC = p->apCsr[pOp->p1]; + sqlite3VdbeIncrWriteCounter(p, pC); assert( pC!=0 ); assert( isSorter(pC)==(pOp->opcode==OP_SorterInsert) ); pIn2 = &aMem[pOp->p2]; @@ -84113,6 +88330,7 @@ pC = p->apCsr[pOp->p1]; assert( pC!=0 ); assert( pC->eCurType==CURTYPE_BTREE ); + sqlite3VdbeIncrWriteCounter(p, pC); pCrsr = pC->uc.pCursor; assert( pCrsr!=0 ); assert( pOp->p5==0 ); @@ -84286,7 +88504,13 @@ } r.aMem = &aMem[pOp->p3]; #ifdef SQLITE_DEBUG - { int i; for(i=0; ip3+i, &aMem[pOp->p3+i]); + } + } #endif res = 0; /* Not needed. Only used to silence a warning. */ rc = sqlite3VdbeIdxKeyCompare(db, pC, &r, &res); @@ -84335,6 +88559,7 @@ int iMoved; int iDb; + sqlite3VdbeIncrWriteCounter(p, 0); assert( p->readOnly==0 ); assert( pOp->p1>1 ); pOut = out2Prerelease(p, pOp); @@ -84384,6 +88609,7 @@ case OP_Clear: { int nChange; + sqlite3VdbeIncrWriteCounter(p, 0); nChange = 0; assert( p->readOnly==0 ); assert( DbMaskTest(p->btreeMask, pOp->p2) ); @@ -84427,50 +88653,29 @@ break; } -/* Opcode: CreateTable P1 P2 * * * -** Synopsis: r[P2]=root iDb=P1 +/* Opcode: CreateBtree P1 P2 P3 * * +** Synopsis: r[P2]=root iDb=P1 flags=P3 ** -** Allocate a new table in the main database file if P1==0 or in the -** auxiliary database file if P1==1 or in an attached database if -** P1>1. Write the root page number of the new table into -** register P2 -** -** The difference between a table and an index is this: A table must -** have a 4-byte integer key and can have arbitrary data. An index -** has an arbitrary key but no data. -** -** See also: CreateIndex +** Allocate a new b-tree in the main database file if P1==0 or in the +** TEMP database file if P1==1 or in an attached database if +** P1>1. The P3 argument must be 1 (BTREE_INTKEY) for a rowid table +** it must be 2 (BTREE_BLOBKEY) for an index or WITHOUT ROWID table. +** The root page number of the new b-tree is stored in register P2. */ -/* Opcode: CreateIndex P1 P2 * * * -** Synopsis: r[P2]=root iDb=P1 -** -** Allocate a new index in the main database file if P1==0 or in the -** auxiliary database file if P1==1 or in an attached database if -** P1>1. Write the root page number of the new table into -** register P2. -** -** See documentation on OP_CreateTable for additional information. -*/ -case OP_CreateIndex: /* out2 */ -case OP_CreateTable: { /* out2 */ +case OP_CreateBtree: { /* out2 */ int pgno; - int flags; Db *pDb; + sqlite3VdbeIncrWriteCounter(p, 0); pOut = out2Prerelease(p, pOp); pgno = 0; + assert( pOp->p3==BTREE_INTKEY || pOp->p3==BTREE_BLOBKEY ); assert( pOp->p1>=0 && pOp->p1nDb ); assert( DbMaskTest(p->btreeMask, pOp->p1) ); assert( p->readOnly==0 ); pDb = &db->aDb[pOp->p1]; assert( pDb->pBt!=0 ); - if( pOp->opcode==OP_CreateTable ){ - /* flags = BTREE_INTKEY; */ - flags = BTREE_INTKEY; - }else{ - flags = BTREE_BLOBKEY; - } - rc = sqlite3BtreeCreateTable(pDb->pBt, &pgno, flags); + rc = sqlite3BtreeCreateTable(pDb->pBt, &pgno, pOp->p3); if( rc ) goto abort_due_to_error; pOut->u.i = pgno; break; @@ -84481,6 +88686,7 @@ ** Run the SQL statement or statements specified in the P4 string. */ case OP_SqlExec: { + sqlite3VdbeIncrWriteCounter(p, 0); db->nSqlExec++; rc = sqlite3_exec(db, pOp->p4.z, 0, 0, 0); db->nSqlExec--; @@ -84491,7 +88697,8 @@ /* Opcode: ParseSchema P1 * * P4 * ** ** Read and parse all entries from the SQLITE_MASTER table of database P1 -** that match the WHERE clause P4. +** that match the WHERE clause P4. If P4 is a NULL pointer, then the +** entire schema for P1 is reparsed. ** ** This opcode invokes the parser to create a new virtual machine, ** then runs the new virtual machine. It is thus a re-entrant opcode. @@ -84515,11 +88722,22 @@ iDb = pOp->p1; assert( iDb>=0 && iDbnDb ); assert( DbHasProperty(db, iDb, DB_SchemaLoaded) ); - /* Used to be a conditional */ { + +#ifndef SQLITE_OMIT_ALTERTABLE + if( pOp->p4.z==0 ){ + sqlite3SchemaClear(db->aDb[iDb].pSchema); + db->mDbFlags &= ~DBFLAG_SchemaKnownOk; + rc = sqlite3InitOne(db, iDb, &p->zErrMsg, INITFLAG_AlterTable); + db->mDbFlags |= DBFLAG_SchemaChange; + p->expired = 0; + }else +#endif + { zMaster = MASTER_NAME; initData.db = db; - initData.iDb = pOp->p1; + initData.iDb = iDb; initData.pzErrMsg = &p->zErrMsg; + initData.mInitFlags = 0; zSql = sqlite3MPrintf(db, "SELECT name, rootpage, sql FROM '%q'.%s WHERE %s ORDER BY rowid", db->aDb[iDb].zDbSName, zMaster, pOp->p4.z); @@ -84570,6 +88788,7 @@ ** schema consistent with what is on disk. */ case OP_DropTable: { + sqlite3VdbeIncrWriteCounter(p, 0); sqlite3UnlinkAndDeleteTable(db, pOp->p1, pOp->p4.z); break; } @@ -84583,6 +88802,7 @@ ** schema consistent with what is on disk. */ case OP_DropIndex: { + sqlite3VdbeIncrWriteCounter(p, 0); sqlite3UnlinkAndDeleteIndex(db, pOp->p1, pOp->p4.z); break; } @@ -84596,6 +88816,7 @@ ** schema consistent with what is on disk. */ case OP_DropTrigger: { + sqlite3VdbeIncrWriteCounter(p, 0); sqlite3UnlinkAndDeleteTrigger(db, pOp->p1, pOp->p4.z); break; } @@ -84632,7 +88853,7 @@ nRoot = pOp->p2; aRoot = pOp->p4.ai; assert( nRoot>0 ); - assert( aRoot[nRoot]==0 ); + assert( aRoot[0]==nRoot ); assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) ); pnErr = &aMem[pOp->p3]; assert( (pnErr->flags & MEM_Int)!=0 ); @@ -84640,7 +88861,7 @@ pIn1 = &aMem[pOp->p1]; assert( pOp->p5nDb ); assert( DbMaskTest(p->btreeMask, pOp->p5) ); - z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, aRoot, nRoot, + z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, &aRoot[1], nRoot, (int)pnErr->u.i+1, &nErr); sqlite3VdbeMemSetNull(pIn1); if( nErr==0 ){ @@ -84669,11 +88890,11 @@ pIn1 = &aMem[pOp->p1]; pIn2 = &aMem[pOp->p2]; assert( (pIn2->flags & MEM_Int)!=0 ); - if( (pIn1->flags & MEM_RowSet)==0 ){ - sqlite3VdbeMemSetRowSet(pIn1); - if( (pIn1->flags & MEM_RowSet)==0 ) goto no_mem; + if( (pIn1->flags & MEM_Blob)==0 ){ + if( sqlite3VdbeMemSetRowSet(pIn1) ) goto no_mem; } - sqlite3RowSetInsert(pIn1->u.pRowSet, pIn2->u.i); + assert( sqlite3VdbeMemIsRowSet(pIn1) ); + sqlite3RowSetInsert((RowSet*)pIn1->z, pIn2->u.i); break; } @@ -84689,8 +88910,9 @@ i64 val; pIn1 = &aMem[pOp->p1]; - if( (pIn1->flags & MEM_RowSet)==0 - || sqlite3RowSetNext(pIn1->u.pRowSet, &val)==0 + assert( (pIn1->flags & MEM_Blob)==0 || sqlite3VdbeMemIsRowSet(pIn1) ); + if( (pIn1->flags & MEM_Blob)==0 + || sqlite3RowSetNext((RowSet*)pIn1->z, &val)==0 ){ /* The boolean index is empty */ sqlite3VdbeMemSetNull(pIn1); @@ -84739,20 +88961,19 @@ /* If there is anything other than a rowset object in memory cell P1, ** delete it now and initialize P1 with an empty rowset */ - if( (pIn1->flags & MEM_RowSet)==0 ){ - sqlite3VdbeMemSetRowSet(pIn1); - if( (pIn1->flags & MEM_RowSet)==0 ) goto no_mem; + if( (pIn1->flags & MEM_Blob)==0 ){ + if( sqlite3VdbeMemSetRowSet(pIn1) ) goto no_mem; } - + assert( sqlite3VdbeMemIsRowSet(pIn1) ); assert( pOp->p4type==P4_INT32 ); assert( iSet==-1 || iSet>=0 ); if( iSet ){ - exists = sqlite3RowSetTest(pIn1->u.pRowSet, iSet, pIn3->u.i); + exists = sqlite3RowSetTest((RowSet*)pIn1->z, iSet, pIn3->u.i); VdbeBranchTaken(exists!=0,2); if( exists ) goto jump_to_p2; } if( iSet>=0 ){ - sqlite3RowSetInsert(pIn1->u.pRowSet, pIn3->u.i); + sqlite3RowSetInsert((RowSet*)pIn1->z, pIn3->u.i); } break; } @@ -84816,7 +89037,7 @@ ** of the current program, and the memory required at runtime to execute ** the trigger program. If this trigger has been fired before, then pRt ** is already allocated. Otherwise, it must be initialized. */ - if( (pRt->flags&MEM_Frame)==0 ){ + if( (pRt->flags&MEM_Blob)==0 ){ /* SubProgram.nMem is set to the number of memory cells used by the ** program stored in SubProgram.aOp. As well as these, one memory ** cell is required for each cursor used by the program. Set local @@ -84834,8 +89055,10 @@ goto no_mem; } sqlite3VdbeMemRelease(pRt); - pRt->flags = MEM_Frame; - pRt->u.pFrame = pFrame; + pRt->flags = MEM_Blob|MEM_Dyn; + pRt->z = (char*)pFrame; + pRt->n = nByte; + pRt->xDel = sqlite3VdbeFrameMemDel; pFrame->v = p; pFrame->nChildMem = nMem; @@ -84851,6 +89074,9 @@ #ifdef SQLITE_ENABLE_STMT_SCANSTATUS pFrame->anExec = p->anExec; #endif +#ifdef SQLITE_DEBUG + pFrame->iFrameMagic = SQLITE_FRAME_MAGIC; +#endif pEnd = &VdbeFrameMem(pFrame)[pFrame->nChildMem]; for(pMem=VdbeFrameMem(pFrame); pMem!=pEnd; pMem++){ @@ -84858,7 +89084,8 @@ pMem->db = db; } }else{ - pFrame = pRt->u.pFrame; + pFrame = (VdbeFrame*)pRt->z; + assert( pRt->xDel==sqlite3VdbeFrameMemDel ); assert( pProgram->nMem+pProgram->nCsr==pFrame->nChildMem || (pProgram->nCsr==0 && pProgram->nMem+1==pFrame->nChildMem) ); assert( pProgram->nCsr==pFrame->nChildCsr ); @@ -85087,24 +89314,35 @@ } -/* Opcode: AggStep0 * P2 P3 P4 P5 +/* Opcode: AggStep * P2 P3 P4 P5 ** Synopsis: accum=r[P3] step(r[P2@P5]) ** -** Execute the step function for an aggregate. The -** function has P5 arguments. P4 is a pointer to the FuncDef -** structure that specifies the function. Register P3 is the +** Execute the xStep function for an aggregate. +** The function has P5 arguments. P4 is a pointer to the +** FuncDef structure that specifies the function. Register P3 is the ** accumulator. ** ** The P5 arguments are taken from register P2 and its ** successors. */ -/* Opcode: AggStep * P2 P3 P4 P5 +/* Opcode: AggInverse * P2 P3 P4 P5 +** Synopsis: accum=r[P3] inverse(r[P2@P5]) +** +** Execute the xInverse function for an aggregate. +** The function has P5 arguments. P4 is a pointer to the +** FuncDef structure that specifies the function. Register P3 is the +** accumulator. +** +** The P5 arguments are taken from register P2 and its +** successors. +*/ +/* Opcode: AggStep1 P1 P2 P3 P4 P5 ** Synopsis: accum=r[P3] step(r[P2@P5]) ** -** Execute the step function for an aggregate. The -** function has P5 arguments. P4 is a pointer to an sqlite3_context -** object that is used to run the function. Register P3 is -** as the accumulator. +** Execute the xStep (if P1==0) or xInverse (if P1!=0) function for an +** aggregate. The function has P5 arguments. P4 is a pointer to the +** FuncDef structure that specifies the function. Register P3 is the +** accumulator. ** ** The P5 arguments are taken from register P2 and its ** successors. @@ -85115,7 +89353,8 @@ ** sqlite3_context only happens once, instead of on each call to the ** step function. */ -case OP_AggStep0: { +case OP_AggInverse: +case OP_AggStep: { int n; sqlite3_context *pCtx; @@ -85124,28 +89363,47 @@ assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) ); assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem+1 - p->nCursor)+1) ); assert( pOp->p3p2 || pOp->p3>=pOp->p2+n ); - pCtx = sqlite3DbMallocRawNN(db, sizeof(*pCtx) + (n-1)*sizeof(sqlite3_value*)); + pCtx = sqlite3DbMallocRawNN(db, n*sizeof(sqlite3_value*) + + (sizeof(pCtx[0]) + sizeof(Mem) - sizeof(sqlite3_value*))); if( pCtx==0 ) goto no_mem; pCtx->pMem = 0; + pCtx->pOut = (Mem*)&(pCtx->argv[n]); + sqlite3VdbeMemInit(pCtx->pOut, db, MEM_Null); pCtx->pFunc = pOp->p4.pFunc; pCtx->iOp = (int)(pOp - aOp); pCtx->pVdbe = p; + pCtx->skipFlag = 0; + pCtx->isError = 0; pCtx->argc = n; pOp->p4type = P4_FUNCCTX; pOp->p4.pCtx = pCtx; - pOp->opcode = OP_AggStep; + + /* OP_AggInverse must have P1==1 and OP_AggStep must have P1==0 */ + assert( pOp->p1==(pOp->opcode==OP_AggInverse) ); + + pOp->opcode = OP_AggStep1; /* Fall through into OP_AggStep */ } -case OP_AggStep: { +case OP_AggStep1: { int i; sqlite3_context *pCtx; Mem *pMem; - Mem t; assert( pOp->p4type==P4_FUNCCTX ); pCtx = pOp->p4.pCtx; pMem = &aMem[pOp->p3]; +#ifdef SQLITE_DEBUG + if( pOp->p1 ){ + /* This is an OP_AggInverse call. Verify that xStep has always + ** been called at least once prior to any xInverse call. */ + assert( pMem->uTemp==0x1122e0e3 ); + }else{ + /* This is an OP_AggStep call. Mark it as such. */ + pMem->uTemp = 0x1122e0e3; + } +#endif + /* If this function is inside of a trigger, the register array in aMem[] ** might change from one evaluation to the next. The next block of code ** checks to see if the register array has changed, and if so it @@ -85163,26 +89421,34 @@ #endif pMem->n++; - sqlite3VdbeMemInit(&t, db, MEM_Null); - pCtx->pOut = &t; - pCtx->fErrorOrAux = 0; - pCtx->skipFlag = 0; + assert( pCtx->pOut->flags==MEM_Null ); + assert( pCtx->isError==0 ); + assert( pCtx->skipFlag==0 ); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pOp->p1 ){ + (pCtx->pFunc->xInverse)(pCtx,pCtx->argc,pCtx->argv); + }else +#endif (pCtx->pFunc->xSFunc)(pCtx,pCtx->argc,pCtx->argv); /* IMP: R-24505-23230 */ - if( pCtx->fErrorOrAux ){ - if( pCtx->isError ){ - sqlite3VdbeError(p, "%s", sqlite3_value_text(&t)); + + if( pCtx->isError ){ + if( pCtx->isError>0 ){ + sqlite3VdbeError(p, "%s", sqlite3_value_text(pCtx->pOut)); rc = pCtx->isError; } - sqlite3VdbeMemRelease(&t); + if( pCtx->skipFlag ){ + assert( pOp[-1].opcode==OP_CollSeq ); + i = pOp[-1].p1; + if( i ) sqlite3VdbeMemSetInt64(&aMem[i], 1); + pCtx->skipFlag = 0; + } + sqlite3VdbeMemRelease(pCtx->pOut); + pCtx->pOut->flags = MEM_Null; + pCtx->isError = 0; if( rc ) goto abort_due_to_error; - }else{ - assert( t.flags==MEM_Null ); } - if( pCtx->skipFlag ){ - assert( pOp[-1].opcode==OP_CollSeq ); - i = pOp[-1].p1; - if( i ) sqlite3VdbeMemSetInt64(&aMem[i], 1); - } + assert( pCtx->pOut->flags==MEM_Null ); + assert( pCtx->skipFlag==0 ); break; } @@ -85189,22 +89455,46 @@ /* Opcode: AggFinal P1 P2 * P4 * ** Synopsis: accum=r[P1] N=P2 ** -** Execute the finalizer function for an aggregate. P1 is -** the memory location that is the accumulator for the aggregate. +** P1 is the memory location that is the accumulator for an aggregate +** or window function. Execute the finalizer function +** for an aggregate and store the result in P1. ** ** P2 is the number of arguments that the step function takes and ** P4 is a pointer to the FuncDef for this function. The P2 ** argument is not used by this opcode. It is only there to disambiguate ** functions that can take varying numbers of arguments. The -** P4 argument is only needed for the degenerate case where +** P4 argument is only needed for the case where ** the step function was not previously called. */ +/* Opcode: AggValue * P2 P3 P4 * +** Synopsis: r[P3]=value N=P2 +** +** Invoke the xValue() function and store the result in register P3. +** +** P2 is the number of arguments that the step function takes and +** P4 is a pointer to the FuncDef for this function. The P2 +** argument is not used by this opcode. It is only there to disambiguate +** functions that can take varying numbers of arguments. The +** P4 argument is only needed for the case where +** the step function was not previously called. +*/ +case OP_AggValue: case OP_AggFinal: { Mem *pMem; assert( pOp->p1>0 && pOp->p1<=(p->nMem+1 - p->nCursor) ); + assert( pOp->p3==0 || pOp->opcode==OP_AggValue ); pMem = &aMem[pOp->p1]; assert( (pMem->flags & ~(MEM_Null|MEM_Agg))==0 ); - rc = sqlite3VdbeMemFinalize(pMem, pOp->p4.pFunc); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pOp->p3 ){ + rc = sqlite3VdbeMemAggValue(pMem, &aMem[pOp->p3], pOp->p4.pFunc); + pMem = &aMem[pOp->p3]; + }else +#endif + { + rc = sqlite3VdbeMemFinalize(pMem, pOp->p4.pFunc); + } + if( rc ){ sqlite3VdbeError(p, "%s", sqlite3_value_text(pMem)); goto abort_due_to_error; @@ -85399,7 +89689,7 @@ } #endif -/* Opcode: Expire P1 * * * * +/* Opcode: Expire P1 P2 * * * ** ** Cause precompiled statements to expire. When an expired statement ** is executed using sqlite3_step() it will either automatically @@ -85408,12 +89698,19 @@ ** ** If P1 is 0, then all SQL statements become expired. If P1 is non-zero, ** then only the currently executing statement is expired. +** +** If P2 is 0, then SQL statements are expired immediately. If P2 is 1, +** then running SQL statements are allowed to continue to run to completion. +** The P2==1 case occurs when a CREATE INDEX or similar schema change happens +** that might help the statement run faster but which does not affect the +** correctness of operation. */ case OP_Expire: { + assert( pOp->p2==0 || pOp->p2==1 ); if( !pOp->p1 ){ - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, pOp->p2); }else{ - p->expired = 1; + p->expired = pOp->p2+1; } break; } @@ -85627,12 +89924,19 @@ #endif /* SQLITE_OMIT_VIRTUALTABLE */ #ifndef SQLITE_OMIT_VIRTUALTABLE -/* Opcode: VColumn P1 P2 P3 * * +/* Opcode: VColumn P1 P2 P3 * P5 ** Synopsis: r[P3]=vcolumn(P2) ** -** Store the value of the P2-th column of -** the row of the virtual-table that the -** P1 cursor is pointing to into register P3. +** Store in register P3 the value of the P2-th column of +** the current row of the virtual-table of cursor P1. +** +** If the VColumn opcode is being used to fetch the value of +** an unchanging column during an UPDATE operation, then the P5 +** value is OPFLAG_NOCHNG. This will cause the sqlite3_vtab_nochange() +** function to return true inside the xColumn method of the virtual +** table implementation. The P5 column might also contain other +** bits (OPFLAG_LENGTHARG or OPFLAG_TYPEOFARG) but those bits are +** unused by OP_VColumn. */ case OP_VColumn: { sqlite3_vtab *pVtab; @@ -85654,10 +89958,18 @@ assert( pModule->xColumn ); memset(&sContext, 0, sizeof(sContext)); sContext.pOut = pDest; - MemSetTypeFlag(pDest, MEM_Null); + testcase( (pOp->p5 & OPFLAG_NOCHNG)==0 && pOp->p5!=0 ); + if( pOp->p5 & OPFLAG_NOCHNG ){ + sqlite3VdbeMemSetNull(pDest); + pDest->flags = MEM_Null|MEM_Zero; + pDest->u.nZero = 0; + }else{ + MemSetTypeFlag(pDest, MEM_Null); + } rc = pModule->xColumn(pCur->uc.pVCur, &sContext, pOp->p2); sqlite3VtabImportErrmsg(p, pVtab); - if( sContext.isError ){ + if( sContext.isError>0 ){ + sqlite3VdbeError(p, "%s", sqlite3_value_text(pDest)); rc = sContext.isError; } sqlite3VdbeChangeEncoding(pDest, encoding); @@ -85724,7 +90036,10 @@ case OP_VRename: { sqlite3_vtab *pVtab; Mem *pName; - + int isLegacy; + + isLegacy = (db->flags & SQLITE_LegacyAlter); + db->flags |= SQLITE_LegacyAlter; pVtab = pOp->p4.pVtab->pVtab; pName = &aMem[pOp->p1]; assert( pVtab->pModule->xRename ); @@ -85738,6 +90053,7 @@ rc = sqlite3VdbeChangeEncoding(pName, SQLITE_UTF8); if( rc ) goto abort_due_to_error; rc = pVtab->pModule->xRename(pVtab, pName->z); + if( isLegacy==0 ) db->flags &= ~SQLITE_LegacyAlter; sqlite3VtabImportErrmsg(p, pVtab); p->expired = 0; if( rc ) goto abort_due_to_error; @@ -85786,6 +90102,8 @@ || pOp->p5==OE_Abort || pOp->p5==OE_Ignore || pOp->p5==OE_Replace ); assert( p->readOnly==0 ); + if( db->mallocFailed ) goto no_mem; + sqlite3VdbeIncrWriteCounter(p, 0); pVtab = pOp->p4.pVtab->pVtab; if( pVtab==0 || NEVER(pVtab->pModule==0) ){ rc = SQLITE_LOCKED; @@ -85906,8 +90224,8 @@ ** ** See also: Function0, AggStep, AggFinal */ -case OP_PureFunc0: -case OP_Function0: { +case OP_PureFunc0: /* group */ +case OP_Function0: { /* group */ int n; sqlite3_context *pCtx; @@ -85922,6 +90240,7 @@ pCtx->pFunc = pOp->p4.pFunc; pCtx->iOp = (int)(pOp - aOp); pCtx->pVdbe = p; + pCtx->isError = 0; pCtx->argc = n; pOp->p4type = P4_FUNCCTX; pOp->p4.pCtx = pCtx; @@ -85930,8 +90249,8 @@ pOp->opcode += 2; /* Fall through into OP_Function */ } -case OP_PureFunc: -case OP_Function: { +case OP_PureFunc: /* group */ +case OP_Function: { /* group */ int i; sqlite3_context *pCtx; @@ -85956,16 +90275,17 @@ } #endif MemSetTypeFlag(pOut, MEM_Null); - pCtx->fErrorOrAux = 0; + assert( pCtx->isError==0 ); (*pCtx->pFunc->xSFunc)(pCtx, pCtx->argc, pCtx->argv);/* IMP: R-24505-23230 */ /* If the function returned an error, throw an exception */ - if( pCtx->fErrorOrAux ){ - if( pCtx->isError ){ + if( pCtx->isError ){ + if( pCtx->isError>0 ){ sqlite3VdbeError(p, "%s", sqlite3_value_text(pOut)); rc = pCtx->isError; } sqlite3VdbeDeleteAuxData(db, &p->pAuxData, pCtx->iOp, pOp->p1); + pCtx->isError = 0; if( rc ) goto abort_due_to_error; } @@ -85980,8 +90300,14 @@ break; } - -/* Opcode: Init P1 P2 * P4 * +/* Opcode: Trace P1 P2 * P4 * +** +** Write P4 on the statement trace output if statement tracing is +** enabled. +** +** Operand P1 must be 0x7fffffff and P2 must positive. +*/ +/* Opcode: Init P1 P2 P3 P4 * ** Synopsis: Start at P2 ** ** Programs contain a single instance of this opcode as the very first @@ -85995,10 +90321,16 @@ ** ** Increment the value of P1 so that OP_Once opcodes will jump the ** first time they are evaluated for this run. +** +** If P3 is not zero, then it is an address to jump to if an SQLITE_CORRUPT +** error is encountered. */ +case OP_Trace: case OP_Init: { /* jump */ + int i; +#ifndef SQLITE_OMIT_TRACE char *zTrace; - int i; +#endif /* If the P4 argument is not NULL, then it must be an SQL comment string. ** The "--" string is broken up to prevent false-positives with srcck1.c. @@ -86010,8 +90342,10 @@ ** sqlite3_expanded_sql(P) otherwise. */ assert( pOp->p4.z==0 || strncmp(pOp->p4.z, "-" "- ", 3)==0 ); - assert( pOp==p->aOp ); /* Always instruction 0 */ + /* OP_Init is always instruction 0 */ + assert( pOp==p->aOp || pOp->opcode==OP_Trace ); + #ifndef SQLITE_OMIT_TRACE if( (db->mTrace & (SQLITE_TRACE_STMT|SQLITE_TRACE_LEGACY))!=0 && !p->doingRerun @@ -86053,6 +90387,7 @@ #endif /* SQLITE_OMIT_TRACE */ assert( pOp->p2>0 ); if( pOp->p1>=sqlite3GlobalConfig.iOnceResetThreshold ){ + if( pOp->opcode==OP_Trace ) break; for(i=1; inOp; i++){ if( p->aOp[i].opcode==OP_Once ) p->aOp[i].p1 = 0; } @@ -86086,6 +90421,22 @@ } #endif /* SQLITE_ENABLE_CURSOR_HINTS */ +#ifdef SQLITE_DEBUG +/* Opcode: Abortable * * * * * +** +** Verify that an Abort can happen. Assert if an Abort at this point +** might cause database corruption. This opcode only appears in debugging +** builds. +** +** An Abort is safe if either there have been no writes, or if there is +** an active statement journal. +*/ +case OP_Abortable: { + sqlite3VdbeAssertAbortable(p); + break; +} +#endif + /* Opcode: Noop * * * * * ** ** Do nothing. This instruction is often useful as a jump @@ -86097,8 +90448,9 @@ ** This opcode records information from the optimizer. It is the ** the same as a no-op. This opcodesnever appears in a real VM program. */ -default: { /* This is really OP_Noop and OP_Explain */ +default: { /* This is really OP_Noop, OP_Explain */ assert( pOp->opcode==OP_Noop || pOp->opcode==OP_Explain ); + break; } @@ -86112,7 +90464,7 @@ #ifdef VDBE_PROFILE { - u64 endTime = sqlite3Hwtime(); + u64 endTime = sqlite3NProfileCnt ? sqlite3NProfileCnt : sqlite3Hwtime(); if( endTime>start ) pOrigOp->cycles += endTime - start; pOrigOp->cnt++; } @@ -86269,11 +90621,12 @@ v->aMem[1].u.i = iRow; /* If the statement has been run before (and is paused at the OP_ResultRow) - ** then back it up to the point where it does the OP_SeekRowid. This could + ** then back it up to the point where it does the OP_NotExists. This could ** have been down with an extra OP_Goto, but simply setting the program ** counter is faster. */ - if( v->pc>3 ){ - v->pc = 3; + if( v->pc>4 ){ + v->pc = 4; + assert( v->aOp[v->pc].opcode==OP_NotExists ); rc = sqlite3VdbeExec(v); }else{ rc = sqlite3_step(p->pStmt); @@ -86335,8 +90688,8 @@ int rc = SQLITE_OK; char *zErr = 0; Table *pTab; - Parse *pParse = 0; Incrblob *pBlob = 0; + Parse sParse; #ifdef SQLITE_ENABLE_API_ARMOR if( ppBlob==0 ){ @@ -86354,37 +90707,34 @@ sqlite3_mutex_enter(db->mutex); pBlob = (Incrblob *)sqlite3DbMallocZero(db, sizeof(Incrblob)); - if( !pBlob ) goto blob_open_out; - pParse = sqlite3StackAllocRaw(db, sizeof(*pParse)); - if( !pParse ) goto blob_open_out; - do { - memset(pParse, 0, sizeof(Parse)); - pParse->db = db; + memset(&sParse, 0, sizeof(Parse)); + if( !pBlob ) goto blob_open_out; + sParse.db = db; sqlite3DbFree(db, zErr); zErr = 0; sqlite3BtreeEnterAll(db); - pTab = sqlite3LocateTable(pParse, 0, zTable, zDb); + pTab = sqlite3LocateTable(&sParse, 0, zTable, zDb); if( pTab && IsVirtual(pTab) ){ pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open virtual table: %s", zTable); + sqlite3ErrorMsg(&sParse, "cannot open virtual table: %s", zTable); } if( pTab && !HasRowid(pTab) ){ pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open table without rowid: %s", zTable); + sqlite3ErrorMsg(&sParse, "cannot open table without rowid: %s", zTable); } #ifndef SQLITE_OMIT_VIEW if( pTab && pTab->pSelect ){ pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open view: %s", zTable); + sqlite3ErrorMsg(&sParse, "cannot open view: %s", zTable); } #endif if( !pTab ){ - if( pParse->zErrMsg ){ + if( sParse.zErrMsg ){ sqlite3DbFree(db, zErr); - zErr = pParse->zErrMsg; - pParse->zErrMsg = 0; + zErr = sParse.zErrMsg; + sParse.zErrMsg = 0; } rc = SQLITE_ERROR; sqlite3BtreeLeaveAll(db); @@ -86448,7 +90798,7 @@ } } - pBlob->pStmt = (sqlite3_stmt *)sqlite3VdbeCreate(pParse); + pBlob->pStmt = (sqlite3_stmt *)sqlite3VdbeCreate(&sParse); assert( pBlob->pStmt || db->mallocFailed ); if( pBlob->pStmt ){ @@ -86484,7 +90834,8 @@ sqlite3VdbeAddOp4Int(v, OP_Transaction, iDb, wrFlag, pTab->pSchema->schema_cookie, pTab->pSchema->iGeneration); - sqlite3VdbeChangeP5(v, 1); + sqlite3VdbeChangeP5(v, 1); + assert( sqlite3VdbeCurrentAddr(v)==2 || db->mallocFailed ); aOp = sqlite3VdbeAddOpList(v, ArraySize(openBlob), openBlob, iLn); /* Make sure a mutex is held on the table to be accessed */ @@ -86499,7 +90850,7 @@ aOp[0].p1 = iDb; aOp[0].p2 = pTab->tnum; aOp[0].p3 = wrFlag; - sqlite3VdbeChangeP4(v, 1, pTab->zName, P4_TRANSIENT); + sqlite3VdbeChangeP4(v, 2, pTab->zName, P4_TRANSIENT); } if( db->mallocFailed==0 ){ #endif @@ -86521,10 +90872,10 @@ aOp[1].p4.i = pTab->nCol+1; aOp[3].p2 = pTab->nCol; - pParse->nVar = 0; - pParse->nMem = 1; - pParse->nTab = 1; - sqlite3VdbeMakeReady(v, pParse); + sParse.nVar = 0; + sParse.nMem = 1; + sParse.nTab = 1; + sqlite3VdbeMakeReady(v, &sParse); } } @@ -86546,8 +90897,7 @@ } sqlite3ErrorWithMsg(db, rc, (zErr ? "%s" : 0), zErr); sqlite3DbFree(db, zErr); - sqlite3ParserReset(pParse); - sqlite3StackFree(db, pParse); + sqlite3ParserReset(&sParse); rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); return rc; @@ -87541,7 +91891,7 @@ } if( res==0 ){ - if( pTask->pSorter->pKeyInfo->nField>1 ){ + if( pTask->pSorter->pKeyInfo->nKeyField>1 ){ res = vdbeSorterCompareTail( pTask, pbKey2Cached, pKey1, nKey1, pKey2, nKey2 ); @@ -87610,7 +91960,7 @@ } if( res==0 ){ - if( pTask->pSorter->pKeyInfo->nField>1 ){ + if( pTask->pSorter->pKeyInfo->nKeyField>1 ){ res = vdbeSorterCompareTail( pTask, pbKey2Cached, pKey1, nKey1, pKey2, nKey2 ); @@ -87625,7 +91975,7 @@ /* ** Initialize the temporary index cursor just opened as a sorter cursor. ** -** Usually, the sorter module uses the value of (pCsr->pKeyInfo->nField) +** Usually, the sorter module uses the value of (pCsr->pKeyInfo->nKeyField) ** to determine the number of fields that should be compared from the ** records being sorted. However, if the value passed as argument nField ** is non-zero and the sorter is able to guarantee a stable sort, nField @@ -87678,7 +92028,7 @@ assert( pCsr->pKeyInfo && pCsr->pBtx==0 ); assert( pCsr->eCurType==CURTYPE_SORTER ); - szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nField-1)*sizeof(CollSeq*); + szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nKeyField-1)*sizeof(CollSeq*); sz = sizeof(VdbeSorter) + nWorker * sizeof(SortSubtask); pSorter = (VdbeSorter*)sqlite3DbMallocZero(db, sz + szKeyInfo); @@ -87690,8 +92040,7 @@ memcpy(pKeyInfo, pCsr->pKeyInfo, szKeyInfo); pKeyInfo->db = 0; if( nField && nWorker==0 ){ - pKeyInfo->nXField += (pKeyInfo->nField - nField); - pKeyInfo->nField = nField; + pKeyInfo->nKeyField = nField; } pSorter->pgsz = pgsz = sqlite3BtreeGetPageSize(db->aDb[0].pBt); pSorter->nTask = nWorker + 1; @@ -87719,11 +92068,9 @@ mxCache = MIN(mxCache, SQLITE_MAX_PMASZ); pSorter->mxPmaSize = MAX(pSorter->mnPmaSize, (int)mxCache); - /* EVIDENCE-OF: R-26747-61719 When the application provides any amount of - ** scratch memory using SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary - ** large heap allocations. - */ - if( sqlite3GlobalConfig.pScratch==0 ){ + /* Avoid large memory allocations if the application has requested + ** SQLITE_CONFIG_SMALL_MALLOC. */ + if( sqlite3GlobalConfig.bSmallMalloc==0 ){ assert( pSorter->iMemory==0 ); pSorter->nMemory = pgsz; pSorter->list.aMemory = (u8*)sqlite3Malloc(pgsz); @@ -87731,7 +92078,7 @@ } } - if( (pKeyInfo->nField+pKeyInfo->nXField)<13 + if( pKeyInfo->nAllField<13 && (pKeyInfo->aColl[0]==0 || pKeyInfo->aColl[0]==db->pDfltColl) ){ pSorter->typeMask = SORTER_TYPE_INTEGER | SORTER_TYPE_TEXT; @@ -88046,7 +92393,7 @@ if( pTask->pUnpacked==0 ){ pTask->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pTask->pSorter->pKeyInfo); if( pTask->pUnpacked==0 ) return SQLITE_NOMEM_BKPT; - pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nField; + pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nKeyField; pTask->pUnpacked->errCode = 0; } return SQLITE_OK; @@ -88828,8 +93175,12 @@ ){ int rc = SQLITE_OK; /* Return code */ int i; /* For looping over PmaReader objects */ - int nTree = pMerger->nTree; + int nTree; /* Number of subtrees to merge */ + /* Failure to allocate the merge would have been detected prior to + ** invoking this routine */ + assert( pMerger!=0 ); + /* eMode is always INCRINIT_NORMAL in single-threaded mode */ assert( SQLITE_MAX_WORKER_THREADS>0 || eMode==INCRINIT_NORMAL ); @@ -88837,6 +93188,7 @@ assert( pMerger->pTask==0 ); pMerger->pTask = pTask; + nTree = pMerger->nTree; for(i=0; i0 && eMode==INCRINIT_ROOT ){ /* PmaReaders should be normally initialized in order, as if they are @@ -89570,7 +93922,8 @@ int iChunkOffset; FileChunk *pChunk; -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) if( (iAmt+iOfst)>p->endpoint.iOffset ){ return SQLITE_IOERR_SHORT_READ; } @@ -89689,7 +94042,8 @@ ** atomic-write optimization. In this case the first 28 bytes of the ** journal file may be written as part of committing the transaction. */ assert( iOfst==p->endpoint.iOffset || iOfst==0 ); -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) if( iOfst==0 && p->pFirst ){ assert( p->nChunkSize>iAmt ); memcpy((u8*)p->pFirst->zChunk, zBuf, iAmt); @@ -89858,17 +94212,31 @@ sqlite3JournalOpen(0, 0, pJfd, 0, -1); } -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) /* ** If the argument p points to a MemJournal structure that is not an ** in-memory-only journal file (i.e. is one that was opened with a +ve -** nSpill parameter), and the underlying file has not yet been created, -** create it now. +** nSpill parameter or as SQLITE_OPEN_MAIN_JOURNAL), and the underlying +** file has not yet been created, create it now. */ -SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){ +SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *pJfd){ int rc = SQLITE_OK; - if( p->pMethods==&MemJournalMethods && ((MemJournal*)p)->nSpill>0 ){ - rc = memjrnlCreateFile((MemJournal*)p); + MemJournal *p = (MemJournal*)pJfd; + if( p->pMethod==&MemJournalMethods && ( +#ifdef SQLITE_ENABLE_ATOMIC_WRITE + p->nSpill>0 +#else + /* While this appears to not be possible without ATOMIC_WRITE, the + ** paths are complex, so it seems prudent to leave the test in as + ** a NEVER(), in case our analysis is subtly flawed. */ + NEVER(p->nSpill>0) +#endif +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + || (p->flags & SQLITE_OPEN_MAIN_JOURNAL) +#endif + )){ + rc = memjrnlCreateFile(p); } return rc; } @@ -89935,18 +94303,30 @@ int rc; testcase( ExprHasProperty(pExpr, EP_TokenOnly) ); testcase( ExprHasProperty(pExpr, EP_Reduced) ); - rc = pWalker->xExprCallback(pWalker, pExpr); - if( rc ) return rc & WRC_Abort; - if( !ExprHasProperty(pExpr,(EP_TokenOnly|EP_Leaf)) ){ - if( pExpr->pLeft && walkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort; - assert( pExpr->x.pList==0 || pExpr->pRight==0 ); - if( pExpr->pRight ){ - if( walkExpr(pWalker, pExpr->pRight) ) return WRC_Abort; - }else if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort; - }else if( pExpr->x.pList ){ - if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort; + while(1){ + rc = pWalker->xExprCallback(pWalker, pExpr); + if( rc ) return rc & WRC_Abort; + if( !ExprHasProperty(pExpr,(EP_TokenOnly|EP_Leaf)) ){ + if( pExpr->pLeft && walkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort; + assert( pExpr->x.pList==0 || pExpr->pRight==0 ); + if( pExpr->pRight ){ + pExpr = pExpr->pRight; + continue; + }else if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort; + }else if( pExpr->x.pList ){ + if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort; + } +#ifndef SQLITE_OMIT_WINDOWFUNC + if( ExprHasProperty(pExpr, EP_WinFunc) ){ + Window *pWin = pExpr->y.pWin; + if( sqlite3WalkExprList(pWalker, pWin->pPartition) ) return WRC_Abort; + if( sqlite3WalkExprList(pWalker, pWin->pOrderBy) ) return WRC_Abort; + if( sqlite3WalkExpr(pWalker, pWin->pFilter) ) return WRC_Abort; + } +#endif } + break; } return WRC_Continue; } @@ -89982,7 +94362,6 @@ if( sqlite3WalkExpr(pWalker, p->pHaving) ) return WRC_Abort; if( sqlite3WalkExprList(pWalker, p->pOrderBy) ) return WRC_Abort; if( sqlite3WalkExpr(pWalker, p->pLimit) ) return WRC_Abort; - if( sqlite3WalkExpr(pWalker, p->pOffset) ) return WRC_Abort; return WRC_Continue; } @@ -89999,17 +94378,16 @@ struct SrcList_item *pItem; pSrc = p->pSrc; - if( ALWAYS(pSrc) ){ - for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ - if( pItem->pSelect && sqlite3WalkSelect(pWalker, pItem->pSelect) ){ - return WRC_Abort; - } - if( pItem->fg.isTabFunc - && sqlite3WalkExprList(pWalker, pItem->u1.pFuncArg) - ){ - return WRC_Abort; - } + assert( pSrc!=0 ); + for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ + if( pItem->pSelect && sqlite3WalkSelect(pWalker, pItem->pSelect) ){ + return WRC_Abort; } + if( pItem->fg.isTabFunc + && sqlite3WalkExprList(pWalker, pItem->u1.pFuncArg) + ){ + return WRC_Abort; + } } return WRC_Continue; } @@ -90130,29 +94508,31 @@ assert( pOrig!=0 ); db = pParse->db; pDup = sqlite3ExprDup(db, pOrig, 0); - if( pDup==0 ) return; - if( zType[0]!='G' ) incrAggFunctionDepth(pDup, nSubquery); - if( pExpr->op==TK_COLLATE ){ - pDup = sqlite3ExprAddCollateString(pParse, pDup, pExpr->u.zToken); - } - ExprSetProperty(pDup, EP_Alias); + if( pDup!=0 ){ + if( zType[0]!='G' ) incrAggFunctionDepth(pDup, nSubquery); + if( pExpr->op==TK_COLLATE ){ + pDup = sqlite3ExprAddCollateString(pParse, pDup, pExpr->u.zToken); + } + ExprSetProperty(pDup, EP_Alias); - /* Before calling sqlite3ExprDelete(), set the EP_Static flag. This - ** prevents ExprDelete() from deleting the Expr structure itself, - ** allowing it to be repopulated by the memcpy() on the following line. - ** The pExpr->u.zToken might point into memory that will be freed by the - ** sqlite3DbFree(db, pDup) on the last line of this block, so be sure to - ** make a copy of the token before doing the sqlite3DbFree(). - */ - ExprSetProperty(pExpr, EP_Static); - sqlite3ExprDelete(db, pExpr); - memcpy(pExpr, pDup, sizeof(*pExpr)); - if( !ExprHasProperty(pExpr, EP_IntValue) && pExpr->u.zToken!=0 ){ - assert( (pExpr->flags & (EP_Reduced|EP_TokenOnly))==0 ); - pExpr->u.zToken = sqlite3DbStrDup(db, pExpr->u.zToken); - pExpr->flags |= EP_MemToken; + /* Before calling sqlite3ExprDelete(), set the EP_Static flag. This + ** prevents ExprDelete() from deleting the Expr structure itself, + ** allowing it to be repopulated by the memcpy() on the following line. + ** The pExpr->u.zToken might point into memory that will be freed by the + ** sqlite3DbFree(db, pDup) on the last line of this block, so be sure to + ** make a copy of the token before doing the sqlite3DbFree(). + */ + ExprSetProperty(pExpr, EP_Static); + sqlite3ExprDelete(db, pExpr); + memcpy(pExpr, pDup, sizeof(*pExpr)); + if( !ExprHasProperty(pExpr, EP_IntValue) && pExpr->u.zToken!=0 ){ + assert( (pExpr->flags & (EP_Reduced|EP_TokenOnly))==0 ); + pExpr->u.zToken = sqlite3DbStrDup(db, pExpr->u.zToken); + pExpr->flags |= EP_MemToken; + } + sqlite3DbFree(db, pDup); } - sqlite3DbFree(db, pDup); + ExprSetProperty(pExpr, EP_Alias); } @@ -90212,7 +94592,7 @@ ** (even if X is implied). ** pExpr->iTable Set to the cursor number for the table obtained ** from pSrcList. -** pExpr->pTab Points to the Table structure of X.Y (even if +** pExpr->y.pTab Points to the Table structure of X.Y (even if ** X and/or Y are implied.) ** pExpr->iColumn Set to the column number within the table. ** pExpr->op Set to TK_COLUMN. @@ -90246,7 +94626,7 @@ struct SrcList_item *pMatch = 0; /* The matching pSrcList item */ NameContext *pTopNC = pNC; /* First namecontext in the list */ Schema *pSchema = 0; /* Schema of the expression */ - int isTrigger = 0; /* True if resolved to a trigger column */ + int eNewExprOp = TK_COLUMN; /* New value for pExpr->op on success */ Table *pTab = 0; /* Table hold the row */ Column *pCol; /* A column of pTab */ @@ -90256,7 +94636,6 @@ /* Initialize the node to no-match */ pExpr->iTable = -1; - pExpr->pTab = 0; ExprSetVVAProperty(pExpr, EP_NoReduce); /* Translate the schema name in zDb into a pointer to the corresponding @@ -90317,6 +94696,9 @@ if( sqlite3StrICmp(zTabName, zTab)!=0 ){ continue; } + if( IN_RENAME_OBJECT && pItem->zAlias ){ + sqlite3RenameTokenRemap(pParse, 0, (void*)&pExpr->y.pTab); + } } if( 0==(cntTab++) ){ pMatch = pItem; @@ -90341,32 +94723,45 @@ } if( pMatch ){ pExpr->iTable = pMatch->iCursor; - pExpr->pTab = pMatch->pTab; + pExpr->y.pTab = pMatch->pTab; /* RIGHT JOIN not (yet) supported */ assert( (pMatch->fg.jointype & JT_RIGHT)==0 ); if( (pMatch->fg.jointype & JT_LEFT)!=0 ){ ExprSetProperty(pExpr, EP_CanBeNull); } - pSchema = pExpr->pTab->pSchema; + pSchema = pExpr->y.pTab->pSchema; } } /* if( pSrcList ) */ -#ifndef SQLITE_OMIT_TRIGGER +#if !defined(SQLITE_OMIT_TRIGGER) || !defined(SQLITE_OMIT_UPSERT) /* If we have not already resolved the name, then maybe - ** it is a new.* or old.* trigger argument reference + ** it is a new.* or old.* trigger argument reference. Or + ** maybe it is an excluded.* from an upsert. */ - if( zDb==0 && zTab!=0 && cntTab==0 && pParse->pTriggerTab!=0 ){ - int op = pParse->eTriggerOp; - assert( op==TK_DELETE || op==TK_UPDATE || op==TK_INSERT ); - if( op!=TK_DELETE && sqlite3StrICmp("new",zTab) == 0 ){ - pExpr->iTable = 1; - pTab = pParse->pTriggerTab; - }else if( op!=TK_INSERT && sqlite3StrICmp("old",zTab)==0 ){ - pExpr->iTable = 0; - pTab = pParse->pTriggerTab; - }else{ - pTab = 0; + if( zDb==0 && zTab!=0 && cntTab==0 ){ + pTab = 0; +#ifndef SQLITE_OMIT_TRIGGER + if( pParse->pTriggerTab!=0 ){ + int op = pParse->eTriggerOp; + assert( op==TK_DELETE || op==TK_UPDATE || op==TK_INSERT ); + if( op!=TK_DELETE && sqlite3StrICmp("new",zTab) == 0 ){ + pExpr->iTable = 1; + pTab = pParse->pTriggerTab; + }else if( op!=TK_INSERT && sqlite3StrICmp("old",zTab)==0 ){ + pExpr->iTable = 0; + pTab = pParse->pTriggerTab; + } } +#endif /* SQLITE_OMIT_TRIGGER */ +#ifndef SQLITE_OMIT_UPSERT + if( (pNC->ncFlags & NC_UUpsert)!=0 ){ + Upsert *pUpsert = pNC->uNC.pUpsert; + if( pUpsert && sqlite3StrICmp("excluded",zTab)==0 ){ + pTab = pUpsert->pUpsertSrc->a[0].pTab; + pExpr->iTable = 2; + } + } +#endif /* SQLITE_OMIT_UPSERT */ if( pTab ){ int iCol; @@ -90386,24 +94781,42 @@ } if( iColnCol ){ cnt++; - if( iCol<0 ){ - pExpr->affinity = SQLITE_AFF_INTEGER; - }else if( pExpr->iTable==0 ){ - testcase( iCol==31 ); - testcase( iCol==32 ); - pParse->oldmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<newmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<iTable==2 ){ + testcase( iCol==(-1) ); + if( IN_RENAME_OBJECT ){ + pExpr->iColumn = iCol; + pExpr->y.pTab = pTab; + eNewExprOp = TK_COLUMN; + }else{ + pExpr->iTable = pNC->uNC.pUpsert->regData + iCol; + eNewExprOp = TK_REGISTER; + ExprSetProperty(pExpr, EP_Alias); + } + }else +#endif /* SQLITE_OMIT_UPSERT */ + { +#ifndef SQLITE_OMIT_TRIGGER + if( iCol<0 ){ + pExpr->affinity = SQLITE_AFF_INTEGER; + }else if( pExpr->iTable==0 ){ + testcase( iCol==31 ); + testcase( iCol==32 ); + pParse->oldmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<newmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<y.pTab = pTab; + pExpr->iColumn = (i16)iCol; + eNewExprOp = TK_TRIGGER; +#endif /* SQLITE_OMIT_TRIGGER */ } - pExpr->iColumn = (i16)iCol; - pExpr->pTab = pTab; - isTrigger = 1; } } } -#endif /* !defined(SQLITE_OMIT_TRIGGER) */ +#endif /* !defined(SQLITE_OMIT_TRIGGER) || !defined(SQLITE_OMIT_UPSERT) */ /* ** Perhaps the name is a reference to the ROWID @@ -90438,10 +94851,12 @@ ** is supported for backwards compatibility only. Hence, we issue a warning ** on sqlite3_log() whenever the capability is used. */ - if( (pEList = pNC->pEList)!=0 + if( (pNC->ncFlags & NC_UEList)!=0 + && cnt==0 && zTab==0 - && cnt==0 ){ + pEList = pNC->uNC.pEList; + assert( pEList!=0 ); for(j=0; jnExpr; j++){ char *zAs = pEList->a[j].zName; if( zAs!=0 && sqlite3StrICmp(zAs, zCol)==0 ){ @@ -90462,6 +94877,9 @@ cnt = 1; pMatch = 0; assert( zTab==0 && zDb==0 ); + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenRemap(pParse, 0, (void*)pExpr); + } goto lookupname_end; } } @@ -90486,10 +94904,16 @@ ** Because no reference was made to outer contexts, the pNC->nRef ** fields are not changed in any context. */ - if( cnt==0 && zTab==0 && ExprHasProperty(pExpr,EP_DblQuoted) ){ - pExpr->op = TK_STRING; - pExpr->pTab = 0; - return WRC_Prune; + if( cnt==0 && zTab==0 ){ + assert( pExpr->op==TK_ID ); + if( ExprHasProperty(pExpr,EP_DblQuoted) ){ + pExpr->op = TK_STRING; + pExpr->y.pTab = 0; + return WRC_Prune; + } + if( sqlite3ExprIdToTrueFalse(pExpr) ){ + return WRC_Prune; + } } /* @@ -90532,7 +94956,7 @@ pExpr->pLeft = 0; sqlite3ExprDelete(db, pExpr->pRight); pExpr->pRight = 0; - pExpr->op = (isTrigger ? TK_TRIGGER : TK_COLUMN); + pExpr->op = eNewExprOp; ExprSetProperty(pExpr, EP_Leaf); lookupname_end: if( cnt==1 ){ @@ -90562,9 +94986,9 @@ Expr *p = sqlite3ExprAlloc(db, TK_COLUMN, 0, 0); if( p ){ struct SrcList_item *pItem = &pSrc->a[iSrc]; - p->pTab = pItem->pTab; + p->y.pTab = pItem->pTab; p->iTable = pItem->iCursor; - if( p->pTab->iPKey==iCol ){ + if( p->y.pTab->iPKey==iCol ){ p->iColumn = -1; }else{ p->iColumn = (ynVar)iCol; @@ -90651,9 +95075,10 @@ SrcList *pSrcList = pNC->pSrcList; struct SrcList_item *pItem; assert( pSrcList && pSrcList->nSrc==1 ); - pItem = pSrcList->a; + pItem = pSrcList->a; + assert( HasRowid(pItem->pTab) && pItem->pTab->pSelect==0 ); pExpr->op = TK_COLUMN; - pExpr->pTab = pItem->pTab; + pExpr->y.pTab = pItem->pTab; pExpr->iTable = pItem->iCursor; pExpr->iColumn = -1; pExpr->affinity = SQLITE_AFF_INTEGER; @@ -90682,18 +95107,23 @@ zTable = 0; zColumn = pExpr->u.zToken; }else{ + Expr *pLeft = pExpr->pLeft; notValid(pParse, pNC, "the \".\" operator", NC_IdxExpr); pRight = pExpr->pRight; if( pRight->op==TK_ID ){ zDb = 0; - zTable = pExpr->pLeft->u.zToken; - zColumn = pRight->u.zToken; }else{ assert( pRight->op==TK_DOT ); - zDb = pExpr->pLeft->u.zToken; - zTable = pRight->pLeft->u.zToken; - zColumn = pRight->pRight->u.zToken; + zDb = pLeft->u.zToken; + pLeft = pRight->pLeft; + pRight = pRight->pRight; } + zTable = pLeft->u.zToken; + zColumn = pRight->u.zToken; + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenRemap(pParse, (void*)pExpr, (void*)pRight); + sqlite3RenameTokenRemap(pParse, (void*)&pExpr->y.pTab, (void*)pLeft); + } } return lookupName(pParse, zDb, zTable, zColumn, pNC, pExpr); } @@ -90774,41 +95204,105 @@ notValid(pParse, pNC, "non-deterministic functions", NC_IdxExpr|NC_PartIdx); } + if( (pDef->funcFlags & SQLITE_FUNC_INTERNAL)!=0 + && pParse->nested==0 + && sqlite3Config.bInternalFunctions==0 + ){ + /* Internal-use-only functions are disallowed unless the + ** SQL is being compiled using sqlite3NestedParse() */ + no_such_func = 1; + pDef = 0; + } } - if( is_agg && (pNC->ncFlags & NC_AllowAgg)==0 ){ - sqlite3ErrorMsg(pParse, "misuse of aggregate function %.*s()", nId,zId); - pNC->nErr++; - is_agg = 0; - }else if( no_such_func && pParse->db->init.busy==0 + + if( 0==IN_RENAME_OBJECT ){ +#ifndef SQLITE_OMIT_WINDOWFUNC + assert( is_agg==0 || (pDef->funcFlags & SQLITE_FUNC_MINMAX) + || (pDef->xValue==0 && pDef->xInverse==0) + || (pDef->xValue && pDef->xInverse && pDef->xSFunc && pDef->xFinalize) + ); + if( pDef && pDef->xValue==0 && ExprHasProperty(pExpr, EP_WinFunc) ){ + sqlite3ErrorMsg(pParse, + "%.*s() may not be used as a window function", nId, zId + ); + pNC->nErr++; + }else if( + (is_agg && (pNC->ncFlags & NC_AllowAgg)==0) + || (is_agg && (pDef->funcFlags&SQLITE_FUNC_WINDOW) && !pExpr->y.pWin) + || (is_agg && pExpr->y.pWin && (pNC->ncFlags & NC_AllowWin)==0) + ){ + const char *zType; + if( (pDef->funcFlags & SQLITE_FUNC_WINDOW) || pExpr->y.pWin ){ + zType = "window"; + }else{ + zType = "aggregate"; + } + sqlite3ErrorMsg(pParse, "misuse of %s function %.*s()",zType,nId,zId); + pNC->nErr++; + is_agg = 0; + } +#else + if( (is_agg && (pNC->ncFlags & NC_AllowAgg)==0) ){ + sqlite3ErrorMsg(pParse,"misuse of aggregate function %.*s()",nId,zId); + pNC->nErr++; + is_agg = 0; + } +#endif + else if( no_such_func && pParse->db->init.busy==0 #ifdef SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION - && pParse->explain==0 + && pParse->explain==0 #endif - ){ - sqlite3ErrorMsg(pParse, "no such function: %.*s", nId, zId); - pNC->nErr++; - }else if( wrong_num_args ){ - sqlite3ErrorMsg(pParse,"wrong number of arguments to function %.*s()", - nId, zId); - pNC->nErr++; + ){ + sqlite3ErrorMsg(pParse, "no such function: %.*s", nId, zId); + pNC->nErr++; + }else if( wrong_num_args ){ + sqlite3ErrorMsg(pParse,"wrong number of arguments to function %.*s()", + nId, zId); + pNC->nErr++; + } + if( is_agg ){ +#ifndef SQLITE_OMIT_WINDOWFUNC + pNC->ncFlags &= ~(pExpr->y.pWin ? NC_AllowWin : NC_AllowAgg); +#else + pNC->ncFlags &= ~NC_AllowAgg; +#endif + } } - if( is_agg ) pNC->ncFlags &= ~NC_AllowAgg; sqlite3WalkExprList(pWalker, pList); if( is_agg ){ - NameContext *pNC2 = pNC; - pExpr->op = TK_AGG_FUNCTION; - pExpr->op2 = 0; - while( pNC2 && !sqlite3FunctionUsesThisSrc(pExpr, pNC2->pSrcList) ){ - pExpr->op2++; - pNC2 = pNC2->pNext; - } - assert( pDef!=0 ); - if( pNC2 ){ - assert( SQLITE_FUNC_MINMAX==NC_MinMaxAgg ); - testcase( (pDef->funcFlags & SQLITE_FUNC_MINMAX)!=0 ); - pNC2->ncFlags |= NC_HasAgg | (pDef->funcFlags & SQLITE_FUNC_MINMAX); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pExpr->y.pWin ){ + Select *pSel = pNC->pWinSelect; + sqlite3WalkExprList(pWalker, pExpr->y.pWin->pPartition); + sqlite3WalkExprList(pWalker, pExpr->y.pWin->pOrderBy); + sqlite3WalkExpr(pWalker, pExpr->y.pWin->pFilter); + sqlite3WindowUpdate(pParse, pSel->pWinDefn, pExpr->y.pWin, pDef); + if( 0==pSel->pWin + || 0==sqlite3WindowCompare(pParse, pSel->pWin, pExpr->y.pWin) + ){ + pExpr->y.pWin->pNextWin = pSel->pWin; + pSel->pWin = pExpr->y.pWin; + } + pNC->ncFlags |= NC_AllowWin; + }else +#endif /* SQLITE_OMIT_WINDOWFUNC */ + { + NameContext *pNC2 = pNC; + pExpr->op = TK_AGG_FUNCTION; + pExpr->op2 = 0; + while( pNC2 && !sqlite3FunctionUsesThisSrc(pExpr, pNC2->pSrcList) ){ + pExpr->op2++; + pNC2 = pNC2->pNext; + } + assert( pDef!=0 ); + if( pNC2 ){ + assert( SQLITE_FUNC_MINMAX==NC_MinMaxAgg ); + testcase( (pDef->funcFlags & SQLITE_FUNC_MINMAX)!=0 ); + pNC2->ncFlags |= NC_HasAgg | (pDef->funcFlags & SQLITE_FUNC_MINMAX); + } + pNC->ncFlags |= NC_AllowAgg; } - pNC->ncFlags |= NC_AllowAgg; } /* FIX ME: Compute pExpr->affinity based on the expected return ** type of the function @@ -90837,6 +95331,23 @@ notValid(pParse, pNC, "parameters", NC_IsCheck|NC_PartIdx|NC_IdxExpr); break; } + case TK_IS: + case TK_ISNOT: { + Expr *pRight; + assert( !ExprHasProperty(pExpr, EP_Reduced) ); + /* Handle special cases of "x IS TRUE", "x IS FALSE", "x IS NOT TRUE", + ** and "x IS NOT FALSE". */ + if( (pRight = pExpr->pRight)->op==TK_ID ){ + int rc = resolveExprStep(pWalker, pRight); + if( rc==WRC_Abort ) return WRC_Abort; + if( pRight->op==TK_TRUEFALSE ){ + pExpr->op2 = pExpr->op; + pExpr->op = TK_TRUTH; + return WRC_Continue; + } + } + /* Fall thru */ + } case TK_BETWEEN: case TK_EQ: case TK_NE: @@ -90843,9 +95354,7 @@ case TK_LT: case TK_LE: case TK_GT: - case TK_GE: - case TK_IS: - case TK_ISNOT: { + case TK_GE: { int nLeft, nRight; if( pParse->db->mallocFailed ) break; assert( pExpr->pLeft!=0 ); @@ -90948,8 +95457,8 @@ memset(&nc, 0, sizeof(nc)); nc.pParse = pParse; nc.pSrcList = pSelect->pSrc; - nc.pEList = pEList; - nc.ncFlags = NC_AllowAgg; + nc.uNC.pEList = pEList; + nc.ncFlags = NC_AllowAgg|NC_UEList; nc.nErr = 0; db = pParse->db; savedSuppErr = db->suppressErr; @@ -91014,12 +95523,10 @@ pOrderBy = pSelect->pOrderBy; if( pOrderBy==0 ) return 0; db = pParse->db; -#if SQLITE_MAX_COLUMN if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ sqlite3ErrorMsg(pParse, "too many terms in ORDER BY clause"); return 1; } -#endif for(i=0; inExpr; i++){ pOrderBy->a[i].done = 0; } @@ -91111,12 +95618,10 @@ struct ExprList_item *pItem; if( pOrderBy==0 || pParse->db->mallocFailed ) return 0; -#if SQLITE_MAX_COLUMN if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ sqlite3ErrorMsg(pParse, "too many terms in %s BY clause", zType); return 1; } -#endif pEList = pSelect->pEList; assert( pEList!=0 ); /* sqlite3SelectNew() guarantees this */ for(i=0, pItem=pOrderBy->a; inExpr; i++, pItem++){ @@ -91198,6 +95703,19 @@ } for(j=0; jpEList->nExpr; j++){ if( sqlite3ExprCompare(0, pE, pSelect->pEList->a[j].pExpr, -1)==0 ){ +#ifndef SQLITE_OMIT_WINDOWFUNC + if( ExprHasProperty(pE, EP_WinFunc) ){ + /* Since this window function is being changed into a reference + ** to the same window function the result set, remove the instance + ** of this window function from the Select.pWin list. */ + Window **pp; + for(pp=&pSelect->pWin; *pp; pp=&(*pp)->pNextWin){ + if( *pp==pE->y.pWin ){ + *pp = (*pp)->pNextWin; + } + } + } +#endif pItem->u.x.iOrderByCol = j+1; } } @@ -91254,8 +95772,8 @@ */ memset(&sNC, 0, sizeof(sNC)); sNC.pParse = pParse; - if( sqlite3ResolveExprNames(&sNC, p->pLimit) || - sqlite3ResolveExprNames(&sNC, p->pOffset) ){ + sNC.pWinSelect = p; + if( sqlite3ResolveExprNames(&sNC, p->pLimit) ){ return WRC_Abort; } @@ -91303,12 +95821,13 @@ /* Set up the local name-context to pass to sqlite3ResolveExprNames() to ** resolve the result-set expression list. */ - sNC.ncFlags = NC_AllowAgg; + sNC.ncFlags = NC_AllowAgg|NC_AllowWin; sNC.pSrcList = p->pSrc; sNC.pNext = pOuterNC; /* Resolve names in the result set. */ if( sqlite3ResolveExprListNames(&sNC, p->pEList) ) return WRC_Abort; + sNC.ncFlags &= ~NC_AllowWin; /* If there are no aggregate functions in the result-set, and no GROUP BY ** expression, do not allow aggregates in any of the other expressions. @@ -91337,7 +95856,9 @@ ** Minor point: If this is the case, then the expression will be ** re-evaluated for each reference to it. */ - sNC.pEList = p->pEList; + assert( (sNC.ncFlags & (NC_UAggInfo|NC_UUpsert))==0 ); + sNC.uNC.pEList = p->pEList; + sNC.ncFlags |= NC_UEList; if( sqlite3ResolveExprNames(&sNC, p->pHaving) ) return WRC_Abort; if( sqlite3ResolveExprNames(&sNC, p->pWhere) ) return WRC_Abort; @@ -91355,7 +95876,7 @@ ** outer queries */ sNC.pNext = 0; - sNC.ncFlags |= NC_AllowAgg; + sNC.ncFlags |= NC_AllowAgg|NC_AllowWin; /* If this is a converted compound query, move the ORDER BY clause from ** the sub-query back to the parent query. At this point each term @@ -91386,6 +95907,7 @@ if( db->mallocFailed ){ return WRC_Abort; } + sNC.ncFlags &= ~NC_AllowWin; /* Resolve the GROUP BY clause. At the same time, make sure ** the GROUP BY clause does not contain aggregate functions. @@ -91570,7 +96092,7 @@ Table *pTab, /* The table being referenced */ int type, /* NC_IsCheck or NC_PartIdx or NC_IdxExpr */ Expr *pExpr, /* Expression to resolve. May be NULL. */ - ExprList *pList /* Expression list to resolve. May be NUL. */ + ExprList *pList /* Expression list to resolve. May be NULL. */ ){ SrcList sSrc; /* Fake SrcList for pParse->pNewTable */ NameContext sNC; /* Name context for pParse->pNewTable */ @@ -91651,8 +96173,8 @@ return sqlite3AffinityType(pExpr->u.zToken, 0); } #endif - if( (op==TK_AGG_COLUMN || op==TK_COLUMN) && pExpr->pTab ){ - return sqlite3TableColumnAffinity(pExpr->pTab, pExpr->iColumn); + if( (op==TK_AGG_COLUMN || op==TK_COLUMN) && pExpr->y.pTab ){ + return sqlite3TableColumnAffinity(pExpr->y.pTab, pExpr->iColumn); } if( op==TK_SELECT_COLUMN ){ assert( pExpr->pLeft->flags&EP_xIsSelect ); @@ -91717,6 +96239,11 @@ ** Return the collation sequence for the expression pExpr. If ** there is no defined collating sequence, return NULL. ** +** See also: sqlite3ExprNNCollSeq() +** +** The sqlite3ExprNNCollSeq() works the same exact that it returns the +** default collation if pExpr has no defined collation. +** ** The collating sequence might be determined by a COLLATE operator ** or by the presence of a column with a defined collating sequence. ** COLLATE operators take first precedence. Left operands take @@ -91729,27 +96256,27 @@ while( p ){ int op = p->op; if( p->flags & EP_Generic ) break; - if( op==TK_CAST || op==TK_UPLUS ){ - p = p->pLeft; - continue; - } - if( op==TK_COLLATE || (op==TK_REGISTER && p->op2==TK_COLLATE) ){ - pColl = sqlite3GetCollSeq(pParse, ENC(db), 0, p->u.zToken); - break; - } if( (op==TK_AGG_COLUMN || op==TK_COLUMN || op==TK_REGISTER || op==TK_TRIGGER) - && p->pTab!=0 + && p->y.pTab!=0 ){ - /* op==TK_REGISTER && p->pTab!=0 happens when pExpr was originally + /* op==TK_REGISTER && p->y.pTab!=0 happens when pExpr was originally ** a TK_COLUMN but was previously evaluated and cached in a register */ int j = p->iColumn; if( j>=0 ){ - const char *zColl = p->pTab->aCol[j].zColl; + const char *zColl = p->y.pTab->aCol[j].zColl; pColl = sqlite3FindCollSeq(db, ENC(db), zColl, 0); } break; } + if( op==TK_CAST || op==TK_UPLUS ){ + p = p->pLeft; + continue; + } + if( op==TK_COLLATE || (op==TK_REGISTER && p->op2==TK_COLLATE) ){ + pColl = sqlite3GetCollSeq(pParse, ENC(db), 0, p->u.zToken); + break; + } if( p->flags & EP_Collate ){ if( p->pLeft && (p->pLeft->flags & EP_Collate)!=0 ){ p = p->pLeft; @@ -91782,6 +96309,32 @@ } /* +** Return the collation sequence for the expression pExpr. If +** there is no defined collating sequence, return a pointer to the +** defautl collation sequence. +** +** See also: sqlite3ExprCollSeq() +** +** The sqlite3ExprCollSeq() routine works the same except that it +** returns NULL if there is no defined collation. +*/ +SQLITE_PRIVATE CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr){ + CollSeq *p = sqlite3ExprCollSeq(pParse, pExpr); + if( p==0 ) p = pParse->db->pDfltColl; + assert( p!=0 ); + return p; +} + +/* +** Return TRUE if the two expressions have equivalent collating sequences. +*/ +SQLITE_PRIVATE int sqlite3ExprCollSeqMatch(Parse *pParse, Expr *pE1, Expr *pE2){ + CollSeq *pColl1 = sqlite3ExprNNCollSeq(pParse, pE1); + CollSeq *pColl2 = sqlite3ExprNNCollSeq(pParse, pE2); + return sqlite3StrICmp(pColl1->zName, pColl2->zName)==0; +} + +/* ** pExpr is an operand of a comparison operator. aff2 is the ** type affinity of the other operand. This routine returns the ** type affinity that should be used for the comparison operator. @@ -92143,7 +96696,6 @@ Expr *pL, *pR; int r1, r2; assert( i>=0 && i0 ) sqlite3ExprCachePush(pParse); r1 = exprVectorRegister(pParse, pLeft, i, regLeft, &pL, ®Free1); r2 = exprVectorRegister(pParse, pRight, i, regRight, &pR, ®Free2); codeCompare(pParse, pL, pR, opx, r1, r2, dest, p5); @@ -92155,7 +96707,6 @@ testcase(op==OP_Ne); VdbeCoverageIf(v,op==OP_Ne); sqlite3ReleaseTempReg(pParse, regFree1); sqlite3ReleaseTempReg(pParse, regFree2); - if( i>0 ) sqlite3ExprCachePop(pParse); if( i==nLeft-1 ){ break; } @@ -92220,16 +96771,15 @@ } } } -static void heightOfSelect(Select *p, int *pnHeight){ - if( p ){ +static void heightOfSelect(Select *pSelect, int *pnHeight){ + Select *p; + for(p=pSelect; p; p=p->pPrior){ heightOfExpr(p->pWhere, pnHeight); heightOfExpr(p->pHaving, pnHeight); heightOfExpr(p->pLimit, pnHeight); - heightOfExpr(p->pOffset, pnHeight); heightOfExprList(p->pEList, pnHeight); heightOfExprList(p->pGroupBy, pnHeight); heightOfExprList(p->pOrderBy, pnHeight); - heightOfSelect(p->pPrior, pnHeight); } } @@ -92368,7 +96918,7 @@ ){ Token x; x.z = zToken; - x.n = zToken ? sqlite3Strlen30(zToken) : 0; + x.n = sqlite3Strlen30(zToken); return sqlite3ExprAlloc(db, op, &x, 0); } @@ -92504,7 +97054,12 @@ ** Construct a new expression node for a function with multiple ** arguments. */ -SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse *pParse, ExprList *pList, Token *pToken){ +SQLITE_PRIVATE Expr *sqlite3ExprFunction( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* Argument list */ + Token *pToken, /* Name of the function */ + int eDistinct /* SF_Distinct or SF_ALL or 0 */ +){ Expr *pNew; sqlite3 *db = pParse->db; assert( pToken ); @@ -92513,9 +97068,14 @@ sqlite3ExprListDelete(db, pList); /* Avoid memory leak when malloc fails */ return 0; } + if( pList && pList->nExpr > pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){ + sqlite3ErrorMsg(pParse, "too many arguments on function %T", pToken); + } pNew->x.pList = pList; + ExprSetProperty(pNew, EP_HasFunc); assert( !ExprHasProperty(pNew, EP_xIsSelect) ); sqlite3ExprSetHeightAndFlags(pParse, pNew); + if( eDistinct==SF_Distinct ) ExprSetProperty(pNew, EP_Distinct); return pNew; } @@ -92607,6 +97167,10 @@ assert( p!=0 ); /* Sanity check: Assert that the IntValue is non-negative if it exists */ assert( !ExprHasProperty(p, EP_IntValue) || p->u.iValue>=0 ); + + assert( !ExprHasProperty(p, EP_WinFunc) || p->y.pWin!=0 || db->mallocFailed ); + assert( p->op!=TK_FUNCTION || ExprHasProperty(p, EP_TokenOnly|EP_Reduced) + || p->y.pWin==0 || ExprHasProperty(p, EP_WinFunc) ); #ifdef SQLITE_DEBUG if( ExprHasProperty(p, EP_Leaf) && !ExprHasProperty(p, EP_TokenOnly) ){ assert( p->pLeft==0 ); @@ -92625,6 +97189,10 @@ }else{ sqlite3ExprListDelete(db, p->x.pList); } + if( ExprHasProperty(p, EP_WinFunc) ){ + assert( p->op==TK_FUNCTION ); + sqlite3WindowDelete(db, p->y.pWin); + } } if( ExprHasProperty(p, EP_MemToken) ) sqlite3DbFree(db, p->u.zToken); if( !ExprHasProperty(p, EP_Static) ){ @@ -92673,7 +97241,7 @@ ** Note that with flags==EXPRDUP_REDUCE, this routines works on full-size ** (unreduced) Expr objects as they or originally constructed by the parser. ** During expression analysis, extra information is computed and moved into -** later parts of teh Expr object and that extra information might get chopped +** later parts of the Expr object and that extra information might get chopped ** off if the expression is reduced. Note also that it does not work to ** make an EXPRDUP_REDUCE copy of a reduced expression. It is only legal ** to reduce a pristine expression tree from the parser. The implementation @@ -92685,7 +97253,11 @@ assert( flags==EXPRDUP_REDUCE || flags==0 ); /* Only one flag value allowed */ assert( EXPR_FULLSIZE<=0xfff ); assert( (0xfff & (EP_Reduced|EP_TokenOnly))==0 ); - if( 0==flags || p->op==TK_SELECT_COLUMN ){ + if( 0==flags || p->op==TK_SELECT_COLUMN +#ifndef SQLITE_OMIT_WINDOWFUNC + || ExprHasProperty(p, EP_WinFunc) +#endif + ){ nSize = EXPR_FULLSIZE; }else{ assert( !ExprHasProperty(p, EP_TokenOnly|EP_Reduced) ); @@ -92710,7 +97282,7 @@ static int dupedExprNodeSize(Expr *p, int flags){ int nByte = dupedExprStructSize(p, flags) & 0xfff; if( !ExprHasProperty(p, EP_IntValue) && p->u.zToken ){ - nByte += sqlite3Strlen30(p->u.zToken)+1; + nByte += sqlite3Strlen30NN(p->u.zToken)+1; } return ROUND8(nByte); } @@ -92813,7 +97385,7 @@ } /* Fill in pNew->pLeft and pNew->pRight. */ - if( ExprHasProperty(pNew, EP_Reduced|EP_TokenOnly) ){ + if( ExprHasProperty(pNew, EP_Reduced|EP_TokenOnly|EP_WinFunc) ){ zAlloc += dupedExprNodeSize(p, dupFlags); if( !ExprHasProperty(pNew, EP_TokenOnly|EP_Leaf) ){ pNew->pLeft = p->pLeft ? @@ -92821,6 +97393,12 @@ pNew->pRight = p->pRight ? exprDup(db, p->pRight, EXPRDUP_REDUCE, &zAlloc) : 0; } +#ifndef SQLITE_OMIT_WINDOWFUNC + if( ExprHasProperty(p, EP_WinFunc) ){ + pNew->y.pWin = sqlite3WindowDup(db, pNew, p->y.pWin); + assert( ExprHasProperty(pNew, EP_WinFunc) ); + } +#endif /* SQLITE_OMIT_WINDOWFUNC */ if( pzBuffer ){ *pzBuffer = zAlloc; } @@ -92895,10 +97473,9 @@ Expr *pPriorSelectCol = 0; assert( db!=0 ); if( p==0 ) return 0; - pNew = sqlite3DbMallocRawNN(db, - sizeof(*pNew)+sizeof(pNew->a[0])*(p->nExpr-1) ); + pNew = sqlite3DbMallocRawNN(db, sqlite3DbMallocSize(db, p)); if( pNew==0 ) return 0; - pNew->nAlloc = pNew->nExpr = p->nExpr; + pNew->nExpr = p->nExpr; pItem = pNew->a; pOldItem = p->a; for(i=0; inExpr; i++, pItem++, pOldItem++){ @@ -92926,6 +97503,7 @@ pItem->sortOrder = pOldItem->sortOrder; pItem->done = 0; pItem->bSpanIsTab = pOldItem->bSpanIsTab; + pItem->bSorterRef = pOldItem->bSorterRef; pItem->u = pOldItem->u; } return pNew; @@ -93024,7 +97602,6 @@ pNew->pNext = pNext; pNew->pPrior = 0; pNew->pLimit = sqlite3ExprDup(db, p->pLimit, flags); - pNew->pOffset = sqlite3ExprDup(db, p->pOffset, flags); pNew->iLimit = 0; pNew->iOffset = 0; pNew->selFlags = p->selFlags & ~SF_UsesEphemeral; @@ -93032,7 +97609,11 @@ pNew->addrOpenEphm[1] = -1; pNew->nSelectRow = p->nSelectRow; pNew->pWith = withDup(db, p->pWith); - sqlite3SelectSetName(pNew, p->zSelName); +#ifndef SQLITE_OMIT_WINDOWFUNC + pNew->pWin = 0; + pNew->pWinDefn = sqlite3WindowListDup(db, p->pWinDefn); +#endif + pNew->selId = p->selId; *pp = pNew; pp = &pNew->pPrior; pNext = pNew; @@ -93052,6 +97633,13 @@ ** Add a new element to the end of an expression list. If pList is ** initially NULL, then create a new expression list. ** +** The pList argument must be either NULL or a pointer to an ExprList +** obtained from a prior call to sqlite3ExprListAppend(). This routine +** may not be used with an ExprList obtained from sqlite3ExprListDup(). +** Reason: This routine assumes that the number of slots in pList->a[] +** is a power of two. That is true for sqlite3ExprListAppend() returns +** but is not necessarily true from the return value of sqlite3ExprListDup(). +** ** If a memory allocation error occurs, the entire list is freed and ** NULL is returned. If non-NULL is returned, then it is guaranteed ** that the new entry was successfully appended. @@ -93070,16 +97658,14 @@ goto no_mem; } pList->nExpr = 0; - pList->nAlloc = 1; - }else if( pList->nExpr==pList->nAlloc ){ + }else if( (pList->nExpr & (pList->nExpr-1))==0 ){ ExprList *pNew; pNew = sqlite3DbRealloc(db, pList, - sizeof(*pList)+(2*pList->nAlloc - 1)*sizeof(pList->a[0])); + sizeof(*pList)+(2*pList->nExpr - 1)*sizeof(pList->a[0])); if( pNew==0 ){ goto no_mem; } pList = pNew; - pList->nAlloc *= 2; } pItem = &pList->a[pList->nExpr++]; assert( offsetof(struct ExprList_item,zName)==sizeof(pItem->pExpr) ); @@ -93199,6 +97785,9 @@ assert( pItem->zName==0 ); pItem->zName = sqlite3DbStrNDup(pParse->db, pName->z, pName->n); if( dequote ) sqlite3Dequote(pItem->zName); + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenMap(pParse, (void*)pItem->zName, pName); + } } } @@ -93213,7 +97802,8 @@ SQLITE_PRIVATE void sqlite3ExprListSetSpan( Parse *pParse, /* Parsing context */ ExprList *pList, /* List to which to add the span. */ - ExprSpan *pSpan /* The span to be added */ + const char *zStart, /* Start of the span */ + const char *zEnd /* End of the span */ ){ sqlite3 *db = pParse->db; assert( pList!=0 || db->mallocFailed!=0 ); @@ -93220,10 +97810,8 @@ if( pList ){ struct ExprList_item *pItem = &pList->a[pList->nExpr-1]; assert( pList->nExpr>0 ); - assert( db->mallocFailed || pItem->pExpr==pSpan->pExpr ); sqlite3DbFree(db, pItem->zSpan); - pItem->zSpan = sqlite3DbStrNDup(db, (char*)pSpan->zStart, - (int)(pSpan->zEnd - pSpan->zStart)); + pItem->zSpan = sqlite3DbSpanDup(db, zStart, zEnd); } } @@ -93270,17 +97858,57 @@ SQLITE_PRIVATE u32 sqlite3ExprListFlags(const ExprList *pList){ int i; u32 m = 0; - if( pList ){ - for(i=0; inExpr; i++){ - Expr *pExpr = pList->a[i].pExpr; - assert( pExpr!=0 ); - m |= pExpr->flags; - } + assert( pList!=0 ); + for(i=0; inExpr; i++){ + Expr *pExpr = pList->a[i].pExpr; + assert( pExpr!=0 ); + m |= pExpr->flags; } return m; } /* +** This is a SELECT-node callback for the expression walker that +** always "fails". By "fail" in this case, we mean set +** pWalker->eCode to zero and abort. +** +** This callback is used by multiple expression walkers. +*/ +SQLITE_PRIVATE int sqlite3SelectWalkFail(Walker *pWalker, Select *NotUsed){ + UNUSED_PARAMETER(NotUsed); + pWalker->eCode = 0; + return WRC_Abort; +} + +/* +** If the input expression is an ID with the name "true" or "false" +** then convert it into an TK_TRUEFALSE term. Return non-zero if +** the conversion happened, and zero if the expression is unaltered. +*/ +SQLITE_PRIVATE int sqlite3ExprIdToTrueFalse(Expr *pExpr){ + assert( pExpr->op==TK_ID || pExpr->op==TK_STRING ); + if( sqlite3StrICmp(pExpr->u.zToken, "true")==0 + || sqlite3StrICmp(pExpr->u.zToken, "false")==0 + ){ + pExpr->op = TK_TRUEFALSE; + return 1; + } + return 0; +} + +/* +** The argument must be a TK_TRUEFALSE Expr node. Return 1 if it is TRUE +** and 0 if it is FALSE. +*/ +SQLITE_PRIVATE int sqlite3ExprTruthValue(const Expr *pExpr){ + assert( pExpr->op==TK_TRUEFALSE ); + assert( sqlite3StrICmp(pExpr->u.zToken,"true")==0 + || sqlite3StrICmp(pExpr->u.zToken,"false")==0 ); + return pExpr->u.zToken[4]==0; +} + + +/* ** These routines are Walker callbacks used to check expressions to ** see if they are "constant" for some definition of constant. The ** Walker.eCode value determines the type of "constant" we are looking @@ -93327,6 +97955,12 @@ return WRC_Abort; } case TK_ID: + /* Convert "true" or "false" in a DEFAULT clause into the + ** appropriate TK_TRUEFALSE operator */ + if( sqlite3ExprIdToTrueFalse(pExpr) ){ + return WRC_Prune; + } + /* Fall thru */ case TK_COLUMN: case TK_AGG_FUNCTION: case TK_AGG_COLUMN: @@ -93334,11 +97968,16 @@ testcase( pExpr->op==TK_COLUMN ); testcase( pExpr->op==TK_AGG_FUNCTION ); testcase( pExpr->op==TK_AGG_COLUMN ); + if( ExprHasProperty(pExpr, EP_FixedCol) && pWalker->eCode!=2 ){ + return WRC_Continue; + } if( pWalker->eCode==3 && pExpr->iTable==pWalker->u.iCur ){ return WRC_Continue; } /* Fall through */ case TK_IF_NULL_ROW: + case TK_REGISTER: + testcase( pExpr->op==TK_REGISTER ); testcase( pExpr->op==TK_IF_NULL_ROW ); pWalker->eCode = 0; return WRC_Abort; @@ -93356,21 +97995,16 @@ } /* Fall through */ default: - testcase( pExpr->op==TK_SELECT ); /* selectNodeIsConstant will disallow */ - testcase( pExpr->op==TK_EXISTS ); /* selectNodeIsConstant will disallow */ + testcase( pExpr->op==TK_SELECT ); /* sqlite3SelectWalkFail() disallows */ + testcase( pExpr->op==TK_EXISTS ); /* sqlite3SelectWalkFail() disallows */ return WRC_Continue; } } -static int selectNodeIsConstant(Walker *pWalker, Select *NotUsed){ - UNUSED_PARAMETER(NotUsed); - pWalker->eCode = 0; - return WRC_Abort; -} static int exprIsConst(Expr *p, int initFlag, int iCur){ Walker w; w.eCode = initFlag; w.xExprCallback = exprNodeIsConstant; - w.xSelectCallback = selectNodeIsConstant; + w.xSelectCallback = sqlite3SelectWalkFail; #ifdef SQLITE_DEBUG w.xSelectCallback2 = sqlite3SelectWalkAssert2; #endif @@ -93392,10 +98026,17 @@ } /* -** Walk an expression tree. Return non-zero if the expression is constant -** that does no originate from the ON or USING clauses of a join. -** Return 0 if it involves variables or function calls or terms from -** an ON or USING clause. +** Walk an expression tree. Return non-zero if +** +** (1) the expression is constant, and +** (2) the expression does originate in the ON or USING clause +** of a LEFT JOIN, and +** (3) the expression does not contain any EP_FixedCol TK_COLUMN +** operands created by the constant propagation optimization. +** +** When this routine returns true, it indicates that the expression +** can be added to the pParse->pConstExpr list and evaluated once when +** the prepared statement starts up. See sqlite3ExprCodeAtInit(). */ SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr *p){ return exprIsConst(p, 2, 0); @@ -93424,8 +98065,8 @@ for(i=0; inExpr; i++){ Expr *p = pGroupBy->a[i].pExpr; if( sqlite3ExprCompare(0, pExpr, p, -1)<2 ){ - CollSeq *pColl = sqlite3ExprCollSeq(pWalker->pParse, p); - if( pColl==0 || sqlite3_stricmp("BINARY", pColl->zName)==0 ){ + CollSeq *pColl = sqlite3ExprNNCollSeq(pWalker->pParse, p); + if( sqlite3IsBinary(pColl) ){ return WRC_Prune; } } @@ -93493,7 +98134,7 @@ Walker w; w.eCode = 1; w.xExprCallback = sqlite3ExprWalkNoop; - w.xSelectCallback = selectNodeIsConstant; + w.xSelectCallback = sqlite3SelectWalkFail; #ifdef SQLITE_DEBUG w.xSelectCallback2 = sqlite3SelectWalkAssert2; #endif @@ -93566,9 +98207,9 @@ case TK_BLOB: return 0; case TK_COLUMN: - assert( p->pTab!=0 ); return ExprHasProperty(p, EP_CanBeNull) || - (p->iColumn>=0 && p->pTab->aCol[p->iColumn].notNull==0); + p->y.pTab==0 || /* Reference to column of index on expression */ + (p->iColumn>=0 && p->y.pTab->aCol[p->iColumn].notNull==0); default: return 1; } @@ -93623,6 +98264,14 @@ if( sqlite3StrICmp(z, "OID")==0 ) return 1; return 0; } +#ifdef SQLITE_ENABLE_NORMALIZE +SQLITE_PRIVATE int sqlite3IsRowidN(const char *z, int n){ + if( sqlite3StrNICmp(z, "_ROWID_", n)==0 ) return 1; + if( sqlite3StrNICmp(z, "ROWID", n)==0 ) return 1; + if( sqlite3StrNICmp(z, "OID", n)==0 ) return 1; + return 0; +} +#endif /* ** pX is the RHS of an IN operator. If pX is a SELECT statement @@ -93649,7 +98298,6 @@ } assert( p->pGroupBy==0 ); /* Has no GROUP BY clause */ if( p->pLimit ) return 0; /* Has no LIMIT clause */ - assert( p->pOffset==0 ); /* No LIMIT means no OFFSET */ if( p->pWhere ) return 0; /* Has no WHERE clause */ pSrc = p->pSrc; assert( pSrc!=0 ); @@ -93739,16 +98387,15 @@ ** pX->iTable made to point to the ephemeral table instead of an ** existing table. ** -** The inFlags parameter must contain exactly one of the bits -** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP. If inFlags contains -** IN_INDEX_MEMBERSHIP, then the generated table will be used for a -** fast membership test. When the IN_INDEX_LOOP bit is set, the -** IN index will be used to loop over all values of the RHS of the -** IN operator. +** The inFlags parameter must contain, at a minimum, one of the bits +** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP but not both. If inFlags contains +** IN_INDEX_MEMBERSHIP, then the generated table will be used for a fast +** membership test. When the IN_INDEX_LOOP bit is set, the IN index will +** be used to loop over all values of the RHS of the IN operator. ** ** When IN_INDEX_LOOP is used (and the b-tree will be used to iterate ** through the set members) then the b-tree must not contain duplicates. -** An epheremal table must be used unless the selected columns are guaranteed +** An epheremal table will be created unless the selected columns are guaranteed ** to be unique - either because it is an INTEGER PRIMARY KEY or due to ** a UNIQUE constraint or index. ** @@ -93849,7 +98496,8 @@ sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead); eType = IN_INDEX_ROWID; - + ExplainQueryPlan((pParse, 0, + "USING ROWID SEARCH ON TABLE %s FOR IN-OPERATOR",pTab->zName)); sqlite3VdbeJumpHere(v, iAddr); }else{ Index *pIdx; /* Iterator variable */ @@ -93928,11 +98576,8 @@ if( colUsed==(MASKBIT(nExpr)-1) ){ /* If we reach this point, that means the index pIdx is usable */ int iAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); -#ifndef SQLITE_OMIT_EXPLAIN - sqlite3VdbeAddOp4(v, OP_Explain, 0, 0, 0, - sqlite3MPrintf(db, "USING INDEX %s FOR IN-OPERATOR",pIdx->zName), - P4_DYNAMIC); -#endif + ExplainQueryPlan((pParse, 0, + "USING INDEX %s FOR IN-OPERATOR",pIdx->zName)); sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb); sqlite3VdbeSetP4KeyInfo(pParse, pIdx); VdbeComment((v, "%s", pIdx->zName)); @@ -94111,7 +98756,6 @@ int rReg = 0; /* Register storing resulting */ Vdbe *v = sqlite3GetVdbe(pParse); if( NEVER(v==0) ) return 0; - sqlite3ExprCachePush(pParse); /* The evaluation of the IN/EXISTS/SELECT must be repeated every time it ** is encountered if any of the following is true: @@ -94127,17 +98771,6 @@ jmpIfDynamic = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); } -#ifndef SQLITE_OMIT_EXPLAIN - if( pParse->explain==2 ){ - char *zMsg = sqlite3MPrintf(pParse->db, "EXECUTE %s%s SUBQUERY %d", - jmpIfDynamic>=0?"":"CORRELATED ", - pExpr->op==TK_IN?"LIST":"SCALAR", - pParse->iNextSelectId - ); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } -#endif - switch( pExpr->op ){ case TK_IN: { int addr; /* Address of OP_OpenEphemeral instruction */ @@ -94175,6 +98808,9 @@ Select *pSelect = pExpr->x.pSelect; ExprList *pEList = pSelect->pEList; + ExplainQueryPlan((pParse, 1, "%sLIST SUBQUERY", + jmpIfDynamic>=0?"":"CORRELATED " + )); assert( !isRowid ); /* If the LHS and RHS of the IN operator do not match, that ** error will have been caught long before we reach this point. */ @@ -94216,7 +98852,6 @@ ExprList *pList = pExpr->x.pList; struct ExprList_item *pItem; int r1, r2, r3; - affinity = sqlite3ExprAffinity(pLeft); if( !affinity ){ affinity = SQLITE_AFF_BLOB; @@ -94229,7 +98864,7 @@ /* Loop through each expression in . */ r1 = sqlite3GetTempReg(pParse); r2 = sqlite3GetTempReg(pParse); - if( isRowid ) sqlite3VdbeAddOp2(v, OP_Null, 0, r2); + if( isRowid ) sqlite3VdbeAddOp4(v, OP_Blob, 0, r2, 0, "", P4_STATIC); for(i=pList->nExpr, pItem=pList->a; i>0; i--, pItem++){ Expr *pE2 = pItem->pExpr; int iValToIns; @@ -94256,7 +98891,6 @@ sqlite3VdbeAddOp3(v, OP_Insert, pExpr->iTable, r2, r3); }else{ sqlite3VdbeAddOp4(v, OP_MakeRecord, r3, 1, r2, &affinity, 1); - sqlite3ExprCacheAffinityChange(pParse, r3, 1); sqlite3VdbeAddOp4Int(v, OP_IdxInsert, pExpr->iTable, r2, r3, 1); } } @@ -94289,6 +98923,7 @@ Select *pSel; /* SELECT statement to encode */ SelectDest dest; /* How to deal with SELECT result */ int nReg; /* Registers to allocate */ + Expr *pLimit; /* New limit expression */ testcase( pExpr->op==TK_EXISTS ); testcase( pExpr->op==TK_SELECT ); @@ -94296,6 +98931,8 @@ assert( ExprHasProperty(pExpr, EP_xIsSelect) ); pSel = pExpr->x.pSelect; + ExplainQueryPlan((pParse, 1, "%sSCALAR SUBQUERY", + jmpIfDynamic>=0?"":"CORRELATED ")); nReg = pExpr->op==TK_SELECT ? pSel->pEList->nExpr : 1; sqlite3SelectDestInit(&dest, 0, pParse->nMem+1); pParse->nMem += nReg; @@ -94310,11 +98947,14 @@ sqlite3VdbeAddOp2(v, OP_Integer, 0, dest.iSDParm); VdbeComment((v, "Init EXISTS result")); } - sqlite3ExprDelete(pParse->db, pSel->pLimit); - pSel->pLimit = sqlite3ExprAlloc(pParse->db, TK_INTEGER, - &sqlite3IntTokens[1], 0); + pLimit = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[1], 0); + if( pSel->pLimit ){ + sqlite3ExprDelete(pParse->db, pSel->pLimit->pLeft); + pSel->pLimit->pLeft = pLimit; + }else{ + pSel->pLimit = sqlite3PExpr(pParse, TK_LIMIT, pLimit, 0); + } pSel->iLimit = 0; - pSel->selFlags &= ~SF_MultiValue; if( sqlite3Select(pParse, pSel, &dest) ){ return 0; } @@ -94331,7 +98971,6 @@ if( jmpIfDynamic>=0 ){ sqlite3VdbeJumpHere(v, jmpIfDynamic); } - sqlite3ExprCachePop(pParse); return rReg; } @@ -94450,7 +99089,6 @@ ** aiMap[] array contains a mapping from the original LHS field order to ** the field order that matches the RHS index. */ - sqlite3ExprCachePush(pParse); rLhsOrig = exprCodeVector(pParse, pLeft, &iDummy); for(i=0; idb, aiMap); @@ -94657,7 +99294,7 @@ const char *z = pExpr->u.zToken; assert( z!=0 ); c = sqlite3DecOrHexToI64(z, &value); - if( c==1 || (c==2 && !negFlag) || (negFlag && value==SMALLEST_INT64)){ + if( (c==3 && !negFlag) || (c==2) || (negFlag && value==SMALLEST_INT64)){ #ifdef SQLITE_OMIT_FLOATING_POINT sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z); #else @@ -94671,152 +99308,13 @@ } #endif }else{ - if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; } + if( negFlag ){ value = c==3 ? SMALLEST_INT64 : -value; } sqlite3VdbeAddOp4Dup8(v, OP_Int64, 0, iMem, 0, (u8*)&value, P4_INT64); } } } -/* -** Erase column-cache entry number i -*/ -static void cacheEntryClear(Parse *pParse, int i){ - if( pParse->aColCache[i].tempReg ){ - if( pParse->nTempRegaTempReg) ){ - pParse->aTempReg[pParse->nTempReg++] = pParse->aColCache[i].iReg; - } - } - pParse->nColCache--; - if( inColCache ){ - pParse->aColCache[i] = pParse->aColCache[pParse->nColCache]; - } -} - -/* -** Record in the column cache that a particular column from a -** particular table is stored in a particular register. -*/ -SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse *pParse, int iTab, int iCol, int iReg){ - int i; - int minLru; - int idxLru; - struct yColCache *p; - - /* Unless an error has occurred, register numbers are always positive. */ - assert( iReg>0 || pParse->nErr || pParse->db->mallocFailed ); - assert( iCol>=-1 && iCol<32768 ); /* Finite column numbers */ - - /* The SQLITE_ColumnCache flag disables the column cache. This is used - ** for testing only - to verify that SQLite always gets the same answer - ** with and without the column cache. - */ - if( OptimizationDisabled(pParse->db, SQLITE_ColumnCache) ) return; - - /* First replace any existing entry. - ** - ** Actually, the way the column cache is currently used, we are guaranteed - ** that the object will never already be in cache. Verify this guarantee. - */ -#ifndef NDEBUG - for(i=0, p=pParse->aColCache; inColCache; i++, p++){ - assert( p->iTable!=iTab || p->iColumn!=iCol ); - } -#endif - - /* If the cache is already full, delete the least recently used entry */ - if( pParse->nColCache>=SQLITE_N_COLCACHE ){ - minLru = 0x7fffffff; - idxLru = -1; - for(i=0, p=pParse->aColCache; ilrulru; - } - } - p = &pParse->aColCache[idxLru]; - }else{ - p = &pParse->aColCache[pParse->nColCache++]; - } - - /* Add the new entry to the end of the cache */ - p->iLevel = pParse->iCacheLevel; - p->iTable = iTab; - p->iColumn = iCol; - p->iReg = iReg; - p->tempReg = 0; - p->lru = pParse->iCacheCnt++; -} - -/* -** Indicate that registers between iReg..iReg+nReg-1 are being overwritten. -** Purge the range of registers from the column cache. -*/ -SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse *pParse, int iReg, int nReg){ - int i = 0; - while( inColCache ){ - struct yColCache *p = &pParse->aColCache[i]; - if( p->iReg >= iReg && p->iReg < iReg+nReg ){ - cacheEntryClear(pParse, i); - }else{ - i++; - } - } -} - -/* -** Remember the current column cache context. Any new entries added -** added to the column cache after this call are removed when the -** corresponding pop occurs. -*/ -SQLITE_PRIVATE void sqlite3ExprCachePush(Parse *pParse){ - pParse->iCacheLevel++; -#ifdef SQLITE_DEBUG - if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ - printf("PUSH to %d\n", pParse->iCacheLevel); - } -#endif -} - -/* -** Remove from the column cache any entries that were added since the -** the previous sqlite3ExprCachePush operation. In other words, restore -** the cache to the state it was in prior the most recent Push. -*/ -SQLITE_PRIVATE void sqlite3ExprCachePop(Parse *pParse){ - int i = 0; - assert( pParse->iCacheLevel>=1 ); - pParse->iCacheLevel--; -#ifdef SQLITE_DEBUG - if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ - printf("POP to %d\n", pParse->iCacheLevel); - } -#endif - while( inColCache ){ - if( pParse->aColCache[i].iLevel>pParse->iCacheLevel ){ - cacheEntryClear(pParse, i); - }else{ - i++; - } - } -} - -/* -** When a cached column is reused, make sure that its register is -** no longer available as a temp register. ticket #3879: that same -** register might be in the cache in multiple places, so be sure to -** get them all. -*/ -static void sqlite3ExprCachePinRegister(Parse *pParse, int iReg){ - int i; - struct yColCache *p; - for(i=0, p=pParse->aColCache; inColCache; i++, p++){ - if( p->iReg==iReg ){ - p->tempReg = 0; - } - } -} - /* Generate code that will load into register regOut a value that is ** appropriate for the iIdxCol-th column of index pIdx. */ @@ -94871,13 +99369,8 @@ /* ** Generate code that will extract the iColumn-th column from -** table pTab and store the column value in a register. +** table pTab and store the column value in register iReg. ** -** An effort is made to store the column value in register iReg. This -** is not garanteeed for GetColumn() - the result can be stored in -** any register. But the result is guaranteed to land in register iReg -** for GetColumnToReg(). -** ** There must be an open cursor to pTab in iTable when this routine ** is called. If iColumn<0 then code is generated that extracts the rowid. */ @@ -94890,97 +99383,24 @@ u8 p5 /* P5 value for OP_Column + FLAGS */ ){ Vdbe *v = pParse->pVdbe; - int i; - struct yColCache *p; - - for(i=0, p=pParse->aColCache; inColCache; i++, p++){ - if( p->iTable==iTable && p->iColumn==iColumn ){ - p->lru = pParse->iCacheCnt++; - sqlite3ExprCachePinRegister(pParse, p->iReg); - return p->iReg; - } - } assert( v!=0 ); sqlite3ExprCodeGetColumnOfTable(v, pTab, iTable, iColumn, iReg); if( p5 ){ sqlite3VdbeChangeP5(v, p5); - }else{ - sqlite3ExprCacheStore(pParse, iTable, iColumn, iReg); } return iReg; } -SQLITE_PRIVATE void sqlite3ExprCodeGetColumnToReg( - Parse *pParse, /* Parsing and code generating context */ - Table *pTab, /* Description of the table we are reading from */ - int iColumn, /* Index of the table column */ - int iTable, /* The cursor pointing to the table */ - int iReg /* Store results here */ -){ - int r1 = sqlite3ExprCodeGetColumn(pParse, pTab, iColumn, iTable, iReg, 0); - if( r1!=iReg ) sqlite3VdbeAddOp2(pParse->pVdbe, OP_SCopy, r1, iReg); -} - /* -** Clear all column cache entries. -*/ -SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse *pParse){ - int i; - -#ifdef SQLITE_DEBUG - if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ - printf("CLEAR\n"); - } -#endif - for(i=0; inColCache; i++){ - if( pParse->aColCache[i].tempReg - && pParse->nTempRegaTempReg) - ){ - pParse->aTempReg[pParse->nTempReg++] = pParse->aColCache[i].iReg; - } - } - pParse->nColCache = 0; -} - -/* -** Record the fact that an affinity change has occurred on iCount -** registers starting with iStart. -*/ -SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse *pParse, int iStart, int iCount){ - sqlite3ExprCacheRemove(pParse, iStart, iCount); -} - -/* ** Generate code to move content from registers iFrom...iFrom+nReg-1 -** over to iTo..iTo+nReg-1. Keep the column cache up-to-date. +** over to iTo..iTo+nReg-1. */ SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse *pParse, int iFrom, int iTo, int nReg){ assert( iFrom>=iTo+nReg || iFrom+nReg<=iTo ); sqlite3VdbeAddOp3(pParse->pVdbe, OP_Move, iFrom, iTo, nReg); - sqlite3ExprCacheRemove(pParse, iFrom, nReg); } -#if defined(SQLITE_DEBUG) || defined(SQLITE_COVERAGE_TEST) /* -** Return true if any register in the range iFrom..iTo (inclusive) -** is used as part of the column cache. -** -** This routine is used within assert() and testcase() macros only -** and does not appear in a normal build. -*/ -static int usedAsColumnCache(Parse *pParse, int iFrom, int iTo){ - int i; - struct yColCache *p; - for(i=0, p=pParse->aColCache; inColCache; i++, p++){ - int r = p->iReg; - if( r>=iFrom && r<=iTo ) return 1; /*NO_TEST*/ - } - return 0; -} -#endif /* SQLITE_DEBUG || SQLITE_COVERAGE_TEST */ - - -/* ** Convert a scalar expression node to a TK_REGISTER referencing ** register iReg. The caller must ensure that iReg already contains ** the correct value for the expression. @@ -95055,6 +99475,7 @@ return 0; } +expr_code_doover: if( pExpr==0 ){ op = TK_NULL; }else{ @@ -95076,6 +99497,28 @@ } case TK_COLUMN: { int iTab = pExpr->iTable; + if( ExprHasProperty(pExpr, EP_FixedCol) ){ + /* This COLUMN expression is really a constant due to WHERE clause + ** constraints, and that constant is coded by the pExpr->pLeft + ** expresssion. However, make sure the constant has the correct + ** datatype by applying the Affinity of the table column to the + ** constant. + */ + int iReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft,target); + int aff = sqlite3TableColumnAffinity(pExpr->y.pTab, pExpr->iColumn); + if( aff!=SQLITE_AFF_BLOB ){ + static const char zAff[] = "B\000C\000D\000E"; + assert( SQLITE_AFF_BLOB=='A' ); + assert( SQLITE_AFF_TEXT=='B' ); + if( iReg!=target ){ + sqlite3VdbeAddOp2(v, OP_SCopy, iReg, target); + iReg = target; + } + sqlite3VdbeAddOp4(v, OP_Affinity, iReg, 1, 0, + &zAff[(aff-'B')*2], P4_STATIC); + } + return iReg; + } if( iTab<0 ){ if( pParse->iSelfTab<0 ){ /* Generating CHECK constraints or inserting into partial index */ @@ -95086,7 +99529,7 @@ iTab = pParse->iSelfTab - 1; } } - return sqlite3ExprCodeGetColumn(pParse, pExpr->pTab, + return sqlite3ExprCodeGetColumn(pParse, pExpr->y.pTab, pExpr->iColumn, iTab, target, pExpr->op2); } @@ -95094,6 +99537,10 @@ codeInteger(pParse, pExpr, 0, target); return target; } + case TK_TRUEFALSE: { + sqlite3VdbeAddOp2(v, OP_Integer, sqlite3ExprTruthValue(pExpr), target); + return target; + } #ifndef SQLITE_OMIT_FLOATING_POINT case TK_FLOAT: { assert( !ExprHasProperty(pExpr, EP_IntValue) ); @@ -95152,8 +99599,6 @@ } sqlite3VdbeAddOp2(v, OP_Cast, target, sqlite3AffinityType(pExpr->u.zToken, 0)); - testcase( usedAsColumnCache(pParse, inReg, inReg) ); - sqlite3ExprCacheAffinityChange(pParse, inReg, 1); return inReg; } #endif /* SQLITE_OMIT_CAST */ @@ -95249,6 +99694,18 @@ sqlite3VdbeAddOp2(v, op, r1, inReg); break; } + case TK_TRUTH: { + int isTrue; /* IS TRUE or IS NOT TRUE */ + int bNormal; /* IS TRUE or IS FALSE */ + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + testcase( regFree1==0 ); + isTrue = sqlite3ExprTruthValue(pExpr->pRight); + bNormal = pExpr->op2==TK_IS; + testcase( isTrue && bNormal); + testcase( !isTrue && bNormal); + sqlite3VdbeAddOp4Int(v, OP_IsTrue, r1, inReg, !isTrue, isTrue ^ bNormal); + break; + } case TK_ISNULL: case TK_NOTNULL: { int addr; @@ -95285,6 +99742,12 @@ u8 enc = ENC(db); /* The text encoding used by this database */ CollSeq *pColl = 0; /* A collating sequence */ +#ifndef SQLITE_OMIT_WINDOWFUNC + if( ExprHasProperty(pExpr, EP_WinFunc) ){ + return pExpr->y.pWin->regResult; + } +#endif + if( ConstFactorOk(pParse) && sqlite3ExprIsConstantNotJoin(pExpr) ){ /* SQL functions can be expensive. So try to move constant functions ** out of the inner loop, even if that means an extra OP_Copy. */ @@ -95321,10 +99784,7 @@ for(i=1; ia[i].pExpr, target); - sqlite3ExprCachePop(pParse); } sqlite3VdbeResolveLabel(v, endCoalesce); break; @@ -95390,10 +99850,8 @@ } } - sqlite3ExprCachePush(pParse); /* Ticket 2ea2425d34be */ sqlite3ExprCodeExprList(pParse, pFarg, r1, 0, SQLITE_ECEL_DUP|SQLITE_ECEL_FACTOR); - sqlite3ExprCachePop(pParse); /* Ticket 2ea2425d34be */ }else{ r1 = 0; } @@ -95410,7 +99868,7 @@ ** "glob(B,A). We want to use the A in "A glob B" to test ** for function overloading. But we use the B term in "glob(B,A)". */ - if( nFarg>=2 && (pExpr->flags & EP_InfixFunc) ){ + if( nFarg>=2 && ExprHasProperty(pExpr, EP_InfixFunc) ){ pDef = sqlite3VtabOverloadFunction(db, pDef, nFarg, pFarg->a[1].pExpr); }else if( nFarg>0 ){ pDef = sqlite3VtabOverloadFunction(db, pDef, nFarg, pFarg->a[0].pExpr); @@ -95420,9 +99878,21 @@ if( !pColl ) pColl = db->pDfltColl; sqlite3VdbeAddOp4(v, OP_CollSeq, 0, 0, 0, (char *)pColl, P4_COLLSEQ); } - sqlite3VdbeAddOp4(v, pParse->iSelfTab ? OP_PureFunc0 : OP_Function0, - constMask, r1, target, (char*)pDef, P4_FUNCDEF); - sqlite3VdbeChangeP5(v, (u8)nFarg); +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC + if( pDef->funcFlags & SQLITE_FUNC_OFFSET ){ + Expr *pArg = pFarg->a[0].pExpr; + if( pArg->op==TK_COLUMN ){ + sqlite3VdbeAddOp3(v, OP_Offset, pArg->iTable, pArg->iColumn, target); + }else{ + sqlite3VdbeAddOp2(v, OP_Null, 0, target); + } + }else +#endif + { + sqlite3VdbeAddOp4(v, pParse->iSelfTab ? OP_PureFunc0 : OP_Function0, + constMask, r1, target, (char*)pDef, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, (u8)nFarg); + } if( nFarg && constMask==0 ){ sqlite3ReleaseTempRange(pParse, r1, nFarg); } @@ -95487,7 +99957,8 @@ case TK_SPAN: case TK_COLLATE: case TK_UPLUS: { - return sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); + pExpr = pExpr->pLeft; + goto expr_code_doover; /* 2018-04-28: Prevent deep recursion. OSSFuzz. */ } case TK_TRIGGER: { @@ -95516,7 +99987,7 @@ ** p1==1 -> old.a p1==4 -> new.a ** p1==2 -> old.b p1==5 -> new.b */ - Table *pTab = pExpr->pTab; + Table *pTab = pExpr->y.pTab; int p1 = pExpr->iTable * (pTab->nCol+1) + 1 + pExpr->iColumn; assert( pExpr->iTable==0 || pExpr->iTable==1 ); @@ -95525,10 +99996,9 @@ assert( p1>=0 && p1<(pTab->nCol*2+2) ); sqlite3VdbeAddOp2(v, OP_Param, p1, target); - VdbeComment((v, "%s.%s -> $%d", + VdbeComment((v, "r[%d]=%s.%s", target, (pExpr->iTable ? "new" : "old"), - (pExpr->iColumn<0 ? "rowid" : pExpr->pTab->aCol[pExpr->iColumn].zName), - target + (pExpr->iColumn<0 ? "rowid" : pExpr->y.pTab->aCol[pExpr->iColumn].zName) )); #ifndef SQLITE_OMIT_FLOATING_POINT @@ -95554,9 +100024,7 @@ case TK_IF_NULL_ROW: { int addrINR; addrINR = sqlite3VdbeAddOp1(v, OP_IfNullRow, pExpr->iTable); - sqlite3ExprCachePush(pParse); inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); - sqlite3ExprCachePop(pParse); sqlite3VdbeJumpHere(v, addrINR); sqlite3VdbeChangeP3(v, addrINR, inReg); break; @@ -95593,7 +100061,6 @@ Expr opCompare; /* The X==Ei expression */ Expr *pX; /* The X expression */ Expr *pTest = 0; /* X==Ei (form A) or just Ei (form B) */ - VVA_ONLY( int iCacheLevel = pParse->iCacheLevel; ) assert( !ExprHasProperty(pExpr, EP_xIsSelect) && pExpr->x.pList ); assert(pExpr->x.pList->nExpr > 0); @@ -95617,7 +100084,6 @@ regFree1 = 0; } for(i=0; iop==TK_COLUMN ); sqlite3ExprCode(pParse, aListelem[i+1].pExpr, target); sqlite3VdbeGoto(v, endLabel); - sqlite3ExprCachePop(pParse); sqlite3VdbeResolveLabel(v, nextCase); } if( (nExpr&1)!=0 ){ - sqlite3ExprCachePush(pParse); sqlite3ExprCode(pParse, pEList->a[nExpr-1].pExpr, target); - sqlite3ExprCachePop(pParse); }else{ sqlite3VdbeAddOp2(v, OP_Null, 0, target); } - assert( pParse->db->mallocFailed || pParse->nErr>0 - || pParse->iCacheLevel==iCacheLevel ); sqlite3VdbeResolveLabel(v, endLabel); break; } @@ -95791,7 +100252,7 @@ ** might choose to code the expression at initialization time. */ SQLITE_PRIVATE void sqlite3ExprCodeFactorable(Parse *pParse, Expr *pExpr, int target){ - if( pParse->okConstFactor && sqlite3ExprIsConstant(pExpr) ){ + if( pParse->okConstFactor && sqlite3ExprIsConstantNotJoin(pExpr) ){ sqlite3ExprCodeAtInit(pParse, pExpr, target); }else{ sqlite3ExprCode(pParse, pExpr, target); @@ -95826,7 +100287,9 @@ ** Generate code that pushes the value of every element of the given ** expression list into a sequence of registers beginning at target. ** -** Return the number of elements evaluated. +** Return the number of elements evaluated. The number returned will +** usually be pList->nExpr but might be reduced if SQLITE_ECEL_OMITREF +** is defined. ** ** The SQLITE_ECEL_DUP flag prevents the arguments from being ** filled using OP_SCopy. OP_Copy must be used instead. @@ -95837,6 +100300,8 @@ ** The SQLITE_ECEL_REF flag means that expressions in the list with ** ExprList.a[].u.x.iOrderByCol>0 have already been evaluated and stored ** in registers at srcReg, and so the value can be copied from there. +** If SQLITE_ECEL_OMITREF is also set, then the values with u.x.iOrderByCol>0 +** are simply omitted rather than being copied from srcReg. */ SQLITE_PRIVATE int sqlite3ExprCodeExprList( Parse *pParse, /* Parsing context */ @@ -95856,6 +100321,12 @@ if( !ConstFactorOk(pParse) ) flags &= ~SQLITE_ECEL_FACTOR; for(pItem=pList->a, i=0; ipExpr; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( pItem->bSorterRef ){ + i--; + n--; + }else +#endif if( (flags & SQLITE_ECEL_REF)!=0 && (j = pItem->u.x.iOrderByCol)>0 ){ if( flags & SQLITE_ECEL_OMITREF ){ i--; @@ -95863,7 +100334,9 @@ }else{ sqlite3VdbeAddOp2(v, copyOp, j+srcReg-1, target+i); } - }else if( (flags & SQLITE_ECEL_FACTOR)!=0 && sqlite3ExprIsConstant(pExpr) ){ + }else if( (flags & SQLITE_ECEL_FACTOR)!=0 + && sqlite3ExprIsConstantNotJoin(pExpr) + ){ sqlite3ExprCodeAtInit(pParse, pExpr, target+i); }else{ int inReg = sqlite3ExprCodeTarget(pParse, pExpr, target+i); @@ -95989,18 +100462,14 @@ int d2 = sqlite3VdbeMakeLabel(v); testcase( jumpIfNull==0 ); sqlite3ExprIfFalse(pParse, pExpr->pLeft, d2,jumpIfNull^SQLITE_JUMPIFNULL); - sqlite3ExprCachePush(pParse); sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); sqlite3VdbeResolveLabel(v, d2); - sqlite3ExprCachePop(pParse); break; } case TK_OR: { testcase( jumpIfNull==0 ); sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); - sqlite3ExprCachePush(pParse); sqlite3ExprIfTrue(pParse, pExpr->pRight, dest, jumpIfNull); - sqlite3ExprCachePop(pParse); break; } case TK_NOT: { @@ -96008,6 +100477,23 @@ sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); break; } + case TK_TRUTH: { + int isNot; /* IS NOT TRUE or IS NOT FALSE */ + int isTrue; /* IS TRUE or IS NOT TRUE */ + testcase( jumpIfNull==0 ); + isNot = pExpr->op2==TK_ISNOT; + isTrue = sqlite3ExprTruthValue(pExpr->pRight); + testcase( isTrue && isNot ); + testcase( !isTrue && isNot ); + if( isTrue ^ isNot ){ + sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, + isNot ? SQLITE_JUMPIFNULL : 0); + }else{ + sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, + isNot ? SQLITE_JUMPIFNULL : 0); + } + break; + } case TK_IS: case TK_ISNOT: testcase( op==TK_IS ); @@ -96142,9 +100628,7 @@ case TK_AND: { testcase( jumpIfNull==0 ); sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); - sqlite3ExprCachePush(pParse); sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); - sqlite3ExprCachePop(pParse); break; } case TK_OR: { @@ -96151,10 +100635,8 @@ int d2 = sqlite3VdbeMakeLabel(v); testcase( jumpIfNull==0 ); sqlite3ExprIfTrue(pParse, pExpr->pLeft, d2, jumpIfNull^SQLITE_JUMPIFNULL); - sqlite3ExprCachePush(pParse); sqlite3ExprIfFalse(pParse, pExpr->pRight, dest, jumpIfNull); sqlite3VdbeResolveLabel(v, d2); - sqlite3ExprCachePop(pParse); break; } case TK_NOT: { @@ -96162,6 +100644,26 @@ sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); break; } + case TK_TRUTH: { + int isNot; /* IS NOT TRUE or IS NOT FALSE */ + int isTrue; /* IS TRUE or IS NOT TRUE */ + testcase( jumpIfNull==0 ); + isNot = pExpr->op2==TK_ISNOT; + isTrue = sqlite3ExprTruthValue(pExpr->pRight); + testcase( isTrue && isNot ); + testcase( !isTrue && isNot ); + if( isTrue ^ isNot ){ + /* IS TRUE and IS NOT FALSE */ + sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, + isNot ? 0 : SQLITE_JUMPIFNULL); + + }else{ + /* IS FALSE and IS NOT TRUE */ + sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, + isNot ? 0 : SQLITE_JUMPIFNULL); + } + break; + } case TK_IS: case TK_ISNOT: testcase( pExpr->op==TK_IS ); @@ -96347,17 +100849,35 @@ if( pA->op!=TK_COLUMN && pA->op!=TK_AGG_COLUMN && pA->u.zToken ){ if( pA->op==TK_FUNCTION ){ if( sqlite3StrICmp(pA->u.zToken,pB->u.zToken)!=0 ) return 2; +#ifndef SQLITE_OMIT_WINDOWFUNC + /* Justification for the assert(): + ** window functions have p->op==TK_FUNCTION but aggregate functions + ** have p->op==TK_AGG_FUNCTION. So any comparison between an aggregate + ** function and a window function should have failed before reaching + ** this point. And, it is not possible to have a window function and + ** a scalar function with the same name and number of arguments. So + ** if we reach this point, either A and B both window functions or + ** neither are a window functions. */ + assert( ExprHasProperty(pA,EP_WinFunc)==ExprHasProperty(pB,EP_WinFunc) ); + if( ExprHasProperty(pA,EP_WinFunc) ){ + if( sqlite3WindowCompare(pParse,pA->y.pWin,pB->y.pWin)!=0 ) return 2; + } +#endif + }else if( pA->op==TK_COLLATE ){ + if( sqlite3_stricmp(pA->u.zToken,pB->u.zToken)!=0 ) return 2; }else if( strcmp(pA->u.zToken,pB->u.zToken)!=0 ){ - return pA->op==TK_COLLATE ? 1 : 2; + return 2; } } if( (pA->flags & EP_Distinct)!=(pB->flags & EP_Distinct) ) return 2; if( ALWAYS((combinedFlags & EP_TokenOnly)==0) ){ if( combinedFlags & EP_xIsSelect ) return 2; - if( sqlite3ExprCompare(pParse, pA->pLeft, pB->pLeft, iTab) ) return 2; + if( (combinedFlags & EP_FixedCol)==0 + && sqlite3ExprCompare(pParse, pA->pLeft, pB->pLeft, iTab) ) return 2; if( sqlite3ExprCompare(pParse, pA->pRight, pB->pRight, iTab) ) return 2; if( sqlite3ExprListCompare(pA->x.pList, pB->x.pList, iTab) ) return 2; - if( ALWAYS((combinedFlags & EP_Reduced)==0) && pA->op!=TK_STRING ){ + assert( (combinedFlags & EP_Reduced)==0 ); + if( pA->op!=TK_STRING && pA->op!=TK_TRUEFALSE ){ if( pA->iColumn!=pB->iColumn ) return 2; if( pA->iTable!=pB->iTable && (pA->iTable!=iTab || NEVER(pB->iTable>=0)) ) return 2; @@ -96450,6 +100970,102 @@ } /* +** This is the Expr node callback for sqlite3ExprImpliesNotNullRow(). +** If the expression node requires that the table at pWalker->iCur +** have one or more non-NULL column, then set pWalker->eCode to 1 and abort. +** +** This routine controls an optimization. False positives (setting +** pWalker->eCode to 1 when it should not be) are deadly, but false-negatives +** (never setting pWalker->eCode) is a harmless missed optimization. +*/ +static int impliesNotNullRow(Walker *pWalker, Expr *pExpr){ + testcase( pExpr->op==TK_AGG_COLUMN ); + testcase( pExpr->op==TK_AGG_FUNCTION ); + if( ExprHasProperty(pExpr, EP_FromJoin) ) return WRC_Prune; + switch( pExpr->op ){ + case TK_ISNOT: + case TK_NOT: + case TK_ISNULL: + case TK_IS: + case TK_OR: + case TK_CASE: + case TK_IN: + case TK_FUNCTION: + testcase( pExpr->op==TK_ISNOT ); + testcase( pExpr->op==TK_NOT ); + testcase( pExpr->op==TK_ISNULL ); + testcase( pExpr->op==TK_IS ); + testcase( pExpr->op==TK_OR ); + testcase( pExpr->op==TK_CASE ); + testcase( pExpr->op==TK_IN ); + testcase( pExpr->op==TK_FUNCTION ); + return WRC_Prune; + case TK_COLUMN: + if( pWalker->u.iCur==pExpr->iTable ){ + pWalker->eCode = 1; + return WRC_Abort; + } + return WRC_Prune; + + /* Virtual tables are allowed to use constraints like x=NULL. So + ** a term of the form x=y does not prove that y is not null if x + ** is the column of a virtual table */ + case TK_EQ: + case TK_NE: + case TK_LT: + case TK_LE: + case TK_GT: + case TK_GE: + testcase( pExpr->op==TK_EQ ); + testcase( pExpr->op==TK_NE ); + testcase( pExpr->op==TK_LT ); + testcase( pExpr->op==TK_LE ); + testcase( pExpr->op==TK_GT ); + testcase( pExpr->op==TK_GE ); + if( (pExpr->pLeft->op==TK_COLUMN && IsVirtual(pExpr->pLeft->y.pTab)) + || (pExpr->pRight->op==TK_COLUMN && IsVirtual(pExpr->pRight->y.pTab)) + ){ + return WRC_Prune; + } + default: + return WRC_Continue; + } +} + +/* +** Return true (non-zero) if expression p can only be true if at least +** one column of table iTab is non-null. In other words, return true +** if expression p will always be NULL or false if every column of iTab +** is NULL. +** +** False negatives are acceptable. In other words, it is ok to return +** zero even if expression p will never be true of every column of iTab +** is NULL. A false negative is merely a missed optimization opportunity. +** +** False positives are not allowed, however. A false positive may result +** in an incorrect answer. +** +** Terms of p that are marked with EP_FromJoin (and hence that come from +** the ON or USING clauses of LEFT JOINS) are excluded from the analysis. +** +** This routine is used to check if a LEFT JOIN can be converted into +** an ordinary JOIN. The p argument is the WHERE clause. If the WHERE +** clause requires that some column of the right table of the LEFT JOIN +** be non-NULL, then the LEFT JOIN can be safely converted into an +** ordinary join. +*/ +SQLITE_PRIVATE int sqlite3ExprImpliesNonNullRow(Expr *p, int iTab){ + Walker w; + w.xExprCallback = impliesNotNullRow; + w.xSelectCallback = 0; + w.xSelectCallback2 = 0; + w.eCode = 0; + w.u.iCur = iTab; + sqlite3WalkExpr(&w, p); + return w.eCode; +} + +/* ** An instance of the following structure is used by the tree walker ** to determine if an expression can be evaluated by reference to the ** index only, without having to do a search for the corresponding @@ -96604,8 +101220,9 @@ NameContext *pNC = pWalker->u.pNC; Parse *pParse = pNC->pParse; SrcList *pSrcList = pNC->pSrcList; - AggInfo *pAggInfo = pNC->pAggInfo; + AggInfo *pAggInfo = pNC->uNC.pAggInfo; + assert( pNC->ncFlags & NC_UAggInfo ); switch( pExpr->op ){ case TK_AGG_COLUMN: case TK_COLUMN: { @@ -96637,7 +101254,7 @@ && (k = addAggInfoColumn(pParse->db, pAggInfo))>=0 ){ pCol = &pAggInfo->aCol[k]; - pCol->pTab = pExpr->pTab; + pCol->pTab = pExpr->y.pTab; pCol->iTable = pExpr->iTable; pCol->iColumn = pExpr->iColumn; pCol->iMem = ++pParse->nMem; @@ -96783,21 +101400,9 @@ /* ** Deallocate a register, making available for reuse for some other ** purpose. -** -** If a register is currently being used by the column cache, then -** the deallocation is deferred until the column cache line that uses -** the register becomes stale. */ SQLITE_PRIVATE void sqlite3ReleaseTempReg(Parse *pParse, int iReg){ if( iReg && pParse->nTempRegaTempReg) ){ - int i; - struct yColCache *p; - for(i=0, p=pParse->aColCache; inColCache; i++, p++){ - if( p->iReg==iReg ){ - p->tempReg = 1; - return; - } - } pParse->aTempReg[pParse->nTempReg++] = iReg; } } @@ -96811,7 +101416,6 @@ i = pParse->iRangeReg; n = pParse->nRangeReg; if( nReg<=n ){ - assert( !usedAsColumnCache(pParse, i, i+n-1) ); pParse->iRangeReg += nReg; pParse->nRangeReg -= nReg; }else{ @@ -96825,7 +101429,6 @@ sqlite3ReleaseTempReg(pParse, iReg); return; } - sqlite3ExprCacheRemove(pParse, iReg, nReg); if( nReg>pParse->nRangeReg ){ pParse->nRangeReg = nReg; pParse->iRangeReg = iReg; @@ -96887,369 +101490,66 @@ */ #ifndef SQLITE_OMIT_ALTERTABLE - /* -** This function is used by SQL generated to implement the -** ALTER TABLE command. The first argument is the text of a CREATE TABLE or -** CREATE INDEX command. The second is a table name. The table name in -** the CREATE TABLE or CREATE INDEX statement is replaced with the third -** argument and the result returned. Examples: +** Parameter zName is the name of a table that is about to be altered +** (either with ALTER TABLE ... RENAME TO or ALTER TABLE ... ADD COLUMN). +** If the table is a system table, this function leaves an error message +** in pParse->zErr (system tables may not be altered) and returns non-zero. ** -** sqlite_rename_table('CREATE TABLE abc(a, b, c)', 'def') -** -> 'CREATE TABLE def(a, b, c)' -** -** sqlite_rename_table('CREATE INDEX i ON abc(a)', 'def') -** -> 'CREATE INDEX i ON def(a, b, c)' +** Or, if zName is not a system table, zero is returned. */ -static void renameTableFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - unsigned char const *zSql = sqlite3_value_text(argv[0]); - unsigned char const *zTableName = sqlite3_value_text(argv[1]); - - int token; - Token tname; - unsigned char const *zCsr = zSql; - int len = 0; - char *zRet; - - sqlite3 *db = sqlite3_context_db_handle(context); - - UNUSED_PARAMETER(NotUsed); - - /* The principle used to locate the table name in the CREATE TABLE - ** statement is that the table name is the first non-space token that - ** is immediately followed by a TK_LP or TK_USING token. - */ - if( zSql ){ - do { - if( !*zCsr ){ - /* Ran out of input before finding an opening bracket. Return NULL. */ - return; - } - - /* Store the token that zCsr points to in tname. */ - tname.z = (char*)zCsr; - tname.n = len; - - /* Advance zCsr to the next token. Store that token type in 'token', - ** and its length in 'len' (to be used next iteration of this loop). - */ - do { - zCsr += len; - len = sqlite3GetToken(zCsr, &token); - } while( token==TK_SPACE ); - assert( len>0 ); - } while( token!=TK_LP && token!=TK_USING ); - - zRet = sqlite3MPrintf(db, "%.*s\"%w\"%s", (int)(((u8*)tname.z) - zSql), - zSql, zTableName, tname.z+tname.n); - sqlite3_result_text(context, zRet, -1, SQLITE_DYNAMIC); +static int isSystemTable(Parse *pParse, const char *zName){ + if( 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ + sqlite3ErrorMsg(pParse, "table %s may not be altered", zName); + return 1; } + return 0; } /* -** This C function implements an SQL user function that is used by SQL code -** generated by the ALTER TABLE ... RENAME command to modify the definition -** of any foreign key constraints that use the table being renamed as the -** parent table. It is passed three arguments: -** -** 1) The complete text of the CREATE TABLE statement being modified, -** 2) The old name of the table being renamed, and -** 3) The new name of the table being renamed. -** -** It returns the new CREATE TABLE statement. For example: -** -** sqlite_rename_parent('CREATE TABLE t1(a REFERENCES t2)', 't2', 't3') -** -> 'CREATE TABLE t1(a REFERENCES t3)' +** Generate code to verify that the schemas of database zDb and, if +** bTemp is not true, database "temp", can still be parsed. This is +** called at the end of the generation of an ALTER TABLE ... RENAME ... +** statement to ensure that the operation has not rendered any schema +** objects unusable. */ -#ifndef SQLITE_OMIT_FOREIGN_KEY -static void renameParentFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - sqlite3 *db = sqlite3_context_db_handle(context); - char *zOutput = 0; - char *zResult; - unsigned char const *zInput = sqlite3_value_text(argv[0]); - unsigned char const *zOld = sqlite3_value_text(argv[1]); - unsigned char const *zNew = sqlite3_value_text(argv[2]); +static void renameTestSchema(Parse *pParse, const char *zDb, int bTemp){ + sqlite3NestedParse(pParse, + "SELECT 1 " + "FROM \"%w\".%s " + "WHERE name NOT LIKE 'sqlite_%%'" + " AND sql NOT LIKE 'create virtual%%'" + " AND sqlite_rename_test(%Q, sql, type, name, %d)=NULL ", + zDb, MASTER_NAME, + zDb, bTemp + ); - unsigned const char *z; /* Pointer to token */ - int n; /* Length of token z */ - int token; /* Type of token */ - - UNUSED_PARAMETER(NotUsed); - if( zInput==0 || zOld==0 ) return; - for(z=zInput; *z; z=z+n){ - n = sqlite3GetToken(z, &token); - if( token==TK_REFERENCES ){ - char *zParent; - do { - z += n; - n = sqlite3GetToken(z, &token); - }while( token==TK_SPACE ); - - if( token==TK_ILLEGAL ) break; - zParent = sqlite3DbStrNDup(db, (const char *)z, n); - if( zParent==0 ) break; - sqlite3Dequote(zParent); - if( 0==sqlite3StrICmp((const char *)zOld, zParent) ){ - char *zOut = sqlite3MPrintf(db, "%s%.*s\"%w\"", - (zOutput?zOutput:""), (int)(z-zInput), zInput, (const char *)zNew - ); - sqlite3DbFree(db, zOutput); - zOutput = zOut; - zInput = &z[n]; - } - sqlite3DbFree(db, zParent); - } + if( bTemp==0 ){ + sqlite3NestedParse(pParse, + "SELECT 1 " + "FROM temp.%s " + "WHERE name NOT LIKE 'sqlite_%%'" + " AND sql NOT LIKE 'create virtual%%'" + " AND sqlite_rename_test(%Q, sql, type, name, 1)=NULL ", + MASTER_NAME, zDb + ); } - - zResult = sqlite3MPrintf(db, "%s%s", (zOutput?zOutput:""), zInput), - sqlite3_result_text(context, zResult, -1, SQLITE_DYNAMIC); - sqlite3DbFree(db, zOutput); } -#endif -#ifndef SQLITE_OMIT_TRIGGER -/* This function is used by SQL generated to implement the -** ALTER TABLE command. The first argument is the text of a CREATE TRIGGER -** statement. The second is a table name. The table name in the CREATE -** TRIGGER statement is replaced with the third argument and the result -** returned. This is analagous to renameTableFunc() above, except for CREATE -** TRIGGER, not CREATE INDEX and CREATE TABLE. -*/ -static void renameTriggerFunc( - sqlite3_context *context, - int NotUsed, - sqlite3_value **argv -){ - unsigned char const *zSql = sqlite3_value_text(argv[0]); - unsigned char const *zTableName = sqlite3_value_text(argv[1]); - - int token; - Token tname; - int dist = 3; - unsigned char const *zCsr = zSql; - int len = 0; - char *zRet; - sqlite3 *db = sqlite3_context_db_handle(context); - - UNUSED_PARAMETER(NotUsed); - - /* The principle used to locate the table name in the CREATE TRIGGER - ** statement is that the table name is the first token that is immediately - ** preceded by either TK_ON or TK_DOT and immediately followed by one - ** of TK_WHEN, TK_BEGIN or TK_FOR. - */ - if( zSql ){ - do { - - if( !*zCsr ){ - /* Ran out of input before finding the table name. Return NULL. */ - return; - } - - /* Store the token that zCsr points to in tname. */ - tname.z = (char*)zCsr; - tname.n = len; - - /* Advance zCsr to the next token. Store that token type in 'token', - ** and its length in 'len' (to be used next iteration of this loop). - */ - do { - zCsr += len; - len = sqlite3GetToken(zCsr, &token); - }while( token==TK_SPACE ); - assert( len>0 ); - - /* Variable 'dist' stores the number of tokens read since the most - ** recent TK_DOT or TK_ON. This means that when a WHEN, FOR or BEGIN - ** token is read and 'dist' equals 2, the condition stated above - ** to be met. - ** - ** Note that ON cannot be a database, table or column name, so - ** there is no need to worry about syntax like - ** "CREATE TRIGGER ... ON ON.ON BEGIN ..." etc. - */ - dist++; - if( token==TK_DOT || token==TK_ON ){ - dist = 0; - } - } while( dist!=2 || (token!=TK_WHEN && token!=TK_FOR && token!=TK_BEGIN) ); - - /* Variable tname now contains the token that is the old table-name - ** in the CREATE TRIGGER statement. - */ - zRet = sqlite3MPrintf(db, "%.*s\"%w\"%s", (int)(((u8*)tname.z) - zSql), - zSql, zTableName, tname.z+tname.n); - sqlite3_result_text(context, zRet, -1, SQLITE_DYNAMIC); - } -} -#endif /* !SQLITE_OMIT_TRIGGER */ - /* -** Register built-in functions used to help implement ALTER TABLE +** Generate code to reload the schema for database iDb. And, if iDb!=1, for +** the temp database as well. */ -SQLITE_PRIVATE void sqlite3AlterFunctions(void){ - static FuncDef aAlterTableFuncs[] = { - FUNCTION(sqlite_rename_table, 2, 0, 0, renameTableFunc), -#ifndef SQLITE_OMIT_TRIGGER - FUNCTION(sqlite_rename_trigger, 2, 0, 0, renameTriggerFunc), -#endif -#ifndef SQLITE_OMIT_FOREIGN_KEY - FUNCTION(sqlite_rename_parent, 3, 0, 0, renameParentFunc), -#endif - }; - sqlite3InsertBuiltinFuncs(aAlterTableFuncs, ArraySize(aAlterTableFuncs)); -} - -/* -** This function is used to create the text of expressions of the form: -** -** name= OR name= OR ... -** -** If argument zWhere is NULL, then a pointer string containing the text -** "name=" is returned, where is the quoted version -** of the string passed as argument zConstant. The returned buffer is -** allocated using sqlite3DbMalloc(). It is the responsibility of the -** caller to ensure that it is eventually freed. -** -** If argument zWhere is not NULL, then the string returned is -** " OR name=", where is the contents of zWhere. -** In this case zWhere is passed to sqlite3DbFree() before returning. -** -*/ -static char *whereOrName(sqlite3 *db, char *zWhere, char *zConstant){ - char *zNew; - if( !zWhere ){ - zNew = sqlite3MPrintf(db, "name=%Q", zConstant); - }else{ - zNew = sqlite3MPrintf(db, "%s OR name=%Q", zWhere, zConstant); - sqlite3DbFree(db, zWhere); +static void renameReloadSchema(Parse *pParse, int iDb){ + Vdbe *v = pParse->pVdbe; + if( v ){ + sqlite3ChangeCookie(pParse, iDb); + sqlite3VdbeAddParseSchemaOp(pParse->pVdbe, iDb, 0); + if( iDb!=1 ) sqlite3VdbeAddParseSchemaOp(pParse->pVdbe, 1, 0); } - return zNew; } -#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) /* -** Generate the text of a WHERE expression which can be used to select all -** tables that have foreign key constraints that refer to table pTab (i.e. -** constraints for which pTab is the parent table) from the sqlite_master -** table. -*/ -static char *whereForeignKeys(Parse *pParse, Table *pTab){ - FKey *p; - char *zWhere = 0; - for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ - zWhere = whereOrName(pParse->db, zWhere, p->pFrom->zName); - } - return zWhere; -} -#endif - -/* -** Generate the text of a WHERE expression which can be used to select all -** temporary triggers on table pTab from the sqlite_temp_master table. If -** table pTab has no temporary triggers, or is itself stored in the -** temporary database, NULL is returned. -*/ -static char *whereTempTriggers(Parse *pParse, Table *pTab){ - Trigger *pTrig; - char *zWhere = 0; - const Schema *pTempSchema = pParse->db->aDb[1].pSchema; /* Temp db schema */ - - /* If the table is not located in the temp-db (in which case NULL is - ** returned, loop through the tables list of triggers. For each trigger - ** that is not part of the temp-db schema, add a clause to the WHERE - ** expression being built up in zWhere. - */ - if( pTab->pSchema!=pTempSchema ){ - sqlite3 *db = pParse->db; - for(pTrig=sqlite3TriggerList(pParse, pTab); pTrig; pTrig=pTrig->pNext){ - if( pTrig->pSchema==pTempSchema ){ - zWhere = whereOrName(db, zWhere, pTrig->zName); - } - } - } - if( zWhere ){ - char *zNew = sqlite3MPrintf(pParse->db, "type='trigger' AND (%s)", zWhere); - sqlite3DbFree(pParse->db, zWhere); - zWhere = zNew; - } - return zWhere; -} - -/* -** Generate code to drop and reload the internal representation of table -** pTab from the database, including triggers and temporary triggers. -** Argument zName is the name of the table in the database schema at -** the time the generated code is executed. This can be different from -** pTab->zName if this function is being called to code part of an -** "ALTER TABLE RENAME TO" statement. -*/ -static void reloadTableSchema(Parse *pParse, Table *pTab, const char *zName){ - Vdbe *v; - char *zWhere; - int iDb; /* Index of database containing pTab */ -#ifndef SQLITE_OMIT_TRIGGER - Trigger *pTrig; -#endif - - v = sqlite3GetVdbe(pParse); - if( NEVER(v==0) ) return; - assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); - iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - assert( iDb>=0 ); - -#ifndef SQLITE_OMIT_TRIGGER - /* Drop any table triggers from the internal schema. */ - for(pTrig=sqlite3TriggerList(pParse, pTab); pTrig; pTrig=pTrig->pNext){ - int iTrigDb = sqlite3SchemaToIndex(pParse->db, pTrig->pSchema); - assert( iTrigDb==iDb || iTrigDb==1 ); - sqlite3VdbeAddOp4(v, OP_DropTrigger, iTrigDb, 0, 0, pTrig->zName, 0); - } -#endif - - /* Drop the table and index from the internal schema. */ - sqlite3VdbeAddOp4(v, OP_DropTable, iDb, 0, 0, pTab->zName, 0); - - /* Reload the table, index and permanent trigger schemas. */ - zWhere = sqlite3MPrintf(pParse->db, "tbl_name=%Q", zName); - if( !zWhere ) return; - sqlite3VdbeAddParseSchemaOp(v, iDb, zWhere); - -#ifndef SQLITE_OMIT_TRIGGER - /* Now, if the table is not stored in the temp database, reload any temp - ** triggers. Don't use IN(...) in case SQLITE_OMIT_SUBQUERY is defined. - */ - if( (zWhere=whereTempTriggers(pParse, pTab))!=0 ){ - sqlite3VdbeAddParseSchemaOp(v, 1, zWhere); - } -#endif -} - -/* -** Parameter zName is the name of a table that is about to be altered -** (either with ALTER TABLE ... RENAME TO or ALTER TABLE ... ADD COLUMN). -** If the table is a system table, this function leaves an error message -** in pParse->zErr (system tables may not be altered) and returns non-zero. -** -** Or, if zName is not a system table, zero is returned. -*/ -static int isSystemTable(Parse *pParse, const char *zName){ - if( 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ - sqlite3ErrorMsg(pParse, "table %s may not be altered", zName); - return 1; - } - return 0; -} - -/* ** Generate code to implement the "ALTER TABLE xxx RENAME TO yyy" ** command. */ @@ -97266,13 +101566,10 @@ int nTabName; /* Number of UTF-8 characters in zTabName */ const char *zTabName; /* Original name of the table */ Vdbe *v; -#ifndef SQLITE_OMIT_TRIGGER - char *zWhere = 0; /* Where clause to locate temp triggers */ -#endif VTable *pVTab = 0; /* Non-zero if this is a v-tab with an xRename() */ - int savedDbFlags; /* Saved value of db->flags */ + u32 savedDbFlags; /* Saved value of db->mDbFlags */ - savedDbFlags = db->flags; + savedDbFlags = db->mDbFlags; if( NEVER(db->mallocFailed) ) goto exit_rename_table; assert( pSrc->nSrc==1 ); assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); @@ -97281,7 +101578,7 @@ if( !pTab ) goto exit_rename_table; iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); zDb = db->aDb[iDb].zDbSName; - db->flags |= SQLITE_PreferBuiltin; + db->mDbFlags |= DBFLAG_PreferBuiltin; /* Get a NULL terminated version of the new table name. */ zName = sqlite3NameFromToken(db, pName); @@ -97341,52 +101638,25 @@ if( v==0 ){ goto exit_rename_table; } - sqlite3BeginWriteOperation(pParse, pVTab!=0, iDb); - sqlite3ChangeCookie(pParse, iDb); - /* If this is a virtual table, invoke the xRename() function if - ** one is defined. The xRename() callback will modify the names - ** of any resources used by the v-table implementation (including other - ** SQLite tables) that are identified by the name of the virtual table. - */ -#ifndef SQLITE_OMIT_VIRTUALTABLE - if( pVTab ){ - int i = ++pParse->nMem; - sqlite3VdbeLoadString(v, i, zName); - sqlite3VdbeAddOp4(v, OP_VRename, i, 0, 0,(const char*)pVTab, P4_VTAB); - sqlite3MayAbort(pParse); - } -#endif - /* figure out how many UTF-8 characters are in zName */ zTabName = pTab->zName; nTabName = sqlite3Utf8CharLen(zTabName, -1); -#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - if( db->flags&SQLITE_ForeignKeys ){ - /* If foreign-key support is enabled, rewrite the CREATE TABLE - ** statements corresponding to all child tables of foreign key constraints - ** for which the renamed table is the parent table. */ - if( (zWhere=whereForeignKeys(pParse, pTab))!=0 ){ - sqlite3NestedParse(pParse, - "UPDATE \"%w\".%s SET " - "sql = sqlite_rename_parent(sql, %Q, %Q) " - "WHERE %s;", zDb, MASTER_NAME, zTabName, zName, zWhere); - sqlite3DbFree(db, zWhere); - } - } -#endif + /* Rewrite all CREATE TABLE, INDEX, TRIGGER or VIEW statements in + ** the schema to use the new table name. */ + sqlite3NestedParse(pParse, + "UPDATE \"%w\".%s SET " + "sql = sqlite_rename_table(%Q, type, name, sql, %Q, %Q, %d) " + "WHERE (type!='index' OR tbl_name=%Q COLLATE nocase)" + "AND name NOT LIKE 'sqlite_%%'" + , zDb, MASTER_NAME, zDb, zTabName, zName, (iDb==1), zTabName + ); - /* Modify the sqlite_master table to use the new table name. */ + /* Update the tbl_name and name columns of the sqlite_master table + ** as required. */ sqlite3NestedParse(pParse, "UPDATE %Q.%s SET " -#ifdef SQLITE_OMIT_TRIGGER - "sql = sqlite_rename_table(sql, %Q), " -#else - "sql = CASE " - "WHEN type = 'trigger' THEN sqlite_rename_trigger(sql, %Q)" - "ELSE sqlite_rename_table(sql, %Q) END, " -#endif "tbl_name = %Q, " "name = CASE " "WHEN type='table' THEN %Q " @@ -97395,11 +101665,9 @@ "ELSE name END " "WHERE tbl_name=%Q COLLATE nocase AND " "(type='table' OR type='index' OR type='trigger');", - zDb, MASTER_NAME, zName, zName, zName, -#ifndef SQLITE_OMIT_TRIGGER - zName, -#endif - zName, nTabName, zTabName + zDb, MASTER_NAME, + zName, zName, zName, + nTabName, zTabName ); #ifndef SQLITE_OMIT_AUTOINCREMENT @@ -97413,40 +101681,42 @@ } #endif -#ifndef SQLITE_OMIT_TRIGGER - /* If there are TEMP triggers on this table, modify the sqlite_temp_master - ** table. Don't do this if the table being ALTERed is itself located in - ** the temp database. - */ - if( (zWhere=whereTempTriggers(pParse, pTab))!=0 ){ + /* If the table being renamed is not itself part of the temp database, + ** edit view and trigger definitions within the temp database + ** as required. */ + if( iDb!=1 ){ sqlite3NestedParse(pParse, "UPDATE sqlite_temp_master SET " - "sql = sqlite_rename_trigger(sql, %Q), " - "tbl_name = %Q " - "WHERE %s;", zName, zName, zWhere); - sqlite3DbFree(db, zWhere); + "sql = sqlite_rename_table(%Q, type, name, sql, %Q, %Q, 1), " + "tbl_name = " + "CASE WHEN tbl_name=%Q COLLATE nocase AND " + " sqlite_rename_test(%Q, sql, type, name, 1) " + "THEN %Q ELSE tbl_name END " + "WHERE type IN ('view', 'trigger')" + , zDb, zTabName, zName, zTabName, zDb, zName); } -#endif -#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) - if( db->flags&SQLITE_ForeignKeys ){ - FKey *p; - for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ - Table *pFrom = p->pFrom; - if( pFrom!=pTab ){ - reloadTableSchema(pParse, p->pFrom, pFrom->zName); - } - } + /* If this is a virtual table, invoke the xRename() function if + ** one is defined. The xRename() callback will modify the names + ** of any resources used by the v-table implementation (including other + ** SQLite tables) that are identified by the name of the virtual table. + */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( pVTab ){ + int i = ++pParse->nMem; + sqlite3VdbeLoadString(v, i, zName); + sqlite3VdbeAddOp4(v, OP_VRename, i, 0, 0,(const char*)pVTab, P4_VTAB); + sqlite3MayAbort(pParse); } #endif - /* Drop and reload the internal table schema. */ - reloadTableSchema(pParse, pTab, zName); + renameReloadSchema(pParse, iDb); + renameTestSchema(pParse, zDb, iDb==1); exit_rename_table: sqlite3SrcListDelete(db, pSrc); sqlite3DbFree(db, zName); - db->flags = savedDbFlags; + db->mDbFlags = savedDbFlags; } /* @@ -97467,12 +101737,11 @@ Column *pCol; /* The new column */ Expr *pDflt; /* Default value for the new column */ sqlite3 *db; /* The database connection; */ - Vdbe *v = pParse->pVdbe; /* The prepared statement under construction */ + Vdbe *v; /* The prepared statement under construction */ int r1; /* Temporary registers */ db = pParse->db; if( pParse->nErr || db->mallocFailed ) return; - assert( v!=0 ); pNew = pParse->pNewTable; assert( pNew ); @@ -97547,11 +101816,11 @@ zCol = sqlite3DbStrNDup(db, (char*)pColDef->z, pColDef->n); if( zCol ){ char *zEnd = &zCol[pColDef->n-1]; - int savedDbFlags = db->flags; + u32 savedDbFlags = db->mDbFlags; while( zEnd>zCol && (*zEnd==';' || sqlite3Isspace(*zEnd)) ){ *zEnd-- = '\0'; } - db->flags |= SQLITE_PreferBuiltin; + db->mDbFlags |= DBFLAG_PreferBuiltin; sqlite3NestedParse(pParse, "UPDATE \"%w\".%s SET " "sql = substr(sql,1,%d) || ', ' || %Q || substr(sql,%d) " @@ -97560,7 +101829,7 @@ zTab ); sqlite3DbFree(db, zCol); - db->flags = savedDbFlags; + db->mDbFlags = savedDbFlags; } /* Make sure the schema version is at least 3. But do not upgrade @@ -97567,17 +101836,20 @@ ** from less than 3 to 4, as that will corrupt any preexisting DESC ** index. */ - r1 = sqlite3GetTempReg(pParse); - sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, r1, BTREE_FILE_FORMAT); - sqlite3VdbeUsesBtree(v, iDb); - sqlite3VdbeAddOp2(v, OP_AddImm, r1, -2); - sqlite3VdbeAddOp2(v, OP_IfPos, r1, sqlite3VdbeCurrentAddr(v)+2); - VdbeCoverage(v); - sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, 3); - sqlite3ReleaseTempReg(pParse, r1); + v = sqlite3GetVdbe(pParse); + if( v ){ + r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, r1, BTREE_FILE_FORMAT); + sqlite3VdbeUsesBtree(v, iDb); + sqlite3VdbeAddOp2(v, OP_AddImm, r1, -2); + sqlite3VdbeAddOp2(v, OP_IfPos, r1, sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_FILE_FORMAT, 3); + sqlite3ReleaseTempReg(pParse, r1); + } - /* Reload the schema of the modified table. */ - reloadTableSchema(pParse, pTab, pTab->zName); + /* Reload the table definition */ + renameReloadSchema(pParse, iDb); } /* @@ -97598,7 +101870,6 @@ SQLITE_PRIVATE void sqlite3AlterBeginAddColumn(Parse *pParse, SrcList *pSrc){ Table *pNew; Table *pTab; - Vdbe *v; int iDb; int i; int nAlloc; @@ -97662,16 +101933,1146 @@ pNew->addColOffset = pTab->addColOffset; pNew->nTabRef = 1; - /* Begin a transaction and increment the schema cookie. */ - sqlite3BeginWriteOperation(pParse, 0, iDb); - v = sqlite3GetVdbe(pParse); - if( !v ) goto exit_begin_add_column; - sqlite3ChangeCookie(pParse, iDb); - exit_begin_add_column: sqlite3SrcListDelete(db, pSrc); return; } + +/* +** Parameter pTab is the subject of an ALTER TABLE ... RENAME COLUMN +** command. This function checks if the table is a view or virtual +** table (columns of views or virtual tables may not be renamed). If so, +** it loads an error message into pParse and returns non-zero. +** +** Or, if pTab is not a view or virtual table, zero is returned. +*/ +#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) +static int isRealTable(Parse *pParse, Table *pTab){ + const char *zType = 0; +#ifndef SQLITE_OMIT_VIEW + if( pTab->pSelect ){ + zType = "view"; + } +#endif +#ifndef SQLITE_OMIT_VIRTUALTABLE + if( IsVirtual(pTab) ){ + zType = "virtual table"; + } +#endif + if( zType ){ + sqlite3ErrorMsg( + pParse, "cannot rename columns of %s \"%s\"", zType, pTab->zName + ); + return 1; + } + return 0; +} +#else /* !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE) */ +# define isRealTable(x,y) (0) +#endif + +/* +** Handles the following parser reduction: +** +** cmd ::= ALTER TABLE pSrc RENAME COLUMN pOld TO pNew +*/ +SQLITE_PRIVATE void sqlite3AlterRenameColumn( + Parse *pParse, /* Parsing context */ + SrcList *pSrc, /* Table being altered. pSrc->nSrc==1 */ + Token *pOld, /* Name of column being changed */ + Token *pNew /* New column name */ +){ + sqlite3 *db = pParse->db; /* Database connection */ + Table *pTab; /* Table being updated */ + int iCol; /* Index of column being renamed */ + char *zOld = 0; /* Old column name */ + char *zNew = 0; /* New column name */ + const char *zDb; /* Name of schema containing the table */ + int iSchema; /* Index of the schema */ + int bQuote; /* True to quote the new name */ + + /* Locate the table to be altered */ + pTab = sqlite3LocateTableItem(pParse, 0, &pSrc->a[0]); + if( !pTab ) goto exit_rename_column; + + /* Cannot alter a system table */ + if( SQLITE_OK!=isSystemTable(pParse, pTab->zName) ) goto exit_rename_column; + if( SQLITE_OK!=isRealTable(pParse, pTab) ) goto exit_rename_column; + + /* Which schema holds the table to be altered */ + iSchema = sqlite3SchemaToIndex(db, pTab->pSchema); + assert( iSchema>=0 ); + zDb = db->aDb[iSchema].zDbSName; + +#ifndef SQLITE_OMIT_AUTHORIZATION + /* Invoke the authorization callback. */ + if( sqlite3AuthCheck(pParse, SQLITE_ALTER_TABLE, zDb, pTab->zName, 0) ){ + goto exit_rename_column; + } +#endif + + /* Make sure the old name really is a column name in the table to be + ** altered. Set iCol to be the index of the column being renamed */ + zOld = sqlite3NameFromToken(db, pOld); + if( !zOld ) goto exit_rename_column; + for(iCol=0; iColnCol; iCol++){ + if( 0==sqlite3StrICmp(pTab->aCol[iCol].zName, zOld) ) break; + } + if( iCol==pTab->nCol ){ + sqlite3ErrorMsg(pParse, "no such column: \"%s\"", zOld); + goto exit_rename_column; + } + + /* Do the rename operation using a recursive UPDATE statement that + ** uses the sqlite_rename_column() SQL function to compute the new + ** CREATE statement text for the sqlite_master table. + */ + zNew = sqlite3NameFromToken(db, pNew); + if( !zNew ) goto exit_rename_column; + assert( pNew->n>0 ); + bQuote = sqlite3Isquote(pNew->z[0]); + sqlite3NestedParse(pParse, + "UPDATE \"%w\".%s SET " + "sql = sqlite_rename_column(sql, type, name, %Q, %Q, %d, %Q, %d, %d) " + "WHERE name NOT LIKE 'sqlite_%%' AND (type != 'index' OR tbl_name = %Q)" + " AND sql NOT LIKE 'create virtual%%'", + zDb, MASTER_NAME, + zDb, pTab->zName, iCol, zNew, bQuote, iSchema==1, + pTab->zName + ); + + sqlite3NestedParse(pParse, + "UPDATE temp.%s SET " + "sql = sqlite_rename_column(sql, type, name, %Q, %Q, %d, %Q, %d, 1) " + "WHERE type IN ('trigger', 'view')", + MASTER_NAME, + zDb, pTab->zName, iCol, zNew, bQuote + ); + + /* Drop and reload the database schema. */ + renameReloadSchema(pParse, iSchema); + renameTestSchema(pParse, zDb, iSchema==1); + + exit_rename_column: + sqlite3SrcListDelete(db, pSrc); + sqlite3DbFree(db, zOld); + sqlite3DbFree(db, zNew); + return; +} + +/* +** Each RenameToken object maps an element of the parse tree into +** the token that generated that element. The parse tree element +** might be one of: +** +** * A pointer to an Expr that represents an ID +** * The name of a table column in Column.zName +** +** A list of RenameToken objects can be constructed during parsing. +** Each new object is created by sqlite3RenameTokenMap(). +** As the parse tree is transformed, the sqlite3RenameTokenRemap() +** routine is used to keep the mapping current. +** +** After the parse finishes, renameTokenFind() routine can be used +** to look up the actual token value that created some element in +** the parse tree. +*/ +struct RenameToken { + void *p; /* Parse tree element created by token t */ + Token t; /* The token that created parse tree element p */ + RenameToken *pNext; /* Next is a list of all RenameToken objects */ +}; + +/* +** The context of an ALTER TABLE RENAME COLUMN operation that gets passed +** down into the Walker. +*/ +typedef struct RenameCtx RenameCtx; +struct RenameCtx { + RenameToken *pList; /* List of tokens to overwrite */ + int nList; /* Number of tokens in pList */ + int iCol; /* Index of column being renamed */ + Table *pTab; /* Table being ALTERed */ + const char *zOld; /* Old column name */ +}; + +#ifdef SQLITE_DEBUG +/* +** This function is only for debugging. It performs two tasks: +** +** 1. Checks that pointer pPtr does not already appear in the +** rename-token list. +** +** 2. Dereferences each pointer in the rename-token list. +** +** The second is most effective when debugging under valgrind or +** address-sanitizer or similar. If any of these pointers no longer +** point to valid objects, an exception is raised by the memory-checking +** tool. +** +** The point of this is to prevent comparisons of invalid pointer values. +** Even though this always seems to work, it is undefined according to the +** C standard. Example of undefined comparison: +** +** sqlite3_free(x); +** if( x==y ) ... +** +** Technically, as x no longer points into a valid object or to the byte +** following a valid object, it may not be used in comparison operations. +*/ +static void renameTokenCheckAll(Parse *pParse, void *pPtr){ + if( pParse->nErr==0 && pParse->db->mallocFailed==0 ){ + RenameToken *p; + u8 i = 0; + for(p=pParse->pRename; p; p=p->pNext){ + if( p->p ){ + assert( p->p!=pPtr ); + i += *(u8*)(p->p); + } + } + } +} +#else +# define renameTokenCheckAll(x,y) +#endif + +/* +** Remember that the parser tree element pPtr was created using +** the token pToken. +** +** In other words, construct a new RenameToken object and add it +** to the list of RenameToken objects currently being built up +** in pParse->pRename. +** +** The pPtr argument is returned so that this routine can be used +** with tail recursion in tokenExpr() routine, for a small performance +** improvement. +*/ +SQLITE_PRIVATE void *sqlite3RenameTokenMap(Parse *pParse, void *pPtr, Token *pToken){ + RenameToken *pNew; + assert( pPtr || pParse->db->mallocFailed ); + renameTokenCheckAll(pParse, pPtr); + pNew = sqlite3DbMallocZero(pParse->db, sizeof(RenameToken)); + if( pNew ){ + pNew->p = pPtr; + pNew->t = *pToken; + pNew->pNext = pParse->pRename; + pParse->pRename = pNew; + } + + return pPtr; +} + +/* +** It is assumed that there is already a RenameToken object associated +** with parse tree element pFrom. This function remaps the associated token +** to parse tree element pTo. +*/ +SQLITE_PRIVATE void sqlite3RenameTokenRemap(Parse *pParse, void *pTo, void *pFrom){ + RenameToken *p; + renameTokenCheckAll(pParse, pTo); + for(p=pParse->pRename; p; p=p->pNext){ + if( p->p==pFrom ){ + p->p = pTo; + break; + } + } +} + +/* +** Walker callback used by sqlite3RenameExprUnmap(). +*/ +static int renameUnmapExprCb(Walker *pWalker, Expr *pExpr){ + Parse *pParse = pWalker->pParse; + sqlite3RenameTokenRemap(pParse, 0, (void*)pExpr); + return WRC_Continue; +} + +/* +** Remove all nodes that are part of expression pExpr from the rename list. +*/ +SQLITE_PRIVATE void sqlite3RenameExprUnmap(Parse *pParse, Expr *pExpr){ + Walker sWalker; + memset(&sWalker, 0, sizeof(Walker)); + sWalker.pParse = pParse; + sWalker.xExprCallback = renameUnmapExprCb; + sqlite3WalkExpr(&sWalker, pExpr); +} + +/* +** Remove all nodes that are part of expression-list pEList from the +** rename list. +*/ +SQLITE_PRIVATE void sqlite3RenameExprlistUnmap(Parse *pParse, ExprList *pEList){ + if( pEList ){ + int i; + Walker sWalker; + memset(&sWalker, 0, sizeof(Walker)); + sWalker.pParse = pParse; + sWalker.xExprCallback = renameUnmapExprCb; + sqlite3WalkExprList(&sWalker, pEList); + for(i=0; inExpr; i++){ + sqlite3RenameTokenRemap(pParse, 0, (void*)pEList->a[i].zName); + } + } +} + +/* +** Free the list of RenameToken objects given in the second argument +*/ +static void renameTokenFree(sqlite3 *db, RenameToken *pToken){ + RenameToken *pNext; + RenameToken *p; + for(p=pToken; p; p=pNext){ + pNext = p->pNext; + sqlite3DbFree(db, p); + } +} + +/* +** Search the Parse object passed as the first argument for a RenameToken +** object associated with parse tree element pPtr. If found, remove it +** from the Parse object and add it to the list maintained by the +** RenameCtx object passed as the second argument. +*/ +static void renameTokenFind(Parse *pParse, struct RenameCtx *pCtx, void *pPtr){ + RenameToken **pp; + assert( pPtr!=0 ); + for(pp=&pParse->pRename; (*pp); pp=&(*pp)->pNext){ + if( (*pp)->p==pPtr ){ + RenameToken *pToken = *pp; + *pp = pToken->pNext; + pToken->pNext = pCtx->pList; + pCtx->pList = pToken; + pCtx->nList++; + break; + } + } +} + +/* +** This is a Walker select callback. It does nothing. It is only required +** because without a dummy callback, sqlite3WalkExpr() and similar do not +** descend into sub-select statements. +*/ +static int renameColumnSelectCb(Walker *pWalker, Select *p){ + UNUSED_PARAMETER(pWalker); + UNUSED_PARAMETER(p); + return WRC_Continue; +} + +/* +** This is a Walker expression callback. +** +** For every TK_COLUMN node in the expression tree, search to see +** if the column being references is the column being renamed by an +** ALTER TABLE statement. If it is, then attach its associated +** RenameToken object to the list of RenameToken objects being +** constructed in RenameCtx object at pWalker->u.pRename. +*/ +static int renameColumnExprCb(Walker *pWalker, Expr *pExpr){ + RenameCtx *p = pWalker->u.pRename; + if( pExpr->op==TK_TRIGGER + && pExpr->iColumn==p->iCol + && pWalker->pParse->pTriggerTab==p->pTab + ){ + renameTokenFind(pWalker->pParse, p, (void*)pExpr); + }else if( pExpr->op==TK_COLUMN + && pExpr->iColumn==p->iCol + && p->pTab==pExpr->y.pTab + ){ + renameTokenFind(pWalker->pParse, p, (void*)pExpr); + } + return WRC_Continue; +} + +/* +** The RenameCtx contains a list of tokens that reference a column that +** is being renamed by an ALTER TABLE statement. Return the "last" +** RenameToken in the RenameCtx and remove that RenameToken from the +** RenameContext. "Last" means the last RenameToken encountered when +** the input SQL is parsed from left to right. Repeated calls to this routine +** return all column name tokens in the order that they are encountered +** in the SQL statement. +*/ +static RenameToken *renameColumnTokenNext(RenameCtx *pCtx){ + RenameToken *pBest = pCtx->pList; + RenameToken *pToken; + RenameToken **pp; + + for(pToken=pBest->pNext; pToken; pToken=pToken->pNext){ + if( pToken->t.z>pBest->t.z ) pBest = pToken; + } + for(pp=&pCtx->pList; *pp!=pBest; pp=&(*pp)->pNext); + *pp = pBest->pNext; + + return pBest; +} + +/* +** An error occured while parsing or otherwise processing a database +** object (either pParse->pNewTable, pNewIndex or pNewTrigger) as part of an +** ALTER TABLE RENAME COLUMN program. The error message emitted by the +** sub-routine is currently stored in pParse->zErrMsg. This function +** adds context to the error message and then stores it in pCtx. +*/ +static void renameColumnParseError( + sqlite3_context *pCtx, + int bPost, + sqlite3_value *pType, + sqlite3_value *pObject, + Parse *pParse +){ + const char *zT = (const char*)sqlite3_value_text(pType); + const char *zN = (const char*)sqlite3_value_text(pObject); + char *zErr; + + zErr = sqlite3_mprintf("error in %s %s%s: %s", + zT, zN, (bPost ? " after rename" : ""), + pParse->zErrMsg + ); + sqlite3_result_error(pCtx, zErr, -1); + sqlite3_free(zErr); +} + +/* +** For each name in the the expression-list pEList (i.e. each +** pEList->a[i].zName) that matches the string in zOld, extract the +** corresponding rename-token from Parse object pParse and add it +** to the RenameCtx pCtx. +*/ +static void renameColumnElistNames( + Parse *pParse, + RenameCtx *pCtx, + ExprList *pEList, + const char *zOld +){ + if( pEList ){ + int i; + for(i=0; inExpr; i++){ + char *zName = pEList->a[i].zName; + if( 0==sqlite3_stricmp(zName, zOld) ){ + renameTokenFind(pParse, pCtx, (void*)zName); + } + } + } +} + +/* +** For each name in the the id-list pIdList (i.e. each pIdList->a[i].zName) +** that matches the string in zOld, extract the corresponding rename-token +** from Parse object pParse and add it to the RenameCtx pCtx. +*/ +static void renameColumnIdlistNames( + Parse *pParse, + RenameCtx *pCtx, + IdList *pIdList, + const char *zOld +){ + if( pIdList ){ + int i; + for(i=0; inId; i++){ + char *zName = pIdList->a[i].zName; + if( 0==sqlite3_stricmp(zName, zOld) ){ + renameTokenFind(pParse, pCtx, (void*)zName); + } + } + } +} + +/* +** Parse the SQL statement zSql using Parse object (*p). The Parse object +** is initialized by this function before it is used. +*/ +static int renameParseSql( + Parse *p, /* Memory to use for Parse object */ + const char *zDb, /* Name of schema SQL belongs to */ + int bTable, /* 1 -> RENAME TABLE, 0 -> RENAME COLUMN */ + sqlite3 *db, /* Database handle */ + const char *zSql, /* SQL to parse */ + int bTemp /* True if SQL is from temp schema */ +){ + int rc; + char *zErr = 0; + + db->init.iDb = bTemp ? 1 : sqlite3FindDbName(db, zDb); + + /* Parse the SQL statement passed as the first argument. If no error + ** occurs and the parse does not result in a new table, index or + ** trigger object, the database must be corrupt. */ + memset(p, 0, sizeof(Parse)); + p->eParseMode = (bTable ? PARSE_MODE_RENAME_TABLE : PARSE_MODE_RENAME_COLUMN); + p->db = db; + p->nQueryLoop = 1; + rc = sqlite3RunParser(p, zSql, &zErr); + assert( p->zErrMsg==0 ); + assert( rc!=SQLITE_OK || zErr==0 ); + assert( (0!=p->pNewTable) + (0!=p->pNewIndex) + (0!=p->pNewTrigger)<2 ); + p->zErrMsg = zErr; + if( db->mallocFailed ) rc = SQLITE_NOMEM; + if( rc==SQLITE_OK + && p->pNewTable==0 && p->pNewIndex==0 && p->pNewTrigger==0 + ){ + rc = SQLITE_CORRUPT_BKPT; + } + +#ifdef SQLITE_DEBUG + /* Ensure that all mappings in the Parse.pRename list really do map to + ** a part of the input string. */ + if( rc==SQLITE_OK ){ + int nSql = sqlite3Strlen30(zSql); + RenameToken *pToken; + for(pToken=p->pRename; pToken; pToken=pToken->pNext){ + assert( pToken->t.z>=zSql && &pToken->t.z[pToken->t.n]<=&zSql[nSql] ); + } + } +#endif + + db->init.iDb = 0; + return rc; +} + +/* +** This function edits SQL statement zSql, replacing each token identified +** by the linked list pRename with the text of zNew. If argument bQuote is +** true, then zNew is always quoted first. If no error occurs, the result +** is loaded into context object pCtx as the result. +** +** Or, if an error occurs (i.e. an OOM condition), an error is left in +** pCtx and an SQLite error code returned. +*/ +static int renameEditSql( + sqlite3_context *pCtx, /* Return result here */ + RenameCtx *pRename, /* Rename context */ + const char *zSql, /* SQL statement to edit */ + const char *zNew, /* New token text */ + int bQuote /* True to always quote token */ +){ + int nNew = sqlite3Strlen30(zNew); + int nSql = sqlite3Strlen30(zSql); + sqlite3 *db = sqlite3_context_db_handle(pCtx); + int rc = SQLITE_OK; + char *zQuot; + char *zOut; + int nQuot; + + /* Set zQuot to point to a buffer containing a quoted copy of the + ** identifier zNew. If the corresponding identifier in the original + ** ALTER TABLE statement was quoted (bQuote==1), then set zNew to + ** point to zQuot so that all substitutions are made using the + ** quoted version of the new column name. */ + zQuot = sqlite3MPrintf(db, "\"%w\"", zNew); + if( zQuot==0 ){ + return SQLITE_NOMEM; + }else{ + nQuot = sqlite3Strlen30(zQuot); + } + if( bQuote ){ + zNew = zQuot; + nNew = nQuot; + } + + /* At this point pRename->pList contains a list of RenameToken objects + ** corresponding to all tokens in the input SQL that must be replaced + ** with the new column name. All that remains is to construct and + ** return the edited SQL string. */ + assert( nQuot>=nNew ); + zOut = sqlite3DbMallocZero(db, nSql + pRename->nList*nQuot + 1); + if( zOut ){ + int nOut = nSql; + memcpy(zOut, zSql, nSql); + while( pRename->pList ){ + int iOff; /* Offset of token to replace in zOut */ + RenameToken *pBest = renameColumnTokenNext(pRename); + + u32 nReplace; + const char *zReplace; + if( sqlite3IsIdChar(*pBest->t.z) ){ + nReplace = nNew; + zReplace = zNew; + }else{ + nReplace = nQuot; + zReplace = zQuot; + } + + iOff = pBest->t.z - zSql; + if( pBest->t.n!=nReplace ){ + memmove(&zOut[iOff + nReplace], &zOut[iOff + pBest->t.n], + nOut - (iOff + pBest->t.n) + ); + nOut += nReplace - pBest->t.n; + zOut[nOut] = '\0'; + } + memcpy(&zOut[iOff], zReplace, nReplace); + sqlite3DbFree(db, pBest); + } + + sqlite3_result_text(pCtx, zOut, -1, SQLITE_TRANSIENT); + sqlite3DbFree(db, zOut); + }else{ + rc = SQLITE_NOMEM; + } + + sqlite3_free(zQuot); + return rc; +} + +/* +** Resolve all symbols in the trigger at pParse->pNewTrigger, assuming +** it was read from the schema of database zDb. Return SQLITE_OK if +** successful. Otherwise, return an SQLite error code and leave an error +** message in the Parse object. +*/ +static int renameResolveTrigger(Parse *pParse, const char *zDb){ + sqlite3 *db = pParse->db; + Trigger *pNew = pParse->pNewTrigger; + TriggerStep *pStep; + NameContext sNC; + int rc = SQLITE_OK; + + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + assert( pNew->pTabSchema ); + pParse->pTriggerTab = sqlite3FindTable(db, pNew->table, + db->aDb[sqlite3SchemaToIndex(db, pNew->pTabSchema)].zDbSName + ); + pParse->eTriggerOp = pNew->op; + /* ALWAYS() because if the table of the trigger does not exist, the + ** error would have been hit before this point */ + if( ALWAYS(pParse->pTriggerTab) ){ + rc = sqlite3ViewGetColumnNames(pParse, pParse->pTriggerTab); + } + + /* Resolve symbols in WHEN clause */ + if( rc==SQLITE_OK && pNew->pWhen ){ + rc = sqlite3ResolveExprNames(&sNC, pNew->pWhen); + } + + for(pStep=pNew->step_list; rc==SQLITE_OK && pStep; pStep=pStep->pNext){ + if( pStep->pSelect ){ + sqlite3SelectPrep(pParse, pStep->pSelect, &sNC); + if( pParse->nErr ) rc = pParse->rc; + } + if( rc==SQLITE_OK && pStep->zTarget ){ + Table *pTarget = sqlite3LocateTable(pParse, 0, pStep->zTarget, zDb); + if( pTarget==0 ){ + rc = SQLITE_ERROR; + }else if( SQLITE_OK==(rc = sqlite3ViewGetColumnNames(pParse, pTarget)) ){ + SrcList sSrc; + memset(&sSrc, 0, sizeof(sSrc)); + sSrc.nSrc = 1; + sSrc.a[0].zName = pStep->zTarget; + sSrc.a[0].pTab = pTarget; + sNC.pSrcList = &sSrc; + if( pStep->pWhere ){ + rc = sqlite3ResolveExprNames(&sNC, pStep->pWhere); + } + if( rc==SQLITE_OK ){ + rc = sqlite3ResolveExprListNames(&sNC, pStep->pExprList); + } + assert( !pStep->pUpsert || (!pStep->pWhere && !pStep->pExprList) ); + if( pStep->pUpsert ){ + Upsert *pUpsert = pStep->pUpsert; + assert( rc==SQLITE_OK ); + pUpsert->pUpsertSrc = &sSrc; + sNC.uNC.pUpsert = pUpsert; + sNC.ncFlags = NC_UUpsert; + rc = sqlite3ResolveExprListNames(&sNC, pUpsert->pUpsertTarget); + if( rc==SQLITE_OK ){ + ExprList *pUpsertSet = pUpsert->pUpsertSet; + rc = sqlite3ResolveExprListNames(&sNC, pUpsertSet); + } + if( rc==SQLITE_OK ){ + rc = sqlite3ResolveExprNames(&sNC, pUpsert->pUpsertWhere); + } + if( rc==SQLITE_OK ){ + rc = sqlite3ResolveExprNames(&sNC, pUpsert->pUpsertTargetWhere); + } + sNC.ncFlags = 0; + } + } + } + } + return rc; +} + +/* +** Invoke sqlite3WalkExpr() or sqlite3WalkSelect() on all Select or Expr +** objects that are part of the trigger passed as the second argument. +*/ +static void renameWalkTrigger(Walker *pWalker, Trigger *pTrigger){ + TriggerStep *pStep; + + /* Find tokens to edit in WHEN clause */ + sqlite3WalkExpr(pWalker, pTrigger->pWhen); + + /* Find tokens to edit in trigger steps */ + for(pStep=pTrigger->step_list; pStep; pStep=pStep->pNext){ + sqlite3WalkSelect(pWalker, pStep->pSelect); + sqlite3WalkExpr(pWalker, pStep->pWhere); + sqlite3WalkExprList(pWalker, pStep->pExprList); + if( pStep->pUpsert ){ + Upsert *pUpsert = pStep->pUpsert; + sqlite3WalkExprList(pWalker, pUpsert->pUpsertTarget); + sqlite3WalkExprList(pWalker, pUpsert->pUpsertSet); + sqlite3WalkExpr(pWalker, pUpsert->pUpsertWhere); + sqlite3WalkExpr(pWalker, pUpsert->pUpsertTargetWhere); + } + } +} + +/* +** Free the contents of Parse object (*pParse). Do not free the memory +** occupied by the Parse object itself. +*/ +static void renameParseCleanup(Parse *pParse){ + sqlite3 *db = pParse->db; + if( pParse->pVdbe ){ + sqlite3VdbeFinalize(pParse->pVdbe); + } + sqlite3DeleteTable(db, pParse->pNewTable); + if( pParse->pNewIndex ) sqlite3FreeIndex(db, pParse->pNewIndex); + sqlite3DeleteTrigger(db, pParse->pNewTrigger); + sqlite3DbFree(db, pParse->zErrMsg); + renameTokenFree(db, pParse->pRename); + sqlite3ParserReset(pParse); +} + +/* +** SQL function: +** +** sqlite_rename_column(zSql, iCol, bQuote, zNew, zTable, zOld) +** +** 0. zSql: SQL statement to rewrite +** 1. type: Type of object ("table", "view" etc.) +** 2. object: Name of object +** 3. Database: Database name (e.g. "main") +** 4. Table: Table name +** 5. iCol: Index of column to rename +** 6. zNew: New column name +** 7. bQuote: Non-zero if the new column name should be quoted. +** 8. bTemp: True if zSql comes from temp schema +** +** Do a column rename operation on the CREATE statement given in zSql. +** The iCol-th column (left-most is 0) of table zTable is renamed from zCol +** into zNew. The name should be quoted if bQuote is true. +** +** This function is used internally by the ALTER TABLE RENAME COLUMN command. +** It is only accessible to SQL created using sqlite3NestedParse(). It is +** not reachable from ordinary SQL passed into sqlite3_prepare(). +*/ +static void renameColumnFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ + sqlite3 *db = sqlite3_context_db_handle(context); + RenameCtx sCtx; + const char *zSql = (const char*)sqlite3_value_text(argv[0]); + const char *zDb = (const char*)sqlite3_value_text(argv[3]); + const char *zTable = (const char*)sqlite3_value_text(argv[4]); + int iCol = sqlite3_value_int(argv[5]); + const char *zNew = (const char*)sqlite3_value_text(argv[6]); + int bQuote = sqlite3_value_int(argv[7]); + int bTemp = sqlite3_value_int(argv[8]); + const char *zOld; + int rc; + Parse sParse; + Walker sWalker; + Index *pIdx; + int i; + Table *pTab; +#ifndef SQLITE_OMIT_AUTHORIZATION + sqlite3_xauth xAuth = db->xAuth; +#endif + + UNUSED_PARAMETER(NotUsed); + if( zSql==0 ) return; + if( zTable==0 ) return; + if( zNew==0 ) return; + if( iCol<0 ) return; + sqlite3BtreeEnterAll(db); + pTab = sqlite3FindTable(db, zTable, zDb); + if( pTab==0 || iCol>=pTab->nCol ){ + sqlite3BtreeLeaveAll(db); + return; + } + zOld = pTab->aCol[iCol].zName; + memset(&sCtx, 0, sizeof(sCtx)); + sCtx.iCol = ((iCol==pTab->iPKey) ? -1 : iCol); + +#ifndef SQLITE_OMIT_AUTHORIZATION + db->xAuth = 0; +#endif + rc = renameParseSql(&sParse, zDb, 0, db, zSql, bTemp); + + /* Find tokens that need to be replaced. */ + memset(&sWalker, 0, sizeof(Walker)); + sWalker.pParse = &sParse; + sWalker.xExprCallback = renameColumnExprCb; + sWalker.xSelectCallback = renameColumnSelectCb; + sWalker.u.pRename = &sCtx; + + sCtx.pTab = pTab; + if( rc!=SQLITE_OK ) goto renameColumnFunc_done; + if( sParse.pNewTable ){ + Select *pSelect = sParse.pNewTable->pSelect; + if( pSelect ){ + sParse.rc = SQLITE_OK; + sqlite3SelectPrep(&sParse, sParse.pNewTable->pSelect, 0); + rc = (db->mallocFailed ? SQLITE_NOMEM : sParse.rc); + if( rc==SQLITE_OK ){ + sqlite3WalkSelect(&sWalker, pSelect); + } + if( rc!=SQLITE_OK ) goto renameColumnFunc_done; + }else{ + /* A regular table */ + int bFKOnly = sqlite3_stricmp(zTable, sParse.pNewTable->zName); + FKey *pFKey; + assert( sParse.pNewTable->pSelect==0 ); + sCtx.pTab = sParse.pNewTable; + if( bFKOnly==0 ){ + renameTokenFind( + &sParse, &sCtx, (void*)sParse.pNewTable->aCol[iCol].zName + ); + if( sCtx.iCol<0 ){ + renameTokenFind(&sParse, &sCtx, (void*)&sParse.pNewTable->iPKey); + } + sqlite3WalkExprList(&sWalker, sParse.pNewTable->pCheck); + for(pIdx=sParse.pNewTable->pIndex; pIdx; pIdx=pIdx->pNext){ + sqlite3WalkExprList(&sWalker, pIdx->aColExpr); + } + } + + for(pFKey=sParse.pNewTable->pFKey; pFKey; pFKey=pFKey->pNextFrom){ + for(i=0; inCol; i++){ + if( bFKOnly==0 && pFKey->aCol[i].iFrom==iCol ){ + renameTokenFind(&sParse, &sCtx, (void*)&pFKey->aCol[i]); + } + if( 0==sqlite3_stricmp(pFKey->zTo, zTable) + && 0==sqlite3_stricmp(pFKey->aCol[i].zCol, zOld) + ){ + renameTokenFind(&sParse, &sCtx, (void*)pFKey->aCol[i].zCol); + } + } + } + } + }else if( sParse.pNewIndex ){ + sqlite3WalkExprList(&sWalker, sParse.pNewIndex->aColExpr); + sqlite3WalkExpr(&sWalker, sParse.pNewIndex->pPartIdxWhere); + }else{ + /* A trigger */ + TriggerStep *pStep; + rc = renameResolveTrigger(&sParse, (bTemp ? 0 : zDb)); + if( rc!=SQLITE_OK ) goto renameColumnFunc_done; + + for(pStep=sParse.pNewTrigger->step_list; pStep; pStep=pStep->pNext){ + if( pStep->zTarget ){ + Table *pTarget = sqlite3LocateTable(&sParse, 0, pStep->zTarget, zDb); + if( pTarget==pTab ){ + if( pStep->pUpsert ){ + ExprList *pUpsertSet = pStep->pUpsert->pUpsertSet; + renameColumnElistNames(&sParse, &sCtx, pUpsertSet, zOld); + } + renameColumnIdlistNames(&sParse, &sCtx, pStep->pIdList, zOld); + renameColumnElistNames(&sParse, &sCtx, pStep->pExprList, zOld); + } + } + } + + + /* Find tokens to edit in UPDATE OF clause */ + if( sParse.pTriggerTab==pTab ){ + renameColumnIdlistNames(&sParse, &sCtx,sParse.pNewTrigger->pColumns,zOld); + } + + /* Find tokens to edit in various expressions and selects */ + renameWalkTrigger(&sWalker, sParse.pNewTrigger); + } + + assert( rc==SQLITE_OK ); + rc = renameEditSql(context, &sCtx, zSql, zNew, bQuote); + +renameColumnFunc_done: + if( rc!=SQLITE_OK ){ + if( sParse.zErrMsg ){ + renameColumnParseError(context, 0, argv[1], argv[2], &sParse); + }else{ + sqlite3_result_error_code(context, rc); + } + } + + renameParseCleanup(&sParse); + renameTokenFree(db, sCtx.pList); +#ifndef SQLITE_OMIT_AUTHORIZATION + db->xAuth = xAuth; +#endif + sqlite3BtreeLeaveAll(db); +} + +/* +** Walker expression callback used by "RENAME TABLE". +*/ +static int renameTableExprCb(Walker *pWalker, Expr *pExpr){ + RenameCtx *p = pWalker->u.pRename; + if( pExpr->op==TK_COLUMN && p->pTab==pExpr->y.pTab ){ + renameTokenFind(pWalker->pParse, p, (void*)&pExpr->y.pTab); + } + return WRC_Continue; +} + +/* +** Walker select callback used by "RENAME TABLE". +*/ +static int renameTableSelectCb(Walker *pWalker, Select *pSelect){ + int i; + RenameCtx *p = pWalker->u.pRename; + SrcList *pSrc = pSelect->pSrc; + for(i=0; inSrc; i++){ + struct SrcList_item *pItem = &pSrc->a[i]; + if( pItem->pTab==p->pTab ){ + renameTokenFind(pWalker->pParse, p, pItem->zName); + } + } + + return WRC_Continue; +} + + +/* +** This C function implements an SQL user function that is used by SQL code +** generated by the ALTER TABLE ... RENAME command to modify the definition +** of any foreign key constraints that use the table being renamed as the +** parent table. It is passed three arguments: +** +** 0: The database containing the table being renamed. +** 1. type: Type of object ("table", "view" etc.) +** 2. object: Name of object +** 3: The complete text of the schema statement being modified, +** 4: The old name of the table being renamed, and +** 5: The new name of the table being renamed. +** 6: True if the schema statement comes from the temp db. +** +** It returns the new schema statement. For example: +** +** sqlite_rename_table('main', 'CREATE TABLE t1(a REFERENCES t2)','t2','t3',0) +** -> 'CREATE TABLE t1(a REFERENCES t3)' +*/ +static void renameTableFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ + sqlite3 *db = sqlite3_context_db_handle(context); + const char *zDb = (const char*)sqlite3_value_text(argv[0]); + const char *zInput = (const char*)sqlite3_value_text(argv[3]); + const char *zOld = (const char*)sqlite3_value_text(argv[4]); + const char *zNew = (const char*)sqlite3_value_text(argv[5]); + int bTemp = sqlite3_value_int(argv[6]); + UNUSED_PARAMETER(NotUsed); + + if( zInput && zOld && zNew ){ + Parse sParse; + int rc; + int bQuote = 1; + RenameCtx sCtx; + Walker sWalker; + +#ifndef SQLITE_OMIT_AUTHORIZATION + sqlite3_xauth xAuth = db->xAuth; + db->xAuth = 0; +#endif + + sqlite3BtreeEnterAll(db); + + memset(&sCtx, 0, sizeof(RenameCtx)); + sCtx.pTab = sqlite3FindTable(db, zOld, zDb); + memset(&sWalker, 0, sizeof(Walker)); + sWalker.pParse = &sParse; + sWalker.xExprCallback = renameTableExprCb; + sWalker.xSelectCallback = renameTableSelectCb; + sWalker.u.pRename = &sCtx; + + rc = renameParseSql(&sParse, zDb, 1, db, zInput, bTemp); + + if( rc==SQLITE_OK ){ + int isLegacy = (db->flags & SQLITE_LegacyAlter); + if( sParse.pNewTable ){ + Table *pTab = sParse.pNewTable; + + if( pTab->pSelect ){ + if( isLegacy==0 ){ + NameContext sNC; + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = &sParse; + + sqlite3SelectPrep(&sParse, pTab->pSelect, &sNC); + if( sParse.nErr ) rc = sParse.rc; + sqlite3WalkSelect(&sWalker, pTab->pSelect); + } + }else{ + /* Modify any FK definitions to point to the new table. */ +#ifndef SQLITE_OMIT_FOREIGN_KEY + if( isLegacy==0 || (db->flags & SQLITE_ForeignKeys) ){ + FKey *pFKey; + for(pFKey=pTab->pFKey; pFKey; pFKey=pFKey->pNextFrom){ + if( sqlite3_stricmp(pFKey->zTo, zOld)==0 ){ + renameTokenFind(&sParse, &sCtx, (void*)pFKey->zTo); + } + } + } +#endif + + /* If this is the table being altered, fix any table refs in CHECK + ** expressions. Also update the name that appears right after the + ** "CREATE [VIRTUAL] TABLE" bit. */ + if( sqlite3_stricmp(zOld, pTab->zName)==0 ){ + sCtx.pTab = pTab; + if( isLegacy==0 ){ + sqlite3WalkExprList(&sWalker, pTab->pCheck); + } + renameTokenFind(&sParse, &sCtx, pTab->zName); + } + } + } + + else if( sParse.pNewIndex ){ + renameTokenFind(&sParse, &sCtx, sParse.pNewIndex->zName); + if( isLegacy==0 ){ + sqlite3WalkExpr(&sWalker, sParse.pNewIndex->pPartIdxWhere); + } + } + +#ifndef SQLITE_OMIT_TRIGGER + else{ + Trigger *pTrigger = sParse.pNewTrigger; + TriggerStep *pStep; + if( 0==sqlite3_stricmp(sParse.pNewTrigger->table, zOld) + && sCtx.pTab->pSchema==pTrigger->pTabSchema + ){ + renameTokenFind(&sParse, &sCtx, sParse.pNewTrigger->table); + } + + if( isLegacy==0 ){ + rc = renameResolveTrigger(&sParse, bTemp ? 0 : zDb); + if( rc==SQLITE_OK ){ + renameWalkTrigger(&sWalker, pTrigger); + for(pStep=pTrigger->step_list; pStep; pStep=pStep->pNext){ + if( pStep->zTarget && 0==sqlite3_stricmp(pStep->zTarget, zOld) ){ + renameTokenFind(&sParse, &sCtx, pStep->zTarget); + } + } + } + } + } +#endif + } + + if( rc==SQLITE_OK ){ + rc = renameEditSql(context, &sCtx, zInput, zNew, bQuote); + } + if( rc!=SQLITE_OK ){ + if( sParse.zErrMsg ){ + renameColumnParseError(context, 0, argv[1], argv[2], &sParse); + }else{ + sqlite3_result_error_code(context, rc); + } + } + + renameParseCleanup(&sParse); + renameTokenFree(db, sCtx.pList); + sqlite3BtreeLeaveAll(db); +#ifndef SQLITE_OMIT_AUTHORIZATION + db->xAuth = xAuth; +#endif + } + + return; +} + +/* +** An SQL user function that checks that there are no parse or symbol +** resolution problems in a CREATE TRIGGER|TABLE|VIEW|INDEX statement. +** After an ALTER TABLE .. RENAME operation is performed and the schema +** reloaded, this function is called on each SQL statement in the schema +** to ensure that it is still usable. +** +** 0: Database name ("main", "temp" etc.). +** 1: SQL statement. +** 2: Object type ("view", "table", "trigger" or "index"). +** 3: Object name. +** 4: True if object is from temp schema. +** +** Unless it finds an error, this function normally returns NULL. However, it +** returns integer value 1 if: +** +** * the SQL argument creates a trigger, and +** * the table that the trigger is attached to is in database zDb. +*/ +static void renameTableTest( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ + sqlite3 *db = sqlite3_context_db_handle(context); + char const *zDb = (const char*)sqlite3_value_text(argv[0]); + char const *zInput = (const char*)sqlite3_value_text(argv[1]); + int bTemp = sqlite3_value_int(argv[4]); + int isLegacy = (db->flags & SQLITE_LegacyAlter); + +#ifndef SQLITE_OMIT_AUTHORIZATION + sqlite3_xauth xAuth = db->xAuth; + db->xAuth = 0; +#endif + + UNUSED_PARAMETER(NotUsed); + if( zDb && zInput ){ + int rc; + Parse sParse; + rc = renameParseSql(&sParse, zDb, 1, db, zInput, bTemp); + if( rc==SQLITE_OK ){ + if( isLegacy==0 && sParse.pNewTable && sParse.pNewTable->pSelect ){ + NameContext sNC; + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = &sParse; + sqlite3SelectPrep(&sParse, sParse.pNewTable->pSelect, &sNC); + if( sParse.nErr ) rc = sParse.rc; + } + + else if( sParse.pNewTrigger ){ + if( isLegacy==0 ){ + rc = renameResolveTrigger(&sParse, bTemp ? 0 : zDb); + } + if( rc==SQLITE_OK ){ + int i1 = sqlite3SchemaToIndex(db, sParse.pNewTrigger->pTabSchema); + int i2 = sqlite3FindDbName(db, zDb); + if( i1==i2 ) sqlite3_result_int(context, 1); + } + } + } + + if( rc!=SQLITE_OK ){ + renameColumnParseError(context, 1, argv[2], argv[3], &sParse); + } + renameParseCleanup(&sParse); + } + +#ifndef SQLITE_OMIT_AUTHORIZATION + db->xAuth = xAuth; +#endif +} + +/* +** Register built-in functions used to help implement ALTER TABLE +*/ +SQLITE_PRIVATE void sqlite3AlterFunctions(void){ + static FuncDef aAlterTableFuncs[] = { + INTERNAL_FUNCTION(sqlite_rename_column, 9, renameColumnFunc), + INTERNAL_FUNCTION(sqlite_rename_table, 7, renameTableFunc), + INTERNAL_FUNCTION(sqlite_rename_test, 5, renameTableTest), + }; + sqlite3InsertBuiltinFuncs(aAlterTableFuncs, ArraySize(aAlterTableFuncs)); +} #endif /* SQLITE_ALTER_TABLE */ /************** End of alter.c ***********************************************/ @@ -97912,6 +103313,10 @@ "DELETE FROM %Q.%s WHERE %s=%Q", pDb->zDbSName, zTab, zWhereType, zWhere ); +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + }else if( db->xPreUpdateCallback ){ + sqlite3NestedParse(pParse, "DELETE FROM %Q.%s", pDb->zDbSName, zTab); +#endif }else{ /* The sqlite_stat[134] table already exists. Delete all rows. */ sqlite3VdbeAddOp2(v, OP_Clear, aRoot[i], iDb); @@ -98159,6 +103564,7 @@ 0, /* pNext */ statInit, /* xSFunc */ 0, /* xFinalize */ + 0, 0, /* xValue, xInverse */ "stat_init", /* zName */ {0} }; @@ -98475,6 +103881,7 @@ 0, /* pNext */ statPush, /* xSFunc */ 0, /* xFinalize */ + 0, 0, /* xValue, xInverse */ "stat_push", /* zName */ {0} }; @@ -98626,6 +104033,7 @@ 0, /* pNext */ statGet, /* xSFunc */ 0, /* xFinalize */ + 0, 0, /* xValue, xInverse */ "stat_get", /* zName */ {0} }; @@ -98676,6 +104084,9 @@ int regIdxname = iMem++; /* Register containing index name */ int regStat1 = iMem++; /* Value for the stat column of sqlite_stat1 */ int regPrev = iMem; /* MUST BE LAST (see below) */ +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + Table *pStat1 = 0; +#endif pParse->nMem = MAX(pParse->nMem, iMem); v = sqlite3GetVdbe(pParse); @@ -98686,7 +104097,7 @@ /* Do not gather statistics on views or virtual tables */ return; } - if( sqlite3_strlike("sqlite_%", pTab->zName, 0)==0 ){ + if( sqlite3_strlike("sqlite\\_%", pTab->zName, '\\')==0 ){ /* Do not gather statistics on system tables */ return; } @@ -98701,6 +104112,18 @@ } #endif +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + if( db->xPreUpdateCallback ){ + pStat1 = (Table*)sqlite3DbMallocZero(db, sizeof(Table) + 13); + if( pStat1==0 ) return; + pStat1->zName = (char*)&pStat1[1]; + memcpy(pStat1->zName, "sqlite_stat1", 13); + pStat1->nCol = 3; + pStat1->iPKey = -1; + sqlite3VdbeAddOp4(pParse->pVdbe, OP_Noop, 0, 0, 0,(char*)pStat1,P4_DYNBLOB); + } +#endif + /* Establish a read-lock on the table at the shared-cache level. ** Open a read-only cursor on the table. Also allocate a cursor number ** to use for scanning indexes (iIdxCur). No index cursor is opened at @@ -98902,6 +104325,9 @@ sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regTemp, "BBB", 0); sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid); sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid); +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + sqlite3VdbeChangeP4(v, -1, (char*)pStat1, P4_TABLE); +#endif sqlite3VdbeChangeP5(v, OPFLAG_APPEND); /* Add the entries to the stat3 or stat4 table. */ @@ -98927,10 +104353,7 @@ callStatGet(v, regStat4, STAT_GET_NLT, regLt); callStatGet(v, regStat4, STAT_GET_NDLT, regDLt); sqlite3VdbeAddOp4Int(v, seekOp, iTabCur, addrNext, regSampleRowid, 0); - /* We know that the regSampleRowid row exists because it was read by - ** the previous loop. Thus the not-found jump of seekOp will never - ** be taken */ - VdbeCoverageNeverTaken(v); + VdbeCoverage(v); #ifdef SQLITE_ENABLE_STAT3 sqlite3ExprCodeLoadIndexColumn(pParse, pIdx, iTabCur, 0, regSample); #else @@ -98965,6 +104388,9 @@ sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid); sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid); sqlite3VdbeChangeP5(v, OPFLAG_APPEND); +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + sqlite3VdbeChangeP4(v, -1, (char*)pStat1, P4_TABLE); +#endif sqlite3VdbeJumpHere(v, jZeroRows); } } @@ -99567,7 +104993,7 @@ /* Load the statistics from the sqlite_stat4 table. */ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 - if( rc==SQLITE_OK && OptimizationEnabled(db, SQLITE_Stat34) ){ + if( rc==SQLITE_OK ){ db->lookaside.bDisable++; rc = loadStat4(db, sInfo.zDatabase); db->lookaside.bDisable--; @@ -99647,6 +105073,10 @@ ** ** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the ** third argument. +** +** If the db->init.reopenMemdb flags is set, then instead of attaching a +** new database, close the database on db->init.iDb and reopen it as an +** empty MemDB. */ static void attachFunc( sqlite3_context *context, @@ -99667,70 +105097,86 @@ sqlite3_vfs *pVfs; UNUSED_PARAMETER(NotUsed); - zFile = (const char *)sqlite3_value_text(argv[0]); zName = (const char *)sqlite3_value_text(argv[1]); if( zFile==0 ) zFile = ""; if( zName==0 ) zName = ""; - /* Check for the following errors: - ** - ** * Too many attached databases, - ** * Transaction currently open - ** * Specified database name already being used. - */ - if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){ - zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d", - db->aLimit[SQLITE_LIMIT_ATTACHED] - ); - goto attach_error; - } - if( !db->autoCommit ){ - zErrDyn = sqlite3MPrintf(db, "cannot ATTACH database within transaction"); - goto attach_error; - } - for(i=0; inDb; i++){ - char *z = db->aDb[i].zDbSName; - assert( z && zName ); - if( sqlite3StrICmp(z, zName)==0 ){ - zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName); +#ifdef SQLITE_ENABLE_DESERIALIZE +# define REOPEN_AS_MEMDB(db) (db->init.reopenMemdb) +#else +# define REOPEN_AS_MEMDB(db) (0) +#endif + + if( REOPEN_AS_MEMDB(db) ){ + /* This is not a real ATTACH. Instead, this routine is being called + ** from sqlite3_deserialize() to close database db->init.iDb and + ** reopen it as a MemDB */ + pVfs = sqlite3_vfs_find("memdb"); + if( pVfs==0 ) return; + pNew = &db->aDb[db->init.iDb]; + if( pNew->pBt ) sqlite3BtreeClose(pNew->pBt); + pNew->pBt = 0; + pNew->pSchema = 0; + rc = sqlite3BtreeOpen(pVfs, "x\0", db, &pNew->pBt, 0, SQLITE_OPEN_MAIN_DB); + }else{ + /* This is a real ATTACH + ** + ** Check for the following errors: + ** + ** * Too many attached databases, + ** * Transaction currently open + ** * Specified database name already being used. + */ + if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){ + zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d", + db->aLimit[SQLITE_LIMIT_ATTACHED] + ); goto attach_error; } + for(i=0; inDb; i++){ + char *z = db->aDb[i].zDbSName; + assert( z && zName ); + if( sqlite3StrICmp(z, zName)==0 ){ + zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName); + goto attach_error; + } + } + + /* Allocate the new entry in the db->aDb[] array and initialize the schema + ** hash tables. + */ + if( db->aDb==db->aDbStatic ){ + aNew = sqlite3DbMallocRawNN(db, sizeof(db->aDb[0])*3 ); + if( aNew==0 ) return; + memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2); + }else{ + aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) ); + if( aNew==0 ) return; + } + db->aDb = aNew; + pNew = &db->aDb[db->nDb]; + memset(pNew, 0, sizeof(*pNew)); + + /* Open the database file. If the btree is successfully opened, use + ** it to obtain the database schema. At this point the schema may + ** or may not be initialized. + */ + flags = db->openFlags; + rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ) sqlite3OomFault(db); + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); + return; + } + assert( pVfs ); + flags |= SQLITE_OPEN_MAIN_DB; + rc = sqlite3BtreeOpen(pVfs, zPath, db, &pNew->pBt, 0, flags); + sqlite3_free( zPath ); + db->nDb++; } - - /* Allocate the new entry in the db->aDb[] array and initialize the schema - ** hash tables. - */ - if( db->aDb==db->aDbStatic ){ - aNew = sqlite3DbMallocRawNN(db, sizeof(db->aDb[0])*3 ); - if( aNew==0 ) return; - memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2); - }else{ - aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) ); - if( aNew==0 ) return; - } - db->aDb = aNew; - pNew = &db->aDb[db->nDb]; - memset(pNew, 0, sizeof(*pNew)); - - /* Open the database file. If the btree is successfully opened, use - ** it to obtain the database schema. At this point the schema may - ** or may not be initialized. - */ - flags = db->openFlags; - rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr); - if( rc!=SQLITE_OK ){ - if( rc==SQLITE_NOMEM ) sqlite3OomFault(db); - sqlite3_result_error(context, zErr, -1); - sqlite3_free(zErr); - return; - } - assert( pVfs ); - flags |= SQLITE_OPEN_MAIN_DB; - rc = sqlite3BtreeOpen(pVfs, zPath, db, &pNew->pBt, 0, flags); - sqlite3_free( zPath ); - db->nDb++; - db->skipBtreeMutex = 0; + db->noSharedCache = 0; if( rc==SQLITE_CONSTRAINT ){ rc = SQLITE_ERROR; zErrDyn = sqlite3MPrintf(db, "database is already attached"); @@ -99756,7 +105202,7 @@ sqlite3BtreeLeave(pNew->pBt); } pNew->safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1; - pNew->zDbSName = sqlite3DbStrDup(db, zName); + if( !REOPEN_AS_MEMDB(db) ) pNew->zDbSName = sqlite3DbStrDup(db, zName); if( rc==SQLITE_OK && pNew->zDbSName==0 ){ rc = SQLITE_NOMEM_BKPT; } @@ -99796,13 +105242,16 @@ /* If the file was opened successfully, read the schema for the new database. ** If this fails, or if opening the file failed, then close the file and - ** remove the entry from the db->aDb[] array. i.e. put everything back the way - ** we found it. + ** remove the entry from the db->aDb[] array. i.e. put everything back the + ** way we found it. */ if( rc==SQLITE_OK ){ sqlite3BtreeEnterAll(db); + db->init.iDb = 0; + db->mDbFlags &= ~(DBFLAG_SchemaKnownOk); rc = sqlite3Init(db, &zErrDyn); sqlite3BtreeLeaveAll(db); + assert( zErrDyn==0 || rc!=SQLITE_OK ); } #ifdef SQLITE_USER_AUTHENTICATION if( rc==SQLITE_OK ){ @@ -99814,22 +105263,24 @@ } #endif if( rc ){ - int iDb = db->nDb - 1; - assert( iDb>=2 ); - if( db->aDb[iDb].pBt ){ - sqlite3BtreeClose(db->aDb[iDb].pBt); - db->aDb[iDb].pBt = 0; - db->aDb[iDb].pSchema = 0; + if( !REOPEN_AS_MEMDB(db) ){ + int iDb = db->nDb - 1; + assert( iDb>=2 ); + if( db->aDb[iDb].pBt ){ + sqlite3BtreeClose(db->aDb[iDb].pBt); + db->aDb[iDb].pBt = 0; + db->aDb[iDb].pSchema = 0; + } + sqlite3ResetAllSchemasOfConnection(db); + db->nDb = iDb; + if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ + sqlite3OomFault(db); + sqlite3DbFree(db, zErrDyn); + zErrDyn = sqlite3MPrintf(db, "out of memory"); + }else if( zErrDyn==0 ){ + zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile); + } } - sqlite3ResetAllSchemasOfConnection(db); - db->nDb = iDb; - if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ - sqlite3OomFault(db); - sqlite3DbFree(db, zErrDyn); - zErrDyn = sqlite3MPrintf(db, "out of memory"); - }else if( zErrDyn==0 ){ - zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile); - } goto attach_error; } @@ -99880,11 +105331,6 @@ sqlite3_snprintf(sizeof(zErr),zErr, "cannot detach database %s", zName); goto detach_error; } - if( !db->autoCommit ){ - sqlite3_snprintf(sizeof(zErr), zErr, - "cannot DETACH database within transaction"); - goto detach_error; - } if( sqlite3BtreeIsInReadTrans(pDb->pBt) || sqlite3BtreeIsInBackup(pDb->pBt) ){ sqlite3_snprintf(sizeof(zErr),zErr, "database %s is locked", zName); goto detach_error; @@ -99986,6 +105432,7 @@ 0, /* pNext */ detachFunc, /* xSFunc */ 0, /* xFinalize */ + 0, 0, /* xValue, xInverse */ "sqlite_detach", /* zName */ {0} }; @@ -100005,6 +105452,7 @@ 0, /* pNext */ attachFunc, /* xSFunc */ 0, /* xFinalize */ + 0, 0, /* xValue, xInverse */ "sqlite_attach", /* zName */ {0} }; @@ -100075,6 +105523,9 @@ if( sqlite3FixSelect(pFix, pItem->pSelect) ) return 1; if( sqlite3FixExpr(pFix, pItem->pOn) ) return 1; #endif + if( pItem->fg.isTabFunc && sqlite3FixExprList(pFix, pItem->u1.pFuncArg) ){ + return 1; + } } return 0; } @@ -100105,8 +105556,13 @@ if( sqlite3FixExpr(pFix, pSelect->pLimit) ){ return 1; } - if( sqlite3FixExpr(pFix, pSelect->pOffset) ){ - return 1; + if( pSelect->pWith ){ + int i; + for(i=0; ipWith->nCte; i++){ + if( sqlite3FixSelect(pFix, pSelect->pWith->a[i].pSelect) ){ + return 1; + } + } } pSelect = pSelect->pPrior; } @@ -100169,6 +105625,18 @@ if( sqlite3FixExprList(pFix, pStep->pExprList) ){ return 1; } +#ifndef SQLITE_OMIT_UPSERT + if( pStep->pUpsert ){ + Upsert *pUp = pStep->pUpsert; + if( sqlite3FixExprList(pFix, pUp->pUpsertTarget) + || sqlite3FixExpr(pFix, pUp->pUpsertTargetWhere) + || sqlite3FixExprList(pFix, pUp->pUpsertSet) + || sqlite3FixExpr(pFix, pUp->pUpsertWhere) + ){ + return 1; + } + } +#endif pStep = pStep->pNext; } return 0; @@ -100257,7 +105725,7 @@ sqlite3_mutex_enter(db->mutex); db->xAuth = (sqlite3_xauth)xAuth; db->pAuthArg = pArg; - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, 0); sqlite3_mutex_leave(db->mutex); return SQLITE_OK; } @@ -100297,11 +105765,9 @@ #endif ); if( rc==SQLITE_DENY ){ - if( db->nDb>2 || iDb!=0 ){ - sqlite3ErrorMsg(pParse, "access to %s.%s.%s is prohibited",zDb,zTab,zCol); - }else{ - sqlite3ErrorMsg(pParse, "access to %s.%s is prohibited", zTab, zCol); - } + char *z = sqlite3_mprintf("%s.%s", zTab, zCol); + if( db->nDb>2 || iDb!=0 ) z = sqlite3_mprintf("%s.%z", zDb, z); + sqlite3ErrorMsg(pParse, "access to %z is prohibited", z); pParse->rc = SQLITE_AUTH; }else if( rc!=SQLITE_IGNORE && rc!=SQLITE_OK ){ sqliteAuthBadReturnCode(pParse); @@ -100331,6 +105797,8 @@ int iDb; /* The index of the database the expression refers to */ int iCol; /* Index of column in table */ + assert( pExpr->op==TK_COLUMN || pExpr->op==TK_TRIGGER ); + assert( !IN_RENAME_OBJECT || db->xAuth==0 ); if( db->xAuth==0 ) return; iDb = sqlite3SchemaToIndex(pParse->db, pSchema); if( iDb<0 ){ @@ -100339,7 +105807,6 @@ return; } - assert( pExpr->op==TK_COLUMN || pExpr->op==TK_TRIGGER ); if( pExpr->op==TK_TRIGGER ){ pTab = pParse->pTriggerTab; }else{ @@ -100388,7 +105855,8 @@ /* Don't do any authorization checks if the database is initialising ** or if the parser is being invoked from within sqlite3_declare_vtab. */ - if( db->init.busy || IN_DECLARE_VTAB ){ + assert( !IN_RENAME_OBJECT || db->xAuth==0 ); + if( db->init.busy || IN_SPECIAL_PARSE ){ return SQLITE_OK; } @@ -100680,7 +106148,6 @@ /* Get the VDBE program ready for execution */ if( v && pParse->nErr==0 && !db->mallocFailed ){ - assert( pParse->iCacheLevel==0 ); /* Disables and re-enables match */ /* A minimum of one cursor is required if autoincrement is used * See ticket [a696379c1f08866] */ if( pParse->pAinc!=0 && pParse->nTab==0 ) pParse->nTab = 1; @@ -100798,29 +106265,30 @@ const char *zDbase /* Name of the database. Might be NULL */ ){ Table *p; + sqlite3 *db = pParse->db; /* Read the database schema. If an error occurs, leave an error message ** and code in pParse and return NULL. */ - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + if( (db->mDbFlags & DBFLAG_SchemaKnownOk)==0 + && SQLITE_OK!=sqlite3ReadSchema(pParse) + ){ return 0; } - p = sqlite3FindTable(pParse->db, zName, zDbase); + p = sqlite3FindTable(db, zName, zDbase); if( p==0 ){ const char *zMsg = flags & LOCATE_VIEW ? "no such view" : "no such table"; #ifndef SQLITE_OMIT_VIRTUALTABLE - if( sqlite3FindDbName(pParse->db, zDbase)<1 ){ - /* If zName is the not the name of a table in the schema created using - ** CREATE, then check to see if it is the name of an virtual table that - ** can be an eponymous virtual table. */ - Module *pMod = (Module*)sqlite3HashFind(&pParse->db->aModule, zName); - if( pMod==0 && sqlite3_strnicmp(zName, "pragma_", 7)==0 ){ - pMod = sqlite3PragmaVtabRegister(pParse->db, zName); - } - if( pMod && sqlite3VtabEponymousTableInit(pParse, pMod) ){ - return pMod->pEpoTab; - } + /* If zName is the not the name of a table in the schema created using + ** CREATE, then check to see if it is the name of an virtual table that + ** can be an eponymous virtual table. */ + Module *pMod = (Module*)sqlite3HashFind(&db->aModule, zName); + if( pMod==0 && sqlite3_strnicmp(zName, "pragma_", 7)==0 ){ + pMod = sqlite3PragmaVtabRegister(db, zName); } + if( pMod && sqlite3VtabEponymousTableInit(pParse, pMod) ){ + return pMod->pEpoTab; + } #endif if( (flags & LOCATE_NOERR)==0 ){ if( zDbase ){ @@ -100892,7 +106360,7 @@ /* ** Reclaim the memory used by an index */ -static void freeIndex(sqlite3 *db, Index *p){ +SQLITE_PRIVATE void sqlite3FreeIndex(sqlite3 *db, Index *p){ #ifndef SQLITE_OMIT_ANALYZE sqlite3DeleteIndexSamples(db, p); #endif @@ -100932,9 +106400,9 @@ p->pNext = pIndex->pNext; } } - freeIndex(db, pIndex); + sqlite3FreeIndex(db, pIndex); } - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; } /* @@ -100969,28 +106437,27 @@ /* ** Reset the schema for the database at index iDb. Also reset the -** TEMP schema. +** TEMP schema. The reset is deferred if db->nSchemaLock is not zero. +** Deferred resets may be run by calling with iDb<0. */ SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3 *db, int iDb){ - Db *pDb; + int i; assert( iDbnDb ); - /* Case 1: Reset the single schema identified by iDb */ - pDb = &db->aDb[iDb]; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - assert( pDb->pSchema!=0 ); - sqlite3SchemaClear(pDb->pSchema); + if( iDb>=0 ){ + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + DbSetProperty(db, iDb, DB_ResetWanted); + DbSetProperty(db, 1, DB_ResetWanted); + db->mDbFlags &= ~DBFLAG_SchemaKnownOk; + } - /* If any database other than TEMP is reset, then also reset TEMP - ** since TEMP might be holding triggers that reference tables in the - ** other database. - */ - if( iDb!=1 ){ - pDb = &db->aDb[1]; - assert( pDb->pSchema!=0 ); - sqlite3SchemaClear(pDb->pSchema); + if( db->nSchemaLock==0 ){ + for(i=0; inDb; i++){ + if( DbHasProperty(db, i, DB_ResetWanted) ){ + sqlite3SchemaClear(db->aDb[i].pSchema); + } + } } - return; } /* @@ -101003,13 +106470,19 @@ for(i=0; inDb; i++){ Db *pDb = &db->aDb[i]; if( pDb->pSchema ){ - sqlite3SchemaClear(pDb->pSchema); + if( db->nSchemaLock==0 ){ + sqlite3SchemaClear(pDb->pSchema); + }else{ + DbSetProperty(db, i, DB_ResetWanted); + } } } - db->flags &= ~SQLITE_InternChanges; + db->mDbFlags &= ~(DBFLAG_SchemaChange|DBFLAG_SchemaKnownOk); sqlite3VtabUnlockList(db); sqlite3BtreeLeaveAll(db); - sqlite3CollapseDatabaseArray(db); + if( db->nSchemaLock==0 ){ + sqlite3CollapseDatabaseArray(db); + } } /* @@ -101016,7 +106489,7 @@ ** This routine is called when a commit occurs. */ SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3 *db){ - db->flags &= ~SQLITE_InternChanges; + db->mDbFlags &= ~DBFLAG_SchemaChange; } /* @@ -101054,13 +106527,16 @@ */ static void SQLITE_NOINLINE deleteTable(sqlite3 *db, Table *pTable){ Index *pIndex, *pNext; - TESTONLY( int nLookaside; ) /* Used to verify lookaside not used for schema */ +#ifdef SQLITE_DEBUG /* Record the number of outstanding lookaside allocations in schema Tables ** prior to doing any free() operations. Since schema Tables do not use ** lookaside, this number should not change. */ - TESTONLY( nLookaside = (db && (pTable->tabFlags & TF_Ephemeral)==0) ? - db->lookaside.nOut : 0 ); + int nLookaside = 0; + if( db && (pTable->tabFlags & TF_Ephemeral)==0 ){ + nLookaside = sqlite3LookasideUsed(db, 0); + } +#endif /* Delete all indices associated with this table. */ for(pIndex = pTable->pIndex; pIndex; pIndex=pNext){ @@ -101075,7 +106551,7 @@ assert( db==0 || sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); assert( pOld==pIndex || pOld==0 ); } - freeIndex(db, pIndex); + sqlite3FreeIndex(db, pIndex); } /* Delete any foreign keys attached to this table. */ @@ -101083,6 +106559,12 @@ /* Delete the Table structure itself. */ +#ifdef SQLITE_ENABLE_NORMALIZE + if( pTable->pColHash ){ + sqlite3HashClear(pTable->pColHash); + sqlite3_free(pTable->pColHash); + } +#endif sqlite3DeleteColumnNames(db, pTable); sqlite3DbFree(db, pTable->zName); sqlite3DbFree(db, pTable->zColAff); @@ -101094,7 +106576,7 @@ sqlite3DbFree(db, pTable); /* Verify that no lookaside memory was used by schema tables */ - assert( nLookaside==0 || nLookaside==db->lookaside.nOut ); + assert( nLookaside==0 || nLookaside==sqlite3LookasideUsed(db,0) ); } SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3 *db, Table *pTable){ /* Do not delete the table until the reference count reaches zero. */ @@ -101120,7 +106602,7 @@ pDb = &db->aDb[iDb]; p = sqlite3HashInsert(&pDb->pSchema->tblHash, zTabName, 0); sqlite3DeleteTable(db, p); - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; } /* @@ -101233,7 +106715,8 @@ return -1; } }else{ - assert( db->init.iDb==0 || db->init.busy || (db->flags & SQLITE_Vacuum)!=0); + assert( db->init.iDb==0 || db->init.busy || IN_RENAME_OBJECT + || (db->mDbFlags & DBFLAG_Vacuum)!=0); iDb = db->init.iDb; *pUnqual = pName1; } @@ -101241,6 +106724,20 @@ } /* +** True if PRAGMA writable_schema is ON +*/ +SQLITE_PRIVATE int sqlite3WritableSchema(sqlite3 *db){ + testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))==0 ); + testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))== + SQLITE_WriteSchema ); + testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))== + SQLITE_Defensive ); + testcase( (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))== + (SQLITE_WriteSchema|SQLITE_Defensive) ); + return (db->flags&(SQLITE_WriteSchema|SQLITE_Defensive))==SQLITE_WriteSchema; +} + +/* ** This routine is used to check if the UTF-8 string zName is a legal ** unqualified name for a new schema object (table, index, view or ** trigger). All names are legal except those that begin with the string @@ -101249,7 +106746,7 @@ */ SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *pParse, const char *zName){ if( !pParse->db->init.busy && pParse->nested==0 - && (pParse->db->flags & SQLITE_WriteSchema)==0 + && sqlite3WritableSchema(pParse->db)==0 && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ sqlite3ErrorMsg(pParse, "object name reserved for internal use: %s", zName); return SQLITE_ERROR; @@ -101327,6 +106824,9 @@ } if( !OMIT_TEMPDB && isTemp ) iDb = 1; zName = sqlite3NameFromToken(db, pName); + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenMap(pParse, (void*)zName, pName); + } } pParse->sNameToken = *pName; if( zName==0 ) return; @@ -101362,7 +106862,7 @@ ** and types will be used, so there is no need to test for namespace ** collisions. */ - if( !IN_DECLARE_VTAB ){ + if( !IN_SPECIAL_PARSE ){ char *zDb = db->aDb[iDb].zDbSName; if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ goto begin_table_error; @@ -101465,7 +106965,8 @@ }else #endif { - pParse->addrCrTab = sqlite3VdbeAddOp2(v, OP_CreateTable, iDb, reg2); + pParse->addrCrTab = + sqlite3VdbeAddOp3(v, OP_CreateBtree, iDb, reg2, BTREE_INTKEY); } sqlite3OpenMasterTable(pParse, iDb); sqlite3VdbeAddOp2(v, OP_NewRowid, 0, reg1); @@ -101514,14 +107015,13 @@ Column *pCol; sqlite3 *db = pParse->db; if( (p = pParse->pNewTable)==0 ) return; -#if SQLITE_MAX_COLUMN if( p->nCol+1>db->aLimit[SQLITE_LIMIT_COLUMN] ){ sqlite3ErrorMsg(pParse, "too many columns on %s", p->zName); return; } -#endif z = sqlite3DbMallocRaw(db, pName->n + pType->n + 2); if( z==0 ) return; + if( IN_RENAME_OBJECT ) sqlite3RenameTokenMap(pParse, (void*)z, pName); memcpy(z, pName->z, pName->n); z[pName->n] = 0; sqlite3Dequote(z); @@ -101548,15 +107048,20 @@ if( pType->n==0 ){ /* If there is no type specified, columns have the default affinity - ** 'BLOB'. */ + ** 'BLOB' with a default size of 4 bytes. */ pCol->affinity = SQLITE_AFF_BLOB; pCol->szEst = 1; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( 4>=sqlite3GlobalConfig.szSorterRef ){ + pCol->colFlags |= COLFLAG_SORTERREF; + } +#endif }else{ zType = z + sqlite3Strlen30(z) + 1; memcpy(zType, pType->z, pType->n); zType[pType->n] = 0; sqlite3Dequote(zType); - pCol->affinity = sqlite3AffinityType(zType, &pCol->szEst); + pCol->affinity = sqlite3AffinityType(zType, pCol); pCol->colFlags |= COLFLAG_HASTYPE; } p->nCol++; @@ -101571,10 +107076,24 @@ */ SQLITE_PRIVATE void sqlite3AddNotNull(Parse *pParse, int onError){ Table *p; + Column *pCol; p = pParse->pNewTable; if( p==0 || NEVER(p->nCol<1) ) return; - p->aCol[p->nCol-1].notNull = (u8)onError; + pCol = &p->aCol[p->nCol-1]; + pCol->notNull = (u8)onError; p->tabFlags |= TF_HasNotNull; + + /* Set the uniqNotNull flag on any UNIQUE or PK indexes already created + ** on this column. */ + if( pCol->colFlags & COLFLAG_UNIQUE ){ + Index *pIdx; + for(pIdx=p->pIndex; pIdx; pIdx=pIdx->pNext){ + assert( pIdx->nKeyCol==1 && pIdx->onError!=OE_None ); + if( pIdx->aiColumn[0]==p->nCol-1 ){ + pIdx->uniqNotNull = 1; + } + } + } } /* @@ -101602,7 +107121,7 @@ ** If none of the substrings in the above table are found, ** SQLITE_AFF_NUMERIC is returned. */ -SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn, u8 *pszEst){ +SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn, Column *pCol){ u32 h = 0; char aff = SQLITE_AFF_NUMERIC; const char *zChar = 0; @@ -101639,27 +107158,32 @@ } } - /* If pszEst is not NULL, store an estimate of the field size. The + /* If pCol is not NULL, store an estimate of the field size. The ** estimate is scaled so that the size of an integer is 1. */ - if( pszEst ){ - *pszEst = 1; /* default size is approx 4 bytes */ + if( pCol ){ + int v = 0; /* default size is approx 4 bytes */ if( aff r=(k/4+1) */ sqlite3GetInt32(zChar, &v); - v = v/4 + 1; - if( v>255 ) v = 255; - *pszEst = v; /* BLOB(k), VARCHAR(k), CHAR(k) -> r=(k/4+1) */ break; } zChar++; } }else{ - *pszEst = 5; /* BLOB, TEXT, CLOB -> r=5 (approx 20 bytes)*/ + v = 16; /* BLOB, TEXT, CLOB -> r=5 (approx 20 bytes)*/ } } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( v>=sqlite3GlobalConfig.szSorterRef ){ + pCol->colFlags |= COLFLAG_SORTERREF; + } +#endif + v = v/4 + 1; + if( v>255 ) v = 255; + pCol->szEst = v; } return aff; } @@ -101674,7 +107198,12 @@ ** This routine is called by the parser while in the middle of ** parsing a CREATE TABLE statement. */ -SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse *pParse, ExprSpan *pSpan){ +SQLITE_PRIVATE void sqlite3AddDefaultValue( + Parse *pParse, /* Parsing context */ + Expr *pExpr, /* The parsed expression of the default value */ + const char *zStart, /* Start of the default value text */ + const char *zEnd /* First character past end of defaut value text */ +){ Table *p; Column *pCol; sqlite3 *db = pParse->db; @@ -101681,27 +107210,28 @@ p = pParse->pNewTable; if( p!=0 ){ pCol = &(p->aCol[p->nCol-1]); - if( !sqlite3ExprIsConstantOrFunction(pSpan->pExpr, db->init.busy) ){ + if( !sqlite3ExprIsConstantOrFunction(pExpr, db->init.busy) ){ sqlite3ErrorMsg(pParse, "default value of column [%s] is not constant", pCol->zName); }else{ /* A copy of pExpr is used instead of the original, as pExpr contains - ** tokens that point to volatile memory. The 'span' of the expression - ** is required by pragma table_info. + ** tokens that point to volatile memory. */ Expr x; sqlite3ExprDelete(db, pCol->pDflt); memset(&x, 0, sizeof(x)); x.op = TK_SPAN; - x.u.zToken = sqlite3DbStrNDup(db, (char*)pSpan->zStart, - (int)(pSpan->zEnd - pSpan->zStart)); - x.pLeft = pSpan->pExpr; + x.u.zToken = sqlite3DbSpanDup(db, zStart, zEnd); + x.pLeft = pExpr; x.flags = EP_Skip; pCol->pDflt = sqlite3ExprDup(db, &x, EXPRDUP_REDUCE); sqlite3DbFree(db, x.u.zToken); } } - sqlite3ExprDelete(db, pSpan->pExpr); + if( IN_RENAME_OBJECT ){ + sqlite3RenameExprUnmap(pParse, pExpr); + } + sqlite3ExprDelete(db, pExpr); } /* @@ -101792,6 +107322,9 @@ && sqlite3StrICmp(sqlite3ColumnType(pCol,""), "INTEGER")==0 && sortOrder!=SQLITE_SO_DESC ){ + if( IN_RENAME_OBJECT && pList ){ + sqlite3RenameTokenRemap(pParse, &pTab->iPKey, pList->a[0].pExpr); + } pTab->iPKey = iCol; pTab->keyConf = (u8)onError; assert( autoInc==0 || autoInc==1 ); @@ -101932,7 +107465,7 @@ Vdbe *v = pParse->pVdbe; assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_SCHEMA_VERSION, - db->aDb[iDb].pSchema->schema_cookie+1); + (int)(1+(unsigned)db->aDb[iDb].pSchema->schema_cookie)); } /* @@ -102117,6 +107650,31 @@ return 0; } +/* Recompute the colNotIdxed field of the Index. +** +** colNotIdxed is a bitmask that has a 0 bit representing each indexed +** columns that are within the first 63 columns of the table. The +** high-order bit of colNotIdxed is always 1. All unindexed columns +** of the table have a 1. +** +** The colNotIdxed mask is AND-ed with the SrcList.a[].colUsed mask +** to determine if the index is covering index. +*/ +static void recomputeColumnsNotIndexed(Index *pIdx){ + Bitmask m = 0; + int j; + for(j=pIdx->nColumn-1; j>=0; j--){ + int x = pIdx->aiColumn[j]; + if( x>=0 ){ + testcase( x==BMS-1 ); + testcase( x==BMS-2 ); + if( xcolNotIdxed = ~m; + assert( (pIdx->colNotIdxed>>63)==1 ); +} + /* ** This routine runs at the end of parsing a CREATE TABLE statement that ** has a WITHOUT ROWID clause. The job of this routine is to convert both @@ -102125,9 +107683,8 @@ ** Changes include: ** ** (1) Set all columns of the PRIMARY KEY schema object to be NOT NULL. -** (2) Convert the OP_CreateTable into an OP_CreateIndex. There is -** no rowid btree for a WITHOUT ROWID. Instead, the canonical -** data storage is a covering index btree. +** (2) Convert P3 parameter of the OP_CreateBtree from BTREE_INTKEY +** into BTREE_BLOBKEY. ** (3) Bypass the creation of the sqlite_master table entry ** for the PRIMARY KEY as the primary key index is now ** identified by the sqlite_master table entry of the table itself. @@ -102135,7 +107692,7 @@ ** schema to the rootpage from the main table. ** (5) Add all table columns to the PRIMARY KEY Index object ** so that the PRIMARY KEY is a covering index. The surplus -** columns are part of KeyInfo.nXField and are not used for +** columns are part of KeyInfo.nAllField and are not used for ** sorting or lookup or uniqueness checks. ** (6) Replace the rowid tail on all automatically generated UNIQUE ** indices with the PRIMARY KEY columns. @@ -102160,17 +107717,12 @@ } } - /* The remaining transformations only apply to b-tree tables, not to - ** virtual tables */ - if( IN_DECLARE_VTAB ) return; - - /* Convert the OP_CreateTable opcode that would normally create the - ** root-page for the table into an OP_CreateIndex opcode. The index - ** created will become the PRIMARY KEY index. + /* Convert the P3 operand of the OP_CreateBtree opcode from BTREE_INTKEY + ** into BTREE_BLOBKEY. */ if( pParse->addrCrTab ){ assert( v ); - sqlite3VdbeChangeOpcode(v, pParse->addrCrTab, OP_CreateIndex); + sqlite3VdbeChangeP3(v, pParse->addrCrTab, BTREE_BLOBKEY); } /* Locate the PRIMARY KEY index. Or, if this table was originally @@ -102187,7 +107739,7 @@ assert( pParse->pNewTable==pTab ); sqlite3CreateIndex(pParse, 0, 0, 0, pList, pTab->keyConf, 0, 0, 0, 0, SQLITE_IDXTYPE_PRIMARYKEY); - if( db->mallocFailed ) return; + if( db->mallocFailed || pParse->nErr ) return; pPk = sqlite3PrimaryKeyIndex(pTab); pTab->iPKey = -1; }else{ @@ -102267,9 +107819,40 @@ }else{ pPk->nColumn = pTab->nCol; } + recomputeColumnsNotIndexed(pPk); } +#ifndef SQLITE_OMIT_VIRTUALTABLE /* +** Return true if zName is a shadow table name in the current database +** connection. +** +** zName is temporarily modified while this routine is running, but is +** restored to its original value prior to this routine returning. +*/ +static int isShadowTableName(sqlite3 *db, char *zName){ + char *zTail; /* Pointer to the last "_" in zName */ + Table *pTab; /* Table that zName is a shadow of */ + Module *pMod; /* Module for the virtual table */ + + zTail = strrchr(zName, '_'); + if( zTail==0 ) return 0; + *zTail = 0; + pTab = sqlite3FindTable(db, zName, 0); + *zTail = '_'; + if( pTab==0 ) return 0; + if( !IsVirtual(pTab) ) return 0; + pMod = (Module*)sqlite3HashFind(&db->aModule, pTab->azModuleArg[0]); + if( pMod==0 ) return 0; + if( pMod->pModule->iVersion<3 ) return 0; + if( pMod->pModule->xShadowName==0 ) return 0; + return pMod->pModule->xShadowName(zTail+1); +} +#else +# define isShadowTableName(x,y) 0 +#endif /* ifndef SQLITE_OMIT_VIRTUALTABLE */ + +/* ** This routine is called to report the final ")" that terminates ** a CREATE TABLE statement. ** @@ -102308,7 +107891,9 @@ p = pParse->pNewTable; if( p==0 ) return; - assert( !db->init.busy || !pSelect ); + if( pSelect==0 && isShadowTableName(db, p->zName) ){ + p->tabFlags |= TF_Shadow; + } /* If the db->init.busy is 1 it means we are reading the SQL off the ** "sqlite_master" or "sqlite_temp_master" table on the disk. @@ -102320,6 +107905,10 @@ ** table itself. So mark it read-only. */ if( db->init.busy ){ + if( pSelect ){ + sqlite3ErrorMsg(pParse, ""); + return; + } p->tnum = db->init.newTnum; if( p->tnum==1 ) p->tabFlags |= TF_Readonly; } @@ -102420,10 +108009,6 @@ pParse->nTab = 2; addrTop = sqlite3VdbeCurrentAddr(v) + 1; sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, addrTop); - sqlite3SelectDestInit(&dest, SRT_Coroutine, regYield); - sqlite3Select(pParse, pSelect, &dest); - sqlite3VdbeEndCoroutine(v, regYield); - sqlite3VdbeJumpHere(v, addrTop - 1); if( pParse->nErr ) return; pSelTab = sqlite3ResultSetOfSelect(pParse, pSelect); if( pSelTab==0 ) return; @@ -102433,6 +108018,11 @@ pSelTab->nCol = 0; pSelTab->aCol = 0; sqlite3DeleteTable(db, pSelTab); + sqlite3SelectDestInit(&dest, SRT_Coroutine, regYield); + sqlite3Select(pParse, pSelect, &dest); + if( pParse->nErr ) return; + sqlite3VdbeEndCoroutine(v, regYield); + sqlite3VdbeJumpHere(v, addrTop - 1); addrInsLoop = sqlite3VdbeAddOp1(v, OP_Yield, dest.iSDParm); VdbeCoverage(v); sqlite3VdbeAddOp3(v, OP_MakeRecord, dest.iSdst, dest.nSdst, regRec); @@ -102510,7 +108100,7 @@ return; } pParse->pNewTable = 0; - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; #ifndef SQLITE_OMIT_ALTERTABLE if( !p->pSelect ){ @@ -102567,7 +108157,12 @@ ** allocated rather than point to the input string - which means that ** they will persist after the current sqlite3_exec() call returns. */ - p->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); + if( IN_RENAME_OBJECT ){ + p->pSelect = pSelect; + pSelect = 0; + }else{ + p->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); + } p->pCheck = sqlite3ExprListDup(db, pCNames, EXPRDUP_REDUCE); if( db->mallocFailed ) goto create_view_fail; @@ -102575,7 +108170,7 @@ ** the end. */ sEnd = pParse->sLastToken; - assert( sEnd.z[0]!=0 ); + assert( sEnd.z[0]!=0 || sEnd.n==0 ); if( sEnd.z[0]!=';' ){ sEnd.z += sEnd.n; } @@ -102592,6 +108187,9 @@ create_view_fail: sqlite3SelectDelete(db, pSelect); + if( IN_RENAME_OBJECT ){ + sqlite3RenameExprlistUnmap(pParse, pCNames); + } sqlite3ExprListDelete(db, pCNames); return; } @@ -102609,6 +108207,9 @@ int nErr = 0; /* Number of errors encountered */ int n; /* Temporarily holds the number of cursors assigned */ sqlite3 *db = pParse->db; /* Database connection for malloc errors */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + int rc; +#endif #ifndef SQLITE_OMIT_AUTHORIZATION sqlite3_xauth xAuth; /* Saved xAuth pointer */ #endif @@ -102616,8 +108217,11 @@ assert( pTable ); #ifndef SQLITE_OMIT_VIRTUALTABLE - if( sqlite3VtabCallConnect(pParse, pTable) ){ - return SQLITE_ERROR; + db->nSchemaLock++; + rc = sqlite3VtabCallConnect(pParse, pTable); + db->nSchemaLock--; + if( rc ){ + return 1; } if( IsVirtual(pTable) ) return 0; #endif @@ -102659,6 +108263,10 @@ assert( pTable->pSelect ); pSel = sqlite3SelectDup(db, pTable->pSelect, 0); if( pSel ){ +#ifndef SQLITE_OMIT_ALTERTABLE + u8 eParseMode = pParse->eParseMode; + pParse->eParseMode = PARSE_MODE_NORMAL; +#endif n = pParse->nTab; sqlite3SrcListAssignCursors(pParse, pSel->pSrc); pTable->nCol = -1; @@ -102704,10 +108312,18 @@ sqlite3DeleteTable(db, pSelTab); sqlite3SelectDelete(db, pSel); db->lookaside.bDisable--; +#ifndef SQLITE_OMIT_ALTERTABLE + pParse->eParseMode = eParseMode; +#endif } else { nErr++; } pTable->pSchema->schemaFlags |= DB_UnresetViews; + if( db->mallocFailed ){ + sqlite3DeleteColumnNames(db, pTable); + pTable->aCol = 0; + pTable->nCol = 0; + } #endif /* SQLITE_OMIT_VIEW */ return nErr; } @@ -102786,7 +108402,7 @@ static void destroyRootPage(Parse *pParse, int iTable, int iDb){ Vdbe *v = sqlite3GetVdbe(pParse); int r1 = sqlite3GetTempReg(pParse); - assert( iTable>1 ); + if( iTable<2 ) sqlite3ErrorMsg(pParse, "corrupt schema"); sqlite3VdbeAddOp3(v, OP_Destroy, iTable, r1, iDb); sqlite3MayAbort(pParse); #ifndef SQLITE_OMIT_AUTOVACUUM @@ -102813,14 +108429,6 @@ ** is also added (this can happen with an auto-vacuum database). */ static void destroyTable(Parse *pParse, Table *pTab){ -#ifdef SQLITE_OMIT_AUTOVACUUM - Index *pIdx; - int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - destroyRootPage(pParse, pTab->tnum, iDb); - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - destroyRootPage(pParse, pIdx->tnum, iDb); - } -#else /* If the database may be auto-vacuum capable (if SQLITE_OMIT_AUTOVACUUM ** is not defined), then it is important to call OP_Destroy on the ** table and index root-pages in order, starting with the numerically @@ -102863,7 +108471,6 @@ iDestroyed = iLargest; } } -#endif } /* @@ -103055,8 +108662,10 @@ v = sqlite3GetVdbe(pParse); if( v ){ sqlite3BeginWriteOperation(pParse, 1, iDb); - sqlite3ClearStatTables(pParse, iDb, "tbl", pTab->zName); - sqlite3FkDropTable(pParse, pName, pTab); + if( !isView ){ + sqlite3ClearStatTables(pParse, iDb, "tbl", pTab->zName); + sqlite3FkDropTable(pParse, pName, pTab); + } sqlite3CodeDropTable(pParse, pTab, iDb, isView); } @@ -103131,6 +108740,9 @@ pFKey->pNextFrom = p->pFKey; z = (char*)&pFKey->aCol[nCol]; pFKey->zTo = z; + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenMap(pParse, (void*)z, pTo); + } memcpy(z, pTo->z, pTo->n); z[pTo->n] = 0; sqlite3Dequote(z); @@ -103153,6 +108765,9 @@ pFromCol->a[i].zName); goto fk_end; } + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenRemap(pParse, &pFKey->aCol[i], pFromCol->a[i].zName); + } } } if( pToCol ){ @@ -103159,6 +108774,9 @@ for(i=0; ia[i].zName); pFKey->aCol[i].zCol = z; + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenRemap(pParse, z, pToCol->a[i].zName); + } memcpy(z, pToCol->a[i].zName, n); z[n] = 0; z += n+1; @@ -103267,6 +108885,7 @@ sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead); addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iTab, 0); VdbeCoverage(v); regRecord = sqlite3GetTempReg(pParse); + sqlite3MultiWrite(pParse); sqlite3GenerateIndexKey(pParse,pIndex,iTab,regRecord,0,&iPartIdxLabel,0,0); sqlite3VdbeAddOp2(v, OP_SorterInsert, iSorter, regRecord); @@ -103280,17 +108899,18 @@ addr1 = sqlite3VdbeAddOp2(v, OP_SorterSort, iSorter, 0); VdbeCoverage(v); if( IsUniqueIndex(pIndex) ){ - int j2 = sqlite3VdbeCurrentAddr(v) + 3; - sqlite3VdbeGoto(v, j2); + int j2 = sqlite3VdbeGoto(v, 1); addr2 = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeVerifyAbortable(v, OE_Abort); sqlite3VdbeAddOp4Int(v, OP_SorterCompare, iSorter, j2, regRecord, pIndex->nKeyCol); VdbeCoverage(v); sqlite3UniqueConstraint(pParse, OE_Abort, pIndex); + sqlite3VdbeJumpHere(v, j2); }else{ addr2 = sqlite3VdbeCurrentAddr(v); } sqlite3VdbeAddOp3(v, OP_SorterData, iSorter, regRecord, iIdx); - sqlite3VdbeAddOp3(v, OP_Last, iIdx, 0, -1); + sqlite3VdbeAddOp1(v, OP_SeekEnd, iIdx); sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdx, regRecord); sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); sqlite3ReleaseTempReg(pParse, regRecord); @@ -103448,7 +109068,11 @@ #if SQLITE_USER_AUTHENTICATION && sqlite3UserAuthTable(pTab->zName)==0 #endif - && sqlite3StrNICmp(&pTab->zName[7],"altertab_",9)!=0 ){ +#ifdef SQLITE_ALLOW_SQLITE_MASTER_INDEX + && sqlite3StrICmp(&pTab->zName[7],"master")!=0 +#endif + && sqlite3StrNICmp(&pTab->zName[7],"altertab_",9)!=0 + ){ sqlite3ErrorMsg(pParse, "table %s may not be indexed", pTab->zName); goto exit_create_index; } @@ -103485,21 +109109,23 @@ if( SQLITE_OK!=sqlite3CheckObjectName(pParse, zName) ){ goto exit_create_index; } - if( !db->init.busy ){ - if( sqlite3FindTable(db, zName, 0)!=0 ){ - sqlite3ErrorMsg(pParse, "there is already a table named %s", zName); + if( !IN_RENAME_OBJECT ){ + if( !db->init.busy ){ + if( sqlite3FindTable(db, zName, 0)!=0 ){ + sqlite3ErrorMsg(pParse, "there is already a table named %s", zName); + goto exit_create_index; + } + } + if( sqlite3FindIndex(db, zName, pDb->zDbSName)!=0 ){ + if( !ifNotExist ){ + sqlite3ErrorMsg(pParse, "index %s already exists", zName); + }else{ + assert( !db->init.busy ); + sqlite3CodeVerifySchema(pParse, iDb); + } goto exit_create_index; } } - if( sqlite3FindIndex(db, zName, pDb->zDbSName)!=0 ){ - if( !ifNotExist ){ - sqlite3ErrorMsg(pParse, "index %s already exists", zName); - }else{ - assert( !db->init.busy ); - sqlite3CodeVerifySchema(pParse, iDb); - } - goto exit_create_index; - } }else{ int n; Index *pLoop; @@ -103514,13 +109140,13 @@ ** The following statement converts "sqlite3_autoindex..." into ** "sqlite3_butoindex..." in order to make the names distinct. ** The "vtab_err.test" test demonstrates the need of this statement. */ - if( IN_DECLARE_VTAB ) zName[7]++; + if( IN_SPECIAL_PARSE ) zName[7]++; } /* Check for authorization to create an index. */ #ifndef SQLITE_OMIT_AUTHORIZATION - { + if( !IN_RENAME_OBJECT ){ const char *zDb = pDb->zDbSName; if( sqlite3AuthCheck(pParse, SQLITE_INSERT, SCHEMA_TABLE(iDb), 0, zDb) ){ goto exit_create_index; @@ -103539,7 +109165,9 @@ */ if( pList==0 ){ Token prevCol; - sqlite3TokenInit(&prevCol, pTab->aCol[pTab->nCol-1].zName); + Column *pCol = &pTab->aCol[pTab->nCol-1]; + pCol->colFlags |= COLFLAG_UNIQUE; + sqlite3TokenInit(&prevCol, pCol->zName); pList = sqlite3ExprListAppend(pParse, 0, sqlite3ExprAlloc(db, TK_ID, &prevCol, 0)); if( pList==0 ) goto exit_create_index; @@ -103605,7 +109233,12 @@ ** TODO: Issue a warning if the table primary key is used as part of the ** index key. */ - for(i=0, pListItem=pList->a; inExpr; i++, pListItem++){ + pListItem = pList->a; + if( IN_RENAME_OBJECT ){ + pIndex->aColExpr = pList; + pList = 0; + } + for(i=0; inKeyCol; i++, pListItem++){ Expr *pCExpr; /* The i-th index expression */ int requestedSortOrder; /* ASC or DESC on the i-th expression */ const char *zColl; /* Collation sequence name */ @@ -103621,12 +109254,8 @@ goto exit_create_index; } if( pIndex->aColExpr==0 ){ - ExprList *pCopy = sqlite3ExprListDup(db, pList, 0); - pIndex->aColExpr = pCopy; - if( !db->mallocFailed ){ - assert( pCopy!=0 ); - pListItem = &pCopy->a[i]; - } + pIndex->aColExpr = pList; + pList = 0; } j = XN_EXPR; pIndex->aiColumn[i] = XN_EXPR; @@ -103692,6 +109321,7 @@ ** it as a covering index */ assert( HasRowid(pTab) || pTab->iPKey<0 || sqlite3ColumnOfIndex(pIndex, pTab->iPKey)>=0 ); + recomputeColumnsNotIndexed(pIndex); if( pTblName!=0 && pIndex->nColumn>=pTab->nCol ){ pIndex->isCovering = 1; for(j=0; jnCol; j++){ @@ -103764,98 +109394,101 @@ } } - /* Link the new Index structure to its table and to the other - ** in-memory database structures. - */ - assert( pParse->nErr==0 ); - if( db->init.busy ){ - Index *p; - assert( !IN_DECLARE_VTAB ); - assert( sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); - p = sqlite3HashInsert(&pIndex->pSchema->idxHash, - pIndex->zName, pIndex); - if( p ){ - assert( p==pIndex ); /* Malloc must have failed */ - sqlite3OomFault(db); - goto exit_create_index; + if( !IN_RENAME_OBJECT ){ + + /* Link the new Index structure to its table and to the other + ** in-memory database structures. + */ + assert( pParse->nErr==0 ); + if( db->init.busy ){ + Index *p; + assert( !IN_SPECIAL_PARSE ); + assert( sqlite3SchemaMutexHeld(db, 0, pIndex->pSchema) ); + p = sqlite3HashInsert(&pIndex->pSchema->idxHash, + pIndex->zName, pIndex); + if( p ){ + assert( p==pIndex ); /* Malloc must have failed */ + sqlite3OomFault(db); + goto exit_create_index; + } + db->mDbFlags |= DBFLAG_SchemaChange; + if( pTblName!=0 ){ + pIndex->tnum = db->init.newTnum; + } } - db->flags |= SQLITE_InternChanges; - if( pTblName!=0 ){ - pIndex->tnum = db->init.newTnum; - } - } - /* If this is the initial CREATE INDEX statement (or CREATE TABLE if the - ** index is an implied index for a UNIQUE or PRIMARY KEY constraint) then - ** emit code to allocate the index rootpage on disk and make an entry for - ** the index in the sqlite_master table and populate the index with - ** content. But, do not do this if we are simply reading the sqlite_master - ** table to parse the schema, or if this index is the PRIMARY KEY index - ** of a WITHOUT ROWID table. - ** - ** If pTblName==0 it means this index is generated as an implied PRIMARY KEY - ** or UNIQUE index in a CREATE TABLE statement. Since the table - ** has just been created, it contains no data and the index initialization - ** step can be skipped. - */ - else if( HasRowid(pTab) || pTblName!=0 ){ - Vdbe *v; - char *zStmt; - int iMem = ++pParse->nMem; + /* If this is the initial CREATE INDEX statement (or CREATE TABLE if the + ** index is an implied index for a UNIQUE or PRIMARY KEY constraint) then + ** emit code to allocate the index rootpage on disk and make an entry for + ** the index in the sqlite_master table and populate the index with + ** content. But, do not do this if we are simply reading the sqlite_master + ** table to parse the schema, or if this index is the PRIMARY KEY index + ** of a WITHOUT ROWID table. + ** + ** If pTblName==0 it means this index is generated as an implied PRIMARY KEY + ** or UNIQUE index in a CREATE TABLE statement. Since the table + ** has just been created, it contains no data and the index initialization + ** step can be skipped. + */ + else if( HasRowid(pTab) || pTblName!=0 ){ + Vdbe *v; + char *zStmt; + int iMem = ++pParse->nMem; - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto exit_create_index; + v = sqlite3GetVdbe(pParse); + if( v==0 ) goto exit_create_index; - sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3BeginWriteOperation(pParse, 1, iDb); - /* Create the rootpage for the index using CreateIndex. But before - ** doing so, code a Noop instruction and store its address in - ** Index.tnum. This is required in case this index is actually a - ** PRIMARY KEY and the table is actually a WITHOUT ROWID table. In - ** that case the convertToWithoutRowidTable() routine will replace - ** the Noop with a Goto to jump over the VDBE code generated below. */ - pIndex->tnum = sqlite3VdbeAddOp0(v, OP_Noop); - sqlite3VdbeAddOp2(v, OP_CreateIndex, iDb, iMem); + /* Create the rootpage for the index using CreateIndex. But before + ** doing so, code a Noop instruction and store its address in + ** Index.tnum. This is required in case this index is actually a + ** PRIMARY KEY and the table is actually a WITHOUT ROWID table. In + ** that case the convertToWithoutRowidTable() routine will replace + ** the Noop with a Goto to jump over the VDBE code generated below. */ + pIndex->tnum = sqlite3VdbeAddOp0(v, OP_Noop); + sqlite3VdbeAddOp3(v, OP_CreateBtree, iDb, iMem, BTREE_BLOBKEY); - /* Gather the complete text of the CREATE INDEX statement into - ** the zStmt variable - */ - if( pStart ){ - int n = (int)(pParse->sLastToken.z - pName->z) + pParse->sLastToken.n; - if( pName->z[n-1]==';' ) n--; - /* A named index with an explicit CREATE INDEX statement */ - zStmt = sqlite3MPrintf(db, "CREATE%s INDEX %.*s", - onError==OE_None ? "" : " UNIQUE", n, pName->z); - }else{ - /* An automatic index created by a PRIMARY KEY or UNIQUE constraint */ - /* zStmt = sqlite3MPrintf(""); */ - zStmt = 0; - } + /* Gather the complete text of the CREATE INDEX statement into + ** the zStmt variable + */ + if( pStart ){ + int n = (int)(pParse->sLastToken.z - pName->z) + pParse->sLastToken.n; + if( pName->z[n-1]==';' ) n--; + /* A named index with an explicit CREATE INDEX statement */ + zStmt = sqlite3MPrintf(db, "CREATE%s INDEX %.*s", + onError==OE_None ? "" : " UNIQUE", n, pName->z); + }else{ + /* An automatic index created by a PRIMARY KEY or UNIQUE constraint */ + /* zStmt = sqlite3MPrintf(""); */ + zStmt = 0; + } - /* Add an entry in sqlite_master for this index - */ - sqlite3NestedParse(pParse, - "INSERT INTO %Q.%s VALUES('index',%Q,%Q,#%d,%Q);", - db->aDb[iDb].zDbSName, MASTER_NAME, - pIndex->zName, - pTab->zName, - iMem, - zStmt - ); - sqlite3DbFree(db, zStmt); + /* Add an entry in sqlite_master for this index + */ + sqlite3NestedParse(pParse, + "INSERT INTO %Q.%s VALUES('index',%Q,%Q,#%d,%Q);", + db->aDb[iDb].zDbSName, MASTER_NAME, + pIndex->zName, + pTab->zName, + iMem, + zStmt + ); + sqlite3DbFree(db, zStmt); - /* Fill the index with data and reparse the schema. Code an OP_Expire - ** to invalidate all pre-compiled statements. - */ - if( pTblName ){ - sqlite3RefillIndex(pParse, pIndex, iMem); - sqlite3ChangeCookie(pParse, iDb); - sqlite3VdbeAddParseSchemaOp(v, iDb, - sqlite3MPrintf(db, "name='%q' AND type='index'", pIndex->zName)); - sqlite3VdbeAddOp0(v, OP_Expire); + /* Fill the index with data and reparse the schema. Code an OP_Expire + ** to invalidate all pre-compiled statements. + */ + if( pTblName ){ + sqlite3RefillIndex(pParse, pIndex, iMem); + sqlite3ChangeCookie(pParse, iDb); + sqlite3VdbeAddParseSchemaOp(v, iDb, + sqlite3MPrintf(db, "name='%q' AND type='index'", pIndex->zName)); + sqlite3VdbeAddOp2(v, OP_Expire, 0, 1); + } + + sqlite3VdbeJumpHere(v, pIndex->tnum); } - - sqlite3VdbeJumpHere(v, pIndex->tnum); } /* When adding an index to the list of indices for a table, make @@ -103879,10 +109512,15 @@ } pIndex = 0; } + else if( IN_RENAME_OBJECT ){ + assert( pParse->pNewIndex==0 ); + pParse->pNewIndex = pIndex; + pIndex = 0; + } /* Clean up before exiting */ exit_create_index: - if( pIndex ) freeIndex(db, pIndex); + if( pIndex ) sqlite3FreeIndex(db, pIndex); sqlite3ExprDelete(db, pPIWhere); sqlite3ExprListDelete(db, pList); sqlite3SrcListDelete(db, pTblName); @@ -104051,7 +109689,8 @@ ** ** A new IdList is returned, or NULL if malloc() fails. */ -SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3 *db, IdList *pList, Token *pToken){ +SQLITE_PRIVATE IdList *sqlite3IdListAppend(Parse *pParse, IdList *pList, Token *pToken){ + sqlite3 *db = pParse->db; int i; if( pList==0 ){ pList = sqlite3DbMallocZero(db, sizeof(IdList) ); @@ -104069,6 +109708,9 @@ return 0; } pList->a[i].zName = sqlite3NameFromToken(db, pToken); + if( IN_RENAME_OBJECT && pList->a[i].zName ){ + sqlite3RenameTokenMap(pParse, (void*)pList->a[i].zName, pToken); + } return pList; } @@ -104310,10 +109952,17 @@ goto append_from_error; } p = sqlite3SrcListAppend(db, p, pTable, pDatabase); - if( p==0 || NEVER(p->nSrc==0) ){ + if( p==0 ){ goto append_from_error; } + assert( p->nSrc>0 ); pItem = &p->a[p->nSrc-1]; + assert( (pTable==0)==(pDatabase==0) ); + assert( pItem->zName==0 || pDatabase!=0 ); + if( IN_RENAME_OBJECT && pItem->zName ){ + Token *pToken = (ALWAYS(pDatabase) && pDatabase->z) ? pDatabase : pTable; + sqlite3RenameTokenMap(pParse, pItem->zName, pToken); + } assert( pAlias!=0 ); if( pAlias->n ){ pItem->zAlias = sqlite3NameFromToken(db, pAlias); @@ -104337,8 +109986,10 @@ */ SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *pParse, SrcList *p, Token *pIndexedBy){ assert( pIndexedBy!=0 ); - if( p && ALWAYS(p->nSrc>0) ){ - struct SrcList_item *pItem = &p->a[p->nSrc-1]; + if( p && pIndexedBy->n>0 ){ + struct SrcList_item *pItem; + assert( p->nSrc>0 ); + pItem = &p->a[p->nSrc-1]; assert( pItem->fg.notIndexed==0 ); assert( pItem->fg.isIndexedBy==0 ); assert( pItem->fg.isTabFunc==0 ); @@ -104348,7 +109999,7 @@ pItem->fg.notIndexed = 1; }else{ pItem->u1.zIndexedBy = sqlite3NameFromToken(pParse->db, pIndexedBy); - pItem->fg.isIndexedBy = (pItem->u1.zIndexedBy!=0); + pItem->fg.isIndexedBy = 1; } } } @@ -104622,16 +110273,16 @@ sqlite3StrAccumInit(&errMsg, pParse->db, 0, 0, 200); if( pIdx->aColExpr ){ - sqlite3XPrintf(&errMsg, "index '%q'", pIdx->zName); + sqlite3_str_appendf(&errMsg, "index '%q'", pIdx->zName); }else{ for(j=0; jnKeyCol; j++){ char *zCol; assert( pIdx->aiColumn[j]>=0 ); zCol = pTab->aCol[pIdx->aiColumn[j]].zName; - if( j ) sqlite3StrAccumAppend(&errMsg, ", ", 2); - sqlite3StrAccumAppendAll(&errMsg, pTab->zName); - sqlite3StrAccumAppend(&errMsg, ".", 1); - sqlite3StrAccumAppendAll(&errMsg, zCol); + if( j ) sqlite3_str_append(&errMsg, ", ", 2); + sqlite3_str_appendall(&errMsg, pTab->zName); + sqlite3_str_append(&errMsg, ".", 1); + sqlite3_str_appendall(&errMsg, zCol); } } zErr = sqlite3StrAccumFinish(&errMsg); @@ -104819,6 +110470,18 @@ pKey->aSortOrder[i] = pIdx->aSortOrder[i]; } if( pParse->nErr ){ + assert( pParse->rc==SQLITE_ERROR_MISSING_COLLSEQ ); + if( pIdx->bNoQuery==0 ){ + /* Deactivate the index because it contains an unknown collating + ** sequence. The only way to reactive the index is to reload the + ** schema. Adding the missing collating sequence later does not + ** reactive the index. The application had the chance to register + ** the missing index using the collation-needed callback. For + ** simplicity, SQLite will not give the application a second chance. + */ + pIdx->bNoQuery = 1; + pParse->rc = SQLITE_ERROR_RETRY; + } sqlite3KeyInfoUnref(pKey); pKey = 0; } @@ -105004,6 +110667,7 @@ assert( !p || p->xCmp ); if( p==0 ){ sqlite3ErrorMsg(pParse, "no such collation sequence: %s", zName); + pParse->rc = SQLITE_ERROR_MISSING_COLLSEQ; } return p; } @@ -105193,6 +110857,21 @@ } return 0; } +#ifdef SQLITE_ENABLE_NORMALIZE +SQLITE_PRIVATE FuncDef *sqlite3FunctionSearchN( + int h, /* Hash of the name */ + const char *zFunc, /* Name of function */ + int nFunc /* Length of the name */ +){ + FuncDef *p; + for(p=sqlite3BuiltinFunctions.a[h]; p; p=p->u.pHash){ + if( sqlite3StrNICmp(p->zName, zFunc, nFunc)==0 ){ + return p; + } + } + return 0; +} +#endif /* SQLITE_ENABLE_NORMALIZE */ /* ** Insert a new FuncDef into a FuncDefHash hash table. @@ -105206,7 +110885,7 @@ FuncDef *pOther; const char *zName = aDef[i].zName; int nName = sqlite3Strlen30(zName); - int h = (zName[0] + nName) % SQLITE_FUNC_HASH_SZ; + int h = SQLITE_FUNC_HASH(zName[0], nName); assert( zName[0]>='a' && zName[0]<='z' ); pOther = functionSearch(h, zName); if( pOther ){ @@ -105273,7 +110952,7 @@ /* If no match is found, search the built-in functions. ** - ** If the SQLITE_PreferBuiltin flag is set, then search the built-in + ** If the DBFLAG_PreferBuiltin flag is set, then search the built-in ** functions even if a prior app-defined function was found. And give ** priority to built-in functions. ** @@ -105283,9 +110962,9 @@ ** new function. But the FuncDefs for built-in functions are read-only. ** So we must not search for built-ins when creating a new function. */ - if( !createFlag && (pBest==0 || (db->flags & SQLITE_PreferBuiltin)!=0) ){ + if( !createFlag && (pBest==0 || (db->mDbFlags & DBFLAG_PreferBuiltin)!=0) ){ bestScore = 0; - h = (sqlite3UpperToLower[(u8)zName[0]] + nName) % SQLITE_FUNC_HASH_SZ; + h = SQLITE_FUNC_HASH(sqlite3UpperToLower[(u8)zName[0]], nName); p = functionSearch(h, zName); while( p ){ int score = matchQuality(p, nArg, enc); @@ -105304,10 +110983,12 @@ if( createFlag && bestScorezName = (const char*)&pBest[1]; pBest->nArg = (u16)nArg; pBest->funcFlags = enc; memcpy((char*)&pBest[1], zName, nName+1); + for(z=(u8*)pBest->zName; *z; z++) *z = sqlite3UpperToLower[*z]; pOther = (FuncDef*)sqlite3HashInsert(&db->aFunc, pBest->zName, pBest); if( pOther==pBest ){ sqlite3DbFree(db, pBest); @@ -105356,8 +111037,8 @@ pSchema->pSeqTab = 0; if( pSchema->schemaFlags & DB_SchemaLoaded ){ pSchema->iGeneration++; - pSchema->schemaFlags &= ~DB_SchemaLoaded; } + pSchema->schemaFlags &= ~(DB_SchemaLoaded|DB_ResetWanted); } /* @@ -105431,6 +111112,39 @@ return pTab; } +/* Return true if table pTab is read-only. +** +** A table is read-only if any of the following are true: +** +** 1) It is a virtual table and no implementation of the xUpdate method +** has been provided +** +** 2) It is a system table (i.e. sqlite_master), this call is not +** part of a nested parse and writable_schema pragma has not +** been specified +** +** 3) The table is a shadow table, the database connection is in +** defensive mode, and the current sqlite3_prepare() +** is for a top-level SQL statement. +*/ +static int tabIsReadOnly(Parse *pParse, Table *pTab){ + sqlite3 *db; + if( IsVirtual(pTab) ){ + return sqlite3GetVTable(pParse->db, pTab)->pMod->pModule->xUpdate==0; + } + if( (pTab->tabFlags & (TF_Readonly|TF_Shadow))==0 ) return 0; + db = pParse->db; + if( (pTab->tabFlags & TF_Readonly)!=0 ){ + return sqlite3WritableSchema(db)==0 && pParse->nested==0; + } + assert( pTab->tabFlags & TF_Shadow ); + return (db->flags & SQLITE_Defensive)!=0 +#ifndef SQLITE_OMIT_VIRTUALTABLE + && db->pVtabCtx==0 +#endif + && db->nVdbeExec==0; +} + /* ** Check to make sure the given table is writable. If it is not ** writable, generate an error message and return 1. If it is @@ -105437,26 +111151,10 @@ ** writable return 0; */ SQLITE_PRIVATE int sqlite3IsReadOnly(Parse *pParse, Table *pTab, int viewOk){ - /* A table is not writable under the following circumstances: - ** - ** 1) It is a virtual table and no implementation of the xUpdate method - ** has been provided, or - ** 2) It is a system table (i.e. sqlite_master), this call is not - ** part of a nested parse and writable_schema pragma has not - ** been specified. - ** - ** In either case leave an error message in pParse and return non-zero. - */ - if( ( IsVirtual(pTab) - && sqlite3GetVTable(pParse->db, pTab)->pMod->pModule->xUpdate==0 ) - || ( (pTab->tabFlags & TF_Readonly)!=0 - && (pParse->db->flags & SQLITE_WriteSchema)==0 - && pParse->nested==0 ) - ){ + if( tabIsReadOnly(pParse, pTab) ){ sqlite3ErrorMsg(pParse, "table %s may not be modified", pTab->zName); return 1; } - #ifndef SQLITE_OMIT_VIEW if( !viewOk && pTab->pSelect ){ sqlite3ErrorMsg(pParse,"cannot modify %s because it is a view",pTab->zName); @@ -105477,6 +111175,8 @@ Parse *pParse, /* Parsing context */ Table *pView, /* View definition */ Expr *pWhere, /* Optional WHERE clause to be added */ + ExprList *pOrderBy, /* Optional ORDER BY clause */ + Expr *pLimit, /* Optional LIMIT clause */ int iCur /* Cursor number for ephemeral table */ ){ SelectDest dest; @@ -105493,8 +111193,8 @@ assert( pFrom->a[0].pOn==0 ); assert( pFrom->a[0].pUsing==0 ); } - pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, - SF_IncludeHidden, 0, 0); + pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, pOrderBy, + SF_IncludeHidden, pLimit); sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur); sqlite3Select(pParse, pSel, &dest); sqlite3SelectDelete(db, pSel); @@ -105516,21 +111216,23 @@ Expr *pWhere, /* The WHERE clause. May be null */ ExprList *pOrderBy, /* The ORDER BY clause. May be null */ Expr *pLimit, /* The LIMIT clause. May be null */ - Expr *pOffset, /* The OFFSET clause. May be null */ char *zStmtType /* Either DELETE or UPDATE. For err msgs. */ ){ - Expr *pWhereRowid = NULL; /* WHERE rowid .. */ + sqlite3 *db = pParse->db; + Expr *pLhs = NULL; /* LHS of IN(SELECT...) operator */ Expr *pInClause = NULL; /* WHERE rowid IN ( select ) */ - Expr *pSelectRowid = NULL; /* SELECT rowid ... */ ExprList *pEList = NULL; /* Expression list contaning only pSelectRowid */ SrcList *pSelectSrc = NULL; /* SELECT rowid FROM x ... (dup of pSrc) */ Select *pSelect = NULL; /* Complete SELECT tree */ + Table *pTab; /* Check that there isn't an ORDER BY without a LIMIT clause. */ - if( pOrderBy && (pLimit == 0) ) { + if( pOrderBy && pLimit==0 ) { sqlite3ErrorMsg(pParse, "ORDER BY without LIMIT on %s", zStmtType); - goto limit_where_cleanup; + sqlite3ExprDelete(pParse->db, pWhere); + sqlite3ExprListDelete(pParse->db, pOrderBy); + return 0; } /* We only need to generate a select expression if there @@ -105537,8 +111239,6 @@ ** is a limit/offset term to enforce. */ if( pLimit == 0 ) { - /* if pLimit is null, pOffset will always be null as well. */ - assert( pOffset == 0 ); return pWhere; } @@ -105551,36 +111251,47 @@ ** ); */ - pSelectRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0); - if( pSelectRowid == 0 ) goto limit_where_cleanup; - pEList = sqlite3ExprListAppend(pParse, 0, pSelectRowid); - if( pEList == 0 ) goto limit_where_cleanup; + pTab = pSrc->a[0].pTab; + if( HasRowid(pTab) ){ + pLhs = sqlite3PExpr(pParse, TK_ROW, 0, 0); + pEList = sqlite3ExprListAppend( + pParse, 0, sqlite3PExpr(pParse, TK_ROW, 0, 0) + ); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + if( pPk->nKeyCol==1 ){ + const char *zName = pTab->aCol[pPk->aiColumn[0]].zName; + pLhs = sqlite3Expr(db, TK_ID, zName); + pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ID, zName)); + }else{ + int i; + for(i=0; inKeyCol; i++){ + Expr *p = sqlite3Expr(db, TK_ID, pTab->aCol[pPk->aiColumn[i]].zName); + pEList = sqlite3ExprListAppend(pParse, pEList, p); + } + pLhs = sqlite3PExpr(pParse, TK_VECTOR, 0, 0); + if( pLhs ){ + pLhs->x.pList = sqlite3ExprListDup(db, pEList, 0); + } + } + } /* duplicate the FROM clause as it is needed by both the DELETE/UPDATE tree ** and the SELECT subtree. */ + pSrc->a[0].pTab = 0; pSelectSrc = sqlite3SrcListDup(pParse->db, pSrc, 0); - if( pSelectSrc == 0 ) { - sqlite3ExprListDelete(pParse->db, pEList); - goto limit_where_cleanup; - } + pSrc->a[0].pTab = pTab; + pSrc->a[0].pIBIndex = 0; /* generate the SELECT expression tree. */ - pSelect = sqlite3SelectNew(pParse,pEList,pSelectSrc,pWhere,0,0, - pOrderBy,0,pLimit,pOffset); - if( pSelect == 0 ) return 0; + pSelect = sqlite3SelectNew(pParse, pEList, pSelectSrc, pWhere, 0 ,0, + pOrderBy,0,pLimit + ); /* now generate the new WHERE rowid IN clause for the DELETE/UDPATE */ - pWhereRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0); - pInClause = pWhereRowid ? sqlite3PExpr(pParse, TK_IN, pWhereRowid, 0) : 0; + pInClause = sqlite3PExpr(pParse, TK_IN, pLhs, 0); sqlite3PExprAddSelect(pParse, pInClause, pSelect); return pInClause; - -limit_where_cleanup: - sqlite3ExprDelete(pParse->db, pWhere); - sqlite3ExprListDelete(pParse->db, pOrderBy); - sqlite3ExprDelete(pParse->db, pLimit); - sqlite3ExprDelete(pParse->db, pOffset); - return 0; } #endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) */ /* && !defined(SQLITE_OMIT_SUBQUERY) */ @@ -105595,7 +111306,9 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( Parse *pParse, /* The parser context */ SrcList *pTabList, /* The table from which we should delete things */ - Expr *pWhere /* The WHERE clause. May be null */ + Expr *pWhere, /* The WHERE clause. May be null */ + ExprList *pOrderBy, /* ORDER BY clause. May be null */ + Expr *pLimit /* LIMIT clause. May be null */ ){ Vdbe *v; /* The virtual database engine */ Table *pTab; /* The table from which records will be deleted */ @@ -105610,7 +111323,7 @@ AuthContext sContext; /* Authorization context */ NameContext sNC; /* Name context to resolve expressions in */ int iDb; /* Database number */ - int memCnt = -1; /* Memory cell used for change counting */ + int memCnt = 0; /* Memory cell used for change counting */ int rcauth; /* Value returned by authorization callback */ int eOnePass; /* ONEPASS_OFF or _SINGLE or _MULTI */ int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */ @@ -105640,6 +111353,7 @@ } assert( pTabList->nSrc==1 ); + /* Locate the table which we want to delete. This table has to be ** put in an SrcList structure because some of the subroutines we ** will be calling are designed to work with multiple tables and expect @@ -105654,16 +111368,26 @@ #ifndef SQLITE_OMIT_TRIGGER pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); isView = pTab->pSelect!=0; - bComplex = pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0); #else # define pTrigger 0 # define isView 0 #endif + bComplex = pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0); #ifdef SQLITE_OMIT_VIEW # undef isView # define isView 0 #endif +#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT + if( !isView ){ + pWhere = sqlite3LimitWhere( + pParse, pTabList, pWhere, pOrderBy, pLimit, "DELETE" + ); + pOrderBy = 0; + pLimit = 0; + } +#endif + /* If pTab is really a view, make sure it has been initialized. */ if( sqlite3ViewGetColumnNames(pParse, pTab) ){ @@ -105704,7 +111428,7 @@ goto delete_from_cleanup; } if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); - sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3BeginWriteOperation(pParse, bComplex, iDb); /* If we are trying to delete from a view, realize that view into ** an ephemeral table. @@ -105711,8 +111435,12 @@ */ #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) if( isView ){ - sqlite3MaterializeView(pParse, pTab, pWhere, iTabCur); + sqlite3MaterializeView(pParse, pTab, + pWhere, pOrderBy, pLimit, iTabCur + ); iDataCur = iIdxCur = iTabCur; + pOrderBy = 0; + pLimit = 0; } #endif @@ -105728,7 +111456,10 @@ /* Initialize the counter of the number of rows deleted, if ** we are counting rows. */ - if( db->flags & SQLITE_CountRows ){ + if( (db->flags & SQLITE_CountRows)!=0 + && !pParse->nested + && !pParse->pTriggerTab + ){ memCnt = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, memCnt); } @@ -105756,7 +111487,7 @@ assert( !isView ); sqlite3TableLock(pParse, iDb, pTab->tnum, 1, pTab->zName); if( HasRowid(pTab) ){ - sqlite3VdbeAddOp4(v, OP_Clear, pTab->tnum, iDb, memCnt, + sqlite3VdbeAddOp4(v, OP_Clear, pTab->tnum, iDb, memCnt ? memCnt : -1, pTab->zName, P4_STATIC); } for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ @@ -105801,9 +111532,10 @@ eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); assert( IsVirtual(pTab)==0 || eOnePass!=ONEPASS_MULTI ); assert( IsVirtual(pTab) || bComplex || eOnePass!=ONEPASS_OFF ); + if( eOnePass!=ONEPASS_SINGLE ) sqlite3MultiWrite(pParse); /* Keep track of the number of rows to be deleted */ - if( db->flags & SQLITE_CountRows ){ + if( memCnt ){ sqlite3VdbeAddOp2(v, OP_AddImm, memCnt, 1); } @@ -105816,9 +111548,8 @@ } iKey = iPk; }else{ - iKey = pParse->nMem + 1; - iKey = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iTabCur, iKey, 0); - if( iKey>pParse->nMem ) pParse->nMem = iKey; + iKey = ++pParse->nMem; + sqlite3ExprCodeGetColumnOfTable(v, pTab, iTabCur, -1, iKey); } if( eOnePass!=ONEPASS_OFF ){ @@ -105889,7 +111620,11 @@ } }else if( pPk ){ addrLoop = sqlite3VdbeAddOp1(v, OP_Rewind, iEphCur); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_RowData, iEphCur, iKey); + if( IsVirtual(pTab) ){ + sqlite3VdbeAddOp3(v, OP_Column, iEphCur, 0, iKey); + }else{ + sqlite3VdbeAddOp2(v, OP_RowData, iEphCur, iKey); + } assert( nKey==0 ); /* OP_Found will use a composite key */ }else{ addrLoop = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, 0, iKey); @@ -105902,13 +111637,16 @@ if( IsVirtual(pTab) ){ const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); sqlite3VtabMakeWritable(pParse, pTab); - sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iKey, pVTab, P4_VTAB); - sqlite3VdbeChangeP5(v, OE_Abort); assert( eOnePass==ONEPASS_OFF || eOnePass==ONEPASS_SINGLE ); sqlite3MayAbort(pParse); - if( eOnePass==ONEPASS_SINGLE && sqlite3IsToplevel(pParse) ){ - pParse->isMultiWrite = 0; + if( eOnePass==ONEPASS_SINGLE ){ + sqlite3VdbeAddOp1(v, OP_Close, iTabCur); + if( sqlite3IsToplevel(pParse) ){ + pParse->isMultiWrite = 0; + } } + sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iKey, pVTab, P4_VTAB); + sqlite3VdbeChangeP5(v, OE_Abort); }else #endif { @@ -105942,7 +111680,7 @@ ** generating code because of a call to sqlite3NestedParse(), do not ** invoke the callback function. */ - if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ + if( memCnt ){ sqlite3VdbeAddOp2(v, OP_ResultRow, memCnt, 1); sqlite3VdbeSetNumCols(v, 1); sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows deleted", SQLITE_STATIC); @@ -105952,6 +111690,10 @@ sqlite3AuthContextPop(&sContext); sqlite3SrcListDelete(db, pTabList); sqlite3ExprDelete(db, pWhere); +#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) + sqlite3ExprListDelete(db, pOrderBy); + sqlite3ExprDelete(db, pLimit); +#endif sqlite3DbFree(db, aToOpen); return; } @@ -106109,7 +111851,7 @@ u8 p5 = 0; sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur,0,iIdxNoSeek); sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, (count?OPFLAG_NCHANGE:0)); - if( pParse->nested==0 ){ + if( pParse->nested==0 || 0==sqlite3_stricmp(pTab->zName, "sqlite_stat1") ){ sqlite3VdbeAppendP4(v, (char*)pTab, P4_TABLE); } if( eMode!=ONEPASS_OFF ){ @@ -106240,7 +111982,6 @@ if( pIdx->pPartIdxWhere ){ *piPartIdxLabel = sqlite3VdbeMakeLabel(v); pParse->iSelfTab = iDataCur + 1; - sqlite3ExprCachePush(pParse); sqlite3ExprIfFalseDup(pParse, pIdx->pPartIdxWhere, *piPartIdxLabel, SQLITE_JUMPIFNULL); pParse->iSelfTab = 0; @@ -106287,7 +112028,6 @@ SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse *pParse, int iLabel){ if( iLabel ){ sqlite3VdbeResolveLabel(pParse->pVdbe, iLabel); - sqlite3ExprCachePop(pParse); } } @@ -106330,6 +112070,8 @@ ** iteration of the aggregate loop. */ static void sqlite3SkipAccumulatorLoad(sqlite3_context *context){ + assert( context->isError<=0 ); + context->isError = -1; context->skipFlag = 1; } @@ -106396,8 +112138,6 @@ int argc, sqlite3_value **argv ){ - int len; - assert( argc==1 ); UNUSED_PARAMETER(argc); switch( sqlite3_value_type(argv[0]) ){ @@ -106409,13 +112149,17 @@ } case SQLITE_TEXT: { const unsigned char *z = sqlite3_value_text(argv[0]); + const unsigned char *z0; + unsigned char c; if( z==0 ) return; - len = 0; - while( *z ){ - len++; - SQLITE_SKIP_UTF8(z); + z0 = z; + while( (c = *z)!=0 ){ + z++; + if( c>=0xc0 ){ + while( (*z & 0xc0)==0x80 ){ z++; z0++; } + } } - sqlite3_result_int(context, len); + sqlite3_result_int(context, (int)(z-z0)); break; } default: { @@ -106542,7 +112286,7 @@ x.apArg = argv+1; sqlite3StrAccumInit(&str, db, 0, 0, db->aLimit[SQLITE_LIMIT_LENGTH]); str.printfFlags = SQLITE_PRINTF_SQLFUNC; - sqlite3XPrintf(&str, zFormat, &x); + sqlite3_str_appendf(&str, zFormat, &x); n = str.nChar; sqlite3_result_text(context, sqlite3StrAccumFinish(&str), n, SQLITE_DYNAMIC); @@ -106993,16 +112737,20 @@ ** c or cx. */ if( c<=0x80 ){ - u32 cx; + char zStop[3]; int bMatch; if( noCase ){ - cx = sqlite3Toupper(c); - c = sqlite3Tolower(c); + zStop[0] = sqlite3Toupper(c); + zStop[1] = sqlite3Tolower(c); + zStop[2] = 0; }else{ - cx = c; + zStop[0] = c; + zStop[1] = 0; } - while( (c2 = *(zString++))!=0 ){ - if( c2!=c && c2!=cx ) continue; + while(1){ + zString += strcspn((const char*)zString, zStop); + if( zString[0]==0 ) break; + zString++; bMatch = patternCompare(zPattern,zString,pInfo,matchOther); if( bMatch!=SQLITE_NOMATCH ) return bMatch; } @@ -107160,7 +112908,8 @@ #ifdef SQLITE_TEST sqlite3_like_count++; #endif - sqlite3_result_int(context, patternCompare(zB, zA, pInfo, escape)==SQLITE_MATCH); + sqlite3_result_int(context, + patternCompare(zB, zA, pInfo, escape)==SQLITE_MATCH); } } @@ -107485,6 +113234,8 @@ i64 nOut; /* Maximum size of zOut */ int loopLimit; /* Last zStr[] that might match zPattern[] */ int i, j; /* Loop counters */ + unsigned cntExpand; /* Number zOut expansions */ + sqlite3 *db = sqlite3_context_db_handle(context); assert( argc==3 ); UNUSED_PARAMETER(argc); @@ -107516,33 +113267,40 @@ return; } loopLimit = nStr - nPattern; + cntExpand = 0; for(i=j=0; i<=loopLimit; i++){ if( zStr[i]!=zPattern[0] || memcmp(&zStr[i], zPattern, nPattern) ){ zOut[j++] = zStr[i]; }else{ - u8 *zOld; - sqlite3 *db = sqlite3_context_db_handle(context); - nOut += nRep - nPattern; - testcase( nOut-1==db->aLimit[SQLITE_LIMIT_LENGTH] ); - testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] ); - if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){ - sqlite3_result_error_toobig(context); - sqlite3_free(zOut); - return; + if( nRep>nPattern ){ + nOut += nRep - nPattern; + testcase( nOut-1==db->aLimit[SQLITE_LIMIT_LENGTH] ); + testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] ); + if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){ + sqlite3_result_error_toobig(context); + sqlite3_free(zOut); + return; + } + cntExpand++; + if( (cntExpand&(cntExpand-1))==0 ){ + /* Grow the size of the output buffer only on substitutions + ** whose index is a power of two: 1, 2, 4, 8, 16, 32, ... */ + u8 *zOld; + zOld = zOut; + zOut = sqlite3_realloc64(zOut, (int)nOut + (nOut - nStr - 1)); + if( zOut==0 ){ + sqlite3_result_error_nomem(context); + sqlite3_free(zOld); + return; + } + } } - zOld = zOut; - zOut = sqlite3_realloc64(zOut, (int)nOut); - if( zOut==0 ){ - sqlite3_result_error_nomem(context); - sqlite3_free(zOld); - return; - } memcpy(&zOut[j], zRep, nRep); j += nRep; i += nPattern-1; } } - assert( j+nStr-i+1==nOut ); + assert( j+nStr-i+1<=nOut ); memcpy(&zOut[j], &zStr[i], nStr-i); j += nStr - i; assert( j<=nOut ); @@ -107782,7 +113540,7 @@ i64 v = sqlite3_value_int64(argv[0]); p->rSum += v; if( (p->approx|p->overflow)==0 && sqlite3AddInt64(&p->iSum, v) ){ - p->overflow = 1; + p->approx = p->overflow = 1; } }else{ p->rSum += sqlite3_value_double(argv[0]); @@ -107790,6 +113548,32 @@ } } } +#ifndef SQLITE_OMIT_WINDOWFUNC +static void sumInverse(sqlite3_context *context, int argc, sqlite3_value**argv){ + SumCtx *p; + int type; + assert( argc==1 ); + UNUSED_PARAMETER(argc); + p = sqlite3_aggregate_context(context, sizeof(*p)); + type = sqlite3_value_numeric_type(argv[0]); + /* p is always non-NULL because sumStep() will have been called first + ** to initialize it */ + if( ALWAYS(p) && type!=SQLITE_NULL ){ + assert( p->cnt>0 ); + p->cnt--; + assert( type==SQLITE_INTEGER || p->approx ); + if( type==SQLITE_INTEGER && p->approx==0 ){ + i64 v = sqlite3_value_int64(argv[0]); + p->rSum -= v; + p->iSum -= v; + }else{ + p->rSum -= sqlite3_value_double(argv[0]); + } + } +} +#else +# define sumInverse 0 +#endif /* SQLITE_OMIT_WINDOWFUNC */ static void sumFinalize(sqlite3_context *context){ SumCtx *p; p = sqlite3_aggregate_context(context, 0); @@ -107824,6 +113608,9 @@ typedef struct CountCtx CountCtx; struct CountCtx { i64 n; +#ifdef SQLITE_DEBUG + int bInverse; /* True if xInverse() ever called */ +#endif }; /* @@ -107841,7 +113628,7 @@ ** sure it still operates correctly, verify that its count agrees with our ** internal count when using count(*) and when the total count can be ** expressed as a 32-bit integer. */ - assert( argc==1 || p==0 || p->n>0x7fffffff + assert( argc==1 || p==0 || p->n>0x7fffffff || p->bInverse || p->n==sqlite3_aggregate_count(context) ); #endif } @@ -107850,6 +113637,21 @@ p = sqlite3_aggregate_context(context, 0); sqlite3_result_int64(context, p ? p->n : 0); } +#ifndef SQLITE_OMIT_WINDOWFUNC +static void countInverse(sqlite3_context *ctx, int argc, sqlite3_value **argv){ + CountCtx *p; + p = sqlite3_aggregate_context(ctx, sizeof(*p)); + /* p is always non-NULL since countStep() will have been called first */ + if( (argc==0 || SQLITE_NULL!=sqlite3_value_type(argv[0])) && ALWAYS(p) ){ + p->n--; +#ifdef SQLITE_DEBUG + p->bInverse = 1; +#endif + } +} +#else +# define countInverse 0 +#endif /* SQLITE_OMIT_WINDOWFUNC */ /* ** Routines to implement min() and max() aggregate functions. @@ -107866,7 +113668,7 @@ pBest = (Mem *)sqlite3_aggregate_context(context, sizeof(*pBest)); if( !pBest ) return; - if( sqlite3_value_type(argv[0])==SQLITE_NULL ){ + if( sqlite3_value_type(pArg)==SQLITE_NULL ){ if( pBest->flags ) sqlite3SkipAccumulatorLoad(context); }else if( pBest->flags ){ int max; @@ -107892,7 +113694,7 @@ sqlite3VdbeMemCopy(pBest, pArg); } } -static void minMaxFinalize(sqlite3_context *context){ +static void minMaxValueFinalize(sqlite3_context *context, int bValue){ sqlite3_value *pRes; pRes = (sqlite3_value *)sqlite3_aggregate_context(context, 0); if( pRes ){ @@ -107899,9 +113701,19 @@ if( pRes->flags ){ sqlite3_result_value(context, pRes); } - sqlite3VdbeMemRelease(pRes); + if( bValue==0 ) sqlite3VdbeMemRelease(pRes); } } +#ifndef SQLITE_OMIT_WINDOWFUNC +static void minMaxValue(sqlite3_context *context){ + minMaxValueFinalize(context, 1); +} +#else +# define minMaxValue 0 +#endif /* SQLITE_OMIT_WINDOWFUNC */ +static void minMaxFinalize(sqlite3_context *context){ + minMaxValueFinalize(context, 0); +} /* ** group_concat(EXPR, ?SEPARATOR?) @@ -107931,20 +113743,52 @@ zSep = ","; nSep = 1; } - if( zSep ) sqlite3StrAccumAppend(pAccum, zSep, nSep); + if( zSep ) sqlite3_str_append(pAccum, zSep, nSep); } zVal = (char*)sqlite3_value_text(argv[0]); nVal = sqlite3_value_bytes(argv[0]); - if( zVal ) sqlite3StrAccumAppend(pAccum, zVal, nVal); + if( zVal ) sqlite3_str_append(pAccum, zVal, nVal); } } +#ifndef SQLITE_OMIT_WINDOWFUNC +static void groupConcatInverse( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + int n; + StrAccum *pAccum; + assert( argc==1 || argc==2 ); + if( sqlite3_value_type(argv[0])==SQLITE_NULL ) return; + pAccum = (StrAccum*)sqlite3_aggregate_context(context, sizeof(*pAccum)); + /* pAccum is always non-NULL since groupConcatStep() will have always + ** run frist to initialize it */ + if( ALWAYS(pAccum) ){ + n = sqlite3_value_bytes(argv[0]); + if( argc==2 ){ + n += sqlite3_value_bytes(argv[1]); + }else{ + n++; + } + if( n>=(int)pAccum->nChar ){ + pAccum->nChar = 0; + }else{ + pAccum->nChar -= n; + memmove(pAccum->zText, &pAccum->zText[n], pAccum->nChar); + } + if( pAccum->nChar==0 ) pAccum->mxAlloc = 0; + } +} +#else +# define groupConcatInverse 0 +#endif /* SQLITE_OMIT_WINDOWFUNC */ static void groupConcatFinalize(sqlite3_context *context){ StrAccum *pAccum; pAccum = sqlite3_aggregate_context(context, 0); if( pAccum ){ - if( pAccum->accError==STRACCUM_TOOBIG ){ + if( pAccum->accError==SQLITE_TOOBIG ){ sqlite3_result_error_toobig(context); - }else if( pAccum->accError==STRACCUM_NOMEM ){ + }else if( pAccum->accError==SQLITE_NOMEM ){ sqlite3_result_error_nomem(context); }else{ sqlite3_result_text(context, sqlite3StrAccumFinish(pAccum), -1, @@ -107952,6 +113796,24 @@ } } } +#ifndef SQLITE_OMIT_WINDOWFUNC +static void groupConcatValue(sqlite3_context *context){ + sqlite3_str *pAccum; + pAccum = (sqlite3_str*)sqlite3_aggregate_context(context, 0); + if( pAccum ){ + if( pAccum->accError==SQLITE_TOOBIG ){ + sqlite3_result_error_toobig(context); + }else if( pAccum->accError==SQLITE_NOMEM ){ + sqlite3_result_error_nomem(context); + }else{ + const char *zText = sqlite3_str_value(pAccum); + sqlite3_result_text(context, zText, -1, SQLITE_TRANSIENT); + } + } +} +#else +# define groupConcatValue 0 +#endif /* SQLITE_OMIT_WINDOWFUNC */ /* ** This routine does per-connection function registration. Most @@ -107989,10 +113851,10 @@ }else{ pInfo = (struct compareInfo*)&likeInfoNorm; } - sqlite3CreateFunc(db, "like", 2, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0); - sqlite3CreateFunc(db, "like", 3, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0); + sqlite3CreateFunc(db, "like", 2, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0, 0, 0); + sqlite3CreateFunc(db, "like", 3, SQLITE_UTF8, pInfo, likeFunc, 0, 0, 0, 0, 0); sqlite3CreateFunc(db, "glob", 2, SQLITE_UTF8, - (struct compareInfo*)&globInfo, likeFunc, 0, 0, 0); + (struct compareInfo*)&globInfo, likeFunc, 0, 0, 0, 0, 0); setLikeOptFlag(db, "glob", SQLITE_FUNC_LIKE | SQLITE_FUNC_CASE); setLikeOptFlag(db, "like", caseSensitive ? (SQLITE_FUNC_LIKE | SQLITE_FUNC_CASE) : SQLITE_FUNC_LIKE); @@ -108001,10 +113863,15 @@ /* ** pExpr points to an expression which implements a function. If ** it is appropriate to apply the LIKE optimization to that function -** then set aWc[0] through aWc[2] to the wildcard characters and -** return TRUE. If the function is not a LIKE-style function then -** return FALSE. +** then set aWc[0] through aWc[2] to the wildcard characters and the +** escape character and then return TRUE. If the function is not a +** LIKE-style function then return FALSE. ** +** The expression "a LIKE b ESCAPE c" is only considered a valid LIKE +** operator if c is a string literal that is exactly one byte in length. +** That one byte is stored in aWc[3]. aWc[3] is set to zero if there is +** no ESCAPE clause. +** ** *pIsNocase is set to true if uppercase and lowercase are equivalent for ** the function (default for LIKE). If the function makes the distinction ** between uppercase and lowercase (as does GLOB) then *pIsNocase is set to @@ -108012,17 +113879,26 @@ */ SQLITE_PRIVATE int sqlite3IsLikeFunction(sqlite3 *db, Expr *pExpr, int *pIsNocase, char *aWc){ FuncDef *pDef; - if( pExpr->op!=TK_FUNCTION - || !pExpr->x.pList - || pExpr->x.pList->nExpr!=2 - ){ + int nExpr; + if( pExpr->op!=TK_FUNCTION || !pExpr->x.pList ){ return 0; } assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - pDef = sqlite3FindFunction(db, pExpr->u.zToken, 2, SQLITE_UTF8, 0); + nExpr = pExpr->x.pList->nExpr; + pDef = sqlite3FindFunction(db, pExpr->u.zToken, nExpr, SQLITE_UTF8, 0); if( NEVER(pDef==0) || (pDef->funcFlags & SQLITE_FUNC_LIKE)==0 ){ return 0; } + if( nExpr<3 ){ + aWc[3] = 0; + }else{ + Expr *pEscape = pExpr->x.pList->a[2].pExpr; + char *zEscape; + if( pEscape->op!=TK_STRING ) return 0; + zEscape = pEscape->u.zToken; + if( zEscape[0]==0 || zEscape[1]!=0 ) return 0; + aWc[3] = zEscape[0]; + } /* The memcpy() statement assumes that the wildcard characters are ** the first three statements in the compareInfo structure. The @@ -108075,6 +113951,10 @@ #ifdef SQLITE_DEBUG FUNCTION2(affinity, 1, 0, 0, noopFunc, SQLITE_FUNC_AFFINITY), #endif +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC + FUNCTION2(sqlite_offset, 1, 0, 0, noopFunc, SQLITE_FUNC_OFFSET| + SQLITE_FUNC_TYPEOF), +#endif FUNCTION(ltrim, 1, 1, 0, trimFunc ), FUNCTION(ltrim, 2, 1, 0, trimFunc ), FUNCTION(rtrim, 1, 2, 0, trimFunc ), @@ -108083,11 +113963,11 @@ FUNCTION(trim, 2, 3, 0, trimFunc ), FUNCTION(min, -1, 0, 1, minmaxFunc ), FUNCTION(min, 0, 0, 1, 0 ), - AGGREGATE2(min, 1, 0, 1, minmaxStep, minMaxFinalize, + WAGGREGATE(min, 1, 0, 1, minmaxStep, minMaxFinalize, minMaxValue, 0, SQLITE_FUNC_MINMAX ), FUNCTION(max, -1, 1, 1, minmaxFunc ), FUNCTION(max, 0, 1, 1, 0 ), - AGGREGATE2(max, 1, 1, 1, minmaxStep, minMaxFinalize, + WAGGREGATE(max, 1, 1, 1, minmaxStep, minMaxFinalize, minMaxValue, 0, SQLITE_FUNC_MINMAX ), FUNCTION2(typeof, 1, 0, 0, typeofFunc, SQLITE_FUNC_TYPEOF), FUNCTION2(length, 1, 0, 0, lengthFunc, SQLITE_FUNC_LENGTH), @@ -108118,14 +113998,17 @@ FUNCTION(zeroblob, 1, 0, 0, zeroblobFunc ), FUNCTION(substr, 2, 0, 0, substrFunc ), FUNCTION(substr, 3, 0, 0, substrFunc ), - AGGREGATE(sum, 1, 0, 0, sumStep, sumFinalize ), - AGGREGATE(total, 1, 0, 0, sumStep, totalFinalize ), - AGGREGATE(avg, 1, 0, 0, sumStep, avgFinalize ), - AGGREGATE2(count, 0, 0, 0, countStep, countFinalize, - SQLITE_FUNC_COUNT ), - AGGREGATE(count, 1, 0, 0, countStep, countFinalize ), - AGGREGATE(group_concat, 1, 0, 0, groupConcatStep, groupConcatFinalize), - AGGREGATE(group_concat, 2, 0, 0, groupConcatStep, groupConcatFinalize), + WAGGREGATE(sum, 1,0,0, sumStep, sumFinalize, sumFinalize, sumInverse, 0), + WAGGREGATE(total, 1,0,0, sumStep,totalFinalize,totalFinalize,sumInverse, 0), + WAGGREGATE(avg, 1,0,0, sumStep, avgFinalize, avgFinalize, sumInverse, 0), + WAGGREGATE(count, 0,0,0, countStep, + countFinalize, countFinalize, countInverse, SQLITE_FUNC_COUNT ), + WAGGREGATE(count, 1,0,0, countStep, + countFinalize, countFinalize, countInverse, 0 ), + WAGGREGATE(group_concat, 1, 0, 0, groupConcatStep, + groupConcatFinalize, groupConcatValue, groupConcatInverse, 0), + WAGGREGATE(group_concat, 2, 0, 0, groupConcatStep, + groupConcatFinalize, groupConcatValue, groupConcatInverse, 0), LIKEFUNC(glob, 2, &globInfo, SQLITE_FUNC_LIKE|SQLITE_FUNC_CASE), #ifdef SQLITE_CASE_SENSITIVE_LIKE @@ -108145,6 +114028,7 @@ #ifndef SQLITE_OMIT_ALTERTABLE sqlite3AlterFunctions(); #endif + sqlite3WindowFunctions(); #if defined(SQLITE_ENABLE_STAT3) || defined(SQLITE_ENABLE_STAT4) sqlite3AnalyzeFunctions(); #endif @@ -108503,6 +114387,12 @@ int iCur = pParse->nTab - 1; /* Cursor number to use */ int iOk = sqlite3VdbeMakeLabel(v); /* jump here if parent key found */ + sqlite3VdbeVerifyAbortable(v, + (!pFKey->isDeferred + && !(pParse->db->flags & SQLITE_DeferFKs) + && !pParse->pToplevel + && !pParse->isMultiWrite) ? OE_Abort : OE_Ignore); + /* If nIncr is less than zero, then check at runtime if there are any ** outstanding constraints to resolve. If there are not, there is no need ** to check if deleting this row resolves any outstanding violations. @@ -108668,7 +114558,7 @@ ){ Expr *pExpr = sqlite3Expr(db, TK_COLUMN, 0); if( pExpr ){ - pExpr->pTab = pTab; + pExpr->y.pTab = pTab; pExpr->iTable = iCursor; pExpr->iColumn = iCol; } @@ -108876,11 +114766,12 @@ */ SQLITE_PRIVATE void sqlite3FkDropTable(Parse *pParse, SrcList *pName, Table *pTab){ sqlite3 *db = pParse->db; - if( (db->flags&SQLITE_ForeignKeys) && !IsVirtual(pTab) && !pTab->pSelect ){ + if( (db->flags&SQLITE_ForeignKeys) && !IsVirtual(pTab) ){ int iSkip = 0; Vdbe *v = sqlite3GetVdbe(pParse); assert( v ); /* VDBE has already been allocated */ + assert( pTab->pSelect==0 ); /* Not a view */ if( sqlite3FkReferences(pTab)==0 ){ /* Search for a deferred foreign key constraint for which this table ** is the child table. If one cannot be found, return without @@ -108897,7 +114788,7 @@ } pParse->disableTriggers = 1; - sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0); + sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0, 0, 0); pParse->disableTriggers = 0; /* If the DELETE has generated immediate foreign key constraint @@ -108910,6 +114801,7 @@ ** constraints are violated. */ if( (db->flags & SQLITE_DeferFKs)==0 ){ + sqlite3VdbeVerifyAbortable(v, OE_Abort); sqlite3VdbeAddOp2(v, OP_FkIfZero, 0, sqlite3VdbeCurrentAddr(v)+2); VdbeCoverage(v); sqlite3HaltConstraint(pParse, SQLITE_CONSTRAINT_FOREIGNKEY, @@ -109455,7 +115347,7 @@ sqlite3ExprListAppend(pParse, 0, pRaise), sqlite3SrcListAppend(db, 0, &tFrom, 0), pWhere, - 0, 0, 0, 0, 0, 0 + 0, 0, 0, 0, 0 ); pWhere = 0; } @@ -109742,7 +115634,8 @@ }while( i>=0 && zColAff[i]==SQLITE_AFF_BLOB ); pTab->zColAff = zColAff; } - i = sqlite3Strlen30(zColAff); + assert( zColAff!=0 ); + i = sqlite3Strlen30NN(zColAff); if( i ){ if( iReg ){ sqlite3VdbeAddOp4(v, OP_Affinity, iReg, i, 0, zColAff, i); @@ -109806,11 +115699,12 @@ ** first use of table pTab. On 2nd and subsequent uses, the original ** AutoincInfo structure is used. ** -** Three memory locations are allocated: +** Four consecutive registers are allocated: ** -** (1) Register to hold the name of the pTab table. -** (2) Register to hold the maximum ROWID of pTab. -** (3) Register to hold the rowid in sqlite_sequence of pTab +** (1) The name of the pTab table. +** (2) The maximum ROWID of pTab. +** (3) The rowid in sqlite_sequence of pTab +** (4) The original value of the max ROWID in pTab, or NULL if none ** ** The 2nd register is the one that is returned. That is all the ** insert routine needs to know about. @@ -109821,12 +115715,27 @@ Table *pTab /* The table we are writing to */ ){ int memId = 0; /* Register holding maximum rowid */ + assert( pParse->db->aDb[iDb].pSchema!=0 ); if( (pTab->tabFlags & TF_Autoincrement)!=0 - && (pParse->db->flags & SQLITE_Vacuum)==0 + && (pParse->db->mDbFlags & DBFLAG_Vacuum)==0 ){ Parse *pToplevel = sqlite3ParseToplevel(pParse); AutoincInfo *pInfo; + Table *pSeqTab = pParse->db->aDb[iDb].pSchema->pSeqTab; + /* Verify that the sqlite_sequence table exists and is an ordinary + ** rowid table with exactly two columns. + ** Ticket d8dc2b3a58cd5dc2918a1d4acb 2018-05-23 */ + if( pSeqTab==0 + || !HasRowid(pSeqTab) + || IsVirtual(pSeqTab) + || pSeqTab->nCol!=2 + ){ + pParse->nErr++; + pParse->rc = SQLITE_CORRUPT_SEQUENCE; + return 0; + } + pInfo = pToplevel->pAinc; while( pInfo && pInfo->pTab!=pTab ){ pInfo = pInfo->pNext; } if( pInfo==0 ){ @@ -109838,7 +115747,7 @@ pInfo->iDb = iDb; pToplevel->nMem++; /* Register to hold name of table */ pInfo->regCtr = ++pToplevel->nMem; /* Max rowid register */ - pToplevel->nMem++; /* Rowid in sqlite_sequence */ + pToplevel->nMem +=2; /* Rowid in sqlite_sequence + orig max val */ } memId = pInfo->regCtr; } @@ -109866,15 +115775,17 @@ static const int iLn = VDBE_OFFSET_LINENO(2); static const VdbeOpList autoInc[] = { /* 0 */ {OP_Null, 0, 0, 0}, - /* 1 */ {OP_Rewind, 0, 9, 0}, + /* 1 */ {OP_Rewind, 0, 10, 0}, /* 2 */ {OP_Column, 0, 0, 0}, - /* 3 */ {OP_Ne, 0, 7, 0}, + /* 3 */ {OP_Ne, 0, 9, 0}, /* 4 */ {OP_Rowid, 0, 0, 0}, /* 5 */ {OP_Column, 0, 1, 0}, - /* 6 */ {OP_Goto, 0, 9, 0}, - /* 7 */ {OP_Next, 0, 2, 0}, - /* 8 */ {OP_Integer, 0, 0, 0}, - /* 9 */ {OP_Close, 0, 0, 0} + /* 6 */ {OP_AddImm, 0, 0, 0}, + /* 7 */ {OP_Copy, 0, 0, 0}, + /* 8 */ {OP_Goto, 0, 11, 0}, + /* 9 */ {OP_Next, 0, 2, 0}, + /* 10 */ {OP_Integer, 0, 0, 0}, + /* 11 */ {OP_Close, 0, 0, 0} }; VdbeOp *aOp; pDb = &db->aDb[p->iDb]; @@ -109885,7 +115796,7 @@ aOp = sqlite3VdbeAddOpList(v, ArraySize(autoInc), autoInc, iLn); if( aOp==0 ) break; aOp[0].p2 = memId; - aOp[0].p3 = memId+1; + aOp[0].p3 = memId+2; aOp[2].p3 = memId; aOp[3].p1 = memId-1; aOp[3].p3 = memId; @@ -109892,7 +115803,10 @@ aOp[3].p5 = SQLITE_JUMPIFNULL; aOp[4].p2 = memId+1; aOp[5].p3 = memId; - aOp[8].p2 = memId; + aOp[6].p1 = memId; + aOp[7].p2 = memId+2; + aOp[7].p1 = memId; + aOp[10].p2 = memId; } } @@ -109939,6 +115853,8 @@ iRec = sqlite3GetTempReg(pParse); assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) ); + sqlite3VdbeAddOp3(v, OP_Le, memId+2, sqlite3VdbeCurrentAddr(v)+7, memId); + VdbeCoverage(v); sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenWrite); aOp = sqlite3VdbeAddOpList(v, ArraySize(autoIncEnd), autoIncEnd, iLn); if( aOp==0 ) break; @@ -110076,11 +115992,11 @@ SrcList *pTabList, /* Name of table into which we are inserting */ Select *pSelect, /* A SELECT statement to use as the data source */ IdList *pColumn, /* Column names corresponding to IDLIST. */ - int onError /* How to handle constraint errors */ + int onError, /* How to handle constraint errors */ + Upsert *pUpsert /* ON CONFLICT clauses for upsert, or NULL */ ){ sqlite3 *db; /* The main database structure */ Table *pTab; /* The table to insert into. aka TABLE */ - char *zTab; /* Name of the table into which we are inserting */ int i, j; /* Loop counters */ Vdbe *v; /* Generate code into this virtual machine */ Index *pIdx; /* For looping over indices of the table */ @@ -110136,8 +116052,6 @@ /* Locate the table into which we will be inserting new information. */ assert( pTabList->nSrc==1 ); - zTab = pTabList->a[0].zName; - if( NEVER(zTab==0) ) goto insert_cleanup; pTab = sqlite3SrcListLookup(pParse, pTabList); if( pTab==0 ){ goto insert_cleanup; @@ -110374,7 +116288,10 @@ /* Initialize the count of rows to be inserted */ - if( db->flags & SQLITE_CountRows ){ + if( (db->flags & SQLITE_CountRows)!=0 + && !pParse->nested + && !pParse->pTriggerTab + ){ regRowCount = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); } @@ -110394,7 +116311,20 @@ pParse->nMem += pIdx->nColumn; } } +#ifndef SQLITE_OMIT_UPSERT + if( pUpsert ){ + pTabList->a[0].iCursor = iDataCur; + pUpsert->pUpsertSrc = pTabList; + pUpsert->regData = regData; + pUpsert->iDataCur = iDataCur; + pUpsert->iIdxCur = iIdxCur; + if( pUpsert->pUpsertTarget ){ + sqlite3UpsertAnalyzeTarget(pParse, pTabList, pUpsert); + } + } +#endif + /* This is the top of the main insertion loop */ if( useTempTable ){ /* This block codes the top of loop only. The complete loop is the @@ -110508,7 +116438,8 @@ VdbeOp *pOp; sqlite3ExprCode(pParse, pList->a[ipkColumn].pExpr, regRowid); pOp = sqlite3VdbeGetOp(v, -1); - if( ALWAYS(pOp) && pOp->opcode==OP_Null && !IsVirtual(pTab) ){ + assert( pOp!=0 ); + if( pOp->opcode==OP_Null && !IsVirtual(pTab) ){ appendFlag = 1; pOp->opcode = OP_NewRowid; pOp->p1 = iDataCur; @@ -110595,7 +116526,7 @@ int isReplace; /* Set to true if constraints may cause a replace */ int bUseSeek; /* True to use OPFLAG_SEEKRESULT */ sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, - regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace, 0 + regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace, 0, pUpsert ); sqlite3FkCheck(pParse, pTab, 0, regIns, 0, 0); @@ -110618,7 +116549,7 @@ /* Update the count of rows that are inserted */ - if( (db->flags & SQLITE_CountRows)!=0 ){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); } @@ -110655,7 +116586,7 @@ ** generating code because of a call to sqlite3NestedParse(), do not ** invoke the callback function. */ - if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); sqlite3VdbeSetNumCols(v, 1); sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows inserted", SQLITE_STATIC); @@ -110664,6 +116595,7 @@ insert_cleanup: sqlite3SrcListDelete(db, pTabList); sqlite3ExprListDelete(db, pList); + sqlite3UpsertDelete(db, pUpsert); sqlite3SelectDelete(db, pSelect); sqlite3IdListDelete(db, pColumn); sqlite3DbFree(db, aRegIdx); @@ -110683,14 +116615,15 @@ #endif /* -** Meanings of bits in of pWalker->eCode for checkConstraintUnchanged() +** Meanings of bits in of pWalker->eCode for +** sqlite3ExprReferencesUpdatedColumn() */ #define CKCNSTRNT_COLUMN 0x01 /* CHECK constraint uses a changing column */ #define CKCNSTRNT_ROWID 0x02 /* CHECK constraint references the ROWID */ -/* This is the Walker callback from checkConstraintUnchanged(). Set -** bit 0x01 of pWalker->eCode if -** pWalker->eCode to 0 if this expression node references any of the +/* This is the Walker callback from sqlite3ExprReferencesUpdatedColumn(). +* Set bit 0x01 of pWalker->eCode if pWalker->eCode to 0 and if this +** expression node references any of the ** columns that are being modifed by an UPDATE statement. */ static int checkConstraintExprNode(Walker *pWalker, Expr *pExpr){ @@ -110712,12 +116645,21 @@ ** only columns that are modified by the UPDATE are those for which ** aiChng[i]>=0, and also the ROWID is modified if chngRowid is true. ** -** Return true if CHECK constraint pExpr does not use any of the +** Return true if CHECK constraint pExpr uses any of the ** changing columns (or the rowid if it is changing). In other words, -** return true if this CHECK constraint can be skipped when validating +** return true if this CHECK constraint must be validated for ** the new row in the UPDATE statement. +** +** 2018-09-15: pExpr might also be an expression for an index-on-expressions. +** The operation of this routine is the same - return true if an only if +** the expression uses one or more of columns identified by the second and +** third arguments. */ -static int checkConstraintUnchanged(Expr *pExpr, int *aiChng, int chngRowid){ +SQLITE_PRIVATE int sqlite3ExprReferencesUpdatedColumn( + Expr *pExpr, /* The expression to be checked */ + int *aiChng, /* aiChng[x]>=0 if column x changed by the UPDATE */ + int chngRowid /* True if UPDATE changes the rowid */ +){ Walker w; memset(&w, 0, sizeof(w)); w.eCode = 0; @@ -110732,7 +116674,7 @@ testcase( w.eCode==CKCNSTRNT_COLUMN ); testcase( w.eCode==CKCNSTRNT_ROWID ); testcase( w.eCode==(CKCNSTRNT_ROWID|CKCNSTRNT_COLUMN) ); - return !w.eCode; + return w.eCode!=0; } /* @@ -110830,7 +116772,8 @@ u8 overrideError, /* Override onError to this if not OE_Default */ int ignoreDest, /* Jump to this label on an OE_Ignore resolution */ int *pbMayReplace, /* OUT: Set to true if constraint may cause a replace */ - int *aiChng /* column i is unchanged if aiChng[i]<0 */ + int *aiChng, /* column i is unchanged if aiChng[i]<0 */ + Upsert *pUpsert /* ON CONFLICT clauses, if any. NULL otherwise */ ){ Vdbe *v; /* VDBE under constrution */ Index *pIdx; /* Pointer to one of the indices */ @@ -110843,10 +116786,13 @@ int addr1; /* Address of jump instruction */ int seenReplace = 0; /* True if REPLACE is used to resolve INT PK conflict */ int nPkField; /* Number of fields in PRIMARY KEY. 1 for ROWID tables */ - int ipkTop = 0; /* Top of the rowid change constraint check */ - int ipkBottom = 0; /* Bottom of the rowid change constraint check */ + Index *pUpIdx = 0; /* Index to which to apply the upsert */ u8 isUpdate; /* True if this is an UPDATE operation */ u8 bAffinityDone = 0; /* True if the OP_Affinity operation has been run */ + int upsertBypass = 0; /* Address of Goto to bypass upsert subroutine */ + int upsertJump = 0; /* Address of Goto that jumps into upsert subroutine */ + int ipkTop = 0; /* Top of the IPK uniqueness check */ + int ipkBottom = 0; /* OP_Goto at the end of the IPK uniqueness check */ isUpdate = regOldData!=0; db = pParse->db; @@ -110934,8 +116880,15 @@ for(i=0; inExpr; i++){ int allOk; Expr *pExpr = pCheck->a[i].pExpr; - if( aiChng && checkConstraintUnchanged(pExpr, aiChng, pkChng) ) continue; + if( aiChng + && !sqlite3ExprReferencesUpdatedColumn(pExpr, aiChng, pkChng) + ){ + /* The check constraints do not reference any of the columns being + ** updated so there is no point it verifying the check constraint */ + continue; + } allOk = sqlite3VdbeMakeLabel(v); + sqlite3VdbeVerifyAbortable(v, onError); sqlite3ExprIfTrue(pParse, pExpr, allOk, SQLITE_JUMPIFNULL); if( onError==OE_Ignore ){ sqlite3VdbeGoto(v, ignoreDest); @@ -110953,6 +116906,50 @@ } #endif /* !defined(SQLITE_OMIT_CHECK) */ + /* UNIQUE and PRIMARY KEY constraints should be handled in the following + ** order: + ** + ** (1) OE_Update + ** (2) OE_Abort, OE_Fail, OE_Rollback, OE_Ignore + ** (3) OE_Replace + ** + ** OE_Fail and OE_Ignore must happen before any changes are made. + ** OE_Update guarantees that only a single row will change, so it + ** must happen before OE_Replace. Technically, OE_Abort and OE_Rollback + ** could happen in any order, but they are grouped up front for + ** convenience. + ** + ** 2018-08-14: Ticket https://www.sqlite.org/src/info/908f001483982c43 + ** The order of constraints used to have OE_Update as (2) and OE_Abort + ** and so forth as (1). But apparently PostgreSQL checks the OE_Update + ** constraint before any others, so it had to be moved. + ** + ** Constraint checking code is generated in this order: + ** (A) The rowid constraint + ** (B) Unique index constraints that do not have OE_Replace as their + ** default conflict resolution strategy + ** (C) Unique index that do use OE_Replace by default. + ** + ** The ordering of (2) and (3) is accomplished by making sure the linked + ** list of indexes attached to a table puts all OE_Replace indexes last + ** in the list. See sqlite3CreateIndex() for where that happens. + */ + + if( pUpsert ){ + if( pUpsert->pUpsertTarget==0 ){ + /* An ON CONFLICT DO NOTHING clause, without a constraint-target. + ** Make all unique constraint resolution be OE_Ignore */ + assert( pUpsert->pUpsertSet==0 ); + overrideError = OE_Ignore; + pUpsert = 0; + }else if( (pUpIdx = pUpsert->pUpsertIdx)!=0 ){ + /* If the constraint-target uniqueness check must be run first. + ** Jump to that uniqueness check now */ + upsertJump = sqlite3VdbeAddOp0(v, OP_Goto); + VdbeComment((v, "UPSERT constraint goes first")); + } + } + /* If rowid is changing, make sure the new rowid does not previously ** exist in the table. */ @@ -110967,6 +116964,28 @@ onError = OE_Abort; } + /* figure out whether or not upsert applies in this case */ + if( pUpsert && pUpsert->pUpsertIdx==0 ){ + if( pUpsert->pUpsertSet==0 ){ + onError = OE_Ignore; /* DO NOTHING is the same as INSERT OR IGNORE */ + }else{ + onError = OE_Update; /* DO UPDATE */ + } + } + + /* If the response to a rowid conflict is REPLACE but the response + ** to some other UNIQUE constraint is FAIL or IGNORE, then we need + ** to defer the running of the rowid conflict checking until after + ** the UNIQUE constraints have run. + */ + if( onError==OE_Replace /* IPK rule is REPLACE */ + && onError!=overrideError /* Rules for other contraints are different */ + && pTab->pIndex /* There exist other constraints */ + ){ + ipkTop = sqlite3VdbeAddOp0(v, OP_Goto)+1; + VdbeComment((v, "defer IPK REPLACE until last")); + } + if( isUpdate ){ /* pkChng!=0 does not mean that the rowid has changed, only that ** it might have changed. Skip the conflict logic below if the rowid @@ -110976,26 +116995,13 @@ VdbeCoverage(v); } - /* If the response to a rowid conflict is REPLACE but the response - ** to some other UNIQUE constraint is FAIL or IGNORE, then we need - ** to defer the running of the rowid conflict checking until after - ** the UNIQUE constraints have run. - */ - if( onError==OE_Replace && overrideError!=OE_Replace ){ - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->onError==OE_Ignore || pIdx->onError==OE_Fail ){ - ipkTop = sqlite3VdbeAddOp0(v, OP_Goto); - break; - } - } - } - /* Check to see if the new rowid already exists in the table. Skip ** the following conflict logic if it does not. */ + VdbeNoopComment((v, "uniqueness check for ROWID")); + sqlite3VdbeVerifyAbortable(v, onError); sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, addrRowidOk, regNewData); VdbeCoverage(v); - /* Generate code that deals with a rowid collision */ switch( onError ){ default: { onError = OE_Abort; @@ -111004,6 +117010,9 @@ case OE_Rollback: case OE_Abort: case OE_Fail: { + testcase( onError==OE_Rollback ); + testcase( onError==OE_Abort ); + testcase( onError==OE_Fail ); sqlite3RowidConstraint(pParse, onError, pTab); break; } @@ -111040,14 +117049,13 @@ regNewData, 1, 0, OE_Replace, 1, -1); }else{ #ifdef SQLITE_ENABLE_PREUPDATE_HOOK - if( HasRowid(pTab) ){ - /* This OP_Delete opcode fires the pre-update-hook only. It does - ** not modify the b-tree. It is more efficient to let the coming - ** OP_Insert replace the existing entry than it is to delete the - ** existing entry and then insert a new one. */ - sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, OPFLAG_ISNOOP); - sqlite3VdbeAppendP4(v, pTab, P4_TABLE); - } + assert( HasRowid(pTab) ); + /* This OP_Delete opcode fires the pre-update-hook only. It does + ** not modify the b-tree. It is more efficient to let the coming + ** OP_Insert replace the existing entry than it is to delete the + ** existing entry and then insert a new one. */ + sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, OPFLAG_ISNOOP); + sqlite3VdbeAppendP4(v, pTab, P4_TABLE); #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ if( pTab->pIndex ){ sqlite3MultiWrite(pParse); @@ -111057,8 +117065,14 @@ seenReplace = 1; break; } +#ifndef SQLITE_OMIT_UPSERT + case OE_Update: { + sqlite3UpsertDoUpdate(pParse, pUpsert, pTab, 0, iDataCur); + /* Fall through */ + } +#endif case OE_Ignore: { - /*assert( seenReplace==0 );*/ + testcase( onError==OE_Ignore ); sqlite3VdbeGoto(v, ignoreDest); break; } @@ -111066,7 +117080,7 @@ sqlite3VdbeResolveLabel(v, addrRowidOk); if( ipkTop ){ ipkBottom = sqlite3VdbeAddOp0(v, OP_Goto); - sqlite3VdbeJumpHere(v, ipkTop); + sqlite3VdbeJumpHere(v, ipkTop-1); } } @@ -111084,13 +117098,22 @@ int addrUniqueOk; /* Jump here if the UNIQUE constraint is satisfied */ if( aRegIdx[ix]==0 ) continue; /* Skip indices that do not change */ - if( bAffinityDone==0 ){ + if( pUpIdx==pIdx ){ + addrUniqueOk = upsertJump+1; + upsertBypass = sqlite3VdbeGoto(v, 0); + VdbeComment((v, "Skip upsert subroutine")); + sqlite3VdbeJumpHere(v, upsertJump); + }else{ + addrUniqueOk = sqlite3VdbeMakeLabel(v); + } + if( bAffinityDone==0 && (pUpIdx==0 || pUpIdx==pIdx) ){ sqlite3TableAffinity(v, pTab, regNewData+1); bAffinityDone = 1; } + VdbeNoopComment((v, "uniqueness check for %s", pIdx->zName)); iThisCur = iIdxCur+ix; - addrUniqueOk = sqlite3VdbeMakeLabel(v); + /* Skip partial indices for which the WHERE clause is not true */ if( pIdx->pPartIdxWhere ){ sqlite3VdbeAddOp2(v, OP_Null, 0, aRegIdx[ix]); @@ -111149,6 +117172,15 @@ onError = OE_Abort; } + /* Figure out if the upsert clause applies to this index */ + if( pUpIdx==pIdx ){ + if( pUpsert->pUpsertSet==0 ){ + onError = OE_Ignore; /* DO NOTHING is the same as INSERT OR IGNORE */ + }else{ + onError = OE_Update; /* DO UPDATE */ + } + } + /* Collision detection may be omitted if all of the following are true: ** (1) The conflict resolution algorithm is REPLACE ** (2) The table is a WITHOUT ROWID table @@ -111169,6 +117201,7 @@ } /* Check to see if the new index entry will be unique */ + sqlite3VdbeVerifyAbortable(v, onError); sqlite3VdbeAddOp4Int(v, OP_NoConflict, iThisCur, addrUniqueOk, regIdx, pIdx->nKeyCol); VdbeCoverage(v); @@ -111230,15 +117263,25 @@ /* Generate code that executes if the new index entry is not unique */ assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail - || onError==OE_Ignore || onError==OE_Replace ); + || onError==OE_Ignore || onError==OE_Replace || onError==OE_Update ); switch( onError ){ case OE_Rollback: case OE_Abort: case OE_Fail: { + testcase( onError==OE_Rollback ); + testcase( onError==OE_Abort ); + testcase( onError==OE_Fail ); sqlite3UniqueConstraint(pParse, onError, pIdx); break; } +#ifndef SQLITE_OMIT_UPSERT + case OE_Update: { + sqlite3UpsertDoUpdate(pParse, pUpsert, pTab, pIdx, iIdxCur+ix); + /* Fall through */ + } +#endif case OE_Ignore: { + testcase( onError==OE_Ignore ); sqlite3VdbeGoto(v, ignoreDest); break; } @@ -111245,10 +117288,12 @@ default: { Trigger *pTrigger = 0; assert( onError==OE_Replace ); - sqlite3MultiWrite(pParse); if( db->flags&SQLITE_RecTriggers ){ pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); } + if( pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0) ){ + sqlite3MultiWrite(pParse); + } sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur, regR, nPkField, 0, OE_Replace, (pIdx==pPk ? ONEPASS_SINGLE : ONEPASS_OFF), iThisCur); @@ -111256,14 +117301,22 @@ break; } } - sqlite3VdbeResolveLabel(v, addrUniqueOk); + if( pUpIdx==pIdx ){ + sqlite3VdbeGoto(v, upsertJump+1); + sqlite3VdbeJumpHere(v, upsertBypass); + }else{ + sqlite3VdbeResolveLabel(v, addrUniqueOk); + } if( regR!=regIdx ) sqlite3ReleaseTempRange(pParse, regR, nPkField); } + + /* If the IPK constraint is a REPLACE, run it last */ if( ipkTop ){ sqlite3VdbeGoto(v, ipkTop+1); + VdbeComment((v, "Do IPK REPLACE")); sqlite3VdbeJumpHere(v, ipkBottom); } - + *pbMayReplace = seenReplace; VdbeModuleComment((v, "END: GenCnstCks(%d)", seenReplace)); } @@ -111359,7 +117412,6 @@ sqlite3SetMakeRecordP5(v, pTab); if( !bAffinityDone ){ sqlite3TableAffinity(v, pTab, 0); - sqlite3ExprCacheAffinityChange(pParse, regData, pTab->nCol); } if( pParse->nested ){ pik_flags = 0; @@ -111605,7 +117657,6 @@ if( pSelect->pLimit ){ return 0; /* SELECT may not have a LIMIT clause */ } - assert( pSelect->pOffset==0 ); /* Must be so if pLimit==0 */ if( pSelect->pPrior ){ return 0; /* SELECT may not be a compound query */ } @@ -111655,7 +117706,7 @@ Column *pDestCol = &pDest->aCol[i]; Column *pSrcCol = &pSrc->aCol[i]; #ifdef SQLITE_ENABLE_HIDDEN_COLUMNS - if( (db->flags & SQLITE_Vacuum)==0 + if( (db->mDbFlags & DBFLAG_Vacuum)==0 && (pDestCol->colFlags | pSrcCol->colFlags) & COLFLAG_HIDDEN ){ return 0; /* Neither table may have __hidden__ columns */ @@ -111731,7 +117782,7 @@ regRowid = sqlite3GetTempReg(pParse); sqlite3OpenTable(pParse, iDest, iDbDest, pDest, OP_OpenWrite); assert( HasRowid(pDest) || destHasUniqueIdx ); - if( (db->flags & SQLITE_Vacuum)==0 && ( + if( (db->mDbFlags & DBFLAG_Vacuum)==0 && ( (pDest->iPKey<0 && pDest->pIndex!=0) /* (1) */ || destHasUniqueIdx /* (2) */ || (onError!=OE_Abort && onError!=OE_Rollback) /* (3) */ @@ -111738,8 +117789,8 @@ )){ /* In some circumstances, we are able to run the xfer optimization ** only if the destination table is initially empty. Unless the - ** SQLITE_Vacuum flag is set, this block generates code to make - ** that determination. If SQLITE_Vacuum is set, then the destination + ** DBFLAG_Vacuum flag is set, this block generates code to make + ** that determination. If DBFLAG_Vacuum is set, then the destination ** table is always empty. ** ** Conditions under which the destination must be empty: @@ -111763,6 +117814,7 @@ emptySrcTest = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); if( pDest->iPKey>=0 ){ addr1 = sqlite3VdbeAddOp2(v, OP_Rowid, iSrc, regRowid); + sqlite3VdbeVerifyAbortable(v, onError); addr2 = sqlite3VdbeAddOp3(v, OP_NotExists, iDest, 0, regRowid); VdbeCoverage(v); sqlite3RowidConstraint(pParse, onError, pDest); @@ -111775,8 +117827,8 @@ assert( (pDest->tabFlags & TF_Autoincrement)==0 ); } sqlite3VdbeAddOp3(v, OP_RowData, iSrc, regData, 1); - if( db->flags & SQLITE_Vacuum ){ - sqlite3VdbeAddOp3(v, OP_Last, iDest, 0, -1); + if( db->mDbFlags & DBFLAG_Vacuum ){ + sqlite3VdbeAddOp1(v, OP_SeekEnd, iDest); insFlags = OPFLAG_NCHANGE|OPFLAG_LASTROWID| OPFLAG_APPEND|OPFLAG_USESEEKRESULT; }else{ @@ -111807,13 +117859,13 @@ VdbeComment((v, "%s", pDestIdx->zName)); addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); sqlite3VdbeAddOp3(v, OP_RowData, iSrc, regData, 1); - if( db->flags & SQLITE_Vacuum ){ + if( db->mDbFlags & DBFLAG_Vacuum ){ /* This INSERT command is part of a VACUUM operation, which guarantees ** that the destination table is empty. If all indexed columns use ** collation sequence BINARY, then it can also be assumed that the ** index will be populated by inserting keys in strictly sorted ** order. In this case, instead of seeking within the b-tree as part - ** of every OP_IdxInsert opcode, an OP_Last is added before the + ** of every OP_IdxInsert opcode, an OP_SeekEnd is added before the ** OP_IdxInsert to seek to the point within the b-tree where each key ** should be inserted. This is faster. ** @@ -111828,7 +117880,7 @@ } if( i==pSrcIdx->nColumn ){ idxInsFlags = OPFLAG_USESEEKRESULT; - sqlite3VdbeAddOp3(v, OP_Last, iDest, 0, -1); + sqlite3VdbeAddOp1(v, OP_SeekEnd, iDest); } } if( !HasRowid(pSrc) && pDestIdx->idxType==2 ){ @@ -112159,7 +118211,7 @@ int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*, const char*,const char*),void*); void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*)); - char * (*snprintf)(int,char*,const char*,...); + char * (*xsnprintf)(int,char*,const char*,...); int (*step)(sqlite3_stmt*); int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*, char const**,char const**,int*,int*,int*); @@ -112271,7 +118323,7 @@ int (*uri_boolean)(const char*,const char*,int); sqlite3_int64 (*uri_int64)(const char*,const char*,sqlite3_int64); const char *(*uri_parameter)(const char*,const char*); - char *(*vsnprintf)(int,char*,const char*,va_list); + char *(*xvsnprintf)(int,char*,const char*,va_list); int (*wal_checkpoint_v2)(sqlite3*,const char*,int,int*,int*); /* Version 3.8.7 and later */ int (*auto_extension)(void(*)(void)); @@ -112317,6 +118369,33 @@ int (*bind_pointer)(sqlite3_stmt*,int,void*,const char*,void(*)(void*)); void (*result_pointer)(sqlite3_context*,void*,const char*,void(*)(void*)); void *(*value_pointer)(sqlite3_value*,const char*); + int (*vtab_nochange)(sqlite3_context*); + int (*value_nochange)(sqlite3_value*); + const char *(*vtab_collation)(sqlite3_index_info*,int); + /* Version 3.24.0 and later */ + int (*keyword_count)(void); + int (*keyword_name)(int,const char**,int*); + int (*keyword_check)(const char*,int); + sqlite3_str *(*str_new)(sqlite3*); + char *(*str_finish)(sqlite3_str*); + void (*str_appendf)(sqlite3_str*, const char *zFormat, ...); + void (*str_vappendf)(sqlite3_str*, const char *zFormat, va_list); + void (*str_append)(sqlite3_str*, const char *zIn, int N); + void (*str_appendall)(sqlite3_str*, const char *zIn); + void (*str_appendchar)(sqlite3_str*, int N, char C); + void (*str_reset)(sqlite3_str*); + int (*str_errcode)(sqlite3_str*); + int (*str_length)(sqlite3_str*); + char *(*str_value)(sqlite3_str*); + /* Version 3.25.0 and later */ + int (*create_window_function)(sqlite3*,const char*,int,int,void*, + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInv)(sqlite3_context*,int,sqlite3_value**), + void(*xDestroy)(void*)); + /* Version 3.26.0 and later */ + const char *(*normalized_sql)(sqlite3_stmt*); }; /* @@ -112443,7 +118522,7 @@ #define sqlite3_rollback_hook sqlite3_api->rollback_hook #define sqlite3_set_authorizer sqlite3_api->set_authorizer #define sqlite3_set_auxdata sqlite3_api->set_auxdata -#define sqlite3_snprintf sqlite3_api->snprintf +#define sqlite3_snprintf sqlite3_api->xsnprintf #define sqlite3_step sqlite3_api->step #define sqlite3_table_column_metadata sqlite3_api->table_column_metadata #define sqlite3_thread_cleanup sqlite3_api->thread_cleanup @@ -112467,7 +118546,7 @@ #define sqlite3_value_text16le sqlite3_api->value_text16le #define sqlite3_value_type sqlite3_api->value_type #define sqlite3_vmprintf sqlite3_api->vmprintf -#define sqlite3_vsnprintf sqlite3_api->vsnprintf +#define sqlite3_vsnprintf sqlite3_api->xvsnprintf #define sqlite3_overload_function sqlite3_api->overload_function #define sqlite3_prepare_v2 sqlite3_api->prepare_v2 #define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2 @@ -112543,7 +118622,7 @@ #define sqlite3_uri_boolean sqlite3_api->uri_boolean #define sqlite3_uri_int64 sqlite3_api->uri_int64 #define sqlite3_uri_parameter sqlite3_api->uri_parameter -#define sqlite3_uri_vsnprintf sqlite3_api->vsnprintf +#define sqlite3_uri_vsnprintf sqlite3_api->xvsnprintf #define sqlite3_wal_checkpoint_v2 sqlite3_api->wal_checkpoint_v2 /* Version 3.8.7 and later */ #define sqlite3_auto_extension sqlite3_api->auto_extension @@ -112583,6 +118662,29 @@ #define sqlite3_bind_pointer sqlite3_api->bind_pointer #define sqlite3_result_pointer sqlite3_api->result_pointer #define sqlite3_value_pointer sqlite3_api->value_pointer +/* Version 3.22.0 and later */ +#define sqlite3_vtab_nochange sqlite3_api->vtab_nochange +#define sqlite3_value_nochange sqlite3_api->value_nochange +#define sqlite3_vtab_collation sqlite3_api->vtab_collation +/* Version 3.24.0 and later */ +#define sqlite3_keyword_count sqlite3_api->keyword_count +#define sqlite3_keyword_name sqlite3_api->keyword_name +#define sqlite3_keyword_check sqlite3_api->keyword_check +#define sqlite3_str_new sqlite3_api->str_new +#define sqlite3_str_finish sqlite3_api->str_finish +#define sqlite3_str_appendf sqlite3_api->str_appendf +#define sqlite3_str_vappendf sqlite3_api->str_vappendf +#define sqlite3_str_append sqlite3_api->str_append +#define sqlite3_str_appendall sqlite3_api->str_appendall +#define sqlite3_str_appendchar sqlite3_api->str_appendchar +#define sqlite3_str_reset sqlite3_api->str_reset +#define sqlite3_str_errcode sqlite3_api->str_errcode +#define sqlite3_str_length sqlite3_api->str_length +#define sqlite3_str_value sqlite3_api->str_value +/* Version 3.25.0 and later */ +#define sqlite3_create_window_function sqlite3_api->create_window_function +/* Version 3.26.0 and later */ +#define sqlite3_normalized_sql sqlite3_api->normalized_sql #endif /* !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) */ #if !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) @@ -112671,6 +118773,7 @@ # define sqlite3_declare_vtab 0 # define sqlite3_vtab_config 0 # define sqlite3_vtab_on_conflict 0 +# define sqlite3_vtab_collation 0 #endif #ifdef SQLITE_OMIT_SHARED_CACHE @@ -113017,7 +119120,34 @@ sqlite3_prepare16_v3, sqlite3_bind_pointer, sqlite3_result_pointer, - sqlite3_value_pointer + sqlite3_value_pointer, + /* Version 3.22.0 and later */ + sqlite3_vtab_nochange, + sqlite3_value_nochange, + sqlite3_vtab_collation, + /* Version 3.24.0 and later */ + sqlite3_keyword_count, + sqlite3_keyword_name, + sqlite3_keyword_check, + sqlite3_str_new, + sqlite3_str_finish, + sqlite3_str_appendf, + sqlite3_str_vappendf, + sqlite3_str_append, + sqlite3_str_appendall, + sqlite3_str_appendchar, + sqlite3_str_reset, + sqlite3_str_errcode, + sqlite3_str_length, + sqlite3_str_value, + /* Version 3.25.0 and later */ + sqlite3_create_window_function, + /* Version 3.26.0 and later */ +#ifdef SQLITE_ENABLE_NORMALIZE + sqlite3_normalized_sql +#else + 0 +#endif }; /* @@ -113467,10 +119597,9 @@ #define PragTyp_ACTIVATE_EXTENSIONS 40 #define PragTyp_HEXKEY 41 #define PragTyp_KEY 42 -#define PragTyp_REKEY 43 -#define PragTyp_LOCK_STATUS 44 -#define PragTyp_PARSER_TRACE 45 -#define PragTyp_STATS 46 +#define PragTyp_LOCK_STATUS 43 +#define PragTyp_PARSER_TRACE 44 +#define PragTyp_STATS 45 /* Property flags associated with various pragma. */ #define PragFlg_NeedSchema 0x01 /* Force schema load before running */ @@ -113487,21 +119616,22 @@ ** result column is different from the name of the pragma */ static const char *const pragCName[] = { - /* 0 */ "cache_size", /* Used by: default_cache_size */ - /* 1 */ "cid", /* Used by: table_info */ - /* 2 */ "name", - /* 3 */ "type", - /* 4 */ "notnull", - /* 5 */ "dflt_value", - /* 6 */ "pk", - /* 7 */ "tbl", /* Used by: stats */ - /* 8 */ "idx", - /* 9 */ "wdth", - /* 10 */ "hght", - /* 11 */ "flgs", - /* 12 */ "seqno", /* Used by: index_info */ - /* 13 */ "cid", - /* 14 */ "name", + /* 0 */ "id", /* Used by: foreign_key_list */ + /* 1 */ "seq", + /* 2 */ "table", + /* 3 */ "from", + /* 4 */ "to", + /* 5 */ "on_update", + /* 6 */ "on_delete", + /* 7 */ "match", + /* 8 */ "cid", /* Used by: table_xinfo */ + /* 9 */ "name", + /* 10 */ "type", + /* 11 */ "notnull", + /* 12 */ "dflt_value", + /* 13 */ "pk", + /* 14 */ "hidden", + /* table_info reuses 8 */ /* 15 */ "seqno", /* Used by: index_xinfo */ /* 16 */ "cid", /* 17 */ "name", @@ -113508,37 +119638,35 @@ /* 18 */ "desc", /* 19 */ "coll", /* 20 */ "key", - /* 21 */ "seq", /* Used by: index_list */ - /* 22 */ "name", - /* 23 */ "unique", - /* 24 */ "origin", - /* 25 */ "partial", - /* 26 */ "seq", /* Used by: database_list */ + /* 21 */ "tbl", /* Used by: stats */ + /* 22 */ "idx", + /* 23 */ "wdth", + /* 24 */ "hght", + /* 25 */ "flgs", + /* 26 */ "seq", /* Used by: index_list */ /* 27 */ "name", - /* 28 */ "file", - /* 29 */ "name", /* Used by: function_list */ - /* 30 */ "builtin", - /* 31 */ "name", /* Used by: module_list pragma_list */ - /* 32 */ "seq", /* Used by: collation_list */ - /* 33 */ "name", - /* 34 */ "id", /* Used by: foreign_key_list */ - /* 35 */ "seq", - /* 36 */ "table", - /* 37 */ "from", - /* 38 */ "to", - /* 39 */ "on_update", - /* 40 */ "on_delete", - /* 41 */ "match", - /* 42 */ "table", /* Used by: foreign_key_check */ - /* 43 */ "rowid", - /* 44 */ "parent", - /* 45 */ "fkid", - /* 46 */ "busy", /* Used by: wal_checkpoint */ - /* 47 */ "log", - /* 48 */ "checkpointed", - /* 49 */ "timeout", /* Used by: busy_timeout */ - /* 50 */ "database", /* Used by: lock_status */ - /* 51 */ "status", + /* 28 */ "unique", + /* 29 */ "origin", + /* 30 */ "partial", + /* 31 */ "table", /* Used by: foreign_key_check */ + /* 32 */ "rowid", + /* 33 */ "parent", + /* 34 */ "fkid", + /* index_info reuses 15 */ + /* 35 */ "seq", /* Used by: database_list */ + /* 36 */ "name", + /* 37 */ "file", + /* 38 */ "busy", /* Used by: wal_checkpoint */ + /* 39 */ "log", + /* 40 */ "checkpointed", + /* 41 */ "name", /* Used by: function_list */ + /* 42 */ "builtin", + /* collation_list reuses 26 */ + /* 43 */ "database", /* Used by: lock_status */ + /* 44 */ "status", + /* 45 */ "cache_size", /* Used by: default_cache_size */ + /* module_list pragma_list reuses 9 */ + /* 46 */ "timeout", /* Used by: busy_timeout */ }; /* Definitions of all built-in pragmas */ @@ -113548,7 +119676,7 @@ u8 mPragFlg; /* Zero or more PragFlg_XXX values */ u8 iPragCName; /* Start of column names in pragCName[] */ u8 nPragCName; /* Num of col names. 0 means use pragma name */ - u32 iArg; /* Extra argument */ + u64 iArg; /* Extra argument */ } PragmaName; static const PragmaName aPragmaName[] = { #if defined(SQLITE_HAS_CODEC) || defined(SQLITE_ENABLE_CEROD) @@ -113584,7 +119712,7 @@ {/* zName: */ "busy_timeout", /* ePragTyp: */ PragTyp_BUSY_TIMEOUT, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 49, 1, + /* ColNames: */ 46, 1, /* iArg: */ 0 }, #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) {/* zName: */ "cache_size", @@ -113621,7 +119749,7 @@ {/* zName: */ "collation_list", /* ePragTyp: */ PragTyp_COLLATION_LIST, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 32, 2, + /* ColNames: */ 26, 2, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_COMPILEOPTION_DIAGS) @@ -113656,7 +119784,7 @@ {/* zName: */ "database_list", /* ePragTyp: */ PragTyp_DATABASE_LIST, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0, - /* ColNames: */ 26, 3, + /* ColNames: */ 35, 3, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED) @@ -113663,7 +119791,7 @@ {/* zName: */ "default_cache_size", /* ePragTyp: */ PragTyp_DEFAULT_CACHE_SIZE, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq|PragFlg_NoColumns1, - /* ColNames: */ 0, 1, + /* ColNames: */ 45, 1, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) @@ -113693,7 +119821,7 @@ {/* zName: */ "foreign_key_check", /* ePragTyp: */ PragTyp_FOREIGN_KEY_CHECK, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0, - /* ColNames: */ 42, 4, + /* ColNames: */ 31, 4, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FOREIGN_KEY) @@ -113700,7 +119828,7 @@ {/* zName: */ "foreign_key_list", /* ePragTyp: */ PragTyp_FOREIGN_KEY_LIST, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 34, 8, + /* ColNames: */ 0, 8, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) @@ -113736,7 +119864,7 @@ {/* zName: */ "function_list", /* ePragTyp: */ PragTyp_FUNCTION_LIST, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 29, 2, + /* ColNames: */ 41, 2, /* iArg: */ 0 }, #endif #endif @@ -113745,12 +119873,12 @@ /* ePragTyp: */ PragTyp_HEXKEY, /* ePragFlg: */ 0, /* ColNames: */ 0, 0, - /* iArg: */ 0 }, + /* iArg: */ 2 }, {/* zName: */ "hexrekey", /* ePragTyp: */ PragTyp_HEXKEY, /* ePragFlg: */ 0, /* ColNames: */ 0, 0, - /* iArg: */ 0 }, + /* iArg: */ 3 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) #if !defined(SQLITE_OMIT_CHECK) @@ -113772,12 +119900,12 @@ {/* zName: */ "index_info", /* ePragTyp: */ PragTyp_INDEX_INFO, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 12, 3, + /* ColNames: */ 15, 3, /* iArg: */ 0 }, {/* zName: */ "index_list", /* ePragTyp: */ PragTyp_INDEX_LIST, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 21, 5, + /* ColNames: */ 26, 5, /* iArg: */ 0 }, {/* zName: */ "index_xinfo", /* ePragTyp: */ PragTyp_INDEX_INFO, @@ -113812,6 +119940,11 @@ /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) + {/* zName: */ "legacy_alter_table", + /* ePragTyp: */ PragTyp_FLAG, + /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1, + /* ColNames: */ 0, 0, + /* iArg: */ SQLITE_LegacyAlter }, {/* zName: */ "legacy_file_format", /* ePragTyp: */ PragTyp_FLAG, /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1, @@ -113829,7 +119962,7 @@ {/* zName: */ "lock_status", /* ePragTyp: */ PragTyp_LOCK_STATUS, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 50, 2, + /* ColNames: */ 43, 2, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) @@ -113855,7 +119988,7 @@ {/* zName: */ "module_list", /* ePragTyp: */ PragTyp_MODULE_LIST, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 31, 1, + /* ColNames: */ 9, 1, /* iArg: */ 0 }, #endif #endif @@ -113888,7 +120021,7 @@ {/* zName: */ "pragma_list", /* ePragTyp: */ PragTyp_PRAGMA_LIST, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 31, 1, + /* ColNames: */ 9, 1, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) @@ -113919,10 +120052,10 @@ #endif #if defined(SQLITE_HAS_CODEC) {/* zName: */ "rekey", - /* ePragTyp: */ PragTyp_REKEY, + /* ePragTyp: */ PragTyp_KEY, /* ePragFlg: */ 0, /* ColNames: */ 0, 0, - /* iArg: */ 0 }, + /* iArg: */ 1 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) {/* zName: */ "reverse_unordered_selects", @@ -113975,7 +120108,7 @@ {/* zName: */ "stats", /* ePragTyp: */ PragTyp_STATS, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, - /* ColNames: */ 7, 5, + /* ColNames: */ 21, 5, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) @@ -113989,8 +120122,13 @@ {/* zName: */ "table_info", /* ePragTyp: */ PragTyp_TABLE_INFO, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 1, 6, + /* ColNames: */ 8, 6, /* iArg: */ 0 }, + {/* zName: */ "table_xinfo", + /* ePragTyp: */ PragTyp_TABLE_INFO, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, + /* ColNames: */ 8, 7, + /* iArg: */ 1 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) {/* zName: */ "temp_store", @@ -114004,6 +120142,18 @@ /* ColNames: */ 0, 0, /* iArg: */ 0 }, #endif +#if defined(SQLITE_HAS_CODEC) + {/* zName: */ "textkey", + /* ePragTyp: */ PragTyp_KEY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 4 }, + {/* zName: */ "textrekey", + /* ePragTyp: */ PragTyp_KEY, + /* ePragFlg: */ 0, + /* ColNames: */ 0, 0, + /* iArg: */ 5 }, +#endif {/* zName: */ "threads", /* ePragTyp: */ PragTyp_THREADS, /* ePragFlg: */ PragFlg_Result0, @@ -114054,7 +120204,7 @@ {/* zName: */ "wal_checkpoint", /* ePragTyp: */ PragTyp_WAL_CHECKPOINT, /* ePragFlg: */ PragFlg_NeedSchema, - /* ColNames: */ 46, 3, + /* ColNames: */ 38, 3, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) @@ -114062,10 +120212,10 @@ /* ePragTyp: */ PragTyp_FLAG, /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1, /* ColNames: */ 0, 0, - /* iArg: */ SQLITE_WriteSchema }, + /* iArg: */ SQLITE_WriteSchema|SQLITE_NoSchemaError }, #endif }; -/* Number of pragmas: 60 on by default, 77 total. */ +/* Number of pragmas: 62 on by default, 81 total. */ /************** End of pragma.h **********************************************/ /************** Continuing where we left off in pragma.c *********************/ @@ -114338,16 +120488,16 @@ /* ** Helper subroutine for PRAGMA integrity_check: ** -** Generate code to output a single-column result row with the result -** held in register regResult. Decrement the result count and halt if -** the maximum number of result rows have been issued. +** Generate code to output a single-column result row with a value of the +** string held in register 3. Decrement the result count in register 1 +** and halt if the maximum number of result rows have been issued. */ -static int integrityCheckResultRow(Vdbe *v, int regResult){ +static int integrityCheckResultRow(Vdbe *v){ int addr; - sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, 1); + sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); addr = sqlite3VdbeAddOp3(v, OP_IfPos, 1, sqlite3VdbeCurrentAddr(v)+2, 1); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); + sqlite3VdbeAddOp0(v, OP_Halt); return addr; } @@ -115077,7 +121227,7 @@ setPragmaResultColumnNames(v, pPragma); returnSingleInt(v, (db->flags & pPragma->iArg)!=0 ); }else{ - int mask = pPragma->iArg; /* Mask of bits to set or clear. */ + u64 mask = pPragma->iArg; /* Mask of bits to set or clear. */ if( db->autoCommit==0 ){ /* Foreign key support may not be enabled or disabled while not ** in auto-commit mode. */ @@ -115120,20 +121270,23 @@ ** type: Column declaration type. ** notnull: True if 'NOT NULL' is part of column declaration ** dflt_value: The default value for the column, if any. + ** pk: Non-zero for PK fields. */ case PragTyp_TABLE_INFO: if( zRight ){ Table *pTab; pTab = sqlite3LocateTable(pParse, LOCATE_NOERR, zRight, zDb); if( pTab ){ + int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema); int i, k; int nHidden = 0; Column *pCol; Index *pPk = sqlite3PrimaryKeyIndex(pTab); - pParse->nMem = 6; - sqlite3CodeVerifySchema(pParse, iDb); + pParse->nMem = 7; + sqlite3CodeVerifySchema(pParse, iTabDb); sqlite3ViewGetColumnNames(pParse, pTab); for(i=0, pCol=pTab->aCol; inCol; i++, pCol++){ - if( IsHiddenColumn(pCol) ){ + int isHidden = IsHiddenColumn(pCol); + if( isHidden && pPragma->iArg==0 ){ nHidden++; continue; } @@ -115145,13 +121298,14 @@ for(k=1; k<=pTab->nCol && pPk->aiColumn[k-1]!=i; k++){} } assert( pCol->pDflt==0 || pCol->pDflt->op==TK_SPAN ); - sqlite3VdbeMultiLoad(v, 1, "issisi", + sqlite3VdbeMultiLoad(v, 1, pPragma->iArg ? "issisii" : "issisi", i-nHidden, pCol->zName, sqlite3ColumnType(pCol,""), pCol->notNull ? 1 : 0, pCol->pDflt ? pCol->pDflt->u.zToken : 0, - k); + k, + isHidden); } } } @@ -115189,6 +121343,7 @@ Table *pTab; pIdx = sqlite3FindIndex(db, zRight, zDb); if( pIdx ){ + int iIdxDb = sqlite3SchemaToIndex(db, pIdx->pSchema); int i; int mx; if( pPragma->iArg ){ @@ -115201,7 +121356,7 @@ pParse->nMem = 3; } pTab = pIdx->pTable; - sqlite3CodeVerifySchema(pParse, iDb); + sqlite3CodeVerifySchema(pParse, iIdxDb); assert( pParse->nMem<=pPragma->nPragCName ); for(i=0; iaiColumn[i]; @@ -115225,8 +121380,9 @@ int i; pTab = sqlite3FindTable(db, zRight, zDb); if( pTab ){ + int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema); pParse->nMem = 5; - sqlite3CodeVerifySchema(pParse, iDb); + sqlite3CodeVerifySchema(pParse, iTabDb); for(pIdx=pTab->pIndex, i=0; pIdx; pIdx=pIdx->pNext, i++){ const char *azOrigin[] = { "c", "u", "pk" }; sqlite3VdbeMultiLoad(v, 1, "isisi", @@ -115273,14 +121429,13 @@ pParse->nMem = 2; for(i=0; iu.pHash ){ + if( p->funcFlags & SQLITE_FUNC_INTERNAL ) continue; sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 1); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); } } for(j=sqliteHashFirst(&db->aFunc); j; j=sqliteHashNext(j)){ p = (FuncDef*)sqliteHashData(j); sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); } } break; @@ -115292,7 +121447,6 @@ for(j=sqliteHashFirst(&db->aModule); j; j=sqliteHashNext(j)){ Module *pMod = (Module*)sqliteHashData(j); sqlite3VdbeMultiLoad(v, 1, "s", pMod->zName); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1); } } break; @@ -115302,7 +121456,6 @@ int i; for(i=0; ipFKey; if( pFK ){ + int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema); int i = 0; pParse->nMem = 8; - sqlite3CodeVerifySchema(pParse, iDb); + sqlite3CodeVerifySchema(pParse, iTabDb); while(pFK){ int j; for(j=0; jnCol; j++){ @@ -115365,9 +121519,9 @@ pParse->nMem += 4; regKey = ++pParse->nMem; regRow = ++pParse->nMem; - sqlite3CodeVerifySchema(pParse, iDb); k = sqliteHashFirst(&db->aDb[iDb].pSchema->tblHash); while( k ){ + int iTabDb; if( zRight ){ pTab = sqlite3LocateTable(pParse, 0, zRight, zDb); k = 0; @@ -115376,21 +121530,23 @@ k = sqliteHashNext(k); } if( pTab==0 || pTab->pFKey==0 ) continue; - sqlite3TableLock(pParse, iDb, pTab->tnum, 0, pTab->zName); + iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema); + sqlite3CodeVerifySchema(pParse, iTabDb); + sqlite3TableLock(pParse, iTabDb, pTab->tnum, 0, pTab->zName); if( pTab->nCol+regRow>pParse->nMem ) pParse->nMem = pTab->nCol + regRow; - sqlite3OpenTable(pParse, 0, iDb, pTab, OP_OpenRead); + sqlite3OpenTable(pParse, 0, iTabDb, pTab, OP_OpenRead); sqlite3VdbeLoadString(v, regResult, pTab->zName); for(i=1, pFK=pTab->pFKey; pFK; i++, pFK=pFK->pNextFrom){ pParent = sqlite3FindTable(db, pFK->zTo, zDb); if( pParent==0 ) continue; pIdx = 0; - sqlite3TableLock(pParse, iDb, pParent->tnum, 0, pParent->zName); + sqlite3TableLock(pParse, iTabDb, pParent->tnum, 0, pParent->zName); x = sqlite3FkLocateIndex(pParse, pParent, pFK, &pIdx, 0); if( x==0 ){ if( pIdx==0 ){ - sqlite3OpenTable(pParse, i, iDb, pParent, OP_OpenRead); + sqlite3OpenTable(pParse, i, iTabDb, pParent, OP_OpenRead); }else{ - sqlite3VdbeAddOp3(v, OP_OpenRead, i, pIdx->tnum, iDb); + sqlite3VdbeAddOp3(v, OP_OpenRead, i, pIdx->tnum, iTabDb); sqlite3VdbeSetP4KeyInfo(pParse, pIdx); } }else{ @@ -115528,12 +121684,11 @@ /* Do an integrity check on each database file */ for(i=0; inDb; i++){ - HashElem *x; - Hash *pTbls; - int *aRoot; - int cnt = 0; - int mxIdx = 0; - int nIdx; + HashElem *x; /* For looping over tables in the schema */ + Hash *pTbls; /* Set of all tables in the schema */ + int *aRoot; /* Array of root page numbers of all btrees */ + int cnt = 0; /* Number of entries in aRoot[] */ + int mxIdx = 0; /* Maximum number of indexes for any table */ if( OMIT_TEMPDB && i==1 ) continue; if( iDb>=0 && i!=iDb ) continue; @@ -115548,8 +121703,9 @@ assert( sqlite3SchemaMutexHeld(db, i, 0) ); pTbls = &db->aDb[i].pSchema->tblHash; for(cnt=0, x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){ - Table *pTab = sqliteHashData(x); - Index *pIdx; + Table *pTab = sqliteHashData(x); /* Current table */ + Index *pIdx; /* An index on pTab */ + int nIdx; /* Number of indexes on pTab */ if( HasRowid(pTab) ) cnt++; for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ cnt++; } if( nIdx>mxIdx ) mxIdx = nIdx; @@ -115559,12 +121715,12 @@ for(cnt=0, x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){ Table *pTab = sqliteHashData(x); Index *pIdx; - if( HasRowid(pTab) ) aRoot[cnt++] = pTab->tnum; + if( HasRowid(pTab) ) aRoot[++cnt] = pTab->tnum; for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - aRoot[cnt++] = pIdx->tnum; + aRoot[++cnt] = pIdx->tnum; } } - aRoot[cnt] = 0; + aRoot[0] = cnt; /* Make sure sufficient number of registers have been allocated */ pParse->nMem = MAX( pParse->nMem, 8+mxIdx ); @@ -115577,9 +121733,8 @@ sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zDbSName), P4_DYNAMIC); - sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1); - sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2); - integrityCheckResultRow(v, 2); + sqlite3VdbeAddOp3(v, OP_Concat, 2, 3, 3); + integrityCheckResultRow(v); sqlite3VdbeJumpHere(v, addr); /* Make sure all the indices are constructed correctly. @@ -115593,16 +121748,12 @@ int r1 = -1; if( pTab->tnum<1 ) continue; /* Skip VIEWs or VIRTUAL TABLEs */ - if( pTab->pCheck==0 - && (pTab->tabFlags & TF_HasNotNull)==0 - && (pTab->pIndex==0 || isQuick) - ){ - continue; /* No additional checks needed for this table */ - } pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); - sqlite3ExprCacheClear(pParse); sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenRead, 0, 1, 0, &iDataCur, &iIdxCur); + /* reg[7] counts the number of entries in the table. + ** reg[8+i] counts the number of entries in the i-th index + */ sqlite3VdbeAddOp2(v, OP_Integer, 0, 7); for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ sqlite3VdbeAddOp2(v, OP_Integer, 0, 8+j); /* index entries counter */ @@ -115611,6 +121762,11 @@ assert( sqlite3NoTempsInRange(pParse,1,7+j) ); sqlite3VdbeAddOp2(v, OP_Rewind, iDataCur, 0); VdbeCoverage(v); loopTop = sqlite3VdbeAddOp2(v, OP_AddImm, 7, 1); + if( !isQuick ){ + /* Sanity check on record header decoding */ + sqlite3VdbeAddOp3(v, OP_Column, iDataCur, pTab->nCol-1, 3); + sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG); + } /* Verify that all NOT NULL columns really are NOT NULL */ for(j=0; jnCol; j++){ char *zErr; @@ -115623,7 +121779,7 @@ zErr = sqlite3MPrintf(db, "NULL value in %s.%s", pTab->zName, pTab->aCol[j].zName); sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC); - integrityCheckResultRow(v, 3); + integrityCheckResultRow(v); sqlite3VdbeJumpHere(v, jmp2); } /* Verify CHECK constraints */ @@ -115635,7 +121791,6 @@ char *zErr; int k; pParse->iSelfTab = iDataCur + 1; - sqlite3ExprCachePush(pParse); for(k=pCheck->nExpr-1; k>0; k--){ sqlite3ExprIfFalse(pParse, pCheck->a[k].pExpr, addrCkFault, 0); } @@ -115646,57 +121801,58 @@ zErr = sqlite3MPrintf(db, "CHECK constraint failed in %s", pTab->zName); sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC); - integrityCheckResultRow(v, 3); + integrityCheckResultRow(v); sqlite3VdbeResolveLabel(v, addrCkOk); - sqlite3ExprCachePop(pParse); } sqlite3ExprListDelete(db, pCheck); } - /* Validate index entries for the current row */ - for(j=0, pIdx=pTab->pIndex; pIdx && !isQuick; pIdx=pIdx->pNext, j++){ - int jmp2, jmp3, jmp4, jmp5; - int ckUniq = sqlite3VdbeMakeLabel(v); - if( pPk==pIdx ) continue; - r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3, - pPrior, r1); - pPrior = pIdx; - sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1); /* increment entry count */ - /* Verify that an index entry exists for the current table row */ - jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1, - pIdx->nColumn); VdbeCoverage(v); - sqlite3VdbeLoadString(v, 3, "row "); - sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3); - sqlite3VdbeLoadString(v, 4, " missing from index "); - sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); - jmp5 = sqlite3VdbeLoadString(v, 4, pIdx->zName); - sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); - jmp4 = integrityCheckResultRow(v, 3); - sqlite3VdbeJumpHere(v, jmp2); - /* For UNIQUE indexes, verify that only one entry exists with the - ** current key. The entry is unique if (1) any column is NULL - ** or (2) the next entry has a different key */ - if( IsUniqueIndex(pIdx) ){ - int uniqOk = sqlite3VdbeMakeLabel(v); - int jmp6; - int kk; - for(kk=0; kknKeyCol; kk++){ - int iCol = pIdx->aiColumn[kk]; - assert( iCol!=XN_ROWID && iColnCol ); - if( iCol>=0 && pTab->aCol[iCol].notNull ) continue; - sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk); - VdbeCoverage(v); + if( !isQuick ){ /* Omit the remaining tests for quick_check */ + /* Validate index entries for the current row */ + for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ + int jmp2, jmp3, jmp4, jmp5; + int ckUniq = sqlite3VdbeMakeLabel(v); + if( pPk==pIdx ) continue; + r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3, + pPrior, r1); + pPrior = pIdx; + sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1);/* increment entry count */ + /* Verify that an index entry exists for the current table row */ + jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1, + pIdx->nColumn); VdbeCoverage(v); + sqlite3VdbeLoadString(v, 3, "row "); + sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3); + sqlite3VdbeLoadString(v, 4, " missing from index "); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); + jmp5 = sqlite3VdbeLoadString(v, 4, pIdx->zName); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); + jmp4 = integrityCheckResultRow(v); + sqlite3VdbeJumpHere(v, jmp2); + /* For UNIQUE indexes, verify that only one entry exists with the + ** current key. The entry is unique if (1) any column is NULL + ** or (2) the next entry has a different key */ + if( IsUniqueIndex(pIdx) ){ + int uniqOk = sqlite3VdbeMakeLabel(v); + int jmp6; + int kk; + for(kk=0; kknKeyCol; kk++){ + int iCol = pIdx->aiColumn[kk]; + assert( iCol!=XN_ROWID && iColnCol ); + if( iCol>=0 && pTab->aCol[iCol].notNull ) continue; + sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk); + VdbeCoverage(v); + } + jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v); + sqlite3VdbeGoto(v, uniqOk); + sqlite3VdbeJumpHere(v, jmp6); + sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1, + pIdx->nKeyCol); VdbeCoverage(v); + sqlite3VdbeLoadString(v, 3, "non-unique entry in index "); + sqlite3VdbeGoto(v, jmp5); + sqlite3VdbeResolveLabel(v, uniqOk); } - jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v); - sqlite3VdbeGoto(v, uniqOk); - sqlite3VdbeJumpHere(v, jmp6); - sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1, - pIdx->nKeyCol); VdbeCoverage(v); - sqlite3VdbeLoadString(v, 3, "non-unique entry in index "); - sqlite3VdbeGoto(v, jmp5); - sqlite3VdbeResolveLabel(v, uniqOk); + sqlite3VdbeJumpHere(v, jmp4); + sqlite3ResolvePartIdxLabel(pParse, jmp3); } - sqlite3VdbeJumpHere(v, jmp4); - sqlite3ResolvePartIdxLabel(pParse, jmp3); } sqlite3VdbeAddOp2(v, OP_Next, iDataCur, loopTop); VdbeCoverage(v); sqlite3VdbeJumpHere(v, loopTop-1); @@ -115708,9 +121864,9 @@ sqlite3VdbeAddOp2(v, OP_Count, iIdxCur+j, 3); addr = sqlite3VdbeAddOp3(v, OP_Eq, 8+j, 0, 3); VdbeCoverage(v); sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); - sqlite3VdbeLoadString(v, 3, pIdx->zName); - sqlite3VdbeAddOp3(v, OP_Concat, 3, 2, 7); - integrityCheckResultRow(v, 7); + sqlite3VdbeLoadString(v, 4, pIdx->zName); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 2, 3); + integrityCheckResultRow(v); sqlite3VdbeJumpHere(v, addr); } } @@ -115724,6 +121880,9 @@ { OP_IfNotZero, 1, 4, 0}, /* 1 */ { OP_String8, 0, 3, 0}, /* 2 */ { OP_ResultRow, 3, 1, 0}, /* 3 */ + { OP_Halt, 0, 0, 0}, /* 4 */ + { OP_String8, 0, 3, 0}, /* 5 */ + { OP_Goto, 0, 3, 0}, /* 6 */ }; VdbeOp *aOp; @@ -115732,7 +121891,10 @@ aOp[0].p2 = 1-mxErr; aOp[2].p4type = P4_STATIC; aOp[2].p4.z = "ok"; + aOp[5].p4type = P4_STATIC; + aOp[5].p4.z = (char*)sqlite3ErrStr(SQLITE_CORRUPT); } + sqlite3VdbeChangeP3(v, 0, sqlite3VdbeCurrentAddr(v)-2); } } break; @@ -116153,14 +122315,26 @@ #endif #ifdef SQLITE_HAS_CODEC + /* Pragma iArg + ** ---------- ------ + ** key 0 + ** rekey 1 + ** hexkey 2 + ** hexrekey 3 + ** textkey 4 + ** textrekey 5 + */ case PragTyp_KEY: { - if( zRight ) sqlite3_key_v2(db, zDb, zRight, sqlite3Strlen30(zRight)); + if( zRight ){ + int n = pPragma->iArg<4 ? sqlite3Strlen30(zRight) : -1; + if( (pPragma->iArg & 1)==0 ){ + sqlite3_key_v2(db, zDb, zRight, n); + }else{ + sqlite3_rekey_v2(db, zDb, zRight, n); + } + } break; } - case PragTyp_REKEY: { - if( zRight ) sqlite3_rekey_v2(db, zDb, zRight, sqlite3Strlen30(zRight)); - break; - } case PragTyp_HEXKEY: { if( zRight ){ u8 iByte; @@ -116170,7 +122344,7 @@ iByte = (iByte<<4) + sqlite3HexToInt(zRight[i]); if( (i&1)!=0 ) zKey[i/2] = iByte; } - if( (zLeft[3] & 0xf)==0xb ){ + if( (pPragma->iArg & 1)==0 ){ sqlite3_key_v2(db, zDb, zKey, i/2); }else{ sqlite3_rekey_v2(db, zDb, zKey, i/2); @@ -116252,26 +122426,25 @@ UNUSED_PARAMETER(argc); UNUSED_PARAMETER(argv); sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); - sqlite3StrAccumAppendAll(&acc, "CREATE TABLE x"); + sqlite3_str_appendall(&acc, "CREATE TABLE x"); for(i=0, j=pPragma->iPragCName; inPragCName; i++, j++){ - sqlite3XPrintf(&acc, "%c\"%s\"", cSep, pragCName[j]); + sqlite3_str_appendf(&acc, "%c\"%s\"", cSep, pragCName[j]); cSep = ','; } if( i==0 ){ - sqlite3XPrintf(&acc, "(\"%s\"", pPragma->zName); - cSep = ','; + sqlite3_str_appendf(&acc, "(\"%s\"", pPragma->zName); i++; } j = 0; if( pPragma->mPragFlg & PragFlg_Result1 ){ - sqlite3StrAccumAppendAll(&acc, ",arg HIDDEN"); + sqlite3_str_appendall(&acc, ",arg HIDDEN"); j++; } if( pPragma->mPragFlg & (PragFlg_SchemaOpt|PragFlg_SchemaReq) ){ - sqlite3StrAccumAppendAll(&acc, ",schema HIDDEN"); + sqlite3_str_appendall(&acc, ",schema HIDDEN"); j++; } - sqlite3StrAccumAppend(&acc, ")", 1); + sqlite3_str_append(&acc, ")", 1); sqlite3StrAccumFinish(&acc); assert( strlen(zBuf) < sizeof(zBuf)-1 ); rc = sqlite3_declare_vtab(db, zBuf); @@ -116423,13 +122596,13 @@ } } sqlite3StrAccumInit(&acc, 0, 0, 0, pTab->db->aLimit[SQLITE_LIMIT_SQL_LENGTH]); - sqlite3StrAccumAppendAll(&acc, "PRAGMA "); + sqlite3_str_appendall(&acc, "PRAGMA "); if( pCsr->azArg[1] ){ - sqlite3XPrintf(&acc, "%Q.", pCsr->azArg[1]); + sqlite3_str_appendf(&acc, "%Q.", pCsr->azArg[1]); } - sqlite3StrAccumAppendAll(&acc, pTab->pName->zName); + sqlite3_str_appendall(&acc, pTab->pName->zName); if( pCsr->azArg[0] ){ - sqlite3XPrintf(&acc, "=%Q", pCsr->azArg[0]); + sqlite3_str_appendf(&acc, "=%Q", pCsr->azArg[0]); } zSql = sqlite3StrAccumFinish(&acc); if( zSql==0 ) return SQLITE_NOMEM; @@ -116501,7 +122674,8 @@ 0, /* xRename - rename the table */ 0, /* xSavepoint */ 0, /* xRelease */ - 0 /* xRollbackTo */ + 0, /* xRollbackTo */ + 0 /* xShadowName */ }; /* @@ -116552,15 +122726,23 @@ const char *zExtra /* Error information */ ){ sqlite3 *db = pData->db; - if( !db->mallocFailed && (db->flags & SQLITE_WriteSchema)==0 ){ + if( db->mallocFailed ){ + pData->rc = SQLITE_NOMEM_BKPT; + }else if( pData->pzErrMsg[0]!=0 ){ + /* A error message has already been generated. Do not overwrite it */ + }else if( pData->mInitFlags & INITFLAG_AlterTable ){ + *pData->pzErrMsg = sqlite3DbStrDup(db, zExtra); + pData->rc = SQLITE_ERROR; + }else if( db->flags & SQLITE_WriteSchema ){ + pData->rc = SQLITE_CORRUPT_BKPT; + }else{ char *z; if( zObj==0 ) zObj = "?"; z = sqlite3MPrintf(db, "malformed database schema (%s)", zObj); - if( zExtra ) z = sqlite3MPrintf(db, "%z - %s", z, zExtra); - sqlite3DbFree(db, *pData->pzErrMsg); + if( zExtra && zExtra[0] ) z = sqlite3MPrintf(db, "%z - %s", z, zExtra); *pData->pzErrMsg = z; + pData->rc = SQLITE_CORRUPT_BKPT; } - pData->rc = db->mallocFailed ? SQLITE_NOMEM_BKPT : SQLITE_CORRUPT_BKPT; } /* @@ -116612,7 +122794,7 @@ rc = db->errCode; assert( (rc&0xFF)==(rcp&0xFF) ); db->init.iDb = saved_iDb; - assert( saved_iDb==0 || (db->flags & SQLITE_Vacuum)!=0 ); + /* assert( saved_iDb==0 || (db->mDbFlags & DBFLAG_Vacuum)!=0 ); */ if( SQLITE_OK!=rc ){ if( db->init.orphanTrigger ){ assert( iDb==1 ); @@ -116659,7 +122841,7 @@ ** auxiliary databases. Return one of the SQLITE_ error codes to ** indicate success or failure. */ -static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ +SQLITE_PRIVATE int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg, u32 mFlags){ int rc; int i; #ifndef SQLITE_OMIT_DEPRECATED @@ -116672,11 +122854,14 @@ const char *zMasterName; int openedTransaction = 0; + assert( (db->mDbFlags & DBFLAG_SchemaKnownOk)==0 ); assert( iDb>=0 && iDbnDb ); assert( db->aDb[iDb].pSchema ); assert( sqlite3_mutex_held(db->mutex) ); assert( iDb==1 || sqlite3BtreeHoldsMutex(db->aDb[iDb].pBt) ); + db->init.busy = 1; + /* Construct the in-memory representation schema tables (sqlite_master or ** sqlite_temp_master) by invoking the parser directly. The appropriate ** table name will be inserted automatically by the parser so we can just @@ -116685,12 +122870,13 @@ azArg[0] = zMasterName = SCHEMA_TABLE(iDb); azArg[1] = "1"; azArg[2] = "CREATE TABLE x(type text,name text,tbl_name text," - "rootpage integer,sql text)"; + "rootpage int,sql text)"; azArg[3] = 0; initData.db = db; initData.iDb = iDb; initData.rc = SQLITE_OK; initData.pzErrMsg = pzErrMsg; + initData.mInitFlags = mFlags; sqlite3InitCallback(&initData, 3, (char **)azArg, 0); if( initData.rc ){ rc = initData.rc; @@ -116701,10 +122887,10 @@ */ pDb = &db->aDb[iDb]; if( pDb->pBt==0 ){ - if( !OMIT_TEMPDB && ALWAYS(iDb==1) ){ - DbSetProperty(db, 1, DB_SchemaLoaded); - } - return SQLITE_OK; + assert( iDb==1 ); + DbSetProperty(db, 1, DB_SchemaLoaded); + rc = SQLITE_OK; + goto error_out; } /* If there is not already a read-only (or read-write) transaction opened @@ -116712,7 +122898,7 @@ ** will be closed before this function returns. */ sqlite3BtreeEnter(pDb->pBt); if( !sqlite3BtreeIsInReadTrans(pDb->pBt) ){ - rc = sqlite3BtreeBeginTrans(pDb->pBt, 0); + rc = sqlite3BtreeBeginTrans(pDb->pBt, 0, 0); if( rc!=SQLITE_OK ){ sqlite3SetString(pzErrMsg, db, sqlite3ErrStr(rc)); goto initone_error_out; @@ -116740,6 +122926,9 @@ for(i=0; ipBt, i+1, (u32 *)&meta[i]); } + if( (db->flags & SQLITE_ResetDatabase)!=0 ){ + memset(meta, 0, sizeof(meta)); + } pDb->pSchema->schema_cookie = meta[BTREE_SCHEMA_VERSION-1]; /* If opening a non-empty database, check the text encoding. For the @@ -116839,8 +123028,8 @@ rc = SQLITE_NOMEM_BKPT; sqlite3ResetAllSchemasOfConnection(db); } - if( rc==SQLITE_OK || (db->flags&SQLITE_WriteSchema)){ - /* Black magic: If the SQLITE_WriteSchema flag is set, then consider + if( rc==SQLITE_OK || (db->flags&SQLITE_NoSchemaError)){ + /* Black magic: If the SQLITE_NoSchemaError flag is set, then consider ** the schema loaded, even if errors occurred. In this situation the ** current sqlite3_prepare() operation will fail, but the following one ** will attempt to compile the supplied statement against whatever subset @@ -116863,9 +123052,13 @@ sqlite3BtreeLeave(pDb->pBt); error_out: - if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ - sqlite3OomFault(db); + if( rc ){ + if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ + sqlite3OomFault(db); + } + sqlite3ResetOneSchema(db, iDb); } + db->init.busy = 0; return rc; } @@ -116881,42 +123074,30 @@ */ SQLITE_PRIVATE int sqlite3Init(sqlite3 *db, char **pzErrMsg){ int i, rc; - int commit_internal = !(db->flags&SQLITE_InternChanges); + int commit_internal = !(db->mDbFlags&DBFLAG_SchemaChange); assert( sqlite3_mutex_held(db->mutex) ); assert( sqlite3BtreeHoldsMutex(db->aDb[0].pBt) ); assert( db->init.busy==0 ); - rc = SQLITE_OK; - db->init.busy = 1; ENC(db) = SCHEMA_ENC(db); - for(i=0; rc==SQLITE_OK && inDb; i++){ - if( DbHasProperty(db, i, DB_SchemaLoaded) || i==1 ) continue; - rc = sqlite3InitOne(db, i, pzErrMsg); - if( rc ){ - sqlite3ResetOneSchema(db, i); - } + assert( db->nDb>0 ); + /* Do the main schema first */ + if( !DbHasProperty(db, 0, DB_SchemaLoaded) ){ + rc = sqlite3InitOne(db, 0, pzErrMsg, 0); + if( rc ) return rc; } - - /* Once all the other databases have been initialized, load the schema - ** for the TEMP database. This is loaded last, as the TEMP database - ** schema may contain references to objects in other databases. - */ -#ifndef SQLITE_OMIT_TEMPDB - assert( db->nDb>1 ); - if( rc==SQLITE_OK && !DbHasProperty(db, 1, DB_SchemaLoaded) ){ - rc = sqlite3InitOne(db, 1, pzErrMsg); - if( rc ){ - sqlite3ResetOneSchema(db, 1); + /* All other schemas after the main schema. The "temp" schema must be last */ + for(i=db->nDb-1; i>0; i--){ + assert( i==1 || sqlite3BtreeHoldsMutex(db->aDb[i].pBt) ); + if( !DbHasProperty(db, i, DB_SchemaLoaded) ){ + rc = sqlite3InitOne(db, i, pzErrMsg, 0); + if( rc ) return rc; } } -#endif - - db->init.busy = 0; - if( rc==SQLITE_OK && commit_internal ){ + if( commit_internal ){ sqlite3CommitInternalChanges(db); } - - return rc; + return SQLITE_OK; } /* @@ -116929,11 +123110,13 @@ assert( sqlite3_mutex_held(db->mutex) ); if( !db->init.busy ){ rc = sqlite3Init(db, &pParse->zErrMsg); + if( rc!=SQLITE_OK ){ + pParse->rc = rc; + pParse->nErr++; + }else if( db->noSharedCache ){ + db->mDbFlags |= DBFLAG_SchemaKnownOk; + } } - if( rc!=SQLITE_OK ){ - pParse->rc = rc; - pParse->nErr++; - } return rc; } @@ -116960,7 +123143,7 @@ ** on the b-tree database, open one now. If a transaction is opened, it ** will be closed immediately after reading the meta-value. */ if( !sqlite3BtreeIsInReadTrans(pBt) ){ - rc = sqlite3BtreeBeginTrans(pBt, 0); + rc = sqlite3BtreeBeginTrans(pBt, 0, 0); if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ sqlite3OomFault(db); } @@ -117007,7 +123190,8 @@ */ assert( sqlite3_mutex_held(db->mutex) ); if( pSchema ){ - for(i=0; ALWAYS(inDb); i++){ + for(i=0; 1; i++){ + assert( inDb ); if( db->aDb[i].pSchema==pSchema ){ break; } @@ -117021,16 +123205,14 @@ ** Free all memory allocations in the pParse object */ SQLITE_PRIVATE void sqlite3ParserReset(Parse *pParse){ - if( pParse ){ - sqlite3 *db = pParse->db; - sqlite3DbFree(db, pParse->aLabel); - sqlite3ExprListDelete(db, pParse->pConstExpr); - if( db ){ - assert( db->lookaside.bDisable >= pParse->disableLookaside ); - db->lookaside.bDisable -= pParse->disableLookaside; - } - pParse->disableLookaside = 0; + sqlite3 *db = pParse->db; + sqlite3DbFree(db, pParse->aLabel); + sqlite3ExprListDelete(db, pParse->pConstExpr); + if( db ){ + assert( db->lookaside.bDisable >= pParse->disableLookaside ); + db->lookaside.bDisable -= pParse->disableLookaside; } + pParse->disableLookaside = 0; } /* @@ -117144,7 +123326,7 @@ if( rc==SQLITE_OK && sParse.pVdbe && sParse.explain ){ static const char * const azColName[] = { "addr", "opcode", "p1", "p2", "p3", "p4", "p5", "comment", - "selectid", "order", "from", "detail" + "id", "parent", "notused", "detail" }; int iFirst, mx; if( sParse.explain==2 ){ @@ -117190,8 +123372,6 @@ end_prepare: sqlite3ParserReset(&sParse); - rc = sqlite3ApiExit(db, rc); - assert( (rc&db->errMask)==rc ); return rc; } static int sqlite3LockAndPrepare( @@ -117204,6 +123384,7 @@ const char **pzTail /* OUT: End of parsed string */ ){ int rc; + int cnt = 0; #ifdef SQLITE_ENABLE_API_ARMOR if( ppStmt==0 ) return SQLITE_MISUSE_BKPT; @@ -117214,18 +123395,310 @@ } sqlite3_mutex_enter(db->mutex); sqlite3BtreeEnterAll(db); - rc = sqlite3Prepare(db, zSql, nBytes, prepFlags, pOld, ppStmt, pzTail); - if( rc==SQLITE_SCHEMA ){ - sqlite3_finalize(*ppStmt); + do{ + /* Make multiple attempts to compile the SQL, until it either succeeds + ** or encounters a permanent error. A schema problem after one schema + ** reset is considered a permanent error. */ rc = sqlite3Prepare(db, zSql, nBytes, prepFlags, pOld, ppStmt, pzTail); - } + assert( rc==SQLITE_OK || *ppStmt==0 ); + }while( rc==SQLITE_ERROR_RETRY + || (rc==SQLITE_SCHEMA && (sqlite3ResetOneSchema(db,-1), cnt++)==0) ); sqlite3BtreeLeaveAll(db); + rc = sqlite3ApiExit(db, rc); + assert( (rc&db->errMask)==rc ); sqlite3_mutex_leave(db->mutex); - assert( rc==SQLITE_OK || *ppStmt==0 ); return rc; } +#ifdef SQLITE_ENABLE_NORMALIZE /* +** Checks if the specified token is a table, column, or function name, +** based on the databases associated with the statement being prepared. +** If the function fails, zero is returned and pRc is filled with the +** error code. +*/ +static int shouldTreatAsIdentifier( + sqlite3 *db, /* Database handle. */ + const char *zToken, /* Pointer to start of token to be checked */ + int nToken, /* Length of token to be checked */ + int *pRc /* Pointer to error code upon failure */ +){ + int bFound = 0; /* Non-zero if token is an identifier name. */ + int i, j; /* Database and column loop indexes. */ + Schema *pSchema; /* Schema for current database. */ + Hash *pHash; /* Hash table of tables for current database. */ + HashElem *e; /* Hash element for hash table iteration. */ + Table *pTab; /* Database table for columns being checked. */ + + if( sqlite3IsRowidN(zToken, nToken) ){ + return 1; + } + if( nToken>0 ){ + int hash = SQLITE_FUNC_HASH(sqlite3UpperToLower[(u8)zToken[0]], nToken); + if( sqlite3FunctionSearchN(hash, zToken, nToken) ) return 1; + } + assert( db!=0 ); + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + for(i=0; inDb; i++){ + pHash = &db->aFunc; + if( sqlite3HashFindN(pHash, zToken, nToken) ){ + bFound = 1; + break; + } + pSchema = db->aDb[i].pSchema; + if( pSchema==0 ) continue; + pHash = &pSchema->tblHash; + if( sqlite3HashFindN(pHash, zToken, nToken) ){ + bFound = 1; + break; + } + for(e=sqliteHashFirst(pHash); e; e=sqliteHashNext(e)){ + pTab = sqliteHashData(e); + if( pTab==0 ) continue; + pHash = pTab->pColHash; + if( pHash==0 ){ + pTab->pColHash = pHash = sqlite3_malloc(sizeof(Hash)); + if( pHash ){ + sqlite3HashInit(pHash); + for(j=0; jnCol; j++){ + Column *pCol = &pTab->aCol[j]; + sqlite3HashInsert(pHash, pCol->zName, pCol); + } + }else{ + *pRc = SQLITE_NOMEM_BKPT; + bFound = 0; + goto done; + } + } + if( pHash && sqlite3HashFindN(pHash, zToken, nToken) ){ + bFound = 1; + goto done; + } + } + } +done: + sqlite3BtreeLeaveAll(db); + sqlite3_mutex_leave(db->mutex); + return bFound; +} + +/* +** Attempt to estimate the final output buffer size needed for the fully +** normalized version of the specified SQL string. This should take into +** account any potential expansion that could occur (e.g. via IN clauses +** being expanded, etc). This size returned is the total number of bytes +** including the NUL terminator. +*/ +static int estimateNormalizedSize( + const char *zSql, /* The original SQL string */ + int nSql, /* Length of original SQL string */ + u8 prepFlags /* The flags passed to sqlite3_prepare_v3() */ +){ + int nOut = nSql + 4; + const char *z = zSql; + while( nOut0 ){ + zOut[j++] = '"'; + continue; + }else if( k==nToken-1 ){ + zOut[j++] = '"'; + continue; + } + } + if( bKeyword ){ + zOut[j++] = sqlite3Toupper(zSql[iIn+k]); + }else{ + zOut[j++] = sqlite3Tolower(zSql[iIn+k]); + } + } + *piOut = j; +} + +/* +** Perform normalization of the SQL contained in the prepared statement and +** store the result in the zNormSql field. The schema for the associated +** databases are consulted while performing the normalization in order to +** determine if a token appears to be an identifier. All identifiers are +** left intact in the normalized SQL and all literals are replaced with a +** single '?'. +*/ +SQLITE_PRIVATE void sqlite3Normalize( + Vdbe *pVdbe, /* VM being reprepared */ + const char *zSql, /* The original SQL string */ + int nSql, /* Size of the input string in bytes */ + u8 prepFlags /* The flags passed to sqlite3_prepare_v3() */ +){ + sqlite3 *db; /* Database handle. */ + char *z; /* The output string */ + int nZ; /* Size of the output string in bytes */ + int i; /* Next character to read from zSql[] */ + int j; /* Next character to fill in on z[] */ + int tokenType = 0; /* Type of the next token */ + int prevTokenType = 0; /* Type of the previous token, except spaces */ + int n; /* Size of the next token */ + int nParen = 0; /* Nesting level of parenthesis */ + Hash inHash; /* Table of parenthesis levels to output index. */ + + db = sqlite3VdbeDb(pVdbe); + assert( db!=0 ); + assert( pVdbe->zNormSql==0 ); + if( zSql==0 ) return; + nZ = estimateNormalizedSize(zSql, nSql, prepFlags); + z = sqlite3DbMallocRawNN(db, nZ); + if( z==0 ) return; + sqlite3HashInit(&inHash); + for(i=j=0; i0 ){ + sqlite3HashInsert(&inHash, zSql+nParen, 0); + assert( jj+6=0 ); + assert( nZ-1-j=0 ); + /* Fall through */ + } + case TK_MINUS: + case TK_SEMI: + case TK_PLUS: + case TK_STAR: + case TK_SLASH: + case TK_REM: + case TK_EQ: + case TK_LE: + case TK_NE: + case TK_LSHIFT: + case TK_LT: + case TK_RSHIFT: + case TK_GT: + case TK_GE: + case TK_BITOR: + case TK_CONCAT: + case TK_COMMA: + case TK_BITAND: + case TK_BITNOT: + case TK_DOT: + case TK_IN: + case TK_IS: + case TK_NOT: + case TK_NULL: + case TK_ID: { + if( tokenType==TK_NULL ){ + if( prevTokenType==TK_IS || prevTokenType==TK_NOT ){ + /* NULL is a keyword in this case, not a literal value */ + }else{ + /* Here the NULL is a literal value */ + z[j++] = '?'; + break; + } + } + if( j>0 && sqlite3IsIdChar(z[j-1]) && sqlite3IsIdChar(zSql[i]) ){ + z[j++] = ' '; + } + if( tokenType==TK_ID ){ + int i2 = i, n2 = n, rc = SQLITE_OK; + if( nParen>0 ){ + assert( nParen0 && z[j-1]==' ' ){ j--; } + if( j>0 && z[j-1]!=';' ){ z[j++] = ';'; } + z[j] = 0; + assert( jzNormSql = z; + sqlite3HashClear(&inHash); +} +#endif /* SQLITE_ENABLE_NORMALIZE */ + +/* ** Rerun the compilation of a statement after a schema change. ** ** If the statement is successfully recompiled, return SQLITE_OK. Otherwise, @@ -117455,8 +123928,7 @@ /***/ int sqlite3SelectTrace = 0; # define SELECTTRACE(K,P,S,X) \ if(sqlite3SelectTrace&(K)) \ - sqlite3DebugPrintf("%*s%s.%p: ",(P)->nSelectIndent*2-2,"",\ - (S)->zSelName,(S)),\ + sqlite3DebugPrintf("%u/%d/%p: ",(S)->selId,(P)->addrExplain,(S)),\ sqlite3DebugPrintf X #else # define SELECTTRACE(K,P,S,X) @@ -117479,6 +123951,20 @@ /* ** An instance of the following object is used to record information about ** the ORDER BY (or GROUP BY) clause of query is being coded. +** +** The aDefer[] array is used by the sorter-references optimization. For +** example, assuming there is no index that can be used for the ORDER BY, +** for the query: +** +** SELECT a, bigblob FROM t1 ORDER BY a LIMIT 10; +** +** it may be more efficient to add just the "a" values to the sorter, and +** retrieve the associated "bigblob" values directly from table t1 as the +** 10 smallest "a" values are extracted from the sorter. +** +** When the sorter-reference optimization is used, there is one entry in the +** aDefer[] array for each database table that may be read as values are +** extracted from the sorter. */ typedef struct SortCtx SortCtx; struct SortCtx { @@ -117489,8 +123975,17 @@ int labelBkOut; /* Start label for the block-output subroutine */ int addrSortIndex; /* Address of the OP_SorterOpen or OP_OpenEphemeral */ int labelDone; /* Jump here when done, ex: LIMIT reached */ + int labelOBLopt; /* Jump here when sorter is full */ u8 sortFlags; /* Zero or more SORTFLAG_* bits */ - u8 bOrderedInnerLoop; /* ORDER BY correctly sorts the inner loop */ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + u8 nDefer; /* Number of valid entries in aDefer[] */ + struct DeferredCsr { + Table *pTab; /* Table definition */ + int iCsr; /* Cursor number for table */ + int nKey; /* Number of PK columns for table pTab (>=1) */ + } aDefer[4]; +#endif + struct RowLoadInfo *pDeferredRowLoad; /* Deferred row loading info or NULL */ }; #define SORTFLAG_UseSorter 0x01 /* Use SorterOpen instead of OpenEphemeral */ @@ -117508,8 +124003,12 @@ sqlite3ExprDelete(db, p->pHaving); sqlite3ExprListDelete(db, p->pOrderBy); sqlite3ExprDelete(db, p->pLimit); - sqlite3ExprDelete(db, p->pOffset); - if( p->pWith ) sqlite3WithDelete(db, p->pWith); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( OK_IF_ALWAYS_TRUE(p->pWinDefn) ){ + sqlite3WindowListDelete(db, p->pWinDefn); + } +#endif + if( OK_IF_ALWAYS_TRUE(p->pWith) ) sqlite3WithDelete(db, p->pWith); if( bFree ) sqlite3DbFreeNN(db, p); p = pPrior; bFree = 1; @@ -117541,8 +124040,7 @@ Expr *pHaving, /* the HAVING clause */ ExprList *pOrderBy, /* the ORDER BY clause */ u32 selFlags, /* Flag parameters, such as SF_Distinct */ - Expr *pLimit, /* LIMIT value. NULL means not used */ - Expr *pOffset /* OFFSET value. NULL means no offset */ + Expr *pLimit /* LIMIT value. NULL means not used */ ){ Select *pNew; Select standin; @@ -117552,7 +124050,8 @@ pNew = &standin; } if( pEList==0 ){ - pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(pParse->db,TK_ASTERISK,0)); + pEList = sqlite3ExprListAppend(pParse, 0, + sqlite3Expr(pParse->db,TK_ASTERISK,0)); } pNew->pEList = pEList; pNew->op = TK_SELECT; @@ -117559,9 +124058,7 @@ pNew->selFlags = selFlags; pNew->iLimit = 0; pNew->iOffset = 0; -#if SELECTTRACE_ENABLED - pNew->zSelName[0] = 0; -#endif + pNew->selId = ++pParse->nSelect; pNew->addrOpenEphm[0] = -1; pNew->addrOpenEphm[1] = -1; pNew->nSelectRow = 0; @@ -117574,9 +124071,11 @@ pNew->pPrior = 0; pNew->pNext = 0; pNew->pLimit = pLimit; - pNew->pOffset = pOffset; pNew->pWith = 0; - assert( pOffset==0 || pLimit!=0 || pParse->nErr>0 || pParse->db->mallocFailed!=0 ); +#ifndef SQLITE_OMIT_WINDOWFUNC + pNew->pWin = 0; + pNew->pWinDefn = 0; +#endif if( pParse->db->mallocFailed ) { clearSelect(pParse->db, pNew, pNew!=&standin); pNew = 0; @@ -117587,23 +124086,12 @@ return pNew; } -#if SELECTTRACE_ENABLED -/* -** Set the name of a Select object -*/ -SQLITE_PRIVATE void sqlite3SelectSetName(Select *p, const char *zName){ - if( p && zName ){ - sqlite3_snprintf(sizeof(p->zSelName), p->zSelName, "%s", zName); - } -} -#endif - /* ** Delete the given Select structure and all of its substructures. */ SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3 *db, Select *p){ - if( p ) clearSelect(db, p, 1); + if( OK_IF_ALWAYS_TRUE(p) ) clearSelect(db, p, 1); } /* @@ -117820,6 +124308,29 @@ } } +/* Undo the work of setJoinExpr(). In the expression tree p, convert every +** term that is marked with EP_FromJoin and iRightJoinTable==iTable into +** an ordinary term that omits the EP_FromJoin mark. +** +** This happens when a LEFT JOIN is simplified into an ordinary JOIN. +*/ +static void unsetJoinExpr(Expr *p, int iTable){ + while( p ){ + if( ExprHasProperty(p, EP_FromJoin) + && (iTable<0 || p->iRightJoinTable==iTable) ){ + ExprClearProperty(p, EP_FromJoin); + } + if( p->op==TK_FUNCTION && p->x.pList ){ + int i; + for(i=0; ix.pList->nExpr; i++){ + unsetJoinExpr(p->x.pList->a[i].pExpr, iTable); + } + } + unsetJoinExpr(p->pLeft, iTable); + p = p->pRight; + } +} + /* ** This routine processes the join information for a SELECT statement. ** ON and USING clauses are converted into extra terms of the WHERE clause. @@ -117844,11 +124355,10 @@ pLeft = &pSrc->a[0]; pRight = &pLeft[1]; for(i=0; inSrc-1; i++, pRight++, pLeft++){ - Table *pLeftTab = pLeft->pTab; Table *pRightTab = pRight->pTab; int isOuter; - if( NEVER(pLeftTab==0 || pRightTab==0) ) continue; + if( NEVER(pLeft->pTab==0 || pRightTab==0) ) continue; isOuter = (pRight->fg.jointype & JT_OUTER)!=0; /* When the NATURAL keyword is present, add WHERE clause terms for @@ -117922,15 +124432,63 @@ return 0; } -/* Forward reference */ -static KeyInfo *keyInfoFromExprList( - Parse *pParse, /* Parsing context */ - ExprList *pList, /* Form the KeyInfo object from this ExprList */ - int iStart, /* Begin with this column of pList */ - int nExtra /* Add this many extra columns to the end */ -); +/* +** An instance of this object holds information (beyond pParse and pSelect) +** needed to load the next result row that is to be added to the sorter. +*/ +typedef struct RowLoadInfo RowLoadInfo; +struct RowLoadInfo { + int regResult; /* Store results in array of registers here */ + u8 ecelFlags; /* Flag argument to ExprCodeExprList() */ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + ExprList *pExtra; /* Extra columns needed by sorter refs */ + int regExtraResult; /* Where to load the extra columns */ +#endif +}; /* +** This routine does the work of loading query data into an array of +** registers so that it can be added to the sorter. +*/ +static void innerLoopLoadRow( + Parse *pParse, /* Statement under construction */ + Select *pSelect, /* The query being coded */ + RowLoadInfo *pInfo /* Info needed to complete the row load */ +){ + sqlite3ExprCodeExprList(pParse, pSelect->pEList, pInfo->regResult, + 0, pInfo->ecelFlags); +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( pInfo->pExtra ){ + sqlite3ExprCodeExprList(pParse, pInfo->pExtra, pInfo->regExtraResult, 0, 0); + sqlite3ExprListDelete(pParse->db, pInfo->pExtra); + } +#endif +} + +/* +** Code the OP_MakeRecord instruction that generates the entry to be +** added into the sorter. +** +** Return the register in which the result is stored. +*/ +static int makeSorterRecord( + Parse *pParse, + SortCtx *pSort, + Select *pSelect, + int regBase, + int nBase +){ + int nOBSat = pSort->nOBSat; + Vdbe *v = pParse->pVdbe; + int regOut = ++pParse->nMem; + if( pSort->pDeferredRowLoad ){ + innerLoopLoadRow(pParse, pSelect, pSort->pDeferredRowLoad); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regOut); + return regOut; +} + +/* ** Generate code that will push the record in registers regData ** through regData+nData-1 onto the sorter. */ @@ -117940,7 +124498,7 @@ Select *pSelect, /* The whole SELECT statement */ int regData, /* First register holding data to be sorted */ int regOrigData, /* First register holding data before packing */ - int nData, /* Number of elements in the data array */ + int nData, /* Number of elements in the regData data array */ int nPrefixReg /* No. of reg prior to regData available for use */ ){ Vdbe *v = pParse->pVdbe; /* Stmt under construction */ @@ -117948,16 +124506,32 @@ int nExpr = pSort->pOrderBy->nExpr; /* No. of ORDER BY terms */ int nBase = nExpr + bSeq + nData; /* Fields in sorter record */ int regBase; /* Regs for sorter record */ - int regRecord = ++pParse->nMem; /* Assembled sorter record */ + int regRecord = 0; /* Assembled sorter record */ int nOBSat = pSort->nOBSat; /* ORDER BY terms to skip */ int op; /* Opcode to add sorter record to sorter */ int iLimit; /* LIMIT counter */ + int iSkip = 0; /* End of the sorter insert loop */ assert( bSeq==0 || bSeq==1 ); + + /* Three cases: + ** (1) The data to be sorted has already been packed into a Record + ** by a prior OP_MakeRecord. In this case nData==1 and regData + ** will be completely unrelated to regOrigData. + ** (2) All output columns are included in the sort record. In that + ** case regData==regOrigData. + ** (3) Some output columns are omitted from the sort record due to + ** the SQLITE_ENABLE_SORTER_REFERENCE optimization, or due to the + ** SQLITE_ECEL_OMITREF optimization, or due to the + ** SortCtx.pDeferredRowLoad optimiation. In any of these cases + ** regOrigData is 0 to prevent this routine from trying to copy + ** values that might not yet exist. + */ assert( nData==1 || regData==regOrigData || regOrigData==0 ); + if( nPrefixReg ){ assert( nPrefixReg==nExpr+bSeq ); - regBase = regData - nExpr - bSeq; + regBase = regData - nPrefixReg; }else{ regBase = pParse->nMem + 1; pParse->nMem += nBase; @@ -117973,7 +124547,6 @@ if( nPrefixReg==0 && nData>0 ){ sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData); } - sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regRecord); if( nOBSat>0 ){ int regPrevKey; /* The first nOBSat columns of the previous row */ int addrFirst; /* Address of the OP_IfNot opcode */ @@ -117982,6 +124555,7 @@ int nKey; /* Number of sorting key columns, including OP_Sequence */ KeyInfo *pKI; /* Original KeyInfo on the sorter table */ + regRecord = makeSorterRecord(pParse, pSort, pSelect, regBase, nBase); regPrevKey = pParse->nMem+1; pParse->nMem += pSort->nOBSat; nKey = nExpr - pSort->nOBSat + bSeq; @@ -117996,11 +124570,11 @@ if( pParse->db->mallocFailed ) return; pOp->p2 = nKey + nData; pKI = pOp->p4.pKeyInfo; - memset(pKI->aSortOrder, 0, pKI->nField); /* Makes OP_Jump below testable */ + memset(pKI->aSortOrder, 0, pKI->nKeyField); /* Makes OP_Jump testable */ sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO); - testcase( pKI->nXField>2 ); - pOp->p4.pKeyInfo = keyInfoFromExprList(pParse, pSort->pOrderBy, nOBSat, - pKI->nXField-1); + testcase( pKI->nAllField > pKI->nKeyField+2 ); + pOp->p4.pKeyInfo = sqlite3KeyInfoFromExprList(pParse,pSort->pOrderBy,nOBSat, + pKI->nAllField-pKI->nKeyField-1); addrJmp = sqlite3VdbeCurrentAddr(v); sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v); pSort->labelBkOut = sqlite3VdbeMakeLabel(v); @@ -118015,6 +124589,34 @@ sqlite3ExprCodeMove(pParse, regBase, regPrevKey, pSort->nOBSat); sqlite3VdbeJumpHere(v, addrJmp); } + if( iLimit ){ + /* At this point the values for the new sorter entry are stored + ** in an array of registers. They need to be composed into a record + ** and inserted into the sorter if either (a) there are currently + ** less than LIMIT+OFFSET items or (b) the new record is smaller than + ** the largest record currently in the sorter. If (b) is true and there + ** are already LIMIT+OFFSET items in the sorter, delete the largest + ** entry before inserting the new one. This way there are never more + ** than LIMIT+OFFSET items in the sorter. + ** + ** If the new record does not need to be inserted into the sorter, + ** jump to the next iteration of the loop. If the pSort->labelOBLopt + ** value is not zero, then it is a label of where to jump. Otherwise, + ** just bypass the row insert logic. See the header comment on the + ** sqlite3WhereOrderByLimitOptLabel() function for additional info. + */ + int iCsr = pSort->iECursor; + sqlite3VdbeAddOp2(v, OP_IfNotZero, iLimit, sqlite3VdbeCurrentAddr(v)+4); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Last, iCsr, 0); + iSkip = sqlite3VdbeAddOp4Int(v, OP_IdxLE, + iCsr, 0, regBase+nOBSat, nExpr-nOBSat); + VdbeCoverage(v); + sqlite3VdbeAddOp1(v, OP_Delete, iCsr); + } + if( regRecord==0 ){ + regRecord = makeSorterRecord(pParse, pSort, pSelect, regBase, nBase); + } if( pSort->sortFlags & SORTFLAG_UseSorter ){ op = OP_SorterInsert; }else{ @@ -118022,33 +124624,9 @@ } sqlite3VdbeAddOp4Int(v, op, pSort->iECursor, regRecord, regBase+nOBSat, nBase-nOBSat); - if( iLimit ){ - int addr; - int r1 = 0; - /* Fill the sorter until it contains LIMIT+OFFSET entries. (The iLimit - ** register is initialized with value of LIMIT+OFFSET.) After the sorter - ** fills up, delete the least entry in the sorter after each insert. - ** Thus we never hold more than the LIMIT+OFFSET rows in memory at once */ - addr = sqlite3VdbeAddOp1(v, OP_IfNotZero, iLimit); VdbeCoverage(v); - sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor); - if( pSort->bOrderedInnerLoop ){ - r1 = ++pParse->nMem; - sqlite3VdbeAddOp3(v, OP_Column, pSort->iECursor, nExpr, r1); - VdbeComment((v, "seq")); - } - sqlite3VdbeAddOp1(v, OP_Delete, pSort->iECursor); - if( pSort->bOrderedInnerLoop ){ - /* If the inner loop is driven by an index such that values from - ** the same iteration of the inner loop are in sorted order, then - ** immediately jump to the next iteration of an inner loop if the - ** entry from the current iteration does not fit into the top - ** LIMIT+OFFSET entries of the sorter. */ - int iBrk = sqlite3VdbeCurrentAddr(v) + 2; - sqlite3VdbeAddOp3(v, OP_Eq, regBase+nExpr, iBrk, r1); - sqlite3VdbeChangeP5(v, SQLITE_NULLEQ); - VdbeCoverage(v); - } - sqlite3VdbeJumpHere(v, addr); + if( iSkip ){ + sqlite3VdbeChangeP2(v, iSkip, + pSort->labelOBLopt ? pSort->labelOBLopt : sqlite3VdbeCurrentAddr(v)); } } @@ -118094,20 +124672,100 @@ sqlite3ReleaseTempReg(pParse, r1); } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES /* +** This function is called as part of inner-loop generation for a SELECT +** statement with an ORDER BY that is not optimized by an index. It +** determines the expressions, if any, that the sorter-reference +** optimization should be used for. The sorter-reference optimization +** is used for SELECT queries like: +** +** SELECT a, bigblob FROM t1 ORDER BY a LIMIT 10 +** +** If the optimization is used for expression "bigblob", then instead of +** storing values read from that column in the sorter records, the PK of +** the row from table t1 is stored instead. Then, as records are extracted from +** the sorter to return to the user, the required value of bigblob is +** retrieved directly from table t1. If the values are very large, this +** can be more efficient than storing them directly in the sorter records. +** +** The ExprList_item.bSorterRef flag is set for each expression in pEList +** for which the sorter-reference optimization should be enabled. +** Additionally, the pSort->aDefer[] array is populated with entries +** for all cursors required to evaluate all selected expressions. Finally. +** output variable (*ppExtra) is set to an expression list containing +** expressions for all extra PK values that should be stored in the +** sorter records. +*/ +static void selectExprDefer( + Parse *pParse, /* Leave any error here */ + SortCtx *pSort, /* Sorter context */ + ExprList *pEList, /* Expressions destined for sorter */ + ExprList **ppExtra /* Expressions to append to sorter record */ +){ + int i; + int nDefer = 0; + ExprList *pExtra = 0; + for(i=0; inExpr; i++){ + struct ExprList_item *pItem = &pEList->a[i]; + if( pItem->u.x.iOrderByCol==0 ){ + Expr *pExpr = pItem->pExpr; + Table *pTab = pExpr->y.pTab; + if( pExpr->op==TK_COLUMN && pExpr->iColumn>=0 && pTab && !IsVirtual(pTab) + && (pTab->aCol[pExpr->iColumn].colFlags & COLFLAG_SORTERREF) + ){ + int j; + for(j=0; jaDefer[j].iCsr==pExpr->iTable ) break; + } + if( j==nDefer ){ + if( nDefer==ArraySize(pSort->aDefer) ){ + continue; + }else{ + int nKey = 1; + int k; + Index *pPk = 0; + if( !HasRowid(pTab) ){ + pPk = sqlite3PrimaryKeyIndex(pTab); + nKey = pPk->nKeyCol; + } + for(k=0; kiTable = pExpr->iTable; + pNew->y.pTab = pExpr->y.pTab; + pNew->iColumn = pPk ? pPk->aiColumn[k] : -1; + pExtra = sqlite3ExprListAppend(pParse, pExtra, pNew); + } + } + pSort->aDefer[nDefer].pTab = pExpr->y.pTab; + pSort->aDefer[nDefer].iCsr = pExpr->iTable; + pSort->aDefer[nDefer].nKey = nKey; + nDefer++; + } + } + pItem->bSorterRef = 1; + } + } + } + pSort->nDefer = (u8)nDefer; + *ppExtra = pExtra; +} +#endif + +/* ** This routine generates the code for the inside of the inner loop ** of a SELECT. ** -** If srcTab is negative, then the pEList expressions +** If srcTab is negative, then the p->pEList expressions ** are evaluated in order to get the data for this row. If srcTab is -** zero or more, then data is pulled from srcTab and pEList is used only +** zero or more, then data is pulled from srcTab and p->pEList is used only ** to get the number of columns and the collation sequence for each column. */ static void selectInnerLoop( Parse *pParse, /* The parser context */ Select *p, /* The complete select statement being coded */ - ExprList *pEList, /* List of values being extracted */ - int srcTab, /* Pull data from this table */ + int srcTab, /* Pull data from this table if non-negative */ SortCtx *pSort, /* If not NULL, info on how to process ORDER BY */ DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */ SelectDest *pDest, /* How to dispose of the results */ @@ -118121,6 +124779,7 @@ int iParm = pDest->iSDParm; /* First argument to disposal method */ int nResultCol; /* Number of result columns */ int nPrefixReg = 0; /* Number of extra registers before regResult */ + RowLoadInfo sRowLoadInfo; /* Info for deferred row loading */ /* Usually, regResult is the first cell in an array of memory cells ** containing the current result row. In this case regOrig is set to the @@ -118131,7 +124790,7 @@ int regOrig; /* Start of memory holding full result (or 0) */ assert( v ); - assert( pEList!=0 ); + assert( p->pEList!=0 ); hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP; if( pSort && pSort->pOrderBy==0 ) pSort = 0; if( pSort==0 && !hasDistinct ){ @@ -118141,7 +124800,7 @@ /* Pull the requested columns. */ - nResultCol = pEList->nExpr; + nResultCol = p->pEList->nExpr; if( pDest->iSdst==0 ){ if( pSort ){ @@ -118164,13 +124823,17 @@ if( srcTab>=0 ){ for(i=0; ia[i].zName)); + VdbeComment((v, "%s", p->pEList->a[i].zName)); } }else if( eDest!=SRT_Exists ){ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + ExprList *pExtra = 0; +#endif /* If the destination is an EXISTS(...) expression, the actual ** values returned by the SELECT are not required. */ - u8 ecelFlags; + u8 ecelFlags; /* "ecel" is an abbreviation of "ExprCodeExprList" */ + ExprList *pEList; if( eDest==SRT_Mem || eDest==SRT_Output || eDest==SRT_Coroutine ){ ecelFlags = SQLITE_ECEL_DUP; }else{ @@ -118177,24 +124840,75 @@ ecelFlags = 0; } if( pSort && hasDistinct==0 && eDest!=SRT_EphemTab && eDest!=SRT_Table ){ - /* For each expression in pEList that is a copy of an expression in + /* For each expression in p->pEList that is a copy of an expression in ** the ORDER BY clause (pSort->pOrderBy), set the associated ** iOrderByCol value to one more than the index of the ORDER BY ** expression within the sort-key that pushOntoSorter() will generate. - ** This allows the pEList field to be omitted from the sorted record, + ** This allows the p->pEList field to be omitted from the sorted record, ** saving space and CPU cycles. */ ecelFlags |= (SQLITE_ECEL_OMITREF|SQLITE_ECEL_REF); + for(i=pSort->nOBSat; ipOrderBy->nExpr; i++){ int j; if( (j = pSort->pOrderBy->a[i].u.x.iOrderByCol)>0 ){ - pEList->a[j-1].u.x.iOrderByCol = i+1-pSort->nOBSat; + p->pEList->a[j-1].u.x.iOrderByCol = i+1-pSort->nOBSat; } } - regOrig = 0; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + selectExprDefer(pParse, pSort, p->pEList, &pExtra); + if( pExtra && pParse->db->mallocFailed==0 ){ + /* If there are any extra PK columns to add to the sorter records, + ** allocate extra memory cells and adjust the OpenEphemeral + ** instruction to account for the larger records. This is only + ** required if there are one or more WITHOUT ROWID tables with + ** composite primary keys in the SortCtx.aDefer[] array. */ + VdbeOp *pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex); + pOp->p2 += (pExtra->nExpr - pSort->nDefer); + pOp->p4.pKeyInfo->nAllField += (pExtra->nExpr - pSort->nDefer); + pParse->nMem += pExtra->nExpr; + } +#endif + + /* Adjust nResultCol to account for columns that are omitted + ** from the sorter by the optimizations in this branch */ + pEList = p->pEList; + for(i=0; inExpr; i++){ + if( pEList->a[i].u.x.iOrderByCol>0 +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + || pEList->a[i].bSorterRef +#endif + ){ + nResultCol--; + regOrig = 0; + } + } + + testcase( regOrig ); + testcase( eDest==SRT_Set ); + testcase( eDest==SRT_Mem ); + testcase( eDest==SRT_Coroutine ); + testcase( eDest==SRT_Output ); assert( eDest==SRT_Set || eDest==SRT_Mem || eDest==SRT_Coroutine || eDest==SRT_Output ); } - nResultCol = sqlite3ExprCodeExprList(pParse,pEList,regResult,0,ecelFlags); + sRowLoadInfo.regResult = regResult; + sRowLoadInfo.ecelFlags = ecelFlags; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + sRowLoadInfo.pExtra = pExtra; + sRowLoadInfo.regExtraResult = regResult + nResultCol; + if( pExtra ) nResultCol += pExtra->nExpr; +#endif + if( p->iLimit + && (ecelFlags & SQLITE_ECEL_OMITREF)!=0 + && nPrefixReg>0 + ){ + assert( pSort!=0 ); + assert( hasDistinct==0 ); + pSort->pDeferredRowLoad = &sRowLoadInfo; + regOrig = 0; + }else{ + innerLoopLoadRow(pParse, p, &sRowLoadInfo); + } } /* If the DISTINCT keyword was present on the SELECT statement @@ -118226,7 +124940,7 @@ iJump = sqlite3VdbeCurrentAddr(v) + nResultCol; for(i=0; ia[i].pExpr); + CollSeq *pColl = sqlite3ExprCollSeq(pParse, p->pEList->a[i].pExpr); if( izAffSdst)==nResultCol ); sqlite3VdbeAddOp4(v, OP_MakeRecord, regResult, nResultCol, r1, pDest->zAffSdst, nResultCol); - sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol); sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, r1, regResult, nResultCol); sqlite3ReleaseTempReg(pParse, r1); } @@ -118384,7 +125098,6 @@ sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); }else{ sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, nResultCol); - sqlite3ExprCacheAffinityChange(pParse, regResult, nResultCol); } break; } @@ -118469,8 +125182,8 @@ KeyInfo *p = sqlite3DbMallocRawNN(db, sizeof(KeyInfo) + nExtra); if( p ){ p->aSortOrder = (u8*)&p->aColl[N+X]; - p->nField = (u16)N; - p->nXField = (u16)X; + p->nKeyField = (u16)N; + p->nAllField = (u16)(N+X); p->enc = ENC(db); p->db = db; p->nRef = 1; @@ -118527,7 +125240,7 @@ ** function is responsible for seeing that this structure is eventually ** freed. */ -static KeyInfo *keyInfoFromExprList( +SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoFromExprList( Parse *pParse, /* Parsing context */ ExprList *pList, /* Form the KeyInfo object from this ExprList */ int iStart, /* Begin with this column of pList */ @@ -118544,10 +125257,7 @@ if( pInfo ){ assert( sqlite3KeyInfoIsWriteable(pInfo) ); for(i=iStart, pItem=pList->a+iStart; ipExpr); - if( !pColl ) pColl = db->pDfltColl; - pInfo->aColl[i-iStart] = pColl; + pInfo->aColl[i-iStart] = sqlite3ExprNNCollSeq(pParse, pItem->pExpr); pInfo->aSortOrder[i-iStart] = pItem->sortOrder; } } @@ -118580,11 +125290,7 @@ ** is determined by the zUsage argument. */ static void explainTempTable(Parse *pParse, const char *zUsage){ - if( pParse->explain==2 ){ - Vdbe *v = pParse->pVdbe; - char *zMsg = sqlite3MPrintf(pParse->db, "USE TEMP B-TREE FOR %s", zUsage); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } + ExplainQueryPlan((pParse, 0, "USE TEMP B-TREE FOR %s", zUsage)); } /* @@ -118602,42 +125308,6 @@ # define explainSetInteger(y,z) #endif -#if !defined(SQLITE_OMIT_EXPLAIN) && !defined(SQLITE_OMIT_COMPOUND_SELECT) -/* -** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function -** is a no-op. Otherwise, it adds a single row of output to the EQP result, -** where the caption is of one of the two forms: -** -** "COMPOSITE SUBQUERIES iSub1 and iSub2 (op)" -** "COMPOSITE SUBQUERIES iSub1 and iSub2 USING TEMP B-TREE (op)" -** -** where iSub1 and iSub2 are the integers passed as the corresponding -** function parameters, and op is the text representation of the parameter -** of the same name. The parameter "op" must be one of TK_UNION, TK_EXCEPT, -** TK_INTERSECT or TK_ALL. The first form is used if argument bUseTmp is -** false, or the second form if it is true. -*/ -static void explainComposite( - Parse *pParse, /* Parse context */ - int op, /* One of TK_UNION, TK_EXCEPT etc. */ - int iSub1, /* Subquery id 1 */ - int iSub2, /* Subquery id 2 */ - int bUseTmp /* True if a temp table was used */ -){ - assert( op==TK_UNION || op==TK_EXCEPT || op==TK_INTERSECT || op==TK_ALL ); - if( pParse->explain==2 ){ - Vdbe *v = pParse->pVdbe; - char *zMsg = sqlite3MPrintf( - pParse->db, "COMPOUND SUBQUERIES %d AND %d %s(%s)", iSub1, iSub2, - bUseTmp?"USING TEMP B-TREE ":"", selectOpName(op) - ); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } -} -#else -/* No-op versions of the explainXXX() functions and macros. */ -# define explainComposite(v,w,x,y,z) -#endif /* ** If the inner loop was generated using a non-null pOrderBy argument, @@ -118655,7 +125325,7 @@ Vdbe *v = pParse->pVdbe; /* The prepared statement */ int addrBreak = pSort->labelDone; /* Jump here to exit loop */ int addrContinue = sqlite3VdbeMakeLabel(v); /* Jump here for next cycle */ - int addr; + int addr; /* Top of output loop. Jump for Next. */ int addrOnce = 0; int iTab; ExprList *pOrderBy = pSort->pOrderBy; @@ -118664,11 +125334,11 @@ int regRow; int regRowid; int iCol; - int nKey; + int nKey; /* Number of key columns in sorter record */ int iSortTab; /* Sorter cursor to read from */ - int nSortData; /* Trailing values to read from sorter */ int i; int bSeq; /* True if sorter record includes seq. no. */ + int nRefKey = 0; struct ExprList_item *aOutEx = p->pEList->a; assert( addrBreak<0 ); @@ -118677,15 +125347,24 @@ sqlite3VdbeGoto(v, addrBreak); sqlite3VdbeResolveLabel(v, pSort->labelBkOut); } + +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + /* Open any cursors needed for sorter-reference expressions */ + for(i=0; inDefer; i++){ + Table *pTab = pSort->aDefer[i].pTab; + int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + sqlite3OpenTable(pParse, pSort->aDefer[i].iCsr, iDb, pTab, OP_OpenRead); + nRefKey = MAX(nRefKey, pSort->aDefer[i].nKey); + } +#endif + iTab = pSort->iECursor; if( eDest==SRT_Output || eDest==SRT_Coroutine || eDest==SRT_Mem ){ regRowid = 0; regRow = pDest->iSdst; - nSortData = nColumn; }else{ regRowid = sqlite3GetTempReg(pParse); regRow = sqlite3GetTempRange(pParse, nColumn); - nSortData = nColumn; } nKey = pOrderBy->nExpr - pSort->nOBSat; if( pSort->sortFlags & SORTFLAG_UseSorter ){ @@ -118694,7 +125373,8 @@ if( pSort->labelBkOut ){ addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); } - sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, nKey+1+nSortData); + sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, + nKey+1+nColumn+nRefKey); if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); addr = 1 + sqlite3VdbeAddOp2(v, OP_SorterSort, iTab, addrBreak); VdbeCoverage(v); @@ -118707,16 +125387,60 @@ iSortTab = iTab; bSeq = 1; } - for(i=0, iCol=nKey+bSeq; inDefer ){ + int iKey = iCol+1; + int regKey = sqlite3GetTempRange(pParse, nRefKey); + + for(i=0; inDefer; i++){ + int iCsr = pSort->aDefer[i].iCsr; + Table *pTab = pSort->aDefer[i].pTab; + int nKey = pSort->aDefer[i].nKey; + + sqlite3VdbeAddOp1(v, OP_NullRow, iCsr); + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iKey++, regKey); + sqlite3VdbeAddOp3(v, OP_SeekRowid, iCsr, + sqlite3VdbeCurrentAddr(v)+1, regKey); + }else{ + int k; + int iJmp; + assert( sqlite3PrimaryKeyIndex(pTab)->nKeyCol==nKey ); + for(k=0; k=0; i--){ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( aOutEx[i].bSorterRef ){ + sqlite3ExprCode(pParse, aOutEx[i].pExpr, regRow+i); + }else +#endif + { + int iRead; + if( aOutEx[i].u.x.iOrderByCol ){ + iRead = aOutEx[i].u.x.iOrderByCol-1; + }else{ + iRead = iCol--; + } + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iRead, regRow+i); + VdbeComment((v, "%s", aOutEx[i].zName?aOutEx[i].zName : aOutEx[i].zSpan)); + } + } switch( eDest ){ case SRT_Table: case SRT_EphemTab: { @@ -118730,7 +125454,6 @@ assert( nColumn==sqlite3Strlen30(pDest->zAffSdst) ); sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, nColumn, regRowid, pDest->zAffSdst, nColumn); - sqlite3ExprCacheAffinityChange(pParse, regRow, nColumn); sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iParm, regRowid, regRow, nColumn); break; } @@ -118745,7 +125468,6 @@ testcase( eDest==SRT_Coroutine ); if( eDest==SRT_Output ){ sqlite3VdbeAddOp2(v, OP_ResultRow, pDest->iSdst, nColumn); - sqlite3ExprCacheAffinityChange(pParse, pDest->iSdst, nColumn); }else{ sqlite3VdbeAddOp1(v, OP_Yield, pDest->iSDParm); } @@ -118797,23 +125519,23 @@ ** the SQLITE_ENABLE_COLUMN_METADATA compile-time option is used. */ #ifdef SQLITE_ENABLE_COLUMN_METADATA -# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,C,D,E,F) +# define columnType(A,B,C,D,E) columnTypeImpl(A,B,C,D,E) #else /* if !defined(SQLITE_ENABLE_COLUMN_METADATA) */ -# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,F) +# define columnType(A,B,C,D,E) columnTypeImpl(A,B) #endif static const char *columnTypeImpl( NameContext *pNC, +#ifndef SQLITE_ENABLE_COLUMN_METADATA + Expr *pExpr +#else Expr *pExpr, -#ifdef SQLITE_ENABLE_COLUMN_METADATA const char **pzOrigDb, const char **pzOrigTab, - const char **pzOrigCol, + const char **pzOrigCol #endif - u8 *pEstWidth ){ char const *zType = 0; int j; - u8 estWidth = 1; #ifdef SQLITE_ENABLE_COLUMN_METADATA char const *zOrigDb = 0; char const *zOrigTab = 0; @@ -118822,8 +125544,9 @@ assert( pExpr!=0 ); assert( pNC->pSrcList!=0 ); + assert( pExpr->op!=TK_AGG_COLUMN ); /* This routine runes before aggregates + ** are processed */ switch( pExpr->op ){ - case TK_AGG_COLUMN: case TK_COLUMN: { /* The expression is a column. Locate the table the column is being ** extracted from in NameContext.pSrcList. This table may be real @@ -118832,8 +125555,6 @@ Table *pTab = 0; /* Table structure column is extracted from */ Select *pS = 0; /* Select the column is extracted from */ int iCol = pExpr->iColumn; /* Index of column in pTab */ - testcase( pExpr->op==TK_AGG_COLUMN ); - testcase( pExpr->op==TK_COLUMN ); while( pNC && !pTab ){ SrcList *pTabList = pNC->pSrcList; for(j=0;jnSrc && pTabList->a[j].iCursor!=pExpr->iTable;j++); @@ -118866,7 +125587,7 @@ break; } - assert( pTab && pExpr->pTab==pTab ); + assert( pTab && pExpr->y.pTab==pTab ); if( pS ){ /* The "table" is actually a sub-select or a view in the FROM clause ** of the SELECT statement. Return the declaration type and origin @@ -118882,14 +125603,14 @@ sNC.pSrcList = pS->pSrc; sNC.pNext = pNC; sNC.pParse = pNC->pParse; - zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol, &estWidth); + zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol); } - }else if( pTab->pSchema ){ - /* A real table */ + }else{ + /* A real table or a CTE table */ assert( !pS ); +#ifdef SQLITE_ENABLE_COLUMN_METADATA if( iCol<0 ) iCol = pTab->iPKey; - assert( iCol==-1 || (iCol>=0 && iColnCol) ); -#ifdef SQLITE_ENABLE_COLUMN_METADATA + assert( iCol==XN_ROWID || (iCol>=0 && iColnCol) ); if( iCol<0 ){ zType = "INTEGER"; zOrigCol = "rowid"; @@ -118896,19 +125617,18 @@ }else{ zOrigCol = pTab->aCol[iCol].zName; zType = sqlite3ColumnType(&pTab->aCol[iCol],0); - estWidth = pTab->aCol[iCol].szEst; } zOrigTab = pTab->zName; - if( pNC->pParse ){ + if( pNC->pParse && pTab->pSchema ){ int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema); zOrigDb = pNC->pParse->db->aDb[iDb].zDbSName; } #else + assert( iCol==XN_ROWID || (iCol>=0 && iColnCol) ); if( iCol<0 ){ zType = "INTEGER"; }else{ zType = sqlite3ColumnType(&pTab->aCol[iCol],0); - estWidth = pTab->aCol[iCol].szEst; } #endif } @@ -118927,7 +125647,7 @@ sNC.pSrcList = pS->pSrc; sNC.pNext = pNC; sNC.pParse = pNC->pParse; - zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, &estWidth); + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol); break; } #endif @@ -118941,7 +125661,6 @@ *pzOrigCol = zOrigCol; } #endif - if( pEstWidth ) *pEstWidth = estWidth; return zType; } @@ -118968,7 +125687,7 @@ const char *zOrigDb = 0; const char *zOrigTab = 0; const char *zOrigCol = 0; - zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, 0); + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol); /* The vdbe must make its own copy of the column-type and other ** column specific strings, in case the schema is reset before this @@ -118978,7 +125697,7 @@ sqlite3VdbeSetColName(v, i, COLNAME_TABLE, zOrigTab, SQLITE_TRANSIENT); sqlite3VdbeSetColName(v, i, COLNAME_COLUMN, zOrigCol, SQLITE_TRANSIENT); #else - zType = columnType(&sNC, p, 0, 0, 0, 0); + zType = columnType(&sNC, p, 0, 0, 0); #endif sqlite3VdbeSetColName(v, i, COLNAME_DECLTYPE, zType, SQLITE_TRANSIENT); } @@ -119008,9 +125727,9 @@ ** other words, the zSpan of the result expression. ** ** short=ON, full=OFF: (This is the default setting). If the result -** refers directly to a table column, then the result -** column name is just the table column name: COLUMN. -** Otherwise use zSpan. +** refers directly to a table column, then the +** result column name is just the table column +** name: COLUMN. Otherwise use zSpan. ** ** full=ON, short=ANY: If the result refers directly to a table column, ** then the result column name with the table name @@ -119036,9 +125755,10 @@ } #endif - if( pParse->colNamesSet || db->mallocFailed ) return; + if( pParse->colNamesSet ) return; /* Column names are determined by the left-most term of a compound select */ while( pSelect->pPrior ) pSelect = pSelect->pPrior; + SELECTTRACE(1,pParse,pSelect,("generating column names\n")); pTabList = pSelect->pSrc; pEList = pSelect->pEList; assert( v!=0 ); @@ -119051,6 +125771,8 @@ Expr *p = pEList->a[i].pExpr; assert( p!=0 ); + assert( p->op!=TK_AGG_COLUMN ); /* Agg processing has not run yet */ + assert( p->op!=TK_COLUMN || p->y.pTab!=0 ); /* Covering idx not yet coded */ if( pEList->a[i].zName ){ /* An AS clause always takes first priority */ char *zName = pEList->a[i].zName; @@ -119058,7 +125780,7 @@ }else if( srcName && p->op==TK_COLUMN ){ char *zCol; int iCol = p->iColumn; - pTab = p->pTab; + pTab = p->y.pTab; assert( pTab!=0 ); if( iCol<0 ) iCol = pTab->iPKey; assert( iCol==-1 || (iCol>=0 && iColnCol) ); @@ -119125,6 +125847,7 @@ nCol = pEList->nExpr; aCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol); testcase( aCol==0 ); + if( nCol>32767 ) nCol = 32767; }else{ nCol = 0; aCol = 0; @@ -119144,10 +125867,12 @@ pColExpr = pColExpr->pRight; assert( pColExpr!=0 ); } - if( pColExpr->op==TK_COLUMN && pColExpr->pTab!=0 ){ + assert( pColExpr->op!=TK_AGG_COLUMN ); + if( pColExpr->op==TK_COLUMN ){ /* For columns use the column name name */ int iCol = pColExpr->iColumn; - Table *pTab = pColExpr->pTab; + Table *pTab = pColExpr->y.pTab; + assert( pTab!=0 ); if( iCol<0 ) iCol = pTab->iPKey; zName = iCol>=0 ? pTab->aCol[iCol].zName : "rowid"; }else if( pColExpr->op==TK_ID ){ @@ -119219,7 +125944,6 @@ int i; Expr *p; struct ExprList_item *a; - u64 szAll = 0; assert( pSelect!=0 ); assert( (pSelect->selFlags & SF_Resolved)!=0 ); @@ -119232,10 +125956,11 @@ const char *zType; int n, m; p = a[i].pExpr; - zType = columnType(&sNC, p, 0, 0, 0, &pCol->szEst); - szAll += pCol->szEst; + zType = columnType(&sNC, p, 0, 0, 0); + /* pCol->szEst = ... // Column size est for SELECT tables never used */ pCol->affinity = sqlite3ExprAffinity(p); - if( zType && (m = sqlite3Strlen30(zType))>0 ){ + if( zType ){ + m = sqlite3Strlen30(zType); n = sqlite3Strlen30(pCol->zName); pCol->zName = sqlite3DbReallocOrFree(db, pCol->zName, n+m+2); if( pCol->zName ){ @@ -119249,7 +125974,7 @@ pCol->zColl = sqlite3DbStrDup(db, pColl->zName); } } - pTab->szTabRow = sqlite3LogEst(szAll*4); + pTab->szTabRow = 1; /* Any non-zero value works */ } /* @@ -119292,25 +126017,22 @@ ** Get a VDBE for the given parser context. Create a new one if necessary. ** If an error occurs, return NULL and leave a message in pParse. */ -static SQLITE_NOINLINE Vdbe *allocVdbe(Parse *pParse){ - Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(pParse); - if( v ) sqlite3VdbeAddOp2(v, OP_Init, 0, 1); +SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){ + if( pParse->pVdbe ){ + return pParse->pVdbe; + } if( pParse->pToplevel==0 && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst) ){ pParse->okConstFactor = 1; } - return v; + return sqlite3VdbeCreate(pParse); } -SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){ - Vdbe *v = pParse->pVdbe; - return v ? v : allocVdbe(pParse); -} /* ** Compute the iLimit and iOffset fields of the SELECT based on the -** pLimit and pOffset expressions. pLimit and pOffset hold the expressions +** pLimit expressions. pLimit->pLeft and pLimit->pRight hold the expressions ** that appear in the original SQL statement after the LIMIT and OFFSET ** keywords. Or NULL if those keywords are omitted. iLimit and iOffset ** are the integer memory register numbers for counters used to compute @@ -119318,8 +126040,8 @@ ** iLimit and iOffset are negative. ** ** This routine changes the values of iLimit and iOffset only if -** a limit or offset is defined by pLimit and pOffset. iLimit and -** iOffset should have been preset to appropriate default values (zero) +** a limit or offset is defined by pLimit->pLeft and pLimit->pRight. iLimit +** and iOffset should have been preset to appropriate default values (zero) ** prior to calling this routine. ** ** The iOffset register (if it exists) is initialized to the value @@ -119326,7 +126048,7 @@ ** of the OFFSET. The iLimit register is initialized to LIMIT. Register ** iOffset+1 is initialized to LIMIT+OFFSET. ** -** Only if pLimit!=0 or pOffset!=0 do the limit registers get +** Only if pLimit->pLeft!=0 do the limit registers get ** redefined. The UNION ALL operator uses this property to force ** the reuse of the same limit and offset registers across multiple ** SELECT statements. @@ -119336,6 +126058,8 @@ int iLimit = 0; int iOffset; int n; + Expr *pLimit = p->pLimit; + if( p->iLimit ) return; /* @@ -119344,13 +126068,13 @@ ** The current implementation interprets "LIMIT 0" to mean ** no rows. */ - sqlite3ExprCacheClear(pParse); - assert( p->pOffset==0 || p->pLimit!=0 ); - if( p->pLimit ){ + if( pLimit ){ + assert( pLimit->op==TK_LIMIT ); + assert( pLimit->pLeft!=0 ); p->iLimit = iLimit = ++pParse->nMem; v = sqlite3GetVdbe(pParse); assert( v!=0 ); - if( sqlite3ExprIsInteger(p->pLimit, &n) ){ + if( sqlite3ExprIsInteger(pLimit->pLeft, &n) ){ sqlite3VdbeAddOp2(v, OP_Integer, n, iLimit); VdbeComment((v, "LIMIT counter")); if( n==0 ){ @@ -119360,15 +126084,15 @@ p->selFlags |= SF_FixedLimit; } }else{ - sqlite3ExprCode(pParse, p->pLimit, iLimit); + sqlite3ExprCode(pParse, pLimit->pLeft, iLimit); sqlite3VdbeAddOp1(v, OP_MustBeInt, iLimit); VdbeCoverage(v); VdbeComment((v, "LIMIT counter")); sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, iBreak); VdbeCoverage(v); } - if( p->pOffset ){ + if( pLimit->pRight ){ p->iOffset = iOffset = ++pParse->nMem; pParse->nMem++; /* Allocate an extra register for limit+offset */ - sqlite3ExprCode(pParse, p->pOffset, iOffset); + sqlite3ExprCode(pParse, pLimit->pRight, iOffset); sqlite3VdbeAddOp1(v, OP_MustBeInt, iOffset); VdbeCoverage(v); VdbeComment((v, "OFFSET counter")); sqlite3VdbeAddOp3(v, OP_OffsetLimit, iLimit, iOffset+1, iOffset); @@ -119498,9 +126222,16 @@ int i; /* Loop counter */ int rc; /* Result code */ ExprList *pOrderBy; /* The ORDER BY clause */ - Expr *pLimit, *pOffset; /* Saved LIMIT and OFFSET */ + Expr *pLimit; /* Saved LIMIT and OFFSET */ int regLimit, regOffset; /* Registers used by LIMIT and OFFSET */ +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWin ){ + sqlite3ErrorMsg(pParse, "cannot use window functions in recursive queries"); + return; + } +#endif + /* Obtain authorization to do a recursive query */ if( sqlite3AuthCheck(pParse, SQLITE_RECURSIVE, 0, 0, 0) ) return; @@ -119509,10 +126240,9 @@ p->nSelectRow = 320; /* 4 billion rows */ computeLimitRegisters(pParse, p, addrBreak); pLimit = p->pLimit; - pOffset = p->pOffset; regLimit = p->iLimit; regOffset = p->iOffset; - p->pLimit = p->pOffset = 0; + p->pLimit = 0; p->iLimit = p->iOffset = 0; pOrderBy = p->pOrderBy; @@ -119558,6 +126288,7 @@ /* Store the results of the setup-query in Queue. */ pSetup->pNext = 0; + ExplainQueryPlan((pParse, 1, "SETUP")); rc = sqlite3Select(pParse, pSetup, &destQueue); pSetup->pNext = p; if( rc ) goto end_of_recursive_query; @@ -119577,7 +126308,7 @@ /* Output the single row in Current */ addrCont = sqlite3VdbeMakeLabel(v); codeOffset(v, regOffset, addrCont); - selectInnerLoop(pParse, p, p->pEList, iCurrent, + selectInnerLoop(pParse, p, iCurrent, 0, 0, pDest, addrCont, addrBreak); if( regLimit ){ sqlite3VdbeAddOp2(v, OP_DecrJumpZero, regLimit, addrBreak); @@ -119592,6 +126323,7 @@ sqlite3ErrorMsg(pParse, "recursive aggregate queries not supported"); }else{ p->pPrior = 0; + ExplainQueryPlan((pParse, 1, "RECURSIVE STEP")); sqlite3Select(pParse, p, &destQueue); assert( p->pPrior==0 ); p->pPrior = pSetup; @@ -119605,7 +126337,6 @@ sqlite3ExprListDelete(pParse->db, p->pOrderBy); p->pOrderBy = pOrderBy; p->pLimit = pLimit; - p->pOffset = pOffset; return; } #endif /* SQLITE_OMIT_CTE */ @@ -119624,9 +126355,14 @@ ** on a VALUES clause. ** ** Because the Select object originates from a VALUES clause: -** (1) It has no LIMIT or OFFSET +** (1) There is no LIMIT or OFFSET or else there is a LIMIT of exactly 1 ** (2) All terms are UNION ALL ** (3) There is no ORDER BY clause +** +** The "LIMIT of exactly 1" case of condition (1) comes about when a VALUES +** clause occurs within scalar expression (ex: "SELECT (VALUES(1),(2),(3))"). +** The sqlite3CodeSubselect will have added the LIMIT 1 clause in tht case. +** Since the limit is exactly 1, we only need to evalutes the left-most VALUES. */ static int multiSelectValues( Parse *pParse, /* Parsing context */ @@ -119633,27 +126369,24 @@ Select *p, /* The right-most of SELECTs to be coded */ SelectDest *pDest /* What to do with query results */ ){ - Select *pPrior; int nRow = 1; int rc = 0; + int bShowAll = p->pLimit==0; assert( p->selFlags & SF_MultiValue ); do{ assert( p->selFlags & SF_Values ); assert( p->op==TK_ALL || (p->op==TK_SELECT && p->pPrior==0) ); - assert( p->pLimit==0 ); - assert( p->pOffset==0 ); assert( p->pNext==0 || p->pEList->nExpr==p->pNext->pEList->nExpr ); if( p->pPrior==0 ) break; assert( p->pPrior->pNext==p ); p = p->pPrior; - nRow++; + nRow += bShowAll; }while(1); + ExplainQueryPlan((pParse, 0, "SCAN %d CONSTANT ROW%s", nRow, + nRow==1 ? "" : "S")); while( p ){ - pPrior = p->pPrior; - p->pPrior = 0; - rc = sqlite3Select(pParse, p, pDest); - p->pPrior = pPrior; - if( rc ) break; + selectInnerLoop(pParse, p, -1, 0, 0, pDest, 1, 1); + if( !bShowAll ) break; p->nSelectRow = nRow; p = p->pNext; } @@ -119702,10 +126435,6 @@ SelectDest dest; /* Alternative data destination */ Select *pDelete = 0; /* Chain of simple selects to delete */ sqlite3 *db; /* Database connection */ -#ifndef SQLITE_OMIT_EXPLAIN - int iSub1 = 0; /* EQP id of left-hand query */ - int iSub2 = 0; /* EQP id of right-hand query */ -#endif /* Make sure there is no ORDER BY or LIMIT clause on prior SELECTs. Only ** the last (right-most) SELECT in the series may have an ORDER BY or LIMIT. @@ -119715,18 +126444,12 @@ db = pParse->db; pPrior = p->pPrior; dest = *pDest; - if( pPrior->pOrderBy ){ - sqlite3ErrorMsg(pParse,"ORDER BY clause should come after %s not before", - selectOpName(p->op)); + if( pPrior->pOrderBy || pPrior->pLimit ){ + sqlite3ErrorMsg(pParse,"%s clause should come after %s not before", + pPrior->pOrderBy!=0 ? "ORDER BY" : "LIMIT", selectOpName(p->op)); rc = 1; goto multi_select_end; } - if( pPrior->pLimit ){ - sqlite3ErrorMsg(pParse,"LIMIT clause should come after %s not before", - selectOpName(p->op)); - rc = 1; - goto multi_select_end; - } v = sqlite3GetVdbe(pParse); assert( v!=0 ); /* The VDBE already created by calling function */ @@ -119762,226 +126485,231 @@ */ if( p->pOrderBy ){ return multiSelectOrderBy(pParse, p, pDest); - }else + }else{ - /* Generate code for the left and right SELECT statements. - */ - switch( p->op ){ - case TK_ALL: { - int addr = 0; - int nLimit; - assert( !pPrior->pLimit ); - pPrior->iLimit = p->iLimit; - pPrior->iOffset = p->iOffset; - pPrior->pLimit = p->pLimit; - pPrior->pOffset = p->pOffset; - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &dest); - p->pLimit = 0; - p->pOffset = 0; - if( rc ){ - goto multi_select_end; +#ifndef SQLITE_OMIT_EXPLAIN + if( pPrior->pPrior==0 ){ + ExplainQueryPlan((pParse, 1, "COMPOUND QUERY")); + ExplainQueryPlan((pParse, 1, "LEFT-MOST SUBQUERY")); + } +#endif + + /* Generate code for the left and right SELECT statements. + */ + switch( p->op ){ + case TK_ALL: { + int addr = 0; + int nLimit; + assert( !pPrior->pLimit ); + pPrior->iLimit = p->iLimit; + pPrior->iOffset = p->iOffset; + pPrior->pLimit = p->pLimit; + rc = sqlite3Select(pParse, pPrior, &dest); + p->pLimit = 0; + if( rc ){ + goto multi_select_end; + } + p->pPrior = 0; + p->iLimit = pPrior->iLimit; + p->iOffset = pPrior->iOffset; + if( p->iLimit ){ + addr = sqlite3VdbeAddOp1(v, OP_IfNot, p->iLimit); VdbeCoverage(v); + VdbeComment((v, "Jump ahead if LIMIT reached")); + if( p->iOffset ){ + sqlite3VdbeAddOp3(v, OP_OffsetLimit, + p->iLimit, p->iOffset+1, p->iOffset); + } + } + ExplainQueryPlan((pParse, 1, "UNION ALL")); + rc = sqlite3Select(pParse, p, &dest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); + if( pPrior->pLimit + && sqlite3ExprIsInteger(pPrior->pLimit->pLeft, &nLimit) + && nLimit>0 && p->nSelectRow > sqlite3LogEst((u64)nLimit) + ){ + p->nSelectRow = sqlite3LogEst((u64)nLimit); + } + if( addr ){ + sqlite3VdbeJumpHere(v, addr); + } + break; } - p->pPrior = 0; - p->iLimit = pPrior->iLimit; - p->iOffset = pPrior->iOffset; - if( p->iLimit ){ - addr = sqlite3VdbeAddOp1(v, OP_IfNot, p->iLimit); VdbeCoverage(v); - VdbeComment((v, "Jump ahead if LIMIT reached")); - if( p->iOffset ){ - sqlite3VdbeAddOp3(v, OP_OffsetLimit, - p->iLimit, p->iOffset+1, p->iOffset); + case TK_EXCEPT: + case TK_UNION: { + int unionTab; /* Cursor number of the temp table holding result */ + u8 op = 0; /* One of the SRT_ operations to apply to self */ + int priorOp; /* The SRT_ operation to apply to prior selects */ + Expr *pLimit; /* Saved values of p->nLimit */ + int addr; + SelectDest uniondest; + + testcase( p->op==TK_EXCEPT ); + testcase( p->op==TK_UNION ); + priorOp = SRT_Union; + if( dest.eDest==priorOp ){ + /* We can reuse a temporary table generated by a SELECT to our + ** right. + */ + assert( p->pLimit==0 ); /* Not allowed on leftward elements */ + unionTab = dest.iSDParm; + }else{ + /* We will need to create our own temporary table to hold the + ** intermediate results. + */ + unionTab = pParse->nTab++; + assert( p->pOrderBy==0 ); + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0); + assert( p->addrOpenEphm[0] == -1 ); + p->addrOpenEphm[0] = addr; + findRightmost(p)->selFlags |= SF_UsesEphemeral; + assert( p->pEList ); } + + /* Code the SELECT statements to our left + */ + assert( !pPrior->pOrderBy ); + sqlite3SelectDestInit(&uniondest, priorOp, unionTab); + rc = sqlite3Select(pParse, pPrior, &uniondest); + if( rc ){ + goto multi_select_end; + } + + /* Code the current SELECT statement + */ + if( p->op==TK_EXCEPT ){ + op = SRT_Except; + }else{ + assert( p->op==TK_UNION ); + op = SRT_Union; + } + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + uniondest.eDest = op; + ExplainQueryPlan((pParse, 1, "%s USING TEMP B-TREE", + selectOpName(p->op))); + rc = sqlite3Select(pParse, p, &uniondest); + testcase( rc!=SQLITE_OK ); + /* Query flattening in sqlite3Select() might refill p->pOrderBy. + ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ + sqlite3ExprListDelete(db, p->pOrderBy); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->pOrderBy = 0; + if( p->op==TK_UNION ){ + p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); + } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + p->iLimit = 0; + p->iOffset = 0; + + /* Convert the data in the temporary table into whatever form + ** it is that we currently need. + */ + assert( unionTab==dest.iSDParm || dest.eDest!=priorOp ); + if( dest.eDest!=priorOp ){ + int iCont, iBreak, iStart; + assert( p->pEList ); + iBreak = sqlite3VdbeMakeLabel(v); + iCont = sqlite3VdbeMakeLabel(v); + computeLimitRegisters(pParse, p, iBreak); + sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v); + iStart = sqlite3VdbeCurrentAddr(v); + selectInnerLoop(pParse, p, unionTab, + 0, 0, &dest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v); + sqlite3VdbeResolveLabel(v, iBreak); + sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0); + } + break; } - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &dest); - testcase( rc!=SQLITE_OK ); - pDelete = p->pPrior; - p->pPrior = pPrior; - p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); - if( pPrior->pLimit - && sqlite3ExprIsInteger(pPrior->pLimit, &nLimit) - && nLimit>0 && p->nSelectRow > sqlite3LogEst((u64)nLimit) - ){ - p->nSelectRow = sqlite3LogEst((u64)nLimit); - } - if( addr ){ - sqlite3VdbeJumpHere(v, addr); - } - break; - } - case TK_EXCEPT: - case TK_UNION: { - int unionTab; /* Cursor number of the temporary table holding result */ - u8 op = 0; /* One of the SRT_ operations to apply to self */ - int priorOp; /* The SRT_ operation to apply to prior selects */ - Expr *pLimit, *pOffset; /* Saved values of p->nLimit and p->nOffset */ - int addr; - SelectDest uniondest; - - testcase( p->op==TK_EXCEPT ); - testcase( p->op==TK_UNION ); - priorOp = SRT_Union; - if( dest.eDest==priorOp ){ - /* We can reuse a temporary table generated by a SELECT to our - ** right. + default: assert( p->op==TK_INTERSECT ); { + int tab1, tab2; + int iCont, iBreak, iStart; + Expr *pLimit; + int addr; + SelectDest intersectdest; + int r1; + + /* INTERSECT is different from the others since it requires + ** two temporary tables. Hence it has its own case. Begin + ** by allocating the tables we will need. */ - assert( p->pLimit==0 ); /* Not allowed on leftward elements */ - assert( p->pOffset==0 ); /* Not allowed on leftward elements */ - unionTab = dest.iSDParm; - }else{ - /* We will need to create our own temporary table to hold the - ** intermediate results. - */ - unionTab = pParse->nTab++; + tab1 = pParse->nTab++; + tab2 = pParse->nTab++; assert( p->pOrderBy==0 ); - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0); + + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0); assert( p->addrOpenEphm[0] == -1 ); p->addrOpenEphm[0] = addr; findRightmost(p)->selFlags |= SF_UsesEphemeral; assert( p->pEList ); - } - - /* Code the SELECT statements to our left - */ - assert( !pPrior->pOrderBy ); - sqlite3SelectDestInit(&uniondest, priorOp, unionTab); - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &uniondest); - if( rc ){ - goto multi_select_end; - } - - /* Code the current SELECT statement - */ - if( p->op==TK_EXCEPT ){ - op = SRT_Except; - }else{ - assert( p->op==TK_UNION ); - op = SRT_Union; - } - p->pPrior = 0; - pLimit = p->pLimit; - p->pLimit = 0; - pOffset = p->pOffset; - p->pOffset = 0; - uniondest.eDest = op; - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &uniondest); - testcase( rc!=SQLITE_OK ); - /* Query flattening in sqlite3Select() might refill p->pOrderBy. - ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ - sqlite3ExprListDelete(db, p->pOrderBy); - pDelete = p->pPrior; - p->pPrior = pPrior; - p->pOrderBy = 0; - if( p->op==TK_UNION ){ - p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); - } - sqlite3ExprDelete(db, p->pLimit); - p->pLimit = pLimit; - p->pOffset = pOffset; - p->iLimit = 0; - p->iOffset = 0; - - /* Convert the data in the temporary table into whatever form - ** it is that we currently need. - */ - assert( unionTab==dest.iSDParm || dest.eDest!=priorOp ); - if( dest.eDest!=priorOp ){ - int iCont, iBreak, iStart; + + /* Code the SELECTs to our left into temporary table "tab1". + */ + sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1); + rc = sqlite3Select(pParse, pPrior, &intersectdest); + if( rc ){ + goto multi_select_end; + } + + /* Code the current SELECT into temporary table "tab2" + */ + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0); + assert( p->addrOpenEphm[1] == -1 ); + p->addrOpenEphm[1] = addr; + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + intersectdest.iSDParm = tab2; + ExplainQueryPlan((pParse, 1, "%s USING TEMP B-TREE", + selectOpName(p->op))); + rc = sqlite3Select(pParse, p, &intersectdest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + if( p->nSelectRow>pPrior->nSelectRow ){ + p->nSelectRow = pPrior->nSelectRow; + } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + + /* Generate code to take the intersection of the two temporary + ** tables. + */ assert( p->pEList ); iBreak = sqlite3VdbeMakeLabel(v); iCont = sqlite3VdbeMakeLabel(v); computeLimitRegisters(pParse, p, iBreak); - sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v); - iStart = sqlite3VdbeCurrentAddr(v); - selectInnerLoop(pParse, p, p->pEList, unionTab, + sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v); + r1 = sqlite3GetTempReg(pParse); + iStart = sqlite3VdbeAddOp2(v, OP_RowData, tab1, r1); + sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); + VdbeCoverage(v); + sqlite3ReleaseTempReg(pParse, r1); + selectInnerLoop(pParse, p, tab1, 0, 0, &dest, iCont, iBreak); sqlite3VdbeResolveLabel(v, iCont); - sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v); sqlite3VdbeResolveLabel(v, iBreak); - sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0); + sqlite3VdbeAddOp2(v, OP_Close, tab2, 0); + sqlite3VdbeAddOp2(v, OP_Close, tab1, 0); + break; } - break; } - default: assert( p->op==TK_INTERSECT ); { - int tab1, tab2; - int iCont, iBreak, iStart; - Expr *pLimit, *pOffset; - int addr; - SelectDest intersectdest; - int r1; - - /* INTERSECT is different from the others since it requires - ** two temporary tables. Hence it has its own case. Begin - ** by allocating the tables we will need. - */ - tab1 = pParse->nTab++; - tab2 = pParse->nTab++; - assert( p->pOrderBy==0 ); - - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0); - assert( p->addrOpenEphm[0] == -1 ); - p->addrOpenEphm[0] = addr; - findRightmost(p)->selFlags |= SF_UsesEphemeral; - assert( p->pEList ); - - /* Code the SELECTs to our left into temporary table "tab1". - */ - sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1); - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &intersectdest); - if( rc ){ - goto multi_select_end; - } - - /* Code the current SELECT into temporary table "tab2" - */ - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0); - assert( p->addrOpenEphm[1] == -1 ); - p->addrOpenEphm[1] = addr; - p->pPrior = 0; - pLimit = p->pLimit; - p->pLimit = 0; - pOffset = p->pOffset; - p->pOffset = 0; - intersectdest.iSDParm = tab2; - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &intersectdest); - testcase( rc!=SQLITE_OK ); - pDelete = p->pPrior; - p->pPrior = pPrior; - if( p->nSelectRow>pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow; - sqlite3ExprDelete(db, p->pLimit); - p->pLimit = pLimit; - p->pOffset = pOffset; - - /* Generate code to take the intersection of the two temporary - ** tables. - */ - assert( p->pEList ); - iBreak = sqlite3VdbeMakeLabel(v); - iCont = sqlite3VdbeMakeLabel(v); - computeLimitRegisters(pParse, p, iBreak); - sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v); - r1 = sqlite3GetTempReg(pParse); - iStart = sqlite3VdbeAddOp2(v, OP_RowData, tab1, r1); - sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); VdbeCoverage(v); - sqlite3ReleaseTempReg(pParse, r1); - selectInnerLoop(pParse, p, p->pEList, tab1, - 0, 0, &dest, iCont, iBreak); - sqlite3VdbeResolveLabel(v, iCont); - sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v); - sqlite3VdbeResolveLabel(v, iBreak); - sqlite3VdbeAddOp2(v, OP_Close, tab2, 0); - sqlite3VdbeAddOp2(v, OP_Close, tab1, 0); - break; + + #ifndef SQLITE_OMIT_EXPLAIN + if( p->pNext==0 ){ + ExplainQueryPlanPop(pParse); } + #endif } - - explainComposite(pParse, p->op, iSub1, iSub2, p->op!=TK_ALL); - + /* Compute collating sequences used by ** temporary tables needed to implement the compound select. ** Attach the KeyInfo structure to all temporary tables. @@ -120132,7 +126860,6 @@ r1 = sqlite3GetTempReg(pParse); sqlite3VdbeAddOp4(v, OP_MakeRecord, pIn->iSdst, pIn->nSdst, r1, pDest->zAffSdst, pIn->nSdst); - sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst); sqlite3VdbeAddOp4Int(v, OP_IdxInsert, pDest->iSDParm, r1, pIn->iSdst, pIn->nSdst); sqlite3ReleaseTempReg(pParse, r1); @@ -120175,7 +126902,6 @@ default: { assert( pDest->eDest==SRT_Output ); sqlite3VdbeAddOp2(v, OP_ResultRow, pIn->iSdst, pIn->nSdst); - sqlite3ExprCacheAffinityChange(pParse, pIn->iSdst, pIn->nSdst); break; } } @@ -120319,10 +127045,6 @@ ExprList *pOrderBy; /* The ORDER BY clause */ int nOrderBy; /* Number of terms in the ORDER BY clause */ int *aPermute; /* Mapping from ORDER BY terms to result set columns */ -#ifndef SQLITE_OMIT_EXPLAIN - int iSub1; /* EQP id of left-hand query */ - int iSub2; /* EQP id of right-hand query */ -#endif assert( p->pOrderBy!=0 ); assert( pKeyDup==0 ); /* "Managed" code needs this. Ticket #3382. */ @@ -120434,8 +127156,6 @@ } sqlite3ExprDelete(db, p->pLimit); p->pLimit = 0; - sqlite3ExprDelete(db, p->pOffset); - p->pOffset = 0; regAddrA = ++pParse->nMem; regAddrB = ++pParse->nMem; @@ -120444,6 +127164,8 @@ sqlite3SelectDestInit(&destA, SRT_Coroutine, regAddrA); sqlite3SelectDestInit(&destB, SRT_Coroutine, regAddrB); + ExplainQueryPlan((pParse, 1, "MERGE (%s)", selectOpName(p->op))); + /* Generate a coroutine to evaluate the SELECT statement to the ** left of the compound operator - the "A" select. */ @@ -120451,7 +127173,7 @@ addr1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrA, 0, addrSelectA); VdbeComment((v, "left SELECT")); pPrior->iLimit = regLimitA; - explainSetInteger(iSub1, pParse->iNextSelectId); + ExplainQueryPlan((pParse, 1, "LEFT")); sqlite3Select(pParse, pPrior, &destA); sqlite3VdbeEndCoroutine(v, regAddrA); sqlite3VdbeJumpHere(v, addr1); @@ -120466,7 +127188,7 @@ savedOffset = p->iOffset; p->iLimit = regLimitB; p->iOffset = 0; - explainSetInteger(iSub2, pParse->iNextSelectId); + ExplainQueryPlan((pParse, 1, "RIGHT")); sqlite3Select(pParse, p, &destB); p->iLimit = savedLimit; p->iOffset = savedOffset; @@ -120578,7 +127300,7 @@ /*** TBD: Insert subroutine calls to close cursors on incomplete **** subqueries ****/ - explainComposite(pParse, p->op, iSub1, iSub2, 0); + ExplainQueryPlanPop(pParse); return pParse->nErr!=0; } #endif @@ -120621,7 +127343,9 @@ Expr *pExpr /* Expr in which substitution occurs */ ){ if( pExpr==0 ) return 0; - if( ExprHasProperty(pExpr, EP_FromJoin) && pExpr->iRightJoinTable==pSubst->iTable ){ + if( ExprHasProperty(pExpr, EP_FromJoin) + && pExpr->iRightJoinTable==pSubst->iTable + ){ pExpr->iRightJoinTable = pSubst->iNewTable; } if( pExpr->op==TK_COLUMN && pExpr->iTable==pSubst->iTable ){ @@ -120632,7 +127356,7 @@ Expr *pCopy = pSubst->pEList->a[pExpr->iColumn].pExpr; Expr ifNullRow; assert( pSubst->pEList!=0 && pExpr->iColumnpEList->nExpr ); - assert( pExpr->pLeft==0 && pExpr->pRight==0 ); + assert( pExpr->pRight==0 ); if( sqlite3ExprIsVector(pCopy) ){ sqlite3VectorErrorMsg(pSubst->pParse, pCopy); }else{ @@ -120734,69 +127458,75 @@ ** exist on the table t1, a complete scan of the data might be ** avoided. ** -** Flattening is only attempted if all of the following are true: +** Flattening is subject to the following constraints: ** -** (1) The subquery and the outer query do not both use aggregates. +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** The subquery and the outer query cannot both be aggregates. ** -** (2) The subquery is not an aggregate or (2a) the outer query is not a join -** and (2b) the outer query does not use subqueries other than the one -** FROM-clause subquery that is a candidate for flattening. (2b is -** due to ticket [2f7170d73bf9abf80] from 2015-02-09.) +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** (2) If the subquery is an aggregate then +** (2a) the outer query must not be a join and +** (2b) the outer query must not use subqueries +** other than the one FROM-clause subquery that is a candidate +** for flattening. (This is due to ticket [2f7170d73bf9abf80] +** from 2015-02-09.) ** -** (3) The subquery is not the right operand of a LEFT JOIN -** or (a) the subquery is not itself a join and (b) the FROM clause -** of the subquery does not contain a virtual table and (c) the -** outer query is not an aggregate. +** (3) If the subquery is the right operand of a LEFT JOIN then +** (3a) the subquery may not be a join and +** (3b) the FROM clause of the subquery may not contain a virtual +** table and +** (3c) the outer query may not be an aggregate. ** -** (4) The subquery is not DISTINCT. +** (4) The subquery can not be DISTINCT. ** ** (**) At one point restrictions (4) and (5) defined a subset of DISTINCT ** sub-queries that were excluded from this optimization. Restriction ** (4) has since been expanded to exclude all DISTINCT subqueries. ** -** (6) The subquery does not use aggregates or the outer query is not -** DISTINCT. +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** If the subquery is aggregate, the outer query may not be DISTINCT. ** -** (7) The subquery has a FROM clause. TODO: For subqueries without +** (7) The subquery must have a FROM clause. TODO: For subqueries without ** A FROM clause, consider adding a FROM clause with the special ** table sqlite_once that consists of a single row containing a ** single NULL. ** -** (8) The subquery does not use LIMIT or the outer query is not a join. +** (8) If the subquery uses LIMIT then the outer query may not be a join. ** -** (9) The subquery does not use LIMIT or the outer query does not use -** aggregates. +** (9) If the subquery uses LIMIT then the outer query may not be aggregate. ** ** (**) Restriction (10) was removed from the code on 2005-02-05 but we ** accidently carried the comment forward until 2014-09-15. Original -** text: "The subquery does not use aggregates or the outer query -** does not use LIMIT." +** constraint: "If the subquery is aggregate then the outer query +** may not use LIMIT." ** -** (11) The subquery and the outer query do not both have ORDER BY clauses. +** (11) The subquery and the outer query may not both have ORDER BY clauses. ** ** (**) Not implemented. Subsumed into restriction (3). Was previously ** a separate restriction deriving from ticket #350. ** -** (13) The subquery and outer query do not both use LIMIT. +** (13) The subquery and outer query may not both use LIMIT. ** -** (14) The subquery does not use OFFSET. +** (14) The subquery may not use OFFSET. ** -** (15) The outer query is not part of a compound select or the -** subquery does not have a LIMIT clause. +** (15) If the outer query is part of a compound select, then the +** subquery may not use LIMIT. ** (See ticket #2339 and ticket [02a8e81d44]). ** -** (16) The outer query is not an aggregate or the subquery does -** not contain ORDER BY. (Ticket #2942) This used to not matter +** (16) If the outer query is aggregate, then the subquery may not +** use ORDER BY. (Ticket #2942) This used to not matter ** until we introduced the group_concat() function. ** -** (17) The sub-query is not a compound select, or it is a UNION ALL -** compound clause made up entirely of non-aggregate queries, and -** the parent query: +** (17) If the subquery is a compound select, then +** (17a) all compound operators must be a UNION ALL, and +** (17b) no terms within the subquery compound may be aggregate +** or DISTINCT, and +** (17c) every term within the subquery compound must have a FROM clause +** (17d) the outer query may not be +** (17d1) aggregate, or +** (17d2) DISTINCT, or +** (17d3) a join. ** -** * is not itself part of a compound select, -** * is not an aggregate or DISTINCT query, and -** * is not a join -** ** The parent and sub-query may contain WHERE clauses. Subject to ** rules (11), (13) and (14), they may also contain ORDER BY, ** LIMIT and OFFSET clauses. The subquery cannot use any compound @@ -120811,10 +127541,10 @@ ** syntax error and return a detailed message. ** ** (18) If the sub-query is a compound select, then all terms of the -** ORDER by clause of the parent must be simple references to +** ORDER BY clause of the parent must be simple references to ** columns of the sub-query. ** -** (19) The subquery does not use LIMIT or the outer query does not +** (19) If the subquery uses LIMIT then the outer query may not ** have a WHERE clause. ** ** (20) If the sub-query is a compound select, then it must not use @@ -120823,25 +127553,31 @@ ** appear as unmodified result columns in the outer query. But we ** have other optimizations in mind to deal with that case. ** -** (21) The subquery does not use LIMIT or the outer query is not +** (21) If the subquery uses LIMIT then the outer query may not be ** DISTINCT. (See ticket [752e1646fc]). ** -** (22) The subquery is not a recursive CTE. +** (22) The subquery may not be a recursive CTE. ** -** (23) The parent is not a recursive CTE, or the sub-query is not a -** compound query. This restriction is because transforming the +** (**) Subsumed into restriction (17d3). Was: If the outer query is +** a recursive CTE, then the sub-query may not be a compound query. +** This restriction is because transforming the ** parent to a compound query confuses the code that handles ** recursive queries in multiSelect(). ** -** (24) The subquery is not an aggregate that uses the built-in min() or +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** The subquery may not be an aggregate that uses the built-in min() or ** or max() functions. (Without this restriction, a query like: ** "SELECT x FROM (SELECT max(y), x FROM t1)" would not necessarily ** return the value X for which Y was maximal.) ** +** (25) If either the subquery or the parent query contains a window +** function in the select list or ORDER BY clause, flattening +** is not attempted. ** +** ** In this routine, the "p" parameter is a pointer to the outer query. ** The subquery is p->pSrc->a[iFrom]. isAgg is true if the outer query -** uses aggregates and subqueryIsAgg is true if the subquery uses aggregates. +** uses aggregates. ** ** If flattening is not attempted, this routine is a no-op and returns 0. ** If flattening is attempted this routine returns 1. @@ -120853,8 +127589,7 @@ Parse *pParse, /* Parsing context */ Select *p, /* The parent or outer SELECT statement */ int iFrom, /* Index in p->pSrc->a[] of the inner subquery */ - int isAgg, /* True if outer SELECT uses aggregate functions */ - int subqueryIsAgg /* True if the subquery uses aggregate functions */ + int isAgg /* True if outer SELECT uses aggregate functions */ ){ const char *zSavedAuthContext = pParse->zAuthContext; Select *pParent; /* Current UNION ALL term of the other query */ @@ -120873,7 +127608,7 @@ /* Check to see if flattening is permitted. Return 0 if not. */ assert( p!=0 ); - assert( p->pPrior==0 ); /* Unable to flatten compound queries */ + assert( p->pPrior==0 ); if( OptimizationDisabled(db, SQLITE_QueryFlattener) ) return 0; pSrc = p->pSrc; assert( pSrc && iFrom>=0 && iFromnSrc ); @@ -120881,17 +127616,11 @@ iParent = pSubitem->iCursor; pSub = pSubitem->pSelect; assert( pSub!=0 ); - if( subqueryIsAgg ){ - if( isAgg ) return 0; /* Restriction (1) */ - if( pSrc->nSrc>1 ) return 0; /* Restriction (2a) */ - if( (p->pWhere && ExprHasProperty(p->pWhere,EP_Subquery)) - || (sqlite3ExprListFlags(p->pEList) & EP_Subquery)!=0 - || (sqlite3ExprListFlags(p->pOrderBy) & EP_Subquery)!=0 - ){ - return 0; /* Restriction (2b) */ - } - } +#ifndef SQLITE_OMIT_WINDOWFUNC + if( p->pWin || pSub->pWin ) return 0; /* Restriction (25) */ +#endif + pSubSrc = pSub->pSrc; assert( pSubSrc ); /* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants, @@ -120900,18 +127629,15 @@ ** became arbitrary expressions, we were forced to add restrictions (13) ** and (14). */ if( pSub->pLimit && p->pLimit ) return 0; /* Restriction (13) */ - if( pSub->pOffset ) return 0; /* Restriction (14) */ + if( pSub->pLimit && pSub->pLimit->pRight ) return 0; /* Restriction (14) */ if( (p->selFlags & SF_Compound)!=0 && pSub->pLimit ){ return 0; /* Restriction (15) */ } if( pSubSrc->nSrc==0 ) return 0; /* Restriction (7) */ - if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (5) */ + if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (4) */ if( pSub->pLimit && (pSrc->nSrc>1 || isAgg) ){ return 0; /* Restrictions (8)(9) */ } - if( (p->selFlags & SF_Distinct)!=0 && subqueryIsAgg ){ - return 0; /* Restriction (6) */ - } if( p->pOrderBy && pSub->pOrderBy ){ return 0; /* Restriction (11) */ } @@ -120920,18 +127646,14 @@ if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){ return 0; /* Restriction (21) */ } - testcase( pSub->selFlags & SF_Recursive ); - testcase( pSub->selFlags & SF_MinMaxAgg ); - if( pSub->selFlags & (SF_Recursive|SF_MinMaxAgg) ){ - return 0; /* Restrictions (22) and (24) */ + if( pSub->selFlags & (SF_Recursive) ){ + return 0; /* Restrictions (22) */ } - if( (p->selFlags & SF_Recursive) && pSub->pPrior ){ - return 0; /* Restriction (23) */ - } /* ** If the subquery is the right operand of a LEFT JOIN, then the - ** subquery may not be a join itself. Example of why this is not allowed: + ** subquery may not be a join itself (3a). Example of why this is not + ** allowed: ** ** t1 LEFT OUTER JOIN (t2 JOIN t3) ** @@ -120942,9 +127664,9 @@ ** which is not at all the same thing. ** ** If the subquery is the right operand of a LEFT JOIN, then the outer - ** query cannot be an aggregate. This is an artifact of the way aggregates - ** are processed - there is no mechanism to determine if the LEFT JOIN - ** table should be all-NULL. + ** query cannot be an aggregate. (3c) This is an artifact of the way + ** aggregates are processed - there is no mechanism to determine if + ** the LEFT JOIN table should be all-NULL. ** ** See also tickets #306, #350, and #3300. */ @@ -120951,19 +127673,21 @@ if( (pSubitem->fg.jointype & JT_OUTER)!=0 ){ isLeftJoin = 1; if( pSubSrc->nSrc>1 || isAgg || IsVirtual(pSubSrc->a[0].pTab) ){ - return 0; /* Restriction (3) */ + /* (3a) (3c) (3b) */ + return 0; } } #ifdef SQLITE_EXTRA_IFNULLROW else if( iFrom>0 && !isAgg ){ /* Setting isLeftJoin to -1 causes OP_IfNullRow opcodes to be generated for - ** every reference to any result column from subquery in a join, even though - ** they are not necessary. This will stress-test the OP_IfNullRow opcode. */ + ** every reference to any result column from subquery in a join, even + ** though they are not necessary. This will stress-test the OP_IfNullRow + ** opcode. */ isLeftJoin = -1; } #endif - /* Restriction 17: If the sub-query is a compound SELECT, then it must + /* Restriction (17): If the sub-query is a compound SELECT, then it must ** use only the UNION ALL operator. And none of the simple select queries ** that make up the compound SELECT are allowed to be aggregate or distinct ** queries. @@ -120970,10 +127694,10 @@ */ if( pSub->pPrior ){ if( pSub->pOrderBy ){ - return 0; /* Restriction 20 */ + return 0; /* Restriction (20) */ } if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){ - return 0; + return 0; /* (17d1), (17d2), or (17d3) */ } for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){ testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct ); @@ -120980,9 +127704,9 @@ testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate ); assert( pSub->pSrc!=0 ); assert( pSub->pEList->nExpr==pSub1->pEList->nExpr ); - if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 - || (pSub1->pPrior && pSub1->op!=TK_ALL) - || pSub1->pSrc->nSrc<1 + if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 /* (17b) */ + || (pSub1->pPrior && pSub1->op!=TK_ALL) /* (17a) */ + || pSub1->pSrc->nSrc<1 /* (17c) */ ){ return 0; } @@ -120989,7 +127713,7 @@ testcase( pSub1->pSrc->nSrc>1 ); } - /* Restriction 18. */ + /* Restriction (18). */ if( p->pOrderBy ){ int ii; for(ii=0; iipOrderBy->nExpr; ii++){ @@ -120998,9 +127722,17 @@ } } + /* Ex-restriction (23): + ** The only way that the recursive part of a CTE can contain a compound + ** subquery is for the subquery to be one term of a join. But if the + ** subquery is a join, then the flattening has already been stopped by + ** restriction (17d3) + */ + assert( (p->selFlags & SF_Recursive)==0 || pSub->pPrior==0 ); + /***** If we reach this point, flattening is permitted. *****/ - SELECTTRACE(1,pParse,p,("flatten %s.%p from term %d\n", - pSub->zSelName, pSub, iFrom)); + SELECTTRACE(1,pParse,p,("flatten %u.%p from term %d\n", + pSub->selId, pSub, iFrom)); /* Authorize the subquery */ pParse->zAuthContext = pSubitem->zName; @@ -121045,16 +127777,12 @@ Select *pNew; ExprList *pOrderBy = p->pOrderBy; Expr *pLimit = p->pLimit; - Expr *pOffset = p->pOffset; Select *pPrior = p->pPrior; p->pOrderBy = 0; p->pSrc = 0; p->pPrior = 0; p->pLimit = 0; - p->pOffset = 0; pNew = sqlite3SelectDup(db, p, 0); - sqlite3SelectSetName(pNew, pSub->zSelName); - p->pOffset = pOffset; p->pLimit = pLimit; p->pOrderBy = pOrderBy; p->pSrc = pSrc; @@ -121066,9 +127794,8 @@ if( pPrior ) pPrior->pNext = pNew; pNew->pNext = p; p->pPrior = pNew; - SELECTTRACE(2,pParse,p, - ("compound-subquery flattener creates %s.%p as peer\n", - pNew->zSelName, pNew)); + SELECTTRACE(2,pParse,p,("compound-subquery flattener" + " creates %u as peer\n",pNew->selId)); } if( db->mallocFailed ) return 1; } @@ -121202,7 +127929,6 @@ pOrderBy->a[i].u.x.iOrderByCol = 0; } assert( pParent->pOrderBy==0 ); - assert( pSub->pPrior==0 ); pParent->pOrderBy = pOrderBy; pSub->pOrderBy = 0; } @@ -121210,18 +127936,7 @@ if( isLeftJoin>0 ){ setJoinExpr(pWhere, iNewParent); } - if( subqueryIsAgg ){ - assert( pParent->pHaving==0 ); - pParent->pHaving = pParent->pWhere; - pParent->pWhere = pWhere; - pParent->pHaving = sqlite3ExprAnd(db, - sqlite3ExprDup(db, pSub->pHaving, 0), pParent->pHaving - ); - assert( pParent->pGroupBy==0 ); - pParent->pGroupBy = sqlite3ExprListDup(db, pSub->pGroupBy, 0); - }else{ - pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere); - } + pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere); if( db->mallocFailed==0 ){ SubstContext x; x.pParse = pParse; @@ -121265,8 +127980,184 @@ } #endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ +/* +** A structure to keep track of all of the column values that are fixed to +** a known value due to WHERE clause constraints of the form COLUMN=VALUE. +*/ +typedef struct WhereConst WhereConst; +struct WhereConst { + Parse *pParse; /* Parsing context */ + int nConst; /* Number for COLUMN=CONSTANT terms */ + int nChng; /* Number of times a constant is propagated */ + Expr **apExpr; /* [i*2] is COLUMN and [i*2+1] is VALUE */ +}; +/* +** Add a new entry to the pConst object. Except, do not add duplicate +** pColumn entires. +*/ +static void constInsert( + WhereConst *pConst, /* The WhereConst into which we are inserting */ + Expr *pColumn, /* The COLUMN part of the constraint */ + Expr *pValue /* The VALUE part of the constraint */ +){ + int i; + assert( pColumn->op==TK_COLUMN ); + /* 2018-10-25 ticket [cf5ed20f] + ** Make sure the same pColumn is not inserted more than once */ + for(i=0; inConst; i++){ + const Expr *pExpr = pConst->apExpr[i*2]; + assert( pExpr->op==TK_COLUMN ); + if( pExpr->iTable==pColumn->iTable + && pExpr->iColumn==pColumn->iColumn + ){ + return; /* Already present. Return without doing anything. */ + } + } + + pConst->nConst++; + pConst->apExpr = sqlite3DbReallocOrFree(pConst->pParse->db, pConst->apExpr, + pConst->nConst*2*sizeof(Expr*)); + if( pConst->apExpr==0 ){ + pConst->nConst = 0; + }else{ + if( ExprHasProperty(pValue, EP_FixedCol) ) pValue = pValue->pLeft; + pConst->apExpr[pConst->nConst*2-2] = pColumn; + pConst->apExpr[pConst->nConst*2-1] = pValue; + } +} + +/* +** Find all terms of COLUMN=VALUE or VALUE=COLUMN in pExpr where VALUE +** is a constant expression and where the term must be true because it +** is part of the AND-connected terms of the expression. For each term +** found, add it to the pConst structure. +*/ +static void findConstInWhere(WhereConst *pConst, Expr *pExpr){ + Expr *pRight, *pLeft; + if( pExpr==0 ) return; + if( ExprHasProperty(pExpr, EP_FromJoin) ) return; + if( pExpr->op==TK_AND ){ + findConstInWhere(pConst, pExpr->pRight); + findConstInWhere(pConst, pExpr->pLeft); + return; + } + if( pExpr->op!=TK_EQ ) return; + pRight = pExpr->pRight; + pLeft = pExpr->pLeft; + assert( pRight!=0 ); + assert( pLeft!=0 ); + if( pRight->op==TK_COLUMN + && !ExprHasProperty(pRight, EP_FixedCol) + && sqlite3ExprIsConstant(pLeft) + && sqlite3IsBinary(sqlite3BinaryCompareCollSeq(pConst->pParse,pLeft,pRight)) + ){ + constInsert(pConst, pRight, pLeft); + }else + if( pLeft->op==TK_COLUMN + && !ExprHasProperty(pLeft, EP_FixedCol) + && sqlite3ExprIsConstant(pRight) + && sqlite3IsBinary(sqlite3BinaryCompareCollSeq(pConst->pParse,pLeft,pRight)) + ){ + constInsert(pConst, pLeft, pRight); + } +} + +/* +** This is a Walker expression callback. pExpr is a candidate expression +** to be replaced by a value. If pExpr is equivalent to one of the +** columns named in pWalker->u.pConst, then overwrite it with its +** corresponding value. +*/ +static int propagateConstantExprRewrite(Walker *pWalker, Expr *pExpr){ + int i; + WhereConst *pConst; + if( pExpr->op!=TK_COLUMN ) return WRC_Continue; + if( ExprHasProperty(pExpr, EP_FixedCol) ) return WRC_Continue; + pConst = pWalker->u.pConst; + for(i=0; inConst; i++){ + Expr *pColumn = pConst->apExpr[i*2]; + if( pColumn==pExpr ) continue; + if( pColumn->iTable!=pExpr->iTable ) continue; + if( pColumn->iColumn!=pExpr->iColumn ) continue; + /* A match is found. Add the EP_FixedCol property */ + pConst->nChng++; + ExprClearProperty(pExpr, EP_Leaf); + ExprSetProperty(pExpr, EP_FixedCol); + assert( pExpr->pLeft==0 ); + pExpr->pLeft = sqlite3ExprDup(pConst->pParse->db, pConst->apExpr[i*2+1], 0); + break; + } + return WRC_Prune; +} + +/* +** The WHERE-clause constant propagation optimization. +** +** If the WHERE clause contains terms of the form COLUMN=CONSTANT or +** CONSTANT=COLUMN that must be tree (in other words, if the terms top-level +** AND-connected terms that are not part of a ON clause from a LEFT JOIN) +** then throughout the query replace all other occurrences of COLUMN +** with CONSTANT within the WHERE clause. +** +** For example, the query: +** +** SELECT * FROM t1, t2, t3 WHERE t1.a=39 AND t2.b=t1.a AND t3.c=t2.b +** +** Is transformed into +** +** SELECT * FROM t1, t2, t3 WHERE t1.a=39 AND t2.b=39 AND t3.c=39 +** +** Return true if any transformations where made and false if not. +** +** Implementation note: Constant propagation is tricky due to affinity +** and collating sequence interactions. Consider this example: +** +** CREATE TABLE t1(a INT,b TEXT); +** INSERT INTO t1 VALUES(123,'0123'); +** SELECT * FROM t1 WHERE a=123 AND b=a; +** SELECT * FROM t1 WHERE a=123 AND b=123; +** +** The two SELECT statements above should return different answers. b=a +** is alway true because the comparison uses numeric affinity, but b=123 +** is false because it uses text affinity and '0123' is not the same as '123'. +** To work around this, the expression tree is not actually changed from +** "b=a" to "b=123" but rather the "a" in "b=a" is tagged with EP_FixedCol +** and the "123" value is hung off of the pLeft pointer. Code generator +** routines know to generate the constant "123" instead of looking up the +** column value. Also, to avoid collation problems, this optimization is +** only attempted if the "a=123" term uses the default BINARY collation. +*/ +static int propagateConstants( + Parse *pParse, /* The parsing context */ + Select *p /* The query in which to propagate constants */ +){ + WhereConst x; + Walker w; + int nChng = 0; + x.pParse = pParse; + do{ + x.nConst = 0; + x.nChng = 0; + x.apExpr = 0; + findConstInWhere(&x, p->pWhere); + if( x.nConst ){ + memset(&w, 0, sizeof(w)); + w.pParse = pParse; + w.xExprCallback = propagateConstantExprRewrite; + w.xSelectCallback = sqlite3SelectWalkNoop; + w.xSelectCallback2 = 0; + w.walkerDepth = 0; + w.u.pConst = &x; + sqlite3WalkExpr(&w, p->pWhere); + sqlite3DbFree(x.pParse->db, x.apExpr); + nChng += x.nChng; + } + }while( x.nChng ); + return nChng; +} + #if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) /* ** Make copies of relevant WHERE clause terms of the outer query into @@ -121284,22 +128175,40 @@ ** ** Do not attempt this optimization if: ** -** (1) The inner query is an aggregate. (In that case, we'd really want -** to copy the outer WHERE-clause terms onto the HAVING clause of the -** inner query. But they probably won't help there so do not bother.) +** (1) (** This restriction was removed on 2017-09-29. We used to +** disallow this optimization for aggregate subqueries, but now +** it is allowed by putting the extra terms on the HAVING clause. +** The added HAVING clause is pointless if the subquery lacks +** a GROUP BY clause. But such a HAVING clause is also harmless +** so there does not appear to be any reason to add extra logic +** to suppress it. **) ** ** (2) The inner query is the recursive part of a common table expression. ** ** (3) The inner query has a LIMIT clause (since the changes to the WHERE -** close would change the meaning of the LIMIT). +** clause would change the meaning of the LIMIT). ** -** (4) The inner query is the right operand of a LEFT JOIN. (The caller -** enforces this restriction since this routine does not have enough -** information to know.) +** (4) The inner query is the right operand of a LEFT JOIN and the +** expression to be pushed down does not come from the ON clause +** on that LEFT JOIN. ** ** (5) The WHERE clause expression originates in the ON or USING clause -** of a LEFT JOIN. +** of a LEFT JOIN where iCursor is not the right-hand table of that +** left join. An example: ** +** SELECT * +** FROM (SELECT 1 AS a1 UNION ALL SELECT 2) AS aa +** JOIN (SELECT 1 AS b2 UNION ALL SELECT 2) AS bb ON (a1=b2) +** LEFT JOIN (SELECT 8 AS c3 UNION ALL SELECT 9) AS cc ON (b2=2); +** +** The correct answer is three rows: (1,1,NULL),(2,2,8),(2,2,9). +** But if the (b2=2) term were to be pushed down into the bb subquery, +** then the (1,1,NULL) row would be suppressed. +** +** (6) The inner query features one or more window-functions (since +** changes to the WHERE clause of the inner query could change the +** window over which window functions are calculated). +** ** Return 0 if no changes are made and non-zero if one or more WHERE clause ** terms are duplicated into the subquery. */ @@ -121307,33 +128216,54 @@ Parse *pParse, /* Parse context (for malloc() and error reporting) */ Select *pSubq, /* The subquery whose WHERE clause is to be augmented */ Expr *pWhere, /* The WHERE clause of the outer query */ - int iCursor /* Cursor number of the subquery */ + int iCursor, /* Cursor number of the subquery */ + int isLeftJoin /* True if pSubq is the right term of a LEFT JOIN */ ){ Expr *pNew; int nChng = 0; - Select *pX; /* For looping over compound SELECTs in pSubq */ if( pWhere==0 ) return 0; - for(pX=pSubq; pX; pX=pX->pPrior){ - if( (pX->selFlags & (SF_Aggregate|SF_Recursive))!=0 ){ - testcase( pX->selFlags & SF_Aggregate ); - testcase( pX->selFlags & SF_Recursive ); - testcase( pX!=pSubq ); - return 0; /* restrictions (1) and (2) */ + if( pSubq->selFlags & SF_Recursive ) return 0; /* restriction (2) */ + +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pSubq->pWin ) return 0; /* restriction (6) */ +#endif + +#ifdef SQLITE_DEBUG + /* Only the first term of a compound can have a WITH clause. But make + ** sure no other terms are marked SF_Recursive in case something changes + ** in the future. + */ + { + Select *pX; + for(pX=pSubq; pX; pX=pX->pPrior){ + assert( (pX->selFlags & (SF_Recursive))==0 ); } } +#endif + if( pSubq->pLimit!=0 ){ return 0; /* restriction (3) */ } while( pWhere->op==TK_AND ){ - nChng += pushDownWhereTerms(pParse, pSubq, pWhere->pRight, iCursor); + nChng += pushDownWhereTerms(pParse, pSubq, pWhere->pRight, + iCursor, isLeftJoin); pWhere = pWhere->pLeft; } - if( ExprHasProperty(pWhere,EP_FromJoin) ) return 0; /* restriction 5 */ + if( isLeftJoin + && (ExprHasProperty(pWhere,EP_FromJoin)==0 + || pWhere->iRightJoinTable!=iCursor) + ){ + return 0; /* restriction (4) */ + } + if( ExprHasProperty(pWhere,EP_FromJoin) && pWhere->iRightJoinTable!=iCursor ){ + return 0; /* restriction (5) */ + } if( sqlite3ExprIsTableConstant(pWhere, iCursor) ){ nChng++; while( pSubq ){ SubstContext x; pNew = sqlite3ExprDup(pParse->db, pWhere, 0); + unsetJoinExpr(pNew, -1); x.pParse = pParse; x.iTable = iCursor; x.iNewTable = iCursor; @@ -121340,7 +128270,11 @@ x.isLeftJoin = 0; x.pEList = pSubq->pEList; pNew = substExpr(&x, pNew); - pSubq->pWhere = sqlite3ExprAnd(pParse->db, pSubq->pWhere, pNew); + if( pSubq->selFlags & SF_Aggregate ){ + pSubq->pHaving = sqlite3ExprAnd(pParse->db, pSubq->pHaving, pNew); + }else{ + pSubq->pWhere = sqlite3ExprAnd(pParse->db, pSubq->pWhere, pNew); + } pSubq = pSubq->pPrior; } } @@ -121349,42 +128283,44 @@ #endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ /* -** Based on the contents of the AggInfo structure indicated by the first -** argument, this function checks if the following are true: +** The pFunc is the only aggregate function in the query. Check to see +** if the query is a candidate for the min/max optimization. ** -** * the query contains just a single aggregate function, -** * the aggregate function is either min() or max(), and -** * the argument to the aggregate function is a column value. +** If the query is a candidate for the min/max optimization, then set +** *ppMinMax to be an ORDER BY clause to be used for the optimization +** and return either WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX depending on +** whether pFunc is a min() or max() function. ** -** If all of the above are true, then WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX -** is returned as appropriate. Also, *ppMinMax is set to point to the -** list of arguments passed to the aggregate before returning. +** If the query is not a candidate for the min/max optimization, return +** WHERE_ORDERBY_NORMAL (which must be zero). ** -** Or, if the conditions above are not met, *ppMinMax is set to 0 and -** WHERE_ORDERBY_NORMAL is returned. +** This routine must be called after aggregate functions have been +** located but before their arguments have been subjected to aggregate +** analysis. */ -static u8 minMaxQuery(AggInfo *pAggInfo, ExprList **ppMinMax){ - int eRet = WHERE_ORDERBY_NORMAL; /* Return value */ +static u8 minMaxQuery(sqlite3 *db, Expr *pFunc, ExprList **ppMinMax){ + int eRet = WHERE_ORDERBY_NORMAL; /* Return value */ + ExprList *pEList = pFunc->x.pList; /* Arguments to agg function */ + const char *zFunc; /* Name of aggregate function pFunc */ + ExprList *pOrderBy; + u8 sortOrder; - *ppMinMax = 0; - if( pAggInfo->nFunc==1 ){ - Expr *pExpr = pAggInfo->aFunc[0].pExpr; /* Aggregate function */ - ExprList *pEList = pExpr->x.pList; /* Arguments to agg function */ - - assert( pExpr->op==TK_AGG_FUNCTION ); - if( pEList && pEList->nExpr==1 && pEList->a[0].pExpr->op==TK_AGG_COLUMN ){ - const char *zFunc = pExpr->u.zToken; - if( sqlite3StrICmp(zFunc, "min")==0 ){ - eRet = WHERE_ORDERBY_MIN; - *ppMinMax = pEList; - }else if( sqlite3StrICmp(zFunc, "max")==0 ){ - eRet = WHERE_ORDERBY_MAX; - *ppMinMax = pEList; - } - } + assert( *ppMinMax==0 ); + assert( pFunc->op==TK_AGG_FUNCTION ); + if( pEList==0 || pEList->nExpr!=1 ) return eRet; + zFunc = pFunc->u.zToken; + if( sqlite3StrICmp(zFunc, "min")==0 ){ + eRet = WHERE_ORDERBY_MIN; + sortOrder = SQLITE_SO_ASC; + }else if( sqlite3StrICmp(zFunc, "max")==0 ){ + eRet = WHERE_ORDERBY_MAX; + sortOrder = SQLITE_SO_DESC; + }else{ + return eRet; } - - assert( *ppMinMax==0 || (*ppMinMax)->nExpr==1 ); + *ppMinMax = pOrderBy = sqlite3ExprListDup(db, pEList, 0); + assert( pOrderBy!=0 || db->mallocFailed ); + if( pOrderBy ) pOrderBy->a[0].sortOrder = sortOrder; return eRet; } @@ -121515,7 +128451,6 @@ assert( pNew->pPrior!=0 ); pNew->pPrior->pNext = pNew; pNew->pLimit = 0; - pNew->pOffset = 0; return WRC_Continue; } @@ -121668,7 +128603,8 @@ ); return SQLITE_ERROR; } - assert( pTab->nTabRef==1 || ((pSel->selFlags&SF_Recursive) && pTab->nTabRef==2 )); + assert( pTab->nTabRef==1 || + ((pSel->selFlags&SF_Recursive) && pTab->nTabRef==2 )); pCte->zCteErr = "circular reference: %s"; pSavedWith = pParse->pWith; @@ -121725,7 +128661,7 @@ */ static void selectPopWith(Walker *pWalker, Select *p){ Parse *pParse = pWalker->pParse; - if( pParse->pWith && p->pPrior==0 ){ + if( OK_IF_ALWAYS_TRUE(pParse->pWith) && p->pPrior==0 ){ With *pWith = findRightmost(p)->pWith; if( pWith!=0 ){ assert( pParse->pWith==pWith ); @@ -121738,6 +128674,35 @@ #endif /* +** The SrcList_item structure passed as the second argument represents a +** sub-query in the FROM clause of a SELECT statement. This function +** allocates and populates the SrcList_item.pTab object. If successful, +** SQLITE_OK is returned. Otherwise, if an OOM error is encountered, +** SQLITE_NOMEM. +*/ +SQLITE_PRIVATE int sqlite3ExpandSubquery(Parse *pParse, struct SrcList_item *pFrom){ + Select *pSel = pFrom->pSelect; + Table *pTab; + + assert( pSel ); + pFrom->pTab = pTab = sqlite3DbMallocZero(pParse->db, sizeof(Table)); + if( pTab==0 ) return SQLITE_NOMEM; + pTab->nTabRef = 1; + if( pFrom->zAlias ){ + pTab->zName = sqlite3DbStrDup(pParse->db, pFrom->zAlias); + }else{ + pTab->zName = sqlite3MPrintf(pParse->db, "subquery_%u", pSel->selId); + } + while( pSel->pPrior ){ pSel = pSel->pPrior; } + sqlite3ColumnsFromExprList(pParse, pSel->pEList,&pTab->nCol,&pTab->aCol); + pTab->iPKey = -1; + pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); + pTab->tabFlags |= TF_Ephemeral; + + return SQLITE_OK; +} + +/* ** This routine is a Walker callback for "expanding" a SELECT statement. ** "Expanding" means to do the following: ** @@ -121770,19 +128735,19 @@ sqlite3 *db = pParse->db; Expr *pE, *pRight, *pExpr; u16 selFlags = p->selFlags; + u32 elistFlags = 0; p->selFlags |= SF_Expanded; if( db->mallocFailed ){ return WRC_Abort; } - if( NEVER(p->pSrc==0) || (selFlags & SF_Expanded)!=0 ){ + assert( p->pSrc!=0 ); + if( (selFlags & SF_Expanded)!=0 ){ return WRC_Prune; } pTabList = p->pSrc; pEList = p->pEList; - if( p->pWith ){ - sqlite3WithPush(pParse, p->pWith, 0); - } + sqlite3WithPush(pParse, p->pWith, 0); /* Make sure cursor numbers have been assigned to all entries in ** the FROM clause of the SELECT statement. @@ -121809,15 +128774,7 @@ assert( pSel!=0 ); assert( pFrom->pTab==0 ); if( sqlite3WalkSelect(pWalker, pSel) ) return WRC_Abort; - pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); - if( pTab==0 ) return WRC_Abort; - pTab->nTabRef = 1; - pTab->zName = sqlite3MPrintf(db, "sqlite_sq_%p", (void*)pTab); - while( pSel->pPrior ){ pSel = pSel->pPrior; } - sqlite3ColumnsFromExprList(pParse, pSel->pEList,&pTab->nCol,&pTab->aCol); - pTab->iPKey = -1; - pTab->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); - pTab->tabFlags |= TF_Ephemeral; + if( sqlite3ExpandSubquery(pParse, pFrom) ) return WRC_Abort; #endif }else{ /* An ordinary table or view name in the FROM clause */ @@ -121840,7 +128797,6 @@ if( sqlite3ViewGetColumnNames(pParse, pTab) ) return WRC_Abort; assert( pFrom->pSelect==0 ); pFrom->pSelect = sqlite3SelectDup(db, pTab->pSelect, 0); - sqlite3SelectSetName(pFrom->pSelect, pTab->zName); nCol = pTab->nCol; pTab->nCol = -1; sqlite3WalkSelect(pWalker, pFrom->pSelect); @@ -121878,6 +128834,7 @@ assert( pE->op!=TK_DOT || pE->pRight!=0 ); assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) ); if( pE->op==TK_DOT && pE->pRight->op==TK_ASTERISK ) break; + elistFlags |= pE->flags; } if( knExpr ){ /* @@ -121893,6 +128850,7 @@ for(k=0; knExpr; k++){ pE = a[k].pExpr; + elistFlags |= pE->flags; pRight = pE->pRight; assert( pE->op!=TK_DOT || pRight!=0 ); if( pE->op!=TK_ASTERISK @@ -122022,12 +128980,15 @@ sqlite3ExprListDelete(db, pEList); p->pEList = pNew; } -#if SQLITE_MAX_COLUMN - if( p->pEList && p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ - sqlite3ErrorMsg(pParse, "too many columns in result set"); - return WRC_Abort; + if( p->pEList ){ + if( p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ + sqlite3ErrorMsg(pParse, "too many columns in result set"); + return WRC_Abort; + } + if( (elistFlags & (EP_HasFunc|EP_Subquery))!=0 ){ + p->selFlags |= SF_ComplexResult; + } } -#endif return WRC_Continue; } @@ -122081,7 +129042,7 @@ Walker w; w.xExprCallback = sqlite3ExprWalkNoop; w.pParse = pParse; - if( pParse->hasCompound ){ + if( OK_IF_ALWAYS_TRUE(pParse->hasCompound) ){ w.xSelectCallback = convertCompoundSelectToSubquery; w.xSelectCallback2 = 0; sqlite3WalkSelect(&w, pSelect); @@ -122113,7 +129074,7 @@ struct SrcList_item *pFrom; assert( p->selFlags & SF_Resolved ); - assert( (p->selFlags & SF_HasTypeInfo)==0 ); + if( p->selFlags & SF_HasTypeInfo ) return; p->selFlags |= SF_HasTypeInfo; pParse = pWalker->pParse; pTabList = p->pSrc; @@ -122169,15 +129130,13 @@ Select *p, /* The SELECT statement being coded. */ NameContext *pOuterNC /* Name context for container */ ){ - sqlite3 *db; - if( NEVER(p==0) ) return; - db = pParse->db; - if( db->mallocFailed ) return; + assert( p!=0 || pParse->db->mallocFailed ); + if( pParse->db->mallocFailed ) return; if( p->selFlags & SF_HasTypeInfo ) return; sqlite3SelectExpand(pParse, p); - if( pParse->nErr || db->mallocFailed ) return; + if( pParse->nErr || pParse->db->mallocFailed ) return; sqlite3ResolveSelectNames(pParse, p, pOuterNC); - if( pParse->nErr || db->mallocFailed ) return; + if( pParse->nErr || pParse->db->mallocFailed ) return; sqlite3SelectAddTypeInfo(pParse, p); } @@ -122218,7 +129177,7 @@ "argument"); pFunc->iDistinct = -1; }else{ - KeyInfo *pKeyInfo = keyInfoFromExprList(pParse, pE->x.pList, 0, 0); + KeyInfo *pKeyInfo = sqlite3KeyInfoFromExprList(pParse, pE->x.pList,0,0); sqlite3VdbeAddOp4(v, OP_OpenEphemeral, pFunc->iDistinct, 0, 0, (char*)pKeyInfo, P4_KEYINFO); } @@ -122242,11 +129201,17 @@ } } + /* ** Update the accumulator memory cells for an aggregate based on ** the current cursor position. +** +** If regAcc is non-zero and there are no min() or max() aggregates +** in pAggInfo, then only populate the pAggInfo->nAccumulator accumulator +** registers i register regAcc contains 0. The caller will take care +** of setting and clearing regAcc. */ -static void updateAccumulator(Parse *pParse, AggInfo *pAggInfo){ +static void updateAccumulator(Parse *pParse, int regAcc, AggInfo *pAggInfo){ Vdbe *v = pParse->pVdbe; int i; int regHit = 0; @@ -122289,36 +129254,24 @@ if( regHit==0 && pAggInfo->nAccumulator ) regHit = ++pParse->nMem; sqlite3VdbeAddOp4(v, OP_CollSeq, regHit, 0, 0, (char *)pColl, P4_COLLSEQ); } - sqlite3VdbeAddOp3(v, OP_AggStep0, 0, regAgg, pF->iMem); + sqlite3VdbeAddOp3(v, OP_AggStep, 0, regAgg, pF->iMem); sqlite3VdbeAppendP4(v, pF->pFunc, P4_FUNCDEF); sqlite3VdbeChangeP5(v, (u8)nArg); - sqlite3ExprCacheAffinityChange(pParse, regAgg, nArg); sqlite3ReleaseTempRange(pParse, regAgg, nArg); if( addrNext ){ sqlite3VdbeResolveLabel(v, addrNext); - sqlite3ExprCacheClear(pParse); } } - - /* Before populating the accumulator registers, clear the column cache. - ** Otherwise, if any of the required column values are already present - ** in registers, sqlite3ExprCode() may use OP_SCopy to copy the value - ** to pC->iMem. But by the time the value is used, the original register - ** may have been used, invalidating the underlying buffer holding the - ** text or blob value. See ticket [883034dcb5]. - ** - ** Another solution would be to change the OP_SCopy used to copy cached - ** values to an OP_Copy. - */ + if( regHit==0 && pAggInfo->nAccumulator ){ + regHit = regAcc; + } if( regHit ){ addrHitTest = sqlite3VdbeAddOp1(v, OP_If, regHit); VdbeCoverage(v); } - sqlite3ExprCacheClear(pParse); for(i=0, pC=pAggInfo->aCol; inAccumulator; i++, pC++){ sqlite3ExprCode(pParse, pC->pExpr, pC->iMem); } pAggInfo->directMode = 0; - sqlite3ExprCacheClear(pParse); if( addrHitTest ){ sqlite3VdbeJumpHere(v, addrHitTest); } @@ -122336,14 +129289,11 @@ ){ if( pParse->explain==2 ){ int bCover = (pIdx!=0 && (HasRowid(pTab) || !IsPrimaryKeyIndex(pIdx))); - char *zEqp = sqlite3MPrintf(pParse->db, "SCAN TABLE %s%s%s", + sqlite3VdbeExplain(pParse, 0, "SCAN TABLE %s%s%s", pTab->zName, bCover ? " USING COVERING INDEX " : "", bCover ? pIdx->zName : "" ); - sqlite3VdbeAddOp4( - pParse->pVdbe, OP_Explain, pParse->iSelectId, 0, 0, zEqp, P4_DYNAMIC - ); } } #else @@ -122351,14 +129301,6 @@ #endif /* -** Context object for havingToWhereExprCb(). -*/ -struct HavingToWhereCtx { - Expr **ppWhere; - ExprList *pGroupBy; -}; - -/* ** sqlite3WalkExpr() callback used by havingToWhere(). ** ** If the node passed to the callback is a TK_AND node, return @@ -122371,15 +129313,16 @@ */ static int havingToWhereExprCb(Walker *pWalker, Expr *pExpr){ if( pExpr->op!=TK_AND ){ - struct HavingToWhereCtx *p = pWalker->u.pHavingCtx; - if( sqlite3ExprIsConstantOrGroupBy(pWalker->pParse, pExpr, p->pGroupBy) ){ + Select *pS = pWalker->u.pSelect; + if( sqlite3ExprIsConstantOrGroupBy(pWalker->pParse, pExpr, pS->pGroupBy) ){ sqlite3 *db = pWalker->pParse->db; Expr *pNew = sqlite3ExprAlloc(db, TK_INTEGER, &sqlite3IntTokens[1], 0); if( pNew ){ - Expr *pWhere = *(p->ppWhere); + Expr *pWhere = pS->pWhere; SWAP(Expr, *pNew, *pExpr); pNew = sqlite3ExprAnd(db, pWhere, pNew); - *(p->ppWhere) = pNew; + pS->pWhere = pNew; + pWalker->eCode = 1; } } return WRC_Prune; @@ -122402,23 +129345,19 @@ ** entirely of constants and expressions that are also GROUP BY terms that ** use the "BINARY" collation sequence. */ -static void havingToWhere( - Parse *pParse, - ExprList *pGroupBy, - Expr *pHaving, - Expr **ppWhere -){ - struct HavingToWhereCtx sCtx; +static void havingToWhere(Parse *pParse, Select *p){ Walker sWalker; - - sCtx.ppWhere = ppWhere; - sCtx.pGroupBy = pGroupBy; - memset(&sWalker, 0, sizeof(sWalker)); sWalker.pParse = pParse; sWalker.xExprCallback = havingToWhereExprCb; - sWalker.u.pHavingCtx = &sCtx; - sqlite3WalkExpr(&sWalker, pHaving); + sWalker.u.pSelect = p; + sqlite3WalkExpr(&sWalker, p->pHaving); +#if SELECTTRACE_ENABLED + if( sWalker.eCode && (sqlite3SelectTrace & 0x100)!=0 ){ + SELECTTRACE(0x100,pParse,p,("Move HAVING terms into WHERE:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif } /* @@ -122462,6 +129401,7 @@ ** The transformation only works if all of the following are true: ** ** * The subquery is a UNION ALL of two or more terms +** * The subquery does not have a LIMIT clause ** * There is no WHERE or GROUP BY or HAVING clauses on the subqueries ** * The outer query is a simple count(*) ** @@ -122472,24 +129412,25 @@ Expr *pExpr; Expr *pCount; sqlite3 *db; - if( (p->selFlags & SF_Aggregate)==0 ) return 0; /* This is an aggregate query */ + if( (p->selFlags & SF_Aggregate)==0 ) return 0; /* This is an aggregate */ if( p->pEList->nExpr!=1 ) return 0; /* Single result column */ pExpr = p->pEList->a[0].pExpr; if( pExpr->op!=TK_AGG_FUNCTION ) return 0; /* Result is an aggregate */ - if( sqlite3_stricmp(pExpr->u.zToken,"count") ) return 0; /* Must be count() */ + if( sqlite3_stricmp(pExpr->u.zToken,"count") ) return 0; /* Is count() */ if( pExpr->x.pList!=0 ) return 0; /* Must be count(*) */ - if( p->pSrc->nSrc!=1 ) return 0; /* One table in the FROM clause */ + if( p->pSrc->nSrc!=1 ) return 0; /* One table in FROM */ pSub = p->pSrc->a[0].pSelect; if( pSub==0 ) return 0; /* The FROM is a subquery */ - if( pSub->pPrior==0 ) return 0; /* Must be a compound subquery */ + if( pSub->pPrior==0 ) return 0; /* Must be a compound ry */ do{ if( pSub->op!=TK_ALL && pSub->pPrior ) return 0; /* Must be UNION ALL */ if( pSub->pWhere ) return 0; /* No WHERE clause */ + if( pSub->pLimit ) return 0; /* No LIMIT clause */ if( pSub->selFlags & SF_Aggregate ) return 0; /* Not an aggregate */ - pSub = pSub->pPrior; /* Repeat over compound terms */ + pSub = pSub->pPrior; /* Repeat over compound */ }while( pSub ); - /* If we reach this point, that means it is OK to perform the transformation */ + /* If we reach this point then it is OK to perform the transformation */ db = pParse->db; pCount = pExpr; @@ -122564,13 +129505,11 @@ AggInfo sAggInfo; /* Information used by aggregate queries */ int iEnd; /* Address of the end of the query */ sqlite3 *db; /* The database connection */ + ExprList *pMinMaxOrderBy = 0; /* Added ORDER BY for min/max queries */ + u8 minMaxFlag; /* Flag for min/max queries */ -#ifndef SQLITE_OMIT_EXPLAIN - int iRestoreSelectId = pParse->iSelectId; - pParse->iSelectId = pParse->iNextSelectId++; -#endif - db = pParse->db; + v = sqlite3GetVdbe(pParse); if( p==0 || db->mallocFailed || pParse->nErr ){ return 1; } @@ -122577,8 +129516,7 @@ if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1; memset(&sAggInfo, 0, sizeof(sAggInfo)); #if SELECTTRACE_ENABLED - pParse->nSelectIndent++; - SELECTTRACE(1,pParse,p, ("begin processing:\n")); + SELECTTRACE(1,pParse,p, ("begin processing:\n", pParse->addrExplain)); if( sqlite3SelectTrace & 0x100 ){ sqlite3TreeViewSelect(0, p, 0); } @@ -122600,37 +129538,60 @@ p->selFlags &= ~SF_Distinct; } sqlite3SelectPrep(pParse, p, 0); - memset(&sSort, 0, sizeof(sSort)); - sSort.pOrderBy = p->pOrderBy; - pTabList = p->pSrc; if( pParse->nErr || db->mallocFailed ){ goto select_end; } assert( p->pEList!=0 ); - isAgg = (p->selFlags & SF_Aggregate)!=0; #if SELECTTRACE_ENABLED - if( sqlite3SelectTrace & 0x100 ){ - SELECTTRACE(0x100,pParse,p, ("after name resolution:\n")); + if( sqlite3SelectTrace & 0x104 ){ + SELECTTRACE(0x104,pParse,p, ("after name resolution:\n")); sqlite3TreeViewSelect(0, p, 0); } #endif - /* Get a pointer the VDBE under construction, allocating a new VDBE if one - ** does not already exist */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto select_end; if( pDest->eDest==SRT_Output ){ generateColumnNames(pParse, p); } - /* Try to flatten subqueries in the FROM clause up into the main query +#ifndef SQLITE_OMIT_WINDOWFUNC + if( sqlite3WindowRewrite(pParse, p) ){ + goto select_end; + } +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x108 ){ + SELECTTRACE(0x104,pParse,p, ("after window rewrite:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif +#endif /* SQLITE_OMIT_WINDOWFUNC */ + pTabList = p->pSrc; + isAgg = (p->selFlags & SF_Aggregate)!=0; + memset(&sSort, 0, sizeof(sSort)); + sSort.pOrderBy = p->pOrderBy; + + /* Try to various optimizations (flattening subqueries, and strength + ** reduction of join operators) in the FROM clause up into the main query */ #if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) for(i=0; !p->pPrior && inSrc; i++){ struct SrcList_item *pItem = &pTabList->a[i]; Select *pSub = pItem->pSelect; - int isAggSub; Table *pTab = pItem->pTab; + + /* Convert LEFT JOIN into JOIN if there are terms of the right table + ** of the LEFT JOIN used in the WHERE clause. + */ + if( (pItem->fg.jointype & JT_LEFT)!=0 + && sqlite3ExprImpliesNonNullRow(p->pWhere, pItem->iCursor) + && OptimizationEnabled(db, SQLITE_SimplifyJoin) + ){ + SELECTTRACE(0x100,pParse,p, + ("LEFT-JOIN simplifies to JOIN on term %d\n",i)); + pItem->fg.jointype &= ~(JT_LEFT|JT_OUTER); + unsetJoinExpr(p->pWhere, pItem->iCursor); + } + + /* No futher action if this term of the FROM clause is no a subquery */ if( pSub==0 ) continue; /* Catch mismatch in the declared columns of a view and the number of @@ -122641,13 +129602,45 @@ goto select_end; } - isAggSub = (pSub->selFlags & SF_Aggregate)!=0; - if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){ + /* Do not try to flatten an aggregate subquery. + ** + ** Flattening an aggregate subquery is only possible if the outer query + ** is not a join. But if the outer query is not a join, then the subquery + ** will be implemented as a co-routine and there is no advantage to + ** flattening in that case. + */ + if( (pSub->selFlags & SF_Aggregate)!=0 ) continue; + assert( pSub->pGroupBy==0 ); + + /* If the outer query contains a "complex" result set (that is, + ** if the result set of the outer query uses functions or subqueries) + ** and if the subquery contains an ORDER BY clause and if + ** it will be implemented as a co-routine, then do not flatten. This + ** restriction allows SQL constructs like this: + ** + ** SELECT expensive_function(x) + ** FROM (SELECT x FROM tab ORDER BY y LIMIT 10); + ** + ** The expensive_function() is only computed on the 10 rows that + ** are output, rather than every row of the table. + ** + ** The requirement that the outer query have a complex result set + ** means that flattening does occur on simpler SQL constraints without + ** the expensive_function() like: + ** + ** SELECT x FROM (SELECT x FROM tab ORDER BY y LIMIT 10); + */ + if( pSub->pOrderBy!=0 + && i==0 + && (p->selFlags & SF_ComplexResult)!=0 + && (pTabList->nSrc==1 + || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0) + ){ + continue; + } + + if( flattenSubquery(pParse, p, i, isAgg) ){ /* This subquery can be absorbed into its parent. */ - if( isAggSub ){ - isAgg = 1; - p->selFlags |= SF_Aggregate; - } i = -1; } pTabList = p->pSrc; @@ -122664,15 +129657,46 @@ */ if( p->pPrior ){ rc = multiSelect(pParse, p, pDest); - explainSetInteger(pParse->iSelectId, iRestoreSelectId); #if SELECTTRACE_ENABLED - SELECTTRACE(1,pParse,p,("end compound-select processing\n")); - pParse->nSelectIndent--; + SELECTTRACE(0x1,pParse,p,("end compound-select processing\n")); + if( (sqlite3SelectTrace & 0x2000)!=0 && ExplainQueryPlanParent(pParse)==0 ){ + sqlite3TreeViewSelect(0, p, 0); + } #endif + if( p->pNext==0 ) ExplainQueryPlanPop(pParse); return rc; } #endif + /* Do the WHERE-clause constant propagation optimization if this is + ** a join. No need to speed time on this operation for non-join queries + ** as the equivalent optimization will be handled by query planner in + ** sqlite3WhereBegin(). + */ + if( pTabList->nSrc>1 + && OptimizationEnabled(db, SQLITE_PropagateConst) + && propagateConstants(pParse, p) + ){ +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x100 ){ + SELECTTRACE(0x100,pParse,p,("After constant propagation:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + }else{ + SELECTTRACE(0x100,pParse,p,("Constant propagation not helpful\n")); + } + +#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION + if( OptimizationEnabled(db, SQLITE_QueryFlattener|SQLITE_CountOfView) + && countOfViewOptimization(pParse, p) + ){ + if( db->mallocFailed ) goto select_end; + pEList = p->pEList; + pTabList = p->pSrc; + } +#endif + /* For each term in the FROM clause, do two things: ** (1) Authorized unreferenced tables ** (2) Generate code for all sub-queries @@ -122681,10 +129705,14 @@ struct SrcList_item *pItem = &pTabList->a[i]; SelectDest dest; Select *pSub; +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + const char *zSavedAuthContext; +#endif - /* Issue SQLITE_READ authorizations with a fake column name for any tables that - ** are referenced but from which no values are extracted. Examples of where these - ** kinds of null SQLITE_READ authorizations would occur: + /* Issue SQLITE_READ authorizations with a fake column name for any + ** tables that are referenced but from which no values are extracted. + ** Examples of where these kinds of null SQLITE_READ authorizations + ** would occur: ** ** SELECT count(*) FROM t1; -- SQLITE_READ t1."" ** SELECT t1.* FROM t1, t2; -- SQLITE_READ t2."" @@ -122692,10 +129720,10 @@ ** The fake column name is an empty string. It is possible for a table to ** have a column named by the empty string, in which case there is no way to ** distinguish between an unreferenced table and an actual reference to the - ** "" column. The original design was for the fake column name to be a NULL, + ** "" column. The original design was for the fake column name to be a NULL, ** which would be unambiguous. But legacy authorization callbacks might - ** assume the column name is non-NULL and segfault. The use of an empty string - ** for the fake column name seems safer. + ** assume the column name is non-NULL and segfault. The use of an empty + ** string for the fake column name seems safer. */ if( pItem->colUsed==0 ){ sqlite3AuthCheck(pParse, SQLITE_READ, pItem->zName, "", pItem->zDatabase); @@ -122736,27 +129764,29 @@ /* Make copies of constant WHERE-clause terms in the outer query down ** inside the subquery. This can help the subquery to run more efficiently. */ - if( (pItem->fg.jointype & JT_OUTER)==0 - && pushDownWhereTerms(pParse, pSub, p->pWhere, pItem->iCursor) + if( OptimizationEnabled(db, SQLITE_PushDown) + && pushDownWhereTerms(pParse, pSub, p->pWhere, pItem->iCursor, + (pItem->fg.jointype & JT_OUTER)!=0) ){ #if SELECTTRACE_ENABLED if( sqlite3SelectTrace & 0x100 ){ - SELECTTRACE(0x100,pParse,p,("After WHERE-clause push-down:\n")); + SELECTTRACE(0x100,pParse,p, + ("After WHERE-clause push-down into subquery %d:\n", pSub->selId)); sqlite3TreeViewSelect(0, p, 0); } #endif + }else{ + SELECTTRACE(0x100,pParse,p,("Push-down not possible\n")); } + zSavedAuthContext = pParse->zAuthContext; + pParse->zAuthContext = pItem->zName; + /* Generate code to implement the subquery ** - ** The subquery is implemented as a co-routine if all of these are true: - ** (1) The subquery is guaranteed to be the outer loop (so that it - ** does not need to be computed more than once) - ** (2) The ALL keyword after SELECT is omitted. (Applications are - ** allowed to say "SELECT ALL" instead of just "SELECT" to disable - ** the use of co-routines.) - ** (3) Co-routines are not disabled using sqlite3_test_control() - ** with SQLITE_TESTCTRL_OPTIMIZATIONS. + ** The subquery is implemented as a co-routine if the subquery is + ** guaranteed to be the outer loop (so that it does not need to be + ** computed more than once) ** ** TODO: Are there other reasons beside (1) to use a co-routine ** implementation? @@ -122764,19 +129794,18 @@ if( i==0 && (pTabList->nSrc==1 || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0) /* (1) */ - && (p->selFlags & SF_All)==0 /* (2) */ - && OptimizationEnabled(db, SQLITE_SubqCoroutine) /* (3) */ ){ /* Implement a co-routine that will return a single row of the result ** set on each invocation. */ int addrTop = sqlite3VdbeCurrentAddr(v)+1; + pItem->regReturn = ++pParse->nMem; sqlite3VdbeAddOp3(v, OP_InitCoroutine, pItem->regReturn, 0, addrTop); VdbeComment((v, "%s", pItem->pTab->zName)); pItem->addrFillSub = addrTop; sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn); - explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); + ExplainQueryPlan((pParse, 1, "CO-ROUTINE %u", pSub->selId)); sqlite3Select(pParse, pSub, &dest); pItem->pTab->nRowLogEst = pSub->nSelectRow; pItem->fg.viaCoroutine = 1; @@ -122811,12 +129840,11 @@ pPrior = isSelfJoinView(pTabList, pItem); if( pPrior ){ sqlite3VdbeAddOp2(v, OP_OpenDup, pItem->iCursor, pPrior->iCursor); - explainSetInteger(pItem->iSelectId, pPrior->iSelectId); assert( pPrior->pSelect!=0 ); pSub->nSelectRow = pPrior->pSelect->nSelectRow; }else{ sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor); - explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); + ExplainQueryPlan((pParse, 1, "MATERIALIZE %u", pSub->selId)); sqlite3Select(pParse, pSub, &dest); } pItem->pTab->nRowLogEst = pSub->nSelectRow; @@ -122828,6 +129856,7 @@ } if( db->mallocFailed ) goto select_end; pParse->nHeight -= sqlite3SelectExprHeight(p); + pParse->zAuthContext = zSavedAuthContext; #endif } @@ -122846,16 +129875,6 @@ } #endif -#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION - if( OptimizationEnabled(db, SQLITE_QueryFlattener|SQLITE_CountOfView) - && countOfViewOptimization(pParse, p) - ){ - if( db->mallocFailed ) goto select_end; - pEList = p->pEList; - pTabList = p->pSrc; - } -#endif - /* If the query is DISTINCT with an ORDER BY but is not an aggregate, and ** if the select-list is the same as the ORDER BY list, then this query ** can be rewritten as a GROUP BY. In other words, this: @@ -122899,7 +129918,8 @@ */ if( sSort.pOrderBy ){ KeyInfo *pKeyInfo; - pKeyInfo = keyInfoFromExprList(pParse, sSort.pOrderBy, 0, pEList->nExpr); + pKeyInfo = sqlite3KeyInfoFromExprList( + pParse, sSort.pOrderBy, 0, pEList->nExpr); sSort.iECursor = pParse->nTab++; sSort.addrSortIndex = sqlite3VdbeAddOp4(v, OP_OpenEphemeral, @@ -122933,9 +129953,9 @@ if( p->selFlags & SF_Distinct ){ sDistinct.tabTnct = pParse->nTab++; sDistinct.addrTnct = sqlite3VdbeAddOp4(v, OP_OpenEphemeral, - sDistinct.tabTnct, 0, 0, - (char*)keyInfoFromExprList(pParse, p->pEList,0,0), - P4_KEYINFO); + sDistinct.tabTnct, 0, 0, + (char*)sqlite3KeyInfoFromExprList(pParse, p->pEList,0,0), + P4_KEYINFO); sqlite3VdbeChangeP5(v, BTREE_UNORDERED); sDistinct.eTnctType = WHERE_DISTINCT_UNORDERED; }else{ @@ -122944,11 +129964,19 @@ if( !isAgg && pGroupBy==0 ){ /* No aggregate functions and no GROUP BY clause */ - u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0); + u16 wctrlFlags = (sDistinct.isTnct ? WHERE_WANT_DISTINCT : 0) + | (p->selFlags & SF_FixedLimit); +#ifndef SQLITE_OMIT_WINDOWFUNC + Window *pWin = p->pWin; /* Master window object (or NULL) */ + if( pWin ){ + sqlite3WindowCodeInit(pParse, pWin); + } +#endif assert( WHERE_USE_LIMIT==SF_FixedLimit ); - wctrlFlags |= p->selFlags & SF_FixedLimit; + /* Begin the database scan. */ + SELECTTRACE(1,pParse,p,("WhereBegin\n")); pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy, p->pEList, wctrlFlags, p->nSelectRow); if( pWInfo==0 ) goto select_end; @@ -122960,7 +129988,7 @@ } if( sSort.pOrderBy ){ sSort.nOBSat = sqlite3WhereIsOrdered(pWInfo); - sSort.bOrderedInnerLoop = sqlite3WhereOrderedInnerLoop(pWInfo); + sSort.labelOBLopt = sqlite3WhereOrderByLimitOptLabel(pWInfo); if( sSort.nOBSat==sSort.pOrderBy->nExpr ){ sSort.pOrderBy = 0; } @@ -122974,14 +130002,37 @@ sqlite3VdbeChangeToNoop(v, sSort.addrSortIndex); } - /* Use the standard inner loop. */ - selectInnerLoop(pParse, p, pEList, -1, &sSort, &sDistinct, pDest, - sqlite3WhereContinueLabel(pWInfo), - sqlite3WhereBreakLabel(pWInfo)); + assert( p->pEList==pEList ); +#ifndef SQLITE_OMIT_WINDOWFUNC + if( pWin ){ + int addrGosub = sqlite3VdbeMakeLabel(v); + int iCont = sqlite3VdbeMakeLabel(v); + int iBreak = sqlite3VdbeMakeLabel(v); + int regGosub = ++pParse->nMem; - /* End the database scan loop. - */ - sqlite3WhereEnd(pWInfo); + sqlite3WindowCodeStep(pParse, p, pWInfo, regGosub, addrGosub); + + sqlite3VdbeAddOp2(v, OP_Goto, 0, iBreak); + sqlite3VdbeResolveLabel(v, addrGosub); + VdbeNoopComment((v, "inner-loop subroutine")); + sSort.labelOBLopt = 0; + selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp1(v, OP_Return, regGosub); + VdbeComment((v, "end inner-loop subroutine")); + sqlite3VdbeResolveLabel(v, iBreak); + }else +#endif /* SQLITE_OMIT_WINDOWFUNC */ + { + /* Use the standard inner loop. */ + selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest, + sqlite3WhereContinueLabel(pWInfo), + sqlite3WhereBreakLabel(pWInfo)); + + /* End the database scan loop. + */ + sqlite3WhereEnd(pWInfo); + } }else{ /* This case when there exist aggregate functions or a GROUP BY clause ** or both */ @@ -123040,7 +130091,8 @@ memset(&sNC, 0, sizeof(sNC)); sNC.pParse = pParse; sNC.pSrcList = pTabList; - sNC.pAggInfo = &sAggInfo; + sNC.uNC.pAggInfo = &sAggInfo; + VVA_ONLY( sNC.ncFlags = NC_UAggInfo; ) sAggInfo.mnReg = pParse->nMem+1; sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr : 0; sAggInfo.pGroupBy = pGroupBy; @@ -123049,12 +130101,19 @@ if( pHaving ){ if( pGroupBy ){ assert( pWhere==p->pWhere ); - havingToWhere(pParse, pGroupBy, pHaving, &p->pWhere); + assert( pHaving==p->pHaving ); + assert( pGroupBy==p->pGroupBy ); + havingToWhere(pParse, p); pWhere = p->pWhere; } sqlite3ExprAnalyzeAggregates(&sNC, pHaving); } sAggInfo.nAccumulator = sAggInfo.nColumn; + if( p->pGroupBy==0 && p->pHaving==0 && sAggInfo.nFunc==1 ){ + minMaxFlag = minMaxQuery(db, sAggInfo.aFunc[0].pExpr, &pMinMaxOrderBy); + }else{ + minMaxFlag = WHERE_ORDERBY_NORMAL; + } for(i=0; inMem; if( db->mallocFailed ) goto select_end; +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x400 ){ + int ii; + SELECTTRACE(0x400,pParse,p,("After aggregate analysis:\n")); + sqlite3TreeViewSelect(0, p, 0); + for(ii=0; iinTab++; - pKeyInfo = keyInfoFromExprList(pParse, pGroupBy, 0, sAggInfo.nColumn); + pKeyInfo = sqlite3KeyInfoFromExprList(pParse,pGroupBy,0,sAggInfo.nColumn); addrSortingIdx = sqlite3VdbeAddOp4(v, OP_SorterOpen, sAggInfo.sortingIdx, sAggInfo.nSortingColumn, 0, (char*)pKeyInfo, P4_KEYINFO); @@ -123103,8 +130180,6 @@ pParse->nMem += pGroupBy->nExpr; sqlite3VdbeAddOp2(v, OP_Integer, 0, iAbortFlag); VdbeComment((v, "clear abort flag")); - sqlite3VdbeAddOp2(v, OP_Integer, 0, iUseFlag); - VdbeComment((v, "indicate accumulator empty")); sqlite3VdbeAddOp3(v, OP_Null, 0, iAMem, iAMem+pGroupBy->nExpr-1); /* Begin a loop that will extract all source rows in GROUP BY order. @@ -123113,6 +130188,7 @@ ** in the right order to begin with. */ sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); + SELECTTRACE(1,pParse,p,("WhereBegin\n")); pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0, WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0 ); @@ -123149,7 +130225,6 @@ } } regBase = sqlite3GetTempRange(pParse, nCol); - sqlite3ExprCacheClear(pParse); sqlite3ExprCodeExprList(pParse, pGroupBy, regBase, 0, 0); j = nGroupBy; for(i=0; iiSorterColumn>=j ){ int r1 = j + regBase; - sqlite3ExprCodeGetColumnToReg(pParse, - pCol->pTab, pCol->iColumn, pCol->iTable, r1); + sqlite3ExprCodeGetColumnOfTable(v, + pCol->pTab, pCol->iTable, pCol->iColumn, r1); j++; } } @@ -123173,8 +130248,6 @@ sqlite3VdbeAddOp2(v, OP_SorterSort, sAggInfo.sortingIdx, addrEnd); VdbeComment((v, "GROUP BY sort")); VdbeCoverage(v); sAggInfo.useSortingIdx = 1; - sqlite3ExprCacheClear(pParse); - } /* If the index or temporary table used by the GROUP BY sort @@ -123197,7 +130270,6 @@ ** from the previous row currently stored in a0, a1, a2... */ addrTopOfLoop = sqlite3VdbeCurrentAddr(v); - sqlite3ExprCacheClear(pParse); if( groupBySort ){ sqlite3VdbeAddOp3(v, OP_SorterData, sAggInfo.sortingIdx, sortOut, sortPTab); @@ -123236,7 +130308,7 @@ ** the current row */ sqlite3VdbeJumpHere(v, addr1); - updateAccumulator(pParse, &sAggInfo); + updateAccumulator(pParse, iUseFlag, &sAggInfo); sqlite3VdbeAddOp2(v, OP_Integer, 1, iUseFlag); VdbeComment((v, "indicate data in accumulator")); @@ -123278,7 +130350,7 @@ sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); finalizeAggFunctions(pParse, &sAggInfo); sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL); - selectInnerLoop(pParse, p, p->pEList, -1, &sSort, + selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest, addrOutputRow+1, addrSetAbort); sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); @@ -123288,11 +130360,12 @@ */ sqlite3VdbeResolveLabel(v, addrReset); resetAccumulator(pParse, &sAggInfo); + sqlite3VdbeAddOp2(v, OP_Integer, 0, iUseFlag); + VdbeComment((v, "indicate accumulator empty")); sqlite3VdbeAddOp1(v, OP_Return, regReset); } /* endif pGroupBy. Begin aggregate queries without GROUP BY: */ else { - ExprList *pDel = 0; #ifndef SQLITE_OMIT_BTREECOUNT Table *pTab; if( (pTab = isSimpleCount(p, &sAggInfo))!=0 ){ @@ -123354,67 +130427,50 @@ }else #endif /* SQLITE_OMIT_BTREECOUNT */ { - /* Check if the query is of one of the following forms: - ** - ** SELECT min(x) FROM ... - ** SELECT max(x) FROM ... - ** - ** If it is, then ask the code in where.c to attempt to sort results - ** as if there was an "ORDER ON x" or "ORDER ON x DESC" clause. - ** If where.c is able to produce results sorted in this order, then - ** add vdbe code to break out of the processing loop after the - ** first iteration (since the first iteration of the loop is - ** guaranteed to operate on the row with the minimum or maximum - ** value of x, the only row required). - ** - ** A special flag must be passed to sqlite3WhereBegin() to slightly - ** modify behavior as follows: - ** - ** + If the query is a "SELECT min(x)", then the loop coded by - ** where.c should not iterate over any values with a NULL value - ** for x. - ** - ** + The optimizer code in where.c (the thing that decides which - ** index or indices to use) should place a different priority on - ** satisfying the 'ORDER BY' clause than it does in other cases. - ** Refer to code and comments in where.c for details. - */ - ExprList *pMinMax = 0; - u8 flag = WHERE_ORDERBY_NORMAL; - - assert( p->pGroupBy==0 ); - assert( flag==0 ); - if( p->pHaving==0 ){ - flag = minMaxQuery(&sAggInfo, &pMinMax); - } - assert( flag==0 || (pMinMax!=0 && pMinMax->nExpr==1) ); + int regAcc = 0; /* "populate accumulators" flag */ - if( flag ){ - pMinMax = sqlite3ExprListDup(db, pMinMax, 0); - pDel = pMinMax; - assert( db->mallocFailed || pMinMax!=0 ); - if( !db->mallocFailed ){ - pMinMax->a[0].sortOrder = flag!=WHERE_ORDERBY_MIN ?1:0; - pMinMax->a[0].pExpr->op = TK_COLUMN; + /* If there are accumulator registers but no min() or max() functions, + ** allocate register regAcc. Register regAcc will contain 0 the first + ** time the inner loop runs, and 1 thereafter. The code generated + ** by updateAccumulator() only updates the accumulator registers if + ** regAcc contains 0. */ + if( sAggInfo.nAccumulator ){ + for(i=0; ifuncFlags&SQLITE_FUNC_NEEDCOLL ) break; } + if( i==sAggInfo.nFunc ){ + regAcc = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Integer, 0, regAcc); + } } - + /* This case runs if the aggregate has no GROUP BY clause. The ** processing is much simpler since there is only a single row ** of output. */ + assert( p->pGroupBy==0 ); resetAccumulator(pParse, &sAggInfo); - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMax, 0,flag,0); + + /* If this query is a candidate for the min/max optimization, then + ** minMaxFlag will have been previously set to either + ** WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX and pMinMaxOrderBy will + ** be an appropriate ORDER BY expression for the optimization. + */ + assert( minMaxFlag==WHERE_ORDERBY_NORMAL || pMinMaxOrderBy!=0 ); + assert( pMinMaxOrderBy==0 || pMinMaxOrderBy->nExpr==1 ); + + SELECTTRACE(1,pParse,p,("WhereBegin\n")); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMaxOrderBy, + 0, minMaxFlag, 0); if( pWInfo==0 ){ - sqlite3ExprListDelete(db, pDel); goto select_end; } - updateAccumulator(pParse, &sAggInfo); - assert( pMinMax==0 || pMinMax->nExpr==1 ); + updateAccumulator(pParse, regAcc, &sAggInfo); + if( regAcc ) sqlite3VdbeAddOp2(v, OP_Integer, 1, regAcc); if( sqlite3WhereIsOrdered(pWInfo)>0 ){ sqlite3VdbeGoto(v, sqlite3WhereBreakLabel(pWInfo)); VdbeComment((v, "%s() by index", - (flag==WHERE_ORDERBY_MIN?"min":"max"))); + (minMaxFlag==WHERE_ORDERBY_MIN?"min":"max"))); } sqlite3WhereEnd(pWInfo); finalizeAggFunctions(pParse, &sAggInfo); @@ -123422,9 +130478,8 @@ sSort.pOrderBy = 0; sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL); - selectInnerLoop(pParse, p, p->pEList, -1, 0, 0, + selectInnerLoop(pParse, p, -1, 0, 0, pDest, addrEnd, addrEnd); - sqlite3ExprListDelete(db, pDel); } sqlite3VdbeResolveLabel(v, addrEnd); @@ -123440,6 +130495,7 @@ if( sSort.pOrderBy ){ explainTempTable(pParse, sSort.nOBSat>0 ? "RIGHT PART OF ORDER BY":"ORDER BY"); + assert( p->pEList==pEList ); generateSortTail(pParse, p, &sSort, pEList->nExpr, pDest); } @@ -123455,14 +130511,16 @@ ** successful coding of the SELECT. */ select_end: - explainSetInteger(pParse->iSelectId, iRestoreSelectId); - + sqlite3ExprListDelete(db, pMinMaxOrderBy); sqlite3DbFree(db, sAggInfo.aCol); sqlite3DbFree(db, sAggInfo.aFunc); #if SELECTTRACE_ENABLED - SELECTTRACE(1,pParse,p,("end processing\n")); - pParse->nSelectIndent--; + SELECTTRACE(0x1,pParse,p,("end processing\n")); + if( (sqlite3SelectTrace & 0x2000)!=0 && ExplainQueryPlanParent(pParse)==0 ){ + sqlite3TreeViewSelect(0, p, 0); + } #endif + ExplainQueryPlanPop(pParse); return rc; } @@ -123696,6 +130754,8 @@ sqlite3ExprListDelete(db, pTmp->pExprList); sqlite3SelectDelete(db, pTmp->pSelect); sqlite3IdListDelete(db, pTmp->pIdList); + sqlite3UpsertDelete(db, pTmp->pUpsert); + sqlite3DbFree(db, pTmp->zSpan); sqlite3DbFree(db, pTmp); } @@ -123850,14 +130910,16 @@ goto trigger_cleanup; } assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash),zName) ){ - if( !noErr ){ - sqlite3ErrorMsg(pParse, "trigger %T already exists", pName); - }else{ - assert( !db->init.busy ); - sqlite3CodeVerifySchema(pParse, iDb); + if( !IN_RENAME_OBJECT ){ + if( sqlite3HashFind(&(db->aDb[iDb].pSchema->trigHash),zName) ){ + if( !noErr ){ + sqlite3ErrorMsg(pParse, "trigger %T already exists", pName); + }else{ + assert( !db->init.busy ); + sqlite3CodeVerifySchema(pParse, iDb); + } + goto trigger_cleanup; } - goto trigger_cleanup; } /* Do not create a trigger on a system table */ @@ -123881,7 +130943,7 @@ } #ifndef SQLITE_OMIT_AUTHORIZATION - { + if( !IN_RENAME_OBJECT ){ int iTabDb = sqlite3SchemaToIndex(db, pTab->pSchema); int code = SQLITE_CREATE_TRIGGER; const char *zDb = db->aDb[iTabDb].zDbSName; @@ -123915,8 +130977,15 @@ pTrigger->pTabSchema = pTab->pSchema; pTrigger->op = (u8)op; pTrigger->tr_tm = tr_tm==TK_BEFORE ? TRIGGER_BEFORE : TRIGGER_AFTER; - pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE); - pTrigger->pColumns = sqlite3IdListDup(db, pColumns); + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenRemap(pParse, pTrigger->table, pTableName->a[0].zName); + pTrigger->pWhen = pWhen; + pWhen = 0; + }else{ + pTrigger->pWhen = sqlite3ExprDup(db, pWhen, EXPRDUP_REDUCE); + } + pTrigger->pColumns = pColumns; + pColumns = 0; assert( pParse->pNewTrigger==0 ); pParse->pNewTrigger = pTrigger; @@ -123965,6 +131034,14 @@ goto triggerfinish_cleanup; } +#ifndef SQLITE_OMIT_ALTERTABLE + if( IN_RENAME_OBJECT ){ + assert( !db->init.busy ); + pParse->pNewTrigger = pTrig; + pTrig = 0; + }else +#endif + /* if we are not initializing, ** build the sqlite_master entry */ @@ -124006,11 +131083,22 @@ triggerfinish_cleanup: sqlite3DeleteTrigger(db, pTrig); - assert( !pParse->pNewTrigger ); + assert( IN_RENAME_OBJECT || !pParse->pNewTrigger ); sqlite3DeleteTriggerStep(db, pStepList); } /* +** Duplicate a range of text from an SQL statement, then convert all +** whitespace characters into ordinary space characters. +*/ +static char *triggerSpanDup(sqlite3 *db, const char *zStart, const char *zEnd){ + char *z = sqlite3DbSpanDup(db, zStart, zEnd); + int i; + if( z ) for(i=0; z[i]; i++) if( sqlite3Isspace(z[i]) ) z[i] = ' '; + return z; +} + +/* ** Turn a SELECT statement (that the pSelect parameter points to) into ** a trigger step. Return a pointer to a TriggerStep structure. ** @@ -124017,7 +131105,12 @@ ** The parser calls this routine when it finds a SELECT statement in ** body of a TRIGGER. */ -SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3 *db, Select *pSelect){ +SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep( + sqlite3 *db, /* Database connection */ + Select *pSelect, /* The SELECT statement */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ +){ TriggerStep *pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep)); if( pTriggerStep==0 ) { sqlite3SelectDelete(db, pSelect); @@ -124026,6 +131119,7 @@ pTriggerStep->op = TK_SELECT; pTriggerStep->pSelect = pSelect; pTriggerStep->orconf = OE_Default; + pTriggerStep->zSpan = triggerSpanDup(db, zStart, zEnd); return pTriggerStep; } @@ -124036,10 +131130,13 @@ ** If an OOM error occurs, NULL is returned and db->mallocFailed is set. */ static TriggerStep *triggerStepAllocate( - sqlite3 *db, /* Database connection */ + Parse *pParse, /* Parser context */ u8 op, /* Trigger opcode */ - Token *pName /* The target name */ + Token *pName, /* The target name */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ + sqlite3 *db = pParse->db; TriggerStep *pTriggerStep; pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep) + pName->n + 1); @@ -124049,6 +131146,10 @@ sqlite3Dequote(z); pTriggerStep->zTarget = z; pTriggerStep->op = op; + pTriggerStep->zSpan = triggerSpanDup(db, zStart, zEnd); + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenMap(pParse, pTriggerStep->zTarget, pName); + } } return pTriggerStep; } @@ -124061,23 +131162,36 @@ ** body of a trigger. */ SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep( - sqlite3 *db, /* The database connection */ + Parse *pParse, /* Parser */ Token *pTableName, /* Name of the table into which we insert */ IdList *pColumn, /* List of columns in pTableName to insert into */ Select *pSelect, /* A SELECT statement that supplies values */ - u8 orconf /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */ + u8 orconf, /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */ + Upsert *pUpsert, /* ON CONFLICT clauses for upsert */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ + sqlite3 *db = pParse->db; TriggerStep *pTriggerStep; assert(pSelect != 0 || db->mallocFailed); - pTriggerStep = triggerStepAllocate(db, TK_INSERT, pTableName); + pTriggerStep = triggerStepAllocate(pParse, TK_INSERT, pTableName,zStart,zEnd); if( pTriggerStep ){ - pTriggerStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); + if( IN_RENAME_OBJECT ){ + pTriggerStep->pSelect = pSelect; + pSelect = 0; + }else{ + pTriggerStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); + } pTriggerStep->pIdList = pColumn; + pTriggerStep->pUpsert = pUpsert; pTriggerStep->orconf = orconf; }else{ + testcase( pColumn ); sqlite3IdListDelete(db, pColumn); + testcase( pUpsert ); + sqlite3UpsertDelete(db, pUpsert); } sqlite3SelectDelete(db, pSelect); @@ -124090,18 +131204,28 @@ ** sees an UPDATE statement inside the body of a CREATE TRIGGER. */ SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep( - sqlite3 *db, /* The database connection */ + Parse *pParse, /* Parser */ Token *pTableName, /* Name of the table to be updated */ ExprList *pEList, /* The SET clause: list of column and new values */ Expr *pWhere, /* The WHERE clause */ - u8 orconf /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */ + u8 orconf, /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ + sqlite3 *db = pParse->db; TriggerStep *pTriggerStep; - pTriggerStep = triggerStepAllocate(db, TK_UPDATE, pTableName); + pTriggerStep = triggerStepAllocate(pParse, TK_UPDATE, pTableName,zStart,zEnd); if( pTriggerStep ){ - pTriggerStep->pExprList = sqlite3ExprListDup(db, pEList, EXPRDUP_REDUCE); - pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); + if( IN_RENAME_OBJECT ){ + pTriggerStep->pExprList = pEList; + pTriggerStep->pWhere = pWhere; + pEList = 0; + pWhere = 0; + }else{ + pTriggerStep->pExprList = sqlite3ExprListDup(db, pEList, EXPRDUP_REDUCE); + pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); + } pTriggerStep->orconf = orconf; } sqlite3ExprListDelete(db, pEList); @@ -124115,15 +131239,23 @@ ** sees a DELETE statement inside the body of a CREATE TRIGGER. */ SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep( - sqlite3 *db, /* Database connection */ + Parse *pParse, /* Parser */ Token *pTableName, /* The table from which rows are deleted */ - Expr *pWhere /* The WHERE clause */ + Expr *pWhere, /* The WHERE clause */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ + sqlite3 *db = pParse->db; TriggerStep *pTriggerStep; - pTriggerStep = triggerStepAllocate(db, TK_DELETE, pTableName); + pTriggerStep = triggerStepAllocate(pParse, TK_DELETE, pTableName,zStart,zEnd); if( pTriggerStep ){ - pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); + if( IN_RENAME_OBJECT ){ + pTriggerStep->pWhere = pWhere; + pWhere = 0; + }else{ + pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); + } pTriggerStep->orconf = OE_Default; } sqlite3ExprDelete(db, pWhere); @@ -124256,7 +131388,7 @@ *pp = (*pp)->pNext; } sqlite3DeleteTrigger(db, pTrigger); - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; } } @@ -124376,6 +131508,14 @@ pParse->eOrconf = (orconf==OE_Default)?pStep->orconf:(u8)orconf; assert( pParse->okConstFactor==0 ); +#ifndef SQLITE_OMIT_TRACE + if( pStep->zSpan ){ + sqlite3VdbeAddOp4(v, OP_Trace, 0x7fffffff, 1, 0, + sqlite3MPrintf(db, "-- %s", pStep->zSpan), + P4_DYNAMIC); + } +#endif + switch( pStep->op ){ case TK_UPDATE: { sqlite3Update(pParse, @@ -124382,7 +131522,7 @@ targetSrcList(pParse, pStep), sqlite3ExprListDup(db, pStep->pExprList, 0), sqlite3ExprDup(db, pStep->pWhere, 0), - pParse->eOrconf + pParse->eOrconf, 0, 0, 0 ); break; } @@ -124391,7 +131531,8 @@ targetSrcList(pParse, pStep), sqlite3SelectDup(db, pStep->pSelect, 0), sqlite3IdListDup(db, pStep->pIdList), - pParse->eOrconf + pParse->eOrconf, + sqlite3UpsertDup(db, pStep->pUpsert) ); break; } @@ -124398,7 +131539,7 @@ case TK_DELETE: { sqlite3DeleteFrom(pParse, targetSrcList(pParse, pStep), - sqlite3ExprDup(db, pStep->pWhere, 0) + sqlite3ExprDup(db, pStep->pWhere, 0), 0, 0 ); break; } @@ -124516,9 +131657,11 @@ pTab->zName )); #ifndef SQLITE_OMIT_TRACE - sqlite3VdbeChangeP4(v, -1, - sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC - ); + if( pTrigger->zName ){ + sqlite3VdbeChangeP4(v, -1, + sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC + ); + } #endif /* If one was specified, code the WHEN clause. If it evaluates to false @@ -124546,7 +131689,7 @@ VdbeComment((v, "End: %s.%s", pTrigger->zName, onErrorText(orconf))); transferParseError(pParse, pSubParse); - if( db->mallocFailed==0 ){ + if( db->mallocFailed==0 && pParse->nErr==0 ){ pProgram->aOp = sqlite3VdbeTakeOpArray(v, &pProgram->nOp, &pTop->nMaxArg); } pProgram->nMem = pSubParse->nMem; @@ -124854,6 +131997,57 @@ } /* +** Check to see if column iCol of index pIdx references any of the +** columns defined by aXRef and chngRowid. Return true if it does +** and false if not. This is an optimization. False-positives are a +** performance degradation, but false-negatives can result in a corrupt +** index and incorrect answers. +** +** aXRef[j] will be non-negative if column j of the original table is +** being updated. chngRowid will be true if the rowid of the table is +** being updated. +*/ +static int indexColumnIsBeingUpdated( + Index *pIdx, /* The index to check */ + int iCol, /* Which column of the index to check */ + int *aXRef, /* aXRef[j]>=0 if column j is being updated */ + int chngRowid /* true if the rowid is being updated */ +){ + i16 iIdxCol = pIdx->aiColumn[iCol]; + assert( iIdxCol!=XN_ROWID ); /* Cannot index rowid */ + if( iIdxCol>=0 ){ + return aXRef[iIdxCol]>=0; + } + assert( iIdxCol==XN_EXPR ); + assert( pIdx->aColExpr!=0 ); + assert( pIdx->aColExpr->a[iCol].pExpr!=0 ); + return sqlite3ExprReferencesUpdatedColumn(pIdx->aColExpr->a[iCol].pExpr, + aXRef,chngRowid); +} + +/* +** Check to see if index pIdx is a partial index whose conditional +** expression might change values due to an UPDATE. Return true if +** the index is subject to change and false if the index is guaranteed +** to be unchanged. This is an optimization. False-positives are a +** performance degradation, but false-negatives can result in a corrupt +** index and incorrect answers. +** +** aXRef[j] will be non-negative if column j of the original table is +** being updated. chngRowid will be true if the rowid of the table is +** being updated. +*/ +static int indexWhereClauseMightChange( + Index *pIdx, /* The index to check */ + int *aXRef, /* aXRef[j]>=0 if column j is being updated */ + int chngRowid /* true if the rowid is being updated */ +){ + if( pIdx->pPartIdxWhere==0 ) return 0; + return sqlite3ExprReferencesUpdatedColumn(pIdx->pPartIdxWhere, + aXRef, chngRowid); +} + +/* ** Process an UPDATE statement. ** ** UPDATE OR IGNORE table_wxyz SET a=b, c=d WHERE e<5 AND f NOT NULL; @@ -124865,7 +132059,10 @@ SrcList *pTabList, /* The table in which we should change things */ ExprList *pChanges, /* Things to be changed */ Expr *pWhere, /* The WHERE clause. May be null */ - int onError /* How to handle constraint errors */ + int onError, /* How to handle constraint errors */ + ExprList *pOrderBy, /* ORDER BY clause. May be null */ + Expr *pLimit, /* LIMIT clause. May be null */ + Upsert *pUpsert /* ON CONFLICT clause, or null */ ){ int i, j; /* Loop counters */ Table *pTab; /* The table to be updated */ @@ -124950,6 +132147,16 @@ # define isView 0 #endif +#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT + if( !isView ){ + pWhere = sqlite3LimitWhere( + pParse, pTabList, pWhere, pOrderBy, pLimit, "UPDATE" + ); + pOrderBy = 0; + pLimit = 0; + } +#endif + if( sqlite3ViewGetColumnNames(pParse, pTab) ){ goto update_cleanup; } @@ -124962,16 +132169,23 @@ ** need to occur right after the database cursor. So go ahead and ** allocate enough space, just in case. */ - pTabList->a[0].iCursor = iBaseCur = iDataCur = pParse->nTab++; + iBaseCur = iDataCur = pParse->nTab++; iIdxCur = iDataCur+1; pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); + testcase( pPk!=0 && pPk!=pTab->pIndex ); for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ - if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){ + if( pPk==pIdx ){ iDataCur = pParse->nTab; - pTabList->a[0].iCursor = iDataCur; } pParse->nTab++; } + if( pUpsert ){ + /* On an UPSERT, reuse the same cursors already opened by INSERT */ + iDataCur = pUpsert->iDataCur; + iIdxCur = pUpsert->iIdxCur; + pParse->nTab = iBaseCur; + } + pTabList->a[0].iCursor = iDataCur; /* Allocate space for aXRef[], aRegIdx[], and aToOpen[]. ** Initialize aXRef[] and aToOpen[] to their default values. @@ -124988,6 +132202,8 @@ memset(&sNC, 0, sizeof(sNC)); sNC.pParse = pParse; sNC.pSrcList = pTabList; + sNC.uNC.pUpsert = pUpsert; + sNC.ncFlags = NC_UUpsert; /* Resolve the column names in all the expressions of the ** of the UPDATE statement. Also find the column index @@ -125054,19 +132270,18 @@ /* There is one entry in the aRegIdx[] array for each index on the table ** being updated. Fill in aRegIdx[] with a register number that will hold ** the key for accessing each index. - ** - ** FIXME: Be smarter about omitting indexes that use expressions. */ for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ int reg; - if( chngKey || hasFK>1 || pIdx->pPartIdxWhere || pIdx==pPk ){ + if( chngKey || hasFK>1 || pIdx==pPk + || indexWhereClauseMightChange(pIdx,aXRef,chngRowid) + ){ reg = ++pParse->nMem; pParse->nMem += pIdx->nColumn; }else{ reg = 0; for(i=0; inKeyCol; i++){ - i16 iIdxCol = pIdx->aiColumn[i]; - if( iIdxCol<0 || aXRef[iIdxCol]>=0 ){ + if( indexColumnIsBeingUpdated(pIdx, i, aXRef, chngRowid) ){ reg = ++pParse->nMem; pParse->nMem += pIdx->nColumn; if( (onError==OE_Replace) @@ -125091,7 +132306,7 @@ v = sqlite3GetVdbe(pParse); if( v==0 ) goto update_cleanup; if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); - sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3BeginWriteOperation(pParse, pTrigger || hasFK, iDb); /* Allocate required registers. */ if( !IsVirtual(pTab) ){ @@ -125118,7 +132333,11 @@ */ #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) if( isView ){ - sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur); + sqlite3MaterializeView(pParse, pTab, + pWhere, pOrderBy, pLimit, iDataCur + ); + pOrderBy = 0; + pLimit = 0; } #endif @@ -125138,8 +132357,16 @@ } #endif - /* Initialize the count of updated rows */ - if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){ + /* Jump to labelBreak to abandon further processing of this UPDATE */ + labelContinue = labelBreak = sqlite3VdbeMakeLabel(v); + + /* Not an UPSERT. Normal processing. Begin by + ** initialize the count of updated rows */ + if( (db->flags&SQLITE_CountRows)!=0 + && !pParse->pTriggerTab + && !pParse->nested + && pUpsert==0 + ){ regRowCount = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); } @@ -125152,46 +132379,61 @@ iPk = pParse->nMem+1; pParse->nMem += nPk; regKey = ++pParse->nMem; - iEph = pParse->nTab++; - - sqlite3VdbeAddOp2(v, OP_Null, 0, iPk); - addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk); - sqlite3VdbeSetP4KeyInfo(pParse, pPk); + if( pUpsert==0 ){ + iEph = pParse->nTab++; + sqlite3VdbeAddOp3(v, OP_Null, 0, iPk, iPk+nPk-1); + addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk); + sqlite3VdbeSetP4KeyInfo(pParse, pPk); + } } - - /* Begin the database scan. - ** - ** Do not consider a single-pass strategy for a multi-row update if - ** there are any triggers or foreign keys to process, or rows may - ** be deleted as a result of REPLACE conflict handling. Any of these - ** things might disturb a cursor being used to scan through the table - ** or index, causing a single-pass approach to malfunction. */ - flags = WHERE_ONEPASS_DESIRED|WHERE_SEEK_UNIQ_TABLE; - if( !pParse->nested && !pTrigger && !hasFK && !chngKey && !bReplace ){ - flags |= WHERE_ONEPASS_MULTIROW; + + if( pUpsert ){ + /* If this is an UPSERT, then all cursors have already been opened by + ** the outer INSERT and the data cursor should be pointing at the row + ** that is to be updated. So bypass the code that searches for the + ** row(s) to be updated. + */ + pWInfo = 0; + eOnePass = ONEPASS_SINGLE; + sqlite3ExprIfFalse(pParse, pWhere, labelBreak, SQLITE_JUMPIFNULL); + }else{ + /* Begin the database scan. + ** + ** Do not consider a single-pass strategy for a multi-row update if + ** there are any triggers or foreign keys to process, or rows may + ** be deleted as a result of REPLACE conflict handling. Any of these + ** things might disturb a cursor being used to scan through the table + ** or index, causing a single-pass approach to malfunction. */ + flags = WHERE_ONEPASS_DESIRED|WHERE_SEEK_UNIQ_TABLE; + if( !pParse->nested && !pTrigger && !hasFK && !chngKey && !bReplace ){ + flags |= WHERE_ONEPASS_MULTIROW; + } + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, flags, iIdxCur); + if( pWInfo==0 ) goto update_cleanup; + + /* A one-pass strategy that might update more than one row may not + ** be used if any column of the index used for the scan is being + ** updated. Otherwise, if there is an index on "b", statements like + ** the following could create an infinite loop: + ** + ** UPDATE t1 SET b=b+1 WHERE b>? + ** + ** Fall back to ONEPASS_OFF if where.c has selected a ONEPASS_MULTI + ** strategy that uses an index for which one or more columns are being + ** updated. */ + eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); + if( eOnePass!=ONEPASS_SINGLE ){ + sqlite3MultiWrite(pParse); + if( eOnePass==ONEPASS_MULTI ){ + int iCur = aiCurOnePass[1]; + if( iCur>=0 && iCur!=iDataCur && aToOpen[iCur-iBaseCur] ){ + eOnePass = ONEPASS_OFF; + } + assert( iCur!=iDataCur || !HasRowid(pTab) ); + } + } } - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, flags, iIdxCur); - if( pWInfo==0 ) goto update_cleanup; - /* A one-pass strategy that might update more than one row may not - ** be used if any column of the index used for the scan is being - ** updated. Otherwise, if there is an index on "b", statements like - ** the following could create an infinite loop: - ** - ** UPDATE t1 SET b=b+1 WHERE b>? - ** - ** Fall back to ONEPASS_OFF if where.c has selected a ONEPASS_MULTI - ** strategy that uses an index for which one or more columns are being - ** updated. */ - eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); - if( eOnePass==ONEPASS_MULTI ){ - int iCur = aiCurOnePass[1]; - if( iCur>=0 && iCur!=iDataCur && aToOpen[iCur-iBaseCur] ){ - eOnePass = ONEPASS_OFF; - } - assert( iCur!=iDataCur || !HasRowid(pTab) ); - } - if( HasRowid(pTab) ){ /* Read the rowid of the current row of the WHERE scan. In ONEPASS_OFF ** mode, write the rowid into the FIFO. In either of the one-pass modes, @@ -125211,7 +132453,7 @@ sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur,pPk->aiColumn[i],iPk+i); } if( eOnePass ){ - sqlite3VdbeChangeToNoop(v, addrOpen); + if( addrOpen ) sqlite3VdbeChangeToNoop(v, addrOpen); nKey = nPk; regKey = iPk; }else{ @@ -125221,59 +132463,58 @@ } } - if( eOnePass!=ONEPASS_MULTI ){ - sqlite3WhereEnd(pWInfo); - } - - labelBreak = sqlite3VdbeMakeLabel(v); - if( !isView ){ - int addrOnce = 0; - - /* Open every index that needs updating. */ - if( eOnePass!=ONEPASS_OFF ){ - if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0; - if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0; + if( pUpsert==0 ){ + if( eOnePass!=ONEPASS_MULTI ){ + sqlite3WhereEnd(pWInfo); } - - if( eOnePass==ONEPASS_MULTI && (nIdx-(aiCurOnePass[1]>=0))>0 ){ - addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); + + if( !isView ){ + int addrOnce = 0; + + /* Open every index that needs updating. */ + if( eOnePass!=ONEPASS_OFF ){ + if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0; + if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0; + } + + if( eOnePass==ONEPASS_MULTI && (nIdx-(aiCurOnePass[1]>=0))>0 ){ + addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); + } + sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, + aToOpen, 0, 0); + if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); } - sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, aToOpen, - 0, 0); - if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); - } - - /* Top of the update loop */ - if( eOnePass!=ONEPASS_OFF ){ - if( !isView && aiCurOnePass[0]!=iDataCur && aiCurOnePass[1]!=iDataCur ){ - assert( pPk ); - sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey); - VdbeCoverageNeverTaken(v); - } - if( eOnePass==ONEPASS_SINGLE ){ - labelContinue = labelBreak; + + /* Top of the update loop */ + if( eOnePass!=ONEPASS_OFF ){ + if( !isView && aiCurOnePass[0]!=iDataCur && aiCurOnePass[1]!=iDataCur ){ + assert( pPk ); + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey,nKey); + VdbeCoverage(v); + } + if( eOnePass!=ONEPASS_SINGLE ){ + labelContinue = sqlite3VdbeMakeLabel(v); + } + sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak); + VdbeCoverageIf(v, pPk==0); + VdbeCoverageIf(v, pPk!=0); + }else if( pPk ){ + labelContinue = sqlite3VdbeMakeLabel(v); + sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); + addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey); + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0); + VdbeCoverage(v); }else{ - labelContinue = sqlite3VdbeMakeLabel(v); + labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet,labelBreak, + regOldRowid); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); + VdbeCoverage(v); } - sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak); - VdbeCoverageIf(v, pPk==0); - VdbeCoverageIf(v, pPk!=0); - }else if( pPk ){ - labelContinue = sqlite3VdbeMakeLabel(v); - sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); - addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey); - sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0); - VdbeCoverage(v); - }else{ - labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, labelBreak, - regOldRowid); - VdbeCoverage(v); - sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); - VdbeCoverage(v); } - /* If the record number will change, set register regNewRowid to - ** contain the new value. If the record number is not being modified, + /* If the rowid value will change, set register regNewRowid to + ** contain the new value. If the rowid is not being modified, ** then regNewRowid is the same register as regOldRowid, which is ** already populated. */ assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid ); @@ -125336,7 +132577,7 @@ */ testcase( i==31 ); testcase( i==32 ); - sqlite3ExprCodeGetColumnToReg(pParse, pTab, i, iDataCur, regNew+i); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, i, regNew+i); }else{ sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); } @@ -125365,10 +132606,14 @@ VdbeCoverage(v); } - /* If it did not delete it, the row-trigger may still have modified + /* After-BEFORE-trigger-reload-loop: + ** If it did not delete it, the BEFORE trigger may still have modified ** some of the columns of the row being updated. Load the values for - ** all columns not modified by the update statement into their - ** registers in case this has happened. + ** all columns not modified by the update statement into their registers + ** in case this has happened. Only unmodified columns are reloaded. + ** The values computed for modified columns use the values before the + ** BEFORE trigger runs. See test case trigger1-18.0 (added 2018-04-26) + ** for an example. */ for(i=0; inCol; i++){ if( aXRef[i]<0 && i!=pTab->iPKey ){ @@ -125384,7 +132629,7 @@ assert( regOldRowid>0 ); sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace, - aXRef); + aXRef, 0); /* Do FK constraint checks. */ if( hasFK ){ @@ -125454,7 +132699,7 @@ /* Increment the row counter */ - if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); } @@ -125481,16 +132726,15 @@ ** maximum rowid counter values recorded while inserting into ** autoincrement tables. */ - if( pParse->nested==0 && pParse->pTriggerTab==0 ){ + if( pParse->nested==0 && pParse->pTriggerTab==0 && pUpsert==0 ){ sqlite3AutoincrementEnd(pParse); } /* - ** Return the number of rows that were changed. If this routine is - ** generating code because of a call to sqlite3NestedParse(), do not - ** invoke the callback function. + ** Return the number of rows that were changed, if we are tracking + ** that information. */ - if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); sqlite3VdbeSetNumCols(v, 1); sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC); @@ -125502,6 +132746,10 @@ sqlite3SrcListDelete(db, pTabList); sqlite3ExprListDelete(db, pChanges); sqlite3ExprDelete(db, pWhere); +#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) + sqlite3ExprListDelete(db, pOrderBy); + sqlite3ExprDelete(db, pLimit); +#endif return; } /* Make sure "isView" and other macros defined above are undefined. Otherwise @@ -125558,10 +132806,10 @@ int regRowid; /* Register for ephem table rowid */ int iCsr = pSrc->a[0].iCursor; /* Cursor used for virtual table scan */ int aDummy[2]; /* Unused arg for sqlite3WhereOkOnePass() */ - int bOnePass; /* True to use onepass strategy */ + int eOnePass; /* True to use onepass strategy */ int addr; /* Address of OP_OpenEphemeral */ - /* Allocate nArg registers to martial the arguments to VUpdate. Then + /* Allocate nArg registers in which to gather the arguments for VUpdate. Then ** create and open the ephemeral table in which the records created from ** these arguments will be temporarily stored. */ assert( v ); @@ -125577,40 +132825,58 @@ if( pWInfo==0 ) return; /* Populate the argument registers. */ - sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg); - if( pRowid ){ - sqlite3ExprCode(pParse, pRowid, regArg+1); - }else{ - sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1); - } for(i=0; inCol; i++){ if( aXRef[i]>=0 ){ sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i); }else{ sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, i, regArg+2+i); + sqlite3VdbeChangeP5(v, OPFLAG_NOCHNG);/* Enable sqlite3_vtab_nochange() */ } } + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg); + if( pRowid ){ + sqlite3ExprCode(pParse, pRowid, regArg+1); + }else{ + sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1); + } + }else{ + Index *pPk; /* PRIMARY KEY index */ + i16 iPk; /* PRIMARY KEY column */ + pPk = sqlite3PrimaryKeyIndex(pTab); + assert( pPk!=0 ); + assert( pPk->nKeyCol==1 ); + iPk = pPk->aiColumn[0]; + sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, iPk, regArg); + sqlite3VdbeAddOp2(v, OP_SCopy, regArg+2+iPk, regArg+1); + } - bOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy); + eOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy); - if( bOnePass ){ + /* There is no ONEPASS_MULTI on virtual tables */ + assert( eOnePass==ONEPASS_OFF || eOnePass==ONEPASS_SINGLE ); + + if( eOnePass ){ /* If using the onepass strategy, no-op out the OP_OpenEphemeral coded - ** above. Also, if this is a top-level parse (not a trigger), clear the - ** multi-write flag so that the VM does not open a statement journal */ + ** above. */ sqlite3VdbeChangeToNoop(v, addr); - if( sqlite3IsToplevel(pParse) ){ - pParse->isMultiWrite = 0; - } + sqlite3VdbeAddOp1(v, OP_Close, iCsr); }else{ /* Create a record from the argument register contents and insert it into ** the ephemeral table. */ + sqlite3MultiWrite(pParse); sqlite3VdbeAddOp3(v, OP_MakeRecord, regArg, nArg, regRec); +#ifdef SQLITE_DEBUG + /* Signal an assert() within OP_MakeRecord that it is allowed to + ** accept no-change records with serial_type 10 */ + sqlite3VdbeChangeP5(v, OPFLAG_NOCHNG_MAGIC); +#endif sqlite3VdbeAddOp2(v, OP_NewRowid, ephemTab, regRowid); sqlite3VdbeAddOp3(v, OP_Insert, ephemTab, regRec, regRowid); } - if( bOnePass==0 ){ + if( eOnePass==ONEPASS_OFF ){ /* End the virtual table scan */ sqlite3WhereEnd(pWInfo); @@ -125630,7 +132896,7 @@ /* End of the ephemeral table scan. Or, if using the onepass strategy, ** jump to here if the scan visited zero rows. */ - if( bOnePass==0 ){ + if( eOnePass==ONEPASS_OFF ){ sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1); VdbeCoverage(v); sqlite3VdbeJumpHere(v, addr); sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0); @@ -125641,6 +132907,261 @@ #endif /* SQLITE_OMIT_VIRTUALTABLE */ /************** End of update.c **********************************************/ +/************** Begin file upsert.c ******************************************/ +/* +** 2018-04-12 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code to implement various aspects of UPSERT +** processing and handling of the Upsert object. +*/ +/* #include "sqliteInt.h" */ + +#ifndef SQLITE_OMIT_UPSERT +/* +** Free a list of Upsert objects +*/ +SQLITE_PRIVATE void sqlite3UpsertDelete(sqlite3 *db, Upsert *p){ + if( p ){ + sqlite3ExprListDelete(db, p->pUpsertTarget); + sqlite3ExprDelete(db, p->pUpsertTargetWhere); + sqlite3ExprListDelete(db, p->pUpsertSet); + sqlite3ExprDelete(db, p->pUpsertWhere); + sqlite3DbFree(db, p); + } +} + +/* +** Duplicate an Upsert object. +*/ +SQLITE_PRIVATE Upsert *sqlite3UpsertDup(sqlite3 *db, Upsert *p){ + if( p==0 ) return 0; + return sqlite3UpsertNew(db, + sqlite3ExprListDup(db, p->pUpsertTarget, 0), + sqlite3ExprDup(db, p->pUpsertTargetWhere, 0), + sqlite3ExprListDup(db, p->pUpsertSet, 0), + sqlite3ExprDup(db, p->pUpsertWhere, 0) + ); +} + +/* +** Create a new Upsert object. +*/ +SQLITE_PRIVATE Upsert *sqlite3UpsertNew( + sqlite3 *db, /* Determines which memory allocator to use */ + ExprList *pTarget, /* Target argument to ON CONFLICT, or NULL */ + Expr *pTargetWhere, /* Optional WHERE clause on the target */ + ExprList *pSet, /* UPDATE columns, or NULL for a DO NOTHING */ + Expr *pWhere /* WHERE clause for the ON CONFLICT UPDATE */ +){ + Upsert *pNew; + pNew = sqlite3DbMallocRaw(db, sizeof(Upsert)); + if( pNew==0 ){ + sqlite3ExprListDelete(db, pTarget); + sqlite3ExprDelete(db, pTargetWhere); + sqlite3ExprListDelete(db, pSet); + sqlite3ExprDelete(db, pWhere); + return 0; + }else{ + pNew->pUpsertTarget = pTarget; + pNew->pUpsertTargetWhere = pTargetWhere; + pNew->pUpsertSet = pSet; + pNew->pUpsertWhere = pWhere; + pNew->pUpsertIdx = 0; + } + return pNew; +} + +/* +** Analyze the ON CONFLICT clause described by pUpsert. Resolve all +** symbols in the conflict-target. +** +** Return SQLITE_OK if everything works, or an error code is something +** is wrong. +*/ +SQLITE_PRIVATE int sqlite3UpsertAnalyzeTarget( + Parse *pParse, /* The parsing context */ + SrcList *pTabList, /* Table into which we are inserting */ + Upsert *pUpsert /* The ON CONFLICT clauses */ +){ + Table *pTab; /* That table into which we are inserting */ + int rc; /* Result code */ + int iCursor; /* Cursor used by pTab */ + Index *pIdx; /* One of the indexes of pTab */ + ExprList *pTarget; /* The conflict-target clause */ + Expr *pTerm; /* One term of the conflict-target clause */ + NameContext sNC; /* Context for resolving symbolic names */ + Expr sCol[2]; /* Index column converted into an Expr */ + + assert( pTabList->nSrc==1 ); + assert( pTabList->a[0].pTab!=0 ); + assert( pUpsert!=0 ); + assert( pUpsert->pUpsertTarget!=0 ); + + /* Resolve all symbolic names in the conflict-target clause, which + ** includes both the list of columns and the optional partial-index + ** WHERE clause. + */ + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + sNC.pSrcList = pTabList; + rc = sqlite3ResolveExprListNames(&sNC, pUpsert->pUpsertTarget); + if( rc ) return rc; + rc = sqlite3ResolveExprNames(&sNC, pUpsert->pUpsertTargetWhere); + if( rc ) return rc; + + /* Check to see if the conflict target matches the rowid. */ + pTab = pTabList->a[0].pTab; + pTarget = pUpsert->pUpsertTarget; + iCursor = pTabList->a[0].iCursor; + if( HasRowid(pTab) + && pTarget->nExpr==1 + && (pTerm = pTarget->a[0].pExpr)->op==TK_COLUMN + && pTerm->iColumn==XN_ROWID + ){ + /* The conflict-target is the rowid of the primary table */ + assert( pUpsert->pUpsertIdx==0 ); + return SQLITE_OK; + } + + /* Initialize sCol[0..1] to be an expression parse tree for a + ** single column of an index. The sCol[0] node will be the TK_COLLATE + ** operator and sCol[1] will be the TK_COLUMN operator. Code below + ** will populate the specific collation and column number values + ** prior to comparing against the conflict-target expression. + */ + memset(sCol, 0, sizeof(sCol)); + sCol[0].op = TK_COLLATE; + sCol[0].pLeft = &sCol[1]; + sCol[1].op = TK_COLUMN; + sCol[1].iTable = pTabList->a[0].iCursor; + + /* Check for matches against other indexes */ + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + int ii, jj, nn; + if( !IsUniqueIndex(pIdx) ) continue; + if( pTarget->nExpr!=pIdx->nKeyCol ) continue; + if( pIdx->pPartIdxWhere ){ + if( pUpsert->pUpsertTargetWhere==0 ) continue; + if( sqlite3ExprCompare(pParse, pUpsert->pUpsertTargetWhere, + pIdx->pPartIdxWhere, iCursor)!=0 ){ + continue; + } + } + nn = pIdx->nKeyCol; + for(ii=0; iiazColl[ii]; + if( pIdx->aiColumn[ii]==XN_EXPR ){ + assert( pIdx->aColExpr!=0 ); + assert( pIdx->aColExpr->nExpr>ii ); + pExpr = pIdx->aColExpr->a[ii].pExpr; + if( pExpr->op!=TK_COLLATE ){ + sCol[0].pLeft = pExpr; + pExpr = &sCol[0]; + } + }else{ + sCol[0].pLeft = &sCol[1]; + sCol[1].iColumn = pIdx->aiColumn[ii]; + pExpr = &sCol[0]; + } + for(jj=0; jja[jj].pExpr, pExpr,iCursor)<2 ){ + break; /* Column ii of the index matches column jj of target */ + } + } + if( jj>=nn ){ + /* The target contains no match for column jj of the index */ + break; + } + } + if( iipUpsertIdx = pIdx; + return SQLITE_OK; + } + sqlite3ErrorMsg(pParse, "ON CONFLICT clause does not match any " + "PRIMARY KEY or UNIQUE constraint"); + return SQLITE_ERROR; +} + +/* +** Generate bytecode that does an UPDATE as part of an upsert. +** +** If pIdx is NULL, then the UNIQUE constraint that failed was the IPK. +** In this case parameter iCur is a cursor open on the table b-tree that +** currently points to the conflicting table row. Otherwise, if pIdx +** is not NULL, then pIdx is the constraint that failed and iCur is a +** cursor points to the conflicting row. +*/ +SQLITE_PRIVATE void sqlite3UpsertDoUpdate( + Parse *pParse, /* The parsing and code-generating context */ + Upsert *pUpsert, /* The ON CONFLICT clause for the upsert */ + Table *pTab, /* The table being updated */ + Index *pIdx, /* The UNIQUE constraint that failed */ + int iCur /* Cursor for pIdx (or pTab if pIdx==NULL) */ +){ + Vdbe *v = pParse->pVdbe; + sqlite3 *db = pParse->db; + SrcList *pSrc; /* FROM clause for the UPDATE */ + int iDataCur; + + assert( v!=0 ); + assert( pUpsert!=0 ); + VdbeNoopComment((v, "Begin DO UPDATE of UPSERT")); + iDataCur = pUpsert->iDataCur; + if( pIdx && iCur!=iDataCur ){ + if( HasRowid(pTab) ){ + int regRowid = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp2(v, OP_IdxRowid, iCur, regRowid); + sqlite3VdbeAddOp3(v, OP_SeekRowid, iDataCur, 0, regRowid); + VdbeCoverage(v); + sqlite3ReleaseTempReg(pParse, regRowid); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + int nPk = pPk->nKeyCol; + int iPk = pParse->nMem+1; + int i; + pParse->nMem += nPk; + for(i=0; iaiColumn[i]>=0 ); + k = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[i]); + sqlite3VdbeAddOp3(v, OP_Column, iCur, k, iPk+i); + VdbeComment((v, "%s.%s", pIdx->zName, + pTab->aCol[pPk->aiColumn[i]].zName)); + } + sqlite3VdbeVerifyAbortable(v, OE_Abort); + i = sqlite3VdbeAddOp4Int(v, OP_Found, iDataCur, 0, iPk, nPk); + VdbeCoverage(v); + sqlite3VdbeAddOp4(v, OP_Halt, SQLITE_CORRUPT, OE_Abort, 0, + "corrupt database", P4_STATIC); + sqlite3VdbeJumpHere(v, i); + } + } + /* pUpsert does not own pUpsertSrc - the outer INSERT statement does. So + ** we have to make a copy before passing it down into sqlite3Update() */ + pSrc = sqlite3SrcListDup(db, pUpsert->pUpsertSrc, 0); + sqlite3Update(pParse, pSrc, pUpsert->pUpsertSet, + pUpsert->pUpsertWhere, OE_Abort, 0, 0, pUpsert); + pUpsert->pUpsertSet = 0; /* Will have been deleted by sqlite3Update() */ + pUpsert->pUpsertWhere = 0; /* Will have been deleted by sqlite3Update() */ + VdbeNoopComment((v, "End DO UPDATE of UPSERT")); +} + +#endif /* SQLITE_OMIT_UPSERT */ + +/************** End of upsert.c **********************************************/ /************** Begin file vacuum.c ******************************************/ /* ** 2003 April 6 @@ -125683,8 +133204,14 @@ while( SQLITE_ROW==(rc = sqlite3_step(pStmt)) ){ const char *zSubSql = (const char*)sqlite3_column_text(pStmt,0); assert( sqlite3_strnicmp(zSql,"SELECT",6)==0 ); - if( zSubSql ){ - assert( zSubSql[0]!='S' ); + /* The secondary SQL must be one of CREATE TABLE, CREATE INDEX, + ** or INSERT. Historically there have been attacks that first + ** corrupt the sqlite_master.sql field with other kinds of statements + ** then run VACUUM to get those statements to execute at inappropriate + ** times. */ + if( zSubSql + && (strncmp(zSubSql,"CRE",3)==0 || strncmp(zSubSql,"INS",3)==0) + ){ rc = execSql(db, pzErrMsg, zSubSql); if( rc!=SQLITE_OK ) break; } @@ -125774,7 +133301,8 @@ int rc = SQLITE_OK; /* Return code from service routines */ Btree *pMain; /* The database being vacuumed */ Btree *pTemp; /* The temporary database we vacuum into */ - int saved_flags; /* Saved value of the db->flags */ + u16 saved_mDbFlags; /* Saved value of db->mDbFlags */ + u32 saved_flags; /* Saved value of db->flags */ int saved_nChange; /* Saved value of db->nChange */ int saved_nTotalChange; /* Saved value of db->nTotalChange */ u8 saved_mTrace; /* Saved trace settings */ @@ -125797,12 +133325,14 @@ ** restored before returning. Then set the writable-schema flag, and ** disable CHECK and foreign key constraints. */ saved_flags = db->flags; + saved_mDbFlags = db->mDbFlags; saved_nChange = db->nChange; saved_nTotalChange = db->nTotalChange; saved_mTrace = db->mTrace; - db->flags |= (SQLITE_WriteSchema | SQLITE_IgnoreChecks - | SQLITE_PreferBuiltin | SQLITE_Vacuum); - db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder | SQLITE_CountRows); + db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks; + db->mDbFlags |= DBFLAG_PreferBuiltin | DBFLAG_Vacuum; + db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder + | SQLITE_Defensive | SQLITE_CountRows); db->mTrace = 0; zDbMain = db->aDb[iDb].zDbSName; @@ -125860,7 +133390,7 @@ */ rc = execSql(db, pzErrMsg, "BEGIN"); if( rc!=SQLITE_OK ) goto end_of_vacuum; - rc = sqlite3BtreeBeginTrans(pMain, 2); + rc = sqlite3BtreeBeginTrans(pMain, 2, 0); if( rc!=SQLITE_OK ) goto end_of_vacuum; /* Do not attempt to change the page size for a WAL database */ @@ -125895,7 +133425,7 @@ if( rc!=SQLITE_OK ) goto end_of_vacuum; rc = execSqlF(db, pzErrMsg, "SELECT sql FROM \"%w\".sqlite_master" - " WHERE type='index' AND length(sql)>10", + " WHERE type='index'", zDbMain ); if( rc!=SQLITE_OK ) goto end_of_vacuum; @@ -125912,8 +133442,8 @@ "WHERE type='table'AND coalesce(rootpage,1)>0", zDbMain ); - assert( (db->flags & SQLITE_Vacuum)!=0 ); - db->flags &= ~SQLITE_Vacuum; + assert( (db->mDbFlags & DBFLAG_Vacuum)!=0 ); + db->mDbFlags &= ~DBFLAG_Vacuum; if( rc!=SQLITE_OK ) goto end_of_vacuum; /* Copy the triggers, views, and virtual tables from the main database @@ -125981,6 +133511,7 @@ end_of_vacuum: /* Restore the original value of db->flags */ db->init.iDb = 0; + db->mDbFlags = saved_mDbFlags; db->flags = saved_flags; db->nChange = saved_nChange; db->nTotalChange = saved_nTotalChange; @@ -126057,8 +133588,10 @@ ){ Module *pMod; int nName = sqlite3Strlen30(zName); - pMod = (Module *)sqlite3DbMallocRawNN(db, sizeof(Module) + nName + 1); - if( pMod ){ + pMod = (Module *)sqlite3Malloc(sizeof(Module) + nName + 1); + if( pMod==0 ){ + sqlite3OomFault(db); + }else{ Module *pDel; char *zCopy = (char *)(&pMod[1]); memcpy(zCopy, zName, nName+1); @@ -126275,7 +133808,7 @@ assert( sqlite3_mutex_held(db->mutex) ); if( p ){ - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, 0); do { VTable *pNext = p->pNext; sqlite3VtabUnlock(p); @@ -126341,7 +133874,6 @@ Token *pModuleName, /* Name of the module for the virtual table */ int ifNotExists /* No error if the table already exists */ ){ - int iDb; /* The database the table is being created in */ Table *pTable; /* The new virtual table */ sqlite3 *db; /* Database connection */ @@ -126351,8 +133883,6 @@ assert( 0==pTable->pIndex ); db = pParse->db; - iDb = sqlite3SchemaToIndex(db, pTable->pSchema); - assert( iDb>=0 ); assert( pTable->nModuleArg==0 ); addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName)); @@ -126372,6 +133902,8 @@ ** The second call, to obtain permission to create the table, is made now. */ if( pTable->azModuleArg ){ + int iDb = sqlite3SchemaToIndex(db, pTable->pSchema); + assert( iDb>=0 ); /* The database the table is being created in */ sqlite3AuthCheck(pParse, SQLITE_CREATE_VTABLE, pTable->zName, pTable->azModuleArg[0], pParse->db->aDb[iDb].zDbSName); } @@ -126533,13 +134065,14 @@ } } - zModuleName = sqlite3MPrintf(db, "%s", pTab->zName); + zModuleName = sqlite3DbStrDup(db, pTab->zName); if( !zModuleName ){ return SQLITE_NOMEM_BKPT; } - pVTable = sqlite3DbMallocZero(db, sizeof(VTable)); + pVTable = sqlite3MallocZero(sizeof(VTable)); if( !pVTable ){ + sqlite3OomFault(db); sqlite3DbFree(db, zModuleName); return SQLITE_NOMEM_BKPT; } @@ -126659,6 +134192,7 @@ rc = vtabCallConstructor(db, pTab, pMod, pMod->pModule->xConnect, &zErr); if( rc!=SQLITE_OK ){ sqlite3ErrorMsg(pParse, "%s", zErr); + pParse->rc = rc; } sqlite3DbFree(db, zErr); } @@ -126748,10 +134282,10 @@ */ SQLITE_API int sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){ VtabCtx *pCtx; - Parse *pParse; int rc = SQLITE_OK; Table *pTab; char *zErr = 0; + Parse sParse; #ifdef SQLITE_ENABLE_API_ARMOR if( !sqlite3SafetyCheckOk(db) || zCreateTable==0 ){ @@ -126768,56 +134302,56 @@ pTab = pCtx->pTab; assert( IsVirtual(pTab) ); - pParse = sqlite3StackAllocZero(db, sizeof(*pParse)); - if( pParse==0 ){ - rc = SQLITE_NOMEM_BKPT; - }else{ - pParse->declareVtab = 1; - pParse->db = db; - pParse->nQueryLoop = 1; - - if( SQLITE_OK==sqlite3RunParser(pParse, zCreateTable, &zErr) - && pParse->pNewTable - && !db->mallocFailed - && !pParse->pNewTable->pSelect - && !IsVirtual(pParse->pNewTable) - ){ - if( !pTab->aCol ){ - Table *pNew = pParse->pNewTable; - Index *pIdx; - pTab->aCol = pNew->aCol; - pTab->nCol = pNew->nCol; - pTab->tabFlags |= pNew->tabFlags & (TF_WithoutRowid|TF_NoVisibleRowid); - pNew->nCol = 0; - pNew->aCol = 0; - assert( pTab->pIndex==0 ); - if( !HasRowid(pNew) && pCtx->pVTable->pMod->pModule->xUpdate!=0 ){ - rc = SQLITE_ERROR; - } - pIdx = pNew->pIndex; - if( pIdx ){ - assert( pIdx->pNext==0 ); - pTab->pIndex = pIdx; - pNew->pIndex = 0; - pIdx->pTable = pTab; - } + memset(&sParse, 0, sizeof(sParse)); + sParse.eParseMode = PARSE_MODE_DECLARE_VTAB; + sParse.db = db; + sParse.nQueryLoop = 1; + if( SQLITE_OK==sqlite3RunParser(&sParse, zCreateTable, &zErr) + && sParse.pNewTable + && !db->mallocFailed + && !sParse.pNewTable->pSelect + && !IsVirtual(sParse.pNewTable) + ){ + if( !pTab->aCol ){ + Table *pNew = sParse.pNewTable; + Index *pIdx; + pTab->aCol = pNew->aCol; + pTab->nCol = pNew->nCol; + pTab->tabFlags |= pNew->tabFlags & (TF_WithoutRowid|TF_NoVisibleRowid); + pNew->nCol = 0; + pNew->aCol = 0; + assert( pTab->pIndex==0 ); + assert( HasRowid(pNew) || sqlite3PrimaryKeyIndex(pNew)!=0 ); + if( !HasRowid(pNew) + && pCtx->pVTable->pMod->pModule->xUpdate!=0 + && sqlite3PrimaryKeyIndex(pNew)->nKeyCol!=1 + ){ + /* WITHOUT ROWID virtual tables must either be read-only (xUpdate==0) + ** or else must have a single-column PRIMARY KEY */ + rc = SQLITE_ERROR; } - pCtx->bDeclared = 1; - }else{ - sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); - sqlite3DbFree(db, zErr); - rc = SQLITE_ERROR; + pIdx = pNew->pIndex; + if( pIdx ){ + assert( pIdx->pNext==0 ); + pTab->pIndex = pIdx; + pNew->pIndex = 0; + pIdx->pTable = pTab; + } } - pParse->declareVtab = 0; - - if( pParse->pVdbe ){ - sqlite3VdbeFinalize(pParse->pVdbe); - } - sqlite3DeleteTable(db, pParse->pNewTable); - sqlite3ParserReset(pParse); - sqlite3StackFree(db, pParse); + pCtx->bDeclared = 1; + }else{ + sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); + sqlite3DbFree(db, zErr); + rc = SQLITE_ERROR; } + sParse.eParseMode = PARSE_MODE_NORMAL; + if( sParse.pVdbe ){ + sqlite3VdbeFinalize(sParse.pVdbe); + } + sqlite3DeleteTable(db, sParse.pNewTable); + sqlite3ParserReset(&sParse); + assert( (rc&0xff)==rc ); rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); @@ -127060,14 +134594,11 @@ void *pArg = 0; FuncDef *pNew; int rc = 0; - char *zLowerName; - unsigned char *z; - /* Check to see the left operand is a column in a virtual table */ if( NEVER(pExpr==0) ) return pDef; if( pExpr->op!=TK_COLUMN ) return pDef; - pTab = pExpr->pTab; + pTab = pExpr->y.pTab; if( pTab==0 ) return pDef; if( !IsVirtual(pTab) ) return pDef; pVtab = sqlite3GetVTable(db, pTab)->pVtab; @@ -127077,16 +134608,22 @@ if( pMod->xFindFunction==0 ) return pDef; /* Call the xFindFunction method on the virtual table implementation - ** to see if the implementation wants to overload this function + ** to see if the implementation wants to overload this function. + ** + ** Though undocumented, we have historically always invoked xFindFunction + ** with an all lower-case function name. Continue in this tradition to + ** avoid any chance of an incompatibility. */ - zLowerName = sqlite3DbStrDup(db, pDef->zName); - if( zLowerName ){ - for(z=(unsigned char*)zLowerName; *z; z++){ - *z = sqlite3UpperToLower[*z]; +#ifdef SQLITE_DEBUG + { + int i; + for(i=0; pDef->zName[i]; i++){ + unsigned char x = (unsigned char)pDef->zName[i]; + assert( x==sqlite3UpperToLower[x] ); } - rc = pMod->xFindFunction(pVtab, nArg, zLowerName, &xSFunc, &pArg); - sqlite3DbFree(db, zLowerName); } +#endif + rc = pMod->xFindFunction(pVtab, nArg, pDef->zName, &xSFunc, &pArg); if( rc==0 ){ return pDef; } @@ -127298,7 +134835,7 @@ ** Trace output macros */ #if defined(SQLITE_TEST) || defined(SQLITE_DEBUG) -/***/ int sqlite3WhereTrace; +/***/ extern int sqlite3WhereTrace; #endif #if defined(SQLITE_DEBUG) \ && (defined(SQLITE_TEST) || defined(SQLITE_ENABLE_WHERETRACE)) @@ -127361,6 +134898,8 @@ struct InLoop { int iCur; /* The VDBE cursor used by this IN operator */ int addrInTop; /* Top of the IN loop */ + int iBase; /* Base register of multi-key index record */ + int nPrefix; /* Number of prior entires in the key */ u8 eEndLoopOp; /* IN Loop terminator. OP_Next or OP_Prev */ } *aInLoop; /* Information about each nested IN operator */ } in; /* Used when pWLoop->wsFlags&WHERE_IN_ABLE */ @@ -127599,6 +135138,7 @@ WhereInfo *pWInfo; /* WHERE clause processing context */ WhereClause *pOuter; /* Outer conjunction */ u8 op; /* Split operator. TK_AND or TK_OR */ + u8 hasOr; /* True if any a[].eOperator is WO_OR */ int nTerm; /* Number of terms */ int nSlot; /* Number of entries in a[] */ WhereTerm *a; /* Each a[] describes a term of the WHERE cluase */ @@ -127678,6 +135218,7 @@ int nRecValid; /* Number of valid fields currently in pRec */ #endif unsigned int bldFlags; /* SQLITE_BLDF_* flags */ + unsigned int iPlanLimit; /* Search limiter */ }; /* Allowed values for WhereLoopBuider.bldFlags */ @@ -127684,6 +135225,26 @@ #define SQLITE_BLDF_INDEXED 0x0001 /* An index is used */ #define SQLITE_BLDF_UNIQUE 0x0002 /* All keys of a UNIQUE index used */ +/* The WhereLoopBuilder.iPlanLimit is used to limit the number of +** index+constraint combinations the query planner will consider for a +** particular query. If this parameter is unlimited, then certain +** pathological queries can spend excess time in the sqlite3WhereBegin() +** routine. The limit is high enough that is should not impact real-world +** queries. +** +** SQLITE_QUERY_PLANNER_LIMIT is the baseline limit. The limit is +** increased by SQLITE_QUERY_PLANNER_LIMIT_INCR before each term of the FROM +** clause is processed, so that every table in a join is guaranteed to be +** able to propose a some index+constraint combinations even if the initial +** baseline limit was exhausted by prior tables of the join. +*/ +#ifndef SQLITE_QUERY_PLANNER_LIMIT +# define SQLITE_QUERY_PLANNER_LIMIT 20000 +#endif +#ifndef SQLITE_QUERY_PLANNER_LIMIT_INCR +# define SQLITE_QUERY_PLANNER_LIMIT_INCR 1000 +#endif + /* ** The WHERE clause processing routine has two halves. The ** first part does the start of the WHERE loop and the second @@ -127746,12 +135307,10 @@ Parse *pParse, /* Parse context */ SrcList *pTabList, /* Table list this loop refers to */ WhereLevel *pLevel, /* Scan to write OP_Explain opcode for */ - int iLevel, /* Value for "level" column of output */ - int iFrom, /* Value for "from" column of output */ u16 wctrlFlags /* Flags passed to sqlite3WhereBegin() */ ); #else -# define sqlite3WhereExplainOneScan(u,v,w,x,y,z) 0 +# define sqlite3WhereExplainOneScan(u,v,w,x) 0 #endif /* SQLITE_OMIT_EXPLAIN */ #ifdef SQLITE_ENABLE_STMT_SCANSTATUS SQLITE_PRIVATE void sqlite3WhereAddScanStatus( @@ -127774,6 +135333,7 @@ SQLITE_PRIVATE void sqlite3WhereClauseClear(WhereClause*); SQLITE_PRIVATE void sqlite3WhereSplit(WhereClause*,Expr*,u8); SQLITE_PRIVATE Bitmask sqlite3WhereExprUsage(WhereMaskSet*, Expr*); +SQLITE_PRIVATE Bitmask sqlite3WhereExprUsageNN(WhereMaskSet*, Expr*); SQLITE_PRIVATE Bitmask sqlite3WhereExprListUsage(WhereMaskSet*, ExprList*); SQLITE_PRIVATE void sqlite3WhereExprAnalyze(SrcList*, WhereClause*); SQLITE_PRIVATE void sqlite3WhereTabFuncArgs(Parse*, struct SrcList_item*, WhereClause*); @@ -127794,7 +135354,6 @@ ** WO_LE == SQLITE_INDEX_CONSTRAINT_LE ** WO_GT == SQLITE_INDEX_CONSTRAINT_GT ** WO_GE == SQLITE_INDEX_CONSTRAINT_GE -** WO_MATCH == SQLITE_INDEX_CONSTRAINT_MATCH */ #define WO_IN 0x0001 #define WO_EQ 0x0002 @@ -127802,7 +135361,7 @@ #define WO_LE (WO_EQ<<(TK_LE-TK_EQ)) #define WO_GT (WO_EQ<<(TK_GT-TK_EQ)) #define WO_GE (WO_EQ<<(TK_GE-TK_EQ)) -#define WO_MATCH 0x0040 +#define WO_AUX 0x0040 /* Op useful to virtual tables only */ #define WO_IS 0x0080 #define WO_ISNULL 0x0100 #define WO_OR 0x0200 /* Two or more OR-connected terms */ @@ -127837,6 +135396,7 @@ #define WHERE_SKIPSCAN 0x00008000 /* Uses the skip-scan algorithm */ #define WHERE_UNQ_WANTED 0x00010000 /* WHERE_ONEROW would have been helpful*/ #define WHERE_PARTIALIDX 0x00020000 /* The automatic index is partial */ +#define WHERE_IN_EARLYOUT 0x00040000 /* Perhaps quit IN loops early */ /************** End of whereInt.h ********************************************/ /************** Continuing where we left off in wherecode.c ******************/ @@ -127872,23 +135432,23 @@ int i; assert( nTerm>=1 ); - if( bAnd ) sqlite3StrAccumAppend(pStr, " AND ", 5); + if( bAnd ) sqlite3_str_append(pStr, " AND ", 5); - if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, "(", 1); for(i=0; i1 ) sqlite3StrAccumAppend(pStr, ")", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, ")", 1); - sqlite3StrAccumAppend(pStr, zOp, 1); + sqlite3_str_append(pStr, zOp, 1); - if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, "(", 1); for(i=0; i1 ) sqlite3StrAccumAppend(pStr, ")", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, ")", 1); } /* @@ -127912,11 +135472,11 @@ int i, j; if( nEq==0 && (pLoop->wsFlags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))==0 ) return; - sqlite3StrAccumAppend(pStr, " (", 2); + sqlite3_str_append(pStr, " (", 2); for(i=0; i=nSkip ? "%s=?" : "ANY(%s)", z); + if( i ) sqlite3_str_append(pStr, " AND ", 5); + sqlite3_str_appendf(pStr, i>=nSkip ? "%s=?" : "ANY(%s)", z); } j = i; @@ -127927,7 +135487,7 @@ if( pLoop->wsFlags&WHERE_TOP_LIMIT ){ explainAppendTerm(pStr, pIndex, pLoop->u.btree.nTop, j, i, "<"); } - sqlite3StrAccumAppend(pStr, ")", 1); + sqlite3_str_append(pStr, ")", 1); } /* @@ -127943,19 +135503,16 @@ Parse *pParse, /* Parse context */ SrcList *pTabList, /* Table list this loop refers to */ WhereLevel *pLevel, /* Scan to write OP_Explain opcode for */ - int iLevel, /* Value for "level" column of output */ - int iFrom, /* Value for "from" column of output */ u16 wctrlFlags /* Flags passed to sqlite3WhereBegin() */ ){ int ret = 0; #if !defined(SQLITE_DEBUG) && !defined(SQLITE_ENABLE_STMT_SCANSTATUS) - if( pParse->explain==2 ) + if( sqlite3ParseToplevel(pParse)->explain==2 ) #endif { struct SrcList_item *pItem = &pTabList->a[pLevel->iFrom]; Vdbe *v = pParse->pVdbe; /* VM being constructed */ sqlite3 *db = pParse->db; /* Database handle */ - int iId = pParse->iSelectId; /* Select id (left-most output column) */ int isSearch; /* True for a SEARCH. False for SCAN. */ WhereLoop *pLoop; /* The controlling WhereLoop object */ u32 flags; /* Flags that describe this loop */ @@ -127972,15 +135529,15 @@ || (wctrlFlags&(WHERE_ORDERBY_MIN|WHERE_ORDERBY_MAX)); sqlite3StrAccumInit(&str, db, zBuf, sizeof(zBuf), SQLITE_MAX_LENGTH); - sqlite3StrAccumAppendAll(&str, isSearch ? "SEARCH" : "SCAN"); + sqlite3_str_appendall(&str, isSearch ? "SEARCH" : "SCAN"); if( pItem->pSelect ){ - sqlite3XPrintf(&str, " SUBQUERY %d", pItem->iSelectId); + sqlite3_str_appendf(&str, " SUBQUERY %u", pItem->pSelect->selId); }else{ - sqlite3XPrintf(&str, " TABLE %s", pItem->zName); + sqlite3_str_appendf(&str, " TABLE %s", pItem->zName); } if( pItem->zAlias ){ - sqlite3XPrintf(&str, " AS %s", pItem->zAlias); + sqlite3_str_appendf(&str, " AS %s", pItem->zAlias); } if( (flags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0 ){ const char *zFmt = 0; @@ -128003,8 +135560,8 @@ zFmt = "INDEX %s"; } if( zFmt ){ - sqlite3StrAccumAppend(&str, " USING ", 7); - sqlite3XPrintf(&str, zFmt, pIdx->zName); + sqlite3_str_append(&str, " USING ", 7); + sqlite3_str_appendf(&str, zFmt, pIdx->zName); explainIndexRange(&str, pLoop); } }else if( (flags & WHERE_IPK)!=0 && (flags & WHERE_CONSTRAINT)!=0 ){ @@ -128019,23 +135576,26 @@ assert( flags&WHERE_TOP_LIMIT); zRangeOp = "<"; } - sqlite3XPrintf(&str, " USING INTEGER PRIMARY KEY (rowid%s?)",zRangeOp); + sqlite3_str_appendf(&str, + " USING INTEGER PRIMARY KEY (rowid%s?)",zRangeOp); } #ifndef SQLITE_OMIT_VIRTUALTABLE else if( (flags & WHERE_VIRTUALTABLE)!=0 ){ - sqlite3XPrintf(&str, " VIRTUAL TABLE INDEX %d:%s", + sqlite3_str_appendf(&str, " VIRTUAL TABLE INDEX %d:%s", pLoop->u.vtab.idxNum, pLoop->u.vtab.idxStr); } #endif #ifdef SQLITE_EXPLAIN_ESTIMATED_ROWS if( pLoop->nOut>=10 ){ - sqlite3XPrintf(&str, " (~%llu rows)", sqlite3LogEstToInt(pLoop->nOut)); + sqlite3_str_appendf(&str, " (~%llu rows)", + sqlite3LogEstToInt(pLoop->nOut)); }else{ - sqlite3StrAccumAppend(&str, " (~1 row)", 9); + sqlite3_str_append(&str, " (~1 row)", 9); } #endif zMsg = sqlite3StrAccumFinish(&str); - ret = sqlite3VdbeAddOp4(v, OP_Explain, iId, iLevel, iFrom, zMsg,P4_DYNAMIC); + ret = sqlite3VdbeAddOp4(v, OP_Explain, sqlite3VdbeCurrentAddr(v), + pParse->addrExplain, 0, zMsg,P4_DYNAMIC); } return ret; } @@ -128115,8 +135675,8 @@ */ static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){ int nLoop = 0; - while( ALWAYS(pTerm!=0) - && (pTerm->wtFlags & TERM_CODED)==0 + assert( pTerm!=0 ); + while( (pTerm->wtFlags & TERM_CODED)==0 && (pLevel->iLeftJoin==0 || ExprHasProperty(pTerm->pExpr, EP_FromJoin)) && (pLevel->notReady & pTerm->prereqAll)==0 ){ @@ -128127,6 +135687,7 @@ } if( pTerm->iParent<0 ) break; pTerm = &pTerm->pWC->a[pTerm->iParent]; + assert( pTerm!=0 ); pTerm->nChild--; if( pTerm->nChild!=0 ) break; nLoop++; @@ -128167,7 +135728,6 @@ /* Code the OP_Affinity opcode if there is anything left to do. */ if( n>0 ){ sqlite3VdbeAddOp4(v, OP_Affinity, base, n, 0, zAff, n); - sqlite3ExprCacheAffinityChange(pParse, base, n); } } @@ -128197,7 +135757,103 @@ } } + /* +** pX is an expression of the form: (vector) IN (SELECT ...) +** In other words, it is a vector IN operator with a SELECT clause on the +** LHS. But not all terms in the vector are indexable and the terms might +** not be in the correct order for indexing. +** +** This routine makes a copy of the input pX expression and then adjusts +** the vector on the LHS with corresponding changes to the SELECT so that +** the vector contains only index terms and those terms are in the correct +** order. The modified IN expression is returned. The caller is responsible +** for deleting the returned expression. +** +** Example: +** +** CREATE TABLE t1(a,b,c,d,e,f); +** CREATE INDEX t1x1 ON t1(e,c); +** SELECT * FROM t1 WHERE (a,b,c,d,e) IN (SELECT v,w,x,y,z FROM t2) +** \_______________________________________/ +** The pX expression +** +** Since only columns e and c can be used with the index, in that order, +** the modified IN expression that is returned will be: +** +** (e,c) IN (SELECT z,x FROM t2) +** +** The reduced pX is different from the original (obviously) and thus is +** only used for indexing, to improve performance. The original unaltered +** IN expression must also be run on each output row for correctness. +*/ +static Expr *removeUnindexableInClauseTerms( + Parse *pParse, /* The parsing context */ + int iEq, /* Look at loop terms starting here */ + WhereLoop *pLoop, /* The current loop */ + Expr *pX /* The IN expression to be reduced */ +){ + sqlite3 *db = pParse->db; + Expr *pNew = sqlite3ExprDup(db, pX, 0); + if( db->mallocFailed==0 ){ + ExprList *pOrigRhs = pNew->x.pSelect->pEList; /* Original unmodified RHS */ + ExprList *pOrigLhs = pNew->pLeft->x.pList; /* Original unmodified LHS */ + ExprList *pRhs = 0; /* New RHS after modifications */ + ExprList *pLhs = 0; /* New LHS after mods */ + int i; /* Loop counter */ + Select *pSelect; /* Pointer to the SELECT on the RHS */ + + for(i=iEq; inLTerm; i++){ + if( pLoop->aLTerm[i]->pExpr==pX ){ + int iField = pLoop->aLTerm[i]->iField - 1; + if( pOrigRhs->a[iField].pExpr==0 ) continue; /* Duplicate PK column */ + pRhs = sqlite3ExprListAppend(pParse, pRhs, pOrigRhs->a[iField].pExpr); + pOrigRhs->a[iField].pExpr = 0; + assert( pOrigLhs->a[iField].pExpr!=0 ); + pLhs = sqlite3ExprListAppend(pParse, pLhs, pOrigLhs->a[iField].pExpr); + pOrigLhs->a[iField].pExpr = 0; + } + } + sqlite3ExprListDelete(db, pOrigRhs); + sqlite3ExprListDelete(db, pOrigLhs); + pNew->pLeft->x.pList = pLhs; + pNew->x.pSelect->pEList = pRhs; + if( pLhs && pLhs->nExpr==1 ){ + /* Take care here not to generate a TK_VECTOR containing only a + ** single value. Since the parser never creates such a vector, some + ** of the subroutines do not handle this case. */ + Expr *p = pLhs->a[0].pExpr; + pLhs->a[0].pExpr = 0; + sqlite3ExprDelete(db, pNew->pLeft); + pNew->pLeft = p; + } + pSelect = pNew->x.pSelect; + if( pSelect->pOrderBy ){ + /* If the SELECT statement has an ORDER BY clause, zero the + ** iOrderByCol variables. These are set to non-zero when an + ** ORDER BY term exactly matches one of the terms of the + ** result-set. Since the result-set of the SELECT statement may + ** have been modified or reordered, these variables are no longer + ** set correctly. Since setting them is just an optimization, + ** it's easiest just to zero them here. */ + ExprList *pOrderBy = pSelect->pOrderBy; + for(i=0; inExpr; i++){ + pOrderBy->a[i].u.x.iOrderByCol = 0; + } + } + +#if 0 + printf("For indexing, change the IN expr:\n"); + sqlite3TreeViewExpr(0, pX, 0); + printf("Into:\n"); + sqlite3TreeViewExpr(0, pNew, 0); +#endif + } + return pNew; +} + + +/* ** Generate code for a single equality term of the WHERE clause. An equality ** term can be either X=expr or X IN (...). pTerm is the term to be ** coded. @@ -128259,68 +135915,23 @@ } } for(i=iEq;inLTerm; i++){ - if( ALWAYS(pLoop->aLTerm[i]) && pLoop->aLTerm[i]->pExpr==pX ) nEq++; + assert( pLoop->aLTerm[i]!=0 ); + if( pLoop->aLTerm[i]->pExpr==pX ) nEq++; } if( (pX->flags & EP_xIsSelect)==0 || pX->x.pSelect->pEList->nExpr==1 ){ eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, 0); }else{ - Select *pSelect = pX->x.pSelect; sqlite3 *db = pParse->db; - u16 savedDbOptFlags = db->dbOptFlags; - ExprList *pOrigRhs = pSelect->pEList; - ExprList *pOrigLhs = pX->pLeft->x.pList; - ExprList *pRhs = 0; /* New Select.pEList for RHS */ - ExprList *pLhs = 0; /* New pX->pLeft vector */ + pX = removeUnindexableInClauseTerms(pParse, iEq, pLoop, pX); - for(i=iEq;inLTerm; i++){ - if( pLoop->aLTerm[i]->pExpr==pX ){ - int iField = pLoop->aLTerm[i]->iField - 1; - Expr *pNewRhs = sqlite3ExprDup(db, pOrigRhs->a[iField].pExpr, 0); - Expr *pNewLhs = sqlite3ExprDup(db, pOrigLhs->a[iField].pExpr, 0); - - pRhs = sqlite3ExprListAppend(pParse, pRhs, pNewRhs); - pLhs = sqlite3ExprListAppend(pParse, pLhs, pNewLhs); - } - } if( !db->mallocFailed ){ - Expr *pLeft = pX->pLeft; - - if( pSelect->pOrderBy ){ - /* If the SELECT statement has an ORDER BY clause, zero the - ** iOrderByCol variables. These are set to non-zero when an - ** ORDER BY term exactly matches one of the terms of the - ** result-set. Since the result-set of the SELECT statement may - ** have been modified or reordered, these variables are no longer - ** set correctly. Since setting them is just an optimization, - ** it's easiest just to zero them here. */ - ExprList *pOrderBy = pSelect->pOrderBy; - for(i=0; inExpr; i++){ - pOrderBy->a[i].u.x.iOrderByCol = 0; - } - } - - /* Take care here not to generate a TK_VECTOR containing only a - ** single value. Since the parser never creates such a vector, some - ** of the subroutines do not handle this case. */ - if( pLhs->nExpr==1 ){ - pX->pLeft = pLhs->a[0].pExpr; - }else{ - pLeft->x.pList = pLhs; - aiMap = (int*)sqlite3DbMallocZero(pParse->db, sizeof(int) * nEq); - testcase( aiMap==0 ); - } - pSelect->pEList = pRhs; - db->dbOptFlags |= SQLITE_QueryFlattener; + aiMap = (int*)sqlite3DbMallocZero(pParse->db, sizeof(int)*nEq); eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, aiMap); - db->dbOptFlags = savedDbOptFlags; - testcase( aiMap!=0 && aiMap[0]!=0 ); - pSelect->pEList = pOrigRhs; - pLeft->x.pList = pOrigLhs; - pX->pLeft = pLeft; + pTerm->pExpr->iTable = pX->iTable; } - sqlite3ExprListDelete(pParse->db, pLhs); - sqlite3ExprListDelete(pParse->db, pRhs); + sqlite3ExprDelete(db, pX); + pX = pTerm->pExpr; } if( eType==IN_INDEX_INDEX_DESC ){ @@ -128360,7 +135971,14 @@ sqlite3VdbeAddOp1(v, OP_IsNull, iOut); VdbeCoverage(v); if( i==iEq ){ pIn->iCur = iTab; - pIn->eEndLoopOp = bRev ? OP_PrevIfOpen : OP_NextIfOpen; + pIn->eEndLoopOp = bRev ? OP_Prev : OP_Next; + if( iEq>0 && (pLoop->wsFlags & WHERE_VIRTUALTABLE)==0 ){ + pIn->iBase = iReg - i; + pIn->nPrefix = i; + pLoop->wsFlags |= WHERE_IN_EARLYOUT; + }else{ + pIn->nPrefix = 0; + } }else{ pIn->eEndLoopOp = OP_Noop; } @@ -128615,7 +136233,7 @@ pWalker->eCode = 1; }else if( pExpr->op==TK_FUNCTION ){ int d1; - char d2[3]; + char d2[4]; if( 0==sqlite3IsLikeFunction(pWalker->pParse->db, pExpr, &d1, d2) ){ pWalker->eCode = 1; } @@ -128647,11 +136265,8 @@ struct CCurHint *pHint = pWalker->u.pCCurHint; if( pExpr->op==TK_COLUMN ){ if( pExpr->iTable!=pHint->iTabCur ){ - Vdbe *v = pWalker->pParse->pVdbe; int reg = ++pWalker->pParse->nMem; /* Register for column value */ - sqlite3ExprCodeGetColumnOfTable( - v, pExpr->pTab, pExpr->iTable, pExpr->iColumn, reg - ); + sqlite3ExprCode(pWalker->pParse, pExpr, reg); pExpr->op = TK_REGISTER; pExpr->iTable = reg; }else if( pHint->pIdx!=0 ){ @@ -128838,7 +136453,7 @@ */ static void codeExprOrVector(Parse *pParse, Expr *p, int iReg, int nReg){ assert( nReg>0 ); - if( sqlite3ExprIsVector(p) ){ + if( p && sqlite3ExprIsVector(p) ){ #ifndef SQLITE_OMIT_SUBQUERY if( (p->flags & EP_xIsSelect) ){ Vdbe *v = pParse->pVdbe; @@ -128883,7 +136498,7 @@ pExpr->op = TK_COLUMN; pExpr->iTable = pX->iIdxCur; pExpr->iColumn = pX->iIdxCol; - pExpr->pTab = 0; + pExpr->y.pTab = 0; return WRC_Prune; }else{ return WRC_Continue; @@ -128891,9 +136506,9 @@ } /* -** For an indexes on expression X, locate every instance of expression X in pExpr -** and change that subexpression into a reference to the appropriate column of -** the index. +** For an indexes on expression X, locate every instance of expression X +** in pExpr and change that subexpression into a reference to the appropriate +** column of the index. */ static void whereIndexExprTrans( Index *pIdx, /* The Index */ @@ -128984,6 +136599,9 @@ ** initialize a memory cell that records if this table matches any ** row of the left table of the join. */ + assert( (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE) + || pLevel->iFrom>0 || (pTabItem[0].fg.jointype & JT_LEFT)==0 + ); if( pLevel->iFrom>0 && (pTabItem[0].fg.jointype & JT_LEFT)!=0 ){ pLevel->iLeftJoin = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, pLevel->iLeftJoin); @@ -129001,7 +136619,7 @@ sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, pTabItem->addrFillSub); pLevel->p2 = sqlite3VdbeAddOp2(v, OP_Yield, regYield, addrBrk); VdbeCoverage(v); - VdbeComment((v, "next row of \"%s\"", pTabItem->pTab->zName)); + VdbeComment((v, "next row of %s", pTabItem->pTab->zName)); pLevel->op = OP_Goto; }else @@ -129015,7 +136633,6 @@ int nConstraint = pLoop->nLTerm; int iIn; /* Counter for IN constraints */ - sqlite3ExprCachePush(pParse); iReg = sqlite3GetTempRange(pParse, nConstraint+2); addrNotFound = pLevel->addrBrk; for(j=0; jaddrNxt; sqlite3VdbeAddOp3(v, OP_SeekRowid, iCur, addrNxt, iRowidReg); VdbeCoverage(v); - sqlite3ExprCacheAffinityChange(pParse, iRowidReg, 1); - sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); - VdbeComment((v, "pk")); pLevel->op = OP_Noop; }else if( (pLoop->wsFlags & WHERE_IPK)!=0 && (pLoop->wsFlags & WHERE_COLUMN_RANGE)!=0 @@ -129164,7 +136777,15 @@ if( sqlite3ExprIsVector(pX->pRight) ){ r1 = rTemp = sqlite3GetTempReg(pParse); codeExprOrVector(pParse, pX->pRight, r1, 1); - op = aMoveOp[(pX->op - TK_GT) | 0x0001]; + testcase( pX->op==TK_GT ); + testcase( pX->op==TK_GE ); + testcase( pX->op==TK_LT ); + testcase( pX->op==TK_LE ); + op = aMoveOp[((pX->op - TK_GT - 1) & 0x3) | 0x1]; + assert( pX->op!=TK_GT || op==OP_SeekGE ); + assert( pX->op!=TK_GE || op==OP_SeekGE ); + assert( pX->op!=TK_LT || op==OP_SeekLE ); + assert( pX->op!=TK_LE || op==OP_SeekLE ); }else{ r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp); disableTerm(pLevel, pStart); @@ -129176,7 +136797,6 @@ VdbeCoverageIf(v, pX->op==TK_LE); VdbeCoverageIf(v, pX->op==TK_LT); VdbeCoverageIf(v, pX->op==TK_GE); - sqlite3ExprCacheAffinityChange(pParse, r1, 1); sqlite3ReleaseTempReg(pParse, rTemp); }else{ sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrHalt); @@ -129211,7 +136831,6 @@ if( testOp!=OP_Noop ){ iRowidReg = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Rowid, iCur, iRowidReg); - sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); sqlite3VdbeAddOp3(v, testOp, memEndValue, addrBrk, iRowidReg); VdbeCoverageIf(v, testOp==OP_Le); VdbeCoverageIf(v, testOp==OP_Lt); @@ -129416,6 +137035,9 @@ ** above has already left the cursor sitting on the correct row, ** so no further seeking is needed */ }else{ + if( pLoop->wsFlags & WHERE_IN_EARLYOUT ){ + sqlite3VdbeAddOp1(v, OP_SeekHit, iIdxCur); + } op = aStartOp[(start_constraints<<2) + (startEq<<1) + bRev]; assert( op!=0 ); sqlite3VdbeAddOp4Int(v, op, iIdxCur, addrNxt, regBase, nConstraint); @@ -129434,7 +137056,6 @@ nConstraint = nEq; if( pRangeEnd ){ Expr *pRight = pRangeEnd->pExpr->pRight; - sqlite3ExprCacheRemove(pParse, regBase+nEq, 1); codeExprOrVector(pParse, pRight, regBase+nEq, nTop); whereLikeOptimizationStringFixup(v, pLevel, pRangeEnd); if( (pRangeEnd->wtFlags & TERM_VNULL)==0 @@ -129478,6 +137099,10 @@ testcase( op==OP_IdxLE ); VdbeCoverageIf(v, op==OP_IdxLE ); } + if( pLoop->wsFlags & WHERE_IN_EARLYOUT ){ + sqlite3VdbeAddOp2(v, OP_SeekHit, iIdxCur, 1); + } + /* Seek the table cursor, if required */ if( omitTable ){ /* pIdx is a covering index. No need to access the main table. */ @@ -129488,7 +137113,6 @@ )){ iRowidReg = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_IdxRowid, iIdxCur, iRowidReg); - sqlite3ExprCacheStore(pParse, iCur, -1, iRowidReg); sqlite3VdbeAddOp3(v, OP_NotExists, iCur, 0, iRowidReg); VdbeCoverage(v); }else{ @@ -129508,10 +137132,17 @@ /* If pIdx is an index on one or more expressions, then look through ** all the expressions in pWInfo and try to transform matching expressions ** into reference to index columns. + ** + ** Do not do this for the RHS of a LEFT JOIN. This is because the + ** expression may be evaluated after OP_NullRow has been executed on + ** the cursor. In this case it is important to do the full evaluation, + ** as the result of the expression may not be NULL, even if all table + ** column values are. https://www.sqlite.org/src/info/7fa8049685b50b5a */ - whereIndexExprTrans(pIdx, iCur, iIdxCur, pWInfo); + if( pLevel->iLeftJoin==0 ){ + whereIndexExprTrans(pIdx, iCur, iIdxCur, pWInfo); + } - /* Record the instruction used to terminate the loop. */ if( pLoop->wsFlags & WHERE_ONEROW ){ pLevel->op = OP_Noop; @@ -129666,7 +137297,6 @@ for(iTerm=0; iTermnTerm; iTerm++){ Expr *pExpr = pWC->a[iTerm].pExpr; if( &pWC->a[iTerm] == pTerm ) continue; - if( ExprHasProperty(pExpr, EP_FromJoin) ) continue; testcase( pWC->a[iTerm].wtFlags & TERM_VIRTUAL ); testcase( pWC->a[iTerm].wtFlags & TERM_CODED ); if( (pWC->a[iTerm].wtFlags & (TERM_VIRTUAL|TERM_CODED))!=0 ) continue; @@ -129685,6 +137315,7 @@ ** sub-WHERE clause is to to invoke the main loop body as a subroutine. */ wctrlFlags = WHERE_OR_SUBCLAUSE | (pWInfo->wctrlFlags & WHERE_SEEK_TABLE); + ExplainQueryPlan((pParse, 1, "MULTI-INDEX OR")); for(ii=0; iinTerm; ii++){ WhereTerm *pOrTerm = &pOrWc->a[ii]; if( pOrTerm->leftCursor==iCur || (pOrTerm->eOperator & WO_AND)!=0 ){ @@ -129691,7 +137322,10 @@ WhereInfo *pSubWInfo; /* Info for single OR-term scan */ Expr *pOrExpr = pOrTerm->pExpr; /* Current OR clause term */ int jmp1 = 0; /* Address of jump operation */ - if( pAndExpr && !ExprHasProperty(pOrExpr, EP_FromJoin) ){ + assert( (pTabItem[0].fg.jointype & JT_LEFT)==0 + || ExprHasProperty(pOrExpr, EP_FromJoin) + ); + if( pAndExpr ){ pAndExpr->pLeft = pOrExpr; pOrExpr = pAndExpr; } @@ -129703,7 +137337,7 @@ if( pSubWInfo ){ WhereLoop *pSubLoop; int addrExplain = sqlite3WhereExplainOneScan( - pParse, pOrTab, &pSubWInfo->a[0], iLevel, pLevel->iFrom, 0 + pParse, pOrTab, &pSubWInfo->a[0], 0 ); sqlite3WhereAddScanStatus(v, pOrTab, &pSubWInfo->a[0], addrExplain); @@ -129713,23 +137347,23 @@ ** row will be skipped in subsequent sub-WHERE clauses. */ if( (pWInfo->wctrlFlags & WHERE_DUPLICATES_OK)==0 ){ - int r; int iSet = ((ii==pOrWc->nTerm-1)?-1:ii); if( HasRowid(pTab) ){ - r = sqlite3ExprCodeGetColumn(pParse, pTab, -1, iCur, regRowid, 0); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iCur, -1, regRowid); jmp1 = sqlite3VdbeAddOp4Int(v, OP_RowSetTest, regRowset, 0, - r,iSet); + regRowid, iSet); VdbeCoverage(v); }else{ Index *pPk = sqlite3PrimaryKeyIndex(pTab); int nPk = pPk->nKeyCol; int iPk; + int r; /* Read the PK into an array of temp registers. */ r = sqlite3GetTempRange(pParse, nPk); for(iPk=0; iPkaiColumn[iPk]; - sqlite3ExprCodeGetColumnToReg(pParse, pTab, iCol, iCur, r+iPk); + sqlite3ExprCodeGetColumnOfTable(v, pTab, iCur, iCol, r+iPk); } /* Check if the temp table already contains this key. If so, @@ -129802,6 +137436,7 @@ } } } + ExplainQueryPlanPop(pParse); pLevel->u.pCovidx = pCov; if( pCov ) pLevel->iIdxCur = iCovCur; if( pAndExpr ){ @@ -129874,7 +137509,7 @@ } pE = pTerm->pExpr; assert( pE!=0 ); - if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){ + if( (pTabItem->fg.jointype&JT_LEFT) && !ExprHasProperty(pE,EP_FromJoin) ){ continue; } @@ -129887,7 +137522,7 @@ continue; } - if( pTerm->wtFlags & TERM_LIKECOND ){ + if( (pTerm->wtFlags & TERM_LIKECOND)!=0 ){ /* If the TERM_LIKECOND flag is set, that means that the range search ** is sufficient to guarantee that the LIKE operator is true, so we ** can skip the call to the like(A,B) function. But this only works @@ -129897,8 +137532,9 @@ continue; #else u32 x = pLevel->iLikeRepCntr; - assert( x>0 ); - skipLikeAddr = sqlite3VdbeAddOp1(v, (x&1)?OP_IfNot:OP_If, (int)(x>>1)); + if( x>0 ){ + skipLikeAddr = sqlite3VdbeAddOp1(v, (x&1)?OP_IfNot:OP_If,(int)(x>>1)); + } VdbeCoverage(v); #endif } @@ -129938,6 +137574,12 @@ WO_EQ|WO_IN|WO_IS, 0); if( pAlt==0 ) continue; if( pAlt->wtFlags & (TERM_CODED) ) continue; + if( (pAlt->eOperator & WO_IN) + && (pAlt->pExpr->flags & EP_xIsSelect) + && (pAlt->pExpr->x.pSelect->pEList->nExpr>1) + ){ + continue; + } testcase( pAlt->eOperator & WO_EQ ); testcase( pAlt->eOperator & WO_IS ); testcase( pAlt->eOperator & WO_IN ); @@ -129954,7 +137596,6 @@ pLevel->addrFirst = sqlite3VdbeCurrentAddr(v); sqlite3VdbeAddOp2(v, OP_Integer, 1, pLevel->iLeftJoin); VdbeComment((v, "record LEFT JOIN hit")); - sqlite3ExprCacheClear(pParse); for(pTerm=pWC->a, j=0; jnTerm; j++, pTerm++){ testcase( pTerm->wtFlags & TERM_VIRTUAL ); testcase( pTerm->wtFlags & TERM_CODED ); @@ -130170,18 +137811,18 @@ int *pisComplete, /* True if the only wildcard is % in the last character */ int *pnoCase /* True if uppercase is equivalent to lowercase */ ){ - const char *z = 0; /* String on RHS of LIKE operator */ + const u8 *z = 0; /* String on RHS of LIKE operator */ Expr *pRight, *pLeft; /* Right and left size of LIKE operator */ ExprList *pList; /* List of operands to the LIKE operator */ - int c; /* One character in z[] */ + u8 c; /* One character in z[] */ int cnt; /* Number of non-wildcard prefix characters */ - char wc[3]; /* Wildcard characters */ + u8 wc[4]; /* Wildcard characters */ sqlite3 *db = pParse->db; /* Database connection */ sqlite3_value *pVal = 0; int op; /* Opcode of pRight */ int rc; /* Result code to return */ - if( !sqlite3IsLikeFunction(db, pExpr, pnoCase, wc) ){ + if( !sqlite3IsLikeFunction(db, pExpr, pnoCase, (char*)wc) ){ return 0; } #ifdef SQLITE_EBCDIC @@ -130197,41 +137838,78 @@ int iCol = pRight->iColumn; pVal = sqlite3VdbeGetBoundValue(pReprepare, iCol, SQLITE_AFF_BLOB); if( pVal && sqlite3_value_type(pVal)==SQLITE_TEXT ){ - z = (char *)sqlite3_value_text(pVal); + z = sqlite3_value_text(pVal); } sqlite3VdbeSetVarmask(pParse->pVdbe, iCol); assert( pRight->op==TK_VARIABLE || pRight->op==TK_REGISTER ); }else if( op==TK_STRING ){ - z = pRight->u.zToken; + z = (u8*)pRight->u.zToken; } if( z ){ - /* If the RHS begins with a digit or a minus sign, then the LHS must - ** be an ordinary column (not a virtual table column) with TEXT affinity. - ** Otherwise the LHS might be numeric and "lhs >= rhs" would be false - ** even though "lhs LIKE rhs" is true. But if the RHS does not start - ** with a digit or '-', then "lhs LIKE rhs" will always be false if - ** the LHS is numeric and so the optimization still works. - */ - if( sqlite3Isdigit(z[0]) || z[0]=='-' ){ - if( pLeft->op!=TK_COLUMN - || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT - || IsVirtual(pLeft->pTab) /* Value might be numeric */ - ){ - sqlite3ValueFree(pVal); - return 0; - } - } + /* Count the number of prefix characters prior to the first wildcard */ cnt = 0; while( (c=z[cnt])!=0 && c!=wc[0] && c!=wc[1] && c!=wc[2] ){ cnt++; + if( c==wc[3] && z[cnt]!=0 ) cnt++; } - if( cnt!=0 && 255!=(u8)z[cnt-1] ){ + + /* The optimization is possible only if (1) the pattern does not begin + ** with a wildcard and if (2) the non-wildcard prefix does not end with + ** an (illegal 0xff) character, or (3) the pattern does not consist of + ** a single escape character. The second condition is necessary so + ** that we can increment the prefix key to find an upper bound for the + ** range search. The third is because the caller assumes that the pattern + ** consists of at least one character after all escapes have been + ** removed. */ + if( cnt!=0 && 255!=(u8)z[cnt-1] && (cnt>1 || z[0]!=wc[3]) ){ Expr *pPrefix; + + /* A "complete" match if the pattern ends with "*" or "%" */ *pisComplete = c==wc[0] && z[cnt+1]==0; - pPrefix = sqlite3Expr(db, TK_STRING, z); - if( pPrefix ) pPrefix->u.zToken[cnt] = 0; + + /* Get the pattern prefix. Remove all escapes from the prefix. */ + pPrefix = sqlite3Expr(db, TK_STRING, (char*)z); + if( pPrefix ){ + int iFrom, iTo; + char *zNew = pPrefix->u.zToken; + zNew[cnt] = 0; + for(iFrom=iTo=0; iFrom= rhs" would be false + ** even though "lhs LIKE rhs" is true. But if the RHS does not start + ** with a digit or '-', then "lhs LIKE rhs" will always be false if + ** the LHS is numeric and so the optimization still works. + ** + ** 2018-09-10 ticket c94369cae9b561b1f996d0054bfab11389f9d033 + ** The RHS pattern must not be '/%' because the termination condition + ** will then become "x<'0'" and if the affinity is numeric, will then + ** be converted into "x<0", which is incorrect. + */ + if( sqlite3Isdigit(zNew[0]) + || zNew[0]=='-' + || (zNew[0]+1=='0' && iTo==1) + ){ + if( pLeft->op!=TK_COLUMN + || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT + || IsVirtual(pLeft->y.pTab) /* Value might be numeric */ + ){ + sqlite3ExprDelete(db, pPrefix); + sqlite3ValueFree(pVal); + return 0; + } + } + } *ppPrefix = pPrefix; + + /* If the RHS pattern is a bound parameter, make arrangements to + ** reprepare the statement when that parameter is rebound */ if( op==TK_VARIABLE ){ Vdbe *v = pParse->pVdbe; sqlite3VdbeSetVarmask(v, pRight->iColumn); @@ -130262,48 +137940,123 @@ #ifndef SQLITE_OMIT_VIRTUALTABLE /* -** Check to see if the given expression is of the form +** Check to see if the pExpr expression is a form that needs to be passed +** to the xBestIndex method of virtual tables. Forms of interest include: ** -** column OP expr +** Expression Virtual Table Operator +** ----------------------- --------------------------------- +** 1. column MATCH expr SQLITE_INDEX_CONSTRAINT_MATCH +** 2. column GLOB expr SQLITE_INDEX_CONSTRAINT_GLOB +** 3. column LIKE expr SQLITE_INDEX_CONSTRAINT_LIKE +** 4. column REGEXP expr SQLITE_INDEX_CONSTRAINT_REGEXP +** 5. column != expr SQLITE_INDEX_CONSTRAINT_NE +** 6. expr != column SQLITE_INDEX_CONSTRAINT_NE +** 7. column IS NOT expr SQLITE_INDEX_CONSTRAINT_ISNOT +** 8. expr IS NOT column SQLITE_INDEX_CONSTRAINT_ISNOT +** 9. column IS NOT NULL SQLITE_INDEX_CONSTRAINT_ISNOTNULL ** -** where OP is one of MATCH, GLOB, LIKE or REGEXP and "column" is a -** column of a virtual table. +** In every case, "column" must be a column of a virtual table. If there +** is a match, set *ppLeft to the "column" expression, set *ppRight to the +** "expr" expression (even though in forms (6) and (8) the column is on the +** right and the expression is on the left). Also set *peOp2 to the +** appropriate virtual table operator. The return value is 1 or 2 if there +** is a match. The usual return is 1, but if the RHS is also a column +** of virtual table in forms (5) or (7) then return 2. ** -** If it is then return TRUE. If not, return FALSE. +** If the expression matches none of the patterns above, return 0. */ -static int isMatchOfColumn( +static int isAuxiliaryVtabOperator( + sqlite3 *db, /* Parsing context */ Expr *pExpr, /* Test this expression */ - unsigned char *peOp2 /* OUT: 0 for MATCH, or else an op2 value */ + unsigned char *peOp2, /* OUT: 0 for MATCH, or else an op2 value */ + Expr **ppLeft, /* Column expression to left of MATCH/op2 */ + Expr **ppRight /* Expression to left of MATCH/op2 */ ){ - static const struct Op2 { - const char *zOp; - unsigned char eOp2; - } aOp[] = { - { "match", SQLITE_INDEX_CONSTRAINT_MATCH }, - { "glob", SQLITE_INDEX_CONSTRAINT_GLOB }, - { "like", SQLITE_INDEX_CONSTRAINT_LIKE }, - { "regexp", SQLITE_INDEX_CONSTRAINT_REGEXP } - }; - ExprList *pList; - Expr *pCol; /* Column reference */ - int i; + if( pExpr->op==TK_FUNCTION ){ + static const struct Op2 { + const char *zOp; + unsigned char eOp2; + } aOp[] = { + { "match", SQLITE_INDEX_CONSTRAINT_MATCH }, + { "glob", SQLITE_INDEX_CONSTRAINT_GLOB }, + { "like", SQLITE_INDEX_CONSTRAINT_LIKE }, + { "regexp", SQLITE_INDEX_CONSTRAINT_REGEXP } + }; + ExprList *pList; + Expr *pCol; /* Column reference */ + int i; - if( pExpr->op!=TK_FUNCTION ){ - return 0; - } - pList = pExpr->x.pList; - if( pList==0 || pList->nExpr!=2 ){ - return 0; - } - pCol = pList->a[1].pExpr; - if( pCol->op!=TK_COLUMN || !IsVirtual(pCol->pTab) ){ - return 0; - } - for(i=0; iu.zToken, aOp[i].zOp)==0 ){ - *peOp2 = aOp[i].eOp2; - return 1; + pList = pExpr->x.pList; + if( pList==0 || pList->nExpr!=2 ){ + return 0; } + + /* Built-in operators MATCH, GLOB, LIKE, and REGEXP attach to a + ** virtual table on their second argument, which is the same as + ** the left-hand side operand in their in-fix form. + ** + ** vtab_column MATCH expression + ** MATCH(expression,vtab_column) + */ + pCol = pList->a[1].pExpr; + if( pCol->op==TK_COLUMN && IsVirtual(pCol->y.pTab) ){ + for(i=0; iu.zToken, aOp[i].zOp)==0 ){ + *peOp2 = aOp[i].eOp2; + *ppRight = pList->a[0].pExpr; + *ppLeft = pCol; + return 1; + } + } + } + + /* We can also match against the first column of overloaded + ** functions where xFindFunction returns a value of at least + ** SQLITE_INDEX_CONSTRAINT_FUNCTION. + ** + ** OVERLOADED(vtab_column,expression) + ** + ** Historically, xFindFunction expected to see lower-case function + ** names. But for this use case, xFindFunction is expected to deal + ** with function names in an arbitrary case. + */ + pCol = pList->a[0].pExpr; + if( pCol->op==TK_COLUMN && IsVirtual(pCol->y.pTab) ){ + sqlite3_vtab *pVtab; + sqlite3_module *pMod; + void (*xNotUsed)(sqlite3_context*,int,sqlite3_value**); + void *pNotUsed; + pVtab = sqlite3GetVTable(db, pCol->y.pTab)->pVtab; + assert( pVtab!=0 ); + assert( pVtab->pModule!=0 ); + pMod = (sqlite3_module *)pVtab->pModule; + if( pMod->xFindFunction!=0 ){ + i = pMod->xFindFunction(pVtab,2, pExpr->u.zToken, &xNotUsed, &pNotUsed); + if( i>=SQLITE_INDEX_CONSTRAINT_FUNCTION ){ + *peOp2 = i; + *ppRight = pList->a[1].pExpr; + *ppLeft = pCol; + return 1; + } + } + } + }else if( pExpr->op==TK_NE || pExpr->op==TK_ISNOT || pExpr->op==TK_NOTNULL ){ + int res = 0; + Expr *pLeft = pExpr->pLeft; + Expr *pRight = pExpr->pRight; + if( pLeft->op==TK_COLUMN && IsVirtual(pLeft->y.pTab) ){ + res++; + } + if( pRight && pRight->op==TK_COLUMN && IsVirtual(pRight->y.pTab) ){ + res++; + SWAP(Expr*, pLeft, pRight); + } + *ppLeft = pLeft; + *ppRight = pRight; + if( pExpr->op==TK_NE ) *peOp2 = SQLITE_INDEX_CONSTRAINT_NE; + if( pExpr->op==TK_ISNOT ) *peOp2 = SQLITE_INDEX_CONSTRAINT_ISNOT; + if( pExpr->op==TK_NOTNULL ) *peOp2 = SQLITE_INDEX_CONSTRAINT_ISNOTNULL; + return res; } return 0; } @@ -130554,7 +138307,7 @@ for(j=0, pAndTerm=pAndWC->a; jnTerm; j++, pAndTerm++){ assert( pAndTerm->pExpr ); if( allowedOp(pAndTerm->pExpr->op) - || pAndTerm->eOperator==WO_MATCH + || pAndTerm->eOperator==WO_AUX ){ b |= sqlite3WhereGetMask(&pWInfo->sMaskSet, pAndTerm->leftCursor); } @@ -130586,7 +138339,12 @@ ** empty. */ pOrInfo->indexable = indexable; - pTerm->eOperator = indexable==0 ? 0 : WO_OR; + if( indexable ){ + pTerm->eOperator = WO_OR; + pWC->hasOr = 1; + }else{ + pTerm->eOperator = WO_OR; + } /* For a two-way OR, attempt to implementation case 2. */ @@ -130727,12 +138485,11 @@ idxNew = whereClauseInsert(pWC, pNew, TERM_VIRTUAL|TERM_DYNAMIC); testcase( idxNew==0 ); exprAnalyze(pSrc, pWC, idxNew); - pTerm = &pWC->a[idxTerm]; + /* pTerm = &pWC->a[idxTerm]; // would be needed if pTerm where used again */ markTermAsChild(pWC, idxNew, idxTerm); }else{ sqlite3ExprListDelete(db, pList); } - pTerm->eOperator = WO_NOOP; /* case 1 trumps case 3 */ } } } @@ -130756,7 +138513,6 @@ static int termIsEquivalence(Parse *pParse, Expr *pExpr){ char aff1, aff2; CollSeq *pColl; - const char *zColl1, *zColl2; if( !OptimizationEnabled(pParse->db, SQLITE_Transitive) ) return 0; if( pExpr->op!=TK_EQ && pExpr->op!=TK_IS ) return 0; if( ExprHasProperty(pExpr, EP_FromJoin) ) return 0; @@ -130768,12 +138524,8 @@ return 0; } pColl = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft, pExpr->pRight); - if( pColl==0 || sqlite3StrICmp(pColl->zName, "BINARY")==0 ) return 1; - pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft); - zColl1 = pColl ? pColl->zName : 0; - pColl = sqlite3ExprCollSeq(pParse, pExpr->pRight); - zColl2 = pColl ? pColl->zName : 0; - return sqlite3_stricmp(zColl1, zColl2)==0; + if( sqlite3IsBinary(pColl) ) return 1; + return sqlite3ExprCollSeqMatch(pParse, pExpr->pLeft, pExpr->pRight); } /* @@ -130795,6 +138547,9 @@ for(i=0; inSrc; i++){ mask |= exprSelectUsage(pMaskSet, pSrc->a[i].pSelect); mask |= sqlite3WhereExprUsage(pMaskSet, pSrc->a[i].pOn); + if( pSrc->a[i].fg.isTabFunc ){ + mask |= sqlite3WhereExprListUsage(pMaskSet, pSrc->a[i].u1.pFuncArg); + } } } pS = pS->pPrior; @@ -130902,7 +138657,7 @@ int op; /* Top-level operator. pExpr->op */ Parse *pParse = pWInfo->pParse; /* Parsing context */ sqlite3 *db = pParse->db; /* Database connection */ - unsigned char eOp2; /* op2 value for LIKE/REGEXP/GLOB */ + unsigned char eOp2 = 0; /* op2 value for LIKE/REGEXP/GLOB */ int nLeft; /* Number of elements on left side vector */ if( db->mallocFailed ){ @@ -130928,7 +138683,7 @@ pTerm->prereqRight = sqlite3WhereExprUsage(pMaskSet, pExpr->pRight); } pMaskSet->bVarSelect = 0; - prereqAll = sqlite3WhereExprUsage(pMaskSet, pExpr); + prereqAll = sqlite3WhereExprUsageNN(pMaskSet, pExpr); if( pMaskSet->bVarSelect ) pTerm->wtFlags |= TERM_VARSELECT; if( ExprHasProperty(pExpr, EP_FromJoin) ){ Bitmask x = sqlite3WhereGetMask(pMaskSet, pExpr->iRightJoinTable); @@ -131110,7 +138865,7 @@ } *pC = c + 1; } - zCollSeqName = noCase ? "NOCASE" : "BINARY"; + zCollSeqName = noCase ? "NOCASE" : sqlite3StrBINARY; pNewExpr1 = sqlite3ExprDup(db, pLeft, 0); pNewExpr1 = sqlite3PExpr(pParse, TK_GE, sqlite3ExprAddCollateString(pParse,pNewExpr1,zCollSeqName), @@ -131136,41 +138891,46 @@ #endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */ #ifndef SQLITE_OMIT_VIRTUALTABLE - /* Add a WO_MATCH auxiliary term to the constraint set if the - ** current expression is of the form: column MATCH expr. + /* Add a WO_AUX auxiliary term to the constraint set if the + ** current expression is of the form "column OP expr" where OP + ** is an operator that gets passed into virtual tables but which is + ** not normally optimized for ordinary tables. In other words, OP + ** is one of MATCH, LIKE, GLOB, REGEXP, !=, IS, IS NOT, or NOT NULL. ** This information is used by the xBestIndex methods of ** virtual tables. The native query optimizer does not attempt ** to do anything with MATCH functions. */ - if( pWC->op==TK_AND && isMatchOfColumn(pExpr, &eOp2) ){ - int idxNew; - Expr *pRight, *pLeft; - WhereTerm *pNewTerm; - Bitmask prereqColumn, prereqExpr; + if( pWC->op==TK_AND ){ + Expr *pRight = 0, *pLeft = 0; + int res = isAuxiliaryVtabOperator(db, pExpr, &eOp2, &pLeft, &pRight); + while( res-- > 0 ){ + int idxNew; + WhereTerm *pNewTerm; + Bitmask prereqColumn, prereqExpr; - pRight = pExpr->x.pList->a[0].pExpr; - pLeft = pExpr->x.pList->a[1].pExpr; - prereqExpr = sqlite3WhereExprUsage(pMaskSet, pRight); - prereqColumn = sqlite3WhereExprUsage(pMaskSet, pLeft); - if( (prereqExpr & prereqColumn)==0 ){ - Expr *pNewExpr; - pNewExpr = sqlite3PExpr(pParse, TK_MATCH, - 0, sqlite3ExprDup(db, pRight, 0)); - if( ExprHasProperty(pExpr, EP_FromJoin) && pNewExpr ){ - ExprSetProperty(pNewExpr, EP_FromJoin); + prereqExpr = sqlite3WhereExprUsage(pMaskSet, pRight); + prereqColumn = sqlite3WhereExprUsage(pMaskSet, pLeft); + if( (prereqExpr & prereqColumn)==0 ){ + Expr *pNewExpr; + pNewExpr = sqlite3PExpr(pParse, TK_MATCH, + 0, sqlite3ExprDup(db, pRight, 0)); + if( ExprHasProperty(pExpr, EP_FromJoin) && pNewExpr ){ + ExprSetProperty(pNewExpr, EP_FromJoin); + } + idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); + testcase( idxNew==0 ); + pNewTerm = &pWC->a[idxNew]; + pNewTerm->prereqRight = prereqExpr; + pNewTerm->leftCursor = pLeft->iTable; + pNewTerm->u.leftColumn = pLeft->iColumn; + pNewTerm->eOperator = WO_AUX; + pNewTerm->eMatchOp = eOp2; + markTermAsChild(pWC, idxNew, idxTerm); + pTerm = &pWC->a[idxTerm]; + pTerm->wtFlags |= TERM_COPIED; + pNewTerm->prereqAll = pTerm->prereqAll; } - idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); - testcase( idxNew==0 ); - pNewTerm = &pWC->a[idxNew]; - pNewTerm->prereqRight = prereqExpr; - pNewTerm->leftCursor = pLeft->iTable; - pNewTerm->u.leftColumn = pLeft->iColumn; - pNewTerm->eOperator = WO_MATCH; - pNewTerm->eMatchOp = eOp2; - markTermAsChild(pWC, idxNew, idxTerm); - pTerm = &pWC->a[idxTerm]; - pTerm->wtFlags |= TERM_COPIED; - pNewTerm->prereqAll = pTerm->prereqAll; + SWAP(Expr*, pLeft, pRight); } } #endif /* SQLITE_OMIT_VIRTUALTABLE */ @@ -131202,7 +138962,7 @@ exprAnalyze(pSrc, pWC, idxNew); } pTerm = &pWC->a[idxTerm]; - pTerm->wtFlags = TERM_CODED|TERM_VIRTUAL; /* Disable the original */ + pTerm->wtFlags |= TERM_CODED|TERM_VIRTUAL; /* Disable the original */ pTerm->eOperator = 0; } @@ -131239,6 +138999,7 @@ if( pExpr->op==TK_NOTNULL && pExpr->pLeft->op==TK_COLUMN && pExpr->pLeft->iColumn>=0 + && !ExprHasProperty(pExpr, EP_FromJoin) && OptimizationEnabled(db, SQLITE_Stat34) ){ Expr *pNewExpr; @@ -131316,6 +139077,7 @@ WhereInfo *pWInfo /* The WHERE processing context */ ){ pWC->pWInfo = pWInfo; + pWC->hasOr = 0; pWC->pOuter = 0; pWC->nTerm = 0; pWC->nSlot = ArraySize(pWC->aStatic); @@ -131352,17 +139114,18 @@ ** a bitmask indicating which tables are used in that expression ** tree. */ -SQLITE_PRIVATE Bitmask sqlite3WhereExprUsage(WhereMaskSet *pMaskSet, Expr *p){ +SQLITE_PRIVATE Bitmask sqlite3WhereExprUsageNN(WhereMaskSet *pMaskSet, Expr *p){ Bitmask mask; - if( p==0 ) return 0; - if( p->op==TK_COLUMN ){ + if( p->op==TK_COLUMN && !ExprHasProperty(p, EP_FixedCol) ){ return sqlite3WhereGetMask(pMaskSet, p->iTable); + }else if( ExprHasProperty(p, EP_TokenOnly|EP_Leaf) ){ + assert( p->op!=TK_IF_NULL_ROW ); + return 0; } mask = (p->op==TK_IF_NULL_ROW) ? sqlite3WhereGetMask(pMaskSet, p->iTable) : 0; - assert( !ExprHasProperty(p, EP_TokenOnly) ); - if( p->pLeft ) mask |= sqlite3WhereExprUsage(pMaskSet, p->pLeft); + if( p->pLeft ) mask |= sqlite3WhereExprUsageNN(pMaskSet, p->pLeft); if( p->pRight ){ - mask |= sqlite3WhereExprUsage(pMaskSet, p->pRight); + mask |= sqlite3WhereExprUsageNN(pMaskSet, p->pRight); assert( p->x.pList==0 ); }else if( ExprHasProperty(p, EP_xIsSelect) ){ if( ExprHasProperty(p, EP_VarSelect) ) pMaskSet->bVarSelect = 1; @@ -131372,6 +139135,9 @@ } return mask; } +SQLITE_PRIVATE Bitmask sqlite3WhereExprUsage(WhereMaskSet *pMaskSet, Expr *p){ + return p ? sqlite3WhereExprUsageNN(pMaskSet,p) : 0; +} SQLITE_PRIVATE Bitmask sqlite3WhereExprListUsage(WhereMaskSet *pMaskSet, ExprList *pList){ int i; Bitmask mask = 0; @@ -131425,6 +139191,7 @@ pArgs = pItem->u1.pFuncArg; if( pArgs==0 ) return; for(j=k=0; jnExpr; j++){ + Expr *pRhs; while( knCol && (pTab->aCol[k].colFlags & COLFLAG_HIDDEN)==0 ){k++;} if( k>=pTab->nCol ){ sqlite3ErrorMsg(pParse, "too many arguments on %s() - max %d", @@ -131435,9 +139202,10 @@ if( pColRef==0 ) return; pColRef->iTable = pItem->iCursor; pColRef->iColumn = k++; - pColRef->pTab = pTab; - pTerm = sqlite3PExpr(pParse, TK_EQ, pColRef, - sqlite3ExprDup(pParse->db, pArgs->a[j].pExpr, 0)); + pColRef->y.pTab = pTab; + pRhs = sqlite3PExpr(pParse, TK_UPLUS, + sqlite3ExprDup(pParse->db, pArgs->a[j].pExpr, 0), 0); + pTerm = sqlite3PExpr(pParse, TK_EQ, pColRef, pRhs); whereClauseInsert(pWC, pTerm, TERM_DYNAMIC); } } @@ -131465,6 +139233,21 @@ /* #include "sqliteInt.h" */ /* #include "whereInt.h" */ +/* +** Extra information appended to the end of sqlite3_index_info but not +** visible to the xBestIndex function, at least not directly. The +** sqlite3_vtab_collation() interface knows how to reach it, however. +** +** This object is not an API and can be changed from one release to the +** next. As long as allocateIndexInfo() and sqlite3_vtab_collation() +** agree on the structure, all will be well. +*/ +typedef struct HiddenIndexInfo HiddenIndexInfo; +struct HiddenIndexInfo { + WhereClause *pWC; /* The Where clause being analyzed */ + Parse *pParse; /* The parsing context */ +}; + /* Forward declaration of methods */ static int whereLoopResize(sqlite3*, WhereLoop*, int); @@ -131498,15 +139281,38 @@ } /* -** Return TRUE if the innermost loop of the WHERE clause implementation -** returns rows in ORDER BY order for complete run of the inner loop. +** In the ORDER BY LIMIT optimization, if the inner-most loop is known +** to emit rows in increasing order, and if the last row emitted by the +** inner-most loop did not fit within the sorter, then we can skip all +** subsequent rows for the current iteration of the inner loop (because they +** will not fit in the sorter either) and continue with the second inner +** loop - the loop immediately outside the inner-most. ** -** Across multiple iterations of outer loops, the output rows need not be -** sorted. As long as rows are sorted for just the innermost loop, this -** routine can return TRUE. +** When a row does not fit in the sorter (because the sorter already +** holds LIMIT+OFFSET rows that are smaller), then a jump is made to the +** label returned by this function. +** +** If the ORDER BY LIMIT optimization applies, the jump destination should +** be the continuation for the second-inner-most loop. If the ORDER BY +** LIMIT optimization does not apply, then the jump destination should +** be the continuation for the inner-most loop. +** +** It is always safe for this routine to return the continuation of the +** inner-most loop, in the sense that a correct answer will result. +** Returning the continuation the second inner loop is an optimization +** that might make the code run a little faster, but should not change +** the final answer. */ -SQLITE_PRIVATE int sqlite3WhereOrderedInnerLoop(WhereInfo *pWInfo){ - return pWInfo->bOrderedInnerLoop; +SQLITE_PRIVATE int sqlite3WhereOrderByLimitOptLabel(WhereInfo *pWInfo){ + WhereLevel *pInner; + if( !pWInfo->bOrderedInnerLoop ){ + /* The ORDER BY LIMIT optimization does not apply. Jump to the + ** continuation of the inner-most loop. */ + return pWInfo->iContinue; + } + pInner = &pWInfo->a[pWInfo->nLevel-1]; + assert( pInner->addrNxt!=0 ); + return pInner->addrNxt; } /* @@ -131849,8 +139655,8 @@ && p->iColumn==pIdx->aiColumn[iCol] && p->iTable==iBase ){ - CollSeq *pColl = sqlite3ExprCollSeq(pParse, pList->a[i].pExpr); - if( pColl && 0==sqlite3StrICmp(pColl->zName, zColl) ){ + CollSeq *pColl = sqlite3ExprNNCollSeq(pParse, pList->a[i].pExpr); + if( 0==sqlite3StrICmp(pColl->zName, zColl) ){ return i; } } @@ -132233,7 +140039,6 @@ VdbeComment((v, "for %s", pTable->zName)); /* Fill the automatic index with content */ - sqlite3ExprCachePush(pParse); pTabItem = &pWC->pWInfo->pTabList->a[pLevel->iFrom]; if( pTabItem->fg.viaCoroutine ){ int regYield = pTabItem->regReturn; @@ -132241,7 +140046,7 @@ sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, pTabItem->addrFillSub); addrTop = sqlite3VdbeAddOp1(v, OP_Yield, regYield); VdbeCoverage(v); - VdbeComment((v, "next row of \"%s\"", pTabItem->pTab->zName)); + VdbeComment((v, "next row of %s", pTabItem->pTab->zName)); }else{ addrTop = sqlite3VdbeAddOp1(v, OP_Rewind, pLevel->iTabCur); VdbeCoverage(v); } @@ -132263,7 +140068,6 @@ translateColumnToCopy(pParse, addrTop, pLevel->iTabCur, pTabItem->regResult, 1); sqlite3VdbeGoto(v, addrTop); - pTabItem->fg.viaCoroutine = 0; }else{ sqlite3VdbeAddOp2(v, OP_Next, pLevel->iTabCur, addrTop+1); VdbeCoverage(v); } @@ -132270,7 +140074,6 @@ sqlite3VdbeChangeP5(v, SQLITE_STMTSTATUS_AUTOINDEX); sqlite3VdbeJumpHere(v, addrTop); sqlite3ReleaseTempReg(pParse, regRecord); - sqlite3ExprCachePop(pParse); /* Jump here when skipping the initialization */ sqlite3VdbeJumpHere(v, addrInit); @@ -132287,11 +140090,11 @@ ** by passing the pointer returned by this function to sqlite3_free(). */ static sqlite3_index_info *allocateIndexInfo( - Parse *pParse, - WhereClause *pWC, + Parse *pParse, /* The parsing context */ + WhereClause *pWC, /* The WHERE clause being analyzed */ Bitmask mUnusable, /* Ignore terms with these prereqs */ - struct SrcList_item *pSrc, - ExprList *pOrderBy, + struct SrcList_item *pSrc, /* The FROM clause term that is the vtab */ + ExprList *pOrderBy, /* The ORDER BY clause */ u16 *pmNoOmit /* Mask of terms not to omit */ ){ int i, j; @@ -132299,6 +140102,7 @@ struct sqlite3_index_constraint *pIdxCons; struct sqlite3_index_orderby *pIdxOrderBy; struct sqlite3_index_constraint_usage *pUsage; + struct HiddenIndexInfo *pHidden; WhereTerm *pTerm; int nOrderBy; sqlite3_index_info *pIdxInfo; @@ -132314,7 +140118,7 @@ testcase( pTerm->eOperator & WO_ISNULL ); testcase( pTerm->eOperator & WO_IS ); testcase( pTerm->eOperator & WO_ALL ); - if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV|WO_IS))==0 ) continue; + if( (pTerm->eOperator & ~(WO_EQUIV))==0 ) continue; if( pTerm->wtFlags & TERM_VNULL ) continue; assert( pTerm->u.leftColumn>=(-1) ); nTerm++; @@ -132340,7 +140144,7 @@ */ pIdxInfo = sqlite3DbMallocZero(pParse->db, sizeof(*pIdxInfo) + (sizeof(*pIdxCons) + sizeof(*pUsage))*nTerm - + sizeof(*pIdxOrderBy)*nOrderBy ); + + sizeof(*pIdxOrderBy)*nOrderBy + sizeof(*pHidden) ); if( pIdxInfo==0 ){ sqlite3ErrorMsg(pParse, "out of memory"); return 0; @@ -132351,7 +140155,8 @@ ** changing them. We have to do some funky casting in order to ** initialize those fields. */ - pIdxCons = (struct sqlite3_index_constraint*)&pIdxInfo[1]; + pHidden = (struct HiddenIndexInfo*)&pIdxInfo[1]; + pIdxCons = (struct sqlite3_index_constraint*)&pHidden[1]; pIdxOrderBy = (struct sqlite3_index_orderby*)&pIdxCons[nTerm]; pUsage = (struct sqlite3_index_constraint_usage*)&pIdxOrderBy[nOrderBy]; *(int*)&pIdxInfo->nConstraint = nTerm; @@ -132361,8 +140166,10 @@ *(struct sqlite3_index_constraint_usage**)&pIdxInfo->aConstraintUsage = pUsage; + pHidden->pWC = pWC; + pHidden->pParse = pParse; for(i=j=0, pTerm=pWC->a; inTerm; i++, pTerm++){ - u8 op; + u16 op; if( pTerm->leftCursor != pSrc->iCursor ) continue; if( pTerm->prereqRight & mUnusable ) continue; assert( IsPowerOfTwo(pTerm->eOperator & ~WO_EQUIV) ); @@ -132370,34 +140177,54 @@ testcase( pTerm->eOperator & WO_IS ); testcase( pTerm->eOperator & WO_ISNULL ); testcase( pTerm->eOperator & WO_ALL ); - if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV|WO_IS))==0 ) continue; + if( (pTerm->eOperator & ~(WO_EQUIV))==0 ) continue; if( pTerm->wtFlags & TERM_VNULL ) continue; + if( (pSrc->fg.jointype & JT_LEFT)!=0 + && !ExprHasProperty(pTerm->pExpr, EP_FromJoin) + && (pTerm->eOperator & (WO_IS|WO_ISNULL)) + ){ + /* An "IS" term in the WHERE clause where the virtual table is the rhs + ** of a LEFT JOIN. Do not pass this term to the virtual table + ** implementation, as this can lead to incorrect results from SQL such + ** as: + ** + ** "LEFT JOIN vtab WHERE vtab.col IS NULL" */ + testcase( pTerm->eOperator & WO_ISNULL ); + testcase( pTerm->eOperator & WO_IS ); + continue; + } assert( pTerm->u.leftColumn>=(-1) ); pIdxCons[j].iColumn = pTerm->u.leftColumn; pIdxCons[j].iTermOffset = i; - op = (u8)pTerm->eOperator & WO_ALL; + op = pTerm->eOperator & WO_ALL; if( op==WO_IN ) op = WO_EQ; - if( op==WO_MATCH ){ - op = pTerm->eMatchOp; - } - pIdxCons[j].op = op; - /* The direct assignment in the previous line is possible only because - ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The - ** following asserts verify this fact. */ - assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ ); - assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT ); - assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE ); - assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT ); - assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE ); - assert( WO_MATCH==SQLITE_INDEX_CONSTRAINT_MATCH ); - assert( pTerm->eOperator & (WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_MATCH) ); + if( op==WO_AUX ){ + pIdxCons[j].op = pTerm->eMatchOp; + }else if( op & (WO_ISNULL|WO_IS) ){ + if( op==WO_ISNULL ){ + pIdxCons[j].op = SQLITE_INDEX_CONSTRAINT_ISNULL; + }else{ + pIdxCons[j].op = SQLITE_INDEX_CONSTRAINT_IS; + } + }else{ + pIdxCons[j].op = (u8)op; + /* The direct assignment in the previous line is possible only because + ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The + ** following asserts verify this fact. */ + assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ ); + assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT ); + assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE ); + assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT ); + assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE ); + assert( pTerm->eOperator&(WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_AUX) ); - if( op & (WO_LT|WO_LE|WO_GT|WO_GE) - && sqlite3ExprIsVector(pTerm->pExpr->pRight) - ){ - if( i<16 ) mNoOmit |= (1 << i); - if( op==WO_LT ) pIdxCons[j].op = WO_LE; - if( op==WO_GT ) pIdxCons[j].op = WO_GE; + if( op & (WO_LT|WO_LE|WO_GT|WO_GE) + && sqlite3ExprIsVector(pTerm->pExpr->pRight) + ){ + if( i<16 ) mNoOmit |= (1 << i); + if( op==WO_LT ) pIdxCons[j].op = WO_LE; + if( op==WO_GT ) pIdxCons[j].op = WO_GE; + } } j++; @@ -132418,9 +140245,11 @@ ** method of the virtual table with the sqlite3_index_info object that ** comes in as the 3rd argument to this function. ** -** If an error occurs, pParse is populated with an error message and a -** non-zero value is returned. Otherwise, 0 is returned and the output -** part of the sqlite3_index_info structure is left populated. +** If an error occurs, pParse is populated with an error message and an +** appropriate error code is returned. A return of SQLITE_CONSTRAINT from +** xBestIndex is not considered an error. SQLITE_CONSTRAINT indicates that +** the current configuration of "unusable" flags in sqlite3_index_info can +** not result in a valid plan. ** ** Whether or not an error is returned, it is the responsibility of the ** caller to eventually free p->idxStr if p->needToFreeIdxStr indicates @@ -132434,7 +140263,7 @@ rc = pVtab->pModule->xBestIndex(pVtab, p); TRACE_IDX_OUTPUTS(p); - if( rc!=SQLITE_OK ){ + if( rc!=SQLITE_OK && rc!=SQLITE_CONSTRAINT ){ if( rc==SQLITE_NOMEM ){ sqlite3OomFault(pParse->db); }else if( !pVtab->zErrMsg ){ @@ -132445,19 +140274,7 @@ } sqlite3_free(pVtab->zErrMsg); pVtab->zErrMsg = 0; - -#if 0 - /* This error is now caught by the caller. - ** Search for "xBestIndex malfunction" below */ - for(i=0; inConstraint; i++){ - if( !p->aConstraint[i].usable && p->aConstraintUsage[i].argvIndex>0 ){ - sqlite3ErrorMsg(pParse, - "table %s: xBestIndex returned an invalid plan", pTab->zName); - } - } -#endif - - return pParse->nErr; + return rc; } #endif /* !defined(SQLITE_OMIT_VIRTUALTABLE) */ @@ -132857,7 +140674,9 @@ Index *p = pLoop->u.btree.pIndex; int nEq = pLoop->u.btree.nEq; - if( p->nSample>0 && nEqnSampleCol ){ + if( p->nSample>0 && nEqnSampleCol + && OptimizationEnabled(pParse->db, SQLITE_Stat34) + ){ if( nEq==pBuilder->nRecValid ){ UnpackedRecord *pRec = pBuilder->pRec; tRowcnt a[2]; @@ -133303,22 +141122,21 @@ ** Free a WhereInfo structure */ static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){ - if( ALWAYS(pWInfo) ){ - int i; - for(i=0; inLevel; i++){ - WhereLevel *pLevel = &pWInfo->a[i]; - if( pLevel->pWLoop && (pLevel->pWLoop->wsFlags & WHERE_IN_ABLE) ){ - sqlite3DbFree(db, pLevel->u.in.aInLoop); - } + int i; + assert( pWInfo!=0 ); + for(i=0; inLevel; i++){ + WhereLevel *pLevel = &pWInfo->a[i]; + if( pLevel->pWLoop && (pLevel->pWLoop->wsFlags & WHERE_IN_ABLE) ){ + sqlite3DbFree(db, pLevel->u.in.aInLoop); } - sqlite3WhereClauseClear(&pWInfo->sWC); - while( pWInfo->pLoops ){ - WhereLoop *p = pWInfo->pLoops; - pWInfo->pLoops = p->pNextLoop; - whereLoopDelete(db, p); - } - sqlite3DbFreeNN(db, pWInfo); } + sqlite3WhereClauseClear(&pWInfo->sWC); + while( pWInfo->pLoops ){ + WhereLoop *p = pWInfo->pLoops; + pWInfo->pLoops = p->pNextLoop; + whereLoopDelete(db, p); + } + sqlite3DbFreeNN(db, pWInfo); } /* @@ -133325,18 +141143,19 @@ ** Return TRUE if all of the following are true: ** ** (1) X has the same or lower cost that Y -** (2) X is a proper subset of Y -** (3) X skips at least as many columns as Y +** (2) X uses fewer WHERE clause terms than Y +** (3) Every WHERE clause term used by X is also used by Y +** (4) X skips at least as many columns as Y +** (5) If X is a covering index, than Y is too ** -** By "proper subset" we mean that X uses fewer WHERE clause terms -** than Y and that every WHERE clause term used by X is also used -** by Y. -** +** Conditions (2) and (3) mean that X is a "proper subset" of Y. ** If X is a proper subset of Y then Y is a better choice and ought ** to have a lower cost. This routine returns TRUE when that cost -** relationship is inverted and needs to be adjusted. The third rule +** relationship is inverted and needs to be adjusted. Constraint (4) ** was added because if X uses skip-scan less than Y it still might -** deserve a lower cost even if it is a proper subset of Y. +** deserve a lower cost even if it is a proper subset of Y. Constraint (5) +** was added because a covering index probably deserves to have a lower cost +** than a non-covering index even if it is a proper subset. */ static int whereLoopCheaperProperSubset( const WhereLoop *pX, /* First WhereLoop to compare */ @@ -133358,6 +141177,10 @@ } if( j<0 ) return 0; /* X not a subset of Y since term X[i] not used by Y */ } + if( (pX->wsFlags&WHERE_IDX_ONLY)!=0 + && (pY->wsFlags&WHERE_IDX_ONLY)==0 ){ + return 0; /* Constraint (5) */ + } return 1; /* All conditions meet */ } @@ -133506,6 +141329,14 @@ sqlite3 *db = pWInfo->pParse->db; int rc; + /* Stop the search once we hit the query planner search limit */ + if( pBuilder->iPlanLimit==0 ){ + WHERETRACE(0xffffffff,("=== query planner search limit reached ===\n")); + if( pBuilder->pOrSet ) pBuilder->pOrSet->n = 0; + return SQLITE_DONE; + } + pBuilder->iPlanLimit--; + /* If pBuilder->pOrSet is defined, then only keep track of the costs ** and prereqs. */ @@ -133790,8 +141621,8 @@ pNew = pBuilder->pNew; if( db->mallocFailed ) return SQLITE_NOMEM_BKPT; - WHERETRACE(0x800, ("BEGIN addBtreeIdx(%s), nEq=%d\n", - pProbe->zName, pNew->u.btree.nEq)); + WHERETRACE(0x800, ("BEGIN %s.addBtreeIdx(%s), nEq=%d\n", + pProbe->pTable->zName,pProbe->zName, pNew->u.btree.nEq)); assert( (pNew->wsFlags & WHERE_VIRTUALTABLE)==0 ); assert( (pNew->wsFlags & WHERE_TOP_LIMIT)==0 ); @@ -133837,15 +141668,12 @@ ** to mix with a lower range bound from some other source */ if( pTerm->wtFlags & TERM_LIKEOPT && pTerm->eOperator==WO_LT ) continue; - /* Do not allow IS constraints from the WHERE clause to be used by the + /* Do not allow constraints from the WHERE clause to be used by the ** right table of a LEFT JOIN. Only constraints in the ON clause are ** allowed */ if( (pSrc->fg.jointype & JT_LEFT)!=0 && !ExprHasProperty(pTerm->pExpr, EP_FromJoin) - && (eOp & (WO_IS|WO_ISNULL))!=0 ){ - testcase( eOp & WO_IS ); - testcase( eOp & WO_ISNULL ); continue; } @@ -133871,7 +141699,6 @@ if( eOp & WO_IN ){ Expr *pExpr = pTerm->pExpr; - pNew->wsFlags |= WHERE_COLUMN_IN; if( ExprHasProperty(pExpr, EP_xIsSelect) ){ /* "x IN (SELECT ...)": TUNING: the SELECT returns 25 rows */ int i; @@ -133891,17 +141718,55 @@ assert( nIn>0 ); /* RHS always has 2 or more terms... The parser ** changes "x IN (?)" into "x=?". */ } + if( pProbe->hasStat1 ){ + LogEst M, logK, safetyMargin; + /* Let: + ** N = the total number of rows in the table + ** K = the number of entries on the RHS of the IN operator + ** M = the number of rows in the table that match terms to the + ** to the left in the same index. If the IN operator is on + ** the left-most index column, M==N. + ** + ** Given the definitions above, it is better to omit the IN operator + ** from the index lookup and instead do a scan of the M elements, + ** testing each scanned row against the IN operator separately, if: + ** + ** M*log(K) < K*log(N) + ** + ** Our estimates for M, K, and N might be inaccurate, so we build in + ** a safety margin of 2 (LogEst: 10) that favors using the IN operator + ** with the index, as using an index has better worst-case behavior. + ** If we do not have real sqlite_stat1 data, always prefer to use + ** the index. + */ + M = pProbe->aiRowLogEst[saved_nEq]; + logK = estLog(nIn); + safetyMargin = 10; /* TUNING: extra weight for indexed IN */ + if( M + logK + safetyMargin < nIn + rLogSize ){ + WHERETRACE(0x40, + ("Scan preferred over IN operator on column %d of \"%s\" (%d<%d)\n", + saved_nEq, pProbe->zName, M+logK+10, nIn+rLogSize)); + continue; + }else{ + WHERETRACE(0x40, + ("IN operator preferred on column %d of \"%s\" (%d>=%d)\n", + saved_nEq, pProbe->zName, M+logK+10, nIn+rLogSize)); + } + } + pNew->wsFlags |= WHERE_COLUMN_IN; }else if( eOp & (WO_EQ|WO_IS) ){ int iCol = pProbe->aiColumn[saved_nEq]; pNew->wsFlags |= WHERE_COLUMN_EQ; assert( saved_nEq==pNew->u.btree.nEq ); if( iCol==XN_ROWID - || (iCol>0 && nInMul==0 && saved_nEq==pProbe->nKeyCol-1) + || (iCol>=0 && nInMul==0 && saved_nEq==pProbe->nKeyCol-1) ){ - if( iCol>=0 && pProbe->uniqNotNull==0 ){ + if( iCol==XN_ROWID || pProbe->uniqNotNull + || (pProbe->nKeyCol==1 && pProbe->onError && eOp==WO_EQ) + ){ + pNew->wsFlags |= WHERE_ONEROW; + }else{ pNew->wsFlags |= WHERE_UNQ_WANTED; - }else{ - pNew->wsFlags |= WHERE_ONEROW; } } }else if( eOp & WO_ISNULL ){ @@ -133967,6 +141832,7 @@ && pProbe->nSample && pNew->u.btree.nEq<=pProbe->nSampleCol && ((eOp & WO_IN)==0 || !ExprHasProperty(pTerm->pExpr, EP_xIsSelect)) + && OptimizationEnabled(db, SQLITE_Stat34) ){ Expr *pExpr = pTerm->pExpr; if( (eOp & (WO_EQ|WO_ISNULL|WO_IS))!=0 ){ @@ -134055,6 +141921,7 @@ if( saved_nEq==saved_nSkip && saved_nEq+1nKeyCol && pProbe->noSkipScan==0 + && OptimizationEnabled(db, SQLITE_SkipScan) && pProbe->aiRowLogEst[saved_nEq+1]>=42 /* TUNING: Minimum for skip-scan */ && (rc = whereLoopResize(db, pNew, pNew->nLTerm+1))==SQLITE_OK ){ @@ -134075,8 +141942,8 @@ pNew->wsFlags = saved_wsFlags; } - WHERETRACE(0x800, ("END addBtreeIdx(%s), nEq=%d, rc=%d\n", - pProbe->zName, saved_nEq, rc)); + WHERETRACE(0x800, ("END %s.addBtreeIdx(%s), nEq=%d, rc=%d\n", + pProbe->pTable->zName, pProbe->zName, saved_nEq, rc)); return rc; } @@ -134109,7 +141976,7 @@ }else if( (aColExpr = pIndex->aColExpr)!=0 ){ for(jj=0; jjnKeyCol; jj++){ if( pIndex->aiColumn[jj]!=XN_EXPR ) continue; - if( sqlite3ExprCompare(0, pExpr,aColExpr->a[jj].pExpr,iCursor)==0 ){ + if( sqlite3ExprCompareSkip(pExpr,aColExpr->a[jj].pExpr,iCursor)==0 ){ return 1; } } @@ -134118,24 +141985,6 @@ return 0; } -/* -** Return a bitmask where 1s indicate that the corresponding column of -** the table is used by an index. Only the first 63 columns are considered. -*/ -static Bitmask columnsInIndex(Index *pIdx){ - Bitmask m = 0; - int j; - for(j=pIdx->nColumn-1; j>=0; j--){ - int x = pIdx->aiColumn[j]; - if( x>=0 ){ - testcase( x==BMS-1 ); - testcase( x==BMS-2 ); - if( xrSetup = rLogSize + rSize + 4; + pNew->rSetup = rLogSize + rSize; if( pTab->pSelect==0 && (pTab->tabFlags & TF_Ephemeral)==0 ){ - pNew->rSetup += 24; + pNew->rSetup += 28; + }else{ + pNew->rSetup -= 10; } ApplyCostMultiplier(pNew->rSetup, pTab->costMult); if( pNew->rSetup<0 ) pNew->rSetup = 0; @@ -134305,14 +142156,17 @@ } #endif /* SQLITE_OMIT_AUTOMATIC_INDEX */ - /* Loop over all indices - */ - for(; rc==SQLITE_OK && pProbe; pProbe=pProbe->pNext, iSortIdx++){ + /* Loop over all indices. If there was an INDEXED BY clause, then only + ** consider index pProbe. */ + for(; rc==SQLITE_OK && pProbe; + pProbe=(pSrc->pIBIndex ? 0 : pProbe->pNext), iSortIdx++ + ){ if( pProbe->pPartIdxWhere!=0 && !whereUsablePartialIndex(pSrc->iCursor, pWC, pProbe->pPartIdxWhere) ){ testcase( pNew->iTab!=pSrc->iCursor ); /* See ticket [98d973b8f5] */ continue; /* Partial index inappropriate for this query */ } + if( pProbe->bNoQuery ) continue; rSize = pProbe->aiRowLogEst[0]; pNew->u.btree.nEq = 0; pNew->u.btree.nBtm = 0; @@ -134346,7 +142200,7 @@ pNew->wsFlags = WHERE_IDX_ONLY | WHERE_INDEXED; m = 0; }else{ - m = pSrc->colUsed & ~columnsInIndex(pProbe); + m = pSrc->colUsed & pProbe->colNotIdxed; pNew->wsFlags = (m==0) ? (WHERE_IDX_ONLY|WHERE_INDEXED) : WHERE_INDEXED; } @@ -134417,10 +142271,6 @@ pBuilder->nRecValid = 0; pBuilder->pRec = 0; #endif - - /* If there was an INDEXED BY clause, then only that one index is - ** considered. */ - if( pSrc->pIBIndex ) break; } return rc; } @@ -134497,7 +142347,17 @@ /* Invoke the virtual table xBestIndex() method */ rc = vtabBestIndex(pParse, pSrc->pTab, pIdxInfo); - if( rc ) return rc; + if( rc ){ + if( rc==SQLITE_CONSTRAINT ){ + /* If the xBestIndex method returns SQLITE_CONSTRAINT, that means + ** that the particular combination of parameters provided is unusable. + ** Make no entries in the loop table. + */ + WHERETRACE(0xffff, (" ^^^^--- non-viable plan rejected!\n")); + return SQLITE_OK; + } + return rc; + } mxTerm = -1; assert( pNew->nLSlot>=nConstraint ); @@ -134515,9 +142375,9 @@ || pNew->aLTerm[iTerm]!=0 || pIdxCons->usable==0 ){ - rc = SQLITE_ERROR; sqlite3ErrorMsg(pParse,"%s.xBestIndex malfunction",pSrc->pTab->zName); - return rc; + testcase( pIdxInfo->needToFreeIdxStr ); + return SQLITE_ERROR; } testcase( iTerm==nConstraint-1 ); testcase( j==0 ); @@ -134545,6 +142405,15 @@ pNew->u.vtab.omitMask &= ~mNoOmit; pNew->nLTerm = mxTerm+1; + for(i=0; i<=mxTerm; i++){ + if( pNew->aLTerm[i]==0 ){ + /* The non-zero argvIdx values must be contiguous. Raise an + ** error if they are not */ + sqlite3ErrorMsg(pParse,"%s.xBestIndex malfunction",pSrc->pTab->zName); + testcase( pIdxInfo->needToFreeIdxStr ); + return SQLITE_ERROR; + } + } assert( pNew->nLTerm<=pNew->nLSlot ); pNew->u.vtab.idxNum = pIdxInfo->idxNum; pNew->u.vtab.needFree = pIdxInfo->needToFreeIdxStr; @@ -134575,6 +142444,27 @@ return rc; } +/* +** If this function is invoked from within an xBestIndex() callback, it +** returns a pointer to a buffer containing the name of the collation +** sequence associated with element iCons of the sqlite3_index_info.aConstraint +** array. Or, if iCons is out of range or there is no active xBestIndex +** call, return NULL. +*/ +SQLITE_API const char *sqlite3_vtab_collation(sqlite3_index_info *pIdxInfo, int iCons){ + HiddenIndexInfo *pHidden = (HiddenIndexInfo*)&pIdxInfo[1]; + const char *zRet = 0; + if( iCons>=0 && iConsnConstraint ){ + CollSeq *pC = 0; + int iTerm = pIdxInfo->aConstraint[iCons].iTermOffset; + Expr *pX = pHidden->pWC->a[iTerm].pExpr; + if( pX->pLeft ){ + pC = sqlite3BinaryCompareCollSeq(pHidden->pParse, pX->pLeft, pX->pRight); + } + zRet = (pC ? pC->zName : sqlite3StrBINARY); + } + return zRet; +} /* ** Add all WhereLoop objects for a table of the join identified by @@ -134639,6 +142529,7 @@ } /* First call xBestIndex() with all constraints usable. */ + WHERETRACE(0x800, ("BEGIN %s.addVirtual()\n", pSrc->pTab->zName)); WHERETRACE(0x40, (" VirtualOne: all usable\n")); rc = whereLoopAddVirtualOne(pBuilder, mPrereq, ALLBITS, 0, p, mNoOmit, &bIn); @@ -134714,6 +142605,7 @@ if( p->needToFreeIdxStr ) sqlite3_free(p->idxStr); sqlite3DbFreeNN(pParse->db, p); + WHERETRACE(0x800, ("END %s.addVirtual(), rc=%d\n", pSrc->pTab->zName, rc)); return rc; } #endif /* SQLITE_OMIT_VIRTUALTABLE */ @@ -134861,9 +142753,11 @@ /* Loop over the tables in the join, from left to right */ pNew = pBuilder->pNew; whereLoopInit(pNew); + pBuilder->iPlanLimit = SQLITE_QUERY_PLANNER_LIMIT; for(iTab=0, pItem=pTabList->a; pItemiTab = iTab; + pBuilder->iPlanLimit += SQLITE_QUERY_PLANNER_LIMIT_INCR; pNew->maskSelf = sqlite3WhereGetMask(&pWInfo->sMaskSet, pItem->iCursor); if( ((pItem->fg.jointype|priorJointype) & (JT_LEFT|JT_CROSS))!=0 ){ /* This condition is true when pItem is the FROM clause term on the @@ -134885,11 +142779,19 @@ { rc = whereLoopAddBtree(pBuilder, mPrereq); } - if( rc==SQLITE_OK ){ + if( rc==SQLITE_OK && pBuilder->pWC->hasOr ){ rc = whereLoopAddOr(pBuilder, mPrereq, mUnusable); } mPrior |= pNew->maskSelf; - if( rc || db->mallocFailed ) break; + if( rc || db->mallocFailed ){ + if( rc==SQLITE_DONE ){ + /* We hit the query planner search limit set by iPlanLimit */ + sqlite3_log(SQLITE_WARNING, "abbreviated query algorithm search"); + rc = SQLITE_OK; + }else{ + break; + } + } } whereLoopClear(db, pNew); @@ -135019,14 +142921,10 @@ if( j>=pLoop->nLTerm ) continue; } if( (pTerm->eOperator&(WO_EQ|WO_IS))!=0 && pOBExpr->iColumn>=0 ){ - const char *z1, *z2; - pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); - if( !pColl ) pColl = db->pDfltColl; - z1 = pColl->zName; - pColl = sqlite3ExprCollSeq(pWInfo->pParse, pTerm->pExpr); - if( !pColl ) pColl = db->pDfltColl; - z2 = pColl->zName; - if( sqlite3StrICmp(z1, z2)!=0 ) continue; + if( sqlite3ExprCollSeqMatch(pWInfo->pParse, + pOrderBy->a[i].pExpr, pTerm->pExpr)==0 ){ + continue; + } testcase( pTerm->pExpr->op==TK_IS ); } obSat |= MASKBIT(i); @@ -135098,7 +142996,7 @@ if( pIndex ){ iColumn = pIndex->aiColumn[j]; revIdx = pIndex->aSortOrder[j]; - if( iColumn==pIndex->pTable->iPKey ) iColumn = -1; + if( iColumn==pIndex->pTable->iPKey ) iColumn = XN_ROWID; }else{ iColumn = XN_ROWID; revIdx = 0; @@ -135125,19 +143023,18 @@ testcase( wctrlFlags & WHERE_GROUPBY ); testcase( wctrlFlags & WHERE_DISTINCTBY ); if( (wctrlFlags & (WHERE_GROUPBY|WHERE_DISTINCTBY))==0 ) bOnce = 0; - if( iColumn>=(-1) ){ + if( iColumn>=XN_ROWID ){ if( pOBExpr->op!=TK_COLUMN ) continue; if( pOBExpr->iTable!=iCur ) continue; if( pOBExpr->iColumn!=iColumn ) continue; }else{ - if( sqlite3ExprCompare(0, - pOBExpr,pIndex->aColExpr->a[j].pExpr,iCur) ){ + Expr *pIdxExpr = pIndex->aColExpr->a[j].pExpr; + if( sqlite3ExprCompareSkip(pOBExpr, pIdxExpr, iCur) ){ continue; } } - if( iColumn>=0 ){ - pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); - if( !pColl ) pColl = db->pDfltColl; + if( iColumn!=XN_ROWID ){ + pColl = sqlite3ExprNNCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); if( sqlite3StrICmp(pColl->zName, pIndex->azColl[j])!=0 ) continue; } pLoop->u.btree.nIdxCol = j+1; @@ -135397,12 +143294,15 @@ if( (pWLoop->prereq & ~pFrom->maskLoop)!=0 ) continue; if( (pWLoop->maskSelf & pFrom->maskLoop)!=0 ) continue; - if( (pWLoop->wsFlags & WHERE_AUTO_INDEX)!=0 && pFrom->nRow<10 ){ + if( (pWLoop->wsFlags & WHERE_AUTO_INDEX)!=0 && pFrom->nRow<3 ){ /* Do not use an automatic index if the this loop is expected - ** to run less than 2 times. */ + ** to run less than 1.25 times. It is tempting to also exclude + ** automatic index usage on an outer loop, but sometimes an automatic + ** index is useful in the outer loop of a correlated subquery. */ assert( 10==sqlite3LogEst(2) ); continue; } + /* At this point, pWLoop is a candidate to be the next loop. ** Compute its cost */ rUnsorted = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow); @@ -135422,7 +143322,11 @@ pWInfo, nRowEst, nOrderBy, isOrdered ); } - rCost = sqlite3LogEstAdd(rUnsorted, aSortCost[isOrdered]); + /* TUNING: Add a small extra penalty (5) to sorting as an + ** extra encouragment to the query planner to select a plan + ** where the rows emerge in the correct order without any sorting + ** required. */ + rCost = sqlite3LogEstAdd(rUnsorted, aSortCost[isOrdered]) + 5; WHERETRACE(0x002, ("---- sort cost=%-3d (%d/%d) increases cost %3d to %-3d\n", @@ -135612,6 +143516,7 @@ pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; } } + pWInfo->bOrderedInnerLoop = 0; if( pWInfo->pOrderBy ){ if( pWInfo->wctrlFlags & WHERE_DISTINCTBY ){ if( pFrom->isOrdered==pWInfo->pOrderBy->nExpr ){ @@ -135723,7 +143628,7 @@ } if( j!=pIdx->nKeyCol ) continue; pLoop->wsFlags = WHERE_COLUMN_EQ|WHERE_ONEROW|WHERE_INDEXED; - if( pIdx->isCovering || (pItem->colUsed & ~columnsInIndex(pIdx))==0 ){ + if( pIdx->isCovering || (pItem->colUsed & pIdx->colNotIdxed)==0 ){ pLoop->wsFlags |= WHERE_IDX_ONLY; } pLoop->nLTerm = j; @@ -135774,6 +143679,7 @@ memset(&w, 0, sizeof(w)); w.eCode = 1; w.xExprCallback = exprNodeIsDeterministic; + w.xSelectCallback = sqlite3SelectWalkFail; sqlite3WalkExpr(&w, p); return w.eCode; } @@ -135983,37 +143889,39 @@ if( wctrlFlags & WHERE_WANT_DISTINCT ){ pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; } - } - - /* Assign a bit from the bitmask to every term in the FROM clause. - ** - ** The N-th term of the FROM clause is assigned a bitmask of 1<nSrc tables in - ** pTabList, not just the first nTabList tables. nTabList is normally - ** equal to pTabList->nSrc but might be shortened to 1 if the - ** WHERE_OR_SUBCLAUSE flag is set. - */ - for(ii=0; iinSrc; ii++){ - createMask(pMaskSet, pTabList->a[ii].iCursor); - sqlite3WhereTabFuncArgs(pParse, &pTabList->a[ii], &pWInfo->sWC); - } -#ifdef SQLITE_DEBUG - { - Bitmask mx = 0; - for(ii=0; iinSrc; ii++){ - Bitmask m = sqlite3WhereGetMask(pMaskSet, pTabList->a[ii].iCursor); - assert( m>=mx ); - mx = m; + ExplainQueryPlan((pParse, 0, "SCAN CONSTANT ROW")); + }else{ + /* Assign a bit from the bitmask to every term in the FROM clause. + ** + ** The N-th term of the FROM clause is assigned a bitmask of 1<nSrc tables in + ** pTabList, not just the first nTabList tables. nTabList is normally + ** equal to pTabList->nSrc but might be shortened to 1 if the + ** WHERE_OR_SUBCLAUSE flag is set. + */ + ii = 0; + do{ + createMask(pMaskSet, pTabList->a[ii].iCursor); + sqlite3WhereTabFuncArgs(pParse, &pTabList->a[ii], &pWInfo->sWC); + }while( (++ii)nSrc ); + #ifdef SQLITE_DEBUG + { + Bitmask mx = 0; + for(ii=0; iinSrc; ii++){ + Bitmask m = sqlite3WhereGetMask(pMaskSet, pTabList->a[ii].iCursor); + assert( m>=mx ); + mx = m; + } } + #endif } -#endif - + /* Analyze all of the subexpressions. */ sqlite3WhereExprAnalyze(pTabList, &pWInfo->sWC); if( db->mallocFailed ) goto whereBeginError; @@ -136031,6 +143939,7 @@ */ for(ii=0; iinTerm; ii++){ WhereTerm *pT = &sWLB.pWC->a[ii]; + if( pT->wtFlags & TERM_VIRTUAL ) continue; if( pT->prereqAll==0 && (nTabList==0 || exprIsDeterministic(pT->pExpr)) ){ sqlite3ExprIfFalse(pParse, pT->pExpr, pWInfo->iBreak, SQLITE_JUMPIFNULL); pT->wtFlags |= TERM_CODED; @@ -136118,35 +144027,80 @@ } } #endif - /* Attempt to omit tables from the join that do not effect the result */ + + /* Attempt to omit tables from the join that do not affect the result. + ** For a table to not affect the result, the following must be true: + ** + ** 1) The query must not be an aggregate. + ** 2) The table must be the RHS of a LEFT JOIN. + ** 3) Either the query must be DISTINCT, or else the ON or USING clause + ** must contain a constraint that limits the scan of the table to + ** at most a single row. + ** 4) The table must not be referenced by any part of the query apart + ** from its own USING or ON clause. + ** + ** For example, given: + ** + ** CREATE TABLE t1(ipk INTEGER PRIMARY KEY, v1); + ** CREATE TABLE t2(ipk INTEGER PRIMARY KEY, v2); + ** CREATE TABLE t3(ipk INTEGER PRIMARY KEY, v3); + ** + ** then table t2 can be omitted from the following: + ** + ** SELECT v1, v3 FROM t1 + ** LEFT JOIN t2 USING (t1.ipk=t2.ipk) + ** LEFT JOIN t3 USING (t1.ipk=t3.ipk) + ** + ** or from: + ** + ** SELECT DISTINCT v1, v3 FROM t1 + ** LEFT JOIN t2 + ** LEFT JOIN t3 USING (t1.ipk=t3.ipk) + */ + notReady = ~(Bitmask)0; if( pWInfo->nLevel>=2 - && pResultSet!=0 + && pResultSet!=0 /* guarantees condition (1) above */ && OptimizationEnabled(db, SQLITE_OmitNoopJoin) ){ + int i; Bitmask tabUsed = sqlite3WhereExprListUsage(pMaskSet, pResultSet); if( sWLB.pOrderBy ){ tabUsed |= sqlite3WhereExprListUsage(pMaskSet, sWLB.pOrderBy); } - while( pWInfo->nLevel>=2 ){ + for(i=pWInfo->nLevel-1; i>=1; i--){ WhereTerm *pTerm, *pEnd; - pLoop = pWInfo->a[pWInfo->nLevel-1].pWLoop; - if( (pWInfo->pTabList->a[pLoop->iTab].fg.jointype & JT_LEFT)==0 ) break; + struct SrcList_item *pItem; + pLoop = pWInfo->a[i].pWLoop; + pItem = &pWInfo->pTabList->a[pLoop->iTab]; + if( (pItem->fg.jointype & JT_LEFT)==0 ) continue; if( (wctrlFlags & WHERE_WANT_DISTINCT)==0 && (pLoop->wsFlags & WHERE_ONEROW)==0 ){ - break; + continue; } - if( (tabUsed & pLoop->maskSelf)!=0 ) break; + if( (tabUsed & pLoop->maskSelf)!=0 ) continue; pEnd = sWLB.pWC->a + sWLB.pWC->nTerm; for(pTerm=sWLB.pWC->a; pTermprereqAll & pLoop->maskSelf)!=0 - && !ExprHasProperty(pTerm->pExpr, EP_FromJoin) - ){ - break; + if( (pTerm->prereqAll & pLoop->maskSelf)!=0 ){ + if( !ExprHasProperty(pTerm->pExpr, EP_FromJoin) + || pTerm->pExpr->iRightJoinTable!=pItem->iCursor + ){ + break; + } } } - if( pTerm drop loop %c not used\n", pLoop->cId)); + notReady &= ~pLoop->maskSelf; + for(pTerm=sWLB.pWC->a; pTermprereqAll & pLoop->maskSelf)!=0 ){ + pTerm->wtFlags |= TERM_CODED; + } + } + if( i!=pWInfo->nLevel-1 ){ + int nByte = (pWInfo->nLevel-1-i) * sizeof(WhereLevel); + memmove(&pWInfo->a[i], &pWInfo->a[i+1], nByte); + } pWInfo->nLevel--; nTabList--; } @@ -136156,15 +144110,32 @@ /* If the caller is an UPDATE or DELETE statement that is requesting ** to use a one-pass algorithm, determine if this is appropriate. + ** + ** A one-pass approach can be used if the caller has requested one + ** and either (a) the scan visits at most one row or (b) each + ** of the following are true: + ** + ** * the caller has indicated that a one-pass approach can be used + ** with multiple rows (by setting WHERE_ONEPASS_MULTIROW), and + ** * the table is not a virtual table, and + ** * either the scan does not use the OR optimization or the caller + ** is a DELETE operation (WHERE_DUPLICATES_OK is only specified + ** for DELETE). + ** + ** The last qualification is because an UPDATE statement uses + ** WhereInfo.aiCurOnePass[1] to determine whether or not it really can + ** use a one-pass approach, and this is not set accurately for scans + ** that use the OR optimization. */ assert( (wctrlFlags & WHERE_ONEPASS_DESIRED)==0 || pWInfo->nLevel==1 ); if( (wctrlFlags & WHERE_ONEPASS_DESIRED)!=0 ){ int wsFlags = pWInfo->a[0].pWLoop->wsFlags; int bOnerow = (wsFlags & WHERE_ONEROW)!=0; - if( bOnerow - || ((wctrlFlags & WHERE_ONEPASS_MULTIROW)!=0 - && 0==(wsFlags & WHERE_VIRTUALTABLE)) - ){ + if( bOnerow || ( + 0!=(wctrlFlags & WHERE_ONEPASS_MULTIROW) + && 0==(wsFlags & WHERE_VIRTUALTABLE) + && (0==(wsFlags & WHERE_MULTI_OR) || (wctrlFlags & WHERE_DUPLICATES_OK)) + )){ pWInfo->eOnePass = bOnerow ? ONEPASS_SINGLE : ONEPASS_MULTI; if( HasRowid(pTabList->a[0].pTab) && (wsFlags & WHERE_IDX_ONLY) ){ if( wctrlFlags & WHERE_ONEPASS_MULTIROW ){ @@ -136236,7 +144207,7 @@ Index *pIx = pLoop->u.btree.pIndex; int iIndexCur; int op = OP_OpenRead; - /* iAuxArg is always set if to a positive value if ONEPASS is possible */ + /* iAuxArg is always set to a positive value if ONEPASS is possible */ assert( iAuxArg!=0 || (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 ); if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIx) && (wctrlFlags & WHERE_OR_SUBCLAUSE)!=0 @@ -136301,7 +144272,6 @@ ** loop below generates code for a single nested loop of the VM ** program. */ - notReady = ~(Bitmask)0; for(ii=0; iiiFrom, wctrlFlags + pParse, pTabList, pLevel, wctrlFlags ); pLevel->addrBody = sqlite3VdbeCurrentAddr(v); notReady = sqlite3WhereCodeOneLoopStart(pWInfo, ii, notReady); @@ -136339,6 +144309,26 @@ } /* +** Part of sqlite3WhereEnd() will rewrite opcodes to reference the +** index rather than the main table. In SQLITE_DEBUG mode, we want +** to trace those changes if PRAGMA vdbe_addoptrace=on. This routine +** does that. +*/ +#ifndef SQLITE_DEBUG +# define OpcodeRewriteTrace(D,K,P) /* no-op */ +#else +# define OpcodeRewriteTrace(D,K,P) sqlite3WhereOpcodeRewriteTrace(D,K,P) + static void sqlite3WhereOpcodeRewriteTrace( + sqlite3 *db, + int pc, + VdbeOp *pOp + ){ + if( (db->flags & SQLITE_VdbeAddopTrace)==0 ) return; + sqlite3VdbePrintOp(0, pc, pOp); + } +#endif + +/* ** Generate the end of the WHERE loop. See comments on ** sqlite3WhereBegin() for additional information. */ @@ -136354,7 +144344,6 @@ /* Generate loop termination code. */ VdbeModuleComment((v, "End WHERE-core")); - sqlite3ExprCacheClear(pParse); for(i=pWInfo->nLevel-1; i>=0; i--){ int addr; pLevel = &pWInfo->a[i]; @@ -136365,6 +144354,7 @@ Index *pIdx; int n; if( pWInfo->eDistinct==WHERE_DISTINCT_ORDERED + && i==pWInfo->nLevel-1 /* Ticket [ef9318757b152e3] 2017-10-21 */ && (pLoop->wsFlags & WHERE_INDEXED)!=0 && (pIdx = pLoop->u.btree.pIndex)->hasStat1 && (n = pLoop->u.btree.nIdxCol)>0 @@ -136404,10 +144394,17 @@ for(j=pLevel->u.in.nIn, pIn=&pLevel->u.in.aInLoop[j-1]; j>0; j--, pIn--){ sqlite3VdbeJumpHere(v, pIn->addrInTop+1); if( pIn->eEndLoopOp!=OP_Noop ){ + if( pIn->nPrefix ){ + assert( pLoop->wsFlags & WHERE_IN_EARLYOUT ); + sqlite3VdbeAddOp4Int(v, OP_IfNoHope, pLevel->iIdxCur, + sqlite3VdbeCurrentAddr(v)+2, + pIn->iBase, pIn->nPrefix); + VdbeCoverage(v); + } sqlite3VdbeAddOp2(v, pIn->eEndLoopOp, pIn->iCur, pIn->addrInTop); VdbeCoverage(v); - VdbeCoverageIf(v, pIn->eEndLoopOp==OP_PrevIfOpen); - VdbeCoverageIf(v, pIn->eEndLoopOp==OP_NextIfOpen); + VdbeCoverageIf(v, pIn->eEndLoopOp==OP_Prev); + VdbeCoverageIf(v, pIn->eEndLoopOp==OP_Next); } sqlite3VdbeJumpHere(v, pIn->addrInTop-1); } @@ -136431,7 +144428,8 @@ addr = sqlite3VdbeAddOp1(v, OP_IfPos, pLevel->iLeftJoin); VdbeCoverage(v); assert( (ws & WHERE_IDX_ONLY)==0 || (ws & WHERE_INDEXED)!=0 ); if( (ws & WHERE_IDX_ONLY)==0 ){ - sqlite3VdbeAddOp1(v, OP_NullRow, pTabList->a[i].iCursor); + assert( pLevel->iTabCur==pTabList->a[pLevel->iFrom].iCursor ); + sqlite3VdbeAddOp1(v, OP_NullRow, pLevel->iTabCur); } if( (ws & WHERE_INDEXED) || ((ws & WHERE_MULTI_OR) && pLevel->u.pCovidx) @@ -136497,10 +144495,19 @@ ){ last = sqlite3VdbeCurrentAddr(v); k = pLevel->addrBody; +#ifdef SQLITE_DEBUG + if( db->flags & SQLITE_VdbeAddopTrace ){ + printf("TRANSLATE opcodes in range %d..%d\n", k, last-1); + } +#endif pOp = sqlite3VdbeGetOp(v, k); for(; kp1!=pLevel->iTabCur ) continue; - if( pOp->opcode==OP_Column ){ + if( pOp->opcode==OP_Column +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC + || pOp->opcode==OP_Offset +#endif + ){ int x = pOp->p2; assert( pIdx->pTable==pTab ); if( !HasRowid(pTab) ){ @@ -136512,6 +144519,7 @@ if( x>=0 ){ pOp->p2 = x; pOp->p1 = pLevel->iIdxCur; + OpcodeRewriteTrace(db, k, pOp); } assert( (pLoop->wsFlags & WHERE_IDX_ONLY)==0 || x>=0 || pWInfo->eOnePass ); @@ -136518,10 +144526,15 @@ }else if( pOp->opcode==OP_Rowid ){ pOp->p1 = pLevel->iIdxCur; pOp->opcode = OP_IdxRowid; + OpcodeRewriteTrace(db, k, pOp); }else if( pOp->opcode==OP_IfNullRow ){ pOp->p1 = pLevel->iIdxCur; + OpcodeRewriteTrace(db, k, pOp); } } +#ifdef SQLITE_DEBUG + if( db->flags & SQLITE_VdbeAddopTrace ) printf("TRANSLATE complete\n"); +#endif } } @@ -136533,6 +144546,2263 @@ } /************** End of where.c ***********************************************/ +/************** Begin file window.c ******************************************/ +/* +** 2018 May 08 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +*/ +/* #include "sqliteInt.h" */ + +#ifndef SQLITE_OMIT_WINDOWFUNC + +/* +** SELECT REWRITING +** +** Any SELECT statement that contains one or more window functions in +** either the select list or ORDER BY clause (the only two places window +** functions may be used) is transformed by function sqlite3WindowRewrite() +** in order to support window function processing. For example, with the +** schema: +** +** CREATE TABLE t1(a, b, c, d, e, f, g); +** +** the statement: +** +** SELECT a+1, max(b) OVER (PARTITION BY c ORDER BY d) FROM t1 ORDER BY e; +** +** is transformed to: +** +** SELECT a+1, max(b) OVER (PARTITION BY c ORDER BY d) FROM ( +** SELECT a, e, c, d, b FROM t1 ORDER BY c, d +** ) ORDER BY e; +** +** The flattening optimization is disabled when processing this transformed +** SELECT statement. This allows the implementation of the window function +** (in this case max()) to process rows sorted in order of (c, d), which +** makes things easier for obvious reasons. More generally: +** +** * FROM, WHERE, GROUP BY and HAVING clauses are all moved to +** the sub-query. +** +** * ORDER BY, LIMIT and OFFSET remain part of the parent query. +** +** * Terminals from each of the expression trees that make up the +** select-list and ORDER BY expressions in the parent query are +** selected by the sub-query. For the purposes of the transformation, +** terminals are column references and aggregate functions. +** +** If there is more than one window function in the SELECT that uses +** the same window declaration (the OVER bit), then a single scan may +** be used to process more than one window function. For example: +** +** SELECT max(b) OVER (PARTITION BY c ORDER BY d), +** min(e) OVER (PARTITION BY c ORDER BY d) +** FROM t1; +** +** is transformed in the same way as the example above. However: +** +** SELECT max(b) OVER (PARTITION BY c ORDER BY d), +** min(e) OVER (PARTITION BY a ORDER BY b) +** FROM t1; +** +** Must be transformed to: +** +** SELECT max(b) OVER (PARTITION BY c ORDER BY d) FROM ( +** SELECT e, min(e) OVER (PARTITION BY a ORDER BY b), c, d, b FROM +** SELECT a, e, c, d, b FROM t1 ORDER BY a, b +** ) ORDER BY c, d +** ) ORDER BY e; +** +** so that both min() and max() may process rows in the order defined by +** their respective window declarations. +** +** INTERFACE WITH SELECT.C +** +** When processing the rewritten SELECT statement, code in select.c calls +** sqlite3WhereBegin() to begin iterating through the results of the +** sub-query, which is always implemented as a co-routine. It then calls +** sqlite3WindowCodeStep() to process rows and finish the scan by calling +** sqlite3WhereEnd(). +** +** sqlite3WindowCodeStep() generates VM code so that, for each row returned +** by the sub-query a sub-routine (OP_Gosub) coded by select.c is invoked. +** When the sub-routine is invoked: +** +** * The results of all window-functions for the row are stored +** in the associated Window.regResult registers. +** +** * The required terminal values are stored in the current row of +** temp table Window.iEphCsr. +** +** In some cases, depending on the window frame and the specific window +** functions invoked, sqlite3WindowCodeStep() caches each entire partition +** in a temp table before returning any rows. In other cases it does not. +** This detail is encapsulated within this file, the code generated by +** select.c is the same in either case. +** +** BUILT-IN WINDOW FUNCTIONS +** +** This implementation features the following built-in window functions: +** +** row_number() +** rank() +** dense_rank() +** percent_rank() +** cume_dist() +** ntile(N) +** lead(expr [, offset [, default]]) +** lag(expr [, offset [, default]]) +** first_value(expr) +** last_value(expr) +** nth_value(expr, N) +** +** These are the same built-in window functions supported by Postgres. +** Although the behaviour of aggregate window functions (functions that +** can be used as either aggregates or window funtions) allows them to +** be implemented using an API, built-in window functions are much more +** esoteric. Additionally, some window functions (e.g. nth_value()) +** may only be implemented by caching the entire partition in memory. +** As such, some built-in window functions use the same API as aggregate +** window functions and some are implemented directly using VDBE +** instructions. Additionally, for those functions that use the API, the +** window frame is sometimes modified before the SELECT statement is +** rewritten. For example, regardless of the specified window frame, the +** row_number() function always uses: +** +** ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +** +** See sqlite3WindowUpdate() for details. +** +** As well as some of the built-in window functions, aggregate window +** functions min() and max() are implemented using VDBE instructions if +** the start of the window frame is declared as anything other than +** UNBOUNDED PRECEDING. +*/ + +/* +** Implementation of built-in window function row_number(). Assumes that the +** window frame has been coerced to: +** +** ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +*/ +static void row_numberStepFunc( + sqlite3_context *pCtx, + int nArg, + sqlite3_value **apArg +){ + i64 *p = (i64*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ) (*p)++; + UNUSED_PARAMETER(nArg); + UNUSED_PARAMETER(apArg); +} +static void row_numberValueFunc(sqlite3_context *pCtx){ + i64 *p = (i64*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + sqlite3_result_int64(pCtx, (p ? *p : 0)); +} + +/* +** Context object type used by rank(), dense_rank(), percent_rank() and +** cume_dist(). +*/ +struct CallCount { + i64 nValue; + i64 nStep; + i64 nTotal; +}; + +/* +** Implementation of built-in window function dense_rank(). Assumes that +** the window frame has been set to: +** +** RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +*/ +static void dense_rankStepFunc( + sqlite3_context *pCtx, + int nArg, + sqlite3_value **apArg +){ + struct CallCount *p; + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ) p->nStep = 1; + UNUSED_PARAMETER(nArg); + UNUSED_PARAMETER(apArg); +} +static void dense_rankValueFunc(sqlite3_context *pCtx){ + struct CallCount *p; + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ){ + if( p->nStep ){ + p->nValue++; + p->nStep = 0; + } + sqlite3_result_int64(pCtx, p->nValue); + } +} + +/* +** Implementation of built-in window function rank(). Assumes that +** the window frame has been set to: +** +** RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +*/ +static void rankStepFunc( + sqlite3_context *pCtx, + int nArg, + sqlite3_value **apArg +){ + struct CallCount *p; + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ){ + p->nStep++; + if( p->nValue==0 ){ + p->nValue = p->nStep; + } + } + UNUSED_PARAMETER(nArg); + UNUSED_PARAMETER(apArg); +} +static void rankValueFunc(sqlite3_context *pCtx){ + struct CallCount *p; + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ){ + sqlite3_result_int64(pCtx, p->nValue); + p->nValue = 0; + } +} + +/* +** Implementation of built-in window function percent_rank(). Assumes that +** the window frame has been set to: +** +** RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +*/ +static void percent_rankStepFunc( + sqlite3_context *pCtx, + int nArg, + sqlite3_value **apArg +){ + struct CallCount *p; + UNUSED_PARAMETER(nArg); assert( nArg==1 ); + + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ){ + if( p->nTotal==0 ){ + p->nTotal = sqlite3_value_int64(apArg[0]); + } + p->nStep++; + if( p->nValue==0 ){ + p->nValue = p->nStep; + } + } +} +static void percent_rankValueFunc(sqlite3_context *pCtx){ + struct CallCount *p; + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ){ + if( p->nTotal>1 ){ + double r = (double)(p->nValue-1) / (double)(p->nTotal-1); + sqlite3_result_double(pCtx, r); + }else{ + sqlite3_result_double(pCtx, 0.0); + } + p->nValue = 0; + } +} + +/* +** Implementation of built-in window function cume_dist(). Assumes that +** the window frame has been set to: +** +** RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +*/ +static void cume_distStepFunc( + sqlite3_context *pCtx, + int nArg, + sqlite3_value **apArg +){ + struct CallCount *p; + assert( nArg==1 ); UNUSED_PARAMETER(nArg); + + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ){ + if( p->nTotal==0 ){ + p->nTotal = sqlite3_value_int64(apArg[0]); + } + p->nStep++; + } +} +static void cume_distValueFunc(sqlite3_context *pCtx){ + struct CallCount *p; + p = (struct CallCount*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p && p->nTotal ){ + double r = (double)(p->nStep) / (double)(p->nTotal); + sqlite3_result_double(pCtx, r); + } +} + +/* +** Context object for ntile() window function. +*/ +struct NtileCtx { + i64 nTotal; /* Total rows in partition */ + i64 nParam; /* Parameter passed to ntile(N) */ + i64 iRow; /* Current row */ +}; + +/* +** Implementation of ntile(). This assumes that the window frame has +** been coerced to: +** +** ROWS UNBOUNDED PRECEDING AND CURRENT ROW +*/ +static void ntileStepFunc( + sqlite3_context *pCtx, + int nArg, + sqlite3_value **apArg +){ + struct NtileCtx *p; + assert( nArg==2 ); UNUSED_PARAMETER(nArg); + p = (struct NtileCtx*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p ){ + if( p->nTotal==0 ){ + p->nParam = sqlite3_value_int64(apArg[0]); + p->nTotal = sqlite3_value_int64(apArg[1]); + if( p->nParam<=0 ){ + sqlite3_result_error( + pCtx, "argument of ntile must be a positive integer", -1 + ); + } + } + p->iRow++; + } +} +static void ntileValueFunc(sqlite3_context *pCtx){ + struct NtileCtx *p; + p = (struct NtileCtx*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p && p->nParam>0 ){ + int nSize = (p->nTotal / p->nParam); + if( nSize==0 ){ + sqlite3_result_int64(pCtx, p->iRow); + }else{ + i64 nLarge = p->nTotal - p->nParam*nSize; + i64 iSmall = nLarge*(nSize+1); + i64 iRow = p->iRow-1; + + assert( (nLarge*(nSize+1) + (p->nParam-nLarge)*nSize)==p->nTotal ); + + if( iRowpVal); + p->pVal = sqlite3_value_dup(apArg[0]); + if( p->pVal==0 ){ + sqlite3_result_error_nomem(pCtx); + }else{ + p->nVal++; + } + } +} +static void last_valueInvFunc( + sqlite3_context *pCtx, + int nArg, + sqlite3_value **apArg +){ + struct LastValueCtx *p; + UNUSED_PARAMETER(nArg); + UNUSED_PARAMETER(apArg); + p = (struct LastValueCtx*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( ALWAYS(p) ){ + p->nVal--; + if( p->nVal==0 ){ + sqlite3_value_free(p->pVal); + p->pVal = 0; + } + } +} +static void last_valueValueFunc(sqlite3_context *pCtx){ + struct LastValueCtx *p; + p = (struct LastValueCtx*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p && p->pVal ){ + sqlite3_result_value(pCtx, p->pVal); + } +} +static void last_valueFinalizeFunc(sqlite3_context *pCtx){ + struct LastValueCtx *p; + p = (struct LastValueCtx*)sqlite3_aggregate_context(pCtx, sizeof(*p)); + if( p && p->pVal ){ + sqlite3_result_value(pCtx, p->pVal); + sqlite3_value_free(p->pVal); + p->pVal = 0; + } +} + +/* +** Static names for the built-in window function names. These static +** names are used, rather than string literals, so that FuncDef objects +** can be associated with a particular window function by direct +** comparison of the zName pointer. Example: +** +** if( pFuncDef->zName==row_valueName ){ ... } +*/ +static const char row_numberName[] = "row_number"; +static const char dense_rankName[] = "dense_rank"; +static const char rankName[] = "rank"; +static const char percent_rankName[] = "percent_rank"; +static const char cume_distName[] = "cume_dist"; +static const char ntileName[] = "ntile"; +static const char last_valueName[] = "last_value"; +static const char nth_valueName[] = "nth_value"; +static const char first_valueName[] = "first_value"; +static const char leadName[] = "lead"; +static const char lagName[] = "lag"; + +/* +** No-op implementations of xStep() and xFinalize(). Used as place-holders +** for built-in window functions that never call those interfaces. +** +** The noopValueFunc() is called but is expected to do nothing. The +** noopStepFunc() is never called, and so it is marked with NO_TEST to +** let the test coverage routine know not to expect this function to be +** invoked. +*/ +static void noopStepFunc( /*NO_TEST*/ + sqlite3_context *p, /*NO_TEST*/ + int n, /*NO_TEST*/ + sqlite3_value **a /*NO_TEST*/ +){ /*NO_TEST*/ + UNUSED_PARAMETER(p); /*NO_TEST*/ + UNUSED_PARAMETER(n); /*NO_TEST*/ + UNUSED_PARAMETER(a); /*NO_TEST*/ + assert(0); /*NO_TEST*/ +} /*NO_TEST*/ +static void noopValueFunc(sqlite3_context *p){ UNUSED_PARAMETER(p); /*no-op*/ } + +/* Window functions that use all window interfaces: xStep, xFinal, +** xValue, and xInverse */ +#define WINDOWFUNCALL(name,nArg,extra) { \ + nArg, (SQLITE_UTF8|SQLITE_FUNC_WINDOW|extra), 0, 0, \ + name ## StepFunc, name ## FinalizeFunc, name ## ValueFunc, \ + name ## InvFunc, name ## Name, {0} \ +} + +/* Window functions that are implemented using bytecode and thus have +** no-op routines for their methods */ +#define WINDOWFUNCNOOP(name,nArg,extra) { \ + nArg, (SQLITE_UTF8|SQLITE_FUNC_WINDOW|extra), 0, 0, \ + noopStepFunc, noopValueFunc, noopValueFunc, \ + noopStepFunc, name ## Name, {0} \ +} + +/* Window functions that use all window interfaces: xStep, the +** same routine for xFinalize and xValue and which never call +** xInverse. */ +#define WINDOWFUNCX(name,nArg,extra) { \ + nArg, (SQLITE_UTF8|SQLITE_FUNC_WINDOW|extra), 0, 0, \ + name ## StepFunc, name ## ValueFunc, name ## ValueFunc, \ + noopStepFunc, name ## Name, {0} \ +} + + +/* +** Register those built-in window functions that are not also aggregates. +*/ +SQLITE_PRIVATE void sqlite3WindowFunctions(void){ + static FuncDef aWindowFuncs[] = { + WINDOWFUNCX(row_number, 0, 0), + WINDOWFUNCX(dense_rank, 0, 0), + WINDOWFUNCX(rank, 0, 0), + WINDOWFUNCX(percent_rank, 0, SQLITE_FUNC_WINDOW_SIZE), + WINDOWFUNCX(cume_dist, 0, SQLITE_FUNC_WINDOW_SIZE), + WINDOWFUNCX(ntile, 1, SQLITE_FUNC_WINDOW_SIZE), + WINDOWFUNCALL(last_value, 1, 0), + WINDOWFUNCNOOP(nth_value, 2, 0), + WINDOWFUNCNOOP(first_value, 1, 0), + WINDOWFUNCNOOP(lead, 1, 0), + WINDOWFUNCNOOP(lead, 2, 0), + WINDOWFUNCNOOP(lead, 3, 0), + WINDOWFUNCNOOP(lag, 1, 0), + WINDOWFUNCNOOP(lag, 2, 0), + WINDOWFUNCNOOP(lag, 3, 0), + }; + sqlite3InsertBuiltinFuncs(aWindowFuncs, ArraySize(aWindowFuncs)); +} + +/* +** This function is called immediately after resolving the function name +** for a window function within a SELECT statement. Argument pList is a +** linked list of WINDOW definitions for the current SELECT statement. +** Argument pFunc is the function definition just resolved and pWin +** is the Window object representing the associated OVER clause. This +** function updates the contents of pWin as follows: +** +** * If the OVER clause refered to a named window (as in "max(x) OVER win"), +** search list pList for a matching WINDOW definition, and update pWin +** accordingly. If no such WINDOW clause can be found, leave an error +** in pParse. +** +** * If the function is a built-in window function that requires the +** window to be coerced (see "BUILT-IN WINDOW FUNCTIONS" at the top +** of this file), pWin is updated here. +*/ +SQLITE_PRIVATE void sqlite3WindowUpdate( + Parse *pParse, + Window *pList, /* List of named windows for this SELECT */ + Window *pWin, /* Window frame to update */ + FuncDef *pFunc /* Window function definition */ +){ + if( pWin->zName && pWin->eType==0 ){ + Window *p; + for(p=pList; p; p=p->pNextWin){ + if( sqlite3StrICmp(p->zName, pWin->zName)==0 ) break; + } + if( p==0 ){ + sqlite3ErrorMsg(pParse, "no such window: %s", pWin->zName); + return; + } + pWin->pPartition = sqlite3ExprListDup(pParse->db, p->pPartition, 0); + pWin->pOrderBy = sqlite3ExprListDup(pParse->db, p->pOrderBy, 0); + pWin->pStart = sqlite3ExprDup(pParse->db, p->pStart, 0); + pWin->pEnd = sqlite3ExprDup(pParse->db, p->pEnd, 0); + pWin->eStart = p->eStart; + pWin->eEnd = p->eEnd; + pWin->eType = p->eType; + } + if( pFunc->funcFlags & SQLITE_FUNC_WINDOW ){ + sqlite3 *db = pParse->db; + if( pWin->pFilter ){ + sqlite3ErrorMsg(pParse, + "FILTER clause may only be used with aggregate window functions" + ); + }else + if( pFunc->zName==row_numberName || pFunc->zName==ntileName ){ + sqlite3ExprDelete(db, pWin->pStart); + sqlite3ExprDelete(db, pWin->pEnd); + pWin->pStart = pWin->pEnd = 0; + pWin->eType = TK_ROWS; + pWin->eStart = TK_UNBOUNDED; + pWin->eEnd = TK_CURRENT; + }else + + if( pFunc->zName==dense_rankName || pFunc->zName==rankName + || pFunc->zName==percent_rankName || pFunc->zName==cume_distName + ){ + sqlite3ExprDelete(db, pWin->pStart); + sqlite3ExprDelete(db, pWin->pEnd); + pWin->pStart = pWin->pEnd = 0; + pWin->eType = TK_RANGE; + pWin->eStart = TK_UNBOUNDED; + pWin->eEnd = TK_CURRENT; + } + } + pWin->pFunc = pFunc; +} + +/* +** Context object passed through sqlite3WalkExprList() to +** selectWindowRewriteExprCb() by selectWindowRewriteEList(). +*/ +typedef struct WindowRewrite WindowRewrite; +struct WindowRewrite { + Window *pWin; + SrcList *pSrc; + ExprList *pSub; + Select *pSubSelect; /* Current sub-select, if any */ +}; + +/* +** Callback function used by selectWindowRewriteEList(). If necessary, +** this function appends to the output expression-list and updates +** expression (*ppExpr) in place. +*/ +static int selectWindowRewriteExprCb(Walker *pWalker, Expr *pExpr){ + struct WindowRewrite *p = pWalker->u.pRewrite; + Parse *pParse = pWalker->pParse; + + /* If this function is being called from within a scalar sub-select + ** that used by the SELECT statement being processed, only process + ** TK_COLUMN expressions that refer to it (the outer SELECT). Do + ** not process aggregates or window functions at all, as they belong + ** to the scalar sub-select. */ + if( p->pSubSelect ){ + if( pExpr->op!=TK_COLUMN ){ + return WRC_Continue; + }else{ + int nSrc = p->pSrc->nSrc; + int i; + for(i=0; iiTable==p->pSrc->a[i].iCursor ) break; + } + if( i==nSrc ) return WRC_Continue; + } + } + + switch( pExpr->op ){ + + case TK_FUNCTION: + if( !ExprHasProperty(pExpr, EP_WinFunc) ){ + break; + }else{ + Window *pWin; + for(pWin=p->pWin; pWin; pWin=pWin->pNextWin){ + if( pExpr->y.pWin==pWin ){ + assert( pWin->pOwner==pExpr ); + return WRC_Prune; + } + } + } + /* Fall through. */ + + case TK_AGG_FUNCTION: + case TK_COLUMN: { + Expr *pDup = sqlite3ExprDup(pParse->db, pExpr, 0); + p->pSub = sqlite3ExprListAppend(pParse, p->pSub, pDup); + if( p->pSub ){ + assert( ExprHasProperty(pExpr, EP_Static)==0 ); + ExprSetProperty(pExpr, EP_Static); + sqlite3ExprDelete(pParse->db, pExpr); + ExprClearProperty(pExpr, EP_Static); + memset(pExpr, 0, sizeof(Expr)); + + pExpr->op = TK_COLUMN; + pExpr->iColumn = p->pSub->nExpr-1; + pExpr->iTable = p->pWin->iEphCsr; + } + + break; + } + + default: /* no-op */ + break; + } + + return WRC_Continue; +} +static int selectWindowRewriteSelectCb(Walker *pWalker, Select *pSelect){ + struct WindowRewrite *p = pWalker->u.pRewrite; + Select *pSave = p->pSubSelect; + if( pSave==pSelect ){ + return WRC_Continue; + }else{ + p->pSubSelect = pSelect; + sqlite3WalkSelect(pWalker, pSelect); + p->pSubSelect = pSave; + } + return WRC_Prune; +} + + +/* +** Iterate through each expression in expression-list pEList. For each: +** +** * TK_COLUMN, +** * aggregate function, or +** * window function with a Window object that is not a member of the +** Window list passed as the second argument (pWin). +** +** Append the node to output expression-list (*ppSub). And replace it +** with a TK_COLUMN that reads the (N-1)th element of table +** pWin->iEphCsr, where N is the number of elements in (*ppSub) after +** appending the new one. +*/ +static void selectWindowRewriteEList( + Parse *pParse, + Window *pWin, + SrcList *pSrc, + ExprList *pEList, /* Rewrite expressions in this list */ + ExprList **ppSub /* IN/OUT: Sub-select expression-list */ +){ + Walker sWalker; + WindowRewrite sRewrite; + + memset(&sWalker, 0, sizeof(Walker)); + memset(&sRewrite, 0, sizeof(WindowRewrite)); + + sRewrite.pSub = *ppSub; + sRewrite.pWin = pWin; + sRewrite.pSrc = pSrc; + + sWalker.pParse = pParse; + sWalker.xExprCallback = selectWindowRewriteExprCb; + sWalker.xSelectCallback = selectWindowRewriteSelectCb; + sWalker.u.pRewrite = &sRewrite; + + (void)sqlite3WalkExprList(&sWalker, pEList); + + *ppSub = sRewrite.pSub; +} + +/* +** Append a copy of each expression in expression-list pAppend to +** expression list pList. Return a pointer to the result list. +*/ +static ExprList *exprListAppendList( + Parse *pParse, /* Parsing context */ + ExprList *pList, /* List to which to append. Might be NULL */ + ExprList *pAppend /* List of values to append. Might be NULL */ +){ + if( pAppend ){ + int i; + int nInit = pList ? pList->nExpr : 0; + for(i=0; inExpr; i++){ + Expr *pDup = sqlite3ExprDup(pParse->db, pAppend->a[i].pExpr, 0); + pList = sqlite3ExprListAppend(pParse, pList, pDup); + if( pList ) pList->a[nInit+i].sortOrder = pAppend->a[i].sortOrder; + } + } + return pList; +} + +/* +** If the SELECT statement passed as the second argument does not invoke +** any SQL window functions, this function is a no-op. Otherwise, it +** rewrites the SELECT statement so that window function xStep functions +** are invoked in the correct order as described under "SELECT REWRITING" +** at the top of this file. +*/ +SQLITE_PRIVATE int sqlite3WindowRewrite(Parse *pParse, Select *p){ + int rc = SQLITE_OK; + if( p->pWin && p->pPrior==0 ){ + Vdbe *v = sqlite3GetVdbe(pParse); + sqlite3 *db = pParse->db; + Select *pSub = 0; /* The subquery */ + SrcList *pSrc = p->pSrc; + Expr *pWhere = p->pWhere; + ExprList *pGroupBy = p->pGroupBy; + Expr *pHaving = p->pHaving; + ExprList *pSort = 0; + + ExprList *pSublist = 0; /* Expression list for sub-query */ + Window *pMWin = p->pWin; /* Master window object */ + Window *pWin; /* Window object iterator */ + + p->pSrc = 0; + p->pWhere = 0; + p->pGroupBy = 0; + p->pHaving = 0; + + /* Create the ORDER BY clause for the sub-select. This is the concatenation + ** of the window PARTITION and ORDER BY clauses. Then, if this makes it + ** redundant, remove the ORDER BY from the parent SELECT. */ + pSort = sqlite3ExprListDup(db, pMWin->pPartition, 0); + pSort = exprListAppendList(pParse, pSort, pMWin->pOrderBy); + if( pSort && p->pOrderBy ){ + if( sqlite3ExprListCompare(pSort, p->pOrderBy, -1)==0 ){ + sqlite3ExprListDelete(db, p->pOrderBy); + p->pOrderBy = 0; + } + } + + /* Assign a cursor number for the ephemeral table used to buffer rows. + ** The OpenEphemeral instruction is coded later, after it is known how + ** many columns the table will have. */ + pMWin->iEphCsr = pParse->nTab++; + + selectWindowRewriteEList(pParse, pMWin, pSrc, p->pEList, &pSublist); + selectWindowRewriteEList(pParse, pMWin, pSrc, p->pOrderBy, &pSublist); + pMWin->nBufferCol = (pSublist ? pSublist->nExpr : 0); + + /* Append the PARTITION BY and ORDER BY expressions to the to the + ** sub-select expression list. They are required to figure out where + ** boundaries for partitions and sets of peer rows lie. */ + pSublist = exprListAppendList(pParse, pSublist, pMWin->pPartition); + pSublist = exprListAppendList(pParse, pSublist, pMWin->pOrderBy); + + /* Append the arguments passed to each window function to the + ** sub-select expression list. Also allocate two registers for each + ** window function - one for the accumulator, another for interim + ** results. */ + for(pWin=pMWin; pWin; pWin=pWin->pNextWin){ + pWin->iArgCol = (pSublist ? pSublist->nExpr : 0); + pSublist = exprListAppendList(pParse, pSublist, pWin->pOwner->x.pList); + if( pWin->pFilter ){ + Expr *pFilter = sqlite3ExprDup(db, pWin->pFilter, 0); + pSublist = sqlite3ExprListAppend(pParse, pSublist, pFilter); + } + pWin->regAccum = ++pParse->nMem; + pWin->regResult = ++pParse->nMem; + sqlite3VdbeAddOp2(v, OP_Null, 0, pWin->regAccum); + } + + /* If there is no ORDER BY or PARTITION BY clause, and the window + ** function accepts zero arguments, and there are no other columns + ** selected (e.g. "SELECT row_number() OVER () FROM t1"), it is possible + ** that pSublist is still NULL here. Add a constant expression here to + ** keep everything legal in this case. + */ + if( pSublist==0 ){ + pSublist = sqlite3ExprListAppend(pParse, 0, + sqlite3ExprAlloc(db, TK_INTEGER, &sqlite3IntTokens[0], 0) + ); + } + + pSub = sqlite3SelectNew( + pParse, pSublist, pSrc, pWhere, pGroupBy, pHaving, pSort, 0, 0 + ); + p->pSrc = sqlite3SrcListAppend(db, 0, 0, 0); + assert( p->pSrc || db->mallocFailed ); + if( p->pSrc ){ + p->pSrc->a[0].pSelect = pSub; + sqlite3SrcListAssignCursors(pParse, p->pSrc); + if( sqlite3ExpandSubquery(pParse, &p->pSrc->a[0]) ){ + rc = SQLITE_NOMEM; + }else{ + pSub->selFlags |= SF_Expanded; + p->selFlags &= ~SF_Aggregate; + sqlite3SelectPrep(pParse, pSub, 0); + } + + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pMWin->iEphCsr, pSublist->nExpr); + }else{ + sqlite3SelectDelete(db, pSub); + } + if( db->mallocFailed ) rc = SQLITE_NOMEM; + } + + return rc; +} + +/* +** Free the Window object passed as the second argument. +*/ +SQLITE_PRIVATE void sqlite3WindowDelete(sqlite3 *db, Window *p){ + if( p ){ + sqlite3ExprDelete(db, p->pFilter); + sqlite3ExprListDelete(db, p->pPartition); + sqlite3ExprListDelete(db, p->pOrderBy); + sqlite3ExprDelete(db, p->pEnd); + sqlite3ExprDelete(db, p->pStart); + sqlite3DbFree(db, p->zName); + sqlite3DbFree(db, p); + } +} + +/* +** Free the linked list of Window objects starting at the second argument. +*/ +SQLITE_PRIVATE void sqlite3WindowListDelete(sqlite3 *db, Window *p){ + while( p ){ + Window *pNext = p->pNextWin; + sqlite3WindowDelete(db, p); + p = pNext; + } +} + +/* +** The argument expression is an PRECEDING or FOLLOWING offset. The +** value should be a non-negative integer. If the value is not a +** constant, change it to NULL. The fact that it is then a non-negative +** integer will be caught later. But it is important not to leave +** variable values in the expression tree. +*/ +static Expr *sqlite3WindowOffsetExpr(Parse *pParse, Expr *pExpr){ + if( 0==sqlite3ExprIsConstant(pExpr) ){ + sqlite3ExprDelete(pParse->db, pExpr); + pExpr = sqlite3ExprAlloc(pParse->db, TK_NULL, 0, 0); + } + return pExpr; +} + +/* +** Allocate and return a new Window object describing a Window Definition. +*/ +SQLITE_PRIVATE Window *sqlite3WindowAlloc( + Parse *pParse, /* Parsing context */ + int eType, /* Frame type. TK_RANGE or TK_ROWS */ + int eStart, /* Start type: CURRENT, PRECEDING, FOLLOWING, UNBOUNDED */ + Expr *pStart, /* Start window size if TK_PRECEDING or FOLLOWING */ + int eEnd, /* End type: CURRENT, FOLLOWING, TK_UNBOUNDED, PRECEDING */ + Expr *pEnd /* End window size if TK_FOLLOWING or PRECEDING */ +){ + Window *pWin = 0; + + /* Parser assures the following: */ + assert( eType==TK_RANGE || eType==TK_ROWS ); + assert( eStart==TK_CURRENT || eStart==TK_PRECEDING + || eStart==TK_UNBOUNDED || eStart==TK_FOLLOWING ); + assert( eEnd==TK_CURRENT || eEnd==TK_FOLLOWING + || eEnd==TK_UNBOUNDED || eEnd==TK_PRECEDING ); + assert( (eStart==TK_PRECEDING || eStart==TK_FOLLOWING)==(pStart!=0) ); + assert( (eEnd==TK_FOLLOWING || eEnd==TK_PRECEDING)==(pEnd!=0) ); + + + /* If a frame is declared "RANGE" (not "ROWS"), then it may not use + ** either " PRECEDING" or " FOLLOWING". + */ + if( eType==TK_RANGE && (pStart!=0 || pEnd!=0) ){ + sqlite3ErrorMsg(pParse, "RANGE must use only UNBOUNDED or CURRENT ROW"); + goto windowAllocErr; + } + + /* Additionally, the + ** starting boundary type may not occur earlier in the following list than + ** the ending boundary type: + ** + ** UNBOUNDED PRECEDING + ** PRECEDING + ** CURRENT ROW + ** FOLLOWING + ** UNBOUNDED FOLLOWING + ** + ** The parser ensures that "UNBOUNDED PRECEDING" cannot be used as an ending + ** boundary, and than "UNBOUNDED FOLLOWING" cannot be used as a starting + ** frame boundary. + */ + if( (eStart==TK_CURRENT && eEnd==TK_PRECEDING) + || (eStart==TK_FOLLOWING && (eEnd==TK_PRECEDING || eEnd==TK_CURRENT)) + ){ + sqlite3ErrorMsg(pParse, "unsupported frame delimiter for ROWS"); + goto windowAllocErr; + } + + pWin = (Window*)sqlite3DbMallocZero(pParse->db, sizeof(Window)); + if( pWin==0 ) goto windowAllocErr; + pWin->eType = eType; + pWin->eStart = eStart; + pWin->eEnd = eEnd; + pWin->pEnd = sqlite3WindowOffsetExpr(pParse, pEnd); + pWin->pStart = sqlite3WindowOffsetExpr(pParse, pStart); + return pWin; + +windowAllocErr: + sqlite3ExprDelete(pParse->db, pEnd); + sqlite3ExprDelete(pParse->db, pStart); + return 0; +} + +/* +** Attach window object pWin to expression p. +*/ +SQLITE_PRIVATE void sqlite3WindowAttach(Parse *pParse, Expr *p, Window *pWin){ + if( p ){ + assert( p->op==TK_FUNCTION ); + /* This routine is only called for the parser. If pWin was not + ** allocated due to an OOM, then the parser would fail before ever + ** invoking this routine */ + if( ALWAYS(pWin) ){ + p->y.pWin = pWin; + ExprSetProperty(p, EP_WinFunc); + pWin->pOwner = p; + if( p->flags & EP_Distinct ){ + sqlite3ErrorMsg(pParse, + "DISTINCT is not supported for window functions"); + } + } + }else{ + sqlite3WindowDelete(pParse->db, pWin); + } +} + +/* +** Return 0 if the two window objects are identical, or non-zero otherwise. +** Identical window objects can be processed in a single scan. +*/ +SQLITE_PRIVATE int sqlite3WindowCompare(Parse *pParse, Window *p1, Window *p2){ + if( p1->eType!=p2->eType ) return 1; + if( p1->eStart!=p2->eStart ) return 1; + if( p1->eEnd!=p2->eEnd ) return 1; + if( sqlite3ExprCompare(pParse, p1->pStart, p2->pStart, -1) ) return 1; + if( sqlite3ExprCompare(pParse, p1->pEnd, p2->pEnd, -1) ) return 1; + if( sqlite3ExprListCompare(p1->pPartition, p2->pPartition, -1) ) return 1; + if( sqlite3ExprListCompare(p1->pOrderBy, p2->pOrderBy, -1) ) return 1; + return 0; +} + + +/* +** This is called by code in select.c before it calls sqlite3WhereBegin() +** to begin iterating through the sub-query results. It is used to allocate +** and initialize registers and cursors used by sqlite3WindowCodeStep(). +*/ +SQLITE_PRIVATE void sqlite3WindowCodeInit(Parse *pParse, Window *pMWin){ + Window *pWin; + Vdbe *v = sqlite3GetVdbe(pParse); + int nPart = (pMWin->pPartition ? pMWin->pPartition->nExpr : 0); + nPart += (pMWin->pOrderBy ? pMWin->pOrderBy->nExpr : 0); + if( nPart ){ + pMWin->regPart = pParse->nMem+1; + pParse->nMem += nPart; + sqlite3VdbeAddOp3(v, OP_Null, 0, pMWin->regPart, pMWin->regPart+nPart-1); + } + + for(pWin=pMWin; pWin; pWin=pWin->pNextWin){ + FuncDef *p = pWin->pFunc; + if( (p->funcFlags & SQLITE_FUNC_MINMAX) && pWin->eStart!=TK_UNBOUNDED ){ + /* The inline versions of min() and max() require a single ephemeral + ** table and 3 registers. The registers are used as follows: + ** + ** regApp+0: slot to copy min()/max() argument to for MakeRecord + ** regApp+1: integer value used to ensure keys are unique + ** regApp+2: output of MakeRecord + */ + ExprList *pList = pWin->pOwner->x.pList; + KeyInfo *pKeyInfo = sqlite3KeyInfoFromExprList(pParse, pList, 0, 0); + pWin->csrApp = pParse->nTab++; + pWin->regApp = pParse->nMem+1; + pParse->nMem += 3; + if( pKeyInfo && pWin->pFunc->zName[1]=='i' ){ + assert( pKeyInfo->aSortOrder[0]==0 ); + pKeyInfo->aSortOrder[0] = 1; + } + sqlite3VdbeAddOp2(v, OP_OpenEphemeral, pWin->csrApp, 2); + sqlite3VdbeAppendP4(v, pKeyInfo, P4_KEYINFO); + sqlite3VdbeAddOp2(v, OP_Integer, 0, pWin->regApp+1); + } + else if( p->zName==nth_valueName || p->zName==first_valueName ){ + /* Allocate two registers at pWin->regApp. These will be used to + ** store the start and end index of the current frame. */ + assert( pMWin->iEphCsr ); + pWin->regApp = pParse->nMem+1; + pWin->csrApp = pParse->nTab++; + pParse->nMem += 2; + sqlite3VdbeAddOp2(v, OP_OpenDup, pWin->csrApp, pMWin->iEphCsr); + } + else if( p->zName==leadName || p->zName==lagName ){ + assert( pMWin->iEphCsr ); + pWin->csrApp = pParse->nTab++; + sqlite3VdbeAddOp2(v, OP_OpenDup, pWin->csrApp, pMWin->iEphCsr); + } + } +} + +/* +** A "PRECEDING " (eCond==0) or "FOLLOWING " (eCond==1) or the +** value of the second argument to nth_value() (eCond==2) has just been +** evaluated and the result left in register reg. This function generates VM +** code to check that the value is a non-negative integer and throws an +** exception if it is not. +*/ +static void windowCheckIntValue(Parse *pParse, int reg, int eCond){ + static const char *azErr[] = { + "frame starting offset must be a non-negative integer", + "frame ending offset must be a non-negative integer", + "second argument to nth_value must be a positive integer" + }; + static int aOp[] = { OP_Ge, OP_Ge, OP_Gt }; + Vdbe *v = sqlite3GetVdbe(pParse); + int regZero = sqlite3GetTempReg(pParse); + assert( eCond==0 || eCond==1 || eCond==2 ); + sqlite3VdbeAddOp2(v, OP_Integer, 0, regZero); + sqlite3VdbeAddOp2(v, OP_MustBeInt, reg, sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverageIf(v, eCond==0); + VdbeCoverageIf(v, eCond==1); + VdbeCoverageIf(v, eCond==2); + sqlite3VdbeAddOp3(v, aOp[eCond], regZero, sqlite3VdbeCurrentAddr(v)+2, reg); + VdbeCoverageNeverNullIf(v, eCond==0); + VdbeCoverageNeverNullIf(v, eCond==1); + VdbeCoverageNeverNullIf(v, eCond==2); + sqlite3VdbeAddOp2(v, OP_Halt, SQLITE_ERROR, OE_Abort); + sqlite3VdbeAppendP4(v, (void*)azErr[eCond], P4_STATIC); + sqlite3ReleaseTempReg(pParse, regZero); +} + +/* +** Return the number of arguments passed to the window-function associated +** with the object passed as the only argument to this function. +*/ +static int windowArgCount(Window *pWin){ + ExprList *pList = pWin->pOwner->x.pList; + return (pList ? pList->nExpr : 0); +} + +/* +** Generate VM code to invoke either xStep() (if bInverse is 0) or +** xInverse (if bInverse is non-zero) for each window function in the +** linked list starting at pMWin. Or, for built-in window functions +** that do not use the standard function API, generate the required +** inline VM code. +** +** If argument csr is greater than or equal to 0, then argument reg is +** the first register in an array of registers guaranteed to be large +** enough to hold the array of arguments for each function. In this case +** the arguments are extracted from the current row of csr into the +** array of registers before invoking OP_AggStep or OP_AggInverse +** +** Or, if csr is less than zero, then the array of registers at reg is +** already populated with all columns from the current row of the sub-query. +** +** If argument regPartSize is non-zero, then it is a register containing the +** number of rows in the current partition. +*/ +static void windowAggStep( + Parse *pParse, + Window *pMWin, /* Linked list of window functions */ + int csr, /* Read arguments from this cursor */ + int bInverse, /* True to invoke xInverse instead of xStep */ + int reg, /* Array of registers */ + int regPartSize /* Register containing size of partition */ +){ + Vdbe *v = sqlite3GetVdbe(pParse); + Window *pWin; + for(pWin=pMWin; pWin; pWin=pWin->pNextWin){ + int flags = pWin->pFunc->funcFlags; + int regArg; + int nArg = windowArgCount(pWin); + + if( csr>=0 ){ + int i; + for(i=0; iiArgCol+i, reg+i); + } + regArg = reg; + if( flags & SQLITE_FUNC_WINDOW_SIZE ){ + if( nArg==0 ){ + regArg = regPartSize; + }else{ + sqlite3VdbeAddOp2(v, OP_SCopy, regPartSize, reg+nArg); + } + nArg++; + } + }else{ + assert( !(flags & SQLITE_FUNC_WINDOW_SIZE) ); + regArg = reg + pWin->iArgCol; + } + + if( (pWin->pFunc->funcFlags & SQLITE_FUNC_MINMAX) + && pWin->eStart!=TK_UNBOUNDED + ){ + int addrIsNull = sqlite3VdbeAddOp1(v, OP_IsNull, regArg); + VdbeCoverage(v); + if( bInverse==0 ){ + sqlite3VdbeAddOp2(v, OP_AddImm, pWin->regApp+1, 1); + sqlite3VdbeAddOp2(v, OP_SCopy, regArg, pWin->regApp); + sqlite3VdbeAddOp3(v, OP_MakeRecord, pWin->regApp, 2, pWin->regApp+2); + sqlite3VdbeAddOp2(v, OP_IdxInsert, pWin->csrApp, pWin->regApp+2); + }else{ + sqlite3VdbeAddOp4Int(v, OP_SeekGE, pWin->csrApp, 0, regArg, 1); + VdbeCoverageNeverTaken(v); + sqlite3VdbeAddOp1(v, OP_Delete, pWin->csrApp); + sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2); + } + sqlite3VdbeJumpHere(v, addrIsNull); + }else if( pWin->regApp ){ + assert( pWin->pFunc->zName==nth_valueName + || pWin->pFunc->zName==first_valueName + ); + assert( bInverse==0 || bInverse==1 ); + sqlite3VdbeAddOp2(v, OP_AddImm, pWin->regApp+1-bInverse, 1); + }else if( pWin->pFunc->zName==leadName + || pWin->pFunc->zName==lagName + ){ + /* no-op */ + }else{ + int addrIf = 0; + if( pWin->pFilter ){ + int regTmp; + assert( nArg==0 || nArg==pWin->pOwner->x.pList->nExpr ); + assert( nArg || pWin->pOwner->x.pList==0 ); + if( csr>0 ){ + regTmp = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_Column, csr, pWin->iArgCol+nArg,regTmp); + }else{ + regTmp = regArg + nArg; + } + addrIf = sqlite3VdbeAddOp3(v, OP_IfNot, regTmp, 0, 1); + VdbeCoverage(v); + if( csr>0 ){ + sqlite3ReleaseTempReg(pParse, regTmp); + } + } + if( pWin->pFunc->funcFlags & SQLITE_FUNC_NEEDCOLL ){ + CollSeq *pColl; + assert( nArg>0 ); + pColl = sqlite3ExprNNCollSeq(pParse, pWin->pOwner->x.pList->a[0].pExpr); + sqlite3VdbeAddOp4(v, OP_CollSeq, 0,0,0, (const char*)pColl, P4_COLLSEQ); + } + sqlite3VdbeAddOp3(v, bInverse? OP_AggInverse : OP_AggStep, + bInverse, regArg, pWin->regAccum); + sqlite3VdbeAppendP4(v, pWin->pFunc, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, (u8)nArg); + if( addrIf ) sqlite3VdbeJumpHere(v, addrIf); + } + } +} + +/* +** Generate VM code to invoke either xValue() (bFinal==0) or xFinalize() +** (bFinal==1) for each window function in the linked list starting at +** pMWin. Or, for built-in window-functions that do not use the standard +** API, generate the equivalent VM code. +*/ +static void windowAggFinal(Parse *pParse, Window *pMWin, int bFinal){ + Vdbe *v = sqlite3GetVdbe(pParse); + Window *pWin; + + for(pWin=pMWin; pWin; pWin=pWin->pNextWin){ + if( (pWin->pFunc->funcFlags & SQLITE_FUNC_MINMAX) + && pWin->eStart!=TK_UNBOUNDED + ){ + sqlite3VdbeAddOp2(v, OP_Null, 0, pWin->regResult); + sqlite3VdbeAddOp1(v, OP_Last, pWin->csrApp); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Column, pWin->csrApp, 0, pWin->regResult); + sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2); + if( bFinal ){ + sqlite3VdbeAddOp1(v, OP_ResetSorter, pWin->csrApp); + } + }else if( pWin->regApp ){ + }else{ + if( bFinal ){ + sqlite3VdbeAddOp2(v, OP_AggFinal, pWin->regAccum, windowArgCount(pWin)); + sqlite3VdbeAppendP4(v, pWin->pFunc, P4_FUNCDEF); + sqlite3VdbeAddOp2(v, OP_Copy, pWin->regAccum, pWin->regResult); + sqlite3VdbeAddOp2(v, OP_Null, 0, pWin->regAccum); + }else{ + sqlite3VdbeAddOp3(v, OP_AggValue, pWin->regAccum, windowArgCount(pWin), + pWin->regResult); + sqlite3VdbeAppendP4(v, pWin->pFunc, P4_FUNCDEF); + } + } + } +} + +/* +** This function generates VM code to invoke the sub-routine at address +** lblFlushPart once for each partition with the entire partition cached in +** the Window.iEphCsr temp table. +*/ +static void windowPartitionCache( + Parse *pParse, + Select *p, /* The rewritten SELECT statement */ + WhereInfo *pWInfo, /* WhereInfo to call WhereEnd() on */ + int regFlushPart, /* Register to use with Gosub lblFlushPart */ + int lblFlushPart, /* Subroutine to Gosub to */ + int *pRegSize /* OUT: Register containing partition size */ +){ + Window *pMWin = p->pWin; + Vdbe *v = sqlite3GetVdbe(pParse); + int iSubCsr = p->pSrc->a[0].iCursor; + int nSub = p->pSrc->a[0].pTab->nCol; + int k; + + int reg = pParse->nMem+1; + int regRecord = reg+nSub; + int regRowid = regRecord+1; + + *pRegSize = regRowid; + pParse->nMem += nSub + 2; + + /* Load the column values for the row returned by the sub-select + ** into an array of registers starting at reg. */ + for(k=0; kpPartition ){ + int addr; + ExprList *pPart = pMWin->pPartition; + int nPart = pPart->nExpr; + int regNewPart = reg + pMWin->nBufferCol; + KeyInfo *pKeyInfo = sqlite3KeyInfoFromExprList(pParse, pPart, 0, 0); + + addr = sqlite3VdbeAddOp3(v, OP_Compare, regNewPart, pMWin->regPart,nPart); + sqlite3VdbeAppendP4(v, (void*)pKeyInfo, P4_KEYINFO); + sqlite3VdbeAddOp3(v, OP_Jump, addr+2, addr+4, addr+2); + VdbeCoverageEqNe(v); + sqlite3VdbeAddOp3(v, OP_Copy, regNewPart, pMWin->regPart, nPart-1); + sqlite3VdbeAddOp2(v, OP_Gosub, regFlushPart, lblFlushPart); + VdbeComment((v, "call flush_partition")); + } + + /* Buffer the current row in the ephemeral table. */ + sqlite3VdbeAddOp2(v, OP_NewRowid, pMWin->iEphCsr, regRowid); + sqlite3VdbeAddOp3(v, OP_Insert, pMWin->iEphCsr, regRecord, regRowid); + + /* End of the input loop */ + sqlite3WhereEnd(pWInfo); + + /* Invoke "flush_partition" to deal with the final (or only) partition */ + sqlite3VdbeAddOp2(v, OP_Gosub, regFlushPart, lblFlushPart); + VdbeComment((v, "call flush_partition")); +} + +/* +** Invoke the sub-routine at regGosub (generated by code in select.c) to +** return the current row of Window.iEphCsr. If all window functions are +** aggregate window functions that use the standard API, a single +** OP_Gosub instruction is all that this routine generates. Extra VM code +** for per-row processing is only generated for the following built-in window +** functions: +** +** nth_value() +** first_value() +** lag() +** lead() +*/ +static void windowReturnOneRow( + Parse *pParse, + Window *pMWin, + int regGosub, + int addrGosub +){ + Vdbe *v = sqlite3GetVdbe(pParse); + Window *pWin; + for(pWin=pMWin; pWin; pWin=pWin->pNextWin){ + FuncDef *pFunc = pWin->pFunc; + if( pFunc->zName==nth_valueName + || pFunc->zName==first_valueName + ){ + int csr = pWin->csrApp; + int lbl = sqlite3VdbeMakeLabel(v); + int tmpReg = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp2(v, OP_Null, 0, pWin->regResult); + + if( pFunc->zName==nth_valueName ){ + sqlite3VdbeAddOp3(v, OP_Column, pMWin->iEphCsr, pWin->iArgCol+1,tmpReg); + windowCheckIntValue(pParse, tmpReg, 2); + }else{ + sqlite3VdbeAddOp2(v, OP_Integer, 1, tmpReg); + } + sqlite3VdbeAddOp3(v, OP_Add, tmpReg, pWin->regApp, tmpReg); + sqlite3VdbeAddOp3(v, OP_Gt, pWin->regApp+1, lbl, tmpReg); + VdbeCoverageNeverNull(v); + sqlite3VdbeAddOp3(v, OP_SeekRowid, csr, 0, tmpReg); + VdbeCoverageNeverTaken(v); + sqlite3VdbeAddOp3(v, OP_Column, csr, pWin->iArgCol, pWin->regResult); + sqlite3VdbeResolveLabel(v, lbl); + sqlite3ReleaseTempReg(pParse, tmpReg); + } + else if( pFunc->zName==leadName || pFunc->zName==lagName ){ + int nArg = pWin->pOwner->x.pList->nExpr; + int iEph = pMWin->iEphCsr; + int csr = pWin->csrApp; + int lbl = sqlite3VdbeMakeLabel(v); + int tmpReg = sqlite3GetTempReg(pParse); + + if( nArg<3 ){ + sqlite3VdbeAddOp2(v, OP_Null, 0, pWin->regResult); + }else{ + sqlite3VdbeAddOp3(v, OP_Column, iEph, pWin->iArgCol+2, pWin->regResult); + } + sqlite3VdbeAddOp2(v, OP_Rowid, iEph, tmpReg); + if( nArg<2 ){ + int val = (pFunc->zName==leadName ? 1 : -1); + sqlite3VdbeAddOp2(v, OP_AddImm, tmpReg, val); + }else{ + int op = (pFunc->zName==leadName ? OP_Add : OP_Subtract); + int tmpReg2 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp3(v, OP_Column, iEph, pWin->iArgCol+1, tmpReg2); + sqlite3VdbeAddOp3(v, op, tmpReg2, tmpReg, tmpReg); + sqlite3ReleaseTempReg(pParse, tmpReg2); + } + + sqlite3VdbeAddOp3(v, OP_SeekRowid, csr, lbl, tmpReg); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_Column, csr, pWin->iArgCol, pWin->regResult); + sqlite3VdbeResolveLabel(v, lbl); + sqlite3ReleaseTempReg(pParse, tmpReg); + } + } + sqlite3VdbeAddOp2(v, OP_Gosub, regGosub, addrGosub); +} + +/* +** Invoke the code generated by windowReturnOneRow() and, optionally, the +** xInverse() function for each window function, for one or more rows +** from the Window.iEphCsr temp table. This routine generates VM code +** similar to: +** +** while( regCtr>0 ){ +** regCtr--; +** windowReturnOneRow() +** if( bInverse ){ +** AggInverse +** } +** Next (Window.iEphCsr) +** } +*/ +static void windowReturnRows( + Parse *pParse, + Window *pMWin, /* List of window functions */ + int regCtr, /* Register containing number of rows */ + int regGosub, /* Register for Gosub addrGosub */ + int addrGosub, /* Address of sub-routine for ReturnOneRow */ + int regInvArg, /* Array of registers for xInverse args */ + int regInvSize /* Register containing size of partition */ +){ + int addr; + Vdbe *v = sqlite3GetVdbe(pParse); + windowAggFinal(pParse, pMWin, 0); + addr = sqlite3VdbeAddOp3(v, OP_IfPos, regCtr, sqlite3VdbeCurrentAddr(v)+2 ,1); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, 0); + windowReturnOneRow(pParse, pMWin, regGosub, addrGosub); + if( regInvArg ){ + windowAggStep(pParse, pMWin, pMWin->iEphCsr, 1, regInvArg, regInvSize); + } + sqlite3VdbeAddOp2(v, OP_Next, pMWin->iEphCsr, addr); + VdbeCoverage(v); + sqlite3VdbeJumpHere(v, addr+1); /* The OP_Goto */ +} + +/* +** Generate code to set the accumulator register for each window function +** in the linked list passed as the second argument to NULL. And perform +** any equivalent initialization required by any built-in window functions +** in the list. +*/ +static int windowInitAccum(Parse *pParse, Window *pMWin){ + Vdbe *v = sqlite3GetVdbe(pParse); + int regArg; + int nArg = 0; + Window *pWin; + for(pWin=pMWin; pWin; pWin=pWin->pNextWin){ + FuncDef *pFunc = pWin->pFunc; + sqlite3VdbeAddOp2(v, OP_Null, 0, pWin->regAccum); + nArg = MAX(nArg, windowArgCount(pWin)); + if( pFunc->zName==nth_valueName + || pFunc->zName==first_valueName + ){ + sqlite3VdbeAddOp2(v, OP_Integer, 0, pWin->regApp); + sqlite3VdbeAddOp2(v, OP_Integer, 0, pWin->regApp+1); + } + + if( (pFunc->funcFlags & SQLITE_FUNC_MINMAX) && pWin->csrApp ){ + assert( pWin->eStart!=TK_UNBOUNDED ); + sqlite3VdbeAddOp1(v, OP_ResetSorter, pWin->csrApp); + sqlite3VdbeAddOp2(v, OP_Integer, 0, pWin->regApp+1); + } + } + regArg = pParse->nMem+1; + pParse->nMem += nArg; + return regArg; +} + + +/* +** This function does the work of sqlite3WindowCodeStep() for all "ROWS" +** window frame types except for "BETWEEN UNBOUNDED PRECEDING AND CURRENT +** ROW". Pseudo-code for each follows. +** +** ROWS BETWEEN PRECEDING AND FOLLOWING +** +** ... +** if( new partition ){ +** Gosub flush_partition +** } +** Insert (record in eph-table) +** sqlite3WhereEnd() +** Gosub flush_partition +** +** flush_partition: +** Once { +** OpenDup (iEphCsr -> csrStart) +** OpenDup (iEphCsr -> csrEnd) +** } +** regStart = // PRECEDING expression +** regEnd = // FOLLOWING expression +** if( regStart<0 || regEnd<0 ){ error! } +** Rewind (csr,csrStart,csrEnd) // if EOF goto flush_partition_done +** Next(csrEnd) // if EOF skip Aggstep +** Aggstep (csrEnd) +** if( (regEnd--)<=0 ){ +** AggFinal (xValue) +** Gosub addrGosub +** Next(csr) // if EOF goto flush_partition_done +** if( (regStart--)<=0 ){ +** AggInverse (csrStart) +** Next(csrStart) +** } +** } +** flush_partition_done: +** ResetSorter (csr) +** Return +** +** ROWS BETWEEN PRECEDING AND CURRENT ROW +** ROWS BETWEEN CURRENT ROW AND FOLLOWING +** ROWS BETWEEN UNBOUNDED PRECEDING AND FOLLOWING +** +** These are similar to the above. For "CURRENT ROW", intialize the +** register to 0. For "UNBOUNDED PRECEDING" to infinity. +** +** ROWS BETWEEN PRECEDING AND UNBOUNDED FOLLOWING +** ROWS BETWEEN CURRENT ROW AND UNBOUNDED FOLLOWING +** +** Rewind (csr,csrStart,csrEnd) // if EOF goto flush_partition_done +** while( 1 ){ +** Next(csrEnd) // Exit while(1) at EOF +** Aggstep (csrEnd) +** } +** while( 1 ){ +** AggFinal (xValue) +** Gosub addrGosub +** Next(csr) // if EOF goto flush_partition_done +** if( (regStart--)<=0 ){ +** AggInverse (csrStart) +** Next(csrStart) +** } +** } +** +** For the "CURRENT ROW AND UNBOUNDED FOLLOWING" case, the final if() +** condition is always true (as if regStart were initialized to 0). +** +** RANGE BETWEEN CURRENT ROW AND UNBOUNDED FOLLOWING +** +** This is the only RANGE case handled by this routine. It modifies the +** second while( 1 ) loop in "ROWS BETWEEN CURRENT ... UNBOUNDED..." to +** be: +** +** while( 1 ){ +** AggFinal (xValue) +** while( 1 ){ +** regPeer++ +** Gosub addrGosub +** Next(csr) // if EOF goto flush_partition_done +** if( new peer ) break; +** } +** while( (regPeer--)>0 ){ +** AggInverse (csrStart) +** Next(csrStart) +** } +** } +** +** ROWS BETWEEN FOLLOWING AND FOLLOWING +** +** regEnd = regEnd - regStart +** Rewind (csr,csrStart,csrEnd) // if EOF goto flush_partition_done +** Aggstep (csrEnd) +** Next(csrEnd) // if EOF fall-through +** if( (regEnd--)<=0 ){ +** if( (regStart--)<=0 ){ +** AggFinal (xValue) +** Gosub addrGosub +** Next(csr) // if EOF goto flush_partition_done +** } +** AggInverse (csrStart) +** Next (csrStart) +** } +** +** ROWS BETWEEN PRECEDING AND PRECEDING +** +** Replace the bit after "Rewind" in the above with: +** +** if( (regEnd--)<=0 ){ +** AggStep (csrEnd) +** Next (csrEnd) +** } +** AggFinal (xValue) +** Gosub addrGosub +** Next(csr) // if EOF goto flush_partition_done +** if( (regStart--)<=0 ){ +** AggInverse (csr2) +** Next (csr2) +** } +** +*/ +static void windowCodeRowExprStep( + Parse *pParse, + Select *p, + WhereInfo *pWInfo, + int regGosub, + int addrGosub +){ + Window *pMWin = p->pWin; + Vdbe *v = sqlite3GetVdbe(pParse); + int regFlushPart; /* Register for "Gosub flush_partition" */ + int lblFlushPart; /* Label for "Gosub flush_partition" */ + int lblFlushDone; /* Label for "Gosub flush_partition_done" */ + + int regArg; + int addr; + int csrStart = pParse->nTab++; + int csrEnd = pParse->nTab++; + int regStart; /* Value of PRECEDING */ + int regEnd; /* Value of FOLLOWING */ + int addrGoto; + int addrTop; + int addrIfPos1 = 0; + int addrIfPos2 = 0; + int regSize = 0; + + assert( pMWin->eStart==TK_PRECEDING + || pMWin->eStart==TK_CURRENT + || pMWin->eStart==TK_FOLLOWING + || pMWin->eStart==TK_UNBOUNDED + ); + assert( pMWin->eEnd==TK_FOLLOWING + || pMWin->eEnd==TK_CURRENT + || pMWin->eEnd==TK_UNBOUNDED + || pMWin->eEnd==TK_PRECEDING + ); + + /* Allocate register and label for the "flush_partition" sub-routine. */ + regFlushPart = ++pParse->nMem; + lblFlushPart = sqlite3VdbeMakeLabel(v); + lblFlushDone = sqlite3VdbeMakeLabel(v); + + regStart = ++pParse->nMem; + regEnd = ++pParse->nMem; + + windowPartitionCache(pParse, p, pWInfo, regFlushPart, lblFlushPart, ®Size); + + addrGoto = sqlite3VdbeAddOp0(v, OP_Goto); + + /* Start of "flush_partition" */ + sqlite3VdbeResolveLabel(v, lblFlushPart); + sqlite3VdbeAddOp2(v, OP_Once, 0, sqlite3VdbeCurrentAddr(v)+3); + VdbeCoverage(v); + VdbeComment((v, "Flush_partition subroutine")); + sqlite3VdbeAddOp2(v, OP_OpenDup, csrStart, pMWin->iEphCsr); + sqlite3VdbeAddOp2(v, OP_OpenDup, csrEnd, pMWin->iEphCsr); + + /* If either regStart or regEnd are not non-negative integers, throw + ** an exception. */ + if( pMWin->pStart ){ + sqlite3ExprCode(pParse, pMWin->pStart, regStart); + windowCheckIntValue(pParse, regStart, 0); + } + if( pMWin->pEnd ){ + sqlite3ExprCode(pParse, pMWin->pEnd, regEnd); + windowCheckIntValue(pParse, regEnd, 1); + } + + /* If this is "ROWS FOLLOWING AND ROWS FOLLOWING", do: + ** + ** if( regEndpEnd && pMWin->eStart==TK_FOLLOWING ){ + assert( pMWin->pStart!=0 ); + assert( pMWin->eEnd==TK_FOLLOWING ); + sqlite3VdbeAddOp3(v, OP_Ge, regStart, sqlite3VdbeCurrentAddr(v)+2, regEnd); + VdbeCoverageNeverNull(v); + sqlite3VdbeAddOp2(v, OP_Copy, regSize, regStart); + sqlite3VdbeAddOp3(v, OP_Subtract, regStart, regEnd, regEnd); + } + + if( pMWin->pStart && pMWin->eEnd==TK_PRECEDING ){ + assert( pMWin->pEnd!=0 ); + assert( pMWin->eStart==TK_PRECEDING ); + sqlite3VdbeAddOp3(v, OP_Le, regStart, sqlite3VdbeCurrentAddr(v)+3, regEnd); + VdbeCoverageNeverNull(v); + sqlite3VdbeAddOp2(v, OP_Copy, regSize, regStart); + sqlite3VdbeAddOp2(v, OP_Copy, regSize, regEnd); + } + + /* Initialize the accumulator register for each window function to NULL */ + regArg = windowInitAccum(pParse, pMWin); + + sqlite3VdbeAddOp2(v, OP_Rewind, pMWin->iEphCsr, lblFlushDone); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Rewind, csrStart, lblFlushDone); + VdbeCoverageNeverTaken(v); + sqlite3VdbeChangeP5(v, 1); + sqlite3VdbeAddOp2(v, OP_Rewind, csrEnd, lblFlushDone); + VdbeCoverageNeverTaken(v); + sqlite3VdbeChangeP5(v, 1); + + /* Invoke AggStep function for each window function using the row that + ** csrEnd currently points to. Or, if csrEnd is already at EOF, + ** do nothing. */ + addrTop = sqlite3VdbeCurrentAddr(v); + if( pMWin->eEnd==TK_PRECEDING ){ + addrIfPos1 = sqlite3VdbeAddOp3(v, OP_IfPos, regEnd, 0 , 1); + VdbeCoverage(v); + } + sqlite3VdbeAddOp2(v, OP_Next, csrEnd, sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + addr = sqlite3VdbeAddOp0(v, OP_Goto); + windowAggStep(pParse, pMWin, csrEnd, 0, regArg, regSize); + if( pMWin->eEnd==TK_UNBOUNDED ){ + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrTop); + sqlite3VdbeJumpHere(v, addr); + addrTop = sqlite3VdbeCurrentAddr(v); + }else{ + sqlite3VdbeJumpHere(v, addr); + if( pMWin->eEnd==TK_PRECEDING ){ + sqlite3VdbeJumpHere(v, addrIfPos1); + } + } + + if( pMWin->eEnd==TK_FOLLOWING ){ + addrIfPos1 = sqlite3VdbeAddOp3(v, OP_IfPos, regEnd, 0 , 1); + VdbeCoverage(v); + } + if( pMWin->eStart==TK_FOLLOWING ){ + addrIfPos2 = sqlite3VdbeAddOp3(v, OP_IfPos, regStart, 0 , 1); + VdbeCoverage(v); + } + windowAggFinal(pParse, pMWin, 0); + windowReturnOneRow(pParse, pMWin, regGosub, addrGosub); + sqlite3VdbeAddOp2(v, OP_Next, pMWin->iEphCsr, sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, lblFlushDone); + if( pMWin->eStart==TK_FOLLOWING ){ + sqlite3VdbeJumpHere(v, addrIfPos2); + } + + if( pMWin->eStart==TK_CURRENT + || pMWin->eStart==TK_PRECEDING + || pMWin->eStart==TK_FOLLOWING + ){ + int lblSkipInverse = sqlite3VdbeMakeLabel(v);; + if( pMWin->eStart==TK_PRECEDING ){ + sqlite3VdbeAddOp3(v, OP_IfPos, regStart, lblSkipInverse, 1); + VdbeCoverage(v); + } + if( pMWin->eStart==TK_FOLLOWING ){ + sqlite3VdbeAddOp2(v, OP_Next, csrStart, sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Goto, 0, lblSkipInverse); + }else{ + sqlite3VdbeAddOp2(v, OP_Next, csrStart, sqlite3VdbeCurrentAddr(v)+1); + VdbeCoverageAlwaysTaken(v); + } + windowAggStep(pParse, pMWin, csrStart, 1, regArg, regSize); + sqlite3VdbeResolveLabel(v, lblSkipInverse); + } + if( pMWin->eEnd==TK_FOLLOWING ){ + sqlite3VdbeJumpHere(v, addrIfPos1); + } + sqlite3VdbeAddOp2(v, OP_Goto, 0, addrTop); + + /* flush_partition_done: */ + sqlite3VdbeResolveLabel(v, lblFlushDone); + sqlite3VdbeAddOp1(v, OP_ResetSorter, pMWin->iEphCsr); + sqlite3VdbeAddOp1(v, OP_Return, regFlushPart); + VdbeComment((v, "end flush_partition subroutine")); + + /* Jump to here to skip over flush_partition */ + sqlite3VdbeJumpHere(v, addrGoto); +} + +/* +** This function does the work of sqlite3WindowCodeStep() for cases that +** would normally be handled by windowCodeDefaultStep() when there are +** one or more built-in window-functions that require the entire partition +** to be cached in a temp table before any rows can be returned. Additionally. +** "RANGE BETWEEN CURRENT ROW AND UNBOUNDED FOLLOWING" is always handled by +** this function. +** +** Pseudo-code corresponding to the VM code generated by this function +** for each type of window follows. +** +** RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +** +** flush_partition: +** Once { +** OpenDup (iEphCsr -> csrLead) +** } +** Integer ctr 0 +** foreach row (csrLead){ +** if( new peer ){ +** AggFinal (xValue) +** for(i=0; i csrLead) +** } +** foreach row (csrLead) { +** AggStep (csrLead) +** } +** foreach row (iEphCsr) { +** Gosub addrGosub +** } +** +** RANGE BETWEEN CURRENT ROW AND UNBOUNDED FOLLOWING +** +** flush_partition: +** Once { +** OpenDup (iEphCsr -> csrLead) +** } +** foreach row (csrLead){ +** AggStep (csrLead) +** } +** Rewind (csrLead) +** Integer ctr 0 +** foreach row (csrLead){ +** if( new peer ){ +** AggFinal (xValue) +** for(i=0; ipWin; + Vdbe *v = sqlite3GetVdbe(pParse); + int k; + int addr; + ExprList *pPart = pMWin->pPartition; + ExprList *pOrderBy = pMWin->pOrderBy; + int nPeer = pOrderBy ? pOrderBy->nExpr : 0; + int regNewPeer; + + int addrGoto; /* Address of Goto used to jump flush_par.. */ + int addrNext; /* Jump here for next iteration of loop */ + int regFlushPart; + int lblFlushPart; + int csrLead; + int regCtr; + int regArg; /* Register array to martial function args */ + int regSize; + int lblEmpty; + int bReverse = pMWin->pOrderBy && pMWin->eStart==TK_CURRENT + && pMWin->eEnd==TK_UNBOUNDED; + + assert( (pMWin->eStart==TK_UNBOUNDED && pMWin->eEnd==TK_CURRENT) + || (pMWin->eStart==TK_UNBOUNDED && pMWin->eEnd==TK_UNBOUNDED) + || (pMWin->eStart==TK_CURRENT && pMWin->eEnd==TK_CURRENT) + || (pMWin->eStart==TK_CURRENT && pMWin->eEnd==TK_UNBOUNDED) + ); + + lblEmpty = sqlite3VdbeMakeLabel(v); + regNewPeer = pParse->nMem+1; + pParse->nMem += nPeer; + + /* Allocate register and label for the "flush_partition" sub-routine. */ + regFlushPart = ++pParse->nMem; + lblFlushPart = sqlite3VdbeMakeLabel(v); + + csrLead = pParse->nTab++; + regCtr = ++pParse->nMem; + + windowPartitionCache(pParse, p, pWInfo, regFlushPart, lblFlushPart, ®Size); + addrGoto = sqlite3VdbeAddOp0(v, OP_Goto); + + /* Start of "flush_partition" */ + sqlite3VdbeResolveLabel(v, lblFlushPart); + sqlite3VdbeAddOp2(v, OP_Once, 0, sqlite3VdbeCurrentAddr(v)+2); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_OpenDup, csrLead, pMWin->iEphCsr); + + /* Initialize the accumulator register for each window function to NULL */ + regArg = windowInitAccum(pParse, pMWin); + + sqlite3VdbeAddOp2(v, OP_Integer, 0, regCtr); + sqlite3VdbeAddOp2(v, OP_Rewind, csrLead, lblEmpty); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Rewind, pMWin->iEphCsr, lblEmpty); + VdbeCoverageNeverTaken(v); + + if( bReverse ){ + int addr2 = sqlite3VdbeCurrentAddr(v); + windowAggStep(pParse, pMWin, csrLead, 0, regArg, regSize); + sqlite3VdbeAddOp2(v, OP_Next, csrLead, addr2); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Rewind, csrLead, lblEmpty); + VdbeCoverageNeverTaken(v); + } + addrNext = sqlite3VdbeCurrentAddr(v); + + if( pOrderBy && (pMWin->eEnd==TK_CURRENT || pMWin->eStart==TK_CURRENT) ){ + int bCurrent = (pMWin->eStart==TK_CURRENT); + int addrJump = 0; /* Address of OP_Jump below */ + if( pMWin->eType==TK_RANGE ){ + int iOff = pMWin->nBufferCol + (pPart ? pPart->nExpr : 0); + int regPeer = pMWin->regPart + (pPart ? pPart->nExpr : 0); + KeyInfo *pKeyInfo = sqlite3KeyInfoFromExprList(pParse, pOrderBy, 0, 0); + for(k=0; kiEphCsr); + sqlite3VdbeAddOp1(v, OP_Return, regFlushPart); + + /* Jump to here to skip over flush_partition */ + sqlite3VdbeJumpHere(v, addrGoto); +} + + +/* +** RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +** +** ... +** if( new partition ){ +** AggFinal (xFinalize) +** Gosub addrGosub +** ResetSorter eph-table +** } +** else if( new peer ){ +** AggFinal (xValue) +** Gosub addrGosub +** ResetSorter eph-table +** } +** AggStep +** Insert (record into eph-table) +** sqlite3WhereEnd() +** AggFinal (xFinalize) +** Gosub addrGosub +** +** RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING +** +** As above, except take no action for a "new peer". Invoke +** the sub-routine once only for each partition. +** +** RANGE BETWEEN CURRENT ROW AND CURRENT ROW +** +** As above, except that the "new peer" condition is handled in the +** same way as "new partition" (so there is no "else if" block). +** +** ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW +** +** As above, except assume every row is a "new peer". +*/ +static void windowCodeDefaultStep( + Parse *pParse, + Select *p, + WhereInfo *pWInfo, + int regGosub, + int addrGosub +){ + Window *pMWin = p->pWin; + Vdbe *v = sqlite3GetVdbe(pParse); + int k; + int iSubCsr = p->pSrc->a[0].iCursor; + int nSub = p->pSrc->a[0].pTab->nCol; + int reg = pParse->nMem+1; + int regRecord = reg+nSub; + int regRowid = regRecord+1; + int addr; + ExprList *pPart = pMWin->pPartition; + ExprList *pOrderBy = pMWin->pOrderBy; + + assert( pMWin->eType==TK_RANGE + || (pMWin->eStart==TK_UNBOUNDED && pMWin->eEnd==TK_CURRENT) + ); + + assert( (pMWin->eStart==TK_UNBOUNDED && pMWin->eEnd==TK_CURRENT) + || (pMWin->eStart==TK_UNBOUNDED && pMWin->eEnd==TK_UNBOUNDED) + || (pMWin->eStart==TK_CURRENT && pMWin->eEnd==TK_CURRENT) + || (pMWin->eStart==TK_CURRENT && pMWin->eEnd==TK_UNBOUNDED && !pOrderBy) + ); + + if( pMWin->eEnd==TK_UNBOUNDED ){ + pOrderBy = 0; + } + + pParse->nMem += nSub + 2; + + /* Load the individual column values of the row returned by + ** the sub-select into an array of registers. */ + for(k=0; knExpr : 0); + int addrGoto = 0; + int addrJump = 0; + int nPeer = (pOrderBy ? pOrderBy->nExpr : 0); + + if( pPart ){ + int regNewPart = reg + pMWin->nBufferCol; + KeyInfo *pKeyInfo = sqlite3KeyInfoFromExprList(pParse, pPart, 0, 0); + addr = sqlite3VdbeAddOp3(v, OP_Compare, regNewPart, pMWin->regPart,nPart); + sqlite3VdbeAppendP4(v, (void*)pKeyInfo, P4_KEYINFO); + addrJump = sqlite3VdbeAddOp3(v, OP_Jump, addr+2, 0, addr+2); + VdbeCoverageEqNe(v); + windowAggFinal(pParse, pMWin, 1); + if( pOrderBy ){ + addrGoto = sqlite3VdbeAddOp0(v, OP_Goto); + } + } + + if( pOrderBy ){ + int regNewPeer = reg + pMWin->nBufferCol + nPart; + int regPeer = pMWin->regPart + nPart; + + if( addrJump ) sqlite3VdbeJumpHere(v, addrJump); + if( pMWin->eType==TK_RANGE ){ + KeyInfo *pKeyInfo = sqlite3KeyInfoFromExprList(pParse, pOrderBy, 0, 0); + addr = sqlite3VdbeAddOp3(v, OP_Compare, regNewPeer, regPeer, nPeer); + sqlite3VdbeAppendP4(v, (void*)pKeyInfo, P4_KEYINFO); + addrJump = sqlite3VdbeAddOp3(v, OP_Jump, addr+2, 0, addr+2); + VdbeCoverage(v); + }else{ + addrJump = 0; + } + windowAggFinal(pParse, pMWin, pMWin->eStart==TK_CURRENT); + if( addrGoto ) sqlite3VdbeJumpHere(v, addrGoto); + } + + sqlite3VdbeAddOp2(v, OP_Rewind, pMWin->iEphCsr,sqlite3VdbeCurrentAddr(v)+3); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Gosub, regGosub, addrGosub); + sqlite3VdbeAddOp2(v, OP_Next, pMWin->iEphCsr, sqlite3VdbeCurrentAddr(v)-1); + VdbeCoverage(v); + + sqlite3VdbeAddOp1(v, OP_ResetSorter, pMWin->iEphCsr); + sqlite3VdbeAddOp3( + v, OP_Copy, reg+pMWin->nBufferCol, pMWin->regPart, nPart+nPeer-1 + ); + + if( addrJump ) sqlite3VdbeJumpHere(v, addrJump); + } + + /* Invoke step function for window functions */ + windowAggStep(pParse, pMWin, -1, 0, reg, 0); + + /* Buffer the current row in the ephemeral table. */ + if( pMWin->nBufferCol>0 ){ + sqlite3VdbeAddOp3(v, OP_MakeRecord, reg, pMWin->nBufferCol, regRecord); + }else{ + sqlite3VdbeAddOp2(v, OP_Blob, 0, regRecord); + sqlite3VdbeAppendP4(v, (void*)"", 0); + } + sqlite3VdbeAddOp2(v, OP_NewRowid, pMWin->iEphCsr, regRowid); + sqlite3VdbeAddOp3(v, OP_Insert, pMWin->iEphCsr, regRecord, regRowid); + + /* End the database scan loop. */ + sqlite3WhereEnd(pWInfo); + + windowAggFinal(pParse, pMWin, 1); + sqlite3VdbeAddOp2(v, OP_Rewind, pMWin->iEphCsr,sqlite3VdbeCurrentAddr(v)+3); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Gosub, regGosub, addrGosub); + sqlite3VdbeAddOp2(v, OP_Next, pMWin->iEphCsr, sqlite3VdbeCurrentAddr(v)-1); + VdbeCoverage(v); +} + +/* +** Allocate and return a duplicate of the Window object indicated by the +** third argument. Set the Window.pOwner field of the new object to +** pOwner. +*/ +SQLITE_PRIVATE Window *sqlite3WindowDup(sqlite3 *db, Expr *pOwner, Window *p){ + Window *pNew = 0; + if( ALWAYS(p) ){ + pNew = sqlite3DbMallocZero(db, sizeof(Window)); + if( pNew ){ + pNew->zName = sqlite3DbStrDup(db, p->zName); + pNew->pFilter = sqlite3ExprDup(db, p->pFilter, 0); + pNew->pPartition = sqlite3ExprListDup(db, p->pPartition, 0); + pNew->pOrderBy = sqlite3ExprListDup(db, p->pOrderBy, 0); + pNew->eType = p->eType; + pNew->eEnd = p->eEnd; + pNew->eStart = p->eStart; + pNew->pStart = sqlite3ExprDup(db, p->pStart, 0); + pNew->pEnd = sqlite3ExprDup(db, p->pEnd, 0); + pNew->pOwner = pOwner; + } + } + return pNew; +} + +/* +** Return a copy of the linked list of Window objects passed as the +** second argument. +*/ +SQLITE_PRIVATE Window *sqlite3WindowListDup(sqlite3 *db, Window *p){ + Window *pWin; + Window *pRet = 0; + Window **pp = &pRet; + + for(pWin=p; pWin; pWin=pWin->pNextWin){ + *pp = sqlite3WindowDup(db, 0, pWin); + if( *pp==0 ) break; + pp = &((*pp)->pNextWin); + } + + return pRet; +} + +/* +** sqlite3WhereBegin() has already been called for the SELECT statement +** passed as the second argument when this function is invoked. It generates +** code to populate the Window.regResult register for each window function and +** invoke the sub-routine at instruction addrGosub once for each row. +** This function calls sqlite3WhereEnd() before returning. +*/ +SQLITE_PRIVATE void sqlite3WindowCodeStep( + Parse *pParse, /* Parse context */ + Select *p, /* Rewritten SELECT statement */ + WhereInfo *pWInfo, /* Context returned by sqlite3WhereBegin() */ + int regGosub, /* Register for OP_Gosub */ + int addrGosub /* OP_Gosub here to return each row */ +){ + Window *pMWin = p->pWin; + + /* There are three different functions that may be used to do the work + ** of this one, depending on the window frame and the specific built-in + ** window functions used (if any). + ** + ** windowCodeRowExprStep() handles all "ROWS" window frames, except for: + ** + ** ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW + ** + ** The exception is because windowCodeRowExprStep() implements all window + ** frame types by caching the entire partition in a temp table, and + ** "ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW" is easy enough to + ** implement without such a cache. + ** + ** windowCodeCacheStep() is used for: + ** + ** RANGE BETWEEN CURRENT ROW AND UNBOUNDED FOLLOWING + ** + ** It is also used for anything not handled by windowCodeRowExprStep() + ** that invokes a built-in window function that requires the entire + ** partition to be cached in a temp table before any rows are returned + ** (e.g. nth_value() or percent_rank()). + ** + ** Finally, assuming there is no built-in window function that requires + ** the partition to be cached, windowCodeDefaultStep() is used for: + ** + ** RANGE BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW + ** RANGE BETWEEN UNBOUNDED PRECEDING AND UNBOUNDED FOLLOWING + ** RANGE BETWEEN CURRENT ROW AND CURRENT ROW + ** ROWS BETWEEN UNBOUNDED PRECEDING AND CURRENT ROW + ** + ** windowCodeDefaultStep() is the only one of the three functions that + ** does not cache each partition in a temp table before beginning to + ** return rows. + */ + if( pMWin->eType==TK_ROWS + && (pMWin->eStart!=TK_UNBOUNDED||pMWin->eEnd!=TK_CURRENT||!pMWin->pOrderBy) + ){ + VdbeModuleComment((pParse->pVdbe, "Begin RowExprStep()")); + windowCodeRowExprStep(pParse, p, pWInfo, regGosub, addrGosub); + }else{ + Window *pWin; + int bCache = 0; /* True to use CacheStep() */ + + if( pMWin->eStart==TK_CURRENT && pMWin->eEnd==TK_UNBOUNDED ){ + bCache = 1; + }else{ + for(pWin=pMWin; pWin; pWin=pWin->pNextWin){ + FuncDef *pFunc = pWin->pFunc; + if( (pFunc->funcFlags & SQLITE_FUNC_WINDOW_SIZE) + || (pFunc->zName==nth_valueName) + || (pFunc->zName==first_valueName) + || (pFunc->zName==leadName) + || (pFunc->zName==lagName) + ){ + bCache = 1; + break; + } + } + } + + /* Otherwise, call windowCodeDefaultStep(). */ + if( bCache ){ + VdbeModuleComment((pParse->pVdbe, "Begin CacheStep()")); + windowCodeCacheStep(pParse, p, pWInfo, regGosub, addrGosub); + }else{ + VdbeModuleComment((pParse->pVdbe, "Begin DefaultStep()")); + windowCodeDefaultStep(pParse, p, pWInfo, regGosub, addrGosub); + } + } +} + +#endif /* SQLITE_OMIT_WINDOWFUNC */ + +/************** End of window.c **********************************************/ /************** Begin file parse.c *******************************************/ /* ** 2000-05-29 @@ -136559,6 +146829,7 @@ ** input grammar file: */ /* #include */ +/* #include */ /************ Begin %include sections from the grammar ************************/ /* #include "sqliteInt.h" */ @@ -136600,15 +146871,6 @@ #define YYMALLOCARGTYPE u64 /* -** An instance of this structure holds information about the -** LIMIT clause of a SELECT statement. -*/ -struct LimitVal { - Expr *pLimit; /* The LIMIT expression. NULL if there is no limit */ - Expr *pOffset; /* The OFFSET expression. NULL if there is none */ -}; - -/* ** An instance of the following structure describes the event of a ** TRIGGER. "a" is the event type, one of TK_UPDATE, TK_INSERT, ** TK_DELETE, or TK_INSTEAD. If the event is of the form @@ -136619,6 +146881,8 @@ */ struct TrigEvent { int a; IdList * b; }; +struct FrameBound { int eType; Expr *pExpr; }; + /* ** Disable lookaside memory allocation for objects that might be ** shared across database connections. @@ -136651,26 +146915,26 @@ } } - /* This is a utility routine used to set the ExprSpan.zStart and - ** ExprSpan.zEnd values of pOut so that the span covers the complete - ** range of text beginning with pStart and going to the end of pEnd. - */ - static void spanSet(ExprSpan *pOut, Token *pStart, Token *pEnd){ - pOut->zStart = pStart->z; - pOut->zEnd = &pEnd->z[pEnd->n]; - } /* Construct a new Expr object from a single identifier. Use the ** new Expr to populate pOut. Set the span of pOut to be the identifier ** that created the expression. */ - static void spanExpr(ExprSpan *pOut, Parse *pParse, int op, Token t){ + static Expr *tokenExpr(Parse *pParse, int op, Token t){ Expr *p = sqlite3DbMallocRawNN(pParse->db, sizeof(Expr)+t.n+1); if( p ){ - memset(p, 0, sizeof(Expr)); + /* memset(p, 0, sizeof(Expr)); */ p->op = (u8)op; + p->affinity = 0; p->flags = EP_Leaf; p->iAgg = -1; + p->pLeft = p->pRight = 0; + p->x.pList = 0; + p->pAggInfo = 0; + p->y.pTab = 0; + p->op2 = 0; + p->iTable = 0; + p->iColumn = 0; p->u.zToken = (char*)&p[1]; memcpy(p->u.zToken, t.z, t.n); p->u.zToken[t.n] = 0; @@ -136681,51 +146945,19 @@ #if SQLITE_MAX_EXPR_DEPTH>0 p->nHeight = 1; #endif + if( IN_RENAME_OBJECT ){ + return (Expr*)sqlite3RenameTokenMap(pParse, (void*)p, &t); + } } - pOut->pExpr = p; - pOut->zStart = t.z; - pOut->zEnd = &t.z[t.n]; + return p; } - /* This routine constructs a binary expression node out of two ExprSpan - ** objects and uses the result to populate a new ExprSpan object. - */ - static void spanBinaryExpr( - Parse *pParse, /* The parsing context. Errors accumulate here */ - int op, /* The binary operation */ - ExprSpan *pLeft, /* The left operand, and output */ - ExprSpan *pRight /* The right operand */ - ){ - pLeft->pExpr = sqlite3PExpr(pParse, op, pLeft->pExpr, pRight->pExpr); - pLeft->zEnd = pRight->zEnd; - } - /* If doNot is true, then add a TK_NOT Expr-node wrapper around the - ** outside of *ppExpr. - */ - static void exprNot(Parse *pParse, int doNot, ExprSpan *pSpan){ - if( doNot ){ - pSpan->pExpr = sqlite3PExpr(pParse, TK_NOT, pSpan->pExpr, 0); - } - } - - /* Construct an expression node for a unary postfix operator - */ - static void spanUnaryPostfix( - Parse *pParse, /* Parsing context to record errors */ - int op, /* The operator */ - ExprSpan *pOperand, /* The operand, and output */ - Token *pPostOp /* The operand token for setting the span */ - ){ - pOperand->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0); - pOperand->zEnd = &pPostOp->z[pPostOp->n]; - } - /* A routine to convert a binary TK_IS or TK_ISNOT expression into a ** unary TK_ISNULL or TK_NOTNULL expression. */ static void binaryToUnaryIfNull(Parse *pParse, Expr *pY, Expr *pA, int op){ sqlite3 *db = pParse->db; - if( pA && pY && pY->op==TK_NULL ){ + if( pA && pY && pY->op==TK_NULL && !IN_RENAME_OBJECT ){ pA->op = (u8)op; sqlite3ExprDelete(db, pA->pRight); pA->pRight = 0; @@ -136732,20 +146964,6 @@ } } - /* Construct an expression node for a unary prefix operator - */ - static void spanUnaryPrefix( - ExprSpan *pOut, /* Write the new expression node here */ - Parse *pParse, /* Parsing context to record errors */ - int op, /* The operator */ - ExprSpan *pOperand, /* The operand */ - Token *pPreOp /* The operand token for setting the span */ - ){ - pOut->zStart = pPreOp->z; - pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0); - pOut->zEnd = pOperand->zEnd; - } - /* Add a single new term to an ExprList that is used to store a ** list of identifiers. Report an error if the ID list contains ** a COLLATE clause or an ASC or DESC keyword, except ignore the @@ -136808,64 +147026,78 @@ ** zero the stack is dynamically sized using realloc() ** sqlite3ParserARG_SDECL A static variable declaration for the %extra_argument ** sqlite3ParserARG_PDECL A parameter declaration for the %extra_argument +** sqlite3ParserARG_PARAM Code to pass %extra_argument as a subroutine parameter ** sqlite3ParserARG_STORE Code to store %extra_argument into yypParser ** sqlite3ParserARG_FETCH Code to extract %extra_argument from yypParser +** sqlite3ParserCTX_* As sqlite3ParserARG_ except for %extra_context ** YYERRORSYMBOL is the code number of the error symbol. If not ** defined, then do no error processing. ** YYNSTATE the combined number of states. ** YYNRULE the number of rules in the grammar +** YYNTOKEN Number of terminal symbols ** YY_MAX_SHIFT Maximum value for shift actions ** YY_MIN_SHIFTREDUCE Minimum value for shift-reduce actions ** YY_MAX_SHIFTREDUCE Maximum value for shift-reduce actions -** YY_MIN_REDUCE Maximum value for reduce actions ** YY_ERROR_ACTION The yy_action[] code for syntax error ** YY_ACCEPT_ACTION The yy_action[] code for accept ** YY_NO_ACTION The yy_action[] code for no-op +** YY_MIN_REDUCE Minimum value for reduce actions +** YY_MAX_REDUCE Maximum value for reduce actions */ #ifndef INTERFACE # define INTERFACE 1 #endif /************* Begin control #defines *****************************************/ -#define YYCODETYPE unsigned char -#define YYNOCODE 252 +#define YYCODETYPE unsigned short int +#define YYNOCODE 277 #define YYACTIONTYPE unsigned short int -#define YYWILDCARD 69 +#define YYWILDCARD 91 #define sqlite3ParserTOKENTYPE Token typedef union { int yyinit; sqlite3ParserTOKENTYPE yy0; - Expr* yy72; - TriggerStep* yy145; - ExprList* yy148; - SrcList* yy185; - ExprSpan yy190; - int yy194; - Select* yy243; - IdList* yy254; - With* yy285; - struct TrigEvent yy332; - struct LimitVal yy354; - struct {int value; int mask;} yy497; + Expr* yy18; + struct TrigEvent yy34; + IdList* yy48; + int yy70; + struct {int value; int mask;} yy111; + struct FrameBound yy119; + SrcList* yy135; + TriggerStep* yy207; + Window* yy327; + Upsert* yy340; + const char* yy392; + ExprList* yy420; + With* yy449; + Select* yy489; } YYMINORTYPE; #ifndef YYSTACKDEPTH #define YYSTACKDEPTH 100 #endif -#define sqlite3ParserARG_SDECL Parse *pParse; -#define sqlite3ParserARG_PDECL ,Parse *pParse -#define sqlite3ParserARG_FETCH Parse *pParse = yypParser->pParse -#define sqlite3ParserARG_STORE yypParser->pParse = pParse +#define sqlite3ParserARG_SDECL +#define sqlite3ParserARG_PDECL +#define sqlite3ParserARG_PARAM +#define sqlite3ParserARG_FETCH +#define sqlite3ParserARG_STORE +#define sqlite3ParserCTX_SDECL Parse *pParse; +#define sqlite3ParserCTX_PDECL ,Parse *pParse +#define sqlite3ParserCTX_PARAM ,pParse +#define sqlite3ParserCTX_FETCH Parse *pParse=yypParser->pParse; +#define sqlite3ParserCTX_STORE yypParser->pParse=pParse; #define YYFALLBACK 1 -#define YYNSTATE 455 -#define YYNRULE 329 -#define YY_MAX_SHIFT 454 -#define YY_MIN_SHIFTREDUCE 664 -#define YY_MAX_SHIFTREDUCE 992 -#define YY_MIN_REDUCE 993 -#define YY_MAX_REDUCE 1321 -#define YY_ERROR_ACTION 1322 -#define YY_ACCEPT_ACTION 1323 -#define YY_NO_ACTION 1324 +#define YYNSTATE 521 +#define YYNRULE 367 +#define YYNTOKEN 155 +#define YY_MAX_SHIFT 520 +#define YY_MIN_SHIFTREDUCE 756 +#define YY_MAX_SHIFTREDUCE 1122 +#define YY_ERROR_ACTION 1123 +#define YY_ACCEPT_ACTION 1124 +#define YY_NO_ACTION 1125 +#define YY_MIN_REDUCE 1126 +#define YY_MAX_REDUCE 1492 /************* End control #defines *******************************************/ +#define YY_NLOOKAHEAD ((int)(sizeof(yy_lookahead)/sizeof(yy_lookahead[0]))) /* Define the yytestcase() macro to be a no-op if is not already defined ** otherwise. @@ -136894,9 +147126,6 @@ ** N between YY_MIN_SHIFTREDUCE Shift to an arbitrary state then ** and YY_MAX_SHIFTREDUCE reduce by rule N-YY_MIN_SHIFTREDUCE. ** -** N between YY_MIN_REDUCE Reduce by rule N-YY_MIN_REDUCE -** and YY_MAX_REDUCE -** ** N == YY_ERROR_ACTION A syntax error has occurred. ** ** N == YY_ACCEPT_ACTION The parser accepts its input. @@ -136904,6 +147133,9 @@ ** N == YY_NO_ACTION No such action. Denotes unused ** slots in the yy_action[] table. ** +** N between YY_MIN_REDUCE Reduce by rule N-YY_MIN_REDUCE +** and YY_MAX_REDUCE +** ** The action table is constructed as a single large table named yy_action[]. ** Given state S and lookahead X, the action is computed as either: ** @@ -136910,19 +147142,13 @@ ** (A) N = yy_action[ yy_shift_ofst[S] + X ] ** (B) N = yy_default[S] ** -** The (A) formula is preferred. The B formula is used instead if: -** (1) The yy_shift_ofst[S]+X value is out of range, or -** (2) yy_lookahead[yy_shift_ofst[S]+X] is not equal to X, or -** (3) yy_shift_ofst[S] equal YY_SHIFT_USE_DFLT. -** (Implementation note: YY_SHIFT_USE_DFLT is chosen so that -** YY_SHIFT_USE_DFLT+X will be out of range for all possible lookaheads X. -** Hence only tests (1) and (2) need to be evaluated.) +** The (A) formula is preferred. The B formula is used instead if +** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X. ** ** The formulas above are for computing the action when the lookahead is ** a terminal symbol. If the lookahead is a non-terminal (as occurs after ** a reduce action) then the yy_reduce_ofst[] array is used in place of -** the yy_shift_ofst[] array and YY_REDUCE_USE_DFLT is used in place of -** YY_SHIFT_USE_DFLT. +** the yy_shift_ofst[] array. ** ** The following are the tables generated in this section: ** @@ -136936,463 +147162,568 @@ ** yy_default[] Default action for each state. ** *********** Begin parsing tables **********************************************/ -#define YY_ACTTAB_COUNT (1565) +#define YY_ACTTAB_COUNT (2009) static const YYACTIONTYPE yy_action[] = { - /* 0 */ 324, 410, 342, 747, 747, 203, 939, 353, 969, 98, - /* 10 */ 98, 98, 98, 91, 96, 96, 96, 96, 95, 95, - /* 20 */ 94, 94, 94, 93, 350, 1323, 155, 155, 2, 808, - /* 30 */ 971, 971, 98, 98, 98, 98, 20, 96, 96, 96, - /* 40 */ 96, 95, 95, 94, 94, 94, 93, 350, 92, 89, - /* 50 */ 178, 99, 100, 90, 847, 850, 839, 839, 97, 97, - /* 60 */ 98, 98, 98, 98, 350, 96, 96, 96, 96, 95, - /* 70 */ 95, 94, 94, 94, 93, 350, 324, 339, 969, 262, - /* 80 */ 364, 251, 212, 169, 287, 404, 282, 403, 199, 786, - /* 90 */ 242, 411, 21, 950, 378, 280, 93, 350, 787, 95, - /* 100 */ 95, 94, 94, 94, 93, 350, 971, 971, 96, 96, - /* 110 */ 96, 96, 95, 95, 94, 94, 94, 93, 350, 808, - /* 120 */ 328, 242, 411, 1235, 826, 1235, 132, 99, 100, 90, - /* 130 */ 847, 850, 839, 839, 97, 97, 98, 98, 98, 98, - /* 140 */ 449, 96, 96, 96, 96, 95, 95, 94, 94, 94, - /* 150 */ 93, 350, 324, 819, 348, 347, 120, 818, 120, 75, - /* 160 */ 52, 52, 950, 951, 952, 1084, 977, 146, 360, 262, - /* 170 */ 369, 261, 950, 975, 954, 976, 92, 89, 178, 370, - /* 180 */ 230, 370, 971, 971, 1141, 360, 359, 101, 818, 818, - /* 190 */ 820, 383, 24, 1286, 380, 427, 412, 368, 978, 379, - /* 200 */ 978, 1032, 324, 99, 100, 90, 847, 850, 839, 839, - /* 210 */ 97, 97, 98, 98, 98, 98, 372, 96, 96, 96, - /* 220 */ 96, 95, 95, 94, 94, 94, 93, 350, 950, 132, - /* 230 */ 890, 449, 971, 971, 890, 60, 94, 94, 94, 93, - /* 240 */ 350, 950, 951, 952, 954, 103, 360, 950, 384, 333, - /* 250 */ 697, 52, 52, 99, 100, 90, 847, 850, 839, 839, - /* 260 */ 97, 97, 98, 98, 98, 98, 1022, 96, 96, 96, - /* 270 */ 96, 95, 95, 94, 94, 94, 93, 350, 324, 454, - /* 280 */ 995, 449, 227, 61, 157, 243, 343, 114, 1025, 1211, - /* 290 */ 147, 826, 950, 372, 1071, 950, 319, 950, 951, 952, - /* 300 */ 194, 10, 10, 401, 398, 397, 1211, 1213, 971, 971, - /* 310 */ 757, 171, 170, 157, 396, 336, 950, 951, 952, 697, - /* 320 */ 819, 310, 153, 950, 818, 320, 82, 23, 80, 99, - /* 330 */ 100, 90, 847, 850, 839, 839, 97, 97, 98, 98, - /* 340 */ 98, 98, 888, 96, 96, 96, 96, 95, 95, 94, - /* 350 */ 94, 94, 93, 350, 324, 818, 818, 820, 277, 231, - /* 360 */ 300, 950, 951, 952, 950, 951, 952, 1211, 194, 25, - /* 370 */ 449, 401, 398, 397, 950, 354, 300, 449, 950, 74, - /* 380 */ 449, 1, 396, 132, 971, 971, 950, 224, 224, 808, - /* 390 */ 10, 10, 950, 951, 952, 1290, 132, 52, 52, 414, - /* 400 */ 52, 52, 1063, 1063, 338, 99, 100, 90, 847, 850, - /* 410 */ 839, 839, 97, 97, 98, 98, 98, 98, 1114, 96, - /* 420 */ 96, 96, 96, 95, 95, 94, 94, 94, 93, 350, - /* 430 */ 324, 1113, 427, 417, 701, 427, 426, 1260, 1260, 262, - /* 440 */ 369, 261, 950, 950, 951, 952, 752, 950, 951, 952, - /* 450 */ 449, 751, 449, 1058, 1037, 950, 951, 952, 442, 706, - /* 460 */ 971, 971, 1058, 393, 92, 89, 178, 446, 446, 446, - /* 470 */ 51, 51, 52, 52, 438, 773, 1024, 92, 89, 178, - /* 480 */ 172, 99, 100, 90, 847, 850, 839, 839, 97, 97, - /* 490 */ 98, 98, 98, 98, 198, 96, 96, 96, 96, 95, - /* 500 */ 95, 94, 94, 94, 93, 350, 324, 427, 407, 909, - /* 510 */ 694, 950, 951, 952, 92, 89, 178, 224, 224, 157, - /* 520 */ 241, 221, 418, 299, 771, 910, 415, 374, 449, 414, - /* 530 */ 58, 323, 1061, 1061, 1242, 378, 971, 971, 378, 772, - /* 540 */ 448, 911, 362, 735, 296, 681, 9, 9, 52, 52, - /* 550 */ 234, 329, 234, 256, 416, 736, 280, 99, 100, 90, - /* 560 */ 847, 850, 839, 839, 97, 97, 98, 98, 98, 98, - /* 570 */ 449, 96, 96, 96, 96, 95, 95, 94, 94, 94, - /* 580 */ 93, 350, 324, 422, 72, 449, 827, 120, 367, 449, - /* 590 */ 10, 10, 5, 301, 203, 449, 177, 969, 253, 419, - /* 600 */ 255, 771, 200, 175, 233, 10, 10, 836, 836, 36, - /* 610 */ 36, 1289, 971, 971, 724, 37, 37, 348, 347, 424, - /* 620 */ 203, 260, 771, 969, 232, 930, 1316, 870, 337, 1316, - /* 630 */ 421, 848, 851, 99, 100, 90, 847, 850, 839, 839, - /* 640 */ 97, 97, 98, 98, 98, 98, 268, 96, 96, 96, - /* 650 */ 96, 95, 95, 94, 94, 94, 93, 350, 324, 840, - /* 660 */ 449, 978, 813, 978, 1200, 449, 909, 969, 715, 349, - /* 670 */ 349, 349, 928, 177, 449, 930, 1317, 254, 198, 1317, - /* 680 */ 12, 12, 910, 402, 449, 27, 27, 250, 971, 971, - /* 690 */ 118, 716, 162, 969, 38, 38, 268, 176, 911, 771, - /* 700 */ 432, 1265, 939, 353, 39, 39, 316, 991, 324, 99, - /* 710 */ 100, 90, 847, 850, 839, 839, 97, 97, 98, 98, - /* 720 */ 98, 98, 928, 96, 96, 96, 96, 95, 95, 94, - /* 730 */ 94, 94, 93, 350, 449, 329, 449, 357, 971, 971, - /* 740 */ 1041, 316, 929, 340, 893, 893, 386, 669, 670, 671, - /* 750 */ 275, 1318, 317, 992, 40, 40, 41, 41, 268, 99, - /* 760 */ 100, 90, 847, 850, 839, 839, 97, 97, 98, 98, - /* 770 */ 98, 98, 449, 96, 96, 96, 96, 95, 95, 94, - /* 780 */ 94, 94, 93, 350, 324, 449, 355, 449, 992, 449, - /* 790 */ 1016, 330, 42, 42, 786, 270, 449, 273, 449, 228, - /* 800 */ 449, 298, 449, 787, 449, 28, 28, 29, 29, 31, - /* 810 */ 31, 449, 1141, 449, 971, 971, 43, 43, 44, 44, - /* 820 */ 45, 45, 11, 11, 46, 46, 887, 78, 887, 268, - /* 830 */ 268, 105, 105, 47, 47, 99, 100, 90, 847, 850, - /* 840 */ 839, 839, 97, 97, 98, 98, 98, 98, 449, 96, - /* 850 */ 96, 96, 96, 95, 95, 94, 94, 94, 93, 350, - /* 860 */ 324, 449, 117, 449, 1073, 158, 449, 691, 48, 48, - /* 870 */ 229, 1241, 449, 1250, 449, 414, 449, 334, 449, 245, - /* 880 */ 449, 33, 33, 49, 49, 449, 50, 50, 246, 1141, - /* 890 */ 971, 971, 34, 34, 122, 122, 123, 123, 124, 124, - /* 900 */ 56, 56, 268, 81, 249, 35, 35, 197, 196, 195, - /* 910 */ 324, 99, 100, 90, 847, 850, 839, 839, 97, 97, - /* 920 */ 98, 98, 98, 98, 449, 96, 96, 96, 96, 95, - /* 930 */ 95, 94, 94, 94, 93, 350, 449, 691, 449, 1141, - /* 940 */ 971, 971, 968, 1207, 106, 106, 268, 1209, 268, 1266, - /* 950 */ 2, 886, 268, 886, 335, 1040, 53, 53, 107, 107, - /* 960 */ 324, 99, 100, 90, 847, 850, 839, 839, 97, 97, - /* 970 */ 98, 98, 98, 98, 449, 96, 96, 96, 96, 95, - /* 980 */ 95, 94, 94, 94, 93, 350, 449, 1070, 449, 1066, - /* 990 */ 971, 971, 1039, 267, 108, 108, 445, 330, 331, 133, - /* 1000 */ 223, 175, 301, 225, 385, 1255, 104, 104, 121, 121, - /* 1010 */ 324, 99, 88, 90, 847, 850, 839, 839, 97, 97, - /* 1020 */ 98, 98, 98, 98, 1141, 96, 96, 96, 96, 95, - /* 1030 */ 95, 94, 94, 94, 93, 350, 449, 346, 449, 167, - /* 1040 */ 971, 971, 925, 810, 371, 318, 202, 202, 373, 263, - /* 1050 */ 394, 202, 74, 208, 721, 722, 119, 119, 112, 112, - /* 1060 */ 324, 406, 100, 90, 847, 850, 839, 839, 97, 97, - /* 1070 */ 98, 98, 98, 98, 449, 96, 96, 96, 96, 95, - /* 1080 */ 95, 94, 94, 94, 93, 350, 449, 752, 449, 344, - /* 1090 */ 971, 971, 751, 278, 111, 111, 74, 714, 713, 704, - /* 1100 */ 286, 877, 749, 1279, 257, 77, 109, 109, 110, 110, - /* 1110 */ 1230, 285, 1134, 90, 847, 850, 839, 839, 97, 97, - /* 1120 */ 98, 98, 98, 98, 1233, 96, 96, 96, 96, 95, - /* 1130 */ 95, 94, 94, 94, 93, 350, 86, 444, 449, 3, - /* 1140 */ 1193, 449, 1069, 132, 351, 120, 1013, 86, 444, 780, - /* 1150 */ 3, 1091, 202, 376, 447, 351, 1229, 120, 55, 55, - /* 1160 */ 449, 57, 57, 822, 873, 447, 449, 208, 449, 704, - /* 1170 */ 449, 877, 237, 433, 435, 120, 439, 428, 361, 120, - /* 1180 */ 54, 54, 132, 449, 433, 826, 52, 52, 26, 26, - /* 1190 */ 30, 30, 381, 132, 408, 443, 826, 689, 264, 389, - /* 1200 */ 116, 269, 272, 32, 32, 83, 84, 120, 274, 120, - /* 1210 */ 120, 276, 85, 351, 451, 450, 83, 84, 818, 1054, - /* 1220 */ 1038, 427, 429, 85, 351, 451, 450, 120, 120, 818, - /* 1230 */ 377, 218, 281, 822, 1107, 1140, 86, 444, 409, 3, - /* 1240 */ 1087, 1098, 430, 431, 351, 302, 303, 1146, 1021, 818, - /* 1250 */ 818, 820, 821, 19, 447, 1015, 1004, 1003, 1005, 1273, - /* 1260 */ 818, 818, 820, 821, 19, 289, 159, 291, 293, 7, - /* 1270 */ 315, 173, 259, 433, 1129, 363, 252, 1232, 375, 1037, - /* 1280 */ 295, 434, 168, 986, 399, 826, 284, 1204, 1203, 205, - /* 1290 */ 1276, 308, 1249, 86, 444, 983, 3, 1247, 332, 144, - /* 1300 */ 130, 351, 72, 135, 59, 83, 84, 756, 137, 365, - /* 1310 */ 1126, 447, 85, 351, 451, 450, 139, 226, 818, 140, - /* 1320 */ 156, 62, 314, 314, 313, 215, 311, 366, 392, 678, - /* 1330 */ 433, 185, 141, 1234, 142, 160, 148, 1136, 1198, 382, - /* 1340 */ 189, 67, 826, 180, 388, 248, 1218, 1099, 219, 818, - /* 1350 */ 818, 820, 821, 19, 247, 190, 266, 154, 390, 271, - /* 1360 */ 191, 192, 83, 84, 1006, 405, 1057, 182, 321, 85, - /* 1370 */ 351, 451, 450, 1056, 183, 818, 341, 132, 181, 706, - /* 1380 */ 1055, 420, 76, 444, 1029, 3, 322, 1028, 283, 1048, - /* 1390 */ 351, 1095, 1027, 1288, 1047, 71, 204, 6, 288, 290, - /* 1400 */ 447, 1096, 1094, 1093, 79, 292, 818, 818, 820, 821, - /* 1410 */ 19, 294, 297, 437, 345, 441, 102, 1184, 1077, 433, - /* 1420 */ 238, 425, 73, 305, 239, 304, 325, 240, 423, 306, - /* 1430 */ 307, 826, 213, 1012, 22, 945, 452, 214, 216, 217, - /* 1440 */ 453, 1001, 115, 996, 125, 126, 235, 127, 665, 352, - /* 1450 */ 326, 83, 84, 358, 166, 244, 179, 327, 85, 351, - /* 1460 */ 451, 450, 134, 356, 818, 113, 885, 806, 883, 136, - /* 1470 */ 128, 138, 738, 258, 184, 899, 143, 145, 63, 64, - /* 1480 */ 65, 66, 129, 902, 187, 186, 898, 8, 13, 188, - /* 1490 */ 265, 891, 149, 202, 980, 818, 818, 820, 821, 19, - /* 1500 */ 150, 387, 161, 680, 285, 391, 151, 395, 400, 193, - /* 1510 */ 68, 14, 236, 279, 15, 69, 717, 825, 131, 824, - /* 1520 */ 853, 70, 746, 16, 413, 750, 4, 174, 220, 222, - /* 1530 */ 152, 779, 857, 774, 201, 77, 74, 868, 17, 854, - /* 1540 */ 852, 908, 18, 907, 207, 206, 934, 163, 436, 210, - /* 1550 */ 935, 164, 209, 165, 440, 856, 823, 690, 87, 211, - /* 1560 */ 309, 312, 1281, 940, 1280, + /* 0 */ 368, 105, 102, 197, 105, 102, 197, 515, 1124, 1, + /* 10 */ 1, 520, 2, 1128, 515, 1192, 1171, 1456, 275, 370, + /* 20 */ 127, 1389, 1197, 1197, 1192, 1166, 178, 1205, 64, 64, + /* 30 */ 477, 887, 322, 428, 348, 37, 37, 808, 362, 888, + /* 40 */ 509, 509, 509, 112, 113, 103, 1100, 1100, 953, 956, + /* 50 */ 946, 946, 110, 110, 111, 111, 111, 111, 365, 252, + /* 60 */ 252, 515, 252, 252, 497, 515, 309, 515, 459, 515, + /* 70 */ 1079, 491, 512, 478, 6, 512, 809, 134, 498, 228, + /* 80 */ 194, 428, 37, 37, 515, 208, 64, 64, 64, 64, + /* 90 */ 13, 13, 109, 109, 109, 109, 108, 108, 107, 107, + /* 100 */ 107, 106, 401, 258, 381, 13, 13, 398, 397, 428, + /* 110 */ 252, 252, 370, 476, 405, 1104, 1079, 1080, 1081, 386, + /* 120 */ 1106, 390, 497, 512, 497, 1423, 1419, 304, 1105, 307, + /* 130 */ 1256, 496, 370, 499, 16, 16, 112, 113, 103, 1100, + /* 140 */ 1100, 953, 956, 946, 946, 110, 110, 111, 111, 111, + /* 150 */ 111, 262, 1107, 495, 1107, 401, 112, 113, 103, 1100, + /* 160 */ 1100, 953, 956, 946, 946, 110, 110, 111, 111, 111, + /* 170 */ 111, 129, 1425, 343, 1420, 339, 1059, 492, 1057, 263, + /* 180 */ 73, 105, 102, 197, 994, 109, 109, 109, 109, 108, + /* 190 */ 108, 107, 107, 107, 106, 401, 370, 111, 111, 111, + /* 200 */ 111, 104, 492, 89, 1432, 109, 109, 109, 109, 108, + /* 210 */ 108, 107, 107, 107, 106, 401, 111, 111, 111, 111, + /* 220 */ 112, 113, 103, 1100, 1100, 953, 956, 946, 946, 110, + /* 230 */ 110, 111, 111, 111, 111, 109, 109, 109, 109, 108, + /* 240 */ 108, 107, 107, 107, 106, 401, 114, 108, 108, 107, + /* 250 */ 107, 107, 106, 401, 109, 109, 109, 109, 108, 108, + /* 260 */ 107, 107, 107, 106, 401, 152, 399, 399, 399, 109, + /* 270 */ 109, 109, 109, 108, 108, 107, 107, 107, 106, 401, + /* 280 */ 178, 493, 1412, 434, 1037, 1486, 1079, 515, 1486, 370, + /* 290 */ 421, 297, 357, 412, 74, 1079, 109, 109, 109, 109, + /* 300 */ 108, 108, 107, 107, 107, 106, 401, 1413, 37, 37, + /* 310 */ 1431, 274, 506, 112, 113, 103, 1100, 1100, 953, 956, + /* 320 */ 946, 946, 110, 110, 111, 111, 111, 111, 1436, 520, + /* 330 */ 2, 1128, 1079, 1080, 1081, 430, 275, 1079, 127, 366, + /* 340 */ 933, 1079, 1080, 1081, 220, 1205, 913, 458, 455, 454, + /* 350 */ 392, 167, 515, 1035, 152, 445, 924, 453, 152, 874, + /* 360 */ 923, 289, 109, 109, 109, 109, 108, 108, 107, 107, + /* 370 */ 107, 106, 401, 13, 13, 261, 853, 252, 252, 227, + /* 380 */ 106, 401, 370, 1079, 1080, 1081, 311, 388, 1079, 296, + /* 390 */ 512, 923, 923, 925, 231, 323, 1255, 1388, 1423, 490, + /* 400 */ 274, 506, 12, 208, 274, 506, 112, 113, 103, 1100, + /* 410 */ 1100, 953, 956, 946, 946, 110, 110, 111, 111, 111, + /* 420 */ 111, 1440, 286, 1128, 288, 1079, 1097, 247, 275, 1098, + /* 430 */ 127, 387, 405, 389, 1079, 1080, 1081, 1205, 159, 238, + /* 440 */ 255, 321, 461, 316, 460, 225, 790, 105, 102, 197, + /* 450 */ 513, 314, 842, 842, 445, 109, 109, 109, 109, 108, + /* 460 */ 108, 107, 107, 107, 106, 401, 515, 514, 515, 252, + /* 470 */ 252, 1079, 1080, 1081, 435, 370, 1098, 933, 1460, 794, + /* 480 */ 274, 506, 512, 105, 102, 197, 336, 63, 63, 64, + /* 490 */ 64, 27, 790, 924, 287, 208, 1354, 923, 515, 112, + /* 500 */ 113, 103, 1100, 1100, 953, 956, 946, 946, 110, 110, + /* 510 */ 111, 111, 111, 111, 107, 107, 107, 106, 401, 49, + /* 520 */ 49, 515, 28, 1079, 405, 497, 421, 297, 923, 923, + /* 530 */ 925, 186, 468, 1079, 467, 999, 999, 442, 515, 1079, + /* 540 */ 334, 515, 45, 45, 1083, 342, 173, 168, 109, 109, + /* 550 */ 109, 109, 108, 108, 107, 107, 107, 106, 401, 13, + /* 560 */ 13, 205, 13, 13, 252, 252, 1195, 1195, 370, 1079, + /* 570 */ 1080, 1081, 787, 265, 5, 359, 494, 512, 469, 1079, + /* 580 */ 1080, 1081, 398, 397, 1079, 1079, 1080, 1081, 3, 282, + /* 590 */ 1079, 1083, 112, 113, 103, 1100, 1100, 953, 956, 946, + /* 600 */ 946, 110, 110, 111, 111, 111, 111, 252, 252, 1015, + /* 610 */ 220, 1079, 873, 458, 455, 454, 943, 943, 954, 957, + /* 620 */ 512, 252, 252, 453, 1016, 1079, 445, 1107, 1209, 1107, + /* 630 */ 1079, 1080, 1081, 515, 512, 426, 1079, 1080, 1081, 1017, + /* 640 */ 512, 109, 109, 109, 109, 108, 108, 107, 107, 107, + /* 650 */ 106, 401, 1052, 515, 50, 50, 515, 1079, 1080, 1081, + /* 660 */ 828, 370, 1051, 379, 411, 1064, 1358, 207, 408, 773, + /* 670 */ 829, 1079, 1080, 1081, 64, 64, 322, 64, 64, 1302, + /* 680 */ 947, 411, 410, 1358, 1360, 112, 113, 103, 1100, 1100, + /* 690 */ 953, 956, 946, 946, 110, 110, 111, 111, 111, 111, + /* 700 */ 294, 482, 515, 1037, 1487, 515, 434, 1487, 354, 1120, + /* 710 */ 483, 996, 913, 485, 466, 996, 132, 178, 33, 450, + /* 720 */ 1203, 136, 406, 64, 64, 479, 64, 64, 419, 369, + /* 730 */ 283, 1146, 252, 252, 109, 109, 109, 109, 108, 108, + /* 740 */ 107, 107, 107, 106, 401, 512, 224, 440, 411, 266, + /* 750 */ 1358, 266, 252, 252, 370, 296, 416, 284, 934, 396, + /* 760 */ 976, 470, 400, 252, 252, 512, 9, 473, 231, 500, + /* 770 */ 354, 1036, 1035, 1488, 355, 374, 512, 1121, 112, 113, + /* 780 */ 103, 1100, 1100, 953, 956, 946, 946, 110, 110, 111, + /* 790 */ 111, 111, 111, 252, 252, 1015, 515, 1347, 295, 252, + /* 800 */ 252, 252, 252, 1098, 375, 249, 512, 445, 872, 322, + /* 810 */ 1016, 480, 512, 195, 512, 434, 273, 15, 15, 515, + /* 820 */ 314, 515, 95, 515, 93, 1017, 367, 109, 109, 109, + /* 830 */ 109, 108, 108, 107, 107, 107, 106, 401, 515, 1121, + /* 840 */ 39, 39, 51, 51, 52, 52, 503, 370, 515, 1204, + /* 850 */ 1098, 918, 439, 341, 133, 436, 223, 222, 221, 53, + /* 860 */ 53, 322, 1400, 761, 762, 763, 515, 370, 88, 54, + /* 870 */ 54, 112, 113, 103, 1100, 1100, 953, 956, 946, 946, + /* 880 */ 110, 110, 111, 111, 111, 111, 407, 55, 55, 196, + /* 890 */ 515, 112, 113, 103, 1100, 1100, 953, 956, 946, 946, + /* 900 */ 110, 110, 111, 111, 111, 111, 135, 264, 1149, 376, + /* 910 */ 515, 40, 40, 515, 872, 515, 993, 515, 993, 116, + /* 920 */ 109, 109, 109, 109, 108, 108, 107, 107, 107, 106, + /* 930 */ 401, 41, 41, 515, 43, 43, 44, 44, 56, 56, + /* 940 */ 109, 109, 109, 109, 108, 108, 107, 107, 107, 106, + /* 950 */ 401, 515, 379, 515, 57, 57, 515, 799, 515, 379, + /* 960 */ 515, 445, 200, 515, 323, 515, 1397, 515, 1459, 515, + /* 970 */ 1287, 817, 58, 58, 14, 14, 515, 59, 59, 118, + /* 980 */ 118, 60, 60, 515, 46, 46, 61, 61, 62, 62, + /* 990 */ 47, 47, 515, 190, 189, 91, 515, 140, 140, 515, + /* 1000 */ 394, 515, 277, 1200, 141, 141, 515, 1115, 515, 992, + /* 1010 */ 515, 992, 515, 69, 69, 370, 278, 48, 48, 259, + /* 1020 */ 65, 65, 119, 119, 246, 246, 260, 66, 66, 120, + /* 1030 */ 120, 121, 121, 117, 117, 370, 515, 512, 383, 112, + /* 1040 */ 113, 103, 1100, 1100, 953, 956, 946, 946, 110, 110, + /* 1050 */ 111, 111, 111, 111, 515, 872, 515, 139, 139, 112, + /* 1060 */ 113, 103, 1100, 1100, 953, 956, 946, 946, 110, 110, + /* 1070 */ 111, 111, 111, 111, 1287, 138, 138, 125, 125, 515, + /* 1080 */ 12, 515, 281, 1287, 515, 445, 131, 1287, 109, 109, + /* 1090 */ 109, 109, 108, 108, 107, 107, 107, 106, 401, 515, + /* 1100 */ 124, 124, 122, 122, 515, 123, 123, 515, 109, 109, + /* 1110 */ 109, 109, 108, 108, 107, 107, 107, 106, 401, 515, + /* 1120 */ 68, 68, 463, 783, 515, 70, 70, 302, 67, 67, + /* 1130 */ 1032, 253, 253, 356, 1287, 191, 196, 1433, 465, 1301, + /* 1140 */ 38, 38, 384, 94, 512, 42, 42, 177, 848, 274, + /* 1150 */ 506, 385, 420, 847, 1356, 441, 508, 376, 377, 153, + /* 1160 */ 423, 872, 432, 370, 224, 251, 194, 887, 182, 293, + /* 1170 */ 783, 848, 88, 254, 466, 888, 847, 915, 807, 806, + /* 1180 */ 230, 1241, 910, 370, 17, 413, 797, 112, 113, 103, + /* 1190 */ 1100, 1100, 953, 956, 946, 946, 110, 110, 111, 111, + /* 1200 */ 111, 111, 395, 814, 815, 1175, 983, 112, 101, 103, + /* 1210 */ 1100, 1100, 953, 956, 946, 946, 110, 110, 111, 111, + /* 1220 */ 111, 111, 375, 422, 427, 429, 298, 230, 230, 88, + /* 1230 */ 1240, 451, 312, 797, 226, 88, 109, 109, 109, 109, + /* 1240 */ 108, 108, 107, 107, 107, 106, 401, 86, 433, 979, + /* 1250 */ 927, 881, 226, 983, 230, 415, 109, 109, 109, 109, + /* 1260 */ 108, 108, 107, 107, 107, 106, 401, 320, 845, 781, + /* 1270 */ 846, 100, 130, 100, 1403, 290, 370, 319, 1377, 1376, + /* 1280 */ 437, 1449, 299, 1237, 303, 306, 308, 310, 1188, 1174, + /* 1290 */ 1173, 1172, 315, 324, 325, 1228, 370, 927, 1249, 271, + /* 1300 */ 1286, 113, 103, 1100, 1100, 953, 956, 946, 946, 110, + /* 1310 */ 110, 111, 111, 111, 111, 1224, 1235, 502, 501, 1292, + /* 1320 */ 1221, 1155, 103, 1100, 1100, 953, 956, 946, 946, 110, + /* 1330 */ 110, 111, 111, 111, 111, 1148, 1137, 1136, 1138, 1443, + /* 1340 */ 446, 244, 184, 98, 507, 188, 4, 353, 327, 109, + /* 1350 */ 109, 109, 109, 108, 108, 107, 107, 107, 106, 401, + /* 1360 */ 510, 329, 331, 199, 414, 456, 292, 285, 318, 109, + /* 1370 */ 109, 109, 109, 108, 108, 107, 107, 107, 106, 401, + /* 1380 */ 11, 1271, 1279, 402, 361, 192, 1171, 1351, 431, 505, + /* 1390 */ 346, 1350, 333, 98, 507, 504, 4, 187, 1446, 1115, + /* 1400 */ 233, 1396, 155, 1394, 1112, 152, 72, 75, 378, 425, + /* 1410 */ 510, 165, 149, 157, 933, 1276, 86, 30, 1268, 417, + /* 1420 */ 96, 96, 8, 160, 161, 162, 163, 97, 418, 402, + /* 1430 */ 517, 516, 449, 402, 923, 210, 358, 424, 1282, 438, + /* 1440 */ 169, 214, 360, 1345, 80, 504, 31, 444, 1365, 301, + /* 1450 */ 245, 274, 506, 216, 174, 305, 488, 447, 217, 462, + /* 1460 */ 1139, 487, 218, 363, 933, 923, 923, 925, 926, 24, + /* 1470 */ 96, 96, 1191, 1190, 1189, 391, 1182, 97, 1163, 402, + /* 1480 */ 517, 516, 799, 364, 923, 1162, 317, 1161, 98, 507, + /* 1490 */ 1181, 4, 1458, 472, 393, 269, 270, 475, 481, 1232, + /* 1500 */ 85, 1233, 326, 328, 232, 510, 495, 1231, 330, 98, + /* 1510 */ 507, 1230, 4, 486, 335, 923, 923, 925, 926, 24, + /* 1520 */ 1435, 1068, 404, 181, 336, 256, 510, 115, 402, 332, + /* 1530 */ 352, 352, 351, 241, 349, 1214, 1414, 770, 338, 10, + /* 1540 */ 504, 340, 272, 92, 1331, 1213, 87, 183, 484, 402, + /* 1550 */ 201, 488, 280, 239, 344, 345, 489, 1145, 29, 933, + /* 1560 */ 279, 504, 1074, 518, 240, 96, 96, 242, 243, 519, + /* 1570 */ 1134, 1129, 97, 154, 402, 517, 516, 372, 373, 923, + /* 1580 */ 933, 142, 143, 128, 1381, 267, 96, 96, 852, 757, + /* 1590 */ 203, 144, 403, 97, 1382, 402, 517, 516, 204, 1380, + /* 1600 */ 923, 146, 1379, 1159, 1158, 71, 1156, 276, 202, 185, + /* 1610 */ 923, 923, 925, 926, 24, 198, 257, 126, 991, 989, + /* 1620 */ 907, 98, 507, 156, 4, 145, 158, 206, 831, 209, + /* 1630 */ 291, 923, 923, 925, 926, 24, 1005, 911, 510, 164, + /* 1640 */ 147, 380, 371, 382, 166, 76, 77, 274, 506, 148, + /* 1650 */ 78, 79, 1008, 211, 212, 1004, 137, 213, 18, 300, + /* 1660 */ 230, 402, 997, 1109, 443, 215, 32, 170, 171, 772, + /* 1670 */ 409, 448, 319, 504, 219, 172, 452, 81, 19, 457, + /* 1680 */ 313, 20, 82, 268, 488, 150, 810, 179, 83, 487, + /* 1690 */ 464, 151, 933, 180, 959, 84, 1040, 34, 96, 96, + /* 1700 */ 471, 1041, 35, 474, 193, 97, 248, 402, 517, 516, + /* 1710 */ 1068, 404, 923, 250, 256, 880, 229, 175, 875, 352, + /* 1720 */ 352, 351, 241, 349, 100, 21, 770, 22, 1054, 1056, + /* 1730 */ 7, 98, 507, 1045, 4, 337, 1058, 23, 974, 201, + /* 1740 */ 176, 280, 88, 923, 923, 925, 926, 24, 510, 279, + /* 1750 */ 960, 958, 962, 1014, 963, 1013, 235, 234, 25, 36, + /* 1760 */ 99, 90, 507, 928, 4, 511, 350, 782, 26, 841, + /* 1770 */ 236, 402, 347, 1069, 237, 1125, 1125, 1451, 510, 203, + /* 1780 */ 1450, 1125, 1125, 504, 1125, 1125, 1125, 204, 1125, 1125, + /* 1790 */ 146, 1125, 1125, 1125, 1125, 1125, 1125, 202, 1125, 1125, + /* 1800 */ 1125, 402, 933, 1125, 1125, 1125, 1125, 1125, 96, 96, + /* 1810 */ 1125, 1125, 1125, 504, 1125, 97, 1125, 402, 517, 516, + /* 1820 */ 1125, 1125, 923, 1125, 1125, 1125, 1125, 1125, 1125, 1125, + /* 1830 */ 1125, 371, 933, 1125, 1125, 1125, 274, 506, 96, 96, + /* 1840 */ 1125, 1125, 1125, 1125, 1125, 97, 1125, 402, 517, 516, + /* 1850 */ 1125, 1125, 923, 923, 923, 925, 926, 24, 1125, 409, + /* 1860 */ 1125, 1125, 1125, 256, 1125, 1125, 1125, 1125, 352, 352, + /* 1870 */ 351, 241, 349, 1125, 1125, 770, 1125, 1125, 1125, 1125, + /* 1880 */ 1125, 1125, 1125, 923, 923, 925, 926, 24, 201, 1125, + /* 1890 */ 280, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 279, 1125, + /* 1900 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, + /* 1910 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, + /* 1920 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 203, 1125, + /* 1930 */ 1125, 1125, 1125, 1125, 1125, 1125, 204, 1125, 1125, 146, + /* 1940 */ 1125, 1125, 1125, 1125, 1125, 1125, 202, 1125, 1125, 1125, + /* 1950 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, + /* 1960 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, + /* 1970 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, + /* 1980 */ 371, 1125, 1125, 1125, 1125, 274, 506, 1125, 1125, 1125, + /* 1990 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, + /* 2000 */ 1125, 1125, 1125, 1125, 1125, 1125, 1125, 1125, 409, }; static const YYCODETYPE yy_lookahead[] = { - /* 0 */ 19, 115, 19, 117, 118, 24, 1, 2, 27, 79, - /* 10 */ 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, - /* 20 */ 90, 91, 92, 93, 94, 144, 145, 146, 147, 58, - /* 30 */ 49, 50, 79, 80, 81, 82, 22, 84, 85, 86, - /* 40 */ 87, 88, 89, 90, 91, 92, 93, 94, 221, 222, - /* 50 */ 223, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 60 */ 79, 80, 81, 82, 94, 84, 85, 86, 87, 88, - /* 70 */ 89, 90, 91, 92, 93, 94, 19, 94, 97, 108, - /* 80 */ 109, 110, 99, 100, 101, 102, 103, 104, 105, 32, - /* 90 */ 119, 120, 78, 27, 152, 112, 93, 94, 41, 88, - /* 100 */ 89, 90, 91, 92, 93, 94, 49, 50, 84, 85, - /* 110 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 58, - /* 120 */ 157, 119, 120, 163, 68, 163, 65, 70, 71, 72, - /* 130 */ 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, - /* 140 */ 152, 84, 85, 86, 87, 88, 89, 90, 91, 92, - /* 150 */ 93, 94, 19, 97, 88, 89, 196, 101, 196, 26, - /* 160 */ 172, 173, 96, 97, 98, 210, 100, 22, 152, 108, - /* 170 */ 109, 110, 27, 107, 27, 109, 221, 222, 223, 219, - /* 180 */ 238, 219, 49, 50, 152, 169, 170, 54, 132, 133, - /* 190 */ 134, 228, 232, 171, 231, 207, 208, 237, 132, 237, - /* 200 */ 134, 179, 19, 70, 71, 72, 73, 74, 75, 76, - /* 210 */ 77, 78, 79, 80, 81, 82, 152, 84, 85, 86, - /* 220 */ 87, 88, 89, 90, 91, 92, 93, 94, 27, 65, - /* 230 */ 30, 152, 49, 50, 34, 52, 90, 91, 92, 93, - /* 240 */ 94, 96, 97, 98, 97, 22, 230, 27, 48, 217, - /* 250 */ 27, 172, 173, 70, 71, 72, 73, 74, 75, 76, - /* 260 */ 77, 78, 79, 80, 81, 82, 172, 84, 85, 86, - /* 270 */ 87, 88, 89, 90, 91, 92, 93, 94, 19, 148, - /* 280 */ 149, 152, 218, 24, 152, 154, 207, 156, 172, 152, - /* 290 */ 22, 68, 27, 152, 163, 27, 164, 96, 97, 98, - /* 300 */ 99, 172, 173, 102, 103, 104, 169, 170, 49, 50, - /* 310 */ 90, 88, 89, 152, 113, 186, 96, 97, 98, 96, - /* 320 */ 97, 160, 57, 27, 101, 164, 137, 196, 139, 70, - /* 330 */ 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, - /* 340 */ 81, 82, 11, 84, 85, 86, 87, 88, 89, 90, - /* 350 */ 91, 92, 93, 94, 19, 132, 133, 134, 23, 218, - /* 360 */ 152, 96, 97, 98, 96, 97, 98, 230, 99, 22, - /* 370 */ 152, 102, 103, 104, 27, 244, 152, 152, 27, 26, - /* 380 */ 152, 22, 113, 65, 49, 50, 27, 194, 195, 58, - /* 390 */ 172, 173, 96, 97, 98, 185, 65, 172, 173, 206, - /* 400 */ 172, 173, 190, 191, 186, 70, 71, 72, 73, 74, - /* 410 */ 75, 76, 77, 78, 79, 80, 81, 82, 175, 84, - /* 420 */ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, - /* 430 */ 19, 175, 207, 208, 23, 207, 208, 119, 120, 108, - /* 440 */ 109, 110, 27, 96, 97, 98, 116, 96, 97, 98, - /* 450 */ 152, 121, 152, 179, 180, 96, 97, 98, 250, 106, - /* 460 */ 49, 50, 188, 19, 221, 222, 223, 168, 169, 170, - /* 470 */ 172, 173, 172, 173, 250, 124, 172, 221, 222, 223, - /* 480 */ 26, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 490 */ 79, 80, 81, 82, 50, 84, 85, 86, 87, 88, - /* 500 */ 89, 90, 91, 92, 93, 94, 19, 207, 208, 12, - /* 510 */ 23, 96, 97, 98, 221, 222, 223, 194, 195, 152, - /* 520 */ 199, 23, 19, 225, 26, 28, 152, 152, 152, 206, - /* 530 */ 209, 164, 190, 191, 241, 152, 49, 50, 152, 124, - /* 540 */ 152, 44, 219, 46, 152, 21, 172, 173, 172, 173, - /* 550 */ 183, 107, 185, 16, 163, 58, 112, 70, 71, 72, - /* 560 */ 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, - /* 570 */ 152, 84, 85, 86, 87, 88, 89, 90, 91, 92, - /* 580 */ 93, 94, 19, 207, 130, 152, 23, 196, 64, 152, - /* 590 */ 172, 173, 22, 152, 24, 152, 98, 27, 61, 96, - /* 600 */ 63, 26, 211, 212, 186, 172, 173, 49, 50, 172, - /* 610 */ 173, 23, 49, 50, 26, 172, 173, 88, 89, 186, - /* 620 */ 24, 238, 124, 27, 238, 22, 23, 103, 187, 26, - /* 630 */ 152, 73, 74, 70, 71, 72, 73, 74, 75, 76, - /* 640 */ 77, 78, 79, 80, 81, 82, 152, 84, 85, 86, - /* 650 */ 87, 88, 89, 90, 91, 92, 93, 94, 19, 101, - /* 660 */ 152, 132, 23, 134, 140, 152, 12, 97, 36, 168, - /* 670 */ 169, 170, 69, 98, 152, 22, 23, 140, 50, 26, - /* 680 */ 172, 173, 28, 51, 152, 172, 173, 193, 49, 50, - /* 690 */ 22, 59, 24, 97, 172, 173, 152, 152, 44, 124, - /* 700 */ 46, 0, 1, 2, 172, 173, 22, 23, 19, 70, - /* 710 */ 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, - /* 720 */ 81, 82, 69, 84, 85, 86, 87, 88, 89, 90, - /* 730 */ 91, 92, 93, 94, 152, 107, 152, 193, 49, 50, - /* 740 */ 181, 22, 23, 111, 108, 109, 110, 7, 8, 9, - /* 750 */ 16, 247, 248, 69, 172, 173, 172, 173, 152, 70, - /* 760 */ 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, - /* 770 */ 81, 82, 152, 84, 85, 86, 87, 88, 89, 90, - /* 780 */ 91, 92, 93, 94, 19, 152, 242, 152, 69, 152, - /* 790 */ 166, 167, 172, 173, 32, 61, 152, 63, 152, 193, - /* 800 */ 152, 152, 152, 41, 152, 172, 173, 172, 173, 172, - /* 810 */ 173, 152, 152, 152, 49, 50, 172, 173, 172, 173, - /* 820 */ 172, 173, 172, 173, 172, 173, 132, 138, 134, 152, - /* 830 */ 152, 172, 173, 172, 173, 70, 71, 72, 73, 74, - /* 840 */ 75, 76, 77, 78, 79, 80, 81, 82, 152, 84, - /* 850 */ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, - /* 860 */ 19, 152, 22, 152, 195, 24, 152, 27, 172, 173, - /* 870 */ 193, 193, 152, 152, 152, 206, 152, 217, 152, 152, - /* 880 */ 152, 172, 173, 172, 173, 152, 172, 173, 152, 152, - /* 890 */ 49, 50, 172, 173, 172, 173, 172, 173, 172, 173, - /* 900 */ 172, 173, 152, 138, 152, 172, 173, 108, 109, 110, - /* 910 */ 19, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 920 */ 79, 80, 81, 82, 152, 84, 85, 86, 87, 88, - /* 930 */ 89, 90, 91, 92, 93, 94, 152, 97, 152, 152, - /* 940 */ 49, 50, 26, 193, 172, 173, 152, 152, 152, 146, - /* 950 */ 147, 132, 152, 134, 217, 181, 172, 173, 172, 173, - /* 960 */ 19, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 970 */ 79, 80, 81, 82, 152, 84, 85, 86, 87, 88, - /* 980 */ 89, 90, 91, 92, 93, 94, 152, 193, 152, 193, - /* 990 */ 49, 50, 181, 193, 172, 173, 166, 167, 245, 246, - /* 1000 */ 211, 212, 152, 22, 217, 152, 172, 173, 172, 173, - /* 1010 */ 19, 70, 71, 72, 73, 74, 75, 76, 77, 78, - /* 1020 */ 79, 80, 81, 82, 152, 84, 85, 86, 87, 88, - /* 1030 */ 89, 90, 91, 92, 93, 94, 152, 187, 152, 123, - /* 1040 */ 49, 50, 23, 23, 23, 26, 26, 26, 23, 23, - /* 1050 */ 23, 26, 26, 26, 7, 8, 172, 173, 172, 173, - /* 1060 */ 19, 90, 71, 72, 73, 74, 75, 76, 77, 78, - /* 1070 */ 79, 80, 81, 82, 152, 84, 85, 86, 87, 88, - /* 1080 */ 89, 90, 91, 92, 93, 94, 152, 116, 152, 217, - /* 1090 */ 49, 50, 121, 23, 172, 173, 26, 100, 101, 27, - /* 1100 */ 101, 27, 23, 122, 152, 26, 172, 173, 172, 173, - /* 1110 */ 152, 112, 163, 72, 73, 74, 75, 76, 77, 78, - /* 1120 */ 79, 80, 81, 82, 163, 84, 85, 86, 87, 88, - /* 1130 */ 89, 90, 91, 92, 93, 94, 19, 20, 152, 22, - /* 1140 */ 23, 152, 163, 65, 27, 196, 163, 19, 20, 23, - /* 1150 */ 22, 213, 26, 19, 37, 27, 152, 196, 172, 173, - /* 1160 */ 152, 172, 173, 27, 23, 37, 152, 26, 152, 97, - /* 1170 */ 152, 97, 210, 56, 163, 196, 163, 163, 100, 196, - /* 1180 */ 172, 173, 65, 152, 56, 68, 172, 173, 172, 173, - /* 1190 */ 172, 173, 152, 65, 163, 163, 68, 23, 152, 234, - /* 1200 */ 26, 152, 152, 172, 173, 88, 89, 196, 152, 196, - /* 1210 */ 196, 152, 95, 96, 97, 98, 88, 89, 101, 152, - /* 1220 */ 152, 207, 208, 95, 96, 97, 98, 196, 196, 101, - /* 1230 */ 96, 233, 152, 97, 152, 152, 19, 20, 207, 22, - /* 1240 */ 152, 152, 152, 191, 27, 152, 152, 152, 152, 132, - /* 1250 */ 133, 134, 135, 136, 37, 152, 152, 152, 152, 152, - /* 1260 */ 132, 133, 134, 135, 136, 210, 197, 210, 210, 198, - /* 1270 */ 150, 184, 239, 56, 201, 214, 214, 201, 239, 180, - /* 1280 */ 214, 227, 198, 38, 176, 68, 175, 175, 175, 122, - /* 1290 */ 155, 200, 159, 19, 20, 40, 22, 159, 159, 22, - /* 1300 */ 70, 27, 130, 243, 240, 88, 89, 90, 189, 18, - /* 1310 */ 201, 37, 95, 96, 97, 98, 192, 5, 101, 192, - /* 1320 */ 220, 240, 10, 11, 12, 13, 14, 159, 18, 17, - /* 1330 */ 56, 158, 192, 201, 192, 220, 189, 189, 201, 159, - /* 1340 */ 158, 137, 68, 31, 45, 33, 236, 159, 159, 132, - /* 1350 */ 133, 134, 135, 136, 42, 158, 235, 22, 177, 159, - /* 1360 */ 158, 158, 88, 89, 159, 107, 174, 55, 177, 95, - /* 1370 */ 96, 97, 98, 174, 62, 101, 47, 65, 66, 106, - /* 1380 */ 174, 125, 19, 20, 174, 22, 177, 176, 174, 182, - /* 1390 */ 27, 216, 174, 174, 182, 107, 159, 22, 215, 215, - /* 1400 */ 37, 216, 216, 216, 137, 215, 132, 133, 134, 135, - /* 1410 */ 136, 215, 159, 177, 94, 177, 129, 224, 205, 56, - /* 1420 */ 226, 126, 128, 203, 229, 204, 114, 229, 127, 202, - /* 1430 */ 201, 68, 25, 162, 26, 13, 161, 153, 153, 6, - /* 1440 */ 151, 151, 178, 151, 165, 165, 178, 165, 4, 3, - /* 1450 */ 249, 88, 89, 141, 22, 142, 15, 249, 95, 96, - /* 1460 */ 97, 98, 246, 67, 101, 16, 23, 120, 23, 131, - /* 1470 */ 111, 123, 20, 16, 125, 1, 123, 131, 78, 78, - /* 1480 */ 78, 78, 111, 96, 122, 35, 1, 5, 22, 107, - /* 1490 */ 140, 53, 53, 26, 60, 132, 133, 134, 135, 136, - /* 1500 */ 107, 43, 24, 20, 112, 19, 22, 52, 52, 105, - /* 1510 */ 22, 22, 52, 23, 22, 22, 29, 23, 39, 23, - /* 1520 */ 23, 26, 116, 22, 26, 23, 22, 122, 23, 23, - /* 1530 */ 22, 96, 11, 124, 35, 26, 26, 23, 35, 23, - /* 1540 */ 23, 23, 35, 23, 22, 26, 23, 22, 24, 122, - /* 1550 */ 23, 22, 26, 22, 24, 23, 23, 23, 22, 122, - /* 1560 */ 23, 15, 122, 1, 122, + /* 0 */ 184, 238, 239, 240, 238, 239, 240, 163, 155, 156, + /* 10 */ 157, 158, 159, 160, 163, 191, 192, 183, 165, 19, + /* 20 */ 167, 258, 202, 203, 200, 191, 163, 174, 184, 185, + /* 30 */ 174, 31, 163, 163, 171, 184, 185, 35, 175, 39, + /* 40 */ 179, 180, 181, 43, 44, 45, 46, 47, 48, 49, + /* 50 */ 50, 51, 52, 53, 54, 55, 56, 57, 184, 206, + /* 60 */ 207, 163, 206, 207, 220, 163, 16, 163, 66, 163, + /* 70 */ 59, 270, 219, 229, 273, 219, 74, 208, 174, 223, + /* 80 */ 224, 163, 184, 185, 163, 232, 184, 185, 184, 185, + /* 90 */ 184, 185, 92, 93, 94, 95, 96, 97, 98, 99, + /* 100 */ 100, 101, 102, 233, 198, 184, 185, 96, 97, 163, + /* 110 */ 206, 207, 19, 163, 261, 104, 105, 106, 107, 198, + /* 120 */ 109, 119, 220, 219, 220, 274, 275, 77, 117, 79, + /* 130 */ 187, 229, 19, 229, 184, 185, 43, 44, 45, 46, + /* 140 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, + /* 150 */ 57, 233, 141, 134, 143, 102, 43, 44, 45, 46, + /* 160 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, + /* 170 */ 57, 152, 274, 216, 276, 218, 83, 163, 85, 233, + /* 180 */ 67, 238, 239, 240, 11, 92, 93, 94, 95, 96, + /* 190 */ 97, 98, 99, 100, 101, 102, 19, 54, 55, 56, + /* 200 */ 57, 58, 163, 26, 163, 92, 93, 94, 95, 96, + /* 210 */ 97, 98, 99, 100, 101, 102, 54, 55, 56, 57, + /* 220 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, + /* 230 */ 53, 54, 55, 56, 57, 92, 93, 94, 95, 96, + /* 240 */ 97, 98, 99, 100, 101, 102, 69, 96, 97, 98, + /* 250 */ 99, 100, 101, 102, 92, 93, 94, 95, 96, 97, + /* 260 */ 98, 99, 100, 101, 102, 81, 179, 180, 181, 92, + /* 270 */ 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, + /* 280 */ 163, 267, 268, 163, 22, 23, 59, 163, 26, 19, + /* 290 */ 117, 118, 175, 109, 24, 59, 92, 93, 94, 95, + /* 300 */ 96, 97, 98, 99, 100, 101, 102, 268, 184, 185, + /* 310 */ 269, 127, 128, 43, 44, 45, 46, 47, 48, 49, + /* 320 */ 50, 51, 52, 53, 54, 55, 56, 57, 157, 158, + /* 330 */ 159, 160, 105, 106, 107, 163, 165, 59, 167, 184, + /* 340 */ 90, 105, 106, 107, 108, 174, 73, 111, 112, 113, + /* 350 */ 19, 22, 163, 91, 81, 163, 106, 121, 81, 132, + /* 360 */ 110, 16, 92, 93, 94, 95, 96, 97, 98, 99, + /* 370 */ 100, 101, 102, 184, 185, 255, 98, 206, 207, 26, + /* 380 */ 101, 102, 19, 105, 106, 107, 23, 198, 59, 116, + /* 390 */ 219, 141, 142, 143, 24, 163, 187, 205, 274, 275, + /* 400 */ 127, 128, 182, 232, 127, 128, 43, 44, 45, 46, + /* 410 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, + /* 420 */ 57, 158, 77, 160, 79, 59, 26, 182, 165, 59, + /* 430 */ 167, 199, 261, 102, 105, 106, 107, 174, 72, 108, + /* 440 */ 109, 110, 111, 112, 113, 114, 59, 238, 239, 240, + /* 450 */ 123, 120, 125, 126, 163, 92, 93, 94, 95, 96, + /* 460 */ 97, 98, 99, 100, 101, 102, 163, 163, 163, 206, + /* 470 */ 207, 105, 106, 107, 254, 19, 106, 90, 197, 23, + /* 480 */ 127, 128, 219, 238, 239, 240, 22, 184, 185, 184, + /* 490 */ 185, 22, 105, 106, 149, 232, 205, 110, 163, 43, + /* 500 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, + /* 510 */ 54, 55, 56, 57, 98, 99, 100, 101, 102, 184, + /* 520 */ 185, 163, 53, 59, 261, 220, 117, 118, 141, 142, + /* 530 */ 143, 131, 174, 59, 229, 116, 117, 118, 163, 59, + /* 540 */ 163, 163, 184, 185, 59, 242, 72, 22, 92, 93, + /* 550 */ 94, 95, 96, 97, 98, 99, 100, 101, 102, 184, + /* 560 */ 185, 24, 184, 185, 206, 207, 202, 203, 19, 105, + /* 570 */ 106, 107, 23, 198, 22, 174, 198, 219, 220, 105, + /* 580 */ 106, 107, 96, 97, 59, 105, 106, 107, 22, 174, + /* 590 */ 59, 106, 43, 44, 45, 46, 47, 48, 49, 50, + /* 600 */ 51, 52, 53, 54, 55, 56, 57, 206, 207, 12, + /* 610 */ 108, 59, 132, 111, 112, 113, 46, 47, 48, 49, + /* 620 */ 219, 206, 207, 121, 27, 59, 163, 141, 207, 143, + /* 630 */ 105, 106, 107, 163, 219, 234, 105, 106, 107, 42, + /* 640 */ 219, 92, 93, 94, 95, 96, 97, 98, 99, 100, + /* 650 */ 101, 102, 76, 163, 184, 185, 163, 105, 106, 107, + /* 660 */ 63, 19, 86, 163, 163, 23, 163, 130, 205, 21, + /* 670 */ 73, 105, 106, 107, 184, 185, 163, 184, 185, 237, + /* 680 */ 110, 180, 181, 180, 181, 43, 44, 45, 46, 47, + /* 690 */ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, + /* 700 */ 174, 163, 163, 22, 23, 163, 163, 26, 22, 23, + /* 710 */ 220, 29, 73, 220, 272, 33, 22, 163, 24, 19, + /* 720 */ 174, 208, 259, 184, 185, 19, 184, 185, 80, 175, + /* 730 */ 230, 174, 206, 207, 92, 93, 94, 95, 96, 97, + /* 740 */ 98, 99, 100, 101, 102, 219, 46, 65, 247, 195, + /* 750 */ 247, 197, 206, 207, 19, 116, 117, 118, 23, 220, + /* 760 */ 112, 174, 220, 206, 207, 219, 22, 174, 24, 174, + /* 770 */ 22, 23, 91, 264, 265, 168, 219, 91, 43, 44, + /* 780 */ 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, + /* 790 */ 55, 56, 57, 206, 207, 12, 163, 149, 255, 206, + /* 800 */ 207, 206, 207, 59, 104, 23, 219, 163, 26, 163, + /* 810 */ 27, 105, 219, 163, 219, 163, 211, 184, 185, 163, + /* 820 */ 120, 163, 146, 163, 148, 42, 221, 92, 93, 94, + /* 830 */ 95, 96, 97, 98, 99, 100, 101, 102, 163, 91, + /* 840 */ 184, 185, 184, 185, 184, 185, 63, 19, 163, 205, + /* 850 */ 106, 23, 245, 163, 208, 248, 116, 117, 118, 184, + /* 860 */ 185, 163, 163, 7, 8, 9, 163, 19, 26, 184, + /* 870 */ 185, 43, 44, 45, 46, 47, 48, 49, 50, 51, + /* 880 */ 52, 53, 54, 55, 56, 57, 163, 184, 185, 107, + /* 890 */ 163, 43, 44, 45, 46, 47, 48, 49, 50, 51, + /* 900 */ 52, 53, 54, 55, 56, 57, 208, 255, 177, 178, + /* 910 */ 163, 184, 185, 163, 132, 163, 141, 163, 143, 22, + /* 920 */ 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, + /* 930 */ 102, 184, 185, 163, 184, 185, 184, 185, 184, 185, + /* 940 */ 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, + /* 950 */ 102, 163, 163, 163, 184, 185, 163, 115, 163, 163, + /* 960 */ 163, 163, 15, 163, 163, 163, 163, 163, 23, 163, + /* 970 */ 163, 26, 184, 185, 184, 185, 163, 184, 185, 184, + /* 980 */ 185, 184, 185, 163, 184, 185, 184, 185, 184, 185, + /* 990 */ 184, 185, 163, 96, 97, 147, 163, 184, 185, 163, + /* 1000 */ 199, 163, 163, 205, 184, 185, 163, 60, 163, 141, + /* 1010 */ 163, 143, 163, 184, 185, 19, 163, 184, 185, 230, + /* 1020 */ 184, 185, 184, 185, 206, 207, 230, 184, 185, 184, + /* 1030 */ 185, 184, 185, 184, 185, 19, 163, 219, 231, 43, + /* 1040 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, + /* 1050 */ 54, 55, 56, 57, 163, 26, 163, 184, 185, 43, + /* 1060 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, + /* 1070 */ 54, 55, 56, 57, 163, 184, 185, 184, 185, 163, + /* 1080 */ 182, 163, 163, 163, 163, 163, 22, 163, 92, 93, + /* 1090 */ 94, 95, 96, 97, 98, 99, 100, 101, 102, 163, + /* 1100 */ 184, 185, 184, 185, 163, 184, 185, 163, 92, 93, + /* 1110 */ 94, 95, 96, 97, 98, 99, 100, 101, 102, 163, + /* 1120 */ 184, 185, 98, 59, 163, 184, 185, 205, 184, 185, + /* 1130 */ 23, 206, 207, 26, 163, 26, 107, 153, 154, 237, + /* 1140 */ 184, 185, 231, 147, 219, 184, 185, 249, 124, 127, + /* 1150 */ 128, 231, 254, 129, 163, 231, 177, 178, 262, 263, + /* 1160 */ 118, 132, 19, 19, 46, 223, 224, 31, 24, 23, + /* 1170 */ 106, 124, 26, 22, 272, 39, 129, 23, 109, 110, + /* 1180 */ 26, 163, 140, 19, 22, 234, 59, 43, 44, 45, + /* 1190 */ 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, + /* 1200 */ 56, 57, 231, 7, 8, 193, 59, 43, 44, 45, + /* 1210 */ 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, + /* 1220 */ 56, 57, 104, 61, 23, 23, 23, 26, 26, 26, + /* 1230 */ 163, 23, 23, 106, 26, 26, 92, 93, 94, 95, + /* 1240 */ 96, 97, 98, 99, 100, 101, 102, 138, 105, 23, + /* 1250 */ 59, 23, 26, 106, 26, 163, 92, 93, 94, 95, + /* 1260 */ 96, 97, 98, 99, 100, 101, 102, 110, 23, 23, + /* 1270 */ 23, 26, 26, 26, 163, 163, 19, 120, 163, 163, + /* 1280 */ 163, 130, 163, 163, 163, 163, 163, 163, 163, 193, + /* 1290 */ 193, 163, 163, 163, 163, 225, 19, 106, 163, 222, + /* 1300 */ 163, 44, 45, 46, 47, 48, 49, 50, 51, 52, + /* 1310 */ 53, 54, 55, 56, 57, 163, 163, 203, 163, 163, + /* 1320 */ 222, 163, 45, 46, 47, 48, 49, 50, 51, 52, + /* 1330 */ 53, 54, 55, 56, 57, 163, 163, 163, 163, 163, + /* 1340 */ 251, 250, 209, 19, 20, 182, 22, 161, 222, 92, + /* 1350 */ 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, + /* 1360 */ 36, 222, 222, 260, 226, 188, 256, 226, 187, 92, + /* 1370 */ 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, + /* 1380 */ 210, 213, 213, 59, 213, 196, 192, 187, 256, 244, + /* 1390 */ 212, 187, 226, 19, 20, 71, 22, 210, 166, 60, + /* 1400 */ 130, 170, 260, 170, 38, 81, 257, 257, 170, 104, + /* 1410 */ 36, 22, 43, 201, 90, 236, 138, 235, 213, 18, + /* 1420 */ 96, 97, 48, 204, 204, 204, 204, 103, 170, 105, + /* 1430 */ 106, 107, 18, 59, 110, 169, 213, 213, 201, 170, + /* 1440 */ 201, 169, 236, 213, 146, 71, 235, 62, 253, 252, + /* 1450 */ 170, 127, 128, 169, 22, 170, 82, 189, 169, 104, + /* 1460 */ 170, 87, 169, 189, 90, 141, 142, 143, 144, 145, + /* 1470 */ 96, 97, 186, 186, 186, 64, 194, 103, 186, 105, + /* 1480 */ 106, 107, 115, 189, 110, 188, 186, 186, 19, 20, + /* 1490 */ 194, 22, 186, 189, 102, 246, 246, 189, 133, 228, + /* 1500 */ 104, 228, 227, 227, 170, 36, 134, 228, 227, 19, + /* 1510 */ 20, 228, 22, 84, 271, 141, 142, 143, 144, 145, + /* 1520 */ 0, 1, 2, 216, 22, 5, 36, 137, 59, 227, + /* 1530 */ 10, 11, 12, 13, 14, 217, 269, 17, 216, 22, + /* 1540 */ 71, 170, 243, 146, 241, 217, 136, 215, 135, 59, + /* 1550 */ 30, 82, 32, 25, 214, 213, 87, 173, 26, 90, + /* 1560 */ 40, 71, 13, 172, 164, 96, 97, 164, 6, 162, + /* 1570 */ 162, 162, 103, 263, 105, 106, 107, 266, 266, 110, + /* 1580 */ 90, 176, 176, 190, 182, 190, 96, 97, 98, 4, + /* 1590 */ 70, 176, 3, 103, 182, 105, 106, 107, 78, 182, + /* 1600 */ 110, 81, 182, 182, 182, 182, 182, 151, 88, 22, + /* 1610 */ 141, 142, 143, 144, 145, 15, 89, 16, 23, 23, + /* 1620 */ 128, 19, 20, 139, 22, 119, 131, 24, 20, 133, + /* 1630 */ 16, 141, 142, 143, 144, 145, 1, 140, 36, 131, + /* 1640 */ 119, 61, 122, 37, 139, 53, 53, 127, 128, 119, + /* 1650 */ 53, 53, 105, 34, 130, 1, 5, 104, 22, 149, + /* 1660 */ 26, 59, 68, 75, 41, 130, 24, 68, 104, 20, + /* 1670 */ 150, 19, 120, 71, 114, 22, 67, 22, 22, 67, + /* 1680 */ 23, 22, 22, 67, 82, 37, 28, 23, 138, 87, + /* 1690 */ 22, 153, 90, 23, 23, 26, 23, 22, 96, 97, + /* 1700 */ 24, 23, 22, 24, 130, 103, 23, 105, 106, 107, + /* 1710 */ 1, 2, 110, 23, 5, 105, 34, 22, 132, 10, + /* 1720 */ 11, 12, 13, 14, 26, 34, 17, 34, 85, 83, + /* 1730 */ 44, 19, 20, 23, 22, 24, 75, 34, 23, 30, + /* 1740 */ 26, 32, 26, 141, 142, 143, 144, 145, 36, 40, + /* 1750 */ 23, 23, 23, 23, 11, 23, 22, 26, 22, 22, + /* 1760 */ 22, 19, 20, 23, 22, 26, 15, 23, 22, 124, + /* 1770 */ 130, 59, 23, 1, 130, 277, 277, 130, 36, 70, + /* 1780 */ 130, 277, 277, 71, 277, 277, 277, 78, 277, 277, + /* 1790 */ 81, 277, 277, 277, 277, 277, 277, 88, 277, 277, + /* 1800 */ 277, 59, 90, 277, 277, 277, 277, 277, 96, 97, + /* 1810 */ 277, 277, 277, 71, 277, 103, 277, 105, 106, 107, + /* 1820 */ 277, 277, 110, 277, 277, 277, 277, 277, 277, 277, + /* 1830 */ 277, 122, 90, 277, 277, 277, 127, 128, 96, 97, + /* 1840 */ 277, 277, 277, 277, 277, 103, 277, 105, 106, 107, + /* 1850 */ 277, 277, 110, 141, 142, 143, 144, 145, 277, 150, + /* 1860 */ 277, 277, 277, 5, 277, 277, 277, 277, 10, 11, + /* 1870 */ 12, 13, 14, 277, 277, 17, 277, 277, 277, 277, + /* 1880 */ 277, 277, 277, 141, 142, 143, 144, 145, 30, 277, + /* 1890 */ 32, 277, 277, 277, 277, 277, 277, 277, 40, 277, + /* 1900 */ 277, 277, 277, 277, 277, 277, 277, 277, 277, 277, + /* 1910 */ 277, 277, 277, 277, 277, 277, 277, 277, 277, 277, + /* 1920 */ 277, 277, 277, 277, 277, 277, 277, 277, 70, 277, + /* 1930 */ 277, 277, 277, 277, 277, 277, 78, 277, 277, 81, + /* 1940 */ 277, 277, 277, 277, 277, 277, 88, 277, 277, 277, + /* 1950 */ 277, 277, 277, 277, 277, 277, 277, 277, 277, 277, + /* 1960 */ 277, 277, 277, 277, 277, 277, 277, 277, 277, 277, + /* 1970 */ 277, 277, 277, 277, 277, 277, 277, 277, 277, 277, + /* 1980 */ 122, 277, 277, 277, 277, 127, 128, 277, 277, 277, + /* 1990 */ 277, 277, 277, 277, 277, 277, 277, 277, 277, 277, + /* 2000 */ 277, 277, 277, 277, 277, 277, 277, 277, 150, 277, + /* 2010 */ 277, 277, 277, 277, 277, 277, 277, 277, 277, }; -#define YY_SHIFT_USE_DFLT (1565) -#define YY_SHIFT_COUNT (454) -#define YY_SHIFT_MIN (-114) -#define YY_SHIFT_MAX (1562) -static const short yy_shift_ofst[] = { - /* 0 */ 5, 1117, 1312, 1128, 1274, 1274, 1274, 1274, 61, -19, - /* 10 */ 57, 57, 183, 1274, 1274, 1274, 1274, 1274, 1274, 1274, - /* 20 */ 66, 66, 201, -29, 331, 318, 133, 259, 335, 411, - /* 30 */ 487, 563, 639, 689, 765, 841, 891, 891, 891, 891, - /* 40 */ 891, 891, 891, 891, 891, 891, 891, 891, 891, 891, - /* 50 */ 891, 891, 891, 941, 891, 991, 1041, 1041, 1217, 1274, - /* 60 */ 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, - /* 70 */ 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, - /* 80 */ 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, - /* 90 */ 1363, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, 1274, - /* 100 */ 1274, 1274, 1274, 1274, -70, -47, -47, -47, -47, -47, - /* 110 */ 24, 11, 146, 296, 524, 444, 529, 529, 296, 3, - /* 120 */ 2, -30, 1565, 1565, 1565, -17, -17, -17, 145, 145, - /* 130 */ 497, 497, 265, 603, 653, 296, 296, 296, 296, 296, - /* 140 */ 296, 296, 296, 296, 296, 296, 296, 296, 296, 296, - /* 150 */ 296, 296, 296, 296, 296, 701, 1078, 147, 147, 2, - /* 160 */ 164, 164, 164, 164, 164, 164, 1565, 1565, 1565, 223, - /* 170 */ 56, 56, 268, 269, 220, 347, 351, 415, 359, 296, - /* 180 */ 296, 296, 296, 296, 296, 296, 296, 296, 296, 296, - /* 190 */ 296, 296, 296, 296, 296, 632, 632, 632, 296, 296, - /* 200 */ 498, 296, 296, 296, 570, 296, 296, 654, 296, 296, - /* 210 */ 296, 296, 296, 296, 296, 296, 296, 296, 636, 200, - /* 220 */ 596, 596, 596, 575, -114, 971, 740, 454, 503, 503, - /* 230 */ 1134, 454, 1134, 353, 588, 628, 762, 503, 189, 762, - /* 240 */ 762, 916, 330, 668, 1245, 1167, 1167, 1255, 1255, 1167, - /* 250 */ 1277, 1230, 1172, 1291, 1291, 1291, 1291, 1167, 1310, 1172, - /* 260 */ 1277, 1230, 1230, 1172, 1167, 1310, 1204, 1299, 1167, 1167, - /* 270 */ 1310, 1335, 1167, 1310, 1167, 1310, 1335, 1258, 1258, 1258, - /* 280 */ 1329, 1335, 1258, 1273, 1258, 1329, 1258, 1258, 1256, 1288, - /* 290 */ 1256, 1288, 1256, 1288, 1256, 1288, 1167, 1375, 1167, 1267, - /* 300 */ 1335, 1320, 1320, 1335, 1287, 1295, 1294, 1301, 1172, 1407, - /* 310 */ 1408, 1422, 1422, 1433, 1433, 1433, 1565, 1565, 1565, 1565, - /* 320 */ 1565, 1565, 1565, 1565, 558, 537, 684, 719, 734, 799, - /* 330 */ 840, 1019, 14, 1020, 1021, 1025, 1026, 1027, 1070, 1072, - /* 340 */ 997, 1047, 999, 1079, 1126, 1074, 1141, 694, 819, 1174, - /* 350 */ 1136, 981, 1444, 1446, 1432, 1313, 1441, 1396, 1449, 1443, - /* 360 */ 1445, 1347, 1338, 1359, 1348, 1452, 1349, 1457, 1474, 1353, - /* 370 */ 1346, 1400, 1401, 1402, 1403, 1371, 1387, 1450, 1362, 1485, - /* 380 */ 1482, 1466, 1382, 1350, 1438, 1467, 1439, 1434, 1458, 1393, - /* 390 */ 1478, 1483, 1486, 1392, 1404, 1484, 1455, 1488, 1489, 1490, - /* 400 */ 1492, 1456, 1487, 1493, 1460, 1479, 1494, 1496, 1497, 1495, - /* 410 */ 1406, 1501, 1502, 1504, 1498, 1405, 1505, 1506, 1435, 1499, - /* 420 */ 1508, 1409, 1509, 1503, 1510, 1507, 1514, 1509, 1516, 1517, - /* 430 */ 1518, 1519, 1520, 1522, 1521, 1523, 1525, 1524, 1526, 1527, - /* 440 */ 1529, 1530, 1526, 1532, 1531, 1533, 1534, 1536, 1427, 1437, - /* 450 */ 1440, 1442, 1537, 1546, 1562, +#define YY_SHIFT_COUNT (520) +#define YY_SHIFT_MIN (0) +#define YY_SHIFT_MAX (1858) +static const unsigned short int yy_shift_ofst[] = { + /* 0 */ 1709, 1520, 1858, 1324, 1324, 277, 1374, 1469, 1602, 1712, + /* 10 */ 1712, 1712, 273, 0, 0, 113, 1016, 1712, 1712, 1712, + /* 20 */ 1712, 1712, 1712, 1712, 1712, 1712, 1712, 11, 11, 236, + /* 30 */ 184, 277, 277, 277, 277, 277, 277, 93, 177, 270, + /* 40 */ 363, 456, 549, 642, 735, 828, 848, 996, 1144, 1016, + /* 50 */ 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, 1016, + /* 60 */ 1016, 1016, 1016, 1016, 1016, 1016, 1164, 1016, 1257, 1277, + /* 70 */ 1277, 1490, 1712, 1712, 1712, 1712, 1712, 1712, 1712, 1712, + /* 80 */ 1712, 1712, 1712, 1712, 1712, 1712, 1712, 1712, 1712, 1712, + /* 90 */ 1712, 1712, 1712, 1712, 1712, 1712, 1712, 1712, 1712, 1712, + /* 100 */ 1712, 1712, 1712, 1742, 1712, 1712, 1712, 1712, 1712, 1712, + /* 110 */ 1712, 1712, 1712, 1712, 1712, 1712, 1712, 143, 162, 162, + /* 120 */ 162, 162, 162, 204, 151, 416, 531, 648, 700, 531, + /* 130 */ 486, 486, 531, 353, 353, 353, 353, 409, 279, 53, + /* 140 */ 2009, 2009, 331, 331, 331, 329, 366, 329, 329, 597, + /* 150 */ 597, 464, 474, 262, 681, 531, 531, 531, 531, 531, + /* 160 */ 531, 531, 531, 531, 531, 531, 531, 531, 531, 531, + /* 170 */ 531, 531, 531, 531, 531, 531, 531, 173, 485, 984, + /* 180 */ 984, 576, 485, 19, 1022, 2009, 2009, 2009, 387, 250, + /* 190 */ 250, 525, 502, 278, 552, 227, 480, 566, 531, 531, + /* 200 */ 531, 531, 531, 531, 531, 531, 531, 531, 639, 531, + /* 210 */ 531, 531, 531, 531, 531, 531, 531, 531, 531, 531, + /* 220 */ 531, 2, 2, 2, 531, 531, 531, 531, 782, 531, + /* 230 */ 531, 531, 744, 531, 531, 783, 531, 531, 531, 531, + /* 240 */ 531, 531, 531, 531, 419, 682, 327, 370, 370, 370, + /* 250 */ 370, 1029, 327, 327, 1024, 897, 856, 947, 1109, 706, + /* 260 */ 706, 1143, 1109, 1109, 1143, 842, 945, 1118, 1136, 1136, + /* 270 */ 1136, 706, 676, 400, 1047, 694, 1339, 1270, 1270, 1366, + /* 280 */ 1366, 1270, 1305, 1389, 1369, 1278, 1401, 1401, 1401, 1401, + /* 290 */ 1270, 1414, 1278, 1278, 1305, 1389, 1369, 1369, 1278, 1270, + /* 300 */ 1414, 1298, 1385, 1270, 1414, 1432, 1270, 1414, 1270, 1414, + /* 310 */ 1432, 1355, 1355, 1355, 1411, 1432, 1355, 1367, 1355, 1411, + /* 320 */ 1355, 1355, 1432, 1392, 1392, 1432, 1365, 1396, 1365, 1396, + /* 330 */ 1365, 1396, 1365, 1396, 1270, 1372, 1429, 1502, 1390, 1372, + /* 340 */ 1517, 1270, 1397, 1390, 1410, 1413, 1278, 1528, 1532, 1549, + /* 350 */ 1549, 1562, 1562, 1562, 2009, 2009, 2009, 2009, 2009, 2009, + /* 360 */ 2009, 2009, 2009, 2009, 2009, 2009, 2009, 2009, 2009, 2009, + /* 370 */ 570, 345, 686, 748, 50, 740, 1064, 1107, 469, 537, + /* 380 */ 1042, 1146, 1162, 1154, 1201, 1202, 1203, 1208, 1209, 1127, + /* 390 */ 1069, 1196, 1157, 1147, 1226, 1228, 1245, 775, 868, 1246, + /* 400 */ 1247, 1191, 1151, 1585, 1589, 1587, 1456, 1600, 1527, 1601, + /* 410 */ 1595, 1596, 1492, 1484, 1506, 1603, 1495, 1608, 1496, 1614, + /* 420 */ 1635, 1508, 1497, 1521, 1580, 1606, 1505, 1592, 1593, 1597, + /* 430 */ 1598, 1530, 1547, 1619, 1524, 1654, 1651, 1636, 1553, 1510, + /* 440 */ 1594, 1634, 1599, 1588, 1623, 1535, 1564, 1642, 1649, 1652, + /* 450 */ 1552, 1560, 1653, 1609, 1655, 1656, 1657, 1659, 1612, 1658, + /* 460 */ 1660, 1616, 1648, 1664, 1550, 1668, 1538, 1670, 1671, 1669, + /* 470 */ 1673, 1675, 1676, 1678, 1680, 1679, 1574, 1683, 1690, 1610, + /* 480 */ 1682, 1695, 1586, 1698, 1691, 1698, 1693, 1643, 1661, 1646, + /* 490 */ 1686, 1710, 1711, 1714, 1716, 1703, 1715, 1698, 1727, 1728, + /* 500 */ 1729, 1730, 1731, 1732, 1734, 1743, 1736, 1737, 1740, 1744, + /* 510 */ 1738, 1746, 1739, 1645, 1640, 1644, 1647, 1650, 1749, 1751, + /* 520 */ 1772, }; -#define YY_REDUCE_USE_DFLT (-174) -#define YY_REDUCE_COUNT (323) -#define YY_REDUCE_MIN (-173) -#define YY_REDUCE_MAX (1292) +#define YY_REDUCE_COUNT (369) +#define YY_REDUCE_MIN (-237) +#define YY_REDUCE_MAX (1424) static const short yy_reduce_ofst[] = { - /* 0 */ -119, 1014, 131, 1031, -12, 225, 228, 300, -40, -45, - /* 10 */ 243, 256, 293, 129, 218, 418, 79, 376, 433, 298, - /* 20 */ 16, 137, 367, 323, -38, 391, -173, -173, -173, -173, - /* 30 */ -173, -173, -173, -173, -173, -173, -173, -173, -173, -173, - /* 40 */ -173, -173, -173, -173, -173, -173, -173, -173, -173, -173, - /* 50 */ -173, -173, -173, -173, -173, -173, -173, -173, 374, 437, - /* 60 */ 443, 508, 513, 522, 532, 582, 584, 620, 633, 635, - /* 70 */ 637, 644, 646, 648, 650, 652, 659, 661, 696, 709, - /* 80 */ 711, 714, 720, 722, 724, 726, 728, 733, 772, 784, - /* 90 */ 786, 822, 834, 836, 884, 886, 922, 934, 936, 986, - /* 100 */ 989, 1008, 1016, 1018, -173, -173, -173, -173, -173, -173, - /* 110 */ -173, -173, -173, 544, -37, 274, 299, 501, 161, -173, - /* 120 */ 193, -173, -173, -173, -173, 22, 22, 22, 64, 141, - /* 130 */ 212, 342, 208, 504, 504, 132, 494, 606, 677, 678, - /* 140 */ 750, 794, 796, -58, 32, 383, 660, 737, 386, 787, - /* 150 */ 800, 441, 872, 224, 850, 803, 949, 624, 830, 669, - /* 160 */ 961, 979, 983, 1011, 1013, 1032, 753, 789, 321, 94, - /* 170 */ 116, 304, 375, 210, 388, 392, 478, 545, 649, 721, - /* 180 */ 727, 736, 752, 795, 853, 952, 958, 1004, 1040, 1046, - /* 190 */ 1049, 1050, 1056, 1059, 1067, 559, 774, 811, 1068, 1080, - /* 200 */ 938, 1082, 1083, 1088, 962, 1089, 1090, 1052, 1093, 1094, - /* 210 */ 1095, 388, 1096, 1103, 1104, 1105, 1106, 1107, 965, 998, - /* 220 */ 1055, 1057, 1058, 938, 1069, 1071, 1120, 1073, 1061, 1062, - /* 230 */ 1033, 1076, 1039, 1108, 1087, 1099, 1111, 1066, 1054, 1112, - /* 240 */ 1113, 1091, 1084, 1135, 1060, 1133, 1138, 1064, 1081, 1139, - /* 250 */ 1100, 1119, 1109, 1124, 1127, 1140, 1142, 1168, 1173, 1132, - /* 260 */ 1115, 1147, 1148, 1137, 1180, 1182, 1110, 1121, 1188, 1189, - /* 270 */ 1197, 1181, 1200, 1202, 1205, 1203, 1191, 1192, 1199, 1206, - /* 280 */ 1207, 1209, 1210, 1211, 1214, 1212, 1218, 1219, 1175, 1183, - /* 290 */ 1185, 1184, 1186, 1190, 1187, 1196, 1237, 1193, 1253, 1194, - /* 300 */ 1236, 1195, 1198, 1238, 1213, 1221, 1220, 1227, 1229, 1271, - /* 310 */ 1275, 1284, 1285, 1289, 1290, 1292, 1201, 1208, 1216, 1279, - /* 320 */ 1280, 1264, 1268, 1282, + /* 0 */ -147, 171, 263, -96, 358, -144, -149, -102, 124, -156, + /* 10 */ -98, 305, 401, -57, 209, -237, 245, -94, -79, 189, + /* 20 */ 375, 490, 493, 378, 303, 539, 542, 501, 503, 554, + /* 30 */ 415, 526, 546, 557, 587, 593, 595, -234, -234, -234, + /* 40 */ -234, -234, -234, -234, -234, -234, -234, -234, -234, -234, + /* 50 */ -234, -234, -234, -234, -234, -234, -234, -234, -234, -234, + /* 60 */ -234, -234, -234, -234, -234, -234, -234, -234, -234, -234, + /* 70 */ -234, -50, 335, 470, 633, 656, 658, 660, 675, 685, + /* 80 */ 703, 727, 747, 750, 752, 754, 770, 788, 790, 793, + /* 90 */ 795, 797, 800, 802, 804, 806, 813, 820, 829, 833, + /* 100 */ 836, 838, 843, 845, 847, 849, 873, 891, 893, 916, + /* 110 */ 918, 921, 936, 941, 944, 956, 961, -234, -234, -234, + /* 120 */ -234, -234, -234, -234, -234, -234, 463, 607, -176, 14, + /* 130 */ -139, 87, -137, 818, 925, 818, 925, 898, -234, -234, + /* 140 */ -234, -234, -166, -166, -166, -130, -131, -82, -54, -180, + /* 150 */ 364, 41, 513, 509, 509, 117, 500, 789, 796, 646, + /* 160 */ 192, 291, 644, 798, 120, 807, 543, 911, 920, 652, + /* 170 */ 924, 922, 232, 698, 801, 971, 39, 220, 731, 442, + /* 180 */ 902, -199, 979, -43, 421, 896, 942, 605, -184, -126, + /* 190 */ 155, 172, 281, 304, 377, 538, 650, 690, 699, 723, + /* 200 */ 803, 839, 853, 919, 991, 1018, 1067, 1092, 951, 1111, + /* 210 */ 1112, 1115, 1116, 1117, 1119, 1120, 1121, 1122, 1123, 1124, + /* 220 */ 1125, 1012, 1096, 1097, 1128, 1129, 1130, 1131, 1070, 1135, + /* 230 */ 1137, 1152, 1077, 1153, 1155, 1114, 1156, 304, 1158, 1172, + /* 240 */ 1173, 1174, 1175, 1176, 1089, 1091, 1133, 1098, 1126, 1139, + /* 250 */ 1140, 1070, 1133, 1133, 1170, 1163, 1186, 1103, 1168, 1138, + /* 260 */ 1141, 1110, 1169, 1171, 1132, 1177, 1189, 1194, 1181, 1200, + /* 270 */ 1204, 1166, 1145, 1178, 1187, 1232, 1142, 1231, 1233, 1149, + /* 280 */ 1150, 1238, 1179, 1182, 1212, 1205, 1219, 1220, 1221, 1222, + /* 290 */ 1258, 1266, 1223, 1224, 1206, 1211, 1237, 1239, 1230, 1269, + /* 300 */ 1272, 1195, 1197, 1280, 1284, 1268, 1285, 1289, 1290, 1293, + /* 310 */ 1274, 1286, 1287, 1288, 1282, 1294, 1292, 1297, 1300, 1296, + /* 320 */ 1301, 1306, 1304, 1249, 1250, 1308, 1271, 1275, 1273, 1276, + /* 330 */ 1279, 1281, 1283, 1302, 1334, 1307, 1243, 1267, 1318, 1322, + /* 340 */ 1303, 1371, 1299, 1328, 1332, 1340, 1342, 1384, 1391, 1400, + /* 350 */ 1403, 1407, 1408, 1409, 1311, 1312, 1310, 1405, 1402, 1412, + /* 360 */ 1417, 1420, 1406, 1393, 1395, 1421, 1422, 1423, 1424, 1415, }; static const YYACTIONTYPE yy_default[] = { - /* 0 */ 1270, 1260, 1260, 1260, 1193, 1193, 1193, 1193, 1260, 1088, - /* 10 */ 1117, 1117, 1244, 1322, 1322, 1322, 1322, 1322, 1322, 1192, - /* 20 */ 1322, 1322, 1322, 1322, 1260, 1092, 1123, 1322, 1322, 1322, - /* 30 */ 1322, 1194, 1195, 1322, 1322, 1322, 1243, 1245, 1133, 1132, - /* 40 */ 1131, 1130, 1226, 1104, 1128, 1121, 1125, 1194, 1188, 1189, - /* 50 */ 1187, 1191, 1195, 1322, 1124, 1158, 1172, 1157, 1322, 1322, - /* 60 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 70 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 80 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 90 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 100 */ 1322, 1322, 1322, 1322, 1166, 1171, 1178, 1170, 1167, 1160, - /* 110 */ 1159, 1161, 1162, 1322, 1011, 1059, 1322, 1322, 1322, 1163, - /* 120 */ 1322, 1164, 1175, 1174, 1173, 1251, 1278, 1277, 1322, 1322, - /* 130 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 140 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 150 */ 1322, 1322, 1322, 1322, 1322, 1270, 1260, 1017, 1017, 1322, - /* 160 */ 1260, 1260, 1260, 1260, 1260, 1260, 1256, 1092, 1083, 1322, - /* 170 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 180 */ 1248, 1246, 1322, 1208, 1322, 1322, 1322, 1322, 1322, 1322, - /* 190 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 200 */ 1322, 1322, 1322, 1322, 1088, 1322, 1322, 1322, 1322, 1322, - /* 210 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1272, 1322, 1221, - /* 220 */ 1088, 1088, 1088, 1090, 1072, 1082, 997, 1127, 1106, 1106, - /* 230 */ 1311, 1127, 1311, 1034, 1292, 1031, 1117, 1106, 1190, 1117, - /* 240 */ 1117, 1089, 1082, 1322, 1314, 1097, 1097, 1313, 1313, 1097, - /* 250 */ 1138, 1062, 1127, 1068, 1068, 1068, 1068, 1097, 1008, 1127, - /* 260 */ 1138, 1062, 1062, 1127, 1097, 1008, 1225, 1308, 1097, 1097, - /* 270 */ 1008, 1201, 1097, 1008, 1097, 1008, 1201, 1060, 1060, 1060, - /* 280 */ 1049, 1201, 1060, 1034, 1060, 1049, 1060, 1060, 1110, 1105, - /* 290 */ 1110, 1105, 1110, 1105, 1110, 1105, 1097, 1196, 1097, 1322, - /* 300 */ 1201, 1205, 1205, 1201, 1122, 1111, 1120, 1118, 1127, 1014, - /* 310 */ 1052, 1275, 1275, 1271, 1271, 1271, 1319, 1319, 1256, 1287, - /* 320 */ 1287, 1036, 1036, 1287, 1322, 1322, 1322, 1322, 1322, 1322, - /* 330 */ 1282, 1322, 1210, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 340 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 350 */ 1322, 1143, 1322, 993, 1253, 1322, 1322, 1252, 1322, 1322, - /* 360 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 370 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1310, 1322, - /* 380 */ 1322, 1322, 1322, 1322, 1322, 1224, 1223, 1322, 1322, 1322, - /* 390 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 400 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, - /* 410 */ 1074, 1322, 1322, 1322, 1296, 1322, 1322, 1322, 1322, 1322, - /* 420 */ 1322, 1322, 1119, 1322, 1112, 1322, 1322, 1301, 1322, 1322, - /* 430 */ 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1322, 1262, 1322, - /* 440 */ 1322, 1322, 1261, 1322, 1322, 1322, 1322, 1322, 1145, 1322, - /* 450 */ 1144, 1148, 1322, 1002, 1322, + /* 0 */ 1492, 1492, 1492, 1340, 1123, 1229, 1123, 1123, 1123, 1340, + /* 10 */ 1340, 1340, 1123, 1259, 1259, 1391, 1154, 1123, 1123, 1123, + /* 20 */ 1123, 1123, 1123, 1123, 1339, 1123, 1123, 1123, 1123, 1123, + /* 30 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1265, 1123, + /* 40 */ 1123, 1123, 1123, 1123, 1341, 1342, 1123, 1123, 1123, 1390, + /* 50 */ 1392, 1275, 1274, 1273, 1272, 1373, 1246, 1270, 1263, 1267, + /* 60 */ 1335, 1336, 1334, 1338, 1342, 1341, 1123, 1266, 1306, 1320, + /* 70 */ 1305, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 80 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 90 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 100 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 110 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1314, 1319, 1325, + /* 120 */ 1318, 1315, 1308, 1307, 1309, 1310, 1123, 1144, 1193, 1123, + /* 130 */ 1123, 1123, 1123, 1409, 1408, 1123, 1123, 1154, 1311, 1312, + /* 140 */ 1322, 1321, 1398, 1448, 1447, 1123, 1123, 1123, 1123, 1123, + /* 150 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 160 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 170 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1154, 1150, 1300, + /* 180 */ 1299, 1418, 1150, 1253, 1123, 1404, 1229, 1220, 1123, 1123, + /* 190 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 200 */ 1123, 1395, 1393, 1123, 1355, 1123, 1123, 1123, 1123, 1123, + /* 210 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 220 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 230 */ 1123, 1123, 1225, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 240 */ 1123, 1123, 1123, 1442, 1123, 1368, 1207, 1225, 1225, 1225, + /* 250 */ 1225, 1227, 1208, 1206, 1219, 1154, 1130, 1484, 1269, 1248, + /* 260 */ 1248, 1481, 1269, 1269, 1481, 1168, 1462, 1165, 1259, 1259, + /* 270 */ 1259, 1248, 1337, 1226, 1219, 1123, 1484, 1234, 1234, 1483, + /* 280 */ 1483, 1234, 1278, 1284, 1196, 1269, 1202, 1202, 1202, 1202, + /* 290 */ 1234, 1141, 1269, 1269, 1278, 1284, 1196, 1196, 1269, 1234, + /* 300 */ 1141, 1372, 1478, 1234, 1141, 1348, 1234, 1141, 1234, 1141, + /* 310 */ 1348, 1194, 1194, 1194, 1183, 1348, 1194, 1168, 1194, 1183, + /* 320 */ 1194, 1194, 1348, 1352, 1352, 1348, 1252, 1247, 1252, 1247, + /* 330 */ 1252, 1247, 1252, 1247, 1234, 1253, 1417, 1123, 1264, 1253, + /* 340 */ 1343, 1234, 1123, 1264, 1262, 1260, 1269, 1147, 1186, 1445, + /* 350 */ 1445, 1441, 1441, 1441, 1489, 1489, 1404, 1457, 1154, 1154, + /* 360 */ 1154, 1154, 1457, 1170, 1170, 1154, 1154, 1154, 1154, 1457, + /* 370 */ 1123, 1123, 1123, 1123, 1123, 1123, 1452, 1123, 1357, 1238, + /* 380 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 390 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 400 */ 1123, 1123, 1289, 1123, 1126, 1401, 1123, 1123, 1399, 1123, + /* 410 */ 1123, 1123, 1123, 1123, 1123, 1239, 1123, 1123, 1123, 1123, + /* 420 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 430 */ 1123, 1123, 1123, 1123, 1480, 1123, 1123, 1123, 1123, 1123, + /* 440 */ 1123, 1371, 1370, 1123, 1123, 1236, 1123, 1123, 1123, 1123, + /* 450 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 460 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 470 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 480 */ 1123, 1123, 1123, 1261, 1123, 1416, 1123, 1123, 1123, 1123, + /* 490 */ 1123, 1123, 1123, 1430, 1254, 1123, 1123, 1471, 1123, 1123, + /* 500 */ 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, 1123, + /* 510 */ 1123, 1123, 1466, 1210, 1291, 1123, 1290, 1294, 1123, 1135, + /* 520 */ 1123, }; /********** End of lemon-generated parsing tables *****************************/ @@ -137414,73 +147745,95 @@ static const YYCODETYPE yyFallback[] = { 0, /* $ => nothing */ 0, /* SEMI => nothing */ - 27, /* EXPLAIN => ID */ - 27, /* QUERY => ID */ - 27, /* PLAN => ID */ - 27, /* BEGIN => ID */ + 59, /* EXPLAIN => ID */ + 59, /* QUERY => ID */ + 59, /* PLAN => ID */ + 59, /* BEGIN => ID */ 0, /* TRANSACTION => nothing */ - 27, /* DEFERRED => ID */ - 27, /* IMMEDIATE => ID */ - 27, /* EXCLUSIVE => ID */ + 59, /* DEFERRED => ID */ + 59, /* IMMEDIATE => ID */ + 59, /* EXCLUSIVE => ID */ 0, /* COMMIT => nothing */ - 27, /* END => ID */ - 27, /* ROLLBACK => ID */ - 27, /* SAVEPOINT => ID */ - 27, /* RELEASE => ID */ + 59, /* END => ID */ + 59, /* ROLLBACK => ID */ + 59, /* SAVEPOINT => ID */ + 59, /* RELEASE => ID */ 0, /* TO => nothing */ 0, /* TABLE => nothing */ 0, /* CREATE => nothing */ - 27, /* IF => ID */ + 59, /* IF => ID */ 0, /* NOT => nothing */ 0, /* EXISTS => nothing */ - 27, /* TEMP => ID */ + 59, /* TEMP => ID */ 0, /* LP => nothing */ 0, /* RP => nothing */ 0, /* AS => nothing */ - 27, /* WITHOUT => ID */ + 59, /* WITHOUT => ID */ 0, /* COMMA => nothing */ + 59, /* ABORT => ID */ + 59, /* ACTION => ID */ + 59, /* AFTER => ID */ + 59, /* ANALYZE => ID */ + 59, /* ASC => ID */ + 59, /* ATTACH => ID */ + 59, /* BEFORE => ID */ + 59, /* BY => ID */ + 59, /* CASCADE => ID */ + 59, /* CAST => ID */ + 59, /* CONFLICT => ID */ + 59, /* DATABASE => ID */ + 59, /* DESC => ID */ + 59, /* DETACH => ID */ + 59, /* EACH => ID */ + 59, /* FAIL => ID */ + 0, /* OR => nothing */ + 0, /* AND => nothing */ + 0, /* IS => nothing */ + 59, /* MATCH => ID */ + 59, /* LIKE_KW => ID */ + 0, /* BETWEEN => nothing */ + 0, /* IN => nothing */ + 0, /* ISNULL => nothing */ + 0, /* NOTNULL => nothing */ + 0, /* NE => nothing */ + 0, /* EQ => nothing */ + 0, /* GT => nothing */ + 0, /* LE => nothing */ + 0, /* LT => nothing */ + 0, /* GE => nothing */ + 0, /* ESCAPE => nothing */ 0, /* ID => nothing */ - 27, /* ABORT => ID */ - 27, /* ACTION => ID */ - 27, /* AFTER => ID */ - 27, /* ANALYZE => ID */ - 27, /* ASC => ID */ - 27, /* ATTACH => ID */ - 27, /* BEFORE => ID */ - 27, /* BY => ID */ - 27, /* CASCADE => ID */ - 27, /* CAST => ID */ - 27, /* COLUMNKW => ID */ - 27, /* CONFLICT => ID */ - 27, /* DATABASE => ID */ - 27, /* DESC => ID */ - 27, /* DETACH => ID */ - 27, /* EACH => ID */ - 27, /* FAIL => ID */ - 27, /* FOR => ID */ - 27, /* IGNORE => ID */ - 27, /* INITIALLY => ID */ - 27, /* INSTEAD => ID */ - 27, /* LIKE_KW => ID */ - 27, /* MATCH => ID */ - 27, /* NO => ID */ - 27, /* KEY => ID */ - 27, /* OF => ID */ - 27, /* OFFSET => ID */ - 27, /* PRAGMA => ID */ - 27, /* RAISE => ID */ - 27, /* RECURSIVE => ID */ - 27, /* REPLACE => ID */ - 27, /* RESTRICT => ID */ - 27, /* ROW => ID */ - 27, /* TRIGGER => ID */ - 27, /* VACUUM => ID */ - 27, /* VIEW => ID */ - 27, /* VIRTUAL => ID */ - 27, /* WITH => ID */ - 27, /* REINDEX => ID */ - 27, /* RENAME => ID */ - 27, /* CTIME_KW => ID */ + 59, /* COLUMNKW => ID */ + 59, /* DO => ID */ + 59, /* FOR => ID */ + 59, /* IGNORE => ID */ + 59, /* INITIALLY => ID */ + 59, /* INSTEAD => ID */ + 59, /* NO => ID */ + 59, /* KEY => ID */ + 59, /* OF => ID */ + 59, /* OFFSET => ID */ + 59, /* PRAGMA => ID */ + 59, /* RAISE => ID */ + 59, /* RECURSIVE => ID */ + 59, /* REPLACE => ID */ + 59, /* RESTRICT => ID */ + 59, /* ROW => ID */ + 59, /* ROWS => ID */ + 59, /* TRIGGER => ID */ + 59, /* VACUUM => ID */ + 59, /* VIEW => ID */ + 59, /* VIRTUAL => ID */ + 59, /* WITH => ID */ + 59, /* CURRENT => ID */ + 59, /* FOLLOWING => ID */ + 59, /* PARTITION => ID */ + 59, /* PRECEDING => ID */ + 59, /* RANGE => ID */ + 59, /* UNBOUNDED => ID */ + 59, /* REINDEX => ID */ + 59, /* RENAME => ID */ + 59, /* CTIME_KW => ID */ }; #endif /* YYFALLBACK */ @@ -137520,6 +147873,7 @@ int yyerrcnt; /* Shifts left before out of the error */ #endif sqlite3ParserARG_SDECL /* A place to hold %extra_argument */ + sqlite3ParserCTX_SDECL /* A place to hold %extra_context */ #if YYSTACKDEPTH<=0 int yystksz; /* Current side of the stack */ yyStackEntry *yystack; /* The parser's stack */ @@ -137563,75 +147917,289 @@ } #endif /* NDEBUG */ -#ifndef NDEBUG +#if defined(YYCOVERAGE) || !defined(NDEBUG) /* For tracing shifts, the names of all terminals and nonterminals ** are required. The following table supplies these names */ static const char *const yyTokenName[] = { - "$", "SEMI", "EXPLAIN", "QUERY", - "PLAN", "BEGIN", "TRANSACTION", "DEFERRED", - "IMMEDIATE", "EXCLUSIVE", "COMMIT", "END", - "ROLLBACK", "SAVEPOINT", "RELEASE", "TO", - "TABLE", "CREATE", "IF", "NOT", - "EXISTS", "TEMP", "LP", "RP", - "AS", "WITHOUT", "COMMA", "ID", - "ABORT", "ACTION", "AFTER", "ANALYZE", - "ASC", "ATTACH", "BEFORE", "BY", - "CASCADE", "CAST", "COLUMNKW", "CONFLICT", - "DATABASE", "DESC", "DETACH", "EACH", - "FAIL", "FOR", "IGNORE", "INITIALLY", - "INSTEAD", "LIKE_KW", "MATCH", "NO", - "KEY", "OF", "OFFSET", "PRAGMA", - "RAISE", "RECURSIVE", "REPLACE", "RESTRICT", - "ROW", "TRIGGER", "VACUUM", "VIEW", - "VIRTUAL", "WITH", "REINDEX", "RENAME", - "CTIME_KW", "ANY", "OR", "AND", - "IS", "BETWEEN", "IN", "ISNULL", - "NOTNULL", "NE", "EQ", "GT", - "LE", "LT", "GE", "ESCAPE", - "BITAND", "BITOR", "LSHIFT", "RSHIFT", - "PLUS", "MINUS", "STAR", "SLASH", - "REM", "CONCAT", "COLLATE", "BITNOT", - "INDEXED", "STRING", "JOIN_KW", "CONSTRAINT", - "DEFAULT", "NULL", "PRIMARY", "UNIQUE", - "CHECK", "REFERENCES", "AUTOINCR", "ON", - "INSERT", "DELETE", "UPDATE", "SET", - "DEFERRABLE", "FOREIGN", "DROP", "UNION", - "ALL", "EXCEPT", "INTERSECT", "SELECT", - "VALUES", "DISTINCT", "DOT", "FROM", - "JOIN", "USING", "ORDER", "GROUP", - "HAVING", "LIMIT", "WHERE", "INTO", - "FLOAT", "BLOB", "INTEGER", "VARIABLE", - "CASE", "WHEN", "THEN", "ELSE", - "INDEX", "ALTER", "ADD", "error", - "input", "cmdlist", "ecmd", "explain", - "cmdx", "cmd", "transtype", "trans_opt", - "nm", "savepoint_opt", "create_table", "create_table_args", - "createkw", "temp", "ifnotexists", "dbnm", - "columnlist", "conslist_opt", "table_options", "select", - "columnname", "carglist", "typetoken", "typename", - "signed", "plus_num", "minus_num", "ccons", - "term", "expr", "onconf", "sortorder", - "autoinc", "eidlist_opt", "refargs", "defer_subclause", - "refarg", "refact", "init_deferred_pred_opt", "conslist", - "tconscomma", "tcons", "sortlist", "eidlist", - "defer_subclause_opt", "orconf", "resolvetype", "raisetype", - "ifexists", "fullname", "selectnowith", "oneselect", - "with", "multiselect_op", "distinct", "selcollist", - "from", "where_opt", "groupby_opt", "having_opt", - "orderby_opt", "limit_opt", "values", "nexprlist", - "exprlist", "sclp", "as", "seltablist", - "stl_prefix", "joinop", "indexed_opt", "on_opt", - "using_opt", "idlist", "setlist", "insert_cmd", - "idlist_opt", "likeop", "between_op", "in_op", - "paren_exprlist", "case_operand", "case_exprlist", "case_else", - "uniqueflag", "collate", "nmnum", "trigger_decl", - "trigger_cmd_list", "trigger_time", "trigger_event", "foreach_clause", - "when_clause", "trigger_cmd", "trnm", "tridxby", - "database_kw_opt", "key_opt", "add_column_fullname", "kwcolumn_opt", - "create_vtab", "vtabarglist", "vtabarg", "vtabargtoken", - "lp", "anylist", "wqlist", + /* 0 */ "$", + /* 1 */ "SEMI", + /* 2 */ "EXPLAIN", + /* 3 */ "QUERY", + /* 4 */ "PLAN", + /* 5 */ "BEGIN", + /* 6 */ "TRANSACTION", + /* 7 */ "DEFERRED", + /* 8 */ "IMMEDIATE", + /* 9 */ "EXCLUSIVE", + /* 10 */ "COMMIT", + /* 11 */ "END", + /* 12 */ "ROLLBACK", + /* 13 */ "SAVEPOINT", + /* 14 */ "RELEASE", + /* 15 */ "TO", + /* 16 */ "TABLE", + /* 17 */ "CREATE", + /* 18 */ "IF", + /* 19 */ "NOT", + /* 20 */ "EXISTS", + /* 21 */ "TEMP", + /* 22 */ "LP", + /* 23 */ "RP", + /* 24 */ "AS", + /* 25 */ "WITHOUT", + /* 26 */ "COMMA", + /* 27 */ "ABORT", + /* 28 */ "ACTION", + /* 29 */ "AFTER", + /* 30 */ "ANALYZE", + /* 31 */ "ASC", + /* 32 */ "ATTACH", + /* 33 */ "BEFORE", + /* 34 */ "BY", + /* 35 */ "CASCADE", + /* 36 */ "CAST", + /* 37 */ "CONFLICT", + /* 38 */ "DATABASE", + /* 39 */ "DESC", + /* 40 */ "DETACH", + /* 41 */ "EACH", + /* 42 */ "FAIL", + /* 43 */ "OR", + /* 44 */ "AND", + /* 45 */ "IS", + /* 46 */ "MATCH", + /* 47 */ "LIKE_KW", + /* 48 */ "BETWEEN", + /* 49 */ "IN", + /* 50 */ "ISNULL", + /* 51 */ "NOTNULL", + /* 52 */ "NE", + /* 53 */ "EQ", + /* 54 */ "GT", + /* 55 */ "LE", + /* 56 */ "LT", + /* 57 */ "GE", + /* 58 */ "ESCAPE", + /* 59 */ "ID", + /* 60 */ "COLUMNKW", + /* 61 */ "DO", + /* 62 */ "FOR", + /* 63 */ "IGNORE", + /* 64 */ "INITIALLY", + /* 65 */ "INSTEAD", + /* 66 */ "NO", + /* 67 */ "KEY", + /* 68 */ "OF", + /* 69 */ "OFFSET", + /* 70 */ "PRAGMA", + /* 71 */ "RAISE", + /* 72 */ "RECURSIVE", + /* 73 */ "REPLACE", + /* 74 */ "RESTRICT", + /* 75 */ "ROW", + /* 76 */ "ROWS", + /* 77 */ "TRIGGER", + /* 78 */ "VACUUM", + /* 79 */ "VIEW", + /* 80 */ "VIRTUAL", + /* 81 */ "WITH", + /* 82 */ "CURRENT", + /* 83 */ "FOLLOWING", + /* 84 */ "PARTITION", + /* 85 */ "PRECEDING", + /* 86 */ "RANGE", + /* 87 */ "UNBOUNDED", + /* 88 */ "REINDEX", + /* 89 */ "RENAME", + /* 90 */ "CTIME_KW", + /* 91 */ "ANY", + /* 92 */ "BITAND", + /* 93 */ "BITOR", + /* 94 */ "LSHIFT", + /* 95 */ "RSHIFT", + /* 96 */ "PLUS", + /* 97 */ "MINUS", + /* 98 */ "STAR", + /* 99 */ "SLASH", + /* 100 */ "REM", + /* 101 */ "CONCAT", + /* 102 */ "COLLATE", + /* 103 */ "BITNOT", + /* 104 */ "ON", + /* 105 */ "INDEXED", + /* 106 */ "STRING", + /* 107 */ "JOIN_KW", + /* 108 */ "CONSTRAINT", + /* 109 */ "DEFAULT", + /* 110 */ "NULL", + /* 111 */ "PRIMARY", + /* 112 */ "UNIQUE", + /* 113 */ "CHECK", + /* 114 */ "REFERENCES", + /* 115 */ "AUTOINCR", + /* 116 */ "INSERT", + /* 117 */ "DELETE", + /* 118 */ "UPDATE", + /* 119 */ "SET", + /* 120 */ "DEFERRABLE", + /* 121 */ "FOREIGN", + /* 122 */ "DROP", + /* 123 */ "UNION", + /* 124 */ "ALL", + /* 125 */ "EXCEPT", + /* 126 */ "INTERSECT", + /* 127 */ "SELECT", + /* 128 */ "VALUES", + /* 129 */ "DISTINCT", + /* 130 */ "DOT", + /* 131 */ "FROM", + /* 132 */ "JOIN", + /* 133 */ "USING", + /* 134 */ "ORDER", + /* 135 */ "GROUP", + /* 136 */ "HAVING", + /* 137 */ "LIMIT", + /* 138 */ "WHERE", + /* 139 */ "INTO", + /* 140 */ "NOTHING", + /* 141 */ "FLOAT", + /* 142 */ "BLOB", + /* 143 */ "INTEGER", + /* 144 */ "VARIABLE", + /* 145 */ "CASE", + /* 146 */ "WHEN", + /* 147 */ "THEN", + /* 148 */ "ELSE", + /* 149 */ "INDEX", + /* 150 */ "ALTER", + /* 151 */ "ADD", + /* 152 */ "WINDOW", + /* 153 */ "OVER", + /* 154 */ "FILTER", + /* 155 */ "input", + /* 156 */ "cmdlist", + /* 157 */ "ecmd", + /* 158 */ "cmdx", + /* 159 */ "explain", + /* 160 */ "cmd", + /* 161 */ "transtype", + /* 162 */ "trans_opt", + /* 163 */ "nm", + /* 164 */ "savepoint_opt", + /* 165 */ "create_table", + /* 166 */ "create_table_args", + /* 167 */ "createkw", + /* 168 */ "temp", + /* 169 */ "ifnotexists", + /* 170 */ "dbnm", + /* 171 */ "columnlist", + /* 172 */ "conslist_opt", + /* 173 */ "table_options", + /* 174 */ "select", + /* 175 */ "columnname", + /* 176 */ "carglist", + /* 177 */ "typetoken", + /* 178 */ "typename", + /* 179 */ "signed", + /* 180 */ "plus_num", + /* 181 */ "minus_num", + /* 182 */ "scanpt", + /* 183 */ "ccons", + /* 184 */ "term", + /* 185 */ "expr", + /* 186 */ "onconf", + /* 187 */ "sortorder", + /* 188 */ "autoinc", + /* 189 */ "eidlist_opt", + /* 190 */ "refargs", + /* 191 */ "defer_subclause", + /* 192 */ "refarg", + /* 193 */ "refact", + /* 194 */ "init_deferred_pred_opt", + /* 195 */ "conslist", + /* 196 */ "tconscomma", + /* 197 */ "tcons", + /* 198 */ "sortlist", + /* 199 */ "eidlist", + /* 200 */ "defer_subclause_opt", + /* 201 */ "orconf", + /* 202 */ "resolvetype", + /* 203 */ "raisetype", + /* 204 */ "ifexists", + /* 205 */ "fullname", + /* 206 */ "selectnowith", + /* 207 */ "oneselect", + /* 208 */ "wqlist", + /* 209 */ "multiselect_op", + /* 210 */ "distinct", + /* 211 */ "selcollist", + /* 212 */ "from", + /* 213 */ "where_opt", + /* 214 */ "groupby_opt", + /* 215 */ "having_opt", + /* 216 */ "orderby_opt", + /* 217 */ "limit_opt", + /* 218 */ "window_clause", + /* 219 */ "values", + /* 220 */ "nexprlist", + /* 221 */ "sclp", + /* 222 */ "as", + /* 223 */ "seltablist", + /* 224 */ "stl_prefix", + /* 225 */ "joinop", + /* 226 */ "indexed_opt", + /* 227 */ "on_opt", + /* 228 */ "using_opt", + /* 229 */ "exprlist", + /* 230 */ "xfullname", + /* 231 */ "idlist", + /* 232 */ "with", + /* 233 */ "setlist", + /* 234 */ "insert_cmd", + /* 235 */ "idlist_opt", + /* 236 */ "upsert", + /* 237 */ "over_clause", + /* 238 */ "likeop", + /* 239 */ "between_op", + /* 240 */ "in_op", + /* 241 */ "paren_exprlist", + /* 242 */ "case_operand", + /* 243 */ "case_exprlist", + /* 244 */ "case_else", + /* 245 */ "uniqueflag", + /* 246 */ "collate", + /* 247 */ "nmnum", + /* 248 */ "trigger_decl", + /* 249 */ "trigger_cmd_list", + /* 250 */ "trigger_time", + /* 251 */ "trigger_event", + /* 252 */ "foreach_clause", + /* 253 */ "when_clause", + /* 254 */ "trigger_cmd", + /* 255 */ "trnm", + /* 256 */ "tridxby", + /* 257 */ "database_kw_opt", + /* 258 */ "key_opt", + /* 259 */ "add_column_fullname", + /* 260 */ "kwcolumn_opt", + /* 261 */ "create_vtab", + /* 262 */ "vtabarglist", + /* 263 */ "vtabarg", + /* 264 */ "vtabargtoken", + /* 265 */ "lp", + /* 266 */ "anylist", + /* 267 */ "windowdefn_list", + /* 268 */ "windowdefn", + /* 269 */ "window", + /* 270 */ "frame_opt", + /* 271 */ "part_opt", + /* 272 */ "filter_opt", + /* 273 */ "range_or_rows", + /* 274 */ "frame_bound", + /* 275 */ "frame_bound_s", + /* 276 */ "frame_bound_e", }; -#endif /* NDEBUG */ +#endif /* defined(YYCOVERAGE) || !defined(NDEBUG) */ #ifndef NDEBUG /* For tracing reduce actions, the names of all rules are required. @@ -137665,307 +148233,345 @@ /* 25 */ "typetoken ::= typename LP signed RP", /* 26 */ "typetoken ::= typename LP signed COMMA signed RP", /* 27 */ "typename ::= typename ID|STRING", - /* 28 */ "ccons ::= CONSTRAINT nm", - /* 29 */ "ccons ::= DEFAULT term", - /* 30 */ "ccons ::= DEFAULT LP expr RP", - /* 31 */ "ccons ::= DEFAULT PLUS term", - /* 32 */ "ccons ::= DEFAULT MINUS term", - /* 33 */ "ccons ::= DEFAULT ID|INDEXED", - /* 34 */ "ccons ::= NOT NULL onconf", - /* 35 */ "ccons ::= PRIMARY KEY sortorder onconf autoinc", - /* 36 */ "ccons ::= UNIQUE onconf", - /* 37 */ "ccons ::= CHECK LP expr RP", - /* 38 */ "ccons ::= REFERENCES nm eidlist_opt refargs", - /* 39 */ "ccons ::= defer_subclause", - /* 40 */ "ccons ::= COLLATE ID|STRING", - /* 41 */ "autoinc ::=", - /* 42 */ "autoinc ::= AUTOINCR", - /* 43 */ "refargs ::=", - /* 44 */ "refargs ::= refargs refarg", - /* 45 */ "refarg ::= MATCH nm", - /* 46 */ "refarg ::= ON INSERT refact", - /* 47 */ "refarg ::= ON DELETE refact", - /* 48 */ "refarg ::= ON UPDATE refact", - /* 49 */ "refact ::= SET NULL", - /* 50 */ "refact ::= SET DEFAULT", - /* 51 */ "refact ::= CASCADE", - /* 52 */ "refact ::= RESTRICT", - /* 53 */ "refact ::= NO ACTION", - /* 54 */ "defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt", - /* 55 */ "defer_subclause ::= DEFERRABLE init_deferred_pred_opt", - /* 56 */ "init_deferred_pred_opt ::=", - /* 57 */ "init_deferred_pred_opt ::= INITIALLY DEFERRED", - /* 58 */ "init_deferred_pred_opt ::= INITIALLY IMMEDIATE", - /* 59 */ "conslist_opt ::=", - /* 60 */ "tconscomma ::= COMMA", - /* 61 */ "tcons ::= CONSTRAINT nm", - /* 62 */ "tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf", - /* 63 */ "tcons ::= UNIQUE LP sortlist RP onconf", - /* 64 */ "tcons ::= CHECK LP expr RP onconf", - /* 65 */ "tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt", - /* 66 */ "defer_subclause_opt ::=", - /* 67 */ "onconf ::=", - /* 68 */ "onconf ::= ON CONFLICT resolvetype", - /* 69 */ "orconf ::=", - /* 70 */ "orconf ::= OR resolvetype", - /* 71 */ "resolvetype ::= IGNORE", - /* 72 */ "resolvetype ::= REPLACE", - /* 73 */ "cmd ::= DROP TABLE ifexists fullname", - /* 74 */ "ifexists ::= IF EXISTS", - /* 75 */ "ifexists ::=", - /* 76 */ "cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select", - /* 77 */ "cmd ::= DROP VIEW ifexists fullname", - /* 78 */ "cmd ::= select", - /* 79 */ "select ::= with selectnowith", - /* 80 */ "selectnowith ::= selectnowith multiselect_op oneselect", - /* 81 */ "multiselect_op ::= UNION", - /* 82 */ "multiselect_op ::= UNION ALL", - /* 83 */ "multiselect_op ::= EXCEPT|INTERSECT", - /* 84 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt", - /* 85 */ "values ::= VALUES LP nexprlist RP", - /* 86 */ "values ::= values COMMA LP exprlist RP", - /* 87 */ "distinct ::= DISTINCT", - /* 88 */ "distinct ::= ALL", - /* 89 */ "distinct ::=", - /* 90 */ "sclp ::=", - /* 91 */ "selcollist ::= sclp expr as", - /* 92 */ "selcollist ::= sclp STAR", - /* 93 */ "selcollist ::= sclp nm DOT STAR", - /* 94 */ "as ::= AS nm", - /* 95 */ "as ::=", - /* 96 */ "from ::=", - /* 97 */ "from ::= FROM seltablist", - /* 98 */ "stl_prefix ::= seltablist joinop", - /* 99 */ "stl_prefix ::=", - /* 100 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt", - /* 101 */ "seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt", - /* 102 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt", - /* 103 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt", - /* 104 */ "dbnm ::=", - /* 105 */ "dbnm ::= DOT nm", - /* 106 */ "fullname ::= nm dbnm", - /* 107 */ "joinop ::= COMMA|JOIN", - /* 108 */ "joinop ::= JOIN_KW JOIN", - /* 109 */ "joinop ::= JOIN_KW nm JOIN", - /* 110 */ "joinop ::= JOIN_KW nm nm JOIN", - /* 111 */ "on_opt ::= ON expr", - /* 112 */ "on_opt ::=", - /* 113 */ "indexed_opt ::=", - /* 114 */ "indexed_opt ::= INDEXED BY nm", - /* 115 */ "indexed_opt ::= NOT INDEXED", - /* 116 */ "using_opt ::= USING LP idlist RP", - /* 117 */ "using_opt ::=", - /* 118 */ "orderby_opt ::=", - /* 119 */ "orderby_opt ::= ORDER BY sortlist", - /* 120 */ "sortlist ::= sortlist COMMA expr sortorder", - /* 121 */ "sortlist ::= expr sortorder", - /* 122 */ "sortorder ::= ASC", - /* 123 */ "sortorder ::= DESC", - /* 124 */ "sortorder ::=", - /* 125 */ "groupby_opt ::=", - /* 126 */ "groupby_opt ::= GROUP BY nexprlist", - /* 127 */ "having_opt ::=", - /* 128 */ "having_opt ::= HAVING expr", - /* 129 */ "limit_opt ::=", - /* 130 */ "limit_opt ::= LIMIT expr", - /* 131 */ "limit_opt ::= LIMIT expr OFFSET expr", - /* 132 */ "limit_opt ::= LIMIT expr COMMA expr", - /* 133 */ "cmd ::= with DELETE FROM fullname indexed_opt where_opt", - /* 134 */ "where_opt ::=", - /* 135 */ "where_opt ::= WHERE expr", - /* 136 */ "cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt", - /* 137 */ "setlist ::= setlist COMMA nm EQ expr", - /* 138 */ "setlist ::= setlist COMMA LP idlist RP EQ expr", - /* 139 */ "setlist ::= nm EQ expr", - /* 140 */ "setlist ::= LP idlist RP EQ expr", - /* 141 */ "cmd ::= with insert_cmd INTO fullname idlist_opt select", - /* 142 */ "cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES", - /* 143 */ "insert_cmd ::= INSERT orconf", - /* 144 */ "insert_cmd ::= REPLACE", - /* 145 */ "idlist_opt ::=", - /* 146 */ "idlist_opt ::= LP idlist RP", - /* 147 */ "idlist ::= idlist COMMA nm", - /* 148 */ "idlist ::= nm", - /* 149 */ "expr ::= LP expr RP", - /* 150 */ "expr ::= ID|INDEXED", - /* 151 */ "expr ::= JOIN_KW", - /* 152 */ "expr ::= nm DOT nm", - /* 153 */ "expr ::= nm DOT nm DOT nm", - /* 154 */ "term ::= NULL|FLOAT|BLOB", - /* 155 */ "term ::= STRING", - /* 156 */ "term ::= INTEGER", - /* 157 */ "expr ::= VARIABLE", - /* 158 */ "expr ::= expr COLLATE ID|STRING", - /* 159 */ "expr ::= CAST LP expr AS typetoken RP", - /* 160 */ "expr ::= ID|INDEXED LP distinct exprlist RP", - /* 161 */ "expr ::= ID|INDEXED LP STAR RP", - /* 162 */ "term ::= CTIME_KW", - /* 163 */ "expr ::= LP nexprlist COMMA expr RP", - /* 164 */ "expr ::= expr AND expr", - /* 165 */ "expr ::= expr OR expr", - /* 166 */ "expr ::= expr LT|GT|GE|LE expr", - /* 167 */ "expr ::= expr EQ|NE expr", - /* 168 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr", - /* 169 */ "expr ::= expr PLUS|MINUS expr", - /* 170 */ "expr ::= expr STAR|SLASH|REM expr", - /* 171 */ "expr ::= expr CONCAT expr", - /* 172 */ "likeop ::= NOT LIKE_KW|MATCH", - /* 173 */ "expr ::= expr likeop expr", - /* 174 */ "expr ::= expr likeop expr ESCAPE expr", - /* 175 */ "expr ::= expr ISNULL|NOTNULL", - /* 176 */ "expr ::= expr NOT NULL", - /* 177 */ "expr ::= expr IS expr", - /* 178 */ "expr ::= expr IS NOT expr", - /* 179 */ "expr ::= NOT expr", - /* 180 */ "expr ::= BITNOT expr", - /* 181 */ "expr ::= MINUS expr", - /* 182 */ "expr ::= PLUS expr", - /* 183 */ "between_op ::= BETWEEN", - /* 184 */ "between_op ::= NOT BETWEEN", - /* 185 */ "expr ::= expr between_op expr AND expr", - /* 186 */ "in_op ::= IN", - /* 187 */ "in_op ::= NOT IN", - /* 188 */ "expr ::= expr in_op LP exprlist RP", - /* 189 */ "expr ::= LP select RP", - /* 190 */ "expr ::= expr in_op LP select RP", - /* 191 */ "expr ::= expr in_op nm dbnm paren_exprlist", - /* 192 */ "expr ::= EXISTS LP select RP", - /* 193 */ "expr ::= CASE case_operand case_exprlist case_else END", - /* 194 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr", - /* 195 */ "case_exprlist ::= WHEN expr THEN expr", - /* 196 */ "case_else ::= ELSE expr", - /* 197 */ "case_else ::=", - /* 198 */ "case_operand ::= expr", - /* 199 */ "case_operand ::=", - /* 200 */ "exprlist ::=", - /* 201 */ "nexprlist ::= nexprlist COMMA expr", - /* 202 */ "nexprlist ::= expr", - /* 203 */ "paren_exprlist ::=", - /* 204 */ "paren_exprlist ::= LP exprlist RP", - /* 205 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt", - /* 206 */ "uniqueflag ::= UNIQUE", - /* 207 */ "uniqueflag ::=", - /* 208 */ "eidlist_opt ::=", - /* 209 */ "eidlist_opt ::= LP eidlist RP", - /* 210 */ "eidlist ::= eidlist COMMA nm collate sortorder", - /* 211 */ "eidlist ::= nm collate sortorder", - /* 212 */ "collate ::=", - /* 213 */ "collate ::= COLLATE ID|STRING", - /* 214 */ "cmd ::= DROP INDEX ifexists fullname", - /* 215 */ "cmd ::= VACUUM", - /* 216 */ "cmd ::= VACUUM nm", - /* 217 */ "cmd ::= PRAGMA nm dbnm", - /* 218 */ "cmd ::= PRAGMA nm dbnm EQ nmnum", - /* 219 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP", - /* 220 */ "cmd ::= PRAGMA nm dbnm EQ minus_num", - /* 221 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP", - /* 222 */ "plus_num ::= PLUS INTEGER|FLOAT", - /* 223 */ "minus_num ::= MINUS INTEGER|FLOAT", - /* 224 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END", - /* 225 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause", - /* 226 */ "trigger_time ::= BEFORE|AFTER", - /* 227 */ "trigger_time ::= INSTEAD OF", - /* 228 */ "trigger_time ::=", - /* 229 */ "trigger_event ::= DELETE|INSERT", - /* 230 */ "trigger_event ::= UPDATE", - /* 231 */ "trigger_event ::= UPDATE OF idlist", - /* 232 */ "when_clause ::=", - /* 233 */ "when_clause ::= WHEN expr", - /* 234 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI", - /* 235 */ "trigger_cmd_list ::= trigger_cmd SEMI", - /* 236 */ "trnm ::= nm DOT nm", - /* 237 */ "tridxby ::= INDEXED BY nm", - /* 238 */ "tridxby ::= NOT INDEXED", - /* 239 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt", - /* 240 */ "trigger_cmd ::= insert_cmd INTO trnm idlist_opt select", - /* 241 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt", - /* 242 */ "trigger_cmd ::= select", - /* 243 */ "expr ::= RAISE LP IGNORE RP", - /* 244 */ "expr ::= RAISE LP raisetype COMMA nm RP", - /* 245 */ "raisetype ::= ROLLBACK", - /* 246 */ "raisetype ::= ABORT", - /* 247 */ "raisetype ::= FAIL", - /* 248 */ "cmd ::= DROP TRIGGER ifexists fullname", - /* 249 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt", - /* 250 */ "cmd ::= DETACH database_kw_opt expr", - /* 251 */ "key_opt ::=", - /* 252 */ "key_opt ::= KEY expr", - /* 253 */ "cmd ::= REINDEX", - /* 254 */ "cmd ::= REINDEX nm dbnm", - /* 255 */ "cmd ::= ANALYZE", - /* 256 */ "cmd ::= ANALYZE nm dbnm", - /* 257 */ "cmd ::= ALTER TABLE fullname RENAME TO nm", - /* 258 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist", - /* 259 */ "add_column_fullname ::= fullname", - /* 260 */ "cmd ::= create_vtab", - /* 261 */ "cmd ::= create_vtab LP vtabarglist RP", - /* 262 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm", - /* 263 */ "vtabarg ::=", - /* 264 */ "vtabargtoken ::= ANY", - /* 265 */ "vtabargtoken ::= lp anylist RP", - /* 266 */ "lp ::= LP", - /* 267 */ "with ::=", - /* 268 */ "with ::= WITH wqlist", - /* 269 */ "with ::= WITH RECURSIVE wqlist", - /* 270 */ "wqlist ::= nm eidlist_opt AS LP select RP", - /* 271 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP", - /* 272 */ "input ::= cmdlist", - /* 273 */ "cmdlist ::= cmdlist ecmd", - /* 274 */ "cmdlist ::= ecmd", - /* 275 */ "ecmd ::= SEMI", - /* 276 */ "ecmd ::= explain cmdx SEMI", - /* 277 */ "explain ::=", - /* 278 */ "trans_opt ::=", - /* 279 */ "trans_opt ::= TRANSACTION", - /* 280 */ "trans_opt ::= TRANSACTION nm", - /* 281 */ "savepoint_opt ::= SAVEPOINT", - /* 282 */ "savepoint_opt ::=", - /* 283 */ "cmd ::= create_table create_table_args", - /* 284 */ "columnlist ::= columnlist COMMA columnname carglist", - /* 285 */ "columnlist ::= columnname carglist", - /* 286 */ "nm ::= ID|INDEXED", - /* 287 */ "nm ::= STRING", - /* 288 */ "nm ::= JOIN_KW", - /* 289 */ "typetoken ::= typename", - /* 290 */ "typename ::= ID|STRING", - /* 291 */ "signed ::= plus_num", - /* 292 */ "signed ::= minus_num", - /* 293 */ "carglist ::= carglist ccons", - /* 294 */ "carglist ::=", - /* 295 */ "ccons ::= NULL onconf", - /* 296 */ "conslist_opt ::= COMMA conslist", - /* 297 */ "conslist ::= conslist tconscomma tcons", - /* 298 */ "conslist ::= tcons", - /* 299 */ "tconscomma ::=", - /* 300 */ "defer_subclause_opt ::= defer_subclause", - /* 301 */ "resolvetype ::= raisetype", - /* 302 */ "selectnowith ::= oneselect", - /* 303 */ "oneselect ::= values", - /* 304 */ "sclp ::= selcollist COMMA", - /* 305 */ "as ::= ID|STRING", - /* 306 */ "expr ::= term", - /* 307 */ "likeop ::= LIKE_KW|MATCH", - /* 308 */ "exprlist ::= nexprlist", - /* 309 */ "nmnum ::= plus_num", - /* 310 */ "nmnum ::= nm", - /* 311 */ "nmnum ::= ON", - /* 312 */ "nmnum ::= DELETE", - /* 313 */ "nmnum ::= DEFAULT", - /* 314 */ "plus_num ::= INTEGER|FLOAT", - /* 315 */ "foreach_clause ::=", - /* 316 */ "foreach_clause ::= FOR EACH ROW", - /* 317 */ "trnm ::= nm", - /* 318 */ "tridxby ::=", - /* 319 */ "database_kw_opt ::= DATABASE", - /* 320 */ "database_kw_opt ::=", - /* 321 */ "kwcolumn_opt ::=", - /* 322 */ "kwcolumn_opt ::= COLUMNKW", - /* 323 */ "vtabarglist ::= vtabarg", - /* 324 */ "vtabarglist ::= vtabarglist COMMA vtabarg", - /* 325 */ "vtabarg ::= vtabarg vtabargtoken", - /* 326 */ "anylist ::=", - /* 327 */ "anylist ::= anylist LP anylist RP", - /* 328 */ "anylist ::= anylist ANY", + /* 28 */ "scanpt ::=", + /* 29 */ "ccons ::= CONSTRAINT nm", + /* 30 */ "ccons ::= DEFAULT scanpt term scanpt", + /* 31 */ "ccons ::= DEFAULT LP expr RP", + /* 32 */ "ccons ::= DEFAULT PLUS term scanpt", + /* 33 */ "ccons ::= DEFAULT MINUS term scanpt", + /* 34 */ "ccons ::= DEFAULT scanpt ID|INDEXED", + /* 35 */ "ccons ::= NOT NULL onconf", + /* 36 */ "ccons ::= PRIMARY KEY sortorder onconf autoinc", + /* 37 */ "ccons ::= UNIQUE onconf", + /* 38 */ "ccons ::= CHECK LP expr RP", + /* 39 */ "ccons ::= REFERENCES nm eidlist_opt refargs", + /* 40 */ "ccons ::= defer_subclause", + /* 41 */ "ccons ::= COLLATE ID|STRING", + /* 42 */ "autoinc ::=", + /* 43 */ "autoinc ::= AUTOINCR", + /* 44 */ "refargs ::=", + /* 45 */ "refargs ::= refargs refarg", + /* 46 */ "refarg ::= MATCH nm", + /* 47 */ "refarg ::= ON INSERT refact", + /* 48 */ "refarg ::= ON DELETE refact", + /* 49 */ "refarg ::= ON UPDATE refact", + /* 50 */ "refact ::= SET NULL", + /* 51 */ "refact ::= SET DEFAULT", + /* 52 */ "refact ::= CASCADE", + /* 53 */ "refact ::= RESTRICT", + /* 54 */ "refact ::= NO ACTION", + /* 55 */ "defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt", + /* 56 */ "defer_subclause ::= DEFERRABLE init_deferred_pred_opt", + /* 57 */ "init_deferred_pred_opt ::=", + /* 58 */ "init_deferred_pred_opt ::= INITIALLY DEFERRED", + /* 59 */ "init_deferred_pred_opt ::= INITIALLY IMMEDIATE", + /* 60 */ "conslist_opt ::=", + /* 61 */ "tconscomma ::= COMMA", + /* 62 */ "tcons ::= CONSTRAINT nm", + /* 63 */ "tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf", + /* 64 */ "tcons ::= UNIQUE LP sortlist RP onconf", + /* 65 */ "tcons ::= CHECK LP expr RP onconf", + /* 66 */ "tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt", + /* 67 */ "defer_subclause_opt ::=", + /* 68 */ "onconf ::=", + /* 69 */ "onconf ::= ON CONFLICT resolvetype", + /* 70 */ "orconf ::=", + /* 71 */ "orconf ::= OR resolvetype", + /* 72 */ "resolvetype ::= IGNORE", + /* 73 */ "resolvetype ::= REPLACE", + /* 74 */ "cmd ::= DROP TABLE ifexists fullname", + /* 75 */ "ifexists ::= IF EXISTS", + /* 76 */ "ifexists ::=", + /* 77 */ "cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select", + /* 78 */ "cmd ::= DROP VIEW ifexists fullname", + /* 79 */ "cmd ::= select", + /* 80 */ "select ::= WITH wqlist selectnowith", + /* 81 */ "select ::= WITH RECURSIVE wqlist selectnowith", + /* 82 */ "select ::= selectnowith", + /* 83 */ "selectnowith ::= selectnowith multiselect_op oneselect", + /* 84 */ "multiselect_op ::= UNION", + /* 85 */ "multiselect_op ::= UNION ALL", + /* 86 */ "multiselect_op ::= EXCEPT|INTERSECT", + /* 87 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt", + /* 88 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt window_clause orderby_opt limit_opt", + /* 89 */ "values ::= VALUES LP nexprlist RP", + /* 90 */ "values ::= values COMMA LP nexprlist RP", + /* 91 */ "distinct ::= DISTINCT", + /* 92 */ "distinct ::= ALL", + /* 93 */ "distinct ::=", + /* 94 */ "sclp ::=", + /* 95 */ "selcollist ::= sclp scanpt expr scanpt as", + /* 96 */ "selcollist ::= sclp scanpt STAR", + /* 97 */ "selcollist ::= sclp scanpt nm DOT STAR", + /* 98 */ "as ::= AS nm", + /* 99 */ "as ::=", + /* 100 */ "from ::=", + /* 101 */ "from ::= FROM seltablist", + /* 102 */ "stl_prefix ::= seltablist joinop", + /* 103 */ "stl_prefix ::=", + /* 104 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt", + /* 105 */ "seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt", + /* 106 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt", + /* 107 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt", + /* 108 */ "dbnm ::=", + /* 109 */ "dbnm ::= DOT nm", + /* 110 */ "fullname ::= nm", + /* 111 */ "fullname ::= nm DOT nm", + /* 112 */ "xfullname ::= nm", + /* 113 */ "xfullname ::= nm DOT nm", + /* 114 */ "xfullname ::= nm DOT nm AS nm", + /* 115 */ "xfullname ::= nm AS nm", + /* 116 */ "joinop ::= COMMA|JOIN", + /* 117 */ "joinop ::= JOIN_KW JOIN", + /* 118 */ "joinop ::= JOIN_KW nm JOIN", + /* 119 */ "joinop ::= JOIN_KW nm nm JOIN", + /* 120 */ "on_opt ::= ON expr", + /* 121 */ "on_opt ::=", + /* 122 */ "indexed_opt ::=", + /* 123 */ "indexed_opt ::= INDEXED BY nm", + /* 124 */ "indexed_opt ::= NOT INDEXED", + /* 125 */ "using_opt ::= USING LP idlist RP", + /* 126 */ "using_opt ::=", + /* 127 */ "orderby_opt ::=", + /* 128 */ "orderby_opt ::= ORDER BY sortlist", + /* 129 */ "sortlist ::= sortlist COMMA expr sortorder", + /* 130 */ "sortlist ::= expr sortorder", + /* 131 */ "sortorder ::= ASC", + /* 132 */ "sortorder ::= DESC", + /* 133 */ "sortorder ::=", + /* 134 */ "groupby_opt ::=", + /* 135 */ "groupby_opt ::= GROUP BY nexprlist", + /* 136 */ "having_opt ::=", + /* 137 */ "having_opt ::= HAVING expr", + /* 138 */ "limit_opt ::=", + /* 139 */ "limit_opt ::= LIMIT expr", + /* 140 */ "limit_opt ::= LIMIT expr OFFSET expr", + /* 141 */ "limit_opt ::= LIMIT expr COMMA expr", + /* 142 */ "cmd ::= with DELETE FROM xfullname indexed_opt where_opt", + /* 143 */ "where_opt ::=", + /* 144 */ "where_opt ::= WHERE expr", + /* 145 */ "cmd ::= with UPDATE orconf xfullname indexed_opt SET setlist where_opt", + /* 146 */ "setlist ::= setlist COMMA nm EQ expr", + /* 147 */ "setlist ::= setlist COMMA LP idlist RP EQ expr", + /* 148 */ "setlist ::= nm EQ expr", + /* 149 */ "setlist ::= LP idlist RP EQ expr", + /* 150 */ "cmd ::= with insert_cmd INTO xfullname idlist_opt select upsert", + /* 151 */ "cmd ::= with insert_cmd INTO xfullname idlist_opt DEFAULT VALUES", + /* 152 */ "upsert ::=", + /* 153 */ "upsert ::= ON CONFLICT LP sortlist RP where_opt DO UPDATE SET setlist where_opt", + /* 154 */ "upsert ::= ON CONFLICT LP sortlist RP where_opt DO NOTHING", + /* 155 */ "upsert ::= ON CONFLICT DO NOTHING", + /* 156 */ "insert_cmd ::= INSERT orconf", + /* 157 */ "insert_cmd ::= REPLACE", + /* 158 */ "idlist_opt ::=", + /* 159 */ "idlist_opt ::= LP idlist RP", + /* 160 */ "idlist ::= idlist COMMA nm", + /* 161 */ "idlist ::= nm", + /* 162 */ "expr ::= LP expr RP", + /* 163 */ "expr ::= ID|INDEXED", + /* 164 */ "expr ::= JOIN_KW", + /* 165 */ "expr ::= nm DOT nm", + /* 166 */ "expr ::= nm DOT nm DOT nm", + /* 167 */ "term ::= NULL|FLOAT|BLOB", + /* 168 */ "term ::= STRING", + /* 169 */ "term ::= INTEGER", + /* 170 */ "expr ::= VARIABLE", + /* 171 */ "expr ::= expr COLLATE ID|STRING", + /* 172 */ "expr ::= CAST LP expr AS typetoken RP", + /* 173 */ "expr ::= ID|INDEXED LP distinct exprlist RP", + /* 174 */ "expr ::= ID|INDEXED LP STAR RP", + /* 175 */ "expr ::= ID|INDEXED LP distinct exprlist RP over_clause", + /* 176 */ "expr ::= ID|INDEXED LP STAR RP over_clause", + /* 177 */ "term ::= CTIME_KW", + /* 178 */ "expr ::= LP nexprlist COMMA expr RP", + /* 179 */ "expr ::= expr AND expr", + /* 180 */ "expr ::= expr OR expr", + /* 181 */ "expr ::= expr LT|GT|GE|LE expr", + /* 182 */ "expr ::= expr EQ|NE expr", + /* 183 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr", + /* 184 */ "expr ::= expr PLUS|MINUS expr", + /* 185 */ "expr ::= expr STAR|SLASH|REM expr", + /* 186 */ "expr ::= expr CONCAT expr", + /* 187 */ "likeop ::= NOT LIKE_KW|MATCH", + /* 188 */ "expr ::= expr likeop expr", + /* 189 */ "expr ::= expr likeop expr ESCAPE expr", + /* 190 */ "expr ::= expr ISNULL|NOTNULL", + /* 191 */ "expr ::= expr NOT NULL", + /* 192 */ "expr ::= expr IS expr", + /* 193 */ "expr ::= expr IS NOT expr", + /* 194 */ "expr ::= NOT expr", + /* 195 */ "expr ::= BITNOT expr", + /* 196 */ "expr ::= PLUS|MINUS expr", + /* 197 */ "between_op ::= BETWEEN", + /* 198 */ "between_op ::= NOT BETWEEN", + /* 199 */ "expr ::= expr between_op expr AND expr", + /* 200 */ "in_op ::= IN", + /* 201 */ "in_op ::= NOT IN", + /* 202 */ "expr ::= expr in_op LP exprlist RP", + /* 203 */ "expr ::= LP select RP", + /* 204 */ "expr ::= expr in_op LP select RP", + /* 205 */ "expr ::= expr in_op nm dbnm paren_exprlist", + /* 206 */ "expr ::= EXISTS LP select RP", + /* 207 */ "expr ::= CASE case_operand case_exprlist case_else END", + /* 208 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr", + /* 209 */ "case_exprlist ::= WHEN expr THEN expr", + /* 210 */ "case_else ::= ELSE expr", + /* 211 */ "case_else ::=", + /* 212 */ "case_operand ::= expr", + /* 213 */ "case_operand ::=", + /* 214 */ "exprlist ::=", + /* 215 */ "nexprlist ::= nexprlist COMMA expr", + /* 216 */ "nexprlist ::= expr", + /* 217 */ "paren_exprlist ::=", + /* 218 */ "paren_exprlist ::= LP exprlist RP", + /* 219 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt", + /* 220 */ "uniqueflag ::= UNIQUE", + /* 221 */ "uniqueflag ::=", + /* 222 */ "eidlist_opt ::=", + /* 223 */ "eidlist_opt ::= LP eidlist RP", + /* 224 */ "eidlist ::= eidlist COMMA nm collate sortorder", + /* 225 */ "eidlist ::= nm collate sortorder", + /* 226 */ "collate ::=", + /* 227 */ "collate ::= COLLATE ID|STRING", + /* 228 */ "cmd ::= DROP INDEX ifexists fullname", + /* 229 */ "cmd ::= VACUUM", + /* 230 */ "cmd ::= VACUUM nm", + /* 231 */ "cmd ::= PRAGMA nm dbnm", + /* 232 */ "cmd ::= PRAGMA nm dbnm EQ nmnum", + /* 233 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP", + /* 234 */ "cmd ::= PRAGMA nm dbnm EQ minus_num", + /* 235 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP", + /* 236 */ "plus_num ::= PLUS INTEGER|FLOAT", + /* 237 */ "minus_num ::= MINUS INTEGER|FLOAT", + /* 238 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END", + /* 239 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause", + /* 240 */ "trigger_time ::= BEFORE|AFTER", + /* 241 */ "trigger_time ::= INSTEAD OF", + /* 242 */ "trigger_time ::=", + /* 243 */ "trigger_event ::= DELETE|INSERT", + /* 244 */ "trigger_event ::= UPDATE", + /* 245 */ "trigger_event ::= UPDATE OF idlist", + /* 246 */ "when_clause ::=", + /* 247 */ "when_clause ::= WHEN expr", + /* 248 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI", + /* 249 */ "trigger_cmd_list ::= trigger_cmd SEMI", + /* 250 */ "trnm ::= nm DOT nm", + /* 251 */ "tridxby ::= INDEXED BY nm", + /* 252 */ "tridxby ::= NOT INDEXED", + /* 253 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt", + /* 254 */ "trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select upsert scanpt", + /* 255 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt", + /* 256 */ "trigger_cmd ::= scanpt select scanpt", + /* 257 */ "expr ::= RAISE LP IGNORE RP", + /* 258 */ "expr ::= RAISE LP raisetype COMMA nm RP", + /* 259 */ "raisetype ::= ROLLBACK", + /* 260 */ "raisetype ::= ABORT", + /* 261 */ "raisetype ::= FAIL", + /* 262 */ "cmd ::= DROP TRIGGER ifexists fullname", + /* 263 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt", + /* 264 */ "cmd ::= DETACH database_kw_opt expr", + /* 265 */ "key_opt ::=", + /* 266 */ "key_opt ::= KEY expr", + /* 267 */ "cmd ::= REINDEX", + /* 268 */ "cmd ::= REINDEX nm dbnm", + /* 269 */ "cmd ::= ANALYZE", + /* 270 */ "cmd ::= ANALYZE nm dbnm", + /* 271 */ "cmd ::= ALTER TABLE fullname RENAME TO nm", + /* 272 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist", + /* 273 */ "add_column_fullname ::= fullname", + /* 274 */ "cmd ::= ALTER TABLE fullname RENAME kwcolumn_opt nm TO nm", + /* 275 */ "cmd ::= create_vtab", + /* 276 */ "cmd ::= create_vtab LP vtabarglist RP", + /* 277 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm", + /* 278 */ "vtabarg ::=", + /* 279 */ "vtabargtoken ::= ANY", + /* 280 */ "vtabargtoken ::= lp anylist RP", + /* 281 */ "lp ::= LP", + /* 282 */ "with ::= WITH wqlist", + /* 283 */ "with ::= WITH RECURSIVE wqlist", + /* 284 */ "wqlist ::= nm eidlist_opt AS LP select RP", + /* 285 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP", + /* 286 */ "windowdefn_list ::= windowdefn", + /* 287 */ "windowdefn_list ::= windowdefn_list COMMA windowdefn", + /* 288 */ "windowdefn ::= nm AS window", + /* 289 */ "window ::= LP part_opt orderby_opt frame_opt RP", + /* 290 */ "part_opt ::= PARTITION BY nexprlist", + /* 291 */ "part_opt ::=", + /* 292 */ "frame_opt ::=", + /* 293 */ "frame_opt ::= range_or_rows frame_bound_s", + /* 294 */ "frame_opt ::= range_or_rows BETWEEN frame_bound_s AND frame_bound_e", + /* 295 */ "range_or_rows ::= RANGE", + /* 296 */ "range_or_rows ::= ROWS", + /* 297 */ "frame_bound_s ::= frame_bound", + /* 298 */ "frame_bound_s ::= UNBOUNDED PRECEDING", + /* 299 */ "frame_bound_e ::= frame_bound", + /* 300 */ "frame_bound_e ::= UNBOUNDED FOLLOWING", + /* 301 */ "frame_bound ::= expr PRECEDING", + /* 302 */ "frame_bound ::= CURRENT ROW", + /* 303 */ "frame_bound ::= expr FOLLOWING", + /* 304 */ "window_clause ::= WINDOW windowdefn_list", + /* 305 */ "over_clause ::= filter_opt OVER window", + /* 306 */ "over_clause ::= filter_opt OVER nm", + /* 307 */ "filter_opt ::=", + /* 308 */ "filter_opt ::= FILTER LP WHERE expr RP", + /* 309 */ "input ::= cmdlist", + /* 310 */ "cmdlist ::= cmdlist ecmd", + /* 311 */ "cmdlist ::= ecmd", + /* 312 */ "ecmd ::= SEMI", + /* 313 */ "ecmd ::= cmdx SEMI", + /* 314 */ "ecmd ::= explain cmdx", + /* 315 */ "trans_opt ::=", + /* 316 */ "trans_opt ::= TRANSACTION", + /* 317 */ "trans_opt ::= TRANSACTION nm", + /* 318 */ "savepoint_opt ::= SAVEPOINT", + /* 319 */ "savepoint_opt ::=", + /* 320 */ "cmd ::= create_table create_table_args", + /* 321 */ "columnlist ::= columnlist COMMA columnname carglist", + /* 322 */ "columnlist ::= columnname carglist", + /* 323 */ "nm ::= ID|INDEXED", + /* 324 */ "nm ::= STRING", + /* 325 */ "nm ::= JOIN_KW", + /* 326 */ "typetoken ::= typename", + /* 327 */ "typename ::= ID|STRING", + /* 328 */ "signed ::= plus_num", + /* 329 */ "signed ::= minus_num", + /* 330 */ "carglist ::= carglist ccons", + /* 331 */ "carglist ::=", + /* 332 */ "ccons ::= NULL onconf", + /* 333 */ "conslist_opt ::= COMMA conslist", + /* 334 */ "conslist ::= conslist tconscomma tcons", + /* 335 */ "conslist ::= tcons", + /* 336 */ "tconscomma ::=", + /* 337 */ "defer_subclause_opt ::= defer_subclause", + /* 338 */ "resolvetype ::= raisetype", + /* 339 */ "selectnowith ::= oneselect", + /* 340 */ "oneselect ::= values", + /* 341 */ "sclp ::= selcollist COMMA", + /* 342 */ "as ::= ID|STRING", + /* 343 */ "expr ::= term", + /* 344 */ "likeop ::= LIKE_KW|MATCH", + /* 345 */ "exprlist ::= nexprlist", + /* 346 */ "nmnum ::= plus_num", + /* 347 */ "nmnum ::= nm", + /* 348 */ "nmnum ::= ON", + /* 349 */ "nmnum ::= DELETE", + /* 350 */ "nmnum ::= DEFAULT", + /* 351 */ "plus_num ::= INTEGER|FLOAT", + /* 352 */ "foreach_clause ::=", + /* 353 */ "foreach_clause ::= FOR EACH ROW", + /* 354 */ "trnm ::= nm", + /* 355 */ "tridxby ::=", + /* 356 */ "database_kw_opt ::= DATABASE", + /* 357 */ "database_kw_opt ::=", + /* 358 */ "kwcolumn_opt ::=", + /* 359 */ "kwcolumn_opt ::= COLUMNKW", + /* 360 */ "vtabarglist ::= vtabarg", + /* 361 */ "vtabarglist ::= vtabarglist COMMA vtabarg", + /* 362 */ "vtabarg ::= vtabarg vtabargtoken", + /* 363 */ "anylist ::=", + /* 364 */ "anylist ::= anylist LP anylist RP", + /* 365 */ "anylist ::= anylist ANY", + /* 366 */ "with ::=", }; #endif /* NDEBUG */ @@ -138014,28 +148620,29 @@ /* Initialize a new parser that has already been allocated. */ -SQLITE_PRIVATE void sqlite3ParserInit(void *yypParser){ - yyParser *pParser = (yyParser*)yypParser; +SQLITE_PRIVATE void sqlite3ParserInit(void *yypRawParser sqlite3ParserCTX_PDECL){ + yyParser *yypParser = (yyParser*)yypRawParser; + sqlite3ParserCTX_STORE #ifdef YYTRACKMAXSTACKDEPTH - pParser->yyhwm = 0; + yypParser->yyhwm = 0; #endif #if YYSTACKDEPTH<=0 - pParser->yytos = NULL; - pParser->yystack = NULL; - pParser->yystksz = 0; - if( yyGrowStack(pParser) ){ - pParser->yystack = &pParser->yystk0; - pParser->yystksz = 1; + yypParser->yytos = NULL; + yypParser->yystack = NULL; + yypParser->yystksz = 0; + if( yyGrowStack(yypParser) ){ + yypParser->yystack = &yypParser->yystk0; + yypParser->yystksz = 1; } #endif #ifndef YYNOERRORRECOVERY - pParser->yyerrcnt = -1; + yypParser->yyerrcnt = -1; #endif - pParser->yytos = pParser->yystack; - pParser->yystack[0].stateno = 0; - pParser->yystack[0].major = 0; + yypParser->yytos = yypParser->yystack; + yypParser->yystack[0].stateno = 0; + yypParser->yystack[0].major = 0; #if YYSTACKDEPTH>0 - pParser->yystackEnd = &pParser->yystack[YYSTACKDEPTH-1]; + yypParser->yystackEnd = &yypParser->yystack[YYSTACKDEPTH-1]; #endif } @@ -138052,11 +148659,14 @@ ** A pointer to a parser. This pointer is used in subsequent calls ** to sqlite3Parser and sqlite3ParserFree. */ -SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(YYMALLOCARGTYPE)){ - yyParser *pParser; - pParser = (yyParser*)(*mallocProc)( (YYMALLOCARGTYPE)sizeof(yyParser) ); - if( pParser ) sqlite3ParserInit(pParser); - return pParser; +SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(YYMALLOCARGTYPE) sqlite3ParserCTX_PDECL){ + yyParser *yypParser; + yypParser = (yyParser*)(*mallocProc)( (YYMALLOCARGTYPE)sizeof(yyParser) ); + if( yypParser ){ + sqlite3ParserCTX_STORE + sqlite3ParserInit(yypParser sqlite3ParserCTX_PARAM); + } + return (void*)yypParser; } #endif /* sqlite3Parser_ENGINEALWAYSONSTACK */ @@ -138073,7 +148683,8 @@ YYCODETYPE yymajor, /* Type code for object to destroy */ YYMINORTYPE *yypminor /* The object to be destroyed */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH switch( yymajor ){ /* Here is inserted the actions which take place when a ** terminal or non-terminal is destroyed. This can happen @@ -138086,79 +148697,98 @@ ** inside the C code. */ /********* Begin destructor definitions ***************************************/ - case 163: /* select */ - case 194: /* selectnowith */ - case 195: /* oneselect */ - case 206: /* values */ + case 174: /* select */ + case 206: /* selectnowith */ + case 207: /* oneselect */ + case 219: /* values */ { -sqlite3SelectDelete(pParse->db, (yypminor->yy243)); +sqlite3SelectDelete(pParse->db, (yypminor->yy489)); } break; - case 172: /* term */ - case 173: /* expr */ + case 184: /* term */ + case 185: /* expr */ + case 213: /* where_opt */ + case 215: /* having_opt */ + case 227: /* on_opt */ + case 242: /* case_operand */ + case 244: /* case_else */ + case 253: /* when_clause */ + case 258: /* key_opt */ + case 272: /* filter_opt */ { -sqlite3ExprDelete(pParse->db, (yypminor->yy190).pExpr); +sqlite3ExprDelete(pParse->db, (yypminor->yy18)); } break; - case 177: /* eidlist_opt */ - case 186: /* sortlist */ - case 187: /* eidlist */ - case 199: /* selcollist */ - case 202: /* groupby_opt */ - case 204: /* orderby_opt */ - case 207: /* nexprlist */ - case 208: /* exprlist */ - case 209: /* sclp */ - case 218: /* setlist */ - case 224: /* paren_exprlist */ - case 226: /* case_exprlist */ + case 189: /* eidlist_opt */ + case 198: /* sortlist */ + case 199: /* eidlist */ + case 211: /* selcollist */ + case 214: /* groupby_opt */ + case 216: /* orderby_opt */ + case 220: /* nexprlist */ + case 221: /* sclp */ + case 229: /* exprlist */ + case 233: /* setlist */ + case 241: /* paren_exprlist */ + case 243: /* case_exprlist */ + case 271: /* part_opt */ { -sqlite3ExprListDelete(pParse->db, (yypminor->yy148)); +sqlite3ExprListDelete(pParse->db, (yypminor->yy420)); } break; - case 193: /* fullname */ - case 200: /* from */ - case 211: /* seltablist */ - case 212: /* stl_prefix */ + case 205: /* fullname */ + case 212: /* from */ + case 223: /* seltablist */ + case 224: /* stl_prefix */ + case 230: /* xfullname */ { -sqlite3SrcListDelete(pParse->db, (yypminor->yy185)); +sqlite3SrcListDelete(pParse->db, (yypminor->yy135)); } break; - case 196: /* with */ - case 250: /* wqlist */ + case 208: /* wqlist */ { -sqlite3WithDelete(pParse->db, (yypminor->yy285)); +sqlite3WithDelete(pParse->db, (yypminor->yy449)); } break; - case 201: /* where_opt */ - case 203: /* having_opt */ - case 215: /* on_opt */ - case 225: /* case_operand */ - case 227: /* case_else */ - case 236: /* when_clause */ - case 241: /* key_opt */ + case 218: /* window_clause */ + case 267: /* windowdefn_list */ { -sqlite3ExprDelete(pParse->db, (yypminor->yy72)); +sqlite3WindowListDelete(pParse->db, (yypminor->yy327)); } break; - case 216: /* using_opt */ - case 217: /* idlist */ - case 220: /* idlist_opt */ + case 228: /* using_opt */ + case 231: /* idlist */ + case 235: /* idlist_opt */ { -sqlite3IdListDelete(pParse->db, (yypminor->yy254)); +sqlite3IdListDelete(pParse->db, (yypminor->yy48)); } break; - case 232: /* trigger_cmd_list */ - case 237: /* trigger_cmd */ + case 237: /* over_clause */ + case 268: /* windowdefn */ + case 269: /* window */ + case 270: /* frame_opt */ { -sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy145)); +sqlite3WindowDelete(pParse->db, (yypminor->yy327)); } break; - case 234: /* trigger_event */ + case 249: /* trigger_cmd_list */ + case 254: /* trigger_cmd */ { -sqlite3IdListDelete(pParse->db, (yypminor->yy332).b); +sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy207)); } break; + case 251: /* trigger_event */ +{ +sqlite3IdListDelete(pParse->db, (yypminor->yy34).b); +} + break; + case 274: /* frame_bound */ + case 275: /* frame_bound_s */ + case 276: /* frame_bound_e */ +{ +sqlite3ExprDelete(pParse->db, (yypminor->yy119).pExpr); +} + break; /********* End destructor definitions *****************************************/ default: break; /* If no destructor action specified: do nothing */ } @@ -138227,24 +148857,66 @@ } #endif +/* This array of booleans keeps track of the parser statement +** coverage. The element yycoverage[X][Y] is set when the parser +** is in state X and has a lookahead token Y. In a well-tested +** systems, every element of this matrix should end up being set. +*/ +#if defined(YYCOVERAGE) +static unsigned char yycoverage[YYNSTATE][YYNTOKEN]; +#endif + /* +** Write into out a description of every state/lookahead combination that +** +** (1) has not been used by the parser, and +** (2) is not a syntax error. +** +** Return the number of missed state/lookahead combinations. +*/ +#if defined(YYCOVERAGE) +SQLITE_PRIVATE int sqlite3ParserCoverage(FILE *out){ + int stateno, iLookAhead, i; + int nMissed = 0; + for(stateno=0; statenoyytos->stateno; - - if( stateno>=YY_MIN_REDUCE ) return stateno; + + if( stateno>YY_MAX_SHIFT ) return stateno; assert( stateno <= YY_SHIFT_COUNT ); +#if defined(YYCOVERAGE) + yycoverage[stateno][iLookAhead] = 1; +#endif do{ i = yy_shift_ofst[stateno]; + assert( i>=0 ); + /* assert( i+YYNTOKEN<=(int)YY_NLOOKAHEAD ); */ assert( iLookAhead!=YYNOCODE ); + assert( iLookAhead < YYNTOKEN ); i += iLookAhead; - if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){ + if( i>=YY_NLOOKAHEAD || yy_lookahead[i]!=iLookAhead ){ #ifdef YYFALLBACK YYCODETYPE iFallback; /* Fallback token */ if( iLookAhead=YY_ACTTAB_COUNT j0 ){ #ifndef NDEBUG @@ -138294,8 +148967,8 @@ ** Find the appropriate action for a parser given the non-terminal ** look-ahead token iLookAhead. */ -static int yy_find_reduce_action( - int stateno, /* Current state number */ +static YYACTIONTYPE yy_find_reduce_action( + YYACTIONTYPE stateno, /* Current state number */ YYCODETYPE iLookAhead /* The look-ahead token */ ){ int i; @@ -138307,7 +148980,6 @@ assert( stateno<=YY_REDUCE_COUNT ); #endif i = yy_reduce_ofst[stateno]; - assert( i!=YY_REDUCE_USE_DFLT ); assert( iLookAhead!=YYNOCODE ); i += iLookAhead; #ifdef YYERRORSYMBOL @@ -138325,7 +148997,8 @@ ** The following routine is called if the stack overflows. */ static void yyStackOverflow(yyParser *yypParser){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #ifndef NDEBUG if( yyTraceFILE ){ fprintf(yyTraceFILE,"%sStack Overflow!\n",yyTracePrompt); @@ -138338,7 +149011,8 @@ sqlite3ErrorMsg(pParse, "parser stack overflow"); /******** End %stack_overflow code ********************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument var */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument var */ + sqlite3ParserCTX_STORE } /* @@ -138345,20 +149019,21 @@ ** Print tracing information for a SHIFT action */ #ifndef NDEBUG -static void yyTraceShift(yyParser *yypParser, int yyNewState){ +static void yyTraceShift(yyParser *yypParser, int yyNewState, const char *zTag){ if( yyTraceFILE ){ if( yyNewStateyytos->major], + fprintf(yyTraceFILE,"%s%s '%s', go to state %d\n", + yyTracePrompt, zTag, yyTokenName[yypParser->yytos->major], yyNewState); }else{ - fprintf(yyTraceFILE,"%sShift '%s'\n", - yyTracePrompt,yyTokenName[yypParser->yytos->major]); + fprintf(yyTraceFILE,"%s%s '%s', pending reduce %d\n", + yyTracePrompt, zTag, yyTokenName[yypParser->yytos->major], + yyNewState - YY_MIN_REDUCE); } } } #else -# define yyTraceShift(X,Y) +# define yyTraceShift(X,Y,Z) #endif /* @@ -138366,8 +149041,8 @@ */ static void yy_shift( yyParser *yypParser, /* The parser to be shifted */ - int yyNewState, /* The new state to shift in */ - int yyMajor, /* The major token to shift in */ + YYACTIONTYPE yyNewState, /* The new state to shift in */ + YYCODETYPE yyMajor, /* The major token to shift in */ sqlite3ParserTOKENTYPE yyMinor /* The minor token to shift in */ ){ yyStackEntry *yytos; @@ -138397,10 +149072,10 @@ yyNewState += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE; } yytos = yypParser->yytos; - yytos->stateno = (YYACTIONTYPE)yyNewState; - yytos->major = (YYCODETYPE)yyMajor; + yytos->stateno = yyNewState; + yytos->major = yyMajor; yytos->minor.yy0 = yyMinor; - yyTraceShift(yypParser, yyNewState); + yyTraceShift(yypParser, yyNewState, "Shift"); } /* The following table contains information about every rule that @@ -138410,335 +149085,373 @@ YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ signed char nrhs; /* Negative of the number of RHS symbols in the rule */ } yyRuleInfo[] = { - { 147, -1 }, - { 147, -3 }, - { 148, -1 }, - { 149, -3 }, - { 150, 0 }, - { 150, -1 }, - { 150, -1 }, - { 150, -1 }, - { 149, -2 }, - { 149, -2 }, - { 149, -2 }, - { 149, -3 }, - { 149, -5 }, - { 154, -6 }, - { 156, -1 }, - { 158, 0 }, - { 158, -3 }, - { 157, -1 }, - { 157, 0 }, - { 155, -5 }, - { 155, -2 }, - { 162, 0 }, - { 162, -2 }, - { 164, -2 }, - { 166, 0 }, - { 166, -4 }, - { 166, -6 }, - { 167, -2 }, - { 171, -2 }, - { 171, -2 }, - { 171, -4 }, - { 171, -3 }, - { 171, -3 }, - { 171, -2 }, - { 171, -3 }, - { 171, -5 }, - { 171, -2 }, - { 171, -4 }, - { 171, -4 }, - { 171, -1 }, - { 171, -2 }, - { 176, 0 }, - { 176, -1 }, - { 178, 0 }, - { 178, -2 }, - { 180, -2 }, - { 180, -3 }, - { 180, -3 }, - { 180, -3 }, - { 181, -2 }, - { 181, -2 }, - { 181, -1 }, - { 181, -1 }, - { 181, -2 }, - { 179, -3 }, - { 179, -2 }, - { 182, 0 }, - { 182, -2 }, - { 182, -2 }, - { 161, 0 }, - { 184, -1 }, - { 185, -2 }, - { 185, -7 }, - { 185, -5 }, - { 185, -5 }, - { 185, -10 }, - { 188, 0 }, - { 174, 0 }, - { 174, -3 }, - { 189, 0 }, - { 189, -2 }, - { 190, -1 }, - { 190, -1 }, - { 149, -4 }, - { 192, -2 }, - { 192, 0 }, - { 149, -9 }, - { 149, -4 }, - { 149, -1 }, - { 163, -2 }, - { 194, -3 }, - { 197, -1 }, - { 197, -2 }, - { 197, -1 }, - { 195, -9 }, - { 206, -4 }, - { 206, -5 }, - { 198, -1 }, - { 198, -1 }, - { 198, 0 }, - { 209, 0 }, - { 199, -3 }, - { 199, -2 }, - { 199, -4 }, - { 210, -2 }, - { 210, 0 }, - { 200, 0 }, - { 200, -2 }, - { 212, -2 }, - { 212, 0 }, - { 211, -7 }, - { 211, -9 }, - { 211, -7 }, - { 211, -7 }, - { 159, 0 }, - { 159, -2 }, - { 193, -2 }, - { 213, -1 }, - { 213, -2 }, - { 213, -3 }, - { 213, -4 }, - { 215, -2 }, - { 215, 0 }, - { 214, 0 }, - { 214, -3 }, - { 214, -2 }, - { 216, -4 }, - { 216, 0 }, - { 204, 0 }, - { 204, -3 }, - { 186, -4 }, - { 186, -2 }, - { 175, -1 }, - { 175, -1 }, - { 175, 0 }, - { 202, 0 }, - { 202, -3 }, - { 203, 0 }, - { 203, -2 }, - { 205, 0 }, - { 205, -2 }, - { 205, -4 }, - { 205, -4 }, - { 149, -6 }, - { 201, 0 }, - { 201, -2 }, - { 149, -8 }, - { 218, -5 }, - { 218, -7 }, - { 218, -3 }, - { 218, -5 }, - { 149, -6 }, - { 149, -7 }, - { 219, -2 }, - { 219, -1 }, - { 220, 0 }, - { 220, -3 }, - { 217, -3 }, - { 217, -1 }, - { 173, -3 }, - { 173, -1 }, - { 173, -1 }, - { 173, -3 }, - { 173, -5 }, - { 172, -1 }, - { 172, -1 }, - { 172, -1 }, - { 173, -1 }, - { 173, -3 }, - { 173, -6 }, - { 173, -5 }, - { 173, -4 }, - { 172, -1 }, - { 173, -5 }, - { 173, -3 }, - { 173, -3 }, - { 173, -3 }, - { 173, -3 }, - { 173, -3 }, - { 173, -3 }, - { 173, -3 }, - { 173, -3 }, - { 221, -2 }, - { 173, -3 }, - { 173, -5 }, - { 173, -2 }, - { 173, -3 }, - { 173, -3 }, - { 173, -4 }, - { 173, -2 }, - { 173, -2 }, - { 173, -2 }, - { 173, -2 }, - { 222, -1 }, - { 222, -2 }, - { 173, -5 }, - { 223, -1 }, - { 223, -2 }, - { 173, -5 }, - { 173, -3 }, - { 173, -5 }, - { 173, -5 }, - { 173, -4 }, - { 173, -5 }, - { 226, -5 }, - { 226, -4 }, - { 227, -2 }, - { 227, 0 }, - { 225, -1 }, - { 225, 0 }, - { 208, 0 }, - { 207, -3 }, - { 207, -1 }, - { 224, 0 }, - { 224, -3 }, - { 149, -12 }, - { 228, -1 }, - { 228, 0 }, - { 177, 0 }, - { 177, -3 }, - { 187, -5 }, - { 187, -3 }, - { 229, 0 }, - { 229, -2 }, - { 149, -4 }, - { 149, -1 }, - { 149, -2 }, - { 149, -3 }, - { 149, -5 }, - { 149, -6 }, - { 149, -5 }, - { 149, -6 }, - { 169, -2 }, - { 170, -2 }, - { 149, -5 }, - { 231, -11 }, - { 233, -1 }, - { 233, -2 }, - { 233, 0 }, - { 234, -1 }, - { 234, -1 }, - { 234, -3 }, - { 236, 0 }, - { 236, -2 }, - { 232, -3 }, - { 232, -2 }, - { 238, -3 }, - { 239, -3 }, - { 239, -2 }, - { 237, -7 }, - { 237, -5 }, - { 237, -5 }, - { 237, -1 }, - { 173, -4 }, - { 173, -6 }, - { 191, -1 }, - { 191, -1 }, - { 191, -1 }, - { 149, -4 }, - { 149, -6 }, - { 149, -3 }, - { 241, 0 }, - { 241, -2 }, - { 149, -1 }, - { 149, -3 }, - { 149, -1 }, - { 149, -3 }, - { 149, -6 }, - { 149, -7 }, - { 242, -1 }, - { 149, -1 }, - { 149, -4 }, - { 244, -8 }, - { 246, 0 }, - { 247, -1 }, - { 247, -3 }, - { 248, -1 }, - { 196, 0 }, - { 196, -2 }, - { 196, -3 }, - { 250, -6 }, - { 250, -8 }, - { 144, -1 }, - { 145, -2 }, - { 145, -1 }, - { 146, -1 }, - { 146, -3 }, - { 147, 0 }, - { 151, 0 }, - { 151, -1 }, - { 151, -2 }, - { 153, -1 }, - { 153, 0 }, - { 149, -2 }, - { 160, -4 }, - { 160, -2 }, - { 152, -1 }, - { 152, -1 }, - { 152, -1 }, - { 166, -1 }, - { 167, -1 }, - { 168, -1 }, - { 168, -1 }, - { 165, -2 }, - { 165, 0 }, - { 171, -2 }, - { 161, -2 }, - { 183, -3 }, - { 183, -1 }, - { 184, 0 }, - { 188, -1 }, - { 190, -1 }, - { 194, -1 }, - { 195, -1 }, - { 209, -2 }, - { 210, -1 }, - { 173, -1 }, - { 221, -1 }, - { 208, -1 }, - { 230, -1 }, - { 230, -1 }, - { 230, -1 }, - { 230, -1 }, - { 230, -1 }, - { 169, -1 }, - { 235, 0 }, - { 235, -3 }, - { 238, -1 }, - { 239, 0 }, - { 240, -1 }, - { 240, 0 }, - { 243, 0 }, - { 243, -1 }, - { 245, -1 }, - { 245, -3 }, - { 246, -2 }, - { 249, 0 }, - { 249, -4 }, - { 249, -2 }, + { 159, -1 }, /* (0) explain ::= EXPLAIN */ + { 159, -3 }, /* (1) explain ::= EXPLAIN QUERY PLAN */ + { 158, -1 }, /* (2) cmdx ::= cmd */ + { 160, -3 }, /* (3) cmd ::= BEGIN transtype trans_opt */ + { 161, 0 }, /* (4) transtype ::= */ + { 161, -1 }, /* (5) transtype ::= DEFERRED */ + { 161, -1 }, /* (6) transtype ::= IMMEDIATE */ + { 161, -1 }, /* (7) transtype ::= EXCLUSIVE */ + { 160, -2 }, /* (8) cmd ::= COMMIT|END trans_opt */ + { 160, -2 }, /* (9) cmd ::= ROLLBACK trans_opt */ + { 160, -2 }, /* (10) cmd ::= SAVEPOINT nm */ + { 160, -3 }, /* (11) cmd ::= RELEASE savepoint_opt nm */ + { 160, -5 }, /* (12) cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */ + { 165, -6 }, /* (13) create_table ::= createkw temp TABLE ifnotexists nm dbnm */ + { 167, -1 }, /* (14) createkw ::= CREATE */ + { 169, 0 }, /* (15) ifnotexists ::= */ + { 169, -3 }, /* (16) ifnotexists ::= IF NOT EXISTS */ + { 168, -1 }, /* (17) temp ::= TEMP */ + { 168, 0 }, /* (18) temp ::= */ + { 166, -5 }, /* (19) create_table_args ::= LP columnlist conslist_opt RP table_options */ + { 166, -2 }, /* (20) create_table_args ::= AS select */ + { 173, 0 }, /* (21) table_options ::= */ + { 173, -2 }, /* (22) table_options ::= WITHOUT nm */ + { 175, -2 }, /* (23) columnname ::= nm typetoken */ + { 177, 0 }, /* (24) typetoken ::= */ + { 177, -4 }, /* (25) typetoken ::= typename LP signed RP */ + { 177, -6 }, /* (26) typetoken ::= typename LP signed COMMA signed RP */ + { 178, -2 }, /* (27) typename ::= typename ID|STRING */ + { 182, 0 }, /* (28) scanpt ::= */ + { 183, -2 }, /* (29) ccons ::= CONSTRAINT nm */ + { 183, -4 }, /* (30) ccons ::= DEFAULT scanpt term scanpt */ + { 183, -4 }, /* (31) ccons ::= DEFAULT LP expr RP */ + { 183, -4 }, /* (32) ccons ::= DEFAULT PLUS term scanpt */ + { 183, -4 }, /* (33) ccons ::= DEFAULT MINUS term scanpt */ + { 183, -3 }, /* (34) ccons ::= DEFAULT scanpt ID|INDEXED */ + { 183, -3 }, /* (35) ccons ::= NOT NULL onconf */ + { 183, -5 }, /* (36) ccons ::= PRIMARY KEY sortorder onconf autoinc */ + { 183, -2 }, /* (37) ccons ::= UNIQUE onconf */ + { 183, -4 }, /* (38) ccons ::= CHECK LP expr RP */ + { 183, -4 }, /* (39) ccons ::= REFERENCES nm eidlist_opt refargs */ + { 183, -1 }, /* (40) ccons ::= defer_subclause */ + { 183, -2 }, /* (41) ccons ::= COLLATE ID|STRING */ + { 188, 0 }, /* (42) autoinc ::= */ + { 188, -1 }, /* (43) autoinc ::= AUTOINCR */ + { 190, 0 }, /* (44) refargs ::= */ + { 190, -2 }, /* (45) refargs ::= refargs refarg */ + { 192, -2 }, /* (46) refarg ::= MATCH nm */ + { 192, -3 }, /* (47) refarg ::= ON INSERT refact */ + { 192, -3 }, /* (48) refarg ::= ON DELETE refact */ + { 192, -3 }, /* (49) refarg ::= ON UPDATE refact */ + { 193, -2 }, /* (50) refact ::= SET NULL */ + { 193, -2 }, /* (51) refact ::= SET DEFAULT */ + { 193, -1 }, /* (52) refact ::= CASCADE */ + { 193, -1 }, /* (53) refact ::= RESTRICT */ + { 193, -2 }, /* (54) refact ::= NO ACTION */ + { 191, -3 }, /* (55) defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ + { 191, -2 }, /* (56) defer_subclause ::= DEFERRABLE init_deferred_pred_opt */ + { 194, 0 }, /* (57) init_deferred_pred_opt ::= */ + { 194, -2 }, /* (58) init_deferred_pred_opt ::= INITIALLY DEFERRED */ + { 194, -2 }, /* (59) init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ + { 172, 0 }, /* (60) conslist_opt ::= */ + { 196, -1 }, /* (61) tconscomma ::= COMMA */ + { 197, -2 }, /* (62) tcons ::= CONSTRAINT nm */ + { 197, -7 }, /* (63) tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */ + { 197, -5 }, /* (64) tcons ::= UNIQUE LP sortlist RP onconf */ + { 197, -5 }, /* (65) tcons ::= CHECK LP expr RP onconf */ + { 197, -10 }, /* (66) tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */ + { 200, 0 }, /* (67) defer_subclause_opt ::= */ + { 186, 0 }, /* (68) onconf ::= */ + { 186, -3 }, /* (69) onconf ::= ON CONFLICT resolvetype */ + { 201, 0 }, /* (70) orconf ::= */ + { 201, -2 }, /* (71) orconf ::= OR resolvetype */ + { 202, -1 }, /* (72) resolvetype ::= IGNORE */ + { 202, -1 }, /* (73) resolvetype ::= REPLACE */ + { 160, -4 }, /* (74) cmd ::= DROP TABLE ifexists fullname */ + { 204, -2 }, /* (75) ifexists ::= IF EXISTS */ + { 204, 0 }, /* (76) ifexists ::= */ + { 160, -9 }, /* (77) cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */ + { 160, -4 }, /* (78) cmd ::= DROP VIEW ifexists fullname */ + { 160, -1 }, /* (79) cmd ::= select */ + { 174, -3 }, /* (80) select ::= WITH wqlist selectnowith */ + { 174, -4 }, /* (81) select ::= WITH RECURSIVE wqlist selectnowith */ + { 174, -1 }, /* (82) select ::= selectnowith */ + { 206, -3 }, /* (83) selectnowith ::= selectnowith multiselect_op oneselect */ + { 209, -1 }, /* (84) multiselect_op ::= UNION */ + { 209, -2 }, /* (85) multiselect_op ::= UNION ALL */ + { 209, -1 }, /* (86) multiselect_op ::= EXCEPT|INTERSECT */ + { 207, -9 }, /* (87) oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ + { 207, -10 }, /* (88) oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt window_clause orderby_opt limit_opt */ + { 219, -4 }, /* (89) values ::= VALUES LP nexprlist RP */ + { 219, -5 }, /* (90) values ::= values COMMA LP nexprlist RP */ + { 210, -1 }, /* (91) distinct ::= DISTINCT */ + { 210, -1 }, /* (92) distinct ::= ALL */ + { 210, 0 }, /* (93) distinct ::= */ + { 221, 0 }, /* (94) sclp ::= */ + { 211, -5 }, /* (95) selcollist ::= sclp scanpt expr scanpt as */ + { 211, -3 }, /* (96) selcollist ::= sclp scanpt STAR */ + { 211, -5 }, /* (97) selcollist ::= sclp scanpt nm DOT STAR */ + { 222, -2 }, /* (98) as ::= AS nm */ + { 222, 0 }, /* (99) as ::= */ + { 212, 0 }, /* (100) from ::= */ + { 212, -2 }, /* (101) from ::= FROM seltablist */ + { 224, -2 }, /* (102) stl_prefix ::= seltablist joinop */ + { 224, 0 }, /* (103) stl_prefix ::= */ + { 223, -7 }, /* (104) seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ + { 223, -9 }, /* (105) seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */ + { 223, -7 }, /* (106) seltablist ::= stl_prefix LP select RP as on_opt using_opt */ + { 223, -7 }, /* (107) seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ + { 170, 0 }, /* (108) dbnm ::= */ + { 170, -2 }, /* (109) dbnm ::= DOT nm */ + { 205, -1 }, /* (110) fullname ::= nm */ + { 205, -3 }, /* (111) fullname ::= nm DOT nm */ + { 230, -1 }, /* (112) xfullname ::= nm */ + { 230, -3 }, /* (113) xfullname ::= nm DOT nm */ + { 230, -5 }, /* (114) xfullname ::= nm DOT nm AS nm */ + { 230, -3 }, /* (115) xfullname ::= nm AS nm */ + { 225, -1 }, /* (116) joinop ::= COMMA|JOIN */ + { 225, -2 }, /* (117) joinop ::= JOIN_KW JOIN */ + { 225, -3 }, /* (118) joinop ::= JOIN_KW nm JOIN */ + { 225, -4 }, /* (119) joinop ::= JOIN_KW nm nm JOIN */ + { 227, -2 }, /* (120) on_opt ::= ON expr */ + { 227, 0 }, /* (121) on_opt ::= */ + { 226, 0 }, /* (122) indexed_opt ::= */ + { 226, -3 }, /* (123) indexed_opt ::= INDEXED BY nm */ + { 226, -2 }, /* (124) indexed_opt ::= NOT INDEXED */ + { 228, -4 }, /* (125) using_opt ::= USING LP idlist RP */ + { 228, 0 }, /* (126) using_opt ::= */ + { 216, 0 }, /* (127) orderby_opt ::= */ + { 216, -3 }, /* (128) orderby_opt ::= ORDER BY sortlist */ + { 198, -4 }, /* (129) sortlist ::= sortlist COMMA expr sortorder */ + { 198, -2 }, /* (130) sortlist ::= expr sortorder */ + { 187, -1 }, /* (131) sortorder ::= ASC */ + { 187, -1 }, /* (132) sortorder ::= DESC */ + { 187, 0 }, /* (133) sortorder ::= */ + { 214, 0 }, /* (134) groupby_opt ::= */ + { 214, -3 }, /* (135) groupby_opt ::= GROUP BY nexprlist */ + { 215, 0 }, /* (136) having_opt ::= */ + { 215, -2 }, /* (137) having_opt ::= HAVING expr */ + { 217, 0 }, /* (138) limit_opt ::= */ + { 217, -2 }, /* (139) limit_opt ::= LIMIT expr */ + { 217, -4 }, /* (140) limit_opt ::= LIMIT expr OFFSET expr */ + { 217, -4 }, /* (141) limit_opt ::= LIMIT expr COMMA expr */ + { 160, -6 }, /* (142) cmd ::= with DELETE FROM xfullname indexed_opt where_opt */ + { 213, 0 }, /* (143) where_opt ::= */ + { 213, -2 }, /* (144) where_opt ::= WHERE expr */ + { 160, -8 }, /* (145) cmd ::= with UPDATE orconf xfullname indexed_opt SET setlist where_opt */ + { 233, -5 }, /* (146) setlist ::= setlist COMMA nm EQ expr */ + { 233, -7 }, /* (147) setlist ::= setlist COMMA LP idlist RP EQ expr */ + { 233, -3 }, /* (148) setlist ::= nm EQ expr */ + { 233, -5 }, /* (149) setlist ::= LP idlist RP EQ expr */ + { 160, -7 }, /* (150) cmd ::= with insert_cmd INTO xfullname idlist_opt select upsert */ + { 160, -7 }, /* (151) cmd ::= with insert_cmd INTO xfullname idlist_opt DEFAULT VALUES */ + { 236, 0 }, /* (152) upsert ::= */ + { 236, -11 }, /* (153) upsert ::= ON CONFLICT LP sortlist RP where_opt DO UPDATE SET setlist where_opt */ + { 236, -8 }, /* (154) upsert ::= ON CONFLICT LP sortlist RP where_opt DO NOTHING */ + { 236, -4 }, /* (155) upsert ::= ON CONFLICT DO NOTHING */ + { 234, -2 }, /* (156) insert_cmd ::= INSERT orconf */ + { 234, -1 }, /* (157) insert_cmd ::= REPLACE */ + { 235, 0 }, /* (158) idlist_opt ::= */ + { 235, -3 }, /* (159) idlist_opt ::= LP idlist RP */ + { 231, -3 }, /* (160) idlist ::= idlist COMMA nm */ + { 231, -1 }, /* (161) idlist ::= nm */ + { 185, -3 }, /* (162) expr ::= LP expr RP */ + { 185, -1 }, /* (163) expr ::= ID|INDEXED */ + { 185, -1 }, /* (164) expr ::= JOIN_KW */ + { 185, -3 }, /* (165) expr ::= nm DOT nm */ + { 185, -5 }, /* (166) expr ::= nm DOT nm DOT nm */ + { 184, -1 }, /* (167) term ::= NULL|FLOAT|BLOB */ + { 184, -1 }, /* (168) term ::= STRING */ + { 184, -1 }, /* (169) term ::= INTEGER */ + { 185, -1 }, /* (170) expr ::= VARIABLE */ + { 185, -3 }, /* (171) expr ::= expr COLLATE ID|STRING */ + { 185, -6 }, /* (172) expr ::= CAST LP expr AS typetoken RP */ + { 185, -5 }, /* (173) expr ::= ID|INDEXED LP distinct exprlist RP */ + { 185, -4 }, /* (174) expr ::= ID|INDEXED LP STAR RP */ + { 185, -6 }, /* (175) expr ::= ID|INDEXED LP distinct exprlist RP over_clause */ + { 185, -5 }, /* (176) expr ::= ID|INDEXED LP STAR RP over_clause */ + { 184, -1 }, /* (177) term ::= CTIME_KW */ + { 185, -5 }, /* (178) expr ::= LP nexprlist COMMA expr RP */ + { 185, -3 }, /* (179) expr ::= expr AND expr */ + { 185, -3 }, /* (180) expr ::= expr OR expr */ + { 185, -3 }, /* (181) expr ::= expr LT|GT|GE|LE expr */ + { 185, -3 }, /* (182) expr ::= expr EQ|NE expr */ + { 185, -3 }, /* (183) expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ + { 185, -3 }, /* (184) expr ::= expr PLUS|MINUS expr */ + { 185, -3 }, /* (185) expr ::= expr STAR|SLASH|REM expr */ + { 185, -3 }, /* (186) expr ::= expr CONCAT expr */ + { 238, -2 }, /* (187) likeop ::= NOT LIKE_KW|MATCH */ + { 185, -3 }, /* (188) expr ::= expr likeop expr */ + { 185, -5 }, /* (189) expr ::= expr likeop expr ESCAPE expr */ + { 185, -2 }, /* (190) expr ::= expr ISNULL|NOTNULL */ + { 185, -3 }, /* (191) expr ::= expr NOT NULL */ + { 185, -3 }, /* (192) expr ::= expr IS expr */ + { 185, -4 }, /* (193) expr ::= expr IS NOT expr */ + { 185, -2 }, /* (194) expr ::= NOT expr */ + { 185, -2 }, /* (195) expr ::= BITNOT expr */ + { 185, -2 }, /* (196) expr ::= PLUS|MINUS expr */ + { 239, -1 }, /* (197) between_op ::= BETWEEN */ + { 239, -2 }, /* (198) between_op ::= NOT BETWEEN */ + { 185, -5 }, /* (199) expr ::= expr between_op expr AND expr */ + { 240, -1 }, /* (200) in_op ::= IN */ + { 240, -2 }, /* (201) in_op ::= NOT IN */ + { 185, -5 }, /* (202) expr ::= expr in_op LP exprlist RP */ + { 185, -3 }, /* (203) expr ::= LP select RP */ + { 185, -5 }, /* (204) expr ::= expr in_op LP select RP */ + { 185, -5 }, /* (205) expr ::= expr in_op nm dbnm paren_exprlist */ + { 185, -4 }, /* (206) expr ::= EXISTS LP select RP */ + { 185, -5 }, /* (207) expr ::= CASE case_operand case_exprlist case_else END */ + { 243, -5 }, /* (208) case_exprlist ::= case_exprlist WHEN expr THEN expr */ + { 243, -4 }, /* (209) case_exprlist ::= WHEN expr THEN expr */ + { 244, -2 }, /* (210) case_else ::= ELSE expr */ + { 244, 0 }, /* (211) case_else ::= */ + { 242, -1 }, /* (212) case_operand ::= expr */ + { 242, 0 }, /* (213) case_operand ::= */ + { 229, 0 }, /* (214) exprlist ::= */ + { 220, -3 }, /* (215) nexprlist ::= nexprlist COMMA expr */ + { 220, -1 }, /* (216) nexprlist ::= expr */ + { 241, 0 }, /* (217) paren_exprlist ::= */ + { 241, -3 }, /* (218) paren_exprlist ::= LP exprlist RP */ + { 160, -12 }, /* (219) cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */ + { 245, -1 }, /* (220) uniqueflag ::= UNIQUE */ + { 245, 0 }, /* (221) uniqueflag ::= */ + { 189, 0 }, /* (222) eidlist_opt ::= */ + { 189, -3 }, /* (223) eidlist_opt ::= LP eidlist RP */ + { 199, -5 }, /* (224) eidlist ::= eidlist COMMA nm collate sortorder */ + { 199, -3 }, /* (225) eidlist ::= nm collate sortorder */ + { 246, 0 }, /* (226) collate ::= */ + { 246, -2 }, /* (227) collate ::= COLLATE ID|STRING */ + { 160, -4 }, /* (228) cmd ::= DROP INDEX ifexists fullname */ + { 160, -1 }, /* (229) cmd ::= VACUUM */ + { 160, -2 }, /* (230) cmd ::= VACUUM nm */ + { 160, -3 }, /* (231) cmd ::= PRAGMA nm dbnm */ + { 160, -5 }, /* (232) cmd ::= PRAGMA nm dbnm EQ nmnum */ + { 160, -6 }, /* (233) cmd ::= PRAGMA nm dbnm LP nmnum RP */ + { 160, -5 }, /* (234) cmd ::= PRAGMA nm dbnm EQ minus_num */ + { 160, -6 }, /* (235) cmd ::= PRAGMA nm dbnm LP minus_num RP */ + { 180, -2 }, /* (236) plus_num ::= PLUS INTEGER|FLOAT */ + { 181, -2 }, /* (237) minus_num ::= MINUS INTEGER|FLOAT */ + { 160, -5 }, /* (238) cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ + { 248, -11 }, /* (239) trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ + { 250, -1 }, /* (240) trigger_time ::= BEFORE|AFTER */ + { 250, -2 }, /* (241) trigger_time ::= INSTEAD OF */ + { 250, 0 }, /* (242) trigger_time ::= */ + { 251, -1 }, /* (243) trigger_event ::= DELETE|INSERT */ + { 251, -1 }, /* (244) trigger_event ::= UPDATE */ + { 251, -3 }, /* (245) trigger_event ::= UPDATE OF idlist */ + { 253, 0 }, /* (246) when_clause ::= */ + { 253, -2 }, /* (247) when_clause ::= WHEN expr */ + { 249, -3 }, /* (248) trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ + { 249, -2 }, /* (249) trigger_cmd_list ::= trigger_cmd SEMI */ + { 255, -3 }, /* (250) trnm ::= nm DOT nm */ + { 256, -3 }, /* (251) tridxby ::= INDEXED BY nm */ + { 256, -2 }, /* (252) tridxby ::= NOT INDEXED */ + { 254, -8 }, /* (253) trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt */ + { 254, -8 }, /* (254) trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select upsert scanpt */ + { 254, -6 }, /* (255) trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt */ + { 254, -3 }, /* (256) trigger_cmd ::= scanpt select scanpt */ + { 185, -4 }, /* (257) expr ::= RAISE LP IGNORE RP */ + { 185, -6 }, /* (258) expr ::= RAISE LP raisetype COMMA nm RP */ + { 203, -1 }, /* (259) raisetype ::= ROLLBACK */ + { 203, -1 }, /* (260) raisetype ::= ABORT */ + { 203, -1 }, /* (261) raisetype ::= FAIL */ + { 160, -4 }, /* (262) cmd ::= DROP TRIGGER ifexists fullname */ + { 160, -6 }, /* (263) cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ + { 160, -3 }, /* (264) cmd ::= DETACH database_kw_opt expr */ + { 258, 0 }, /* (265) key_opt ::= */ + { 258, -2 }, /* (266) key_opt ::= KEY expr */ + { 160, -1 }, /* (267) cmd ::= REINDEX */ + { 160, -3 }, /* (268) cmd ::= REINDEX nm dbnm */ + { 160, -1 }, /* (269) cmd ::= ANALYZE */ + { 160, -3 }, /* (270) cmd ::= ANALYZE nm dbnm */ + { 160, -6 }, /* (271) cmd ::= ALTER TABLE fullname RENAME TO nm */ + { 160, -7 }, /* (272) cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */ + { 259, -1 }, /* (273) add_column_fullname ::= fullname */ + { 160, -8 }, /* (274) cmd ::= ALTER TABLE fullname RENAME kwcolumn_opt nm TO nm */ + { 160, -1 }, /* (275) cmd ::= create_vtab */ + { 160, -4 }, /* (276) cmd ::= create_vtab LP vtabarglist RP */ + { 261, -8 }, /* (277) create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */ + { 263, 0 }, /* (278) vtabarg ::= */ + { 264, -1 }, /* (279) vtabargtoken ::= ANY */ + { 264, -3 }, /* (280) vtabargtoken ::= lp anylist RP */ + { 265, -1 }, /* (281) lp ::= LP */ + { 232, -2 }, /* (282) with ::= WITH wqlist */ + { 232, -3 }, /* (283) with ::= WITH RECURSIVE wqlist */ + { 208, -6 }, /* (284) wqlist ::= nm eidlist_opt AS LP select RP */ + { 208, -8 }, /* (285) wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */ + { 267, -1 }, /* (286) windowdefn_list ::= windowdefn */ + { 267, -3 }, /* (287) windowdefn_list ::= windowdefn_list COMMA windowdefn */ + { 268, -3 }, /* (288) windowdefn ::= nm AS window */ + { 269, -5 }, /* (289) window ::= LP part_opt orderby_opt frame_opt RP */ + { 271, -3 }, /* (290) part_opt ::= PARTITION BY nexprlist */ + { 271, 0 }, /* (291) part_opt ::= */ + { 270, 0 }, /* (292) frame_opt ::= */ + { 270, -2 }, /* (293) frame_opt ::= range_or_rows frame_bound_s */ + { 270, -5 }, /* (294) frame_opt ::= range_or_rows BETWEEN frame_bound_s AND frame_bound_e */ + { 273, -1 }, /* (295) range_or_rows ::= RANGE */ + { 273, -1 }, /* (296) range_or_rows ::= ROWS */ + { 275, -1 }, /* (297) frame_bound_s ::= frame_bound */ + { 275, -2 }, /* (298) frame_bound_s ::= UNBOUNDED PRECEDING */ + { 276, -1 }, /* (299) frame_bound_e ::= frame_bound */ + { 276, -2 }, /* (300) frame_bound_e ::= UNBOUNDED FOLLOWING */ + { 274, -2 }, /* (301) frame_bound ::= expr PRECEDING */ + { 274, -2 }, /* (302) frame_bound ::= CURRENT ROW */ + { 274, -2 }, /* (303) frame_bound ::= expr FOLLOWING */ + { 218, -2 }, /* (304) window_clause ::= WINDOW windowdefn_list */ + { 237, -3 }, /* (305) over_clause ::= filter_opt OVER window */ + { 237, -3 }, /* (306) over_clause ::= filter_opt OVER nm */ + { 272, 0 }, /* (307) filter_opt ::= */ + { 272, -5 }, /* (308) filter_opt ::= FILTER LP WHERE expr RP */ + { 155, -1 }, /* (309) input ::= cmdlist */ + { 156, -2 }, /* (310) cmdlist ::= cmdlist ecmd */ + { 156, -1 }, /* (311) cmdlist ::= ecmd */ + { 157, -1 }, /* (312) ecmd ::= SEMI */ + { 157, -2 }, /* (313) ecmd ::= cmdx SEMI */ + { 157, -2 }, /* (314) ecmd ::= explain cmdx */ + { 162, 0 }, /* (315) trans_opt ::= */ + { 162, -1 }, /* (316) trans_opt ::= TRANSACTION */ + { 162, -2 }, /* (317) trans_opt ::= TRANSACTION nm */ + { 164, -1 }, /* (318) savepoint_opt ::= SAVEPOINT */ + { 164, 0 }, /* (319) savepoint_opt ::= */ + { 160, -2 }, /* (320) cmd ::= create_table create_table_args */ + { 171, -4 }, /* (321) columnlist ::= columnlist COMMA columnname carglist */ + { 171, -2 }, /* (322) columnlist ::= columnname carglist */ + { 163, -1 }, /* (323) nm ::= ID|INDEXED */ + { 163, -1 }, /* (324) nm ::= STRING */ + { 163, -1 }, /* (325) nm ::= JOIN_KW */ + { 177, -1 }, /* (326) typetoken ::= typename */ + { 178, -1 }, /* (327) typename ::= ID|STRING */ + { 179, -1 }, /* (328) signed ::= plus_num */ + { 179, -1 }, /* (329) signed ::= minus_num */ + { 176, -2 }, /* (330) carglist ::= carglist ccons */ + { 176, 0 }, /* (331) carglist ::= */ + { 183, -2 }, /* (332) ccons ::= NULL onconf */ + { 172, -2 }, /* (333) conslist_opt ::= COMMA conslist */ + { 195, -3 }, /* (334) conslist ::= conslist tconscomma tcons */ + { 195, -1 }, /* (335) conslist ::= tcons */ + { 196, 0 }, /* (336) tconscomma ::= */ + { 200, -1 }, /* (337) defer_subclause_opt ::= defer_subclause */ + { 202, -1 }, /* (338) resolvetype ::= raisetype */ + { 206, -1 }, /* (339) selectnowith ::= oneselect */ + { 207, -1 }, /* (340) oneselect ::= values */ + { 221, -2 }, /* (341) sclp ::= selcollist COMMA */ + { 222, -1 }, /* (342) as ::= ID|STRING */ + { 185, -1 }, /* (343) expr ::= term */ + { 238, -1 }, /* (344) likeop ::= LIKE_KW|MATCH */ + { 229, -1 }, /* (345) exprlist ::= nexprlist */ + { 247, -1 }, /* (346) nmnum ::= plus_num */ + { 247, -1 }, /* (347) nmnum ::= nm */ + { 247, -1 }, /* (348) nmnum ::= ON */ + { 247, -1 }, /* (349) nmnum ::= DELETE */ + { 247, -1 }, /* (350) nmnum ::= DEFAULT */ + { 180, -1 }, /* (351) plus_num ::= INTEGER|FLOAT */ + { 252, 0 }, /* (352) foreach_clause ::= */ + { 252, -3 }, /* (353) foreach_clause ::= FOR EACH ROW */ + { 255, -1 }, /* (354) trnm ::= nm */ + { 256, 0 }, /* (355) tridxby ::= */ + { 257, -1 }, /* (356) database_kw_opt ::= DATABASE */ + { 257, 0 }, /* (357) database_kw_opt ::= */ + { 260, 0 }, /* (358) kwcolumn_opt ::= */ + { 260, -1 }, /* (359) kwcolumn_opt ::= COLUMNKW */ + { 262, -1 }, /* (360) vtabarglist ::= vtabarg */ + { 262, -3 }, /* (361) vtabarglist ::= vtabarglist COMMA vtabarg */ + { 263, -2 }, /* (362) vtabarg ::= vtabarg vtabargtoken */ + { 266, 0 }, /* (363) anylist ::= */ + { 266, -4 }, /* (364) anylist ::= anylist LP anylist RP */ + { 266, -2 }, /* (365) anylist ::= anylist ANY */ + { 232, 0 }, /* (366) with ::= */ }; static void yy_accept(yyParser*); /* Forward Declaration */ @@ -138746,22 +149459,39 @@ /* ** Perform a reduce action and the shift that must immediately ** follow the reduce. +** +** The yyLookahead and yyLookaheadToken parameters provide reduce actions +** access to the lookahead token (if any). The yyLookahead will be YYNOCODE +** if the lookahead token has already been consumed. As this procedure is +** only called from one place, optimizing compilers will in-line it, which +** means that the extra parameters have no performance impact. */ -static void yy_reduce( +static YYACTIONTYPE yy_reduce( yyParser *yypParser, /* The parser */ - unsigned int yyruleno /* Number of the rule by which to reduce */ + unsigned int yyruleno, /* Number of the rule by which to reduce */ + int yyLookahead, /* Lookahead token, or YYNOCODE if none */ + sqlite3ParserTOKENTYPE yyLookaheadToken /* Value of the lookahead token */ + sqlite3ParserCTX_PDECL /* %extra_context */ ){ int yygoto; /* The next state */ - int yyact; /* The next action */ + YYACTIONTYPE yyact; /* The next action */ yyStackEntry *yymsp; /* The top of the parser's stack */ int yysize; /* Amount to pop the stack */ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + (void)yyLookahead; + (void)yyLookaheadToken; yymsp = yypParser->yytos; #ifndef NDEBUG if( yyTraceFILE && yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) ){ yysize = yyRuleInfo[yyruleno].nrhs; - fprintf(yyTraceFILE, "%sReduce [%s], go to state %d.\n", yyTracePrompt, - yyRuleName[yyruleno], yymsp[yysize].stateno); + if( yysize ){ + fprintf(yyTraceFILE, "%sReduce %d [%s], go to state %d.\n", + yyTracePrompt, + yyruleno, yyRuleName[yyruleno], yymsp[yysize].stateno); + }else{ + fprintf(yyTraceFILE, "%sReduce %d [%s].\n", + yyTracePrompt, yyruleno, yyRuleName[yyruleno]); + } } #endif /* NDEBUG */ @@ -138778,13 +149508,19 @@ #if YYSTACKDEPTH>0 if( yypParser->yytos>=yypParser->yystackEnd ){ yyStackOverflow(yypParser); - return; + /* The call to yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } #else if( yypParser->yytos>=&yypParser->yystack[yypParser->yystksz-1] ){ if( yyGrowStack(yypParser) ){ yyStackOverflow(yypParser); - return; + /* The call to yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } yymsp = yypParser->yytos; } @@ -138812,15 +149548,15 @@ { sqlite3FinishCoding(pParse); } break; case 3: /* cmd ::= BEGIN transtype trans_opt */ -{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy194);} +{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy70);} break; case 4: /* transtype ::= */ -{yymsp[1].minor.yy194 = TK_DEFERRED;} +{yymsp[1].minor.yy70 = TK_DEFERRED;} break; case 5: /* transtype ::= DEFERRED */ case 6: /* transtype ::= IMMEDIATE */ yytestcase(yyruleno==6); case 7: /* transtype ::= EXCLUSIVE */ yytestcase(yyruleno==7); -{yymsp[0].minor.yy194 = yymsp[0].major; /*A-overwrites-X*/} +{yymsp[0].minor.yy70 = yymsp[0].major; /*A-overwrites-X*/} break; case 8: /* cmd ::= COMMIT|END trans_opt */ case 9: /* cmd ::= ROLLBACK trans_opt */ yytestcase(yyruleno==9); @@ -138843,7 +149579,7 @@ break; case 13: /* create_table ::= createkw temp TABLE ifnotexists nm dbnm */ { - sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy194,0,0,yymsp[-2].minor.yy194); + sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy70,0,0,yymsp[-2].minor.yy70); } break; case 14: /* createkw ::= CREATE */ @@ -138852,38 +149588,38 @@ case 15: /* ifnotexists ::= */ case 18: /* temp ::= */ yytestcase(yyruleno==18); case 21: /* table_options ::= */ yytestcase(yyruleno==21); - case 41: /* autoinc ::= */ yytestcase(yyruleno==41); - case 56: /* init_deferred_pred_opt ::= */ yytestcase(yyruleno==56); - case 66: /* defer_subclause_opt ::= */ yytestcase(yyruleno==66); - case 75: /* ifexists ::= */ yytestcase(yyruleno==75); - case 89: /* distinct ::= */ yytestcase(yyruleno==89); - case 212: /* collate ::= */ yytestcase(yyruleno==212); -{yymsp[1].minor.yy194 = 0;} + case 42: /* autoinc ::= */ yytestcase(yyruleno==42); + case 57: /* init_deferred_pred_opt ::= */ yytestcase(yyruleno==57); + case 67: /* defer_subclause_opt ::= */ yytestcase(yyruleno==67); + case 76: /* ifexists ::= */ yytestcase(yyruleno==76); + case 93: /* distinct ::= */ yytestcase(yyruleno==93); + case 226: /* collate ::= */ yytestcase(yyruleno==226); +{yymsp[1].minor.yy70 = 0;} break; case 16: /* ifnotexists ::= IF NOT EXISTS */ -{yymsp[-2].minor.yy194 = 1;} +{yymsp[-2].minor.yy70 = 1;} break; case 17: /* temp ::= TEMP */ - case 42: /* autoinc ::= AUTOINCR */ yytestcase(yyruleno==42); -{yymsp[0].minor.yy194 = 1;} + case 43: /* autoinc ::= AUTOINCR */ yytestcase(yyruleno==43); +{yymsp[0].minor.yy70 = 1;} break; case 19: /* create_table_args ::= LP columnlist conslist_opt RP table_options */ { - sqlite3EndTable(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,yymsp[0].minor.yy194,0); + sqlite3EndTable(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,yymsp[0].minor.yy70,0); } break; case 20: /* create_table_args ::= AS select */ { - sqlite3EndTable(pParse,0,0,0,yymsp[0].minor.yy243); - sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy243); + sqlite3EndTable(pParse,0,0,0,yymsp[0].minor.yy489); + sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy489); } break; case 22: /* table_options ::= WITHOUT nm */ { if( yymsp[0].minor.yy0.n==5 && sqlite3_strnicmp(yymsp[0].minor.yy0.z,"rowid",5)==0 ){ - yymsp[-1].minor.yy194 = TF_WithoutRowid | TF_NoVisibleRowid; + yymsp[-1].minor.yy70 = TF_WithoutRowid | TF_NoVisibleRowid; }else{ - yymsp[-1].minor.yy194 = 0; + yymsp[-1].minor.yy70 = 0; sqlite3ErrorMsg(pParse, "unknown table option: %.*s", yymsp[0].minor.yy0.n, yymsp[0].minor.yy0.z); } } @@ -138892,8 +149628,8 @@ {sqlite3AddColumn(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);} break; case 24: /* typetoken ::= */ - case 59: /* conslist_opt ::= */ yytestcase(yyruleno==59); - case 95: /* as ::= */ yytestcase(yyruleno==95); + case 60: /* conslist_opt ::= */ yytestcase(yyruleno==60); + case 99: /* as ::= */ yytestcase(yyruleno==99); {yymsp[1].minor.yy0.n = 0; yymsp[1].minor.yy0.z = 0;} break; case 25: /* typetoken ::= typename LP signed RP */ @@ -138909,177 +149645,206 @@ case 27: /* typename ::= typename ID|STRING */ {yymsp[-1].minor.yy0.n=yymsp[0].minor.yy0.n+(int)(yymsp[0].minor.yy0.z-yymsp[-1].minor.yy0.z);} break; - case 28: /* ccons ::= CONSTRAINT nm */ - case 61: /* tcons ::= CONSTRAINT nm */ yytestcase(yyruleno==61); + case 28: /* scanpt ::= */ +{ + assert( yyLookahead!=YYNOCODE ); + yymsp[1].minor.yy392 = yyLookaheadToken.z; +} + break; + case 29: /* ccons ::= CONSTRAINT nm */ + case 62: /* tcons ::= CONSTRAINT nm */ yytestcase(yyruleno==62); {pParse->constraintName = yymsp[0].minor.yy0;} break; - case 29: /* ccons ::= DEFAULT term */ - case 31: /* ccons ::= DEFAULT PLUS term */ yytestcase(yyruleno==31); -{sqlite3AddDefaultValue(pParse,&yymsp[0].minor.yy190);} + case 30: /* ccons ::= DEFAULT scanpt term scanpt */ +{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy18,yymsp[-2].minor.yy392,yymsp[0].minor.yy392);} break; - case 30: /* ccons ::= DEFAULT LP expr RP */ -{sqlite3AddDefaultValue(pParse,&yymsp[-1].minor.yy190);} + case 31: /* ccons ::= DEFAULT LP expr RP */ +{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy18,yymsp[-2].minor.yy0.z+1,yymsp[0].minor.yy0.z);} break; - case 32: /* ccons ::= DEFAULT MINUS term */ + case 32: /* ccons ::= DEFAULT PLUS term scanpt */ +{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy18,yymsp[-2].minor.yy0.z,yymsp[0].minor.yy392);} + break; + case 33: /* ccons ::= DEFAULT MINUS term scanpt */ { - ExprSpan v; - v.pExpr = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy190.pExpr, 0); - v.zStart = yymsp[-1].minor.yy0.z; - v.zEnd = yymsp[0].minor.yy190.zEnd; - sqlite3AddDefaultValue(pParse,&v); + Expr *p = sqlite3PExpr(pParse, TK_UMINUS, yymsp[-1].minor.yy18, 0); + sqlite3AddDefaultValue(pParse,p,yymsp[-2].minor.yy0.z,yymsp[0].minor.yy392); } break; - case 33: /* ccons ::= DEFAULT ID|INDEXED */ + case 34: /* ccons ::= DEFAULT scanpt ID|INDEXED */ { - ExprSpan v; - spanExpr(&v, pParse, TK_STRING, yymsp[0].minor.yy0); - sqlite3AddDefaultValue(pParse,&v); + Expr *p = tokenExpr(pParse, TK_STRING, yymsp[0].minor.yy0); + if( p ){ + sqlite3ExprIdToTrueFalse(p); + testcase( p->op==TK_TRUEFALSE && sqlite3ExprTruthValue(p) ); + } + sqlite3AddDefaultValue(pParse,p,yymsp[0].minor.yy0.z,yymsp[0].minor.yy0.z+yymsp[0].minor.yy0.n); } break; - case 34: /* ccons ::= NOT NULL onconf */ -{sqlite3AddNotNull(pParse, yymsp[0].minor.yy194);} + case 35: /* ccons ::= NOT NULL onconf */ +{sqlite3AddNotNull(pParse, yymsp[0].minor.yy70);} break; - case 35: /* ccons ::= PRIMARY KEY sortorder onconf autoinc */ -{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy194,yymsp[0].minor.yy194,yymsp[-2].minor.yy194);} + case 36: /* ccons ::= PRIMARY KEY sortorder onconf autoinc */ +{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy70,yymsp[0].minor.yy70,yymsp[-2].minor.yy70);} break; - case 36: /* ccons ::= UNIQUE onconf */ -{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy194,0,0,0,0, + case 37: /* ccons ::= UNIQUE onconf */ +{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy70,0,0,0,0, SQLITE_IDXTYPE_UNIQUE);} break; - case 37: /* ccons ::= CHECK LP expr RP */ -{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy190.pExpr);} + case 38: /* ccons ::= CHECK LP expr RP */ +{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy18);} break; - case 38: /* ccons ::= REFERENCES nm eidlist_opt refargs */ -{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy148,yymsp[0].minor.yy194);} + case 39: /* ccons ::= REFERENCES nm eidlist_opt refargs */ +{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy420,yymsp[0].minor.yy70);} break; - case 39: /* ccons ::= defer_subclause */ -{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy194);} + case 40: /* ccons ::= defer_subclause */ +{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy70);} break; - case 40: /* ccons ::= COLLATE ID|STRING */ + case 41: /* ccons ::= COLLATE ID|STRING */ {sqlite3AddCollateType(pParse, &yymsp[0].minor.yy0);} break; - case 43: /* refargs ::= */ -{ yymsp[1].minor.yy194 = OE_None*0x0101; /* EV: R-19803-45884 */} + case 44: /* refargs ::= */ +{ yymsp[1].minor.yy70 = OE_None*0x0101; /* EV: R-19803-45884 */} break; - case 44: /* refargs ::= refargs refarg */ -{ yymsp[-1].minor.yy194 = (yymsp[-1].minor.yy194 & ~yymsp[0].minor.yy497.mask) | yymsp[0].minor.yy497.value; } + case 45: /* refargs ::= refargs refarg */ +{ yymsp[-1].minor.yy70 = (yymsp[-1].minor.yy70 & ~yymsp[0].minor.yy111.mask) | yymsp[0].minor.yy111.value; } break; - case 45: /* refarg ::= MATCH nm */ -{ yymsp[-1].minor.yy497.value = 0; yymsp[-1].minor.yy497.mask = 0x000000; } + case 46: /* refarg ::= MATCH nm */ +{ yymsp[-1].minor.yy111.value = 0; yymsp[-1].minor.yy111.mask = 0x000000; } break; - case 46: /* refarg ::= ON INSERT refact */ -{ yymsp[-2].minor.yy497.value = 0; yymsp[-2].minor.yy497.mask = 0x000000; } + case 47: /* refarg ::= ON INSERT refact */ +{ yymsp[-2].minor.yy111.value = 0; yymsp[-2].minor.yy111.mask = 0x000000; } break; - case 47: /* refarg ::= ON DELETE refact */ -{ yymsp[-2].minor.yy497.value = yymsp[0].minor.yy194; yymsp[-2].minor.yy497.mask = 0x0000ff; } + case 48: /* refarg ::= ON DELETE refact */ +{ yymsp[-2].minor.yy111.value = yymsp[0].minor.yy70; yymsp[-2].minor.yy111.mask = 0x0000ff; } break; - case 48: /* refarg ::= ON UPDATE refact */ -{ yymsp[-2].minor.yy497.value = yymsp[0].minor.yy194<<8; yymsp[-2].minor.yy497.mask = 0x00ff00; } + case 49: /* refarg ::= ON UPDATE refact */ +{ yymsp[-2].minor.yy111.value = yymsp[0].minor.yy70<<8; yymsp[-2].minor.yy111.mask = 0x00ff00; } break; - case 49: /* refact ::= SET NULL */ -{ yymsp[-1].minor.yy194 = OE_SetNull; /* EV: R-33326-45252 */} + case 50: /* refact ::= SET NULL */ +{ yymsp[-1].minor.yy70 = OE_SetNull; /* EV: R-33326-45252 */} break; - case 50: /* refact ::= SET DEFAULT */ -{ yymsp[-1].minor.yy194 = OE_SetDflt; /* EV: R-33326-45252 */} + case 51: /* refact ::= SET DEFAULT */ +{ yymsp[-1].minor.yy70 = OE_SetDflt; /* EV: R-33326-45252 */} break; - case 51: /* refact ::= CASCADE */ -{ yymsp[0].minor.yy194 = OE_Cascade; /* EV: R-33326-45252 */} + case 52: /* refact ::= CASCADE */ +{ yymsp[0].minor.yy70 = OE_Cascade; /* EV: R-33326-45252 */} break; - case 52: /* refact ::= RESTRICT */ -{ yymsp[0].minor.yy194 = OE_Restrict; /* EV: R-33326-45252 */} + case 53: /* refact ::= RESTRICT */ +{ yymsp[0].minor.yy70 = OE_Restrict; /* EV: R-33326-45252 */} break; - case 53: /* refact ::= NO ACTION */ -{ yymsp[-1].minor.yy194 = OE_None; /* EV: R-33326-45252 */} + case 54: /* refact ::= NO ACTION */ +{ yymsp[-1].minor.yy70 = OE_None; /* EV: R-33326-45252 */} break; - case 54: /* defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ -{yymsp[-2].minor.yy194 = 0;} + case 55: /* defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ +{yymsp[-2].minor.yy70 = 0;} break; - case 55: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */ - case 70: /* orconf ::= OR resolvetype */ yytestcase(yyruleno==70); - case 143: /* insert_cmd ::= INSERT orconf */ yytestcase(yyruleno==143); -{yymsp[-1].minor.yy194 = yymsp[0].minor.yy194;} + case 56: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */ + case 71: /* orconf ::= OR resolvetype */ yytestcase(yyruleno==71); + case 156: /* insert_cmd ::= INSERT orconf */ yytestcase(yyruleno==156); +{yymsp[-1].minor.yy70 = yymsp[0].minor.yy70;} break; - case 57: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */ - case 74: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==74); - case 184: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==184); - case 187: /* in_op ::= NOT IN */ yytestcase(yyruleno==187); - case 213: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==213); -{yymsp[-1].minor.yy194 = 1;} + case 58: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */ + case 75: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==75); + case 198: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==198); + case 201: /* in_op ::= NOT IN */ yytestcase(yyruleno==201); + case 227: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==227); +{yymsp[-1].minor.yy70 = 1;} break; - case 58: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ -{yymsp[-1].minor.yy194 = 0;} + case 59: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ +{yymsp[-1].minor.yy70 = 0;} break; - case 60: /* tconscomma ::= COMMA */ + case 61: /* tconscomma ::= COMMA */ {pParse->constraintName.n = 0;} break; - case 62: /* tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */ -{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy148,yymsp[0].minor.yy194,yymsp[-2].minor.yy194,0);} + case 63: /* tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */ +{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy420,yymsp[0].minor.yy70,yymsp[-2].minor.yy70,0);} break; - case 63: /* tcons ::= UNIQUE LP sortlist RP onconf */ -{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy148,yymsp[0].minor.yy194,0,0,0,0, + case 64: /* tcons ::= UNIQUE LP sortlist RP onconf */ +{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy420,yymsp[0].minor.yy70,0,0,0,0, SQLITE_IDXTYPE_UNIQUE);} break; - case 64: /* tcons ::= CHECK LP expr RP onconf */ -{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy190.pExpr);} + case 65: /* tcons ::= CHECK LP expr RP onconf */ +{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy18);} break; - case 65: /* tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */ + case 66: /* tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */ { - sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy148, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy148, yymsp[-1].minor.yy194); - sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy194); + sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy420, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy420, yymsp[-1].minor.yy70); + sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy70); } break; - case 67: /* onconf ::= */ - case 69: /* orconf ::= */ yytestcase(yyruleno==69); -{yymsp[1].minor.yy194 = OE_Default;} + case 68: /* onconf ::= */ + case 70: /* orconf ::= */ yytestcase(yyruleno==70); +{yymsp[1].minor.yy70 = OE_Default;} break; - case 68: /* onconf ::= ON CONFLICT resolvetype */ -{yymsp[-2].minor.yy194 = yymsp[0].minor.yy194;} + case 69: /* onconf ::= ON CONFLICT resolvetype */ +{yymsp[-2].minor.yy70 = yymsp[0].minor.yy70;} break; - case 71: /* resolvetype ::= IGNORE */ -{yymsp[0].minor.yy194 = OE_Ignore;} + case 72: /* resolvetype ::= IGNORE */ +{yymsp[0].minor.yy70 = OE_Ignore;} break; - case 72: /* resolvetype ::= REPLACE */ - case 144: /* insert_cmd ::= REPLACE */ yytestcase(yyruleno==144); -{yymsp[0].minor.yy194 = OE_Replace;} + case 73: /* resolvetype ::= REPLACE */ + case 157: /* insert_cmd ::= REPLACE */ yytestcase(yyruleno==157); +{yymsp[0].minor.yy70 = OE_Replace;} break; - case 73: /* cmd ::= DROP TABLE ifexists fullname */ + case 74: /* cmd ::= DROP TABLE ifexists fullname */ { - sqlite3DropTable(pParse, yymsp[0].minor.yy185, 0, yymsp[-1].minor.yy194); + sqlite3DropTable(pParse, yymsp[0].minor.yy135, 0, yymsp[-1].minor.yy70); } break; - case 76: /* cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */ + case 77: /* cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */ { - sqlite3CreateView(pParse, &yymsp[-8].minor.yy0, &yymsp[-4].minor.yy0, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy148, yymsp[0].minor.yy243, yymsp[-7].minor.yy194, yymsp[-5].minor.yy194); + sqlite3CreateView(pParse, &yymsp[-8].minor.yy0, &yymsp[-4].minor.yy0, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy420, yymsp[0].minor.yy489, yymsp[-7].minor.yy70, yymsp[-5].minor.yy70); } break; - case 77: /* cmd ::= DROP VIEW ifexists fullname */ + case 78: /* cmd ::= DROP VIEW ifexists fullname */ { - sqlite3DropTable(pParse, yymsp[0].minor.yy185, 1, yymsp[-1].minor.yy194); + sqlite3DropTable(pParse, yymsp[0].minor.yy135, 1, yymsp[-1].minor.yy70); } break; - case 78: /* cmd ::= select */ + case 79: /* cmd ::= select */ { SelectDest dest = {SRT_Output, 0, 0, 0, 0, 0}; - sqlite3Select(pParse, yymsp[0].minor.yy243, &dest); - sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy243); + sqlite3Select(pParse, yymsp[0].minor.yy489, &dest); + sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy489); } break; - case 79: /* select ::= with selectnowith */ + case 80: /* select ::= WITH wqlist selectnowith */ { - Select *p = yymsp[0].minor.yy243; + Select *p = yymsp[0].minor.yy489; if( p ){ - p->pWith = yymsp[-1].minor.yy285; + p->pWith = yymsp[-1].minor.yy449; parserDoubleLinkSelect(pParse, p); }else{ - sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy285); + sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy449); } - yymsp[-1].minor.yy243 = p; /*A-overwrites-W*/ + yymsp[-2].minor.yy489 = p; } break; - case 80: /* selectnowith ::= selectnowith multiselect_op oneselect */ + case 81: /* select ::= WITH RECURSIVE wqlist selectnowith */ { - Select *pRhs = yymsp[0].minor.yy243; - Select *pLhs = yymsp[-2].minor.yy243; + Select *p = yymsp[0].minor.yy489; + if( p ){ + p->pWith = yymsp[-1].minor.yy449; + parserDoubleLinkSelect(pParse, p); + }else{ + sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy449); + } + yymsp[-3].minor.yy489 = p; +} + break; + case 82: /* select ::= selectnowith */ +{ + Select *p = yymsp[0].minor.yy489; + if( p ){ + parserDoubleLinkSelect(pParse, p); + } + yymsp[0].minor.yy489 = p; /*A-overwrites-X*/ +} + break; + case 83: /* selectnowith ::= selectnowith multiselect_op oneselect */ +{ + Select *pRhs = yymsp[0].minor.yy489; + Select *pLhs = yymsp[-2].minor.yy489; if( pRhs && pRhs->pPrior ){ SrcList *pFrom; Token x; @@ -139086,162 +149851,145 @@ x.n = 0; parserDoubleLinkSelect(pParse, pRhs); pFrom = sqlite3SrcListAppendFromTerm(pParse,0,0,0,&x,pRhs,0,0); - pRhs = sqlite3SelectNew(pParse,0,pFrom,0,0,0,0,0,0,0); + pRhs = sqlite3SelectNew(pParse,0,pFrom,0,0,0,0,0,0); } if( pRhs ){ - pRhs->op = (u8)yymsp[-1].minor.yy194; + pRhs->op = (u8)yymsp[-1].minor.yy70; pRhs->pPrior = pLhs; if( ALWAYS(pLhs) ) pLhs->selFlags &= ~SF_MultiValue; pRhs->selFlags &= ~SF_MultiValue; - if( yymsp[-1].minor.yy194!=TK_ALL ) pParse->hasCompound = 1; + if( yymsp[-1].minor.yy70!=TK_ALL ) pParse->hasCompound = 1; }else{ sqlite3SelectDelete(pParse->db, pLhs); } - yymsp[-2].minor.yy243 = pRhs; + yymsp[-2].minor.yy489 = pRhs; } break; - case 81: /* multiselect_op ::= UNION */ - case 83: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==83); -{yymsp[0].minor.yy194 = yymsp[0].major; /*A-overwrites-OP*/} + case 84: /* multiselect_op ::= UNION */ + case 86: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==86); +{yymsp[0].minor.yy70 = yymsp[0].major; /*A-overwrites-OP*/} break; - case 82: /* multiselect_op ::= UNION ALL */ -{yymsp[-1].minor.yy194 = TK_ALL;} + case 85: /* multiselect_op ::= UNION ALL */ +{yymsp[-1].minor.yy70 = TK_ALL;} break; - case 84: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ + case 87: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ { -#if SELECTTRACE_ENABLED - Token s = yymsp[-8].minor.yy0; /*A-overwrites-S*/ -#endif - yymsp[-8].minor.yy243 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy148,yymsp[-5].minor.yy185,yymsp[-4].minor.yy72,yymsp[-3].minor.yy148,yymsp[-2].minor.yy72,yymsp[-1].minor.yy148,yymsp[-7].minor.yy194,yymsp[0].minor.yy354.pLimit,yymsp[0].minor.yy354.pOffset); -#if SELECTTRACE_ENABLED - /* Populate the Select.zSelName[] string that is used to help with - ** query planner debugging, to differentiate between multiple Select - ** objects in a complex query. - ** - ** If the SELECT keyword is immediately followed by a C-style comment - ** then extract the first few alphanumeric characters from within that - ** comment to be the zSelName value. Otherwise, the label is #N where - ** is an integer that is incremented with each SELECT statement seen. - */ - if( yymsp[-8].minor.yy243!=0 ){ - const char *z = s.z+6; - int i; - sqlite3_snprintf(sizeof(yymsp[-8].minor.yy243->zSelName), yymsp[-8].minor.yy243->zSelName, "#%d", - ++pParse->nSelect); - while( z[0]==' ' ) z++; - if( z[0]=='/' && z[1]=='*' ){ - z += 2; - while( z[0]==' ' ) z++; - for(i=0; sqlite3Isalnum(z[i]); i++){} - sqlite3_snprintf(sizeof(yymsp[-8].minor.yy243->zSelName), yymsp[-8].minor.yy243->zSelName, "%.*s", i, z); - } + yymsp[-8].minor.yy489 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy420,yymsp[-5].minor.yy135,yymsp[-4].minor.yy18,yymsp[-3].minor.yy420,yymsp[-2].minor.yy18,yymsp[-1].minor.yy420,yymsp[-7].minor.yy70,yymsp[0].minor.yy18); +} + break; + case 88: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt window_clause orderby_opt limit_opt */ +{ + yymsp[-9].minor.yy489 = sqlite3SelectNew(pParse,yymsp[-7].minor.yy420,yymsp[-6].minor.yy135,yymsp[-5].minor.yy18,yymsp[-4].minor.yy420,yymsp[-3].minor.yy18,yymsp[-1].minor.yy420,yymsp[-8].minor.yy70,yymsp[0].minor.yy18); + if( yymsp[-9].minor.yy489 ){ + yymsp[-9].minor.yy489->pWinDefn = yymsp[-2].minor.yy327; + }else{ + sqlite3WindowListDelete(pParse->db, yymsp[-2].minor.yy327); } -#endif /* SELECTRACE_ENABLED */ } break; - case 85: /* values ::= VALUES LP nexprlist RP */ + case 89: /* values ::= VALUES LP nexprlist RP */ { - yymsp[-3].minor.yy243 = sqlite3SelectNew(pParse,yymsp[-1].minor.yy148,0,0,0,0,0,SF_Values,0,0); + yymsp[-3].minor.yy489 = sqlite3SelectNew(pParse,yymsp[-1].minor.yy420,0,0,0,0,0,SF_Values,0); } break; - case 86: /* values ::= values COMMA LP exprlist RP */ + case 90: /* values ::= values COMMA LP nexprlist RP */ { - Select *pRight, *pLeft = yymsp[-4].minor.yy243; - pRight = sqlite3SelectNew(pParse,yymsp[-1].minor.yy148,0,0,0,0,0,SF_Values|SF_MultiValue,0,0); + Select *pRight, *pLeft = yymsp[-4].minor.yy489; + pRight = sqlite3SelectNew(pParse,yymsp[-1].minor.yy420,0,0,0,0,0,SF_Values|SF_MultiValue,0); if( ALWAYS(pLeft) ) pLeft->selFlags &= ~SF_MultiValue; if( pRight ){ pRight->op = TK_ALL; pRight->pPrior = pLeft; - yymsp[-4].minor.yy243 = pRight; + yymsp[-4].minor.yy489 = pRight; }else{ - yymsp[-4].minor.yy243 = pLeft; + yymsp[-4].minor.yy489 = pLeft; } } break; - case 87: /* distinct ::= DISTINCT */ -{yymsp[0].minor.yy194 = SF_Distinct;} + case 91: /* distinct ::= DISTINCT */ +{yymsp[0].minor.yy70 = SF_Distinct;} break; - case 88: /* distinct ::= ALL */ -{yymsp[0].minor.yy194 = SF_All;} + case 92: /* distinct ::= ALL */ +{yymsp[0].minor.yy70 = SF_All;} break; - case 90: /* sclp ::= */ - case 118: /* orderby_opt ::= */ yytestcase(yyruleno==118); - case 125: /* groupby_opt ::= */ yytestcase(yyruleno==125); - case 200: /* exprlist ::= */ yytestcase(yyruleno==200); - case 203: /* paren_exprlist ::= */ yytestcase(yyruleno==203); - case 208: /* eidlist_opt ::= */ yytestcase(yyruleno==208); -{yymsp[1].minor.yy148 = 0;} + case 94: /* sclp ::= */ + case 127: /* orderby_opt ::= */ yytestcase(yyruleno==127); + case 134: /* groupby_opt ::= */ yytestcase(yyruleno==134); + case 214: /* exprlist ::= */ yytestcase(yyruleno==214); + case 217: /* paren_exprlist ::= */ yytestcase(yyruleno==217); + case 222: /* eidlist_opt ::= */ yytestcase(yyruleno==222); +{yymsp[1].minor.yy420 = 0;} break; - case 91: /* selcollist ::= sclp expr as */ + case 95: /* selcollist ::= sclp scanpt expr scanpt as */ { - yymsp[-2].minor.yy148 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy148, yymsp[-1].minor.yy190.pExpr); - if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yymsp[-2].minor.yy148, &yymsp[0].minor.yy0, 1); - sqlite3ExprListSetSpan(pParse,yymsp[-2].minor.yy148,&yymsp[-1].minor.yy190); + yymsp[-4].minor.yy420 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy420, yymsp[-2].minor.yy18); + if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy420, &yymsp[0].minor.yy0, 1); + sqlite3ExprListSetSpan(pParse,yymsp[-4].minor.yy420,yymsp[-3].minor.yy392,yymsp[-1].minor.yy392); } break; - case 92: /* selcollist ::= sclp STAR */ + case 96: /* selcollist ::= sclp scanpt STAR */ { Expr *p = sqlite3Expr(pParse->db, TK_ASTERISK, 0); - yymsp[-1].minor.yy148 = sqlite3ExprListAppend(pParse, yymsp[-1].minor.yy148, p); + yymsp[-2].minor.yy420 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy420, p); } break; - case 93: /* selcollist ::= sclp nm DOT STAR */ + case 97: /* selcollist ::= sclp scanpt nm DOT STAR */ { Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0); Expr *pLeft = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight); - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148, pDot); + yymsp[-4].minor.yy420 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy420, pDot); } break; - case 94: /* as ::= AS nm */ - case 105: /* dbnm ::= DOT nm */ yytestcase(yyruleno==105); - case 222: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==222); - case 223: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==223); + case 98: /* as ::= AS nm */ + case 109: /* dbnm ::= DOT nm */ yytestcase(yyruleno==109); + case 236: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==236); + case 237: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==237); {yymsp[-1].minor.yy0 = yymsp[0].minor.yy0;} break; - case 96: /* from ::= */ -{yymsp[1].minor.yy185 = sqlite3DbMallocZero(pParse->db, sizeof(*yymsp[1].minor.yy185));} + case 100: /* from ::= */ +{yymsp[1].minor.yy135 = sqlite3DbMallocZero(pParse->db, sizeof(*yymsp[1].minor.yy135));} break; - case 97: /* from ::= FROM seltablist */ + case 101: /* from ::= FROM seltablist */ { - yymsp[-1].minor.yy185 = yymsp[0].minor.yy185; - sqlite3SrcListShiftJoinType(yymsp[-1].minor.yy185); + yymsp[-1].minor.yy135 = yymsp[0].minor.yy135; + sqlite3SrcListShiftJoinType(yymsp[-1].minor.yy135); } break; - case 98: /* stl_prefix ::= seltablist joinop */ + case 102: /* stl_prefix ::= seltablist joinop */ { - if( ALWAYS(yymsp[-1].minor.yy185 && yymsp[-1].minor.yy185->nSrc>0) ) yymsp[-1].minor.yy185->a[yymsp[-1].minor.yy185->nSrc-1].fg.jointype = (u8)yymsp[0].minor.yy194; + if( ALWAYS(yymsp[-1].minor.yy135 && yymsp[-1].minor.yy135->nSrc>0) ) yymsp[-1].minor.yy135->a[yymsp[-1].minor.yy135->nSrc-1].fg.jointype = (u8)yymsp[0].minor.yy70; } break; - case 99: /* stl_prefix ::= */ -{yymsp[1].minor.yy185 = 0;} + case 103: /* stl_prefix ::= */ +{yymsp[1].minor.yy135 = 0;} break; - case 100: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ + case 104: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ { - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); - sqlite3SrcListIndexedBy(pParse, yymsp[-6].minor.yy185, &yymsp[-2].minor.yy0); + yymsp[-6].minor.yy135 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy135,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy18,yymsp[0].minor.yy48); + sqlite3SrcListIndexedBy(pParse, yymsp[-6].minor.yy135, &yymsp[-2].minor.yy0); } break; - case 101: /* seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */ + case 105: /* seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */ { - yymsp[-8].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-8].minor.yy185,&yymsp[-7].minor.yy0,&yymsp[-6].minor.yy0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); - sqlite3SrcListFuncArgs(pParse, yymsp[-8].minor.yy185, yymsp[-4].minor.yy148); + yymsp[-8].minor.yy135 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-8].minor.yy135,&yymsp[-7].minor.yy0,&yymsp[-6].minor.yy0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy18,yymsp[0].minor.yy48); + sqlite3SrcListFuncArgs(pParse, yymsp[-8].minor.yy135, yymsp[-4].minor.yy420); } break; - case 102: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */ + case 106: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */ { - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy243,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); + yymsp[-6].minor.yy135 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy135,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy489,yymsp[-1].minor.yy18,yymsp[0].minor.yy48); } break; - case 103: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ + case 107: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ { - if( yymsp[-6].minor.yy185==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy72==0 && yymsp[0].minor.yy254==0 ){ - yymsp[-6].minor.yy185 = yymsp[-4].minor.yy185; - }else if( yymsp[-4].minor.yy185->nSrc==1 ){ - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,0,0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); - if( yymsp[-6].minor.yy185 ){ - struct SrcList_item *pNew = &yymsp[-6].minor.yy185->a[yymsp[-6].minor.yy185->nSrc-1]; - struct SrcList_item *pOld = yymsp[-4].minor.yy185->a; + if( yymsp[-6].minor.yy135==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy18==0 && yymsp[0].minor.yy48==0 ){ + yymsp[-6].minor.yy135 = yymsp[-4].minor.yy135; + }else if( yymsp[-4].minor.yy135->nSrc==1 ){ + yymsp[-6].minor.yy135 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy135,0,0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy18,yymsp[0].minor.yy48); + if( yymsp[-6].minor.yy135 ){ + struct SrcList_item *pNew = &yymsp[-6].minor.yy135->a[yymsp[-6].minor.yy135->nSrc-1]; + struct SrcList_item *pOld = yymsp[-4].minor.yy135->a; pNew->zName = pOld->zName; pNew->zDatabase = pOld->zDatabase; pNew->pSelect = pOld->pSelect; @@ -139248,199 +149996,240 @@ pOld->zName = pOld->zDatabase = 0; pOld->pSelect = 0; } - sqlite3SrcListDelete(pParse->db, yymsp[-4].minor.yy185); + sqlite3SrcListDelete(pParse->db, yymsp[-4].minor.yy135); }else{ Select *pSubquery; - sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy185); - pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy185,0,0,0,0,SF_NestedFrom,0,0); - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); + sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy135); + pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy135,0,0,0,0,SF_NestedFrom,0); + yymsp[-6].minor.yy135 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy135,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy18,yymsp[0].minor.yy48); } } break; - case 104: /* dbnm ::= */ - case 113: /* indexed_opt ::= */ yytestcase(yyruleno==113); + case 108: /* dbnm ::= */ + case 122: /* indexed_opt ::= */ yytestcase(yyruleno==122); {yymsp[1].minor.yy0.z=0; yymsp[1].minor.yy0.n=0;} break; - case 106: /* fullname ::= nm dbnm */ -{yymsp[-1].minor.yy185 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/} + case 110: /* fullname ::= nm */ +{ + yylhsminor.yy135 = sqlite3SrcListAppend(pParse->db,0,&yymsp[0].minor.yy0,0); + if( IN_RENAME_OBJECT && yylhsminor.yy135 ) sqlite3RenameTokenMap(pParse, yylhsminor.yy135->a[0].zName, &yymsp[0].minor.yy0); +} + yymsp[0].minor.yy135 = yylhsminor.yy135; break; - case 107: /* joinop ::= COMMA|JOIN */ -{ yymsp[0].minor.yy194 = JT_INNER; } + case 111: /* fullname ::= nm DOT nm */ +{ + yylhsminor.yy135 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); + if( IN_RENAME_OBJECT && yylhsminor.yy135 ) sqlite3RenameTokenMap(pParse, yylhsminor.yy135->a[0].zName, &yymsp[0].minor.yy0); +} + yymsp[-2].minor.yy135 = yylhsminor.yy135; break; - case 108: /* joinop ::= JOIN_KW JOIN */ -{yymsp[-1].minor.yy194 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); /*X-overwrites-A*/} + case 112: /* xfullname ::= nm */ +{yymsp[0].minor.yy135 = sqlite3SrcListAppend(pParse->db,0,&yymsp[0].minor.yy0,0); /*A-overwrites-X*/} break; - case 109: /* joinop ::= JOIN_KW nm JOIN */ -{yymsp[-2].minor.yy194 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); /*X-overwrites-A*/} + case 113: /* xfullname ::= nm DOT nm */ +{yymsp[-2].minor.yy135 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/} break; - case 110: /* joinop ::= JOIN_KW nm nm JOIN */ -{yymsp[-3].minor.yy194 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0);/*X-overwrites-A*/} + case 114: /* xfullname ::= nm DOT nm AS nm */ +{ + yymsp[-4].minor.yy135 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,&yymsp[-2].minor.yy0); /*A-overwrites-X*/ + if( yymsp[-4].minor.yy135 ) yymsp[-4].minor.yy135->a[0].zAlias = sqlite3NameFromToken(pParse->db, &yymsp[0].minor.yy0); +} break; - case 111: /* on_opt ::= ON expr */ - case 128: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==128); - case 135: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==135); - case 196: /* case_else ::= ELSE expr */ yytestcase(yyruleno==196); -{yymsp[-1].minor.yy72 = yymsp[0].minor.yy190.pExpr;} + case 115: /* xfullname ::= nm AS nm */ +{ + yymsp[-2].minor.yy135 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-2].minor.yy0,0); /*A-overwrites-X*/ + if( yymsp[-2].minor.yy135 ) yymsp[-2].minor.yy135->a[0].zAlias = sqlite3NameFromToken(pParse->db, &yymsp[0].minor.yy0); +} break; - case 112: /* on_opt ::= */ - case 127: /* having_opt ::= */ yytestcase(yyruleno==127); - case 134: /* where_opt ::= */ yytestcase(yyruleno==134); - case 197: /* case_else ::= */ yytestcase(yyruleno==197); - case 199: /* case_operand ::= */ yytestcase(yyruleno==199); -{yymsp[1].minor.yy72 = 0;} + case 116: /* joinop ::= COMMA|JOIN */ +{ yymsp[0].minor.yy70 = JT_INNER; } break; - case 114: /* indexed_opt ::= INDEXED BY nm */ + case 117: /* joinop ::= JOIN_KW JOIN */ +{yymsp[-1].minor.yy70 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); /*X-overwrites-A*/} + break; + case 118: /* joinop ::= JOIN_KW nm JOIN */ +{yymsp[-2].minor.yy70 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); /*X-overwrites-A*/} + break; + case 119: /* joinop ::= JOIN_KW nm nm JOIN */ +{yymsp[-3].minor.yy70 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0);/*X-overwrites-A*/} + break; + case 120: /* on_opt ::= ON expr */ + case 137: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==137); + case 144: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==144); + case 210: /* case_else ::= ELSE expr */ yytestcase(yyruleno==210); +{yymsp[-1].minor.yy18 = yymsp[0].minor.yy18;} + break; + case 121: /* on_opt ::= */ + case 136: /* having_opt ::= */ yytestcase(yyruleno==136); + case 138: /* limit_opt ::= */ yytestcase(yyruleno==138); + case 143: /* where_opt ::= */ yytestcase(yyruleno==143); + case 211: /* case_else ::= */ yytestcase(yyruleno==211); + case 213: /* case_operand ::= */ yytestcase(yyruleno==213); +{yymsp[1].minor.yy18 = 0;} + break; + case 123: /* indexed_opt ::= INDEXED BY nm */ {yymsp[-2].minor.yy0 = yymsp[0].minor.yy0;} break; - case 115: /* indexed_opt ::= NOT INDEXED */ + case 124: /* indexed_opt ::= NOT INDEXED */ {yymsp[-1].minor.yy0.z=0; yymsp[-1].minor.yy0.n=1;} break; - case 116: /* using_opt ::= USING LP idlist RP */ -{yymsp[-3].minor.yy254 = yymsp[-1].minor.yy254;} + case 125: /* using_opt ::= USING LP idlist RP */ +{yymsp[-3].minor.yy48 = yymsp[-1].minor.yy48;} break; - case 117: /* using_opt ::= */ - case 145: /* idlist_opt ::= */ yytestcase(yyruleno==145); -{yymsp[1].minor.yy254 = 0;} + case 126: /* using_opt ::= */ + case 158: /* idlist_opt ::= */ yytestcase(yyruleno==158); +{yymsp[1].minor.yy48 = 0;} break; - case 119: /* orderby_opt ::= ORDER BY sortlist */ - case 126: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==126); -{yymsp[-2].minor.yy148 = yymsp[0].minor.yy148;} + case 128: /* orderby_opt ::= ORDER BY sortlist */ + case 135: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==135); +{yymsp[-2].minor.yy420 = yymsp[0].minor.yy420;} break; - case 120: /* sortlist ::= sortlist COMMA expr sortorder */ + case 129: /* sortlist ::= sortlist COMMA expr sortorder */ { - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148,yymsp[-1].minor.yy190.pExpr); - sqlite3ExprListSetSortOrder(yymsp[-3].minor.yy148,yymsp[0].minor.yy194); + yymsp[-3].minor.yy420 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy420,yymsp[-1].minor.yy18); + sqlite3ExprListSetSortOrder(yymsp[-3].minor.yy420,yymsp[0].minor.yy70); } break; - case 121: /* sortlist ::= expr sortorder */ + case 130: /* sortlist ::= expr sortorder */ { - yymsp[-1].minor.yy148 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy190.pExpr); /*A-overwrites-Y*/ - sqlite3ExprListSetSortOrder(yymsp[-1].minor.yy148,yymsp[0].minor.yy194); + yymsp[-1].minor.yy420 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy18); /*A-overwrites-Y*/ + sqlite3ExprListSetSortOrder(yymsp[-1].minor.yy420,yymsp[0].minor.yy70); } break; - case 122: /* sortorder ::= ASC */ -{yymsp[0].minor.yy194 = SQLITE_SO_ASC;} + case 131: /* sortorder ::= ASC */ +{yymsp[0].minor.yy70 = SQLITE_SO_ASC;} break; - case 123: /* sortorder ::= DESC */ -{yymsp[0].minor.yy194 = SQLITE_SO_DESC;} + case 132: /* sortorder ::= DESC */ +{yymsp[0].minor.yy70 = SQLITE_SO_DESC;} break; - case 124: /* sortorder ::= */ -{yymsp[1].minor.yy194 = SQLITE_SO_UNDEFINED;} + case 133: /* sortorder ::= */ +{yymsp[1].minor.yy70 = SQLITE_SO_UNDEFINED;} break; - case 129: /* limit_opt ::= */ -{yymsp[1].minor.yy354.pLimit = 0; yymsp[1].minor.yy354.pOffset = 0;} + case 139: /* limit_opt ::= LIMIT expr */ +{yymsp[-1].minor.yy18 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[0].minor.yy18,0);} break; - case 130: /* limit_opt ::= LIMIT expr */ -{yymsp[-1].minor.yy354.pLimit = yymsp[0].minor.yy190.pExpr; yymsp[-1].minor.yy354.pOffset = 0;} + case 140: /* limit_opt ::= LIMIT expr OFFSET expr */ +{yymsp[-3].minor.yy18 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[-2].minor.yy18,yymsp[0].minor.yy18);} break; - case 131: /* limit_opt ::= LIMIT expr OFFSET expr */ -{yymsp[-3].minor.yy354.pLimit = yymsp[-2].minor.yy190.pExpr; yymsp[-3].minor.yy354.pOffset = yymsp[0].minor.yy190.pExpr;} + case 141: /* limit_opt ::= LIMIT expr COMMA expr */ +{yymsp[-3].minor.yy18 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[0].minor.yy18,yymsp[-2].minor.yy18);} break; - case 132: /* limit_opt ::= LIMIT expr COMMA expr */ -{yymsp[-3].minor.yy354.pOffset = yymsp[-2].minor.yy190.pExpr; yymsp[-3].minor.yy354.pLimit = yymsp[0].minor.yy190.pExpr;} - break; - case 133: /* cmd ::= with DELETE FROM fullname indexed_opt where_opt */ + case 142: /* cmd ::= with DELETE FROM xfullname indexed_opt where_opt */ { - sqlite3WithPush(pParse, yymsp[-5].minor.yy285, 1); - sqlite3SrcListIndexedBy(pParse, yymsp[-2].minor.yy185, &yymsp[-1].minor.yy0); - sqlite3DeleteFrom(pParse,yymsp[-2].minor.yy185,yymsp[0].minor.yy72); + sqlite3SrcListIndexedBy(pParse, yymsp[-2].minor.yy135, &yymsp[-1].minor.yy0); + sqlite3DeleteFrom(pParse,yymsp[-2].minor.yy135,yymsp[0].minor.yy18,0,0); } break; - case 136: /* cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt */ + case 145: /* cmd ::= with UPDATE orconf xfullname indexed_opt SET setlist where_opt */ { - sqlite3WithPush(pParse, yymsp[-7].minor.yy285, 1); - sqlite3SrcListIndexedBy(pParse, yymsp[-4].minor.yy185, &yymsp[-3].minor.yy0); - sqlite3ExprListCheckLength(pParse,yymsp[-1].minor.yy148,"set list"); - sqlite3Update(pParse,yymsp[-4].minor.yy185,yymsp[-1].minor.yy148,yymsp[0].minor.yy72,yymsp[-5].minor.yy194); + sqlite3SrcListIndexedBy(pParse, yymsp[-4].minor.yy135, &yymsp[-3].minor.yy0); + sqlite3ExprListCheckLength(pParse,yymsp[-1].minor.yy420,"set list"); + sqlite3Update(pParse,yymsp[-4].minor.yy135,yymsp[-1].minor.yy420,yymsp[0].minor.yy18,yymsp[-5].minor.yy70,0,0,0); } break; - case 137: /* setlist ::= setlist COMMA nm EQ expr */ + case 146: /* setlist ::= setlist COMMA nm EQ expr */ { - yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy148, yymsp[0].minor.yy190.pExpr); - sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy148, &yymsp[-2].minor.yy0, 1); + yymsp[-4].minor.yy420 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy420, yymsp[0].minor.yy18); + sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy420, &yymsp[-2].minor.yy0, 1); } break; - case 138: /* setlist ::= setlist COMMA LP idlist RP EQ expr */ + case 147: /* setlist ::= setlist COMMA LP idlist RP EQ expr */ { - yymsp[-6].minor.yy148 = sqlite3ExprListAppendVector(pParse, yymsp[-6].minor.yy148, yymsp[-3].minor.yy254, yymsp[0].minor.yy190.pExpr); + yymsp[-6].minor.yy420 = sqlite3ExprListAppendVector(pParse, yymsp[-6].minor.yy420, yymsp[-3].minor.yy48, yymsp[0].minor.yy18); } break; - case 139: /* setlist ::= nm EQ expr */ + case 148: /* setlist ::= nm EQ expr */ { - yylhsminor.yy148 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy190.pExpr); - sqlite3ExprListSetName(pParse, yylhsminor.yy148, &yymsp[-2].minor.yy0, 1); + yylhsminor.yy420 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy18); + sqlite3ExprListSetName(pParse, yylhsminor.yy420, &yymsp[-2].minor.yy0, 1); } - yymsp[-2].minor.yy148 = yylhsminor.yy148; + yymsp[-2].minor.yy420 = yylhsminor.yy420; break; - case 140: /* setlist ::= LP idlist RP EQ expr */ + case 149: /* setlist ::= LP idlist RP EQ expr */ { - yymsp[-4].minor.yy148 = sqlite3ExprListAppendVector(pParse, 0, yymsp[-3].minor.yy254, yymsp[0].minor.yy190.pExpr); + yymsp[-4].minor.yy420 = sqlite3ExprListAppendVector(pParse, 0, yymsp[-3].minor.yy48, yymsp[0].minor.yy18); } break; - case 141: /* cmd ::= with insert_cmd INTO fullname idlist_opt select */ + case 150: /* cmd ::= with insert_cmd INTO xfullname idlist_opt select upsert */ { - sqlite3WithPush(pParse, yymsp[-5].minor.yy285, 1); - sqlite3Insert(pParse, yymsp[-2].minor.yy185, yymsp[0].minor.yy243, yymsp[-1].minor.yy254, yymsp[-4].minor.yy194); + sqlite3Insert(pParse, yymsp[-3].minor.yy135, yymsp[-1].minor.yy489, yymsp[-2].minor.yy48, yymsp[-5].minor.yy70, yymsp[0].minor.yy340); } break; - case 142: /* cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES */ + case 151: /* cmd ::= with insert_cmd INTO xfullname idlist_opt DEFAULT VALUES */ { - sqlite3WithPush(pParse, yymsp[-6].minor.yy285, 1); - sqlite3Insert(pParse, yymsp[-3].minor.yy185, 0, yymsp[-2].minor.yy254, yymsp[-5].minor.yy194); + sqlite3Insert(pParse, yymsp[-3].minor.yy135, 0, yymsp[-2].minor.yy48, yymsp[-5].minor.yy70, 0); } break; - case 146: /* idlist_opt ::= LP idlist RP */ -{yymsp[-2].minor.yy254 = yymsp[-1].minor.yy254;} + case 152: /* upsert ::= */ +{ yymsp[1].minor.yy340 = 0; } break; - case 147: /* idlist ::= idlist COMMA nm */ -{yymsp[-2].minor.yy254 = sqlite3IdListAppend(pParse->db,yymsp[-2].minor.yy254,&yymsp[0].minor.yy0);} + case 153: /* upsert ::= ON CONFLICT LP sortlist RP where_opt DO UPDATE SET setlist where_opt */ +{ yymsp[-10].minor.yy340 = sqlite3UpsertNew(pParse->db,yymsp[-7].minor.yy420,yymsp[-5].minor.yy18,yymsp[-1].minor.yy420,yymsp[0].minor.yy18);} break; - case 148: /* idlist ::= nm */ -{yymsp[0].minor.yy254 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0); /*A-overwrites-Y*/} + case 154: /* upsert ::= ON CONFLICT LP sortlist RP where_opt DO NOTHING */ +{ yymsp[-7].minor.yy340 = sqlite3UpsertNew(pParse->db,yymsp[-4].minor.yy420,yymsp[-2].minor.yy18,0,0); } break; - case 149: /* expr ::= LP expr RP */ -{spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ yymsp[-2].minor.yy190.pExpr = yymsp[-1].minor.yy190.pExpr;} + case 155: /* upsert ::= ON CONFLICT DO NOTHING */ +{ yymsp[-3].minor.yy340 = sqlite3UpsertNew(pParse->db,0,0,0,0); } break; - case 150: /* expr ::= ID|INDEXED */ - case 151: /* expr ::= JOIN_KW */ yytestcase(yyruleno==151); -{spanExpr(&yymsp[0].minor.yy190,pParse,TK_ID,yymsp[0].minor.yy0); /*A-overwrites-X*/} + case 159: /* idlist_opt ::= LP idlist RP */ +{yymsp[-2].minor.yy48 = yymsp[-1].minor.yy48;} break; - case 152: /* expr ::= nm DOT nm */ + case 160: /* idlist ::= idlist COMMA nm */ +{yymsp[-2].minor.yy48 = sqlite3IdListAppend(pParse,yymsp[-2].minor.yy48,&yymsp[0].minor.yy0);} + break; + case 161: /* idlist ::= nm */ +{yymsp[0].minor.yy48 = sqlite3IdListAppend(pParse,0,&yymsp[0].minor.yy0); /*A-overwrites-Y*/} + break; + case 162: /* expr ::= LP expr RP */ +{yymsp[-2].minor.yy18 = yymsp[-1].minor.yy18;} + break; + case 163: /* expr ::= ID|INDEXED */ + case 164: /* expr ::= JOIN_KW */ yytestcase(yyruleno==164); +{yymsp[0].minor.yy18=tokenExpr(pParse,TK_ID,yymsp[0].minor.yy0); /*A-overwrites-X*/} + break; + case 165: /* expr ::= nm DOT nm */ { Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1); - spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2); + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenMap(pParse, (void*)temp2, &yymsp[0].minor.yy0); + sqlite3RenameTokenMap(pParse, (void*)temp1, &yymsp[-2].minor.yy0); + } + yylhsminor.yy18 = sqlite3PExpr(pParse, TK_DOT, temp1, temp2); } + yymsp[-2].minor.yy18 = yylhsminor.yy18; break; - case 153: /* expr ::= nm DOT nm DOT nm */ + case 166: /* expr ::= nm DOT nm DOT nm */ { Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-4].minor.yy0, 1); Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *temp3 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1); Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3); - spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4); + if( IN_RENAME_OBJECT ){ + sqlite3RenameTokenMap(pParse, (void*)temp3, &yymsp[0].minor.yy0); + sqlite3RenameTokenMap(pParse, (void*)temp2, &yymsp[-2].minor.yy0); + } + yylhsminor.yy18 = sqlite3PExpr(pParse, TK_DOT, temp1, temp4); } + yymsp[-4].minor.yy18 = yylhsminor.yy18; break; - case 154: /* term ::= NULL|FLOAT|BLOB */ - case 155: /* term ::= STRING */ yytestcase(yyruleno==155); -{spanExpr(&yymsp[0].minor.yy190,pParse,yymsp[0].major,yymsp[0].minor.yy0); /*A-overwrites-X*/} + case 167: /* term ::= NULL|FLOAT|BLOB */ + case 168: /* term ::= STRING */ yytestcase(yyruleno==168); +{yymsp[0].minor.yy18=tokenExpr(pParse,yymsp[0].major,yymsp[0].minor.yy0); /*A-overwrites-X*/} break; - case 156: /* term ::= INTEGER */ + case 169: /* term ::= INTEGER */ { - yylhsminor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_INTEGER, &yymsp[0].minor.yy0, 1); - yylhsminor.yy190.zStart = yymsp[0].minor.yy0.z; - yylhsminor.yy190.zEnd = yymsp[0].minor.yy0.z + yymsp[0].minor.yy0.n; + yylhsminor.yy18 = sqlite3ExprAlloc(pParse->db, TK_INTEGER, &yymsp[0].minor.yy0, 1); } - yymsp[0].minor.yy190 = yylhsminor.yy190; + yymsp[0].minor.yy18 = yylhsminor.yy18; break; - case 157: /* expr ::= VARIABLE */ + case 170: /* expr ::= VARIABLE */ { if( !(yymsp[0].minor.yy0.z[0]=='#' && sqlite3Isdigit(yymsp[0].minor.yy0.z[1])) ){ u32 n = yymsp[0].minor.yy0.n; - spanExpr(&yymsp[0].minor.yy190, pParse, TK_VARIABLE, yymsp[0].minor.yy0); - sqlite3ExprAssignVarNumber(pParse, yymsp[0].minor.yy190.pExpr, n); + yymsp[0].minor.yy18 = tokenExpr(pParse, TK_VARIABLE, yymsp[0].minor.yy0); + sqlite3ExprAssignVarNumber(pParse, yymsp[0].minor.yy18, n); }else{ /* When doing a nested parse, one can include terms in an expression ** that look like this: #1 #2 ... These terms refer to registers @@ -139447,159 +150236,156 @@ ** in the virtual machine. #N is the N-th register. */ Token t = yymsp[0].minor.yy0; /*A-overwrites-X*/ assert( t.n>=2 ); - spanSet(&yymsp[0].minor.yy190, &t, &t); if( pParse->nested==0 ){ sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &t); - yymsp[0].minor.yy190.pExpr = 0; + yymsp[0].minor.yy18 = 0; }else{ - yymsp[0].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0); - if( yymsp[0].minor.yy190.pExpr ) sqlite3GetInt32(&t.z[1], &yymsp[0].minor.yy190.pExpr->iTable); + yymsp[0].minor.yy18 = sqlite3PExpr(pParse, TK_REGISTER, 0, 0); + if( yymsp[0].minor.yy18 ) sqlite3GetInt32(&t.z[1], &yymsp[0].minor.yy18->iTable); } } } break; - case 158: /* expr ::= expr COLLATE ID|STRING */ + case 171: /* expr ::= expr COLLATE ID|STRING */ { - yymsp[-2].minor.yy190.pExpr = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy190.pExpr, &yymsp[0].minor.yy0, 1); - yymsp[-2].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + yymsp[-2].minor.yy18 = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy18, &yymsp[0].minor.yy0, 1); } break; - case 159: /* expr ::= CAST LP expr AS typetoken RP */ + case 172: /* expr ::= CAST LP expr AS typetoken RP */ { - spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-5].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_CAST, &yymsp[-1].minor.yy0, 1); - sqlite3ExprAttachSubtrees(pParse->db, yymsp[-5].minor.yy190.pExpr, yymsp[-3].minor.yy190.pExpr, 0); + yymsp[-5].minor.yy18 = sqlite3ExprAlloc(pParse->db, TK_CAST, &yymsp[-1].minor.yy0, 1); + sqlite3ExprAttachSubtrees(pParse->db, yymsp[-5].minor.yy18, yymsp[-3].minor.yy18, 0); } break; - case 160: /* expr ::= ID|INDEXED LP distinct exprlist RP */ + case 173: /* expr ::= ID|INDEXED LP distinct exprlist RP */ { - if( yymsp[-1].minor.yy148 && yymsp[-1].minor.yy148->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){ - sqlite3ErrorMsg(pParse, "too many arguments on function %T", &yymsp[-4].minor.yy0); - } - yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy148, &yymsp[-4].minor.yy0); - spanSet(&yylhsminor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); - if( yymsp[-2].minor.yy194==SF_Distinct && yylhsminor.yy190.pExpr ){ - yylhsminor.yy190.pExpr->flags |= EP_Distinct; - } + yylhsminor.yy18 = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy420, &yymsp[-4].minor.yy0, yymsp[-2].minor.yy70); } - yymsp[-4].minor.yy190 = yylhsminor.yy190; + yymsp[-4].minor.yy18 = yylhsminor.yy18; break; - case 161: /* expr ::= ID|INDEXED LP STAR RP */ + case 174: /* expr ::= ID|INDEXED LP STAR RP */ { - yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0); - spanSet(&yylhsminor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); + yylhsminor.yy18 = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0, 0); } - yymsp[-3].minor.yy190 = yylhsminor.yy190; + yymsp[-3].minor.yy18 = yylhsminor.yy18; break; - case 162: /* term ::= CTIME_KW */ + case 175: /* expr ::= ID|INDEXED LP distinct exprlist RP over_clause */ { - yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0); - spanSet(&yylhsminor.yy190, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0); + yylhsminor.yy18 = sqlite3ExprFunction(pParse, yymsp[-2].minor.yy420, &yymsp[-5].minor.yy0, yymsp[-3].minor.yy70); + sqlite3WindowAttach(pParse, yylhsminor.yy18, yymsp[0].minor.yy327); } - yymsp[0].minor.yy190 = yylhsminor.yy190; + yymsp[-5].minor.yy18 = yylhsminor.yy18; break; - case 163: /* expr ::= LP nexprlist COMMA expr RP */ + case 176: /* expr ::= ID|INDEXED LP STAR RP over_clause */ { - ExprList *pList = sqlite3ExprListAppend(pParse, yymsp[-3].minor.yy148, yymsp[-1].minor.yy190.pExpr); - yylhsminor.yy190.pExpr = sqlite3PExpr(pParse, TK_VECTOR, 0, 0); - if( yylhsminor.yy190.pExpr ){ - yylhsminor.yy190.pExpr->x.pList = pList; - spanSet(&yylhsminor.yy190, &yymsp[-4].minor.yy0, &yymsp[0].minor.yy0); + yylhsminor.yy18 = sqlite3ExprFunction(pParse, 0, &yymsp[-4].minor.yy0, 0); + sqlite3WindowAttach(pParse, yylhsminor.yy18, yymsp[0].minor.yy327); +} + yymsp[-4].minor.yy18 = yylhsminor.yy18; + break; + case 177: /* term ::= CTIME_KW */ +{ + yylhsminor.yy18 = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0, 0); +} + yymsp[0].minor.yy18 = yylhsminor.yy18; + break; + case 178: /* expr ::= LP nexprlist COMMA expr RP */ +{ + ExprList *pList = sqlite3ExprListAppend(pParse, yymsp[-3].minor.yy420, yymsp[-1].minor.yy18); + yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_VECTOR, 0, 0); + if( yymsp[-4].minor.yy18 ){ + yymsp[-4].minor.yy18->x.pList = pList; }else{ sqlite3ExprListDelete(pParse->db, pList); } } - yymsp[-4].minor.yy190 = yylhsminor.yy190; break; - case 164: /* expr ::= expr AND expr */ - case 165: /* expr ::= expr OR expr */ yytestcase(yyruleno==165); - case 166: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==166); - case 167: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==167); - case 168: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==168); - case 169: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==169); - case 170: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==170); - case 171: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==171); -{spanBinaryExpr(pParse,yymsp[-1].major,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy190);} + case 179: /* expr ::= expr AND expr */ + case 180: /* expr ::= expr OR expr */ yytestcase(yyruleno==180); + case 181: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==181); + case 182: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==182); + case 183: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==183); + case 184: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==184); + case 185: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==185); + case 186: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==186); +{yymsp[-2].minor.yy18=sqlite3PExpr(pParse,yymsp[-1].major,yymsp[-2].minor.yy18,yymsp[0].minor.yy18);} break; - case 172: /* likeop ::= NOT LIKE_KW|MATCH */ + case 187: /* likeop ::= NOT LIKE_KW|MATCH */ {yymsp[-1].minor.yy0=yymsp[0].minor.yy0; yymsp[-1].minor.yy0.n|=0x80000000; /*yymsp[-1].minor.yy0-overwrite-yymsp[0].minor.yy0*/} break; - case 173: /* expr ::= expr likeop expr */ + case 188: /* expr ::= expr likeop expr */ { ExprList *pList; int bNot = yymsp[-1].minor.yy0.n & 0x80000000; yymsp[-1].minor.yy0.n &= 0x7fffffff; - pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy190.pExpr); - yymsp[-2].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy0); - exprNot(pParse, bNot, &yymsp[-2].minor.yy190); - yymsp[-2].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd; - if( yymsp[-2].minor.yy190.pExpr ) yymsp[-2].minor.yy190.pExpr->flags |= EP_InfixFunc; + pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy18); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy18); + yymsp[-2].minor.yy18 = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy0, 0); + if( bNot ) yymsp[-2].minor.yy18 = sqlite3PExpr(pParse, TK_NOT, yymsp[-2].minor.yy18, 0); + if( yymsp[-2].minor.yy18 ) yymsp[-2].minor.yy18->flags |= EP_InfixFunc; } break; - case 174: /* expr ::= expr likeop expr ESCAPE expr */ + case 189: /* expr ::= expr likeop expr ESCAPE expr */ { ExprList *pList; int bNot = yymsp[-3].minor.yy0.n & 0x80000000; yymsp[-3].minor.yy0.n &= 0x7fffffff; - pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy0); - exprNot(pParse, bNot, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd; - if( yymsp[-4].minor.yy190.pExpr ) yymsp[-4].minor.yy190.pExpr->flags |= EP_InfixFunc; + pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy18); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy18); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy18); + yymsp[-4].minor.yy18 = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy0, 0); + if( bNot ) yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy18, 0); + if( yymsp[-4].minor.yy18 ) yymsp[-4].minor.yy18->flags |= EP_InfixFunc; } break; - case 175: /* expr ::= expr ISNULL|NOTNULL */ -{spanUnaryPostfix(pParse,yymsp[0].major,&yymsp[-1].minor.yy190,&yymsp[0].minor.yy0);} + case 190: /* expr ::= expr ISNULL|NOTNULL */ +{yymsp[-1].minor.yy18 = sqlite3PExpr(pParse,yymsp[0].major,yymsp[-1].minor.yy18,0);} break; - case 176: /* expr ::= expr NOT NULL */ -{spanUnaryPostfix(pParse,TK_NOTNULL,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy0);} + case 191: /* expr ::= expr NOT NULL */ +{yymsp[-2].minor.yy18 = sqlite3PExpr(pParse,TK_NOTNULL,yymsp[-2].minor.yy18,0);} break; - case 177: /* expr ::= expr IS expr */ + case 192: /* expr ::= expr IS expr */ { - spanBinaryExpr(pParse,TK_IS,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy190); - binaryToUnaryIfNull(pParse, yymsp[0].minor.yy190.pExpr, yymsp[-2].minor.yy190.pExpr, TK_ISNULL); + yymsp[-2].minor.yy18 = sqlite3PExpr(pParse,TK_IS,yymsp[-2].minor.yy18,yymsp[0].minor.yy18); + binaryToUnaryIfNull(pParse, yymsp[0].minor.yy18, yymsp[-2].minor.yy18, TK_ISNULL); } break; - case 178: /* expr ::= expr IS NOT expr */ + case 193: /* expr ::= expr IS NOT expr */ { - spanBinaryExpr(pParse,TK_ISNOT,&yymsp[-3].minor.yy190,&yymsp[0].minor.yy190); - binaryToUnaryIfNull(pParse, yymsp[0].minor.yy190.pExpr, yymsp[-3].minor.yy190.pExpr, TK_NOTNULL); + yymsp[-3].minor.yy18 = sqlite3PExpr(pParse,TK_ISNOT,yymsp[-3].minor.yy18,yymsp[0].minor.yy18); + binaryToUnaryIfNull(pParse, yymsp[0].minor.yy18, yymsp[-3].minor.yy18, TK_NOTNULL); } break; - case 179: /* expr ::= NOT expr */ - case 180: /* expr ::= BITNOT expr */ yytestcase(yyruleno==180); -{spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,yymsp[-1].major,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/} + case 194: /* expr ::= NOT expr */ + case 195: /* expr ::= BITNOT expr */ yytestcase(yyruleno==195); +{yymsp[-1].minor.yy18 = sqlite3PExpr(pParse, yymsp[-1].major, yymsp[0].minor.yy18, 0);/*A-overwrites-B*/} break; - case 181: /* expr ::= MINUS expr */ -{spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,TK_UMINUS,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/} + case 196: /* expr ::= PLUS|MINUS expr */ +{ + yymsp[-1].minor.yy18 = sqlite3PExpr(pParse, yymsp[-1].major==TK_PLUS ? TK_UPLUS : TK_UMINUS, yymsp[0].minor.yy18, 0); + /*A-overwrites-B*/ +} break; - case 182: /* expr ::= PLUS expr */ -{spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,TK_UPLUS,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/} + case 197: /* between_op ::= BETWEEN */ + case 200: /* in_op ::= IN */ yytestcase(yyruleno==200); +{yymsp[0].minor.yy70 = 0;} break; - case 183: /* between_op ::= BETWEEN */ - case 186: /* in_op ::= IN */ yytestcase(yyruleno==186); -{yymsp[0].minor.yy194 = 0;} - break; - case 185: /* expr ::= expr between_op expr AND expr */ + case 199: /* expr ::= expr between_op expr AND expr */ { - ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy190.pExpr, 0); - if( yymsp[-4].minor.yy190.pExpr ){ - yymsp[-4].minor.yy190.pExpr->x.pList = pList; + ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy18); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy18); + yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy18, 0); + if( yymsp[-4].minor.yy18 ){ + yymsp[-4].minor.yy18->x.pList = pList; }else{ sqlite3ExprListDelete(pParse->db, pList); } - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd; + if( yymsp[-3].minor.yy70 ) yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy18, 0); } break; - case 188: /* expr ::= expr in_op LP exprlist RP */ + case 202: /* expr ::= expr in_op LP exprlist RP */ { - if( yymsp[-1].minor.yy148==0 ){ + if( yymsp[-1].minor.yy420==0 ){ /* Expressions of the form ** ** expr1 IN () @@ -139608,9 +150394,9 @@ ** simplify to constants 0 (false) and 1 (true), respectively, ** regardless of the value of expr1. */ - sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[yymsp[-3].minor.yy194],1); - }else if( yymsp[-1].minor.yy148->nExpr==1 ){ + sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy18); + yymsp[-4].minor.yy18 = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[yymsp[-3].minor.yy70],1); + }else if( yymsp[-1].minor.yy420->nExpr==1 ){ /* Expressions of the form: ** ** expr1 IN (?1) @@ -139627,9 +150413,9 @@ ** affinity or the collating sequence to use for comparison. Otherwise, ** the semantics would be subtly different from IN or NOT IN. */ - Expr *pRHS = yymsp[-1].minor.yy148->a[0].pExpr; - yymsp[-1].minor.yy148->a[0].pExpr = 0; - sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy148); + Expr *pRHS = yymsp[-1].minor.yy420->a[0].pExpr; + yymsp[-1].minor.yy420->a[0].pExpr = 0; + sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy420); /* pRHS cannot be NULL because a malloc error would have been detected ** before now and control would have never reached this point */ if( ALWAYS(pRHS) ){ @@ -139636,192 +150422,190 @@ pRHS->flags &= ~EP_Collate; pRHS->flags |= EP_Generic; } - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy194 ? TK_NE : TK_EQ, yymsp[-4].minor.yy190.pExpr, pRHS); + yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, yymsp[-3].minor.yy70 ? TK_NE : TK_EQ, yymsp[-4].minor.yy18, pRHS); }else{ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); - if( yymsp[-4].minor.yy190.pExpr ){ - yymsp[-4].minor.yy190.pExpr->x.pList = yymsp[-1].minor.yy148; - sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy190.pExpr); + yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy18, 0); + if( yymsp[-4].minor.yy18 ){ + yymsp[-4].minor.yy18->x.pList = yymsp[-1].minor.yy420; + sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy18); }else{ - sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy148); + sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy420); } - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); + if( yymsp[-3].minor.yy70 ) yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy18, 0); } - yymsp[-4].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; } break; - case 189: /* expr ::= LP select RP */ + case 203: /* expr ::= LP select RP */ { - spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ - yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0); - sqlite3PExprAddSelect(pParse, yymsp[-2].minor.yy190.pExpr, yymsp[-1].minor.yy243); + yymsp[-2].minor.yy18 = sqlite3PExpr(pParse, TK_SELECT, 0, 0); + sqlite3PExprAddSelect(pParse, yymsp[-2].minor.yy18, yymsp[-1].minor.yy489); } break; - case 190: /* expr ::= expr in_op LP select RP */ + case 204: /* expr ::= expr in_op LP select RP */ { - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); - sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy190.pExpr, yymsp[-1].minor.yy243); - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy18, 0); + sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy18, yymsp[-1].minor.yy489); + if( yymsp[-3].minor.yy70 ) yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy18, 0); } break; - case 191: /* expr ::= expr in_op nm dbnm paren_exprlist */ + case 205: /* expr ::= expr in_op nm dbnm paren_exprlist */ { SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0); - Select *pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0,0); - if( yymsp[0].minor.yy148 ) sqlite3SrcListFuncArgs(pParse, pSelect ? pSrc : 0, yymsp[0].minor.yy148); - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); - sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy190.pExpr, pSelect); - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = yymsp[-1].minor.yy0.z ? &yymsp[-1].minor.yy0.z[yymsp[-1].minor.yy0.n] : &yymsp[-2].minor.yy0.z[yymsp[-2].minor.yy0.n]; + Select *pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0); + if( yymsp[0].minor.yy420 ) sqlite3SrcListFuncArgs(pParse, pSelect ? pSrc : 0, yymsp[0].minor.yy420); + yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy18, 0); + sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy18, pSelect); + if( yymsp[-3].minor.yy70 ) yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy18, 0); } break; - case 192: /* expr ::= EXISTS LP select RP */ + case 206: /* expr ::= EXISTS LP select RP */ { Expr *p; - spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ - p = yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0); - sqlite3PExprAddSelect(pParse, p, yymsp[-1].minor.yy243); + p = yymsp[-3].minor.yy18 = sqlite3PExpr(pParse, TK_EXISTS, 0, 0); + sqlite3PExprAddSelect(pParse, p, yymsp[-1].minor.yy489); } break; - case 193: /* expr ::= CASE case_operand case_exprlist case_else END */ + case 207: /* expr ::= CASE case_operand case_exprlist case_else END */ { - spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-C*/ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy72, 0); - if( yymsp[-4].minor.yy190.pExpr ){ - yymsp[-4].minor.yy190.pExpr->x.pList = yymsp[-1].minor.yy72 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy148,yymsp[-1].minor.yy72) : yymsp[-2].minor.yy148; - sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy190.pExpr); + yymsp[-4].minor.yy18 = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy18, 0); + if( yymsp[-4].minor.yy18 ){ + yymsp[-4].minor.yy18->x.pList = yymsp[-1].minor.yy18 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy420,yymsp[-1].minor.yy18) : yymsp[-2].minor.yy420; + sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy18); }else{ - sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy148); - sqlite3ExprDelete(pParse->db, yymsp[-1].minor.yy72); + sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy420); + sqlite3ExprDelete(pParse->db, yymsp[-1].minor.yy18); } } break; - case 194: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */ + case 208: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */ { - yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy148, yymsp[-2].minor.yy190.pExpr); - yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy148, yymsp[0].minor.yy190.pExpr); + yymsp[-4].minor.yy420 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy420, yymsp[-2].minor.yy18); + yymsp[-4].minor.yy420 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy420, yymsp[0].minor.yy18); } break; - case 195: /* case_exprlist ::= WHEN expr THEN expr */ + case 209: /* case_exprlist ::= WHEN expr THEN expr */ { - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr); - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148, yymsp[0].minor.yy190.pExpr); + yymsp[-3].minor.yy420 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy18); + yymsp[-3].minor.yy420 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy420, yymsp[0].minor.yy18); } break; - case 198: /* case_operand ::= expr */ -{yymsp[0].minor.yy72 = yymsp[0].minor.yy190.pExpr; /*A-overwrites-X*/} + case 212: /* case_operand ::= expr */ +{yymsp[0].minor.yy18 = yymsp[0].minor.yy18; /*A-overwrites-X*/} break; - case 201: /* nexprlist ::= nexprlist COMMA expr */ -{yymsp[-2].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy148,yymsp[0].minor.yy190.pExpr);} + case 215: /* nexprlist ::= nexprlist COMMA expr */ +{yymsp[-2].minor.yy420 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy420,yymsp[0].minor.yy18);} break; - case 202: /* nexprlist ::= expr */ -{yymsp[0].minor.yy148 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy190.pExpr); /*A-overwrites-Y*/} + case 216: /* nexprlist ::= expr */ +{yymsp[0].minor.yy420 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy18); /*A-overwrites-Y*/} break; - case 204: /* paren_exprlist ::= LP exprlist RP */ - case 209: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==209); -{yymsp[-2].minor.yy148 = yymsp[-1].minor.yy148;} + case 218: /* paren_exprlist ::= LP exprlist RP */ + case 223: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==223); +{yymsp[-2].minor.yy420 = yymsp[-1].minor.yy420;} break; - case 205: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */ + case 219: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */ { sqlite3CreateIndex(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, - sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy148, yymsp[-10].minor.yy194, - &yymsp[-11].minor.yy0, yymsp[0].minor.yy72, SQLITE_SO_ASC, yymsp[-8].minor.yy194, SQLITE_IDXTYPE_APPDEF); + sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy420, yymsp[-10].minor.yy70, + &yymsp[-11].minor.yy0, yymsp[0].minor.yy18, SQLITE_SO_ASC, yymsp[-8].minor.yy70, SQLITE_IDXTYPE_APPDEF); + if( IN_RENAME_OBJECT && pParse->pNewIndex ){ + sqlite3RenameTokenMap(pParse, pParse->pNewIndex->zName, &yymsp[-4].minor.yy0); + } } break; - case 206: /* uniqueflag ::= UNIQUE */ - case 246: /* raisetype ::= ABORT */ yytestcase(yyruleno==246); -{yymsp[0].minor.yy194 = OE_Abort;} + case 220: /* uniqueflag ::= UNIQUE */ + case 260: /* raisetype ::= ABORT */ yytestcase(yyruleno==260); +{yymsp[0].minor.yy70 = OE_Abort;} break; - case 207: /* uniqueflag ::= */ -{yymsp[1].minor.yy194 = OE_None;} + case 221: /* uniqueflag ::= */ +{yymsp[1].minor.yy70 = OE_None;} break; - case 210: /* eidlist ::= eidlist COMMA nm collate sortorder */ + case 224: /* eidlist ::= eidlist COMMA nm collate sortorder */ { - yymsp[-4].minor.yy148 = parserAddExprIdListTerm(pParse, yymsp[-4].minor.yy148, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy194, yymsp[0].minor.yy194); + yymsp[-4].minor.yy420 = parserAddExprIdListTerm(pParse, yymsp[-4].minor.yy420, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy70, yymsp[0].minor.yy70); } break; - case 211: /* eidlist ::= nm collate sortorder */ + case 225: /* eidlist ::= nm collate sortorder */ { - yymsp[-2].minor.yy148 = parserAddExprIdListTerm(pParse, 0, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy194, yymsp[0].minor.yy194); /*A-overwrites-Y*/ + yymsp[-2].minor.yy420 = parserAddExprIdListTerm(pParse, 0, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy70, yymsp[0].minor.yy70); /*A-overwrites-Y*/ } break; - case 214: /* cmd ::= DROP INDEX ifexists fullname */ -{sqlite3DropIndex(pParse, yymsp[0].minor.yy185, yymsp[-1].minor.yy194);} + case 228: /* cmd ::= DROP INDEX ifexists fullname */ +{sqlite3DropIndex(pParse, yymsp[0].minor.yy135, yymsp[-1].minor.yy70);} break; - case 215: /* cmd ::= VACUUM */ + case 229: /* cmd ::= VACUUM */ {sqlite3Vacuum(pParse,0);} break; - case 216: /* cmd ::= VACUUM nm */ + case 230: /* cmd ::= VACUUM nm */ {sqlite3Vacuum(pParse,&yymsp[0].minor.yy0);} break; - case 217: /* cmd ::= PRAGMA nm dbnm */ + case 231: /* cmd ::= PRAGMA nm dbnm */ {sqlite3Pragma(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,0,0);} break; - case 218: /* cmd ::= PRAGMA nm dbnm EQ nmnum */ + case 232: /* cmd ::= PRAGMA nm dbnm EQ nmnum */ {sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,0);} break; - case 219: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */ + case 233: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */ {sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,0);} break; - case 220: /* cmd ::= PRAGMA nm dbnm EQ minus_num */ + case 234: /* cmd ::= PRAGMA nm dbnm EQ minus_num */ {sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,1);} break; - case 221: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */ + case 235: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */ {sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,1);} break; - case 224: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ + case 238: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ { Token all; all.z = yymsp[-3].minor.yy0.z; all.n = (int)(yymsp[0].minor.yy0.z - yymsp[-3].minor.yy0.z) + yymsp[0].minor.yy0.n; - sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy145, &all); + sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy207, &all); } break; - case 225: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ + case 239: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ { - sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy194, yymsp[-4].minor.yy332.a, yymsp[-4].minor.yy332.b, yymsp[-2].minor.yy185, yymsp[0].minor.yy72, yymsp[-10].minor.yy194, yymsp[-8].minor.yy194); + sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy70, yymsp[-4].minor.yy34.a, yymsp[-4].minor.yy34.b, yymsp[-2].minor.yy135, yymsp[0].minor.yy18, yymsp[-10].minor.yy70, yymsp[-8].minor.yy70); yymsp[-10].minor.yy0 = (yymsp[-6].minor.yy0.n==0?yymsp[-7].minor.yy0:yymsp[-6].minor.yy0); /*A-overwrites-T*/ } break; - case 226: /* trigger_time ::= BEFORE|AFTER */ -{ yymsp[0].minor.yy194 = yymsp[0].major; /*A-overwrites-X*/ } + case 240: /* trigger_time ::= BEFORE|AFTER */ +{ yymsp[0].minor.yy70 = yymsp[0].major; /*A-overwrites-X*/ } break; - case 227: /* trigger_time ::= INSTEAD OF */ -{ yymsp[-1].minor.yy194 = TK_INSTEAD;} + case 241: /* trigger_time ::= INSTEAD OF */ +{ yymsp[-1].minor.yy70 = TK_INSTEAD;} break; - case 228: /* trigger_time ::= */ -{ yymsp[1].minor.yy194 = TK_BEFORE; } + case 242: /* trigger_time ::= */ +{ yymsp[1].minor.yy70 = TK_BEFORE; } break; - case 229: /* trigger_event ::= DELETE|INSERT */ - case 230: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==230); -{yymsp[0].minor.yy332.a = yymsp[0].major; /*A-overwrites-X*/ yymsp[0].minor.yy332.b = 0;} + case 243: /* trigger_event ::= DELETE|INSERT */ + case 244: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==244); +{yymsp[0].minor.yy34.a = yymsp[0].major; /*A-overwrites-X*/ yymsp[0].minor.yy34.b = 0;} break; - case 231: /* trigger_event ::= UPDATE OF idlist */ -{yymsp[-2].minor.yy332.a = TK_UPDATE; yymsp[-2].minor.yy332.b = yymsp[0].minor.yy254;} + case 245: /* trigger_event ::= UPDATE OF idlist */ +{yymsp[-2].minor.yy34.a = TK_UPDATE; yymsp[-2].minor.yy34.b = yymsp[0].minor.yy48;} break; - case 232: /* when_clause ::= */ - case 251: /* key_opt ::= */ yytestcase(yyruleno==251); -{ yymsp[1].minor.yy72 = 0; } + case 246: /* when_clause ::= */ + case 265: /* key_opt ::= */ yytestcase(yyruleno==265); + case 307: /* filter_opt ::= */ yytestcase(yyruleno==307); +{ yymsp[1].minor.yy18 = 0; } break; - case 233: /* when_clause ::= WHEN expr */ - case 252: /* key_opt ::= KEY expr */ yytestcase(yyruleno==252); -{ yymsp[-1].minor.yy72 = yymsp[0].minor.yy190.pExpr; } + case 247: /* when_clause ::= WHEN expr */ + case 266: /* key_opt ::= KEY expr */ yytestcase(yyruleno==266); +{ yymsp[-1].minor.yy18 = yymsp[0].minor.yy18; } break; - case 234: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ + case 248: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ { - assert( yymsp[-2].minor.yy145!=0 ); - yymsp[-2].minor.yy145->pLast->pNext = yymsp[-1].minor.yy145; - yymsp[-2].minor.yy145->pLast = yymsp[-1].minor.yy145; + assert( yymsp[-2].minor.yy207!=0 ); + yymsp[-2].minor.yy207->pLast->pNext = yymsp[-1].minor.yy207; + yymsp[-2].minor.yy207->pLast = yymsp[-1].minor.yy207; } break; - case 235: /* trigger_cmd_list ::= trigger_cmd SEMI */ + case 249: /* trigger_cmd_list ::= trigger_cmd SEMI */ { - assert( yymsp[-1].minor.yy145!=0 ); - yymsp[-1].minor.yy145->pLast = yymsp[-1].minor.yy145; + assert( yymsp[-1].minor.yy207!=0 ); + yymsp[-1].minor.yy207->pLast = yymsp[-1].minor.yy207; } break; - case 236: /* trnm ::= nm DOT nm */ + case 250: /* trnm ::= nm DOT nm */ { yymsp[-2].minor.yy0 = yymsp[0].minor.yy0; sqlite3ErrorMsg(pParse, @@ -139829,7 +150613,7 @@ "statements within triggers"); } break; - case 237: /* tridxby ::= INDEXED BY nm */ + case 251: /* tridxby ::= INDEXED BY nm */ { sqlite3ErrorMsg(pParse, "the INDEXED BY clause is not allowed on UPDATE or DELETE statements " @@ -139836,7 +150620,7 @@ "within triggers"); } break; - case 238: /* tridxby ::= NOT INDEXED */ + case 252: /* tridxby ::= NOT INDEXED */ { sqlite3ErrorMsg(pParse, "the NOT INDEXED clause is not allowed on UPDATE or DELETE statements " @@ -139843,182 +150627,292 @@ "within triggers"); } break; - case 239: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt */ -{yymsp[-6].minor.yy145 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-4].minor.yy0, yymsp[-1].minor.yy148, yymsp[0].minor.yy72, yymsp[-5].minor.yy194);} + case 253: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt */ +{yylhsminor.yy207 = sqlite3TriggerUpdateStep(pParse, &yymsp[-5].minor.yy0, yymsp[-2].minor.yy420, yymsp[-1].minor.yy18, yymsp[-6].minor.yy70, yymsp[-7].minor.yy0.z, yymsp[0].minor.yy392);} + yymsp[-7].minor.yy207 = yylhsminor.yy207; break; - case 240: /* trigger_cmd ::= insert_cmd INTO trnm idlist_opt select */ -{yymsp[-4].minor.yy145 = sqlite3TriggerInsertStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy254, yymsp[0].minor.yy243, yymsp[-4].minor.yy194);/*A-overwrites-R*/} + case 254: /* trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select upsert scanpt */ +{ + yylhsminor.yy207 = sqlite3TriggerInsertStep(pParse,&yymsp[-4].minor.yy0,yymsp[-3].minor.yy48,yymsp[-2].minor.yy489,yymsp[-6].minor.yy70,yymsp[-1].minor.yy340,yymsp[-7].minor.yy392,yymsp[0].minor.yy392);/*yylhsminor.yy207-overwrites-yymsp[-6].minor.yy70*/ +} + yymsp[-7].minor.yy207 = yylhsminor.yy207; break; - case 241: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt */ -{yymsp[-4].minor.yy145 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[0].minor.yy72);} + case 255: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt */ +{yylhsminor.yy207 = sqlite3TriggerDeleteStep(pParse, &yymsp[-3].minor.yy0, yymsp[-1].minor.yy18, yymsp[-5].minor.yy0.z, yymsp[0].minor.yy392);} + yymsp[-5].minor.yy207 = yylhsminor.yy207; break; - case 242: /* trigger_cmd ::= select */ -{yymsp[0].minor.yy145 = sqlite3TriggerSelectStep(pParse->db, yymsp[0].minor.yy243); /*A-overwrites-X*/} + case 256: /* trigger_cmd ::= scanpt select scanpt */ +{yylhsminor.yy207 = sqlite3TriggerSelectStep(pParse->db, yymsp[-1].minor.yy489, yymsp[-2].minor.yy392, yymsp[0].minor.yy392); /*yylhsminor.yy207-overwrites-yymsp[-1].minor.yy489*/} + yymsp[-2].minor.yy207 = yylhsminor.yy207; break; - case 243: /* expr ::= RAISE LP IGNORE RP */ + case 257: /* expr ::= RAISE LP IGNORE RP */ { - spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0); - if( yymsp[-3].minor.yy190.pExpr ){ - yymsp[-3].minor.yy190.pExpr->affinity = OE_Ignore; + yymsp[-3].minor.yy18 = sqlite3PExpr(pParse, TK_RAISE, 0, 0); + if( yymsp[-3].minor.yy18 ){ + yymsp[-3].minor.yy18->affinity = OE_Ignore; } } break; - case 244: /* expr ::= RAISE LP raisetype COMMA nm RP */ + case 258: /* expr ::= RAISE LP raisetype COMMA nm RP */ { - spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-5].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_RAISE, &yymsp[-1].minor.yy0, 1); - if( yymsp[-5].minor.yy190.pExpr ) { - yymsp[-5].minor.yy190.pExpr->affinity = (char)yymsp[-3].minor.yy194; + yymsp[-5].minor.yy18 = sqlite3ExprAlloc(pParse->db, TK_RAISE, &yymsp[-1].minor.yy0, 1); + if( yymsp[-5].minor.yy18 ) { + yymsp[-5].minor.yy18->affinity = (char)yymsp[-3].minor.yy70; } } break; - case 245: /* raisetype ::= ROLLBACK */ -{yymsp[0].minor.yy194 = OE_Rollback;} + case 259: /* raisetype ::= ROLLBACK */ +{yymsp[0].minor.yy70 = OE_Rollback;} break; - case 247: /* raisetype ::= FAIL */ -{yymsp[0].minor.yy194 = OE_Fail;} + case 261: /* raisetype ::= FAIL */ +{yymsp[0].minor.yy70 = OE_Fail;} break; - case 248: /* cmd ::= DROP TRIGGER ifexists fullname */ + case 262: /* cmd ::= DROP TRIGGER ifexists fullname */ { - sqlite3DropTrigger(pParse,yymsp[0].minor.yy185,yymsp[-1].minor.yy194); + sqlite3DropTrigger(pParse,yymsp[0].minor.yy135,yymsp[-1].minor.yy70); } break; - case 249: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ + case 263: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ { - sqlite3Attach(pParse, yymsp[-3].minor.yy190.pExpr, yymsp[-1].minor.yy190.pExpr, yymsp[0].minor.yy72); + sqlite3Attach(pParse, yymsp[-3].minor.yy18, yymsp[-1].minor.yy18, yymsp[0].minor.yy18); } break; - case 250: /* cmd ::= DETACH database_kw_opt expr */ + case 264: /* cmd ::= DETACH database_kw_opt expr */ { - sqlite3Detach(pParse, yymsp[0].minor.yy190.pExpr); + sqlite3Detach(pParse, yymsp[0].minor.yy18); } break; - case 253: /* cmd ::= REINDEX */ + case 267: /* cmd ::= REINDEX */ {sqlite3Reindex(pParse, 0, 0);} break; - case 254: /* cmd ::= REINDEX nm dbnm */ + case 268: /* cmd ::= REINDEX nm dbnm */ {sqlite3Reindex(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} break; - case 255: /* cmd ::= ANALYZE */ + case 269: /* cmd ::= ANALYZE */ {sqlite3Analyze(pParse, 0, 0);} break; - case 256: /* cmd ::= ANALYZE nm dbnm */ + case 270: /* cmd ::= ANALYZE nm dbnm */ {sqlite3Analyze(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} break; - case 257: /* cmd ::= ALTER TABLE fullname RENAME TO nm */ + case 271: /* cmd ::= ALTER TABLE fullname RENAME TO nm */ { - sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy185,&yymsp[0].minor.yy0); + sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy135,&yymsp[0].minor.yy0); } break; - case 258: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */ + case 272: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */ { yymsp[-1].minor.yy0.n = (int)(pParse->sLastToken.z-yymsp[-1].minor.yy0.z) + pParse->sLastToken.n; sqlite3AlterFinishAddColumn(pParse, &yymsp[-1].minor.yy0); } break; - case 259: /* add_column_fullname ::= fullname */ + case 273: /* add_column_fullname ::= fullname */ { disableLookaside(pParse); - sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy185); + sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy135); } break; - case 260: /* cmd ::= create_vtab */ + case 274: /* cmd ::= ALTER TABLE fullname RENAME kwcolumn_opt nm TO nm */ +{ + sqlite3AlterRenameColumn(pParse, yymsp[-5].minor.yy135, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0); +} + break; + case 275: /* cmd ::= create_vtab */ {sqlite3VtabFinishParse(pParse,0);} break; - case 261: /* cmd ::= create_vtab LP vtabarglist RP */ + case 276: /* cmd ::= create_vtab LP vtabarglist RP */ {sqlite3VtabFinishParse(pParse,&yymsp[0].minor.yy0);} break; - case 262: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */ + case 277: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */ { - sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy194); + sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy70); } break; - case 263: /* vtabarg ::= */ + case 278: /* vtabarg ::= */ {sqlite3VtabArgInit(pParse);} break; - case 264: /* vtabargtoken ::= ANY */ - case 265: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==265); - case 266: /* lp ::= LP */ yytestcase(yyruleno==266); + case 279: /* vtabargtoken ::= ANY */ + case 280: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==280); + case 281: /* lp ::= LP */ yytestcase(yyruleno==281); {sqlite3VtabArgExtend(pParse,&yymsp[0].minor.yy0);} break; - case 267: /* with ::= */ -{yymsp[1].minor.yy285 = 0;} + case 282: /* with ::= WITH wqlist */ + case 283: /* with ::= WITH RECURSIVE wqlist */ yytestcase(yyruleno==283); +{ sqlite3WithPush(pParse, yymsp[0].minor.yy449, 1); } break; - case 268: /* with ::= WITH wqlist */ -{ yymsp[-1].minor.yy285 = yymsp[0].minor.yy285; } + case 284: /* wqlist ::= nm eidlist_opt AS LP select RP */ +{ + yymsp[-5].minor.yy449 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy420, yymsp[-1].minor.yy489); /*A-overwrites-X*/ +} break; - case 269: /* with ::= WITH RECURSIVE wqlist */ -{ yymsp[-2].minor.yy285 = yymsp[0].minor.yy285; } + case 285: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */ +{ + yymsp[-7].minor.yy449 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy449, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy420, yymsp[-1].minor.yy489); +} break; - case 270: /* wqlist ::= nm eidlist_opt AS LP select RP */ + case 286: /* windowdefn_list ::= windowdefn */ +{ yylhsminor.yy327 = yymsp[0].minor.yy327; } + yymsp[0].minor.yy327 = yylhsminor.yy327; + break; + case 287: /* windowdefn_list ::= windowdefn_list COMMA windowdefn */ { - yymsp[-5].minor.yy285 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy148, yymsp[-1].minor.yy243); /*A-overwrites-X*/ + assert( yymsp[0].minor.yy327!=0 ); + yymsp[0].minor.yy327->pNextWin = yymsp[-2].minor.yy327; + yylhsminor.yy327 = yymsp[0].minor.yy327; } + yymsp[-2].minor.yy327 = yylhsminor.yy327; break; - case 271: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */ + case 288: /* windowdefn ::= nm AS window */ { - yymsp[-7].minor.yy285 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy285, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy148, yymsp[-1].minor.yy243); + if( ALWAYS(yymsp[0].minor.yy327) ){ + yymsp[0].minor.yy327->zName = sqlite3DbStrNDup(pParse->db, yymsp[-2].minor.yy0.z, yymsp[-2].minor.yy0.n); + } + yylhsminor.yy327 = yymsp[0].minor.yy327; } + yymsp[-2].minor.yy327 = yylhsminor.yy327; break; + case 289: /* window ::= LP part_opt orderby_opt frame_opt RP */ +{ + yymsp[-4].minor.yy327 = yymsp[-1].minor.yy327; + if( ALWAYS(yymsp[-4].minor.yy327) ){ + yymsp[-4].minor.yy327->pPartition = yymsp[-3].minor.yy420; + yymsp[-4].minor.yy327->pOrderBy = yymsp[-2].minor.yy420; + } +} + break; + case 290: /* part_opt ::= PARTITION BY nexprlist */ +{ yymsp[-2].minor.yy420 = yymsp[0].minor.yy420; } + break; + case 291: /* part_opt ::= */ +{ yymsp[1].minor.yy420 = 0; } + break; + case 292: /* frame_opt ::= */ +{ + yymsp[1].minor.yy327 = sqlite3WindowAlloc(pParse, TK_RANGE, TK_UNBOUNDED, 0, TK_CURRENT, 0); +} + break; + case 293: /* frame_opt ::= range_or_rows frame_bound_s */ +{ + yylhsminor.yy327 = sqlite3WindowAlloc(pParse, yymsp[-1].minor.yy70, yymsp[0].minor.yy119.eType, yymsp[0].minor.yy119.pExpr, TK_CURRENT, 0); +} + yymsp[-1].minor.yy327 = yylhsminor.yy327; + break; + case 294: /* frame_opt ::= range_or_rows BETWEEN frame_bound_s AND frame_bound_e */ +{ + yylhsminor.yy327 = sqlite3WindowAlloc(pParse, yymsp[-4].minor.yy70, yymsp[-2].minor.yy119.eType, yymsp[-2].minor.yy119.pExpr, yymsp[0].minor.yy119.eType, yymsp[0].minor.yy119.pExpr); +} + yymsp[-4].minor.yy327 = yylhsminor.yy327; + break; + case 295: /* range_or_rows ::= RANGE */ +{ yymsp[0].minor.yy70 = TK_RANGE; } + break; + case 296: /* range_or_rows ::= ROWS */ +{ yymsp[0].minor.yy70 = TK_ROWS; } + break; + case 297: /* frame_bound_s ::= frame_bound */ + case 299: /* frame_bound_e ::= frame_bound */ yytestcase(yyruleno==299); +{ yylhsminor.yy119 = yymsp[0].minor.yy119; } + yymsp[0].minor.yy119 = yylhsminor.yy119; + break; + case 298: /* frame_bound_s ::= UNBOUNDED PRECEDING */ + case 300: /* frame_bound_e ::= UNBOUNDED FOLLOWING */ yytestcase(yyruleno==300); +{yymsp[-1].minor.yy119.eType = TK_UNBOUNDED; yymsp[-1].minor.yy119.pExpr = 0;} + break; + case 301: /* frame_bound ::= expr PRECEDING */ +{ yylhsminor.yy119.eType = TK_PRECEDING; yylhsminor.yy119.pExpr = yymsp[-1].minor.yy18; } + yymsp[-1].minor.yy119 = yylhsminor.yy119; + break; + case 302: /* frame_bound ::= CURRENT ROW */ +{ yymsp[-1].minor.yy119.eType = TK_CURRENT ; yymsp[-1].minor.yy119.pExpr = 0; } + break; + case 303: /* frame_bound ::= expr FOLLOWING */ +{ yylhsminor.yy119.eType = TK_FOLLOWING; yylhsminor.yy119.pExpr = yymsp[-1].minor.yy18; } + yymsp[-1].minor.yy119 = yylhsminor.yy119; + break; + case 304: /* window_clause ::= WINDOW windowdefn_list */ +{ yymsp[-1].minor.yy327 = yymsp[0].minor.yy327; } + break; + case 305: /* over_clause ::= filter_opt OVER window */ +{ + yylhsminor.yy327 = yymsp[0].minor.yy327; + assert( yylhsminor.yy327!=0 ); + yylhsminor.yy327->pFilter = yymsp[-2].minor.yy18; +} + yymsp[-2].minor.yy327 = yylhsminor.yy327; + break; + case 306: /* over_clause ::= filter_opt OVER nm */ +{ + yylhsminor.yy327 = (Window*)sqlite3DbMallocZero(pParse->db, sizeof(Window)); + if( yylhsminor.yy327 ){ + yylhsminor.yy327->zName = sqlite3DbStrNDup(pParse->db, yymsp[0].minor.yy0.z, yymsp[0].minor.yy0.n); + yylhsminor.yy327->pFilter = yymsp[-2].minor.yy18; + }else{ + sqlite3ExprDelete(pParse->db, yymsp[-2].minor.yy18); + } +} + yymsp[-2].minor.yy327 = yylhsminor.yy327; + break; + case 308: /* filter_opt ::= FILTER LP WHERE expr RP */ +{ yymsp[-4].minor.yy18 = yymsp[-1].minor.yy18; } + break; default: - /* (272) input ::= cmdlist */ yytestcase(yyruleno==272); - /* (273) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==273); - /* (274) cmdlist ::= ecmd (OPTIMIZED OUT) */ assert(yyruleno!=274); - /* (275) ecmd ::= SEMI */ yytestcase(yyruleno==275); - /* (276) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==276); - /* (277) explain ::= */ yytestcase(yyruleno==277); - /* (278) trans_opt ::= */ yytestcase(yyruleno==278); - /* (279) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==279); - /* (280) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==280); - /* (281) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==281); - /* (282) savepoint_opt ::= */ yytestcase(yyruleno==282); - /* (283) cmd ::= create_table create_table_args */ yytestcase(yyruleno==283); - /* (284) columnlist ::= columnlist COMMA columnname carglist */ yytestcase(yyruleno==284); - /* (285) columnlist ::= columnname carglist */ yytestcase(yyruleno==285); - /* (286) nm ::= ID|INDEXED */ yytestcase(yyruleno==286); - /* (287) nm ::= STRING */ yytestcase(yyruleno==287); - /* (288) nm ::= JOIN_KW */ yytestcase(yyruleno==288); - /* (289) typetoken ::= typename */ yytestcase(yyruleno==289); - /* (290) typename ::= ID|STRING */ yytestcase(yyruleno==290); - /* (291) signed ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=291); - /* (292) signed ::= minus_num (OPTIMIZED OUT) */ assert(yyruleno!=292); - /* (293) carglist ::= carglist ccons */ yytestcase(yyruleno==293); - /* (294) carglist ::= */ yytestcase(yyruleno==294); - /* (295) ccons ::= NULL onconf */ yytestcase(yyruleno==295); - /* (296) conslist_opt ::= COMMA conslist */ yytestcase(yyruleno==296); - /* (297) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==297); - /* (298) conslist ::= tcons (OPTIMIZED OUT) */ assert(yyruleno!=298); - /* (299) tconscomma ::= */ yytestcase(yyruleno==299); - /* (300) defer_subclause_opt ::= defer_subclause (OPTIMIZED OUT) */ assert(yyruleno!=300); - /* (301) resolvetype ::= raisetype (OPTIMIZED OUT) */ assert(yyruleno!=301); - /* (302) selectnowith ::= oneselect (OPTIMIZED OUT) */ assert(yyruleno!=302); - /* (303) oneselect ::= values */ yytestcase(yyruleno==303); - /* (304) sclp ::= selcollist COMMA */ yytestcase(yyruleno==304); - /* (305) as ::= ID|STRING */ yytestcase(yyruleno==305); - /* (306) expr ::= term (OPTIMIZED OUT) */ assert(yyruleno!=306); - /* (307) likeop ::= LIKE_KW|MATCH */ yytestcase(yyruleno==307); - /* (308) exprlist ::= nexprlist */ yytestcase(yyruleno==308); - /* (309) nmnum ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=309); - /* (310) nmnum ::= nm (OPTIMIZED OUT) */ assert(yyruleno!=310); - /* (311) nmnum ::= ON */ yytestcase(yyruleno==311); - /* (312) nmnum ::= DELETE */ yytestcase(yyruleno==312); - /* (313) nmnum ::= DEFAULT */ yytestcase(yyruleno==313); - /* (314) plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==314); - /* (315) foreach_clause ::= */ yytestcase(yyruleno==315); - /* (316) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==316); - /* (317) trnm ::= nm */ yytestcase(yyruleno==317); - /* (318) tridxby ::= */ yytestcase(yyruleno==318); - /* (319) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==319); - /* (320) database_kw_opt ::= */ yytestcase(yyruleno==320); - /* (321) kwcolumn_opt ::= */ yytestcase(yyruleno==321); - /* (322) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==322); - /* (323) vtabarglist ::= vtabarg */ yytestcase(yyruleno==323); - /* (324) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==324); - /* (325) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==325); - /* (326) anylist ::= */ yytestcase(yyruleno==326); - /* (327) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==327); - /* (328) anylist ::= anylist ANY */ yytestcase(yyruleno==328); + /* (309) input ::= cmdlist */ yytestcase(yyruleno==309); + /* (310) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==310); + /* (311) cmdlist ::= ecmd (OPTIMIZED OUT) */ assert(yyruleno!=311); + /* (312) ecmd ::= SEMI */ yytestcase(yyruleno==312); + /* (313) ecmd ::= cmdx SEMI */ yytestcase(yyruleno==313); + /* (314) ecmd ::= explain cmdx */ yytestcase(yyruleno==314); + /* (315) trans_opt ::= */ yytestcase(yyruleno==315); + /* (316) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==316); + /* (317) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==317); + /* (318) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==318); + /* (319) savepoint_opt ::= */ yytestcase(yyruleno==319); + /* (320) cmd ::= create_table create_table_args */ yytestcase(yyruleno==320); + /* (321) columnlist ::= columnlist COMMA columnname carglist */ yytestcase(yyruleno==321); + /* (322) columnlist ::= columnname carglist */ yytestcase(yyruleno==322); + /* (323) nm ::= ID|INDEXED */ yytestcase(yyruleno==323); + /* (324) nm ::= STRING */ yytestcase(yyruleno==324); + /* (325) nm ::= JOIN_KW */ yytestcase(yyruleno==325); + /* (326) typetoken ::= typename */ yytestcase(yyruleno==326); + /* (327) typename ::= ID|STRING */ yytestcase(yyruleno==327); + /* (328) signed ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=328); + /* (329) signed ::= minus_num (OPTIMIZED OUT) */ assert(yyruleno!=329); + /* (330) carglist ::= carglist ccons */ yytestcase(yyruleno==330); + /* (331) carglist ::= */ yytestcase(yyruleno==331); + /* (332) ccons ::= NULL onconf */ yytestcase(yyruleno==332); + /* (333) conslist_opt ::= COMMA conslist */ yytestcase(yyruleno==333); + /* (334) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==334); + /* (335) conslist ::= tcons (OPTIMIZED OUT) */ assert(yyruleno!=335); + /* (336) tconscomma ::= */ yytestcase(yyruleno==336); + /* (337) defer_subclause_opt ::= defer_subclause (OPTIMIZED OUT) */ assert(yyruleno!=337); + /* (338) resolvetype ::= raisetype (OPTIMIZED OUT) */ assert(yyruleno!=338); + /* (339) selectnowith ::= oneselect (OPTIMIZED OUT) */ assert(yyruleno!=339); + /* (340) oneselect ::= values */ yytestcase(yyruleno==340); + /* (341) sclp ::= selcollist COMMA */ yytestcase(yyruleno==341); + /* (342) as ::= ID|STRING */ yytestcase(yyruleno==342); + /* (343) expr ::= term (OPTIMIZED OUT) */ assert(yyruleno!=343); + /* (344) likeop ::= LIKE_KW|MATCH */ yytestcase(yyruleno==344); + /* (345) exprlist ::= nexprlist */ yytestcase(yyruleno==345); + /* (346) nmnum ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=346); + /* (347) nmnum ::= nm (OPTIMIZED OUT) */ assert(yyruleno!=347); + /* (348) nmnum ::= ON */ yytestcase(yyruleno==348); + /* (349) nmnum ::= DELETE */ yytestcase(yyruleno==349); + /* (350) nmnum ::= DEFAULT */ yytestcase(yyruleno==350); + /* (351) plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==351); + /* (352) foreach_clause ::= */ yytestcase(yyruleno==352); + /* (353) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==353); + /* (354) trnm ::= nm */ yytestcase(yyruleno==354); + /* (355) tridxby ::= */ yytestcase(yyruleno==355); + /* (356) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==356); + /* (357) database_kw_opt ::= */ yytestcase(yyruleno==357); + /* (358) kwcolumn_opt ::= */ yytestcase(yyruleno==358); + /* (359) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==359); + /* (360) vtabarglist ::= vtabarg */ yytestcase(yyruleno==360); + /* (361) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==361); + /* (362) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==362); + /* (363) anylist ::= */ yytestcase(yyruleno==363); + /* (364) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==364); + /* (365) anylist ::= anylist ANY */ yytestcase(yyruleno==365); + /* (366) with ::= */ yytestcase(yyruleno==366); break; /********** End reduce actions ************************************************/ }; @@ -140034,16 +150928,12 @@ /* It is not possible for a REDUCE to be followed by an error */ assert( yyact!=YY_ERROR_ACTION ); - if( yyact==YY_ACCEPT_ACTION ){ - yypParser->yytos += yysize; - yy_accept(yypParser); - }else{ - yymsp += yysize+1; - yypParser->yytos = yymsp; - yymsp->stateno = (YYACTIONTYPE)yyact; - yymsp->major = (YYCODETYPE)yygoto; - yyTraceShift(yypParser, yyact); - } + yymsp += yysize+1; + yypParser->yytos = yymsp; + yymsp->stateno = (YYACTIONTYPE)yyact; + yymsp->major = (YYCODETYPE)yygoto; + yyTraceShift(yypParser, yyact, "... then shift"); + return yyact; } /* @@ -140053,7 +150943,8 @@ static void yy_parse_failed( yyParser *yypParser /* The parser */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #ifndef NDEBUG if( yyTraceFILE ){ fprintf(yyTraceFILE,"%sFail!\n",yyTracePrompt); @@ -140064,7 +150955,8 @@ ** parser fails */ /************ Begin %parse_failure code ***************************************/ /************ End %parse_failure code *****************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserCTX_STORE } #endif /* YYNOERRORRECOVERY */ @@ -140076,15 +150968,20 @@ int yymajor, /* The major type of the error token */ sqlite3ParserTOKENTYPE yyminor /* The minor type of the error token */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #define TOKEN yyminor /************ Begin %syntax_error code ****************************************/ UNUSED_PARAMETER(yymajor); /* Silence some compiler warnings */ - assert( TOKEN.z[0] ); /* The tokenizer always gives us a token */ - sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN); + if( TOKEN.z[0] ){ + sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN); + }else{ + sqlite3ErrorMsg(pParse, "incomplete input"); + } /************ End %syntax_error code ******************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserCTX_STORE } /* @@ -140093,7 +150990,8 @@ static void yy_accept( yyParser *yypParser /* The parser */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #ifndef NDEBUG if( yyTraceFILE ){ fprintf(yyTraceFILE,"%sAccept!\n",yyTracePrompt); @@ -140107,7 +151005,8 @@ ** parser accepts */ /*********** Begin %parse_accept code *****************************************/ /*********** End %parse_accept code *******************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserCTX_STORE } /* The main parser program. @@ -140136,7 +151035,7 @@ sqlite3ParserARG_PDECL /* Optional %extra_argument parameter */ ){ YYMINORTYPE yyminorunion; - unsigned int yyact; /* The parser action. */ + YYACTIONTYPE yyact; /* The parser action. */ #if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY) int yyendofinput; /* True if we are at the end of input */ #endif @@ -140143,31 +151042,44 @@ #ifdef YYERRORSYMBOL int yyerrorhit = 0; /* True if yymajor has invoked an error */ #endif - yyParser *yypParser; /* The parser */ + yyParser *yypParser = (yyParser*)yyp; /* The parser */ + sqlite3ParserCTX_FETCH + sqlite3ParserARG_STORE - yypParser = (yyParser*)yyp; assert( yypParser->yytos!=0 ); #if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY) yyendofinput = (yymajor==0); #endif - sqlite3ParserARG_STORE; + yyact = yypParser->yytos->stateno; #ifndef NDEBUG if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sInput '%s'\n",yyTracePrompt,yyTokenName[yymajor]); + if( yyact < YY_MIN_REDUCE ){ + fprintf(yyTraceFILE,"%sInput '%s' in state %d\n", + yyTracePrompt,yyTokenName[yymajor],yyact); + }else{ + fprintf(yyTraceFILE,"%sInput '%s' with pending reduce %d\n", + yyTracePrompt,yyTokenName[yymajor],yyact-YY_MIN_REDUCE); + } } #endif do{ - yyact = yy_find_shift_action(yypParser,(YYCODETYPE)yymajor); - if( yyact <= YY_MAX_SHIFTREDUCE ){ - yy_shift(yypParser,yyact,yymajor,yyminor); + assert( yyact==yypParser->yytos->stateno ); + yyact = yy_find_shift_action((YYCODETYPE)yymajor,yyact); + if( yyact >= YY_MIN_REDUCE ){ + yyact = yy_reduce(yypParser,yyact-YY_MIN_REDUCE,yymajor, + yyminor sqlite3ParserCTX_PARAM); + }else if( yyact <= YY_MAX_SHIFTREDUCE ){ + yy_shift(yypParser,yyact,(YYCODETYPE)yymajor,yyminor); #ifndef YYNOERRORRECOVERY yypParser->yyerrcnt--; #endif - yymajor = YYNOCODE; - }else if( yyact <= YY_MAX_REDUCE ){ - yy_reduce(yypParser,yyact-YY_MIN_REDUCE); + break; + }else if( yyact==YY_ACCEPT_ACTION ){ + yypParser->yytos--; + yy_accept(yypParser); + return; }else{ assert( yyact == YY_ERROR_ACTION ); yyminorunion.yy0 = yyminor; @@ -140214,10 +151126,9 @@ yymajor = YYNOCODE; }else{ while( yypParser->yytos >= yypParser->yystack - && yymx != YYERRORSYMBOL && (yyact = yy_find_reduce_action( yypParser->yytos->stateno, - YYERRORSYMBOL)) >= YY_MIN_REDUCE + YYERRORSYMBOL)) > YY_MAX_SHIFTREDUCE ){ yy_pop_parser_stack(yypParser); } @@ -140234,6 +151145,8 @@ } yypParser->yyerrcnt = 3; yyerrorhit = 1; + if( yymajor==YYNOCODE ) break; + yyact = yypParser->yytos->stateno; #elif defined(YYNOERRORRECOVERY) /* If the YYNOERRORRECOVERY macro is defined, then do not attempt to ** do any kind of error recovery. Instead, simply invoke the syntax @@ -140244,8 +151157,7 @@ */ yy_syntax_error(yypParser,yymajor, yyminor); yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); - yymajor = YYNOCODE; - + break; #else /* YYERRORSYMBOL is not defined */ /* This is what we do if the grammar does not define ERROR: ** @@ -140267,10 +151179,10 @@ yypParser->yyerrcnt = -1; #endif } - yymajor = YYNOCODE; + break; #endif } - }while( yymajor!=YYNOCODE && yypParser->yytos>yypParser->yystack ); + }while( yypParser->yytos>yypParser->yystack ); #ifndef NDEBUG if( yyTraceFILE ){ yyStackEntry *i; @@ -140286,6 +151198,21 @@ return; } +/* +** Return the fallback token corresponding to canonical token iToken, or +** 0 if iToken has no fallback. +*/ +SQLITE_PRIVATE int sqlite3ParserFallback(int iToken){ +#ifdef YYFALLBACK + if( iToken<(int)(sizeof(yyFallback)/sizeof(yyFallback[0])) ){ + return yyFallback[iToken]; + } +#else + (void)iToken; +#endif + return 0; +} + /************** End of parse.c ***********************************************/ /************** Begin file tokenize.c ****************************************/ /* @@ -140344,11 +151271,12 @@ #define CC_TILDA 25 /* '~' */ #define CC_DOT 26 /* '.' */ #define CC_ILLEGAL 27 /* Illegal character */ +#define CC_NUL 28 /* 0x00 */ static const unsigned char aiClass[] = { #ifdef SQLITE_ASCII /* x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xa xb xc xd xe xf */ -/* 0x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 7, 7, 27, 7, 7, 27, 27, +/* 0x */ 28, 27, 27, 27, 27, 27, 27, 27, 27, 7, 7, 27, 7, 7, 27, 27, /* 1x */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, /* 2x */ 7, 15, 8, 5, 4, 22, 24, 8, 17, 18, 21, 20, 23, 11, 26, 16, /* 3x */ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 5, 19, 12, 14, 13, 6, @@ -140447,19 +151375,20 @@ ** is substantially reduced. This is important for embedded applications ** on platforms with limited memory. */ -/* Hash score: 182 */ -/* zKWText[] encodes 834 bytes of keyword text in 554 bytes */ +/* Hash score: 208 */ +/* zKWText[] encodes 923 bytes of keyword text in 614 bytes */ /* REINDEXEDESCAPEACHECKEYBEFOREIGNOREGEXPLAINSTEADDATABASELECT */ /* ABLEFTHENDEFERRABLELSEXCEPTRANSACTIONATURALTERAISEXCLUSIVE */ /* XISTSAVEPOINTERSECTRIGGEREFERENCESCONSTRAINTOFFSETEMPORARY */ -/* UNIQUERYWITHOUTERELEASEATTACHAVINGROUPDATEBEGINNERECURSIVE */ -/* BETWEENOTNULLIKECASCADELETECASECOLLATECREATECURRENT_DATEDETACH */ -/* IMMEDIATEJOINSERTMATCHPLANALYZEPRAGMABORTVALUESVIRTUALIMITWHEN */ -/* WHERENAMEAFTEREPLACEANDEFAULTAUTOINCREMENTCASTCOLUMNCOMMIT */ -/* CONFLICTCROSSCURRENT_TIMESTAMPRIMARYDEFERREDISTINCTDROPFAIL */ -/* FROMFULLGLOBYIFISNULLORDERESTRICTRIGHTROLLBACKROWUNIONUSING */ -/* VACUUMVIEWINITIALLY */ -static const char zKWText[553] = { +/* UNIQUERYWITHOUTERELEASEATTACHAVINGROUPDATEBEGINNERANGEBETWEEN */ +/* OTHINGLOBYCASCADELETECASECOLLATECREATECURRENT_DATEDETACH */ +/* IMMEDIATEJOINSERTLIKEMATCHPLANALYZEPRAGMABORTVALUESVIRTUALIMIT */ +/* WHENOTNULLWHERECURSIVEAFTERENAMEANDEFAULTAUTOINCREMENTCAST */ +/* COLUMNCOMMITCONFLICTCROSSCURRENT_TIMESTAMPARTITIONDEFERRED */ +/* ISTINCTDROPRECEDINGFAILFILTEREPLACEFOLLOWINGFROMFULLIFISNULL */ +/* ORDERESTRICTOVERIGHTROLLBACKROWSUNBOUNDEDUNIONUSINGVACUUMVIEW */ +/* INDOWINITIALLYPRIMARY */ +static const char zKWText[613] = { 'R','E','I','N','D','E','X','E','D','E','S','C','A','P','E','A','C','H', 'E','C','K','E','Y','B','E','F','O','R','E','I','G','N','O','R','E','G', 'E','X','P','L','A','I','N','S','T','E','A','D','D','A','T','A','B','A', @@ -140472,83 +151401,90 @@ 'O','F','F','S','E','T','E','M','P','O','R','A','R','Y','U','N','I','Q', 'U','E','R','Y','W','I','T','H','O','U','T','E','R','E','L','E','A','S', 'E','A','T','T','A','C','H','A','V','I','N','G','R','O','U','P','D','A', - 'T','E','B','E','G','I','N','N','E','R','E','C','U','R','S','I','V','E', - 'B','E','T','W','E','E','N','O','T','N','U','L','L','I','K','E','C','A', - 'S','C','A','D','E','L','E','T','E','C','A','S','E','C','O','L','L','A', - 'T','E','C','R','E','A','T','E','C','U','R','R','E','N','T','_','D','A', - 'T','E','D','E','T','A','C','H','I','M','M','E','D','I','A','T','E','J', - 'O','I','N','S','E','R','T','M','A','T','C','H','P','L','A','N','A','L', - 'Y','Z','E','P','R','A','G','M','A','B','O','R','T','V','A','L','U','E', - 'S','V','I','R','T','U','A','L','I','M','I','T','W','H','E','N','W','H', - 'E','R','E','N','A','M','E','A','F','T','E','R','E','P','L','A','C','E', - 'A','N','D','E','F','A','U','L','T','A','U','T','O','I','N','C','R','E', - 'M','E','N','T','C','A','S','T','C','O','L','U','M','N','C','O','M','M', - 'I','T','C','O','N','F','L','I','C','T','C','R','O','S','S','C','U','R', - 'R','E','N','T','_','T','I','M','E','S','T','A','M','P','R','I','M','A', - 'R','Y','D','E','F','E','R','R','E','D','I','S','T','I','N','C','T','D', - 'R','O','P','F','A','I','L','F','R','O','M','F','U','L','L','G','L','O', - 'B','Y','I','F','I','S','N','U','L','L','O','R','D','E','R','E','S','T', - 'R','I','C','T','R','I','G','H','T','R','O','L','L','B','A','C','K','R', - 'O','W','U','N','I','O','N','U','S','I','N','G','V','A','C','U','U','M', - 'V','I','E','W','I','N','I','T','I','A','L','L','Y', + 'T','E','B','E','G','I','N','N','E','R','A','N','G','E','B','E','T','W', + 'E','E','N','O','T','H','I','N','G','L','O','B','Y','C','A','S','C','A', + 'D','E','L','E','T','E','C','A','S','E','C','O','L','L','A','T','E','C', + 'R','E','A','T','E','C','U','R','R','E','N','T','_','D','A','T','E','D', + 'E','T','A','C','H','I','M','M','E','D','I','A','T','E','J','O','I','N', + 'S','E','R','T','L','I','K','E','M','A','T','C','H','P','L','A','N','A', + 'L','Y','Z','E','P','R','A','G','M','A','B','O','R','T','V','A','L','U', + 'E','S','V','I','R','T','U','A','L','I','M','I','T','W','H','E','N','O', + 'T','N','U','L','L','W','H','E','R','E','C','U','R','S','I','V','E','A', + 'F','T','E','R','E','N','A','M','E','A','N','D','E','F','A','U','L','T', + 'A','U','T','O','I','N','C','R','E','M','E','N','T','C','A','S','T','C', + 'O','L','U','M','N','C','O','M','M','I','T','C','O','N','F','L','I','C', + 'T','C','R','O','S','S','C','U','R','R','E','N','T','_','T','I','M','E', + 'S','T','A','M','P','A','R','T','I','T','I','O','N','D','E','F','E','R', + 'R','E','D','I','S','T','I','N','C','T','D','R','O','P','R','E','C','E', + 'D','I','N','G','F','A','I','L','F','I','L','T','E','R','E','P','L','A', + 'C','E','F','O','L','L','O','W','I','N','G','F','R','O','M','F','U','L', + 'L','I','F','I','S','N','U','L','L','O','R','D','E','R','E','S','T','R', + 'I','C','T','O','V','E','R','I','G','H','T','R','O','L','L','B','A','C', + 'K','R','O','W','S','U','N','B','O','U','N','D','E','D','U','N','I','O', + 'N','U','S','I','N','G','V','A','C','U','U','M','V','I','E','W','I','N', + 'D','O','W','I','N','I','T','I','A','L','L','Y','P','R','I','M','A','R', + 'Y', }; /* aKWHash[i] is the hash value for the i-th keyword */ static const unsigned char aKWHash[127] = { - 76, 105, 117, 74, 0, 45, 0, 0, 82, 0, 77, 0, 0, - 42, 12, 78, 15, 0, 116, 85, 54, 112, 0, 19, 0, 0, - 121, 0, 119, 115, 0, 22, 93, 0, 9, 0, 0, 70, 71, - 0, 69, 6, 0, 48, 90, 102, 0, 118, 101, 0, 0, 44, - 0, 103, 24, 0, 17, 0, 122, 53, 23, 0, 5, 110, 25, - 96, 0, 0, 124, 106, 60, 123, 57, 28, 55, 0, 91, 0, - 100, 26, 0, 99, 0, 0, 0, 95, 92, 97, 88, 109, 14, - 39, 108, 0, 81, 0, 18, 89, 111, 32, 0, 120, 80, 113, - 62, 46, 84, 0, 0, 94, 40, 59, 114, 0, 36, 0, 0, - 29, 0, 86, 63, 64, 0, 20, 61, 0, 56, + 74, 109, 124, 72, 106, 45, 0, 0, 81, 0, 76, 61, 0, + 42, 12, 77, 15, 0, 123, 84, 54, 118, 125, 19, 0, 0, + 130, 0, 128, 121, 0, 22, 96, 0, 9, 0, 0, 115, 69, + 0, 67, 6, 0, 48, 93, 136, 0, 126, 104, 0, 0, 44, + 0, 107, 24, 0, 17, 0, 131, 53, 23, 0, 5, 62, 132, + 99, 0, 0, 135, 110, 60, 134, 57, 113, 55, 0, 94, 0, + 103, 26, 0, 102, 0, 0, 0, 98, 95, 100, 105, 117, 14, + 39, 116, 0, 80, 0, 133, 114, 92, 59, 0, 129, 79, 119, + 86, 46, 83, 0, 0, 97, 40, 122, 120, 0, 127, 0, 0, + 29, 0, 89, 87, 88, 0, 20, 85, 111, 56, }; /* aKWNext[] forms the hash collision chain. If aKWHash[i]==0 ** then the i-th keyword has no more hash collisions. Otherwise, ** the next keyword with the same hash is aKWHash[i]-1. */ -static const unsigned char aKWNext[124] = { +static const unsigned char aKWNext[136] = { 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 33, 0, 21, 0, 0, 0, 0, 0, 50, - 0, 43, 3, 47, 0, 0, 0, 0, 30, 0, 58, 0, 38, - 0, 0, 0, 1, 66, 0, 0, 67, 0, 41, 0, 0, 0, - 0, 0, 0, 49, 65, 0, 0, 0, 0, 31, 52, 16, 34, - 10, 0, 0, 0, 0, 0, 0, 0, 11, 72, 79, 0, 8, - 0, 104, 98, 0, 107, 0, 87, 0, 75, 51, 0, 27, 37, - 73, 83, 0, 35, 68, 0, 0, + 0, 43, 3, 47, 0, 0, 32, 0, 0, 0, 0, 0, 0, + 0, 1, 64, 0, 0, 65, 0, 41, 0, 38, 0, 0, 0, + 0, 0, 49, 75, 0, 0, 30, 0, 58, 0, 0, 0, 31, + 63, 16, 34, 10, 0, 0, 0, 0, 0, 0, 0, 11, 70, + 91, 0, 0, 8, 0, 108, 0, 101, 28, 52, 68, 0, 112, + 0, 73, 51, 0, 90, 27, 37, 0, 71, 36, 82, 0, 35, + 66, 25, 18, 0, 0, 78, }; /* aKWLen[i] is the length (in bytes) of the i-th keyword */ -static const unsigned char aKWLen[124] = { +static const unsigned char aKWLen[136] = { 7, 7, 5, 4, 6, 4, 5, 3, 6, 7, 3, 6, 6, 7, 7, 3, 8, 2, 6, 5, 4, 4, 3, 10, 4, 6, 11, 6, 2, 7, 5, 5, 9, 6, 9, 9, 7, 10, 10, 4, 6, 2, 3, 9, 4, 2, 6, 5, 7, 4, 5, 7, - 6, 6, 5, 6, 5, 5, 9, 7, 7, 3, 2, 4, 4, - 7, 3, 6, 4, 7, 6, 12, 6, 9, 4, 6, 5, 4, - 7, 6, 5, 6, 7, 5, 4, 5, 6, 5, 7, 3, 7, - 13, 2, 2, 4, 6, 6, 8, 5, 17, 12, 7, 8, 8, - 2, 4, 4, 4, 4, 4, 2, 2, 6, 5, 8, 5, 8, - 3, 5, 5, 6, 4, 9, 3, + 6, 6, 5, 6, 5, 5, 5, 7, 7, 4, 2, 7, 3, + 6, 4, 7, 6, 12, 6, 9, 4, 6, 4, 5, 4, 7, + 6, 5, 6, 7, 5, 4, 7, 3, 2, 4, 5, 9, 5, + 6, 3, 7, 13, 2, 2, 4, 6, 6, 8, 5, 17, 12, + 7, 9, 8, 8, 2, 4, 9, 4, 6, 7, 9, 4, 4, + 2, 6, 5, 8, 4, 5, 8, 4, 3, 9, 5, 5, 6, + 4, 6, 2, 9, 3, 7, }; /* aKWOffset[i] is the index into zKWText[] of the start of ** the text for the i-th keyword. */ -static const unsigned short int aKWOffset[124] = { +static const unsigned short int aKWOffset[136] = { 0, 2, 2, 8, 9, 14, 16, 20, 23, 25, 25, 29, 33, 36, 41, 46, 48, 53, 54, 59, 62, 65, 67, 69, 78, 81, 86, 91, 95, 96, 101, 105, 109, 117, 122, 128, 136, 142, 152, 159, 162, 162, 165, 167, 167, 171, 176, 179, 184, 184, 188, 192, - 199, 204, 209, 212, 218, 221, 225, 234, 240, 240, 240, 243, 246, - 250, 251, 255, 261, 265, 272, 278, 290, 296, 305, 307, 313, 318, - 320, 327, 332, 337, 343, 349, 354, 358, 361, 367, 371, 378, 380, - 387, 389, 391, 400, 404, 410, 416, 424, 429, 429, 445, 452, 459, - 460, 467, 471, 475, 479, 483, 486, 488, 490, 496, 500, 508, 513, - 521, 524, 529, 534, 540, 544, 549, + 199, 204, 209, 212, 218, 221, 225, 230, 236, 242, 245, 247, 248, + 252, 258, 262, 269, 275, 287, 293, 302, 304, 310, 314, 319, 321, + 328, 333, 338, 344, 350, 355, 358, 358, 358, 361, 365, 368, 377, + 381, 387, 389, 396, 398, 400, 409, 413, 419, 425, 433, 438, 438, + 438, 454, 463, 470, 471, 478, 481, 490, 494, 499, 506, 515, 519, + 523, 525, 531, 535, 543, 546, 551, 559, 559, 563, 572, 577, 582, + 588, 591, 594, 597, 602, 606, }; /* aKWCode[i] is the parser symbol code for the i-th keyword */ -static const unsigned char aKWCode[124] = { +static const unsigned char aKWCode[136] = { TK_REINDEX, TK_INDEXED, TK_INDEX, TK_DESC, TK_ESCAPE, TK_EACH, TK_CHECK, TK_KEY, TK_BEFORE, TK_FOREIGN, TK_FOR, TK_IGNORE, TK_LIKE_KW, TK_EXPLAIN, TK_INSTEAD, @@ -140560,20 +151496,23 @@ TK_OFFSET, TK_OF, TK_SET, TK_TEMP, TK_TEMP, TK_OR, TK_UNIQUE, TK_QUERY, TK_WITHOUT, TK_WITH, TK_JOIN_KW, TK_RELEASE, TK_ATTACH, TK_HAVING, TK_GROUP, - TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RECURSIVE, TK_BETWEEN, - TK_NOTNULL, TK_NOT, TK_NO, TK_NULL, TK_LIKE_KW, - TK_CASCADE, TK_ASC, TK_DELETE, TK_CASE, TK_COLLATE, - TK_CREATE, TK_CTIME_KW, TK_DETACH, TK_IMMEDIATE, TK_JOIN, - TK_INSERT, TK_MATCH, TK_PLAN, TK_ANALYZE, TK_PRAGMA, - TK_ABORT, TK_VALUES, TK_VIRTUAL, TK_LIMIT, TK_WHEN, - TK_WHERE, TK_RENAME, TK_AFTER, TK_REPLACE, TK_AND, - TK_DEFAULT, TK_AUTOINCR, TK_TO, TK_IN, TK_CAST, - TK_COLUMNKW, TK_COMMIT, TK_CONFLICT, TK_JOIN_KW, TK_CTIME_KW, - TK_CTIME_KW, TK_PRIMARY, TK_DEFERRED, TK_DISTINCT, TK_IS, - TK_DROP, TK_FAIL, TK_FROM, TK_JOIN_KW, TK_LIKE_KW, - TK_BY, TK_IF, TK_ISNULL, TK_ORDER, TK_RESTRICT, - TK_JOIN_KW, TK_ROLLBACK, TK_ROW, TK_UNION, TK_USING, - TK_VACUUM, TK_VIEW, TK_INITIALLY, TK_ALL, + TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RANGE, TK_BETWEEN, + TK_NOTHING, TK_LIKE_KW, TK_BY, TK_CASCADE, TK_ASC, + TK_DELETE, TK_CASE, TK_COLLATE, TK_CREATE, TK_CTIME_KW, + TK_DETACH, TK_IMMEDIATE, TK_JOIN, TK_INSERT, TK_LIKE_KW, + TK_MATCH, TK_PLAN, TK_ANALYZE, TK_PRAGMA, TK_ABORT, + TK_VALUES, TK_VIRTUAL, TK_LIMIT, TK_WHEN, TK_NOTNULL, + TK_NOT, TK_NO, TK_NULL, TK_WHERE, TK_RECURSIVE, + TK_AFTER, TK_RENAME, TK_AND, TK_DEFAULT, TK_AUTOINCR, + TK_TO, TK_IN, TK_CAST, TK_COLUMNKW, TK_COMMIT, + TK_CONFLICT, TK_JOIN_KW, TK_CTIME_KW, TK_CTIME_KW, TK_CURRENT, + TK_PARTITION, TK_DEFERRED, TK_DISTINCT, TK_IS, TK_DROP, + TK_PRECEDING, TK_FAIL, TK_FILTER, TK_REPLACE, TK_FOLLOWING, + TK_FROM, TK_JOIN_KW, TK_IF, TK_ISNULL, TK_ORDER, + TK_RESTRICT, TK_OVER, TK_JOIN_KW, TK_ROLLBACK, TK_ROWS, + TK_ROW, TK_UNBOUNDED, TK_UNION, TK_USING, TK_VACUUM, + TK_VIEW, TK_WINDOW, TK_DO, TK_INITIALLY, TK_ALL, + TK_PRIMARY, }; /* Check to see if z[0..n-1] is a keyword. If it is, write the ** parser symbol code for that keyword into *pType. Always @@ -140652,72 +151591,84 @@ testcase( i==55 ); /* UPDATE */ testcase( i==56 ); /* BEGIN */ testcase( i==57 ); /* INNER */ - testcase( i==58 ); /* RECURSIVE */ + testcase( i==58 ); /* RANGE */ testcase( i==59 ); /* BETWEEN */ - testcase( i==60 ); /* NOTNULL */ - testcase( i==61 ); /* NOT */ - testcase( i==62 ); /* NO */ - testcase( i==63 ); /* NULL */ - testcase( i==64 ); /* LIKE */ - testcase( i==65 ); /* CASCADE */ - testcase( i==66 ); /* ASC */ - testcase( i==67 ); /* DELETE */ - testcase( i==68 ); /* CASE */ - testcase( i==69 ); /* COLLATE */ - testcase( i==70 ); /* CREATE */ - testcase( i==71 ); /* CURRENT_DATE */ - testcase( i==72 ); /* DETACH */ - testcase( i==73 ); /* IMMEDIATE */ - testcase( i==74 ); /* JOIN */ - testcase( i==75 ); /* INSERT */ - testcase( i==76 ); /* MATCH */ - testcase( i==77 ); /* PLAN */ - testcase( i==78 ); /* ANALYZE */ - testcase( i==79 ); /* PRAGMA */ - testcase( i==80 ); /* ABORT */ - testcase( i==81 ); /* VALUES */ - testcase( i==82 ); /* VIRTUAL */ - testcase( i==83 ); /* LIMIT */ - testcase( i==84 ); /* WHEN */ - testcase( i==85 ); /* WHERE */ - testcase( i==86 ); /* RENAME */ - testcase( i==87 ); /* AFTER */ - testcase( i==88 ); /* REPLACE */ - testcase( i==89 ); /* AND */ - testcase( i==90 ); /* DEFAULT */ - testcase( i==91 ); /* AUTOINCREMENT */ - testcase( i==92 ); /* TO */ - testcase( i==93 ); /* IN */ - testcase( i==94 ); /* CAST */ - testcase( i==95 ); /* COLUMN */ - testcase( i==96 ); /* COMMIT */ - testcase( i==97 ); /* CONFLICT */ - testcase( i==98 ); /* CROSS */ - testcase( i==99 ); /* CURRENT_TIMESTAMP */ - testcase( i==100 ); /* CURRENT_TIME */ - testcase( i==101 ); /* PRIMARY */ - testcase( i==102 ); /* DEFERRED */ - testcase( i==103 ); /* DISTINCT */ - testcase( i==104 ); /* IS */ - testcase( i==105 ); /* DROP */ - testcase( i==106 ); /* FAIL */ - testcase( i==107 ); /* FROM */ - testcase( i==108 ); /* FULL */ - testcase( i==109 ); /* GLOB */ - testcase( i==110 ); /* BY */ - testcase( i==111 ); /* IF */ - testcase( i==112 ); /* ISNULL */ - testcase( i==113 ); /* ORDER */ - testcase( i==114 ); /* RESTRICT */ - testcase( i==115 ); /* RIGHT */ - testcase( i==116 ); /* ROLLBACK */ - testcase( i==117 ); /* ROW */ - testcase( i==118 ); /* UNION */ - testcase( i==119 ); /* USING */ - testcase( i==120 ); /* VACUUM */ - testcase( i==121 ); /* VIEW */ - testcase( i==122 ); /* INITIALLY */ - testcase( i==123 ); /* ALL */ + testcase( i==60 ); /* NOTHING */ + testcase( i==61 ); /* GLOB */ + testcase( i==62 ); /* BY */ + testcase( i==63 ); /* CASCADE */ + testcase( i==64 ); /* ASC */ + testcase( i==65 ); /* DELETE */ + testcase( i==66 ); /* CASE */ + testcase( i==67 ); /* COLLATE */ + testcase( i==68 ); /* CREATE */ + testcase( i==69 ); /* CURRENT_DATE */ + testcase( i==70 ); /* DETACH */ + testcase( i==71 ); /* IMMEDIATE */ + testcase( i==72 ); /* JOIN */ + testcase( i==73 ); /* INSERT */ + testcase( i==74 ); /* LIKE */ + testcase( i==75 ); /* MATCH */ + testcase( i==76 ); /* PLAN */ + testcase( i==77 ); /* ANALYZE */ + testcase( i==78 ); /* PRAGMA */ + testcase( i==79 ); /* ABORT */ + testcase( i==80 ); /* VALUES */ + testcase( i==81 ); /* VIRTUAL */ + testcase( i==82 ); /* LIMIT */ + testcase( i==83 ); /* WHEN */ + testcase( i==84 ); /* NOTNULL */ + testcase( i==85 ); /* NOT */ + testcase( i==86 ); /* NO */ + testcase( i==87 ); /* NULL */ + testcase( i==88 ); /* WHERE */ + testcase( i==89 ); /* RECURSIVE */ + testcase( i==90 ); /* AFTER */ + testcase( i==91 ); /* RENAME */ + testcase( i==92 ); /* AND */ + testcase( i==93 ); /* DEFAULT */ + testcase( i==94 ); /* AUTOINCREMENT */ + testcase( i==95 ); /* TO */ + testcase( i==96 ); /* IN */ + testcase( i==97 ); /* CAST */ + testcase( i==98 ); /* COLUMN */ + testcase( i==99 ); /* COMMIT */ + testcase( i==100 ); /* CONFLICT */ + testcase( i==101 ); /* CROSS */ + testcase( i==102 ); /* CURRENT_TIMESTAMP */ + testcase( i==103 ); /* CURRENT_TIME */ + testcase( i==104 ); /* CURRENT */ + testcase( i==105 ); /* PARTITION */ + testcase( i==106 ); /* DEFERRED */ + testcase( i==107 ); /* DISTINCT */ + testcase( i==108 ); /* IS */ + testcase( i==109 ); /* DROP */ + testcase( i==110 ); /* PRECEDING */ + testcase( i==111 ); /* FAIL */ + testcase( i==112 ); /* FILTER */ + testcase( i==113 ); /* REPLACE */ + testcase( i==114 ); /* FOLLOWING */ + testcase( i==115 ); /* FROM */ + testcase( i==116 ); /* FULL */ + testcase( i==117 ); /* IF */ + testcase( i==118 ); /* ISNULL */ + testcase( i==119 ); /* ORDER */ + testcase( i==120 ); /* RESTRICT */ + testcase( i==121 ); /* OVER */ + testcase( i==122 ); /* RIGHT */ + testcase( i==123 ); /* ROLLBACK */ + testcase( i==124 ); /* ROWS */ + testcase( i==125 ); /* ROW */ + testcase( i==126 ); /* UNBOUNDED */ + testcase( i==127 ); /* UNION */ + testcase( i==128 ); /* USING */ + testcase( i==129 ); /* VACUUM */ + testcase( i==130 ); /* VIEW */ + testcase( i==131 ); /* WINDOW */ + testcase( i==132 ); /* DO */ + testcase( i==133 ); /* INITIALLY */ + testcase( i==134 ); /* ALL */ + testcase( i==135 ); /* PRIMARY */ *pType = aKWCode[i]; break; } @@ -140729,7 +151680,17 @@ keywordCode((char*)z, n, &id); return id; } -#define SQLITE_N_KEYWORD 124 +#define SQLITE_N_KEYWORD 136 +SQLITE_API int sqlite3_keyword_name(int i,const char **pzName,int *pnName){ + if( i<0 || i>=SQLITE_N_KEYWORD ) return SQLITE_ERROR; + *pzName = zKWText + aKWOffset[i]; + *pnName = aKWLen[i]; + return SQLITE_OK; +} +SQLITE_API int sqlite3_keyword_count(void){ return SQLITE_N_KEYWORD; } +SQLITE_API int sqlite3_keyword_check(const char *zName, int nName){ + return TK_ID!=sqlite3KeywordCode((const u8*)zName, nName); +} /************** End of keywordhash.h *****************************************/ /************** Continuing where we left off in tokenize.c *******************/ @@ -140773,13 +151734,87 @@ #define IdChar(C) (((c=C)>=0x42 && sqlite3IsEbcdicIdChar[c-0x40])) #endif -/* Make the IdChar function accessible from ctime.c */ -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS +/* Make the IdChar function accessible from ctime.c and alter.c */ SQLITE_PRIVATE int sqlite3IsIdChar(u8 c){ return IdChar(c); } -#endif +#ifndef SQLITE_OMIT_WINDOWFUNC +/* +** Return the id of the next token in string (*pz). Before returning, set +** (*pz) to point to the byte following the parsed token. +*/ +static int getToken(const unsigned char **pz){ + const unsigned char *z = *pz; + int t; /* Token type to return */ + do { + z += sqlite3GetToken(z, &t); + }while( t==TK_SPACE ); + if( t==TK_ID + || t==TK_STRING + || t==TK_JOIN_KW + || t==TK_WINDOW + || t==TK_OVER + || sqlite3ParserFallback(t)==TK_ID + ){ + t = TK_ID; + } + *pz = z; + return t; +} /* +** The following three functions are called immediately after the tokenizer +** reads the keywords WINDOW, OVER and FILTER, respectively, to determine +** whether the token should be treated as a keyword or an SQL identifier. +** This cannot be handled by the usual lemon %fallback method, due to +** the ambiguity in some constructions. e.g. +** +** SELECT sum(x) OVER ... +** +** In the above, "OVER" might be a keyword, or it might be an alias for the +** sum(x) expression. If a "%fallback ID OVER" directive were added to +** grammar, then SQLite would always treat "OVER" as an alias, making it +** impossible to call a window-function without a FILTER clause. +** +** WINDOW is treated as a keyword if: +** +** * the following token is an identifier, or a keyword that can fallback +** to being an identifier, and +** * the token after than one is TK_AS. +** +** OVER is a keyword if: +** +** * the previous token was TK_RP, and +** * the next token is either TK_LP or an identifier. +** +** FILTER is a keyword if: +** +** * the previous token was TK_RP, and +** * the next token is TK_LP. +*/ +static int analyzeWindowKeyword(const unsigned char *z){ + int t; + t = getToken(&z); + if( t!=TK_ID ) return TK_ID; + t = getToken(&z); + if( t!=TK_AS ) return TK_ID; + return TK_WINDOW; +} +static int analyzeOverKeyword(const unsigned char *z, int lastToken){ + if( lastToken==TK_RP ){ + int t = getToken(&z); + if( t==TK_LP || t==TK_ID ) return TK_OVER; + } + return TK_ID; +} +static int analyzeFilterKeyword(const unsigned char *z, int lastToken){ + if( lastToken==TK_RP && getToken(&z)==TK_LP ){ + return TK_FILTER; + } + return TK_ID; +} +#endif /* SQLITE_OMIT_WINDOWFUNC */ + +/* ** Return the length (in bytes) of the token that begins at z[0]. ** Store the token type in *tokenType before returning. */ @@ -141046,6 +152081,10 @@ i = 1; break; } + case CC_NUL: { + *tokenType = TK_ILLEGAL; + return 0; + } default: { *tokenType = TK_ILLEGAL; return 1; @@ -141056,7 +152095,74 @@ return i; } +#ifdef SQLITE_ENABLE_NORMALIZE /* +** Return the length (in bytes) of the token that begins at z[0]. +** Store the token type in *tokenType before returning. If flags has +** SQLITE_TOKEN_NORMALIZE flag enabled, use the identifier token type +** for keywords. Add SQLITE_TOKEN_QUOTED to flags if the token was +** actually a quoted identifier. Add SQLITE_TOKEN_KEYWORD to flags +** if the token was recognized as a keyword; this is useful when the +** SQLITE_TOKEN_NORMALIZE flag is used, because it enables the caller +** to differentiate between a keyword being treated as an identifier +** (for normalization purposes) and an actual identifier. +*/ +SQLITE_PRIVATE int sqlite3GetTokenNormalized( + const unsigned char *z, + int *tokenType, + int *flags +){ + int n; + unsigned char iClass = aiClass[*z]; + if( iClass==CC_KYWD ){ + int i; + for(i=1; aiClass[z[i]]<=CC_KYWD; i++){} + if( IdChar(z[i]) ){ + /* This token started out using characters that can appear in keywords, + ** but z[i] is a character not allowed within keywords, so this must + ** be an identifier instead */ + i++; + while( IdChar(z[i]) ){ i++; } + *tokenType = TK_ID; + return i; + } + *tokenType = TK_ID; + n = keywordCode((char*)z, i, tokenType); + /* If the token is no longer considered to be an identifier, then it is a + ** keyword of some kind. Make the token back into an identifier and then + ** set the SQLITE_TOKEN_KEYWORD flag. Several non-identifier tokens are + ** used verbatim, including IN, IS, NOT, and NULL. */ + switch( *tokenType ){ + case TK_ID: { + /* do nothing, handled by caller */ + break; + } + case TK_IN: + case TK_IS: + case TK_NOT: + case TK_NULL: { + *flags |= SQLITE_TOKEN_KEYWORD; + break; + } + default: { + *tokenType = TK_ID; + *flags |= SQLITE_TOKEN_KEYWORD; + break; + } + } + }else{ + n = sqlite3GetToken(z, tokenType); + /* If the token is considered to be an identifier and the character class + ** of the first character is a quote, set the SQLITE_TOKEN_QUOTED flag. */ + if( *tokenType==TK_ID && (iClass==CC_QUOTE || iClass==CC_QUOTE2) ){ + *flags |= SQLITE_TOKEN_QUOTED; + } + } + return n; +} +#endif /* SQLITE_ENABLE_NORMALIZE */ + +/* ** Run the parser on the given SQL string. The parser structure is ** passed in. An SQLITE_ status code is returned. If an error occurs ** then an and attempt is made to write an error message into @@ -141086,9 +152192,9 @@ /* sqlite3ParserTrace(stdout, "parser: "); */ #ifdef sqlite3Parser_ENGINEALWAYSONSTACK pEngine = &sEngine; - sqlite3ParserInit(pEngine); + sqlite3ParserInit(pEngine, pParse); #else - pEngine = sqlite3ParserAlloc(sqlite3Malloc); + pEngine = sqlite3ParserAlloc(sqlite3Malloc, pParse); if( pEngine==0 ){ sqlite3OomFault(db); return SQLITE_NOMEM_BKPT; @@ -141099,47 +152205,64 @@ assert( pParse->nVar==0 ); assert( pParse->pVList==0 ); while( 1 ){ - if( zSql[0]!=0 ){ - n = sqlite3GetToken((u8*)zSql, &tokenType); - mxSqlLen -= n; - if( mxSqlLen<0 ){ - pParse->rc = SQLITE_TOOBIG; - break; - } - }else{ - /* Upon reaching the end of input, call the parser two more times - ** with tokens TK_SEMI and 0, in that order. */ - if( lastTokenParsed==TK_SEMI ){ - tokenType = 0; - }else if( lastTokenParsed==0 ){ - break; - }else{ - tokenType = TK_SEMI; - } - zSql -= n; + n = sqlite3GetToken((u8*)zSql, &tokenType); + mxSqlLen -= n; + if( mxSqlLen<0 ){ + pParse->rc = SQLITE_TOOBIG; + break; } +#ifndef SQLITE_OMIT_WINDOWFUNC + if( tokenType>=TK_WINDOW ){ + assert( tokenType==TK_SPACE || tokenType==TK_OVER || tokenType==TK_FILTER + || tokenType==TK_ILLEGAL || tokenType==TK_WINDOW + ); +#else if( tokenType>=TK_SPACE ){ assert( tokenType==TK_SPACE || tokenType==TK_ILLEGAL ); +#endif /* SQLITE_OMIT_WINDOWFUNC */ if( db->u1.isInterrupted ){ pParse->rc = SQLITE_INTERRUPT; break; } - if( tokenType==TK_ILLEGAL ){ + if( tokenType==TK_SPACE ){ + zSql += n; + continue; + } + if( zSql[0]==0 ){ + /* Upon reaching the end of input, call the parser two more times + ** with tokens TK_SEMI and 0, in that order. */ + if( lastTokenParsed==TK_SEMI ){ + tokenType = 0; + }else if( lastTokenParsed==0 ){ + break; + }else{ + tokenType = TK_SEMI; + } + n = 0; +#ifndef SQLITE_OMIT_WINDOWFUNC + }else if( tokenType==TK_WINDOW ){ + assert( n==6 ); + tokenType = analyzeWindowKeyword((const u8*)&zSql[6]); + }else if( tokenType==TK_OVER ){ + assert( n==4 ); + tokenType = analyzeOverKeyword((const u8*)&zSql[4], lastTokenParsed); + }else if( tokenType==TK_FILTER ){ + assert( n==6 ); + tokenType = analyzeFilterKeyword((const u8*)&zSql[6], lastTokenParsed); +#endif /* SQLITE_OMIT_WINDOWFUNC */ + }else{ sqlite3ErrorMsg(pParse, "unrecognized token: \"%.*s\"", n, zSql); break; } - zSql += n; - }else{ - pParse->sLastToken.z = zSql; - pParse->sLastToken.n = n; - sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse); - lastTokenParsed = tokenType; - zSql += n; - if( pParse->rc!=SQLITE_OK || db->mallocFailed ) break; } + pParse->sLastToken.z = zSql; + pParse->sLastToken.n = n; + sqlite3Parser(pEngine, tokenType, pParse->sLastToken); + lastTokenParsed = tokenType; + zSql += n; + if( pParse->rc!=SQLITE_OK || db->mallocFailed ) break; } assert( nErr==0 ); - pParse->zTail = zSql; #ifdef YYTRACKMAXSTACKDEPTH sqlite3_mutex_enter(sqlite3MallocMutex()); sqlite3StatusHighwater(SQLITE_STATUS_PARSER_STACK, @@ -141161,10 +152284,12 @@ assert( pzErrMsg!=0 ); if( pParse->zErrMsg ){ *pzErrMsg = pParse->zErrMsg; - sqlite3_log(pParse->rc, "%s", *pzErrMsg); + sqlite3_log(pParse->rc, "%s in \"%s\"", + *pzErrMsg, pParse->zTail); pParse->zErrMsg = 0; nErr++; } + pParse->zTail = zSql; if( pParse->pVdbe && pParse->nErr>0 && pParse->nested==0 ){ sqlite3VdbeDelete(pParse->pVdbe); pParse->pVdbe = 0; @@ -141180,7 +152305,7 @@ sqlite3_free(pParse->apVtabLock); #endif - if( !IN_DECLARE_VTAB ){ + if( !IN_SPECIAL_PARSE ){ /* If the pParse->declareVtab flag is set, do not delete any table ** structure built up in pParse->pNewTable. The calling code (see vtab.c) ** will take responsibility for freeing the Table structure. @@ -141187,9 +152312,11 @@ */ sqlite3DeleteTable(db, pParse->pNewTable); } + if( !IN_RENAME_OBJECT ){ + sqlite3DeleteTrigger(db, pParse->pNewTrigger); + } if( pParse->pWithToFree ) sqlite3WithDelete(db, pParse->pWithToFree); - sqlite3DeleteTrigger(db, pParse->pNewTrigger); sqlite3DbFree(db, pParse->pVList); while( pParse->pAinc ){ AutoincInfo *p = pParse->pAinc; @@ -141571,6 +152698,10 @@ */ /* #include "sqlite3.h" */ +#ifdef SQLITE_OMIT_VIRTUALTABLE +# undef SQLITE_ENABLE_RTREE +#endif + #if 0 extern "C" { #endif /* __cplusplus */ @@ -141584,7 +152715,7 @@ /************** End of rtree.h ***********************************************/ /************** Continuing where we left off in main.c ***********************/ #endif -#ifdef SQLITE_ENABLE_ICU +#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS) /************** Include sqliteicu.h in the middle of main.c ******************/ /************** Begin file sqliteicu.h ***************************************/ /* @@ -141640,11 +152771,13 @@ */ SQLITE_API const char *sqlite3_libversion(void){ return sqlite3_version; } -/* IMPLEMENTATION-OF: R-63124-39300 The sqlite3_sourceid() function returns a +/* IMPLEMENTATION-OF: R-25063-23286 The sqlite3_sourceid() function returns a ** pointer to a string constant whose value is the same as the -** SQLITE_SOURCE_ID C preprocessor macro. +** SQLITE_SOURCE_ID C preprocessor macro. Except if SQLite is built using +** an edited copy of the amalgamation, then the last four characters of +** the hash might be different from SQLITE_SOURCE_ID. */ -SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } +/* SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } */ /* IMPLEMENTATION-OF: R-35210-63508 The sqlite3_libversion_number() function ** returns an integer equal to SQLITE_VERSION_NUMBER. @@ -141830,7 +152963,12 @@ sqlite3GlobalConfig.isPCacheInit = 1; rc = sqlite3OsInit(); } +#ifdef SQLITE_ENABLE_DESERIALIZE if( rc==SQLITE_OK ){ + rc = sqlite3MemdbInit(); + } +#endif + if( rc==SQLITE_OK ){ sqlite3PCacheBufferSetup( sqlite3GlobalConfig.pPage, sqlite3GlobalConfig.szPage, sqlite3GlobalConfig.nPage); sqlite3GlobalConfig.isInit = 1; @@ -141862,7 +153000,7 @@ #ifndef NDEBUG #ifndef SQLITE_OMIT_FLOATING_POINT /* This section of code's only "output" is via assert() statements. */ - if ( rc==SQLITE_OK ){ + if( rc==SQLITE_OK ){ u64 x = (((u64)1)<<63)-1; double y; assert(sizeof(x)==8); @@ -142029,14 +153167,8 @@ sqlite3GlobalConfig.bMemstat = va_arg(ap, int); break; } - case SQLITE_CONFIG_SCRATCH: { - /* EVIDENCE-OF: R-08404-60887 There are three arguments to - ** SQLITE_CONFIG_SCRATCH: A pointer an 8-byte aligned memory buffer from - ** which the scratch allocations will be drawn, the size of each scratch - ** allocation (sz), and the maximum number of scratch allocations (N). */ - sqlite3GlobalConfig.pScratch = va_arg(ap, void*); - sqlite3GlobalConfig.szScratch = va_arg(ap, int); - sqlite3GlobalConfig.nScratch = va_arg(ap, int); + case SQLITE_CONFIG_SMALL_MALLOC: { + sqlite3GlobalConfig.bSmallMalloc = va_arg(ap, int); break; } case SQLITE_CONFIG_PAGECACHE: { @@ -142234,6 +153366,17 @@ break; } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + case SQLITE_CONFIG_SORTERREF_SIZE: { + int iVal = va_arg(ap, int); + if( iVal<0 ){ + iVal = SQLITE_DEFAULT_SORTERREF_SIZE; + } + sqlite3GlobalConfig.szSorterRef = (u32)iVal; + break; + } +#endif /* SQLITE_ENABLE_SORTER_REFERENCES */ + default: { rc = SQLITE_ERROR; break; @@ -142257,7 +153400,8 @@ static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){ #ifndef SQLITE_OMIT_LOOKASIDE void *pStart; - if( db->lookaside.nOut ){ + + if( sqlite3LookasideUsed(db,0)>0 ){ return SQLITE_BUSY; } /* Free any existing lookaside buffer for this handle before @@ -142285,6 +153429,7 @@ pStart = pBuf; } db->lookaside.pStart = pStart; + db->lookaside.pInit = 0; db->lookaside.pFree = 0; db->lookaside.sz = (u16)sz; if( pStart ){ @@ -142291,10 +153436,11 @@ int i; LookasideSlot *p; assert( sz > (int)sizeof(LookasideSlot*) ); + db->lookaside.nSlot = cnt; p = (LookasideSlot*)pStart; for(i=cnt-1; i>=0; i--){ - p->pNext = db->lookaside.pFree; - db->lookaside.pFree = p; + p->pNext = db->lookaside.pInit; + db->lookaside.pInit = p; p = (LookasideSlot*)&((u8*)p)[sz]; } db->lookaside.pEnd = p; @@ -142305,6 +153451,7 @@ db->lookaside.pEnd = db; db->lookaside.bDisable = 1; db->lookaside.bMalloced = 0; + db->lookaside.nSlot = 0; } #endif /* SQLITE_OMIT_LOOKASIDE */ return SQLITE_OK; @@ -142410,6 +153557,9 @@ { SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, SQLITE_LoadExtension }, { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE, SQLITE_NoCkptOnClose }, { SQLITE_DBCONFIG_ENABLE_QPSG, SQLITE_EnableQPSG }, + { SQLITE_DBCONFIG_TRIGGER_EQP, SQLITE_TriggerEQP }, + { SQLITE_DBCONFIG_RESET_DATABASE, SQLITE_ResetDatabase }, + { SQLITE_DBCONFIG_DEFENSIVE, SQLITE_Defensive }, }; unsigned int i; rc = SQLITE_ERROR; /* IMP: R-42790-23372 */ @@ -142417,7 +153567,7 @@ if( aFlagOp[i].op==op ){ int onoff = va_arg(ap, int); int *pRes = va_arg(ap, int*); - int oldFlags = db->flags; + u32 oldFlags = db->flags; if( onoff>0 ){ db->flags |= aFlagOp[i].mask; }else if( onoff==0 ){ @@ -142424,7 +153574,7 @@ db->flags &= ~aFlagOp[i].mask; } if( oldFlags!=db->flags ){ - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, 0); } if( pRes ){ *pRes = (db->flags & aFlagOp[i].mask)!=0; @@ -142486,6 +153636,15 @@ } /* +** Return true if CollSeq is the default built-in BINARY. +*/ +SQLITE_PRIVATE int sqlite3IsBinary(const CollSeq *p){ + assert( p==0 || p->xCmp!=binCollFunc || p->pUser!=0 + || strcmp(p->zName,"BINARY")==0 ); + return p==0 || (p->xCmp==binCollFunc && p->pUser==0); +} + +/* ** Another built-in collating sequence: NOCASE. ** ** This collating sequence is intended to be used for "case independent @@ -142606,7 +153765,7 @@ sqlite3BtreeEnterAll(db); for(i=0; inDb; i++){ Schema *pSchema = db->aDb[i].pSchema; - if( db->aDb[i].pSchema ){ + if( pSchema ){ for(p=sqliteHashFirst(&pSchema->tblHash); p; p=sqliteHashNext(p)){ Table *pTab = (Table *)sqliteHashData(p); if( IsVirtual(pTab) ) sqlite3VtabDisconnect(db, pTab); @@ -142824,7 +153983,7 @@ sqlite3_mutex_leave(db->mutex); db->magic = SQLITE_MAGIC_CLOSED; sqlite3_mutex_free(db->mutex); - assert( db->lookaside.nOut==0 ); /* Fails on a lookaside memory leak */ + assert( sqlite3LookasideUsed(db,0)==0 ); if( db->lookaside.bMalloced ){ sqlite3_free(db->lookaside.pStart); } @@ -142852,7 +154011,7 @@ ** the database rollback and schema reset, which can cause false ** corruption reports in some cases. */ sqlite3BtreeEnterAll(db); - schemaChange = (db->flags & SQLITE_InternChanges)!=0 && db->init.busy==0; + schemaChange = (db->mDbFlags & DBFLAG_SchemaChange)!=0 && db->init.busy==0; for(i=0; inDb; i++){ Btree *p = db->aDb[i].pBt; @@ -142866,8 +154025,8 @@ sqlite3VtabRollback(db); sqlite3EndBenignMalloc(); - if( (db->flags&SQLITE_InternChanges)!=0 && db->init.busy==0 ){ - sqlite3ExpirePreparedStatements(db); + if( schemaChange ){ + sqlite3ExpirePreparedStatements(db, 0); sqlite3ResetAllSchemasOfConnection(db); } sqlite3BtreeLeaveAll(db); @@ -142895,6 +154054,7 @@ switch( rc ){ case SQLITE_OK: zName = "SQLITE_OK"; break; case SQLITE_ERROR: zName = "SQLITE_ERROR"; break; + case SQLITE_ERROR_SNAPSHOT: zName = "SQLITE_ERROR_SNAPSHOT"; break; case SQLITE_INTERNAL: zName = "SQLITE_INTERNAL"; break; case SQLITE_PERM: zName = "SQLITE_PERM"; break; case SQLITE_ABORT: zName = "SQLITE_ABORT"; break; @@ -142907,9 +154067,10 @@ case SQLITE_NOMEM: zName = "SQLITE_NOMEM"; break; case SQLITE_READONLY: zName = "SQLITE_READONLY"; break; case SQLITE_READONLY_RECOVERY: zName = "SQLITE_READONLY_RECOVERY"; break; - case SQLITE_READONLY_CANTLOCK: zName = "SQLITE_READONLY_CANTLOCK"; break; + case SQLITE_READONLY_CANTINIT: zName = "SQLITE_READONLY_CANTINIT"; break; case SQLITE_READONLY_ROLLBACK: zName = "SQLITE_READONLY_ROLLBACK"; break; case SQLITE_READONLY_DBMOVED: zName = "SQLITE_READONLY_DBMOVED"; break; + case SQLITE_READONLY_DIRECTORY: zName = "SQLITE_READONLY_DIRECTORY";break; case SQLITE_INTERRUPT: zName = "SQLITE_INTERRUPT"; break; case SQLITE_IOERR: zName = "SQLITE_IOERR"; break; case SQLITE_IOERR_READ: zName = "SQLITE_IOERR_READ"; break; @@ -143029,6 +154190,8 @@ /* SQLITE_FORMAT */ 0, /* SQLITE_RANGE */ "column index out of range", /* SQLITE_NOTADB */ "file is not a database", + /* SQLITE_NOTICE */ "notification message", + /* SQLITE_WARNING */ "warning message", }; const char *zErr = "unknown error"; switch( rc ){ @@ -143036,6 +154199,14 @@ zErr = "abort due to ROLLBACK"; break; } + case SQLITE_ROW: { + zErr = "another row available"; + break; + } + case SQLITE_DONE: { + zErr = "no more rows available"; + break; + } default: { rc &= 0xff; if( ALWAYS(rc>=0) && rcbusyTimeout; + int tmout = db->busyTimeout; int delay, prior; +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT + if( sqlite3OsFileControl(pFile,SQLITE_FCNTL_LOCK_TIMEOUT,&tmout)==SQLITE_OK ){ + if( count ){ + tmout = 0; + sqlite3OsFileControl(pFile, SQLITE_FCNTL_LOCK_TIMEOUT, &tmout); + return 0; + }else{ + return 1; + } + } +#else + UNUSED_PARAMETER(pFile); +#endif assert( count>=0 ); if( count < NDELAY ){ delay = delays[count]; @@ -143075,16 +154265,19 @@ delay = delays[NDELAY-1]; prior = totals[NDELAY-1] + delay*(count-(NDELAY-1)); } - if( prior + delay > timeout ){ - delay = timeout - prior; + if( prior + delay > tmout ){ + delay = tmout - prior; if( delay<=0 ) return 0; } sqlite3OsSleep(db->pVfs, delay*1000); return 1; #else + /* This case for unix systems that lack usleep() support. Sleeping + ** must be done in increments of whole seconds */ sqlite3 *db = (sqlite3 *)ptr; - int timeout = ((sqlite3 *)ptr)->busyTimeout; - if( (count+1)*1000 > timeout ){ + int tmout = ((sqlite3 *)ptr)->busyTimeout; + UNUSED_PARAMETER(pFile); + if( (count+1)*1000 > tmout ){ return 0; } sqlite3OsSleep(db->pVfs, 1000000); @@ -143095,14 +154288,25 @@ /* ** Invoke the given busy handler. ** -** This routine is called when an operation failed with a lock. +** This routine is called when an operation failed to acquire a +** lock on VFS file pFile. +** ** If this routine returns non-zero, the lock is retried. If it ** returns 0, the operation aborts with an SQLITE_BUSY error. */ -SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p){ +SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p, sqlite3_file *pFile){ int rc; - if( NEVER(p==0) || p->xFunc==0 || p->nBusy<0 ) return 0; - rc = p->xFunc(p->pArg, p->nBusy); + if( p->xBusyHandler==0 || p->nBusy<0 ) return 0; + if( p->bExtraFileArg ){ + /* Add an extra parameter with the pFile pointer to the end of the + ** callback argument list */ + int (*xTra)(void*,int,sqlite3_file*); + xTra = (int(*)(void*,int,sqlite3_file*))p->xBusyHandler; + rc = xTra(p->pBusyArg, p->nBusy, pFile); + }else{ + /* Legacy style busy handler callback */ + rc = p->xBusyHandler(p->pBusyArg, p->nBusy); + } if( rc==0 ){ p->nBusy = -1; }else{ @@ -143124,9 +154328,10 @@ if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; #endif sqlite3_mutex_enter(db->mutex); - db->busyHandler.xFunc = xBusy; - db->busyHandler.pArg = pArg; + db->busyHandler.xBusyHandler = xBusy; + db->busyHandler.pBusyArg = pArg; db->busyHandler.nBusy = 0; + db->busyHandler.bExtraFileArg = 0; db->busyTimeout = 0; sqlite3_mutex_leave(db->mutex); return SQLITE_OK; @@ -143174,8 +154379,10 @@ if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; #endif if( ms>0 ){ - sqlite3_busy_handler(db, sqliteDefaultBusyCallback, (void*)db); + sqlite3_busy_handler(db, (int(*)(void*,int))sqliteDefaultBusyCallback, + (void*)db); db->busyTimeout = ms; + db->busyHandler.bExtraFileArg = 1; }else{ sqlite3_busy_handler(db, 0, 0); } @@ -143211,6 +154418,8 @@ void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), void (*xStep)(sqlite3_context*,int,sqlite3_value **), void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value **), FuncDestructor *pDestructor ){ FuncDef *p; @@ -143218,12 +154427,14 @@ int extraFlags; assert( sqlite3_mutex_held(db->mutex) ); - if( zFunctionName==0 || - (xSFunc && (xFinal || xStep)) || - (!xSFunc && (xFinal && !xStep)) || - (!xSFunc && (!xFinal && xStep)) || - (nArg<-1 || nArg>SQLITE_MAX_FUNCTION_ARG) || - (255<(nName = sqlite3Strlen30( zFunctionName))) ){ + assert( xValue==0 || xSFunc==0 ); + if( zFunctionName==0 /* Must have a valid name */ + || (xSFunc!=0 && xFinal!=0) /* Not both xSFunc and xFinal */ + || ((xFinal==0)!=(xStep==0)) /* Both or neither of xFinal and xStep */ + || ((xValue==0)!=(xInverse==0)) /* Both or neither of xValue, xInverse */ + || (nArg<-1 || nArg>SQLITE_MAX_FUNCTION_ARG) + || (255<(nName = sqlite3Strlen30( zFunctionName))) + ){ return SQLITE_MISUSE_BKPT; } @@ -143244,10 +154455,10 @@ }else if( enc==SQLITE_ANY ){ int rc; rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF8|extraFlags, - pUserData, xSFunc, xStep, xFinal, pDestructor); + pUserData, xSFunc, xStep, xFinal, xValue, xInverse, pDestructor); if( rc==SQLITE_OK ){ rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF16LE|extraFlags, - pUserData, xSFunc, xStep, xFinal, pDestructor); + pUserData, xSFunc, xStep, xFinal, xValue, xInverse, pDestructor); } if( rc!=SQLITE_OK ){ return rc; @@ -143264,7 +154475,7 @@ ** operation to continue but invalidate all precompiled statements. */ p = sqlite3FindFunction(db, zFunctionName, nArg, (u8)enc, 0); - if( p && (p->funcFlags & SQLITE_FUNC_ENCMASK)==enc && p->nArg==nArg ){ + if( p && (p->funcFlags & SQLITE_FUNC_ENCMASK)==(u32)enc && p->nArg==nArg ){ if( db->nVdbeActive ){ sqlite3ErrorWithMsg(db, SQLITE_BUSY, "unable to delete/modify user-function due to active statements"); @@ -143271,7 +154482,7 @@ assert( !db->mallocFailed ); return SQLITE_BUSY; }else{ - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, 0); } } @@ -143293,6 +154504,8 @@ testcase( p->funcFlags & SQLITE_DETERMINISTIC ); p->xSFunc = xSFunc ? xSFunc : xStep; p->xFinalize = xFinal; + p->xValue = xValue; + p->xInverse = xInverse; p->pUserData = pUserData; p->nArg = (u16)nArg; return SQLITE_OK; @@ -143299,32 +154512,24 @@ } /* -** Create new user functions. +** Worker function used by utf-8 APIs that create new functions: +** +** sqlite3_create_function() +** sqlite3_create_function_v2() +** sqlite3_create_window_function() */ -SQLITE_API int sqlite3_create_function( +static int createFunctionApi( sqlite3 *db, const char *zFunc, int nArg, int enc, void *p, - void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), - void (*xStep)(sqlite3_context*,int,sqlite3_value **), - void (*xFinal)(sqlite3_context*) -){ - return sqlite3_create_function_v2(db, zFunc, nArg, enc, p, xSFunc, xStep, - xFinal, 0); -} - -SQLITE_API int sqlite3_create_function_v2( - sqlite3 *db, - const char *zFunc, - int nArg, - int enc, - void *p, - void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), - void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xSFunc)(sqlite3_context*,int,sqlite3_value**), + void (*xStep)(sqlite3_context*,int,sqlite3_value**), void (*xFinal)(sqlite3_context*), - void (*xDestroy)(void *) + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value**), + void(*xDestroy)(void*) ){ int rc = SQLITE_ERROR; FuncDestructor *pArg = 0; @@ -143336,19 +154541,23 @@ #endif sqlite3_mutex_enter(db->mutex); if( xDestroy ){ - pArg = (FuncDestructor *)sqlite3DbMallocZero(db, sizeof(FuncDestructor)); + pArg = (FuncDestructor *)sqlite3Malloc(sizeof(FuncDestructor)); if( !pArg ){ + sqlite3OomFault(db); xDestroy(p); goto out; } + pArg->nRef = 0; pArg->xDestroy = xDestroy; pArg->pUserData = p; } - rc = sqlite3CreateFunc(db, zFunc, nArg, enc, p, xSFunc, xStep, xFinal, pArg); + rc = sqlite3CreateFunc(db, zFunc, nArg, enc, p, + xSFunc, xStep, xFinal, xValue, xInverse, pArg + ); if( pArg && pArg->nRef==0 ){ assert( rc!=SQLITE_OK ); xDestroy(p); - sqlite3DbFree(db, pArg); + sqlite3_free(pArg); } out: @@ -143357,6 +154566,52 @@ return rc; } +/* +** Create new user functions. +*/ +SQLITE_API int sqlite3_create_function( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*) +){ + return createFunctionApi(db, zFunc, nArg, enc, p, xSFunc, xStep, + xFinal, 0, 0, 0); +} +SQLITE_API int sqlite3_create_function_v2( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*), + void (*xDestroy)(void *) +){ + return createFunctionApi(db, zFunc, nArg, enc, p, xSFunc, xStep, + xFinal, 0, 0, xDestroy); +} +SQLITE_API int sqlite3_create_window_function( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value **), + void (*xDestroy)(void *) +){ + return createFunctionApi(db, zFunc, nArg, enc, p, 0, xStep, + xFinal, xValue, xInverse, xDestroy); +} + #ifndef SQLITE_OMIT_UTF16 SQLITE_API int sqlite3_create_function16( sqlite3 *db, @@ -143377,7 +154632,7 @@ sqlite3_mutex_enter(db->mutex); assert( !db->mallocFailed ); zFunc8 = sqlite3Utf16to8(db, zFunctionName, -1, SQLITE_UTF16NATIVE); - rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xSFunc,xStep,xFinal,0); + rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xSFunc,xStep,xFinal,0,0,0); sqlite3DbFree(db, zFunc8); rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); @@ -143387,6 +154642,28 @@ /* +** The following is the implementation of an SQL function that always +** fails with an error message stating that the function is used in the +** wrong context. The sqlite3_overload_function() API might construct +** SQL function that use this routine so that the functions will exist +** for name resolution but are actually overloaded by the xFindFunction +** method of virtual tables. +*/ +static void sqlite3InvalidFunction( + sqlite3_context *context, /* The function calling context */ + int NotUsed, /* Number of arguments to the function */ + sqlite3_value **NotUsed2 /* Value of each argument */ +){ + const char *zName = (const char*)sqlite3_user_data(context); + char *zErr; + UNUSED_PARAMETER2(NotUsed, NotUsed2); + zErr = sqlite3_mprintf( + "unable to use function %s in the requested context", zName); + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); +} + +/* ** Declare that a function has been overloaded by a virtual table. ** ** If the function already exists as a regular global function, then @@ -143403,7 +154680,8 @@ const char *zName, int nArg ){ - int rc = SQLITE_OK; + int rc; + char *zCopy; #ifdef SQLITE_ENABLE_API_ARMOR if( !sqlite3SafetyCheckOk(db) || zName==0 || nArg<-2 ){ @@ -143411,13 +154689,13 @@ } #endif sqlite3_mutex_enter(db->mutex); - if( sqlite3FindFunction(db, zName, nArg, SQLITE_UTF8, 0)==0 ){ - rc = sqlite3CreateFunc(db, zName, nArg, SQLITE_UTF8, - 0, sqlite3InvalidFunction, 0, 0, 0); - } - rc = sqlite3ApiExit(db, rc); + rc = sqlite3FindFunction(db, zName, nArg, SQLITE_UTF8, 0)!=0; sqlite3_mutex_leave(db->mutex); - return rc; + if( rc ) return SQLITE_OK; + zCopy = sqlite3_mprintf(zName); + if( zCopy==0 ) return SQLITE_NOMEM; + return sqlite3_create_function_v2(db, zName, nArg, SQLITE_UTF8, + zCopy, sqlite3InvalidFunction, 0, 0, sqlite3_free); } #ifndef SQLITE_OMIT_TRACE @@ -143768,7 +155046,8 @@ ** checkpointed. If an error is encountered it is returned immediately - ** no attempt is made to checkpoint any remaining databases. ** -** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART. +** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL, RESTART +** or TRUNCATE. */ SQLITE_PRIVATE int sqlite3Checkpoint(sqlite3 *db, int iDb, int eMode, int *pnLog, int *pnCkpt){ int rc = SQLITE_OK; /* Return code */ @@ -143978,7 +155257,7 @@ "unable to delete/modify collation sequence due to active statements"); return SQLITE_BUSY; } - sqlite3ExpirePreparedStatements(db); + sqlite3ExpirePreparedStatements(db, 0); /* If collation sequence pColl was created directly by a call to ** sqlite3_create_collation, and not generated by synthCollSeq(), @@ -144414,6 +155693,7 @@ }else{ isThreadsafe = sqlite3GlobalConfig.bFullMutex; } + if( flags & SQLITE_OPEN_PRIVATECACHE ){ flags &= ~SQLITE_OPEN_SHAREDCACHE; }else if( sqlite3GlobalConfig.sharedCacheEnabled ){ @@ -144446,7 +155726,11 @@ /* Allocate the sqlite data structure */ db = sqlite3MallocZero( sizeof(sqlite3) ); if( db==0 ) goto opendb_out; - if( isThreadsafe ){ + if( isThreadsafe +#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS + || sqlite3GlobalConfig.bCoreMutex +#endif + ){ db->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); if( db->mutex==0 ){ sqlite3_free(db); @@ -144453,6 +155737,9 @@ db = 0; goto opendb_out; } + if( isThreadsafe==0 ){ + sqlite3MutexWarnOnContention(db->mutex); + } } sqlite3_mutex_enter(db->mutex); db->errMask = 0xff; @@ -144459,6 +155746,7 @@ db->nDb = 2; db->magic = SQLITE_MAGIC_BUSY; db->aDb = db->aDbStatic; + db->lookaside.bDisable = 1; assert( sizeof(db->aLimit)==sizeof(aHardLimit) ); memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit)); @@ -144499,6 +155787,9 @@ #if defined(SQLITE_ENABLE_QPSG) | SQLITE_EnableQPSG #endif +#if defined(SQLITE_DEFAULT_DEFENSIVE) + | SQLITE_Defensive +#endif ; sqlite3HashInit(&db->aCollSeq); #ifndef SQLITE_OMIT_VIRTUALTABLE @@ -144634,7 +155925,7 @@ } #endif -#ifdef SQLITE_ENABLE_ICU +#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS) if( !db->mallocFailed && rc==SQLITE_OK ){ rc = sqlite3IcuInit(db); } @@ -144646,6 +155937,12 @@ } #endif +#ifdef SQLITE_ENABLE_DBPAGE_VTAB + if( !db->mallocFailed && rc==SQLITE_OK){ + rc = sqlite3DbpageRegister(db); + } +#endif + #ifdef SQLITE_ENABLE_DBSTAT_VTAB if( !db->mallocFailed && rc==SQLITE_OK){ rc = sqlite3DbstatRegister(db); @@ -144930,7 +156227,7 @@ ** 2. Invoke sqlite3_log() to provide the source code location where ** a low-level error is first detected. */ -static int reportError(int iErr, int lineno, const char *zType){ +SQLITE_PRIVATE int sqlite3ReportError(int iErr, int lineno, const char *zType){ sqlite3_log(iErr, "%s at line %d of [%.10s]", zType, lineno, 20+sqlite3_sourceid()); return iErr; @@ -144937,15 +156234,15 @@ } SQLITE_PRIVATE int sqlite3CorruptError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_CORRUPT, lineno, "database corruption"); + return sqlite3ReportError(SQLITE_CORRUPT, lineno, "database corruption"); } SQLITE_PRIVATE int sqlite3MisuseError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_MISUSE, lineno, "misuse"); + return sqlite3ReportError(SQLITE_MISUSE, lineno, "misuse"); } SQLITE_PRIVATE int sqlite3CantopenError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_CANTOPEN, lineno, "cannot open file"); + return sqlite3ReportError(SQLITE_CANTOPEN, lineno, "cannot open file"); } #ifdef SQLITE_DEBUG SQLITE_PRIVATE int sqlite3CorruptPgnoError(int lineno, Pgno pgno){ @@ -144952,15 +156249,15 @@ char zMsg[100]; sqlite3_snprintf(sizeof(zMsg), zMsg, "database corruption page %d", pgno); testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_CORRUPT, lineno, zMsg); + return sqlite3ReportError(SQLITE_CORRUPT, lineno, zMsg); } SQLITE_PRIVATE int sqlite3NomemError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_NOMEM, lineno, "OOM"); + return sqlite3ReportError(SQLITE_NOMEM, lineno, "OOM"); } SQLITE_PRIVATE int sqlite3IoerrnomemError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_IOERR_NOMEM, lineno, "I/O OOM error"); + return sqlite3ReportError(SQLITE_IOERR_NOMEM, lineno, "I/O OOM error"); } #endif @@ -145153,10 +156450,11 @@ }else if( op==SQLITE_FCNTL_JOURNAL_POINTER ){ *(sqlite3_file**)pArg = sqlite3PagerJrnlFile(pPager); rc = SQLITE_OK; - }else if( fd->pMethods ){ + }else if( op==SQLITE_FCNTL_DATA_VERSION ){ + *(unsigned int*)pArg = sqlite3PagerDataVersion(pPager); + rc = SQLITE_OK; + }else{ rc = sqlite3OsFileControl(fd, op, pArg); - }else{ - rc = SQLITE_NOTFOUND; } sqlite3BtreeLeave(pBtree); } @@ -145305,7 +156603,7 @@ ** This action provides a run-time test to see how the ALWAYS and ** NEVER macros were defined at compile-time. ** - ** The return value is ALWAYS(X). + ** The return value is ALWAYS(X) if X is true, or 0 if X is false. ** ** The recommended test is X==2. If the return value is 2, that means ** ALWAYS() and NEVER() are both no-op pass-through macros, which is the @@ -145328,7 +156626,7 @@ */ case SQLITE_TESTCTRL_ALWAYS: { int x = va_arg(ap,int); - rc = ALWAYS(x); + rc = x ? ALWAYS(x) : 0; break; } @@ -145377,51 +156675,28 @@ break; } -#ifdef SQLITE_N_KEYWORD - /* sqlite3_test_control(SQLITE_TESTCTRL_ISKEYWORD, const char *zWord) + /* sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff); ** - ** If zWord is a keyword recognized by the parser, then return the - ** number of keywords. Or if zWord is not a keyword, return 0. - ** - ** This test feature is only available in the amalgamation since - ** the SQLITE_N_KEYWORD macro is not defined in this file if SQLite - ** is built using separate source files. + ** If parameter onoff is non-zero, subsequent calls to localtime() + ** and its variants fail. If onoff is zero, undo this setting. */ - case SQLITE_TESTCTRL_ISKEYWORD: { - const char *zWord = va_arg(ap, const char*); - int n = sqlite3Strlen30(zWord); - rc = (sqlite3KeywordCode((u8*)zWord, n)!=TK_ID) ? SQLITE_N_KEYWORD : 0; + case SQLITE_TESTCTRL_LOCALTIME_FAULT: { + sqlite3GlobalConfig.bLocaltimeFault = va_arg(ap, int); break; } -#endif - /* sqlite3_test_control(SQLITE_TESTCTRL_SCRATCHMALLOC, sz, &pNew, pFree); + /* sqlite3_test_control(SQLITE_TESTCTRL_INTERNAL_FUNCS, int onoff); ** - ** Pass pFree into sqlite3ScratchFree(). - ** If sz>0 then allocate a scratch buffer into pNew. + ** If parameter onoff is non-zero, internal-use-only SQL functions + ** are visible to ordinary SQL. This is useful for testing but is + ** unsafe because invalid parameters to those internal-use-only functions + ** can result in crashes or segfaults. */ - case SQLITE_TESTCTRL_SCRATCHMALLOC: { - void *pFree, **ppNew; - int sz; - sz = va_arg(ap, int); - ppNew = va_arg(ap, void**); - pFree = va_arg(ap, void*); - if( sz ) *ppNew = sqlite3ScratchMalloc(sz); - sqlite3ScratchFree(pFree); + case SQLITE_TESTCTRL_INTERNAL_FUNCTIONS: { + sqlite3GlobalConfig.bInternalFunctions = va_arg(ap, int); break; } - /* sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff); - ** - ** If parameter onoff is non-zero, configure the wrappers so that all - ** subsequent calls to localtime() and variants fail. If onoff is zero, - ** undo this setting. - */ - case SQLITE_TESTCTRL_LOCALTIME_FAULT: { - sqlite3GlobalConfig.bLocaltimeFault = va_arg(ap, int); - break; - } - /* sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, int); ** ** Set or clear a flag that indicates that the database file is always well- @@ -145452,7 +156727,8 @@ */ case SQLITE_TESTCTRL_VDBE_COVERAGE: { #ifdef SQLITE_VDBE_COVERAGE - typedef void (*branch_callback)(void*,int,u8,u8); + typedef void (*branch_callback)(void*,unsigned int, + unsigned char,unsigned char); sqlite3GlobalConfig.xVdbeBranch = va_arg(ap,branch_callback); sqlite3GlobalConfig.pVdbeBranchArg = va_arg(ap,void*); #endif @@ -145504,6 +156780,22 @@ sqlite3_mutex_leave(db->mutex); break; } + +#if defined(YYCOVERAGE) + /* sqlite3_test_control(SQLITE_TESTCTRL_PARSER_COVERAGE, FILE *out) + ** + ** This test control (only available when SQLite is compiled with + ** -DYYCOVERAGE) writes a report onto "out" that shows all + ** state/lookahead combinations in the parser state machine + ** which are never exercised. If any state is missed, make the + ** return code SQLITE_ERROR. + */ + case SQLITE_TESTCTRL_PARSER_COVERAGE: { + FILE *out = va_arg(ap, FILE*); + if( sqlite3ParserCoverage(out) ) rc = SQLITE_ERROR; + break; + } +#endif /* defined(YYCOVERAGE) */ } va_end(ap); #endif /* SQLITE_UNTESTABLE */ @@ -145552,7 +156844,7 @@ ){ const char *z = sqlite3_uri_parameter(zFilename, zParam); sqlite3_int64 v; - if( z && sqlite3DecOrHexToI64(z, &v)==SQLITE_OK ){ + if( z && sqlite3DecOrHexToI64(z, &v)==0 ){ bDflt = v; } return bDflt; @@ -145623,7 +156915,7 @@ if( iDb==0 || iDb>1 ){ Btree *pBt = db->aDb[iDb].pBt; if( 0==sqlite3BtreeIsInTrans(pBt) ){ - rc = sqlite3BtreeBeginTrans(pBt, 0); + rc = sqlite3BtreeBeginTrans(pBt, 0, 0); if( rc==SQLITE_OK ){ rc = sqlite3PagerSnapshotGet(sqlite3BtreePager(pBt), ppSnapshot); } @@ -145658,12 +156950,30 @@ iDb = sqlite3FindDbName(db, zDb); if( iDb==0 || iDb>1 ){ Btree *pBt = db->aDb[iDb].pBt; - if( 0==sqlite3BtreeIsInReadTrans(pBt) ){ - rc = sqlite3PagerSnapshotOpen(sqlite3BtreePager(pBt), pSnapshot); + if( sqlite3BtreeIsInTrans(pBt)==0 ){ + Pager *pPager = sqlite3BtreePager(pBt); + int bUnlock = 0; + if( sqlite3BtreeIsInReadTrans(pBt) ){ + if( db->nVdbeActive==0 ){ + rc = sqlite3PagerSnapshotCheck(pPager, pSnapshot); + if( rc==SQLITE_OK ){ + bUnlock = 1; + rc = sqlite3BtreeCommit(pBt); + } + } + }else{ + rc = SQLITE_OK; + } if( rc==SQLITE_OK ){ - rc = sqlite3BtreeBeginTrans(pBt, 0); - sqlite3PagerSnapshotOpen(sqlite3BtreePager(pBt), 0); + rc = sqlite3PagerSnapshotOpen(pPager, pSnapshot); } + if( rc==SQLITE_OK ){ + rc = sqlite3BtreeBeginTrans(pBt, 0, 0); + sqlite3PagerSnapshotOpen(pPager, 0); + } + if( bUnlock ){ + sqlite3PagerSnapshotUnlock(pPager); + } } } } @@ -145693,7 +157003,7 @@ if( iDb==0 || iDb>1 ){ Btree *pBt = db->aDb[iDb].pBt; if( 0==sqlite3BtreeIsInReadTrans(pBt) ){ - rc = sqlite3BtreeBeginTrans(pBt, 0); + rc = sqlite3BtreeBeginTrans(pBt, 0, 0); if( rc==SQLITE_OK ){ rc = sqlite3PagerSnapshotRecover(sqlite3BtreePager(pBt)); sqlite3BtreeCommit(pBt); @@ -147261,7 +158571,7 @@ ); SQLITE_PRIVATE void sqlite3Fts3ExprFree(Fts3Expr *); #ifdef SQLITE_TEST -SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db); +SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db, Fts3Hash*); SQLITE_PRIVATE int sqlite3Fts3InitTerm(sqlite3 *db); #endif @@ -148829,7 +160139,7 @@ const char *zCsr = zNode; /* Cursor to iterate through node */ const char *zEnd = &zCsr[nNode];/* End of interior node buffer */ char *zBuffer = 0; /* Buffer to load terms into */ - int nAlloc = 0; /* Size of allocated buffer */ + i64 nAlloc = 0; /* Size of allocated buffer */ int isFirstTerm = 1; /* True when processing first term on page */ sqlite3_int64 iChild; /* Block id of child node to descend to */ @@ -148867,14 +160177,14 @@ zCsr += fts3GetVarint32(zCsr, &nSuffix); assert( nPrefix>=0 && nSuffix>=0 ); - if( &zCsr[nSuffix]>zEnd ){ + if( nPrefix>zCsr-zNode || nSuffix>zEnd-zCsr ){ rc = FTS_CORRUPT_VTAB; goto finish_scan; } - if( nPrefix+nSuffix>nAlloc ){ + if( (i64)nPrefix+nSuffix>nAlloc ){ char *zNew; - nAlloc = (nPrefix+nSuffix) * 2; - zNew = (char *)sqlite3_realloc(zBuffer, nAlloc); + nAlloc = ((i64)nPrefix+nSuffix) * 2; + zNew = (char *)sqlite3_realloc64(zBuffer, nAlloc); if( !zNew ){ rc = SQLITE_NOMEM; goto finish_scan; @@ -150816,7 +162126,7 @@ int rc = SQLITE_OK; UNUSED_PARAMETER(iSavepoint); assert( ((Fts3Table *)pVtab)->inTransaction ); - assert( ((Fts3Table *)pVtab)->mxSavepoint < iSavepoint ); + assert( ((Fts3Table *)pVtab)->mxSavepoint <= iSavepoint ); TESTONLY( ((Fts3Table *)pVtab)->mxSavepoint = iSavepoint ); if( ((Fts3Table *)pVtab)->bIgnoreSavepoint==0 ){ rc = fts3SyncMethod(pVtab); @@ -150854,8 +162164,23 @@ return SQLITE_OK; } +/* +** Return true if zName is the extension on one of the shadow tables used +** by this module. +*/ +static int fts3ShadowName(const char *zName){ + static const char *azName[] = { + "content", "docsize", "segdir", "segments", "stat", + }; + unsigned int i; + for(i=0; i */ /* -** Function to query the hash-table of tokenizers (see README.tokenizers). -*/ -static int queryTestTokenizer( - sqlite3 *db, - const char *zName, - const sqlite3_tokenizer_module **pp -){ - int rc; - sqlite3_stmt *pStmt; - const char zSql[] = "SELECT fts3_tokenizer(?)"; - - *pp = 0; - rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); - if( rc!=SQLITE_OK ){ - return rc; - } - - sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC); - if( SQLITE_ROW==sqlite3_step(pStmt) ){ - if( sqlite3_column_type(pStmt, 0)==SQLITE_BLOB ){ - memcpy((void *)pp, sqlite3_column_blob(pStmt, 0), sizeof(*pp)); - } - } - - return sqlite3_finalize(pStmt); -} - -/* ** Return a pointer to a buffer containing a text representation of the ** expression passed as the first argument. The buffer is obtained from ** sqlite3_malloc(). It is the responsibility of the caller to use @@ -154726,12 +166027,12 @@ ** ** SELECT fts3_exprtest('simple', 'Bill col2:Bloggs', 'col1', 'col2'); */ -static void fts3ExprTest( +static void fts3ExprTestCommon( + int bRebalance, sqlite3_context *context, int argc, sqlite3_value **argv ){ - sqlite3_tokenizer_module const *pModule = 0; sqlite3_tokenizer *pTokenizer = 0; int rc; char **azCol = 0; @@ -154741,7 +166042,9 @@ int ii; Fts3Expr *pExpr; char *zBuf = 0; - sqlite3 *db = sqlite3_context_db_handle(context); + Fts3Hash *pHash = (Fts3Hash*)sqlite3_user_data(context); + const char *zTokenizer = 0; + char *zErr = 0; if( argc<3 ){ sqlite3_result_error(context, @@ -154750,24 +166053,18 @@ return; } - rc = queryTestTokenizer(db, - (const char *)sqlite3_value_text(argv[0]), &pModule); - if( rc==SQLITE_NOMEM ){ - sqlite3_result_error_nomem(context); - goto exprtest_out; - }else if( !pModule ){ - sqlite3_result_error(context, "No such tokenizer module", -1); - goto exprtest_out; + zTokenizer = (const char*)sqlite3_value_text(argv[0]); + rc = sqlite3Fts3InitTokenizer(pHash, zTokenizer, &pTokenizer, &zErr); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ){ + sqlite3_result_error_nomem(context); + }else{ + sqlite3_result_error(context, zErr, -1); + } + sqlite3_free(zErr); + return; } - rc = pModule->xCreate(0, 0, &pTokenizer); - assert( rc==SQLITE_NOMEM || rc==SQLITE_OK ); - if( rc==SQLITE_NOMEM ){ - sqlite3_result_error_nomem(context); - goto exprtest_out; - } - pTokenizer->pModule = pModule; - zExpr = (const char *)sqlite3_value_text(argv[1]); nExpr = sqlite3_value_bytes(argv[1]); nCol = argc-2; @@ -154780,7 +166077,7 @@ azCol[ii] = (char *)sqlite3_value_text(argv[ii+2]); } - if( sqlite3_user_data(context) ){ + if( bRebalance ){ char *zDummy = 0; rc = sqlite3Fts3ExprParse( pTokenizer, 0, azCol, 0, nCol, nCol, zExpr, nExpr, &pExpr, &zDummy @@ -154806,23 +166103,38 @@ sqlite3Fts3ExprFree(pExpr); exprtest_out: - if( pModule && pTokenizer ){ - rc = pModule->xDestroy(pTokenizer); + if( pTokenizer ){ + rc = pTokenizer->pModule->xDestroy(pTokenizer); } sqlite3_free(azCol); } +static void fts3ExprTest( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + fts3ExprTestCommon(0, context, argc, argv); +} +static void fts3ExprTestRebalance( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + fts3ExprTestCommon(1, context, argc, argv); +} + /* ** Register the query expression parser test function fts3_exprtest() ** with database connection db. */ -SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3* db){ +SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db, Fts3Hash *pHash){ int rc = sqlite3_create_function( - db, "fts3_exprtest", -1, SQLITE_UTF8, 0, fts3ExprTest, 0, 0 + db, "fts3_exprtest", -1, SQLITE_UTF8, (void*)pHash, fts3ExprTest, 0, 0 ); if( rc==SQLITE_OK ){ rc = sqlite3_create_function(db, "fts3_exprtest_rebalance", - -1, SQLITE_UTF8, (void *)1, fts3ExprTest, 0, 0 + -1, SQLITE_UTF8, (void*)pHash, fts3ExprTestRebalance, 0, 0 ); } return rc; @@ -157085,7 +168397,8 @@ 0, /* xRename */ 0, /* xSavepoint */ 0, /* xRelease */ - 0 /* xRollbackTo */ + 0, /* xRollbackTo */ + 0 /* xShadowName */ }; int rc; /* Return code */ @@ -158473,15 +169786,19 @@ ** safe (no risk of overread) even if the node data is corrupted. */ pNext += fts3GetVarint32(pNext, &nPrefix); pNext += fts3GetVarint32(pNext, &nSuffix); - if( nPrefix<0 || nSuffix<=0 - || &pNext[nSuffix]>&pReader->aNode[pReader->nNode] + if( nSuffix<=0 + || (&pReader->aNode[pReader->nNode] - pNext)pReader->nTermAlloc ){ return FTS_CORRUPT_VTAB; } - if( nPrefix+nSuffix>pReader->nTermAlloc ){ - int nNew = (nPrefix+nSuffix)*2; - char *zNew = sqlite3_realloc(pReader->zTerm, nNew); + /* Both nPrefix and nSuffix were read by fts3GetVarint32() and so are + ** between 0 and 0x7FFFFFFF. But the sum of the two may cause integer + ** overflow - hence the (i64) casts. */ + if( (i64)nPrefix+nSuffix>(i64)pReader->nTermAlloc ){ + i64 nNew = ((i64)nPrefix+nSuffix)*2; + char *zNew = sqlite3_realloc64(pReader->zTerm, nNew); if( !zNew ){ return SQLITE_NOMEM; } @@ -158503,7 +169820,7 @@ ** b-tree node. And that the final byte of the doclist is 0x00. If either ** of these statements is untrue, then the data structure is corrupt. */ - if( &pReader->aDoclist[pReader->nDoclist]>&pReader->aNode[pReader->nNode] + if( (&pReader->aNode[pReader->nNode] - pReader->aDoclist)nDoclist || (pReader->nPopulate==0 && pReader->aDoclist[pReader->nDoclist-1]) ){ return FTS_CORRUPT_VTAB; @@ -159007,6 +170324,7 @@ sqlite3_bind_blob(pStmt, 2, z, n, SQLITE_STATIC); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); + sqlite3_bind_null(pStmt, 2); } return rc; } @@ -159063,6 +170381,7 @@ sqlite3_bind_blob(pStmt, 6, zRoot, nRoot, SQLITE_STATIC); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); + sqlite3_bind_null(pStmt, 6); } return rc; } @@ -160542,6 +171861,7 @@ sqlite3_bind_blob(pStmt, 2, pBlob, nBlob, SQLITE_STATIC); sqlite3_step(pStmt); *pRC = sqlite3_reset(pStmt); + sqlite3_bind_null(pStmt, 2); sqlite3_free(a); } @@ -160826,6 +172146,9 @@ } p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &nSuffix); + if( nPrefix>p->iOff || nSuffix>p->nNode-p->iOff ){ + return SQLITE_CORRUPT_VTAB; + } blobGrowBuffer(&p->term, nPrefix+nSuffix, &rc); if( rc==SQLITE_OK ){ memcpy(&p->term.a[nPrefix], &p->aNode[p->iOff], nSuffix); @@ -160833,6 +172156,9 @@ p->iOff += nSuffix; if( p->iChild==0 ){ p->iOff += fts3GetVarint32(&p->aNode[p->iOff], &p->nDoclist); + if( (p->nNode-p->iOff)nDoclist ){ + return SQLITE_CORRUPT_VTAB; + } p->aDoclist = &p->aNode[p->iOff]; p->iOff += p->nDoclist; } @@ -160840,7 +172166,6 @@ } assert( p->iOff<=p->nNode ); - return rc; } @@ -161730,6 +173055,7 @@ sqlite3_bind_int(pChomp, 4, iIdx); sqlite3_step(pChomp); rc = sqlite3_reset(pChomp); + sqlite3_bind_null(pChomp, 2); } } @@ -161809,6 +173135,7 @@ sqlite3_bind_blob(pReplace, 2, pHint->a, pHint->n, SQLITE_STATIC); sqlite3_step(pReplace); rc = sqlite3_reset(pReplace); + sqlite3_bind_null(pReplace, 2); } return rc; @@ -162623,7 +173950,6 @@ ){ Fts3Table *p = (Fts3Table *)pVtab; int rc = SQLITE_OK; /* Return Code */ - int isRemove = 0; /* True for an UPDATE or DELETE */ u32 *aSzIns = 0; /* Sizes of inserted documents */ u32 *aSzDel = 0; /* Sizes of deleted documents */ int nChng = 0; /* Net change in number of documents */ @@ -162721,7 +174047,6 @@ if( sqlite3_value_type(apVal[0])!=SQLITE_NULL ){ assert( sqlite3_value_type(apVal[0])==SQLITE_INTEGER ); rc = fts3DeleteByRowid(p, apVal[0], &nChng, aSzDel); - isRemove = 1; } /* If this is an INSERT or UPDATE operation, insert the new record. */ @@ -162733,7 +174058,7 @@ rc = FTS_CORRUPT_VTAB; } } - if( rc==SQLITE_OK && (!isRemove || *pRowid!=p->iPrevDocid ) ){ + if( rc==SQLITE_OK ){ rc = fts3PendingTermsDocid(p, 0, iLangid, *pRowid); } if( rc==SQLITE_OK ){ @@ -165253,6 +176578,2550 @@ #endif /* !defined(SQLITE_DISABLE_FTS3_UNICODE) */ /************** End of fts3_unicode2.c ***************************************/ +/************** Begin file json1.c *******************************************/ +/* +** 2015-08-12 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This SQLite extension implements JSON functions. The interface is +** modeled after MySQL JSON functions: +** +** https://dev.mysql.com/doc/refman/5.7/en/json.html +** +** For the time being, all JSON is stored as pure text. (We might add +** a JSONB type in the future which stores a binary encoding of JSON in +** a BLOB, but there is no support for JSONB in the current implementation. +** This implementation parses JSON text at 250 MB/s, so it is hard to see +** how JSONB might improve on that.) +*/ +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_JSON1) +#if !defined(SQLITEINT_H) +/* #include "sqlite3ext.h" */ +#endif +SQLITE_EXTENSION_INIT1 +/* #include */ +/* #include */ +/* #include */ +/* #include */ + +/* Mark a function parameter as unused, to suppress nuisance compiler +** warnings. */ +#ifndef UNUSED_PARAM +# define UNUSED_PARAM(X) (void)(X) +#endif + +#ifndef LARGEST_INT64 +# define LARGEST_INT64 (0xffffffff|(((sqlite3_int64)0x7fffffff)<<32)) +# define SMALLEST_INT64 (((sqlite3_int64)-1) - LARGEST_INT64) +#endif + +/* +** Versions of isspace(), isalnum() and isdigit() to which it is safe +** to pass signed char values. +*/ +#ifdef sqlite3Isdigit + /* Use the SQLite core versions if this routine is part of the + ** SQLite amalgamation */ +# define safe_isdigit(x) sqlite3Isdigit(x) +# define safe_isalnum(x) sqlite3Isalnum(x) +# define safe_isxdigit(x) sqlite3Isxdigit(x) +#else + /* Use the standard library for separate compilation */ +#include /* amalgamator: keep */ +# define safe_isdigit(x) isdigit((unsigned char)(x)) +# define safe_isalnum(x) isalnum((unsigned char)(x)) +# define safe_isxdigit(x) isxdigit((unsigned char)(x)) +#endif + +/* +** Growing our own isspace() routine this way is twice as fast as +** the library isspace() function, resulting in a 7% overall performance +** increase for the parser. (Ubuntu14.10 gcc 4.8.4 x64 with -Os). +*/ +static const char jsonIsSpace[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +}; +#define safe_isspace(x) (jsonIsSpace[(unsigned char)x]) + +#ifndef SQLITE_AMALGAMATION + /* Unsigned integer types. These are already defined in the sqliteInt.h, + ** but the definitions need to be repeated for separate compilation. */ + typedef sqlite3_uint64 u64; + typedef unsigned int u32; + typedef unsigned short int u16; + typedef unsigned char u8; +#endif + +/* Objects */ +typedef struct JsonString JsonString; +typedef struct JsonNode JsonNode; +typedef struct JsonParse JsonParse; + +/* An instance of this object represents a JSON string +** under construction. Really, this is a generic string accumulator +** that can be and is used to create strings other than JSON. +*/ +struct JsonString { + sqlite3_context *pCtx; /* Function context - put error messages here */ + char *zBuf; /* Append JSON content here */ + u64 nAlloc; /* Bytes of storage available in zBuf[] */ + u64 nUsed; /* Bytes of zBuf[] currently used */ + u8 bStatic; /* True if zBuf is static space */ + u8 bErr; /* True if an error has been encountered */ + char zSpace[100]; /* Initial static space */ +}; + +/* JSON type values +*/ +#define JSON_NULL 0 +#define JSON_TRUE 1 +#define JSON_FALSE 2 +#define JSON_INT 3 +#define JSON_REAL 4 +#define JSON_STRING 5 +#define JSON_ARRAY 6 +#define JSON_OBJECT 7 + +/* The "subtype" set for JSON values */ +#define JSON_SUBTYPE 74 /* Ascii for "J" */ + +/* +** Names of the various JSON types: +*/ +static const char * const jsonType[] = { + "null", "true", "false", "integer", "real", "text", "array", "object" +}; + +/* Bit values for the JsonNode.jnFlag field +*/ +#define JNODE_RAW 0x01 /* Content is raw, not JSON encoded */ +#define JNODE_ESCAPE 0x02 /* Content is text with \ escapes */ +#define JNODE_REMOVE 0x04 /* Do not output */ +#define JNODE_REPLACE 0x08 /* Replace with JsonNode.u.iReplace */ +#define JNODE_PATCH 0x10 /* Patch with JsonNode.u.pPatch */ +#define JNODE_APPEND 0x20 /* More ARRAY/OBJECT entries at u.iAppend */ +#define JNODE_LABEL 0x40 /* Is a label of an object */ + + +/* A single node of parsed JSON +*/ +struct JsonNode { + u8 eType; /* One of the JSON_ type values */ + u8 jnFlags; /* JNODE flags */ + u32 n; /* Bytes of content, or number of sub-nodes */ + union { + const char *zJContent; /* Content for INT, REAL, and STRING */ + u32 iAppend; /* More terms for ARRAY and OBJECT */ + u32 iKey; /* Key for ARRAY objects in json_tree() */ + u32 iReplace; /* Replacement content for JNODE_REPLACE */ + JsonNode *pPatch; /* Node chain of patch for JNODE_PATCH */ + } u; +}; + +/* A completely parsed JSON string +*/ +struct JsonParse { + u32 nNode; /* Number of slots of aNode[] used */ + u32 nAlloc; /* Number of slots of aNode[] allocated */ + JsonNode *aNode; /* Array of nodes containing the parse */ + const char *zJson; /* Original JSON string */ + u32 *aUp; /* Index of parent of each node */ + u8 oom; /* Set to true if out of memory */ + u8 nErr; /* Number of errors seen */ + u16 iDepth; /* Nesting depth */ + int nJson; /* Length of the zJson string in bytes */ + u32 iHold; /* Replace cache line with the lowest iHold value */ +}; + +/* +** Maximum nesting depth of JSON for this implementation. +** +** This limit is needed to avoid a stack overflow in the recursive +** descent parser. A depth of 2000 is far deeper than any sane JSON +** should go. +*/ +#define JSON_MAX_DEPTH 2000 + +/************************************************************************** +** Utility routines for dealing with JsonString objects +**************************************************************************/ + +/* Set the JsonString object to an empty string +*/ +static void jsonZero(JsonString *p){ + p->zBuf = p->zSpace; + p->nAlloc = sizeof(p->zSpace); + p->nUsed = 0; + p->bStatic = 1; +} + +/* Initialize the JsonString object +*/ +static void jsonInit(JsonString *p, sqlite3_context *pCtx){ + p->pCtx = pCtx; + p->bErr = 0; + jsonZero(p); +} + + +/* Free all allocated memory and reset the JsonString object back to its +** initial state. +*/ +static void jsonReset(JsonString *p){ + if( !p->bStatic ) sqlite3_free(p->zBuf); + jsonZero(p); +} + + +/* Report an out-of-memory (OOM) condition +*/ +static void jsonOom(JsonString *p){ + p->bErr = 1; + sqlite3_result_error_nomem(p->pCtx); + jsonReset(p); +} + +/* Enlarge pJson->zBuf so that it can hold at least N more bytes. +** Return zero on success. Return non-zero on an OOM error +*/ +static int jsonGrow(JsonString *p, u32 N){ + u64 nTotal = NnAlloc ? p->nAlloc*2 : p->nAlloc+N+10; + char *zNew; + if( p->bStatic ){ + if( p->bErr ) return 1; + zNew = sqlite3_malloc64(nTotal); + if( zNew==0 ){ + jsonOom(p); + return SQLITE_NOMEM; + } + memcpy(zNew, p->zBuf, (size_t)p->nUsed); + p->zBuf = zNew; + p->bStatic = 0; + }else{ + zNew = sqlite3_realloc64(p->zBuf, nTotal); + if( zNew==0 ){ + jsonOom(p); + return SQLITE_NOMEM; + } + p->zBuf = zNew; + } + p->nAlloc = nTotal; + return SQLITE_OK; +} + +/* Append N bytes from zIn onto the end of the JsonString string. +*/ +static void jsonAppendRaw(JsonString *p, const char *zIn, u32 N){ + if( (N+p->nUsed >= p->nAlloc) && jsonGrow(p,N)!=0 ) return; + memcpy(p->zBuf+p->nUsed, zIn, N); + p->nUsed += N; +} + +/* Append formatted text (not to exceed N bytes) to the JsonString. +*/ +static void jsonPrintf(int N, JsonString *p, const char *zFormat, ...){ + va_list ap; + if( (p->nUsed + N >= p->nAlloc) && jsonGrow(p, N) ) return; + va_start(ap, zFormat); + sqlite3_vsnprintf(N, p->zBuf+p->nUsed, zFormat, ap); + va_end(ap); + p->nUsed += (int)strlen(p->zBuf+p->nUsed); +} + +/* Append a single character +*/ +static void jsonAppendChar(JsonString *p, char c){ + if( p->nUsed>=p->nAlloc && jsonGrow(p,1)!=0 ) return; + p->zBuf[p->nUsed++] = c; +} + +/* Append a comma separator to the output buffer, if the previous +** character is not '[' or '{'. +*/ +static void jsonAppendSeparator(JsonString *p){ + char c; + if( p->nUsed==0 ) return; + c = p->zBuf[p->nUsed-1]; + if( c!='[' && c!='{' ) jsonAppendChar(p, ','); +} + +/* Append the N-byte string in zIn to the end of the JsonString string +** under construction. Enclose the string in "..." and escape +** any double-quotes or backslash characters contained within the +** string. +*/ +static void jsonAppendString(JsonString *p, const char *zIn, u32 N){ + u32 i; + if( (N+p->nUsed+2 >= p->nAlloc) && jsonGrow(p,N+2)!=0 ) return; + p->zBuf[p->nUsed++] = '"'; + for(i=0; inUsed+N+3-i > p->nAlloc) && jsonGrow(p,N+3-i)!=0 ) return; + p->zBuf[p->nUsed++] = '\\'; + }else if( c<=0x1f ){ + static const char aSpecial[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 'b', 't', 'n', 0, 'f', 'r', 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + assert( sizeof(aSpecial)==32 ); + assert( aSpecial['\b']=='b' ); + assert( aSpecial['\f']=='f' ); + assert( aSpecial['\n']=='n' ); + assert( aSpecial['\r']=='r' ); + assert( aSpecial['\t']=='t' ); + if( aSpecial[c] ){ + c = aSpecial[c]; + goto json_simple_escape; + } + if( (p->nUsed+N+7+i > p->nAlloc) && jsonGrow(p,N+7-i)!=0 ) return; + p->zBuf[p->nUsed++] = '\\'; + p->zBuf[p->nUsed++] = 'u'; + p->zBuf[p->nUsed++] = '0'; + p->zBuf[p->nUsed++] = '0'; + p->zBuf[p->nUsed++] = '0' + (c>>4); + c = "0123456789abcdef"[c&0xf]; + } + p->zBuf[p->nUsed++] = c; + } + p->zBuf[p->nUsed++] = '"'; + assert( p->nUsednAlloc ); +} + +/* +** Append a function parameter value to the JSON string under +** construction. +*/ +static void jsonAppendValue( + JsonString *p, /* Append to this JSON string */ + sqlite3_value *pValue /* Value to append */ +){ + switch( sqlite3_value_type(pValue) ){ + case SQLITE_NULL: { + jsonAppendRaw(p, "null", 4); + break; + } + case SQLITE_INTEGER: + case SQLITE_FLOAT: { + const char *z = (const char*)sqlite3_value_text(pValue); + u32 n = (u32)sqlite3_value_bytes(pValue); + jsonAppendRaw(p, z, n); + break; + } + case SQLITE_TEXT: { + const char *z = (const char*)sqlite3_value_text(pValue); + u32 n = (u32)sqlite3_value_bytes(pValue); + if( sqlite3_value_subtype(pValue)==JSON_SUBTYPE ){ + jsonAppendRaw(p, z, n); + }else{ + jsonAppendString(p, z, n); + } + break; + } + default: { + if( p->bErr==0 ){ + sqlite3_result_error(p->pCtx, "JSON cannot hold BLOB values", -1); + p->bErr = 2; + jsonReset(p); + } + break; + } + } +} + + +/* Make the JSON in p the result of the SQL function. +*/ +static void jsonResult(JsonString *p){ + if( p->bErr==0 ){ + sqlite3_result_text64(p->pCtx, p->zBuf, p->nUsed, + p->bStatic ? SQLITE_TRANSIENT : sqlite3_free, + SQLITE_UTF8); + jsonZero(p); + } + assert( p->bStatic ); +} + +/************************************************************************** +** Utility routines for dealing with JsonNode and JsonParse objects +**************************************************************************/ + +/* +** Return the number of consecutive JsonNode slots need to represent +** the parsed JSON at pNode. The minimum answer is 1. For ARRAY and +** OBJECT types, the number might be larger. +** +** Appended elements are not counted. The value returned is the number +** by which the JsonNode counter should increment in order to go to the +** next peer value. +*/ +static u32 jsonNodeSize(JsonNode *pNode){ + return pNode->eType>=JSON_ARRAY ? pNode->n+1 : 1; +} + +/* +** Reclaim all memory allocated by a JsonParse object. But do not +** delete the JsonParse object itself. +*/ +static void jsonParseReset(JsonParse *pParse){ + sqlite3_free(pParse->aNode); + pParse->aNode = 0; + pParse->nNode = 0; + pParse->nAlloc = 0; + sqlite3_free(pParse->aUp); + pParse->aUp = 0; +} + +/* +** Free a JsonParse object that was obtained from sqlite3_malloc(). +*/ +static void jsonParseFree(JsonParse *pParse){ + jsonParseReset(pParse); + sqlite3_free(pParse); +} + +/* +** Convert the JsonNode pNode into a pure JSON string and +** append to pOut. Subsubstructure is also included. Return +** the number of JsonNode objects that are encoded. +*/ +static void jsonRenderNode( + JsonNode *pNode, /* The node to render */ + JsonString *pOut, /* Write JSON here */ + sqlite3_value **aReplace /* Replacement values */ +){ + if( pNode->jnFlags & (JNODE_REPLACE|JNODE_PATCH) ){ + if( pNode->jnFlags & JNODE_REPLACE ){ + jsonAppendValue(pOut, aReplace[pNode->u.iReplace]); + return; + } + pNode = pNode->u.pPatch; + } + switch( pNode->eType ){ + default: { + assert( pNode->eType==JSON_NULL ); + jsonAppendRaw(pOut, "null", 4); + break; + } + case JSON_TRUE: { + jsonAppendRaw(pOut, "true", 4); + break; + } + case JSON_FALSE: { + jsonAppendRaw(pOut, "false", 5); + break; + } + case JSON_STRING: { + if( pNode->jnFlags & JNODE_RAW ){ + jsonAppendString(pOut, pNode->u.zJContent, pNode->n); + break; + } + /* Fall through into the next case */ + } + case JSON_REAL: + case JSON_INT: { + jsonAppendRaw(pOut, pNode->u.zJContent, pNode->n); + break; + } + case JSON_ARRAY: { + u32 j = 1; + jsonAppendChar(pOut, '['); + for(;;){ + while( j<=pNode->n ){ + if( (pNode[j].jnFlags & JNODE_REMOVE)==0 ){ + jsonAppendSeparator(pOut); + jsonRenderNode(&pNode[j], pOut, aReplace); + } + j += jsonNodeSize(&pNode[j]); + } + if( (pNode->jnFlags & JNODE_APPEND)==0 ) break; + pNode = &pNode[pNode->u.iAppend]; + j = 1; + } + jsonAppendChar(pOut, ']'); + break; + } + case JSON_OBJECT: { + u32 j = 1; + jsonAppendChar(pOut, '{'); + for(;;){ + while( j<=pNode->n ){ + if( (pNode[j+1].jnFlags & JNODE_REMOVE)==0 ){ + jsonAppendSeparator(pOut); + jsonRenderNode(&pNode[j], pOut, aReplace); + jsonAppendChar(pOut, ':'); + jsonRenderNode(&pNode[j+1], pOut, aReplace); + } + j += 1 + jsonNodeSize(&pNode[j+1]); + } + if( (pNode->jnFlags & JNODE_APPEND)==0 ) break; + pNode = &pNode[pNode->u.iAppend]; + j = 1; + } + jsonAppendChar(pOut, '}'); + break; + } + } +} + +/* +** Return a JsonNode and all its descendents as a JSON string. +*/ +static void jsonReturnJson( + JsonNode *pNode, /* Node to return */ + sqlite3_context *pCtx, /* Return value for this function */ + sqlite3_value **aReplace /* Array of replacement values */ +){ + JsonString s; + jsonInit(&s, pCtx); + jsonRenderNode(pNode, &s, aReplace); + jsonResult(&s); + sqlite3_result_subtype(pCtx, JSON_SUBTYPE); +} + +/* +** Make the JsonNode the return value of the function. +*/ +static void jsonReturn( + JsonNode *pNode, /* Node to return */ + sqlite3_context *pCtx, /* Return value for this function */ + sqlite3_value **aReplace /* Array of replacement values */ +){ + switch( pNode->eType ){ + default: { + assert( pNode->eType==JSON_NULL ); + sqlite3_result_null(pCtx); + break; + } + case JSON_TRUE: { + sqlite3_result_int(pCtx, 1); + break; + } + case JSON_FALSE: { + sqlite3_result_int(pCtx, 0); + break; + } + case JSON_INT: { + sqlite3_int64 i = 0; + const char *z = pNode->u.zJContent; + if( z[0]=='-' ){ z++; } + while( z[0]>='0' && z[0]<='9' ){ + unsigned v = *(z++) - '0'; + if( i>=LARGEST_INT64/10 ){ + if( i>LARGEST_INT64/10 ) goto int_as_real; + if( z[0]>='0' && z[0]<='9' ) goto int_as_real; + if( v==9 ) goto int_as_real; + if( v==8 ){ + if( pNode->u.zJContent[0]=='-' ){ + sqlite3_result_int64(pCtx, SMALLEST_INT64); + goto int_done; + }else{ + goto int_as_real; + } + } + } + i = i*10 + v; + } + if( pNode->u.zJContent[0]=='-' ){ i = -i; } + sqlite3_result_int64(pCtx, i); + int_done: + break; + int_as_real: /* fall through to real */; + } + case JSON_REAL: { + double r; +#ifdef SQLITE_AMALGAMATION + const char *z = pNode->u.zJContent; + sqlite3AtoF(z, &r, sqlite3Strlen30(z), SQLITE_UTF8); +#else + r = strtod(pNode->u.zJContent, 0); +#endif + sqlite3_result_double(pCtx, r); + break; + } + case JSON_STRING: { +#if 0 /* Never happens because JNODE_RAW is only set by json_set(), + ** json_insert() and json_replace() and those routines do not + ** call jsonReturn() */ + if( pNode->jnFlags & JNODE_RAW ){ + sqlite3_result_text(pCtx, pNode->u.zJContent, pNode->n, + SQLITE_TRANSIENT); + }else +#endif + assert( (pNode->jnFlags & JNODE_RAW)==0 ); + if( (pNode->jnFlags & JNODE_ESCAPE)==0 ){ + /* JSON formatted without any backslash-escapes */ + sqlite3_result_text(pCtx, pNode->u.zJContent+1, pNode->n-2, + SQLITE_TRANSIENT); + }else{ + /* Translate JSON formatted string into raw text */ + u32 i; + u32 n = pNode->n; + const char *z = pNode->u.zJContent; + char *zOut; + u32 j; + zOut = sqlite3_malloc( n+1 ); + if( zOut==0 ){ + sqlite3_result_error_nomem(pCtx); + break; + } + for(i=1, j=0; i>6)); + zOut[j++] = 0x80 | (v&0x3f); + }else{ + zOut[j++] = (char)(0xe0 | (v>>12)); + zOut[j++] = 0x80 | ((v>>6)&0x3f); + zOut[j++] = 0x80 | (v&0x3f); + } + }else{ + if( c=='b' ){ + c = '\b'; + }else if( c=='f' ){ + c = '\f'; + }else if( c=='n' ){ + c = '\n'; + }else if( c=='r' ){ + c = '\r'; + }else if( c=='t' ){ + c = '\t'; + } + zOut[j++] = c; + } + } + } + zOut[j] = 0; + sqlite3_result_text(pCtx, zOut, j, sqlite3_free); + } + break; + } + case JSON_ARRAY: + case JSON_OBJECT: { + jsonReturnJson(pNode, pCtx, aReplace); + break; + } + } +} + +/* Forward reference */ +static int jsonParseAddNode(JsonParse*,u32,u32,const char*); + +/* +** A macro to hint to the compiler that a function should not be +** inlined. +*/ +#if defined(__GNUC__) +# define JSON_NOINLINE __attribute__((noinline)) +#elif defined(_MSC_VER) && _MSC_VER>=1310 +# define JSON_NOINLINE __declspec(noinline) +#else +# define JSON_NOINLINE +#endif + + +static JSON_NOINLINE int jsonParseAddNodeExpand( + JsonParse *pParse, /* Append the node to this object */ + u32 eType, /* Node type */ + u32 n, /* Content size or sub-node count */ + const char *zContent /* Content */ +){ + u32 nNew; + JsonNode *pNew; + assert( pParse->nNode>=pParse->nAlloc ); + if( pParse->oom ) return -1; + nNew = pParse->nAlloc*2 + 10; + pNew = sqlite3_realloc(pParse->aNode, sizeof(JsonNode)*nNew); + if( pNew==0 ){ + pParse->oom = 1; + return -1; + } + pParse->nAlloc = nNew; + pParse->aNode = pNew; + assert( pParse->nNodenAlloc ); + return jsonParseAddNode(pParse, eType, n, zContent); +} + +/* +** Create a new JsonNode instance based on the arguments and append that +** instance to the JsonParse. Return the index in pParse->aNode[] of the +** new node, or -1 if a memory allocation fails. +*/ +static int jsonParseAddNode( + JsonParse *pParse, /* Append the node to this object */ + u32 eType, /* Node type */ + u32 n, /* Content size or sub-node count */ + const char *zContent /* Content */ +){ + JsonNode *p; + if( pParse->nNode>=pParse->nAlloc ){ + return jsonParseAddNodeExpand(pParse, eType, n, zContent); + } + p = &pParse->aNode[pParse->nNode]; + p->eType = (u8)eType; + p->jnFlags = 0; + p->n = n; + p->u.zJContent = zContent; + return pParse->nNode++; +} + +/* +** Return true if z[] begins with 4 (or more) hexadecimal digits +*/ +static int jsonIs4Hex(const char *z){ + int i; + for(i=0; i<4; i++) if( !safe_isxdigit(z[i]) ) return 0; + return 1; +} + +/* +** Parse a single JSON value which begins at pParse->zJson[i]. Return the +** index of the first character past the end of the value parsed. +** +** Return negative for a syntax error. Special cases: return -2 if the +** first non-whitespace character is '}' and return -3 if the first +** non-whitespace character is ']'. +*/ +static int jsonParseValue(JsonParse *pParse, u32 i){ + char c; + u32 j; + int iThis; + int x; + JsonNode *pNode; + const char *z = pParse->zJson; + while( safe_isspace(z[i]) ){ i++; } + if( (c = z[i])=='{' ){ + /* Parse object */ + iThis = jsonParseAddNode(pParse, JSON_OBJECT, 0, 0); + if( iThis<0 ) return -1; + for(j=i+1;;j++){ + while( safe_isspace(z[j]) ){ j++; } + if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1; + x = jsonParseValue(pParse, j); + if( x<0 ){ + pParse->iDepth--; + if( x==(-2) && pParse->nNode==(u32)iThis+1 ) return j+1; + return -1; + } + if( pParse->oom ) return -1; + pNode = &pParse->aNode[pParse->nNode-1]; + if( pNode->eType!=JSON_STRING ) return -1; + pNode->jnFlags |= JNODE_LABEL; + j = x; + while( safe_isspace(z[j]) ){ j++; } + if( z[j]!=':' ) return -1; + j++; + x = jsonParseValue(pParse, j); + pParse->iDepth--; + if( x<0 ) return -1; + j = x; + while( safe_isspace(z[j]) ){ j++; } + c = z[j]; + if( c==',' ) continue; + if( c!='}' ) return -1; + break; + } + pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1; + return j+1; + }else if( c=='[' ){ + /* Parse array */ + iThis = jsonParseAddNode(pParse, JSON_ARRAY, 0, 0); + if( iThis<0 ) return -1; + for(j=i+1;;j++){ + while( safe_isspace(z[j]) ){ j++; } + if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1; + x = jsonParseValue(pParse, j); + pParse->iDepth--; + if( x<0 ){ + if( x==(-3) && pParse->nNode==(u32)iThis+1 ) return j+1; + return -1; + } + j = x; + while( safe_isspace(z[j]) ){ j++; } + c = z[j]; + if( c==',' ) continue; + if( c!=']' ) return -1; + break; + } + pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1; + return j+1; + }else if( c=='"' ){ + /* Parse string */ + u8 jnFlags = 0; + j = i+1; + for(;;){ + c = z[j]; + if( (c & ~0x1f)==0 ){ + /* Control characters are not allowed in strings */ + return -1; + } + if( c=='\\' ){ + c = z[++j]; + if( c=='"' || c=='\\' || c=='/' || c=='b' || c=='f' + || c=='n' || c=='r' || c=='t' + || (c=='u' && jsonIs4Hex(z+j+1)) ){ + jnFlags = JNODE_ESCAPE; + }else{ + return -1; + } + }else if( c=='"' ){ + break; + } + j++; + } + jsonParseAddNode(pParse, JSON_STRING, j+1-i, &z[i]); + if( !pParse->oom ) pParse->aNode[pParse->nNode-1].jnFlags = jnFlags; + return j+1; + }else if( c=='n' + && strncmp(z+i,"null",4)==0 + && !safe_isalnum(z[i+4]) ){ + jsonParseAddNode(pParse, JSON_NULL, 0, 0); + return i+4; + }else if( c=='t' + && strncmp(z+i,"true",4)==0 + && !safe_isalnum(z[i+4]) ){ + jsonParseAddNode(pParse, JSON_TRUE, 0, 0); + return i+4; + }else if( c=='f' + && strncmp(z+i,"false",5)==0 + && !safe_isalnum(z[i+5]) ){ + jsonParseAddNode(pParse, JSON_FALSE, 0, 0); + return i+5; + }else if( c=='-' || (c>='0' && c<='9') ){ + /* Parse number */ + u8 seenDP = 0; + u8 seenE = 0; + assert( '-' < '0' ); + if( c<='0' ){ + j = c=='-' ? i+1 : i; + if( z[j]=='0' && z[j+1]>='0' && z[j+1]<='9' ) return -1; + } + j = i+1; + for(;; j++){ + c = z[j]; + if( c>='0' && c<='9' ) continue; + if( c=='.' ){ + if( z[j-1]=='-' ) return -1; + if( seenDP ) return -1; + seenDP = 1; + continue; + } + if( c=='e' || c=='E' ){ + if( z[j-1]<'0' ) return -1; + if( seenE ) return -1; + seenDP = seenE = 1; + c = z[j+1]; + if( c=='+' || c=='-' ){ + j++; + c = z[j+1]; + } + if( c<'0' || c>'9' ) return -1; + continue; + } + break; + } + if( z[j-1]<'0' ) return -1; + jsonParseAddNode(pParse, seenDP ? JSON_REAL : JSON_INT, + j - i, &z[i]); + return j; + }else if( c=='}' ){ + return -2; /* End of {...} */ + }else if( c==']' ){ + return -3; /* End of [...] */ + }else if( c==0 ){ + return 0; /* End of file */ + }else{ + return -1; /* Syntax error */ + } +} + +/* +** Parse a complete JSON string. Return 0 on success or non-zero if there +** are any errors. If an error occurs, free all memory associated with +** pParse. +** +** pParse is uninitialized when this routine is called. +*/ +static int jsonParse( + JsonParse *pParse, /* Initialize and fill this JsonParse object */ + sqlite3_context *pCtx, /* Report errors here */ + const char *zJson /* Input JSON text to be parsed */ +){ + int i; + memset(pParse, 0, sizeof(*pParse)); + if( zJson==0 ) return 1; + pParse->zJson = zJson; + i = jsonParseValue(pParse, 0); + if( pParse->oom ) i = -1; + if( i>0 ){ + assert( pParse->iDepth==0 ); + while( safe_isspace(zJson[i]) ) i++; + if( zJson[i] ) i = -1; + } + if( i<=0 ){ + if( pCtx!=0 ){ + if( pParse->oom ){ + sqlite3_result_error_nomem(pCtx); + }else{ + sqlite3_result_error(pCtx, "malformed JSON", -1); + } + } + jsonParseReset(pParse); + return 1; + } + return 0; +} + +/* Mark node i of pParse as being a child of iParent. Call recursively +** to fill in all the descendants of node i. +*/ +static void jsonParseFillInParentage(JsonParse *pParse, u32 i, u32 iParent){ + JsonNode *pNode = &pParse->aNode[i]; + u32 j; + pParse->aUp[i] = iParent; + switch( pNode->eType ){ + case JSON_ARRAY: { + for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j)){ + jsonParseFillInParentage(pParse, i+j, i); + } + break; + } + case JSON_OBJECT: { + for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j+1)+1){ + pParse->aUp[i+j] = i; + jsonParseFillInParentage(pParse, i+j+1, i); + } + break; + } + default: { + break; + } + } +} + +/* +** Compute the parentage of all nodes in a completed parse. +*/ +static int jsonParseFindParents(JsonParse *pParse){ + u32 *aUp; + assert( pParse->aUp==0 ); + aUp = pParse->aUp = sqlite3_malloc( sizeof(u32)*pParse->nNode ); + if( aUp==0 ){ + pParse->oom = 1; + return SQLITE_NOMEM; + } + jsonParseFillInParentage(pParse, 0, 0); + return SQLITE_OK; +} + +/* +** Magic number used for the JSON parse cache in sqlite3_get_auxdata() +*/ +#define JSON_CACHE_ID (-429938) /* First cache entry */ +#define JSON_CACHE_SZ 4 /* Max number of cache entries */ + +/* +** Obtain a complete parse of the JSON found in the first argument +** of the argv array. Use the sqlite3_get_auxdata() cache for this +** parse if it is available. If the cache is not available or if it +** is no longer valid, parse the JSON again and return the new parse, +** and also register the new parse so that it will be available for +** future sqlite3_get_auxdata() calls. +*/ +static JsonParse *jsonParseCached( + sqlite3_context *pCtx, + sqlite3_value **argv, + sqlite3_context *pErrCtx +){ + const char *zJson = (const char*)sqlite3_value_text(argv[0]); + int nJson = sqlite3_value_bytes(argv[0]); + JsonParse *p; + JsonParse *pMatch = 0; + int iKey; + int iMinKey = 0; + u32 iMinHold = 0xffffffff; + u32 iMaxHold = 0; + if( zJson==0 ) return 0; + for(iKey=0; iKeynJson==nJson + && memcmp(p->zJson,zJson,nJson)==0 + ){ + p->nErr = 0; + pMatch = p; + }else if( p->iHoldiHold; + iMinKey = iKey; + } + if( p->iHold>iMaxHold ){ + iMaxHold = p->iHold; + } + } + if( pMatch ){ + pMatch->nErr = 0; + pMatch->iHold = iMaxHold+1; + return pMatch; + } + p = sqlite3_malloc( sizeof(*p) + nJson + 1 ); + if( p==0 ){ + sqlite3_result_error_nomem(pCtx); + return 0; + } + memset(p, 0, sizeof(*p)); + p->zJson = (char*)&p[1]; + memcpy((char*)p->zJson, zJson, nJson+1); + if( jsonParse(p, pErrCtx, p->zJson) ){ + sqlite3_free(p); + return 0; + } + p->nJson = nJson; + p->iHold = iMaxHold+1; + sqlite3_set_auxdata(pCtx, JSON_CACHE_ID+iMinKey, p, + (void(*)(void*))jsonParseFree); + return (JsonParse*)sqlite3_get_auxdata(pCtx, JSON_CACHE_ID+iMinKey); +} + +/* +** Compare the OBJECT label at pNode against zKey,nKey. Return true on +** a match. +*/ +static int jsonLabelCompare(JsonNode *pNode, const char *zKey, u32 nKey){ + if( pNode->jnFlags & JNODE_RAW ){ + if( pNode->n!=nKey ) return 0; + return strncmp(pNode->u.zJContent, zKey, nKey)==0; + }else{ + if( pNode->n!=nKey+2 ) return 0; + return strncmp(pNode->u.zJContent+1, zKey, nKey)==0; + } +} + +/* forward declaration */ +static JsonNode *jsonLookupAppend(JsonParse*,const char*,int*,const char**); + +/* +** Search along zPath to find the node specified. Return a pointer +** to that node, or NULL if zPath is malformed or if there is no such +** node. +** +** If pApnd!=0, then try to append new nodes to complete zPath if it is +** possible to do so and if no existing node corresponds to zPath. If +** new nodes are appended *pApnd is set to 1. +*/ +static JsonNode *jsonLookupStep( + JsonParse *pParse, /* The JSON to search */ + u32 iRoot, /* Begin the search at this node */ + const char *zPath, /* The path to search */ + int *pApnd, /* Append nodes to complete path if not NULL */ + const char **pzErr /* Make *pzErr point to any syntax error in zPath */ +){ + u32 i, j, nKey; + const char *zKey; + JsonNode *pRoot = &pParse->aNode[iRoot]; + if( zPath[0]==0 ) return pRoot; + if( zPath[0]=='.' ){ + if( pRoot->eType!=JSON_OBJECT ) return 0; + zPath++; + if( zPath[0]=='"' ){ + zKey = zPath + 1; + for(i=1; zPath[i] && zPath[i]!='"'; i++){} + nKey = i-1; + if( zPath[i] ){ + i++; + }else{ + *pzErr = zPath; + return 0; + } + }else{ + zKey = zPath; + for(i=0; zPath[i] && zPath[i]!='.' && zPath[i]!='['; i++){} + nKey = i; + } + if( nKey==0 ){ + *pzErr = zPath; + return 0; + } + j = 1; + for(;;){ + while( j<=pRoot->n ){ + if( jsonLabelCompare(pRoot+j, zKey, nKey) ){ + return jsonLookupStep(pParse, iRoot+j+1, &zPath[i], pApnd, pzErr); + } + j++; + j += jsonNodeSize(&pRoot[j]); + } + if( (pRoot->jnFlags & JNODE_APPEND)==0 ) break; + iRoot += pRoot->u.iAppend; + pRoot = &pParse->aNode[iRoot]; + j = 1; + } + if( pApnd ){ + u32 iStart, iLabel; + JsonNode *pNode; + iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0); + iLabel = jsonParseAddNode(pParse, JSON_STRING, i, zPath); + zPath += i; + pNode = jsonLookupAppend(pParse, zPath, pApnd, pzErr); + if( pParse->oom ) return 0; + if( pNode ){ + pRoot = &pParse->aNode[iRoot]; + pRoot->u.iAppend = iStart - iRoot; + pRoot->jnFlags |= JNODE_APPEND; + pParse->aNode[iLabel].jnFlags |= JNODE_RAW; + } + return pNode; + } + }else if( zPath[0]=='[' && safe_isdigit(zPath[1]) ){ + if( pRoot->eType!=JSON_ARRAY ) return 0; + i = 0; + j = 1; + while( safe_isdigit(zPath[j]) ){ + i = i*10 + zPath[j] - '0'; + j++; + } + if( zPath[j]!=']' ){ + *pzErr = zPath; + return 0; + } + zPath += j + 1; + j = 1; + for(;;){ + while( j<=pRoot->n && (i>0 || (pRoot[j].jnFlags & JNODE_REMOVE)!=0) ){ + if( (pRoot[j].jnFlags & JNODE_REMOVE)==0 ) i--; + j += jsonNodeSize(&pRoot[j]); + } + if( (pRoot->jnFlags & JNODE_APPEND)==0 ) break; + iRoot += pRoot->u.iAppend; + pRoot = &pParse->aNode[iRoot]; + j = 1; + } + if( j<=pRoot->n ){ + return jsonLookupStep(pParse, iRoot+j, zPath, pApnd, pzErr); + } + if( i==0 && pApnd ){ + u32 iStart; + JsonNode *pNode; + iStart = jsonParseAddNode(pParse, JSON_ARRAY, 1, 0); + pNode = jsonLookupAppend(pParse, zPath, pApnd, pzErr); + if( pParse->oom ) return 0; + if( pNode ){ + pRoot = &pParse->aNode[iRoot]; + pRoot->u.iAppend = iStart - iRoot; + pRoot->jnFlags |= JNODE_APPEND; + } + return pNode; + } + }else{ + *pzErr = zPath; + } + return 0; +} + +/* +** Append content to pParse that will complete zPath. Return a pointer +** to the inserted node, or return NULL if the append fails. +*/ +static JsonNode *jsonLookupAppend( + JsonParse *pParse, /* Append content to the JSON parse */ + const char *zPath, /* Description of content to append */ + int *pApnd, /* Set this flag to 1 */ + const char **pzErr /* Make this point to any syntax error */ +){ + *pApnd = 1; + if( zPath[0]==0 ){ + jsonParseAddNode(pParse, JSON_NULL, 0, 0); + return pParse->oom ? 0 : &pParse->aNode[pParse->nNode-1]; + } + if( zPath[0]=='.' ){ + jsonParseAddNode(pParse, JSON_OBJECT, 0, 0); + }else if( strncmp(zPath,"[0]",3)==0 ){ + jsonParseAddNode(pParse, JSON_ARRAY, 0, 0); + }else{ + return 0; + } + if( pParse->oom ) return 0; + return jsonLookupStep(pParse, pParse->nNode-1, zPath, pApnd, pzErr); +} + +/* +** Return the text of a syntax error message on a JSON path. Space is +** obtained from sqlite3_malloc(). +*/ +static char *jsonPathSyntaxError(const char *zErr){ + return sqlite3_mprintf("JSON path error near '%q'", zErr); +} + +/* +** Do a node lookup using zPath. Return a pointer to the node on success. +** Return NULL if not found or if there is an error. +** +** On an error, write an error message into pCtx and increment the +** pParse->nErr counter. +** +** If pApnd!=NULL then try to append missing nodes and set *pApnd = 1 if +** nodes are appended. +*/ +static JsonNode *jsonLookup( + JsonParse *pParse, /* The JSON to search */ + const char *zPath, /* The path to search */ + int *pApnd, /* Append nodes to complete path if not NULL */ + sqlite3_context *pCtx /* Report errors here, if not NULL */ +){ + const char *zErr = 0; + JsonNode *pNode = 0; + char *zMsg; + + if( zPath==0 ) return 0; + if( zPath[0]!='$' ){ + zErr = zPath; + goto lookup_err; + } + zPath++; + pNode = jsonLookupStep(pParse, 0, zPath, pApnd, &zErr); + if( zErr==0 ) return pNode; + +lookup_err: + pParse->nErr++; + assert( zErr!=0 && pCtx!=0 ); + zMsg = jsonPathSyntaxError(zErr); + if( zMsg ){ + sqlite3_result_error(pCtx, zMsg, -1); + sqlite3_free(zMsg); + }else{ + sqlite3_result_error_nomem(pCtx); + } + return 0; +} + + +/* +** Report the wrong number of arguments for json_insert(), json_replace() +** or json_set(). +*/ +static void jsonWrongNumArgs( + sqlite3_context *pCtx, + const char *zFuncName +){ + char *zMsg = sqlite3_mprintf("json_%s() needs an odd number of arguments", + zFuncName); + sqlite3_result_error(pCtx, zMsg, -1); + sqlite3_free(zMsg); +} + +/* +** Mark all NULL entries in the Object passed in as JNODE_REMOVE. +*/ +static void jsonRemoveAllNulls(JsonNode *pNode){ + int i, n; + assert( pNode->eType==JSON_OBJECT ); + n = pNode->n; + for(i=2; i<=n; i += jsonNodeSize(&pNode[i])+1){ + switch( pNode[i].eType ){ + case JSON_NULL: + pNode[i].jnFlags |= JNODE_REMOVE; + break; + case JSON_OBJECT: + jsonRemoveAllNulls(&pNode[i]); + break; + } + } +} + + +/**************************************************************************** +** SQL functions used for testing and debugging +****************************************************************************/ + +#ifdef SQLITE_DEBUG +/* +** The json_parse(JSON) function returns a string which describes +** a parse of the JSON provided. Or it returns NULL if JSON is not +** well-formed. +*/ +static void jsonParseFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonString s; /* Output string - not real JSON */ + JsonParse x; /* The parse */ + u32 i; + + assert( argc==1 ); + if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; + jsonParseFindParents(&x); + jsonInit(&s, ctx); + for(i=0; inNode ); + if( argc==2 ){ + const char *zPath = (const char*)sqlite3_value_text(argv[1]); + pNode = jsonLookup(p, zPath, 0, ctx); + }else{ + pNode = p->aNode; + } + if( pNode==0 ){ + return; + } + if( pNode->eType==JSON_ARRAY ){ + assert( (pNode->jnFlags & JNODE_APPEND)==0 ); + for(i=1; i<=pNode->n; n++){ + i += jsonNodeSize(&pNode[i]); + } + } + sqlite3_result_int64(ctx, n); +} + +/* +** json_extract(JSON, PATH, ...) +** +** Return the element described by PATH. Return NULL if there is no +** PATH element. If there are multiple PATHs, then return a JSON array +** with the result from each path. Throw an error if the JSON or any PATH +** is malformed. +*/ +static void jsonExtractFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonParse *p; /* The parse */ + JsonNode *pNode; + const char *zPath; + JsonString jx; + int i; + + if( argc<2 ) return; + p = jsonParseCached(ctx, argv, ctx); + if( p==0 ) return; + jsonInit(&jx, ctx); + jsonAppendChar(&jx, '['); + for(i=1; inErr ) break; + if( argc>2 ){ + jsonAppendSeparator(&jx); + if( pNode ){ + jsonRenderNode(pNode, &jx, 0); + }else{ + jsonAppendRaw(&jx, "null", 4); + } + }else if( pNode ){ + jsonReturn(pNode, ctx, 0); + } + } + if( argc>2 && i==argc ){ + jsonAppendChar(&jx, ']'); + jsonResult(&jx); + sqlite3_result_subtype(ctx, JSON_SUBTYPE); + } + jsonReset(&jx); +} + +/* This is the RFC 7396 MergePatch algorithm. +*/ +static JsonNode *jsonMergePatch( + JsonParse *pParse, /* The JSON parser that contains the TARGET */ + u32 iTarget, /* Node of the TARGET in pParse */ + JsonNode *pPatch /* The PATCH */ +){ + u32 i, j; + u32 iRoot; + JsonNode *pTarget; + if( pPatch->eType!=JSON_OBJECT ){ + return pPatch; + } + assert( iTarget>=0 && iTargetnNode ); + pTarget = &pParse->aNode[iTarget]; + assert( (pPatch->jnFlags & JNODE_APPEND)==0 ); + if( pTarget->eType!=JSON_OBJECT ){ + jsonRemoveAllNulls(pPatch); + return pPatch; + } + iRoot = iTarget; + for(i=1; in; i += jsonNodeSize(&pPatch[i+1])+1){ + u32 nKey; + const char *zKey; + assert( pPatch[i].eType==JSON_STRING ); + assert( pPatch[i].jnFlags & JNODE_LABEL ); + nKey = pPatch[i].n; + zKey = pPatch[i].u.zJContent; + assert( (pPatch[i].jnFlags & JNODE_RAW)==0 ); + for(j=1; jn; j += jsonNodeSize(&pTarget[j+1])+1 ){ + assert( pTarget[j].eType==JSON_STRING ); + assert( pTarget[j].jnFlags & JNODE_LABEL ); + assert( (pPatch[i].jnFlags & JNODE_RAW)==0 ); + if( pTarget[j].n==nKey && strncmp(pTarget[j].u.zJContent,zKey,nKey)==0 ){ + if( pTarget[j+1].jnFlags & (JNODE_REMOVE|JNODE_PATCH) ) break; + if( pPatch[i+1].eType==JSON_NULL ){ + pTarget[j+1].jnFlags |= JNODE_REMOVE; + }else{ + JsonNode *pNew = jsonMergePatch(pParse, iTarget+j+1, &pPatch[i+1]); + if( pNew==0 ) return 0; + pTarget = &pParse->aNode[iTarget]; + if( pNew!=&pTarget[j+1] ){ + pTarget[j+1].u.pPatch = pNew; + pTarget[j+1].jnFlags |= JNODE_PATCH; + } + } + break; + } + } + if( j>=pTarget->n && pPatch[i+1].eType!=JSON_NULL ){ + int iStart, iPatch; + iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0); + jsonParseAddNode(pParse, JSON_STRING, nKey, zKey); + iPatch = jsonParseAddNode(pParse, JSON_TRUE, 0, 0); + if( pParse->oom ) return 0; + jsonRemoveAllNulls(pPatch); + pTarget = &pParse->aNode[iTarget]; + pParse->aNode[iRoot].jnFlags |= JNODE_APPEND; + pParse->aNode[iRoot].u.iAppend = iStart - iRoot; + iRoot = iStart; + pParse->aNode[iPatch].jnFlags |= JNODE_PATCH; + pParse->aNode[iPatch].u.pPatch = &pPatch[i+1]; + } + } + return pTarget; +} + +/* +** Implementation of the json_mergepatch(JSON1,JSON2) function. Return a JSON +** object that is the result of running the RFC 7396 MergePatch() algorithm +** on the two arguments. +*/ +static void jsonPatchFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonParse x; /* The JSON that is being patched */ + JsonParse y; /* The patch */ + JsonNode *pResult; /* The result of the merge */ + + UNUSED_PARAM(argc); + if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; + if( jsonParse(&y, ctx, (const char*)sqlite3_value_text(argv[1])) ){ + jsonParseReset(&x); + return; + } + pResult = jsonMergePatch(&x, 0, y.aNode); + assert( pResult!=0 || x.oom ); + if( pResult ){ + jsonReturnJson(pResult, ctx, 0); + }else{ + sqlite3_result_error_nomem(ctx); + } + jsonParseReset(&x); + jsonParseReset(&y); +} + + +/* +** Implementation of the json_object(NAME,VALUE,...) function. Return a JSON +** object that contains all name/value given in arguments. Or if any name +** is not a string or if any value is a BLOB, throw an error. +*/ +static void jsonObjectFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + int i; + JsonString jx; + const char *z; + u32 n; + + if( argc&1 ){ + sqlite3_result_error(ctx, "json_object() requires an even number " + "of arguments", -1); + return; + } + jsonInit(&jx, ctx); + jsonAppendChar(&jx, '{'); + for(i=0; ijnFlags |= JNODE_REMOVE; + } + if( (x.aNode[0].jnFlags & JNODE_REMOVE)==0 ){ + jsonReturnJson(x.aNode, ctx, 0); + } +remove_done: + jsonParseReset(&x); +} + +/* +** json_replace(JSON, PATH, VALUE, ...) +** +** Replace the value at PATH with VALUE. If PATH does not already exist, +** this routine is a no-op. If JSON or PATH is malformed, throw an error. +*/ +static void jsonReplaceFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonParse x; /* The parse */ + JsonNode *pNode; + const char *zPath; + u32 i; + + if( argc<1 ) return; + if( (argc&1)==0 ) { + jsonWrongNumArgs(ctx, "replace"); + return; + } + if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; + assert( x.nNode ); + for(i=1; i<(u32)argc; i+=2){ + zPath = (const char*)sqlite3_value_text(argv[i]); + pNode = jsonLookup(&x, zPath, 0, ctx); + if( x.nErr ) goto replace_err; + if( pNode ){ + pNode->jnFlags |= (u8)JNODE_REPLACE; + pNode->u.iReplace = i + 1; + } + } + if( x.aNode[0].jnFlags & JNODE_REPLACE ){ + sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]); + }else{ + jsonReturnJson(x.aNode, ctx, argv); + } +replace_err: + jsonParseReset(&x); +} + +/* +** json_set(JSON, PATH, VALUE, ...) +** +** Set the value at PATH to VALUE. Create the PATH if it does not already +** exist. Overwrite existing values that do exist. +** If JSON or PATH is malformed, throw an error. +** +** json_insert(JSON, PATH, VALUE, ...) +** +** Create PATH and initialize it to VALUE. If PATH already exists, this +** routine is a no-op. If JSON or PATH is malformed, throw an error. +*/ +static void jsonSetFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonParse x; /* The parse */ + JsonNode *pNode; + const char *zPath; + u32 i; + int bApnd; + int bIsSet = *(int*)sqlite3_user_data(ctx); + + if( argc<1 ) return; + if( (argc&1)==0 ) { + jsonWrongNumArgs(ctx, bIsSet ? "set" : "insert"); + return; + } + if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; + assert( x.nNode ); + for(i=1; i<(u32)argc; i+=2){ + zPath = (const char*)sqlite3_value_text(argv[i]); + bApnd = 0; + pNode = jsonLookup(&x, zPath, &bApnd, ctx); + if( x.oom ){ + sqlite3_result_error_nomem(ctx); + goto jsonSetDone; + }else if( x.nErr ){ + goto jsonSetDone; + }else if( pNode && (bApnd || bIsSet) ){ + pNode->jnFlags |= (u8)JNODE_REPLACE; + pNode->u.iReplace = i + 1; + } + } + if( x.aNode[0].jnFlags & JNODE_REPLACE ){ + sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]); + }else{ + jsonReturnJson(x.aNode, ctx, argv); + } +jsonSetDone: + jsonParseReset(&x); +} + +/* +** json_type(JSON) +** json_type(JSON, PATH) +** +** Return the top-level "type" of a JSON string. Throw an error if +** either the JSON or PATH inputs are not well-formed. +*/ +static void jsonTypeFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonParse *p; /* The parse */ + const char *zPath; + JsonNode *pNode; + + p = jsonParseCached(ctx, argv, ctx); + if( p==0 ) return; + if( argc==2 ){ + zPath = (const char*)sqlite3_value_text(argv[1]); + pNode = jsonLookup(p, zPath, 0, ctx); + }else{ + pNode = p->aNode; + } + if( pNode ){ + sqlite3_result_text(ctx, jsonType[pNode->eType], -1, SQLITE_STATIC); + } +} + +/* +** json_valid(JSON) +** +** Return 1 if JSON is a well-formed JSON string according to RFC-7159. +** Return 0 otherwise. +*/ +static void jsonValidFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonParse *p; /* The parse */ + UNUSED_PARAM(argc); + p = jsonParseCached(ctx, argv, 0); + sqlite3_result_int(ctx, p!=0); +} + + +/**************************************************************************** +** Aggregate SQL function implementations +****************************************************************************/ +/* +** json_group_array(VALUE) +** +** Return a JSON array composed of all values in the aggregate. +*/ +static void jsonArrayStep( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonString *pStr; + UNUSED_PARAM(argc); + pStr = (JsonString*)sqlite3_aggregate_context(ctx, sizeof(*pStr)); + if( pStr ){ + if( pStr->zBuf==0 ){ + jsonInit(pStr, ctx); + jsonAppendChar(pStr, '['); + }else{ + jsonAppendChar(pStr, ','); + pStr->pCtx = ctx; + } + jsonAppendValue(pStr, argv[0]); + } +} +static void jsonArrayCompute(sqlite3_context *ctx, int isFinal){ + JsonString *pStr; + pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0); + if( pStr ){ + pStr->pCtx = ctx; + jsonAppendChar(pStr, ']'); + if( pStr->bErr ){ + if( pStr->bErr==1 ) sqlite3_result_error_nomem(ctx); + assert( pStr->bStatic ); + }else if( isFinal ){ + sqlite3_result_text(ctx, pStr->zBuf, (int)pStr->nUsed, + pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free); + pStr->bStatic = 1; + }else{ + sqlite3_result_text(ctx, pStr->zBuf, (int)pStr->nUsed, SQLITE_TRANSIENT); + pStr->nUsed--; + } + }else{ + sqlite3_result_text(ctx, "[]", 2, SQLITE_STATIC); + } + sqlite3_result_subtype(ctx, JSON_SUBTYPE); +} +static void jsonArrayValue(sqlite3_context *ctx){ + jsonArrayCompute(ctx, 0); +} +static void jsonArrayFinal(sqlite3_context *ctx){ + jsonArrayCompute(ctx, 1); +} + +#ifndef SQLITE_OMIT_WINDOWFUNC +/* +** This method works for both json_group_array() and json_group_object(). +** It works by removing the first element of the group by searching forward +** to the first comma (",") that is not within a string and deleting all +** text through that comma. +*/ +static void jsonGroupInverse( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + int i; + int inStr = 0; + char *z; + JsonString *pStr; + UNUSED_PARAM(argc); + UNUSED_PARAM(argv); + pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0); +#ifdef NEVER + /* pStr is always non-NULL since jsonArrayStep() or jsonObjectStep() will + ** always have been called to initalize it */ + if( NEVER(!pStr) ) return; +#endif + z = pStr->zBuf; + for(i=1; z[i]!=',' || inStr; i++){ + assert( inUsed ); + if( z[i]=='"' ){ + inStr = !inStr; + }else if( z[i]=='\\' ){ + i++; + } + } + pStr->nUsed -= i; + memmove(&z[1], &z[i+1], (size_t)pStr->nUsed-1); +} +#else +# define jsonGroupInverse 0 +#endif + + +/* +** json_group_obj(NAME,VALUE) +** +** Return a JSON object composed of all names and values in the aggregate. +*/ +static void jsonObjectStep( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonString *pStr; + const char *z; + u32 n; + UNUSED_PARAM(argc); + pStr = (JsonString*)sqlite3_aggregate_context(ctx, sizeof(*pStr)); + if( pStr ){ + if( pStr->zBuf==0 ){ + jsonInit(pStr, ctx); + jsonAppendChar(pStr, '{'); + }else{ + jsonAppendChar(pStr, ','); + pStr->pCtx = ctx; + } + z = (const char*)sqlite3_value_text(argv[0]); + n = (u32)sqlite3_value_bytes(argv[0]); + jsonAppendString(pStr, z, n); + jsonAppendChar(pStr, ':'); + jsonAppendValue(pStr, argv[1]); + } +} +static void jsonObjectCompute(sqlite3_context *ctx, int isFinal){ + JsonString *pStr; + pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0); + if( pStr ){ + jsonAppendChar(pStr, '}'); + if( pStr->bErr ){ + if( pStr->bErr==1 ) sqlite3_result_error_nomem(ctx); + assert( pStr->bStatic ); + }else if( isFinal ){ + sqlite3_result_text(ctx, pStr->zBuf, (int)pStr->nUsed, + pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free); + pStr->bStatic = 1; + }else{ + sqlite3_result_text(ctx, pStr->zBuf, (int)pStr->nUsed, SQLITE_TRANSIENT); + pStr->nUsed--; + } + }else{ + sqlite3_result_text(ctx, "{}", 2, SQLITE_STATIC); + } + sqlite3_result_subtype(ctx, JSON_SUBTYPE); +} +static void jsonObjectValue(sqlite3_context *ctx){ + jsonObjectCompute(ctx, 0); +} +static void jsonObjectFinal(sqlite3_context *ctx){ + jsonObjectCompute(ctx, 1); +} + + + +#ifndef SQLITE_OMIT_VIRTUALTABLE +/**************************************************************************** +** The json_each virtual table +****************************************************************************/ +typedef struct JsonEachCursor JsonEachCursor; +struct JsonEachCursor { + sqlite3_vtab_cursor base; /* Base class - must be first */ + u32 iRowid; /* The rowid */ + u32 iBegin; /* The first node of the scan */ + u32 i; /* Index in sParse.aNode[] of current row */ + u32 iEnd; /* EOF when i equals or exceeds this value */ + u8 eType; /* Type of top-level element */ + u8 bRecursive; /* True for json_tree(). False for json_each() */ + char *zJson; /* Input JSON */ + char *zRoot; /* Path by which to filter zJson */ + JsonParse sParse; /* Parse of the input JSON */ +}; + +/* Constructor for the json_each virtual table */ +static int jsonEachConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + sqlite3_vtab *pNew; + int rc; + +/* Column numbers */ +#define JEACH_KEY 0 +#define JEACH_VALUE 1 +#define JEACH_TYPE 2 +#define JEACH_ATOM 3 +#define JEACH_ID 4 +#define JEACH_PARENT 5 +#define JEACH_FULLKEY 6 +#define JEACH_PATH 7 +/* The xBestIndex method assumes that the JSON and ROOT columns are +** the last two columns in the table. Should this ever changes, be +** sure to update the xBestIndex method. */ +#define JEACH_JSON 8 +#define JEACH_ROOT 9 + + UNUSED_PARAM(pzErr); + UNUSED_PARAM(argv); + UNUSED_PARAM(argc); + UNUSED_PARAM(pAux); + rc = sqlite3_declare_vtab(db, + "CREATE TABLE x(key,value,type,atom,id,parent,fullkey,path," + "json HIDDEN,root HIDDEN)"); + if( rc==SQLITE_OK ){ + pNew = *ppVtab = sqlite3_malloc( sizeof(*pNew) ); + if( pNew==0 ) return SQLITE_NOMEM; + memset(pNew, 0, sizeof(*pNew)); + } + return rc; +} + +/* destructor for json_each virtual table */ +static int jsonEachDisconnect(sqlite3_vtab *pVtab){ + sqlite3_free(pVtab); + return SQLITE_OK; +} + +/* constructor for a JsonEachCursor object for json_each(). */ +static int jsonEachOpenEach(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCursor){ + JsonEachCursor *pCur; + + UNUSED_PARAM(p); + pCur = sqlite3_malloc( sizeof(*pCur) ); + if( pCur==0 ) return SQLITE_NOMEM; + memset(pCur, 0, sizeof(*pCur)); + *ppCursor = &pCur->base; + return SQLITE_OK; +} + +/* constructor for a JsonEachCursor object for json_tree(). */ +static int jsonEachOpenTree(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCursor){ + int rc = jsonEachOpenEach(p, ppCursor); + if( rc==SQLITE_OK ){ + JsonEachCursor *pCur = (JsonEachCursor*)*ppCursor; + pCur->bRecursive = 1; + } + return rc; +} + +/* Reset a JsonEachCursor back to its original state. Free any memory +** held. */ +static void jsonEachCursorReset(JsonEachCursor *p){ + sqlite3_free(p->zJson); + sqlite3_free(p->zRoot); + jsonParseReset(&p->sParse); + p->iRowid = 0; + p->i = 0; + p->iEnd = 0; + p->eType = 0; + p->zJson = 0; + p->zRoot = 0; +} + +/* Destructor for a jsonEachCursor object */ +static int jsonEachClose(sqlite3_vtab_cursor *cur){ + JsonEachCursor *p = (JsonEachCursor*)cur; + jsonEachCursorReset(p); + sqlite3_free(cur); + return SQLITE_OK; +} + +/* Return TRUE if the jsonEachCursor object has been advanced off the end +** of the JSON object */ +static int jsonEachEof(sqlite3_vtab_cursor *cur){ + JsonEachCursor *p = (JsonEachCursor*)cur; + return p->i >= p->iEnd; +} + +/* Advance the cursor to the next element for json_tree() */ +static int jsonEachNext(sqlite3_vtab_cursor *cur){ + JsonEachCursor *p = (JsonEachCursor*)cur; + if( p->bRecursive ){ + if( p->sParse.aNode[p->i].jnFlags & JNODE_LABEL ) p->i++; + p->i++; + p->iRowid++; + if( p->iiEnd ){ + u32 iUp = p->sParse.aUp[p->i]; + JsonNode *pUp = &p->sParse.aNode[iUp]; + p->eType = pUp->eType; + if( pUp->eType==JSON_ARRAY ){ + if( iUp==p->i-1 ){ + pUp->u.iKey = 0; + }else{ + pUp->u.iKey++; + } + } + } + }else{ + switch( p->eType ){ + case JSON_ARRAY: { + p->i += jsonNodeSize(&p->sParse.aNode[p->i]); + p->iRowid++; + break; + } + case JSON_OBJECT: { + p->i += 1 + jsonNodeSize(&p->sParse.aNode[p->i+1]); + p->iRowid++; + break; + } + default: { + p->i = p->iEnd; + break; + } + } + } + return SQLITE_OK; +} + +/* Append the name of the path for element i to pStr +*/ +static void jsonEachComputePath( + JsonEachCursor *p, /* The cursor */ + JsonString *pStr, /* Write the path here */ + u32 i /* Path to this element */ +){ + JsonNode *pNode, *pUp; + u32 iUp; + if( i==0 ){ + jsonAppendChar(pStr, '$'); + return; + } + iUp = p->sParse.aUp[i]; + jsonEachComputePath(p, pStr, iUp); + pNode = &p->sParse.aNode[i]; + pUp = &p->sParse.aNode[iUp]; + if( pUp->eType==JSON_ARRAY ){ + jsonPrintf(30, pStr, "[%d]", pUp->u.iKey); + }else{ + assert( pUp->eType==JSON_OBJECT ); + if( (pNode->jnFlags & JNODE_LABEL)==0 ) pNode--; + assert( pNode->eType==JSON_STRING ); + assert( pNode->jnFlags & JNODE_LABEL ); + jsonPrintf(pNode->n+1, pStr, ".%.*s", pNode->n-2, pNode->u.zJContent+1); + } +} + +/* Return the value of a column */ +static int jsonEachColumn( + sqlite3_vtab_cursor *cur, /* The cursor */ + sqlite3_context *ctx, /* First argument to sqlite3_result_...() */ + int i /* Which column to return */ +){ + JsonEachCursor *p = (JsonEachCursor*)cur; + JsonNode *pThis = &p->sParse.aNode[p->i]; + switch( i ){ + case JEACH_KEY: { + if( p->i==0 ) break; + if( p->eType==JSON_OBJECT ){ + jsonReturn(pThis, ctx, 0); + }else if( p->eType==JSON_ARRAY ){ + u32 iKey; + if( p->bRecursive ){ + if( p->iRowid==0 ) break; + iKey = p->sParse.aNode[p->sParse.aUp[p->i]].u.iKey; + }else{ + iKey = p->iRowid; + } + sqlite3_result_int64(ctx, (sqlite3_int64)iKey); + } + break; + } + case JEACH_VALUE: { + if( pThis->jnFlags & JNODE_LABEL ) pThis++; + jsonReturn(pThis, ctx, 0); + break; + } + case JEACH_TYPE: { + if( pThis->jnFlags & JNODE_LABEL ) pThis++; + sqlite3_result_text(ctx, jsonType[pThis->eType], -1, SQLITE_STATIC); + break; + } + case JEACH_ATOM: { + if( pThis->jnFlags & JNODE_LABEL ) pThis++; + if( pThis->eType>=JSON_ARRAY ) break; + jsonReturn(pThis, ctx, 0); + break; + } + case JEACH_ID: { + sqlite3_result_int64(ctx, + (sqlite3_int64)p->i + ((pThis->jnFlags & JNODE_LABEL)!=0)); + break; + } + case JEACH_PARENT: { + if( p->i>p->iBegin && p->bRecursive ){ + sqlite3_result_int64(ctx, (sqlite3_int64)p->sParse.aUp[p->i]); + } + break; + } + case JEACH_FULLKEY: { + JsonString x; + jsonInit(&x, ctx); + if( p->bRecursive ){ + jsonEachComputePath(p, &x, p->i); + }else{ + if( p->zRoot ){ + jsonAppendRaw(&x, p->zRoot, (int)strlen(p->zRoot)); + }else{ + jsonAppendChar(&x, '$'); + } + if( p->eType==JSON_ARRAY ){ + jsonPrintf(30, &x, "[%d]", p->iRowid); + }else if( p->eType==JSON_OBJECT ){ + jsonPrintf(pThis->n, &x, ".%.*s", pThis->n-2, pThis->u.zJContent+1); + } + } + jsonResult(&x); + break; + } + case JEACH_PATH: { + if( p->bRecursive ){ + JsonString x; + jsonInit(&x, ctx); + jsonEachComputePath(p, &x, p->sParse.aUp[p->i]); + jsonResult(&x); + break; + } + /* For json_each() path and root are the same so fall through + ** into the root case */ + } + default: { + const char *zRoot = p->zRoot; + if( zRoot==0 ) zRoot = "$"; + sqlite3_result_text(ctx, zRoot, -1, SQLITE_STATIC); + break; + } + case JEACH_JSON: { + assert( i==JEACH_JSON ); + sqlite3_result_text(ctx, p->sParse.zJson, -1, SQLITE_STATIC); + break; + } + } + return SQLITE_OK; +} + +/* Return the current rowid value */ +static int jsonEachRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ + JsonEachCursor *p = (JsonEachCursor*)cur; + *pRowid = p->iRowid; + return SQLITE_OK; +} + +/* The query strategy is to look for an equality constraint on the json +** column. Without such a constraint, the table cannot operate. idxNum is +** 1 if the constraint is found, 3 if the constraint and zRoot are found, +** and 0 otherwise. +*/ +static int jsonEachBestIndex( + sqlite3_vtab *tab, + sqlite3_index_info *pIdxInfo +){ + int i; /* Loop counter or computed array index */ + int aIdx[2]; /* Index of constraints for JSON and ROOT */ + int unusableMask = 0; /* Mask of unusable JSON and ROOT constraints */ + int idxMask = 0; /* Mask of usable == constraints JSON and ROOT */ + const struct sqlite3_index_constraint *pConstraint; + + /* This implementation assumes that JSON and ROOT are the last two + ** columns in the table */ + assert( JEACH_ROOT == JEACH_JSON+1 ); + UNUSED_PARAM(tab); + aIdx[0] = aIdx[1] = -1; + pConstraint = pIdxInfo->aConstraint; + for(i=0; inConstraint; i++, pConstraint++){ + int iCol; + int iMask; + if( pConstraint->iColumn < JEACH_JSON ) continue; + iCol = pConstraint->iColumn - JEACH_JSON; + assert( iCol==0 || iCol==1 ); + iMask = 1 << iCol; + if( pConstraint->usable==0 ){ + unusableMask |= iMask; + }else if( pConstraint->op==SQLITE_INDEX_CONSTRAINT_EQ ){ + aIdx[iCol] = i; + idxMask |= iMask; + } + } + if( (unusableMask & ~idxMask)!=0 ){ + /* If there are any unusable constraints on JSON or ROOT, then reject + ** this entire plan */ + return SQLITE_CONSTRAINT; + } + if( aIdx[0]<0 ){ + /* No JSON input. Leave estimatedCost at the huge value that it was + ** initialized to to discourage the query planner from selecting this + ** plan. */ + pIdxInfo->idxNum = 0; + }else{ + pIdxInfo->estimatedCost = 1.0; + i = aIdx[0]; + pIdxInfo->aConstraintUsage[i].argvIndex = 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + if( aIdx[1]<0 ){ + pIdxInfo->idxNum = 1; /* Only JSON supplied. Plan 1 */ + }else{ + i = aIdx[1]; + pIdxInfo->aConstraintUsage[i].argvIndex = 2; + pIdxInfo->aConstraintUsage[i].omit = 1; + pIdxInfo->idxNum = 3; /* Both JSON and ROOT are supplied. Plan 3 */ + } + } + return SQLITE_OK; +} + +/* Start a search on a new JSON string */ +static int jsonEachFilter( + sqlite3_vtab_cursor *cur, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + JsonEachCursor *p = (JsonEachCursor*)cur; + const char *z; + const char *zRoot = 0; + sqlite3_int64 n; + + UNUSED_PARAM(idxStr); + UNUSED_PARAM(argc); + jsonEachCursorReset(p); + if( idxNum==0 ) return SQLITE_OK; + z = (const char*)sqlite3_value_text(argv[0]); + if( z==0 ) return SQLITE_OK; + n = sqlite3_value_bytes(argv[0]); + p->zJson = sqlite3_malloc64( n+1 ); + if( p->zJson==0 ) return SQLITE_NOMEM; + memcpy(p->zJson, z, (size_t)n+1); + if( jsonParse(&p->sParse, 0, p->zJson) ){ + int rc = SQLITE_NOMEM; + if( p->sParse.oom==0 ){ + sqlite3_free(cur->pVtab->zErrMsg); + cur->pVtab->zErrMsg = sqlite3_mprintf("malformed JSON"); + if( cur->pVtab->zErrMsg ) rc = SQLITE_ERROR; + } + jsonEachCursorReset(p); + return rc; + }else if( p->bRecursive && jsonParseFindParents(&p->sParse) ){ + jsonEachCursorReset(p); + return SQLITE_NOMEM; + }else{ + JsonNode *pNode = 0; + if( idxNum==3 ){ + const char *zErr = 0; + zRoot = (const char*)sqlite3_value_text(argv[1]); + if( zRoot==0 ) return SQLITE_OK; + n = sqlite3_value_bytes(argv[1]); + p->zRoot = sqlite3_malloc64( n+1 ); + if( p->zRoot==0 ) return SQLITE_NOMEM; + memcpy(p->zRoot, zRoot, (size_t)n+1); + if( zRoot[0]!='$' ){ + zErr = zRoot; + }else{ + pNode = jsonLookupStep(&p->sParse, 0, p->zRoot+1, 0, &zErr); + } + if( zErr ){ + sqlite3_free(cur->pVtab->zErrMsg); + cur->pVtab->zErrMsg = jsonPathSyntaxError(zErr); + jsonEachCursorReset(p); + return cur->pVtab->zErrMsg ? SQLITE_ERROR : SQLITE_NOMEM; + }else if( pNode==0 ){ + return SQLITE_OK; + } + }else{ + pNode = p->sParse.aNode; + } + p->iBegin = p->i = (int)(pNode - p->sParse.aNode); + p->eType = pNode->eType; + if( p->eType>=JSON_ARRAY ){ + pNode->u.iKey = 0; + p->iEnd = p->i + pNode->n + 1; + if( p->bRecursive ){ + p->eType = p->sParse.aNode[p->sParse.aUp[p->i]].eType; + if( p->i>0 && (p->sParse.aNode[p->i-1].jnFlags & JNODE_LABEL)!=0 ){ + p->i--; + } + }else{ + p->i++; + } + }else{ + p->iEnd = p->i+1; + } + } + return SQLITE_OK; +} + +/* The methods of the json_each virtual table */ +static sqlite3_module jsonEachModule = { + 0, /* iVersion */ + 0, /* xCreate */ + jsonEachConnect, /* xConnect */ + jsonEachBestIndex, /* xBestIndex */ + jsonEachDisconnect, /* xDisconnect */ + 0, /* xDestroy */ + jsonEachOpenEach, /* xOpen - open a cursor */ + jsonEachClose, /* xClose - close a cursor */ + jsonEachFilter, /* xFilter - configure scan constraints */ + jsonEachNext, /* xNext - advance a cursor */ + jsonEachEof, /* xEof - check for end of scan */ + jsonEachColumn, /* xColumn - read data */ + jsonEachRowid, /* xRowid - read data */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ + 0 /* xShadowName */ +}; + +/* The methods of the json_tree virtual table. */ +static sqlite3_module jsonTreeModule = { + 0, /* iVersion */ + 0, /* xCreate */ + jsonEachConnect, /* xConnect */ + jsonEachBestIndex, /* xBestIndex */ + jsonEachDisconnect, /* xDisconnect */ + 0, /* xDestroy */ + jsonEachOpenTree, /* xOpen - open a cursor */ + jsonEachClose, /* xClose - close a cursor */ + jsonEachFilter, /* xFilter - configure scan constraints */ + jsonEachNext, /* xNext - advance a cursor */ + jsonEachEof, /* xEof - check for end of scan */ + jsonEachColumn, /* xColumn - read data */ + jsonEachRowid, /* xRowid - read data */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ + 0 /* xShadowName */ +}; +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + +/**************************************************************************** +** The following routines are the only publically visible identifiers in this +** file. Call the following routines in order to register the various SQL +** functions and the virtual table implemented by this file. +****************************************************************************/ + +SQLITE_PRIVATE int sqlite3Json1Init(sqlite3 *db){ + int rc = SQLITE_OK; + unsigned int i; + static const struct { + const char *zName; + int nArg; + int flag; + void (*xFunc)(sqlite3_context*,int,sqlite3_value**); + } aFunc[] = { + { "json", 1, 0, jsonRemoveFunc }, + { "json_array", -1, 0, jsonArrayFunc }, + { "json_array_length", 1, 0, jsonArrayLengthFunc }, + { "json_array_length", 2, 0, jsonArrayLengthFunc }, + { "json_extract", -1, 0, jsonExtractFunc }, + { "json_insert", -1, 0, jsonSetFunc }, + { "json_object", -1, 0, jsonObjectFunc }, + { "json_patch", 2, 0, jsonPatchFunc }, + { "json_quote", 1, 0, jsonQuoteFunc }, + { "json_remove", -1, 0, jsonRemoveFunc }, + { "json_replace", -1, 0, jsonReplaceFunc }, + { "json_set", -1, 1, jsonSetFunc }, + { "json_type", 1, 0, jsonTypeFunc }, + { "json_type", 2, 0, jsonTypeFunc }, + { "json_valid", 1, 0, jsonValidFunc }, + +#if SQLITE_DEBUG + /* DEBUG and TESTING functions */ + { "json_parse", 1, 0, jsonParseFunc }, + { "json_test1", 1, 0, jsonTest1Func }, +#endif + }; + static const struct { + const char *zName; + int nArg; + void (*xStep)(sqlite3_context*,int,sqlite3_value**); + void (*xFinal)(sqlite3_context*); + void (*xValue)(sqlite3_context*); + } aAgg[] = { + { "json_group_array", 1, + jsonArrayStep, jsonArrayFinal, jsonArrayValue }, + { "json_group_object", 2, + jsonObjectStep, jsonObjectFinal, jsonObjectValue }, + }; +#ifndef SQLITE_OMIT_VIRTUALTABLE + static const struct { + const char *zName; + sqlite3_module *pModule; + } aMod[] = { + { "json_each", &jsonEachModule }, + { "json_tree", &jsonTreeModule }, + }; +#endif + for(i=0; inRef>0 ); p->nRef++; } } @@ -165845,6 +179729,7 @@ memset(pNode, 0, sizeof(RtreeNode) + pRtree->iNodeSize); pNode->zData = (u8 *)&pNode[1]; pNode->nRef = 1; + pRtree->nNodeRef++; pNode->pParent = pParent; pNode->isDirty = 1; nodeReference(pParent); @@ -165878,10 +179763,10 @@ /* Check if the requested node is already in the hash table. If so, ** increase its reference count and return it. */ - if( (pNode = nodeHashLookup(pRtree, iNode)) ){ + if( (pNode = nodeHashLookup(pRtree, iNode))!=0 ){ assert( !pParent || !pNode->pParent || pNode->pParent==pParent ); if( pParent && !pNode->pParent ){ - nodeReference(pParent); + pParent->nRef++; pNode->pParent = pParent; } pNode->nRef++; @@ -165920,6 +179805,7 @@ pNode->pParent = pParent; pNode->zData = (u8 *)&pNode[1]; pNode->nRef = 1; + pRtree->nNodeRef++; pNode->iNode = iNode; pNode->isDirty = 0; pNode->pNext = 0; @@ -165960,7 +179846,10 @@ } *ppNode = pNode; }else{ - sqlite3_free(pNode); + if( pNode ){ + pRtree->nNodeRef--; + sqlite3_free(pNode); + } *ppNode = 0; } @@ -166040,6 +179929,7 @@ sqlite3_step(p); pNode->isDirty = 0; rc = sqlite3_reset(p); + sqlite3_bind_null(p, 2); if( pNode->iNode==0 && rc==SQLITE_OK ){ pNode->iNode = sqlite3_last_insert_rowid(pRtree->db); nodeHashInsert(pRtree, pNode); @@ -166056,8 +179946,10 @@ int rc = SQLITE_OK; if( pNode ){ assert( pNode->nRef>0 ); + assert( pRtree->nNodeRef>0 ); pNode->nRef--; if( pNode->nRef==0 ){ + pRtree->nNodeRef--; if( pNode->iNode==1 ){ pRtree->iDepth = -1; } @@ -166174,8 +180066,9 @@ pRtree->nBusy--; if( pRtree->nBusy==0 ){ pRtree->inWrTrans = 0; - pRtree->nCursor = 0; + assert( pRtree->nCursor==0 ); nodeBlobReset(pRtree); + assert( pRtree->nNodeRef==0 ); sqlite3_finalize(pRtree->pWriteNode); sqlite3_finalize(pRtree->pDeleteNode); sqlite3_finalize(pRtree->pReadRowid); @@ -166184,6 +180077,8 @@ sqlite3_finalize(pRtree->pReadParent); sqlite3_finalize(pRtree->pWriteParent); sqlite3_finalize(pRtree->pDeleteParent); + sqlite3_finalize(pRtree->pWriteAux); + sqlite3_free(pRtree->zReadAuxSql); sqlite3_free(pRtree); } } @@ -166272,6 +180167,7 @@ RtreeCursor *pCsr = (RtreeCursor *)cur; assert( pRtree->nCursor>0 ); freeCursorConstraints(pCsr); + sqlite3_finalize(pCsr->pReadAux); sqlite3_free(pCsr->aPoint); for(ii=0; iiaNode[ii]); sqlite3_free(pCsr); @@ -166643,7 +180539,7 @@ if( iiaNode[ii]==0 ); pCur->aNode[ii] = pCur->aNode[0]; - }else{ + }else{ nodeRelease(RTREE_OF_CURSOR(pCur), pCur->aNode[0]); } pCur->aNode[0] = 0; @@ -166814,6 +180710,10 @@ /* Move to the next entry that matches the configured constraints. */ RTREE_QUEUE_TRACE(pCsr, "POP-Nx:"); + if( pCsr->bAuxValid ){ + pCsr->bAuxValid = 0; + sqlite3_reset(pCsr->pReadAux); + } rtreeSearchPointPop(pCsr); rc = rtreeStepToLeaf(pCsr); return rc; @@ -166848,7 +180748,7 @@ if( p==0 ) return SQLITE_OK; if( i==0 ){ sqlite3_result_int64(ctx, nodeGetRowid(pRtree, pNode, p->iCell)); - }else{ + }else if( i<=pRtree->nDim2 ){ nodeGetCoord(pRtree, pNode, p->iCell, i-1, &c); #ifndef SQLITE_RTREE_INT_ONLY if( pRtree->eCoordType==RTREE_COORD_REAL32 ){ @@ -166859,7 +180759,27 @@ assert( pRtree->eCoordType==RTREE_COORD_INT32 ); sqlite3_result_int(ctx, c.i); } - } + }else{ + if( !pCsr->bAuxValid ){ + if( pCsr->pReadAux==0 ){ + rc = sqlite3_prepare_v3(pRtree->db, pRtree->zReadAuxSql, -1, 0, + &pCsr->pReadAux, 0); + if( rc ) return rc; + } + sqlite3_bind_int64(pCsr->pReadAux, 1, + nodeGetRowid(pRtree, pNode, p->iCell)); + rc = sqlite3_step(pCsr->pReadAux); + if( rc==SQLITE_ROW ){ + pCsr->bAuxValid = 1; + }else{ + sqlite3_reset(pCsr->pReadAux); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; + return rc; + } + } + sqlite3_result_value(ctx, + sqlite3_column_value(pCsr->pReadAux, i - pRtree->nDim2 + 1)); + } return SQLITE_OK; } @@ -166937,6 +180857,7 @@ int ii; int rc = SQLITE_OK; int iCell = 0; + sqlite3_stmt *pStmt; rtreeReference(pRtree); @@ -166943,8 +180864,10 @@ /* Reset the cursor to the same state as rtreeOpen() leaves it in. */ freeCursorConstraints(pCsr); sqlite3_free(pCsr->aPoint); + pStmt = pCsr->pReadAux; memset(pCsr, 0, sizeof(RtreeCursor)); pCsr->base.pVtab = (sqlite3_vtab*)pRtree; + pCsr->pReadAux = pStmt; pCsr->iStrategy = idxNum; if( idxNum==1 ){ @@ -167107,10 +181030,14 @@ */ pIdxInfo->estimatedCost = 30.0; pIdxInfo->estimatedRows = 1; + pIdxInfo->idxFlags = SQLITE_INDEX_SCAN_UNIQUE; return SQLITE_OK; } - if( p->usable && (p->iColumn>0 || p->op==SQLITE_INDEX_CONSTRAINT_MATCH) ){ + if( p->usable + && ((p->iColumn>0 && p->iColumn<=pRtree->nDim2) + || p->op==SQLITE_INDEX_CONSTRAINT_MATCH) + ){ u8 op; switch( p->op ){ case SQLITE_INDEX_CONSTRAINT_EQ: op = RTREE_EQ; break; @@ -167277,7 +181204,7 @@ ){ int rc; int ii; - RtreeNode *pNode; + RtreeNode *pNode = 0; rc = nodeAcquire(pRtree, 1, 0, &pNode); for(ii=0; rc==SQLITE_OK && ii<(pRtree->iDepth-iHeight); ii++){ @@ -167683,7 +181610,7 @@ }else{ pLeft = pNode; pRight = nodeNew(pRtree, pLeft->pParent); - nodeReference(pLeft); + pLeft->nRef++; } if( !pLeft || !pRight ){ @@ -168092,7 +182019,7 @@ /* ** Select a currently unused rowid for a new r-tree record. */ -static int newRowid(Rtree *pRtree, i64 *piRowid){ +static int rtreeNewRowid(Rtree *pRtree, i64 *piRowid){ int rc; sqlite3_bind_null(pRtree->pWriteRowid, 1); sqlite3_bind_null(pRtree->pWriteRowid, 2); @@ -168109,7 +182036,7 @@ int rc; /* Return code */ RtreeNode *pLeaf = 0; /* Leaf node containing record iDelete */ int iCell; /* Index of iDelete cell in pLeaf */ - RtreeNode *pRoot; /* Root node of rtree structure */ + RtreeNode *pRoot = 0; /* Root node of rtree structure */ /* Obtain a reference to the root node to initialize Rtree.iDepth */ @@ -168152,7 +182079,7 @@ */ if( rc==SQLITE_OK && pRtree->iDepth>0 && NCELL(pRoot)==1 ){ int rc2; - RtreeNode *pChild; + RtreeNode *pChild = 0; i64 iChild = nodeGetRowid(pRtree, pRoot, 0); rc = nodeAcquire(pRtree, iChild, pRoot, &pChild); if( rc==SQLITE_OK ){ @@ -168173,6 +182100,7 @@ rc = reinsertNodeContent(pRtree, pLeaf); } pRtree->pDeleted = pLeaf->pNext; + pRtree->nNodeRef--; sqlite3_free(pLeaf); } @@ -168269,7 +182197,7 @@ static int rtreeUpdate( sqlite3_vtab *pVtab, int nData, - sqlite3_value **azData, + sqlite3_value **aData, sqlite_int64 *pRowid ){ Rtree *pRtree = (Rtree *)pVtab; @@ -168277,6 +182205,12 @@ RtreeCell cell; /* New cell to insert if nData>1 */ int bHaveRowid = 0; /* Set to 1 after new rowid is determined */ + if( pRtree->nNodeRef ){ + /* Unable to write to the btree while another cursor is reading from it, + ** since the write might do a rebalance which would disrupt the read + ** cursor. */ + return SQLITE_LOCKED_VTAB; + } rtreeReference(pRtree); assert(nData>=1); @@ -168295,8 +182229,10 @@ */ if( nData>1 ){ int ii; + int nn = nData - 4; - /* Populate the cell.aCoord[] array. The first coordinate is azData[3]. + if( nn > pRtree->nDim2 ) nn = pRtree->nDim2; + /* Populate the cell.aCoord[] array. The first coordinate is aData[3]. ** ** NB: nData can only be less than nDim*2+3 if the rtree is mis-declared ** with "column" that are interpreted as table constraints. @@ -168304,13 +182240,12 @@ ** This problem was discovered after years of use, so we silently ignore ** these kinds of misdeclared tables to avoid breaking any legacy. */ - assert( nData<=(pRtree->nDim2 + 3) ); #ifndef SQLITE_RTREE_INT_ONLY if( pRtree->eCoordType==RTREE_COORD_REAL32 ){ - for(ii=0; iicell.aCoord[ii+1].f ){ rc = rtreeConstraintError(pRtree, ii+1); goto constraint; @@ -168319,9 +182254,9 @@ }else #endif { - for(ii=0; iicell.aCoord[ii+1].i ){ rc = rtreeConstraintError(pRtree, ii+1); goto constraint; @@ -168331,10 +182266,10 @@ /* If a rowid value was supplied, check if it is already present in ** the table. If so, the constraint has failed. */ - if( sqlite3_value_type(azData[2])!=SQLITE_NULL ){ - cell.iRowid = sqlite3_value_int64(azData[2]); - if( sqlite3_value_type(azData[0])==SQLITE_NULL - || sqlite3_value_int64(azData[0])!=cell.iRowid + if( sqlite3_value_type(aData[2])!=SQLITE_NULL ){ + cell.iRowid = sqlite3_value_int64(aData[2]); + if( sqlite3_value_type(aData[0])==SQLITE_NULL + || sqlite3_value_int64(aData[0])!=cell.iRowid ){ int steprc; sqlite3_bind_int64(pRtree->pReadRowid, 1, cell.iRowid); @@ -168353,16 +182288,16 @@ } } - /* If azData[0] is not an SQL NULL value, it is the rowid of a + /* If aData[0] is not an SQL NULL value, it is the rowid of a ** record to delete from the r-tree table. The following block does ** just that. */ - if( sqlite3_value_type(azData[0])!=SQLITE_NULL ){ - rc = rtreeDeleteRowid(pRtree, sqlite3_value_int64(azData[0])); + if( sqlite3_value_type(aData[0])!=SQLITE_NULL ){ + rc = rtreeDeleteRowid(pRtree, sqlite3_value_int64(aData[0])); } - /* If the azData[] array contains more than one element, elements - ** (azData[2]..azData[argc-1]) contain a new record to insert into + /* If the aData[] array contains more than one element, elements + ** (aData[2]..aData[argc-1]) contain a new record to insert into ** the r-tree structure. */ if( rc==SQLITE_OK && nData>1 ){ @@ -168371,7 +182306,7 @@ /* Figure out the rowid of the new row. */ if( bHaveRowid==0 ){ - rc = newRowid(pRtree, &cell.iRowid); + rc = rtreeNewRowid(pRtree, &cell.iRowid); } *pRowid = cell.iRowid; @@ -168387,6 +182322,16 @@ rc = rc2; } } + if( pRtree->nAux ){ + sqlite3_stmt *pUp = pRtree->pWriteAux; + int jj; + sqlite3_bind_int64(pUp, 1, *pRowid); + for(jj=0; jjnAux; jj++){ + sqlite3_bind_value(pUp, jj+2, aData[pRtree->nDim2+3+jj]); + } + sqlite3_step(pUp); + rc = sqlite3_reset(pUp); + } } constraint: @@ -168453,7 +182398,7 @@ */ static int rtreeSavepoint(sqlite3_vtab *pVtab, int iSavepoint){ Rtree *pRtree = (Rtree *)pVtab; - int iwt = pRtree->inWrTrans; + u8 iwt = pRtree->inWrTrans; UNUSED_PARAMETER(iSavepoint); pRtree->inWrTrans = 0; nodeBlobReset(pRtree); @@ -168505,8 +182450,24 @@ return rc; } + +/* +** Return true if zName is the extension on one of the shadow tables used +** by this module. +*/ +static int rtreeShadowName(const char *zName){ + static const char *azName[] = { + "node", "parent", "rowid" + }; + unsigned int i; + for(i=0; idb = db; if( isCreate ){ - char *zCreate = sqlite3_mprintf( -"CREATE TABLE \"%w\".\"%w_node\"(nodeno INTEGER PRIMARY KEY, data BLOB);" -"CREATE TABLE \"%w\".\"%w_rowid\"(rowid INTEGER PRIMARY KEY, nodeno INTEGER);" -"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY," - " parentnode INTEGER);" -"INSERT INTO '%q'.'%q_node' VALUES(1, zeroblob(%d))", - zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, pRtree->iNodeSize - ); + char *zCreate; + sqlite3_str *p = sqlite3_str_new(db); + int ii; + sqlite3_str_appendf(p, + "CREATE TABLE \"%w\".\"%w_rowid\"(rowid INTEGER PRIMARY KEY,nodeno", + zDb, zPrefix); + for(ii=0; iinAux; ii++){ + sqlite3_str_appendf(p,",a%d",ii); + } + sqlite3_str_appendf(p, + ");CREATE TABLE \"%w\".\"%w_node\"(nodeno INTEGER PRIMARY KEY,data);", + zDb, zPrefix); + sqlite3_str_appendf(p, + "CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY,parentnode);", + zDb, zPrefix); + sqlite3_str_appendf(p, + "INSERT INTO \"%w\".\"%w_node\"VALUES(1,zeroblob(%d))", + zDb, zPrefix, pRtree->iNodeSize); + zCreate = sqlite3_str_finish(p); if( !zCreate ){ return SQLITE_NOMEM; } @@ -168591,7 +182564,17 @@ rc = rtreeQueryStat1(db, pRtree); for(i=0; inAux==0 ){ + zFormat = azSql[i]; + }else { + /* An UPSERT is very slightly slower than REPLACE, but it is needed + ** if there are auxiliary columns */ + zFormat = "INSERT INTO\"%w\".\"%w_rowid\"(rowid,nodeno)VALUES(?1,?2)" + "ON CONFLICT(rowid)DO UPDATE SET nodeno=excluded.nodeno"; + } + zSql = sqlite3_mprintf(zFormat, zDb, zPrefix); if( zSql ){ rc = sqlite3_prepare_v3(db, zSql, -1, SQLITE_PREPARE_PERSISTENT, appStmt[i], 0); @@ -168600,6 +182583,36 @@ } sqlite3_free(zSql); } + if( pRtree->nAux ){ + pRtree->zReadAuxSql = sqlite3_mprintf( + "SELECT * FROM \"%w\".\"%w_rowid\" WHERE rowid=?1", + zDb, zPrefix); + if( pRtree->zReadAuxSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + sqlite3_str *p = sqlite3_str_new(db); + int ii; + char *zSql; + sqlite3_str_appendf(p, "UPDATE \"%w\".\"%w_rowid\"SET ", zDb, zPrefix); + for(ii=0; iinAux; ii++){ + if( ii ) sqlite3_str_append(p, ",", 1); + if( iinAuxNotNull ){ + sqlite3_str_appendf(p,"a%d=coalesce(?%d,a%d)",ii,ii+2,ii); + }else{ + sqlite3_str_appendf(p,"a%d=?%d",ii,ii+2); + } + } + sqlite3_str_appendf(p, " WHERE rowid=?1"); + zSql = sqlite3_str_finish(p); + if( zSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_prepare_v3(db, zSql, -1, SQLITE_PREPARE_PERSISTENT, + &pRtree->pWriteAux, 0); + sqlite3_free(zSql); + } + } + } return rc; } @@ -168670,7 +182683,7 @@ if( rc!=SQLITE_OK ){ *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); }else if( pRtree->iNodeSize<(512-64) ){ - rc = SQLITE_CORRUPT; + rc = SQLITE_CORRUPT_VTAB; *pzErr = sqlite3_mprintf("undersize RTree blobs in \"%q_node\"", pRtree->zName); } @@ -168702,17 +182715,22 @@ int nDb; /* Length of string argv[1] */ int nName; /* Length of string argv[2] */ int eCoordType = (pAux ? RTREE_COORD_INT32 : RTREE_COORD_REAL32); + sqlite3_str *pSql; + char *zSql; + int ii = 4; + int iErr; const char *aErrMsg[] = { 0, /* 0 */ "Wrong number of columns for an rtree table", /* 1 */ "Too few columns for an rtree table", /* 2 */ - "Too many columns for an rtree table" /* 3 */ + "Too many columns for an rtree table", /* 3 */ + "Auxiliary rtree columns must be last" /* 4 */ }; - int iErr = (argc<6) ? 2 : argc>(RTREE_MAX_DIMENSIONS*2+4) ? 3 : argc%2; - if( aErrMsg[iErr] ){ - *pzErr = sqlite3_mprintf("%s", aErrMsg[iErr]); + assert( RTREE_MAX_AUX_COLUMN<256 ); /* Aux columns counted by a u8 */ + if( argc>RTREE_MAX_AUX_COLUMN+3 ){ + *pzErr = sqlite3_mprintf("%s", aErrMsg[3]); return SQLITE_ERROR; } @@ -168730,53 +182748,73 @@ pRtree->base.pModule = &rtreeModule; pRtree->zDb = (char *)&pRtree[1]; pRtree->zName = &pRtree->zDb[nDb+1]; - pRtree->nDim = (u8)((argc-4)/2); - pRtree->nDim2 = pRtree->nDim*2; - pRtree->nBytesPerCell = 8 + pRtree->nDim2*4; pRtree->eCoordType = (u8)eCoordType; memcpy(pRtree->zDb, argv[1], nDb); memcpy(pRtree->zName, argv[2], nName); - /* Figure out the node size to use. */ - rc = getNodeSize(db, pRtree, isCreate, pzErr); /* Create/Connect to the underlying relational database schema. If ** that is successful, call sqlite3_declare_vtab() to configure ** the r-tree table schema. */ - if( rc==SQLITE_OK ){ - if( (rc = rtreeSqlInit(pRtree, db, argv[1], argv[2], isCreate)) ){ - *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + pSql = sqlite3_str_new(db); + sqlite3_str_appendf(pSql, "CREATE TABLE x(%s", argv[3]); + for(ii=4; iinAux++; + sqlite3_str_appendf(pSql, ",%s", argv[ii]+1); + }else if( pRtree->nAux>0 ){ + break; }else{ - char *zSql = sqlite3_mprintf("CREATE TABLE x(%s", argv[3]); - char *zTmp; - int ii; - for(ii=4; zSql && iinDim2++; + sqlite3_str_appendf(pSql, ",%s", argv[ii]); } } - - if( rc==SQLITE_OK ){ - *ppVtab = (sqlite3_vtab *)pRtree; + sqlite3_str_appendf(pSql, ");"); + zSql = sqlite3_str_finish(pSql); + if( !zSql ){ + rc = SQLITE_NOMEM; + }else if( iinDim = pRtree->nDim2/2; + if( pRtree->nDim<1 ){ + iErr = 2; + }else if( pRtree->nDim2>RTREE_MAX_DIMENSIONS*2 ){ + iErr = 3; + }else if( pRtree->nDim2 % 2 ){ + iErr = 1; }else{ - assert( *ppVtab==0 ); - assert( pRtree->nBusy==1 ); - rtreeRelease(pRtree); + iErr = 0; } + if( iErr ){ + *pzErr = sqlite3_mprintf("%s", aErrMsg[iErr]); + goto rtreeInit_fail; + } + pRtree->nBytesPerCell = 8 + pRtree->nDim2*4; + + /* Figure out the node size to use. */ + rc = getNodeSize(db, pRtree, isCreate, pzErr); + if( rc ) goto rtreeInit_fail; + rc = rtreeSqlInit(pRtree, db, argv[1], argv[2], isCreate); + if( rc ){ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + goto rtreeInit_fail; + } + + *ppVtab = (sqlite3_vtab *)pRtree; + return SQLITE_OK; + +rtreeInit_fail: + if( rc==SQLITE_OK ) rc = SQLITE_ERROR; + assert( *ppVtab==0 ); + assert( pRtree->nBusy==1 ); + rtreeRelease(pRtree); return rc; } @@ -168865,6 +182903,2279 @@ } /* +** Context object passed between the various routines that make up the +** implementation of integrity-check function rtreecheck(). +*/ +typedef struct RtreeCheck RtreeCheck; +struct RtreeCheck { + sqlite3 *db; /* Database handle */ + const char *zDb; /* Database containing rtree table */ + const char *zTab; /* Name of rtree table */ + int bInt; /* True for rtree_i32 table */ + int nDim; /* Number of dimensions for this rtree tbl */ + sqlite3_stmt *pGetNode; /* Statement used to retrieve nodes */ + sqlite3_stmt *aCheckMapping[2]; /* Statements to query %_parent/%_rowid */ + int nLeaf; /* Number of leaf cells in table */ + int nNonLeaf; /* Number of non-leaf cells in table */ + int rc; /* Return code */ + char *zReport; /* Message to report */ + int nErr; /* Number of lines in zReport */ +}; + +#define RTREE_CHECK_MAX_ERROR 100 + +/* +** Reset SQL statement pStmt. If the sqlite3_reset() call returns an error, +** and RtreeCheck.rc==SQLITE_OK, set RtreeCheck.rc to the error code. +*/ +static void rtreeCheckReset(RtreeCheck *pCheck, sqlite3_stmt *pStmt){ + int rc = sqlite3_reset(pStmt); + if( pCheck->rc==SQLITE_OK ) pCheck->rc = rc; +} + +/* +** The second and subsequent arguments to this function are a format string +** and printf style arguments. This function formats the string and attempts +** to compile it as an SQL statement. +** +** If successful, a pointer to the new SQL statement is returned. Otherwise, +** NULL is returned and an error code left in RtreeCheck.rc. +*/ +static sqlite3_stmt *rtreeCheckPrepare( + RtreeCheck *pCheck, /* RtreeCheck object */ + const char *zFmt, ... /* Format string and trailing args */ +){ + va_list ap; + char *z; + sqlite3_stmt *pRet = 0; + + va_start(ap, zFmt); + z = sqlite3_vmprintf(zFmt, ap); + + if( pCheck->rc==SQLITE_OK ){ + if( z==0 ){ + pCheck->rc = SQLITE_NOMEM; + }else{ + pCheck->rc = sqlite3_prepare_v2(pCheck->db, z, -1, &pRet, 0); + } + } + + sqlite3_free(z); + va_end(ap); + return pRet; +} + +/* +** The second and subsequent arguments to this function are a printf() +** style format string and arguments. This function formats the string and +** appends it to the report being accumuated in pCheck. +*/ +static void rtreeCheckAppendMsg(RtreeCheck *pCheck, const char *zFmt, ...){ + va_list ap; + va_start(ap, zFmt); + if( pCheck->rc==SQLITE_OK && pCheck->nErrrc = SQLITE_NOMEM; + }else{ + pCheck->zReport = sqlite3_mprintf("%z%s%z", + pCheck->zReport, (pCheck->zReport ? "\n" : ""), z + ); + if( pCheck->zReport==0 ){ + pCheck->rc = SQLITE_NOMEM; + } + } + pCheck->nErr++; + } + va_end(ap); +} + +/* +** This function is a no-op if there is already an error code stored +** in the RtreeCheck object indicated by the first argument. NULL is +** returned in this case. +** +** Otherwise, the contents of rtree table node iNode are loaded from +** the database and copied into a buffer obtained from sqlite3_malloc(). +** If no error occurs, a pointer to the buffer is returned and (*pnNode) +** is set to the size of the buffer in bytes. +** +** Or, if an error does occur, NULL is returned and an error code left +** in the RtreeCheck object. The final value of *pnNode is undefined in +** this case. +*/ +static u8 *rtreeCheckGetNode(RtreeCheck *pCheck, i64 iNode, int *pnNode){ + u8 *pRet = 0; /* Return value */ + + assert( pCheck->rc==SQLITE_OK ); + if( pCheck->pGetNode==0 ){ + pCheck->pGetNode = rtreeCheckPrepare(pCheck, + "SELECT data FROM %Q.'%q_node' WHERE nodeno=?", + pCheck->zDb, pCheck->zTab + ); + } + + if( pCheck->rc==SQLITE_OK ){ + sqlite3_bind_int64(pCheck->pGetNode, 1, iNode); + if( sqlite3_step(pCheck->pGetNode)==SQLITE_ROW ){ + int nNode = sqlite3_column_bytes(pCheck->pGetNode, 0); + const u8 *pNode = (const u8*)sqlite3_column_blob(pCheck->pGetNode, 0); + pRet = sqlite3_malloc(nNode); + if( pRet==0 ){ + pCheck->rc = SQLITE_NOMEM; + }else{ + memcpy(pRet, pNode, nNode); + *pnNode = nNode; + } + } + rtreeCheckReset(pCheck, pCheck->pGetNode); + if( pCheck->rc==SQLITE_OK && pRet==0 ){ + rtreeCheckAppendMsg(pCheck, "Node %lld missing from database", iNode); + } + } + + return pRet; +} + +/* +** This function is used to check that the %_parent (if bLeaf==0) or %_rowid +** (if bLeaf==1) table contains a specified entry. The schemas of the +** two tables are: +** +** CREATE TABLE %_parent(nodeno INTEGER PRIMARY KEY, parentnode INTEGER) +** CREATE TABLE %_rowid(rowid INTEGER PRIMARY KEY, nodeno INTEGER, ...) +** +** In both cases, this function checks that there exists an entry with +** IPK value iKey and the second column set to iVal. +** +*/ +static void rtreeCheckMapping( + RtreeCheck *pCheck, /* RtreeCheck object */ + int bLeaf, /* True for a leaf cell, false for interior */ + i64 iKey, /* Key for mapping */ + i64 iVal /* Expected value for mapping */ +){ + int rc; + sqlite3_stmt *pStmt; + const char *azSql[2] = { + "SELECT parentnode FROM %Q.'%q_parent' WHERE nodeno=?1", + "SELECT nodeno FROM %Q.'%q_rowid' WHERE rowid=?1" + }; + + assert( bLeaf==0 || bLeaf==1 ); + if( pCheck->aCheckMapping[bLeaf]==0 ){ + pCheck->aCheckMapping[bLeaf] = rtreeCheckPrepare(pCheck, + azSql[bLeaf], pCheck->zDb, pCheck->zTab + ); + } + if( pCheck->rc!=SQLITE_OK ) return; + + pStmt = pCheck->aCheckMapping[bLeaf]; + sqlite3_bind_int64(pStmt, 1, iKey); + rc = sqlite3_step(pStmt); + if( rc==SQLITE_DONE ){ + rtreeCheckAppendMsg(pCheck, "Mapping (%lld -> %lld) missing from %s table", + iKey, iVal, (bLeaf ? "%_rowid" : "%_parent") + ); + }else if( rc==SQLITE_ROW ){ + i64 ii = sqlite3_column_int64(pStmt, 0); + if( ii!=iVal ){ + rtreeCheckAppendMsg(pCheck, + "Found (%lld -> %lld) in %s table, expected (%lld -> %lld)", + iKey, ii, (bLeaf ? "%_rowid" : "%_parent"), iKey, iVal + ); + } + } + rtreeCheckReset(pCheck, pStmt); +} + +/* +** Argument pCell points to an array of coordinates stored on an rtree page. +** This function checks that the coordinates are internally consistent (no +** x1>x2 conditions) and adds an error message to the RtreeCheck object +** if they are not. +** +** Additionally, if pParent is not NULL, then it is assumed to point to +** the array of coordinates on the parent page that bound the page +** containing pCell. In this case it is also verified that the two +** sets of coordinates are mutually consistent and an error message added +** to the RtreeCheck object if they are not. +*/ +static void rtreeCheckCellCoord( + RtreeCheck *pCheck, + i64 iNode, /* Node id to use in error messages */ + int iCell, /* Cell number to use in error messages */ + u8 *pCell, /* Pointer to cell coordinates */ + u8 *pParent /* Pointer to parent coordinates */ +){ + RtreeCoord c1, c2; + RtreeCoord p1, p2; + int i; + + for(i=0; inDim; i++){ + readCoord(&pCell[4*2*i], &c1); + readCoord(&pCell[4*(2*i + 1)], &c2); + + /* printf("%e, %e\n", c1.u.f, c2.u.f); */ + if( pCheck->bInt ? c1.i>c2.i : c1.f>c2.f ){ + rtreeCheckAppendMsg(pCheck, + "Dimension %d of cell %d on node %lld is corrupt", i, iCell, iNode + ); + } + + if( pParent ){ + readCoord(&pParent[4*2*i], &p1); + readCoord(&pParent[4*(2*i + 1)], &p2); + + if( (pCheck->bInt ? c1.ibInt ? c2.i>p2.i : c2.f>p2.f) + ){ + rtreeCheckAppendMsg(pCheck, + "Dimension %d of cell %d on node %lld is corrupt relative to parent" + , i, iCell, iNode + ); + } + } + } +} + +/* +** Run rtreecheck() checks on node iNode, which is at depth iDepth within +** the r-tree structure. Argument aParent points to the array of coordinates +** that bound node iNode on the parent node. +** +** If any problems are discovered, an error message is appended to the +** report accumulated in the RtreeCheck object. +*/ +static void rtreeCheckNode( + RtreeCheck *pCheck, + int iDepth, /* Depth of iNode (0==leaf) */ + u8 *aParent, /* Buffer containing parent coords */ + i64 iNode /* Node to check */ +){ + u8 *aNode = 0; + int nNode = 0; + + assert( iNode==1 || aParent!=0 ); + assert( pCheck->nDim>0 ); + + aNode = rtreeCheckGetNode(pCheck, iNode, &nNode); + if( aNode ){ + if( nNode<4 ){ + rtreeCheckAppendMsg(pCheck, + "Node %lld is too small (%d bytes)", iNode, nNode + ); + }else{ + int nCell; /* Number of cells on page */ + int i; /* Used to iterate through cells */ + if( aParent==0 ){ + iDepth = readInt16(aNode); + if( iDepth>RTREE_MAX_DEPTH ){ + rtreeCheckAppendMsg(pCheck, "Rtree depth out of range (%d)", iDepth); + sqlite3_free(aNode); + return; + } + } + nCell = readInt16(&aNode[2]); + if( (4 + nCell*(8 + pCheck->nDim*2*4))>nNode ){ + rtreeCheckAppendMsg(pCheck, + "Node %lld is too small for cell count of %d (%d bytes)", + iNode, nCell, nNode + ); + }else{ + for(i=0; inDim*2*4)]; + i64 iVal = readInt64(pCell); + rtreeCheckCellCoord(pCheck, iNode, i, &pCell[8], aParent); + + if( iDepth>0 ){ + rtreeCheckMapping(pCheck, 0, iVal, iNode); + rtreeCheckNode(pCheck, iDepth-1, &pCell[8], iVal); + pCheck->nNonLeaf++; + }else{ + rtreeCheckMapping(pCheck, 1, iVal, iNode); + pCheck->nLeaf++; + } + } + } + } + sqlite3_free(aNode); + } +} + +/* +** The second argument to this function must be either "_rowid" or +** "_parent". This function checks that the number of entries in the +** %_rowid or %_parent table is exactly nExpect. If not, it adds +** an error message to the report in the RtreeCheck object indicated +** by the first argument. +*/ +static void rtreeCheckCount(RtreeCheck *pCheck, const char *zTbl, i64 nExpect){ + if( pCheck->rc==SQLITE_OK ){ + sqlite3_stmt *pCount; + pCount = rtreeCheckPrepare(pCheck, "SELECT count(*) FROM %Q.'%q%s'", + pCheck->zDb, pCheck->zTab, zTbl + ); + if( pCount ){ + if( sqlite3_step(pCount)==SQLITE_ROW ){ + i64 nActual = sqlite3_column_int64(pCount, 0); + if( nActual!=nExpect ){ + rtreeCheckAppendMsg(pCheck, "Wrong number of entries in %%%s table" + " - expected %lld, actual %lld" , zTbl, nExpect, nActual + ); + } + } + pCheck->rc = sqlite3_finalize(pCount); + } + } +} + +/* +** This function does the bulk of the work for the rtree integrity-check. +** It is called by rtreecheck(), which is the SQL function implementation. +*/ +static int rtreeCheckTable( + sqlite3 *db, /* Database handle to access db through */ + const char *zDb, /* Name of db ("main", "temp" etc.) */ + const char *zTab, /* Name of rtree table to check */ + char **pzReport /* OUT: sqlite3_malloc'd report text */ +){ + RtreeCheck check; /* Common context for various routines */ + sqlite3_stmt *pStmt = 0; /* Used to find column count of rtree table */ + int bEnd = 0; /* True if transaction should be closed */ + int nAux = 0; /* Number of extra columns. */ + + /* Initialize the context object */ + memset(&check, 0, sizeof(check)); + check.db = db; + check.zDb = zDb; + check.zTab = zTab; + + /* If there is not already an open transaction, open one now. This is + ** to ensure that the queries run as part of this integrity-check operate + ** on a consistent snapshot. */ + if( sqlite3_get_autocommit(db) ){ + check.rc = sqlite3_exec(db, "BEGIN", 0, 0, 0); + bEnd = 1; + } + + /* Find the number of auxiliary columns */ + if( check.rc==SQLITE_OK ){ + pStmt = rtreeCheckPrepare(&check, "SELECT * FROM %Q.'%q_rowid'", zDb, zTab); + if( pStmt ){ + nAux = sqlite3_column_count(pStmt) - 2; + sqlite3_finalize(pStmt); + } + check.rc = SQLITE_OK; + } + + /* Find number of dimensions in the rtree table. */ + pStmt = rtreeCheckPrepare(&check, "SELECT * FROM %Q.%Q", zDb, zTab); + if( pStmt ){ + int rc; + check.nDim = (sqlite3_column_count(pStmt) - 1 - nAux) / 2; + if( check.nDim<1 ){ + rtreeCheckAppendMsg(&check, "Schema corrupt or not an rtree"); + }else if( SQLITE_ROW==sqlite3_step(pStmt) ){ + check.bInt = (sqlite3_column_type(pStmt, 1)==SQLITE_INTEGER); + } + rc = sqlite3_finalize(pStmt); + if( rc!=SQLITE_CORRUPT ) check.rc = rc; + } + + /* Do the actual integrity-check */ + if( check.nDim>=1 ){ + if( check.rc==SQLITE_OK ){ + rtreeCheckNode(&check, 0, 0, 1); + } + rtreeCheckCount(&check, "_rowid", check.nLeaf); + rtreeCheckCount(&check, "_parent", check.nNonLeaf); + } + + /* Finalize SQL statements used by the integrity-check */ + sqlite3_finalize(check.pGetNode); + sqlite3_finalize(check.aCheckMapping[0]); + sqlite3_finalize(check.aCheckMapping[1]); + + /* If one was opened, close the transaction */ + if( bEnd ){ + int rc = sqlite3_exec(db, "END", 0, 0, 0); + if( check.rc==SQLITE_OK ) check.rc = rc; + } + *pzReport = check.zReport; + return check.rc; +} + +/* +** Usage: +** +** rtreecheck(); +** rtreecheck(, ); +** +** Invoking this SQL function runs an integrity-check on the named rtree +** table. The integrity-check verifies the following: +** +** 1. For each cell in the r-tree structure (%_node table), that: +** +** a) for each dimension, (coord1 <= coord2). +** +** b) unless the cell is on the root node, that the cell is bounded +** by the parent cell on the parent node. +** +** c) for leaf nodes, that there is an entry in the %_rowid +** table corresponding to the cell's rowid value that +** points to the correct node. +** +** d) for cells on non-leaf nodes, that there is an entry in the +** %_parent table mapping from the cell's child node to the +** node that it resides on. +** +** 2. That there are the same number of entries in the %_rowid table +** as there are leaf cells in the r-tree structure, and that there +** is a leaf cell that corresponds to each entry in the %_rowid table. +** +** 3. That there are the same number of entries in the %_parent table +** as there are non-leaf cells in the r-tree structure, and that +** there is a non-leaf cell that corresponds to each entry in the +** %_parent table. +*/ +static void rtreecheck( + sqlite3_context *ctx, + int nArg, + sqlite3_value **apArg +){ + if( nArg!=1 && nArg!=2 ){ + sqlite3_result_error(ctx, + "wrong number of arguments to function rtreecheck()", -1 + ); + }else{ + int rc; + char *zReport = 0; + const char *zDb = (const char*)sqlite3_value_text(apArg[0]); + const char *zTab; + if( nArg==1 ){ + zTab = zDb; + zDb = "main"; + }else{ + zTab = (const char*)sqlite3_value_text(apArg[1]); + } + rc = rtreeCheckTable(sqlite3_context_db_handle(ctx), zDb, zTab, &zReport); + if( rc==SQLITE_OK ){ + sqlite3_result_text(ctx, zReport ? zReport : "ok", -1, SQLITE_TRANSIENT); + }else{ + sqlite3_result_error_code(ctx, rc); + } + sqlite3_free(zReport); + } +} + +/* Conditionally include the geopoly code */ +#ifdef SQLITE_ENABLE_GEOPOLY +/************** Include geopoly.c in the middle of rtree.c *******************/ +/************** Begin file geopoly.c *****************************************/ +/* +** 2018-05-25 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file implements an alternative R-Tree virtual table that +** uses polygons to express the boundaries of 2-dimensional objects. +** +** This file is #include-ed onto the end of "rtree.c" so that it has +** access to all of the R-Tree internals. +*/ +/* #include */ + +/* Enable -DGEOPOLY_ENABLE_DEBUG for debugging facilities */ +#ifdef GEOPOLY_ENABLE_DEBUG + static int geo_debug = 0; +# define GEODEBUG(X) if(geo_debug)printf X +#else +# define GEODEBUG(X) +#endif + +#ifndef JSON_NULL /* The following stuff repeats things found in json1 */ +/* +** Versions of isspace(), isalnum() and isdigit() to which it is safe +** to pass signed char values. +*/ +#ifdef sqlite3Isdigit + /* Use the SQLite core versions if this routine is part of the + ** SQLite amalgamation */ +# define safe_isdigit(x) sqlite3Isdigit(x) +# define safe_isalnum(x) sqlite3Isalnum(x) +# define safe_isxdigit(x) sqlite3Isxdigit(x) +#else + /* Use the standard library for separate compilation */ +#include /* amalgamator: keep */ +# define safe_isdigit(x) isdigit((unsigned char)(x)) +# define safe_isalnum(x) isalnum((unsigned char)(x)) +# define safe_isxdigit(x) isxdigit((unsigned char)(x)) +#endif + +/* +** Growing our own isspace() routine this way is twice as fast as +** the library isspace() function. +*/ +static const char geopolyIsSpace[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +}; +#define safe_isspace(x) (geopolyIsSpace[(unsigned char)x]) +#endif /* JSON NULL - back to original code */ + +/* Compiler and version */ +#ifndef GCC_VERSION +#if defined(__GNUC__) && !defined(SQLITE_DISABLE_INTRINSIC) +# define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__) +#else +# define GCC_VERSION 0 +#endif +#endif +#ifndef MSVC_VERSION +#if defined(_MSC_VER) && !defined(SQLITE_DISABLE_INTRINSIC) +# define MSVC_VERSION _MSC_VER +#else +# define MSVC_VERSION 0 +#endif +#endif + +/* Datatype for coordinates +*/ +typedef float GeoCoord; + +/* +** Internal representation of a polygon. +** +** The polygon consists of a sequence of vertexes. There is a line +** segment between each pair of vertexes, and one final segment from +** the last vertex back to the first. (This differs from the GeoJSON +** standard in which the final vertex is a repeat of the first.) +** +** The polygon follows the right-hand rule. The area to the right of +** each segment is "outside" and the area to the left is "inside". +** +** The on-disk representation consists of a 4-byte header followed by +** the values. The 4-byte header is: +** +** encoding (1 byte) 0=big-endian, 1=little-endian +** nvertex (3 bytes) Number of vertexes as a big-endian integer +** +** Enough space is allocated for 4 coordinates, to work around over-zealous +** warnings coming from some compiler (notably, clang). In reality, the size +** of each GeoPoly memory allocate is adjusted as necessary so that the +** GeoPoly.a[] array at the end is the appropriate size. +*/ +typedef struct GeoPoly GeoPoly; +struct GeoPoly { + int nVertex; /* Number of vertexes */ + unsigned char hdr[4]; /* Header for on-disk representation */ + GeoCoord a[8]; /* 2*nVertex values. X (longitude) first, then Y */ +}; + +/* The size of a memory allocation needed for a GeoPoly object sufficient +** to hold N coordinate pairs. +*/ +#define GEOPOLY_SZ(N) (sizeof(GeoPoly) + sizeof(GeoCoord)*2*((N)-4)) + +/* +** State of a parse of a GeoJSON input. +*/ +typedef struct GeoParse GeoParse; +struct GeoParse { + const unsigned char *z; /* Unparsed input */ + int nVertex; /* Number of vertexes in a[] */ + int nAlloc; /* Space allocated to a[] */ + int nErr; /* Number of errors encountered */ + GeoCoord *a; /* Array of vertexes. From sqlite3_malloc64() */ +}; + +/* Do a 4-byte byte swap */ +static void geopolySwab32(unsigned char *a){ + unsigned char t = a[0]; + a[0] = a[3]; + a[3] = t; + t = a[1]; + a[1] = a[2]; + a[2] = t; +} + +/* Skip whitespace. Return the next non-whitespace character. */ +static char geopolySkipSpace(GeoParse *p){ + while( safe_isspace(p->z[0]) ) p->z++; + return p->z[0]; +} + +/* Parse out a number. Write the value into *pVal if pVal!=0. +** return non-zero on success and zero if the next token is not a number. +*/ +static int geopolyParseNumber(GeoParse *p, GeoCoord *pVal){ + char c = geopolySkipSpace(p); + const unsigned char *z = p->z; + int j = 0; + int seenDP = 0; + int seenE = 0; + if( c=='-' ){ + j = 1; + c = z[j]; + } + if( c=='0' && z[j+1]>='0' && z[j+1]<='9' ) return 0; + for(;; j++){ + c = z[j]; + if( safe_isdigit(c) ) continue; + if( c=='.' ){ + if( z[j-1]=='-' ) return 0; + if( seenDP ) return 0; + seenDP = 1; + continue; + } + if( c=='e' || c=='E' ){ + if( z[j-1]<'0' ) return 0; + if( seenE ) return -1; + seenDP = seenE = 1; + c = z[j+1]; + if( c=='+' || c=='-' ){ + j++; + c = z[j+1]; + } + if( c<'0' || c>'9' ) return 0; + continue; + } + break; + } + if( z[j-1]<'0' ) return 0; + if( pVal ){ +#ifdef SQLITE_AMALGAMATION + /* The sqlite3AtoF() routine is much much faster than atof(), if it + ** is available */ + double r; + (void)sqlite3AtoF((const char*)p->z, &r, j, SQLITE_UTF8); + *pVal = r; +#else + *pVal = (GeoCoord)atof((const char*)p->z); +#endif + } + p->z += j; + return 1; +} + +/* +** If the input is a well-formed JSON array of coordinates with at least +** four coordinates and where each coordinate is itself a two-value array, +** then convert the JSON into a GeoPoly object and return a pointer to +** that object. +** +** If any error occurs, return NULL. +*/ +static GeoPoly *geopolyParseJson(const unsigned char *z, int *pRc){ + GeoParse s; + int rc = SQLITE_OK; + memset(&s, 0, sizeof(s)); + s.z = z; + if( geopolySkipSpace(&s)=='[' ){ + s.z++; + while( geopolySkipSpace(&s)=='[' ){ + int ii = 0; + char c; + s.z++; + if( s.nVertex>=s.nAlloc ){ + GeoCoord *aNew; + s.nAlloc = s.nAlloc*2 + 16; + aNew = sqlite3_realloc64(s.a, s.nAlloc*sizeof(GeoCoord)*2 ); + if( aNew==0 ){ + rc = SQLITE_NOMEM; + s.nErr++; + break; + } + s.a = aNew; + } + while( geopolyParseNumber(&s, ii<=1 ? &s.a[s.nVertex*2+ii] : 0) ){ + ii++; + if( ii==2 ) s.nVertex++; + c = geopolySkipSpace(&s); + s.z++; + if( c==',' ) continue; + if( c==']' && ii>=2 ) break; + s.nErr++; + rc = SQLITE_ERROR; + goto parse_json_err; + } + if( geopolySkipSpace(&s)==',' ){ + s.z++; + continue; + } + break; + } + if( geopolySkipSpace(&s)==']' + && s.nVertex>=4 + && s.a[0]==s.a[s.nVertex*2-2] + && s.a[1]==s.a[s.nVertex*2-1] + && (s.z++, geopolySkipSpace(&s)==0) + ){ + GeoPoly *pOut; + int x = 1; + s.nVertex--; /* Remove the redundant vertex at the end */ + pOut = sqlite3_malloc64( GEOPOLY_SZ(s.nVertex) ); + x = 1; + if( pOut==0 ) goto parse_json_err; + pOut->nVertex = s.nVertex; + memcpy(pOut->a, s.a, s.nVertex*2*sizeof(GeoCoord)); + pOut->hdr[0] = *(unsigned char*)&x; + pOut->hdr[1] = (s.nVertex>>16)&0xff; + pOut->hdr[2] = (s.nVertex>>8)&0xff; + pOut->hdr[3] = s.nVertex&0xff; + sqlite3_free(s.a); + if( pRc ) *pRc = SQLITE_OK; + return pOut; + }else{ + s.nErr++; + rc = SQLITE_ERROR; + } + } +parse_json_err: + if( pRc ) *pRc = rc; + sqlite3_free(s.a); + return 0; +} + +/* +** Given a function parameter, try to interpret it as a polygon, either +** in the binary format or JSON text. Compute a GeoPoly object and +** return a pointer to that object. Or if the input is not a well-formed +** polygon, put an error message in sqlite3_context and return NULL. +*/ +static GeoPoly *geopolyFuncParam( + sqlite3_context *pCtx, /* Context for error messages */ + sqlite3_value *pVal, /* The value to decode */ + int *pRc /* Write error here */ +){ + GeoPoly *p = 0; + int nByte; + if( sqlite3_value_type(pVal)==SQLITE_BLOB + && (nByte = sqlite3_value_bytes(pVal))>=(4+6*sizeof(GeoCoord)) + ){ + const unsigned char *a = sqlite3_value_blob(pVal); + int nVertex; + nVertex = (a[1]<<16) + (a[2]<<8) + a[3]; + if( (a[0]==0 || a[0]==1) + && (nVertex*2*sizeof(GeoCoord) + 4)==(unsigned int)nByte + ){ + p = sqlite3_malloc64( sizeof(*p) + (nVertex-1)*2*sizeof(GeoCoord) ); + if( p==0 ){ + if( pRc ) *pRc = SQLITE_NOMEM; + if( pCtx ) sqlite3_result_error_nomem(pCtx); + }else{ + int x = 1; + p->nVertex = nVertex; + memcpy(p->hdr, a, nByte); + if( a[0] != *(unsigned char*)&x ){ + int ii; + for(ii=0; iia[ii]); + } + p->hdr[0] ^= 1; + } + } + } + if( pRc ) *pRc = SQLITE_OK; + return p; + }else if( sqlite3_value_type(pVal)==SQLITE_TEXT ){ + const unsigned char *zJson = sqlite3_value_text(pVal); + if( zJson==0 ){ + if( pRc ) *pRc = SQLITE_NOMEM; + return 0; + } + return geopolyParseJson(zJson, pRc); + }else{ + if( pRc ) *pRc = SQLITE_ERROR; + return 0; + } +} + +/* +** Implementation of the geopoly_blob(X) function. +** +** If the input is a well-formed Geopoly BLOB or JSON string +** then return the BLOB representation of the polygon. Otherwise +** return NULL. +*/ +static void geopolyBlobFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p = geopolyFuncParam(context, argv[0], 0); + if( p ){ + sqlite3_result_blob(context, p->hdr, + 4+8*p->nVertex, SQLITE_TRANSIENT); + sqlite3_free(p); + } +} + +/* +** SQL function: geopoly_json(X) +** +** Interpret X as a polygon and render it as a JSON array +** of coordinates. Or, if X is not a valid polygon, return NULL. +*/ +static void geopolyJsonFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p = geopolyFuncParam(context, argv[0], 0); + if( p ){ + sqlite3 *db = sqlite3_context_db_handle(context); + sqlite3_str *x = sqlite3_str_new(db); + int i; + sqlite3_str_append(x, "[", 1); + for(i=0; inVertex; i++){ + sqlite3_str_appendf(x, "[%!g,%!g],", p->a[i*2], p->a[i*2+1]); + } + sqlite3_str_appendf(x, "[%!g,%!g]]", p->a[0], p->a[1]); + sqlite3_result_text(context, sqlite3_str_finish(x), -1, sqlite3_free); + sqlite3_free(p); + } +} + +/* +** SQL function: geopoly_svg(X, ....) +** +** Interpret X as a polygon and render it as a SVG . +** Additional arguments are added as attributes to the . +*/ +static void geopolySvgFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p = geopolyFuncParam(context, argv[0], 0); + if( p ){ + sqlite3 *db = sqlite3_context_db_handle(context); + sqlite3_str *x = sqlite3_str_new(db); + int i; + char cSep = '\''; + sqlite3_str_appendf(x, "a[i*2], p->a[i*2+1]); + cSep = ' '; + } + sqlite3_str_appendf(x, " %g,%g'", p->a[0], p->a[1]); + for(i=1; i"); + sqlite3_result_text(context, sqlite3_str_finish(x), -1, sqlite3_free); + sqlite3_free(p); + } +} + +/* +** SQL Function: geopoly_xform(poly, A, B, C, D, E, F) +** +** Transform and/or translate a polygon as follows: +** +** x1 = A*x0 + B*y0 + E +** y1 = C*x0 + D*y0 + F +** +** For a translation: +** +** geopoly_xform(poly, 1, 0, 0, 1, x-offset, y-offset) +** +** Rotate by R around the point (0,0): +** +** geopoly_xform(poly, cos(R), sin(R), -sin(R), cos(R), 0, 0) +*/ +static void geopolyXformFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p = geopolyFuncParam(context, argv[0], 0); + double A = sqlite3_value_double(argv[1]); + double B = sqlite3_value_double(argv[2]); + double C = sqlite3_value_double(argv[3]); + double D = sqlite3_value_double(argv[4]); + double E = sqlite3_value_double(argv[5]); + double F = sqlite3_value_double(argv[6]); + GeoCoord x1, y1, x0, y0; + int ii; + if( p ){ + for(ii=0; iinVertex; ii++){ + x0 = p->a[ii*2]; + y0 = p->a[ii*2+1]; + x1 = (GeoCoord)(A*x0 + B*y0 + E); + y1 = (GeoCoord)(C*x0 + D*y0 + F); + p->a[ii*2] = x1; + p->a[ii*2+1] = y1; + } + sqlite3_result_blob(context, p->hdr, + 4+8*p->nVertex, SQLITE_TRANSIENT); + sqlite3_free(p); + } +} + +/* +** Compute the area enclosed by the polygon. +** +** This routine can also be used to detect polygons that rotate in +** the wrong direction. Polygons are suppose to be counter-clockwise (CCW). +** This routine returns a negative value for clockwise (CW) polygons. +*/ +static double geopolyArea(GeoPoly *p){ + double rArea = 0.0; + int ii; + for(ii=0; iinVertex-1; ii++){ + rArea += (p->a[ii*2] - p->a[ii*2+2]) /* (x0 - x1) */ + * (p->a[ii*2+1] + p->a[ii*2+3]) /* (y0 + y1) */ + * 0.5; + } + rArea += (p->a[ii*2] - p->a[0]) /* (xN - x0) */ + * (p->a[ii*2+1] + p->a[1]) /* (yN + y0) */ + * 0.5; + return rArea; +} + +/* +** Implementation of the geopoly_area(X) function. +** +** If the input is a well-formed Geopoly BLOB then return the area +** enclosed by the polygon. If the polygon circulates clockwise instead +** of counterclockwise (as it should) then return the negative of the +** enclosed area. Otherwise return NULL. +*/ +static void geopolyAreaFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p = geopolyFuncParam(context, argv[0], 0); + if( p ){ + sqlite3_result_double(context, geopolyArea(p)); + sqlite3_free(p); + } +} + +/* +** Implementation of the geopoly_ccw(X) function. +** +** If the rotation of polygon X is clockwise (incorrect) instead of +** counter-clockwise (the correct winding order according to RFC7946) +** then reverse the order of the vertexes in polygon X. +** +** In other words, this routine returns a CCW polygon regardless of the +** winding order of its input. +** +** Use this routine to sanitize historical inputs that that sometimes +** contain polygons that wind in the wrong direction. +*/ +static void geopolyCcwFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p = geopolyFuncParam(context, argv[0], 0); + if( p ){ + if( geopolyArea(p)<0.0 ){ + int ii, jj; + for(ii=2, jj=p->nVertex*2 - 2; iia[ii]; + p->a[ii] = p->a[jj]; + p->a[jj] = t; + t = p->a[ii+1]; + p->a[ii+1] = p->a[jj+1]; + p->a[jj+1] = t; + } + } + sqlite3_result_blob(context, p->hdr, + 4+8*p->nVertex, SQLITE_TRANSIENT); + sqlite3_free(p); + } +} + +#define GEOPOLY_PI 3.1415926535897932385 + +/* Fast approximation for sine(X) for X between -0.5*pi and 2*pi +*/ +static double geopolySine(double r){ + assert( r>=-0.5*GEOPOLY_PI && r<=2.0*GEOPOLY_PI ); + if( r>=1.5*GEOPOLY_PI ){ + r -= 2.0*GEOPOLY_PI; + } + if( r>=0.5*GEOPOLY_PI ){ + return -geopolySine(r-GEOPOLY_PI); + }else{ + double r2 = r*r; + double r3 = r2*r; + double r5 = r3*r2; + return 0.9996949*r - 0.1656700*r3 + 0.0075134*r5; + } +} + +/* +** Function: geopoly_regular(X,Y,R,N) +** +** Construct a simple, convex, regular polygon centered at X, Y +** with circumradius R and with N sides. +*/ +static void geopolyRegularFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + double x = sqlite3_value_double(argv[0]); + double y = sqlite3_value_double(argv[1]); + double r = sqlite3_value_double(argv[2]); + int n = sqlite3_value_int(argv[3]); + int i; + GeoPoly *p; + + if( n<3 || r<=0.0 ) return; + if( n>1000 ) n = 1000; + p = sqlite3_malloc64( sizeof(*p) + (n-1)*2*sizeof(GeoCoord) ); + if( p==0 ){ + sqlite3_result_error_nomem(context); + return; + } + i = 1; + p->hdr[0] = *(unsigned char*)&i; + p->hdr[1] = 0; + p->hdr[2] = (n>>8)&0xff; + p->hdr[3] = n&0xff; + for(i=0; ia[i*2] = x - r*geopolySine(rAngle-0.5*GEOPOLY_PI); + p->a[i*2+1] = y + r*geopolySine(rAngle); + } + sqlite3_result_blob(context, p->hdr, 4+8*n, SQLITE_TRANSIENT); + sqlite3_free(p); +} + +/* +** If pPoly is a polygon, compute its bounding box. Then: +** +** (1) if aCoord!=0 store the bounding box in aCoord, returning NULL +** (2) otherwise, compute a GeoPoly for the bounding box and return the +** new GeoPoly +** +** If pPoly is NULL but aCoord is not NULL, then compute a new GeoPoly from +** the bounding box in aCoord and return a pointer to that GeoPoly. +*/ +static GeoPoly *geopolyBBox( + sqlite3_context *context, /* For recording the error */ + sqlite3_value *pPoly, /* The polygon */ + RtreeCoord *aCoord, /* Results here */ + int *pRc /* Error code here */ +){ + GeoPoly *pOut = 0; + GeoPoly *p; + float mnX, mxX, mnY, mxY; + if( pPoly==0 && aCoord!=0 ){ + p = 0; + mnX = aCoord[0].f; + mxX = aCoord[1].f; + mnY = aCoord[2].f; + mxY = aCoord[3].f; + goto geopolyBboxFill; + }else{ + p = geopolyFuncParam(context, pPoly, pRc); + } + if( p ){ + int ii; + mnX = mxX = p->a[0]; + mnY = mxY = p->a[1]; + for(ii=1; iinVertex; ii++){ + double r = p->a[ii*2]; + if( rmxX ) mxX = (float)r; + r = p->a[ii*2+1]; + if( rmxY ) mxY = (float)r; + } + if( pRc ) *pRc = SQLITE_OK; + if( aCoord==0 ){ + geopolyBboxFill: + pOut = sqlite3_realloc(p, GEOPOLY_SZ(4)); + if( pOut==0 ){ + sqlite3_free(p); + if( context ) sqlite3_result_error_nomem(context); + if( pRc ) *pRc = SQLITE_NOMEM; + return 0; + } + pOut->nVertex = 4; + ii = 1; + pOut->hdr[0] = *(unsigned char*)ⅈ + pOut->hdr[1] = 0; + pOut->hdr[2] = 0; + pOut->hdr[3] = 4; + pOut->a[0] = mnX; + pOut->a[1] = mnY; + pOut->a[2] = mxX; + pOut->a[3] = mnY; + pOut->a[4] = mxX; + pOut->a[5] = mxY; + pOut->a[6] = mnX; + pOut->a[7] = mxY; + }else{ + sqlite3_free(p); + aCoord[0].f = mnX; + aCoord[1].f = mxX; + aCoord[2].f = mnY; + aCoord[3].f = mxY; + } + } + return pOut; +} + +/* +** Implementation of the geopoly_bbox(X) SQL function. +*/ +static void geopolyBBoxFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p = geopolyBBox(context, argv[0], 0, 0); + if( p ){ + sqlite3_result_blob(context, p->hdr, + 4+8*p->nVertex, SQLITE_TRANSIENT); + sqlite3_free(p); + } +} + +/* +** State vector for the geopoly_group_bbox() aggregate function. +*/ +typedef struct GeoBBox GeoBBox; +struct GeoBBox { + int isInit; + RtreeCoord a[4]; +}; + + +/* +** Implementation of the geopoly_group_bbox(X) aggregate SQL function. +*/ +static void geopolyBBoxStep( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + RtreeCoord a[4]; + int rc = SQLITE_OK; + (void)geopolyBBox(context, argv[0], a, &rc); + if( rc==SQLITE_OK ){ + GeoBBox *pBBox; + pBBox = (GeoBBox*)sqlite3_aggregate_context(context, sizeof(*pBBox)); + if( pBBox==0 ) return; + if( pBBox->isInit==0 ){ + pBBox->isInit = 1; + memcpy(pBBox->a, a, sizeof(RtreeCoord)*4); + }else{ + if( a[0].f < pBBox->a[0].f ) pBBox->a[0] = a[0]; + if( a[1].f > pBBox->a[1].f ) pBBox->a[1] = a[1]; + if( a[2].f < pBBox->a[2].f ) pBBox->a[2] = a[2]; + if( a[3].f > pBBox->a[3].f ) pBBox->a[3] = a[3]; + } + } +} +static void geopolyBBoxFinal( + sqlite3_context *context +){ + GeoPoly *p; + GeoBBox *pBBox; + pBBox = (GeoBBox*)sqlite3_aggregate_context(context, 0); + if( pBBox==0 ) return; + p = geopolyBBox(context, 0, pBBox->a, 0); + if( p ){ + sqlite3_result_blob(context, p->hdr, + 4+8*p->nVertex, SQLITE_TRANSIENT); + sqlite3_free(p); + } +} + + +/* +** Determine if point (x0,y0) is beneath line segment (x1,y1)->(x2,y2). +** Returns: +** +** +2 x0,y0 is on the line segement +** +** +1 x0,y0 is beneath line segment +** +** 0 x0,y0 is not on or beneath the line segment or the line segment +** is vertical and x0,y0 is not on the line segment +** +** The left-most coordinate min(x1,x2) is not considered to be part of +** the line segment for the purposes of this analysis. +*/ +static int pointBeneathLine( + double x0, double y0, + double x1, double y1, + double x2, double y2 +){ + double y; + if( x0==x1 && y0==y1 ) return 2; + if( x1x2 ) return 0; + }else if( x1>x2 ){ + if( x0<=x2 || x0>x1 ) return 0; + }else{ + /* Vertical line segment */ + if( x0!=x1 ) return 0; + if( y0y1 && y0>y2 ) return 0; + return 2; + } + y = y1 + (y2-y1)*(x0-x1)/(x2-x1); + if( y0==y ) return 2; + if( y0nVertex-1; ii++){ + v = pointBeneathLine(x0,y0,p1->a[ii*2],p1->a[ii*2+1], + p1->a[ii*2+2],p1->a[ii*2+3]); + if( v==2 ) break; + cnt += v; + } + if( v!=2 ){ + v = pointBeneathLine(x0,y0,p1->a[ii*2],p1->a[ii*2+1], + p1->a[0],p1->a[1]); + } + if( v==2 ){ + sqlite3_result_int(context, 1); + }else if( ((v+cnt)&1)==0 ){ + sqlite3_result_int(context, 0); + }else{ + sqlite3_result_int(context, 2); + } + sqlite3_free(p1); +} + +/* Forward declaration */ +static int geopolyOverlap(GeoPoly *p1, GeoPoly *p2); + +/* +** SQL function: geopoly_within(P1,P2) +** +** Return +2 if P1 and P2 are the same polygon +** Return +1 if P2 is contained within P1 +** Return 0 if any part of P2 is on the outside of P1 +** +*/ +static void geopolyWithinFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p1 = geopolyFuncParam(context, argv[0], 0); + GeoPoly *p2 = geopolyFuncParam(context, argv[1], 0); + if( p1 && p2 ){ + int x = geopolyOverlap(p1, p2); + if( x<0 ){ + sqlite3_result_error_nomem(context); + }else{ + sqlite3_result_int(context, x==2 ? 1 : x==4 ? 2 : 0); + } + } + sqlite3_free(p1); + sqlite3_free(p2); +} + +/* Objects used by the overlap algorihm. */ +typedef struct GeoEvent GeoEvent; +typedef struct GeoSegment GeoSegment; +typedef struct GeoOverlap GeoOverlap; +struct GeoEvent { + double x; /* X coordinate at which event occurs */ + int eType; /* 0 for ADD, 1 for REMOVE */ + GeoSegment *pSeg; /* The segment to be added or removed */ + GeoEvent *pNext; /* Next event in the sorted list */ +}; +struct GeoSegment { + double C, B; /* y = C*x + B */ + double y; /* Current y value */ + float y0; /* Initial y value */ + unsigned char side; /* 1 for p1, 2 for p2 */ + unsigned int idx; /* Which segment within the side */ + GeoSegment *pNext; /* Next segment in a list sorted by y */ +}; +struct GeoOverlap { + GeoEvent *aEvent; /* Array of all events */ + GeoSegment *aSegment; /* Array of all segments */ + int nEvent; /* Number of events */ + int nSegment; /* Number of segments */ +}; + +/* +** Add a single segment and its associated events. +*/ +static void geopolyAddOneSegment( + GeoOverlap *p, + GeoCoord x0, + GeoCoord y0, + GeoCoord x1, + GeoCoord y1, + unsigned char side, + unsigned int idx +){ + GeoSegment *pSeg; + GeoEvent *pEvent; + if( x0==x1 ) return; /* Ignore vertical segments */ + if( x0>x1 ){ + GeoCoord t = x0; + x0 = x1; + x1 = t; + t = y0; + y0 = y1; + y1 = t; + } + pSeg = p->aSegment + p->nSegment; + p->nSegment++; + pSeg->C = (y1-y0)/(x1-x0); + pSeg->B = y1 - x1*pSeg->C; + pSeg->y0 = y0; + pSeg->side = side; + pSeg->idx = idx; + pEvent = p->aEvent + p->nEvent; + p->nEvent++; + pEvent->x = x0; + pEvent->eType = 0; + pEvent->pSeg = pSeg; + pEvent = p->aEvent + p->nEvent; + p->nEvent++; + pEvent->x = x1; + pEvent->eType = 1; + pEvent->pSeg = pSeg; +} + + + +/* +** Insert all segments and events for polygon pPoly. +*/ +static void geopolyAddSegments( + GeoOverlap *p, /* Add segments to this Overlap object */ + GeoPoly *pPoly, /* Take all segments from this polygon */ + unsigned char side /* The side of pPoly */ +){ + unsigned int i; + GeoCoord *x; + for(i=0; i<(unsigned)pPoly->nVertex-1; i++){ + x = pPoly->a + (i*2); + geopolyAddOneSegment(p, x[0], x[1], x[2], x[3], side, i); + } + x = pPoly->a + (i*2); + geopolyAddOneSegment(p, x[0], x[1], pPoly->a[0], pPoly->a[1], side, i); +} + +/* +** Merge two lists of sorted events by X coordinate +*/ +static GeoEvent *geopolyEventMerge(GeoEvent *pLeft, GeoEvent *pRight){ + GeoEvent head, *pLast; + head.pNext = 0; + pLast = &head; + while( pRight && pLeft ){ + if( pRight->x <= pLeft->x ){ + pLast->pNext = pRight; + pLast = pRight; + pRight = pRight->pNext; + }else{ + pLast->pNext = pLeft; + pLast = pLeft; + pLeft = pLeft->pNext; + } + } + pLast->pNext = pRight ? pRight : pLeft; + return head.pNext; +} + +/* +** Sort an array of nEvent event objects into a list. +*/ +static GeoEvent *geopolySortEventsByX(GeoEvent *aEvent, int nEvent){ + int mx = 0; + int i, j; + GeoEvent *p; + GeoEvent *a[50]; + for(i=0; ipNext = 0; + for(j=0; j=mx ) mx = j+1; + } + p = 0; + for(i=0; iy - pLeft->y; + if( r==0.0 ) r = pRight->C - pLeft->C; + if( r<0.0 ){ + pLast->pNext = pRight; + pLast = pRight; + pRight = pRight->pNext; + }else{ + pLast->pNext = pLeft; + pLast = pLeft; + pLeft = pLeft->pNext; + } + } + pLast->pNext = pRight ? pRight : pLeft; + return head.pNext; +} + +/* +** Sort a list of GeoSegments in order of increasing Y and in the event of +** a tie, increasing C (slope). +*/ +static GeoSegment *geopolySortSegmentsByYAndC(GeoSegment *pList){ + int mx = 0; + int i; + GeoSegment *p; + GeoSegment *a[50]; + while( pList ){ + p = pList; + pList = pList->pNext; + p->pNext = 0; + for(i=0; i=mx ) mx = i+1; + } + p = 0; + for(i=0; inVertex + p2->nVertex + 2; + GeoOverlap *p; + int nByte; + GeoEvent *pThisEvent; + double rX; + int rc = 0; + int needSort = 0; + GeoSegment *pActive = 0; + GeoSegment *pSeg; + unsigned char aOverlap[4]; + + nByte = sizeof(GeoEvent)*nVertex*2 + + sizeof(GeoSegment)*nVertex + + sizeof(GeoOverlap); + p = sqlite3_malloc( nByte ); + if( p==0 ) return -1; + p->aEvent = (GeoEvent*)&p[1]; + p->aSegment = (GeoSegment*)&p->aEvent[nVertex*2]; + p->nEvent = p->nSegment = 0; + geopolyAddSegments(p, p1, 1); + geopolyAddSegments(p, p2, 2); + pThisEvent = geopolySortEventsByX(p->aEvent, p->nEvent); + rX = pThisEvent->x==0.0 ? -1.0 : 0.0; + memset(aOverlap, 0, sizeof(aOverlap)); + while( pThisEvent ){ + if( pThisEvent->x!=rX ){ + GeoSegment *pPrev = 0; + int iMask = 0; + GEODEBUG(("Distinct X: %g\n", pThisEvent->x)); + rX = pThisEvent->x; + if( needSort ){ + GEODEBUG(("SORT\n")); + pActive = geopolySortSegmentsByYAndC(pActive); + needSort = 0; + } + for(pSeg=pActive; pSeg; pSeg=pSeg->pNext){ + if( pPrev ){ + if( pPrev->y!=pSeg->y ){ + GEODEBUG(("MASK: %d\n", iMask)); + aOverlap[iMask] = 1; + } + } + iMask ^= pSeg->side; + pPrev = pSeg; + } + pPrev = 0; + for(pSeg=pActive; pSeg; pSeg=pSeg->pNext){ + double y = pSeg->C*rX + pSeg->B; + GEODEBUG(("Segment %d.%d %g->%g\n", pSeg->side, pSeg->idx, pSeg->y, y)); + pSeg->y = y; + if( pPrev ){ + if( pPrev->y>pSeg->y && pPrev->side!=pSeg->side ){ + rc = 1; + GEODEBUG(("Crossing: %d.%d and %d.%d\n", + pPrev->side, pPrev->idx, + pSeg->side, pSeg->idx)); + goto geopolyOverlapDone; + }else if( pPrev->y!=pSeg->y ){ + GEODEBUG(("MASK: %d\n", iMask)); + aOverlap[iMask] = 1; + } + } + iMask ^= pSeg->side; + pPrev = pSeg; + } + } + GEODEBUG(("%s %d.%d C=%g B=%g\n", + pThisEvent->eType ? "RM " : "ADD", + pThisEvent->pSeg->side, pThisEvent->pSeg->idx, + pThisEvent->pSeg->C, + pThisEvent->pSeg->B)); + if( pThisEvent->eType==0 ){ + /* Add a segment */ + pSeg = pThisEvent->pSeg; + pSeg->y = pSeg->y0; + pSeg->pNext = pActive; + pActive = pSeg; + needSort = 1; + }else{ + /* Remove a segment */ + if( pActive==pThisEvent->pSeg ){ + pActive = pActive->pNext; + }else{ + for(pSeg=pActive; pSeg; pSeg=pSeg->pNext){ + if( pSeg->pNext==pThisEvent->pSeg ){ + pSeg->pNext = pSeg->pNext->pNext; + break; + } + } + } + } + pThisEvent = pThisEvent->pNext; + } + if( aOverlap[3]==0 ){ + rc = 0; + }else if( aOverlap[1]!=0 && aOverlap[2]==0 ){ + rc = 3; + }else if( aOverlap[1]==0 && aOverlap[2]!=0 ){ + rc = 2; + }else if( aOverlap[1]==0 && aOverlap[2]==0 ){ + rc = 4; + }else{ + rc = 1; + } + +geopolyOverlapDone: + sqlite3_free(p); + return rc; +} + +/* +** SQL function: geopoly_overlap(P1,P2) +** +** Determine whether or not P1 and P2 overlap. Return value: +** +** 0 The two polygons are disjoint +** 1 They overlap +** 2 P1 is completely contained within P2 +** 3 P2 is completely contained within P1 +** 4 P1 and P2 are the same polygon +** NULL Either P1 or P2 or both are not valid polygons +*/ +static void geopolyOverlapFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + GeoPoly *p1 = geopolyFuncParam(context, argv[0], 0); + GeoPoly *p2 = geopolyFuncParam(context, argv[1], 0); + if( p1 && p2 ){ + int x = geopolyOverlap(p1, p2); + if( x<0 ){ + sqlite3_result_error_nomem(context); + }else{ + sqlite3_result_int(context, x); + } + } + sqlite3_free(p1); + sqlite3_free(p2); +} + +/* +** Enable or disable debugging output +*/ +static void geopolyDebugFunc( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ +#ifdef GEOPOLY_ENABLE_DEBUG + geo_debug = sqlite3_value_int(argv[0]); +#endif +} + +/* +** This function is the implementation of both the xConnect and xCreate +** methods of the geopoly virtual table. +** +** argv[0] -> module name +** argv[1] -> database name +** argv[2] -> table name +** argv[...] -> column names... +*/ +static int geopolyInit( + sqlite3 *db, /* Database connection */ + void *pAux, /* One of the RTREE_COORD_* constants */ + int argc, const char *const*argv, /* Parameters to CREATE TABLE statement */ + sqlite3_vtab **ppVtab, /* OUT: New virtual table */ + char **pzErr, /* OUT: Error message, if any */ + int isCreate /* True for xCreate, false for xConnect */ +){ + int rc = SQLITE_OK; + Rtree *pRtree; + int nDb; /* Length of string argv[1] */ + int nName; /* Length of string argv[2] */ + sqlite3_str *pSql; + char *zSql; + int ii; + + sqlite3_vtab_config(db, SQLITE_VTAB_CONSTRAINT_SUPPORT, 1); + + /* Allocate the sqlite3_vtab structure */ + nDb = (int)strlen(argv[1]); + nName = (int)strlen(argv[2]); + pRtree = (Rtree *)sqlite3_malloc(sizeof(Rtree)+nDb+nName+2); + if( !pRtree ){ + return SQLITE_NOMEM; + } + memset(pRtree, 0, sizeof(Rtree)+nDb+nName+2); + pRtree->nBusy = 1; + pRtree->base.pModule = &rtreeModule; + pRtree->zDb = (char *)&pRtree[1]; + pRtree->zName = &pRtree->zDb[nDb+1]; + pRtree->eCoordType = RTREE_COORD_REAL32; + pRtree->nDim = 2; + pRtree->nDim2 = 4; + memcpy(pRtree->zDb, argv[1], nDb); + memcpy(pRtree->zName, argv[2], nName); + + + /* Create/Connect to the underlying relational database schema. If + ** that is successful, call sqlite3_declare_vtab() to configure + ** the r-tree table schema. + */ + pSql = sqlite3_str_new(db); + sqlite3_str_appendf(pSql, "CREATE TABLE x(_shape"); + pRtree->nAux = 1; /* Add one for _shape */ + pRtree->nAuxNotNull = 1; /* The _shape column is always not-null */ + for(ii=3; iinAux++; + sqlite3_str_appendf(pSql, ",%s", argv[ii]); + } + sqlite3_str_appendf(pSql, ");"); + zSql = sqlite3_str_finish(pSql); + if( !zSql ){ + rc = SQLITE_NOMEM; + }else if( SQLITE_OK!=(rc = sqlite3_declare_vtab(db, zSql)) ){ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + } + sqlite3_free(zSql); + if( rc ) goto geopolyInit_fail; + pRtree->nBytesPerCell = 8 + pRtree->nDim2*4; + + /* Figure out the node size to use. */ + rc = getNodeSize(db, pRtree, isCreate, pzErr); + if( rc ) goto geopolyInit_fail; + rc = rtreeSqlInit(pRtree, db, argv[1], argv[2], isCreate); + if( rc ){ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + goto geopolyInit_fail; + } + + *ppVtab = (sqlite3_vtab *)pRtree; + return SQLITE_OK; + +geopolyInit_fail: + if( rc==SQLITE_OK ) rc = SQLITE_ERROR; + assert( *ppVtab==0 ); + assert( pRtree->nBusy==1 ); + rtreeRelease(pRtree); + return rc; +} + + +/* +** GEOPOLY virtual table module xCreate method. +*/ +static int geopolyCreate( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + return geopolyInit(db, pAux, argc, argv, ppVtab, pzErr, 1); +} + +/* +** GEOPOLY virtual table module xConnect method. +*/ +static int geopolyConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + return geopolyInit(db, pAux, argc, argv, ppVtab, pzErr, 0); +} + + +/* +** GEOPOLY virtual table module xFilter method. +** +** Query plans: +** +** 1 rowid lookup +** 2 search for objects overlapping the same bounding box +** that contains polygon argv[0] +** 3 search for objects overlapping the same bounding box +** that contains polygon argv[0] +** 4 full table scan +*/ +static int geopolyFilter( + sqlite3_vtab_cursor *pVtabCursor, /* The cursor to initialize */ + int idxNum, /* Query plan */ + const char *idxStr, /* Not Used */ + int argc, sqlite3_value **argv /* Parameters to the query plan */ +){ + Rtree *pRtree = (Rtree *)pVtabCursor->pVtab; + RtreeCursor *pCsr = (RtreeCursor *)pVtabCursor; + RtreeNode *pRoot = 0; + int rc = SQLITE_OK; + int iCell = 0; + sqlite3_stmt *pStmt; + + rtreeReference(pRtree); + + /* Reset the cursor to the same state as rtreeOpen() leaves it in. */ + freeCursorConstraints(pCsr); + sqlite3_free(pCsr->aPoint); + pStmt = pCsr->pReadAux; + memset(pCsr, 0, sizeof(RtreeCursor)); + pCsr->base.pVtab = (sqlite3_vtab*)pRtree; + pCsr->pReadAux = pStmt; + + pCsr->iStrategy = idxNum; + if( idxNum==1 ){ + /* Special case - lookup by rowid. */ + RtreeNode *pLeaf; /* Leaf on which the required cell resides */ + RtreeSearchPoint *p; /* Search point for the leaf */ + i64 iRowid = sqlite3_value_int64(argv[0]); + i64 iNode = 0; + rc = findLeafNode(pRtree, iRowid, &pLeaf, &iNode); + if( rc==SQLITE_OK && pLeaf!=0 ){ + p = rtreeSearchPointNew(pCsr, RTREE_ZERO, 0); + assert( p!=0 ); /* Always returns pCsr->sPoint */ + pCsr->aNode[0] = pLeaf; + p->id = iNode; + p->eWithin = PARTLY_WITHIN; + rc = nodeRowidIndex(pRtree, pLeaf, iRowid, &iCell); + p->iCell = (u8)iCell; + RTREE_QUEUE_TRACE(pCsr, "PUSH-F1:"); + }else{ + pCsr->atEOF = 1; + } + }else{ + /* Normal case - r-tree scan. Set up the RtreeCursor.aConstraint array + ** with the configured constraints. + */ + rc = nodeAcquire(pRtree, 1, 0, &pRoot); + if( rc==SQLITE_OK && idxNum<=3 ){ + RtreeCoord bbox[4]; + RtreeConstraint *p; + assert( argc==1 ); + geopolyBBox(0, argv[0], bbox, &rc); + if( rc ){ + goto geopoly_filter_end; + } + pCsr->aConstraint = p = sqlite3_malloc(sizeof(RtreeConstraint)*4); + pCsr->nConstraint = 4; + if( p==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(pCsr->aConstraint, 0, sizeof(RtreeConstraint)*4); + memset(pCsr->anQueue, 0, sizeof(u32)*(pRtree->iDepth + 1)); + if( idxNum==2 ){ + /* Overlap query */ + p->op = 'B'; + p->iCoord = 0; + p->u.rValue = bbox[1].f; + p++; + p->op = 'D'; + p->iCoord = 1; + p->u.rValue = bbox[0].f; + p++; + p->op = 'B'; + p->iCoord = 2; + p->u.rValue = bbox[3].f; + p++; + p->op = 'D'; + p->iCoord = 3; + p->u.rValue = bbox[2].f; + }else{ + /* Within query */ + p->op = 'D'; + p->iCoord = 0; + p->u.rValue = bbox[0].f; + p++; + p->op = 'B'; + p->iCoord = 1; + p->u.rValue = bbox[1].f; + p++; + p->op = 'D'; + p->iCoord = 2; + p->u.rValue = bbox[2].f; + p++; + p->op = 'B'; + p->iCoord = 3; + p->u.rValue = bbox[3].f; + } + } + } + if( rc==SQLITE_OK ){ + RtreeSearchPoint *pNew; + pNew = rtreeSearchPointNew(pCsr, RTREE_ZERO, (u8)(pRtree->iDepth+1)); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + goto geopoly_filter_end; + } + pNew->id = 1; + pNew->iCell = 0; + pNew->eWithin = PARTLY_WITHIN; + assert( pCsr->bPoint==1 ); + pCsr->aNode[0] = pRoot; + pRoot = 0; + RTREE_QUEUE_TRACE(pCsr, "PUSH-Fm:"); + rc = rtreeStepToLeaf(pCsr); + } + } + +geopoly_filter_end: + nodeRelease(pRtree, pRoot); + rtreeRelease(pRtree); + return rc; +} + +/* +** Rtree virtual table module xBestIndex method. There are three +** table scan strategies to choose from (in order from most to +** least desirable): +** +** idxNum idxStr Strategy +** ------------------------------------------------ +** 1 "rowid" Direct lookup by rowid. +** 2 "rtree" R-tree overlap query using geopoly_overlap() +** 3 "rtree" R-tree within query using geopoly_within() +** 4 "fullscan" full-table scan. +** ------------------------------------------------ +*/ +static int geopolyBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ + int ii; + int iRowidTerm = -1; + int iFuncTerm = -1; + int idxNum = 0; + + for(ii=0; iinConstraint; ii++){ + struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[ii]; + if( !p->usable ) continue; + if( p->iColumn<0 && p->op==SQLITE_INDEX_CONSTRAINT_EQ ){ + iRowidTerm = ii; + break; + } + if( p->iColumn==0 && p->op>=SQLITE_INDEX_CONSTRAINT_FUNCTION ){ + /* p->op==SQLITE_INDEX_CONSTRAINT_FUNCTION for geopoly_overlap() + ** p->op==(SQLITE_INDEX_CONTRAINT_FUNCTION+1) for geopoly_within(). + ** See geopolyFindFunction() */ + iFuncTerm = ii; + idxNum = p->op - SQLITE_INDEX_CONSTRAINT_FUNCTION + 2; + } + } + + if( iRowidTerm>=0 ){ + pIdxInfo->idxNum = 1; + pIdxInfo->idxStr = "rowid"; + pIdxInfo->aConstraintUsage[iRowidTerm].argvIndex = 1; + pIdxInfo->aConstraintUsage[iRowidTerm].omit = 1; + pIdxInfo->estimatedCost = 30.0; + pIdxInfo->estimatedRows = 1; + pIdxInfo->idxFlags = SQLITE_INDEX_SCAN_UNIQUE; + return SQLITE_OK; + } + if( iFuncTerm>=0 ){ + pIdxInfo->idxNum = idxNum; + pIdxInfo->idxStr = "rtree"; + pIdxInfo->aConstraintUsage[iFuncTerm].argvIndex = 1; + pIdxInfo->aConstraintUsage[iFuncTerm].omit = 0; + pIdxInfo->estimatedCost = 300.0; + pIdxInfo->estimatedRows = 10; + return SQLITE_OK; + } + pIdxInfo->idxNum = 4; + pIdxInfo->idxStr = "fullscan"; + pIdxInfo->estimatedCost = 3000000.0; + pIdxInfo->estimatedRows = 100000; + return SQLITE_OK; +} + + +/* +** GEOPOLY virtual table module xColumn method. +*/ +static int geopolyColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ + Rtree *pRtree = (Rtree *)cur->pVtab; + RtreeCursor *pCsr = (RtreeCursor *)cur; + RtreeSearchPoint *p = rtreeSearchPointFirst(pCsr); + int rc = SQLITE_OK; + RtreeNode *pNode = rtreeNodeOfFirstSearchPoint(pCsr, &rc); + + if( rc ) return rc; + if( p==0 ) return SQLITE_OK; + if( i==0 && sqlite3_vtab_nochange(ctx) ) return SQLITE_OK; + if( i<=pRtree->nAux ){ + if( !pCsr->bAuxValid ){ + if( pCsr->pReadAux==0 ){ + rc = sqlite3_prepare_v3(pRtree->db, pRtree->zReadAuxSql, -1, 0, + &pCsr->pReadAux, 0); + if( rc ) return rc; + } + sqlite3_bind_int64(pCsr->pReadAux, 1, + nodeGetRowid(pRtree, pNode, p->iCell)); + rc = sqlite3_step(pCsr->pReadAux); + if( rc==SQLITE_ROW ){ + pCsr->bAuxValid = 1; + }else{ + sqlite3_reset(pCsr->pReadAux); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; + return rc; + } + } + sqlite3_result_value(ctx, sqlite3_column_value(pCsr->pReadAux, i+2)); + } + return SQLITE_OK; +} + + +/* +** The xUpdate method for GEOPOLY module virtual tables. +** +** For DELETE: +** +** argv[0] = the rowid to be deleted +** +** For INSERT: +** +** argv[0] = SQL NULL +** argv[1] = rowid to insert, or an SQL NULL to select automatically +** argv[2] = _shape column +** argv[3] = first application-defined column.... +** +** For UPDATE: +** +** argv[0] = rowid to modify. Never NULL +** argv[1] = rowid after the change. Never NULL +** argv[2] = new value for _shape +** argv[3] = new value for first application-defined column.... +*/ +static int geopolyUpdate( + sqlite3_vtab *pVtab, + int nData, + sqlite3_value **aData, + sqlite_int64 *pRowid +){ + Rtree *pRtree = (Rtree *)pVtab; + int rc = SQLITE_OK; + RtreeCell cell; /* New cell to insert if nData>1 */ + i64 oldRowid; /* The old rowid */ + int oldRowidValid; /* True if oldRowid is valid */ + i64 newRowid; /* The new rowid */ + int newRowidValid; /* True if newRowid is valid */ + int coordChange = 0; /* Change in coordinates */ + + if( pRtree->nNodeRef ){ + /* Unable to write to the btree while another cursor is reading from it, + ** since the write might do a rebalance which would disrupt the read + ** cursor. */ + return SQLITE_LOCKED_VTAB; + } + rtreeReference(pRtree); + assert(nData>=1); + + oldRowidValid = sqlite3_value_type(aData[0])!=SQLITE_NULL;; + oldRowid = oldRowidValid ? sqlite3_value_int64(aData[0]) : 0; + newRowidValid = nData>1 && sqlite3_value_type(aData[1])!=SQLITE_NULL; + newRowid = newRowidValid ? sqlite3_value_int64(aData[1]) : 0; + cell.iRowid = newRowid; + + if( nData>1 /* not a DELETE */ + && (!oldRowidValid /* INSERT */ + || !sqlite3_value_nochange(aData[2]) /* UPDATE _shape */ + || oldRowid!=newRowid) /* Rowid change */ + ){ + geopolyBBox(0, aData[2], cell.aCoord, &rc); + if( rc ){ + if( rc==SQLITE_ERROR ){ + pVtab->zErrMsg = + sqlite3_mprintf("_shape does not contain a valid polygon"); + } + goto geopoly_update_end; + } + coordChange = 1; + + /* If a rowid value was supplied, check if it is already present in + ** the table. If so, the constraint has failed. */ + if( newRowidValid && (!oldRowidValid || oldRowid!=newRowid) ){ + int steprc; + sqlite3_bind_int64(pRtree->pReadRowid, 1, cell.iRowid); + steprc = sqlite3_step(pRtree->pReadRowid); + rc = sqlite3_reset(pRtree->pReadRowid); + if( SQLITE_ROW==steprc ){ + if( sqlite3_vtab_on_conflict(pRtree->db)==SQLITE_REPLACE ){ + rc = rtreeDeleteRowid(pRtree, cell.iRowid); + }else{ + rc = rtreeConstraintError(pRtree, 0); + } + } + } + } + + /* If aData[0] is not an SQL NULL value, it is the rowid of a + ** record to delete from the r-tree table. The following block does + ** just that. + */ + if( rc==SQLITE_OK && (nData==1 || (coordChange && oldRowidValid)) ){ + rc = rtreeDeleteRowid(pRtree, oldRowid); + } + + /* If the aData[] array contains more than one element, elements + ** (aData[2]..aData[argc-1]) contain a new record to insert into + ** the r-tree structure. + */ + if( rc==SQLITE_OK && nData>1 && coordChange ){ + /* Insert the new record into the r-tree */ + RtreeNode *pLeaf = 0; + if( !newRowidValid ){ + rc = rtreeNewRowid(pRtree, &cell.iRowid); + } + *pRowid = cell.iRowid; + if( rc==SQLITE_OK ){ + rc = ChooseLeaf(pRtree, &cell, 0, &pLeaf); + } + if( rc==SQLITE_OK ){ + int rc2; + pRtree->iReinsertHeight = -1; + rc = rtreeInsertCell(pRtree, pLeaf, &cell, 0); + rc2 = nodeRelease(pRtree, pLeaf); + if( rc==SQLITE_OK ){ + rc = rc2; + } + } + } + + /* Change the data */ + if( rc==SQLITE_OK && nData>1 ){ + sqlite3_stmt *pUp = pRtree->pWriteAux; + int jj; + int nChange = 0; + sqlite3_bind_int64(pUp, 1, cell.iRowid); + assert( pRtree->nAux>=1 ); + if( sqlite3_value_nochange(aData[2]) ){ + sqlite3_bind_null(pUp, 2); + }else{ + GeoPoly *p = 0; + if( sqlite3_value_type(aData[2])==SQLITE_TEXT + && (p = geopolyFuncParam(0, aData[2], &rc))!=0 + && rc==SQLITE_OK + ){ + sqlite3_bind_blob(pUp, 2, p->hdr, 4+8*p->nVertex, SQLITE_TRANSIENT); + }else{ + sqlite3_bind_value(pUp, 2, aData[2]); + } + sqlite3_free(p); + nChange = 1; + } + for(jj=1; jjnAux; jj++){ + nChange++; + sqlite3_bind_value(pUp, jj+2, aData[jj+2]); + } + if( nChange ){ + sqlite3_step(pUp); + rc = sqlite3_reset(pUp); + } + } + +geopoly_update_end: + rtreeRelease(pRtree); + return rc; +} + +/* +** Report that geopoly_overlap() is an overloaded function suitable +** for use in xBestIndex. +*/ +static int geopolyFindFunction( + sqlite3_vtab *pVtab, + int nArg, + const char *zName, + void (**pxFunc)(sqlite3_context*,int,sqlite3_value**), + void **ppArg +){ + if( sqlite3_stricmp(zName, "geopoly_overlap")==0 ){ + *pxFunc = geopolyOverlapFunc; + *ppArg = 0; + return SQLITE_INDEX_CONSTRAINT_FUNCTION; + } + if( sqlite3_stricmp(zName, "geopoly_within")==0 ){ + *pxFunc = geopolyWithinFunc; + *ppArg = 0; + return SQLITE_INDEX_CONSTRAINT_FUNCTION+1; + } + return 0; +} + + +static sqlite3_module geopolyModule = { + 3, /* iVersion */ + geopolyCreate, /* xCreate - create a table */ + geopolyConnect, /* xConnect - connect to an existing table */ + geopolyBestIndex, /* xBestIndex - Determine search strategy */ + rtreeDisconnect, /* xDisconnect - Disconnect from a table */ + rtreeDestroy, /* xDestroy - Drop a table */ + rtreeOpen, /* xOpen - open a cursor */ + rtreeClose, /* xClose - close a cursor */ + geopolyFilter, /* xFilter - configure scan constraints */ + rtreeNext, /* xNext - advance a cursor */ + rtreeEof, /* xEof */ + geopolyColumn, /* xColumn - read data */ + rtreeRowid, /* xRowid - read data */ + geopolyUpdate, /* xUpdate - write data */ + rtreeBeginTransaction, /* xBegin - begin transaction */ + rtreeEndTransaction, /* xSync - sync transaction */ + rtreeEndTransaction, /* xCommit - commit transaction */ + rtreeEndTransaction, /* xRollback - rollback transaction */ + geopolyFindFunction, /* xFindFunction - function overloading */ + rtreeRename, /* xRename - rename the table */ + rtreeSavepoint, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ + rtreeShadowName /* xShadowName */ +}; + +static int sqlite3_geopoly_init(sqlite3 *db){ + int rc = SQLITE_OK; + static const struct { + void (*xFunc)(sqlite3_context*,int,sqlite3_value**); + signed char nArg; + unsigned char bPure; + const char *zName; + } aFunc[] = { + { geopolyAreaFunc, 1, 1, "geopoly_area" }, + { geopolyBlobFunc, 1, 1, "geopoly_blob" }, + { geopolyJsonFunc, 1, 1, "geopoly_json" }, + { geopolySvgFunc, -1, 1, "geopoly_svg" }, + { geopolyWithinFunc, 2, 1, "geopoly_within" }, + { geopolyContainsPointFunc, 3, 1, "geopoly_contains_point" }, + { geopolyOverlapFunc, 2, 1, "geopoly_overlap" }, + { geopolyDebugFunc, 1, 0, "geopoly_debug" }, + { geopolyBBoxFunc, 1, 1, "geopoly_bbox" }, + { geopolyXformFunc, 7, 1, "geopoly_xform" }, + { geopolyRegularFunc, 4, 1, "geopoly_regular" }, + { geopolyCcwFunc, 1, 1, "geopoly_ccw" }, + }; + static const struct { + void (*xStep)(sqlite3_context*,int,sqlite3_value**); + void (*xFinal)(sqlite3_context*); + const char *zName; + } aAgg[] = { + { geopolyBBoxStep, geopolyBBoxFinal, "geopoly_group_bbox" }, + }; + int i; + for(i=0; i @@ -169081,6 +185402,26 @@ #endif /* +** This function is called when an ICU function called from within +** the implementation of an SQL scalar function returns an error. +** +** The scalar function context passed as the first argument is +** loaded with an error message based on the following two args. +*/ +static void icuFunctionError( + sqlite3_context *pCtx, /* SQLite scalar function context */ + const char *zName, /* Name of ICU function that failed */ + UErrorCode e /* Error code returned by ICU function */ +){ + char zBuf[128]; + sqlite3_snprintf(128, zBuf, "ICU error: %s(): %s", zName, u_errorName(e)); + zBuf[127] = '\0'; + sqlite3_result_error(pCtx, zBuf, -1); +} + +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) + +/* ** Maximum length (in bytes) of the pattern in a LIKE or GLOB ** operator. */ @@ -169137,8 +185478,8 @@ const uint8_t *zString, /* The UTF-8 string to compare against */ const UChar32 uEsc /* The escape character */ ){ - static const int MATCH_ONE = (UChar32)'_'; - static const int MATCH_ALL = (UChar32)'%'; + static const uint32_t MATCH_ONE = (uint32_t)'_'; + static const uint32_t MATCH_ALL = (uint32_t)'%'; int prevEscape = 0; /* True if the previous character was uEsc */ @@ -169145,7 +185486,7 @@ while( 1 ){ /* Read (and consume) the next character from the input pattern. */ - UChar32 uPattern; + uint32_t uPattern; SQLITE_ICU_READ_UTF8(zPattern, uPattern); if( uPattern==0 ) break; @@ -169187,16 +185528,16 @@ if( *zString==0 ) return 0; SQLITE_ICU_SKIP_UTF8(zString); - }else if( !prevEscape && uPattern==uEsc){ + }else if( !prevEscape && uPattern==(uint32_t)uEsc){ /* Case 3. */ prevEscape = 1; }else{ /* Case 4. */ - UChar32 uString; + uint32_t uString; SQLITE_ICU_READ_UTF8(zString, uString); - uString = u_foldCase(uString, U_FOLD_CASE_DEFAULT); - uPattern = u_foldCase(uPattern, U_FOLD_CASE_DEFAULT); + uString = (uint32_t)u_foldCase((UChar32)uString, U_FOLD_CASE_DEFAULT); + uPattern = (uint32_t)u_foldCase((UChar32)uPattern, U_FOLD_CASE_DEFAULT); if( uString!=uPattern ){ return 0; } @@ -169260,24 +185601,6 @@ } /* -** This function is called when an ICU function called from within -** the implementation of an SQL scalar function returns an error. -** -** The scalar function context passed as the first argument is -** loaded with an error message based on the following two args. -*/ -static void icuFunctionError( - sqlite3_context *pCtx, /* SQLite scalar function context */ - const char *zName, /* Name of ICU function that failed */ - UErrorCode e /* Error code returned by ICU function */ -){ - char zBuf[128]; - sqlite3_snprintf(128, zBuf, "ICU error: %s(): %s", zName, u_errorName(e)); - zBuf[127] = '\0'; - sqlite3_result_error(pCtx, zBuf, -1); -} - -/* ** Function to delete compiled regexp objects. Registered as ** a destructor function with sqlite3_set_auxdata(). */ @@ -169442,6 +185765,8 @@ assert( 0 ); /* Unreachable */ } +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) */ + /* ** Collation sequence destructor function. The pCtx argument points to ** a UCollator structure previously allocated using ucol_open(). @@ -169536,6 +185861,7 @@ void (*xFunc)(sqlite3_context*,int,sqlite3_value**); } scalars[] = { {"icu_load_collation", 2, SQLITE_UTF8, 1, icuLoadCollation}, +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) {"regexp", 2, SQLITE_ANY|SQLITE_DETERMINISTIC, 0, icuRegexpFunc}, {"lower", 1, SQLITE_UTF16|SQLITE_DETERMINISTIC, 0, icuCaseFunc16}, {"lower", 2, SQLITE_UTF16|SQLITE_DETERMINISTIC, 0, icuCaseFunc16}, @@ -169547,10 +185873,10 @@ {"upper", 2, SQLITE_UTF8|SQLITE_DETERMINISTIC, 1, icuCaseFunc16}, {"like", 2, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuLikeFunc}, {"like", 3, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuLikeFunc}, +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) */ }; int rc = SQLITE_OK; int i; - for(i=0; rc==SQLITE_OK && i<(int)(sizeof(scalars)/sizeof(scalars[0])); i++){ const struct IcuScalar *p = &scalars[i]; @@ -170293,6 +186619,28 @@ ); /* +** Configure a limit for the amount of temp space that may be used by +** the RBU handle passed as the first argument. The new limit is specified +** in bytes by the second parameter. If it is positive, the limit is updated. +** If the second parameter to this function is passed zero, then the limit +** is removed entirely. If the second parameter is negative, the limit is +** not modified (this is useful for querying the current limit). +** +** In all cases the returned value is the current limit in bytes (zero +** indicates unlimited). +** +** If the temp space limit is exceeded during operation, an SQLITE_FULL +** error is returned. +*/ +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size_limit(sqlite3rbu*, sqlite3_int64); + +/* +** Return the current amount of temp file space, in bytes, currently used by +** the RBU handle passed as the only argument. +*/ +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size(sqlite3rbu*); + +/* ** Internally, each RBU connection uses a separate SQLite database ** connection to access the target and rbu update databases. This ** API allows the application direct access to these database handles. @@ -170418,7 +186766,7 @@ ** table exists but is not correctly populated, the value of the *pnOne ** output variable during stage 1 is undefined. */ -SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *pRbu, int *pnOne, int *pnTwo); +SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *pRbu, int *pnOne, int*pnTwo); /* ** Obtain an indication as to the current stage of an RBU update or vacuum. @@ -170528,6 +186876,13 @@ /* Maximum number of prepared UPDATE statements held by this module */ #define SQLITE_RBU_UPDATE_CACHESIZE 16 +/* Delta checksums disabled by default. Compile with -DRBU_ENABLE_DELTA_CKSUM +** to enable checksum verification. +*/ +#ifndef RBU_ENABLE_DELTA_CKSUM +# define RBU_ENABLE_DELTA_CKSUM 0 +#endif + /* ** Swap two objects of type TYPE. */ @@ -170578,6 +186933,10 @@ ** ** RBU_STATE_OALSZ: ** Valid if STAGE==1. The size in bytes of the *-oal file. +** +** RBU_STATE_DATATBL: +** Only valid if STAGE==1. The RBU database name of the table +** currently being read. */ #define RBU_STATE_STAGE 1 #define RBU_STATE_TBL 2 @@ -170588,6 +186947,7 @@ #define RBU_STATE_COOKIE 7 #define RBU_STATE_OALSZ 8 #define RBU_STATE_PHASEONESTEP 9 +#define RBU_STATE_DATATBL 10 #define RBU_STAGE_OAL 1 #define RBU_STAGE_MOVE 2 @@ -170630,6 +186990,7 @@ struct RbuState { int eStage; char *zTbl; + char *zDataTbl; char *zIdx; i64 iWalCksum; int nRow; @@ -170803,6 +187164,8 @@ int pgsz; u8 *aBuf; i64 iWalCksum; + i64 szTemp; /* Current size of all temp files in use */ + i64 szTempLimit; /* Total size limit for temp files */ /* Used in RBU vacuum mode only */ int nRbu; /* Number of RBU VFS in the stack */ @@ -170811,17 +187174,27 @@ /* ** An rbu VFS is implemented using an instance of this structure. +** +** Variable pRbu is only non-NULL for automatically created RBU VFS objects. +** It is NULL for RBU VFS objects created explicitly using +** sqlite3rbu_create_vfs(). It is used to track the total amount of temp +** space used by the RBU handle. */ struct rbu_vfs { sqlite3_vfs base; /* rbu VFS shim methods */ sqlite3_vfs *pRealVfs; /* Underlying VFS */ sqlite3_mutex *mutex; /* Mutex to protect pMain */ - rbu_file *pMain; /* Linked list of main db files */ + sqlite3rbu *pRbu; /* Owner RBU object */ + rbu_file *pMain; /* List of main db files */ + rbu_file *pMainRbu; /* List of main db files with pRbu!=0 */ }; /* ** Each file opened by an rbu VFS is represented by an instance of ** the following structure. +** +** If this is a temporary file (pRbu!=0 && flags&DELETE_ON_CLOSE), variable +** "sz" is set to the current size of the database file. */ struct rbu_file { sqlite3_file base; /* sqlite3_file methods */ @@ -170828,6 +187201,7 @@ sqlite3_file *pReal; /* Underlying file handle */ rbu_vfs *pRbuVfs; /* Pointer to the rbu_vfs object */ sqlite3rbu *pRbu; /* Pointer to rbu object (rbu target only) */ + i64 sz; /* Size of file in bytes (temp only) */ int openFlags; /* Flags this file was opened with */ u32 iCookie; /* Cookie value for main db files */ @@ -170841,6 +187215,7 @@ const char *zWal; /* Wal filename for this main db file */ rbu_file *pWalFd; /* Wal file descriptor for this main db */ rbu_file *pMainNext; /* Next MAIN_DB file */ + rbu_file *pMainRbuNext; /* Next MAIN_DB file with pRbu!=0 */ }; /* @@ -170890,6 +187265,7 @@ return v; } +#if RBU_ENABLE_DELTA_CKSUM /* ** Compute a 32-bit checksum on the N-byte buffer. Return the result. */ @@ -170924,6 +187300,7 @@ } return sum3; } +#endif /* ** Apply a delta. @@ -170954,7 +187331,7 @@ ){ unsigned int limit; unsigned int total = 0; -#ifndef FOSSIL_OMIT_DELTA_CKSUM_TEST +#if RBU_ENABLE_DELTA_CKSUM char *zOrigOut = zOut; #endif @@ -171009,7 +187386,7 @@ case ';': { zDelta++; lenDelta--; zOut[0] = 0; -#ifndef FOSSIL_OMIT_DELTA_CKSUM_TEST +#if RBU_ENABLE_DELTA_CKSUM if( cnt!=rbuDeltaChecksum(zOrigOut, total) ){ /* ERROR: bad checksum */ return -1; @@ -172217,7 +188594,7 @@ int iCid = sqlite3_column_int(pXInfo, 1); int bDesc = sqlite3_column_int(pXInfo, 3); const char *zCollate = (const char*)sqlite3_column_text(pXInfo, 4); - zCols = rbuMPrintf(p, "%z%sc%d %s COLLATE %s", zCols, zComma, + zCols = rbuMPrintf(p, "%z%sc%d %s COLLATE %Q", zCols, zComma, iCid, pIter->azTblType[iCid], zCollate ); zPk = rbuMPrintf(p, "%z%sc%d%s", zPk, zComma, iCid, bDesc?" DESC":""); @@ -172278,7 +188655,7 @@ ** "PRIMARY KEY" to the imposter table column declaration. */ zPk = "PRIMARY KEY "; } - zSql = rbuMPrintf(p, "%z%s\"%w\" %s %sCOLLATE %s%s", + zSql = rbuMPrintf(p, "%z%s\"%w\" %s %sCOLLATE %Q%s", zSql, zComma, zCol, pIter->azTblType[iCol], zPk, zColl, (pIter->abNotNull[iCol] ? " NOT NULL" : "") ); @@ -172679,6 +189056,7 @@ static void rbuFreeState(RbuState *p){ if( p ){ sqlite3_free(p->zTbl); + sqlite3_free(p->zDataTbl); sqlite3_free(p->zIdx); sqlite3_free(p); } @@ -172749,6 +189127,10 @@ pRet->nPhaseOneStep = sqlite3_column_int64(pStmt, 1); break; + case RBU_STATE_DATATBL: + pRet->zDataTbl = rbuStrndup((char*)sqlite3_column_text(pStmt, 1), &rc); + break; + default: rc = SQLITE_CORRUPT; break; @@ -173523,7 +189905,8 @@ "(%d, %lld), " "(%d, %lld), " "(%d, %lld), " - "(%d, %lld) ", + "(%d, %lld), " + "(%d, %Q) ", p->zStateDb, RBU_STATE_STAGE, eStage, RBU_STATE_TBL, p->objiter.zTbl, @@ -173533,7 +189916,8 @@ RBU_STATE_CKPT, p->iWalCksum, RBU_STATE_COOKIE, (i64)pFd->iCookie, RBU_STATE_OALSZ, p->iOalSz, - RBU_STATE_PHASEONESTEP, p->nPhaseOneStep + RBU_STATE_PHASEONESTEP, p->nPhaseOneStep, + RBU_STATE_DATATBL, p->objiter.zDataTbl ) ); assert( pInsert==0 || rc==SQLITE_OK ); @@ -173789,7 +190173,8 @@ while( rc==SQLITE_OK && pIter->zTbl && (pIter->bCleanup || rbuStrCompare(pIter->zIdx, pState->zIdx) - || rbuStrCompare(pIter->zTbl, pState->zTbl) + || (pState->zDataTbl==0 && rbuStrCompare(pIter->zTbl, pState->zTbl)) + || (pState->zDataTbl && rbuStrCompare(pIter->zDataTbl, pState->zDataTbl)) )){ rc = rbuObjIterNext(p, pIter); } @@ -173841,6 +190226,7 @@ sqlite3_vfs *pVfs = sqlite3_vfs_find(zRnd); assert( pVfs ); p->zVfsName = pVfs->zName; + ((rbu_vfs*)pVfs)->pRbu = p; } } @@ -174213,6 +190599,7 @@ /* Close the open database handle and VFS object. */ sqlite3_close(p->dbRbu); sqlite3_close(p->dbMain); + assert( p->szTemp==0 ); rbuDeleteVfs(p); sqlite3_free(p->aBuf); sqlite3_free(p->aFrame); @@ -174400,6 +190787,7 @@ */ static void rbuUnlockShm(rbu_file *p){ + assert( p->openFlags & SQLITE_OPEN_MAIN_DB ); if( p->pRbu ){ int (*xShmLock)(sqlite3_file*,int,int,int) = p->pReal->pMethods->xShmLock; int i; @@ -174413,6 +190801,81 @@ } /* +*/ +static int rbuUpdateTempSize(rbu_file *pFd, sqlite3_int64 nNew){ + sqlite3rbu *pRbu = pFd->pRbu; + i64 nDiff = nNew - pFd->sz; + pRbu->szTemp += nDiff; + pFd->sz = nNew; + assert( pRbu->szTemp>=0 ); + if( pRbu->szTempLimit && pRbu->szTemp>pRbu->szTempLimit ) return SQLITE_FULL; + return SQLITE_OK; +} + +/* +** Add an item to the main-db lists, if it is not already present. +** +** There are two main-db lists. One for all file descriptors, and one +** for all file descriptors with rbu_file.pDb!=0. If the argument has +** rbu_file.pDb!=0, then it is assumed to already be present on the +** main list and is only added to the pDb!=0 list. +*/ +static void rbuMainlistAdd(rbu_file *p){ + rbu_vfs *pRbuVfs = p->pRbuVfs; + rbu_file *pIter; + assert( (p->openFlags & SQLITE_OPEN_MAIN_DB) ); + sqlite3_mutex_enter(pRbuVfs->mutex); + if( p->pRbu==0 ){ + for(pIter=pRbuVfs->pMain; pIter; pIter=pIter->pMainNext); + p->pMainNext = pRbuVfs->pMain; + pRbuVfs->pMain = p; + }else{ + for(pIter=pRbuVfs->pMainRbu; pIter && pIter!=p; pIter=pIter->pMainRbuNext){} + if( pIter==0 ){ + p->pMainRbuNext = pRbuVfs->pMainRbu; + pRbuVfs->pMainRbu = p; + } + } + sqlite3_mutex_leave(pRbuVfs->mutex); +} + +/* +** Remove an item from the main-db lists. +*/ +static void rbuMainlistRemove(rbu_file *p){ + rbu_file **pp; + sqlite3_mutex_enter(p->pRbuVfs->mutex); + for(pp=&p->pRbuVfs->pMain; *pp && *pp!=p; pp=&((*pp)->pMainNext)){} + if( *pp ) *pp = p->pMainNext; + p->pMainNext = 0; + for(pp=&p->pRbuVfs->pMainRbu; *pp && *pp!=p; pp=&((*pp)->pMainRbuNext)){} + if( *pp ) *pp = p->pMainRbuNext; + p->pMainRbuNext = 0; + sqlite3_mutex_leave(p->pRbuVfs->mutex); +} + +/* +** Given that zWal points to a buffer containing a wal file name passed to +** either the xOpen() or xAccess() VFS method, search the main-db list for +** a file-handle opened by the same database connection on the corresponding +** database file. +** +** If parameter bRbu is true, only search for file-descriptors with +** rbu_file.pDb!=0. +*/ +static rbu_file *rbuFindMaindb(rbu_vfs *pRbuVfs, const char *zWal, int bRbu){ + rbu_file *pDb; + sqlite3_mutex_enter(pRbuVfs->mutex); + if( bRbu ){ + for(pDb=pRbuVfs->pMainRbu; pDb && pDb->zWal!=zWal; pDb=pDb->pMainRbuNext){} + }else{ + for(pDb=pRbuVfs->pMain; pDb && pDb->zWal!=zWal; pDb=pDb->pMainNext){} + } + sqlite3_mutex_leave(pRbuVfs->mutex); + return pDb; +} + +/* ** Close an rbu file. */ static int rbuVfsClose(sqlite3_file *pFile){ @@ -174429,14 +190892,14 @@ sqlite3_free(p->zDel); if( p->openFlags & SQLITE_OPEN_MAIN_DB ){ - rbu_file **pp; - sqlite3_mutex_enter(p->pRbuVfs->mutex); - for(pp=&p->pRbuVfs->pMain; *pp!=p; pp=&((*pp)->pMainNext)); - *pp = p->pMainNext; - sqlite3_mutex_leave(p->pRbuVfs->mutex); + rbuMainlistRemove(p); rbuUnlockShm(p); p->pReal->pMethods->xShmUnmap(p->pReal, 0); } + else if( (p->openFlags & SQLITE_OPEN_DELETEONCLOSE) && p->pRbu ){ + rbuUpdateTempSize(p, 0); + } + assert( p->pMainNext==0 && p->pRbuVfs->pMain!=p ); /* Close the underlying file handle */ rc = p->pReal->pMethods->xClose(p->pReal); @@ -174554,11 +191017,19 @@ assert( p->openFlags & SQLITE_OPEN_MAIN_DB ); rc = rbuCaptureDbWrite(p->pRbu, iOfst); }else{ - if( pRbu && pRbu->eStage==RBU_STAGE_OAL - && (p->openFlags & SQLITE_OPEN_WAL) - && iOfst>=pRbu->iOalSz - ){ - pRbu->iOalSz = iAmt + iOfst; + if( pRbu ){ + if( pRbu->eStage==RBU_STAGE_OAL + && (p->openFlags & SQLITE_OPEN_WAL) + && iOfst>=pRbu->iOalSz + ){ + pRbu->iOalSz = iAmt + iOfst; + }else if( p->openFlags & SQLITE_OPEN_DELETEONCLOSE ){ + i64 szNew = iAmt+iOfst; + if( szNew>p->sz ){ + rc = rbuUpdateTempSize(p, szNew); + if( rc!=SQLITE_OK ) return rc; + } + } } rc = p->pReal->pMethods->xWrite(p->pReal, zBuf, iAmt, iOfst); if( rc==SQLITE_OK && iOfst==0 && (p->openFlags & SQLITE_OPEN_MAIN_DB) ){ @@ -174577,6 +191048,10 @@ */ static int rbuVfsTruncate(sqlite3_file *pFile, sqlite_int64 size){ rbu_file *p = (rbu_file*)pFile; + if( (p->openFlags & SQLITE_OPEN_DELETEONCLOSE) && p->pRbu ){ + int rc = rbuUpdateTempSize(p, size); + if( rc!=SQLITE_OK ) return rc; + } return p->pReal->pMethods->xTruncate(p->pReal, size); } @@ -174683,6 +191158,9 @@ }else if( rc==SQLITE_NOTFOUND ){ pRbu->pTargetFd = p; p->pRbu = pRbu; + if( p->openFlags & SQLITE_OPEN_MAIN_DB ){ + rbuMainlistAdd(p); + } if( p->pWalFd ) p->pWalFd->pRbu = pRbu; rc = SQLITE_OK; } @@ -174844,20 +191322,6 @@ return rc; } -/* -** Given that zWal points to a buffer containing a wal file name passed to -** either the xOpen() or xAccess() VFS method, return a pointer to the -** file-handle opened by the same database connection on the corresponding -** database file. -*/ -static rbu_file *rbuFindMaindb(rbu_vfs *pRbuVfs, const char *zWal){ - rbu_file *pDb; - sqlite3_mutex_enter(pRbuVfs->mutex); - for(pDb=pRbuVfs->pMain; pDb && pDb->zWal!=zWal; pDb=pDb->pMainNext){} - sqlite3_mutex_leave(pRbuVfs->mutex); - return pDb; -} - /* ** A main database named zName has just been opened. The following ** function returns a pointer to a buffer owned by SQLite that contains @@ -174936,7 +191400,7 @@ pFd->zWal = rbuMainToWal(zName, flags); } else if( flags & SQLITE_OPEN_WAL ){ - rbu_file *pDb = rbuFindMaindb(pRbuVfs, zName); + rbu_file *pDb = rbuFindMaindb(pRbuVfs, zName, 0); if( pDb ){ if( pDb->pRbu && pDb->pRbu->eStage==RBU_STAGE_OAL ){ /* This call is to open a *-wal file. Intead, open the *-oal. This @@ -174966,6 +191430,8 @@ pDb->pWalFd = pFd; } } + }else{ + pFd->pRbu = pRbuVfs->pRbu; } if( oflags & SQLITE_OPEN_MAIN_DB @@ -174986,10 +191452,7 @@ ** mutex protected linked list of all such files. */ pFile->pMethods = &rbuvfs_io_methods; if( flags & SQLITE_OPEN_MAIN_DB ){ - sqlite3_mutex_enter(pRbuVfs->mutex); - pFd->pMainNext = pRbuVfs->pMain; - pRbuVfs->pMain = pFd; - sqlite3_mutex_leave(pRbuVfs->mutex); + rbuMainlistAdd(pFd); } }else{ sqlite3_free(pFd->zDel); @@ -175037,12 +191500,14 @@ ** file opened instead. */ if( rc==SQLITE_OK && flags==SQLITE_ACCESS_EXISTS ){ - rbu_file *pDb = rbuFindMaindb(pRbuVfs, zPath); + rbu_file *pDb = rbuFindMaindb(pRbuVfs, zPath, 1); if( pDb && pDb->pRbu && pDb->pRbu->eStage==RBU_STAGE_OAL ){ if( *pResOut ){ rc = SQLITE_CANTOPEN; }else{ - *pResOut = 1; + sqlite3_int64 sz = 0; + rc = rbuVfsFileSize(&pDb->base, &sz); + *pResOut = (sz>0); } } } @@ -175231,7 +191696,21 @@ return rc; } +/* +** Configure the aggregate temp file size limit for this RBU handle. +*/ +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size_limit(sqlite3rbu *pRbu, sqlite3_int64 n){ + if( n>=0 ){ + pRbu->szTempLimit = n; + } + return pRbu->szTempLimit; +} +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size(sqlite3rbu *pRbu){ + return pRbu->szTemp; +} + + /**************************************************************************/ #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_RBU) */ @@ -175434,8 +191913,6 @@ static int statBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ int i; - pIdxInfo->estimatedCost = 1.0e6; /* Initial cost estimate */ - /* Look for a valid schema=? constraint. If found, change the idxNum to ** 1 and request the value of that constraint be sent to xFilter. And ** lower the cost estimate to encourage the constrained version to be @@ -175442,9 +191919,9 @@ ** used. */ for(i=0; inConstraint; i++){ - if( pIdxInfo->aConstraint[i].usable==0 ) continue; + if( pIdxInfo->aConstraint[i].iColumn!=10 ) continue; + if( pIdxInfo->aConstraint[i].usable==0 ) return SQLITE_CONSTRAINT; if( pIdxInfo->aConstraint[i].op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue; - if( pIdxInfo->aConstraint[i].iColumn!=10 ) continue; pIdxInfo->idxNum = 1; pIdxInfo->estimatedCost = 1.0; pIdxInfo->aConstraintUsage[i].argvIndex = 1; @@ -175494,7 +191971,7 @@ return SQLITE_OK; } -static void statClearPage(StatPage *p){ +static void statClearCells(StatPage *p){ int i; if( p->aCell ){ for(i=0; inCell; i++){ @@ -175502,6 +191979,12 @@ } sqlite3_free(p->aCell); } + p->nCell = 0; + p->aCell = 0; +} + +static void statClearPage(StatPage *p){ + statClearCells(p); sqlite3PagerUnref(p->pPg); sqlite3_free(p->zPath); memset(p, 0, sizeof(StatPage)); @@ -175564,22 +192047,33 @@ u8 *aHdr = &aData[p->iPgno==1 ? 100 : 0]; p->flags = aHdr[0]; + if( p->flags==0x0A || p->flags==0x0D ){ + isLeaf = 1; + nHdr = 8; + }else if( p->flags==0x05 || p->flags==0x02 ){ + isLeaf = 0; + nHdr = 12; + }else{ + goto statPageIsCorrupt; + } + if( p->iPgno==1 ) nHdr += 100; p->nCell = get2byte(&aHdr[3]); p->nMxPayload = 0; + szPage = sqlite3BtreeGetPageSize(pBt); - isLeaf = (p->flags==0x0A || p->flags==0x0D); - nHdr = 12 - isLeaf*4 + (p->iPgno==1)*100; - nUnused = get2byte(&aHdr[5]) - nHdr - 2*p->nCell; nUnused += (int)aHdr[7]; iOff = get2byte(&aHdr[1]); while( iOff ){ + int iNext; + if( iOff>=szPage ) goto statPageIsCorrupt; nUnused += get2byte(&aData[iOff+2]); - iOff = get2byte(&aData[iOff]); + iNext = get2byte(&aData[iOff]); + if( iNext0 ) goto statPageIsCorrupt; + iOff = iNext; } p->nUnused = nUnused; p->iRightChildPg = isLeaf ? 0 : sqlite3Get4byte(&aHdr[8]); - szPage = sqlite3BtreeGetPageSize(pBt); if( p->nCell ){ int i; /* Used to iterate through cells */ @@ -175596,6 +192090,7 @@ StatCell *pCell = &p->aCell[i]; iOff = get2byte(&aData[nHdr+i*2]); + if( iOff=szPage ) goto statPageIsCorrupt; if( !isLeaf ){ pCell->iChildPg = sqlite3Get4byte(&aData[iOff]); iOff += 4; @@ -175612,13 +192107,14 @@ } if( nPayload>(u32)p->nMxPayload ) p->nMxPayload = nPayload; getLocalPayload(nUsable, p->flags, nPayload, &nLocal); + if( nLocal<0 ) goto statPageIsCorrupt; pCell->nLocal = nLocal; - assert( nLocal>=0 ); assert( nPayload>=(u32)nLocal ); assert( nLocal<=(nUsable-35) ); if( nPayload>(u32)nLocal ){ int j; int nOvfl = ((nPayload - nLocal) + nUsable-4 - 1) / (nUsable - 4); + if( iOff+nLocal>nUsable ) goto statPageIsCorrupt; pCell->nLastOvfl = (nPayload-nLocal) - (nOvfl-1) * (nUsable-4); pCell->nOvfl = nOvfl; pCell->aOvfl = sqlite3_malloc64(sizeof(u32)*nOvfl); @@ -175642,6 +192138,11 @@ } return SQLITE_OK; + +statPageIsCorrupt: + p->flags = 0; + statClearCells(p); + return SQLITE_OK; } /* @@ -175664,7 +192165,7 @@ */ fd = sqlite3PagerFile(pPager); x[0] = pCsr->iPageno; - if( fd->pMethods!=0 && sqlite3OsFileControl(fd, 230440, &x)==SQLITE_OK ){ + if( sqlite3OsFileControl(fd, 230440, &x)==SQLITE_OK ){ pCsr->iOffset = x[0]; pCsr->szPage = (int)x[1]; } @@ -175937,6 +192438,7 @@ 0, /* xSavepoint */ 0, /* xRelease */ 0, /* xRollbackTo */ + 0 /* xShadowName */ }; return sqlite3_create_module(db, "dbstat", &dbstat_module, 0); } @@ -175945,6 +192447,424 @@ #endif /* SQLITE_ENABLE_DBSTAT_VTAB */ /************** End of dbstat.c **********************************************/ +/************** Begin file dbpage.c ******************************************/ +/* +** 2017-10-11 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains an implementation of the "sqlite_dbpage" virtual table. +** +** The sqlite_dbpage virtual table is used to read or write whole raw +** pages of the database file. The pager interface is used so that +** uncommitted changes and changes recorded in the WAL file are correctly +** retrieved. +** +** Usage example: +** +** SELECT data FROM sqlite_dbpage('aux1') WHERE pgno=123; +** +** This is an eponymous virtual table so it does not need to be created before +** use. The optional argument to the sqlite_dbpage() table name is the +** schema for the database file that is to be read. The default schema is +** "main". +** +** The data field of sqlite_dbpage table can be updated. The new +** value must be a BLOB which is the correct page size, otherwise the +** update fails. Rows may not be deleted or inserted. +*/ + +/* #include "sqliteInt.h" ** Requires access to internal data structures ** */ +#if (defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST)) \ + && !defined(SQLITE_OMIT_VIRTUALTABLE) + +typedef struct DbpageTable DbpageTable; +typedef struct DbpageCursor DbpageCursor; + +struct DbpageCursor { + sqlite3_vtab_cursor base; /* Base class. Must be first */ + int pgno; /* Current page number */ + int mxPgno; /* Last page to visit on this scan */ + Pager *pPager; /* Pager being read/written */ + DbPage *pPage1; /* Page 1 of the database */ + int iDb; /* Index of database to analyze */ + int szPage; /* Size of each page in bytes */ +}; + +struct DbpageTable { + sqlite3_vtab base; /* Base class. Must be first */ + sqlite3 *db; /* The database */ +}; + +/* Columns */ +#define DBPAGE_COLUMN_PGNO 0 +#define DBPAGE_COLUMN_DATA 1 +#define DBPAGE_COLUMN_SCHEMA 2 + + + +/* +** Connect to or create a dbpagevfs virtual table. +*/ +static int dbpageConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + DbpageTable *pTab = 0; + int rc = SQLITE_OK; + + rc = sqlite3_declare_vtab(db, + "CREATE TABLE x(pgno INTEGER PRIMARY KEY, data BLOB, schema HIDDEN)"); + if( rc==SQLITE_OK ){ + pTab = (DbpageTable *)sqlite3_malloc64(sizeof(DbpageTable)); + if( pTab==0 ) rc = SQLITE_NOMEM_BKPT; + } + + assert( rc==SQLITE_OK || pTab==0 ); + if( rc==SQLITE_OK ){ + memset(pTab, 0, sizeof(DbpageTable)); + pTab->db = db; + } + + *ppVtab = (sqlite3_vtab*)pTab; + return rc; +} + +/* +** Disconnect from or destroy a dbpagevfs virtual table. +*/ +static int dbpageDisconnect(sqlite3_vtab *pVtab){ + sqlite3_free(pVtab); + return SQLITE_OK; +} + +/* +** idxNum: +** +** 0 schema=main, full table scan +** 1 schema=main, pgno=?1 +** 2 schema=?1, full table scan +** 3 schema=?1, pgno=?2 +*/ +static int dbpageBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ + int i; + int iPlan = 0; + + /* If there is a schema= constraint, it must be honored. Report a + ** ridiculously large estimated cost if the schema= constraint is + ** unavailable + */ + for(i=0; inConstraint; i++){ + struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[i]; + if( p->iColumn!=DBPAGE_COLUMN_SCHEMA ) continue; + if( p->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue; + if( !p->usable ){ + /* No solution. */ + return SQLITE_CONSTRAINT; + } + iPlan = 2; + pIdxInfo->aConstraintUsage[i].argvIndex = 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + break; + } + + /* If we reach this point, it means that either there is no schema= + ** constraint (in which case we use the "main" schema) or else the + ** schema constraint was accepted. Lower the estimated cost accordingly + */ + pIdxInfo->estimatedCost = 1.0e6; + + /* Check for constraints against pgno */ + for(i=0; inConstraint; i++){ + struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[i]; + if( p->usable && p->iColumn<=0 && p->op==SQLITE_INDEX_CONSTRAINT_EQ ){ + pIdxInfo->estimatedRows = 1; + pIdxInfo->idxFlags = SQLITE_INDEX_SCAN_UNIQUE; + pIdxInfo->estimatedCost = 1.0; + pIdxInfo->aConstraintUsage[i].argvIndex = iPlan ? 2 : 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + iPlan |= 1; + break; + } + } + pIdxInfo->idxNum = iPlan; + + if( pIdxInfo->nOrderBy>=1 + && pIdxInfo->aOrderBy[0].iColumn<=0 + && pIdxInfo->aOrderBy[0].desc==0 + ){ + pIdxInfo->orderByConsumed = 1; + } + return SQLITE_OK; +} + +/* +** Open a new dbpagevfs cursor. +*/ +static int dbpageOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){ + DbpageCursor *pCsr; + + pCsr = (DbpageCursor *)sqlite3_malloc64(sizeof(DbpageCursor)); + if( pCsr==0 ){ + return SQLITE_NOMEM_BKPT; + }else{ + memset(pCsr, 0, sizeof(DbpageCursor)); + pCsr->base.pVtab = pVTab; + pCsr->pgno = -1; + } + + *ppCursor = (sqlite3_vtab_cursor *)pCsr; + return SQLITE_OK; +} + +/* +** Close a dbpagevfs cursor. +*/ +static int dbpageClose(sqlite3_vtab_cursor *pCursor){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + if( pCsr->pPage1 ) sqlite3PagerUnrefPageOne(pCsr->pPage1); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** Move a dbpagevfs cursor to the next entry in the file. +*/ +static int dbpageNext(sqlite3_vtab_cursor *pCursor){ + int rc = SQLITE_OK; + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + pCsr->pgno++; + return rc; +} + +static int dbpageEof(sqlite3_vtab_cursor *pCursor){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + return pCsr->pgno > pCsr->mxPgno; +} + +/* +** idxNum: +** +** 0 schema=main, full table scan +** 1 schema=main, pgno=?1 +** 2 schema=?1, full table scan +** 3 schema=?1, pgno=?2 +** +** idxStr is not used +*/ +static int dbpageFilter( + sqlite3_vtab_cursor *pCursor, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + DbpageTable *pTab = (DbpageTable *)pCursor->pVtab; + int rc; + sqlite3 *db = pTab->db; + Btree *pBt; + + /* Default setting is no rows of result */ + pCsr->pgno = 1; + pCsr->mxPgno = 0; + + if( idxNum & 2 ){ + const char *zSchema; + assert( argc>=1 ); + zSchema = (const char*)sqlite3_value_text(argv[0]); + pCsr->iDb = sqlite3FindDbName(db, zSchema); + if( pCsr->iDb<0 ) return SQLITE_OK; + }else{ + pCsr->iDb = 0; + } + pBt = db->aDb[pCsr->iDb].pBt; + if( pBt==0 ) return SQLITE_OK; + pCsr->pPager = sqlite3BtreePager(pBt); + pCsr->szPage = sqlite3BtreeGetPageSize(pBt); + pCsr->mxPgno = sqlite3BtreeLastPage(pBt); + if( idxNum & 1 ){ + assert( argc>(idxNum>>1) ); + pCsr->pgno = sqlite3_value_int(argv[idxNum>>1]); + if( pCsr->pgno<1 || pCsr->pgno>pCsr->mxPgno ){ + pCsr->pgno = 1; + pCsr->mxPgno = 0; + }else{ + pCsr->mxPgno = pCsr->pgno; + } + }else{ + assert( pCsr->pgno==1 ); + } + if( pCsr->pPage1 ) sqlite3PagerUnrefPageOne(pCsr->pPage1); + rc = sqlite3PagerGet(pCsr->pPager, 1, &pCsr->pPage1, 0); + return rc; +} + +static int dbpageColumn( + sqlite3_vtab_cursor *pCursor, + sqlite3_context *ctx, + int i +){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + int rc = SQLITE_OK; + switch( i ){ + case 0: { /* pgno */ + sqlite3_result_int(ctx, pCsr->pgno); + break; + } + case 1: { /* data */ + DbPage *pDbPage = 0; + rc = sqlite3PagerGet(pCsr->pPager, pCsr->pgno, (DbPage**)&pDbPage, 0); + if( rc==SQLITE_OK ){ + sqlite3_result_blob(ctx, sqlite3PagerGetData(pDbPage), pCsr->szPage, + SQLITE_TRANSIENT); + } + sqlite3PagerUnref(pDbPage); + break; + } + default: { /* schema */ + sqlite3 *db = sqlite3_context_db_handle(ctx); + sqlite3_result_text(ctx, db->aDb[pCsr->iDb].zDbSName, -1, SQLITE_STATIC); + break; + } + } + return SQLITE_OK; +} + +static int dbpageRowid(sqlite3_vtab_cursor *pCursor, sqlite_int64 *pRowid){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + *pRowid = pCsr->pgno; + return SQLITE_OK; +} + +static int dbpageUpdate( + sqlite3_vtab *pVtab, + int argc, + sqlite3_value **argv, + sqlite_int64 *pRowid +){ + DbpageTable *pTab = (DbpageTable *)pVtab; + Pgno pgno; + DbPage *pDbPage = 0; + int rc = SQLITE_OK; + char *zErr = 0; + const char *zSchema; + int iDb; + Btree *pBt; + Pager *pPager; + int szPage; + + if( pTab->db->flags & SQLITE_Defensive ){ + zErr = "read-only"; + goto update_fail; + } + if( argc==1 ){ + zErr = "cannot delete"; + goto update_fail; + } + pgno = sqlite3_value_int(argv[0]); + if( (Pgno)sqlite3_value_int(argv[1])!=pgno ){ + zErr = "cannot insert"; + goto update_fail; + } + zSchema = (const char*)sqlite3_value_text(argv[4]); + iDb = zSchema ? sqlite3FindDbName(pTab->db, zSchema) : -1; + if( iDb<0 ){ + zErr = "no such schema"; + goto update_fail; + } + pBt = pTab->db->aDb[iDb].pBt; + if( pgno<1 || pBt==0 || pgno>(int)sqlite3BtreeLastPage(pBt) ){ + zErr = "bad page number"; + goto update_fail; + } + szPage = sqlite3BtreeGetPageSize(pBt); + if( sqlite3_value_type(argv[3])!=SQLITE_BLOB + || sqlite3_value_bytes(argv[3])!=szPage + ){ + zErr = "bad page value"; + goto update_fail; + } + pPager = sqlite3BtreePager(pBt); + rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pDbPage, 0); + if( rc==SQLITE_OK ){ + rc = sqlite3PagerWrite(pDbPage); + if( rc==SQLITE_OK ){ + memcpy(sqlite3PagerGetData(pDbPage), + sqlite3_value_blob(argv[3]), + szPage); + } + } + sqlite3PagerUnref(pDbPage); + return rc; + +update_fail: + sqlite3_free(pVtab->zErrMsg); + pVtab->zErrMsg = sqlite3_mprintf("%s", zErr); + return SQLITE_ERROR; +} + +/* Since we do not know in advance which database files will be +** written by the sqlite_dbpage virtual table, start a write transaction +** on them all. +*/ +static int dbpageBegin(sqlite3_vtab *pVtab){ + DbpageTable *pTab = (DbpageTable *)pVtab; + sqlite3 *db = pTab->db; + int i; + for(i=0; inDb; i++){ + Btree *pBt = db->aDb[i].pBt; + if( pBt ) sqlite3BtreeBeginTrans(pBt, 1, 0); + } + return SQLITE_OK; +} + + +/* +** Invoke this routine to register the "dbpage" virtual table module +*/ +SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3 *db){ + static sqlite3_module dbpage_module = { + 0, /* iVersion */ + dbpageConnect, /* xCreate */ + dbpageConnect, /* xConnect */ + dbpageBestIndex, /* xBestIndex */ + dbpageDisconnect, /* xDisconnect */ + dbpageDisconnect, /* xDestroy */ + dbpageOpen, /* xOpen - open a cursor */ + dbpageClose, /* xClose - close a cursor */ + dbpageFilter, /* xFilter - configure scan constraints */ + dbpageNext, /* xNext - advance a cursor */ + dbpageEof, /* xEof - check for end of scan */ + dbpageColumn, /* xColumn - read data */ + dbpageRowid, /* xRowid - read data */ + dbpageUpdate, /* xUpdate */ + dbpageBegin, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ + 0 /* xShadowName */ + }; + return sqlite3_create_module(db, "sqlite_dbpage", &dbpage_module, 0); +} +#elif defined(SQLITE_ENABLE_DBPAGE_VTAB) +SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3 *db){ return SQLITE_OK; } +#endif /* SQLITE_ENABLE_DBSTAT_VTAB */ + +/************** End of dbpage.c **********************************************/ /************** Begin file sqlite3session.c **********************************/ #if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK) @@ -175973,6 +192893,8 @@ # endif #endif +static int sessions_strm_chunk_size = SESSIONS_STRM_CHUNK_SIZE; + typedef struct SessionHook SessionHook; struct SessionHook { void *pCtx; @@ -175994,6 +192916,7 @@ int rc; /* Non-zero if an error has occurred */ void *pFilterCtx; /* First argument to pass to xTableFilter */ int (*xTableFilter)(void *pCtx, const char *zTab); + sqlite3_value *pZeroBlob; /* Value containing X'' */ sqlite3_session *pNext; /* Next session object on same db. */ SessionTable *pTable; /* List of attached tables */ SessionHook hook; /* APIs to grab new and old data with */ @@ -176015,7 +192938,7 @@ ** sqlite3changeset_start_strm()). */ struct SessionInput { - int bNoDiscard; /* If true, discard no data */ + int bNoDiscard; /* If true, do not discard in InputBuffer() */ int iCurrent; /* Offset in aData[] of current change */ int iNext; /* Offset in aData[] of next change */ u8 *aData; /* Pointer to buffer containing changeset */ @@ -176034,6 +192957,7 @@ SessionInput in; /* Input buffer or stream */ SessionBuffer tblhdr; /* Buffer to hold apValue/zTab/abPK/ */ int bPatchset; /* True if this is a patchset */ + int bInvert; /* True to invert changeset */ int rc; /* Iterator error code */ sqlite3_stmt *pConflict; /* Points to conflicting row, if any */ char *zTab; /* Current table */ @@ -176061,6 +192985,7 @@ SessionTable *pNext; char *zName; /* Local name of table */ int nCol; /* Number of columns in table zName */ + int bStat1; /* True if this is sqlite_stat1 */ const char **azCol; /* Column names */ u8 *abPK; /* Array of primary key flags */ int nEntry; /* Total number of entries in hash table */ @@ -176178,8 +193103,8 @@ ** statement. ** ** For a DELETE change, all fields within the record except those associated -** with PRIMARY KEY columns are set to "undefined". The PRIMARY KEY fields -** contain the values identifying the row to delete. +** with PRIMARY KEY columns are omitted. The PRIMARY KEY fields contain the +** values identifying the row to delete. ** ** For an UPDATE change, all fields except those associated with PRIMARY KEY ** columns and columns that are modified by the UPDATE are set to "undefined". @@ -176189,6 +193114,42 @@ ** The records associated with INSERT changes are in the same format as for ** changesets. It is not possible for a record associated with an INSERT ** change to contain a field set to "undefined". +** +** REBASE BLOB FORMAT: +** +** A rebase blob may be output by sqlite3changeset_apply_v2() and its +** streaming equivalent for use with the sqlite3_rebaser APIs to rebase +** existing changesets. A rebase blob contains one entry for each conflict +** resolved using either the OMIT or REPLACE strategies within the apply_v2() +** call. +** +** The format used for a rebase blob is very similar to that used for +** changesets. All entries related to a single table are grouped together. +** +** Each group of entries begins with a table header in changeset format: +** +** 1 byte: Constant 0x54 (capital 'T') +** Varint: Number of columns in the table. +** nCol bytes: 0x01 for PK columns, 0x00 otherwise. +** N bytes: Unqualified table name (encoded using UTF-8). Nul-terminated. +** +** Followed by one or more entries associated with the table. +** +** 1 byte: Either SQLITE_INSERT (0x12), DELETE (0x09). +** 1 byte: Flag. 0x01 for REPLACE, 0x00 for OMIT. +** record: (in the record format defined above). +** +** In a rebase blob, the first field is set to SQLITE_INSERT if the change +** that caused the conflict was an INSERT or UPDATE, or to SQLITE_DELETE if +** it was a DELETE. The second field is set to 0x01 if the conflict +** resolution strategy was REPLACE, or 0x00 if it was OMIT. +** +** If the change that caused the conflict was a DELETE, then the single +** record is a copy of the old.* record from the original changeset. If it +** was an INSERT, then the single record is a copy of the new.* record. If +** the conflicting change was an UPDATE, then the single record is a copy +** of the new.* record with the PK fields filled in based on the original +** old.* record. */ /* @@ -176444,6 +193405,7 @@ h = sessionHashAppendBlob(h, n, z); }else{ assert( eType==SQLITE_NULL ); + assert( pTab->bStat1==0 || i!=1 ); *pbNullPK = 1; } } @@ -176461,7 +193423,7 @@ static int sessionSerialLen(u8 *a){ int e = *a; int n; - if( e==0 ) return 1; + if( e==0 || e==0xFF ) return 1; if( e==SQLITE_NULL ) return 1; if( e==SQLITE_INTEGER || e==SQLITE_FLOAT ) return 9; return sessionVarintGet(&a[1], &n) + 1 + n; @@ -176541,7 +193503,7 @@ int n1 = sessionSerialLen(a1); int n2 = sessionSerialLen(a2); - if( pTab->abPK[iCol] && (n1!=n2 || memcmp(a1, a2, n1)) ){ + if( n1!=n2 || memcmp(a1, a2, n1) ){ return 0; } a1 += n1; @@ -176784,9 +193746,8 @@ }else{ z = sqlite3_value_blob(pVal); } - if( memcmp(a, z, n) ) return 0; + if( n>0 && memcmp(a, z, n) ) return 0; a += n; - break; } } } @@ -176842,9 +193803,7 @@ /* ** This function queries the database for the names of the columns of table -** zThis, in schema zDb. It is expected that the table has nCol columns. If -** not, SQLITE_SCHEMA is returned and none of the output variables are -** populated. +** zThis, in schema zDb. ** ** Otherwise, if they are not NULL, variable *pnCol is set to the number ** of columns in the database table and variable *pzTab is set to point to a @@ -176865,9 +193824,7 @@ ** *pabPK = {1, 0, 0, 1} ** ** All returned buffers are part of the same single allocation, which must -** be freed using sqlite3_free() by the caller. If pazCol was not NULL, then -** pointer *pazCol should be freed to release all memory. Otherwise, pointer -** *pabPK. It is illegal for both pazCol and pabPK to be NULL. +** be freed using sqlite3_free() by the caller */ static int sessionTableInfo( sqlite3 *db, /* Database connection */ @@ -176892,7 +193849,23 @@ assert( pazCol && pabPK ); nThis = sqlite3Strlen30(zThis); - zPragma = sqlite3_mprintf("PRAGMA '%q'.table_info('%q')", zDb, zThis); + if( nThis==12 && 0==sqlite3_stricmp("sqlite_stat1", zThis) ){ + rc = sqlite3_table_column_metadata(db, zDb, zThis, 0, 0, 0, 0, 0, 0); + if( rc==SQLITE_OK ){ + /* For sqlite_stat1, pretend that (tbl,idx) is the PRIMARY KEY. */ + zPragma = sqlite3_mprintf( + "SELECT 0, 'tbl', '', 0, '', 1 UNION ALL " + "SELECT 1, 'idx', '', 0, '', 2 UNION ALL " + "SELECT 2, 'stat', '', 0, '', 0" + ); + }else if( rc==SQLITE_ERROR ){ + zPragma = sqlite3_mprintf(""); + }else{ + return rc; + } + }else{ + zPragma = sqlite3_mprintf("PRAGMA '%q'.table_info('%q')", zDb, zThis); + } if( !zPragma ) return SQLITE_NOMEM; rc = sqlite3_prepare_v2(db, zPragma, -1, &pStmt, 0); @@ -176984,6 +193957,9 @@ break; } } + if( 0==sqlite3_stricmp("sqlite_stat1", pTab->zName) ){ + pTab->bStat1 = 1; + } } } return (pSession->rc || pTab->abPK==0); @@ -176990,6 +193966,47 @@ } /* +** Versions of the four methods in object SessionHook for use with the +** sqlite_stat1 table. The purpose of this is to substitute a zero-length +** blob each time a NULL value is read from the "idx" column of the +** sqlite_stat1 table. +*/ +typedef struct SessionStat1Ctx SessionStat1Ctx; +struct SessionStat1Ctx { + SessionHook hook; + sqlite3_session *pSession; +}; +static int sessionStat1Old(void *pCtx, int iCol, sqlite3_value **ppVal){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + sqlite3_value *pVal = 0; + int rc = p->hook.xOld(p->hook.pCtx, iCol, &pVal); + if( rc==SQLITE_OK && iCol==1 && sqlite3_value_type(pVal)==SQLITE_NULL ){ + pVal = p->pSession->pZeroBlob; + } + *ppVal = pVal; + return rc; +} +static int sessionStat1New(void *pCtx, int iCol, sqlite3_value **ppVal){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + sqlite3_value *pVal = 0; + int rc = p->hook.xNew(p->hook.pCtx, iCol, &pVal); + if( rc==SQLITE_OK && iCol==1 && sqlite3_value_type(pVal)==SQLITE_NULL ){ + pVal = p->pSession->pZeroBlob; + } + *ppVal = pVal; + return rc; +} +static int sessionStat1Count(void *pCtx){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + return p->hook.xCount(p->hook.pCtx); +} +static int sessionStat1Depth(void *pCtx){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + return p->hook.xDepth(p->hook.pCtx); +} + + +/* ** This function is only called from with a pre-update-hook reporting a ** change on table pTab (attached to session pSession). The type of change ** (UPDATE, INSERT, DELETE) is specified by the first argument. @@ -177005,6 +194022,7 @@ int iHash; int bNull = 0; int rc = SQLITE_OK; + SessionStat1Ctx stat1 = {0}; if( pSession->rc ) return; @@ -177024,6 +194042,25 @@ return; } + if( pTab->bStat1 ){ + stat1.hook = pSession->hook; + stat1.pSession = pSession; + pSession->hook.pCtx = (void*)&stat1; + pSession->hook.xNew = sessionStat1New; + pSession->hook.xOld = sessionStat1Old; + pSession->hook.xCount = sessionStat1Count; + pSession->hook.xDepth = sessionStat1Depth; + if( pSession->pZeroBlob==0 ){ + sqlite3_value *p = sqlite3ValueNew(0); + if( p==0 ){ + rc = SQLITE_NOMEM; + goto error_out; + } + sqlite3ValueSetStr(p, 0, "", 0, SQLITE_STATIC); + pSession->pZeroBlob = p; + } + } + /* Calculate the hash-key for this change. If the primary key of the row ** includes a NULL value, exit early. Such changes are ignored by the ** session module. */ @@ -177113,6 +194150,9 @@ /* If an error has occurred, mark the session object as failed. */ error_out: + if( pTab->bStat1 ){ + pSession->hook = stat1.hook; + } if( rc!=SQLITE_OK ){ pSession->rc = rc; } @@ -177449,7 +194489,6 @@ if( abPK[i] ) bHasPk = 1; } } - } sqlite3_free((char*)azCol); if( bMismatch ){ @@ -177575,6 +194614,7 @@ } } sqlite3_mutex_leave(sqlite3_db_mutex(db)); + sqlite3ValueFree(pSession->pZeroBlob); /* Delete all attached table objects. And the contents of their ** associated hash-tables. */ @@ -177660,12 +194700,12 @@ static int sessionBufferGrow(SessionBuffer *p, int nByte, int *pRc){ if( *pRc==SQLITE_OK && p->nAlloc-p->nBufnAlloc ? p->nAlloc : 128; + i64 nNew = p->nAlloc ? p->nAlloc : 128; do { nNew = nNew*2; - }while( nNew<(p->nBuf+nByte) ); + }while( (nNew-p->nBuf)aBuf, nNew); + aNew = (u8 *)sqlite3_realloc64(p->aBuf, nNew); if( 0==aNew ){ *pRc = SQLITE_NOMEM; }else{ @@ -178042,28 +195082,42 @@ sqlite3_stmt **ppStmt /* OUT: Prepared SELECT statement */ ){ int rc = SQLITE_OK; - int i; - const char *zSep = ""; - SessionBuffer buf = {0, 0, 0}; + char *zSql = 0; + int nSql = -1; - sessionAppendStr(&buf, "SELECT * FROM ", &rc); - sessionAppendIdent(&buf, zDb, &rc); - sessionAppendStr(&buf, ".", &rc); - sessionAppendIdent(&buf, zTab, &rc); - sessionAppendStr(&buf, " WHERE ", &rc); - for(i=0; inNoop - && buf.nBuf>SESSIONS_STRM_CHUNK_SIZE + && buf.nBuf>sessions_strm_chunk_size ){ rc = xOutput(pOut, (void*)buf.aBuf, buf.nBuf); nNoop = -1; @@ -178393,7 +195447,8 @@ int (*xInput)(void *pIn, void *pData, int *pnData), void *pIn, int nChangeset, /* Size of buffer pChangeset in bytes */ - void *pChangeset /* Pointer to buffer containing changeset */ + void *pChangeset, /* Pointer to buffer containing changeset */ + int bInvert /* True to invert changeset */ ){ sqlite3_changeset_iter *pRet; /* Iterator to return */ int nByte; /* Number of bytes to allocate for iterator */ @@ -178413,6 +195468,7 @@ pRet->in.xInput = xInput; pRet->in.pIn = pIn; pRet->in.bEof = (xInput ? 0 : 1); + pRet->bInvert = bInvert; /* Populate the output variable and return success. */ *pp = pRet; @@ -178427,8 +195483,17 @@ int nChangeset, /* Size of buffer pChangeset in bytes */ void *pChangeset /* Pointer to buffer containing changeset */ ){ - return sessionChangesetStart(pp, 0, 0, nChangeset, pChangeset); + return sessionChangesetStart(pp, 0, 0, nChangeset, pChangeset, 0); } +SQLITE_API int sqlite3changeset_start_v2( + sqlite3_changeset_iter **pp, /* OUT: Changeset iterator handle */ + int nChangeset, /* Size of buffer pChangeset in bytes */ + void *pChangeset, /* Pointer to buffer containing changeset */ + int flags +){ + int bInvert = !!(flags & SQLITE_CHANGESETSTART_INVERT); + return sessionChangesetStart(pp, 0, 0, nChangeset, pChangeset, bInvert); +} /* ** Streaming version of sqlite3changeset_start(). @@ -178438,8 +195503,17 @@ int (*xInput)(void *pIn, void *pData, int *pnData), void *pIn ){ - return sessionChangesetStart(pp, xInput, pIn, 0, 0); + return sessionChangesetStart(pp, xInput, pIn, 0, 0, 0); } +SQLITE_API int sqlite3changeset_start_v2_strm( + sqlite3_changeset_iter **pp, /* OUT: Changeset iterator handle */ + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int flags +){ + int bInvert = !!(flags & SQLITE_CHANGESETSTART_INVERT); + return sessionChangesetStart(pp, xInput, pIn, 0, 0, bInvert); +} /* ** If the SessionInput object passed as the only argument is a streaming @@ -178446,7 +195520,7 @@ ** object and the buffer is full, discard some data to free up space. */ static void sessionDiscardData(SessionInput *pIn){ - if( pIn->bEof && pIn->xInput && pIn->iNext>=SESSIONS_STRM_CHUNK_SIZE ){ + if( pIn->xInput && pIn->iNext>=sessions_strm_chunk_size ){ int nMove = pIn->buf.nBuf - pIn->iNext; assert( nMove>=0 ); if( nMove>0 ){ @@ -178469,7 +195543,7 @@ int rc = SQLITE_OK; if( pIn->xInput ){ while( !pIn->bEof && (pIn->iNext+nByte)>=pIn->nData && rc==SQLITE_OK ){ - int nNew = SESSIONS_STRM_CHUNK_SIZE; + int nNew = sessions_strm_chunk_size; if( pIn->bNoDiscard==0 ) sessionDiscardData(pIn); if( SQLITE_OK==sessionBufferGrow(&pIn->buf, nNew, &rc) ){ @@ -178574,15 +195648,18 @@ if( abPK && abPK[i]==0 ) continue; rc = sessionInputBuffer(pIn, 9); if( rc==SQLITE_OK ){ - eType = pIn->aData[pIn->iNext++]; + if( pIn->iNext>=pIn->nData ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + eType = pIn->aData[pIn->iNext++]; + assert( apOut[i]==0 ); + if( eType ){ + apOut[i] = sqlite3ValueNew(0); + if( !apOut[i] ) rc = SQLITE_NOMEM; + } + } } - assert( apOut[i]==0 ); - if( eType ){ - apOut[i] = sqlite3ValueNew(0); - if( !apOut[i] ) rc = SQLITE_NOMEM; - } - if( rc==SQLITE_OK ){ u8 *aVal = &pIn->aData[pIn->iNext]; if( eType==SQLITE_TEXT || eType==SQLITE_BLOB ){ @@ -178590,10 +195667,14 @@ pIn->iNext += sessionVarintGet(aVal, &nByte); rc = sessionInputBuffer(pIn, nByte); if( rc==SQLITE_OK ){ - u8 enc = (eType==SQLITE_TEXT ? SQLITE_UTF8 : 0); - rc = sessionValueSetStr(apOut[i],&pIn->aData[pIn->iNext],nByte,enc); + if( nByte<0 || nByte>pIn->nData-pIn->iNext ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + u8 enc = (eType==SQLITE_TEXT ? SQLITE_UTF8 : 0); + rc = sessionValueSetStr(apOut[i],&pIn->aData[pIn->iNext],nByte,enc); + pIn->iNext += nByte; + } } - pIn->iNext += nByte; } if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){ sqlite3_int64 v = sessionGetI64(aVal); @@ -178633,8 +195714,19 @@ rc = sessionInputBuffer(pIn, 9); if( rc==SQLITE_OK ){ nRead += sessionVarintGet(&pIn->aData[pIn->iNext + nRead], &nCol); - rc = sessionInputBuffer(pIn, nRead+nCol+100); - nRead += nCol; + /* The hard upper limit for the number of columns in an SQLite + ** database table is, according to sqliteLimit.h, 32676. So + ** consider any table-header that purports to have more than 65536 + ** columns to be corrupt. This is convenient because otherwise, + ** if the (nCol>65536) condition below were omitted, a sufficiently + ** large value for nCol may cause nRead to wrap around and become + ** negative. Leading to a crash. */ + if( nCol<0 || nCol>65536 ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + rc = sessionInputBuffer(pIn, nRead+nCol+100); + nRead += nCol; + } } while( rc==SQLITE_OK ){ @@ -178711,11 +195803,15 @@ int nByte; int nVarint; nVarint = sessionVarintGet(&p->in.aData[p->in.iNext], &p->nCol); - nCopy -= nVarint; - p->in.iNext += nVarint; - nByte = p->nCol * sizeof(sqlite3_value*) * 2 + nCopy; - p->tblhdr.nBuf = 0; - sessionBufferGrow(&p->tblhdr, nByte, &rc); + if( p->nCol>0 ){ + nCopy -= nVarint; + p->in.iNext += nVarint; + nByte = p->nCol * sizeof(sqlite3_value*) * 2 + nCopy; + p->tblhdr.nBuf = 0; + sessionBufferGrow(&p->tblhdr, nByte, &rc); + }else{ + rc = SQLITE_CORRUPT_BKPT; + } } if( rc==SQLITE_OK ){ @@ -178750,7 +195846,8 @@ static int sessionChangesetNext( sqlite3_changeset_iter *p, /* Changeset iterator */ u8 **paRec, /* If non-NULL, store record pointer here */ - int *pnRec /* If non-NULL, store size of record here */ + int *pnRec, /* If non-NULL, store size of record here */ + int *pbNew /* If non-NULL, true if new table */ ){ int i; u8 op; @@ -178785,6 +195882,7 @@ op = p->in.aData[p->in.iNext++]; while( op=='T' || op=='P' ){ + if( pbNew ) *pbNew = 1; p->bPatchset = (op=='P'); if( sessionChangesetReadTblhdr(p) ) return p->rc; if( (p->rc = sessionInputBuffer(&p->in, 2)) ) return p->rc; @@ -178793,6 +195891,13 @@ op = p->in.aData[p->in.iNext++]; } + if( p->zTab==0 || (p->bPatchset && p->bInvert) ){ + /* The first record in the changeset is not a table header. Must be a + ** corrupt changeset. */ + assert( p->in.iNext==1 || p->zTab ); + return (p->rc = SQLITE_CORRUPT_BKPT); + } + p->op = op; p->bIndirect = p->in.aData[p->in.iNext++]; if( p->op!=SQLITE_UPDATE && p->op!=SQLITE_DELETE && p->op!=SQLITE_INSERT ){ @@ -178814,33 +195919,39 @@ *paRec = &p->in.aData[p->in.iNext]; p->in.iNext += *pnRec; }else{ + sqlite3_value **apOld = (p->bInvert ? &p->apValue[p->nCol] : p->apValue); + sqlite3_value **apNew = (p->bInvert ? p->apValue : &p->apValue[p->nCol]); /* If this is an UPDATE or DELETE, read the old.* record. */ if( p->op!=SQLITE_INSERT && (p->bPatchset==0 || p->op==SQLITE_DELETE) ){ u8 *abPK = p->bPatchset ? p->abPK : 0; - p->rc = sessionReadRecord(&p->in, p->nCol, abPK, p->apValue); + p->rc = sessionReadRecord(&p->in, p->nCol, abPK, apOld); if( p->rc!=SQLITE_OK ) return p->rc; } /* If this is an INSERT or UPDATE, read the new.* record. */ if( p->op!=SQLITE_DELETE ){ - p->rc = sessionReadRecord(&p->in, p->nCol, 0, &p->apValue[p->nCol]); + p->rc = sessionReadRecord(&p->in, p->nCol, 0, apNew); if( p->rc!=SQLITE_OK ) return p->rc; } - if( p->bPatchset && p->op==SQLITE_UPDATE ){ + if( (p->bPatchset || p->bInvert) && p->op==SQLITE_UPDATE ){ /* If this is an UPDATE that is part of a patchset, then all PK and ** modified fields are present in the new.* record. The old.* record ** is currently completely empty. This block shifts the PK fields from ** new.* to old.*, to accommodate the code that reads these arrays. */ for(i=0; inCol; i++){ - assert( p->apValue[i]==0 ); - assert( p->abPK[i]==0 || p->apValue[i+p->nCol] ); + assert( p->bPatchset==0 || p->apValue[i]==0 ); if( p->abPK[i] ){ + assert( p->apValue[i]==0 ); p->apValue[i] = p->apValue[i+p->nCol]; + if( p->apValue[i]==0 ) return (p->rc = SQLITE_CORRUPT_BKPT); p->apValue[i+p->nCol] = 0; } } + }else if( p->bInvert ){ + if( p->op==SQLITE_INSERT ) p->op = SQLITE_DELETE; + else if( p->op==SQLITE_DELETE ) p->op = SQLITE_INSERT; } } @@ -178856,7 +195967,7 @@ ** callback by changeset_apply(). */ SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *p){ - return sessionChangesetNext(p, 0, 0); + return sessionChangesetNext(p, 0, 0, 0); } /* @@ -179157,7 +196268,7 @@ } assert( rc==SQLITE_OK ); - if( xOutput && sOut.nBuf>=SESSIONS_STRM_CHUNK_SIZE ){ + if( xOutput && sOut.nBuf>=sessions_strm_chunk_size ){ rc = xOutput(pOut, sOut.aBuf, sOut.nBuf); sOut.nBuf = 0; if( rc!=SQLITE_OK ) goto finished_invert; @@ -179232,9 +196343,12 @@ int nCol; /* Size of azCol[] and abPK[] arrays */ const char **azCol; /* Array of column names */ u8 *abPK; /* Boolean array - true if column is in PK */ - + int bStat1; /* True if table is sqlite_stat1 */ int bDeferConstraints; /* True to defer constraints */ SessionBuffer constraints; /* Deferred constraints are stored here */ + SessionBuffer rebase; /* Rebase information (if any) here */ + u8 bRebaseStarted; /* If table header is already in rebase */ + u8 bRebase; /* True to collect rebase information */ }; /* @@ -179402,6 +196516,7 @@ return rc; } + /* ** Formulate and prepare an SQL statement to query table zTab by primary ** key. Assuming the following table structure: @@ -179463,7 +196578,47 @@ return rc; } +static int sessionPrepare(sqlite3 *db, sqlite3_stmt **pp, const char *zSql){ + return sqlite3_prepare_v2(db, zSql, -1, pp, 0); +} + /* +** Prepare statements for applying changes to the sqlite_stat1 table. +** These are similar to those created by sessionSelectRow(), +** sessionInsertRow(), sessionUpdateRow() and sessionDeleteRow() for +** other tables. +*/ +static int sessionStat1Sql(sqlite3 *db, SessionApplyCtx *p){ + int rc = sessionSelectRow(db, "sqlite_stat1", p); + if( rc==SQLITE_OK ){ + rc = sessionPrepare(db, &p->pInsert, + "INSERT INTO main.sqlite_stat1 VALUES(?1, " + "CASE WHEN length(?2)=0 AND typeof(?2)='blob' THEN NULL ELSE ?2 END, " + "?3)" + ); + } + if( rc==SQLITE_OK ){ + rc = sessionPrepare(db, &p->pUpdate, + "UPDATE main.sqlite_stat1 SET " + "tbl = CASE WHEN ?2 THEN ?3 ELSE tbl END, " + "idx = CASE WHEN ?5 THEN ?6 ELSE idx END, " + "stat = CASE WHEN ?8 THEN ?9 ELSE stat END " + "WHERE tbl=?1 AND idx IS " + "CASE WHEN length(?4)=0 AND typeof(?4)='blob' THEN NULL ELSE ?4 END " + "AND (?10 OR ?8=0 OR stat IS ?7)" + ); + } + if( rc==SQLITE_OK ){ + rc = sessionPrepare(db, &p->pDelete, + "DELETE FROM main.sqlite_stat1 WHERE tbl=?1 AND idx IS " + "CASE WHEN length(?2)=0 AND typeof(?2)='blob' THEN NULL ELSE ?2 END " + "AND (?4 OR stat IS ?3)" + ); + } + return rc; +} + +/* ** A wrapper around sqlite3_bind_value() that detects an extra problem. ** See comments in the body of this function for details. */ @@ -179520,7 +196675,13 @@ if( !abPK || abPK[i] ){ sqlite3_value *pVal; (void)xValue(pIter, i, &pVal); - rc = sessionBindValue(pStmt, i+1, pVal); + if( pVal==0 ){ + /* The value in the changeset was "undefined". This indicates a + ** corrupt changeset blob. */ + rc = SQLITE_CORRUPT_BKPT; + }else{ + rc = sessionBindValue(pStmt, i+1, pVal); + } } } return rc; @@ -179569,6 +196730,55 @@ } /* +** This function is called from within sqlite3changset_apply_v2() when +** a conflict is encountered and resolved using conflict resolution +** mode eType (either SQLITE_CHANGESET_OMIT or SQLITE_CHANGESET_REPLACE).. +** It adds a conflict resolution record to the buffer in +** SessionApplyCtx.rebase, which will eventually be returned to the caller +** of apply_v2() as the "rebase" buffer. +** +** Return SQLITE_OK if successful, or an SQLite error code otherwise. +*/ +static int sessionRebaseAdd( + SessionApplyCtx *p, /* Apply context */ + int eType, /* Conflict resolution (OMIT or REPLACE) */ + sqlite3_changeset_iter *pIter /* Iterator pointing at current change */ +){ + int rc = SQLITE_OK; + if( p->bRebase ){ + int i; + int eOp = pIter->op; + if( p->bRebaseStarted==0 ){ + /* Append a table-header to the rebase buffer */ + const char *zTab = pIter->zTab; + sessionAppendByte(&p->rebase, 'T', &rc); + sessionAppendVarint(&p->rebase, p->nCol, &rc); + sessionAppendBlob(&p->rebase, p->abPK, p->nCol, &rc); + sessionAppendBlob(&p->rebase, (u8*)zTab, (int)strlen(zTab)+1, &rc); + p->bRebaseStarted = 1; + } + + assert( eType==SQLITE_CHANGESET_REPLACE||eType==SQLITE_CHANGESET_OMIT ); + assert( eOp==SQLITE_DELETE || eOp==SQLITE_INSERT || eOp==SQLITE_UPDATE ); + + sessionAppendByte(&p->rebase, + (eOp==SQLITE_DELETE ? SQLITE_DELETE : SQLITE_INSERT), &rc + ); + sessionAppendByte(&p->rebase, (eType==SQLITE_CHANGESET_REPLACE), &rc); + for(i=0; inCol; i++){ + sqlite3_value *pVal = 0; + if( eOp==SQLITE_DELETE || (eOp==SQLITE_UPDATE && p->abPK[i]) ){ + sqlite3changeset_old(pIter, i, &pVal); + }else{ + sqlite3changeset_new(pIter, i, &pVal); + } + sessionAppendValue(&p->rebase, pVal, &rc); + } + } + return rc; +} + +/* ** Invoke the conflict handler for the change that the changeset iterator ** currently points to. ** @@ -179643,7 +196853,7 @@ u8 *aBlob = &pIter->in.aData[pIter->in.iCurrent]; int nBlob = pIter->in.iNext - pIter->in.iCurrent; sessionAppendBlob(&p->constraints, aBlob, nBlob, &rc); - res = SQLITE_CHANGESET_OMIT; + return SQLITE_OK; }else{ /* No other row with the new.* primary key. */ res = xConflict(pCtx, eType+1, pIter); @@ -179669,6 +196879,9 @@ rc = SQLITE_MISUSE; break; } + if( rc==SQLITE_OK ){ + rc = sessionRebaseAdd(p, res, pIter); + } } return rc; @@ -179793,11 +197006,25 @@ }else{ assert( op==SQLITE_INSERT ); - rc = sessionBindRow(pIter, sqlite3changeset_new, nCol, 0, p->pInsert); - if( rc!=SQLITE_OK ) return rc; + if( p->bStat1 ){ + /* Check if there is a conflicting row. For sqlite_stat1, this needs + ** to be done using a SELECT, as there is no PRIMARY KEY in the + ** database schema to throw an exception if a duplicate is inserted. */ + rc = sessionSeekToRow(p->db, pIter, p->abPK, p->pSelect); + if( rc==SQLITE_ROW ){ + rc = SQLITE_CONSTRAINT; + sqlite3_reset(p->pSelect); + } + } - sqlite3_step(p->pInsert); - rc = sqlite3_reset(p->pInsert); + if( rc==SQLITE_OK ){ + rc = sessionBindRow(pIter, sqlite3changeset_new, nCol, 0, p->pInsert); + if( rc!=SQLITE_OK ) return rc; + + sqlite3_step(p->pInsert); + rc = sqlite3_reset(p->pInsert); + } + if( (rc&0xff)==SQLITE_CONSTRAINT ){ rc = sessionConflictHandler( SQLITE_CHANGESET_CONFLICT, p, pIter, xConflict, pCtx, pbReplace @@ -179830,42 +197057,42 @@ int rc; rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, &bReplace, &bRetry); - assert( rc==SQLITE_OK || (bRetry==0 && bReplace==0) ); - - /* If the bRetry flag is set, the change has not been applied due to an - ** SQLITE_CHANGESET_DATA problem (i.e. this is an UPDATE or DELETE and - ** a row with the correct PK is present in the db, but one or more other - ** fields do not contain the expected values) and the conflict handler - ** returned SQLITE_CHANGESET_REPLACE. In this case retry the operation, - ** but pass NULL as the final argument so that sessionApplyOneOp() ignores - ** the SQLITE_CHANGESET_DATA problem. */ - if( bRetry ){ - assert( pIter->op==SQLITE_UPDATE || pIter->op==SQLITE_DELETE ); - rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0); - } - - /* If the bReplace flag is set, the change is an INSERT that has not - ** been performed because the database already contains a row with the - ** specified primary key and the conflict handler returned - ** SQLITE_CHANGESET_REPLACE. In this case remove the conflicting row - ** before reattempting the INSERT. */ - else if( bReplace ){ - assert( pIter->op==SQLITE_INSERT ); - rc = sqlite3_exec(db, "SAVEPOINT replace_op", 0, 0, 0); - if( rc==SQLITE_OK ){ - rc = sessionBindRow(pIter, - sqlite3changeset_new, pApply->nCol, pApply->abPK, pApply->pDelete); - sqlite3_bind_int(pApply->pDelete, pApply->nCol+1, 1); - } - if( rc==SQLITE_OK ){ - sqlite3_step(pApply->pDelete); - rc = sqlite3_reset(pApply->pDelete); - } - if( rc==SQLITE_OK ){ + if( rc==SQLITE_OK ){ + /* If the bRetry flag is set, the change has not been applied due to an + ** SQLITE_CHANGESET_DATA problem (i.e. this is an UPDATE or DELETE and + ** a row with the correct PK is present in the db, but one or more other + ** fields do not contain the expected values) and the conflict handler + ** returned SQLITE_CHANGESET_REPLACE. In this case retry the operation, + ** but pass NULL as the final argument so that sessionApplyOneOp() ignores + ** the SQLITE_CHANGESET_DATA problem. */ + if( bRetry ){ + assert( pIter->op==SQLITE_UPDATE || pIter->op==SQLITE_DELETE ); rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0); } - if( rc==SQLITE_OK ){ - rc = sqlite3_exec(db, "RELEASE replace_op", 0, 0, 0); + + /* If the bReplace flag is set, the change is an INSERT that has not + ** been performed because the database already contains a row with the + ** specified primary key and the conflict handler returned + ** SQLITE_CHANGESET_REPLACE. In this case remove the conflicting row + ** before reattempting the INSERT. */ + else if( bReplace ){ + assert( pIter->op==SQLITE_INSERT ); + rc = sqlite3_exec(db, "SAVEPOINT replace_op", 0, 0, 0); + if( rc==SQLITE_OK ){ + rc = sessionBindRow(pIter, + sqlite3changeset_new, pApply->nCol, pApply->abPK, pApply->pDelete); + sqlite3_bind_int(pApply->pDelete, pApply->nCol+1, 1); + } + if( rc==SQLITE_OK ){ + sqlite3_step(pApply->pDelete); + rc = sqlite3_reset(pApply->pDelete); + } + if( rc==SQLITE_OK ){ + rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0); + } + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(db, "RELEASE replace_op", 0, 0, 0); + } } } @@ -179890,7 +197117,7 @@ SessionBuffer cons = pApply->constraints; memset(&pApply->constraints, 0, sizeof(SessionBuffer)); - rc = sessionChangesetStart(&pIter2, 0, 0, cons.nBuf, cons.aBuf); + rc = sessionChangesetStart(&pIter2, 0, 0, cons.nBuf, cons.aBuf, 0); if( rc==SQLITE_OK ){ int nByte = 2*pApply->nCol*sizeof(sqlite3_value*); int rc2; @@ -179941,10 +197168,12 @@ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ sqlite3_changeset_iter *p /* Handle describing change and conflict */ ), - void *pCtx /* First argument passed to xConflict */ + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, /* OUT: Rebase information */ + int flags /* SESSION_APPLY_XXX flags */ ){ int schemaMismatch = 0; - int rc; /* Return code */ + int rc = SQLITE_OK; /* Return code */ const char *zTab = 0; /* Name of current table */ int nTab = 0; /* Result of sqlite3Strlen30(zTab) */ SessionApplyCtx sApply; /* changeset_apply() context object */ @@ -179954,8 +197183,11 @@ pIter->in.bNoDiscard = 1; memset(&sApply, 0, sizeof(sApply)); + sApply.bRebase = (ppRebase && pnRebase); sqlite3_mutex_enter(sqlite3_db_mutex(db)); - rc = sqlite3_exec(db, "SAVEPOINT changeset_apply", 0, 0, 0); + if( (flags & SQLITE_CHANGESETAPPLY_NOSAVEPOINT)==0 ){ + rc = sqlite3_exec(db, "SAVEPOINT changeset_apply", 0, 0, 0); + } if( rc==SQLITE_OK ){ rc = sqlite3_exec(db, "PRAGMA defer_foreign_keys = 1", 0, 0, 0); } @@ -179979,9 +197211,18 @@ sqlite3_finalize(sApply.pUpdate); sqlite3_finalize(sApply.pInsert); sqlite3_finalize(sApply.pSelect); - memset(&sApply, 0, sizeof(sApply)); sApply.db = db; + sApply.pDelete = 0; + sApply.pUpdate = 0; + sApply.pInsert = 0; + sApply.pSelect = 0; + sApply.nCol = 0; + sApply.azCol = 0; + sApply.abPK = 0; + sApply.bStat1 = 0; sApply.bDeferConstraints = 1; + sApply.bRebaseStarted = 0; + memset(&sApply.constraints, 0, sizeof(SessionBuffer)); /* If an xFilter() callback was specified, invoke it now. If the ** xFilter callback returns zero, skip this table. If it returns @@ -180030,12 +197271,20 @@ } else{ sApply.nCol = nCol; - if((rc = sessionSelectRow(db, zTab, &sApply)) - || (rc = sessionUpdateRow(db, zTab, &sApply)) - || (rc = sessionDeleteRow(db, zTab, &sApply)) - || (rc = sessionInsertRow(db, zTab, &sApply)) - ){ - break; + if( 0==sqlite3_stricmp(zTab, "sqlite_stat1") ){ + if( (rc = sessionStat1Sql(db, &sApply) ) ){ + break; + } + sApply.bStat1 = 1; + }else{ + if((rc = sessionSelectRow(db, zTab, &sApply)) + || (rc = sessionUpdateRow(db, zTab, &sApply)) + || (rc = sessionDeleteRow(db, zTab, &sApply)) + || (rc = sessionInsertRow(db, zTab, &sApply)) + ){ + break; + } + sApply.bStat1 = 0; } } nTab = sqlite3Strlen30(zTab); @@ -180076,13 +197325,21 @@ } sqlite3_exec(db, "PRAGMA defer_foreign_keys = 0", 0, 0, 0); - if( rc==SQLITE_OK ){ - rc = sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); - }else{ - sqlite3_exec(db, "ROLLBACK TO changeset_apply", 0, 0, 0); - sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); + if( (flags & SQLITE_CHANGESETAPPLY_NOSAVEPOINT)==0 ){ + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); + }else{ + sqlite3_exec(db, "ROLLBACK TO changeset_apply", 0, 0, 0); + sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); + } } + assert( sApply.bRebase || sApply.rebase.nBuf==0 ); + if( rc==SQLITE_OK && bPatchset==0 && sApply.bRebase ){ + *ppRebase = (void*)sApply.rebase.aBuf; + *pnRebase = sApply.rebase.nBuf; + sApply.rebase.aBuf = 0; + } sqlite3_finalize(sApply.pInsert); sqlite3_finalize(sApply.pDelete); sqlite3_finalize(sApply.pUpdate); @@ -180089,11 +197346,44 @@ sqlite3_finalize(sApply.pSelect); sqlite3_free((char*)sApply.azCol); /* cast works around VC++ bug */ sqlite3_free((char*)sApply.constraints.aBuf); + sqlite3_free((char*)sApply.rebase.aBuf); sqlite3_mutex_leave(sqlite3_db_mutex(db)); return rc; } /* +** Apply the changeset passed via pChangeset/nChangeset to the main +** database attached to handle "db". +*/ +SQLITE_API int sqlite3changeset_apply_v2( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int nChangeset, /* Size of changeset in bytes */ + void *pChangeset, /* Changeset blob */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, + int flags +){ + sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */ + int bInverse = !!(flags & SQLITE_CHANGESETAPPLY_INVERT); + int rc = sessionChangesetStart(&pIter, 0, 0, nChangeset, pChangeset,bInverse); + if( rc==SQLITE_OK ){ + rc = sessionChangesetApply( + db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase, flags + ); + } + return rc; +} + +/* ** Apply the changeset passed via pChangeset/nChangeset to the main database ** attached to handle "db". Invoke the supplied conflict handler callback ** to resolve any conflicts encountered while applying the change. @@ -180113,12 +197403,9 @@ ), void *pCtx /* First argument passed to xConflict */ ){ - sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */ - int rc = sqlite3changeset_start(&pIter, nChangeset, pChangeset); - if( rc==SQLITE_OK ){ - rc = sessionChangesetApply(db, pIter, xFilter, xConflict, pCtx); - } - return rc; + return sqlite3changeset_apply_v2( + db, nChangeset, pChangeset, xFilter, xConflict, pCtx, 0, 0, 0 + ); } /* @@ -180126,7 +197413,7 @@ ** attached to handle "db". Invoke the supplied conflict handler callback ** to resolve any conflicts encountered while applying the change. */ -SQLITE_API int sqlite3changeset_apply_strm( +SQLITE_API int sqlite3changeset_apply_v2_strm( sqlite3 *db, /* Apply change to "main" db of this handle */ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */ void *pIn, /* First arg for xInput */ @@ -180139,15 +197426,39 @@ int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ sqlite3_changeset_iter *p /* Handle describing change and conflict */ ), - void *pCtx /* First argument passed to xConflict */ + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, + int flags ){ sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */ - int rc = sqlite3changeset_start_strm(&pIter, xInput, pIn); + int bInverse = !!(flags & SQLITE_CHANGESETAPPLY_INVERT); + int rc = sessionChangesetStart(&pIter, xInput, pIn, 0, 0, bInverse); if( rc==SQLITE_OK ){ - rc = sessionChangesetApply(db, pIter, xFilter, xConflict, pCtx); + rc = sessionChangesetApply( + db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase, flags + ); } return rc; } +SQLITE_API int sqlite3changeset_apply_strm( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */ + void *pIn, /* First arg for xInput */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx /* First argument passed to xConflict */ +){ + return sqlite3changeset_apply_v2_strm( + db, xInput, pIn, xFilter, xConflict, pCtx, 0, 0, 0 + ); +} /* ** sqlite3_changegroup handle. @@ -180165,6 +197476,7 @@ */ static int sessionChangeMerge( SessionTable *pTab, /* Table structure */ + int bRebase, /* True for a rebase hash-table */ int bPatchset, /* True for patchsets */ SessionChange *pExist, /* Existing change */ int op2, /* Second change operation */ @@ -180174,6 +197486,7 @@ SessionChange **ppNew /* OUT: Merged change */ ){ SessionChange *pNew = 0; + int rc = SQLITE_OK; if( !pExist ){ pNew = (SessionChange *)sqlite3_malloc(sizeof(SessionChange) + nRec); @@ -180183,9 +197496,66 @@ memset(pNew, 0, sizeof(SessionChange)); pNew->op = op2; pNew->bIndirect = bIndirect; - pNew->nRecord = nRec; pNew->aRecord = (u8*)&pNew[1]; - memcpy(pNew->aRecord, aRec, nRec); + if( bIndirect==0 || bRebase==0 ){ + pNew->nRecord = nRec; + memcpy(pNew->aRecord, aRec, nRec); + }else{ + int i; + u8 *pIn = aRec; + u8 *pOut = pNew->aRecord; + for(i=0; inCol; i++){ + int nIn = sessionSerialLen(pIn); + if( *pIn==0 ){ + *pOut++ = 0; + }else if( pTab->abPK[i]==0 ){ + *pOut++ = 0xFF; + }else{ + memcpy(pOut, pIn, nIn); + pOut += nIn; + } + pIn += nIn; + } + pNew->nRecord = pOut - pNew->aRecord; + } + }else if( bRebase ){ + if( pExist->op==SQLITE_DELETE && pExist->bIndirect ){ + *ppNew = pExist; + }else{ + int nByte = nRec + pExist->nRecord + sizeof(SessionChange); + pNew = (SessionChange*)sqlite3_malloc(nByte); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + int i; + u8 *a1 = pExist->aRecord; + u8 *a2 = aRec; + u8 *pOut; + + memset(pNew, 0, nByte); + pNew->bIndirect = bIndirect || pExist->bIndirect; + pNew->op = op2; + pOut = pNew->aRecord = (u8*)&pNew[1]; + + for(i=0; inCol; i++){ + int n1 = sessionSerialLen(a1); + int n2 = sessionSerialLen(a2); + if( *a1==0xFF || (pTab->abPK[i]==0 && bIndirect) ){ + *pOut++ = 0xFF; + }else if( *a2==0 ){ + memcpy(pOut, a1, n1); + pOut += n1; + }else{ + memcpy(pOut, a2, n2); + pOut += n2; + } + a1 += n1; + a2 += n2; + } + pNew->nRecord = pOut - pNew->aRecord; + } + sqlite3_free(pExist); + } }else{ int op1 = pExist->op; @@ -180279,7 +197649,7 @@ } *ppNew = pNew; - return SQLITE_OK; + return rc; } /* @@ -180288,7 +197658,8 @@ */ static int sessionChangesetToHash( sqlite3_changeset_iter *pIter, /* Iterator to read from */ - sqlite3_changegroup *pGrp /* Changegroup object to add changeset to */ + sqlite3_changegroup *pGrp, /* Changegroup object to add changeset to */ + int bRebase /* True if hash table is for rebasing */ ){ u8 *aRec; int nRec; @@ -180295,8 +197666,7 @@ int rc = SQLITE_OK; SessionTable *pTab = 0; - - while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec) ){ + while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec, 0) ){ const char *zNew; int nCol; int op; @@ -180376,7 +197746,7 @@ } } - rc = sessionChangeMerge(pTab, + rc = sessionChangeMerge(pTab, bRebase, pIter->bPatchset, pExist, op, bIndirect, aRec, nRec, &pChange ); if( rc ) break; @@ -180435,13 +197805,12 @@ sessionAppendByte(&buf, p->op, &rc); sessionAppendByte(&buf, p->bIndirect, &rc); sessionAppendBlob(&buf, p->aRecord, p->nRecord, &rc); + if( rc==SQLITE_OK && xOutput && buf.nBuf>=sessions_strm_chunk_size ){ + rc = xOutput(pOut, buf.aBuf, buf.nBuf); + buf.nBuf = 0; + } } } - - if( rc==SQLITE_OK && xOutput && buf.nBuf>=SESSIONS_STRM_CHUNK_SIZE ){ - rc = xOutput(pOut, buf.aBuf, buf.nBuf); - buf.nBuf = 0; - } } if( rc==SQLITE_OK ){ @@ -180484,7 +197853,7 @@ rc = sqlite3changeset_start(&pIter, nData, pData); if( rc==SQLITE_OK ){ - rc = sessionChangesetToHash(pIter, pGrp); + rc = sessionChangesetToHash(pIter, pGrp, 0); } sqlite3changeset_finalize(pIter); return rc; @@ -180515,7 +197884,7 @@ rc = sqlite3changeset_start_strm(&pIter, xInput, pIn); if( rc==SQLITE_OK ){ - rc = sessionChangesetToHash(pIter, pGrp); + rc = sessionChangesetToHash(pIter, pGrp, 0); } sqlite3changeset_finalize(pIter); return rc; @@ -180600,2439 +197969,373 @@ return rc; } -#endif /* SQLITE_ENABLE_SESSION && SQLITE_ENABLE_PREUPDATE_HOOK */ - -/************** End of sqlite3session.c **************************************/ -/************** Begin file json1.c *******************************************/ /* -** 2015-08-12 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -****************************************************************************** -** -** This SQLite extension implements JSON functions. The interface is -** modeled after MySQL JSON functions: -** -** https://dev.mysql.com/doc/refman/5.7/en/json.html -** -** For the time being, all JSON is stored as pure text. (We might add -** a JSONB type in the future which stores a binary encoding of JSON in -** a BLOB, but there is no support for JSONB in the current implementation. -** This implementation parses JSON text at 250 MB/s, so it is hard to see -** how JSONB might improve on that.) +** Changeset rebaser handle. */ -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_JSON1) -#if !defined(SQLITEINT_H) -/* #include "sqlite3ext.h" */ -#endif -SQLITE_EXTENSION_INIT1 -/* #include */ -/* #include */ -/* #include */ -/* #include */ - -/* Mark a function parameter as unused, to suppress nuisance compiler -** warnings. */ -#ifndef UNUSED_PARAM -# define UNUSED_PARAM(X) (void)(X) -#endif - -#ifndef LARGEST_INT64 -# define LARGEST_INT64 (0xffffffff|(((sqlite3_int64)0x7fffffff)<<32)) -# define SMALLEST_INT64 (((sqlite3_int64)-1) - LARGEST_INT64) -#endif - -/* -** Versions of isspace(), isalnum() and isdigit() to which it is safe -** to pass signed char values. -*/ -#ifdef sqlite3Isdigit - /* Use the SQLite core versions if this routine is part of the - ** SQLite amalgamation */ -# define safe_isdigit(x) sqlite3Isdigit(x) -# define safe_isalnum(x) sqlite3Isalnum(x) -# define safe_isxdigit(x) sqlite3Isxdigit(x) -#else - /* Use the standard library for separate compilation */ -#include /* amalgamator: keep */ -# define safe_isdigit(x) isdigit((unsigned char)(x)) -# define safe_isalnum(x) isalnum((unsigned char)(x)) -# define safe_isxdigit(x) isxdigit((unsigned char)(x)) -#endif - -/* -** Growing our own isspace() routine this way is twice as fast as -** the library isspace() function, resulting in a 7% overall performance -** increase for the parser. (Ubuntu14.10 gcc 4.8.4 x64 with -Os). -*/ -static const char jsonIsSpace[] = { - 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, +struct sqlite3_rebaser { + sqlite3_changegroup grp; /* Hash table */ }; -#define safe_isspace(x) (jsonIsSpace[(unsigned char)x]) -#ifndef SQLITE_AMALGAMATION - /* Unsigned integer types. These are already defined in the sqliteInt.h, - ** but the definitions need to be repeated for separate compilation. */ - typedef sqlite3_uint64 u64; - typedef unsigned int u32; - typedef unsigned short int u16; - typedef unsigned char u8; -#endif - -/* Objects */ -typedef struct JsonString JsonString; -typedef struct JsonNode JsonNode; -typedef struct JsonParse JsonParse; - -/* An instance of this object represents a JSON string -** under construction. Really, this is a generic string accumulator -** that can be and is used to create strings other than JSON. -*/ -struct JsonString { - sqlite3_context *pCtx; /* Function context - put error messages here */ - char *zBuf; /* Append JSON content here */ - u64 nAlloc; /* Bytes of storage available in zBuf[] */ - u64 nUsed; /* Bytes of zBuf[] currently used */ - u8 bStatic; /* True if zBuf is static space */ - u8 bErr; /* True if an error has been encountered */ - char zSpace[100]; /* Initial static space */ -}; - -/* JSON type values -*/ -#define JSON_NULL 0 -#define JSON_TRUE 1 -#define JSON_FALSE 2 -#define JSON_INT 3 -#define JSON_REAL 4 -#define JSON_STRING 5 -#define JSON_ARRAY 6 -#define JSON_OBJECT 7 - -/* The "subtype" set for JSON values */ -#define JSON_SUBTYPE 74 /* Ascii for "J" */ - /* -** Names of the various JSON types: +** Buffers a1 and a2 must both contain a sessions module record nCol +** fields in size. This function appends an nCol sessions module +** record to buffer pBuf that is a copy of a1, except that for +** each field that is undefined in a1[], swap in the field from a2[]. */ -static const char * const jsonType[] = { - "null", "true", "false", "integer", "real", "text", "array", "object" -}; - -/* Bit values for the JsonNode.jnFlag field -*/ -#define JNODE_RAW 0x01 /* Content is raw, not JSON encoded */ -#define JNODE_ESCAPE 0x02 /* Content is text with \ escapes */ -#define JNODE_REMOVE 0x04 /* Do not output */ -#define JNODE_REPLACE 0x08 /* Replace with JsonNode.u.iReplace */ -#define JNODE_PATCH 0x10 /* Patch with JsonNode.u.pPatch */ -#define JNODE_APPEND 0x20 /* More ARRAY/OBJECT entries at u.iAppend */ -#define JNODE_LABEL 0x40 /* Is a label of an object */ - - -/* A single node of parsed JSON -*/ -struct JsonNode { - u8 eType; /* One of the JSON_ type values */ - u8 jnFlags; /* JNODE flags */ - u32 n; /* Bytes of content, or number of sub-nodes */ - union { - const char *zJContent; /* Content for INT, REAL, and STRING */ - u32 iAppend; /* More terms for ARRAY and OBJECT */ - u32 iKey; /* Key for ARRAY objects in json_tree() */ - u32 iReplace; /* Replacement content for JNODE_REPLACE */ - JsonNode *pPatch; /* Node chain of patch for JNODE_PATCH */ - } u; -}; - -/* A completely parsed JSON string -*/ -struct JsonParse { - u32 nNode; /* Number of slots of aNode[] used */ - u32 nAlloc; /* Number of slots of aNode[] allocated */ - JsonNode *aNode; /* Array of nodes containing the parse */ - const char *zJson; /* Original JSON string */ - u32 *aUp; /* Index of parent of each node */ - u8 oom; /* Set to true if out of memory */ - u8 nErr; /* Number of errors seen */ - u16 iDepth; /* Nesting depth */ - int nJson; /* Length of the zJson string in bytes */ -}; - -/* -** Maximum nesting depth of JSON for this implementation. -** -** This limit is needed to avoid a stack overflow in the recursive -** descent parser. A depth of 2000 is far deeper than any sane JSON -** should go. -*/ -#define JSON_MAX_DEPTH 2000 - -/************************************************************************** -** Utility routines for dealing with JsonString objects -**************************************************************************/ - -/* Set the JsonString object to an empty string -*/ -static void jsonZero(JsonString *p){ - p->zBuf = p->zSpace; - p->nAlloc = sizeof(p->zSpace); - p->nUsed = 0; - p->bStatic = 1; -} - -/* Initialize the JsonString object -*/ -static void jsonInit(JsonString *p, sqlite3_context *pCtx){ - p->pCtx = pCtx; - p->bErr = 0; - jsonZero(p); -} - - -/* Free all allocated memory and reset the JsonString object back to its -** initial state. -*/ -static void jsonReset(JsonString *p){ - if( !p->bStatic ) sqlite3_free(p->zBuf); - jsonZero(p); -} - - -/* Report an out-of-memory (OOM) condition -*/ -static void jsonOom(JsonString *p){ - p->bErr = 1; - sqlite3_result_error_nomem(p->pCtx); - jsonReset(p); -} - -/* Enlarge pJson->zBuf so that it can hold at least N more bytes. -** Return zero on success. Return non-zero on an OOM error -*/ -static int jsonGrow(JsonString *p, u32 N){ - u64 nTotal = NnAlloc ? p->nAlloc*2 : p->nAlloc+N+10; - char *zNew; - if( p->bStatic ){ - if( p->bErr ) return 1; - zNew = sqlite3_malloc64(nTotal); - if( zNew==0 ){ - jsonOom(p); - return SQLITE_NOMEM; - } - memcpy(zNew, p->zBuf, (size_t)p->nUsed); - p->zBuf = zNew; - p->bStatic = 0; - }else{ - zNew = sqlite3_realloc64(p->zBuf, nTotal); - if( zNew==0 ){ - jsonOom(p); - return SQLITE_NOMEM; - } - p->zBuf = zNew; - } - p->nAlloc = nTotal; - return SQLITE_OK; -} - -/* Append N bytes from zIn onto the end of the JsonString string. -*/ -static void jsonAppendRaw(JsonString *p, const char *zIn, u32 N){ - if( (N+p->nUsed >= p->nAlloc) && jsonGrow(p,N)!=0 ) return; - memcpy(p->zBuf+p->nUsed, zIn, N); - p->nUsed += N; -} - -/* Append formatted text (not to exceed N bytes) to the JsonString. -*/ -static void jsonPrintf(int N, JsonString *p, const char *zFormat, ...){ - va_list ap; - if( (p->nUsed + N >= p->nAlloc) && jsonGrow(p, N) ) return; - va_start(ap, zFormat); - sqlite3_vsnprintf(N, p->zBuf+p->nUsed, zFormat, ap); - va_end(ap); - p->nUsed += (int)strlen(p->zBuf+p->nUsed); -} - -/* Append a single character -*/ -static void jsonAppendChar(JsonString *p, char c){ - if( p->nUsed>=p->nAlloc && jsonGrow(p,1)!=0 ) return; - p->zBuf[p->nUsed++] = c; -} - -/* Append a comma separator to the output buffer, if the previous -** character is not '[' or '{'. -*/ -static void jsonAppendSeparator(JsonString *p){ - char c; - if( p->nUsed==0 ) return; - c = p->zBuf[p->nUsed-1]; - if( c!='[' && c!='{' ) jsonAppendChar(p, ','); -} - -/* Append the N-byte string in zIn to the end of the JsonString string -** under construction. Enclose the string in "..." and escape -** any double-quotes or backslash characters contained within the -** string. -*/ -static void jsonAppendString(JsonString *p, const char *zIn, u32 N){ - u32 i; - if( (N+p->nUsed+2 >= p->nAlloc) && jsonGrow(p,N+2)!=0 ) return; - p->zBuf[p->nUsed++] = '"'; - for(i=0; inUsed+N+3-i > p->nAlloc) && jsonGrow(p,N+3-i)!=0 ) return; - p->zBuf[p->nUsed++] = '\\'; - }else if( c<=0x1f ){ - static const char aSpecial[] = { - 0, 0, 0, 0, 0, 0, 0, 0, 'b', 't', 'n', 0, 'f', 'r', 0, 0, - 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 - }; - assert( sizeof(aSpecial)==32 ); - assert( aSpecial['\b']=='b' ); - assert( aSpecial['\f']=='f' ); - assert( aSpecial['\n']=='n' ); - assert( aSpecial['\r']=='r' ); - assert( aSpecial['\t']=='t' ); - if( aSpecial[c] ){ - c = aSpecial[c]; - goto json_simple_escape; - } - if( (p->nUsed+N+7+i > p->nAlloc) && jsonGrow(p,N+7-i)!=0 ) return; - p->zBuf[p->nUsed++] = '\\'; - p->zBuf[p->nUsed++] = 'u'; - p->zBuf[p->nUsed++] = '0'; - p->zBuf[p->nUsed++] = '0'; - p->zBuf[p->nUsed++] = '0' + (c>>4); - c = "0123456789abcdef"[c&0xf]; - } - p->zBuf[p->nUsed++] = c; - } - p->zBuf[p->nUsed++] = '"'; - assert( p->nUsednAlloc ); -} - -/* -** Append a function parameter value to the JSON string under -** construction. -*/ -static void jsonAppendValue( - JsonString *p, /* Append to this JSON string */ - sqlite3_value *pValue /* Value to append */ +static void sessionAppendRecordMerge( + SessionBuffer *pBuf, /* Buffer to append to */ + int nCol, /* Number of columns in each record */ + u8 *a1, int n1, /* Record 1 */ + u8 *a2, int n2, /* Record 2 */ + int *pRc /* IN/OUT: error code */ ){ - switch( sqlite3_value_type(pValue) ){ - case SQLITE_NULL: { - jsonAppendRaw(p, "null", 4); - break; - } - case SQLITE_INTEGER: - case SQLITE_FLOAT: { - const char *z = (const char*)sqlite3_value_text(pValue); - u32 n = (u32)sqlite3_value_bytes(pValue); - jsonAppendRaw(p, z, n); - break; - } - case SQLITE_TEXT: { - const char *z = (const char*)sqlite3_value_text(pValue); - u32 n = (u32)sqlite3_value_bytes(pValue); - if( sqlite3_value_subtype(pValue)==JSON_SUBTYPE ){ - jsonAppendRaw(p, z, n); + sessionBufferGrow(pBuf, n1+n2, pRc); + if( *pRc==SQLITE_OK ){ + int i; + u8 *pOut = &pBuf->aBuf[pBuf->nBuf]; + for(i=0; ibErr==0 ){ - sqlite3_result_error(p->pCtx, "JSON cannot hold BLOB values", -1); - p->bErr = 2; - jsonReset(p); - } - break; - } - } -} - -/* Make the JSON in p the result of the SQL function. -*/ -static void jsonResult(JsonString *p){ - if( p->bErr==0 ){ - sqlite3_result_text64(p->pCtx, p->zBuf, p->nUsed, - p->bStatic ? SQLITE_TRANSIENT : sqlite3_free, - SQLITE_UTF8); - jsonZero(p); + pBuf->nBuf = pOut-pBuf->aBuf; + assert( pBuf->nBuf<=pBuf->nAlloc ); } - assert( p->bStatic ); } -/************************************************************************** -** Utility routines for dealing with JsonNode and JsonParse objects -**************************************************************************/ - /* -** Return the number of consecutive JsonNode slots need to represent -** the parsed JSON at pNode. The minimum answer is 1. For ARRAY and -** OBJECT types, the number might be larger. +** This function is called when rebasing a local UPDATE change against one +** or more remote UPDATE changes. The aRec/nRec buffer contains the current +** old.* and new.* records for the change. The rebase buffer (a single +** record) is in aChange/nChange. The rebased change is appended to buffer +** pBuf. ** -** Appended elements are not counted. The value returned is the number -** by which the JsonNode counter should increment in order to go to the -** next peer value. +** Rebasing the UPDATE involves: +** +** * Removing any changes to fields for which the corresponding field +** in the rebase buffer is set to "replaced" (type 0xFF). If this +** means the UPDATE change updates no fields, nothing is appended +** to the output buffer. +** +** * For each field modified by the local change for which the +** corresponding field in the rebase buffer is not "undefined" (0x00) +** or "replaced" (0xFF), the old.* value is replaced by the value +** in the rebase buffer. */ -static u32 jsonNodeSize(JsonNode *pNode){ - return pNode->eType>=JSON_ARRAY ? pNode->n+1 : 1; -} - -/* -** Reclaim all memory allocated by a JsonParse object. But do not -** delete the JsonParse object itself. -*/ -static void jsonParseReset(JsonParse *pParse){ - sqlite3_free(pParse->aNode); - pParse->aNode = 0; - pParse->nNode = 0; - pParse->nAlloc = 0; - sqlite3_free(pParse->aUp); - pParse->aUp = 0; -} - -/* -** Free a JsonParse object that was obtained from sqlite3_malloc(). -*/ -static void jsonParseFree(JsonParse *pParse){ - jsonParseReset(pParse); - sqlite3_free(pParse); -} - -/* -** Convert the JsonNode pNode into a pure JSON string and -** append to pOut. Subsubstructure is also included. Return -** the number of JsonNode objects that are encoded. -*/ -static void jsonRenderNode( - JsonNode *pNode, /* The node to render */ - JsonString *pOut, /* Write JSON here */ - sqlite3_value **aReplace /* Replacement values */ +static void sessionAppendPartialUpdate( + SessionBuffer *pBuf, /* Append record here */ + sqlite3_changeset_iter *pIter, /* Iterator pointed at local change */ + u8 *aRec, int nRec, /* Local change */ + u8 *aChange, int nChange, /* Record to rebase against */ + int *pRc /* IN/OUT: Return Code */ ){ - if( pNode->jnFlags & (JNODE_REPLACE|JNODE_PATCH) ){ - if( pNode->jnFlags & JNODE_REPLACE ){ - jsonAppendValue(pOut, aReplace[pNode->u.iReplace]); - return; - } - pNode = pNode->u.pPatch; - } - switch( pNode->eType ){ - default: { - assert( pNode->eType==JSON_NULL ); - jsonAppendRaw(pOut, "null", 4); - break; - } - case JSON_TRUE: { - jsonAppendRaw(pOut, "true", 4); - break; - } - case JSON_FALSE: { - jsonAppendRaw(pOut, "false", 5); - break; - } - case JSON_STRING: { - if( pNode->jnFlags & JNODE_RAW ){ - jsonAppendString(pOut, pNode->u.zJContent, pNode->n); - break; - } - /* Fall through into the next case */ - } - case JSON_REAL: - case JSON_INT: { - jsonAppendRaw(pOut, pNode->u.zJContent, pNode->n); - break; - } - case JSON_ARRAY: { - u32 j = 1; - jsonAppendChar(pOut, '['); - for(;;){ - while( j<=pNode->n ){ - if( (pNode[j].jnFlags & JNODE_REMOVE)==0 ){ - jsonAppendSeparator(pOut); - jsonRenderNode(&pNode[j], pOut, aReplace); - } - j += jsonNodeSize(&pNode[j]); - } - if( (pNode->jnFlags & JNODE_APPEND)==0 ) break; - pNode = &pNode[pNode->u.iAppend]; - j = 1; - } - jsonAppendChar(pOut, ']'); - break; - } - case JSON_OBJECT: { - u32 j = 1; - jsonAppendChar(pOut, '{'); - for(;;){ - while( j<=pNode->n ){ - if( (pNode[j+1].jnFlags & JNODE_REMOVE)==0 ){ - jsonAppendSeparator(pOut); - jsonRenderNode(&pNode[j], pOut, aReplace); - jsonAppendChar(pOut, ':'); - jsonRenderNode(&pNode[j+1], pOut, aReplace); - } - j += 1 + jsonNodeSize(&pNode[j+1]); - } - if( (pNode->jnFlags & JNODE_APPEND)==0 ) break; - pNode = &pNode[pNode->u.iAppend]; - j = 1; - } - jsonAppendChar(pOut, '}'); - break; - } - } -} + sessionBufferGrow(pBuf, 2+nRec+nChange, pRc); + if( *pRc==SQLITE_OK ){ + int bData = 0; + u8 *pOut = &pBuf->aBuf[pBuf->nBuf]; + int i; + u8 *a1 = aRec; + u8 *a2 = aChange; -/* -** Return a JsonNode and all its descendents as a JSON string. -*/ -static void jsonReturnJson( - JsonNode *pNode, /* Node to return */ - sqlite3_context *pCtx, /* Return value for this function */ - sqlite3_value **aReplace /* Array of replacement values */ -){ - JsonString s; - jsonInit(&s, pCtx); - jsonRenderNode(pNode, &s, aReplace); - jsonResult(&s); - sqlite3_result_subtype(pCtx, JSON_SUBTYPE); -} - -/* -** Make the JsonNode the return value of the function. -*/ -static void jsonReturn( - JsonNode *pNode, /* Node to return */ - sqlite3_context *pCtx, /* Return value for this function */ - sqlite3_value **aReplace /* Array of replacement values */ -){ - switch( pNode->eType ){ - default: { - assert( pNode->eType==JSON_NULL ); - sqlite3_result_null(pCtx); - break; - } - case JSON_TRUE: { - sqlite3_result_int(pCtx, 1); - break; - } - case JSON_FALSE: { - sqlite3_result_int(pCtx, 0); - break; - } - case JSON_INT: { - sqlite3_int64 i = 0; - const char *z = pNode->u.zJContent; - if( z[0]=='-' ){ z++; } - while( z[0]>='0' && z[0]<='9' ){ - unsigned v = *(z++) - '0'; - if( i>=LARGEST_INT64/10 ){ - if( i>LARGEST_INT64/10 ) goto int_as_real; - if( z[0]>='0' && z[0]<='9' ) goto int_as_real; - if( v==9 ) goto int_as_real; - if( v==8 ){ - if( pNode->u.zJContent[0]=='-' ){ - sqlite3_result_int64(pCtx, SMALLEST_INT64); - goto int_done; - }else{ - goto int_as_real; - } - } - } - i = i*10 + v; + *pOut++ = SQLITE_UPDATE; + *pOut++ = pIter->bIndirect; + for(i=0; inCol; i++){ + int n1 = sessionSerialLen(a1); + int n2 = sessionSerialLen(a2); + if( pIter->abPK[i] || a2[0]==0 ){ + if( !pIter->abPK[i] ) bData = 1; + memcpy(pOut, a1, n1); + pOut += n1; + }else if( a2[0]!=0xFF ){ + bData = 1; + memcpy(pOut, a2, n2); + pOut += n2; + }else{ + *pOut++ = '\0'; } - if( pNode->u.zJContent[0]=='-' ){ i = -i; } - sqlite3_result_int64(pCtx, i); - int_done: - break; - int_as_real: /* fall through to real */; + a1 += n1; + a2 += n2; } - case JSON_REAL: { - double r; -#ifdef SQLITE_AMALGAMATION - const char *z = pNode->u.zJContent; - sqlite3AtoF(z, &r, sqlite3Strlen30(z), SQLITE_UTF8); -#else - r = strtod(pNode->u.zJContent, 0); -#endif - sqlite3_result_double(pCtx, r); - break; - } - case JSON_STRING: { -#if 0 /* Never happens because JNODE_RAW is only set by json_set(), - ** json_insert() and json_replace() and those routines do not - ** call jsonReturn() */ - if( pNode->jnFlags & JNODE_RAW ){ - sqlite3_result_text(pCtx, pNode->u.zJContent, pNode->n, - SQLITE_TRANSIENT); - }else -#endif - assert( (pNode->jnFlags & JNODE_RAW)==0 ); - if( (pNode->jnFlags & JNODE_ESCAPE)==0 ){ - /* JSON formatted without any backslash-escapes */ - sqlite3_result_text(pCtx, pNode->u.zJContent+1, pNode->n-2, - SQLITE_TRANSIENT); - }else{ - /* Translate JSON formatted string into raw text */ - u32 i; - u32 n = pNode->n; - const char *z = pNode->u.zJContent; - char *zOut; - u32 j; - zOut = sqlite3_malloc( n+1 ); - if( zOut==0 ){ - sqlite3_result_error_nomem(pCtx); - break; + if( bData ){ + a2 = aChange; + for(i=0; inCol; i++){ + int n1 = sessionSerialLen(a1); + int n2 = sessionSerialLen(a2); + if( pIter->abPK[i] || a2[0]!=0xFF ){ + memcpy(pOut, a1, n1); + pOut += n1; + }else{ + *pOut++ = '\0'; } - for(i=1, j=0; i>6)); - zOut[j++] = 0x80 | (v&0x3f); - }else{ - zOut[j++] = (char)(0xe0 | (v>>12)); - zOut[j++] = 0x80 | ((v>>6)&0x3f); - zOut[j++] = 0x80 | (v&0x3f); - } - }else{ - if( c=='b' ){ - c = '\b'; - }else if( c=='f' ){ - c = '\f'; - }else if( c=='n' ){ - c = '\n'; - }else if( c=='r' ){ - c = '\r'; - }else if( c=='t' ){ - c = '\t'; - } - zOut[j++] = c; - } - } - } - zOut[j] = 0; - sqlite3_result_text(pCtx, zOut, j, sqlite3_free); + a1 += n1; + a2 += n2; } - break; + pBuf->nBuf = (pOut - pBuf->aBuf); } - case JSON_ARRAY: - case JSON_OBJECT: { - jsonReturnJson(pNode, pCtx, aReplace); - break; - } } } -/* Forward reference */ -static int jsonParseAddNode(JsonParse*,u32,u32,const char*); - /* -** A macro to hint to the compiler that a function should not be -** inlined. +** pIter is configured to iterate through a changeset. This function rebases +** that changeset according to the current configuration of the rebaser +** object passed as the first argument. If no error occurs and argument xOutput +** is not NULL, then the changeset is returned to the caller by invoking +** xOutput zero or more times and SQLITE_OK returned. Or, if xOutput is NULL, +** then (*ppOut) is set to point to a buffer containing the rebased changeset +** before this function returns. In this case (*pnOut) is set to the size of +** the buffer in bytes. It is the responsibility of the caller to eventually +** free the (*ppOut) buffer using sqlite3_free(). +** +** If an error occurs, an SQLite error code is returned. If ppOut and +** pnOut are not NULL, then the two output parameters are set to 0 before +** returning. */ -#if defined(__GNUC__) -# define JSON_NOINLINE __attribute__((noinline)) -#elif defined(_MSC_VER) && _MSC_VER>=1310 -# define JSON_NOINLINE __declspec(noinline) -#else -# define JSON_NOINLINE -#endif - - -static JSON_NOINLINE int jsonParseAddNodeExpand( - JsonParse *pParse, /* Append the node to this object */ - u32 eType, /* Node type */ - u32 n, /* Content size or sub-node count */ - const char *zContent /* Content */ +static int sessionRebase( + sqlite3_rebaser *p, /* Rebaser hash table */ + sqlite3_changeset_iter *pIter, /* Input data */ + int (*xOutput)(void *pOut, const void *pData, int nData), + void *pOut, /* Context for xOutput callback */ + int *pnOut, /* OUT: Number of bytes in output changeset */ + void **ppOut /* OUT: Inverse of pChangeset */ ){ - u32 nNew; - JsonNode *pNew; - assert( pParse->nNode>=pParse->nAlloc ); - if( pParse->oom ) return -1; - nNew = pParse->nAlloc*2 + 10; - pNew = sqlite3_realloc(pParse->aNode, sizeof(JsonNode)*nNew); - if( pNew==0 ){ - pParse->oom = 1; - return -1; - } - pParse->nAlloc = nNew; - pParse->aNode = pNew; - assert( pParse->nNodenAlloc ); - return jsonParseAddNode(pParse, eType, n, zContent); -} + int rc = SQLITE_OK; + u8 *aRec = 0; + int nRec = 0; + int bNew = 0; + SessionTable *pTab = 0; + SessionBuffer sOut = {0,0,0}; -/* -** Create a new JsonNode instance based on the arguments and append that -** instance to the JsonParse. Return the index in pParse->aNode[] of the -** new node, or -1 if a memory allocation fails. -*/ -static int jsonParseAddNode( - JsonParse *pParse, /* Append the node to this object */ - u32 eType, /* Node type */ - u32 n, /* Content size or sub-node count */ - const char *zContent /* Content */ -){ - JsonNode *p; - if( pParse->nNode>=pParse->nAlloc ){ - return jsonParseAddNodeExpand(pParse, eType, n, zContent); - } - p = &pParse->aNode[pParse->nNode]; - p->eType = (u8)eType; - p->jnFlags = 0; - p->n = n; - p->u.zJContent = zContent; - return pParse->nNode++; -} + while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec, &bNew) ){ + SessionChange *pChange = 0; + int bDone = 0; -/* -** Return true if z[] begins with 4 (or more) hexadecimal digits -*/ -static int jsonIs4Hex(const char *z){ - int i; - for(i=0; i<4; i++) if( !safe_isxdigit(z[i]) ) return 0; - return 1; -} - -/* -** Parse a single JSON value which begins at pParse->zJson[i]. Return the -** index of the first character past the end of the value parsed. -** -** Return negative for a syntax error. Special cases: return -2 if the -** first non-whitespace character is '}' and return -3 if the first -** non-whitespace character is ']'. -*/ -static int jsonParseValue(JsonParse *pParse, u32 i){ - char c; - u32 j; - int iThis; - int x; - JsonNode *pNode; - const char *z = pParse->zJson; - while( safe_isspace(z[i]) ){ i++; } - if( (c = z[i])=='{' ){ - /* Parse object */ - iThis = jsonParseAddNode(pParse, JSON_OBJECT, 0, 0); - if( iThis<0 ) return -1; - for(j=i+1;;j++){ - while( safe_isspace(z[j]) ){ j++; } - if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1; - x = jsonParseValue(pParse, j); - if( x<0 ){ - pParse->iDepth--; - if( x==(-2) && pParse->nNode==(u32)iThis+1 ) return j+1; - return -1; + if( bNew ){ + const char *zTab = pIter->zTab; + for(pTab=p->grp.pList; pTab; pTab=pTab->pNext){ + if( 0==sqlite3_stricmp(pTab->zName, zTab) ) break; } - if( pParse->oom ) return -1; - pNode = &pParse->aNode[pParse->nNode-1]; - if( pNode->eType!=JSON_STRING ) return -1; - pNode->jnFlags |= JNODE_LABEL; - j = x; - while( safe_isspace(z[j]) ){ j++; } - if( z[j]!=':' ) return -1; - j++; - x = jsonParseValue(pParse, j); - pParse->iDepth--; - if( x<0 ) return -1; - j = x; - while( safe_isspace(z[j]) ){ j++; } - c = z[j]; - if( c==',' ) continue; - if( c!='}' ) return -1; - break; - } - pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1; - return j+1; - }else if( c=='[' ){ - /* Parse array */ - iThis = jsonParseAddNode(pParse, JSON_ARRAY, 0, 0); - if( iThis<0 ) return -1; - for(j=i+1;;j++){ - while( safe_isspace(z[j]) ){ j++; } - if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1; - x = jsonParseValue(pParse, j); - pParse->iDepth--; - if( x<0 ){ - if( x==(-3) && pParse->nNode==(u32)iThis+1 ) return j+1; - return -1; - } - j = x; - while( safe_isspace(z[j]) ){ j++; } - c = z[j]; - if( c==',' ) continue; - if( c!=']' ) return -1; - break; - } - pParse->aNode[iThis].n = pParse->nNode - (u32)iThis - 1; - return j+1; - }else if( c=='"' ){ - /* Parse string */ - u8 jnFlags = 0; - j = i+1; - for(;;){ - c = z[j]; - if( (c & ~0x1f)==0 ){ - /* Control characters are not allowed in strings */ - return -1; - } - if( c=='\\' ){ - c = z[++j]; - if( c=='"' || c=='\\' || c=='/' || c=='b' || c=='f' - || c=='n' || c=='r' || c=='t' - || (c=='u' && jsonIs4Hex(z+j+1)) ){ - jnFlags = JNODE_ESCAPE; - }else{ - return -1; - } - }else if( c=='"' ){ - break; - } - j++; - } - jsonParseAddNode(pParse, JSON_STRING, j+1-i, &z[i]); - if( !pParse->oom ) pParse->aNode[pParse->nNode-1].jnFlags = jnFlags; - return j+1; - }else if( c=='n' - && strncmp(z+i,"null",4)==0 - && !safe_isalnum(z[i+4]) ){ - jsonParseAddNode(pParse, JSON_NULL, 0, 0); - return i+4; - }else if( c=='t' - && strncmp(z+i,"true",4)==0 - && !safe_isalnum(z[i+4]) ){ - jsonParseAddNode(pParse, JSON_TRUE, 0, 0); - return i+4; - }else if( c=='f' - && strncmp(z+i,"false",5)==0 - && !safe_isalnum(z[i+5]) ){ - jsonParseAddNode(pParse, JSON_FALSE, 0, 0); - return i+5; - }else if( c=='-' || (c>='0' && c<='9') ){ - /* Parse number */ - u8 seenDP = 0; - u8 seenE = 0; - assert( '-' < '0' ); - if( c<='0' ){ - j = c=='-' ? i+1 : i; - if( z[j]=='0' && z[j+1]>='0' && z[j+1]<='9' ) return -1; - } - j = i+1; - for(;; j++){ - c = z[j]; - if( c>='0' && c<='9' ) continue; - if( c=='.' ){ - if( z[j-1]=='-' ) return -1; - if( seenDP ) return -1; - seenDP = 1; - continue; - } - if( c=='e' || c=='E' ){ - if( z[j-1]<'0' ) return -1; - if( seenE ) return -1; - seenDP = seenE = 1; - c = z[j+1]; - if( c=='+' || c=='-' ){ - j++; - c = z[j+1]; - } - if( c<'0' || c>'9' ) return -1; - continue; - } - break; - } - if( z[j-1]<'0' ) return -1; - jsonParseAddNode(pParse, seenDP ? JSON_REAL : JSON_INT, - j - i, &z[i]); - return j; - }else if( c=='}' ){ - return -2; /* End of {...} */ - }else if( c==']' ){ - return -3; /* End of [...] */ - }else if( c==0 ){ - return 0; /* End of file */ - }else{ - return -1; /* Syntax error */ - } -} + bNew = 0; -/* -** Parse a complete JSON string. Return 0 on success or non-zero if there -** are any errors. If an error occurs, free all memory associated with -** pParse. -** -** pParse is uninitialized when this routine is called. -*/ -static int jsonParse( - JsonParse *pParse, /* Initialize and fill this JsonParse object */ - sqlite3_context *pCtx, /* Report errors here */ - const char *zJson /* Input JSON text to be parsed */ -){ - int i; - memset(pParse, 0, sizeof(*pParse)); - if( zJson==0 ) return 1; - pParse->zJson = zJson; - i = jsonParseValue(pParse, 0); - if( pParse->oom ) i = -1; - if( i>0 ){ - assert( pParse->iDepth==0 ); - while( safe_isspace(zJson[i]) ) i++; - if( zJson[i] ) i = -1; - } - if( i<=0 ){ - if( pCtx!=0 ){ - if( pParse->oom ){ - sqlite3_result_error_nomem(pCtx); - }else{ - sqlite3_result_error(pCtx, "malformed JSON", -1); + /* A patchset may not be rebased */ + if( pIter->bPatchset ){ + rc = SQLITE_ERROR; } - } - jsonParseReset(pParse); - return 1; - } - return 0; -} -/* Mark node i of pParse as being a child of iParent. Call recursively -** to fill in all the descendants of node i. -*/ -static void jsonParseFillInParentage(JsonParse *pParse, u32 i, u32 iParent){ - JsonNode *pNode = &pParse->aNode[i]; - u32 j; - pParse->aUp[i] = iParent; - switch( pNode->eType ){ - case JSON_ARRAY: { - for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j)){ - jsonParseFillInParentage(pParse, i+j, i); - } - break; + /* Append a table header to the output for this new table */ + sessionAppendByte(&sOut, pIter->bPatchset ? 'P' : 'T', &rc); + sessionAppendVarint(&sOut, pIter->nCol, &rc); + sessionAppendBlob(&sOut, pIter->abPK, pIter->nCol, &rc); + sessionAppendBlob(&sOut,(u8*)pIter->zTab,(int)strlen(pIter->zTab)+1,&rc); } - case JSON_OBJECT: { - for(j=1; j<=pNode->n; j += jsonNodeSize(pNode+j+1)+1){ - pParse->aUp[i+j] = i; - jsonParseFillInParentage(pParse, i+j+1, i); - } - break; - } - default: { - break; - } - } -} -/* -** Compute the parentage of all nodes in a completed parse. -*/ -static int jsonParseFindParents(JsonParse *pParse){ - u32 *aUp; - assert( pParse->aUp==0 ); - aUp = pParse->aUp = sqlite3_malloc( sizeof(u32)*pParse->nNode ); - if( aUp==0 ){ - pParse->oom = 1; - return SQLITE_NOMEM; - } - jsonParseFillInParentage(pParse, 0, 0); - return SQLITE_OK; -} + if( pTab && rc==SQLITE_OK ){ + int iHash = sessionChangeHash(pTab, 0, aRec, pTab->nChange); -/* -** Magic number used for the JSON parse cache in sqlite3_get_auxdata() -*/ -#define JSON_CACHE_ID (-429938) - -/* -** Obtain a complete parse of the JSON found in the first argument -** of the argv array. Use the sqlite3_get_auxdata() cache for this -** parse if it is available. If the cache is not available or if it -** is no longer valid, parse the JSON again and return the new parse, -** and also register the new parse so that it will be available for -** future sqlite3_get_auxdata() calls. -*/ -static JsonParse *jsonParseCached( - sqlite3_context *pCtx, - sqlite3_value **argv -){ - const char *zJson = (const char*)sqlite3_value_text(argv[0]); - int nJson = sqlite3_value_bytes(argv[0]); - JsonParse *p; - if( zJson==0 ) return 0; - p = (JsonParse*)sqlite3_get_auxdata(pCtx, JSON_CACHE_ID); - if( p && p->nJson==nJson && memcmp(p->zJson,zJson,nJson)==0 ){ - p->nErr = 0; - return p; /* The cached entry matches, so return it */ - } - p = sqlite3_malloc( sizeof(*p) + nJson + 1 ); - if( p==0 ){ - sqlite3_result_error_nomem(pCtx); - return 0; - } - memset(p, 0, sizeof(*p)); - p->zJson = (char*)&p[1]; - memcpy((char*)p->zJson, zJson, nJson+1); - if( jsonParse(p, pCtx, p->zJson) ){ - sqlite3_free(p); - return 0; - } - p->nJson = nJson; - sqlite3_set_auxdata(pCtx, JSON_CACHE_ID, p, (void(*)(void*))jsonParseFree); - return (JsonParse*)sqlite3_get_auxdata(pCtx, JSON_CACHE_ID); -} - -/* -** Compare the OBJECT label at pNode against zKey,nKey. Return true on -** a match. -*/ -static int jsonLabelCompare(JsonNode *pNode, const char *zKey, u32 nKey){ - if( pNode->jnFlags & JNODE_RAW ){ - if( pNode->n!=nKey ) return 0; - return strncmp(pNode->u.zJContent, zKey, nKey)==0; - }else{ - if( pNode->n!=nKey+2 ) return 0; - return strncmp(pNode->u.zJContent+1, zKey, nKey)==0; - } -} - -/* forward declaration */ -static JsonNode *jsonLookupAppend(JsonParse*,const char*,int*,const char**); - -/* -** Search along zPath to find the node specified. Return a pointer -** to that node, or NULL if zPath is malformed or if there is no such -** node. -** -** If pApnd!=0, then try to append new nodes to complete zPath if it is -** possible to do so and if no existing node corresponds to zPath. If -** new nodes are appended *pApnd is set to 1. -*/ -static JsonNode *jsonLookupStep( - JsonParse *pParse, /* The JSON to search */ - u32 iRoot, /* Begin the search at this node */ - const char *zPath, /* The path to search */ - int *pApnd, /* Append nodes to complete path if not NULL */ - const char **pzErr /* Make *pzErr point to any syntax error in zPath */ -){ - u32 i, j, nKey; - const char *zKey; - JsonNode *pRoot = &pParse->aNode[iRoot]; - if( zPath[0]==0 ) return pRoot; - if( zPath[0]=='.' ){ - if( pRoot->eType!=JSON_OBJECT ) return 0; - zPath++; - if( zPath[0]=='"' ){ - zKey = zPath + 1; - for(i=1; zPath[i] && zPath[i]!='"'; i++){} - nKey = i-1; - if( zPath[i] ){ - i++; - }else{ - *pzErr = zPath; - return 0; - } - }else{ - zKey = zPath; - for(i=0; zPath[i] && zPath[i]!='.' && zPath[i]!='['; i++){} - nKey = i; - } - if( nKey==0 ){ - *pzErr = zPath; - return 0; - } - j = 1; - for(;;){ - while( j<=pRoot->n ){ - if( jsonLabelCompare(pRoot+j, zKey, nKey) ){ - return jsonLookupStep(pParse, iRoot+j+1, &zPath[i], pApnd, pzErr); + for(pChange=pTab->apChange[iHash]; pChange; pChange=pChange->pNext){ + if( sessionChangeEqual(pTab, 0, aRec, 0, pChange->aRecord) ){ + break; } - j++; - j += jsonNodeSize(&pRoot[j]); } - if( (pRoot->jnFlags & JNODE_APPEND)==0 ) break; - iRoot += pRoot->u.iAppend; - pRoot = &pParse->aNode[iRoot]; - j = 1; } - if( pApnd ){ - u32 iStart, iLabel; - JsonNode *pNode; - iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0); - iLabel = jsonParseAddNode(pParse, JSON_STRING, i, zPath); - zPath += i; - pNode = jsonLookupAppend(pParse, zPath, pApnd, pzErr); - if( pParse->oom ) return 0; - if( pNode ){ - pRoot = &pParse->aNode[iRoot]; - pRoot->u.iAppend = iStart - iRoot; - pRoot->jnFlags |= JNODE_APPEND; - pParse->aNode[iLabel].jnFlags |= JNODE_RAW; - } - return pNode; - } - }else if( zPath[0]=='[' && safe_isdigit(zPath[1]) ){ - if( pRoot->eType!=JSON_ARRAY ) return 0; - i = 0; - j = 1; - while( safe_isdigit(zPath[j]) ){ - i = i*10 + zPath[j] - '0'; - j++; - } - if( zPath[j]!=']' ){ - *pzErr = zPath; - return 0; - } - zPath += j + 1; - j = 1; - for(;;){ - while( j<=pRoot->n && (i>0 || (pRoot[j].jnFlags & JNODE_REMOVE)!=0) ){ - if( (pRoot[j].jnFlags & JNODE_REMOVE)==0 ) i--; - j += jsonNodeSize(&pRoot[j]); - } - if( (pRoot->jnFlags & JNODE_APPEND)==0 ) break; - iRoot += pRoot->u.iAppend; - pRoot = &pParse->aNode[iRoot]; - j = 1; - } - if( j<=pRoot->n ){ - return jsonLookupStep(pParse, iRoot+j, zPath, pApnd, pzErr); - } - if( i==0 && pApnd ){ - u32 iStart; - JsonNode *pNode; - iStart = jsonParseAddNode(pParse, JSON_ARRAY, 1, 0); - pNode = jsonLookupAppend(pParse, zPath, pApnd, pzErr); - if( pParse->oom ) return 0; - if( pNode ){ - pRoot = &pParse->aNode[iRoot]; - pRoot->u.iAppend = iStart - iRoot; - pRoot->jnFlags |= JNODE_APPEND; - } - return pNode; - } - }else{ - *pzErr = zPath; - } - return 0; -} -/* -** Append content to pParse that will complete zPath. Return a pointer -** to the inserted node, or return NULL if the append fails. -*/ -static JsonNode *jsonLookupAppend( - JsonParse *pParse, /* Append content to the JSON parse */ - const char *zPath, /* Description of content to append */ - int *pApnd, /* Set this flag to 1 */ - const char **pzErr /* Make this point to any syntax error */ -){ - *pApnd = 1; - if( zPath[0]==0 ){ - jsonParseAddNode(pParse, JSON_NULL, 0, 0); - return pParse->oom ? 0 : &pParse->aNode[pParse->nNode-1]; - } - if( zPath[0]=='.' ){ - jsonParseAddNode(pParse, JSON_OBJECT, 0, 0); - }else if( strncmp(zPath,"[0]",3)==0 ){ - jsonParseAddNode(pParse, JSON_ARRAY, 0, 0); - }else{ - return 0; - } - if( pParse->oom ) return 0; - return jsonLookupStep(pParse, pParse->nNode-1, zPath, pApnd, pzErr); -} + if( pChange ){ + assert( pChange->op==SQLITE_DELETE || pChange->op==SQLITE_INSERT ); + switch( pIter->op ){ + case SQLITE_INSERT: + if( pChange->op==SQLITE_INSERT ){ + bDone = 1; + if( pChange->bIndirect==0 ){ + sessionAppendByte(&sOut, SQLITE_UPDATE, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendBlob(&sOut, pChange->aRecord, pChange->nRecord, &rc); + sessionAppendBlob(&sOut, aRec, nRec, &rc); + } + } + break; -/* -** Return the text of a syntax error message on a JSON path. Space is -** obtained from sqlite3_malloc(). -*/ -static char *jsonPathSyntaxError(const char *zErr){ - return sqlite3_mprintf("JSON path error near '%q'", zErr); -} + case SQLITE_UPDATE: + bDone = 1; + if( pChange->op==SQLITE_DELETE ){ + if( pChange->bIndirect==0 ){ + u8 *pCsr = aRec; + sessionSkipRecord(&pCsr, pIter->nCol); + sessionAppendByte(&sOut, SQLITE_INSERT, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendRecordMerge(&sOut, pIter->nCol, + pCsr, nRec-(pCsr-aRec), + pChange->aRecord, pChange->nRecord, &rc + ); + } + }else{ + sessionAppendPartialUpdate(&sOut, pIter, + aRec, nRec, pChange->aRecord, pChange->nRecord, &rc + ); + } + break; -/* -** Do a node lookup using zPath. Return a pointer to the node on success. -** Return NULL if not found or if there is an error. -** -** On an error, write an error message into pCtx and increment the -** pParse->nErr counter. -** -** If pApnd!=NULL then try to append missing nodes and set *pApnd = 1 if -** nodes are appended. -*/ -static JsonNode *jsonLookup( - JsonParse *pParse, /* The JSON to search */ - const char *zPath, /* The path to search */ - int *pApnd, /* Append nodes to complete path if not NULL */ - sqlite3_context *pCtx /* Report errors here, if not NULL */ -){ - const char *zErr = 0; - JsonNode *pNode = 0; - char *zMsg; - - if( zPath==0 ) return 0; - if( zPath[0]!='$' ){ - zErr = zPath; - goto lookup_err; - } - zPath++; - pNode = jsonLookupStep(pParse, 0, zPath, pApnd, &zErr); - if( zErr==0 ) return pNode; - -lookup_err: - pParse->nErr++; - assert( zErr!=0 && pCtx!=0 ); - zMsg = jsonPathSyntaxError(zErr); - if( zMsg ){ - sqlite3_result_error(pCtx, zMsg, -1); - sqlite3_free(zMsg); - }else{ - sqlite3_result_error_nomem(pCtx); - } - return 0; -} - - -/* -** Report the wrong number of arguments for json_insert(), json_replace() -** or json_set(). -*/ -static void jsonWrongNumArgs( - sqlite3_context *pCtx, - const char *zFuncName -){ - char *zMsg = sqlite3_mprintf("json_%s() needs an odd number of arguments", - zFuncName); - sqlite3_result_error(pCtx, zMsg, -1); - sqlite3_free(zMsg); -} - -/* -** Mark all NULL entries in the Object passed in as JNODE_REMOVE. -*/ -static void jsonRemoveAllNulls(JsonNode *pNode){ - int i, n; - assert( pNode->eType==JSON_OBJECT ); - n = pNode->n; - for(i=2; i<=n; i += jsonNodeSize(&pNode[i])+1){ - switch( pNode[i].eType ){ - case JSON_NULL: - pNode[i].jnFlags |= JNODE_REMOVE; - break; - case JSON_OBJECT: - jsonRemoveAllNulls(&pNode[i]); - break; + default: + assert( pIter->op==SQLITE_DELETE ); + bDone = 1; + if( pChange->op==SQLITE_INSERT ){ + sessionAppendByte(&sOut, SQLITE_DELETE, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendRecordMerge(&sOut, pIter->nCol, + pChange->aRecord, pChange->nRecord, aRec, nRec, &rc + ); + } + break; + } } - } -} - -/**************************************************************************** -** SQL functions used for testing and debugging -****************************************************************************/ - -#ifdef SQLITE_DEBUG -/* -** The json_parse(JSON) function returns a string which describes -** a parse of the JSON provided. Or it returns NULL if JSON is not -** well-formed. -*/ -static void jsonParseFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonString s; /* Output string - not real JSON */ - JsonParse x; /* The parse */ - u32 i; - - assert( argc==1 ); - if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; - jsonParseFindParents(&x); - jsonInit(&s, ctx); - for(i=0; iop, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendBlob(&sOut, aRec, nRec, &rc); } - jsonPrintf(100, &s,"node %3u: %7s n=%-4d up=%-4d", - i, zType, x.aNode[i].n, x.aUp[i]); - if( x.aNode[i].u.zJContent!=0 ){ - jsonAppendRaw(&s, " ", 1); - jsonAppendRaw(&s, x.aNode[i].u.zJContent, x.aNode[i].n); + if( rc==SQLITE_OK && xOutput && sOut.nBuf>sessions_strm_chunk_size ){ + rc = xOutput(pOut, sOut.aBuf, sOut.nBuf); + sOut.nBuf = 0; } - jsonAppendRaw(&s, "\n", 1); + if( rc ) break; } - jsonParseReset(&x); - jsonResult(&s); -} -/* -** The json_test1(JSON) function return true (1) if the input is JSON -** text generated by another json function. It returns (0) if the input -** is not known to be JSON. -*/ -static void jsonTest1Func( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - UNUSED_PARAM(argc); - sqlite3_result_int(ctx, sqlite3_value_subtype(argv[0])==JSON_SUBTYPE); -} -#endif /* SQLITE_DEBUG */ - -/**************************************************************************** -** Scalar SQL function implementations -****************************************************************************/ - -/* -** Implementation of the json_QUOTE(VALUE) function. Return a JSON value -** corresponding to the SQL value input. Mostly this means putting -** double-quotes around strings and returning the unquoted string "null" -** when given a NULL input. -*/ -static void jsonQuoteFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonString jx; - UNUSED_PARAM(argc); - - jsonInit(&jx, ctx); - jsonAppendValue(&jx, argv[0]); - jsonResult(&jx); - sqlite3_result_subtype(ctx, JSON_SUBTYPE); -} - -/* -** Implementation of the json_array(VALUE,...) function. Return a JSON -** array that contains all values given in arguments. Or if any argument -** is a BLOB, throw an error. -*/ -static void jsonArrayFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - int i; - JsonString jx; - - jsonInit(&jx, ctx); - jsonAppendChar(&jx, '['); - for(i=0; inNode ); - if( argc==2 ){ - const char *zPath = (const char*)sqlite3_value_text(argv[1]); - pNode = jsonLookup(p, zPath, 0, ctx); - }else{ - pNode = p->aNode; - } - if( pNode==0 ){ - return; - } - if( pNode->eType==JSON_ARRAY ){ - assert( (pNode->jnFlags & JNODE_APPEND)==0 ); - for(i=1; i<=pNode->n; n++){ - i += jsonNodeSize(&pNode[i]); - } - } - sqlite3_result_int64(ctx, n); -} - -/* -** json_extract(JSON, PATH, ...) -** -** Return the element described by PATH. Return NULL if there is no -** PATH element. If there are multiple PATHs, then return a JSON array -** with the result from each path. Throw an error if the JSON or any PATH -** is malformed. -*/ -static void jsonExtractFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonParse *p; /* The parse */ - JsonNode *pNode; - const char *zPath; - JsonString jx; - int i; - - if( argc<2 ) return; - p = jsonParseCached(ctx, argv); - if( p==0 ) return; - jsonInit(&jx, ctx); - jsonAppendChar(&jx, '['); - for(i=1; inErr ) break; - if( argc>2 ){ - jsonAppendSeparator(&jx); - if( pNode ){ - jsonRenderNode(pNode, &jx, 0); - }else{ - jsonAppendRaw(&jx, "null", 4); + if( rc==SQLITE_OK ){ + if( xOutput ){ + if( sOut.nBuf>0 ){ + rc = xOutput(pOut, sOut.aBuf, sOut.nBuf); } - }else if( pNode ){ - jsonReturn(pNode, ctx, 0); + }else{ + *ppOut = (void*)sOut.aBuf; + *pnOut = sOut.nBuf; + sOut.aBuf = 0; } } - if( argc>2 && i==argc ){ - jsonAppendChar(&jx, ']'); - jsonResult(&jx); - sqlite3_result_subtype(ctx, JSON_SUBTYPE); - } - jsonReset(&jx); + sqlite3_free(sOut.aBuf); + return rc; } -/* This is the RFC 7396 MergePatch algorithm. +/* +** Create a new rebaser object. */ -static JsonNode *jsonMergePatch( - JsonParse *pParse, /* The JSON parser that contains the TARGET */ - u32 iTarget, /* Node of the TARGET in pParse */ - JsonNode *pPatch /* The PATCH */ -){ - u32 i, j; - u32 iRoot; - JsonNode *pTarget; - if( pPatch->eType!=JSON_OBJECT ){ - return pPatch; - } - assert( iTarget>=0 && iTargetnNode ); - pTarget = &pParse->aNode[iTarget]; - assert( (pPatch->jnFlags & JNODE_APPEND)==0 ); - if( pTarget->eType!=JSON_OBJECT ){ - jsonRemoveAllNulls(pPatch); - return pPatch; - } - iRoot = iTarget; - for(i=1; in; i += jsonNodeSize(&pPatch[i+1])+1){ - u32 nKey; - const char *zKey; - assert( pPatch[i].eType==JSON_STRING ); - assert( pPatch[i].jnFlags & JNODE_LABEL ); - nKey = pPatch[i].n; - zKey = pPatch[i].u.zJContent; - assert( (pPatch[i].jnFlags & JNODE_RAW)==0 ); - for(j=1; jn; j += jsonNodeSize(&pTarget[j+1])+1 ){ - assert( pTarget[j].eType==JSON_STRING ); - assert( pTarget[j].jnFlags & JNODE_LABEL ); - assert( (pPatch[i].jnFlags & JNODE_RAW)==0 ); - if( pTarget[j].n==nKey && strncmp(pTarget[j].u.zJContent,zKey,nKey)==0 ){ - if( pTarget[j+1].jnFlags & (JNODE_REMOVE|JNODE_PATCH) ) break; - if( pPatch[i+1].eType==JSON_NULL ){ - pTarget[j+1].jnFlags |= JNODE_REMOVE; - }else{ - JsonNode *pNew = jsonMergePatch(pParse, iTarget+j+1, &pPatch[i+1]); - if( pNew==0 ) return 0; - pTarget = &pParse->aNode[iTarget]; - if( pNew!=&pTarget[j+1] ){ - pTarget[j+1].u.pPatch = pNew; - pTarget[j+1].jnFlags |= JNODE_PATCH; - } - } - break; - } - } - if( j>=pTarget->n && pPatch[i+1].eType!=JSON_NULL ){ - int iStart, iPatch; - iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0); - jsonParseAddNode(pParse, JSON_STRING, nKey, zKey); - iPatch = jsonParseAddNode(pParse, JSON_TRUE, 0, 0); - if( pParse->oom ) return 0; - jsonRemoveAllNulls(pPatch); - pTarget = &pParse->aNode[iTarget]; - pParse->aNode[iRoot].jnFlags |= JNODE_APPEND; - pParse->aNode[iRoot].u.iAppend = iStart - iRoot; - iRoot = iStart; - pParse->aNode[iPatch].jnFlags |= JNODE_PATCH; - pParse->aNode[iPatch].u.pPatch = &pPatch[i+1]; - } - } - return pTarget; -} +SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew){ + int rc = SQLITE_OK; + sqlite3_rebaser *pNew; -/* -** Implementation of the json_mergepatch(JSON1,JSON2) function. Return a JSON -** object that is the result of running the RFC 7396 MergePatch() algorithm -** on the two arguments. -*/ -static void jsonPatchFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonParse x; /* The JSON that is being patched */ - JsonParse y; /* The patch */ - JsonNode *pResult; /* The result of the merge */ - - UNUSED_PARAM(argc); - if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; - if( jsonParse(&y, ctx, (const char*)sqlite3_value_text(argv[1])) ){ - jsonParseReset(&x); - return; - } - pResult = jsonMergePatch(&x, 0, y.aNode); - assert( pResult!=0 || x.oom ); - if( pResult ){ - jsonReturnJson(pResult, ctx, 0); + pNew = sqlite3_malloc(sizeof(sqlite3_rebaser)); + if( pNew==0 ){ + rc = SQLITE_NOMEM; }else{ - sqlite3_result_error_nomem(ctx); + memset(pNew, 0, sizeof(sqlite3_rebaser)); } - jsonParseReset(&x); - jsonParseReset(&y); + *ppNew = pNew; + return rc; } - -/* -** Implementation of the json_object(NAME,VALUE,...) function. Return a JSON -** object that contains all name/value given in arguments. Or if any name -** is not a string or if any value is a BLOB, throw an error. +/* +** Call this one or more times to configure a rebaser. */ -static void jsonObjectFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv +SQLITE_API int sqlite3rebaser_configure( + sqlite3_rebaser *p, + int nRebase, const void *pRebase ){ - int i; - JsonString jx; - const char *z; - u32 n; - - if( argc&1 ){ - sqlite3_result_error(ctx, "json_object() requires an even number " - "of arguments", -1); - return; + sqlite3_changeset_iter *pIter = 0; /* Iterator opened on pData/nData */ + int rc; /* Return code */ + rc = sqlite3changeset_start(&pIter, nRebase, (void*)pRebase); + if( rc==SQLITE_OK ){ + rc = sessionChangesetToHash(pIter, &p->grp, 1); } - jsonInit(&jx, ctx); - jsonAppendChar(&jx, '{'); - for(i=0; ijnFlags |= JNODE_REMOVE; + if( rc==SQLITE_OK ){ + rc = sessionRebase(p, pIter, 0, 0, pnOut, ppOut); + sqlite3changeset_finalize(pIter); } - if( (x.aNode[0].jnFlags & JNODE_REMOVE)==0 ){ - jsonReturnJson(x.aNode, ctx, 0); - } -remove_done: - jsonParseReset(&x); -} -/* -** json_replace(JSON, PATH, VALUE, ...) -** -** Replace the value at PATH with VALUE. If PATH does not already exist, -** this routine is a no-op. If JSON or PATH is malformed, throw an error. -*/ -static void jsonReplaceFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonParse x; /* The parse */ - JsonNode *pNode; - const char *zPath; - u32 i; - - if( argc<1 ) return; - if( (argc&1)==0 ) { - jsonWrongNumArgs(ctx, "replace"); - return; - } - if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; - assert( x.nNode ); - for(i=1; i<(u32)argc; i+=2){ - zPath = (const char*)sqlite3_value_text(argv[i]); - pNode = jsonLookup(&x, zPath, 0, ctx); - if( x.nErr ) goto replace_err; - if( pNode ){ - pNode->jnFlags |= (u8)JNODE_REPLACE; - pNode->u.iReplace = i + 1; - } - } - if( x.aNode[0].jnFlags & JNODE_REPLACE ){ - sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]); - }else{ - jsonReturnJson(x.aNode, ctx, argv); - } -replace_err: - jsonParseReset(&x); + return rc; } -/* -** json_set(JSON, PATH, VALUE, ...) -** -** Set the value at PATH to VALUE. Create the PATH if it does not already -** exist. Overwrite existing values that do exist. -** If JSON or PATH is malformed, throw an error. -** -** json_insert(JSON, PATH, VALUE, ...) -** -** Create PATH and initialize it to VALUE. If PATH already exists, this -** routine is a no-op. If JSON or PATH is malformed, throw an error. +/* +** Rebase a changeset according to current rebaser configuration */ -static void jsonSetFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv +SQLITE_API int sqlite3rebaser_rebase_strm( + sqlite3_rebaser *p, + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int (*xOutput)(void *pOut, const void *pData, int nData), + void *pOut ){ - JsonParse x; /* The parse */ - JsonNode *pNode; - const char *zPath; - u32 i; - int bApnd; - int bIsSet = *(int*)sqlite3_user_data(ctx); + sqlite3_changeset_iter *pIter = 0; /* Iterator to skip through input */ + int rc = sqlite3changeset_start_strm(&pIter, xInput, pIn); - if( argc<1 ) return; - if( (argc&1)==0 ) { - jsonWrongNumArgs(ctx, bIsSet ? "set" : "insert"); - return; - } - if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; - assert( x.nNode ); - for(i=1; i<(u32)argc; i+=2){ - zPath = (const char*)sqlite3_value_text(argv[i]); - bApnd = 0; - pNode = jsonLookup(&x, zPath, &bApnd, ctx); - if( x.oom ){ - sqlite3_result_error_nomem(ctx); - goto jsonSetDone; - }else if( x.nErr ){ - goto jsonSetDone; - }else if( pNode && (bApnd || bIsSet) ){ - pNode->jnFlags |= (u8)JNODE_REPLACE; - pNode->u.iReplace = i + 1; - } - } - if( x.aNode[0].jnFlags & JNODE_REPLACE ){ - sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]); - }else{ - jsonReturnJson(x.aNode, ctx, argv); - } -jsonSetDone: - jsonParseReset(&x); -} - -/* -** json_type(JSON) -** json_type(JSON, PATH) -** -** Return the top-level "type" of a JSON string. Throw an error if -** either the JSON or PATH inputs are not well-formed. -*/ -static void jsonTypeFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonParse x; /* The parse */ - const char *zPath; - JsonNode *pNode; - - if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; - assert( x.nNode ); - if( argc==2 ){ - zPath = (const char*)sqlite3_value_text(argv[1]); - pNode = jsonLookup(&x, zPath, 0, ctx); - }else{ - pNode = x.aNode; - } - if( pNode ){ - sqlite3_result_text(ctx, jsonType[pNode->eType], -1, SQLITE_STATIC); - } - jsonParseReset(&x); -} - -/* -** json_valid(JSON) -** -** Return 1 if JSON is a well-formed JSON string according to RFC-7159. -** Return 0 otherwise. -*/ -static void jsonValidFunc( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonParse x; /* The parse */ - int rc = 0; - - UNUSED_PARAM(argc); - if( jsonParse(&x, 0, (const char*)sqlite3_value_text(argv[0]))==0 ){ - rc = 1; - } - jsonParseReset(&x); - sqlite3_result_int(ctx, rc); -} - - -/**************************************************************************** -** Aggregate SQL function implementations -****************************************************************************/ -/* -** json_group_array(VALUE) -** -** Return a JSON array composed of all values in the aggregate. -*/ -static void jsonArrayStep( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonString *pStr; - UNUSED_PARAM(argc); - pStr = (JsonString*)sqlite3_aggregate_context(ctx, sizeof(*pStr)); - if( pStr ){ - if( pStr->zBuf==0 ){ - jsonInit(pStr, ctx); - jsonAppendChar(pStr, '['); - }else{ - jsonAppendChar(pStr, ','); - pStr->pCtx = ctx; - } - jsonAppendValue(pStr, argv[0]); - } -} -static void jsonArrayFinal(sqlite3_context *ctx){ - JsonString *pStr; - pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0); - if( pStr ){ - pStr->pCtx = ctx; - jsonAppendChar(pStr, ']'); - if( pStr->bErr ){ - if( pStr->bErr==1 ) sqlite3_result_error_nomem(ctx); - assert( pStr->bStatic ); - }else{ - sqlite3_result_text(ctx, pStr->zBuf, pStr->nUsed, - pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free); - pStr->bStatic = 1; - } - }else{ - sqlite3_result_text(ctx, "[]", 2, SQLITE_STATIC); - } - sqlite3_result_subtype(ctx, JSON_SUBTYPE); -} - -/* -** json_group_obj(NAME,VALUE) -** -** Return a JSON object composed of all names and values in the aggregate. -*/ -static void jsonObjectStep( - sqlite3_context *ctx, - int argc, - sqlite3_value **argv -){ - JsonString *pStr; - const char *z; - u32 n; - UNUSED_PARAM(argc); - pStr = (JsonString*)sqlite3_aggregate_context(ctx, sizeof(*pStr)); - if( pStr ){ - if( pStr->zBuf==0 ){ - jsonInit(pStr, ctx); - jsonAppendChar(pStr, '{'); - }else{ - jsonAppendChar(pStr, ','); - pStr->pCtx = ctx; - } - z = (const char*)sqlite3_value_text(argv[0]); - n = (u32)sqlite3_value_bytes(argv[0]); - jsonAppendString(pStr, z, n); - jsonAppendChar(pStr, ':'); - jsonAppendValue(pStr, argv[1]); - } -} -static void jsonObjectFinal(sqlite3_context *ctx){ - JsonString *pStr; - pStr = (JsonString*)sqlite3_aggregate_context(ctx, 0); - if( pStr ){ - jsonAppendChar(pStr, '}'); - if( pStr->bErr ){ - if( pStr->bErr==1 ) sqlite3_result_error_nomem(ctx); - assert( pStr->bStatic ); - }else{ - sqlite3_result_text(ctx, pStr->zBuf, pStr->nUsed, - pStr->bStatic ? SQLITE_TRANSIENT : sqlite3_free); - pStr->bStatic = 1; - } - }else{ - sqlite3_result_text(ctx, "{}", 2, SQLITE_STATIC); - } - sqlite3_result_subtype(ctx, JSON_SUBTYPE); -} - - -#ifndef SQLITE_OMIT_VIRTUALTABLE -/**************************************************************************** -** The json_each virtual table -****************************************************************************/ -typedef struct JsonEachCursor JsonEachCursor; -struct JsonEachCursor { - sqlite3_vtab_cursor base; /* Base class - must be first */ - u32 iRowid; /* The rowid */ - u32 iBegin; /* The first node of the scan */ - u32 i; /* Index in sParse.aNode[] of current row */ - u32 iEnd; /* EOF when i equals or exceeds this value */ - u8 eType; /* Type of top-level element */ - u8 bRecursive; /* True for json_tree(). False for json_each() */ - char *zJson; /* Input JSON */ - char *zRoot; /* Path by which to filter zJson */ - JsonParse sParse; /* Parse of the input JSON */ -}; - -/* Constructor for the json_each virtual table */ -static int jsonEachConnect( - sqlite3 *db, - void *pAux, - int argc, const char *const*argv, - sqlite3_vtab **ppVtab, - char **pzErr -){ - sqlite3_vtab *pNew; - int rc; - -/* Column numbers */ -#define JEACH_KEY 0 -#define JEACH_VALUE 1 -#define JEACH_TYPE 2 -#define JEACH_ATOM 3 -#define JEACH_ID 4 -#define JEACH_PARENT 5 -#define JEACH_FULLKEY 6 -#define JEACH_PATH 7 -#define JEACH_JSON 8 -#define JEACH_ROOT 9 - - UNUSED_PARAM(pzErr); - UNUSED_PARAM(argv); - UNUSED_PARAM(argc); - UNUSED_PARAM(pAux); - rc = sqlite3_declare_vtab(db, - "CREATE TABLE x(key,value,type,atom,id,parent,fullkey,path," - "json HIDDEN,root HIDDEN)"); if( rc==SQLITE_OK ){ - pNew = *ppVtab = sqlite3_malloc( sizeof(*pNew) ); - if( pNew==0 ) return SQLITE_NOMEM; - memset(pNew, 0, sizeof(*pNew)); + rc = sessionRebase(p, pIter, xOutput, pOut, 0, 0); + sqlite3changeset_finalize(pIter); } - return rc; -} -/* destructor for json_each virtual table */ -static int jsonEachDisconnect(sqlite3_vtab *pVtab){ - sqlite3_free(pVtab); - return SQLITE_OK; -} - -/* constructor for a JsonEachCursor object for json_each(). */ -static int jsonEachOpenEach(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCursor){ - JsonEachCursor *pCur; - - UNUSED_PARAM(p); - pCur = sqlite3_malloc( sizeof(*pCur) ); - if( pCur==0 ) return SQLITE_NOMEM; - memset(pCur, 0, sizeof(*pCur)); - *ppCursor = &pCur->base; - return SQLITE_OK; -} - -/* constructor for a JsonEachCursor object for json_tree(). */ -static int jsonEachOpenTree(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCursor){ - int rc = jsonEachOpenEach(p, ppCursor); - if( rc==SQLITE_OK ){ - JsonEachCursor *pCur = (JsonEachCursor*)*ppCursor; - pCur->bRecursive = 1; - } return rc; } -/* Reset a JsonEachCursor back to its original state. Free any memory -** held. */ -static void jsonEachCursorReset(JsonEachCursor *p){ - sqlite3_free(p->zJson); - sqlite3_free(p->zRoot); - jsonParseReset(&p->sParse); - p->iRowid = 0; - p->i = 0; - p->iEnd = 0; - p->eType = 0; - p->zJson = 0; - p->zRoot = 0; -} - -/* Destructor for a jsonEachCursor object */ -static int jsonEachClose(sqlite3_vtab_cursor *cur){ - JsonEachCursor *p = (JsonEachCursor*)cur; - jsonEachCursorReset(p); - sqlite3_free(cur); - return SQLITE_OK; -} - -/* Return TRUE if the jsonEachCursor object has been advanced off the end -** of the JSON object */ -static int jsonEachEof(sqlite3_vtab_cursor *cur){ - JsonEachCursor *p = (JsonEachCursor*)cur; - return p->i >= p->iEnd; -} - -/* Advance the cursor to the next element for json_tree() */ -static int jsonEachNext(sqlite3_vtab_cursor *cur){ - JsonEachCursor *p = (JsonEachCursor*)cur; - if( p->bRecursive ){ - if( p->sParse.aNode[p->i].jnFlags & JNODE_LABEL ) p->i++; - p->i++; - p->iRowid++; - if( p->iiEnd ){ - u32 iUp = p->sParse.aUp[p->i]; - JsonNode *pUp = &p->sParse.aNode[iUp]; - p->eType = pUp->eType; - if( pUp->eType==JSON_ARRAY ){ - if( iUp==p->i-1 ){ - pUp->u.iKey = 0; - }else{ - pUp->u.iKey++; - } - } - } - }else{ - switch( p->eType ){ - case JSON_ARRAY: { - p->i += jsonNodeSize(&p->sParse.aNode[p->i]); - p->iRowid++; - break; - } - case JSON_OBJECT: { - p->i += 1 + jsonNodeSize(&p->sParse.aNode[p->i+1]); - p->iRowid++; - break; - } - default: { - p->i = p->iEnd; - break; - } - } +/* +** Destroy a rebaser object +*/ +SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p){ + if( p ){ + sessionDeleteTable(p->grp.pList); + sqlite3_free(p); } - return SQLITE_OK; } -/* Append the name of the path for element i to pStr +/* +** Global configuration */ -static void jsonEachComputePath( - JsonEachCursor *p, /* The cursor */ - JsonString *pStr, /* Write the path here */ - u32 i /* Path to this element */ -){ - JsonNode *pNode, *pUp; - u32 iUp; - if( i==0 ){ - jsonAppendChar(pStr, '$'); - return; - } - iUp = p->sParse.aUp[i]; - jsonEachComputePath(p, pStr, iUp); - pNode = &p->sParse.aNode[i]; - pUp = &p->sParse.aNode[iUp]; - if( pUp->eType==JSON_ARRAY ){ - jsonPrintf(30, pStr, "[%d]", pUp->u.iKey); - }else{ - assert( pUp->eType==JSON_OBJECT ); - if( (pNode->jnFlags & JNODE_LABEL)==0 ) pNode--; - assert( pNode->eType==JSON_STRING ); - assert( pNode->jnFlags & JNODE_LABEL ); - jsonPrintf(pNode->n+1, pStr, ".%.*s", pNode->n-2, pNode->u.zJContent+1); - } -} - -/* Return the value of a column */ -static int jsonEachColumn( - sqlite3_vtab_cursor *cur, /* The cursor */ - sqlite3_context *ctx, /* First argument to sqlite3_result_...() */ - int i /* Which column to return */ -){ - JsonEachCursor *p = (JsonEachCursor*)cur; - JsonNode *pThis = &p->sParse.aNode[p->i]; - switch( i ){ - case JEACH_KEY: { - if( p->i==0 ) break; - if( p->eType==JSON_OBJECT ){ - jsonReturn(pThis, ctx, 0); - }else if( p->eType==JSON_ARRAY ){ - u32 iKey; - if( p->bRecursive ){ - if( p->iRowid==0 ) break; - iKey = p->sParse.aNode[p->sParse.aUp[p->i]].u.iKey; - }else{ - iKey = p->iRowid; - } - sqlite3_result_int64(ctx, (sqlite3_int64)iKey); +SQLITE_API int sqlite3session_config(int op, void *pArg){ + int rc = SQLITE_OK; + switch( op ){ + case SQLITE_SESSION_CONFIG_STRMSIZE: { + int *pInt = (int*)pArg; + if( *pInt>0 ){ + sessions_strm_chunk_size = *pInt; } + *pInt = sessions_strm_chunk_size; break; } - case JEACH_VALUE: { - if( pThis->jnFlags & JNODE_LABEL ) pThis++; - jsonReturn(pThis, ctx, 0); + default: + rc = SQLITE_MISUSE; break; - } - case JEACH_TYPE: { - if( pThis->jnFlags & JNODE_LABEL ) pThis++; - sqlite3_result_text(ctx, jsonType[pThis->eType], -1, SQLITE_STATIC); - break; - } - case JEACH_ATOM: { - if( pThis->jnFlags & JNODE_LABEL ) pThis++; - if( pThis->eType>=JSON_ARRAY ) break; - jsonReturn(pThis, ctx, 0); - break; - } - case JEACH_ID: { - sqlite3_result_int64(ctx, - (sqlite3_int64)p->i + ((pThis->jnFlags & JNODE_LABEL)!=0)); - break; - } - case JEACH_PARENT: { - if( p->i>p->iBegin && p->bRecursive ){ - sqlite3_result_int64(ctx, (sqlite3_int64)p->sParse.aUp[p->i]); - } - break; - } - case JEACH_FULLKEY: { - JsonString x; - jsonInit(&x, ctx); - if( p->bRecursive ){ - jsonEachComputePath(p, &x, p->i); - }else{ - if( p->zRoot ){ - jsonAppendRaw(&x, p->zRoot, (int)strlen(p->zRoot)); - }else{ - jsonAppendChar(&x, '$'); - } - if( p->eType==JSON_ARRAY ){ - jsonPrintf(30, &x, "[%d]", p->iRowid); - }else{ - jsonPrintf(pThis->n, &x, ".%.*s", pThis->n-2, pThis->u.zJContent+1); - } - } - jsonResult(&x); - break; - } - case JEACH_PATH: { - if( p->bRecursive ){ - JsonString x; - jsonInit(&x, ctx); - jsonEachComputePath(p, &x, p->sParse.aUp[p->i]); - jsonResult(&x); - break; - } - /* For json_each() path and root are the same so fall through - ** into the root case */ - } - default: { - const char *zRoot = p->zRoot; - if( zRoot==0 ) zRoot = "$"; - sqlite3_result_text(ctx, zRoot, -1, SQLITE_STATIC); - break; - } - case JEACH_JSON: { - assert( i==JEACH_JSON ); - sqlite3_result_text(ctx, p->sParse.zJson, -1, SQLITE_STATIC); - break; - } } - return SQLITE_OK; -} - -/* Return the current rowid value */ -static int jsonEachRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ - JsonEachCursor *p = (JsonEachCursor*)cur; - *pRowid = p->iRowid; - return SQLITE_OK; -} - -/* The query strategy is to look for an equality constraint on the json -** column. Without such a constraint, the table cannot operate. idxNum is -** 1 if the constraint is found, 3 if the constraint and zRoot are found, -** and 0 otherwise. -*/ -static int jsonEachBestIndex( - sqlite3_vtab *tab, - sqlite3_index_info *pIdxInfo -){ - int i; - int jsonIdx = -1; - int rootIdx = -1; - const struct sqlite3_index_constraint *pConstraint; - - UNUSED_PARAM(tab); - pConstraint = pIdxInfo->aConstraint; - for(i=0; inConstraint; i++, pConstraint++){ - if( pConstraint->usable==0 ) continue; - if( pConstraint->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue; - switch( pConstraint->iColumn ){ - case JEACH_JSON: jsonIdx = i; break; - case JEACH_ROOT: rootIdx = i; break; - default: /* no-op */ break; - } - } - if( jsonIdx<0 ){ - pIdxInfo->idxNum = 0; - pIdxInfo->estimatedCost = 1e99; - }else{ - pIdxInfo->estimatedCost = 1.0; - pIdxInfo->aConstraintUsage[jsonIdx].argvIndex = 1; - pIdxInfo->aConstraintUsage[jsonIdx].omit = 1; - if( rootIdx<0 ){ - pIdxInfo->idxNum = 1; - }else{ - pIdxInfo->aConstraintUsage[rootIdx].argvIndex = 2; - pIdxInfo->aConstraintUsage[rootIdx].omit = 1; - pIdxInfo->idxNum = 3; - } - } - return SQLITE_OK; -} - -/* Start a search on a new JSON string */ -static int jsonEachFilter( - sqlite3_vtab_cursor *cur, - int idxNum, const char *idxStr, - int argc, sqlite3_value **argv -){ - JsonEachCursor *p = (JsonEachCursor*)cur; - const char *z; - const char *zRoot = 0; - sqlite3_int64 n; - - UNUSED_PARAM(idxStr); - UNUSED_PARAM(argc); - jsonEachCursorReset(p); - if( idxNum==0 ) return SQLITE_OK; - z = (const char*)sqlite3_value_text(argv[0]); - if( z==0 ) return SQLITE_OK; - n = sqlite3_value_bytes(argv[0]); - p->zJson = sqlite3_malloc64( n+1 ); - if( p->zJson==0 ) return SQLITE_NOMEM; - memcpy(p->zJson, z, (size_t)n+1); - if( jsonParse(&p->sParse, 0, p->zJson) ){ - int rc = SQLITE_NOMEM; - if( p->sParse.oom==0 ){ - sqlite3_free(cur->pVtab->zErrMsg); - cur->pVtab->zErrMsg = sqlite3_mprintf("malformed JSON"); - if( cur->pVtab->zErrMsg ) rc = SQLITE_ERROR; - } - jsonEachCursorReset(p); - return rc; - }else if( p->bRecursive && jsonParseFindParents(&p->sParse) ){ - jsonEachCursorReset(p); - return SQLITE_NOMEM; - }else{ - JsonNode *pNode = 0; - if( idxNum==3 ){ - const char *zErr = 0; - zRoot = (const char*)sqlite3_value_text(argv[1]); - if( zRoot==0 ) return SQLITE_OK; - n = sqlite3_value_bytes(argv[1]); - p->zRoot = sqlite3_malloc64( n+1 ); - if( p->zRoot==0 ) return SQLITE_NOMEM; - memcpy(p->zRoot, zRoot, (size_t)n+1); - if( zRoot[0]!='$' ){ - zErr = zRoot; - }else{ - pNode = jsonLookupStep(&p->sParse, 0, p->zRoot+1, 0, &zErr); - } - if( zErr ){ - sqlite3_free(cur->pVtab->zErrMsg); - cur->pVtab->zErrMsg = jsonPathSyntaxError(zErr); - jsonEachCursorReset(p); - return cur->pVtab->zErrMsg ? SQLITE_ERROR : SQLITE_NOMEM; - }else if( pNode==0 ){ - return SQLITE_OK; - } - }else{ - pNode = p->sParse.aNode; - } - p->iBegin = p->i = (int)(pNode - p->sParse.aNode); - p->eType = pNode->eType; - if( p->eType>=JSON_ARRAY ){ - pNode->u.iKey = 0; - p->iEnd = p->i + pNode->n + 1; - if( p->bRecursive ){ - p->eType = p->sParse.aNode[p->sParse.aUp[p->i]].eType; - if( p->i>0 && (p->sParse.aNode[p->i-1].jnFlags & JNODE_LABEL)!=0 ){ - p->i--; - } - }else{ - p->i++; - } - }else{ - p->iEnd = p->i+1; - } - } - return SQLITE_OK; -} - -/* The methods of the json_each virtual table */ -static sqlite3_module jsonEachModule = { - 0, /* iVersion */ - 0, /* xCreate */ - jsonEachConnect, /* xConnect */ - jsonEachBestIndex, /* xBestIndex */ - jsonEachDisconnect, /* xDisconnect */ - 0, /* xDestroy */ - jsonEachOpenEach, /* xOpen - open a cursor */ - jsonEachClose, /* xClose - close a cursor */ - jsonEachFilter, /* xFilter - configure scan constraints */ - jsonEachNext, /* xNext - advance a cursor */ - jsonEachEof, /* xEof - check for end of scan */ - jsonEachColumn, /* xColumn - read data */ - jsonEachRowid, /* xRowid - read data */ - 0, /* xUpdate */ - 0, /* xBegin */ - 0, /* xSync */ - 0, /* xCommit */ - 0, /* xRollback */ - 0, /* xFindMethod */ - 0, /* xRename */ - 0, /* xSavepoint */ - 0, /* xRelease */ - 0 /* xRollbackTo */ -}; - -/* The methods of the json_tree virtual table. */ -static sqlite3_module jsonTreeModule = { - 0, /* iVersion */ - 0, /* xCreate */ - jsonEachConnect, /* xConnect */ - jsonEachBestIndex, /* xBestIndex */ - jsonEachDisconnect, /* xDisconnect */ - 0, /* xDestroy */ - jsonEachOpenTree, /* xOpen - open a cursor */ - jsonEachClose, /* xClose - close a cursor */ - jsonEachFilter, /* xFilter - configure scan constraints */ - jsonEachNext, /* xNext - advance a cursor */ - jsonEachEof, /* xEof - check for end of scan */ - jsonEachColumn, /* xColumn - read data */ - jsonEachRowid, /* xRowid - read data */ - 0, /* xUpdate */ - 0, /* xBegin */ - 0, /* xSync */ - 0, /* xCommit */ - 0, /* xRollback */ - 0, /* xFindMethod */ - 0, /* xRename */ - 0, /* xSavepoint */ - 0, /* xRelease */ - 0 /* xRollbackTo */ -}; -#endif /* SQLITE_OMIT_VIRTUALTABLE */ - -/**************************************************************************** -** The following routines are the only publically visible identifiers in this -** file. Call the following routines in order to register the various SQL -** functions and the virtual table implemented by this file. -****************************************************************************/ - -SQLITE_PRIVATE int sqlite3Json1Init(sqlite3 *db){ - int rc = SQLITE_OK; - unsigned int i; - static const struct { - const char *zName; - int nArg; - int flag; - void (*xFunc)(sqlite3_context*,int,sqlite3_value**); - } aFunc[] = { - { "json", 1, 0, jsonRemoveFunc }, - { "json_array", -1, 0, jsonArrayFunc }, - { "json_array_length", 1, 0, jsonArrayLengthFunc }, - { "json_array_length", 2, 0, jsonArrayLengthFunc }, - { "json_extract", -1, 0, jsonExtractFunc }, - { "json_insert", -1, 0, jsonSetFunc }, - { "json_object", -1, 0, jsonObjectFunc }, - { "json_patch", 2, 0, jsonPatchFunc }, - { "json_quote", 1, 0, jsonQuoteFunc }, - { "json_remove", -1, 0, jsonRemoveFunc }, - { "json_replace", -1, 0, jsonReplaceFunc }, - { "json_set", -1, 1, jsonSetFunc }, - { "json_type", 1, 0, jsonTypeFunc }, - { "json_type", 2, 0, jsonTypeFunc }, - { "json_valid", 1, 0, jsonValidFunc }, - -#if SQLITE_DEBUG - /* DEBUG and TESTING functions */ - { "json_parse", 1, 0, jsonParseFunc }, - { "json_test1", 1, 0, jsonTest1Func }, -#endif - }; - static const struct { - const char *zName; - int nArg; - void (*xStep)(sqlite3_context*,int,sqlite3_value**); - void (*xFinal)(sqlite3_context*); - } aAgg[] = { - { "json_group_array", 1, jsonArrayStep, jsonArrayFinal }, - { "json_group_object", 2, jsonObjectStep, jsonObjectFinal }, - }; -#ifndef SQLITE_OMIT_VIRTUALTABLE - static const struct { - const char *zName; - sqlite3_module *pModule; - } aMod[] = { - { "json_each", &jsonEachModule }, - { "json_tree", &jsonTreeModule }, - }; -#endif - for(i=0; i ** @@ -183519,7 +198822,7 @@ ** extra data to the FTS index or require FTS5 to query for multiple terms, ** so it is efficient in terms of disk space and query speed. However, it ** does not support prefix queries very well. If, as suggested above, the -** token "first" is subsituted for "1st" by the tokenizer, then the query: +** token "first" is substituted for "1st" by the tokenizer, then the query: ** ** ** ... MATCH '1s*' @@ -184349,6 +199652,8 @@ int bPrefix ); +static void sqlite3Fts5ParseSetCaret(Fts5ExprPhrase*); + static Fts5ExprNearset *sqlite3Fts5ParseNearset( Fts5Parse*, Fts5ExprNearset*, @@ -184409,9 +199714,12 @@ /************************************************************************** ** Interface to automatically generated code in fts5_unicode2.c. */ -static int sqlite3Fts5UnicodeIsalnum(int c); static int sqlite3Fts5UnicodeIsdiacritic(int c); static int sqlite3Fts5UnicodeFold(int c, int bRemoveDiacritic); + +static int sqlite3Fts5UnicodeCatParse(const char*, u8*); +static int sqlite3Fts5UnicodeCategory(int iCode); +static void sqlite3Fts5UnicodeAscii(u8*, u8*); /* ** End of interface to code in fts5_unicode2.c. **************************************************************************/ @@ -184429,9 +199737,10 @@ #define FTS5_STRING 9 #define FTS5_LP 10 #define FTS5_RP 11 -#define FTS5_COMMA 12 -#define FTS5_PLUS 13 -#define FTS5_STAR 14 +#define FTS5_CARET 12 +#define FTS5_COMMA 13 +#define FTS5_PLUS 14 +#define FTS5_STAR 15 /* ** 2000-05-29 @@ -184458,6 +199767,7 @@ ** input grammar file: */ /* #include */ +/* #include */ /************ Begin %include sections from the grammar ************************/ /* #include "fts5Int.h" */ @@ -184526,19 +199836,23 @@ ** zero the stack is dynamically sized using realloc() ** sqlite3Fts5ParserARG_SDECL A static variable declaration for the %extra_argument ** sqlite3Fts5ParserARG_PDECL A parameter declaration for the %extra_argument +** sqlite3Fts5ParserARG_PARAM Code to pass %extra_argument as a subroutine parameter ** sqlite3Fts5ParserARG_STORE Code to store %extra_argument into fts5yypParser ** sqlite3Fts5ParserARG_FETCH Code to extract %extra_argument from fts5yypParser +** sqlite3Fts5ParserCTX_* As sqlite3Fts5ParserARG_ except for %extra_context ** fts5YYERRORSYMBOL is the code number of the error symbol. If not ** defined, then do no error processing. ** fts5YYNSTATE the combined number of states. ** fts5YYNRULE the number of rules in the grammar +** fts5YYNFTS5TOKEN Number of terminal symbols ** fts5YY_MAX_SHIFT Maximum value for shift actions ** fts5YY_MIN_SHIFTREDUCE Minimum value for shift-reduce actions ** fts5YY_MAX_SHIFTREDUCE Maximum value for shift-reduce actions -** fts5YY_MIN_REDUCE Maximum value for reduce actions ** fts5YY_ERROR_ACTION The fts5yy_action[] code for syntax error ** fts5YY_ACCEPT_ACTION The fts5yy_action[] code for accept ** fts5YY_NO_ACTION The fts5yy_action[] code for no-op +** fts5YY_MIN_REDUCE Minimum value for reduce actions +** fts5YY_MAX_REDUCE Maximum value for reduce actions */ #ifndef INTERFACE # define INTERFACE 1 @@ -184545,7 +199859,7 @@ #endif /************* Begin control #defines *****************************************/ #define fts5YYCODETYPE unsigned char -#define fts5YYNOCODE 28 +#define fts5YYNOCODE 27 #define fts5YYACTIONTYPE unsigned char #define sqlite3Fts5ParserFTS5TOKENTYPE Fts5Token typedef union { @@ -184562,19 +199876,27 @@ #endif #define sqlite3Fts5ParserARG_SDECL Fts5Parse *pParse; #define sqlite3Fts5ParserARG_PDECL ,Fts5Parse *pParse -#define sqlite3Fts5ParserARG_FETCH Fts5Parse *pParse = fts5yypParser->pParse -#define sqlite3Fts5ParserARG_STORE fts5yypParser->pParse = pParse -#define fts5YYNSTATE 33 -#define fts5YYNRULE 27 -#define fts5YY_MAX_SHIFT 32 -#define fts5YY_MIN_SHIFTREDUCE 50 -#define fts5YY_MAX_SHIFTREDUCE 76 -#define fts5YY_MIN_REDUCE 77 -#define fts5YY_MAX_REDUCE 103 -#define fts5YY_ERROR_ACTION 104 -#define fts5YY_ACCEPT_ACTION 105 -#define fts5YY_NO_ACTION 106 +#define sqlite3Fts5ParserARG_PARAM ,pParse +#define sqlite3Fts5ParserARG_FETCH Fts5Parse *pParse=fts5yypParser->pParse; +#define sqlite3Fts5ParserARG_STORE fts5yypParser->pParse=pParse; +#define sqlite3Fts5ParserCTX_SDECL +#define sqlite3Fts5ParserCTX_PDECL +#define sqlite3Fts5ParserCTX_PARAM +#define sqlite3Fts5ParserCTX_FETCH +#define sqlite3Fts5ParserCTX_STORE +#define fts5YYNSTATE 35 +#define fts5YYNRULE 28 +#define fts5YYNFTS5TOKEN 16 +#define fts5YY_MAX_SHIFT 34 +#define fts5YY_MIN_SHIFTREDUCE 52 +#define fts5YY_MAX_SHIFTREDUCE 79 +#define fts5YY_ERROR_ACTION 80 +#define fts5YY_ACCEPT_ACTION 81 +#define fts5YY_NO_ACTION 82 +#define fts5YY_MIN_REDUCE 83 +#define fts5YY_MAX_REDUCE 110 /************* End control #defines *******************************************/ +#define fts5YY_NLOOKAHEAD ((int)(sizeof(fts5yy_lookahead)/sizeof(fts5yy_lookahead[0]))) /* Define the fts5yytestcase() macro to be a no-op if is not already defined ** otherwise. @@ -184603,9 +199925,6 @@ ** N between fts5YY_MIN_SHIFTREDUCE Shift to an arbitrary state then ** and fts5YY_MAX_SHIFTREDUCE reduce by rule N-fts5YY_MIN_SHIFTREDUCE. ** -** N between fts5YY_MIN_REDUCE Reduce by rule N-fts5YY_MIN_REDUCE -** and fts5YY_MAX_REDUCE -** ** N == fts5YY_ERROR_ACTION A syntax error has occurred. ** ** N == fts5YY_ACCEPT_ACTION The parser accepts its input. @@ -184613,6 +199932,9 @@ ** N == fts5YY_NO_ACTION No such action. Denotes unused ** slots in the fts5yy_action[] table. ** +** N between fts5YY_MIN_REDUCE Reduce by rule N-fts5YY_MIN_REDUCE +** and fts5YY_MAX_REDUCE +** ** The action table is constructed as a single large table named fts5yy_action[]. ** Given state S and lookahead X, the action is computed as either: ** @@ -184619,19 +199941,13 @@ ** (A) N = fts5yy_action[ fts5yy_shift_ofst[S] + X ] ** (B) N = fts5yy_default[S] ** -** The (A) formula is preferred. The B formula is used instead if: -** (1) The fts5yy_shift_ofst[S]+X value is out of range, or -** (2) fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X, or -** (3) fts5yy_shift_ofst[S] equal fts5YY_SHIFT_USE_DFLT. -** (Implementation note: fts5YY_SHIFT_USE_DFLT is chosen so that -** fts5YY_SHIFT_USE_DFLT+X will be out of range for all possible lookaheads X. -** Hence only tests (1) and (2) need to be evaluated.) +** The (A) formula is preferred. The B formula is used instead if +** fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X. ** ** The formulas above are for computing the action when the lookahead is ** a terminal symbol. If the lookahead is a non-terminal (as occurs after ** a reduce action) then the fts5yy_reduce_ofst[] array is used in place of -** the fts5yy_shift_ofst[] array and fts5YY_REDUCE_USE_DFLT is used in place of -** fts5YY_SHIFT_USE_DFLT. +** the fts5yy_shift_ofst[] array. ** ** The following are the tables generated in this section: ** @@ -184645,54 +199961,56 @@ ** fts5yy_default[] Default action for each state. ** *********** Begin parsing tables **********************************************/ -#define fts5YY_ACTTAB_COUNT (98) +#define fts5YY_ACTTAB_COUNT (105) static const fts5YYACTIONTYPE fts5yy_action[] = { - /* 0 */ 105, 19, 90, 6, 26, 93, 92, 24, 24, 17, - /* 10 */ 90, 6, 26, 16, 92, 54, 24, 18, 90, 6, - /* 20 */ 26, 10, 92, 12, 24, 75, 86, 90, 6, 26, - /* 30 */ 13, 92, 75, 24, 20, 90, 6, 26, 101, 92, - /* 40 */ 56, 24, 27, 90, 6, 26, 100, 92, 21, 24, - /* 50 */ 23, 15, 30, 11, 1, 91, 22, 25, 9, 92, - /* 60 */ 7, 24, 3, 4, 5, 3, 4, 5, 3, 77, - /* 70 */ 4, 5, 3, 61, 23, 15, 60, 11, 80, 12, - /* 80 */ 2, 13, 68, 10, 29, 52, 55, 75, 31, 32, - /* 90 */ 8, 28, 5, 3, 51, 55, 72, 14, + /* 0 */ 81, 20, 96, 6, 28, 99, 98, 26, 26, 18, + /* 10 */ 96, 6, 28, 17, 98, 56, 26, 19, 96, 6, + /* 20 */ 28, 14, 98, 14, 26, 31, 92, 96, 6, 28, + /* 30 */ 108, 98, 25, 26, 21, 96, 6, 28, 78, 98, + /* 40 */ 58, 26, 29, 96, 6, 28, 107, 98, 22, 26, + /* 50 */ 24, 16, 12, 11, 1, 13, 13, 24, 16, 23, + /* 60 */ 11, 33, 34, 13, 97, 8, 27, 32, 98, 7, + /* 70 */ 26, 3, 4, 5, 3, 4, 5, 3, 83, 4, + /* 80 */ 5, 3, 63, 5, 3, 62, 12, 2, 86, 13, + /* 90 */ 9, 30, 10, 10, 54, 57, 75, 78, 78, 53, + /* 100 */ 57, 15, 82, 82, 71, }; static const fts5YYCODETYPE fts5yy_lookahead[] = { /* 0 */ 16, 17, 18, 19, 20, 22, 22, 24, 24, 17, /* 10 */ 18, 19, 20, 7, 22, 9, 24, 17, 18, 19, - /* 20 */ 20, 10, 22, 9, 24, 14, 17, 18, 19, 20, - /* 30 */ 9, 22, 14, 24, 17, 18, 19, 20, 26, 22, + /* 20 */ 20, 9, 22, 9, 24, 13, 17, 18, 19, 20, + /* 30 */ 26, 22, 24, 24, 17, 18, 19, 20, 15, 22, /* 40 */ 9, 24, 17, 18, 19, 20, 26, 22, 21, 24, - /* 50 */ 6, 7, 13, 9, 10, 18, 21, 20, 5, 22, - /* 60 */ 5, 24, 3, 1, 2, 3, 1, 2, 3, 0, - /* 70 */ 1, 2, 3, 11, 6, 7, 11, 9, 5, 9, - /* 80 */ 10, 9, 11, 10, 12, 8, 9, 14, 24, 25, - /* 90 */ 23, 24, 2, 3, 8, 9, 9, 9, + /* 50 */ 6, 7, 9, 9, 10, 12, 12, 6, 7, 21, + /* 60 */ 9, 24, 25, 12, 18, 5, 20, 14, 22, 5, + /* 70 */ 24, 3, 1, 2, 3, 1, 2, 3, 0, 1, + /* 80 */ 2, 3, 11, 2, 3, 11, 9, 10, 5, 12, + /* 90 */ 23, 24, 10, 10, 8, 9, 9, 15, 15, 8, + /* 100 */ 9, 9, 27, 27, 11, 27, 27, 27, 27, 27, + /* 110 */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, + /* 120 */ 27, }; -#define fts5YY_SHIFT_USE_DFLT (98) -#define fts5YY_SHIFT_COUNT (32) +#define fts5YY_SHIFT_COUNT (34) #define fts5YY_SHIFT_MIN (0) -#define fts5YY_SHIFT_MAX (90) +#define fts5YY_SHIFT_MAX (93) static const unsigned char fts5yy_shift_ofst[] = { - /* 0 */ 44, 44, 44, 44, 44, 44, 68, 70, 72, 14, - /* 10 */ 21, 73, 11, 18, 18, 31, 31, 62, 65, 69, - /* 20 */ 90, 77, 86, 6, 39, 53, 55, 59, 39, 87, - /* 30 */ 88, 39, 71, + /* 0 */ 44, 44, 44, 44, 44, 44, 51, 77, 43, 12, + /* 10 */ 14, 83, 82, 14, 23, 23, 31, 31, 71, 74, + /* 20 */ 78, 81, 86, 91, 6, 53, 53, 60, 64, 68, + /* 30 */ 53, 87, 92, 53, 93, }; -#define fts5YY_REDUCE_USE_DFLT (-18) -#define fts5YY_REDUCE_COUNT (16) +#define fts5YY_REDUCE_COUNT (17) #define fts5YY_REDUCE_MIN (-17) #define fts5YY_REDUCE_MAX (67) static const signed char fts5yy_reduce_ofst[] = { - /* 0 */ -16, -8, 0, 9, 17, 25, 37, -17, 64, -17, - /* 10 */ 67, 12, 12, 12, 20, 27, 35, + /* 0 */ -16, -8, 0, 9, 17, 25, 46, -17, -17, 37, + /* 10 */ 67, 4, 4, 8, 4, 20, 27, 38, }; static const fts5YYACTIONTYPE fts5yy_default[] = { - /* 0 */ 104, 104, 104, 104, 104, 104, 89, 104, 98, 104, - /* 10 */ 104, 103, 103, 103, 103, 104, 104, 104, 104, 104, - /* 20 */ 85, 104, 104, 104, 94, 104, 104, 84, 96, 104, - /* 30 */ 104, 97, 104, + /* 0 */ 80, 80, 80, 80, 80, 80, 95, 80, 80, 105, + /* 10 */ 80, 110, 110, 80, 110, 110, 80, 80, 80, 80, + /* 20 */ 80, 91, 80, 80, 80, 101, 100, 80, 80, 90, + /* 30 */ 103, 80, 80, 104, 80, }; /********** End of lemon-generated parsing tables *****************************/ @@ -184751,6 +200069,7 @@ int fts5yyerrcnt; /* Shifts left before out of the error */ #endif sqlite3Fts5ParserARG_SDECL /* A place to hold %extra_argument */ + sqlite3Fts5ParserCTX_SDECL /* A place to hold %extra_context */ #if fts5YYSTACKDEPTH<=0 int fts5yystksz; /* Current side of the stack */ fts5yyStackEntry *fts5yystack; /* The parser's stack */ @@ -184794,19 +200113,39 @@ } #endif /* NDEBUG */ -#ifndef NDEBUG +#if defined(fts5YYCOVERAGE) || !defined(NDEBUG) /* For tracing shifts, the names of all terminals and nonterminals ** are required. The following table supplies these names */ static const char *const fts5yyTokenName[] = { - "$", "OR", "AND", "NOT", - "TERM", "COLON", "MINUS", "LCP", - "RCP", "STRING", "LP", "RP", - "COMMA", "PLUS", "STAR", "error", - "input", "expr", "cnearset", "exprlist", - "colset", "colsetlist", "nearset", "nearphrases", - "phrase", "neardist_opt", "star_opt", + /* 0 */ "$", + /* 1 */ "OR", + /* 2 */ "AND", + /* 3 */ "NOT", + /* 4 */ "TERM", + /* 5 */ "COLON", + /* 6 */ "MINUS", + /* 7 */ "LCP", + /* 8 */ "RCP", + /* 9 */ "STRING", + /* 10 */ "LP", + /* 11 */ "RP", + /* 12 */ "CARET", + /* 13 */ "COMMA", + /* 14 */ "PLUS", + /* 15 */ "STAR", + /* 16 */ "input", + /* 17 */ "expr", + /* 18 */ "cnearset", + /* 19 */ "exprlist", + /* 20 */ "colset", + /* 21 */ "colsetlist", + /* 22 */ "nearset", + /* 23 */ "nearphrases", + /* 24 */ "phrase", + /* 25 */ "neardist_opt", + /* 26 */ "star_opt", }; -#endif /* NDEBUG */ +#endif /* defined(fts5YYCOVERAGE) || !defined(NDEBUG) */ #ifndef NDEBUG /* For tracing reduce actions, the names of all rules are required. @@ -184830,15 +200169,16 @@ /* 15 */ "cnearset ::= nearset", /* 16 */ "cnearset ::= colset COLON nearset", /* 17 */ "nearset ::= phrase", - /* 18 */ "nearset ::= STRING LP nearphrases neardist_opt RP", - /* 19 */ "nearphrases ::= phrase", - /* 20 */ "nearphrases ::= nearphrases phrase", - /* 21 */ "neardist_opt ::=", - /* 22 */ "neardist_opt ::= COMMA STRING", - /* 23 */ "phrase ::= phrase PLUS STRING star_opt", - /* 24 */ "phrase ::= STRING star_opt", - /* 25 */ "star_opt ::= STAR", - /* 26 */ "star_opt ::=", + /* 18 */ "nearset ::= CARET phrase", + /* 19 */ "nearset ::= STRING LP nearphrases neardist_opt RP", + /* 20 */ "nearphrases ::= phrase", + /* 21 */ "nearphrases ::= nearphrases phrase", + /* 22 */ "neardist_opt ::=", + /* 23 */ "neardist_opt ::= COMMA STRING", + /* 24 */ "phrase ::= phrase PLUS STRING star_opt", + /* 25 */ "phrase ::= STRING star_opt", + /* 26 */ "star_opt ::= STAR", + /* 27 */ "star_opt ::=", }; #endif /* NDEBUG */ @@ -184887,28 +200227,29 @@ /* Initialize a new parser that has already been allocated. */ -static void sqlite3Fts5ParserInit(void *fts5yypParser){ - fts5yyParser *pParser = (fts5yyParser*)fts5yypParser; +static void sqlite3Fts5ParserInit(void *fts5yypRawParser sqlite3Fts5ParserCTX_PDECL){ + fts5yyParser *fts5yypParser = (fts5yyParser*)fts5yypRawParser; + sqlite3Fts5ParserCTX_STORE #ifdef fts5YYTRACKMAXSTACKDEPTH - pParser->fts5yyhwm = 0; + fts5yypParser->fts5yyhwm = 0; #endif #if fts5YYSTACKDEPTH<=0 - pParser->fts5yytos = NULL; - pParser->fts5yystack = NULL; - pParser->fts5yystksz = 0; - if( fts5yyGrowStack(pParser) ){ - pParser->fts5yystack = &pParser->fts5yystk0; - pParser->fts5yystksz = 1; + fts5yypParser->fts5yytos = NULL; + fts5yypParser->fts5yystack = NULL; + fts5yypParser->fts5yystksz = 0; + if( fts5yyGrowStack(fts5yypParser) ){ + fts5yypParser->fts5yystack = &fts5yypParser->fts5yystk0; + fts5yypParser->fts5yystksz = 1; } #endif #ifndef fts5YYNOERRORRECOVERY - pParser->fts5yyerrcnt = -1; + fts5yypParser->fts5yyerrcnt = -1; #endif - pParser->fts5yytos = pParser->fts5yystack; - pParser->fts5yystack[0].stateno = 0; - pParser->fts5yystack[0].major = 0; + fts5yypParser->fts5yytos = fts5yypParser->fts5yystack; + fts5yypParser->fts5yystack[0].stateno = 0; + fts5yypParser->fts5yystack[0].major = 0; #if fts5YYSTACKDEPTH>0 - pParser->fts5yystackEnd = &pParser->fts5yystack[fts5YYSTACKDEPTH-1]; + fts5yypParser->fts5yystackEnd = &fts5yypParser->fts5yystack[fts5YYSTACKDEPTH-1]; #endif } @@ -184925,11 +200266,14 @@ ** A pointer to a parser. This pointer is used in subsequent calls ** to sqlite3Fts5Parser and sqlite3Fts5ParserFree. */ -static void *sqlite3Fts5ParserAlloc(void *(*mallocProc)(fts5YYMALLOCARGTYPE)){ - fts5yyParser *pParser; - pParser = (fts5yyParser*)(*mallocProc)( (fts5YYMALLOCARGTYPE)sizeof(fts5yyParser) ); - if( pParser ) sqlite3Fts5ParserInit(pParser); - return pParser; +static void *sqlite3Fts5ParserAlloc(void *(*mallocProc)(fts5YYMALLOCARGTYPE) sqlite3Fts5ParserCTX_PDECL){ + fts5yyParser *fts5yypParser; + fts5yypParser = (fts5yyParser*)(*mallocProc)( (fts5YYMALLOCARGTYPE)sizeof(fts5yyParser) ); + if( fts5yypParser ){ + sqlite3Fts5ParserCTX_STORE + sqlite3Fts5ParserInit(fts5yypParser sqlite3Fts5ParserCTX_PARAM); + } + return (void*)fts5yypParser; } #endif /* sqlite3Fts5Parser_ENGINEALWAYSONSTACK */ @@ -184946,7 +200290,8 @@ fts5YYCODETYPE fts5yymajor, /* Type code for object to destroy */ fts5YYMINORTYPE *fts5yypminor /* The object to be destroyed */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH switch( fts5yymajor ){ /* Here is inserted the actions which take place when a ** terminal or non-terminal is destroyed. This can happen @@ -185056,24 +200401,66 @@ } #endif +/* This array of booleans keeps track of the parser statement +** coverage. The element fts5yycoverage[X][Y] is set when the parser +** is in state X and has a lookahead token Y. In a well-tested +** systems, every element of this matrix should end up being set. +*/ +#if defined(fts5YYCOVERAGE) +static unsigned char fts5yycoverage[fts5YYNSTATE][fts5YYNFTS5TOKEN]; +#endif + /* +** Write into out a description of every state/lookahead combination that +** +** (1) has not been used by the parser, and +** (2) is not a syntax error. +** +** Return the number of missed state/lookahead combinations. +*/ +#if defined(fts5YYCOVERAGE) +static int sqlite3Fts5ParserCoverage(FILE *out){ + int stateno, iLookAhead, i; + int nMissed = 0; + for(stateno=0; statenofts5yytos->stateno; - - if( stateno>=fts5YY_MIN_REDUCE ) return stateno; + + if( stateno>fts5YY_MAX_SHIFT ) return stateno; assert( stateno <= fts5YY_SHIFT_COUNT ); +#if defined(fts5YYCOVERAGE) + fts5yycoverage[stateno][iLookAhead] = 1; +#endif do{ i = fts5yy_shift_ofst[stateno]; + assert( i>=0 ); + /* assert( i+fts5YYNFTS5TOKEN<=(int)fts5YY_NLOOKAHEAD ); */ assert( iLookAhead!=fts5YYNOCODE ); + assert( iLookAhead < fts5YYNFTS5TOKEN ); i += iLookAhead; - if( i<0 || i>=fts5YY_ACTTAB_COUNT || fts5yy_lookahead[i]!=iLookAhead ){ + if( i>=fts5YY_NLOOKAHEAD || fts5yy_lookahead[i]!=iLookAhead ){ #ifdef fts5YYFALLBACK fts5YYCODETYPE iFallback; /* Fallback token */ if( iLookAhead=fts5YY_ACTTAB_COUNT j0 ){ #ifndef NDEBUG @@ -185123,8 +200511,8 @@ ** Find the appropriate action for a parser given the non-terminal ** look-ahead token iLookAhead. */ -static int fts5yy_find_reduce_action( - int stateno, /* Current state number */ +static fts5YYACTIONTYPE fts5yy_find_reduce_action( + fts5YYACTIONTYPE stateno, /* Current state number */ fts5YYCODETYPE iLookAhead /* The look-ahead token */ ){ int i; @@ -185136,7 +200524,6 @@ assert( stateno<=fts5YY_REDUCE_COUNT ); #endif i = fts5yy_reduce_ofst[stateno]; - assert( i!=fts5YY_REDUCE_USE_DFLT ); assert( iLookAhead!=fts5YYNOCODE ); i += iLookAhead; #ifdef fts5YYERRORSYMBOL @@ -185154,7 +200541,8 @@ ** The following routine is called if the stack overflows. */ static void fts5yyStackOverflow(fts5yyParser *fts5yypParser){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #ifndef NDEBUG if( fts5yyTraceFILE ){ fprintf(fts5yyTraceFILE,"%sStack Overflow!\n",fts5yyTracePrompt); @@ -185167,7 +200555,8 @@ sqlite3Fts5ParseError(pParse, "fts5: parser stack overflow"); /******** End %stack_overflow code ********************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument var */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument var */ + sqlite3Fts5ParserCTX_STORE } /* @@ -185174,20 +200563,21 @@ ** Print tracing information for a SHIFT action */ #ifndef NDEBUG -static void fts5yyTraceShift(fts5yyParser *fts5yypParser, int fts5yyNewState){ +static void fts5yyTraceShift(fts5yyParser *fts5yypParser, int fts5yyNewState, const char *zTag){ if( fts5yyTraceFILE ){ if( fts5yyNewStatefts5yytos->major], + fprintf(fts5yyTraceFILE,"%s%s '%s', go to state %d\n", + fts5yyTracePrompt, zTag, fts5yyTokenName[fts5yypParser->fts5yytos->major], fts5yyNewState); }else{ - fprintf(fts5yyTraceFILE,"%sShift '%s'\n", - fts5yyTracePrompt,fts5yyTokenName[fts5yypParser->fts5yytos->major]); + fprintf(fts5yyTraceFILE,"%s%s '%s', pending reduce %d\n", + fts5yyTracePrompt, zTag, fts5yyTokenName[fts5yypParser->fts5yytos->major], + fts5yyNewState - fts5YY_MIN_REDUCE); } } } #else -# define fts5yyTraceShift(X,Y) +# define fts5yyTraceShift(X,Y,Z) #endif /* @@ -185195,8 +200585,8 @@ */ static void fts5yy_shift( fts5yyParser *fts5yypParser, /* The parser to be shifted */ - int fts5yyNewState, /* The new state to shift in */ - int fts5yyMajor, /* The major token to shift in */ + fts5YYACTIONTYPE fts5yyNewState, /* The new state to shift in */ + fts5YYCODETYPE fts5yyMajor, /* The major token to shift in */ sqlite3Fts5ParserFTS5TOKENTYPE fts5yyMinor /* The minor token to shift in */ ){ fts5yyStackEntry *fts5yytos; @@ -185226,10 +200616,10 @@ fts5yyNewState += fts5YY_MIN_REDUCE - fts5YY_MIN_SHIFTREDUCE; } fts5yytos = fts5yypParser->fts5yytos; - fts5yytos->stateno = (fts5YYACTIONTYPE)fts5yyNewState; - fts5yytos->major = (fts5YYCODETYPE)fts5yyMajor; + fts5yytos->stateno = fts5yyNewState; + fts5yytos->major = fts5yyMajor; fts5yytos->minor.fts5yy0 = fts5yyMinor; - fts5yyTraceShift(fts5yypParser, fts5yyNewState); + fts5yyTraceShift(fts5yypParser, fts5yyNewState, "Shift"); } /* The following table contains information about every rule that @@ -185239,33 +200629,34 @@ fts5YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ signed char nrhs; /* Negative of the number of RHS symbols in the rule */ } fts5yyRuleInfo[] = { - { 16, -1 }, - { 20, -4 }, - { 20, -3 }, - { 20, -1 }, - { 20, -2 }, - { 21, -2 }, - { 21, -1 }, - { 17, -3 }, - { 17, -3 }, - { 17, -3 }, - { 17, -5 }, - { 17, -3 }, - { 17, -1 }, - { 19, -1 }, - { 19, -2 }, - { 18, -1 }, - { 18, -3 }, - { 22, -1 }, - { 22, -5 }, - { 23, -1 }, - { 23, -2 }, - { 25, 0 }, - { 25, -2 }, - { 24, -4 }, - { 24, -2 }, - { 26, -1 }, - { 26, 0 }, + { 16, -1 }, /* (0) input ::= expr */ + { 20, -4 }, /* (1) colset ::= MINUS LCP colsetlist RCP */ + { 20, -3 }, /* (2) colset ::= LCP colsetlist RCP */ + { 20, -1 }, /* (3) colset ::= STRING */ + { 20, -2 }, /* (4) colset ::= MINUS STRING */ + { 21, -2 }, /* (5) colsetlist ::= colsetlist STRING */ + { 21, -1 }, /* (6) colsetlist ::= STRING */ + { 17, -3 }, /* (7) expr ::= expr AND expr */ + { 17, -3 }, /* (8) expr ::= expr OR expr */ + { 17, -3 }, /* (9) expr ::= expr NOT expr */ + { 17, -5 }, /* (10) expr ::= colset COLON LP expr RP */ + { 17, -3 }, /* (11) expr ::= LP expr RP */ + { 17, -1 }, /* (12) expr ::= exprlist */ + { 19, -1 }, /* (13) exprlist ::= cnearset */ + { 19, -2 }, /* (14) exprlist ::= exprlist cnearset */ + { 18, -1 }, /* (15) cnearset ::= nearset */ + { 18, -3 }, /* (16) cnearset ::= colset COLON nearset */ + { 22, -1 }, /* (17) nearset ::= phrase */ + { 22, -2 }, /* (18) nearset ::= CARET phrase */ + { 22, -5 }, /* (19) nearset ::= STRING LP nearphrases neardist_opt RP */ + { 23, -1 }, /* (20) nearphrases ::= phrase */ + { 23, -2 }, /* (21) nearphrases ::= nearphrases phrase */ + { 25, 0 }, /* (22) neardist_opt ::= */ + { 25, -2 }, /* (23) neardist_opt ::= COMMA STRING */ + { 24, -4 }, /* (24) phrase ::= phrase PLUS STRING star_opt */ + { 24, -2 }, /* (25) phrase ::= STRING star_opt */ + { 26, -1 }, /* (26) star_opt ::= STAR */ + { 26, 0 }, /* (27) star_opt ::= */ }; static void fts5yy_accept(fts5yyParser*); /* Forward Declaration */ @@ -185273,22 +200664,39 @@ /* ** Perform a reduce action and the shift that must immediately ** follow the reduce. +** +** The fts5yyLookahead and fts5yyLookaheadToken parameters provide reduce actions +** access to the lookahead token (if any). The fts5yyLookahead will be fts5YYNOCODE +** if the lookahead token has already been consumed. As this procedure is +** only called from one place, optimizing compilers will in-line it, which +** means that the extra parameters have no performance impact. */ -static void fts5yy_reduce( +static fts5YYACTIONTYPE fts5yy_reduce( fts5yyParser *fts5yypParser, /* The parser */ - unsigned int fts5yyruleno /* Number of the rule by which to reduce */ + unsigned int fts5yyruleno, /* Number of the rule by which to reduce */ + int fts5yyLookahead, /* Lookahead token, or fts5YYNOCODE if none */ + sqlite3Fts5ParserFTS5TOKENTYPE fts5yyLookaheadToken /* Value of the lookahead token */ + sqlite3Fts5ParserCTX_PDECL /* %extra_context */ ){ int fts5yygoto; /* The next state */ - int fts5yyact; /* The next action */ + fts5YYACTIONTYPE fts5yyact; /* The next action */ fts5yyStackEntry *fts5yymsp; /* The top of the parser's stack */ int fts5yysize; /* Amount to pop the stack */ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + (void)fts5yyLookahead; + (void)fts5yyLookaheadToken; fts5yymsp = fts5yypParser->fts5yytos; #ifndef NDEBUG if( fts5yyTraceFILE && fts5yyruleno<(int)(sizeof(fts5yyRuleName)/sizeof(fts5yyRuleName[0])) ){ fts5yysize = fts5yyRuleInfo[fts5yyruleno].nrhs; - fprintf(fts5yyTraceFILE, "%sReduce [%s], go to state %d.\n", fts5yyTracePrompt, - fts5yyRuleName[fts5yyruleno], fts5yymsp[fts5yysize].stateno); + if( fts5yysize ){ + fprintf(fts5yyTraceFILE, "%sReduce %d [%s], go to state %d.\n", + fts5yyTracePrompt, + fts5yyruleno, fts5yyRuleName[fts5yyruleno], fts5yymsp[fts5yysize].stateno); + }else{ + fprintf(fts5yyTraceFILE, "%sReduce %d [%s].\n", + fts5yyTracePrompt, fts5yyruleno, fts5yyRuleName[fts5yyruleno]); + } } #endif /* NDEBUG */ @@ -185305,13 +200713,19 @@ #if fts5YYSTACKDEPTH>0 if( fts5yypParser->fts5yytos>=fts5yypParser->fts5yystackEnd ){ fts5yyStackOverflow(fts5yypParser); - return; + /* The call to fts5yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } #else if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5yypParser->fts5yystksz-1] ){ if( fts5yyGrowStack(fts5yypParser) ){ fts5yyStackOverflow(fts5yypParser); - return; + /* The call to fts5yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } fts5yymsp = fts5yypParser->fts5yytos; } @@ -185419,7 +200833,13 @@ { fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); } fts5yymsp[0].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 18: /* nearset ::= STRING LP nearphrases neardist_opt RP */ + case 18: /* nearset ::= CARET phrase */ +{ + sqlite3Fts5ParseSetCaret(fts5yymsp[0].minor.fts5yy53); + fts5yymsp[-1].minor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); +} + break; + case 19: /* nearset ::= STRING LP nearphrases neardist_opt RP */ { sqlite3Fts5ParseNear(pParse, &fts5yymsp[-4].minor.fts5yy0); sqlite3Fts5ParseSetDistance(pParse, fts5yymsp[-2].minor.fts5yy46, &fts5yymsp[-1].minor.fts5yy0); @@ -185427,40 +200847,40 @@ } fts5yymsp[-4].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 19: /* nearphrases ::= phrase */ + case 20: /* nearphrases ::= phrase */ { fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); } fts5yymsp[0].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 20: /* nearphrases ::= nearphrases phrase */ + case 21: /* nearphrases ::= nearphrases phrase */ { fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, fts5yymsp[-1].minor.fts5yy46, fts5yymsp[0].minor.fts5yy53); } fts5yymsp[-1].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 21: /* neardist_opt ::= */ + case 22: /* neardist_opt ::= */ { fts5yymsp[1].minor.fts5yy0.p = 0; fts5yymsp[1].minor.fts5yy0.n = 0; } break; - case 22: /* neardist_opt ::= COMMA STRING */ + case 23: /* neardist_opt ::= COMMA STRING */ { fts5yymsp[-1].minor.fts5yy0 = fts5yymsp[0].minor.fts5yy0; } break; - case 23: /* phrase ::= phrase PLUS STRING star_opt */ + case 24: /* phrase ::= phrase PLUS STRING star_opt */ { fts5yylhsminor.fts5yy53 = sqlite3Fts5ParseTerm(pParse, fts5yymsp[-3].minor.fts5yy53, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4); } fts5yymsp[-3].minor.fts5yy53 = fts5yylhsminor.fts5yy53; break; - case 24: /* phrase ::= STRING star_opt */ + case 25: /* phrase ::= STRING star_opt */ { fts5yylhsminor.fts5yy53 = sqlite3Fts5ParseTerm(pParse, 0, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4); } fts5yymsp[-1].minor.fts5yy53 = fts5yylhsminor.fts5yy53; break; - case 25: /* star_opt ::= STAR */ + case 26: /* star_opt ::= STAR */ { fts5yymsp[0].minor.fts5yy4 = 1; } break; - case 26: /* star_opt ::= */ + case 27: /* star_opt ::= */ { fts5yymsp[1].minor.fts5yy4 = 0; } break; default: @@ -185479,16 +200899,12 @@ /* It is not possible for a REDUCE to be followed by an error */ assert( fts5yyact!=fts5YY_ERROR_ACTION ); - if( fts5yyact==fts5YY_ACCEPT_ACTION ){ - fts5yypParser->fts5yytos += fts5yysize; - fts5yy_accept(fts5yypParser); - }else{ - fts5yymsp += fts5yysize+1; - fts5yypParser->fts5yytos = fts5yymsp; - fts5yymsp->stateno = (fts5YYACTIONTYPE)fts5yyact; - fts5yymsp->major = (fts5YYCODETYPE)fts5yygoto; - fts5yyTraceShift(fts5yypParser, fts5yyact); - } + fts5yymsp += fts5yysize+1; + fts5yypParser->fts5yytos = fts5yymsp; + fts5yymsp->stateno = (fts5YYACTIONTYPE)fts5yyact; + fts5yymsp->major = (fts5YYCODETYPE)fts5yygoto; + fts5yyTraceShift(fts5yypParser, fts5yyact, "... then shift"); + return fts5yyact; } /* @@ -185498,7 +200914,8 @@ static void fts5yy_parse_failed( fts5yyParser *fts5yypParser /* The parser */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #ifndef NDEBUG if( fts5yyTraceFILE ){ fprintf(fts5yyTraceFILE,"%sFail!\n",fts5yyTracePrompt); @@ -185509,7 +200926,8 @@ ** parser fails */ /************ Begin %parse_failure code ***************************************/ /************ End %parse_failure code *****************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserCTX_STORE } #endif /* fts5YYNOERRORRECOVERY */ @@ -185521,7 +200939,8 @@ int fts5yymajor, /* The major type of the error token */ sqlite3Fts5ParserFTS5TOKENTYPE fts5yyminor /* The minor type of the error token */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #define FTS5TOKEN fts5yyminor /************ Begin %syntax_error code ****************************************/ @@ -185530,7 +200949,8 @@ pParse, "fts5: syntax error near \"%.*s\"",FTS5TOKEN.n,FTS5TOKEN.p ); /************ End %syntax_error code ******************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserCTX_STORE } /* @@ -185539,7 +200959,8 @@ static void fts5yy_accept( fts5yyParser *fts5yypParser /* The parser */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #ifndef NDEBUG if( fts5yyTraceFILE ){ fprintf(fts5yyTraceFILE,"%sAccept!\n",fts5yyTracePrompt); @@ -185553,7 +200974,8 @@ ** parser accepts */ /*********** Begin %parse_accept code *****************************************/ /*********** End %parse_accept code *******************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserCTX_STORE } /* The main parser program. @@ -185582,7 +201004,7 @@ sqlite3Fts5ParserARG_PDECL /* Optional %extra_argument parameter */ ){ fts5YYMINORTYPE fts5yyminorunion; - unsigned int fts5yyact; /* The parser action. */ + fts5YYACTIONTYPE fts5yyact; /* The parser action. */ #if !defined(fts5YYERRORSYMBOL) && !defined(fts5YYNOERRORRECOVERY) int fts5yyendofinput; /* True if we are at the end of input */ #endif @@ -185589,31 +201011,44 @@ #ifdef fts5YYERRORSYMBOL int fts5yyerrorhit = 0; /* True if fts5yymajor has invoked an error */ #endif - fts5yyParser *fts5yypParser; /* The parser */ + fts5yyParser *fts5yypParser = (fts5yyParser*)fts5yyp; /* The parser */ + sqlite3Fts5ParserCTX_FETCH + sqlite3Fts5ParserARG_STORE - fts5yypParser = (fts5yyParser*)fts5yyp; assert( fts5yypParser->fts5yytos!=0 ); #if !defined(fts5YYERRORSYMBOL) && !defined(fts5YYNOERRORRECOVERY) fts5yyendofinput = (fts5yymajor==0); #endif - sqlite3Fts5ParserARG_STORE; + fts5yyact = fts5yypParser->fts5yytos->stateno; #ifndef NDEBUG if( fts5yyTraceFILE ){ - fprintf(fts5yyTraceFILE,"%sInput '%s'\n",fts5yyTracePrompt,fts5yyTokenName[fts5yymajor]); + if( fts5yyact < fts5YY_MIN_REDUCE ){ + fprintf(fts5yyTraceFILE,"%sInput '%s' in state %d\n", + fts5yyTracePrompt,fts5yyTokenName[fts5yymajor],fts5yyact); + }else{ + fprintf(fts5yyTraceFILE,"%sInput '%s' with pending reduce %d\n", + fts5yyTracePrompt,fts5yyTokenName[fts5yymajor],fts5yyact-fts5YY_MIN_REDUCE); + } } #endif do{ - fts5yyact = fts5yy_find_shift_action(fts5yypParser,(fts5YYCODETYPE)fts5yymajor); - if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){ - fts5yy_shift(fts5yypParser,fts5yyact,fts5yymajor,fts5yyminor); + assert( fts5yyact==fts5yypParser->fts5yytos->stateno ); + fts5yyact = fts5yy_find_shift_action((fts5YYCODETYPE)fts5yymajor,fts5yyact); + if( fts5yyact >= fts5YY_MIN_REDUCE ){ + fts5yyact = fts5yy_reduce(fts5yypParser,fts5yyact-fts5YY_MIN_REDUCE,fts5yymajor, + fts5yyminor sqlite3Fts5ParserCTX_PARAM); + }else if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){ + fts5yy_shift(fts5yypParser,fts5yyact,(fts5YYCODETYPE)fts5yymajor,fts5yyminor); #ifndef fts5YYNOERRORRECOVERY fts5yypParser->fts5yyerrcnt--; #endif - fts5yymajor = fts5YYNOCODE; - }else if( fts5yyact <= fts5YY_MAX_REDUCE ){ - fts5yy_reduce(fts5yypParser,fts5yyact-fts5YY_MIN_REDUCE); + break; + }else if( fts5yyact==fts5YY_ACCEPT_ACTION ){ + fts5yypParser->fts5yytos--; + fts5yy_accept(fts5yypParser); + return; }else{ assert( fts5yyact == fts5YY_ERROR_ACTION ); fts5yyminorunion.fts5yy0 = fts5yyminor; @@ -185660,10 +201095,9 @@ fts5yymajor = fts5YYNOCODE; }else{ while( fts5yypParser->fts5yytos >= fts5yypParser->fts5yystack - && fts5yymx != fts5YYERRORSYMBOL && (fts5yyact = fts5yy_find_reduce_action( fts5yypParser->fts5yytos->stateno, - fts5YYERRORSYMBOL)) >= fts5YY_MIN_REDUCE + fts5YYERRORSYMBOL)) > fts5YY_MAX_SHIFTREDUCE ){ fts5yy_pop_parser_stack(fts5yypParser); } @@ -185680,6 +201114,8 @@ } fts5yypParser->fts5yyerrcnt = 3; fts5yyerrorhit = 1; + if( fts5yymajor==fts5YYNOCODE ) break; + fts5yyact = fts5yypParser->fts5yytos->stateno; #elif defined(fts5YYNOERRORRECOVERY) /* If the fts5YYNOERRORRECOVERY macro is defined, then do not attempt to ** do any kind of error recovery. Instead, simply invoke the syntax @@ -185690,8 +201126,7 @@ */ fts5yy_syntax_error(fts5yypParser,fts5yymajor, fts5yyminor); fts5yy_destructor(fts5yypParser,(fts5YYCODETYPE)fts5yymajor,&fts5yyminorunion); - fts5yymajor = fts5YYNOCODE; - + break; #else /* fts5YYERRORSYMBOL is not defined */ /* This is what we do if the grammar does not define ERROR: ** @@ -185713,10 +201148,10 @@ fts5yypParser->fts5yyerrcnt = -1; #endif } - fts5yymajor = fts5YYNOCODE; + break; #endif } - }while( fts5yymajor!=fts5YYNOCODE && fts5yypParser->fts5yytos>fts5yypParser->fts5yystack ); + }while( fts5yypParser->fts5yytos>fts5yypParser->fts5yystack ); #ifndef NDEBUG if( fts5yyTraceFILE ){ fts5yyStackEntry *i; @@ -185733,6 +201168,21 @@ } /* +** Return the fallback token corresponding to canonical token iToken, or +** 0 if iToken has no fallback. +*/ +static int sqlite3Fts5ParserFallback(int iToken){ +#ifdef fts5YYFALLBACK + if( iToken<(int)(sizeof(fts5yyFallback)/sizeof(fts5yyFallback[0])) ){ + return fts5yyFallback[iToken]; + } +#else + (void)iToken; +#endif + return 0; +} + +/* ** 2014 May 31 ** ** The author disclaims copyright to this source code. In place of @@ -186093,6 +201543,16 @@ } /* +** Return the value in pVal interpreted as utf-8 text. Except, if pVal +** contains a NULL value, return a pointer to a static string zero +** bytes in length instead of a NULL pointer. +*/ +static const char *fts5ValueToText(sqlite3_value *pVal){ + const char *zRet = (const char*)sqlite3_value_text(pVal); + return zRet ? zRet : ""; +} + +/* ** Implementation of snippet() function. */ static void fts5SnippetFunction( @@ -186127,9 +201587,9 @@ nCol = pApi->xColumnCount(pFts); memset(&ctx, 0, sizeof(HighlightContext)); iCol = sqlite3_value_int(apVal[0]); - ctx.zOpen = (const char*)sqlite3_value_text(apVal[1]); - ctx.zClose = (const char*)sqlite3_value_text(apVal[2]); - zEllips = (const char*)sqlite3_value_text(apVal[3]); + ctx.zOpen = fts5ValueToText(apVal[1]); + ctx.zClose = fts5ValueToText(apVal[2]); + zEllips = fts5ValueToText(apVal[3]); nToken = sqlite3_value_int(apVal[4]); iBestCol = (iCol>=0 ? iCol : 0); @@ -187832,6 +203292,7 @@ /* #include */ static void sqlite3Fts5ParserTrace(FILE*, char*); #endif +static int sqlite3Fts5ParserFallback(int); struct Fts5Expr { @@ -187883,7 +203344,8 @@ ** or term prefix. */ struct Fts5ExprTerm { - int bPrefix; /* True for a prefix term */ + u8 bPrefix; /* True for a prefix term */ + u8 bFirst; /* True if token must be first in column */ char *zTerm; /* nul-terminated term */ Fts5IndexIter *pIter; /* Iterator for this term */ Fts5ExprTerm *pSynonym; /* Pointer to first in list of synonyms */ @@ -187964,6 +203426,7 @@ case '+': tok = FTS5_PLUS; break; case '*': tok = FTS5_STAR; break; case '-': tok = FTS5_MINUS; break; + case '^': tok = FTS5_CARET; break; case '\0': tok = FTS5_EOF; break; case '"': { @@ -188223,6 +203686,7 @@ Fts5PoslistReader *aIter = aStatic; int i; int rc = SQLITE_OK; + int bFirst = pPhrase->aTerm[0].bFirst; fts5BufferZero(&pPhrase->poslist); @@ -188277,8 +203741,10 @@ }while( bMatch==0 ); /* Append position iPos to the output */ - rc = sqlite3Fts5PoslistWriterAppend(&pPhrase->poslist, &writer, iPos); - if( rc!=SQLITE_OK ) goto ismatch_out; + if( bFirst==0 || FTS5_POS2OFFSET(iPos)==0 ){ + rc = sqlite3Fts5PoslistWriterAppend(&pPhrase->poslist, &writer, iPos); + if( rc!=SQLITE_OK ) goto ismatch_out; + } for(i=0; inTerm; i++){ if( sqlite3Fts5PoslistReaderNext(&aIter[i]) ) goto ismatch_out; @@ -188532,7 +203998,9 @@ ** phrase is not a match, break out of the loop early. */ for(i=0; rc==SQLITE_OK && inPhrase; i++){ Fts5ExprPhrase *pPhrase = pNear->apPhrase[i]; - if( pPhrase->nTerm>1 || pPhrase->aTerm[0].pSynonym || pNear->pColset ){ + if( pPhrase->nTerm>1 || pPhrase->aTerm[0].pSynonym + || pNear->pColset || pPhrase->aTerm[0].bFirst + ){ int bMatch = 0; rc = fts5ExprPhraseIsMatch(pNode, pPhrase, &bMatch); if( bMatch==0 ) break; @@ -188713,6 +204181,7 @@ assert( pNear->nPhrase>1 || pNear->apPhrase[0]->nTerm>1 || pNear->apPhrase[0]->aTerm[0].pSynonym + || pNear->apPhrase[0]->aTerm[0].bFirst ); /* Initialize iLast, the "lastest" rowid any iterator points to. If the @@ -189238,6 +204707,16 @@ } /* +** Set the "bFirst" flag on the first token of the phrase passed as the +** only argument. +*/ +static void sqlite3Fts5ParseSetCaret(Fts5ExprPhrase *pPhrase){ + if( pPhrase && pPhrase->nTerm ){ + pPhrase->aTerm[0].bFirst = 1; + } +} + +/* ** If argument pNear is NULL, then a new Fts5ExprNearset object is allocated ** and populated with pPhrase. Or, if pNear is not NULL, phrase pPhrase is ** appended to it and the results returned. @@ -189454,7 +204933,7 @@ ** no token characters at all. (e.g ... MATCH '""'). */ sCtx.pPhrase = sqlite3Fts5MallocZero(&pParse->rc, sizeof(Fts5ExprPhrase)); }else if( sCtx.pPhrase->nTerm ){ - sCtx.pPhrase->aTerm[sCtx.pPhrase->nTerm-1].bPrefix = bPrefix; + sCtx.pPhrase->aTerm[sCtx.pPhrase->nTerm-1].bPrefix = (u8)bPrefix; } pParse->apPhrase[pParse->nPhrase-1] = sCtx.pPhrase; } @@ -189515,6 +204994,7 @@ } if( rc==SQLITE_OK ){ sCtx.pPhrase->aTerm[i].bPrefix = pOrig->aTerm[i].bPrefix; + sCtx.pPhrase->aTerm[i].bFirst = pOrig->aTerm[i].bFirst; } } }else{ @@ -189533,7 +205013,10 @@ pNew->pRoot->pNear->nPhrase = 1; sCtx.pPhrase->pNode = pNew->pRoot; - if( pOrig->nTerm==1 && pOrig->aTerm[0].pSynonym==0 ){ + if( pOrig->nTerm==1 + && pOrig->aTerm[0].pSynonym==0 + && pOrig->aTerm[0].bFirst==0 + ){ pNew->pRoot->eType = FTS5_TERM; pNew->pRoot->xNext = fts5ExprNodeNext_TERM; }else{ @@ -189807,6 +205290,7 @@ Fts5ExprNearset *pNear = pNode->pNear; if( pNear->nPhrase==1 && pNear->apPhrase[0]->nTerm==1 && pNear->apPhrase[0]->aTerm[0].pSynonym==0 + && pNear->apPhrase[0]->aTerm[0].bFirst==0 ){ pNode->eType = FTS5_TERM; pNode->xNext = fts5ExprNodeNext_TERM; @@ -189893,20 +205377,23 @@ } } - if( pParse->pConfig->eDetail!=FTS5_DETAIL_FULL - && (pNear->nPhrase!=1 || pNear->apPhrase[0]->nTerm>1) - ){ - assert( pParse->rc==SQLITE_OK ); - pParse->rc = SQLITE_ERROR; - assert( pParse->zErr==0 ); - pParse->zErr = sqlite3_mprintf( - "fts5: %s queries are not supported (detail!=full)", - pNear->nPhrase==1 ? "phrase": "NEAR" - ); - sqlite3_free(pRet); - pRet = 0; + if( pParse->pConfig->eDetail!=FTS5_DETAIL_FULL ){ + Fts5ExprPhrase *pPhrase = pNear->apPhrase[0]; + if( pNear->nPhrase!=1 + || pPhrase->nTerm>1 + || (pPhrase->nTerm>0 && pPhrase->aTerm[0].bFirst) + ){ + assert( pParse->rc==SQLITE_OK ); + pParse->rc = SQLITE_ERROR; + assert( pParse->zErr==0 ); + pParse->zErr = sqlite3_mprintf( + "fts5: %s queries are not supported (detail!=full)", + pNear->nPhrase==1 ? "phrase": "NEAR" + ); + sqlite3_free(pRet); + pRet = 0; + } } - }else{ fts5ExprAddChildren(pRet, pLeft); fts5ExprAddChildren(pRet, pRight); @@ -190310,6 +205797,7 @@ sqlite3_value **apVal /* Function arguments */ ){ int iCode; + u8 aArr[32]; if( nArg!=1 ){ sqlite3_result_error(pCtx, "wrong number of arguments to function fts5_isalnum", -1 @@ -190316,8 +205804,12 @@ ); return; } + memset(aArr, 0, sizeof(aArr)); + sqlite3Fts5UnicodeCatParse("L*", aArr); + sqlite3Fts5UnicodeCatParse("N*", aArr); + sqlite3Fts5UnicodeCatParse("Co", aArr); iCode = sqlite3_value_int(apVal[0]); - sqlite3_result_int(pCtx, sqlite3Fts5UnicodeIsalnum(iCode)); + sqlite3_result_int(pCtx, aArr[sqlite3Fts5UnicodeCategory(iCode)]); } static void fts5ExprFold( @@ -190361,10 +205853,12 @@ rc = sqlite3_create_function(db, p->z, -1, SQLITE_UTF8, pCtx, p->x, 0, 0); } - /* Avoid a warning indicating that sqlite3Fts5ParserTrace() is unused */ + /* Avoid warnings indicating that sqlite3Fts5ParserTrace() and + ** sqlite3Fts5ParserFallback() are unused */ #ifndef NDEBUG (void)sqlite3Fts5ParserTrace; #endif + (void)sqlite3Fts5ParserFallback; return rc; } @@ -191909,6 +207403,7 @@ sqlite3_bind_blob(p->pWriter, 2, pData, nData, SQLITE_STATIC); sqlite3_step(p->pWriter); p->rc = sqlite3_reset(p->pWriter); + sqlite3_bind_null(p->pWriter, 2); } /* @@ -193537,6 +209032,7 @@ bDlidx = (val & 0x0001); } p->rc = sqlite3_reset(pIdxSelect); + sqlite3_bind_null(pIdxSelect, 2); if( iPgpgnoFirst ){ iPg = pSeg->pgnoFirst; @@ -194749,6 +210245,7 @@ sqlite3_bind_blob(pIdxSelect, 2, aBlob, 2, SQLITE_STATIC); assert( sqlite3_step(pIdxSelect)!=SQLITE_ROW ); p->rc = sqlite3_reset(pIdxSelect); + sqlite3_bind_null(pIdxSelect, 2); } } #endif @@ -194875,6 +210372,7 @@ sqlite3_bind_int64(p->pIdxWriter, 3, bFlag + ((i64)pWriter->iBtPage<<1)); sqlite3_step(p->pIdxWriter); p->rc = sqlite3_reset(p->pIdxWriter); + sqlite3_bind_null(p->pIdxWriter, 2); } pWriter->iBtPage = 0; } @@ -196060,7 +211558,13 @@ Fts5Buffer out = {0, 0, 0}; Fts5Buffer tmp = {0, 0, 0}; - if( sqlite3Fts5BufferSize(&p->rc, &out, p1->n + p2->n) ) return; + /* The maximum size of the output is equal to the sum of the two + ** input sizes + 1 varint (9 bytes). The extra varint is because if the + ** first rowid in one input is a large negative number, and the first in + ** the other a non-negative number, the delta for the non-negative + ** number will be larger on disk than the literal integer value + ** was. */ + if( sqlite3Fts5BufferSize(&p->rc, &out, p1->n + p2->n + 9) ) return; fts5DoclistIterInit(p1, &i1); fts5DoclistIterInit(p2, &i2); @@ -196154,6 +211658,7 @@ fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid); fts5BufferSafeAppendBlob(&out, i2.aPoslist, i2.aEof - i2.aPoslist); } + assert( out.n<=(p1->n+p2->n+9) ); fts5BufferSet(&p->rc, p1, out.n, out.p); fts5BufferFree(&tmp); @@ -196401,7 +211906,10 @@ for(i=0; i=nByte ) return 0; /* Input contains fewer than nChar chars */ if( (unsigned char)p[n++]>=0xc0 ){ - while( (p[n] & 0xc0)==0x80 ) n++; + while( (p[n] & 0xc0)==0x80 ){ + n++; + if( n>=nByte ) break; + } } } return n; @@ -196539,7 +212047,7 @@ fts5CloseReader(p); } - *ppIter = &pRet->base; + *ppIter = (Fts5IndexIter*)pRet; sqlite3Fts5BufferFree(&buf); } return fts5IndexReturn(p); @@ -197926,7 +213434,7 @@ case FTS5_SAVEPOINT: assert( p->ts.eState==1 ); assert( iSavepoint>=0 ); - assert( iSavepoint>p->ts.iSavepoint ); + assert( iSavepoint>=p->ts.iSavepoint ); p->ts.iSavepoint = iSavepoint; break; @@ -198181,6 +213689,12 @@ aColMap[1] = nCol; aColMap[2] = nCol+1; + assert( SQLITE_INDEX_CONSTRAINT_EQnConstraint; i++){ struct sqlite3_index_constraint *p = &pInfo->aConstraint[i]; @@ -198199,11 +213713,11 @@ pInfo->estimatedCost = 1e50; return SQLITE_OK; } - }else{ + }else if( p->op<=SQLITE_INDEX_CONSTRAINT_MATCH ){ int j; for(j=1; jiCol] && p->op & pC->op && p->usable ){ + if( iCol==aColMap[pC->iCol] && (p->op & pC->op) && p->usable ){ pC->iConsIndex = i; idxFlags |= pC->fts5op; } @@ -198845,6 +214359,13 @@ assert( nVal==0 && pMatch==0 && bOrderByRank==0 && bDesc==0 ); assert( pCsr->iLastRowid==LARGEST_INT64 ); assert( pCsr->iFirstRowid==SMALLEST_INT64 ); + if( pTab->pSortCsr->bDesc ){ + pCsr->iLastRowid = pTab->pSortCsr->iFirstRowid; + pCsr->iFirstRowid = pTab->pSortCsr->iLastRowid; + }else{ + pCsr->iLastRowid = pTab->pSortCsr->iLastRowid; + pCsr->iFirstRowid = pTab->pSortCsr->iFirstRowid; + } pCsr->ePlan = FTS5_PLAN_SOURCE; pCsr->pExpr = pTab->pSortCsr->pExpr; rc = fts5CursorFirst(pTab, pCsr, bDesc); @@ -200275,12 +215796,27 @@ ){ assert( nArg==0 ); UNUSED_PARAM2(nArg, apUnused); - sqlite3_result_text(pCtx, "fts5: 2017-08-01 13:24:15 9501e22dfeebdcefa783575e47c60b514d7c2e0cad73b2a496c0bc4b680900a8", -1, SQLITE_TRANSIENT); + sqlite3_result_text(pCtx, "fts5: 2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238b4f9", -1, SQLITE_TRANSIENT); } +/* +** Return true if zName is the extension on one of the shadow tables used +** by this module. +*/ +static int fts5ShadowName(const char *zName){ + static const char *azName[] = { + "config", "content", "data", "docsize", "idx" + }; + unsigned int i; + for(i=0; ip, pBuf->n, SQLITE_STATIC); sqlite3_step(pReplace); rc = sqlite3_reset(pReplace); + sqlite3_bind_null(pReplace, 2); } } return rc; @@ -201511,6 +217049,7 @@ } sqlite3_step(pReplace); rc = sqlite3_reset(pReplace); + sqlite3_bind_null(pReplace, 1); } if( rc==SQLITE_OK && pVal ){ int iNew = p->pConfig->iCookie + 1; @@ -201761,6 +217300,8 @@ int bRemoveDiacritic; /* True if remove_diacritics=1 is set */ int nException; int *aiException; + + unsigned char aCategory[32]; /* True for token char categories */ }; static int fts5UnicodeAddExceptions( @@ -201785,7 +217326,7 @@ if( iCode<128 ){ p->aTokenChar[iCode] = (unsigned char)bTokenChars; }else{ - bToken = sqlite3Fts5UnicodeIsalnum(iCode); + bToken = p->aCategory[sqlite3Fts5UnicodeCategory(iCode)]; assert( (bToken==0 || bToken==1) ); assert( (bTokenChars==0 || bTokenChars==1) ); if( bToken!=bTokenChars && sqlite3Fts5UnicodeIsdiacritic(iCode)==0 ){ @@ -201846,6 +217387,21 @@ return; } +static int unicodeSetCategories(Unicode61Tokenizer *p, const char *zCat){ + const char *z = zCat; + + while( *z ){ + while( *z==' ' || *z=='\t' ) z++; + if( *z && sqlite3Fts5UnicodeCatParse(z, p->aCategory) ){ + return SQLITE_ERROR; + } + while( *z!=' ' && *z!='\t' && *z!='\0' ) z++; + } + + sqlite3Fts5UnicodeAscii(p->aCategory, p->aTokenChar); + return SQLITE_OK; +} + /* ** Create a "unicode61" tokenizer. */ @@ -201864,9 +217420,10 @@ }else{ p = (Unicode61Tokenizer*)sqlite3_malloc(sizeof(Unicode61Tokenizer)); if( p ){ + const char *zCat = "L* N* Co"; int i; memset(p, 0, sizeof(Unicode61Tokenizer)); - memcpy(p->aTokenChar, aAsciiTokenChar, sizeof(aAsciiTokenChar)); + p->bRemoveDiacritic = 1; p->nFold = 64; p->aFold = sqlite3_malloc(p->nFold * sizeof(char)); @@ -201873,7 +217430,19 @@ if( p->aFold==0 ){ rc = SQLITE_NOMEM; } + + /* Search for a "categories" argument */ for(i=0; rc==SQLITE_OK && iaCategory[sqlite3Fts5UnicodeCategory(iCode)] + ^ fts5UnicodeIsException(p, iCode) + ); } static int fts5UnicodeTokenize( @@ -202785,137 +218360,8 @@ /* #include */ -/* -** Return true if the argument corresponds to a unicode codepoint -** classified as either a letter or a number. Otherwise false. -** -** The results are undefined if the value passed to this function -** is less than zero. -*/ -static int sqlite3Fts5UnicodeIsalnum(int c){ - /* Each unsigned integer in the following array corresponds to a contiguous - ** range of unicode codepoints that are not either letters or numbers (i.e. - ** codepoints for which this function should return 0). - ** - ** The most significant 22 bits in each 32-bit value contain the first - ** codepoint in the range. The least significant 10 bits are used to store - ** the size of the range (always at least 1). In other words, the value - ** ((C<<22) + N) represents a range of N codepoints starting with codepoint - ** C. It is not possible to represent a range larger than 1023 codepoints - ** using this format. - */ - static const unsigned int aEntry[] = { - 0x00000030, 0x0000E807, 0x00016C06, 0x0001EC2F, 0x0002AC07, - 0x0002D001, 0x0002D803, 0x0002EC01, 0x0002FC01, 0x00035C01, - 0x0003DC01, 0x000B0804, 0x000B480E, 0x000B9407, 0x000BB401, - 0x000BBC81, 0x000DD401, 0x000DF801, 0x000E1002, 0x000E1C01, - 0x000FD801, 0x00120808, 0x00156806, 0x00162402, 0x00163C01, - 0x00164437, 0x0017CC02, 0x00180005, 0x00181816, 0x00187802, - 0x00192C15, 0x0019A804, 0x0019C001, 0x001B5001, 0x001B580F, - 0x001B9C07, 0x001BF402, 0x001C000E, 0x001C3C01, 0x001C4401, - 0x001CC01B, 0x001E980B, 0x001FAC09, 0x001FD804, 0x00205804, - 0x00206C09, 0x00209403, 0x0020A405, 0x0020C00F, 0x00216403, - 0x00217801, 0x0023901B, 0x00240004, 0x0024E803, 0x0024F812, - 0x00254407, 0x00258804, 0x0025C001, 0x00260403, 0x0026F001, - 0x0026F807, 0x00271C02, 0x00272C03, 0x00275C01, 0x00278802, - 0x0027C802, 0x0027E802, 0x00280403, 0x0028F001, 0x0028F805, - 0x00291C02, 0x00292C03, 0x00294401, 0x0029C002, 0x0029D401, - 0x002A0403, 0x002AF001, 0x002AF808, 0x002B1C03, 0x002B2C03, - 0x002B8802, 0x002BC002, 0x002C0403, 0x002CF001, 0x002CF807, - 0x002D1C02, 0x002D2C03, 0x002D5802, 0x002D8802, 0x002DC001, - 0x002E0801, 0x002EF805, 0x002F1803, 0x002F2804, 0x002F5C01, - 0x002FCC08, 0x00300403, 0x0030F807, 0x00311803, 0x00312804, - 0x00315402, 0x00318802, 0x0031FC01, 0x00320802, 0x0032F001, - 0x0032F807, 0x00331803, 0x00332804, 0x00335402, 0x00338802, - 0x00340802, 0x0034F807, 0x00351803, 0x00352804, 0x00355C01, - 0x00358802, 0x0035E401, 0x00360802, 0x00372801, 0x00373C06, - 0x00375801, 0x00376008, 0x0037C803, 0x0038C401, 0x0038D007, - 0x0038FC01, 0x00391C09, 0x00396802, 0x003AC401, 0x003AD006, - 0x003AEC02, 0x003B2006, 0x003C041F, 0x003CD00C, 0x003DC417, - 0x003E340B, 0x003E6424, 0x003EF80F, 0x003F380D, 0x0040AC14, - 0x00412806, 0x00415804, 0x00417803, 0x00418803, 0x00419C07, - 0x0041C404, 0x0042080C, 0x00423C01, 0x00426806, 0x0043EC01, - 0x004D740C, 0x004E400A, 0x00500001, 0x0059B402, 0x005A0001, - 0x005A6C02, 0x005BAC03, 0x005C4803, 0x005CC805, 0x005D4802, - 0x005DC802, 0x005ED023, 0x005F6004, 0x005F7401, 0x0060000F, - 0x0062A401, 0x0064800C, 0x0064C00C, 0x00650001, 0x00651002, - 0x0066C011, 0x00672002, 0x00677822, 0x00685C05, 0x00687802, - 0x0069540A, 0x0069801D, 0x0069FC01, 0x006A8007, 0x006AA006, - 0x006C0005, 0x006CD011, 0x006D6823, 0x006E0003, 0x006E840D, - 0x006F980E, 0x006FF004, 0x00709014, 0x0070EC05, 0x0071F802, - 0x00730008, 0x00734019, 0x0073B401, 0x0073C803, 0x00770027, - 0x0077F004, 0x007EF401, 0x007EFC03, 0x007F3403, 0x007F7403, - 0x007FB403, 0x007FF402, 0x00800065, 0x0081A806, 0x0081E805, - 0x00822805, 0x0082801A, 0x00834021, 0x00840002, 0x00840C04, - 0x00842002, 0x00845001, 0x00845803, 0x00847806, 0x00849401, - 0x00849C01, 0x0084A401, 0x0084B801, 0x0084E802, 0x00850005, - 0x00852804, 0x00853C01, 0x00864264, 0x00900027, 0x0091000B, - 0x0092704E, 0x00940200, 0x009C0475, 0x009E53B9, 0x00AD400A, - 0x00B39406, 0x00B3BC03, 0x00B3E404, 0x00B3F802, 0x00B5C001, - 0x00B5FC01, 0x00B7804F, 0x00B8C00C, 0x00BA001A, 0x00BA6C59, - 0x00BC00D6, 0x00BFC00C, 0x00C00005, 0x00C02019, 0x00C0A807, - 0x00C0D802, 0x00C0F403, 0x00C26404, 0x00C28001, 0x00C3EC01, - 0x00C64002, 0x00C6580A, 0x00C70024, 0x00C8001F, 0x00C8A81E, - 0x00C94001, 0x00C98020, 0x00CA2827, 0x00CB003F, 0x00CC0100, - 0x01370040, 0x02924037, 0x0293F802, 0x02983403, 0x0299BC10, - 0x029A7C01, 0x029BC008, 0x029C0017, 0x029C8002, 0x029E2402, - 0x02A00801, 0x02A01801, 0x02A02C01, 0x02A08C09, 0x02A0D804, - 0x02A1D004, 0x02A20002, 0x02A2D011, 0x02A33802, 0x02A38012, - 0x02A3E003, 0x02A4980A, 0x02A51C0D, 0x02A57C01, 0x02A60004, - 0x02A6CC1B, 0x02A77802, 0x02A8A40E, 0x02A90C01, 0x02A93002, - 0x02A97004, 0x02A9DC03, 0x02A9EC01, 0x02AAC001, 0x02AAC803, - 0x02AADC02, 0x02AAF802, 0x02AB0401, 0x02AB7802, 0x02ABAC07, - 0x02ABD402, 0x02AF8C0B, 0x03600001, 0x036DFC02, 0x036FFC02, - 0x037FFC01, 0x03EC7801, 0x03ECA401, 0x03EEC810, 0x03F4F802, - 0x03F7F002, 0x03F8001A, 0x03F88007, 0x03F8C023, 0x03F95013, - 0x03F9A004, 0x03FBFC01, 0x03FC040F, 0x03FC6807, 0x03FCEC06, - 0x03FD6C0B, 0x03FF8007, 0x03FFA007, 0x03FFE405, 0x04040003, - 0x0404DC09, 0x0405E411, 0x0406400C, 0x0407402E, 0x040E7C01, - 0x040F4001, 0x04215C01, 0x04247C01, 0x0424FC01, 0x04280403, - 0x04281402, 0x04283004, 0x0428E003, 0x0428FC01, 0x04294009, - 0x0429FC01, 0x042CE407, 0x04400003, 0x0440E016, 0x04420003, - 0x0442C012, 0x04440003, 0x04449C0E, 0x04450004, 0x04460003, - 0x0446CC0E, 0x04471404, 0x045AAC0D, 0x0491C004, 0x05BD442E, - 0x05BE3C04, 0x074000F6, 0x07440027, 0x0744A4B5, 0x07480046, - 0x074C0057, 0x075B0401, 0x075B6C01, 0x075BEC01, 0x075C5401, - 0x075CD401, 0x075D3C01, 0x075DBC01, 0x075E2401, 0x075EA401, - 0x075F0C01, 0x07BBC002, 0x07C0002C, 0x07C0C064, 0x07C2800F, - 0x07C2C40E, 0x07C3040F, 0x07C3440F, 0x07C4401F, 0x07C4C03C, - 0x07C5C02B, 0x07C7981D, 0x07C8402B, 0x07C90009, 0x07C94002, - 0x07CC0021, 0x07CCC006, 0x07CCDC46, 0x07CE0014, 0x07CE8025, - 0x07CF1805, 0x07CF8011, 0x07D0003F, 0x07D10001, 0x07D108B6, - 0x07D3E404, 0x07D4003E, 0x07D50004, 0x07D54018, 0x07D7EC46, - 0x07D9140B, 0x07DA0046, 0x07DC0074, 0x38000401, 0x38008060, - 0x380400F0, - }; - static const unsigned int aAscii[4] = { - 0xFFFFFFFF, 0xFC00FFFF, 0xF8000001, 0xF8000001, - }; - if( (unsigned int)c<128 ){ - return ( (aAscii[c >> 5] & (1 << (c & 0x001F)))==0 ); - }else if( (unsigned int)c<(1<<22) ){ - unsigned int key = (((unsigned int)c)<<10) | 0x000003FF; - int iRes = 0; - int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1; - int iLo = 0; - while( iHi>=iLo ){ - int iTest = (iHi + iLo) / 2; - if( key >= aEntry[iTest] ){ - iRes = iTest; - iLo = iTest+1; - }else{ - iHi = iTest-1; - } - } - assert( aEntry[0]=aEntry[iRes] ); - return (((unsigned int)c) >= ((aEntry[iRes]>>10) + (aEntry[iRes]&0x3FF))); - } - return 1; -} - /* ** If the argument is a codepoint corresponding to a lowercase letter ** in the ASCII range with a diacritic added, return the codepoint @@ -203126,6 +218572,539 @@ return ret; } + +#if 0 +static int sqlite3Fts5UnicodeNCat(void) { + return 32; +} +#endif + +static int sqlite3Fts5UnicodeCatParse(const char *zCat, u8 *aArray){ + aArray[0] = 1; + switch( zCat[0] ){ + case 'C': + switch( zCat[1] ){ + case 'c': aArray[1] = 1; break; + case 'f': aArray[2] = 1; break; + case 'n': aArray[3] = 1; break; + case 's': aArray[4] = 1; break; + case 'o': aArray[31] = 1; break; + case '*': + aArray[1] = 1; + aArray[2] = 1; + aArray[3] = 1; + aArray[4] = 1; + aArray[31] = 1; + break; + default: return 1; } + break; + + case 'L': + switch( zCat[1] ){ + case 'l': aArray[5] = 1; break; + case 'm': aArray[6] = 1; break; + case 'o': aArray[7] = 1; break; + case 't': aArray[8] = 1; break; + case 'u': aArray[9] = 1; break; + case 'C': aArray[30] = 1; break; + case '*': + aArray[5] = 1; + aArray[6] = 1; + aArray[7] = 1; + aArray[8] = 1; + aArray[9] = 1; + aArray[30] = 1; + break; + default: return 1; } + break; + + case 'M': + switch( zCat[1] ){ + case 'c': aArray[10] = 1; break; + case 'e': aArray[11] = 1; break; + case 'n': aArray[12] = 1; break; + case '*': + aArray[10] = 1; + aArray[11] = 1; + aArray[12] = 1; + break; + default: return 1; } + break; + + case 'N': + switch( zCat[1] ){ + case 'd': aArray[13] = 1; break; + case 'l': aArray[14] = 1; break; + case 'o': aArray[15] = 1; break; + case '*': + aArray[13] = 1; + aArray[14] = 1; + aArray[15] = 1; + break; + default: return 1; } + break; + + case 'P': + switch( zCat[1] ){ + case 'c': aArray[16] = 1; break; + case 'd': aArray[17] = 1; break; + case 'e': aArray[18] = 1; break; + case 'f': aArray[19] = 1; break; + case 'i': aArray[20] = 1; break; + case 'o': aArray[21] = 1; break; + case 's': aArray[22] = 1; break; + case '*': + aArray[16] = 1; + aArray[17] = 1; + aArray[18] = 1; + aArray[19] = 1; + aArray[20] = 1; + aArray[21] = 1; + aArray[22] = 1; + break; + default: return 1; } + break; + + case 'S': + switch( zCat[1] ){ + case 'c': aArray[23] = 1; break; + case 'k': aArray[24] = 1; break; + case 'm': aArray[25] = 1; break; + case 'o': aArray[26] = 1; break; + case '*': + aArray[23] = 1; + aArray[24] = 1; + aArray[25] = 1; + aArray[26] = 1; + break; + default: return 1; } + break; + + case 'Z': + switch( zCat[1] ){ + case 'l': aArray[27] = 1; break; + case 'p': aArray[28] = 1; break; + case 's': aArray[29] = 1; break; + case '*': + aArray[27] = 1; + aArray[28] = 1; + aArray[29] = 1; + break; + default: return 1; } + break; + + } + return 0; +} + +static u16 aFts5UnicodeBlock[] = { + 0, 1471, 1753, 1760, 1760, 1760, 1760, 1760, 1760, 1760, + 1760, 1760, 1760, 1760, 1760, 1763, 1765, + }; +static u16 aFts5UnicodeMap[] = { + 0, 32, 33, 36, 37, 40, 41, 42, 43, 44, + 45, 46, 48, 58, 60, 63, 65, 91, 92, 93, + 94, 95, 96, 97, 123, 124, 125, 126, 127, 160, + 161, 162, 166, 167, 168, 169, 170, 171, 172, 173, + 174, 175, 176, 177, 178, 180, 181, 182, 184, 185, + 186, 187, 188, 191, 192, 215, 216, 223, 247, 248, + 256, 312, 313, 329, 330, 377, 383, 385, 387, 388, + 391, 394, 396, 398, 402, 403, 405, 406, 409, 412, + 414, 415, 417, 418, 423, 427, 428, 431, 434, 436, + 437, 440, 442, 443, 444, 446, 448, 452, 453, 454, + 455, 456, 457, 458, 459, 460, 461, 477, 478, 496, + 497, 498, 499, 500, 503, 505, 506, 564, 570, 572, + 573, 575, 577, 580, 583, 584, 592, 660, 661, 688, + 706, 710, 722, 736, 741, 748, 749, 750, 751, 768, + 880, 884, 885, 886, 890, 891, 894, 900, 902, 903, + 904, 908, 910, 912, 913, 931, 940, 975, 977, 978, + 981, 984, 1008, 1012, 1014, 1015, 1018, 1020, 1021, 1072, + 1120, 1154, 1155, 1160, 1162, 1217, 1231, 1232, 1329, 1369, + 1370, 1377, 1417, 1418, 1423, 1425, 1470, 1471, 1472, 1473, + 1475, 1476, 1478, 1479, 1488, 1520, 1523, 1536, 1542, 1545, + 1547, 1548, 1550, 1552, 1563, 1566, 1568, 1600, 1601, 1611, + 1632, 1642, 1646, 1648, 1649, 1748, 1749, 1750, 1757, 1758, + 1759, 1765, 1767, 1769, 1770, 1774, 1776, 1786, 1789, 1791, + 1792, 1807, 1808, 1809, 1810, 1840, 1869, 1958, 1969, 1984, + 1994, 2027, 2036, 2038, 2039, 2042, 2048, 2070, 2074, 2075, + 2084, 2085, 2088, 2089, 2096, 2112, 2137, 2142, 2208, 2210, + 2276, 2304, 2307, 2308, 2362, 2363, 2364, 2365, 2366, 2369, + 2377, 2381, 2382, 2384, 2385, 2392, 2402, 2404, 2406, 2416, + 2417, 2418, 2425, 2433, 2434, 2437, 2447, 2451, 2474, 2482, + 2486, 2492, 2493, 2494, 2497, 2503, 2507, 2509, 2510, 2519, + 2524, 2527, 2530, 2534, 2544, 2546, 2548, 2554, 2555, 2561, + 2563, 2565, 2575, 2579, 2602, 2610, 2613, 2616, 2620, 2622, + 2625, 2631, 2635, 2641, 2649, 2654, 2662, 2672, 2674, 2677, + 2689, 2691, 2693, 2703, 2707, 2730, 2738, 2741, 2748, 2749, + 2750, 2753, 2759, 2761, 2763, 2765, 2768, 2784, 2786, 2790, + 2800, 2801, 2817, 2818, 2821, 2831, 2835, 2858, 2866, 2869, + 2876, 2877, 2878, 2879, 2880, 2881, 2887, 2891, 2893, 2902, + 2903, 2908, 2911, 2914, 2918, 2928, 2929, 2930, 2946, 2947, + 2949, 2958, 2962, 2969, 2972, 2974, 2979, 2984, 2990, 3006, + 3008, 3009, 3014, 3018, 3021, 3024, 3031, 3046, 3056, 3059, + 3065, 3066, 3073, 3077, 3086, 3090, 3114, 3125, 3133, 3134, + 3137, 3142, 3146, 3157, 3160, 3168, 3170, 3174, 3192, 3199, + 3202, 3205, 3214, 3218, 3242, 3253, 3260, 3261, 3262, 3263, + 3264, 3270, 3271, 3274, 3276, 3285, 3294, 3296, 3298, 3302, + 3313, 3330, 3333, 3342, 3346, 3389, 3390, 3393, 3398, 3402, + 3405, 3406, 3415, 3424, 3426, 3430, 3440, 3449, 3450, 3458, + 3461, 3482, 3507, 3517, 3520, 3530, 3535, 3538, 3542, 3544, + 3570, 3572, 3585, 3633, 3634, 3636, 3647, 3648, 3654, 3655, + 3663, 3664, 3674, 3713, 3716, 3719, 3722, 3725, 3732, 3737, + 3745, 3749, 3751, 3754, 3757, 3761, 3762, 3764, 3771, 3773, + 3776, 3782, 3784, 3792, 3804, 3840, 3841, 3844, 3859, 3860, + 3861, 3864, 3866, 3872, 3882, 3892, 3893, 3894, 3895, 3896, + 3897, 3898, 3899, 3900, 3901, 3902, 3904, 3913, 3953, 3967, + 3968, 3973, 3974, 3976, 3981, 3993, 4030, 4038, 4039, 4046, + 4048, 4053, 4057, 4096, 4139, 4141, 4145, 4146, 4152, 4153, + 4155, 4157, 4159, 4160, 4170, 4176, 4182, 4184, 4186, 4190, + 4193, 4194, 4197, 4199, 4206, 4209, 4213, 4226, 4227, 4229, + 4231, 4237, 4238, 4239, 4240, 4250, 4253, 4254, 4256, 4295, + 4301, 4304, 4347, 4348, 4349, 4682, 4688, 4696, 4698, 4704, + 4746, 4752, 4786, 4792, 4800, 4802, 4808, 4824, 4882, 4888, + 4957, 4960, 4969, 4992, 5008, 5024, 5120, 5121, 5741, 5743, + 5760, 5761, 5787, 5788, 5792, 5867, 5870, 5888, 5902, 5906, + 5920, 5938, 5941, 5952, 5970, 5984, 5998, 6002, 6016, 6068, + 6070, 6071, 6078, 6086, 6087, 6089, 6100, 6103, 6104, 6107, + 6108, 6109, 6112, 6128, 6144, 6150, 6151, 6155, 6158, 6160, + 6176, 6211, 6212, 6272, 6313, 6314, 6320, 6400, 6432, 6435, + 6439, 6441, 6448, 6450, 6451, 6457, 6464, 6468, 6470, 6480, + 6512, 6528, 6576, 6593, 6600, 6608, 6618, 6622, 6656, 6679, + 6681, 6686, 6688, 6741, 6742, 6743, 6744, 6752, 6753, 6754, + 6755, 6757, 6765, 6771, 6783, 6784, 6800, 6816, 6823, 6824, + 6912, 6916, 6917, 6964, 6965, 6966, 6971, 6972, 6973, 6978, + 6979, 6981, 6992, 7002, 7009, 7019, 7028, 7040, 7042, 7043, + 7073, 7074, 7078, 7080, 7082, 7083, 7084, 7086, 7088, 7098, + 7142, 7143, 7144, 7146, 7149, 7150, 7151, 7154, 7164, 7168, + 7204, 7212, 7220, 7222, 7227, 7232, 7245, 7248, 7258, 7288, + 7294, 7360, 7376, 7379, 7380, 7393, 7394, 7401, 7405, 7406, + 7410, 7412, 7413, 7424, 7468, 7531, 7544, 7545, 7579, 7616, + 7676, 7680, 7830, 7838, 7936, 7944, 7952, 7960, 7968, 7976, + 7984, 7992, 8000, 8008, 8016, 8025, 8027, 8029, 8031, 8033, + 8040, 8048, 8064, 8072, 8080, 8088, 8096, 8104, 8112, 8118, + 8120, 8124, 8125, 8126, 8127, 8130, 8134, 8136, 8140, 8141, + 8144, 8150, 8152, 8157, 8160, 8168, 8173, 8178, 8182, 8184, + 8188, 8189, 8192, 8203, 8208, 8214, 8216, 8217, 8218, 8219, + 8221, 8222, 8223, 8224, 8232, 8233, 8234, 8239, 8240, 8249, + 8250, 8251, 8255, 8257, 8260, 8261, 8262, 8263, 8274, 8275, + 8276, 8277, 8287, 8288, 8298, 8304, 8305, 8308, 8314, 8317, + 8318, 8319, 8320, 8330, 8333, 8334, 8336, 8352, 8400, 8413, + 8417, 8418, 8421, 8448, 8450, 8451, 8455, 8456, 8458, 8459, + 8462, 8464, 8467, 8468, 8469, 8470, 8472, 8473, 8478, 8484, + 8485, 8486, 8487, 8488, 8489, 8490, 8494, 8495, 8496, 8500, + 8501, 8505, 8506, 8508, 8510, 8512, 8517, 8519, 8522, 8523, + 8524, 8526, 8527, 8528, 8544, 8579, 8581, 8585, 8592, 8597, + 8602, 8604, 8608, 8609, 8611, 8612, 8614, 8615, 8622, 8623, + 8654, 8656, 8658, 8659, 8660, 8661, 8692, 8960, 8968, 8972, + 8992, 8994, 9001, 9002, 9003, 9084, 9085, 9115, 9140, 9180, + 9186, 9216, 9280, 9312, 9372, 9450, 9472, 9655, 9656, 9665, + 9666, 9720, 9728, 9839, 9840, 9985, 10088, 10089, 10090, 10091, + 10092, 10093, 10094, 10095, 10096, 10097, 10098, 10099, 10100, 10101, + 10102, 10132, 10176, 10181, 10182, 10183, 10214, 10215, 10216, 10217, + 10218, 10219, 10220, 10221, 10222, 10223, 10224, 10240, 10496, 10627, + 10628, 10629, 10630, 10631, 10632, 10633, 10634, 10635, 10636, 10637, + 10638, 10639, 10640, 10641, 10642, 10643, 10644, 10645, 10646, 10647, + 10648, 10649, 10712, 10713, 10714, 10715, 10716, 10748, 10749, 10750, + 11008, 11056, 11077, 11079, 11088, 11264, 11312, 11360, 11363, 11365, + 11367, 11374, 11377, 11378, 11380, 11381, 11383, 11388, 11390, 11393, + 11394, 11492, 11493, 11499, 11503, 11506, 11513, 11517, 11518, 11520, + 11559, 11565, 11568, 11631, 11632, 11647, 11648, 11680, 11688, 11696, + 11704, 11712, 11720, 11728, 11736, 11744, 11776, 11778, 11779, 11780, + 11781, 11782, 11785, 11786, 11787, 11788, 11789, 11790, 11799, 11800, + 11802, 11803, 11804, 11805, 11806, 11808, 11809, 11810, 11811, 11812, + 11813, 11814, 11815, 11816, 11817, 11818, 11823, 11824, 11834, 11904, + 11931, 12032, 12272, 12288, 12289, 12292, 12293, 12294, 12295, 12296, + 12297, 12298, 12299, 12300, 12301, 12302, 12303, 12304, 12305, 12306, + 12308, 12309, 12310, 12311, 12312, 12313, 12314, 12315, 12316, 12317, + 12318, 12320, 12321, 12330, 12334, 12336, 12337, 12342, 12344, 12347, + 12348, 12349, 12350, 12353, 12441, 12443, 12445, 12447, 12448, 12449, + 12539, 12540, 12543, 12549, 12593, 12688, 12690, 12694, 12704, 12736, + 12784, 12800, 12832, 12842, 12872, 12880, 12881, 12896, 12928, 12938, + 12977, 12992, 13056, 13312, 19893, 19904, 19968, 40908, 40960, 40981, + 40982, 42128, 42192, 42232, 42238, 42240, 42508, 42509, 42512, 42528, + 42538, 42560, 42606, 42607, 42608, 42611, 42612, 42622, 42623, 42624, + 42655, 42656, 42726, 42736, 42738, 42752, 42775, 42784, 42786, 42800, + 42802, 42864, 42865, 42873, 42878, 42888, 42889, 42891, 42896, 42912, + 43000, 43002, 43003, 43010, 43011, 43014, 43015, 43019, 43020, 43043, + 43045, 43047, 43048, 43056, 43062, 43064, 43065, 43072, 43124, 43136, + 43138, 43188, 43204, 43214, 43216, 43232, 43250, 43256, 43259, 43264, + 43274, 43302, 43310, 43312, 43335, 43346, 43359, 43360, 43392, 43395, + 43396, 43443, 43444, 43446, 43450, 43452, 43453, 43457, 43471, 43472, + 43486, 43520, 43561, 43567, 43569, 43571, 43573, 43584, 43587, 43588, + 43596, 43597, 43600, 43612, 43616, 43632, 43633, 43639, 43642, 43643, + 43648, 43696, 43697, 43698, 43701, 43703, 43705, 43710, 43712, 43713, + 43714, 43739, 43741, 43742, 43744, 43755, 43756, 43758, 43760, 43762, + 43763, 43765, 43766, 43777, 43785, 43793, 43808, 43816, 43968, 44003, + 44005, 44006, 44008, 44009, 44011, 44012, 44013, 44016, 44032, 55203, + 55216, 55243, 55296, 56191, 56319, 57343, 57344, 63743, 63744, 64112, + 64256, 64275, 64285, 64286, 64287, 64297, 64298, 64312, 64318, 64320, + 64323, 64326, 64434, 64467, 64830, 64831, 64848, 64914, 65008, 65020, + 65021, 65024, 65040, 65047, 65048, 65049, 65056, 65072, 65073, 65075, + 65077, 65078, 65079, 65080, 65081, 65082, 65083, 65084, 65085, 65086, + 65087, 65088, 65089, 65090, 65091, 65092, 65093, 65095, 65096, 65097, + 65101, 65104, 65108, 65112, 65113, 65114, 65115, 65116, 65117, 65118, + 65119, 65122, 65123, 65124, 65128, 65129, 65130, 65136, 65142, 65279, + 65281, 65284, 65285, 65288, 65289, 65290, 65291, 65292, 65293, 65294, + 65296, 65306, 65308, 65311, 65313, 65339, 65340, 65341, 65342, 65343, + 65344, 65345, 65371, 65372, 65373, 65374, 65375, 65376, 65377, 65378, + 65379, 65380, 65382, 65392, 65393, 65438, 65440, 65474, 65482, 65490, + 65498, 65504, 65506, 65507, 65508, 65509, 65512, 65513, 65517, 65529, + 65532, 0, 13, 40, 60, 63, 80, 128, 256, 263, + 311, 320, 373, 377, 394, 400, 464, 509, 640, 672, + 768, 800, 816, 833, 834, 842, 896, 927, 928, 968, + 976, 977, 1024, 1064, 1104, 1184, 2048, 2056, 2058, 2103, + 2108, 2111, 2135, 2136, 2304, 2326, 2335, 2336, 2367, 2432, + 2494, 2560, 2561, 2565, 2572, 2576, 2581, 2585, 2616, 2623, + 2624, 2640, 2656, 2685, 2687, 2816, 2873, 2880, 2904, 2912, + 2936, 3072, 3680, 4096, 4097, 4098, 4099, 4152, 4167, 4178, + 4198, 4224, 4226, 4227, 4272, 4275, 4279, 4281, 4283, 4285, + 4286, 4304, 4336, 4352, 4355, 4391, 4396, 4397, 4406, 4416, + 4480, 4482, 4483, 4531, 4534, 4543, 4545, 4549, 4560, 5760, + 5803, 5804, 5805, 5806, 5808, 5814, 5815, 5824, 8192, 9216, + 9328, 12288, 26624, 28416, 28496, 28497, 28559, 28563, 45056, 53248, + 53504, 53545, 53605, 53607, 53610, 53613, 53619, 53627, 53635, 53637, + 53644, 53674, 53678, 53760, 53826, 53829, 54016, 54112, 54272, 54298, + 54324, 54350, 54358, 54376, 54402, 54428, 54430, 54434, 54437, 54441, + 54446, 54454, 54459, 54461, 54469, 54480, 54506, 54532, 54535, 54541, + 54550, 54558, 54584, 54587, 54592, 54598, 54602, 54610, 54636, 54662, + 54688, 54714, 54740, 54766, 54792, 54818, 54844, 54870, 54896, 54922, + 54952, 54977, 54978, 55003, 55004, 55010, 55035, 55036, 55061, 55062, + 55068, 55093, 55094, 55119, 55120, 55126, 55151, 55152, 55177, 55178, + 55184, 55209, 55210, 55235, 55236, 55242, 55246, 60928, 60933, 60961, + 60964, 60967, 60969, 60980, 60985, 60987, 60994, 60999, 61001, 61003, + 61005, 61009, 61012, 61015, 61017, 61019, 61021, 61023, 61025, 61028, + 61031, 61036, 61044, 61049, 61054, 61056, 61067, 61089, 61093, 61099, + 61168, 61440, 61488, 61600, 61617, 61633, 61649, 61696, 61712, 61744, + 61808, 61926, 61968, 62016, 62032, 62208, 62256, 62263, 62336, 62368, + 62406, 62432, 62464, 62528, 62530, 62713, 62720, 62784, 62800, 62971, + 63045, 63104, 63232, 0, 42710, 42752, 46900, 46912, 47133, 63488, + 1, 32, 256, 0, 65533, + }; +static u16 aFts5UnicodeData[] = { + 1025, 61, 117, 55, 117, 54, 50, 53, 57, 53, + 49, 85, 333, 85, 121, 85, 841, 54, 53, 50, + 56, 48, 56, 837, 54, 57, 50, 57, 1057, 61, + 53, 151, 58, 53, 56, 58, 39, 52, 57, 34, + 58, 56, 58, 57, 79, 56, 37, 85, 56, 47, + 39, 51, 111, 53, 745, 57, 233, 773, 57, 261, + 1822, 37, 542, 37, 1534, 222, 69, 73, 37, 126, + 126, 73, 69, 137, 37, 73, 37, 105, 101, 73, + 37, 73, 37, 190, 158, 37, 126, 126, 73, 37, + 126, 94, 37, 39, 94, 69, 135, 41, 40, 37, + 41, 40, 37, 41, 40, 37, 542, 37, 606, 37, + 41, 40, 37, 126, 73, 37, 1886, 197, 73, 37, + 73, 69, 126, 105, 37, 286, 2181, 39, 869, 582, + 152, 390, 472, 166, 248, 38, 56, 38, 568, 3596, + 158, 38, 56, 94, 38, 101, 53, 88, 41, 53, + 105, 41, 73, 37, 553, 297, 1125, 94, 37, 105, + 101, 798, 133, 94, 57, 126, 94, 37, 1641, 1541, + 1118, 58, 172, 75, 1790, 478, 37, 2846, 1225, 38, + 213, 1253, 53, 49, 55, 1452, 49, 44, 53, 76, + 53, 76, 53, 44, 871, 103, 85, 162, 121, 85, + 55, 85, 90, 364, 53, 85, 1031, 38, 327, 684, + 333, 149, 71, 44, 3175, 53, 39, 236, 34, 58, + 204, 70, 76, 58, 140, 71, 333, 103, 90, 39, + 469, 34, 39, 44, 967, 876, 2855, 364, 39, 333, + 1063, 300, 70, 58, 117, 38, 711, 140, 38, 300, + 38, 108, 38, 172, 501, 807, 108, 53, 39, 359, + 876, 108, 42, 1735, 44, 42, 44, 39, 106, 268, + 138, 44, 74, 39, 236, 327, 76, 85, 333, 53, + 38, 199, 231, 44, 74, 263, 71, 711, 231, 39, + 135, 44, 39, 106, 140, 74, 74, 44, 39, 42, + 71, 103, 76, 333, 71, 87, 207, 58, 55, 76, + 42, 199, 71, 711, 231, 71, 71, 71, 44, 106, + 76, 76, 108, 44, 135, 39, 333, 76, 103, 44, + 76, 42, 295, 103, 711, 231, 71, 167, 44, 39, + 106, 172, 76, 42, 74, 44, 39, 71, 76, 333, + 53, 55, 44, 74, 263, 71, 711, 231, 71, 167, + 44, 39, 42, 44, 42, 140, 74, 74, 44, 44, + 42, 71, 103, 76, 333, 58, 39, 207, 44, 39, + 199, 103, 135, 71, 39, 71, 71, 103, 391, 74, + 44, 74, 106, 106, 44, 39, 42, 333, 111, 218, + 55, 58, 106, 263, 103, 743, 327, 167, 39, 108, + 138, 108, 140, 76, 71, 71, 76, 333, 239, 58, + 74, 263, 103, 743, 327, 167, 44, 39, 42, 44, + 170, 44, 74, 74, 76, 74, 39, 71, 76, 333, + 71, 74, 263, 103, 1319, 39, 106, 140, 106, 106, + 44, 39, 42, 71, 76, 333, 207, 58, 199, 74, + 583, 775, 295, 39, 231, 44, 106, 108, 44, 266, + 74, 53, 1543, 44, 71, 236, 55, 199, 38, 268, + 53, 333, 85, 71, 39, 71, 39, 39, 135, 231, + 103, 39, 39, 71, 135, 44, 71, 204, 76, 39, + 167, 38, 204, 333, 135, 39, 122, 501, 58, 53, + 122, 76, 218, 333, 335, 58, 44, 58, 44, 58, + 44, 54, 50, 54, 50, 74, 263, 1159, 460, 42, + 172, 53, 76, 167, 364, 1164, 282, 44, 218, 90, + 181, 154, 85, 1383, 74, 140, 42, 204, 42, 76, + 74, 76, 39, 333, 213, 199, 74, 76, 135, 108, + 39, 106, 71, 234, 103, 140, 423, 44, 74, 76, + 202, 44, 39, 42, 333, 106, 44, 90, 1225, 41, + 41, 1383, 53, 38, 10631, 135, 231, 39, 135, 1319, + 135, 1063, 135, 231, 39, 135, 487, 1831, 135, 2151, + 108, 309, 655, 519, 346, 2727, 49, 19847, 85, 551, + 61, 839, 54, 50, 2407, 117, 110, 423, 135, 108, + 583, 108, 85, 583, 76, 423, 103, 76, 1671, 76, + 42, 236, 266, 44, 74, 364, 117, 38, 117, 55, + 39, 44, 333, 335, 213, 49, 149, 108, 61, 333, + 1127, 38, 1671, 1319, 44, 39, 2247, 935, 108, 138, + 76, 106, 74, 44, 202, 108, 58, 85, 333, 967, + 167, 1415, 554, 231, 74, 333, 47, 1114, 743, 76, + 106, 85, 1703, 42, 44, 42, 236, 44, 42, 44, + 74, 268, 202, 332, 44, 333, 333, 245, 38, 213, + 140, 42, 1511, 44, 42, 172, 42, 44, 170, 44, + 74, 231, 333, 245, 346, 300, 314, 76, 42, 967, + 42, 140, 74, 76, 42, 44, 74, 71, 333, 1415, + 44, 42, 76, 106, 44, 42, 108, 74, 149, 1159, + 266, 268, 74, 76, 181, 333, 103, 333, 967, 198, + 85, 277, 108, 53, 428, 42, 236, 135, 44, 135, + 74, 44, 71, 1413, 2022, 421, 38, 1093, 1190, 1260, + 140, 4830, 261, 3166, 261, 265, 197, 201, 261, 265, + 261, 265, 197, 201, 261, 41, 41, 41, 94, 229, + 265, 453, 261, 264, 261, 264, 261, 264, 165, 69, + 137, 40, 56, 37, 120, 101, 69, 137, 40, 120, + 133, 69, 137, 120, 261, 169, 120, 101, 69, 137, + 40, 88, 381, 162, 209, 85, 52, 51, 54, 84, + 51, 54, 52, 277, 59, 60, 162, 61, 309, 52, + 51, 149, 80, 117, 57, 54, 50, 373, 57, 53, + 48, 341, 61, 162, 194, 47, 38, 207, 121, 54, + 50, 38, 335, 121, 54, 50, 422, 855, 428, 139, + 44, 107, 396, 90, 41, 154, 41, 90, 37, 105, + 69, 105, 37, 58, 41, 90, 57, 169, 218, 41, + 58, 41, 58, 41, 58, 137, 58, 37, 137, 37, + 135, 37, 90, 69, 73, 185, 94, 101, 58, 57, + 90, 37, 58, 527, 1134, 94, 142, 47, 185, 186, + 89, 154, 57, 90, 57, 90, 57, 250, 57, 1018, + 89, 90, 57, 58, 57, 1018, 8601, 282, 153, 666, + 89, 250, 54, 50, 2618, 57, 986, 825, 1306, 217, + 602, 1274, 378, 1935, 2522, 719, 5882, 57, 314, 57, + 1754, 281, 3578, 57, 4634, 3322, 54, 50, 54, 50, + 54, 50, 54, 50, 54, 50, 54, 50, 54, 50, + 975, 1434, 185, 54, 50, 1017, 54, 50, 54, 50, + 54, 50, 54, 50, 54, 50, 537, 8218, 4217, 54, + 50, 54, 50, 54, 50, 54, 50, 54, 50, 54, + 50, 54, 50, 54, 50, 54, 50, 54, 50, 54, + 50, 2041, 54, 50, 54, 50, 1049, 54, 50, 8281, + 1562, 697, 90, 217, 346, 1513, 1509, 126, 73, 69, + 254, 105, 37, 94, 37, 94, 165, 70, 105, 37, + 3166, 37, 218, 158, 108, 94, 149, 47, 85, 1221, + 37, 37, 1799, 38, 53, 44, 743, 231, 231, 231, + 231, 231, 231, 231, 231, 1036, 85, 52, 51, 52, + 51, 117, 52, 51, 53, 52, 51, 309, 49, 85, + 49, 53, 52, 51, 85, 52, 51, 54, 50, 54, + 50, 54, 50, 54, 50, 181, 38, 341, 81, 858, + 2874, 6874, 410, 61, 117, 58, 38, 39, 46, 54, + 50, 54, 50, 54, 50, 54, 50, 54, 50, 90, + 54, 50, 54, 50, 54, 50, 54, 50, 49, 54, + 82, 58, 302, 140, 74, 49, 166, 90, 110, 38, + 39, 53, 90, 2759, 76, 88, 70, 39, 49, 2887, + 53, 102, 39, 1319, 3015, 90, 143, 346, 871, 1178, + 519, 1018, 335, 986, 271, 58, 495, 1050, 335, 1274, + 495, 2042, 8218, 39, 39, 2074, 39, 39, 679, 38, + 36583, 1786, 1287, 198, 85, 8583, 38, 117, 519, 333, + 71, 1502, 39, 44, 107, 53, 332, 53, 38, 798, + 44, 2247, 334, 76, 213, 760, 294, 88, 478, 69, + 2014, 38, 261, 190, 350, 38, 88, 158, 158, 382, + 70, 37, 231, 44, 103, 44, 135, 44, 743, 74, + 76, 42, 154, 207, 90, 55, 58, 1671, 149, 74, + 1607, 522, 44, 85, 333, 588, 199, 117, 39, 333, + 903, 268, 85, 743, 364, 74, 53, 935, 108, 42, + 1511, 44, 74, 140, 74, 44, 138, 437, 38, 333, + 85, 1319, 204, 74, 76, 74, 76, 103, 44, 263, + 44, 42, 333, 149, 519, 38, 199, 122, 39, 42, + 1543, 44, 39, 108, 71, 76, 167, 76, 39, 44, + 39, 71, 38, 85, 359, 42, 76, 74, 85, 39, + 70, 42, 44, 199, 199, 199, 231, 231, 1127, 74, + 44, 74, 44, 74, 53, 42, 44, 333, 39, 39, + 743, 1575, 36, 68, 68, 36, 63, 63, 11719, 3399, + 229, 165, 39, 44, 327, 57, 423, 167, 39, 71, + 71, 3463, 536, 11623, 54, 50, 2055, 1735, 391, 55, + 58, 524, 245, 54, 50, 53, 236, 53, 81, 80, + 54, 50, 54, 50, 54, 50, 54, 50, 54, 50, + 54, 50, 54, 50, 54, 50, 85, 54, 50, 149, + 112, 117, 149, 49, 54, 50, 54, 50, 54, 50, + 117, 57, 49, 121, 53, 55, 85, 167, 4327, 34, + 117, 55, 117, 54, 50, 53, 57, 53, 49, 85, + 333, 85, 121, 85, 841, 54, 53, 50, 56, 48, + 56, 837, 54, 57, 50, 57, 54, 50, 53, 54, + 50, 85, 327, 38, 1447, 70, 999, 199, 199, 199, + 103, 87, 57, 56, 58, 87, 58, 153, 90, 98, + 90, 391, 839, 615, 71, 487, 455, 3943, 117, 1455, + 314, 1710, 143, 570, 47, 410, 1466, 44, 935, 1575, + 999, 143, 551, 46, 263, 46, 967, 53, 1159, 263, + 53, 174, 1289, 1285, 2503, 333, 199, 39, 1415, 71, + 39, 743, 53, 271, 711, 207, 53, 839, 53, 1799, + 71, 39, 108, 76, 140, 135, 103, 871, 108, 44, + 271, 309, 935, 79, 53, 1735, 245, 711, 271, 615, + 271, 2343, 1007, 42, 44, 42, 1703, 492, 245, 655, + 333, 76, 42, 1447, 106, 140, 74, 76, 85, 34, + 149, 807, 333, 108, 1159, 172, 42, 268, 333, 149, + 76, 42, 1543, 106, 300, 74, 135, 149, 333, 1383, + 44, 42, 44, 74, 204, 42, 44, 333, 28135, 3182, + 149, 34279, 18215, 2215, 39, 1482, 140, 422, 71, 7898, + 1274, 1946, 74, 108, 122, 202, 258, 268, 90, 236, + 986, 140, 1562, 2138, 108, 58, 2810, 591, 841, 837, + 841, 229, 581, 841, 837, 41, 73, 41, 73, 137, + 265, 133, 37, 229, 357, 841, 837, 73, 137, 265, + 233, 837, 73, 137, 169, 41, 233, 837, 841, 837, + 841, 837, 841, 837, 841, 837, 841, 837, 841, 901, + 809, 57, 805, 57, 197, 809, 57, 805, 57, 197, + 809, 57, 805, 57, 197, 809, 57, 805, 57, 197, + 809, 57, 805, 57, 197, 94, 1613, 135, 871, 71, + 39, 39, 327, 135, 39, 39, 39, 39, 39, 39, + 103, 71, 39, 39, 39, 39, 39, 39, 71, 39, + 135, 231, 135, 135, 39, 327, 551, 103, 167, 551, + 89, 1434, 3226, 506, 474, 506, 506, 367, 1018, 1946, + 1402, 954, 1402, 314, 90, 1082, 218, 2266, 666, 1210, + 186, 570, 2042, 58, 5850, 154, 2010, 154, 794, 2266, + 378, 2266, 3738, 39, 39, 39, 39, 39, 39, 17351, + 34, 3074, 7692, 63, 63, + }; + +static int sqlite3Fts5UnicodeCategory(int iCode) { + int iRes = -1; + int iHi; + int iLo; + int ret; + u16 iKey; + + if( iCode>=(1<<20) ){ + return 0; + } + iLo = aFts5UnicodeBlock[(iCode>>16)]; + iHi = aFts5UnicodeBlock[1+(iCode>>16)]; + iKey = (iCode & 0xFFFF); + while( iHi>iLo ){ + int iTest = (iHi + iLo) / 2; + assert( iTest>=iLo && iTest=aFts5UnicodeMap[iTest] ){ + iRes = iTest; + iLo = iTest+1; + }else{ + iHi = iTest; + } + } + + if( iRes<0 ) return 0; + if( iKey>=(aFts5UnicodeMap[iRes]+(aFts5UnicodeData[iRes]>>5)) ) return 0; + ret = aFts5UnicodeData[iRes] & 0x1F; + if( ret!=30 ) return ret; + return ((iKey - aFts5UnicodeMap[iRes]) & 0x01) ? 5 : 9; +} + +static void sqlite3Fts5UnicodeAscii(u8 *aArray, u8 *aAscii){ + int i = 0; + int iTbl = 0; + while( i<128 ){ + int bToken = aArray[ aFts5UnicodeData[iTbl] & 0x1F ]; + int n = (aFts5UnicodeData[iTbl] >> 5) + i; + for(; i<128 && i)); +** +** One row for each term instance in the database. */ @@ -203518,7 +219502,7 @@ char *zFts5Db; /* Db containing fts5 table */ sqlite3 *db; /* Database handle */ Fts5Global *pGlobal; /* FTS5 global object for this database */ - int eType; /* FTS5_VOCAB_COL or ROW */ + int eType; /* FTS5_VOCAB_COL, ROW or INSTANCE */ }; struct Fts5VocabCursor { @@ -203538,16 +219522,22 @@ i64 *aCnt; i64 *aDoc; - /* Output values used by 'row' and 'col' tables */ + /* Output values used by all tables. */ i64 rowid; /* This table's current rowid value */ Fts5Buffer term; /* Current value of 'term' column */ + + /* Output values Used by 'instance' tables only */ + i64 iInstPos; + int iInstOff; }; -#define FTS5_VOCAB_COL 0 -#define FTS5_VOCAB_ROW 1 +#define FTS5_VOCAB_COL 0 +#define FTS5_VOCAB_ROW 1 +#define FTS5_VOCAB_INSTANCE 2 #define FTS5_VOCAB_COL_SCHEMA "term, col, doc, cnt" #define FTS5_VOCAB_ROW_SCHEMA "term, doc, cnt" +#define FTS5_VOCAB_INST_SCHEMA "term, doc, col, offset" /* ** Bits for the mask used as the idxNum value by xBestIndex/xFilter. @@ -203575,6 +219565,9 @@ if( sqlite3_stricmp(zCopy, "row")==0 ){ *peType = FTS5_VOCAB_ROW; }else + if( sqlite3_stricmp(zCopy, "instance")==0 ){ + *peType = FTS5_VOCAB_INSTANCE; + }else { *pzErr = sqlite3_mprintf("fts5vocab: unknown table type: %Q", zCopy); rc = SQLITE_ERROR; @@ -203635,7 +219628,8 @@ ){ const char *azSchema[] = { "CREATE TABlE vocab(" FTS5_VOCAB_COL_SCHEMA ")", - "CREATE TABlE vocab(" FTS5_VOCAB_ROW_SCHEMA ")" + "CREATE TABlE vocab(" FTS5_VOCAB_ROW_SCHEMA ")", + "CREATE TABlE vocab(" FTS5_VOCAB_INST_SCHEMA ")" }; Fts5VocabTable *pRet = 0; @@ -203709,6 +219703,15 @@ /* ** Implementation of the xBestIndex method. +** +** Only constraints of the form: +** +** term <= ? +** term == ? +** term >= ? +** +** are interpreted. Less-than and less-than-or-equal are treated +** identically, as are greater-than and greater-than-or-equal. */ static int fts5VocabBestIndexMethod( sqlite3_vtab *pUnused, @@ -203852,7 +219855,57 @@ return SQLITE_OK; } +static int fts5VocabInstanceNewTerm(Fts5VocabCursor *pCsr){ + int rc = SQLITE_OK; + + if( sqlite3Fts5IterEof(pCsr->pIter) ){ + pCsr->bEof = 1; + }else{ + const char *zTerm; + int nTerm; + zTerm = sqlite3Fts5IterTerm(pCsr->pIter, &nTerm); + if( pCsr->nLeTerm>=0 ){ + int nCmp = MIN(nTerm, pCsr->nLeTerm); + int bCmp = memcmp(pCsr->zLeTerm, zTerm, nCmp); + if( bCmp<0 || (bCmp==0 && pCsr->nLeTermbEof = 1; + } + } + sqlite3Fts5BufferSet(&rc, &pCsr->term, nTerm, (const u8*)zTerm); + } + return rc; +} + +static int fts5VocabInstanceNext(Fts5VocabCursor *pCsr){ + int eDetail = pCsr->pConfig->eDetail; + int rc = SQLITE_OK; + Fts5IndexIter *pIter = pCsr->pIter; + i64 *pp = &pCsr->iInstPos; + int *po = &pCsr->iInstOff; + + assert( sqlite3Fts5IterEof(pIter)==0 ); + assert( pCsr->bEof==0 ); + while( eDetail==FTS5_DETAIL_NONE + || sqlite3Fts5PoslistNext64(pIter->pData, pIter->nData, po, pp) + ){ + pCsr->iInstPos = 0; + pCsr->iInstOff = 0; + + rc = sqlite3Fts5IterNextScan(pCsr->pIter); + if( rc==SQLITE_OK ){ + rc = fts5VocabInstanceNewTerm(pCsr); + if( pCsr->bEof || eDetail==FTS5_DETAIL_NONE ) break; + } + if( rc ){ + pCsr->bEof = 1; + break; + } + } + + return rc; +} + /* ** Advance the cursor to the next row in the table. */ @@ -203864,6 +219917,10 @@ pCsr->rowid++; + if( pTab->eType==FTS5_VOCAB_INSTANCE ){ + return fts5VocabInstanceNext(pCsr); + } + if( pTab->eType==FTS5_VOCAB_COL ){ for(pCsr->iCol++; pCsr->iColiCol++){ if( pCsr->aDoc[pCsr->iCol] ) break; @@ -203870,7 +219927,7 @@ } } - if( pTab->eType==FTS5_VOCAB_ROW || pCsr->iCol>=nCol ){ + if( pTab->eType!=FTS5_VOCAB_COL || pCsr->iCol>=nCol ){ if( sqlite3Fts5IterEof(pCsr->pIter) ){ pCsr->bEof = 1; }else{ @@ -203894,6 +219951,7 @@ assert( pTab->eType==FTS5_VOCAB_COL || pTab->eType==FTS5_VOCAB_ROW ); while( rc==SQLITE_OK ){ + int eDetail = pCsr->pConfig->eDetail; const u8 *pPos; int nPos; /* Position list */ i64 iPos = 0; /* 64-bit position read from poslist */ int iOff = 0; /* Current offset within position list */ @@ -203900,16 +219958,19 @@ pPos = pCsr->pIter->pData; nPos = pCsr->pIter->nData; - switch( pCsr->pConfig->eDetail ){ - case FTS5_DETAIL_FULL: - pPos = pCsr->pIter->pData; - nPos = pCsr->pIter->nData; - if( pTab->eType==FTS5_VOCAB_ROW ){ + + switch( pTab->eType ){ + case FTS5_VOCAB_ROW: + if( eDetail==FTS5_DETAIL_FULL ){ while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){ pCsr->aCnt[0]++; } - pCsr->aDoc[0]++; - }else{ + } + pCsr->aDoc[0]++; + break; + + case FTS5_VOCAB_COL: + if( eDetail==FTS5_DETAIL_FULL ){ int iCol = -1; while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){ int ii = FTS5_POS2COLUMN(iPos); @@ -203923,13 +219984,7 @@ iCol = ii; } } - } - break; - - case FTS5_DETAIL_COLUMNS: - if( pTab->eType==FTS5_VOCAB_ROW ){ - pCsr->aDoc[0]++; - }else{ + }else if( eDetail==FTS5_DETAIL_COLUMNS ){ while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff,&iPos) ){ assert_nc( iPos>=0 && iPos=nCol ){ @@ -203938,12 +219993,14 @@ } pCsr->aDoc[iPos]++; } + }else{ + assert( eDetail==FTS5_DETAIL_NONE ); + pCsr->aDoc[0]++; } break; - default: - assert( pCsr->pConfig->eDetail==FTS5_DETAIL_NONE ); - pCsr->aDoc[0]++; + default: + assert( pTab->eType==FTS5_VOCAB_INSTANCE ); break; } @@ -203950,6 +220007,7 @@ if( rc==SQLITE_OK ){ rc = sqlite3Fts5IterNextScan(pCsr->pIter); } + if( pTab->eType==FTS5_VOCAB_INSTANCE ) break; if( rc==SQLITE_OK ){ zTerm = sqlite3Fts5IterTerm(pCsr->pIter, &nTerm); @@ -203979,7 +220037,9 @@ int nUnused, /* Number of elements in apVal */ sqlite3_value **apVal /* Arguments for the indexing scheme */ ){ + Fts5VocabTable *pTab = (Fts5VocabTable*)pCursor->pVtab; Fts5VocabCursor *pCsr = (Fts5VocabCursor*)pCursor; + int eType = pTab->eType; int rc = SQLITE_OK; int iVal = 0; @@ -204019,11 +220079,16 @@ } } - if( rc==SQLITE_OK ){ rc = sqlite3Fts5IndexQuery(pCsr->pIndex, zTerm, nTerm, f, 0, &pCsr->pIter); } - if( rc==SQLITE_OK ){ + if( rc==SQLITE_OK && eType==FTS5_VOCAB_INSTANCE ){ + rc = fts5VocabInstanceNewTerm(pCsr); + } + if( rc==SQLITE_OK + && !pCsr->bEof + && (eType!=FTS5_VOCAB_INSTANCE || pCsr->pConfig->eDetail!=FTS5_DETAIL_NONE) + ){ rc = fts5VocabNextMethod(pCursor); } @@ -204065,7 +220130,7 @@ }else{ iVal = pCsr->aCnt[pCsr->iCol]; } - }else{ + }else if( eType==FTS5_VOCAB_ROW ){ assert( iCol==1 || iCol==2 ); if( iCol==1 ){ iVal = pCsr->aDoc[0]; @@ -204072,6 +220137,34 @@ }else{ iVal = pCsr->aCnt[0]; } + }else{ + assert( eType==FTS5_VOCAB_INSTANCE ); + switch( iCol ){ + case 1: + sqlite3_result_int64(pCtx, pCsr->pIter->iRowid); + break; + case 2: { + int ii = -1; + if( eDetail==FTS5_DETAIL_FULL ){ + ii = FTS5_POS2COLUMN(pCsr->iInstPos); + }else if( eDetail==FTS5_DETAIL_COLUMNS ){ + ii = (int)pCsr->iInstPos; + } + if( ii>=0 && iipConfig->nCol ){ + const char *z = pCsr->pConfig->azCol[ii]; + sqlite3_result_text(pCtx, z, -1, SQLITE_STATIC); + } + break; + } + default: { + assert( iCol==3 ); + if( eDetail==FTS5_DETAIL_FULL ){ + int ii = FTS5_POS2OFFSET(pCsr->iInstPos); + sqlite3_result_int(pCtx, ii); + } + break; + } + } } if( iVal>0 ) sqlite3_result_int64(pCtx, iVal); @@ -204117,6 +220210,7 @@ /* xSavepoint */ 0, /* xRelease */ 0, /* xRollbackTo */ 0, + /* xShadowName */ 0 }; void *p = (void*)pGlobal; @@ -204124,8 +220218,6 @@ } - - #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS5) */ @@ -204399,6 +220491,7 @@ 0, /* xSavepoint */ 0, /* xRelease */ 0, /* xRollbackTo */ + 0, /* xShadowName */ }; #endif /* SQLITE_OMIT_VIRTUALTABLE */ @@ -204431,3 +220524,10 @@ #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */ /************** End of stmt.c ************************************************/ +#if __LINE__!=220527 +#undef SQLITE_SOURCE_ID +#define SQLITE_SOURCE_ID "2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238alt2" +#endif +/* Return the source-id for this library */ +SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } +/************************** End of sqlite3.c ******************************/ --- contrib/sqlite3/sqlite3.h.orig +++ contrib/sqlite3/sqlite3.h @@ -115,15 +115,17 @@ ** a string which identifies a particular check-in of SQLite ** within its configuration management system. ^The SQLITE_SOURCE_ID ** string contains the date and time of the check-in (UTC) and a SHA1 -** or SHA3-256 hash of the entire source tree. +** or SHA3-256 hash of the entire source tree. If the source code has +** been edited in any way since it was last checked in, then the last +** four hexadecimal digits of the hash may be modified. ** ** See also: [sqlite3_libversion()], ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.20.0" -#define SQLITE_VERSION_NUMBER 3020000 -#define SQLITE_SOURCE_ID "2017-08-01 13:24:15 9501e22dfeebdcefa783575e47c60b514d7c2e0cad73b2a496c0bc4b680900a8" +#define SQLITE_VERSION "3.26.0" +#define SQLITE_VERSION_NUMBER 3026000 +#define SQLITE_SOURCE_ID "2018-12-01 12:34:55 bf8c1b2b7a5960c282e543b9c293686dccff272512d08865f4600fb58238b4f9" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -139,7 +141,7 @@ ** ** 
       ** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
-** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
+** assert( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,80)==0 );
 ** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
 **
      )^ ** @@ -149,9 +151,11 @@ ** function is provided for use in DLLs since DLL users usually do not have ** direct access to string constants within the DLL. ^The ** sqlite3_libversion_number() function returns an integer equal to -** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns +** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns ** a pointer to a string constant whose value is the same as the -** [SQLITE_SOURCE_ID] C preprocessor macro. +** [SQLITE_SOURCE_ID] C preprocessor macro. Except if SQLite is built +** using an edited copy of [the amalgamation], then the last four characters +** of the hash might be different from [SQLITE_SOURCE_ID].)^ ** ** See also: [sqlite_version()] and [sqlite_source_id()]. */ @@ -432,7 +436,7 @@ #define SQLITE_FULL 13 /* Insertion failed because database is full */ #define SQLITE_CANTOPEN 14 /* Unable to open the database file */ #define SQLITE_PROTOCOL 15 /* Database lock protocol error */ -#define SQLITE_EMPTY 16 /* Not used */ +#define SQLITE_EMPTY 16 /* Internal use only */ #define SQLITE_SCHEMA 17 /* The database schema changed */ #define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */ #define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */ @@ -466,6 +470,9 @@ ** the most recent error can be obtained using ** [sqlite3_extended_errcode()]. */ +#define SQLITE_ERROR_MISSING_COLLSEQ (SQLITE_ERROR | (1<<8)) +#define SQLITE_ERROR_RETRY (SQLITE_ERROR | (2<<8)) +#define SQLITE_ERROR_SNAPSHOT (SQLITE_ERROR | (3<<8)) #define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) #define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) #define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8)) @@ -494,7 +501,11 @@ #define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8)) #define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8)) #define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8)) +#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8)) +#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8)) +#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8)) #define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8)) +#define SQLITE_LOCKED_VTAB (SQLITE_LOCKED | (2<<8)) #define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8)) #define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8)) #define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8)) @@ -501,11 +512,15 @@ #define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8)) #define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8)) #define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8)) +#define SQLITE_CANTOPEN_DIRTYWAL (SQLITE_CANTOPEN | (5<<8)) /* Not Used */ #define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8)) +#define SQLITE_CORRUPT_SEQUENCE (SQLITE_CORRUPT | (2<<8)) #define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8)) #define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8)) #define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8)) #define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8)) +#define SQLITE_READONLY_CANTINIT (SQLITE_READONLY | (5<<8)) +#define SQLITE_READONLY_DIRECTORY (SQLITE_READONLY | (6<<8)) #define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8)) #define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8)) #define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8)) @@ -580,6 +595,11 @@ ** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on ** read-only media and cannot be changed even by processes with ** elevated privileges. +** +** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying +** filesystem supports doing multiple write operations atomically when those +** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and +** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. */ #define SQLITE_IOCAP_ATOMIC 0x00000001 #define SQLITE_IOCAP_ATOMIC512 0x00000002 @@ -595,6 +615,7 @@ #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800 #define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000 #define SQLITE_IOCAP_IMMUTABLE 0x00002000 +#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000 /* ** CAPI3REF: File Locking Levels @@ -729,6 +750,7 @@ **
    • [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN] **
    • [SQLITE_IOCAP_POWERSAFE_OVERWRITE] **
    • [SQLITE_IOCAP_IMMUTABLE] +**
    • [SQLITE_IOCAP_BATCH_ATOMIC] **
    ** ** The SQLITE_IOCAP_ATOMIC property means that all writes of @@ -866,7 +888,8 @@ **
  • [[SQLITE_FCNTL_PERSIST_WAL]] ** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the ** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary -** write ahead log and shared memory files used for transaction control +** write ahead log ([WAL file]) and shared memory +** files used for transaction control ** are automatically deleted when the latest connection to the database ** closes. Setting persistent WAL mode causes those files to persist after ** close. Persisting the files is useful when other processes that do not @@ -1012,6 +1035,66 @@ ** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by ** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for ** this opcode. +** +**
  • [[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]] +** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then +** the file descriptor is placed in "batch write mode", which +** means all subsequent write operations will be deferred and done +** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems +** that do not support batch atomic writes will return SQLITE_NOTFOUND. +** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to +** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or +** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make +** no VFS interface calls on the same [sqlite3_file] file descriptor +** except for calls to the xWrite method and the xFileControl method +** with [SQLITE_FCNTL_SIZE_HINT]. +** +**
  • [[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]] +** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write +** operations since the previous successful call to +** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically. +** This file control returns [SQLITE_OK] if and only if the writes were +** all performed successfully and have been committed to persistent storage. +** ^Regardless of whether or not it is successful, this file control takes +** the file descriptor out of batch write mode so that all subsequent +** write operations are independent. +** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without +** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. +** +**
  • [[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]] +** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write +** operations since the previous successful call to +** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back. +** ^This file control takes the file descriptor out of batch write mode +** so that all subsequent write operations are independent. +** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without +** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. +** +**
  • [[SQLITE_FCNTL_LOCK_TIMEOUT]] +** The [SQLITE_FCNTL_LOCK_TIMEOUT] opcode causes attempts to obtain +** a file lock using the xLock or xShmLock methods of the VFS to wait +** for up to M milliseconds before failing, where M is the single +** unsigned integer parameter. +** +**
  • [[SQLITE_FCNTL_DATA_VERSION]] +** The [SQLITE_FCNTL_DATA_VERSION] opcode is used to detect changes to +** a database file. The argument is a pointer to a 32-bit unsigned integer. +** The "data version" for the pager is written into the pointer. The +** "data version" changes whenever any change occurs to the corresponding +** database file, either through SQL statements on the same database +** connection or through transactions committed by separate database +** connections possibly in other processes. The [sqlite3_total_changes()] +** interface can be used to find if any database on the connection has changed, +** but that interface responds to changes on TEMP as well as MAIN and does +** not provide a mechanism to detect changes to MAIN only. Also, the +** [sqlite3_total_changes()] interface responds to internal changes only and +** omits changes made by other database connections. The +** [PRAGMA data_version] command provide a mechanism to detect changes to +** a single attached database that occur due to other database connections, +** but omits changes implemented by the database connection on which it is +** called. This file control is the only mechanism to detect changes that +** happen either internally or externally and that are associated with +** a particular attached database. ** */ #define SQLITE_FCNTL_LOCKSTATE 1 @@ -1043,6 +1126,11 @@ #define SQLITE_FCNTL_JOURNAL_POINTER 28 #define SQLITE_FCNTL_WIN32_GET_HANDLE 29 #define SQLITE_FCNTL_PDB 30 +#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31 +#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32 +#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33 +#define SQLITE_FCNTL_LOCK_TIMEOUT 34 +#define SQLITE_FCNTL_DATA_VERSION 35 /* deprecated names */ #define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE @@ -1080,12 +1168,18 @@ ** in the name of the object stands for "virtual file system". See ** the [VFS | VFS documentation] for further information. ** -** The value of the iVersion field is initially 1 but may be larger in -** future versions of SQLite. Additional fields may be appended to this -** object when the iVersion value is increased. Note that the structure -** of the sqlite3_vfs object changes in the transaction between -** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not -** modified. +** The VFS interface is sometimes extended by adding new methods onto +** the end. Each time such an extension occurs, the iVersion field +** is incremented. The iVersion value started out as 1 in +** SQLite [version 3.5.0] on [dateof:3.5.0], then increased to 2 +** with SQLite [version 3.7.0] on [dateof:3.7.0], and then increased +** to 3 with SQLite [version 3.7.6] on [dateof:3.7.6]. Additional fields +** may be appended to the sqlite3_vfs object and the iVersion value +** may increase again in future versions of SQLite. +** Note that the structure +** of the sqlite3_vfs object changes in the transition from +** SQLite [version 3.5.9] to [version 3.6.0] on [dateof:3.6.0] +** and yet the iVersion field was not modified. ** ** The szOsFile field is the size of the subclassed [sqlite3_file] ** structure used by this VFS. mxPathname is the maximum length of @@ -1613,6 +1707,16 @@ ** routines with a wrapper that simulations memory allocation failure or ** tracks memory usage, for example.
    • ** +** [[SQLITE_CONFIG_SMALL_MALLOC]]
    SQLITE_CONFIG_SMALL_MALLOC
    +**
    ^The SQLITE_CONFIG_SMALL_MALLOC option takes single argument of +** type int, interpreted as a boolean, which if true provides a hint to +** SQLite that it should avoid large memory allocations if possible. +** SQLite will run faster if it is free to make large memory allocations, +** but some application might prefer to run slower in exchange for +** guarantees about memory fragmentation that are possible if large +** allocations are avoided. This hint is normally off. +**
    +** ** [[SQLITE_CONFIG_MEMSTATUS]]
    SQLITE_CONFIG_MEMSTATUS
    **
    ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int, ** interpreted as a boolean, which enables or disables the collection of @@ -1630,25 +1734,7 @@ **
    ** ** [[SQLITE_CONFIG_SCRATCH]]
    SQLITE_CONFIG_SCRATCH
    -**
    ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer -** that SQLite can use for scratch memory. ^(There are three arguments -** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte -** aligned memory buffer from which the scratch allocations will be -** drawn, the size of each scratch allocation (sz), -** and the maximum number of scratch allocations (N).)^ -** The first argument must be a pointer to an 8-byte aligned buffer -** of at least sz*N bytes of memory. -** ^SQLite will not use more than one scratch buffers per thread. -** ^SQLite will never request a scratch buffer that is more than 6 -** times the database page size. -** ^If SQLite needs needs additional -** scratch memory beyond what is provided by this configuration option, then -** [sqlite3_malloc()] will be used to obtain the memory needed.

    -** ^When the application provides any amount of scratch memory using -** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large -** [sqlite3_malloc|heap allocations]. -** This can help [Robson proof|prevent memory allocation failures] due to heap -** fragmentation in low-memory embedded systems. +**

    The SQLITE_CONFIG_SCRATCH option is no longer used. **
    ** ** [[SQLITE_CONFIG_PAGECACHE]]
    SQLITE_CONFIG_PAGECACHE
    @@ -1684,8 +1770,7 @@ ** [[SQLITE_CONFIG_HEAP]]
    SQLITE_CONFIG_HEAP
    **
    ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer ** that SQLite will use for all of its dynamic memory allocation needs -** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and -** [SQLITE_CONFIG_PAGECACHE]. +** beyond those provided for by [SQLITE_CONFIG_PAGECACHE]. ** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled ** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns ** [SQLITE_ERROR] if invoked otherwise. @@ -1871,6 +1956,22 @@ ** I/O required to support statement rollback. ** The default value for this setting is controlled by the ** [SQLITE_STMTJRNL_SPILL] compile-time option. +** +** [[SQLITE_CONFIG_SORTERREF_SIZE]] +**
    SQLITE_CONFIG_SORTERREF_SIZE +**
    The SQLITE_CONFIG_SORTERREF_SIZE option accepts a single parameter +** of type (int) - the new value of the sorter-reference size threshold. +** Usually, when SQLite uses an external sort to order records according +** to an ORDER BY clause, all fields required by the caller are present in the +** sorted records. However, if SQLite determines based on the declared type +** of a table column that its values are likely to be very large - larger +** than the configured sorter-reference size threshold - then a reference +** is stored in each sorted record and the required column values loaded +** from the database as records are returned in sorted order. The default +** value for this option is to never use this optimization. Specifying a +** negative value for this option restores the default behaviour. +** This option is only available if SQLite is compiled with the +** [SQLITE_ENABLE_SORTER_REFERENCES] compile-time option. **
    */ #define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ @@ -1878,7 +1979,7 @@ #define SQLITE_CONFIG_SERIALIZED 3 /* nil */ #define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */ #define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */ +#define SQLITE_CONFIG_SCRATCH 6 /* No longer used */ #define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */ #define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */ #define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */ @@ -1899,6 +2000,8 @@ #define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */ #define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */ #define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */ +#define SQLITE_CONFIG_SMALL_MALLOC 27 /* boolean */ +#define SQLITE_CONFIG_SORTERREF_SIZE 28 /* int nByte */ /* ** CAPI3REF: Database Connection Configuration Options @@ -1914,6 +2017,7 @@ ** is invoked. ** **
    +** [[SQLITE_DBCONFIG_LOOKASIDE]] **
    SQLITE_DBCONFIG_LOOKASIDE
    **
    ^This option takes three additional arguments that determine the ** [lookaside memory allocator] configuration for the [database connection]. @@ -1936,6 +2040,7 @@ ** memory is in use leaves the configuration unchanged and returns ** [SQLITE_BUSY].)^
    ** +** [[SQLITE_DBCONFIG_ENABLE_FKEY]] **
    SQLITE_DBCONFIG_ENABLE_FKEY
    **
    ^This option is used to enable or disable the enforcement of ** [foreign key constraints]. There should be two additional arguments. @@ -1946,6 +2051,7 @@ ** following this call. The second parameter may be a NULL pointer, in ** which case the FK enforcement setting is not reported back.
    ** +** [[SQLITE_DBCONFIG_ENABLE_TRIGGER]] **
    SQLITE_DBCONFIG_ENABLE_TRIGGER
    **
    ^This option is used to enable or disable [CREATE TRIGGER | triggers]. ** There should be two additional arguments. @@ -1956,6 +2062,7 @@ ** following this call. The second parameter may be a NULL pointer, in ** which case the trigger setting is not reported back.
    ** +** [[SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER]] **
    SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER
    **
    ^This option is used to enable or disable the two-argument ** version of the [fts3_tokenizer()] function which is part of the @@ -1969,6 +2076,7 @@ ** following this call. The second parameter may be a NULL pointer, in ** which case the new setting is not reported back.
    ** +** [[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION]] **
    SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION
    **
    ^This option is used to enable or disable the [sqlite3_load_extension()] ** interface independently of the [load_extension()] SQL function. @@ -1986,7 +2094,7 @@ ** be a NULL pointer, in which case the new setting is not reported back. **
    ** -**
    SQLITE_DBCONFIG_MAINDBNAME
    +** [[SQLITE_DBCONFIG_MAINDBNAME]]
    SQLITE_DBCONFIG_MAINDBNAME
    **
    ^This option is used to change the name of the "main" database ** schema. ^The sole argument is a pointer to a constant UTF8 string ** which will become the new schema name in place of "main". ^SQLite @@ -1995,6 +2103,7 @@ ** until after the database connection closes. **
    ** +** [[SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE]] **
    SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE
    **
    Usually, when a database in wal mode is closed or detached from a ** database handle, SQLite checks if this will mean that there are now no @@ -2001,13 +2110,14 @@ ** connections at all to the database. If so, it performs a checkpoint ** operation before closing the connection. This option may be used to ** override this behaviour. The first parameter passed to this operation -** is an integer - non-zero to disable checkpoints-on-close, or zero (the -** default) to enable them. The second parameter is a pointer to an integer +** is an integer - positive to disable checkpoints-on-close, or zero (the +** default) to enable them, and negative to leave the setting unchanged. +** The second parameter is a pointer to an integer ** into which is written 0 or 1 to indicate whether checkpoints-on-close ** have been disabled - 0 if they are not disabled, 1 if they are. **
    ** -**
    SQLITE_DBCONFIG_ENABLE_QPSG
    +** [[SQLITE_DBCONFIG_ENABLE_QPSG]]
    SQLITE_DBCONFIG_ENABLE_QPSG
    **
    ^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates ** the [query planner stability guarantee] (QPSG). When the QPSG is active, ** a single SQL query statement will always use the same algorithm regardless @@ -2016,8 +2126,57 @@ ** slower. But the QPSG has the advantage of more predictable behavior. With ** the QPSG active, SQLite will always use the same query plan in the field as ** was used during testing in the lab. +** The first argument to this setting is an integer which is 0 to disable +** the QPSG, positive to enable QPSG, or negative to leave the setting +** unchanged. The second parameter is a pointer to an integer into which +** is written 0 or 1 to indicate whether the QPSG is disabled or enabled +** following this call. **
    ** +** [[SQLITE_DBCONFIG_TRIGGER_EQP]]
    SQLITE_DBCONFIG_TRIGGER_EQP
    +**
    By default, the output of EXPLAIN QUERY PLAN commands does not +** include output for any operations performed by trigger programs. This +** option is used to set or clear (the default) a flag that governs this +** behavior. The first parameter passed to this operation is an integer - +** positive to enable output for trigger programs, or zero to disable it, +** or negative to leave the setting unchanged. +** The second parameter is a pointer to an integer into which is written +** 0 or 1 to indicate whether output-for-triggers has been disabled - 0 if +** it is not disabled, 1 if it is. +**
    +** +** [[SQLITE_DBCONFIG_RESET_DATABASE]]
    SQLITE_DBCONFIG_RESET_DATABASE
    +**
    Set the SQLITE_DBCONFIG_RESET_DATABASE flag and then run +** [VACUUM] in order to reset a database back to an empty database +** with no schema and no content. The following process works even for +** a badly corrupted database file: +**
      +**
    1. If the database connection is newly opened, make sure it has read the +** database schema by preparing then discarding some query against the +** database, or calling sqlite3_table_column_metadata(), ignoring any +** errors. This step is only necessary if the application desires to keep +** the database in WAL mode after the reset if it was in WAL mode before +** the reset. +**
    2. sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 1, 0); +**
    3. [sqlite3_exec](db, "[VACUUM]", 0, 0, 0); +**
    4. sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0); +**
    +** Because resetting a database is destructive and irreversible, the +** process requires the use of this obscure API and multiple steps to help +** ensure that it does not happen by accident. +** +** [[SQLITE_DBCONFIG_DEFENSIVE]]
    SQLITE_DBCONFIG_DEFENSIVE
    +**
    The SQLITE_DBCONFIG_DEFENSIVE option activates or deactivates the +** "defensive" flag for a database connection. When the defensive +** flag is enabled, language features that allow ordinary SQL to +** deliberately corrupt the database file are disabled. The disabled +** features include but are not limited to the following: +**
      +**
    • The [PRAGMA writable_schema=ON] statement. +**
    • Writes to the [sqlite_dbpage] virtual table. +**
    • Direct writes to [shadow tables]. +**
    +**
    **
    */ #define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */ @@ -2028,8 +2187,11 @@ #define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */ #define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE 1006 /* int int* */ #define SQLITE_DBCONFIG_ENABLE_QPSG 1007 /* int int* */ +#define SQLITE_DBCONFIG_TRIGGER_EQP 1008 /* int int* */ +#define SQLITE_DBCONFIG_RESET_DATABASE 1009 /* int int* */ +#define SQLITE_DBCONFIG_DEFENSIVE 1010 /* int int* */ +#define SQLITE_DBCONFIG_MAX 1010 /* Largest DBCONFIG */ - /* ** CAPI3REF: Enable Or Disable Extended Result Codes ** METHOD: sqlite3 @@ -2156,12 +2318,17 @@ ** program, the value returned reflects the number of rows modified by the ** previous INSERT, UPDATE or DELETE statement within the same trigger. ** -** See also the [sqlite3_total_changes()] interface, the -** [count_changes pragma], and the [changes() SQL function]. -** ** If a separate thread makes changes on the same database connection ** while [sqlite3_changes()] is running then the value returned ** is unpredictable and not meaningful. +** +** See also: +**
      +**
    • the [sqlite3_total_changes()] interface +**
    • the [count_changes pragma] +**
    • the [changes() SQL function] +**
    • the [data_version pragma] +**
    */ SQLITE_API int sqlite3_changes(sqlite3*); @@ -2179,13 +2346,26 @@ ** count, but those made as part of REPLACE constraint resolution are ** not. ^Changes to a view that are intercepted by INSTEAD OF triggers ** are not counted. +** +** This the [sqlite3_total_changes(D)] interface only reports the number +** of rows that changed due to SQL statement run against database +** connection D. Any changes by other database connections are ignored. +** To detect changes against a database file from other database +** connections use the [PRAGMA data_version] command or the +** [SQLITE_FCNTL_DATA_VERSION] [file control]. ** -** See also the [sqlite3_changes()] interface, the -** [count_changes pragma], and the [total_changes() SQL function]. -** ** If a separate thread makes changes on the same database connection ** while [sqlite3_total_changes()] is running then the value ** returned is unpredictable and not meaningful. +** +** See also: +**
      +**
    • the [sqlite3_changes()] interface +**
    • the [count_changes pragma] +**
    • the [changes() SQL function] +**
    • the [data_version pragma] +**
    • the [SQLITE_FCNTL_DATA_VERSION] [file control] +**
    */ SQLITE_API int sqlite3_total_changes(sqlite3*); @@ -2434,16 +2614,16 @@ ** ** These routines are work-alikes of the "printf()" family of functions ** from the standard C library. -** These routines understand most of the common K&R formatting options, -** plus some additional non-standard formats, detailed below. -** Note that some of the more obscure formatting options from recent -** C-library standards are omitted from this implementation. +** These routines understand most of the common formatting options from +** the standard library printf() +** plus some additional non-standard formats ([%q], [%Q], [%w], and [%z]). +** See the [built-in printf()] documentation for details. ** ** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their -** results into memory obtained from [sqlite3_malloc()]. +** results into memory obtained from [sqlite3_malloc64()]. ** The strings returned by these two routines should be ** released by [sqlite3_free()]. ^Both routines return a -** NULL pointer if [sqlite3_malloc()] is unable to allocate enough +** NULL pointer if [sqlite3_malloc64()] is unable to allocate enough ** memory to hold the resulting string. ** ** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from @@ -2467,71 +2647,7 @@ ** ** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf(). ** -** These routines all implement some additional formatting -** options that are useful for constructing SQL statements. -** All of the usual printf() formatting options apply. In addition, there -** is are "%q", "%Q", "%w" and "%z" options. -** -** ^(The %q option works like %s in that it substitutes a nul-terminated -** string from the argument list. But %q also doubles every '\'' character. -** %q is designed for use inside a string literal.)^ By doubling each '\'' -** character it escapes that character and allows it to be inserted into -** the string. -** -** For example, assume the string variable zText contains text as follows: -** -** 
    -**  char *zText = "It's a happy day!";
-**
    -** -** One can use this text in an SQL statement as follows: -** -** 
    -**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
    -** -** Because the %q format string is used, the '\'' character in zText -** is escaped and the SQL generated is as follows: -** -** 
    -**  INSERT INTO table1 VALUES('It''s a happy day!')
-**
    -** -** This is correct. Had we used %s instead of %q, the generated SQL -** would have looked like this: -** -** 
    -**  INSERT INTO table1 VALUES('It's a happy day!');
-**
    -** -** This second example is an SQL syntax error. As a general rule you should -** always use %q instead of %s when inserting text into a string literal. -** -** ^(The %Q option works like %q except it also adds single quotes around -** the outside of the total string. Additionally, if the parameter in the -** argument list is a NULL pointer, %Q substitutes the text "NULL" (without -** single quotes).)^ So, for example, one could say: -** -** 
    -**  char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-**  sqlite3_exec(db, zSQL, 0, 0, 0);
-**  sqlite3_free(zSQL);
-**
    -** -** The code above will render a correct SQL statement in the zSQL -** variable even if the zText variable is a NULL pointer. -** -** ^(The "%w" formatting option is like "%q" except that it expects to -** be contained within double-quotes instead of single quotes, and it -** escapes the double-quote character instead of the single-quote -** character.)^ The "%w" formatting option is intended for safely inserting -** table and column names into a constructed SQL statement. -** -** ^(The "%z" formatting option works like "%s" but with the -** addition that after the string has been read and copied into -** the result, [sqlite3_free()] is called on the input string.)^ +** See also: [built-in printf()], [printf() SQL function] */ SQLITE_API char *sqlite3_mprintf(const char*,...); SQLITE_API char *sqlite3_vmprintf(const char*, va_list); @@ -2889,8 +3005,8 @@ ** KEYWORDS: SQLITE_TRACE ** ** These constants identify classes of events that can be monitored -** using the [sqlite3_trace_v2()] tracing logic. The third argument -** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of +** using the [sqlite3_trace_v2()] tracing logic. The M argument +** to [sqlite3_trace_v2(D,M,X,P)] is an OR-ed combination of one or more of ** the following constants. ^The first argument to the trace callback ** is one of the following constants. ** @@ -3099,10 +3215,10 @@ ** ^If [URI filename] interpretation is enabled, and the filename argument ** begins with "file:", then the filename is interpreted as a URI. ^URI ** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is -** set in the fourth argument to sqlite3_open_v2(), or if it has +** set in the third argument to sqlite3_open_v2(), or if it has ** been enabled globally using the [SQLITE_CONFIG_URI] option with the ** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option. -** As of SQLite version 3.7.7, URI filename interpretation is turned off +** URI filename interpretation is turned off ** by default, but future releases of SQLite might enable URI filename ** interpretation by default. See "[URI filenames]" for additional ** information. @@ -3305,13 +3421,24 @@ ** [database connection] D failed, then the sqlite3_errcode(D) interface ** returns the numeric [result code] or [extended result code] for that ** API call. -** If the most recent API call was successful, -** then the return value from sqlite3_errcode() is undefined. ** ^The sqlite3_extended_errcode() ** interface is the same except that it always returns the ** [extended result code] even when extended result codes are ** disabled. ** +** The values returned by sqlite3_errcode() and/or +** sqlite3_extended_errcode() might change with each API call. +** Except, there are some interfaces that are guaranteed to never +** change the value of the error code. The error-code preserving +** interfaces are: +** +**
      +**
    • sqlite3_errcode() +**
    • sqlite3_extended_errcode() +**
    • sqlite3_errmsg() +**
    • sqlite3_errmsg16() +**
    +** ** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language ** text that describes the error, as either UTF-8 or UTF-16 respectively. ** ^(Memory to hold the error message string is managed internally. @@ -3501,9 +3628,19 @@ ** on this hint by avoiding the use of [lookaside memory] so as not to ** deplete the limited store of lookaside memory. Future versions of ** SQLite may act on this hint differently. +** +** [[SQLITE_PREPARE_NORMALIZE]] ^(
    SQLITE_PREPARE_NORMALIZE
    +**
    The SQLITE_PREPARE_NORMALIZE flag indicates that a normalized +** representation of the SQL statement should be calculated and then +** associated with the prepared statement, which can be obtained via +** the [sqlite3_normalized_sql()] interface.)^ The semantics used to +** normalize a SQL statement are unspecified and subject to change. +** At a minimum, literal values will be replaced with suitable +** placeholders. ** */ #define SQLITE_PREPARE_PERSISTENT 0x01 +#define SQLITE_PREPARE_NORMALIZE 0x02 /* ** CAPI3REF: Compiling An SQL Statement @@ -3597,6 +3734,7 @@ ** or [GLOB] operator or if the parameter is compared to an indexed column ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. ** +** ** **

    ^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having ** the extra prepFlags parameter, which is a bit array consisting of zero or @@ -3603,7 +3741,6 @@ ** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags. ^The ** sqlite3_prepare_v2() interface works exactly the same as ** sqlite3_prepare_v3() with a zero prepFlags parameter. -** */ SQLITE_API int sqlite3_prepare( sqlite3 *db, /* Database handle */ @@ -3661,6 +3798,11 @@ ** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8 ** string containing the SQL text of prepared statement P with ** [bound parameters] expanded. +** ^The sqlite3_normalized_sql(P) interface returns a pointer to a UTF-8 +** string containing the normalized SQL text of prepared statement P. The +** semantics used to normalize a SQL statement are unspecified and subject +** to change. At a minimum, literal values will be replaced with suitable +** placeholders. ** ** ^(For example, if a prepared statement is created using the SQL ** text "SELECT $abc,:xyz" and if parameter $abc is bound to integer 2345 @@ -3676,8 +3818,9 @@ ** bound parameter expansions. ^The [SQLITE_OMIT_TRACE] compile-time ** option causes sqlite3_expanded_sql() to always return NULL. ** -** ^The string returned by sqlite3_sql(P) is managed by SQLite and is -** automatically freed when the prepared statement is finalized. +** ^The strings returned by sqlite3_sql(P) and sqlite3_normalized_sql(P) +** are managed by SQLite and are automatically freed when the prepared +** statement is finalized. ** ^The string returned by sqlite3_expanded_sql(P), on the other hand, ** is obtained from [sqlite3_malloc()] and must be free by the application ** by passing it to [sqlite3_free()]. @@ -3684,6 +3827,7 @@ */ SQLITE_API const char *sqlite3_sql(sqlite3_stmt *pStmt); SQLITE_API char *sqlite3_expanded_sql(sqlite3_stmt *pStmt); +SQLITE_API const char *sqlite3_normalized_sql(sqlite3_stmt *pStmt); /* ** CAPI3REF: Determine If An SQL Statement Writes The Database @@ -3776,8 +3920,9 @@ ** implementation of [application-defined SQL functions] are protected. ** ^The sqlite3_value object returned by ** [sqlite3_column_value()] is unprotected. -** Unprotected sqlite3_value objects may only be used with -** [sqlite3_result_value()] and [sqlite3_bind_value()]. +** Unprotected sqlite3_value objects may only be used as arguments +** to [sqlite3_result_value()], [sqlite3_bind_value()], and +** [sqlite3_value_dup()]. ** The [sqlite3_value_blob | sqlite3_value_type()] family of ** interfaces require protected sqlite3_value objects. */ @@ -4199,7 +4344,7 @@ ** other than [SQLITE_ROW] before any subsequent invocation of ** sqlite3_step(). Failure to reset the prepared statement using ** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from -** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1]), +** sqlite3_step(). But after [version 3.6.23.1] ([dateof:3.6.23.1], ** sqlite3_step() began ** calling [sqlite3_reset()] automatically in this circumstance rather ** than returning [SQLITE_MISUSE]. This is not considered a compatibility @@ -4464,11 +4609,25 @@ ** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into ** [sqlite3_free()]. ** -** ^(If a memory allocation error occurs during the evaluation of any -** of these routines, a default value is returned. The default value -** is either the integer 0, the floating point number 0.0, or a NULL -** pointer. Subsequent calls to [sqlite3_errcode()] will return -** [SQLITE_NOMEM].)^ +** As long as the input parameters are correct, these routines will only +** fail if an out-of-memory error occurs during a format conversion. +** Only the following subset of interfaces are subject to out-of-memory +** errors: +** +**

      +**
    • sqlite3_column_blob() +**
    • sqlite3_column_text() +**
    • sqlite3_column_text16() +**
    • sqlite3_column_bytes() +**
    • sqlite3_column_bytes16() +**
    +** +** If an out-of-memory error occurs, then the return value from these +** routines is the same as if the column had contained an SQL NULL value. +** Valid SQL NULL returns can be distinguished from out-of-memory errors +** by invoking the [sqlite3_errcode()] immediately after the suspect +** return value is obtained and before any +** other SQLite interface is called on the same [database connection]. */ SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol); SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol); @@ -4545,11 +4704,13 @@ ** ** ^These functions (collectively known as "function creation routines") ** are used to add SQL functions or aggregates or to redefine the behavior -** of existing SQL functions or aggregates. The only differences between -** these routines are the text encoding expected for -** the second parameter (the name of the function being created) -** and the presence or absence of a destructor callback for -** the application data pointer. +** of existing SQL functions or aggregates. The only differences between +** the three "sqlite3_create_function*" routines are the text encoding +** expected for the second parameter (the name of the function being +** created) and the presence or absence of a destructor callback for +** the application data pointer. Function sqlite3_create_window_function() +** is similar, but allows the user to supply the extra callback functions +** needed by [aggregate window functions]. ** ** ^The first parameter is the [database connection] to which the SQL ** function is to be added. ^If an application uses more than one database @@ -4595,7 +4756,8 @@ ** ^(The fifth parameter is an arbitrary pointer. The implementation of the ** function can gain access to this pointer using [sqlite3_user_data()].)^ ** -** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are +** ^The sixth, seventh and eighth parameters passed to the three +** "sqlite3_create_function*" functions, xFunc, xStep and xFinal, are ** pointers to C-language functions that implement the SQL function or ** aggregate. ^A scalar SQL function requires an implementation of the xFunc ** callback only; NULL pointers must be passed as the xStep and xFinal @@ -4604,16 +4766,25 @@ ** SQL function or aggregate, pass NULL pointers for all three function ** callbacks. ** -** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL, -** then it is destructor for the application data pointer. -** The destructor is invoked when the function is deleted, either by being -** overloaded or when the database connection closes.)^ -** ^The destructor is also invoked if the call to -** sqlite3_create_function_v2() fails. -** ^When the destructor callback of the tenth parameter is invoked, it -** is passed a single argument which is a copy of the application data -** pointer which was the fifth parameter to sqlite3_create_function_v2(). +** ^The sixth, seventh, eighth and ninth parameters (xStep, xFinal, xValue +** and xInverse) passed to sqlite3_create_window_function are pointers to +** C-language callbacks that implement the new function. xStep and xFinal +** must both be non-NULL. xValue and xInverse may either both be NULL, in +** which case a regular aggregate function is created, or must both be +** non-NULL, in which case the new function may be used as either an aggregate +** or aggregate window function. More details regarding the implementation +** of aggregate window functions are +** [user-defined window functions|available here]. ** +** ^(If the final parameter to sqlite3_create_function_v2() or +** sqlite3_create_window_function() is not NULL, then it is destructor for +** the application data pointer. The destructor is invoked when the function +** is deleted, either by being overloaded or when the database connection +** closes.)^ ^The destructor is also invoked if the call to +** sqlite3_create_function_v2() fails. ^When the destructor callback is +** invoked, it is passed a single argument which is a copy of the application +** data pointer which was the fifth parameter to sqlite3_create_function_v2(). +** ** ^It is permitted to register multiple implementations of the same ** functions with the same name but with either differing numbers of ** arguments or differing preferred text encodings. ^SQLite will use @@ -4665,6 +4836,18 @@ void (*xFinal)(sqlite3_context*), void(*xDestroy)(void*) ); +SQLITE_API int sqlite3_create_window_function( + sqlite3 *db, + const char *zFunctionName, + int nArg, + int eTextRep, + void *pApp, + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value**), + void(*xDestroy)(void*) +); /* ** CAPI3REF: Text Encodings @@ -4735,6 +4918,9 @@ ** datatype of the value ** sqlite3_value_numeric_type   ** →  Best numeric datatype of the value +** sqlite3_value_nochange   +** →  True if the column is unchanged in an UPDATE +** against a virtual table. ** ** ** Details: @@ -4783,6 +4969,19 @@ ** then the conversion is performed. Otherwise no conversion occurs. ** The [SQLITE_INTEGER | datatype] after conversion is returned.)^ ** +** ^Within the [xUpdate] method of a [virtual table], the +** sqlite3_value_nochange(X) interface returns true if and only if +** the column corresponding to X is unchanged by the UPDATE operation +** that the xUpdate method call was invoked to implement and if +** and the prior [xColumn] method call that was invoked to extracted +** the value for that column returned without setting a result (probably +** because it queried [sqlite3_vtab_nochange()] and found that the column +** was unchanging). ^Within an [xUpdate] method, any value for which +** sqlite3_value_nochange(X) is true will in all other respects appear +** to be a NULL value. If sqlite3_value_nochange(X) is invoked anywhere other +** than within an [xUpdate] method call for an UPDATE statement, then +** the return value is arbitrary and meaningless. +** ** Please pay particular attention to the fact that the pointer returned ** from [sqlite3_value_blob()], [sqlite3_value_text()], or ** [sqlite3_value_text16()] can be invalidated by a subsequent call to @@ -4791,6 +4990,28 @@ ** ** These routines must be called from the same thread as ** the SQL function that supplied the [sqlite3_value*] parameters. +** +** As long as the input parameter is correct, these routines can only +** fail if an out-of-memory error occurs during a format conversion. +** Only the following subset of interfaces are subject to out-of-memory +** errors: +** +**
      +**
    • sqlite3_value_blob() +**
    • sqlite3_value_text() +**
    • sqlite3_value_text16() +**
    • sqlite3_value_text16le() +**
    • sqlite3_value_text16be() +**
    • sqlite3_value_bytes() +**
    • sqlite3_value_bytes16() +**
    +** +** If an out-of-memory error occurs, then the return value from these +** routines is the same as if the column had contained an SQL NULL value. +** Valid SQL NULL returns can be distinguished from out-of-memory errors +** by invoking the [sqlite3_errcode()] immediately after the suspect +** return value is obtained and before any +** other SQLite interface is called on the same [database connection]. */ SQLITE_API const void *sqlite3_value_blob(sqlite3_value*); SQLITE_API double sqlite3_value_double(sqlite3_value*); @@ -4805,6 +5026,7 @@ SQLITE_API int sqlite3_value_bytes16(sqlite3_value*); SQLITE_API int sqlite3_value_type(sqlite3_value*); SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); +SQLITE_API int sqlite3_value_nochange(sqlite3_value*); /* ** CAPI3REF: Finding The Subtype Of SQL Values @@ -5461,6 +5683,41 @@ SQLITE_API SQLITE_EXTERN char *sqlite3_data_directory; /* +** CAPI3REF: Win32 Specific Interface +** +** These interfaces are available only on Windows. The +** [sqlite3_win32_set_directory] interface is used to set the value associated +** with the [sqlite3_temp_directory] or [sqlite3_data_directory] variable, to +** zValue, depending on the value of the type parameter. The zValue parameter +** should be NULL to cause the previous value to be freed via [sqlite3_free]; +** a non-NULL value will be copied into memory obtained from [sqlite3_malloc] +** prior to being used. The [sqlite3_win32_set_directory] interface returns +** [SQLITE_OK] to indicate success, [SQLITE_ERROR] if the type is unsupported, +** or [SQLITE_NOMEM] if memory could not be allocated. The value of the +** [sqlite3_data_directory] variable is intended to act as a replacement for +** the current directory on the sub-platforms of Win32 where that concept is +** not present, e.g. WinRT and UWP. The [sqlite3_win32_set_directory8] and +** [sqlite3_win32_set_directory16] interfaces behave exactly the same as the +** sqlite3_win32_set_directory interface except the string parameter must be +** UTF-8 or UTF-16, respectively. +*/ +SQLITE_API int sqlite3_win32_set_directory( + unsigned long type, /* Identifier for directory being set or reset */ + void *zValue /* New value for directory being set or reset */ +); +SQLITE_API int sqlite3_win32_set_directory8(unsigned long type, const char *zValue); +SQLITE_API int sqlite3_win32_set_directory16(unsigned long type, const void *zValue); + +/* +** CAPI3REF: Win32 Directory Types +** +** These macros are only available on Windows. They define the allowed values +** for the type argument to the [sqlite3_win32_set_directory] interface. +*/ +#define SQLITE_WIN32_DATA_DIRECTORY_TYPE 1 +#define SQLITE_WIN32_TEMP_DIRECTORY_TYPE 2 + +/* ** CAPI3REF: Test For Auto-Commit Mode ** KEYWORDS: {autocommit mode} ** METHOD: sqlite3 @@ -6060,6 +6317,9 @@ int (*xSavepoint)(sqlite3_vtab *pVTab, int); int (*xRelease)(sqlite3_vtab *pVTab, int); int (*xRollbackTo)(sqlite3_vtab *pVTab, int); + /* The methods above are in versions 1 and 2 of the sqlite_module object. + ** Those below are for version 3 and greater. */ + int (*xShadowName)(const char*); }; /* @@ -6192,6 +6452,10 @@ /* ** CAPI3REF: Virtual Table Scan Flags +** +** Virtual table implementations are allowed to set the +** [sqlite3_index_info].idxFlags field to some combination of +** these bits. */ #define SQLITE_INDEX_SCAN_UNIQUE 1 /* Scan visits at most 1 row */ @@ -6203,15 +6467,21 @@ ** an operator that is part of a constraint term in the wHERE clause of ** a query that uses a [virtual table]. */ -#define SQLITE_INDEX_CONSTRAINT_EQ 2 -#define SQLITE_INDEX_CONSTRAINT_GT 4 -#define SQLITE_INDEX_CONSTRAINT_LE 8 -#define SQLITE_INDEX_CONSTRAINT_LT 16 -#define SQLITE_INDEX_CONSTRAINT_GE 32 -#define SQLITE_INDEX_CONSTRAINT_MATCH 64 -#define SQLITE_INDEX_CONSTRAINT_LIKE 65 -#define SQLITE_INDEX_CONSTRAINT_GLOB 66 -#define SQLITE_INDEX_CONSTRAINT_REGEXP 67 +#define SQLITE_INDEX_CONSTRAINT_EQ 2 +#define SQLITE_INDEX_CONSTRAINT_GT 4 +#define SQLITE_INDEX_CONSTRAINT_LE 8 +#define SQLITE_INDEX_CONSTRAINT_LT 16 +#define SQLITE_INDEX_CONSTRAINT_GE 32 +#define SQLITE_INDEX_CONSTRAINT_MATCH 64 +#define SQLITE_INDEX_CONSTRAINT_LIKE 65 +#define SQLITE_INDEX_CONSTRAINT_GLOB 66 +#define SQLITE_INDEX_CONSTRAINT_REGEXP 67 +#define SQLITE_INDEX_CONSTRAINT_NE 68 +#define SQLITE_INDEX_CONSTRAINT_ISNOT 69 +#define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70 +#define SQLITE_INDEX_CONSTRAINT_ISNULL 71 +#define SQLITE_INDEX_CONSTRAINT_IS 72 +#define SQLITE_INDEX_CONSTRAINT_FUNCTION 150 /* ** CAPI3REF: Register A Virtual Table Implementation @@ -6888,6 +7158,7 @@ /* ** CAPI3REF: Low-Level Control Of Database Files ** METHOD: sqlite3 +** KEYWORDS: {file control} ** ** ^The [sqlite3_file_control()] interface makes a direct call to the ** xFileControl method for the [sqlite3_io_methods] object associated @@ -6902,11 +7173,18 @@ ** the xFileControl method. ^The return value of the xFileControl ** method becomes the return value of this routine. ** -** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes +** A few opcodes for [sqlite3_file_control()] are handled directly +** by the SQLite core and never invoke the +** sqlite3_io_methods.xFileControl method. +** ^The [SQLITE_FCNTL_FILE_POINTER] value for the op parameter causes ** a pointer to the underlying [sqlite3_file] object to be written into -** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER -** case is a short-circuit path which does not actually invoke the -** underlying sqlite3_io_methods.xFileControl method. +** the space pointed to by the 4th parameter. The +** [SQLITE_FCNTL_JOURNAL_POINTER] works similarly except that it returns +** the [sqlite3_file] object associated with the journal file instead of +** the main database. The [SQLITE_FCNTL_VFS_POINTER] opcode returns +** a pointer to the underlying [sqlite3_vfs] object for the file. +** The [SQLITE_FCNTL_DATA_VERSION] returns the data version counter +** from the pager. ** ** ^If the second parameter (zDbName) does not match the name of any ** open database file, then SQLITE_ERROR is returned. ^This error @@ -6916,7 +7194,7 @@ ** an incorrect zDbName and an SQLITE_ERROR return from the underlying ** xFileControl method. ** -** See also: [SQLITE_FCNTL_LOCKSTATE] +** See also: [file control opcodes] */ SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*); @@ -6962,8 +7240,9 @@ #define SQLITE_TESTCTRL_ALWAYS 13 #define SQLITE_TESTCTRL_RESERVE 14 #define SQLITE_TESTCTRL_OPTIMIZATIONS 15 -#define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 +#define SQLITE_TESTCTRL_ISKEYWORD 16 /* NOT USED */ +#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 /* NOT USED */ +#define SQLITE_TESTCTRL_INTERNAL_FUNCTIONS 17 #define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 #define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */ #define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD 19 @@ -6973,9 +7252,193 @@ #define SQLITE_TESTCTRL_ISINIT 23 #define SQLITE_TESTCTRL_SORTER_MMAP 24 #define SQLITE_TESTCTRL_IMPOSTER 25 -#define SQLITE_TESTCTRL_LAST 25 +#define SQLITE_TESTCTRL_PARSER_COVERAGE 26 +#define SQLITE_TESTCTRL_LAST 26 /* Largest TESTCTRL */ /* +** CAPI3REF: SQL Keyword Checking +** +** These routines provide access to the set of SQL language keywords +** recognized by SQLite. Applications can uses these routines to determine +** whether or not a specific identifier needs to be escaped (for example, +** by enclosing in double-quotes) so as not to confuse the parser. +** +** The sqlite3_keyword_count() interface returns the number of distinct +** keywords understood by SQLite. +** +** The sqlite3_keyword_name(N,Z,L) interface finds the N-th keyword and +** makes *Z point to that keyword expressed as UTF8 and writes the number +** of bytes in the keyword into *L. The string that *Z points to is not +** zero-terminated. The sqlite3_keyword_name(N,Z,L) routine returns +** SQLITE_OK if N is within bounds and SQLITE_ERROR if not. If either Z +** or L are NULL or invalid pointers then calls to +** sqlite3_keyword_name(N,Z,L) result in undefined behavior. +** +** The sqlite3_keyword_check(Z,L) interface checks to see whether or not +** the L-byte UTF8 identifier that Z points to is a keyword, returning non-zero +** if it is and zero if not. +** +** The parser used by SQLite is forgiving. It is often possible to use +** a keyword as an identifier as long as such use does not result in a +** parsing ambiguity. For example, the statement +** "CREATE TABLE BEGIN(REPLACE,PRAGMA,END);" is accepted by SQLite, and +** creates a new table named "BEGIN" with three columns named +** "REPLACE", "PRAGMA", and "END". Nevertheless, best practice is to avoid +** using keywords as identifiers. Common techniques used to avoid keyword +** name collisions include: +**
      +**
    • Put all identifier names inside double-quotes. This is the official +** SQL way to escape identifier names. +**
    • Put identifier names inside [...]. This is not standard SQL, +** but it is what SQL Server does and so lots of programmers use this +** technique. +**
    • Begin every identifier with the letter "Z" as no SQL keywords start +** with "Z". +**
    • Include a digit somewhere in every identifier name. +**
    +** +** Note that the number of keywords understood by SQLite can depend on +** compile-time options. For example, "VACUUM" is not a keyword if +** SQLite is compiled with the [-DSQLITE_OMIT_VACUUM] option. Also, +** new keywords may be added to future releases of SQLite. +*/ +SQLITE_API int sqlite3_keyword_count(void); +SQLITE_API int sqlite3_keyword_name(int,const char**,int*); +SQLITE_API int sqlite3_keyword_check(const char*,int); + +/* +** CAPI3REF: Dynamic String Object +** KEYWORDS: {dynamic string} +** +** An instance of the sqlite3_str object contains a dynamically-sized +** string under construction. +** +** The lifecycle of an sqlite3_str object is as follows: +**
      +**
    1. ^The sqlite3_str object is created using [sqlite3_str_new()]. +**
    2. ^Text is appended to the sqlite3_str object using various +** methods, such as [sqlite3_str_appendf()]. +**
    3. ^The sqlite3_str object is destroyed and the string it created +** is returned using the [sqlite3_str_finish()] interface. +**
    +*/ +typedef struct sqlite3_str sqlite3_str; + +/* +** CAPI3REF: Create A New Dynamic String Object +** CONSTRUCTOR: sqlite3_str +** +** ^The [sqlite3_str_new(D)] interface allocates and initializes +** a new [sqlite3_str] object. To avoid memory leaks, the object returned by +** [sqlite3_str_new()] must be freed by a subsequent call to +** [sqlite3_str_finish(X)]. +** +** ^The [sqlite3_str_new(D)] interface always returns a pointer to a +** valid [sqlite3_str] object, though in the event of an out-of-memory +** error the returned object might be a special singleton that will +** silently reject new text, always return SQLITE_NOMEM from +** [sqlite3_str_errcode()], always return 0 for +** [sqlite3_str_length()], and always return NULL from +** [sqlite3_str_finish(X)]. It is always safe to use the value +** returned by [sqlite3_str_new(D)] as the sqlite3_str parameter +** to any of the other [sqlite3_str] methods. +** +** The D parameter to [sqlite3_str_new(D)] may be NULL. If the +** D parameter in [sqlite3_str_new(D)] is not NULL, then the maximum +** length of the string contained in the [sqlite3_str] object will be +** the value set for [sqlite3_limit](D,[SQLITE_LIMIT_LENGTH]) instead +** of [SQLITE_MAX_LENGTH]. +*/ +SQLITE_API sqlite3_str *sqlite3_str_new(sqlite3*); + +/* +** CAPI3REF: Finalize A Dynamic String +** DESTRUCTOR: sqlite3_str +** +** ^The [sqlite3_str_finish(X)] interface destroys the sqlite3_str object X +** and returns a pointer to a memory buffer obtained from [sqlite3_malloc64()] +** that contains the constructed string. The calling application should +** pass the returned value to [sqlite3_free()] to avoid a memory leak. +** ^The [sqlite3_str_finish(X)] interface may return a NULL pointer if any +** errors were encountered during construction of the string. ^The +** [sqlite3_str_finish(X)] interface will also return a NULL pointer if the +** string in [sqlite3_str] object X is zero bytes long. +*/ +SQLITE_API char *sqlite3_str_finish(sqlite3_str*); + +/* +** CAPI3REF: Add Content To A Dynamic String +** METHOD: sqlite3_str +** +** These interfaces add content to an sqlite3_str object previously obtained +** from [sqlite3_str_new()]. +** +** ^The [sqlite3_str_appendf(X,F,...)] and +** [sqlite3_str_vappendf(X,F,V)] interfaces uses the [built-in printf] +** functionality of SQLite to append formatted text onto the end of +** [sqlite3_str] object X. +** +** ^The [sqlite3_str_append(X,S,N)] method appends exactly N bytes from string S +** onto the end of the [sqlite3_str] object X. N must be non-negative. +** S must contain at least N non-zero bytes of content. To append a +** zero-terminated string in its entirety, use the [sqlite3_str_appendall()] +** method instead. +** +** ^The [sqlite3_str_appendall(X,S)] method appends the complete content of +** zero-terminated string S onto the end of [sqlite3_str] object X. +** +** ^The [sqlite3_str_appendchar(X,N,C)] method appends N copies of the +** single-byte character C onto the end of [sqlite3_str] object X. +** ^This method can be used, for example, to add whitespace indentation. +** +** ^The [sqlite3_str_reset(X)] method resets the string under construction +** inside [sqlite3_str] object X back to zero bytes in length. +** +** These methods do not return a result code. ^If an error occurs, that fact +** is recorded in the [sqlite3_str] object and can be recovered by a +** subsequent call to [sqlite3_str_errcode(X)]. +*/ +SQLITE_API void sqlite3_str_appendf(sqlite3_str*, const char *zFormat, ...); +SQLITE_API void sqlite3_str_vappendf(sqlite3_str*, const char *zFormat, va_list); +SQLITE_API void sqlite3_str_append(sqlite3_str*, const char *zIn, int N); +SQLITE_API void sqlite3_str_appendall(sqlite3_str*, const char *zIn); +SQLITE_API void sqlite3_str_appendchar(sqlite3_str*, int N, char C); +SQLITE_API void sqlite3_str_reset(sqlite3_str*); + +/* +** CAPI3REF: Status Of A Dynamic String +** METHOD: sqlite3_str +** +** These interfaces return the current status of an [sqlite3_str] object. +** +** ^If any prior errors have occurred while constructing the dynamic string +** in sqlite3_str X, then the [sqlite3_str_errcode(X)] method will return +** an appropriate error code. ^The [sqlite3_str_errcode(X)] method returns +** [SQLITE_NOMEM] following any out-of-memory error, or +** [SQLITE_TOOBIG] if the size of the dynamic string exceeds +** [SQLITE_MAX_LENGTH], or [SQLITE_OK] if there have been no errors. +** +** ^The [sqlite3_str_length(X)] method returns the current length, in bytes, +** of the dynamic string under construction in [sqlite3_str] object X. +** ^The length returned by [sqlite3_str_length(X)] does not include the +** zero-termination byte. +** +** ^The [sqlite3_str_value(X)] method returns a pointer to the current +** content of the dynamic string under construction in X. The value +** returned by [sqlite3_str_value(X)] is managed by the sqlite3_str object X +** and might be freed or altered by any subsequent method on the same +** [sqlite3_str] object. Applications must not used the pointer returned +** [sqlite3_str_value(X)] after any subsequent method call on the same +** object. ^Applications may change the content of the string returned +** by [sqlite3_str_value(X)] as long as they do not write into any bytes +** outside the range of 0 to [sqlite3_str_length(X)] and do not read or +** write any byte after any subsequent sqlite3_str method call. +*/ +SQLITE_API int sqlite3_str_errcode(sqlite3_str*); +SQLITE_API int sqlite3_str_length(sqlite3_str*); +SQLITE_API char *sqlite3_str_value(sqlite3_str*); + +/* ** CAPI3REF: SQLite Runtime Status ** ** ^These interfaces are used to retrieve runtime status information @@ -7022,8 +7485,7 @@ **
    This parameter is the current amount of memory checked out ** using [sqlite3_malloc()], either directly or indirectly. The ** figure includes calls made to [sqlite3_malloc()] by the application -** and internal memory usage by the SQLite library. Scratch memory -** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache +** and internal memory usage by the SQLite library. Auxiliary page-cache ** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in ** this parameter. The amount returned is the sum of the allocation ** sizes as reported by the xSize method in [sqlite3_mem_methods].
    )^ @@ -7061,29 +7523,14 @@ ** *pHighwater parameter to [sqlite3_status()] is of interest. ** The value written into the *pCurrent parameter is undefined.)^ ** -** [[SQLITE_STATUS_SCRATCH_USED]] ^(
    SQLITE_STATUS_SCRATCH_USED
    -**
    This parameter returns the number of allocations used out of the -** [scratch memory allocator] configured using -** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not -** in bytes. Since a single thread may only have one scratch allocation -** outstanding at time, this parameter also reports the number of threads -** using scratch memory at the same time.
    )^ +** [[SQLITE_STATUS_SCRATCH_USED]]
    SQLITE_STATUS_SCRATCH_USED
    +**
    No longer used.
    ** ** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(
    SQLITE_STATUS_SCRATCH_OVERFLOW
    -**
    This parameter returns the number of bytes of scratch memory -** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH] -** buffer and where forced to overflow to [sqlite3_malloc()]. The values -** returned include overflows because the requested allocation was too -** larger (that is, because the requested allocation was larger than the -** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer -** slots were available. -**
    )^ +**
    No longer used.
    ** -** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(
    SQLITE_STATUS_SCRATCH_SIZE
    -**
    This parameter records the largest memory allocation request -** handed to [scratch memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.
    )^ +** [[SQLITE_STATUS_SCRATCH_SIZE]]
    SQLITE_STATUS_SCRATCH_SIZE
    +**
    No longer used.
    ** ** [[SQLITE_STATUS_PARSER_STACK]] ^(
    SQLITE_STATUS_PARSER_STACK
    **
    The *pHighwater parameter records the deepest parser stack. @@ -7096,12 +7543,12 @@ #define SQLITE_STATUS_MEMORY_USED 0 #define SQLITE_STATUS_PAGECACHE_USED 1 #define SQLITE_STATUS_PAGECACHE_OVERFLOW 2 -#define SQLITE_STATUS_SCRATCH_USED 3 -#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 +#define SQLITE_STATUS_SCRATCH_USED 3 /* NOT USED */ +#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 /* NOT USED */ #define SQLITE_STATUS_MALLOC_SIZE 5 #define SQLITE_STATUS_PARSER_STACK 6 #define SQLITE_STATUS_PAGECACHE_SIZE 7 -#define SQLITE_STATUS_SCRATCH_SIZE 8 +#define SQLITE_STATUS_SCRATCH_SIZE 8 /* NOT USED */ #define SQLITE_STATUS_MALLOC_COUNT 9 /* @@ -7224,6 +7671,15 @@ ** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0. **
    ** +** [[SQLITE_DBSTATUS_CACHE_SPILL]] ^(
    SQLITE_DBSTATUS_CACHE_SPILL
    +**
    This parameter returns the number of dirty cache entries that have +** been written to disk in the middle of a transaction due to the page +** cache overflowing. Transactions are more efficient if they are written +** to disk all at once. When pages spill mid-transaction, that introduces +** additional overhead. This parameter can be used help identify +** inefficiencies that can be resolve by increasing the cache size. +**
    +** ** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(
    SQLITE_DBSTATUS_DEFERRED_FKS
    **
    This parameter returns zero for the current value if and only if ** all foreign key constraints (deferred or immediate) have been @@ -7243,7 +7699,8 @@ #define SQLITE_DBSTATUS_CACHE_WRITE 9 #define SQLITE_DBSTATUS_DEFERRED_FKS 10 #define SQLITE_DBSTATUS_CACHE_USED_SHARED 11 -#define SQLITE_DBSTATUS_MAX 11 /* Largest defined DBSTATUS */ +#define SQLITE_DBSTATUS_CACHE_SPILL 12 +#define SQLITE_DBSTATUS_MAX 12 /* Largest defined DBSTATUS */ /* @@ -8198,6 +8655,7 @@ ** can use to customize and optimize their behavior. ** **
    +** [[SQLITE_VTAB_CONSTRAINT_SUPPORT]] **
    SQLITE_VTAB_CONSTRAINT_SUPPORT **
    Calls of the form ** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported, @@ -8244,6 +8702,40 @@ SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); /* +** CAPI3REF: Determine If Virtual Table Column Access Is For UPDATE +** +** If the sqlite3_vtab_nochange(X) routine is called within the [xColumn] +** method of a [virtual table], then it returns true if and only if the +** column is being fetched as part of an UPDATE operation during which the +** column value will not change. Applications might use this to substitute +** a return value that is less expensive to compute and that the corresponding +** [xUpdate] method understands as a "no-change" value. +** +** If the [xColumn] method calls sqlite3_vtab_nochange() and finds that +** the column is not changed by the UPDATE statement, then the xColumn +** method can optionally return without setting a result, without calling +** any of the [sqlite3_result_int|sqlite3_result_xxxxx() interfaces]. +** In that case, [sqlite3_value_nochange(X)] will return true for the +** same column in the [xUpdate] method. +*/ +SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*); + +/* +** CAPI3REF: Determine The Collation For a Virtual Table Constraint +** +** This function may only be called from within a call to the [xBestIndex] +** method of a [virtual table]. +** +** The first argument must be the sqlite3_index_info object that is the +** first parameter to the xBestIndex() method. The second argument must be +** an index into the aConstraint[] array belonging to the sqlite3_index_info +** structure passed to xBestIndex. This function returns a pointer to a buffer +** containing the name of the collation sequence for the corresponding +** constraint. +*/ +SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int); + +/* ** CAPI3REF: Conflict resolution modes ** KEYWORDS: {conflict resolution mode} ** @@ -8513,7 +9005,6 @@ /* ** CAPI3REF: Database Snapshot ** KEYWORDS: {snapshot} {sqlite3_snapshot} -** EXPERIMENTAL ** ** An instance of the snapshot object records the state of a [WAL mode] ** database for some specific point in history. @@ -8530,11 +9021,6 @@ ** version of the database file so that it is possible to later open a new read ** transaction that sees that historical version of the database rather than ** the most recent version. -** -** The constructor for this object is [sqlite3_snapshot_get()]. The -** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer -** to an historical snapshot (if possible). The destructor for -** sqlite3_snapshot objects is [sqlite3_snapshot_free()]. */ typedef struct sqlite3_snapshot { unsigned char hidden[48]; @@ -8542,7 +9028,7 @@ /* ** CAPI3REF: Record A Database Snapshot -** EXPERIMENTAL +** CONSTRUCTOR: sqlite3_snapshot ** ** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a ** new [sqlite3_snapshot] object that records the current state of @@ -8558,7 +9044,7 @@ ** in this case. ** **
      -**
    • The database handle must be in [autocommit mode]. +**
    • The database handle must not be in [autocommit mode]. ** **
    • Schema S of [database connection] D must be a [WAL mode] database. ** @@ -8581,7 +9067,7 @@ ** to avoid a memory leak. ** ** The [sqlite3_snapshot_get()] interface is only available when the -** SQLITE_ENABLE_SNAPSHOT compile-time option is used. +** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_get( sqlite3 *db, @@ -8591,24 +9077,35 @@ /* ** CAPI3REF: Start a read transaction on an historical snapshot -** EXPERIMENTAL +** METHOD: sqlite3_snapshot ** -** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a -** read transaction for schema S of -** [database connection] D such that the read transaction -** refers to historical [snapshot] P, rather than the most -** recent change to the database. -** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success -** or an appropriate [error code] if it fails. +** ^The [sqlite3_snapshot_open(D,S,P)] interface either starts a new read +** transaction or upgrades an existing one for schema S of +** [database connection] D such that the read transaction refers to +** historical [snapshot] P, rather than the most recent change to the +** database. ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK +** on success or an appropriate [error code] if it fails. ** -** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be -** the first operation following the [BEGIN] that takes the schema S -** out of [autocommit mode]. -** ^In other words, schema S must not currently be in -** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the -** database connection D must be out of [autocommit mode]. -** ^A [snapshot] will fail to open if it has been overwritten by a -** [checkpoint]. +** ^In order to succeed, the database connection must not be in +** [autocommit mode] when [sqlite3_snapshot_open(D,S,P)] is called. If there +** is already a read transaction open on schema S, then the database handle +** must have no active statements (SELECT statements that have been passed +** to sqlite3_step() but not sqlite3_reset() or sqlite3_finalize()). +** SQLITE_ERROR is returned if either of these conditions is violated, or +** if schema S does not exist, or if the snapshot object is invalid. +** +** ^A call to sqlite3_snapshot_open() will fail to open if the specified +** snapshot has been overwritten by a [checkpoint]. In this case +** SQLITE_ERROR_SNAPSHOT is returned. +** +** If there is already a read transaction open when this function is +** invoked, then the same read transaction remains open (on the same +** database snapshot) if SQLITE_ERROR, SQLITE_BUSY or SQLITE_ERROR_SNAPSHOT +** is returned. If another error code - for example SQLITE_PROTOCOL or an +** SQLITE_IOERR error code - is returned, then the final state of the +** read transaction is undefined. If SQLITE_OK is returned, then the +** read transaction is now open on database snapshot P. +** ** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the ** database connection D does not know that the database file for ** schema S is in [WAL mode]. A database connection might not know @@ -8619,7 +9116,7 @@ ** database connection in order to make it ready to use snapshots.) ** ** The [sqlite3_snapshot_open()] interface is only available when the -** SQLITE_ENABLE_SNAPSHOT compile-time option is used. +** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_open( sqlite3 *db, @@ -8629,7 +9126,7 @@ /* ** CAPI3REF: Destroy a snapshot -** EXPERIMENTAL +** DESTRUCTOR: sqlite3_snapshot ** ** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P. ** The application must eventually free every [sqlite3_snapshot] object @@ -8636,13 +9133,13 @@ ** using this routine to avoid a memory leak. ** ** The [sqlite3_snapshot_free()] interface is only available when the -** SQLITE_ENABLE_SNAPSHOT compile-time option is used. +** [SQLITE_ENABLE_SNAPSHOT] compile-time option is used. */ SQLITE_API SQLITE_EXPERIMENTAL void sqlite3_snapshot_free(sqlite3_snapshot*); /* ** CAPI3REF: Compare the ages of two snapshot handles. -** EXPERIMENTAL +** METHOD: sqlite3_snapshot ** ** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages ** of two valid snapshot handles. @@ -8661,6 +9158,9 @@ ** Otherwise, this API returns a negative value if P1 refers to an older ** snapshot than P2, zero if the two handles refer to the same database ** snapshot, and a positive value if P1 is a newer snapshot than P2. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_SNAPSHOT] option. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp( sqlite3_snapshot *p1, @@ -8669,27 +9169,152 @@ /* ** CAPI3REF: Recover snapshots from a wal file -** EXPERIMENTAL +** METHOD: sqlite3_snapshot ** -** If all connections disconnect from a database file but do not perform -** a checkpoint, the existing wal file is opened along with the database -** file the next time the database is opened. At this point it is only -** possible to successfully call sqlite3_snapshot_open() to open the most -** recent snapshot of the database (the one at the head of the wal file), -** even though the wal file may contain other valid snapshots for which -** clients have sqlite3_snapshot handles. +** If a [WAL file] remains on disk after all database connections close +** (either through the use of the [SQLITE_FCNTL_PERSIST_WAL] [file control] +** or because the last process to have the database opened exited without +** calling [sqlite3_close()]) and a new connection is subsequently opened +** on that database and [WAL file], the [sqlite3_snapshot_open()] interface +** will only be able to open the last transaction added to the WAL file +** even though the WAL file contains other valid transactions. ** -** This function attempts to scan the wal file associated with database zDb +** This function attempts to scan the WAL file associated with database zDb ** of database handle db and make all valid snapshots available to ** sqlite3_snapshot_open(). It is an error if there is already a read -** transaction open on the database, or if the database is not a wal mode +** transaction open on the database, or if the database is not a WAL mode ** database. ** ** SQLITE_OK is returned if successful, or an SQLite error code otherwise. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_SNAPSHOT] option. */ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb); /* +** CAPI3REF: Serialize a database +** +** The sqlite3_serialize(D,S,P,F) interface returns a pointer to memory +** that is a serialization of the S database on [database connection] D. +** If P is not a NULL pointer, then the size of the database in bytes +** is written into *P. +** +** For an ordinary on-disk database file, the serialization is just a +** copy of the disk file. For an in-memory database or a "TEMP" database, +** the serialization is the same sequence of bytes which would be written +** to disk if that database where backed up to disk. +** +** The usual case is that sqlite3_serialize() copies the serialization of +** the database into memory obtained from [sqlite3_malloc64()] and returns +** a pointer to that memory. The caller is responsible for freeing the +** returned value to avoid a memory leak. However, if the F argument +** contains the SQLITE_SERIALIZE_NOCOPY bit, then no memory allocations +** are made, and the sqlite3_serialize() function will return a pointer +** to the contiguous memory representation of the database that SQLite +** is currently using for that database, or NULL if the no such contiguous +** memory representation of the database exists. A contiguous memory +** representation of the database will usually only exist if there has +** been a prior call to [sqlite3_deserialize(D,S,...)] with the same +** values of D and S. +** The size of the database is written into *P even if the +** SQLITE_SERIALIZE_NOCOPY bit is set but no contiguous copy +** of the database exists. +** +** A call to sqlite3_serialize(D,S,P,F) might return NULL even if the +** SQLITE_SERIALIZE_NOCOPY bit is omitted from argument F if a memory +** allocation error occurs. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_DESERIALIZE] option. +*/ +SQLITE_API unsigned char *sqlite3_serialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to serialize. ex: "main", "temp", ... */ + sqlite3_int64 *piSize, /* Write size of the DB here, if not NULL */ + unsigned int mFlags /* Zero or more SQLITE_SERIALIZE_* flags */ +); + +/* +** CAPI3REF: Flags for sqlite3_serialize +** +** Zero or more of the following constants can be OR-ed together for +** the F argument to [sqlite3_serialize(D,S,P,F)]. +** +** SQLITE_SERIALIZE_NOCOPY means that [sqlite3_serialize()] will return +** a pointer to contiguous in-memory database that it is currently using, +** without making a copy of the database. If SQLite is not currently using +** a contiguous in-memory database, then this option causes +** [sqlite3_serialize()] to return a NULL pointer. SQLite will only be +** using a contiguous in-memory database if it has been initialized by a +** prior call to [sqlite3_deserialize()]. +*/ +#define SQLITE_SERIALIZE_NOCOPY 0x001 /* Do no memory allocations */ + +/* +** CAPI3REF: Deserialize a database +** +** The sqlite3_deserialize(D,S,P,N,M,F) interface causes the +** [database connection] D to disconnect from database S and then +** reopen S as an in-memory database based on the serialization contained +** in P. The serialized database P is N bytes in size. M is the size of +** the buffer P, which might be larger than N. If M is larger than N, and +** the SQLITE_DESERIALIZE_READONLY bit is not set in F, then SQLite is +** permitted to add content to the in-memory database as long as the total +** size does not exceed M bytes. +** +** If the SQLITE_DESERIALIZE_FREEONCLOSE bit is set in F, then SQLite will +** invoke sqlite3_free() on the serialization buffer when the database +** connection closes. If the SQLITE_DESERIALIZE_RESIZEABLE bit is set, then +** SQLite will try to increase the buffer size using sqlite3_realloc64() +** if writes on the database cause it to grow larger than M bytes. +** +** The sqlite3_deserialize() interface will fail with SQLITE_BUSY if the +** database is currently in a read transaction or is involved in a backup +** operation. +** +** If sqlite3_deserialize(D,S,P,N,M,F) fails for any reason and if the +** SQLITE_DESERIALIZE_FREEONCLOSE bit is set in argument F, then +** [sqlite3_free()] is invoked on argument P prior to returning. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_DESERIALIZE] option. +*/ +SQLITE_API int sqlite3_deserialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to reopen with the deserialization */ + unsigned char *pData, /* The serialized database content */ + sqlite3_int64 szDb, /* Number bytes in the deserialization */ + sqlite3_int64 szBuf, /* Total size of buffer pData[] */ + unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */ +); + +/* +** CAPI3REF: Flags for sqlite3_deserialize() +** +** The following are allowed values for 6th argument (the F argument) to +** the [sqlite3_deserialize(D,S,P,N,M,F)] interface. +** +** The SQLITE_DESERIALIZE_FREEONCLOSE means that the database serialization +** in the P argument is held in memory obtained from [sqlite3_malloc64()] +** and that SQLite should take ownership of this memory and automatically +** free it when it has finished using it. Without this flag, the caller +** is responsible for freeing any dynamically allocated memory. +** +** The SQLITE_DESERIALIZE_RESIZEABLE flag means that SQLite is allowed to +** grow the size of the database using calls to [sqlite3_realloc64()]. This +** flag should only be used if SQLITE_DESERIALIZE_FREEONCLOSE is also used. +** Without this flag, the deserialized database cannot increase in size beyond +** the number of bytes specified by the M parameter. +** +** The SQLITE_DESERIALIZE_READONLY flag means that the deserialized database +** should be treated as read-only. +*/ +#define SQLITE_DESERIALIZE_FREEONCLOSE 1 /* Call sqlite3_free() on close */ +#define SQLITE_DESERIALIZE_RESIZEABLE 2 /* Resize using sqlite3_realloc64() */ +#define SQLITE_DESERIALIZE_READONLY 4 /* Database is read-only */ + +/* ** Undo the hack that converts floating point types to integer for ** builds on processors without floating point support. */ @@ -8800,7 +9425,7 @@ sqlite3_int64 iRowid; /* Rowid for current entry */ sqlite3_rtree_dbl rParentScore; /* Score of parent node */ int eParentWithin; /* Visibility of parent node */ - int eWithin; /* OUT: Visiblity */ + int eWithin; /* OUT: Visibility */ sqlite3_rtree_dbl rScore; /* OUT: Write the score here */ /* The following fields are only available in 3.8.11 and later */ sqlite3_value **apSqlParam; /* Original SQL values of parameters */ @@ -8836,16 +9461,23 @@ /* ** CAPI3REF: Session Object Handle +** +** An instance of this object is a [session] that can be used to +** record changes to a database. */ typedef struct sqlite3_session sqlite3_session; /* ** CAPI3REF: Changeset Iterator Handle +** +** An instance of this object acts as a cursor for iterating +** over the elements of a [changeset] or [patchset]. */ typedef struct sqlite3_changeset_iter sqlite3_changeset_iter; /* ** CAPI3REF: Create A New Session Object +** CONSTRUCTOR: sqlite3_session ** ** Create a new session object attached to database handle db. If successful, ** a pointer to the new object is written to *ppSession and SQLITE_OK is @@ -8882,6 +9514,7 @@ /* ** CAPI3REF: Delete A Session Object +** DESTRUCTOR: sqlite3_session ** ** Delete a session object previously allocated using ** [sqlite3session_create()]. Once a session object has been deleted, the @@ -8897,6 +9530,7 @@ /* ** CAPI3REF: Enable Or Disable A Session Object +** METHOD: sqlite3_session ** ** Enable or disable the recording of changes by a session object. When ** enabled, a session object records changes made to the database. When @@ -8916,6 +9550,7 @@ /* ** CAPI3REF: Set Or Clear the Indirect Change Flag +** METHOD: sqlite3_session ** ** Each change recorded by a session object is marked as either direct or ** indirect. A change is marked as indirect if either: @@ -8945,6 +9580,7 @@ /* ** CAPI3REF: Attach A Table To A Session Object +** METHOD: sqlite3_session ** ** If argument zTab is not NULL, then it is the name of a table to attach ** to the session object passed as the first argument. All subsequent changes @@ -8970,6 +9606,35 @@ ** ** SQLITE_OK is returned if the call completes without error. Or, if an error ** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned. +** +**

      Special sqlite_stat1 Handling

      +** +** As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to +** some of the rules above. In SQLite, the schema of sqlite_stat1 is: +** 
      +**        CREATE TABLE sqlite_stat1(tbl,idx,stat)  
+**
      +** +** Even though sqlite_stat1 does not have a PRIMARY KEY, changes are +** recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes +** are recorded for rows for which (idx IS NULL) is true. However, for such +** rows a zero-length blob (SQL value X'') is stored in the changeset or +** patchset instead of a NULL value. This allows such changesets to be +** manipulated by legacy implementations of sqlite3changeset_invert(), +** concat() and similar. +** +** The sqlite3changeset_apply() function automatically converts the +** zero-length blob back to a NULL value when updating the sqlite_stat1 +** table. However, if the application calls sqlite3changeset_new(), +** sqlite3changeset_old() or sqlite3changeset_conflict on a changeset +** iterator directly (including on a changeset iterator passed to a +** conflict-handler callback) then the X'' value is returned. The application +** must translate X'' to NULL itself if required. +** +** Legacy (older than 3.22.0) versions of the sessions module cannot capture +** changes made to the sqlite_stat1 table. Legacy versions of the +** sqlite3changeset_apply() function silently ignore any modifications to the +** sqlite_stat1 table that are part of a changeset or patchset. */ SQLITE_API int sqlite3session_attach( sqlite3_session *pSession, /* Session object */ @@ -8978,6 +9643,7 @@ /* ** CAPI3REF: Set a table filter on a Session Object. +** METHOD: sqlite3_session ** ** The second argument (xFilter) is the "filter callback". For changes to rows ** in tables that are not attached to the Session object, the filter is called @@ -8996,6 +9662,7 @@ /* ** CAPI3REF: Generate A Changeset From A Session Object +** METHOD: sqlite3_session ** ** Obtain a changeset containing changes to the tables attached to the ** session object passed as the first argument. If successful, @@ -9105,7 +9772,8 @@ ); /* -** CAPI3REF: Load The Difference Between Tables Into A Session +** CAPI3REF: Load The Difference Between Tables Into A Session +** METHOD: sqlite3_session ** ** If it is not already attached to the session object passed as the first ** argument, this function attaches table zTbl in the same manner as the @@ -9170,6 +9838,7 @@ /* ** CAPI3REF: Generate A Patchset From A Session Object +** METHOD: sqlite3_session ** ** The differences between a patchset and a changeset are that: ** @@ -9198,8 +9867,8 @@ */ SQLITE_API int sqlite3session_patchset( sqlite3_session *pSession, /* Session object */ - int *pnPatchset, /* OUT: Size of buffer at *ppChangeset */ - void **ppPatchset /* OUT: Buffer containing changeset */ + int *pnPatchset, /* OUT: Size of buffer at *ppPatchset */ + void **ppPatchset /* OUT: Buffer containing patchset */ ); /* @@ -9221,6 +9890,7 @@ /* ** CAPI3REF: Create An Iterator To Traverse A Changeset +** CONSTRUCTOR: sqlite3_changeset_iter ** ** Create an iterator used to iterate through the contents of a changeset. ** If successful, *pp is set to point to the iterator handle and SQLITE_OK @@ -9251,6 +9921,13 @@ ** consecutively. There is no chance that the iterator will visit a change ** the applies to table X, then one for table Y, and then later on visit ** another change for table X. +** +** The behavior of sqlite3changeset_start_v2() and its streaming equivalent +** may be modified by passing a combination of +** [SQLITE_CHANGESETSTART_INVERT | supported flags] as the 4th parameter. +** +** Note that the sqlite3changeset_start_v2() API is still experimental +** and therefore subject to change. */ SQLITE_API int sqlite3changeset_start( sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */ @@ -9257,10 +9934,30 @@ int nChangeset, /* Size of changeset blob in bytes */ void *pChangeset /* Pointer to blob containing changeset */ ); +SQLITE_API int sqlite3changeset_start_v2( + sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */ + int nChangeset, /* Size of changeset blob in bytes */ + void *pChangeset, /* Pointer to blob containing changeset */ + int flags /* SESSION_CHANGESETSTART_* flags */ +); +/* +** CAPI3REF: Flags for sqlite3changeset_start_v2 +** +** The following flags may passed via the 4th parameter to +** [sqlite3changeset_start_v2] and [sqlite3changeset_start_v2_strm]: +** +**
      SQLITE_CHANGESETAPPLY_INVERT
      +** Invert the changeset while iterating through it. This is equivalent to +** inverting a changeset using sqlite3changeset_invert() before applying it. +** It is an error to specify this flag with a patchset. +*/ +#define SQLITE_CHANGESETSTART_INVERT 0x0002 + /* ** CAPI3REF: Advance A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function may only be used with iterators created by function ** [sqlite3changeset_start()]. If it is called on an iterator passed to @@ -9285,6 +9982,7 @@ /* ** CAPI3REF: Obtain The Current Operation From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -9319,6 +10017,7 @@ /* ** CAPI3REF: Obtain The Primary Key Definition Of A Table +** METHOD: sqlite3_changeset_iter ** ** For each modified table, a changeset includes the following: ** @@ -9350,6 +10049,7 @@ /* ** CAPI3REF: Obtain old.* Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -9380,6 +10080,7 @@ /* ** CAPI3REF: Obtain new.* Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -9413,6 +10114,7 @@ /* ** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function should only be used with iterator objects passed to a ** conflict-handler callback by [sqlite3changeset_apply()] with either @@ -9440,6 +10142,7 @@ /* ** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations +** METHOD: sqlite3_changeset_iter ** ** This function may only be called with an iterator passed to an ** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case @@ -9456,6 +10159,7 @@ /* ** CAPI3REF: Finalize A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function is used to finalize an iterator allocated with ** [sqlite3changeset_start()]. @@ -9472,6 +10176,7 @@ ** to that error is returned by this function. Otherwise, SQLITE_OK is ** returned. This is to allow the following pattern (pseudo-code): ** +** 
       **   sqlite3changeset_start();
 **   while( SQLITE_ROW==sqlite3changeset_next() ){
 **     // Do something with change.
@@ -9480,6 +10185,7 @@
 **   if( rc!=SQLITE_OK ){
 **     // An error has occurred 
 **   }
+**
      */ SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter); @@ -9527,6 +10233,7 @@ ** sqlite3_changegroup object. Calling it produces similar results as the ** following code fragment: ** +** 
       **   sqlite3_changegroup *pGrp;
 **   rc = sqlite3_changegroup_new(&pGrp);
 **   if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
@@ -9537,6 +10244,7 @@
 **     *ppOut = 0;
 **     *pnOut = 0;
 **   }
+**
      ** ** Refer to the sqlite3_changegroup documentation below for details. */ @@ -9552,11 +10260,15 @@ /* ** CAPI3REF: Changegroup Handle +** +** A changegroup is an object used to combine two or more +** [changesets] or [patchsets] */ typedef struct sqlite3_changegroup sqlite3_changegroup; /* ** CAPI3REF: Create A New Changegroup Object +** CONSTRUCTOR: sqlite3_changegroup ** ** An sqlite3_changegroup object is used to combine two or more changesets ** (or patchsets) into a single changeset (or patchset). A single changegroup @@ -9594,6 +10306,7 @@ /* ** CAPI3REF: Add A Changeset To A Changegroup +** METHOD: sqlite3_changegroup ** ** Add all changes within the changeset (or patchset) in buffer pData (size ** nData bytes) to the changegroup. @@ -9671,6 +10384,7 @@ /* ** CAPI3REF: Obtain A Composite Changeset From A Changegroup +** METHOD: sqlite3_changegroup ** ** Obtain a buffer containing a changeset (or patchset) representing the ** current contents of the changegroup. If the inputs to the changegroup @@ -9701,6 +10415,7 @@ /* ** CAPI3REF: Delete A Changegroup Object +** DESTRUCTOR: sqlite3_changegroup */ SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*); @@ -9707,19 +10422,18 @@ /* ** CAPI3REF: Apply A Changeset To A Database ** -** Apply a changeset to a database. This function attempts to update the -** "main" database attached to handle db with the changes found in the -** changeset passed via the second and third arguments. +** Apply a changeset or patchset to a database. These functions attempt to +** update the "main" database attached to handle db with the changes found in +** the changeset passed via the second and third arguments. ** -** The fourth argument (xFilter) passed to this function is the "filter +** The fourth argument (xFilter) passed to these functions is the "filter ** callback". If it is not NULL, then for each table affected by at least one ** change in the changeset, the filter callback is invoked with ** the table name as the second argument, and a copy of the context pointer -** passed as the sixth argument to this function as the first. If the "filter -** callback" returns zero, then no attempt is made to apply any changes to -** the table. Otherwise, if the return value is non-zero or the xFilter -** argument to this function is NULL, all changes related to the table are -** attempted. +** passed as the sixth argument as the first. If the "filter callback" +** returns zero, then no attempt is made to apply any changes to the table. +** Otherwise, if the return value is non-zero or the xFilter argument to +** is NULL, all changes related to the table are attempted. ** ** For each table that is not excluded by the filter callback, this function ** tests that the target database contains a compatible table. A table is @@ -9764,7 +10478,7 @@ ** **
      **
      DELETE Changes
      -** For each DELETE change, this function checks if the target database +** For each DELETE change, the function checks if the target database ** contains a row with the same primary key value (or values) as the ** original row values stored in the changeset. If it does, and the values ** stored in all non-primary key columns also match the values stored in @@ -9809,7 +10523,7 @@ ** [SQLITE_CHANGESET_REPLACE]. ** **
      UPDATE Changes
      -** For each UPDATE change, this function checks if the target database +** For each UPDATE change, the function checks if the target database ** contains a row with the same primary key value (or values) as the ** original row values stored in the changeset. If it does, and the values ** stored in all modified non-primary key columns also match the values @@ -9840,11 +10554,28 @@ ** This can be used to further customize the applications conflict ** resolution strategy. ** -** All changes made by this function are enclosed in a savepoint transaction. +** All changes made by these functions are enclosed in a savepoint transaction. ** If any other error (aside from a constraint failure when attempting to ** write to the target database) occurs, then the savepoint transaction is ** rolled back, restoring the target database to its original state, and an ** SQLite error code returned. +** +** If the output parameters (ppRebase) and (pnRebase) are non-NULL and +** the input is a changeset (not a patchset), then sqlite3changeset_apply_v2() +** may set (*ppRebase) to point to a "rebase" that may be used with the +** sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase) +** is set to the size of the buffer in bytes. It is the responsibility of the +** caller to eventually free any such buffer using sqlite3_free(). The buffer +** is only allocated and populated if one or more conflicts were encountered +** while applying the patchset. See comments surrounding the sqlite3_rebaser +** APIs for further details. +** +** The behavior of sqlite3changeset_apply_v2() and its streaming equivalent +** may be modified by passing a combination of +** [SQLITE_CHANGESETAPPLY_NOSAVEPOINT | supported flags] as the 9th parameter. +** +** Note that the sqlite3changeset_apply_v2() API is still experimental +** and therefore subject to change. */ SQLITE_API int sqlite3changeset_apply( sqlite3 *db, /* Apply change to "main" db of this handle */ @@ -9861,7 +10592,48 @@ ), void *pCtx /* First argument passed to xConflict */ ); +SQLITE_API int sqlite3changeset_apply_v2( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int nChangeset, /* Size of changeset in bytes */ + void *pChangeset, /* Changeset blob */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, /* OUT: Rebase data */ + int flags /* SESSION_CHANGESETAPPLY_* flags */ +); +/* +** CAPI3REF: Flags for sqlite3changeset_apply_v2 +** +** The following flags may passed via the 9th parameter to +** [sqlite3changeset_apply_v2] and [sqlite3changeset_apply_v2_strm]: +** +**
      +**
      SQLITE_CHANGESETAPPLY_NOSAVEPOINT
      +** Usually, the sessions module encloses all operations performed by +** a single call to apply_v2() or apply_v2_strm() in a [SAVEPOINT]. The +** SAVEPOINT is committed if the changeset or patchset is successfully +** applied, or rolled back if an error occurs. Specifying this flag +** causes the sessions module to omit this savepoint. In this case, if the +** caller has an open transaction or savepoint when apply_v2() is called, +** it may revert the partially applied changeset by rolling it back. +** +**
      SQLITE_CHANGESETAPPLY_INVERT
      +** Invert the changeset before applying it. This is equivalent to inverting +** a changeset using sqlite3changeset_invert() before applying it. It is +** an error to specify this flag with a patchset. +*/ +#define SQLITE_CHANGESETAPPLY_NOSAVEPOINT 0x0001 +#define SQLITE_CHANGESETAPPLY_INVERT 0x0002 + /* ** CAPI3REF: Constants Passed To The Conflict Handler ** @@ -9958,7 +10730,162 @@ #define SQLITE_CHANGESET_REPLACE 1 #define SQLITE_CHANGESET_ABORT 2 +/* +** CAPI3REF: Rebasing changesets +** EXPERIMENTAL +** +** Suppose there is a site hosting a database in state S0. And that +** modifications are made that move that database to state S1 and a +** changeset recorded (the "local" changeset). Then, a changeset based +** on S0 is received from another site (the "remote" changeset) and +** applied to the database. The database is then in state +** (S1+"remote"), where the exact state depends on any conflict +** resolution decisions (OMIT or REPLACE) made while applying "remote". +** Rebasing a changeset is to update it to take those conflict +** resolution decisions into account, so that the same conflicts +** do not have to be resolved elsewhere in the network. +** +** For example, if both the local and remote changesets contain an +** INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)": +** +** local: INSERT INTO t1 VALUES(1, 'v1'); +** remote: INSERT INTO t1 VALUES(1, 'v2'); +** +** and the conflict resolution is REPLACE, then the INSERT change is +** removed from the local changeset (it was overridden). Or, if the +** conflict resolution was "OMIT", then the local changeset is modified +** to instead contain: +** +** UPDATE t1 SET b = 'v2' WHERE a=1; +** +** Changes within the local changeset are rebased as follows: +** +**
      +**
      Local INSERT
      +** This may only conflict with a remote INSERT. If the conflict +** resolution was OMIT, then add an UPDATE change to the rebased +** changeset. Or, if the conflict resolution was REPLACE, add +** nothing to the rebased changeset. +** +**
      Local DELETE
      +** This may conflict with a remote UPDATE or DELETE. In both cases the +** only possible resolution is OMIT. If the remote operation was a +** DELETE, then add no change to the rebased changeset. If the remote +** operation was an UPDATE, then the old.* fields of change are updated +** to reflect the new.* values in the UPDATE. +** +**
      Local UPDATE
      +** This may conflict with a remote UPDATE or DELETE. If it conflicts +** with a DELETE, and the conflict resolution was OMIT, then the update +** is changed into an INSERT. Any undefined values in the new.* record +** from the update change are filled in using the old.* values from +** the conflicting DELETE. Or, if the conflict resolution was REPLACE, +** the UPDATE change is simply omitted from the rebased changeset. +** +** If conflict is with a remote UPDATE and the resolution is OMIT, then +** the old.* values are rebased using the new.* values in the remote +** change. Or, if the resolution is REPLACE, then the change is copied +** into the rebased changeset with updates to columns also updated by +** the conflicting remote UPDATE removed. If this means no columns would +** be updated, the change is omitted. +**
      +** +** A local change may be rebased against multiple remote changes +** simultaneously. If a single key is modified by multiple remote +** changesets, they are combined as follows before the local changeset +** is rebased: +** +**
        +**
      • If there has been one or more REPLACE resolutions on a +** key, it is rebased according to a REPLACE. +** +**
      • If there have been no REPLACE resolutions on a key, then +** the local changeset is rebased according to the most recent +** of the OMIT resolutions. +**
      +** +** Note that conflict resolutions from multiple remote changesets are +** combined on a per-field basis, not per-row. This means that in the +** case of multiple remote UPDATE operations, some fields of a single +** local change may be rebased for REPLACE while others are rebased for +** OMIT. +** +** In order to rebase a local changeset, the remote changeset must first +** be applied to the local database using sqlite3changeset_apply_v2() and +** the buffer of rebase information captured. Then: +** +**
        +**
      1. An sqlite3_rebaser object is created by calling +** sqlite3rebaser_create(). +**
      2. The new object is configured with the rebase buffer obtained from +** sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure(). +** If the local changeset is to be rebased against multiple remote +** changesets, then sqlite3rebaser_configure() should be called +** multiple times, in the same order that the multiple +** sqlite3changeset_apply_v2() calls were made. +**
      3. Each local changeset is rebased by calling sqlite3rebaser_rebase(). +**
      4. The sqlite3_rebaser object is deleted by calling +** sqlite3rebaser_delete(). +**
      +*/ +typedef struct sqlite3_rebaser sqlite3_rebaser; + /* +** CAPI3REF: Create a changeset rebaser object. +** EXPERIMENTAL +** +** Allocate a new changeset rebaser object. If successful, set (*ppNew) to +** point to the new object and return SQLITE_OK. Otherwise, if an error +** occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew) +** to NULL. +*/ +SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew); + +/* +** CAPI3REF: Configure a changeset rebaser object. +** EXPERIMENTAL +** +** Configure the changeset rebaser object to rebase changesets according +** to the conflict resolutions described by buffer pRebase (size nRebase +** bytes), which must have been obtained from a previous call to +** sqlite3changeset_apply_v2(). +*/ +SQLITE_API int sqlite3rebaser_configure( + sqlite3_rebaser*, + int nRebase, const void *pRebase +); + +/* +** CAPI3REF: Rebase a changeset +** EXPERIMENTAL +** +** Argument pIn must point to a buffer containing a changeset nIn bytes +** in size. This function allocates and populates a buffer with a copy +** of the changeset rebased rebased according to the configuration of the +** rebaser object passed as the first argument. If successful, (*ppOut) +** is set to point to the new buffer containing the rebased changset and +** (*pnOut) to its size in bytes and SQLITE_OK returned. It is the +** responsibility of the caller to eventually free the new buffer using +** sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut) +** are set to zero and an SQLite error code returned. +*/ +SQLITE_API int sqlite3rebaser_rebase( + sqlite3_rebaser*, + int nIn, const void *pIn, + int *pnOut, void **ppOut +); + +/* +** CAPI3REF: Delete a changeset rebaser object. +** EXPERIMENTAL +** +** Delete the changeset rebaser object and all associated resources. There +** should be one call to this function for each successful invocation +** of sqlite3rebaser_create(). +*/ +SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p); + +/* ** CAPI3REF: Streaming Versions of API functions. ** ** The six streaming API xxx_strm() functions serve similar purposes to the @@ -9966,12 +10893,13 @@ ** ** ** -**
      Streaming functionNon-streaming equivalent
      sqlite3changeset_apply_str[sqlite3changeset_apply] -**
      sqlite3changeset_concat_str[sqlite3changeset_concat] -**
      sqlite3changeset_invert_str[sqlite3changeset_invert] -**
      sqlite3changeset_start_str[sqlite3changeset_start] -**
      sqlite3session_changeset_str[sqlite3session_changeset] -**
      sqlite3session_patchset_str[sqlite3session_patchset] +**
      sqlite3changeset_apply_strm[sqlite3changeset_apply] +**
      sqlite3changeset_apply_strm_v2[sqlite3changeset_apply_v2] +**
      sqlite3changeset_concat_strm[sqlite3changeset_concat] +**
      sqlite3changeset_invert_strm[sqlite3changeset_invert] +**
      sqlite3changeset_start_strm[sqlite3changeset_start] +**
      sqlite3session_changeset_strm[sqlite3session_changeset] +**
      sqlite3session_patchset_strm[sqlite3session_patchset] **
      ** ** Non-streaming functions that accept changesets (or patchsets) as input @@ -10062,6 +10990,23 @@ ), void *pCtx /* First argument passed to xConflict */ ); +SQLITE_API int sqlite3changeset_apply_v2_strm( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */ + void *pIn, /* First arg for xInput */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, + int flags +); SQLITE_API int sqlite3changeset_concat_strm( int (*xInputA)(void *pIn, void *pData, int *pnData), void *pInA, @@ -10081,6 +11026,12 @@ int (*xInput)(void *pIn, void *pData, int *pnData), void *pIn ); +SQLITE_API int sqlite3changeset_start_v2_strm( + sqlite3_changeset_iter **pp, + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int flags +); SQLITE_API int sqlite3session_changeset_strm( sqlite3_session *pSession, int (*xOutput)(void *pOut, const void *pData, int nData), @@ -10099,9 +11050,55 @@ int (*xOutput)(void *pOut, const void *pData, int nData), void *pOut ); +SQLITE_API int sqlite3rebaser_rebase_strm( + sqlite3_rebaser *pRebaser, + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int (*xOutput)(void *pOut, const void *pData, int nData), + void *pOut +); +/* +** CAPI3REF: Configure global parameters +** +** The sqlite3session_config() interface is used to make global configuration +** changes to the sessions module in order to tune it to the specific needs +** of the application. +** +** The sqlite3session_config() interface is not threadsafe. If it is invoked +** while any other thread is inside any other sessions method then the +** results are undefined. Furthermore, if it is invoked after any sessions +** related objects have been created, the results are also undefined. +** +** The first argument to the sqlite3session_config() function must be one +** of the SQLITE_SESSION_CONFIG_XXX constants defined below. The +** interpretation of the (void*) value passed as the second parameter and +** the effect of calling this function depends on the value of the first +** parameter. +** +**
      +**
      SQLITE_SESSION_CONFIG_STRMSIZE
      +** By default, the sessions module streaming interfaces attempt to input +** and output data in approximately 1 KiB chunks. This operand may be used +** to set and query the value of this configuration setting. The pointer +** passed as the second argument must point to a value of type (int). +** If this value is greater than 0, it is used as the new streaming data +** chunk size for both input and output. Before returning, the (int) value +** pointed to by pArg is set to the final value of the streaming interface +** chunk size. +**
      +** +** This function returns SQLITE_OK if successful, or an SQLite error code +** otherwise. +*/ +SQLITE_API int sqlite3session_config(int op, void *pArg); /* +** CAPI3REF: Values for sqlite3session_config(). +*/ +#define SQLITE_SESSION_CONFIG_STRMSIZE 1 + +/* ** Make sure we can call this stuff from C++. */ #ifdef __cplusplus @@ -10557,7 +11554,7 @@ ** This way, even if the tokenizer does not provide synonyms ** when tokenizing query text (it should not - to do would be ** inefficient), it doesn't matter if the user queries for -** 'first + place' or '1st + place', as there are entires in the +** 'first + place' or '1st + place', as there are entries in the ** FTS index corresponding to both forms of the first token. ** ** @@ -10585,7 +11582,7 @@ ** extra data to the FTS index or require FTS5 to query for multiple terms, ** so it is efficient in terms of disk space and query speed. However, it ** does not support prefix queries very well. If, as suggested above, the -** token "first" is subsituted for "1st" by the tokenizer, then the query: +** token "first" is substituted for "1st" by the tokenizer, then the query: ** ** ** ... MATCH '1s*' --- contrib/sqlite3/sqlite3ext.h.orig +++ contrib/sqlite3/sqlite3ext.h @@ -134,7 +134,7 @@ int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*, const char*,const char*),void*); void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*)); - char * (*snprintf)(int,char*,const char*,...); + char * (*xsnprintf)(int,char*,const char*,...); int (*step)(sqlite3_stmt*); int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*, char const**,char const**,int*,int*,int*); @@ -246,7 +246,7 @@ int (*uri_boolean)(const char*,const char*,int); sqlite3_int64 (*uri_int64)(const char*,const char*,sqlite3_int64); const char *(*uri_parameter)(const char*,const char*); - char *(*vsnprintf)(int,char*,const char*,va_list); + char *(*xvsnprintf)(int,char*,const char*,va_list); int (*wal_checkpoint_v2)(sqlite3*,const char*,int,int*,int*); /* Version 3.8.7 and later */ int (*auto_extension)(void(*)(void)); @@ -292,6 +292,33 @@ int (*bind_pointer)(sqlite3_stmt*,int,void*,const char*,void(*)(void*)); void (*result_pointer)(sqlite3_context*,void*,const char*,void(*)(void*)); void *(*value_pointer)(sqlite3_value*,const char*); + int (*vtab_nochange)(sqlite3_context*); + int (*value_nochange)(sqlite3_value*); + const char *(*vtab_collation)(sqlite3_index_info*,int); + /* Version 3.24.0 and later */ + int (*keyword_count)(void); + int (*keyword_name)(int,const char**,int*); + int (*keyword_check)(const char*,int); + sqlite3_str *(*str_new)(sqlite3*); + char *(*str_finish)(sqlite3_str*); + void (*str_appendf)(sqlite3_str*, const char *zFormat, ...); + void (*str_vappendf)(sqlite3_str*, const char *zFormat, va_list); + void (*str_append)(sqlite3_str*, const char *zIn, int N); + void (*str_appendall)(sqlite3_str*, const char *zIn); + void (*str_appendchar)(sqlite3_str*, int N, char C); + void (*str_reset)(sqlite3_str*); + int (*str_errcode)(sqlite3_str*); + int (*str_length)(sqlite3_str*); + char *(*str_value)(sqlite3_str*); + /* Version 3.25.0 and later */ + int (*create_window_function)(sqlite3*,const char*,int,int,void*, + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInv)(sqlite3_context*,int,sqlite3_value**), + void(*xDestroy)(void*)); + /* Version 3.26.0 and later */ + const char *(*normalized_sql)(sqlite3_stmt*); }; /* @@ -418,7 +445,7 @@ #define sqlite3_rollback_hook sqlite3_api->rollback_hook #define sqlite3_set_authorizer sqlite3_api->set_authorizer #define sqlite3_set_auxdata sqlite3_api->set_auxdata -#define sqlite3_snprintf sqlite3_api->snprintf +#define sqlite3_snprintf sqlite3_api->xsnprintf #define sqlite3_step sqlite3_api->step #define sqlite3_table_column_metadata sqlite3_api->table_column_metadata #define sqlite3_thread_cleanup sqlite3_api->thread_cleanup @@ -442,7 +469,7 @@ #define sqlite3_value_text16le sqlite3_api->value_text16le #define sqlite3_value_type sqlite3_api->value_type #define sqlite3_vmprintf sqlite3_api->vmprintf -#define sqlite3_vsnprintf sqlite3_api->vsnprintf +#define sqlite3_vsnprintf sqlite3_api->xvsnprintf #define sqlite3_overload_function sqlite3_api->overload_function #define sqlite3_prepare_v2 sqlite3_api->prepare_v2 #define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2 @@ -518,7 +545,7 @@ #define sqlite3_uri_boolean sqlite3_api->uri_boolean #define sqlite3_uri_int64 sqlite3_api->uri_int64 #define sqlite3_uri_parameter sqlite3_api->uri_parameter -#define sqlite3_uri_vsnprintf sqlite3_api->vsnprintf +#define sqlite3_uri_vsnprintf sqlite3_api->xvsnprintf #define sqlite3_wal_checkpoint_v2 sqlite3_api->wal_checkpoint_v2 /* Version 3.8.7 and later */ #define sqlite3_auto_extension sqlite3_api->auto_extension @@ -558,6 +585,29 @@ #define sqlite3_bind_pointer sqlite3_api->bind_pointer #define sqlite3_result_pointer sqlite3_api->result_pointer #define sqlite3_value_pointer sqlite3_api->value_pointer +/* Version 3.22.0 and later */ +#define sqlite3_vtab_nochange sqlite3_api->vtab_nochange +#define sqlite3_value_nochange sqlite3_api->value_nochange +#define sqlite3_vtab_collation sqlite3_api->vtab_collation +/* Version 3.24.0 and later */ +#define sqlite3_keyword_count sqlite3_api->keyword_count +#define sqlite3_keyword_name sqlite3_api->keyword_name +#define sqlite3_keyword_check sqlite3_api->keyword_check +#define sqlite3_str_new sqlite3_api->str_new +#define sqlite3_str_finish sqlite3_api->str_finish +#define sqlite3_str_appendf sqlite3_api->str_appendf +#define sqlite3_str_vappendf sqlite3_api->str_vappendf +#define sqlite3_str_append sqlite3_api->str_append +#define sqlite3_str_appendall sqlite3_api->str_appendall +#define sqlite3_str_appendchar sqlite3_api->str_appendchar +#define sqlite3_str_reset sqlite3_api->str_reset +#define sqlite3_str_errcode sqlite3_api->str_errcode +#define sqlite3_str_length sqlite3_api->str_length +#define sqlite3_str_value sqlite3_api->str_value +/* Version 3.25.0 and later */ +#define sqlite3_create_window_function sqlite3_api->create_window_function +/* Version 3.26.0 and later */ +#define sqlite3_normalized_sql sqlite3_api->normalized_sql #endif /* !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) */ #if !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) --- contrib/sqlite3/tea/configure.orig +++ contrib/sqlite3/tea/configure @@ -1,6 +1,6 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated by GNU Autoconf 2.69 for sqlite 3.20.0. +# Generated by GNU Autoconf 2.69 for sqlite 3.26.0. # # # Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc. @@ -577,8 +577,8 @@ # Identity of this package. PACKAGE_NAME='sqlite' PACKAGE_TARNAME='sqlite' -PACKAGE_VERSION='3.20.0' -PACKAGE_STRING='sqlite 3.20.0' +PACKAGE_VERSION='3.26.0' +PACKAGE_STRING='sqlite 3.26.0' PACKAGE_BUGREPORT='' PACKAGE_URL='' @@ -1292,7 +1292,7 @@ # Omit some internal or obsolete options to make the list less imposing. # This message is too long to be a string in the A/UX 3.1 sh. cat <<_ACEOF -\`configure' configures sqlite 3.20.0 to adapt to many kinds of systems. +\`configure' configures sqlite 3.26.0 to adapt to many kinds of systems. Usage: $0 [OPTION]... [VAR=VALUE]... @@ -1353,7 +1353,7 @@ if test -n "$ac_init_help"; then case $ac_init_help in - short | recursive ) echo "Configuration of sqlite 3.20.0:";; + short | recursive ) echo "Configuration of sqlite 3.26.0:";; esac cat <<\_ACEOF @@ -1455,7 +1455,7 @@ test -n "$ac_init_help" && exit $ac_status if $ac_init_version; then cat <<\_ACEOF -sqlite configure 3.20.0 +sqlite configure 3.26.0 generated by GNU Autoconf 2.69 Copyright (C) 2012 Free Software Foundation, Inc. @@ -1866,7 +1866,7 @@ This file contains any messages produced by compilers while running configure, to aid debugging if configure makes a mistake. -It was created by sqlite $as_me 3.20.0, which was +It was created by sqlite $as_me 3.26.0, which was generated by GNU Autoconf 2.69. Invocation command line was $ $0 $@ @@ -9361,7 +9361,7 @@ # report actual input values of CONFIG_FILES etc. instead of their # values after options handling. ac_log=" -This file was extended by sqlite $as_me 3.20.0, which was +This file was extended by sqlite $as_me 3.26.0, which was generated by GNU Autoconf 2.69. Invocation command line was CONFIG_FILES = $CONFIG_FILES @@ -9414,7 +9414,7 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 ac_cs_config="`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`" ac_cs_version="\\ -sqlite config.status 3.20.0 +sqlite config.status 3.26.0 configured by $0, generated by GNU Autoconf 2.69, with options \\"\$ac_cs_config\\" --- contrib/sqlite3/tea/configure.ac.orig +++ contrib/sqlite3/tea/configure.ac @@ -19,7 +19,7 @@ # so you can encode the package version directly into the source files. #----------------------------------------------------------------------- -AC_INIT([sqlite], [3.20.0]) +AC_INIT([sqlite], [3.26.0]) #-------------------------------------------------------------------- # Call TEA_INIT as the first TEA_ macro to set up initial vars. --- contrib/sqlite3/tea/generic/tclsqlite3.c.orig +++ contrib/sqlite3/tea/generic/tclsqlite3.c @@ -19,17 +19,19 @@ ** ** Compile-time options: ** -** -DTCLSH=1 Add a "main()" routine that works as a tclsh. +** -DTCLSH Add a "main()" routine that works as a tclsh. ** -** -DSQLITE_TCLMD5 When used in conjuction with -DTCLSH=1, add -** four new commands to the TCL interpreter for -** generating MD5 checksums: md5, md5file, -** md5-10x8, and md5file-10x8. +** -DTCLSH_INIT_PROC=name ** -** -DSQLITE_TEST When used in conjuction with -DTCLSH=1, add -** hundreds of new commands used for testing -** SQLite. This option implies -DSQLITE_TCLMD5. +** Invoke name(interp) to initialize the Tcl interpreter. +** If name(interp) returns a non-NULL string, then run +** that string as a Tcl script to launch the application. +** If name(interp) returns NULL, then run the regular +** tclsh-emulator code. */ +#ifdef TCLSH_INIT_PROC +# define TCLSH 1 +#endif /* ** If requested, include the SQLite compiler options file for MSVC. @@ -63,13 +65,18 @@ /* Used to get the current process ID */ #if !defined(_WIN32) +# include # include # define GETPID getpid #elif !defined(_WIN32_WCE) # ifndef SQLITE_AMALGAMATION -# define WIN32_LEAN_AND_MEAN +# ifndef WIN32_LEAN_AND_MEAN +# define WIN32_LEAN_AND_MEAN +# endif # include # endif +# include +# define isatty(h) _isatty(h) # define GETPID (int)GetCurrentProcessId #endif @@ -649,7 +656,7 @@ } case SQLITE_TRACE_PROFILE: { sqlite3_stmt *pStmt = (sqlite3_stmt *)pd; - sqlite3_int64 ns = (sqlite3_int64)xd; + sqlite3_int64 ns = *(sqlite3_int64*)xd; pCmd = Tcl_NewStringObj(pDb->zTraceV2, -1); Tcl_IncrRefCount(pCmd); @@ -1849,35 +1856,35 @@ int choice; int rc = TCL_OK; static const char *DB_strs[] = { - "authorizer", "backup", "busy", - "cache", "changes", "close", - "collate", "collation_needed", "commit_hook", - "complete", "copy", "enable_load_extension", - "errorcode", "eval", "exists", - "function", "incrblob", "interrupt", - "last_insert_rowid", "nullvalue", "onecolumn", - "preupdate", "profile", "progress", - "rekey", "restore", "rollback_hook", - "status", "timeout", "total_changes", - "trace", "trace_v2", "transaction", - "unlock_notify", "update_hook", "version", - "wal_hook", - 0 + "authorizer", "backup", "busy", + "cache", "changes", "close", + "collate", "collation_needed", "commit_hook", + "complete", "copy", "deserialize", + "enable_load_extension", "errorcode", "eval", + "exists", "function", "incrblob", + "interrupt", "last_insert_rowid", "nullvalue", + "onecolumn", "preupdate", "profile", + "progress", "rekey", "restore", + "rollback_hook", "serialize", "status", + "timeout", "total_changes", "trace", + "trace_v2", "transaction", "unlock_notify", + "update_hook", "version", "wal_hook", + 0 }; enum DB_enum { - DB_AUTHORIZER, DB_BACKUP, DB_BUSY, - DB_CACHE, DB_CHANGES, DB_CLOSE, - DB_COLLATE, DB_COLLATION_NEEDED, DB_COMMIT_HOOK, - DB_COMPLETE, DB_COPY, DB_ENABLE_LOAD_EXTENSION, - DB_ERRORCODE, DB_EVAL, DB_EXISTS, - DB_FUNCTION, DB_INCRBLOB, DB_INTERRUPT, - DB_LAST_INSERT_ROWID, DB_NULLVALUE, DB_ONECOLUMN, - DB_PREUPDATE, DB_PROFILE, DB_PROGRESS, - DB_REKEY, DB_RESTORE, DB_ROLLBACK_HOOK, - DB_STATUS, DB_TIMEOUT, DB_TOTAL_CHANGES, - DB_TRACE, DB_TRACE_V2, DB_TRANSACTION, - DB_UNLOCK_NOTIFY, DB_UPDATE_HOOK, DB_VERSION, - DB_WAL_HOOK, + DB_AUTHORIZER, DB_BACKUP, DB_BUSY, + DB_CACHE, DB_CHANGES, DB_CLOSE, + DB_COLLATE, DB_COLLATION_NEEDED, DB_COMMIT_HOOK, + DB_COMPLETE, DB_COPY, DB_DESERIALIZE, + DB_ENABLE_LOAD_EXTENSION, DB_ERRORCODE, DB_EVAL, + DB_EXISTS, DB_FUNCTION, DB_INCRBLOB, + DB_INTERRUPT, DB_LAST_INSERT_ROWID, DB_NULLVALUE, + DB_ONECOLUMN, DB_PREUPDATE, DB_PROFILE, + DB_PROGRESS, DB_REKEY, DB_RESTORE, + DB_ROLLBACK_HOOK, DB_SERIALIZE, DB_STATUS, + DB_TIMEOUT, DB_TOTAL_CHANGES, DB_TRACE, + DB_TRACE_V2, DB_TRANSACTION, DB_UNLOCK_NOTIFY, + DB_UPDATE_HOOK, DB_VERSION, DB_WAL_HOOK }; /* don't leave trailing commas on DB_enum, it confuses the AIX xlc compiler */ @@ -2416,6 +2423,53 @@ } /* + ** $db deserialize ?DATABASE? VALUE + ** + ** Reopen DATABASE (default "main") using the content in $VALUE + */ + case DB_DESERIALIZE: { +#ifndef SQLITE_ENABLE_DESERIALIZE + Tcl_AppendResult(interp, "MEMDB not available in this build", + (char*)0); + rc = TCL_ERROR; +#else + const char *zSchema; + Tcl_Obj *pValue; + unsigned char *pBA; + unsigned char *pData; + int len, xrc; + + if( objc==3 ){ + zSchema = 0; + pValue = objv[2]; + }else if( objc==4 ){ + zSchema = Tcl_GetString(objv[2]); + pValue = objv[3]; + }else{ + Tcl_WrongNumArgs(interp, 2, objv, "?DATABASE? VALUE"); + rc = TCL_ERROR; + break; + } + pBA = Tcl_GetByteArrayFromObj(pValue, &len); + pData = sqlite3_malloc64( len ); + if( pData==0 && len>0 ){ + Tcl_AppendResult(interp, "out of memory", (char*)0); + rc = TCL_ERROR; + }else{ + if( len>0 ) memcpy(pData, pBA, len); + xrc = sqlite3_deserialize(pDb->db, zSchema, pData, len, len, + SQLITE_DESERIALIZE_FREEONCLOSE | + SQLITE_DESERIALIZE_RESIZEABLE); + if( xrc ){ + Tcl_AppendResult(interp, "unable to set MEMDB content", (char*)0); + rc = TCL_ERROR; + } + } +#endif + break; + } + + /* ** $db enable_load_extension BOOLEAN ** ** Turn the extension loading feature on or off. It if off by @@ -2891,6 +2945,39 @@ } /* + ** $db serialize ?DATABASE? + ** + ** Return a serialization of a database. + */ + case DB_SERIALIZE: { +#ifndef SQLITE_ENABLE_DESERIALIZE + Tcl_AppendResult(interp, "MEMDB not available in this build", + (char*)0); + rc = TCL_ERROR; +#else + const char *zSchema = objc>=3 ? Tcl_GetString(objv[2]) : "main"; + sqlite3_int64 sz = 0; + unsigned char *pData; + if( objc!=2 && objc!=3 ){ + Tcl_WrongNumArgs(interp, 2, objv, "?DATABASE?"); + rc = TCL_ERROR; + }else{ + int needFree; + pData = sqlite3_serialize(pDb->db, zSchema, &sz, SQLITE_SERIALIZE_NOCOPY); + if( pData ){ + needFree = 0; + }else{ + pData = sqlite3_serialize(pDb->db, zSchema, &sz, 0); + needFree = 1; + } + Tcl_SetObjResult(interp, Tcl_NewByteArrayObj(pData,sz)); + if( needFree ) sqlite3_free(pData); + } +#endif + break; + } + + /* ** $db status (step|sort|autoindex|vmstep) ** ** Display SQLITE_STMTSTATUS_FULLSCAN_STEP or @@ -3291,7 +3378,42 @@ ** Return the version string for this database. */ case DB_VERSION: { - Tcl_SetResult(interp, (char *)sqlite3_libversion(), TCL_STATIC); + int i; + for(i=2; ibLegacyPrepare) ){ + return TCL_ERROR; + } + }else + + /* $db version -last-stmt-ptr + ** + ** Return a string which is a hex encoding of the pointer to the + ** most recent sqlite3_stmt in the statement cache. + */ + if( strcmp(zArg, "-last-stmt-ptr")==0 ){ + char zBuf[100]; + sqlite3_snprintf(sizeof(zBuf), zBuf, "%p", + pDb->stmtList ? pDb->stmtList->pStmt: 0); + Tcl_SetResult(interp, zBuf, TCL_VOLATILE); + }else +#endif /* SQLITE_TEST */ + { + Tcl_AppendResult(interp, "unknown argument: ", zArg, (char*)0); + return TCL_ERROR; + } + } + if( i==2 ){ + Tcl_SetResult(interp, (char *)sqlite3_libversion(), TCL_STATIC); + } break; } @@ -3316,6 +3438,24 @@ #endif /* SQLITE_TCL_NRE */ /* +** Issue the usage message when the "sqlite3" command arguments are +** incorrect. +*/ +static int sqliteCmdUsage( + Tcl_Interp *interp, + Tcl_Obj *const*objv +){ + Tcl_WrongNumArgs(interp, 1, objv, + "HANDLE ?FILENAME? ?-vfs VFSNAME? ?-readonly BOOLEAN? ?-create BOOLEAN?" + " ?-nomutex BOOLEAN? ?-fullmutex BOOLEAN? ?-uri BOOLEAN?" +#if defined(SQLITE_HAS_CODEC) && !defined(SQLITE_OMIT_CODEC_FROM_TCL) + " ?-key CODECKEY?" +#endif + ); + return TCL_ERROR; +} + +/* ** sqlite3 DBNAME FILENAME ?-vfs VFSNAME? ?-key KEY? ?-readonly BOOLEAN? ** ?-create BOOLEAN? ?-nomutex BOOLEAN? ** @@ -3340,7 +3480,7 @@ const char *zArg; char *zErrMsg; int i; - const char *zFile; + const char *zFile = 0; const char *zVfs = 0; int flags; Tcl_DString translatedFilename; @@ -3351,7 +3491,7 @@ int rc; /* In normal use, each TCL interpreter runs in a single thread. So - ** by default, we can turn of mutexing on SQLite database connections. + ** by default, we can turn off mutexing on SQLite database connections. ** However, for testing purposes it is useful to have mutexes turned ** on. So, by default, mutexes default off. But if compiled with ** SQLITE_TCL_DEFAULT_FULLMUTEX then mutexes default on. @@ -3362,6 +3502,7 @@ flags = SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE | SQLITE_OPEN_NOMUTEX; #endif + if( objc==1 ) return sqliteCmdUsage(interp, objv); if( objc==2 ){ zArg = Tcl_GetStringFromObj(objv[1], 0); if( strcmp(zArg,"-version")==0 ){ @@ -3380,18 +3521,26 @@ #endif return TCL_OK; } + if( zArg[0]=='-' ) return sqliteCmdUsage(interp, objv); } - for(i=3; i+1db, flags, zVfs); Tcl_DStringFree(&translatedFilename); @@ -3551,731 +3690,74 @@ int Tclsqlite_Unload(Tcl_Interp *interp, int flags){ return TCL_OK; } #endif -#ifdef TCLSH -/***************************************************************************** -** All of the code that follows is used to build standalone TCL interpreters -** that are statically linked with SQLite. Enable these by compiling -** with -DTCLSH=n where n can be 1 or 2. An n of 1 generates a standard -** tclsh but with SQLite built in. An n of 2 generates the SQLite space -** analysis program. -*/ - -#if defined(SQLITE_TEST) || defined(SQLITE_TCLMD5) /* - * This code implements the MD5 message-digest algorithm. - * The algorithm is due to Ron Rivest. This code was - * written by Colin Plumb in 1993, no copyright is claimed. - * This code is in the public domain; do with it what you wish. - * - * Equivalent code is available from RSA Data Security, Inc. - * This code has been tested against that, and is equivalent, - * except that you don't need to include two pages of legalese - * with every copy. - * - * To compute the message digest of a chunk of bytes, declare an - * MD5Context structure, pass it to MD5Init, call MD5Update as - * needed on buffers full of bytes, and then call MD5Final, which - * will fill a supplied 16-byte array with the digest. - */ - -/* - * If compiled on a machine that doesn't have a 32-bit integer, - * you just set "uint32" to the appropriate datatype for an - * unsigned 32-bit integer. For example: - * - * cc -Duint32='unsigned long' md5.c - * - */ -#ifndef uint32 -# define uint32 unsigned int -#endif - -struct MD5Context { - int isInit; - uint32 buf[4]; - uint32 bits[2]; - unsigned char in[64]; -}; -typedef struct MD5Context MD5Context; - -/* - * Note: this code is harmless on little-endian machines. - */ -static void byteReverse (unsigned char *buf, unsigned longs){ - uint32 t; - do { - t = (uint32)((unsigned)buf[3]<<8 | buf[2]) << 16 | - ((unsigned)buf[1]<<8 | buf[0]); - *(uint32 *)buf = t; - buf += 4; - } while (--longs); -} -/* The four core functions - F1 is optimized somewhat */ - -/* #define F1(x, y, z) (x & y | ~x & z) */ -#define F1(x, y, z) (z ^ (x & (y ^ z))) -#define F2(x, y, z) F1(z, x, y) -#define F3(x, y, z) (x ^ y ^ z) -#define F4(x, y, z) (y ^ (x | ~z)) - -/* This is the central step in the MD5 algorithm. */ -#define MD5STEP(f, w, x, y, z, data, s) \ - ( w += f(x, y, z) + data, w = w<>(32-s), w += x ) - -/* - * The core of the MD5 algorithm, this alters an existing MD5 hash to - * reflect the addition of 16 longwords of new data. MD5Update blocks - * the data and converts bytes into longwords for this routine. - */ -static void MD5Transform(uint32 buf[4], const uint32 in[16]){ - register uint32 a, b, c, d; - - a = buf[0]; - b = buf[1]; - c = buf[2]; - d = buf[3]; - - MD5STEP(F1, a, b, c, d, in[ 0]+0xd76aa478, 7); - MD5STEP(F1, d, a, b, c, in[ 1]+0xe8c7b756, 12); - MD5STEP(F1, c, d, a, b, in[ 2]+0x242070db, 17); - MD5STEP(F1, b, c, d, a, in[ 3]+0xc1bdceee, 22); - MD5STEP(F1, a, b, c, d, in[ 4]+0xf57c0faf, 7); - MD5STEP(F1, d, a, b, c, in[ 5]+0x4787c62a, 12); - MD5STEP(F1, c, d, a, b, in[ 6]+0xa8304613, 17); - MD5STEP(F1, b, c, d, a, in[ 7]+0xfd469501, 22); - MD5STEP(F1, a, b, c, d, in[ 8]+0x698098d8, 7); - MD5STEP(F1, d, a, b, c, in[ 9]+0x8b44f7af, 12); - MD5STEP(F1, c, d, a, b, in[10]+0xffff5bb1, 17); - MD5STEP(F1, b, c, d, a, in[11]+0x895cd7be, 22); - MD5STEP(F1, a, b, c, d, in[12]+0x6b901122, 7); - MD5STEP(F1, d, a, b, c, in[13]+0xfd987193, 12); - MD5STEP(F1, c, d, a, b, in[14]+0xa679438e, 17); - MD5STEP(F1, b, c, d, a, in[15]+0x49b40821, 22); - - MD5STEP(F2, a, b, c, d, in[ 1]+0xf61e2562, 5); - MD5STEP(F2, d, a, b, c, in[ 6]+0xc040b340, 9); - MD5STEP(F2, c, d, a, b, in[11]+0x265e5a51, 14); - MD5STEP(F2, b, c, d, a, in[ 0]+0xe9b6c7aa, 20); - MD5STEP(F2, a, b, c, d, in[ 5]+0xd62f105d, 5); - MD5STEP(F2, d, a, b, c, in[10]+0x02441453, 9); - MD5STEP(F2, c, d, a, b, in[15]+0xd8a1e681, 14); - MD5STEP(F2, b, c, d, a, in[ 4]+0xe7d3fbc8, 20); - MD5STEP(F2, a, b, c, d, in[ 9]+0x21e1cde6, 5); - MD5STEP(F2, d, a, b, c, in[14]+0xc33707d6, 9); - MD5STEP(F2, c, d, a, b, in[ 3]+0xf4d50d87, 14); - MD5STEP(F2, b, c, d, a, in[ 8]+0x455a14ed, 20); - MD5STEP(F2, a, b, c, d, in[13]+0xa9e3e905, 5); - MD5STEP(F2, d, a, b, c, in[ 2]+0xfcefa3f8, 9); - MD5STEP(F2, c, d, a, b, in[ 7]+0x676f02d9, 14); - MD5STEP(F2, b, c, d, a, in[12]+0x8d2a4c8a, 20); - - MD5STEP(F3, a, b, c, d, in[ 5]+0xfffa3942, 4); - MD5STEP(F3, d, a, b, c, in[ 8]+0x8771f681, 11); - MD5STEP(F3, c, d, a, b, in[11]+0x6d9d6122, 16); - MD5STEP(F3, b, c, d, a, in[14]+0xfde5380c, 23); - MD5STEP(F3, a, b, c, d, in[ 1]+0xa4beea44, 4); - MD5STEP(F3, d, a, b, c, in[ 4]+0x4bdecfa9, 11); - MD5STEP(F3, c, d, a, b, in[ 7]+0xf6bb4b60, 16); - MD5STEP(F3, b, c, d, a, in[10]+0xbebfbc70, 23); - MD5STEP(F3, a, b, c, d, in[13]+0x289b7ec6, 4); - MD5STEP(F3, d, a, b, c, in[ 0]+0xeaa127fa, 11); - MD5STEP(F3, c, d, a, b, in[ 3]+0xd4ef3085, 16); - MD5STEP(F3, b, c, d, a, in[ 6]+0x04881d05, 23); - MD5STEP(F3, a, b, c, d, in[ 9]+0xd9d4d039, 4); - MD5STEP(F3, d, a, b, c, in[12]+0xe6db99e5, 11); - MD5STEP(F3, c, d, a, b, in[15]+0x1fa27cf8, 16); - MD5STEP(F3, b, c, d, a, in[ 2]+0xc4ac5665, 23); - - MD5STEP(F4, a, b, c, d, in[ 0]+0xf4292244, 6); - MD5STEP(F4, d, a, b, c, in[ 7]+0x432aff97, 10); - MD5STEP(F4, c, d, a, b, in[14]+0xab9423a7, 15); - MD5STEP(F4, b, c, d, a, in[ 5]+0xfc93a039, 21); - MD5STEP(F4, a, b, c, d, in[12]+0x655b59c3, 6); - MD5STEP(F4, d, a, b, c, in[ 3]+0x8f0ccc92, 10); - MD5STEP(F4, c, d, a, b, in[10]+0xffeff47d, 15); - MD5STEP(F4, b, c, d, a, in[ 1]+0x85845dd1, 21); - MD5STEP(F4, a, b, c, d, in[ 8]+0x6fa87e4f, 6); - MD5STEP(F4, d, a, b, c, in[15]+0xfe2ce6e0, 10); - MD5STEP(F4, c, d, a, b, in[ 6]+0xa3014314, 15); - MD5STEP(F4, b, c, d, a, in[13]+0x4e0811a1, 21); - MD5STEP(F4, a, b, c, d, in[ 4]+0xf7537e82, 6); - MD5STEP(F4, d, a, b, c, in[11]+0xbd3af235, 10); - MD5STEP(F4, c, d, a, b, in[ 2]+0x2ad7d2bb, 15); - MD5STEP(F4, b, c, d, a, in[ 9]+0xeb86d391, 21); - - buf[0] += a; - buf[1] += b; - buf[2] += c; - buf[3] += d; -} - -/* - * Start MD5 accumulation. Set bit count to 0 and buffer to mysterious - * initialization constants. - */ -static void MD5Init(MD5Context *ctx){ - ctx->isInit = 1; - ctx->buf[0] = 0x67452301; - ctx->buf[1] = 0xefcdab89; - ctx->buf[2] = 0x98badcfe; - ctx->buf[3] = 0x10325476; - ctx->bits[0] = 0; - ctx->bits[1] = 0; -} - -/* - * Update context to reflect the concatenation of another buffer full - * of bytes. - */ -static -void MD5Update(MD5Context *ctx, const unsigned char *buf, unsigned int len){ - uint32 t; - - /* Update bitcount */ - - t = ctx->bits[0]; - if ((ctx->bits[0] = t + ((uint32)len << 3)) < t) - ctx->bits[1]++; /* Carry from low to high */ - ctx->bits[1] += len >> 29; - - t = (t >> 3) & 0x3f; /* Bytes already in shsInfo->data */ - - /* Handle any leading odd-sized chunks */ - - if ( t ) { - unsigned char *p = (unsigned char *)ctx->in + t; - - t = 64-t; - if (len < t) { - memcpy(p, buf, len); - return; - } - memcpy(p, buf, t); - byteReverse(ctx->in, 16); - MD5Transform(ctx->buf, (uint32 *)ctx->in); - buf += t; - len -= t; - } - - /* Process data in 64-byte chunks */ - - while (len >= 64) { - memcpy(ctx->in, buf, 64); - byteReverse(ctx->in, 16); - MD5Transform(ctx->buf, (uint32 *)ctx->in); - buf += 64; - len -= 64; - } - - /* Handle any remaining bytes of data. */ - - memcpy(ctx->in, buf, len); -} - -/* - * Final wrapup - pad to 64-byte boundary with the bit pattern - * 1 0* (64-bit count of bits processed, MSB-first) - */ -static void MD5Final(unsigned char digest[16], MD5Context *ctx){ - unsigned count; - unsigned char *p; - - /* Compute number of bytes mod 64 */ - count = (ctx->bits[0] >> 3) & 0x3F; - - /* Set the first char of padding to 0x80. This is safe since there is - always at least one byte free */ - p = ctx->in + count; - *p++ = 0x80; - - /* Bytes of padding needed to make 64 bytes */ - count = 64 - 1 - count; - - /* Pad out to 56 mod 64 */ - if (count < 8) { - /* Two lots of padding: Pad the first block to 64 bytes */ - memset(p, 0, count); - byteReverse(ctx->in, 16); - MD5Transform(ctx->buf, (uint32 *)ctx->in); - - /* Now fill the next block with 56 bytes */ - memset(ctx->in, 0, 56); - } else { - /* Pad block to 56 bytes */ - memset(p, 0, count-8); - } - byteReverse(ctx->in, 14); - - /* Append length in bits and transform */ - memcpy(ctx->in + 14*4, ctx->bits, 8); - - MD5Transform(ctx->buf, (uint32 *)ctx->in); - byteReverse((unsigned char *)ctx->buf, 4); - memcpy(digest, ctx->buf, 16); -} - -/* -** Convert a 128-bit MD5 digest into a 32-digit base-16 number. +** If the TCLSH macro is defined, add code to make a stand-alone program. */ -static void MD5DigestToBase16(unsigned char *digest, char *zBuf){ - static char const zEncode[] = "0123456789abcdef"; - int i, j; +#if defined(TCLSH) - for(j=i=0; i<16; i++){ - int a = digest[i]; - zBuf[j++] = zEncode[(a>>4)&0xf]; - zBuf[j++] = zEncode[a & 0xf]; - } - zBuf[j] = 0; -} - - -/* -** Convert a 128-bit MD5 digest into sequency of eight 5-digit integers -** each representing 16 bits of the digest and separated from each -** other by a "-" character. +/* This is the main routine for an ordinary TCL shell. If there are +** are arguments, run the first argument as a script. Otherwise, +** read TCL commands from standard input */ -static void MD5DigestToBase10x8(unsigned char digest[16], char zDigest[50]){ - int i, j; - unsigned int x; - for(i=j=0; i<16; i+=2){ - x = digest[i]*256 + digest[i+1]; - if( i>0 ) zDigest[j++] = '-'; - sqlite3_snprintf(50-j, &zDigest[j], "%05u", x); - j += 5; - } - zDigest[j] = 0; -} - -/* -** A TCL command for md5. The argument is the text to be hashed. The -** Result is the hash in base64. -*/ -static int SQLITE_TCLAPI md5_cmd( - void*cd, - Tcl_Interp *interp, - int argc, - const char **argv -){ - MD5Context ctx; - unsigned char digest[16]; - char zBuf[50]; - void (*converter)(unsigned char*, char*); - - if( argc!=2 ){ - Tcl_AppendResult(interp,"wrong # args: should be \"", argv[0], - " TEXT\"", (char*)0); - return TCL_ERROR; - } - MD5Init(&ctx); - MD5Update(&ctx, (unsigned char*)argv[1], (unsigned)strlen(argv[1])); - MD5Final(digest, &ctx); - converter = (void(*)(unsigned char*,char*))cd; - converter(digest, zBuf); - Tcl_AppendResult(interp, zBuf, (char*)0); - return TCL_OK; -} - -/* -** A TCL command to take the md5 hash of a file. The argument is the -** name of the file. -*/ -static int SQLITE_TCLAPI md5file_cmd( - void*cd, - Tcl_Interp *interp, - int argc, - const char **argv -){ - FILE *in; - MD5Context ctx; - void (*converter)(unsigned char*, char*); - unsigned char digest[16]; - char zBuf[10240]; - - if( argc!=2 ){ - Tcl_AppendResult(interp,"wrong # args: should be \"", argv[0], - " FILENAME\"", (char*)0); - return TCL_ERROR; - } - in = fopen(argv[1],"rb"); - if( in==0 ){ - Tcl_AppendResult(interp,"unable to open file \"", argv[1], - "\" for reading", (char*)0); - return TCL_ERROR; - } - MD5Init(&ctx); - for(;;){ - int n; - n = (int)fread(zBuf, 1, sizeof(zBuf), in); - if( n<=0 ) break; - MD5Update(&ctx, (unsigned char*)zBuf, (unsigned)n); - } - fclose(in); - MD5Final(digest, &ctx); - converter = (void(*)(unsigned char*,char*))cd; - converter(digest, zBuf); - Tcl_AppendResult(interp, zBuf, (char*)0); - return TCL_OK; -} - -/* -** Register the four new TCL commands for generating MD5 checksums -** with the TCL interpreter. -*/ -int Md5_Init(Tcl_Interp *interp){ - Tcl_CreateCommand(interp, "md5", (Tcl_CmdProc*)md5_cmd, - MD5DigestToBase16, 0); - Tcl_CreateCommand(interp, "md5-10x8", (Tcl_CmdProc*)md5_cmd, - MD5DigestToBase10x8, 0); - Tcl_CreateCommand(interp, "md5file", (Tcl_CmdProc*)md5file_cmd, - MD5DigestToBase16, 0); - Tcl_CreateCommand(interp, "md5file-10x8", (Tcl_CmdProc*)md5file_cmd, - MD5DigestToBase10x8, 0); - return TCL_OK; -} -#endif /* defined(SQLITE_TEST) || defined(SQLITE_TCLMD5) */ - -#if defined(SQLITE_TEST) -/* -** During testing, the special md5sum() aggregate function is available. -** inside SQLite. The following routines implement that function. -*/ -static void md5step(sqlite3_context *context, int argc, sqlite3_value **argv){ - MD5Context *p; - int i; - if( argc<1 ) return; - p = sqlite3_aggregate_context(context, sizeof(*p)); - if( p==0 ) return; - if( !p->isInit ){ - MD5Init(p); - } - for(i=0; i \"\n" - "} else {\n" - "puts -nonewline \"% \"\n" - "}\n" - "flush stdout\n" - "append line [gets stdin]\n" - "if {[info complete $line]} {\n" - "if {[catch {uplevel #0 $line} result]} {\n" - "puts stderr \"Error: $result\"\n" - "} elseif {$result!=\"\"} {\n" - "puts $result\n" + "if {[llength $argv]>=1} {\n" + "set argv0 [lindex $argv 0]\n" + "set argv [lrange $argv 1 end]\n" + "source $argv0\n" + "} else {\n" + "set line {}\n" + "while {![eof stdin]} {\n" + "if {$line!=\"\"} {\n" + "puts -nonewline \"> \"\n" + "} else {\n" + "puts -nonewline \"% \"\n" "}\n" - "set line {}\n" - "} else {\n" - "append line \\n\n" + "flush stdout\n" + "append line [gets stdin]\n" + "if {[info complete $line]} {\n" + "if {[catch {uplevel #0 $line} result]} {\n" + "puts stderr \"Error: $result\"\n" + "} elseif {$result!=\"\"} {\n" + "puts $result\n" + "}\n" + "set line {}\n" + "} else {\n" + "append line \\n\n" + "}\n" "}\n" "}\n" ; return zMainloop; } -#endif -#if TCLSH==2 -static const char *tclsh_main_loop(void); -#endif -#ifdef SQLITE_TEST -static void init_all(Tcl_Interp *); -static int SQLITE_TCLAPI init_all_cmd( - ClientData cd, - Tcl_Interp *interp, - int objc, - Tcl_Obj *CONST objv[] -){ - - Tcl_Interp *slave; - if( objc!=2 ){ - Tcl_WrongNumArgs(interp, 1, objv, "SLAVE"); - return TCL_ERROR; - } - - slave = Tcl_GetSlave(interp, Tcl_GetString(objv[1])); - if( !slave ){ - return TCL_ERROR; - } - - init_all(slave); - return TCL_OK; -} - -/* -** Tclcmd: db_use_legacy_prepare DB BOOLEAN -** -** The first argument to this command must be a database command created by -** [sqlite3]. If the second argument is true, then the handle is configured -** to use the sqlite3_prepare_v2() function to prepare statements. If it -** is false, sqlite3_prepare(). -*/ -static int SQLITE_TCLAPI db_use_legacy_prepare_cmd( - ClientData cd, - Tcl_Interp *interp, - int objc, - Tcl_Obj *CONST objv[] -){ - Tcl_CmdInfo cmdInfo; - SqliteDb *pDb; - int bPrepare; - - if( objc!=3 ){ - Tcl_WrongNumArgs(interp, 1, objv, "DB BOOLEAN"); - return TCL_ERROR; - } - - if( !Tcl_GetCommandInfo(interp, Tcl_GetString(objv[1]), &cmdInfo) ){ - Tcl_AppendResult(interp, "no such db: ", Tcl_GetString(objv[1]), (char*)0); - return TCL_ERROR; - } - pDb = (SqliteDb*)cmdInfo.objClientData; - if( Tcl_GetBooleanFromObj(interp, objv[2], &bPrepare) ){ - return TCL_ERROR; - } - - pDb->bLegacyPrepare = bPrepare; - - Tcl_ResetResult(interp); - return TCL_OK; -} - -/* -** Tclcmd: db_last_stmt_ptr DB -** -** If the statement cache associated with database DB is not empty, -** return the text representation of the most recently used statement -** handle. -*/ -static int SQLITE_TCLAPI db_last_stmt_ptr( - ClientData cd, - Tcl_Interp *interp, - int objc, - Tcl_Obj *CONST objv[] -){ - extern int sqlite3TestMakePointerStr(Tcl_Interp*, char*, void*); - Tcl_CmdInfo cmdInfo; - SqliteDb *pDb; - sqlite3_stmt *pStmt = 0; - char zBuf[100]; - - if( objc!=2 ){ - Tcl_WrongNumArgs(interp, 1, objv, "DB"); - return TCL_ERROR; - } - - if( !Tcl_GetCommandInfo(interp, Tcl_GetString(objv[1]), &cmdInfo) ){ - Tcl_AppendResult(interp, "no such db: ", Tcl_GetString(objv[1]), (char*)0); - return TCL_ERROR; - } - pDb = (SqliteDb*)cmdInfo.objClientData; - - if( pDb->stmtList ) pStmt = pDb->stmtList->pStmt; - if( sqlite3TestMakePointerStr(interp, zBuf, pStmt) ){ - return TCL_ERROR; - } - Tcl_SetResult(interp, zBuf, TCL_VOLATILE); - - return TCL_OK; -} -#endif /* SQLITE_TEST */ - -/* -** Configure the interpreter passed as the first argument to have access -** to the commands and linked variables that make up: -** -** * the [sqlite3] extension itself, -** -** * If SQLITE_TCLMD5 or SQLITE_TEST is defined, the Md5 commands, and -** -** * If SQLITE_TEST is set, the various test interfaces used by the Tcl -** test suite. -*/ -static void init_all(Tcl_Interp *interp){ - Sqlite3_Init(interp); - -#if defined(SQLITE_TEST) || defined(SQLITE_TCLMD5) - Md5_Init(interp); -#endif - -#ifdef SQLITE_TEST - { - extern int Sqliteconfig_Init(Tcl_Interp*); - extern int Sqlitetest1_Init(Tcl_Interp*); - extern int Sqlitetest2_Init(Tcl_Interp*); - extern int Sqlitetest3_Init(Tcl_Interp*); - extern int Sqlitetest4_Init(Tcl_Interp*); - extern int Sqlitetest5_Init(Tcl_Interp*); - extern int Sqlitetest6_Init(Tcl_Interp*); - extern int Sqlitetest7_Init(Tcl_Interp*); - extern int Sqlitetest8_Init(Tcl_Interp*); - extern int Sqlitetest9_Init(Tcl_Interp*); - extern int Sqlitetestasync_Init(Tcl_Interp*); - extern int Sqlitetest_autoext_Init(Tcl_Interp*); - extern int Sqlitetest_blob_Init(Tcl_Interp*); - extern int Sqlitetest_demovfs_Init(Tcl_Interp *); - extern int Sqlitetest_func_Init(Tcl_Interp*); - extern int Sqlitetest_hexio_Init(Tcl_Interp*); - extern int Sqlitetest_init_Init(Tcl_Interp*); - extern int Sqlitetest_malloc_Init(Tcl_Interp*); - extern int Sqlitetest_mutex_Init(Tcl_Interp*); - extern int Sqlitetestschema_Init(Tcl_Interp*); - extern int Sqlitetestsse_Init(Tcl_Interp*); - extern int Sqlitetesttclvar_Init(Tcl_Interp*); - extern int Sqlitetestfs_Init(Tcl_Interp*); - extern int SqlitetestThread_Init(Tcl_Interp*); - extern int SqlitetestOnefile_Init(); - extern int SqlitetestOsinst_Init(Tcl_Interp*); - extern int Sqlitetestbackup_Init(Tcl_Interp*); - extern int Sqlitetestintarray_Init(Tcl_Interp*); - extern int Sqlitetestvfs_Init(Tcl_Interp *); - extern int Sqlitetestrtree_Init(Tcl_Interp*); - extern int Sqlitequota_Init(Tcl_Interp*); - extern int Sqlitemultiplex_Init(Tcl_Interp*); - extern int SqliteSuperlock_Init(Tcl_Interp*); - extern int SqlitetestSyscall_Init(Tcl_Interp*); -#if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK) - extern int TestSession_Init(Tcl_Interp*); -#endif - extern int Fts5tcl_Init(Tcl_Interp *); - extern int SqliteRbu_Init(Tcl_Interp*); - extern int Sqlitetesttcl_Init(Tcl_Interp*); -#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) - extern int Sqlitetestfts3_Init(Tcl_Interp *interp); -#endif - -#ifdef SQLITE_ENABLE_ZIPVFS - extern int Zipvfs_Init(Tcl_Interp*); - Zipvfs_Init(interp); -#endif - - Sqliteconfig_Init(interp); - Sqlitetest1_Init(interp); - Sqlitetest2_Init(interp); - Sqlitetest3_Init(interp); - Sqlitetest4_Init(interp); - Sqlitetest5_Init(interp); - Sqlitetest6_Init(interp); - Sqlitetest7_Init(interp); - Sqlitetest8_Init(interp); - Sqlitetest9_Init(interp); - Sqlitetestasync_Init(interp); - Sqlitetest_autoext_Init(interp); - Sqlitetest_blob_Init(interp); - Sqlitetest_demovfs_Init(interp); - Sqlitetest_func_Init(interp); - Sqlitetest_hexio_Init(interp); - Sqlitetest_init_Init(interp); - Sqlitetest_malloc_Init(interp); - Sqlitetest_mutex_Init(interp); - Sqlitetestschema_Init(interp); - Sqlitetesttclvar_Init(interp); - Sqlitetestfs_Init(interp); - SqlitetestThread_Init(interp); - SqlitetestOnefile_Init(); - SqlitetestOsinst_Init(interp); - Sqlitetestbackup_Init(interp); - Sqlitetestintarray_Init(interp); - Sqlitetestvfs_Init(interp); - Sqlitetestrtree_Init(interp); - Sqlitequota_Init(interp); - Sqlitemultiplex_Init(interp); - SqliteSuperlock_Init(interp); - SqlitetestSyscall_Init(interp); -#if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK) - TestSession_Init(interp); -#endif - Fts5tcl_Init(interp); - SqliteRbu_Init(interp); - Sqlitetesttcl_Init(interp); - -#if defined(SQLITE_ENABLE_FTS3) || defined(SQLITE_ENABLE_FTS4) - Sqlitetestfts3_Init(interp); -#endif - - Tcl_CreateObjCommand( - interp, "load_testfixture_extensions", init_all_cmd, 0, 0 - ); - Tcl_CreateObjCommand( - interp, "db_use_legacy_prepare", db_use_legacy_prepare_cmd, 0, 0 - ); - Tcl_CreateObjCommand( - interp, "db_last_stmt_ptr", db_last_stmt_ptr, 0, 0 - ); - -#ifdef SQLITE_SSE - Sqlitetestsse_Init(interp); -#endif - } -#endif -} - -/* Needed for the setrlimit() system call on unix */ -#if defined(unix) -#include -#endif - #define TCLSH_MAIN main /* Needed to fake out mktclapp */ int SQLITE_CDECL TCLSH_MAIN(int argc, char **argv){ Tcl_Interp *interp; + int i; + const char *zScript = 0; + char zArgc[32]; +#if defined(TCLSH_INIT_PROC) + extern const char *TCLSH_INIT_PROC(Tcl_Interp*); +#endif #if !defined(_WIN32_WCE) - if( getenv("BREAK") ){ - fprintf(stderr, - "attach debugger to process %d and press any key to continue.\n", - GETPID()); - fgetc(stdin); + if( getenv("SQLITE_DEBUG_BREAK") ){ + if( isatty(0) && isatty(2) ){ + fprintf(stderr, + "attach debugger to process %d and press any key to continue.\n", + GETPID()); + fgetc(stdin); + }else{ +#if defined(_WIN32) || defined(WIN32) + DebugBreak(); +#elif defined(SIGTRAP) + raise(SIGTRAP); +#endif + } } #endif - /* Since the primary use case for this binary is testing of SQLite, - ** be sure to generate core files if we crash */ -#if defined(SQLITE_TEST) && defined(unix) - { struct rlimit x; - getrlimit(RLIMIT_CORE, &x); - x.rlim_cur = x.rlim_max; - setrlimit(RLIMIT_CORE, &x); - } -#endif /* SQLITE_TEST && unix */ - - /* Call sqlite3_shutdown() once before doing anything else. This is to ** test that sqlite3_shutdown() can be safely called by a process before ** sqlite3_initialize() is. */ @@ -4284,32 +3766,27 @@ Tcl_FindExecutable(argv[0]); Tcl_SetSystemEncoding(NULL, "utf-8"); interp = Tcl_CreateInterp(); + Sqlite3_Init(interp); -#if TCLSH==2 - sqlite3_config(SQLITE_CONFIG_SINGLETHREAD); + sqlite3_snprintf(sizeof(zArgc), zArgc, "%d", argc-1); + Tcl_SetVar(interp,"argc", zArgc, TCL_GLOBAL_ONLY); + Tcl_SetVar(interp,"argv0",argv[0],TCL_GLOBAL_ONLY); + Tcl_SetVar(interp,"argv", "", TCL_GLOBAL_ONLY); + for(i=1; i=2 ){ - int i; - char zArgc[32]; - sqlite3_snprintf(sizeof(zArgc), zArgc, "%d", argc-(3-TCLSH)); - Tcl_SetVar(interp,"argc", zArgc, TCL_GLOBAL_ONLY); - Tcl_SetVar(interp,"argv0",argv[1],TCL_GLOBAL_ONLY); - Tcl_SetVar(interp,"argv", "", TCL_GLOBAL_ONLY); - for(i=3-TCLSH; i